7 files changed, 196 insertions, 0 deletions
diff --git a/results/classifier/108/other/269 b/results/classifier/108/other/269
new file mode 100644
index 00000000..2b24a250
--- /dev/null
+++ b/results/classifier/108/other/269
@@ -0,0 +1,16 @@
+device: 0.868
+network: 0.830
+performance: 0.761
+permissions: 0.547
+files: 0.546
+graphic: 0.500
+debug: 0.265
+other: 0.253
+semantic: 0.247
+socket: 0.245
+vnc: 0.242
+boot: 0.234
+PID: 0.091
+KVM: 0.028
+
+AIX 7.2 TL4 SP1 cannot IPL with QEMU >2.11.2 ppc64-softmmu
diff --git a/results/classifier/108/other/2690 b/results/classifier/108/other/2690
new file mode 100644
index 00000000..e9ac42aa
--- /dev/null
+++ b/results/classifier/108/other/2690
@@ -0,0 +1,35 @@
+graphic: 0.852
+semantic: 0.814
+device: 0.722
+performance: 0.685
+socket: 0.553
+network: 0.550
+vnc: 0.512
+debug: 0.438
+boot: 0.341
+other: 0.333
+PID: 0.333
+permissions: 0.227
+KVM: 0.139
+files: 0.132
+
+"Guest says index 40947 is available"
+Description of problem:
+As discussed [here](https://github.com/danobi/vmtest/issues/96) I have been running several instances of QEMU in parallel at `SCHED_IDLE`, and I've been getting QGA setup failures.
+Steps to reproduce:
+1. Install [vmtest](https://github.com/danobi/vmtest)
+2. Run lots of copies of the command in the [github issues](https://github.com/danobi/vmtest/issues/96) via `chrt --idle 0`.
+3. Unclear if this is the cause, but then I use the computer in the meantime so probably starve the `SCHED_IDLE` QEMU threads running from 2.
+
+This leads to failures to connect to the guest agent and then at the end I see this:
+
+```
+Guest says index 40947 is available
+    qemu-system-x86_64: Guest says index 40947 is available
+    qemu-system-x86_64: Guest says index 40947 is available
+```
+
+
+The developer of vmtest seemed to think this may be of interest to QEMU developers based on the tone of the [comment they found](https://github.com/danobi/vmtest/issues/96#issuecomment-2483860554) in the QEMU code.
+
+I've now installed QEMU from Git master so I can report back whether the bug still appeared.
diff --git a/results/classifier/108/other/2691 b/results/classifier/108/other/2691
new file mode 100644
index 00000000..b79064d8
--- /dev/null
+++ b/results/classifier/108/other/2691
@@ -0,0 +1,42 @@
+graphic: 0.728
+files: 0.575
+performance: 0.544
+debug: 0.498
+device: 0.497
+PID: 0.439
+semantic: 0.430
+vnc: 0.215
+other: 0.185
+socket: 0.134
+boot: 0.077
+permissions: 0.072
+network: 0.064
+KVM: 0.011
+
+Renesas: test_rx_gdbsim.py test sometime timeouts
+Description of problem:
+```make check-functional``` runs sometime fail with : 
+
+```
+160/164 qemu:func-thorough+func-rx-thorough+thorough / func-rx-rx_gdbsim                                            TIMEOUT          90.03s   killed by signal 15 SIGTERM
+```
+Steps to reproduce:
+1. ./configure --target-list=rx-softmmu
+2. make -j 20
+3. while [ 1 ]; do PYTHONPATH=python:tests/functional QEMU_TEST_QEMU_BINARY=build/qemu-system-rx build/pyvenv/bin/python3 tests/functional/test_rx_gdbsim.py ; done 
+
+It hangs after a few iterations.
+Additional information:
+The test console log file contains:
+   ```
+...
+2024-11-19 11:03:04,123: Run /bin/sh as init process
+2024-11-19 11:03:04,136: 
+2024-11-19 11:03:04,137: Sash command shell (version 1.1.1)
+2024-11-19 11:03:04,137: 
+2024-11-19 11:03:04,145: />sh-sci 88240.serial: overrun error
+2024-11-19 11:03:04,150: sh-sci 88240.serial: frame error
+2024-11-19 11:03:04,156: sh-sci 88240.serial: parity error
+   ```
+
+These errors appear to reflect some problems in the renesas_sci model.
diff --git a/results/classifier/108/other/2693 b/results/classifier/108/other/2693
new file mode 100644
index 00000000..233f6e52
--- /dev/null
+++ b/results/classifier/108/other/2693
@@ -0,0 +1,21 @@
+device: 0.846
+graphic: 0.762
+other: 0.537
+boot: 0.487
+network: 0.480
+debug: 0.332
+files: 0.320
+semantic: 0.270
+vnc: 0.229
+PID: 0.223
+socket: 0.206
+KVM: 0.107
+performance: 0.073
+permissions: 0.010
+
+hv-balloon Migration
+Description of problem:
+since QEMU version 8.2, the hv-balloon feature has been officially merged, but migration is still not supported.
+Are there any planned enhancements to the hv-balloon migration in the near future?
+Steps to reproduce:
+
diff --git a/results/classifier/108/other/2694 b/results/classifier/108/other/2694
new file mode 100644
index 00000000..8518e9d2
--- /dev/null
+++ b/results/classifier/108/other/2694
@@ -0,0 +1,39 @@
+graphic: 0.814
+debug: 0.793
+performance: 0.790
+vnc: 0.782
+semantic: 0.776
+permissions: 0.768
+device: 0.755
+KVM: 0.748
+network: 0.747
+files: 0.724
+PID: 0.724
+other: 0.691
+boot: 0.683
+socket: 0.655
+
+error: implicit declaration of function 'IOMainPort' is invalid in C99
+Description of problem:
+Build in MacOS
+    Hardware Overview:
+
+      Model Name: MacBook Air
+      Chip: Apple M1
+      Total Number of Cores: 8 (4 performance and 4 efficiency)
+      Memory: 16 GB
+Steps to reproduce:
+1. ./configure --cpu=aarch64 --target-list=aarch64-softmmu --enable-slirp
+2. make -j
+Additional information:
+```
+FAILED: libblock.a.p/block_file-posix.c.o
+cc -Ilibblock.a.p -I. -I.. -Iqapi -Itrace -Iui -Iui/shader -Iblock -I/opt/homebrew/opt/zstd/include -I/opt/homebrew/Cellar/glib/2.82.2/include/glib-2.0 -I/opt/homebrew/Cellar/glib/2.82.2/lib/glib-2.0/include -I/opt/homebrew/opt/gettext/include -I/opt/homebrew/Cellar/pcre2/10.44/include -I/opt/homebrew/Cellar/glib/2.82.2/include -fdiagnostics-color=auto -Wall -Winvalid-pch -std=gnu11 -O2 -g -fstack-protector-strong -Wempty-body -Wendif-labels -Wexpansion-to-defined -Wformat-security -Wformat-y2k -Wignored-qualifiers -Winit-self -Wmissing-format-attribute -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wredundant-decls -Wstrict-prototypes -Wtype-limits -Wundef -Wvla -Wwrite-strings -Wno-gnu-variable-sized-type-not-at-end -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-psabi -Wno-shift-negative-value -Wno-string-plus-int -Wno-tautological-type-limit-compare -Wno-typedef-redefinition -iquote . -iquote /Users/august/qemu/src -iquote /Users/august/qemu/src/include -iquote /Users/august/qemu/src/host/include/aarch64 -iquote /Users/august/qemu/src/host/include/generic -iquote /Users/august/qemu/src/tcg/aarch64 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -fno-common -fwrapv -fno-pie -MD -MQ libblock.a.p/block_file-posix.c.o -MF libblock.a.p/block_file-posix.c.o.d -o libblock.a.p/block_file-posix.c.o -c ../block/file-posix.c
+../block/file-posix.c:3940:18: error: implicit declaration of function 'IOMainPort' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
+    kernResult = IOMainPort(MACH_PORT_NULL, &mainPort);
+                 ^
+1 error generated.
+ninja: build stopped: subcommand failed.
+make[1]: *** [run-ninja] Error 1
+make: *** [build] Error 2
+```
diff --git a/results/classifier/108/other/2696 b/results/classifier/108/other/2696
new file mode 100644
index 00000000..367afb46
--- /dev/null
+++ b/results/classifier/108/other/2696
@@ -0,0 +1,27 @@
+device: 0.919
+graphic: 0.893
+PID: 0.863
+network: 0.832
+debug: 0.786
+vnc: 0.783
+files: 0.751
+socket: 0.735
+boot: 0.690
+performance: 0.671
+semantic: 0.660
+permissions: 0.492
+other: 0.463
+KVM: 0.229
+
+qemu-hexagon 9.2.0-rc1 hits unreachable assertion in decode_insns() on invalid instruction
+Description of problem:
+```
+❯ cat start.s
+.globl _start
+_start: .word 0
+❯ clang start.s -target hexagon-linux -nostdlib -fuse-ld=lld
+❯ qemu-hexagon ./a.out
+**
+ERROR:../target/hexagon/decode.c:492:decode_insns: code should not be reached
+Bail out! ERROR:../target/hexagon/decode.c:492:decode_insns: code should not be reached
+```
diff --git a/results/classifier/108/other/2697 b/results/classifier/108/other/2697
new file mode 100644
index 00000000..95a85038
--- /dev/null
+++ b/results/classifier/108/other/2697
@@ -0,0 +1,16 @@
+device: 0.882
+debug: 0.762
+performance: 0.697
+permissions: 0.678
+semantic: 0.438
+graphic: 0.420
+other: 0.259
+PID: 0.200
+boot: 0.200
+socket: 0.166
+vnc: 0.159
+network: 0.149
+files: 0.087
+KVM: 0.034
+
+system/physmem: gdb memory rw no access on armv7m MPU