1 files changed, 0 insertions, 68 deletions
diff --git a/results/classifier/deepseek-2-tmp/output/graphic/1777672 b/results/classifier/deepseek-2-tmp/output/graphic/1777672
deleted file mode 100644
index 565b77af..00000000
--- a/results/classifier/deepseek-2-tmp/output/graphic/1777672
+++ /dev/null
@@ -1,68 +0,0 @@
-
-QEMU raspi virtual/physical frame buffer not implemented
-
-I fully recognize that the error here could be mine, but the code is pretty simple and straightforward; When emulating a Raspberry PI 3 using aarch64 and allocating a virtual framebuffer larger than the physical frambuffer (for double-buffering purposes), the QEMU window shows the full size of the *virtual* framebuffer rather than the size of the *physical* framebuffer.
-
-You can replicate this with code such as:
-
-
-#define FBWIDTH 1024
-#define FBHEIGHT 768
-
-void lfb_init()
-{
-    uart_puts("Initializing Framebuffer\n");
-    mbox[0] = 35*4;
-    mbox[1] = MBOX_REQUEST;
-
-    mbox[2] = 0x48003;  //set phy wh
-    mbox[3] = 8;
-    mbox[4] = 8;
-    mbox[5] = FBWIDTH;         //FrameBufferInfo.width
-    mbox[6] = FBHEIGHT;          //FrameBufferInfo.height
-
-    mbox[7] = 0x48004;  //set virt wh
-    mbox[8] = 8;
-    mbox[9] = 8;
-    mbox[10] = FBWIDTH;        //FrameBufferInfo.virtual_width
-    mbox[11] = FBHEIGHT * 2;         //FrameBufferInfo.virtual_height
-    
-    mbox[12] = 0x48009; //set virt offset
-    mbox[13] = 8;
-    mbox[14] = 8;
-    mbox[15] = 0;           //FrameBufferInfo.x_offset
-    mbox[16] = 0;           //FrameBufferInfo.y.offset
-    
-    mbox[17] = 0x48005; //set depth
-    mbox[18] = 4;
-    mbox[19] = 4;
-    mbox[20] = 32;          //FrameBufferInfo.depth
-
-    mbox[21] = 0x48006; //set pixel order
-    mbox[22] = 4;
-    mbox[23] = 4;
-    mbox[24] = 1;           //RGB, not BGR preferably
-
-    mbox[25] = 0x40001; //get framebuffer, gets alignment on request
-    mbox[26] = 8;
-    mbox[27] = 8;
-    mbox[28] = 4096;        //FrameBufferInfo.pointer
-    mbox[29] = 0;           //FrameBufferInfo.size
-
-    mbox[30] = 0x40008; //get pitch
-    mbox[31] = 4;
-    mbox[32] = 4;
-    mbox[33] = 0;           //FrameBufferInfo.pitch
-
-    mbox[34] = MBOX_TAG_LAST;
-
-    if(mbox_call(MBOX_CH_PROP) && mbox[20]==32 && mbox[28]!=0) {
-        mbox[28]&=0x3FFFFFFF;
-        fbwidth=mbox[5];
-        fbheight=mbox[6];
-        pitch=mbox[33];
-        lfb=(void*)((unsigned long)mbox[28]);
-    }
-}
-
-I will assume, for the sake of this posting, that the reader understands the mailbox architecture and the appropriate address definitions for them.  The key point is that allocating a virtual buffer twice the height of the physical buffer results in QEMU improperly displaying a double-height window.
\ No newline at end of file