diff options
Diffstat (limited to 'results/classifier/gemma3:12b/peripherals/1921635')
| -rw-r--r-- | results/classifier/gemma3:12b/peripherals/1921635 | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/results/classifier/gemma3:12b/peripherals/1921635 b/results/classifier/gemma3:12b/peripherals/1921635 new file mode 100644 index 00000000..081b4a05 --- /dev/null +++ b/results/classifier/gemma3:12b/peripherals/1921635 @@ -0,0 +1,35 @@ + +ESP SCSI adapter not working with DOS ASPI drivers + +I have been trying to install the DOS ASPI drivers for the ESP scsi card. Both in am53c974 and dc390 modes. Neither works but they don't work in different ways. + +The following things appear to be problematic: + +* The am53c974 should work with the PcSCSI drivers (AMSIDA.SYS) but the ASPI driver never manages to get past initializing the card. The VM never continues. +* The dc390 ASPI driver fares a little better. The ASPI driver loads and is semi-functional but the drivers for the peripherals don't work. + - ASPI.SYS (creative name) loads + - TRMDISK.SYS fails to load when a cd-drive is attached and will crashs scanning the scsi-id where the cd drive is attached + - TRMDISK.SYS loads without a CD drive attached but fails to read any scsi-hd devices attached. The TFDISK.EXE formatter crashes. + - TRMCD.SYS loads, but can not detect any CD drives. + +The various permutations: +am53c974 hang on ASPI driver load: (CD only attached) + +~/src/qemu/build/qemu-system-i386 -m 64 -device am53c974,id=scsi0 -device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga cirrus -fda am53c974_aspi.img -bios /home/hp/src/seabios/out/bios.bin -boot a -trace 'scsi*' -trace 'esp*' -D log + +dc390 crash because of CDROM attachment and loading TRMDISK.SYS (Only CD attached) +~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0,rombar=0 -device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga cirrus -fda dc390_all.img -bios /home/hp/src/seabios/out/bios.bin -boot a -trace 'scsi*' -trace 'esp*' -D log + +dc390 successful boot, but TRMDISK.SYS not working (TFDISK.EXE will crash) +~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0 -device scsi-hd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0,logical_block_size=512 -drive file=small.qcow2,if=none,id=drive0 -vga cirrus -fda dc390_all.img -bios /home/hp/src/seabios/out/bios.bin -boot a -trace 'scsi*' -trace 'esp*' -D log + +dc390 successful boot, TRMDISK.SYS not loaded, only TRMCD.SYS. CDROM not detected +~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0,rombar=0 -device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga cirrus -fda dc390_cd.img -bios /home/hp/src/seabios/out/bios.bin -boot a -trace 'scsi*' -trace 'esp*' -D log + +All of these tests were done on 7b9a3c9f94bcac23c534bc9f42a9e914b433b299 as well as the 'esp-next' branch found here: https://github.com/mcayland/qemu/tree/esp-next + +The bios file is a seabios master with all int13 support disabled. With it enabled even less works but I figured this would be a seabios bug and not a qemu one. + +The actual iso and qcow2 files used don't appear the matter. the 'small.qcow2' is an empty drive of 100MB. I have also tried other ISOs in the CD drives, or even not put any cd in the drives with the same results. + +I will attach all of the above images. \ No newline at end of file |