diff options
Diffstat (limited to 'results/classifier/no-thinking-deepseek-r1:70b/reasoning')
551 files changed, 2366 insertions, 0 deletions
diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 new file mode 100644 index 00000000..94a2298f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 @@ -0,0 +1,3 @@ +The issue relates to an assertion failure within QEMU's TCG (Tiny Code Generator) when handling a specific RISC-V instruction (vmv.v.x) under certain conditions. This involves the generation of vector operations and type duplication, which points directly to a problem with how instructions are being translated or handled. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 new file mode 100644 index 00000000..35e6084b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 @@ -0,0 +1,11 @@ +The bug report mentions "or1k tcg SIGILL". Here's how it fits into the categories: + +- **instruction**: The term "tcg" refers to Tiny Code Generator, which is related to instruction generation in QEMU. A SIGILL (Illegal Instruction) signal typically indicates that an invalid or undefined instruction was encountered. + +- **syscall**: There's no mention of system calls here, so this doesn't seem relevant. + +- **runtime**: While the error occurs at runtime, it's more specifically tied to an illegal instruction generated by TCG. + +Therefore, the most appropriate category is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 new file mode 100644 index 00000000..39b9cdb0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 @@ -0,0 +1,3 @@ +The issue describes a problem with the behavior of the ARM instruction "srs" in QEMU, where it incorrectly stores the CPSR instead of the SPSR. This directly relates to an error in how a specific instruction is implemented. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 new file mode 100644 index 00000000..fa029463 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 @@ -0,0 +1,5 @@ +The issue arises when running NumPy/SciPy test suites under QEMU emulation on ppc64le but not on aarch64. The failures indicate problems like array values being garbage, permuted, or fundamentally different (e.g., zero vs non-zero), which suggest issues in how floating-point operations are handled during emulation. + +These symptoms point to errors in the translation of instructions, particularly those involving floating-point arithmetic, rather than system calls or general runtime issues. Therefore, the category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 new file mode 100644 index 00000000..571f9d9e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 @@ -0,0 +1,3 @@ +The issue described involves incorrect code generation for SPARC32plus on 64-bit hosts, specifically with load and store operations. The problem arises from improper handling during the translation process in `translate.c`, leading to access violations. This is an example of a faulty instruction being generated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 new file mode 100644 index 00000000..818d5045 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 @@ -0,0 +1,3 @@ +The issue pertains to how QEMU handles addresses when using Address-Size overrides in Long Mode on x86-64 architecture. The problem arises from incorrect address calculations leading to General Protection Exceptions due to non-canonical memory addresses. This is related to instruction execution rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 new file mode 100644 index 00000000..a116d632 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 @@ -0,0 +1,5 @@ +The issue pertains to how the `spr_write_xer()` function handles setting specific flag bits in the `cpu_xer` variable within QEMU's PowerPC (PPC) target emulation. The problem arises because the function fails to set certain flags like `ca`, `ov`, `so`, etc., due to the use of a bitwise NOT operator (`~`) that excludes these bits from being copied. This discrepancy affects tools that rely on tracing CPU state, as they expect accurate reflection of all flag bits in `cpu_xer`. The proposed fix involves removing the `~` operator to include these flags correctly. + +This bug is classified under "instruction" because it relates to how a specific instruction (`mtxer`) is emulated and handled within QEMU's translation layer. The incorrect handling affects the state maintained by the emulator, which can lead to issues in debugging and analysis tools that depend on accurate CPU state information. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 new file mode 100644 index 00000000..622ae0d0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 @@ -0,0 +1,3 @@ +The bug report indicates an "illegal instruction" error (code 4), which suggests that the issue is related to executing an invalid CPU instruction. This typically points to problems in handling specific instructions within the emulator, making it an instruction-related issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 new file mode 100644 index 00000000..6c1466e4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 @@ -0,0 +1,3 @@ +The bug report discusses issues related to improper handling of flags on x86-64 architecture in QEMU, specifically involving ADX instructions and context switching. This relates directly to how specific CPU instructions are managed within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 new file mode 100644 index 00000000..4d6cd3bc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 @@ -0,0 +1,11 @@ +The user is asking whether the `feq.s` operation in RISC-V64 should only consider the lowest 32 bits and wants to classify this as part of a bug report within QEMU. The possible categories are "instruction," "syscall," or "runtime." + +First, I need to understand what `feq.s` does. In RISC-V, `feq.s` is a floating-point comparison instruction that checks if two single-precision floating-point numbers are equal. It operates on the F registers and sets a flag based on the comparison. + +The question suggests that there might be an issue with how QEMU handles this instruction, specifically whether it correctly processes only the lower 32 bits of the operands. If `feq.s` is not considering just the lower 32 bits when it should, this could lead to incorrect comparisons or errors in programs relying on this behavior. + +Since this bug relates to how a specific instruction (`feq.s`) is implemented or handled within QEMU, it falls under the category of an instruction-related issue rather than a system call error or a general runtime problem. + +Therefore, the appropriate classification for this bug report is "instruction." This helps in categorizing and addressing the issue more effectively within the QEMU development context. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 new file mode 100644 index 00000000..4fd10eb1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 @@ -0,0 +1,7 @@ +The bug report indicates a SIGSEGV (Segmentation Fault) occurring in the `static_code_gen_buffer` function while running QEMU to emulate a SunOS 5.8 box on RHEL 6.4 Linux. The stack trace points to functions related to CPU execution and translation blocks, which are integral parts of QEMU's instruction emulation process. + +The error occurs during runtime when executing instructions, specifically within the `cpu_tb_exec` function, which is responsible for executing translated basic blocks (TBB) of guest code. This suggests that the issue lies in how QEMU generates or executes these translated instructions. + +Given this context, the bug falls under the category of an **instruction** error, as it relates to the emulation of guest instructions and the generation of machine code during runtime. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 new file mode 100644 index 00000000..a0e452ff --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 @@ -0,0 +1,5 @@ +The issue here involves how floating-point operations are being handled differently when running under QEMU's user mode versus a fully emulated environment. The problem arises specifically with division operations involving floating-point numbers. This suggests that there might be an issue in how QEMU emulates certain instructions related to floating-point arithmetic. + +Given that the same binary behaves correctly in a fully emulated environment but produces incorrect results in user mode, it points towards a problem in the emulation of specific instructions rather than system calls or general runtime issues. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 new file mode 100644 index 00000000..542935a8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 @@ -0,0 +1,3 @@ +The issue described pertains to a specific problem with how QEMU emulates certain SSE4.1 instructions, particularly `pmovzxbw`. This instruction is supposed to zero-extend bytes to words within vectors but is incorrectly implemented, leading to incorrect output when run under QEMU compared to real hardware. The bug report focuses on the emulation of this instruction, which falls directly into the category of an instruction-level issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 new file mode 100644 index 00000000..5892bc5d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 @@ -0,0 +1,3 @@ +The bug report indicates that running rjsupplicant under QEMU results in a segmentation fault. The stack trace points to an issue in `static_code_gen_buffer()`, which is related to instruction generation within QEMU's CPU emulation. This suggests a problem with how instructions are being handled or generated, rather than a system call error or other runtime issues. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 new file mode 100644 index 00000000..5b14c8af --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 @@ -0,0 +1,3 @@ +The bug report discusses issues with certain wide-string functions in glibc when using QEMU user emulation for s390x architecture. These functions are implemented in optimized assembler and might be behaving incorrectly due to faulty instructions or incorrect handling of specific CPU instructions. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 new file mode 100644 index 00000000..aec57248 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 @@ -0,0 +1,3 @@ +The bug report describes an issue where running a 64-bit binary compiled for Octeon using QEMU results in an "Illegal instruction" error. This indicates a problem with the execution of specific instructions that QEMU does not handle correctly. The user also mentions having a patch related to this, which further points to an issue with instruction emulation. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 new file mode 100644 index 00000000..778efeb7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 @@ -0,0 +1,3 @@ +The bug report mentions an "illegal instruction" error during execution, specifically `ebc0` at address `f67e5662`. This indicates that the CPU encountered an opcode it couldn't recognize or execute, which falls under issues related to instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 new file mode 100644 index 00000000..17d02c47 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 @@ -0,0 +1,3 @@ +The issue arises from an attempt to execute a binary using `qemu-i386`, leading to a segmentation fault. The backtraces show that the crash occurs during memory access operations (like `cpu_ldub_code`), which are related to instruction execution and translation in QEMU's TCG (Tiny Code Generator). There is no mention of system calls or runtime-specific issues, so it points towards an error in handling instructions. + +**Category: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 new file mode 100644 index 00000000..b38a8651 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 @@ -0,0 +1,3 @@ +The issue describes a problem with how QEMU handles the XOR instruction, specifically regarding the parity flag not being set correctly when `xor %eax,%eax` is used. This points to a fault within the emulator's handling of that specific instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 new file mode 100644 index 00000000..92fd6f9c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 @@ -0,0 +1,3 @@ +The bug report describes issues with QEMU incorrectly recognizing specific PowerPC Altivec rounding instructions (vrfim, vrfin, vrfiz). These are instructions within the instruction set architecture, so the appropriate category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 new file mode 100644 index 00000000..1cc8ddb3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 @@ -0,0 +1,3 @@ +The bug report discusses an "Illegal instruction" error when running code compiled with certain ARMv8 intrinsics. These intrinsics are translated into specific ARM instructions that QEMU doesn't support. This falls under issues related to instructions not being handled correctly. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 new file mode 100644 index 00000000..2535854a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect handling of the `blr x30` instruction within QEMU's implementation. The problem is specific to how the emulator processes this particular machine-level instruction, leading to unexpected behavior when using the x30 register as an operand with `blr`. Since this pertains directly to how instructions are executed, it falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 new file mode 100644 index 00000000..da1b7e1b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 @@ -0,0 +1,7 @@ +The given bug report involves an assertion failure during the execution of specific RISC-V instructions within QEMU. The error message points to a problem in `decode_save_opc`, specifically when `ctx->insn_start` is null. This indicates an issue with how QEMU decodes or handles certain opcodes. + +Since this relates to instruction decoding and not system calls or general runtime errors, the appropriate category is: + +**instruction** + +Answer: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 new file mode 100644 index 00000000..c9c7c526 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 @@ -0,0 +1,3 @@ +The issue described involves a segmentation fault when running a MIPS64 executable under QEMU. This typically occurs due to an invalid memory access or dereference, which is generally related to instructions or operations being executed. Therefore, it falls under the category of an instruction-related error. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 new file mode 100644 index 00000000..6680e160 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 @@ -0,0 +1,3 @@ +The issue involves an unexpected change in the value of the RAX register after executing specific assembly instructions. The problem seems to stem from how the instructions are being handled, possibly due to incorrect encoding or decoding of the instruction, leading to an unintended modification of RAX. This points towards a fault in the instruction itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 new file mode 100644 index 00000000..b99b408f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 @@ -0,0 +1,3 @@ +The issue is related to an incorrect implementation of the `blsmsk` instruction in QEMU, leading to a different carry flag (CF) value compared to real CPU behavior. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 new file mode 100644 index 00000000..371a51d0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 @@ -0,0 +1,3 @@ +The bug report describes an issue with the BEXTR instruction in QEMU not producing the correct result compared to the CPU. This indicates a problem with how the instruction is implemented or handled within QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 new file mode 100644 index 00000000..a1e5e5c4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 @@ -0,0 +1,3 @@ +The bug report discusses an issue with specific x86 instructions (ADOX and ADCX) where their behavior differs from the CPU's expected results, particularly regarding the EFLAGS register. This indicates a problem with how these instructions are emulated in QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 new file mode 100644 index 00000000..48667a8e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 @@ -0,0 +1,3 @@ +The issue described revolves around the behavior of specific x86 instructions (LSL and LAR) within QEMU, where these instructions cause a crash despite functioning correctly on physical hardware. This points to a problem with how QEMU emulates these particular instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 new file mode 100644 index 00000000..923a6dd7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 @@ -0,0 +1,3 @@ +The issue arises from an x86 instruction (CVTSD2SS) causing QEMU to crash when accessing memory near page boundaries. This is related to how QEMU handles specific instructions that may lead to invalid memory accesses if not properly managed. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 new file mode 100644 index 00000000..1df14843 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 @@ -0,0 +1,21 @@ +The provided bug report mentions an "Illegal instruction" error and includes details about CPU registers and program counters, which are directly related to instruction execution. This indicates that the issue is likely due to a faulty or unsupported instruction being executed by QEMU when running m68k binaries. + +**Step-by-step explanation:** + +1. **Identify the Error Type:** + - The error message `qemu: fatal: Illegal instruction` suggests that QEMU encountered an instruction it couldn't execute properly. + - This is a common indicator of an issue related to instruction emulation or decoding within QEMU. + +2. **Analyze the Context:** + - The user is using QEMU to emulate m68k binaries on a different architecture, which involves binary translation and instruction emulation. + - Problems like this often arise from unimplemented instructions, incorrect instruction handling, or bugs in the emulator's instruction decoding logic. + +3. **Exclude Other Categories:** + - **Syscall:** The error does not mention any specific system call failing, nor does it show a syscall-related issue in the strace output. + - **Runtime:** While this is a runtime error, the specific nature of the error points more directly to an instruction-level problem rather than a general runtime issue. + +4. **Conclusion:** + - The combination of an illegal instruction error and the context of cross-architecture emulation strongly suggests that this is an instruction-related bug within QEMU's m68k emulation. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 new file mode 100644 index 00000000..966bead6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 @@ -0,0 +1,3 @@ +The bug report describes a segmentation fault caused by a null pointer dereference when executing specific SVE instructions under certain conditions in QEMU. This issue is related to an error in handling these instructions during runtime, specifically within the `sve_probe_page` function. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 new file mode 100644 index 00000000..09d0ae2a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 @@ -0,0 +1,5 @@ +The bug report discusses an incorrect implementation of the SYSRET instruction in QEMU's helper function for system calls. The issue specifically relates to how the stack selector (%ss) is loaded from the IA32_STAR model-specific register without correctly setting the privilege level bits (OR-ing with 3). This affects the behavior when returning to user mode, leading to a general protection fault upon interrupt handling. + +Given that the problem pertains to an error in implementing a specific CPU instruction (SYSRET), it falls under the "instruction" category. The report details how the faulty implementation leads to incorrect privilege levels in the stack segment selector and the resulting system instability, which aligns with issues related to instruction-level behavior rather than system calls or general runtime errors. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 new file mode 100644 index 00000000..05431e82 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 @@ -0,0 +1,3 @@ +The issue arises from an assertion failure when executing a specific RISC-V vector instruction (`vfncvt.rtz.x.f.w`), leading to a crash in QEMU. The problem is tied to how this particular instruction is being handled within QEMU's translation process. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 new file mode 100644 index 00000000..168d8a9e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 @@ -0,0 +1,27 @@ +The issue arises from an SSL/TLS handshake failure when using QEMU's x86_64 emulator to run an AMD64 version of curl on an AArch64 host system. This suggests a problem related to how QEMU handles certain CPU instructions or cryptographic operations, potentially involving incorrect emulation of specific instructions used in SSL processing. + +**Step-by-Step Explanation:** + +1. **Identify the Problem Context:** The user reports that after commit `16fc5726a6`, running an AMD64 version of curl under QEMU's x86_64 emulator on an AArch64 host results in an SSL error, specifically `curl: (35) error:1416D07B:SSL routines:tls_process_key_exchange:bad signature`. This indicates a failure during the TLS key exchange process. + +2. **Analyze the Error Message:** The error message points to an issue in SSL/TLS processing—specifically, a "bad signature" during the key exchange phase. This is often related to cryptographic operations such as RSA or ECDSA signature verification or generation. + +3. **Consider Possible Causes:** + - **Instruction Emulation Issue:** QEMU might be incorrectly emulating certain x86_64 instructions that are used by curl for SSL/TLS processing. + - **System Call Handling:** Problems in how QEMU handles system calls related to cryptographic operations could lead to such errors. + - **Runtime Environment Misconfiguration:** Incorrect handling of CPU features or misconfiguration in the runtime environment could affect cryptographic functions. + +4. **Evaluate the Given Options:** + - **Instruction:** If QEMU is not correctly emulating specific x86_64 instructions used by curl's SSL/TLS library (e.g., for RSA, ECDSA, etc.), this would cause the observed failure. + - **Syscall:** Issues with system call translation (e.g., incorrect handling of cryptographic syscalls) could also lead to SSL errors. + - **Runtime:** General runtime issues might include memory corruption or incorrect state management affecting SSL operations. + +5. **Determine the Most Likely Category:** + - The error is tied to cryptographic processing, which heavily relies on specific CPU instructions for performance and correctness. A faulty instruction emulation in QEMU would directly impact these operations. + - While syscalls are also a possibility, modern TLS implementations often rely more on library functions optimized with specific instructions rather than kernel syscalls. + - Runtime issues could be broader but are less likely to manifest as a specific SSL error tied to a particular commit. + +6. **Conclusion:** The most plausible category is "instruction," as the failure likely stems from incorrect emulation of x86_64 instructions used in SSL/TLS processing by curl when run under QEMU's x86_64 emulator on an AArch64 host. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 new file mode 100644 index 00000000..b797ad2a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 @@ -0,0 +1,3 @@ +The bug report indicates that there's a segmentation fault (SIGSEGV) occurring during the execution of a program under QEMU emulation. This suggests an issue with accessing memory improperly or attempting to execute an invalid instruction, which points to a problem at the instruction level. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 new file mode 100644 index 00000000..c7fd1965 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 @@ -0,0 +1,3 @@ +The issue involves test programs failing when using specific vector extract instructions (vextractbm, vextracthm, vextractwm, or vextractdm) on qemu-ppc64 but not on qemu-ppc64le. This points to a problem with how QEMU emulates these particular PowerPC instructions. + +**Category: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 new file mode 100644 index 00000000..47307e24 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 @@ -0,0 +1,5 @@ +The bug report describes an issue with the placement of `G_NORETURN` in the code when using clang++ 15.0.7. The problem arises during compilation, specifically related to how attributes are used in the code. This is a compile-time error rather than a runtime error or an issue with instructions or syscalls. + +The error message indicates that the attribute list (from `G_NORETURN`, which expands to `[[noreturn]]`) cannot appear where it was placed. The compiler does not accept the syntax as written, leading to a build failure. This is strictly a compile-time issue and does not involve runtime behavior or system calls. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 new file mode 100644 index 00000000..075c404f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 @@ -0,0 +1,3 @@ +The issue arises from an implicit declaration of `qemu_close_to_socket`, indicating a problem with function declarations or usage in the source code, which is part of the build process rather than runtime execution. Therefore, it falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 new file mode 100644 index 00000000..3d62a865 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 @@ -0,0 +1,3 @@ +The bug report discusses an issue where QEMU incorrectly allows and executes v8-only instructions (like `vrintz`) on non-v8 CPUs, such as Cortex-A9. This is a problem related to how specific ARM instructions are handled by the emulator. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 new file mode 100644 index 00000000..d249a23d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the PEXT instruction in QEMU's emulation, where it returns incorrect values and appears to swap arguments. This points to a problem with how the instruction is handled within QEMU itself, rather than issues related to system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 new file mode 100644 index 00000000..7d976ab3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 @@ -0,0 +1,3 @@ +The issue involves a fence.i instruction not functioning as expected, leading to incorrect behavior during code execution. This relates directly to an instruction-level problem within the RISC-V implementation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 new file mode 100644 index 00000000..9a30aeab --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 @@ -0,0 +1,3 @@ +The bug report discusses issues related to specific instructions (scalar single-precision floating-point) and their handling within QEMU's PowerPC emulation. It highlights incorrect tests for the MSR[SPV] bit in certain instruction definitions and suggests modifications to fix these issues. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 new file mode 100644 index 00000000..5d918b95 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 @@ -0,0 +1,3 @@ +The issue revolves around incorrect behavior of specific SVE instructions (ldff1d) when certain conditions are met, leading to data corruption. This falls under a problem with how an instruction is implemented or handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 new file mode 100644 index 00000000..f43c7eae --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 @@ -0,0 +1,3 @@ +The bug report discusses an issue where certain return instructions (ret, lret, iret) in QEMU handle noncanonical IP addresses incorrectly compared to native CPU behavior. This directly relates to how specific instructions are emulated within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 new file mode 100644 index 00000000..84c36df9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 @@ -0,0 +1,3 @@ +The issue lies in how the outer product instruction handles elements across different tiles, specifically tile 1 in this case. The incorrect result suggests a problem with the `fmopa` instruction's implementation when using higher-numbered tiles, which points to a fault in the instruction itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 new file mode 100644 index 00000000..211aa944 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 @@ -0,0 +1,3 @@ +The issue involves a crash when executing `ucomiss` instructions while emulating an x86-64 CPU on an AArch64 host within QEMU. This directly relates to a problem with handling specific instructions during emulation. + +(instruction) \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 new file mode 100644 index 00000000..be406c69 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 @@ -0,0 +1,5 @@ +The issue arises because QEMU does not support certain x86-64 instructions that are being used in the compiled binary. These instructions are valid and execute correctly on real hardware but cause an illegal instruction error when run under QEMU. This indicates a problem with how QEMU emulates or handles specific CPU instructions. + +The bug is classified as: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 new file mode 100644 index 00000000..9a487280 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 @@ -0,0 +1,4 @@ +The bug report describes an issue where QEMU crashes when emulating an STXP instruction on a Windows host. The problem is traced back to a specific change involving `helper_atomic_cmpxchgo_le` and I128 arguments, leading to a segmentation fault during runtime. + +**Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 new file mode 100644 index 00000000..f1b2c0fb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 @@ -0,0 +1,3 @@ +The bug report describes issues related to incorrect behavior during the execution of specific instructions on an SH4 processor when using QEMU. The problems manifest as uncaught signals and abnormal exits during various floating-point operations, which points to issues in how instructions are being handled rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 new file mode 100644 index 00000000..51110025 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 @@ -0,0 +1,5 @@ +The issue arises from an illegal `exts` instruction encountered while running a MIPS N32 executable under QEMU. The problem is traced back to the dynamic linker (`ld.so.1`), where the `exts` instruction causes an exception. This indicates that either the instruction is not correctly handled by QEMU's emulator for the MIPS N32 architecture or there is an incompatibility in the instruction set implementation. + +**Category: instruction** + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 new file mode 100644 index 00000000..ac8cc2b8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 @@ -0,0 +1,7 @@ +The issue described involves an unexpected behavior change between different versions of QEMU when running specific test cases related to atomic operations. The problem manifests as an application crash (aborted) and a core dump, indicating a possible issue in how instructions are handled by the emulator. + +Given that the user provided details about differences in assembly-level instructions during execution and mentioned problems with atomic operations, this points towards a potential fault in instruction emulation within QEMU. + +Therefore, the appropriate category for this bug report is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 new file mode 100644 index 00000000..1d50ceb0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 @@ -0,0 +1,17 @@ +The issue described involves QEMU stalling when running a specific test under different versions, particularly starting from 2.8. The problem occurs during execution and relates to an instruction (`add r4, pc, r4`) where the program hangs. + +Step-by-step explanation: + +1. **Understanding the Problem**: The user reports that GCC sanitizer tests time out when run using QEMU-arm starting from version 2.8, whereas they worked with version 2.7. + +2. **Reproduction Steps**: They provided a test case and libraries to reproduce the issue, which involves running `qemu-arm` with specific options. + +3. **Debugging Information**: The `-d in_asm` option shows that the program stalls at an `add` instruction: `0x40b6eb44: e08f4004 add r4, pc, r4`. + +4. **Analyzing the Stall**: The stall suggests that QEMU is not correctly emulating this particular ARM instruction or handling it in a way that causes an infinite loop or indefinite pause. + +5. **Classification**: The issue revolves around a specific CPU instruction causing QEMU to hang, which falls under "instruction" errors in the context of QEMU's bug categorization. + +Based on this analysis, the appropriate category for the bug is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 new file mode 100644 index 00000000..ee4c79b2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 @@ -0,0 +1,3 @@ +The bug report describes an issue with the `ssra` instruction in QEMU when using vector lengths of 1024-bit or higher. The incorrect results for signed integers suggest that there's a problem with how the SVE2 instruction is emulated. This falls under issues related to specific instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 new file mode 100644 index 00000000..368bd96d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 @@ -0,0 +1,3 @@ +The issue revolves around how QEMU handles a specific assembly instruction sequence involving a far call using `call fword ptr [esp]`. This is not related to system calls or general runtime errors but is specifically tied to the execution and emulation of instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 new file mode 100644 index 00000000..ce840f81 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 @@ -0,0 +1,3 @@ +The issue revolves around incorrect decoding of BMI instructions in TCG, specifically related to the `shlx` instruction, leading to an invalid opcode exception. This problem doesn't occur under KVM, indicating it's specific to QEMU's TCG implementation. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 new file mode 100644 index 00000000..e76f51b0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 @@ -0,0 +1,16 @@ +The correct classification for this bug report is **instruction**, as it involves an issue with the specific assembly instruction `xgetbv` that the compiler cannot recognize. The error message explicitly mentions "no such instruction" and discusses how to work around it by using the encoded form of the instruction. + +Step-by-Step Explanation: + +1. **Identify the Error**: The error message is `tcg-target.inc.c:3495:no such instruction: 'xgetbv'`. This clearly indicates that the assembler or compiler does not recognize the `xgetbv` instruction. + +2. **Understand the Context**: The problem occurs while building QEMU on Mac OS 10.6.8 using GCC 5.2.0. Another project (asmjit) faced a similar issue and resolved it by replacing the instruction name with its encoded byte sequence, which suggests that this is an assembler/compiler support issue. + +3. **Analyze Possible Categories**: + - **instruction**: Directly related to the use of a specific assembly instruction (`xgetbv`) that the compiler does not recognize. + - **syscall**: Not applicable here since the error is about an instruction, not a system call. + - **runtime**: While this could be considered a runtime issue because it affects the build process, the root cause is specifically related to the instruction. + +4. **Conclusion**: The primary issue revolves around the faulty or unrecognized assembly instruction `xgetbv`, making **instruction** the most appropriate category for this bug report. + +Final Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 new file mode 100644 index 00000000..bc80afef --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 @@ -0,0 +1,5 @@ +The issue describes a problem related to the handling of the 'bkpt' instruction within QEMU when using ARMv7 LPAE. Specifically, it points out that during a prefetch abort exception caused by a 'bkpt' instruction in user space, the IFSR register's bit [9] (which is supposed to indicate long-descriptor format usage) isn't set correctly. This affects how exceptions are processed and reported, leading to incorrect output when debugging or handling such exceptions. + +This bug is tied directly to an issue with a specific CPU instruction ('bkpt') and its interaction with the ARM architecture's exception handling mechanisms. It doesn't relate to system calls (syscall) nor general runtime errors but rather to how a particular instruction behaves under certain conditions in the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 new file mode 100644 index 00000000..88c15309 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 @@ -0,0 +1,3 @@ +The issue revolves around an incorrect conversion from floating-point numbers to integers using Neon instructions in QEMU, specifically related to rounding behavior. This points to a problem with how a particular instruction is being emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 new file mode 100644 index 00000000..c1b1dfee --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 @@ -0,0 +1,5 @@ +The problem arises because QEMU's SPARC user-mode emulation does not correctly handle the CASA (Conditional Arithmetic Store on Atomic) instruction. This specific instruction is supported by certain CPUs like LEON3 but isn't being properly implemented in the emulator. The issue is tied to the lack of handling for ASI (Address Space Identifier) load/store operations, which are necessary for implementing CASA. + +**Category: instruction** + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 new file mode 100644 index 00000000..ddd79452 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 @@ -0,0 +1,3 @@ +The issue involves incorrect behavior related to PowerPC AltiVec vector operations not flushing source subnormal values to zero as specified, leading to unexpected results in computations. This pertains to how instructions handle floating-point operations, specifically within the AltiVec instruction set. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 new file mode 100644 index 00000000..8b1e49ff --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 @@ -0,0 +1,7 @@ +The issue described involves running x86_64 binaries on an aarch64 platform using QEMU's user-mode emulation. The key problem is the "Synchronous External Abort" error, which typically occurs due to invalid memory accesses or incorrect instruction execution. + +This error is related to how QEMU handles instructions during emulation, particularly when translating x86_64 instructions for the aarch64 architecture. It suggests that there might be a bug in the way certain instructions are being emulated or translated. + +The category of this bug falls under "instruction" because it pertains to issues with executing or translating specific instructions, leading to an abort. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 new file mode 100644 index 00000000..e0166727 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 @@ -0,0 +1,3 @@ +The issue involves an illegal instruction signal when using a specific PowerPC instruction (`vec_subs` instead of `vec_sub`) while testing under QEMU. This points to a problem with how instructions are handled or translated by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 new file mode 100644 index 00000000..f17b9816 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 @@ -0,0 +1,3 @@ +The bug report describes an issue involving a 16-byte write instruction (`movdqu`) that causes a partial write at a page boundary when a page fault occurs. This indicates a problem with how the instruction is handled, specifically in TCG mode within QEMU. The incorrect behavior points to a flaw in the implementation of the `movdqu` instruction itself rather than a syscall error or general runtime issue. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 new file mode 100644 index 00000000..0b98c4fe --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 @@ -0,0 +1,3 @@ +The issue pertains to a problem with an instruction (STGP) not functioning as expected within QEMU's codebase. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 new file mode 100644 index 00000000..4aed4f63 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 @@ -0,0 +1,3 @@ +The issue described involves incorrect behavior of floating-point operations when emulating AArch64 on QEMU compared to real hardware. The problem specifically occurs with the `fdiv` instruction when FPCR is set to zero. This points to a flaw in how QEMU handles the emulation of the `fdiv` instruction, which falls under the category of an instruction-level issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 new file mode 100644 index 00000000..466ca4bd --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 @@ -0,0 +1,3 @@ +The issue arises due to an error within the target/sh4 code when handling FPSCR.PR checks, leading to a crash during runtime. This is related to specific instructions causing undefined operations. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 new file mode 100644 index 00000000..82799a38 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 @@ -0,0 +1,3 @@ +The issue revolves around an ARM conditional branch after an if-then instruction causing QEMU to hang during debugging, specifically when using Thumb2 instructions. This points to a problem with how certain instructions are handled, particularly in the context of conditional execution and instruction translation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 new file mode 100644 index 00000000..cf48dd3f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 @@ -0,0 +1,3 @@ +The issue involves a path traversal vulnerability where the TFTP server's file access checks are insufficient on Windows due to differences in directory separators (backslashes instead of slashes). This allows an attacker to read arbitrary files by bypassing the intended restrictions. + +Classification: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 new file mode 100644 index 00000000..99c9d417 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 @@ -0,0 +1,3 @@ +The issue arises from executing an invalid address, leading to a segmentation fault. This relates to how QEMU handles instructions during emulation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 new file mode 100644 index 00000000..b270f27c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 @@ -0,0 +1,3 @@ +The issue arises because QEMU's TCG (Tiny Code Generator) does not support certain AVX instructions that are being used by the code built with -march=skylake and -mavx2 flags. The warnings indicate missing support for various CPU features, including AVX and AVX2, which are required to execute the AVX instructions correctly. As a result, when the program attempts to run these unsupported instructions, it hangs indefinitely. This problem is related to the execution of specific instructions that QEMU's TCG cannot handle. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 new file mode 100644 index 00000000..08c6a6a4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 @@ -0,0 +1,3 @@ +The bug report describes illegal instructions causing crashes in QEMU 4.0.0-rc0 when running ARM binaries that worked correctly in version 3.1.0. This indicates issues with instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 new file mode 100644 index 00000000..545971a9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 @@ -0,0 +1,7 @@ +The issue appears to be related to how QEMU's PowerPC (ppc) emulator handles floating-point arithmetic or conversions, particularly when translating between `uint32_t` and `float32`. The discrepancy in the output between running the program natively on a PowerPC system versus through QEMU suggests that there might be an error in how the FPU instructions are being emulated. Specifically, the `0x1` value is being interpreted differently, which could point to a problem with instruction emulation rather than a systemic runtime issue or a syscall error. + +The fact that the same binary produces different results when run through QEMU indicates that the emulator's handling of floating-point operations or data types isn't correctly mirroring native execution. This could involve incorrect bit-level translations or mishandling of specific FPU instructions used in the conversion from integer to float. + +Given this, the most appropriate category for the bug is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 new file mode 100644 index 00000000..3dec7cd3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 @@ -0,0 +1,3 @@ +The issue arises from incorrect handling of NaN values when converting from `float` to `double`, specifically within QEMU's PowerPC emulation. This is an instruction-level problem because it pertains to how specific instructions (like floating-point conversions) are emulated incorrectly. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 new file mode 100644 index 00000000..8e397824 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 @@ -0,0 +1,3 @@ +The issue is related to an instruction (tlbivax) not functioning correctly for addresses above 4G due to a truncation problem in QEMU's implementation. This falls under the "instruction" category as it involves a specific faulty instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 new file mode 100644 index 00000000..01fc2705 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 @@ -0,0 +1,3 @@ +The given bug report describes an issue where the disassembler and translator disagree on decoding a specific RISC-V instruction. This indicates a problem related to instruction handling rather than system calls or general runtime issues. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 new file mode 100644 index 00000000..e538326d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 @@ -0,0 +1,3 @@ +The issue is related to incorrect translation of specific instructions (LAHF and SAHF) when used with the REX prefix in QEMU. This falls under the category of an **instruction** bug because it involves how particular machine-level instructions are handled by the emulator. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 new file mode 100644 index 00000000..1d092829 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 @@ -0,0 +1,25 @@ +The bug report discusses an issue related to SSE comparison operations using an 8-bit immediate value and how QEMU handles it incorrectly by throwing a SIGILL when the immediate is oversized. The problem lies within the implementation of specific instructions in QEMU, which affects how these operations are executed. + +**Step-by-Step Explanation:** + +1. **Understanding the Bug:** The report mentions that SSE CMP ops using an 8-bit immediate cause a SIGILL (illegal instruction) signal when the immediate value is too large. This indicates a problem with how the emulator processes certain instructions. + +2. **Nature of the Issue:** The issue is tied to specific CPU instructions and their encoding, not system calls or general runtime errors. It’s about how QEMU interprets and executes these particular SSE instructions. + +3. **Classification Categories:** + - **Instruction:** This category involves bugs in how specific CPU instructions are emulated. + - **Syscall:** Issues related to system calls would be classified here, but the bug isn’t about syscalls. + - **Runtime:** General runtime errors that don’t fit into the other categories. + +4. **Conclusion:** Since the problem revolves around incorrect handling of specific SSE instructions and their operands within QEMU's emulation layer, it falls under the "instruction" category. + +**Answer: instruction** + +The classification is determined by the fact that the bug pertains to how specific CPU instructions are processed in QEMU, making "instruction" the appropriate category. + +```plaintext +instruction +``` + +**Final Answer** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 new file mode 100644 index 00000000..a54fdb94 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 @@ -0,0 +1,7 @@ +The issue revolves around the `denbcdq` instruction not behaving as expected. This instruction is specific to the PowerPC architecture and is related to handling decimal floating-point numbers. The problem manifests differently when run natively versus under QEMU emulation, indicating a potential bug in how QEMU emulates this particular instruction. + +The user's analysis suggests that the issue might be tied to endianness or the way data is handled with implicit floating-point register pairs, pointing towards problems in the helper function `helper_denbcdq` within the QEMU codebase. This indicates that the problem lies within the emulation of a specific CPU instruction rather than a system call or general runtime error. + +Based on this analysis, the bug falls under the category of an instruction misbehaving. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 new file mode 100644 index 00000000..b312de77 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 @@ -0,0 +1,3 @@ +The issue reported pertains to how QEMU handles segment prefixes in 64-bit mode, specifically that certain prefixes are not being ignored as they should be according to x86_64 specifications. This relates directly to the behavior and implementation of instructions within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 new file mode 100644 index 00000000..c5e650f5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 @@ -0,0 +1,3 @@ +The bug is due to incorrect handling of buffer pointers, potentially leading to an out-of-bounds access during runtime execution. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 new file mode 100644 index 00000000..57f3fc36 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 @@ -0,0 +1,7 @@ +The issue revolves around the behavior of ARM v8.3 pauth instructions (specifically `paciasp` and `autiasp`) within QEMU, where these instructions are not functioning as expected when tested on an Ubuntu 19.10 x86_64 machine using a specific version of QEMU. The problem seems to be related to how QEMU handles the computation and verification of Pointer Authentication Codes (PACs), particularly concerning truncation issues that affect the authentication process. + +The user has provided detailed test scenarios, including specific values for LR before and after corruption, as well as PAC outputs with corresponding `bot_bit` and `top_bit` results. These details suggest that there is an error in how QEMU's implementation of these instructions handles certain edge cases or truncation scenarios, leading to incorrect authentication success when it should fail. + +Given this context, the issue clearly points to a problem within the implementation of the ARM v8.3 pauth instructions themselves within QEMU. The focus is on instruction-level functionality rather than system calls or general runtime errors. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 new file mode 100644 index 00000000..abda2bb5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 @@ -0,0 +1,7 @@ +The issue arises when running a MIPS binary compiled for big-endian 32-bit architecture using QEMU, resulting in a segmentation fault. The problem doesn't occur with 64-bit or little-endian 32-bit MIPS, which suggests it's specific to the way QEMU handles certain instructions in the big-endian 32-bit environment. + +The bug is likely due to an incorrect implementation of an instruction within QEMU that causes the program to access memory improperly, leading to a segmentation fault. This points towards a problem with how QEMU emulates specific machine instructions for this particular architecture. + +Thus, the appropriate category for this bug report would be: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 new file mode 100644 index 00000000..888859a4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the implementation of the VMOVDQU AVX instruction for YMM registers in QEMU. The problem lies in how the `gen_ldo_env_A0` function handles data transfer, incorrectly limiting it to 16 bytes instead of 32 when using YMM registers. This is a flaw in the translation and generation of instructions within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 new file mode 100644 index 00000000..198af3f5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 @@ -0,0 +1,3 @@ +The bug report describes an issue with the EXT instruction specifically related to how it handles V registers on AArch64 CPUs with SVE support. The problem lies within the instruction's operation, where certain bits are not being cleared as expected. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 new file mode 100644 index 00000000..5cb69857 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 @@ -0,0 +1,3 @@ +The issue involves how QEMU's ARM Linux-user mode handles the BKPT instruction, which isn't generating the expected SIGTRAP signal. This is traced back to incorrect handling of exceptions where BKPT is treated similarly to SWI (system calls), leading to improper execution paths. + +Category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 new file mode 100644 index 00000000..4a33acde --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 @@ -0,0 +1,15 @@ +The issue involves certain programs causing QEMU to crash due to a "tcg fatal error" and an assertion failure related to `have_mmap_lock()`. The provided code snippet and additional examples execute custom bytecode that seems to trigger this behavior in both QEMU 4.2.0 and 5.0.0-rc4 versions when run using either the -user or -system variants. + +Analyzing the error message: +1. **tcg fatal error**: This indicates a problem within QEMU's Tiny Code Generator (TCG), which is responsible for translating guest machine code into host code. +2. **cpu_exec(CPUState *) assertion failure**: The assertion `!have_mmap_lock()` failing suggests an issue with how memory mappings or locks are handled during execution. + +The code snippets provided contain various x86-64 instructions, including some that involve SIMD operations (like `vpmovzxbd`, `vroundps`, etc.), which might be interacting incorrectly with QEMU's TCG. + +Given that the crash occurs when executing specific machine code instructions and is reproducible across different versions of QEMU, it points to a problem in how certain instructions are being handled or translated by the TCG. This suggests the issue lies within the instruction translation or execution logic rather than syscalls or general runtime errors. + +**Category: instruction** + +The bug appears to be related to faulty or incorrectly handled instructions within QEMU's TCG translator, leading to fatal errors during execution. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 new file mode 100644 index 00000000..8a5e2d12 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 @@ -0,0 +1,7 @@ +The bug report discusses an issue where a SIGILL signal is generated due to an invalid shift instruction (RLDICL) being produced by QEMU's translation process when constant folding is enabled for subtraction operations during the emulation of PPC64LE instructions on x86_64 architecture. + +**Category: instruction** + +This categorization fits because the problem arises from an invalid or incorrectly generated machine-level instruction, specifically related to a shift operation. The bug report details how the faulty instruction causes a crash and ties it directly to QEMU's handling of constant folding during translation, which is part of the instruction processing logic. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 new file mode 100644 index 00000000..ff005d5f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 @@ -0,0 +1,3 @@ +The issue describes that the binary behaves differently on QEMU compared to actual PPC64LE hardware without any illegal instruction errors, indicating a problem in how instructions are handled by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 new file mode 100644 index 00000000..197489ed --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 @@ -0,0 +1,5 @@ +The issue reported pertains to the RISC-V dynamic rounding mode not updating correctly when the `frm` value changes while `rm=7`. The code in QEMU's `gen_set_rm` function checks if `ctx->frm == rm` before updating, which prevents the rounding mode from changing even when `frm` is modified. This behavior contradicts the RISC-V specification, leading to incorrect rounding during floating-point operations. + +The problem occurs at runtime when executing instructions, making it a **runtime** issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 new file mode 100644 index 00000000..2409ffa9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 @@ -0,0 +1,10 @@ +The user's question involves a potential bug in QEMU related to the `BICS` instruction not setting flags correctly. The analysis provided points out that this is an issue with how the instruction is handled in the code, specifically within the translation logic for AArch64 instructions. + +To classify the bug: +1. **Instruction**: This category fits because the issue pertains directly to how a specific CPU instruction (`BICS`) behaves incorrectly. +2. **Syscall**: This doesn't apply since the problem isn't related to system calls. +3. **Runtime**: While runtime issues are possible, this particular case is more about incorrect instruction implementation. + +The appropriate classification is clearly "instruction". + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 new file mode 100644 index 00000000..1581aeff --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 @@ -0,0 +1,5 @@ +The issue arises from compilation errors related to C11 atomic operations in the `util/async.c` file when using clang. Specifically, the compiler complains that the address arguments for atomic operations are not pointers to `_Atomic` types, which is a requirement for C11 atomics. + +This problem is related to incorrect usage of atomic operations and thus falls under **instruction** errors because it pertains to how the code is written and compiled rather than runtime behavior or system calls. + +Instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 new file mode 100644 index 00000000..552b8f13 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 @@ -0,0 +1,3 @@ +The issue describes incorrect behavior of the `fmul8x16` VIS instruction in QEMU's SPARC emulation compared to real hardware. This points to a problem with how the specific instruction is implemented or handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 new file mode 100644 index 00000000..247d8fd3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 @@ -0,0 +1,12 @@ +The issue involves an uncaught target signal SIGILL (Illegal Instruction) while the program has registered a handler for it. This is related to how QEMU handles signals during execution, specifically when an illegal instruction occurs. + +Step-by-step explanation: +1. The binary registers a handler for SIGILL. +2. When an illegal instruction is executed at address 0x10A68, the handler should be invoked. +3. In QEMU version 2.5.0, this works as expected, and the program continues execution. +4. In QEMU version 2.11.1, instead of invoking the handler, QEMU crashes with an "uncaught target signal" error. +5. This indicates a regression or bug in how QEMU handles signals in newer versions. + +The problem is classified under **instruction** because it pertains to handling illegal instructions and signals during program execution. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 new file mode 100644 index 00000000..b30756da --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 @@ -0,0 +1,3 @@ +The bug report discusses an issue where QEMU does not properly handle unaligned data access for certain ARM32 instructions, leading to incorrect behavior that violates the ARM documentation. Specifically, it points out that instructions like LDRD and STRD should raise alignment faults when accessing unaligned addresses but do not in QEMU. This falls under issues related to instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 new file mode 100644 index 00000000..923c1898 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 @@ -0,0 +1,3 @@ +The issue arises from mixing threads and signals in a program compiled with musl's libc for i386, leading to a segfault due to problematic TCG-generated code accessing %gs. This points to an error in how QEMU handles specific instructions when emulating 32-bit x86 code. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 new file mode 100644 index 00000000..3c0da834 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 @@ -0,0 +1,10 @@ +The bug report describes an abnormal segfault occurring in qemu-riscv64-static when running a specific test. The issue arises from a regression caused by a particular commit and results in a segmentation fault during execution. Analyzing the backtrace shows that the crash happens in code_gen_buffer, which is related to instruction generation. This indicates a problem with how instructions are being generated or handled. + +The possible categories provided are: +1. **instruction**: Involves issues with specific CPU instructions. +2. **syscall**: Relates to errors in system calls. +3. **runtime**: Pertains to general runtime errors that don't fall into the other two categories. + +Given that the issue is tied to a faulty instruction causing a segfault during code generation, it fits best under the "instruction" category. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 new file mode 100644 index 00000000..1401749a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 @@ -0,0 +1,3 @@ +The issue involves a segmentation fault occurring when incrementing a gcov counter in QEMU 8.0.0 but not in version 6.2.0. The problem seems to be related to how instructions are handled, specifically the `str x8, [x9, #2512]` instruction which causes a segfault. This points to an issue with the instruction execution rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 new file mode 100644 index 00000000..6f8553d5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 @@ -0,0 +1,5 @@ +The bug report discusses an issue with QEMU's emulation of the `fmadds` instruction on PowerPC64LE architecture. It provides specific test results showing incorrect behavior under QEMU compared to real hardware. The analysis indicates that QEMU is not using the correct floating-point functions (`fma()` or `fmaf()`) from the host system, which are functioning properly in the host's glibc. + +Since the issue pertains directly to how QEMU emulates a specific instruction (fmadds), it falls under the category of an **instruction** bug. The problem is not related to system calls or general runtime errors but specifically to the emulation of a particular machine instruction. + +Answer: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 new file mode 100644 index 00000000..a6221fc0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 @@ -0,0 +1,7 @@ +The issue involves an "Illegal instruction" error when running a binary under QEMU, but not when using GDB for remote debugging. This suggests that the problem is related to how specific instructions are being executed by QEMU. Since the binary works correctly with GDB and only fails in QEMU, it points to a potential bug in QEMU's handling of certain instructions. + +The ELF file header indicates that the binary is an ARM executable, and QEMU version 4.0.0 is being used. The error occurs during runtime execution by QEMU but not under GDB. This pattern suggests that there might be an issue with how QEMU emulates or processes specific ARM instructions. + +Given these details, the problem falls under the category of **instruction** issues within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 new file mode 100644 index 00000000..273e3e5e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 @@ -0,0 +1,3 @@ +The issue involves an incorrect exception being raised when executing an SSE4.2 CRC32 instruction using QEMU's TCG acceleration. This points to a problem with how specific instructions are handled rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 new file mode 100644 index 00000000..1f14fc6b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 @@ -0,0 +1,3 @@ +The issue involves incorrect simulation of RISCV64 32-bit AMOs (Atomic Memory Operations). The problem arises from the use of `tcg_gen_atomic_fetch_<op>_tl` instead of `tcg_gen_atomic_fetch_<op>_i32`, leading to incorrect behavior in atomic operations. This directly relates to how specific instructions are implemented and handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 new file mode 100644 index 00000000..52d03cde --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 @@ -0,0 +1,3 @@ +The bug report discusses an issue with how QEMU handles a specific Thumb32 STR instruction, particularly when Rn is set to 1111. This indicates a problem with instruction decoding and handling, fitting into the "instruction" category. + +(instruction) \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 new file mode 100644 index 00000000..7118d336 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 @@ -0,0 +1,3 @@ +The bug report discusses an issue with how QEMU handles a specific ARMv7 Thumb instruction (BLX imm), particularly when the H bit is set to 1, which should be undefined according to the manual but isn't properly checked in the code. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 new file mode 100644 index 00000000..f4d87df3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 @@ -0,0 +1,3 @@ +The bug report describes an issue with the WFI instruction causing a CPU exception in QEMU, which falls under issues related to specific instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 new file mode 100644 index 00000000..6d4e2052 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 @@ -0,0 +1,3 @@ +The issue arises from HWAddressSanitizer detecting a SEGV signal instead of a tag mismatch when running under qemu-aarch64. This points to a problem in how memory access is being handled or reported, likely due to an incorrect implementation or handling of memory tagging in QEMU's MTE (Memory Tagging Extension) support. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 new file mode 100644 index 00000000..2d9fb077 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 @@ -0,0 +1,3 @@ +The issue revolves around specific VSX vector instructions not functioning as expected when handling NaN values, leading to incorrect integer conversion results. This points directly to a problem with how these particular instructions are implemented in QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 new file mode 100644 index 00000000..e56a8f09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 @@ -0,0 +1,3 @@ +The bug report discusses an issue where the `mffsl` instruction causes a SIGILL crash when emulated under QEMU, but works correctly on actual POWER8 hardware. This points to a problem with how QEMU handles or emulates this specific instruction. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 new file mode 100644 index 00000000..0181b82b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 @@ -0,0 +1,10 @@ +The bug report describes a situation where QEMU crashes due to an arithmetic operation that causes a SIGFPE (signal for floating-point exception). Specifically, when certain division operations are performed on the m68k target platform, QEMU fails to handle these operations correctly and crashes. This is related to how QEMU emulates or interprets instructions on the m68k architecture. + +The key points in the bug report include: +- A minimal test program that causes the crash by performing an integer division of `INT_MIN` by `-1`. +- An alternative example using assembly code with specific move and divide instructions. +- The mention that this was discovered while porting NetBSD to QEMU's m68k "virt" platform, indicating it affects real-world use cases. + +The bug does not involve a system call (syscall) error or other runtime errors outside of instruction emulation. Instead, it is directly related to the execution and handling of specific instructions within QEMU's m68k emulation. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 new file mode 100644 index 00000000..43c2f6e7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 @@ -0,0 +1,3 @@ +The issue lies within an ARM instruction's functionality not behaving as expected, leading to incorrect results when executing the SMOPA (4-way) outer product instruction. This points directly to a problem with the implementation or handling of that specific instruction in QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 new file mode 100644 index 00000000..87ef6901 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 @@ -0,0 +1,3 @@ +The problem revolves around an issue with the `sqshrn` instruction, where its emulation differs between QEMU and actual hardware, leading to test failures. The failed tests indicate that the emulation does not correctly replicate the behavior expected from real AArch64 hardware for this specific instruction. + +**Category:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 new file mode 100644 index 00000000..45706f0f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 @@ -0,0 +1,18 @@ +The issue involves a segmentation fault (segfault) when running `ldconfig` within a QEMU user-static environment, specifically when using an ARM64 rootfs on an x86_64 host. This suggests that there's an error in how instructions are being handled or translated between the two architectures. + +**Step-by-step Explanation:** + +1. **QEMU User-Static Environment:** The user is running an ARM64 binary (ldconfig) on an x86_64 host using QEMU's user mode emulation. + +2. **Segfault Occurrence:** A segfault indicates that there's an attempt to access a memory location without proper permissions or the memory address being invalid. + +3. **Possible Causes:** + - **Instruction Fault:** The ARM64 instruction set might be translating incorrectly to x86_64, causing invalid opcodes or addressing modes. + - **System Call Error:** Issues with how system calls are being translated or handled could lead to incorrect memory access. + - **Runtime Environment:** Problems with the runtime environment setup (e.g., mounted rootfs, missing libraries) might cause `ldconfig` to malfunction. + +4. **Classification:** The most likely category is "instruction" because the problem relates to executing ARM64 instructions on an x86_64 host, where incorrect translation could lead to invalid memory accesses causing a segfault. + +**Answer:** + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 new file mode 100644 index 00000000..7b5bea05 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 @@ -0,0 +1,3 @@ +The bug report indicates that specific LSX instructions (LSX stands for Load/Store eXtended) are producing incorrect results when running on a LoongArch host using QEMU's user mode emulation. This points to an issue with how these particular instructions are being emulated or handled within QEMU, rather than a system call error or a general runtime issue. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 new file mode 100644 index 00000000..2303e56c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 @@ -0,0 +1,3 @@ +The issue pertains to an error in the computation of the CF flag for the BLSI instruction within QEMU. This indicates a problem with how a specific CPU instruction is being emulated or handled by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 new file mode 100644 index 00000000..56b87fad --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 @@ -0,0 +1,3 @@ +The issue appears to be related to incorrect behavior in executing specific ARM64 instructions within QEMU, leading to wrong results from the `sxtb` instruction. This points to a problem with how certain instructions are emulated or handled. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 new file mode 100644 index 00000000..21d557a1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect emulation of the `ADDV` opcode within QEMU, affecting how the instruction operates on registers and handles overflow conditions. This falls under the **instruction** category as it pertains to the emulator's handling of specific machine instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 new file mode 100644 index 00000000..8b5eedf9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 @@ -0,0 +1,3 @@ +The issue is related to how QEMU emulates the SUBV instruction, specifically regarding underflow detection not functioning correctly. This directly pertains to an emulation problem with a specific CPU instruction, so it falls under the "instruction" category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 new file mode 100644 index 00000000..68017215 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 @@ -0,0 +1,3 @@ +The bug report describes an issue with the SDIV instruction in QEMU, specifically when handling negative divisors. This directly relates to how instructions are processed within the emulator, making it an **instruction**-related bug. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 new file mode 100644 index 00000000..ab8ceac2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 @@ -0,0 +1,3 @@ +The bug report describes a crash when running `qemu-x86_64` on LoongArch after a specific commit. The error message "Bus error (core dumped)" suggests an issue related to memory access or instruction execution, which points towards a problem with instructions. Therefore, the category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 new file mode 100644 index 00000000..d075e454 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 @@ -0,0 +1,3 @@ +The bug report describes an issue within QEMU's implementation of the RISC-V `froundnx.h` instruction. The problem arises from incorrect handling of NaN-boxing for half-precision floating-point numbers, leading to improper results when invalidly formatted NaN values are processed. This falls under issues related to instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 new file mode 100644 index 00000000..79fcdd0e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 @@ -0,0 +1,3 @@ +The issue pertains to an incorrect implementation of an ARM instruction within QEMU, specifically affecting how matrix multiplication is handled for certain data types and sizes. This directly relates to how the processor's instructions are emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 new file mode 100644 index 00000000..78cf9a1e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 @@ -0,0 +1,3 @@ +The bug report describes an issue with the FMOPA/FMOPS widening instructions in QEMU's AArch64 implementation. Specifically, it mentions that these instructions incorrectly handle floating-point conversions when the FZ and FZ16 flags are set, leading to wrong results. The problem lies within the instruction execution logic of the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 new file mode 100644 index 00000000..f41121e3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 @@ -0,0 +1,3 @@ +The issue pertains to an incorrect implementation of the `fjcvtzs` instruction within QEMU's ARM/vfp helper functions. This misbehavior affects how the PSTATE.Z flag is set when dealing with denormalized numbers and flushing them to zero. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 new file mode 100644 index 00000000..0e6289a4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 @@ -0,0 +1,3 @@ +The issue is directly related to an ARM instruction (VCMLA) within QEMU's implementation, where the helper functions for these instructions incorrectly handle vector register modifications due to miscalculations in element boundaries. This leads to unintended changes in unrelated registers. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 new file mode 100644 index 00000000..c99dc63a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect behavior of the `SLL` instruction in QEMU when handling logical shifts, indicating a problem with how this specific RISC-V instruction is implemented or emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 new file mode 100644 index 00000000..5b5521a7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 @@ -0,0 +1,3 @@ +The bug report describes an issue with how the `ldapr_stlr_i` instructions handle signed offsets, specifically that the immediate field (`imm`) should be treated as a signed 9-bit value (`s9`) rather than an unsigned 9-bit value. This is related to instruction decoding and handling within QEMU's ARM target emulation. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 new file mode 100644 index 00000000..a8ec32f9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `vsetvli` instruction in QEMU where the `vill` bit is not set as specified by the RISC-V V Spec when using a reserved form of the instruction. This directly relates to how the instruction behaves, making it an **instruction** category issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 new file mode 100644 index 00000000..3b18becb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 @@ -0,0 +1,3 @@ +The issue revolves around incorrect translations of the `vpgatherqq` instruction when specific registers like `xmm4` are involved. This points to a problem within the instruction translation logic itself rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 new file mode 100644 index 00000000..97ce9295 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 @@ -0,0 +1,3 @@ +The bug report describes an issue with the `jsr (SP)` instruction in QEMU where the return address is incorrectly handled, leading to execution of garbage data. This relates directly to how an instruction is being processed, indicating a problem with the instruction implementation itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 new file mode 100644 index 00000000..b6e4300e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 @@ -0,0 +1,3 @@ +The issue arises from changes in how QEMU's TCG (Tiny Code Generator) handles certain instructions for x86_64 targets, specifically related to testing bits and partial registers. This leads to unexpected code paths being reached during execution, causing the crash. The problem is tied to instruction generation and handling within the TCG component. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 new file mode 100644 index 00000000..6ceedf1f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 @@ -0,0 +1,3 @@ +The issue involves an unimplemented register in QEMU's FPU, causing test failures when instructions interact with that register. + +classification: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 new file mode 100644 index 00000000..253889eb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `fmovem` instruction in QEMU's m68k emulation, specifically regarding the incorrect order of reading/writing FPU control registers. This directly relates to how instructions are handled within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 new file mode 100644 index 00000000..18455bc6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 @@ -0,0 +1,3 @@ +The given bug report discusses an issue where the `fsave` and `frestore` instructions are not enabled for 68020/68030 processors in QEMU. This is related to how specific instructions are handled by the emulator, which falls under the category of **instruction** bugs. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 new file mode 100644 index 00000000..ed8dbef8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 @@ -0,0 +1,3 @@ +The bug report discusses an issue with QEMU not implementing specific MMU instructions (like `pmove`) for the 68030 processor and incorrectly generating an f-line exception instead of executing the intended operation. This directly relates to how QEMU handles these particular instructions, which are crucial for the correct functioning of the CPU's memory management unit. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 new file mode 100644 index 00000000..0e5de071 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 @@ -0,0 +1,3 @@ +The issue involves incorrect behavior of specific ARM SVE instructions (SDOT and UDOT) when using 64-bit elements in QEMU, which is part of the runtime environment handling these instructions. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 new file mode 100644 index 00000000..a08d479d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 @@ -0,0 +1,3 @@ +The issue arises due to incorrect optimization by TCG (Tiny Code Generator) that breaks memory access ordering, leading to register dependency issues and incorrect behavior in multithreaded environments. This falls under the realm of runtime errors because it affects how the program executes dynamically after compilation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 new file mode 100644 index 00000000..a14d92c2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 @@ -0,0 +1,3 @@ +The issue lies within the conditional judgment where `acc_flag` is checked against `PAGE_WRITE`, but based on the earlier code, `acc_flag` can only take the values `PAGE_WRITE_ORG`, `PAGE_READ`, or `PAGE_EXEC`. This means comparing it to `PAGE_WRITE` directly will never be true and likely leads to unintended behavior in memory access handling. This is an example of a faulty instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 new file mode 100644 index 00000000..5eced6e4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 @@ -0,0 +1,13 @@ +The bug report describes an issue where a binary contains an illegal instruction following a `jal` instruction in RISC-V64 baremetal emulation. The problem arises because after executing the `jal`, the next instruction is illegal, leading to an exception. This is related to how instructions are handled during execution. + +**instruction** + +Step-by-step explanation: + +1. **Understanding the Issue**: The binary has an illegal instruction immediately after a `jal` (jump and link) instruction. Normally, the `jal` should redirect control flow, but in this case, the next instruction is being executed instead of taking the jump. + +2. **Identifying the Category**: Since the problem involves the execution of an illegal instruction and how the `jal` is handled, it falls under issues related to instruction handling. + +3. **Categorization**: The categories provided are "instruction," "syscall," and "runtime." This issue clearly pertains to instruction execution, not system calls or general runtime errors. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 new file mode 100644 index 00000000..fbcf82be --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 @@ -0,0 +1,3 @@ +The bug report mentions an "unreachable assertion" in `decode_insns()` when handling an invalid instruction. This indicates that there's an issue with how certain instructions are being decoded or handled by QEMU for Hexagon. Since the problem arises from processing an instruction, it falls under the category of **instruction** bugs. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 new file mode 100644 index 00000000..8f2a8bec --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 @@ -0,0 +1,3 @@ +The issue arises from executing specific assembly instructions that lead to an unexpected result, indicating a problem with how QEMU handles those instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 new file mode 100644 index 00000000..f685ee1b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 @@ -0,0 +1,3 @@ +The bug report describes an issue with specific Sparc instructions (`fdtox` and `fqtox`) not correctly selecting destination registers when they are higher than `f31`. This indicates a problem with how these instructions are handled in QEMU's instruction decoding and execution. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 new file mode 100644 index 00000000..5b02ba72 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 @@ -0,0 +1,3 @@ +The issue revolves around an incorrect implementation of the `xvldi` instruction within QEMU's translation code for LoongArch64 vectors. The bug specifically affects how the instruction interprets and processes its immediate value, leading to incorrect vector data being loaded. + +**Category:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 new file mode 100644 index 00000000..5492d3ac --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 @@ -0,0 +1,3 @@ +The user is asking about support for AVX512 in QEMU user space emulation and wants to classify the given bug report into one of three categories: instruction, syscall, or runtime. The key here is that the issue relates to hardware instruction set emulation, specifically AVX512, which falls under faulty instructions. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 new file mode 100644 index 00000000..b52c31ad --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the decoding of specific instructions (`vldi` and `xvldi`) in QEMU for LoongArch64 architecture. The problem arises because the instruction decoder allows illegal immediates, leading to crashes when these invalid instructions are executed. This falls under issues related to instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 new file mode 100644 index 00000000..dd150e2e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 @@ -0,0 +1,3 @@ +The issue mentions random errors occurring on `aarch64` when executing `__aarch64_cas8_acq_rel`. This indicates a problem at the instruction level since it involves a specific CPU architecture and an atomic compare-and-swap operation, which is a low-level instruction. Therefore, this falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 new file mode 100644 index 00000000..7ed71fdc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 @@ -0,0 +1,3 @@ +The bug report mentions an "incorrect signed comparison in ldsmax instructions" within QEMU's aarch64 implementation. This directly relates to how specific processor instructions are handled incorrectly, indicating a flaw at the instruction level rather than issues with system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 new file mode 100644 index 00000000..fc4ab370 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 @@ -0,0 +1,3 @@ +The given error message indicates an issue within QEMU's ARM translation code, specifically pointing to an unreached code path in `disas_simd_two_reg_misc_fp16`. This suggests a problem related to instruction processing rather than system calls or general runtime errors. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 new file mode 100644 index 00000000..b60c4859 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 @@ -0,0 +1,16 @@ +The user provided a bug report stating "Unable to execute MIPS MSA code due to illegal instruction" and wants it classified into one of three categories: instruction, syscall, or runtime. + +First, I analyze the error message. The problem occurs when executing MIPS MSA (MIPS SIMD Architecture) instructions, which are specific to certain CPU architectures supported by QEMU. The mention of an "illegal instruction" suggests that the system encountered an opcode it doesn't recognize or isn't supposed to handle. + +Next, I consider the possible categories: + +1. **Instruction**: This category is for issues related to faulty or incorrect instructions. Since the error is about executing specific MIPS MSA instructions, this seems relevant. +2. **Syscall**: Errors in system calls are more about interactions between user space and kernel space. The given error doesn't indicate a problem with syscalls. +3. **Runtime**: This is a broader category for runtime errors not covered by the other two. While the error occurs at runtime, it's more specifically tied to an instruction issue. + +Given that the problem stems from attempting to execute specific instructions that QEMU doesn't support or handle correctly, "instruction" is the most accurate classification. +</think> + +The bug report indicates an issue with executing MIPS MSA instructions, which falls under problems with specific instructions rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 new file mode 100644 index 00000000..30f44bf6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 @@ -0,0 +1,3 @@ +The bug report mentions that QEMU incorrectly raises an exception when handling the SSE4.2 CRC32 instruction. This indicates an issue with how specific processor instructions are being emulated or handled within QEMU. Therefore, it falls under the category related to faulty or incorrect handling of instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 new file mode 100644 index 00000000..230d45c3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 @@ -0,0 +1,3 @@ +The issue arises from an assertion failure in the `get_field1` function within QEMU's s390x translation code when running vector instructions. This points to a problem with how specific machine instructions are being handled or translated by QEMU. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 new file mode 100644 index 00000000..2b9f51b2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 @@ -0,0 +1,3 @@ +The issue mentions "cmake crashes on qemu-alpha-user with Illegal Instruction." This indicates that an illegal or invalid instruction is being executed, which falls under the category of an incorrect or faulty CPU instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 new file mode 100644 index 00000000..5ea09c67 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 @@ -0,0 +1,3 @@ +The issue described involves incorrect behavior in QEMU when handling SP-based memory accesses with MTE enabled, leading to false positive tag check faults despite ARM specifications indicating such accesses should be Tag Unchecked. This points directly to an error in how instructions are processed. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 new file mode 100644 index 00000000..34c79302 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 @@ -0,0 +1,3 @@ +The issue revolves around incorrect handling of the overflow condition code when using specific instructions on s390x architecture, which is an instruction-level problem. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 new file mode 100644 index 00000000..d94436ee --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 @@ -0,0 +1,8 @@ +The bug report discusses an issue where the overflow condition code is incorrectly determined after subtraction on s390x architecture when using QEMU. Specifically, it points out that QEMU does not set the overflow condition code correctly during mathematical operations, leading to incorrect results in the provided test program. + +**Category: instruction** + +This classification is appropriate because the bug pertains to how specific CPU instructions (in this case, subtraction and condition codes) are handled within the emulator. The issue lies in the emulation of the s390x architecture's instruction set, particularly how overflow conditions are managed, rather than a system call error or a general runtime problem. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 new file mode 100644 index 00000000..eab27e46 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 @@ -0,0 +1,3 @@ +The issue relates to an incorrect implementation of the floating-point power function in QEMU for HPPA, leading to wrong calculations and potential stack issues. This is classified under "instruction" because it pertains to how specific processor instructions are handled within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 new file mode 100644 index 00000000..52083b2a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 @@ -0,0 +1,3 @@ +The issue involves incorrect execution of specific instructions (`trapcs` causing non-execution of subsequent instructions and an extra instruction being executed), which directly relates to how QEMU emulates the M68020 processor's instruction handling. This falls under an **instruction** emulation problem. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 new file mode 100644 index 00000000..878fd18b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 @@ -0,0 +1,3 @@ +The bug report describes an issue where QEMU crashes due to an unrecognized operation in the TCG optimizer when processing an SVE2 instruction. This indicates that the problem lies within how specific instructions are handled by the emulator, specifically related to instruction optimization. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 new file mode 100644 index 00000000..03e24945 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 @@ -0,0 +1,3 @@ +The bug report describes an issue related to translation blocks generated by Qemu, specifically involving repeated and overlapping instructions. The problem occurs when translating x86_64 code, leading to incorrect or duplicated opcodes within the translated block. This directly pertains to how Qemu handles instruction translation. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 new file mode 100644 index 00000000..db8fe475 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 @@ -0,0 +1,3 @@ +The bug report describes an issue with how QEMU handles a specific SVE2 instruction (`ldnt1sb`), leading to incorrect address calculations and data aborts. The problem lies within the implementation of this particular instruction in QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 new file mode 100644 index 00000000..2236af1c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 @@ -0,0 +1,5 @@ +The bug report discusses an issue where executing the `icebp` instruction (opcode `F1`) results in raising `SIGILL` in QEMU instead of `SIGTRAP`, which is the correct behavior observed on bare-metal Linux. This discrepancy points to a problem with how QEMU emulates or handles the specific `icebp` instruction. + +Since the issue revolves around the emulation of an x86 instruction and its incorrect signal handling, it falls under the category related to faulty instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 new file mode 100644 index 00000000..9b8a572c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 new file mode 100644 index 00000000..b3db7c8f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 @@ -0,0 +1,3 @@ +The issue in the provided code pertains to incorrect handling of the ZF (Zero Flag) for certain x86 instructions (BT/BTS/BTR/BTC) within QEMU's translation logic. The bug causes the Zero Flag to be incorrectly set, which directly relates to how these specific instructions are emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 new file mode 100644 index 00000000..43cb12e0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 @@ -0,0 +1,3 @@ +The issue involves a segmentation fault due to incorrect handling of an address by generated code in TCG for AARCH64. The problem stems from how the upper 32 bits of the helper function's address are loaded into a register before branching, leading to an invalid memory access. This relates directly to an instruction generation flaw. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 new file mode 100644 index 00000000..40d02b10 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 @@ -0,0 +1,3 @@ +The issue revolves around the `bkpt` instruction not being correctly handled by QEMU when translating ARM guest code, leading to a SIGTRAP signal and core dump. This indicates a problem with instruction emulation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 new file mode 100644 index 00000000..0924293c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `fldl` instruction in QEMU's i386 emulation, specifically related to how it handles floating-point operations based on FPU control words. This points directly to a problem with a specific CPU instruction. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 new file mode 100644 index 00000000..7c44cced --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 @@ -0,0 +1,3 @@ +The bug report describes an "Invalid opcode" error specifically mentioning the `vzeroupper` instruction, which is related to an instruction-level issue rather than a syscall or general runtime error. Therefore, it falls under the "instruction" category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 new file mode 100644 index 00000000..c51622fb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect setting of a specific bit (SCTLR_EL1.BT0) in user mode within QEMU, which affects how certain instructions are handled and can lead to incorrect program behavior or crashes. This relates to instruction-level behavior rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1022 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1022 new file mode 100644 index 00000000..a536c9c2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1022 @@ -0,0 +1,9 @@ +The issue arises when QEMU's RISC-V simulation encounters the `vsra.vx` instruction, leading to a segmentation fault. The backtrace points to a problem within the code generation buffer, specifically related to how the instruction is being processed. + +The bug is tied to an incorrect or unsupported handling of the vector instruction `vsra.vx`. This suggests that there's either a mistake in the implementation of this specific instruction within QEMU or perhaps missing support for it under certain configurations. + +Given that the segmentation fault occurs during the execution of a particular instruction, the most appropriate category for this bug is: + +**instruction** + +This classification indicates that the problem lies within how a specific CPU instruction is handled by QEMU. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1550503 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1550503 new file mode 100644 index 00000000..2e52922e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1550503 @@ -0,0 +1,9 @@ +The issue reported is related to an expression that is always true due to specific bitmasks and defines in the code. This type of bug is typically detected at compile-time or during static analysis rather than causing a runtime error. It falls under the category of code style issues, which are generally flagged by tools like sparse or other static analyzers. + +However, based on the provided categories: + +instruction: Refers to issues with specific instructions (e.g., incorrect opcode handling). +syscall: Pertains to errors in system calls. +runtime: Encompasses other errors that occur during execution. + +The most appropriate category for this issue is **runtime**, as it relates to the behavior of the code during execution, even though it's a static analysis finding. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1593 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1593 new file mode 100644 index 00000000..c3f980de --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1593 @@ -0,0 +1,7 @@ +The issue here revolves around how QEMU's SLIRP implementation handles network binding when using the `hostfwd` option. The user expects that specifying a particular bind address (like `127.0.0.1`) would limit the listening socket to only that interface. However, due to the use of `INADDR_ANY`, the application ends up binding to all available interfaces (`*.*`), which is not the intended behavior. + +This problem arises from within the code logic of QEMU's SLIRP module, specifically in how it interprets and applies user-provided network settings during runtime. It doesn't pertain to faulty instructions or incorrect system calls but rather to a logical error in the application's handling of configuration parameters. + +**runtime** + +The issue is categorized under "runtime" because it relates to how QEMU executes and handles network configurations during its operation, rather than being an instruction-level fault or a syscall error. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1617929 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1617929 new file mode 100644 index 00000000..934062a2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1617929 @@ -0,0 +1,5 @@ +The issue revolves around the `pselect` system call causing QEMU to hang. The backtrace from GDB and strace log both point to problems occurring during or after executing this system call. The problem is reproducible but not consistently, and it affects stable versions as well. + +**Answer: syscall** + +The bug report indicates a problem with the `pselect` system call within QEMU, leading to hangs during execution. This falls under the `syscall` category since the issue is directly related to how QEMU handles this specific system call. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1738545 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1738545 new file mode 100644 index 00000000..d16af140 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1738545 @@ -0,0 +1,13 @@ +The issue arises when running a Go binary compiled with `gccgo-7` on QEMU for ARM architecture, specifically when using `qemu-user`. The error message indicates an "mmap errno 9", which corresponds to "Bad file descriptor". This suggests that there's a problem with how system calls related to memory mapping are being handled within QEMU. Since the same binary works fine on real hardware but fails under emulation, it points towards an incompatibility or misimplementation in how QEMU handles certain syscalls. + +Given that the error is tied to `mmap`, which is a system call used for memory management, and considering that this is specific to QEMU's emulation layer, the most appropriate category for this bug would be **syscall**. This categorization aligns with issues related to system calls not functioning as expected within the emulated environment. + +**Step-by-step Explanation:** + +1. **Identify the Error:** The error message "mmap errno 9" signifies that the `mmap` system call is failing with the error code 9, which translates to "Bad file descriptor". + +2. **Understand the Context:** The Go binary works on real hardware but fails when run under QEMU for ARM. This suggests that the issue lies within how QEMU emulates certain system calls. + +3. **Categorize the Bug:** Since the problem is directly related to a system call (`mmap`) not behaving correctly in the emulated environment, it falls under the **syscall** category. + +4. **Conclusion:** The bug report should be classified as a syscall issue because it pertains to the failure of a specific system call within QEMU's emulation layer. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1805913 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1805913 new file mode 100644 index 00000000..2227f171 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1805913 @@ -0,0 +1,3 @@ +The bug report discusses an issue where readdir() returns NULL with errno=EOVERFLOW when running a 32-bit user-static qemu on a 64-bit host. The root cause is related to how glibc handles inode numbers and offsets, which don't fit into 32-bit ranges when using getdents64() from the 64-bit kernel. This leads to EOVERFLOW as per the C standard's requirements for readdir(). The problem arises in the interaction between the 32-bit environment (qemu) and the underlying 64-bit system calls. + +The issue is classified under "syscall" because it pertains to errors occurring during system calls, specifically how getdents64() handles inode numbers and offsets across different bitness environments. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1824344 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1824344 new file mode 100644 index 00000000..984f0de0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1824344 @@ -0,0 +1,18 @@ +The issue described involves an incorrect error code being set when executing certain return instructions (iret/iretq/retf) in user space under specific conditions, leading to potential misclassification of page faults by the guest OS. This is related to how QEMU handles instruction execution and exception handling. + +**instruction** + +This classification is appropriate because the bug pertains to the behavior of specific x86 instructions (iret, iretq, retf) within QEMU's emulation layer, particularly concerning error code generation during page faults. The incorrect setting of bits in the error code directly relates to how these instructions are handled by QEMU when a page fault occurs. + +The problem arises from QEMU not correctly setting bit 2 of the error code pushed onto the stack when such an instruction causes a page fault. In x86 architecture, bit 2 of the error code indicates whether the fault occurred in user mode (bit clear) or supervisor mode (bit set). If this bit is incorrectly left unset, the guest operating system may misinterpret the nature of the fault, potentially leading to erroneous kernel panic situations. + +Furthermore, the provided test case involves executing a small C program that attempts to return from a function using `retf` with an invalid stack pointer. This triggers a page fault, and QEMU's handling (or mishandling) of this scenario leads to the incorrect error code being pushed. The guest OS, relying on these codes for accurate exception handling, may then behave incorrectly. + +The fact that this bug is reproducible only when using specific CPU configurations (like those with SMAP support) suggests that it is tied to how QEMU emulates certain CPU features and handles exceptions in user space versus kernel space. The classification as an "instruction" issue is therefore most fitting because the root cause lies in the emulation of x86 instructions and their associated exception handling mechanisms. + +In summary, this bug report centers around a problem with instruction-level behavior within QEMU's emulation layer, specifically concerning error code generation during page faults triggered by certain return instructions. Therefore, categorizing it under "instruction" accurately reflects the nature of the issue. + +**Final Answer** +The appropriate category for this bug is: + +\boxed{instruction} \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1830 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1830 new file mode 100644 index 00000000..e40ef884 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1830 @@ -0,0 +1,14 @@ +The issue describes a problem where a command hangs and consumes excessive CPU within a CentOS 7 arm64 container running on an Ubuntu 22 AMD64 host. The hanging process is related to the dynamic linker (`ld-2.17.so`), which suggests that it might be stuck in a system call or experiencing issues with process execution. + +Key points: +1. **Command Hanging**: The `LD_DEBUG=all /lib64/ld-2.17.so --list /usr/bin/true` command hangs and takes over the CPU. +2. **Process State**: The process is in state 'R' (Running), indicating it's active but not completing. +3. **Environment Specificity**: This occurs specifically on an AMD64 host running ARM64 containers via QEMU, but not on native ARM64 hardware or Ubuntu 20.04 hosts. + +Given that the problem is environment-specific and involves process execution in a cross-architecture setup using QEMU, it likely relates to how system calls are handled in the emulation layer. This points towards issues with system call translation or handling within QEMU. + +Therefore, the most appropriate category for this bug report is: + +**syscall** + +This categorization suggests that the issue lies in how system calls are being managed or translated by QEMU when running ARM64 binaries on an AMD64 host. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1833 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1833 new file mode 100644 index 00000000..e8dd75d3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1833 @@ -0,0 +1,21 @@ +The issue described pertains to an incorrect implementation of the ARM64 SME ST1Q instruction within QEMU, leading to improper data storage. This is classified under **instruction** as it involves a specific faulty CPU instruction implementation. + +**Step-by-Step Explanation:** + +1. **Understanding the Bug:** The problem lies in how the `ST1Q` (Store 128-bit element) SME instruction is implemented in QEMU. Instead of correctly storing 16 bytes per 128-bit element, it only stores 9 bytes. + +2. **Identifying the Cause:** The incorrect behavior was traced to a specific line in QEMU's source code (`sme_helper.c`), where an offset adjustment used `+1` instead of `+8`, leading to improper data alignment and storage. + +3. **Reproducing the Issue:** A test program was provided that demonstrates the bug. When run, it shows that after executing the `ST1Q` instruction, only a portion of the expected bytes are correctly copied from source to destination memory locations. + +4. **Impact Analysis:** This bug affects data integrity when using SME instructions in QEMU, particularly for contiguous store operations involving 128-bit elements. Such errors can lead to silent data corruption or incorrect program behavior in applications relying on these instructions. + +5. **Solution:** The fix involves correcting the offset adjustment from `+1` to `+8`, ensuring that each 128-bit element is stored correctly as 16 bytes, aligning with the expected behavior of the `ST1Q` instruction. + +**Classification: Instruction** + +The bug report revolves around an issue with a specific CPU instruction's implementation within QEMU. Therefore, it falls under the **instruction** category. + +```plaintext +instruction +``` \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1854738 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1854738 new file mode 100644 index 00000000..b0a9b82e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1854738 @@ -0,0 +1,11 @@ +The bug report discusses issues related to the support for `mttcg` on different PowerPC architectures within QEMU. Specifically, it mentions that `ppc` and `ppc64abi32` do not support `mttcg`, while `ppc64` does. The user is looking to add support for these architectures. + +The provided code snippet shows configuration settings for various PowerPC targets (`ppc`, `ppc64`, `ppc64le`, `ppc64abi32`) and their respective support for `mttcg`. It seems the user wants to ensure that `mttcg` is enabled or correctly handled for these architectures. + +Since the issue revolves around enabling a specific feature (mttcg) for different target architectures, it falls under **runtime** errors. Runtime errors typically involve issues that occur during the execution of the program, such as missing feature support, incorrect configurations, or runtime exceptions. + +Therefore, this bug report should be categorized under: + +**runtime** + +This classification captures the essence of the problem, which is related to the runtime behavior and configuration of QEMU for different PowerPC targets. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1858461 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1858461 new file mode 100644 index 00000000..e28c5d30 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1858461 @@ -0,0 +1,7 @@ +The issue revolves around adding a new system call (syscall) to QEMU for MIPS architecture and encountering an ENOSYS error, indicating that the system call is not recognized. The user attempted to modify `mips_syscall_args` but was unsuccessful because the current implementation in `cpu_loop.c` does not properly handle the new syscall number. + +The problem lies in how syscalls are managed in QEMU's MIPS emulation compared to ARM. While ARM has a structured approach with `ARM_NR_BASE`, MIPS lacks such an organization, leading to the ENOSYS error when the new syscall is called. + +Refactoring the MIPS CPU loop to align with ARM's structure would resolve this issue by ensuring that the new syscall is correctly recognized and handled. This involves updating how syscall numbers are mapped and processed in the MIPS-specific code. + +The categorization of this bug report falls under **syscall**, as it directly pertains to an error related to system calls within QEMU's emulation layer. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1869782 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1869782 new file mode 100644 index 00000000..f0050a20 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1869782 @@ -0,0 +1,11 @@ +The user's issue involves `qemu-arm-static` crashing with a "segmentation fault" when running an `svn checkout` command during a Travis CI build. They've tried reproducing it locally without success and have attempted troubleshooting steps like updating QEMU versions. The problem occurs specifically in the Travis environment, not in an armv7h chroot, leading them to consider removing SVN usage from their scripts. + +The segmentation fault typically indicates an attempt to access memory incorrectly, which could be due to invalid instructions or data accesses. This aligns with runtime issues where the program crashes due to memory management problems rather than specific syscall errors or incorrect instructions in the code. + +Thus, the appropriate category for this bug report is: + +**runtime** + +# Answer + +The given issue falls under the **runtime** category as it relates to a crash during execution, likely due to memory access problems. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1895 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1895 new file mode 100644 index 00000000..2062b6a1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1895 @@ -0,0 +1,7 @@ +The bug report describes an issue where `qemu-user` uses a fixed stack size and ignores `RLIMIT_STACK`, leading to segmentation faults when running certain programs like `g++`. This problem is not reproducible on actual hardware, indicating it's specific to the emulation environment provided by `qemu-user`. + +Given that this behavior occurs during runtime execution and isn't directly tied to an incorrect instruction or a syscall error, the most appropriate category for this issue is: + +**runtime** + +This classification captures issues related to the environment in which the code executes, such as resource limitations or constraints imposed by the emulator. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1898954 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1898954 new file mode 100644 index 00000000..b388f888 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1898954 @@ -0,0 +1,5 @@ +The user provided a detailed bug report related to QEMU where executing an `f1` opcode causes issues on Windows but works fine elsewhere. The problem seems to be specific to how QEMU handles certain instructions, particularly the `f1` opcode. + +**Answer: instruction** + +This classification is based on the description pointing towards a faulty or improperly handled CPU instruction (`f1`) within QEMU's emulation layer. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1906193 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1906193 new file mode 100644 index 00000000..45c535e9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1906193 @@ -0,0 +1,13 @@ +The issue involves the incorrect return value from `fork()` and `wait()` system calls in a RISC-V 32-bit environment under QEMU emulation. Specifically, when the child process exits with status 42, the parent process receives 40 instead. This discrepancy points to a problem with how exit statuses are handled during system calls. + +The key steps in identifying the category: + +1. **Understanding the Program**: The program uses `fork()` to create a child process which exits with `exit(42)`. The parent waits for the child and checks the exit status using `WEXITSTATUS()`, expecting 42 but receiving 40 instead. + +2. **Symptoms Indicative of System Call Issue**: The incorrect exit status suggests that there's an error in how the exit code is being passed from the child to the parent process. This typically involves system calls like `exit()` and `wait()`. + +3. **Analyzing Possible Causes**: Since the problem occurs during inter-process communication via system calls, it likely relates to how these calls are emulated or handled by QEMU in a RISC-V 32-bit environment. + +4. **Eliminating Other Possibilities**: The issue isn't related to specific instructions misbehaving (so not an instruction category) nor is it a general runtime error outside of system call handling. + +Therefore, the bug is best classified under the **syscall** category because it pertains to errors in system calls used for process management and communication. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1908626 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1908626 new file mode 100644 index 00000000..ab83b68c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1908626 @@ -0,0 +1,7 @@ +The issue revolves around the use of an atomic test-and-set instruction in the spinlock implementation within PostgreSQL/Greenplum when run under QEMU user emulation for ARM64. The problem does not occur on physical ARM64 hardware but arises specifically within the emulated environment provided by QEMU. This suggests that there is a malfunction or misbehavior in how QEMU handles the specific instruction used for the test-and-set operation, which is crucial for the spinlock functionality. + +The bug report indicates that the spinlock mechanism fails under QEMU, leading to timeouts and PANIC errors. Since this behavior does not manifest on physical hardware, it points towards an issue with how QEMU emulates the instruction rather than a flaw in the instruction itself or the operating system's syscalls. Therefore, the problem is classified as an issue related to an instruction. + +```plaintext +instruction +``` \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1910 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1910 new file mode 100644 index 00000000..4665dcb2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1910 @@ -0,0 +1,14 @@ +The issue revolves around a misaligned stack address when handling signals in QEMU for x86_64 userspace. The problem occurs because the signal handler's stack pointer is not properly aligned according to the x86_64 ABI, leading to a crash due to an incorrect `movaps` instruction. + +The key points from the bug report are: + +1. **Problem**: Applications crash in signal handlers due to a misaligned stack address causing a `movaps` instruction to fail. +2. **Symptom**: The crash is reported as a NULL dereference, but GDB shows it's actually caused by a misaligned stack. +3. **Technical Detail**: The x86_64 psABI requires that the stack pointer (`%rsp`) be aligned to a 16-byte boundary when entering a function. However, QEMU's signal handling code does not ensure this alignment when transferring control to the signal handler. +4. **Relevant Code**: The problematic code in `signal.c` adjusts the stack pointer without properly aligning it for x86_64, leading to an unaligned address being used in the signal handler. + +Given that the issue is related to incorrect handling of stack alignment during signal delivery in QEMU's runtime environment, the appropriate category is: + +**runtime** + +This classification fits because the error occurs dynamically during execution (at runtime) and is not directly tied to a specific instruction or system call but rather to how the runtime environment (QEMU) manages the stack for signal handlers. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1915327 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1915327 new file mode 100644 index 00000000..6ca89558 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1915327 @@ -0,0 +1,7 @@ +The issue revolves around incorrect behavior of the `cmpxchg` instruction in QEMU's TCG (Tiny Code Generator) implementation when compared to real CPU behavior. Specifically, QEMU incorrectly zero-extends the EAX register to RAX after a `cmpxchg` operation, which does not align with how the instruction should behave according to Intel specifications. + +**Category: instruction** + +The problem is clearly tied to an incorrect implementation of a specific x86_64 instruction (`cmpxchg`) within QEMU's TCG. This misbehavior affects both regular and locked versions of the `cmpxchg` instruction, leading to unexpected results in applications that rely on this instruction, such as those developed with BPF (Berkeley Packet Filter). The incorrect zero-extension of EAX to RAX violates the expected semantics defined by Intel's documentation, where the accumulator should remain unchanged if the comparison matches. + +Since this is a problem with how QEMU emulates a specific CPU instruction, it falls under the "instruction" category. This classification helps in directing the bug report to the appropriate part of the codebase and development team within the QEMU project that handles instruction emulation. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1967248 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1967248 new file mode 100644 index 00000000..b66e2947 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/1967248 @@ -0,0 +1,9 @@ +The issue described involves an uncaught target signal 5 (Trace/breakpoint trap) when running a binary under QEMU, but not when using GDB. The user also mentions that QEMU's 32-bit ARM Linux-user mode does not correctly handle BKPT instructions by converting them into SIGTRAP signals. + +**Analysis:** +- The problem revolves around the handling of BKPT (breakpoint) instructions in QEMU. +- Specifically, it appears that QEMU is not properly translating these instructions into the appropriate SIGTRAP signal, which is crucial for debugging purposes. +- This misbehavior leads to a core dump when running the program normally but works as expected under GDB. + +**Classification:** +This issue pertains to how QEMU processes specific ARM instructions (BKPT). Therefore, it falls under the **instruction** category. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2374 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2374 new file mode 100644 index 00000000..db22962c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2374 @@ -0,0 +1,20 @@ +The issue lies within the implementation of the FMOPA/FMOPS instructions in QEMU's AArch64 TCG helper functions. Specifically, the problem arises from an invalid pointer being used for floating-point status when handling 32-bit operands, leading to incorrect NaN generation. + +Step-by-step explanation: + +1. **Bug Identification**: + - The `sme_fmopa_s` function in `target/arm/tcg/sme_helper.c` is responsible for matrix multiplication and accumulation. + - When performing 32-bit floating-point operations, the function incorrectly uses an invalid pointer (`vst`) instead of a properly initialized local copy (`fpst`) to handle the floating-point status. + +2. **Consequences**: + - This misuse causes NaN results not to be generated as default NaNs but instead retain their non-default form. + - The test case provided demonstrates this by expecting default NaNs (0x0000c07f) but receiving non-default NaNs (0xffffffff). + +3. **Solution**: + - Modify the function to use `&fpst` instead of `vst` when invoking `float32_muladd`. + - This ensures that the correct floating-point status is used, leading to proper default NaN generation. + +4. **Category Classification**: + - The issue pertains directly to an instruction's implementation within QEMU, making it a clear case of an **instruction** bug. + +The problem is classified under the **instruction** category because it involves incorrect behavior in implementing specific CPU instructions (FMOPA/FMOPS) within the QEMU emulator. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2448 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2448 new file mode 100644 index 00000000..c1d7d8f6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2448 @@ -0,0 +1,5 @@ +The issue revolves around how QEMU's `qemu_getauxval` function handles the `AT_EXECFD` auxiliary vector when its value is zero. Specifically, it incorrectly interprets a valid zero as nonexistent, leading to unexpected behavior where file descriptor 0 remains open and points to the executable. This affects runtime execution, causing programs to read from the executable instead of having standard input closed. + +**Category: runtime** + +The problem arises during runtime execution when QEMU fails to correctly handle the `AT_EXECFD` value, affecting how file descriptors are managed and leading to incorrect behavior in programs that expect certain file descriptor states. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2495 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2495 new file mode 100644 index 00000000..7a4345ab --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2495 @@ -0,0 +1,7 @@ +The issue pertains to incorrect behavior in translating MMX instructions when REX prefixes are involved. This affects how QEMU generates TCG (Tiny Code Generator) code for such instructions, leading to incorrect execution outcomes. The problem is specific to the handling of certain x86-64 MMX instructions with redundant or varying REX prefixes. + +The correct category for this bug report is: + +**instruction** + +This categorization aligns with the fact that the issue revolves around how QEMU processes specific x86-64 MMX instructions and their corresponding REX prefixes, leading to invalid TCG code generation. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2553 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2553 new file mode 100644 index 00000000..037b118c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2553 @@ -0,0 +1,12 @@ +The issue arises from an incorrect structure definition in QEMU's user-mode emulation for PowerPC64, leading to a failed system call when joining IP multicast groups. Specifically, the `imr_ifindex` field in the emulated `struct target_ip_mreqn` is defined as a 64-bit `abi_long`, while it should be a 32-bit integer. This mismatch causes invalid data marshalling during the `setsockopt` call, resulting in an ENODEV error. + +**Steps to reproduce:** + +1. **Compile and run natively on x86_64:** The program works as expected. +2. **Cross-compile for PowerPC64 and emulate with QEMU:** The `setsockopt` call fails with "No such device" due to the incorrect structure marshalling. + +**Analysis:** +The problem lies in how QEMU handles the size and alignment of the `ip_mreqn` structure during emulation. The incorrect definition of `imr_ifindex` as a 64-bit value leads to invalid data being passed to the host's system call, causing the failure. Additionally, QEMU's bounds checking for the option length is too permissive, allowing incorrectly sized structures to be processed without proper validation. + +**Conclusion:** +This is a **syscall** bug because it involves incorrect handling of system calls within QEMU's user-mode emulation layer, specifically related to marshalling data structures used in socket operations. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2560 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2560 new file mode 100644 index 00000000..cc6828b2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/2560 @@ -0,0 +1,5 @@ +The issue described involves problems running Go applications under QEMU's x86_64 emulation on an ARM host. The crash occurs specifically when the garbage collector is active, pointing towards a problem in how memory management or specific system calls are handled within QEMU's runtime environment. + +**Answer: syscall** + +This categorization suggests that the bug is related to system call handling within QEMU. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/306 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/306 new file mode 100644 index 00000000..b8c46fe2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/306 @@ -0,0 +1 @@ +The classification of this bug report under QEMU would fall into the **syscall** category since it pertains to constraining the `exec()` system call within an emulated environment. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/739785 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/739785 new file mode 100644 index 00000000..fc7c50b9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/739785 @@ -0,0 +1,11 @@ +The issue described in the bug report revolves around the inability to fork processes in user mode QEMU for i386 on an ARM system. The specific error message "bash: fork: Invalid argument" suggests that there's a problem related to how system calls are being handled, particularly the `fork` system call which is used to create new processes. + +The user has provided detailed steps of their setup and troubleshooting attempts, including compiling QEMU, setting up binfmt_misc, and chrooting into the environment. The problem occurs when they attempt to run commands like `pacman`, indicating a failure in process creation (fork) within the chrooted QEMU environment. + +Given that the error is directly tied to system call functionality (`fork`), it falls under the category of **syscall** issues rather than problems with instructions or general runtime errors. The failed assertion in the dynamic linker further supports this, as it points to underlying issues with how system calls are being emulated or handled within QEMU. + +```json +{ + "category": "syscall" +} +``` \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/829 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/829 new file mode 100644 index 00000000..80e762b1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/manual-review/829 @@ -0,0 +1,18 @@ +The issue revolves around how `openat()` interacts with sysroot path translation under user space emulation in QEMU. The problem arises because when using `openat()`, the file descriptor provided is relative to the sysroot directory instead of the expected root directory (`/tmp`), leading to incorrect behavior. + +This is a **syscall** issue because it pertains to how system calls (specifically `openat()`) are being handled and translated by QEMU's user space emulation layer. The problem isn't directly related to faulty CPU instructions or general runtime errors, but rather to the incorrect handling of system call paths in the emulation environment. + +Here’s a concise breakdown: + +1. **Problem**: The `openat()` syscall is not correctly translating paths relative to the provided file descriptor when using sysroot under QEMU's user space emulation. +2. **Category**: Since it involves the behavior and translation of a specific system call (`openat()`), this falls under the **syscall** category. + +Therefore, the appropriate classification for this bug report is: + +```plaintext +syscall +``` + +```plaintext +syscall +``` \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1010484 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1010484 new file mode 100644 index 00000000..14faee8a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1010484 @@ -0,0 +1,9 @@ +The user provided a bug report related to slirp not allowing non-local DNS servers and mentioned that this is part of qemu. They also specified possible categories: instruction, syscall, or runtime. The task is to classify it. + +First, I need to understand the context. Slirp is a userspace TCP/IP implementation often used in QEMU for networking. The issue here is about DNS server configuration constraints. + +The bug report talks about removing a check that prevents using non-local DNS servers. This doesn't seem to involve a faulty instruction or a syscall error directly. Instead, it's about runtime behavior—specifically, how the application (slirp) handles DNS configurations during execution. + +So, categorizing this under "runtime" makes sense because it's about the application's behavior and constraints during operation, not about incorrect instructions or system calls. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1027 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1027 new file mode 100644 index 00000000..c98e8b2d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1027 @@ -0,0 +1,3 @@ +The issue pertains to how QEMU binaries on macOS should include an embedded property list (plist) for proper functionality and system compatibility, which relates to settings handled at build or compile time rather than runtime errors or specific syscalls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1034 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1034 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1034 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1041 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1041 new file mode 100644 index 00000000..36b4c50e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1041 @@ -0,0 +1,11 @@ +The bug report discusses an issue where QEMU incorrectly sets the `AT_PLATFORM` auxiliary vector value to "i686" instead of "x86_64" when running on x86_64 architecture. This discrepancy affects the program's execution environment and is related to how QEMU handles ELF (Executable and Linkable Format) loading, specifically in the context of user-space emulation. + +### Analysis: +1. **Auxiliary Vectors**: These are used by the kernel to pass information to user-space programs. The `AT_PLATFORM` vector should reflect the platform type. +2. **QEMU's Role**: QEMU is responsible for emulating the environment, including setting these vectors correctly. The bug indicates that QEMU is not setting `AT_PLATFORM` appropriately for x86_64 when it should be "x86_64" instead of "i686". +3. **Impact on Runtime**: This incorrect value can affect how programs detect and utilize platform-specific features, leading to runtime issues or unexpected behavior. + +### Conclusion: +The bug pertains to errors that manifest during the execution or runtime of QEMU, specifically in how it sets up the environment for emulated processes. It does not directly relate to faulty instructions or system calls but rather to the environment setup and configuration, which falls under **runtime** issues. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1044 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1044 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1044 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1052857 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1052857 new file mode 100644 index 00000000..986870da --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1052857 @@ -0,0 +1,5 @@ +The bug report describes an assertion failure occurring during the execution of a statically linked QEMU user binary for PowerPC on a 64-bit host. The error happens when running commands inside a chroot environment set up using debootstrap. The specific assertion that fails is related to signal handling in `signal.c` at line 4341, which suggests an issue with how signals are being managed or translated during runtime. + +This points to a problem that occurs while the program is executing, rather than issues with specific instructions or system calls directly. Therefore, it falls under the "runtime" category, as it relates to errors that manifest during the execution of the QEMU user binary. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1054812 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1054812 new file mode 100644 index 00000000..e0bf6d8d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1054812 @@ -0,0 +1,3 @@ +The issue revolves around a problem that occurs during the configuration and build process of QEMU on Darwin/OS X systems. Specifically, it's about selecting the correct version of libtool to ensure compatibility with building libcacard. This is not related to runtime errors or syscalls but pertains to the instructions and tools used in the build process. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1059 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1059 new file mode 100644 index 00000000..341fc611 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1059 @@ -0,0 +1,23 @@ +The issue arises during the execution of a Docker image that uses QEMU on macOS. The error message indicates that QEMU encountered an uncaught target signal 6 (Aborted), leading to a core dump. This typically occurs when a process receives a SIGABRT signal, often due to runtime issues such as assertions, fatal errors, or abnormal program termination. + +**Step-by-Step Explanation:** + +1. **Understanding the Error:** The error message "qemu: uncaught target signal 6 (Aborted) - core dumped" suggests that QEMU received a SIGABRT signal, which is commonly used to indicate an abort or fatal error within the application. + +2. **Identifying the Cause:** Since this occurs while using Docker images on macOS with QEMU, potential causes could include: + - Compatibility issues between QEMU and the underlying system (e.g., macOS). + - Issues with the specific Docker image configuration. + - Resource constraints or environment setup problems. + +3. **Possible Solutions:** + - **Check Docker and QEMU Versions:** Ensure that both Docker and QEMU are up to date, as newer versions may resolve known issues. + - **Review Docker Configuration:** Examine the Dockerfile and container settings for any misconfigurations that could lead to runtime errors. + - **Inspect System Logs:** Look into system logs (e.g., using `dmesg` or Docker logs) for additional error details that might pinpoint the root cause. + - **Test on Different Platforms:** Try running the same Docker image on a different operating system to isolate whether the issue is macOS-specific. + +4. **Further Diagnosis:** If the problem persists, consider reaching out to the Botfront community or checking their support resources for known issues related to QEMU on macOS. + +**Final Thoughts:** +This error points to a runtime issue within QEMU when executed through Docker on macOS. Addressing it likely involves updating software components, adjusting configurations, or seeking community support for platform-specific fixes. + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1068900 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1068900 new file mode 100644 index 00000000..11821a50 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1068900 @@ -0,0 +1,3 @@ +The bug report describes an issue related to thread cancellation and signal handling within QEMU's application-level emulation. It discusses how certain signals are being used internally by QEMU, causing conflicts when applications rely on those same signals. This problem arises during runtime execution rather than being tied directly to a specific instruction or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1070 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1070 new file mode 100644 index 00000000..3e1b51a2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1070 @@ -0,0 +1,3 @@ +The bug report describes an issue where generating XML for ARM CPU registers is done unnecessarily for every vCPU, leading to excessive memory usage when many threads are present. This indicates a problem that occurs during runtime execution rather than being related to specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1075 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1075 new file mode 100644 index 00000000..9fd7cc6e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1075 @@ -0,0 +1,3 @@ +The issue revolves around running a ppc64le-specific binary on an x86 host using QEMU user emulation. The steps involve setting up multiarch support and trying to create a Kubernetes cluster using kind. The problem likely arises from compatibility issues or misconfigurations during runtime when executing the ppc64le binary on a different architecture. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1093 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1093 new file mode 100644 index 00000000..78d55b6d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1093 @@ -0,0 +1,3 @@ +The issue arises from how `qemu-user` handles signal frames on RISC-V 64, specifically misaligning them to 4 bytes instead of the required 16 bytes. This causes problems like UBSan diagnostics for pointer misalignment. The bug is related to the runtime environment where signal handling occurs. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1098729 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1098729 new file mode 100644 index 00000000..5084e490 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1098729 @@ -0,0 +1,13 @@ +The issue involves segfaults and assertion failures in multi-threaded programs when running under QEMU user mode emulation for ARM (armhf). These problems occur at runtime during the execution of the program, particularly affecting thread handling and temporary variable management within the Translation Cache Generator (TCG) of QEMU. + +**Step-by-Step Explanation:** + +1. **Runtime Errors Observed:** The application crashes with segmentation faults or hangs, indicating issues during execution. +2. **Assertion Failures in TCG:** Specific assertions fail within QEMU's TCG component, such as `tcg_gen_goto_tb` and `tcg_temp_free_internal`. These failures suggest that internal invariants expected by the code are not being met. +3. **Multi-threading Context:** The problems manifest particularly with multi-threaded applications, pointing to potential issues with how QEMU handles threading in user mode emulation for ARM targets. + +Given these observations, the errors pertain to issues arising during the runtime execution of the emulator rather than being related to specific instructions or system calls. + +**Answer:** + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1102 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1102 new file mode 100644 index 00000000..b8daf728 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1102 @@ -0,0 +1,5 @@ +The bug report discusses an issue where a specific PT_LOAD segment in an ELF file causes a segmentation fault when run using qemu-aarch64. The problem arises because the code attempts to zero out memory without checking if it's writable. This is related to how QEMU handles certain segments during runtime, specifically the BSS section. + +This falls under **runtime** errors as it's about the program crashing due to an invalid operation (writing to non-writable memory) while executing or loading the ELF file in QEMU. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1143 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1143 new file mode 100644 index 00000000..431c2fd7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1143 @@ -0,0 +1,3 @@ +The issue described relates to how QEMU handles breakpoints when a function spans two memory pages, specifically causing some breakpoints to be ignored during execution. This is an issue that occurs during the runtime of the program being debugged. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1147 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1147 new file mode 100644 index 00000000..558f1554 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1147 @@ -0,0 +1,3 @@ +The issue describes an assertion failure related to CPU execution in QEMU when running x86_64 binaries on an AArch64 host. This is not tied directly to specific instructions or syscalls but rather to runtime behavior, specifically how QEMU handles CPU state and synchronization mechanisms like RCU (Read-Copy Update). The errors indicate problems during the execution of code that involve concurrency and thread-safety checks. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1165383 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1165383 new file mode 100644 index 00000000..d953b149 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1165383 @@ -0,0 +1,3 @@ +The bug report mentions a segmentation fault when running an executable under QEMU. A segmentation fault typically occurs during runtime when there's an attempt to access memory incorrectly or outside the allowed regions. This suggests it's not directly related to specific instructions or syscalls but rather an issue that arises during execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1172613 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1172613 new file mode 100644 index 00000000..bbb7b76f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1172613 @@ -0,0 +1,3 @@ +The issue lies in how QEMU handles different architectures when running binaries compiled for those architectures. The problem occurs during runtime when QEMU tries to load shared libraries and execute the binary, leading to segmentation faults or incorrect behavior depending on the architecture. This is not related to specific instructions or syscalls but rather to general execution and library loading issues. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1182490 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1182490 new file mode 100644 index 00000000..53cde139 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1182490 @@ -0,0 +1,3 @@ +The issue arises because `to_` is passed as NULL to `qemu_coroutine_switch`, leading to a segmentation fault when attempting to access `to->action`. This is an error that occurs during runtime due to improper handling of a coroutine switch operation. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1187319 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1187319 new file mode 100644 index 00000000..e63f2396 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1187319 @@ -0,0 +1,3 @@ +The issue involves the SDL library not responding to specific keyboard shortcuts (Ctrl-Alt-- and Ctrl-Alt-+), which are supposed to resize windows but aren't functioning as intended. This points to a problem occurring during the execution of the program, specifically related to how SDL handles input events. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1207896 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1207896 new file mode 100644 index 00000000..3aadd3a3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1207896 @@ -0,0 +1,9 @@ +The user provided a bug report related to QEMU and asked for it to be classified into one of three categories: instruction, syscall, or runtime. The key details mention a patch regarding `binfmt` wrapper handling of `argv[0]`, which is crucial for compatibility with GNU/Linux distributions. + +1. **Instruction**: This typically refers to issues with specific CPU instructions or their emulation in QEMU. +2. **Syscall**: This involves errors in system calls, such as incorrect handling or implementation of system call interfaces. +3. **Runtime**: This category covers other runtime-related issues that don't fit into the first two categories. + +The bug report discusses a patch for `binfmt` wrapper handling, which relates to how QEMU manages command-line arguments during execution. Since this is about the runtime behavior of QEMU rather than specific instructions or system calls, it falls under the **runtime** category. + +Answer: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1209 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1209 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1209 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/121 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/121 new file mode 100644 index 00000000..53faf81d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/121 @@ -0,0 +1,3 @@ +The issue is about a multiprocess program producing incorrect results when using qemu arm-linux-user. This suggests that the problem occurs during the execution or runtime of the program, rather than being related to specific instructions or system calls directly. Therefore, it falls under the "runtime" category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1211 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1211 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1211 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1228 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1228 new file mode 100644 index 00000000..21333ad8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1228 @@ -0,0 +1,3 @@ +The issue revolves around input handling and escape sequences not being recognized properly when using the curses display in QEMU, which points to problems during runtime execution rather than issues with specific instructions or syscalls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1245703 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1245703 new file mode 100644 index 00000000..d5f93562 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1245703 @@ -0,0 +1,3 @@ +The issue arises during runtime when QEMU processes directories recursively, leading to excessive memory usage and potential crashes due to endless loops caused by symbolic links. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1248168 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1248168 new file mode 100644 index 00000000..2a0fe190 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1248168 @@ -0,0 +1,3 @@ +The issue revolves around self-modifying code not functioning as expected when run from uncached memory regions in MIPS, specifically within QEMU. This points to problems during program execution rather than issues with specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1254828 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1254828 new file mode 100644 index 00000000..313ef2a7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1254828 @@ -0,0 +1,3 @@ +The issue occurs during the second stage of debootstrap for a sparc64 Debian guest, resulting in a segmentation fault. The problem arises when running `chroot sparc64 /debootstrap/debootstrap --second-stage`, indicating an error related to the execution or compatibility of the chroot environment on different architectures (amd64 and i386). This points to issues with how QEMU handles user-space emulation for SPARC64 binaries, which is a runtime problem rather than a specific instruction fault or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1255 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1255 new file mode 100644 index 00000000..1e743e9b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1255 @@ -0,0 +1,5 @@ +The bug report describes an issue where `qemu-arm` fails to allocate memory for the guest commpage when running `systemctl`, specifically mentioning that the problem started in versions after v5.0.0 and relates to an existing issue (Issue 690). The error occurs during runtime execution, not due to a specific instruction or syscall. + +Thus, this falls under the **runtime** category. + +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1261743 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1261743 new file mode 100644 index 00000000..38537a14 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1261743 @@ -0,0 +1,3 @@ +The issue involves incorrect event IDs and mishandling of the "disable" property when using the "simple" trace backend in QEMU. This leads to missing or mixed logs in the trace file, which affects how events are recorded during runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1285363 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1285363 new file mode 100644 index 00000000..814c39a0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1285363 @@ -0,0 +1,3 @@ +The issue arises from a segmentation fault during runtime, specifically when using qemu-aarch64-static, which points to problems in handling signals and frame setup within the QEMU code. This falls under runtime errors as it's related to how the program executes rather than specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1287195 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1287195 new file mode 100644 index 00000000..4cdb4eee --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1287195 @@ -0,0 +1,11 @@ +The issue described involves the incorrect enabling of `validate_guest_space` for AArch64 targets in QEMU's elfload.c file. This function is meant to reserve space for the ARM commpage but shouldn't be enabled on AArch64 since there is no commpage there. The problem occurs during runtime when running a Linux user target, indicating it's not about an instruction or a syscall but rather about incorrect behavior happening during execution. + +The possible categories are: + +- **instruction**: Issues with specific instructions. +- **syscall**: Errors related to system calls. +- **runtime**: Other errors occurring during program execution. + +Since the bug pertains to incorrect runtime behavior related to memory space validation, it falls under the "runtime" category. + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1294898 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1294898 new file mode 100644 index 00000000..1cfcd7d9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1294898 @@ -0,0 +1,3 @@ +The issue described pertains to the behavior of the graphical user interface (GUI) when using GTK3, specifically regarding the visibility and functionality of the menu bar in fullscreen mode. This is related to how widgets are managed at runtime, making it a **runtime** issue. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1311614 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1311614 new file mode 100644 index 00000000..b6d42983 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1311614 @@ -0,0 +1,3 @@ +The issue described involves a segmentation fault when running ARM chroot with QEMU emulation after upgrading GCC to 4.9.0. This indicates a problem that occurs during the execution of the program, likely due to incompatibilities introduced by the newer compiler version. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1319100 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1319100 new file mode 100644 index 00000000..4090cadb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1319100 @@ -0,0 +1,9 @@ +The bug report discusses an issue with `qemu-arm-static` where signal handling causes hangs when running Mono and Java in a chroot environment. This is related to how signals are handled during thread termination, specifically involving futex operations and signal routing between threads. The problem occurs at runtime when these applications are executed under QEMU user emulation. + +The appropriate category for this issue is: + +**runtime** + +This classification captures the fact that the bug manifests during the execution of programs (Mono and Java) under QEMU's user-mode emulation, specifically related to how signals and futexes are managed between threads. It does not directly point to a specific instruction fault or a syscall error but rather an issue arising from the interaction of these components during runtime. + +**runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1346784 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1346784 new file mode 100644 index 00000000..7182272f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1346784 @@ -0,0 +1,3 @@ +The bug report describes an issue where QEMU's internal memory areas are visible to the guest through `/proc/self/maps`, which is related to how the memory mappings are handled during runtime. This doesn't directly involve faulty instructions or errors in system calls but pertains to the runtime environment's memory management. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357206 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357206 new file mode 100644 index 00000000..bef40c00 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357206 @@ -0,0 +1,3 @@ +The issue occurs during the emulation of multi-threaded code using QEMU user mode, leading to segmentation faults. This indicates a problem that arises when the program is running, specifically related to how threads are handled or resources are managed in the emulated environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357226 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357226 new file mode 100644 index 00000000..4492a350 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1357226 @@ -0,0 +1,3 @@ +The issue arises when running `convert` under QEMU for ARM, resulting in a segmentation fault. This indicates an unexpected crash during execution, likely due to memory access issues or incorrect instruction handling. It doesn't involve system calls directly but rather runtime behavior. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1362635 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1362635 new file mode 100644 index 00000000..42761aab --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1362635 @@ -0,0 +1,5 @@ +The bug occurs due to how coroutines are managed during asynchronous I/O operations in QEMU's block driver. When `bdrv_read` is called recursively in a loop, it can lead to a situation where `bdrv_co_io_em_complete` is invoked before `qemu_coroutine_yield`, causing the coroutine to re-enter itself recursively. This results in a failure with the message "co-routine re-entered recursively." + +The issue arises from the runtime behavior of the coroutines and how they interact during I/O completion, rather than a specific instruction or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1388 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1388 new file mode 100644 index 00000000..a0285dfa --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1388 @@ -0,0 +1,3 @@ +The issue describes that the Windows installer for QEMU 7.2.0 isn't available on the specified repositories, which affects the installation and usage of the software on x86 and x64 platforms. This falls under problems encountered during runtime or general functionality issues rather than specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1429313 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1429313 new file mode 100644 index 00000000..6ef8326b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1429313 @@ -0,0 +1,3 @@ +The issue described involves signal handling within QEMU's user mode emulation, where signals aren't properly blocked upon entering a target signal handler. This leads to incorrect recursion when multiple signals are received quickly. The problem occurs during runtime execution rather than being related to specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1435 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1435 new file mode 100644 index 00000000..0110dd9b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1435 @@ -0,0 +1,3 @@ +The issue involves an infinite recursion within the TCG (Tiny Code Generator) component of QEMU when generating certain 32-bit operations on specific hosts. This occurs due to a logic error where functions call each other without terminating, leading to resource exhaustion and eventual failure. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1478 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1478 new file mode 100644 index 00000000..12f4ce6b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1478 @@ -0,0 +1,3 @@ +The issue describes a crash occurring during initialization when using QEMU 7.2.0 for an x86-core2-glibc toolchain, specifically mentioning general protection faults and segmentation faults related to `init` processes and libc.so.6. The problem arises in runtime execution rather than being tied to specific instructions or syscalls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1495 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1495 new file mode 100644 index 00000000..8b5d9078 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1495 @@ -0,0 +1,3 @@ +The issue arises from installing `socat` and then running `make check-unit`, which fails on ARM MacOS. This points to a problem occurring during the execution or runtime of the tests, likely related to how dependencies or system calls are handled in that specific environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1512 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1512 new file mode 100644 index 00000000..f9275a4d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1512 @@ -0,0 +1,3 @@ +The bug report mentions that AVX/AVX2 is not correctly detected in user mode, which relates to how QEMU handles CPU instructions and their detection during runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1519037 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1519037 new file mode 100644 index 00000000..c4bf92be --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1519037 @@ -0,0 +1,3 @@ +The issue seems to be related to the environment or how qemu-i386 interacts with it when running 32-bit binaries, as the segfaults disappear under gdb or strace. This suggests it's not a faulty instruction or syscall but something happening at runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1527765 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1527765 new file mode 100644 index 00000000..67bb0c87 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1527765 @@ -0,0 +1,3 @@ +The bug report describes random segfaults when using qemu-sh4-static to run ghc, indicating issues during execution rather than specific instruction faults or system calls. This falls under general runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528 new file mode 100644 index 00000000..dcf605e0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528 @@ -0,0 +1,3 @@ +The issue arises from an assertion failure in `user-exec.c` during runtime when using qemu-arm to run a cross-compiled ARM binary on POWER9 hardware. The error message indicates that there's a problem related to page flags setting, which is not directly tied to a specific instruction or syscall but rather to memory management during execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528239 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528239 new file mode 100644 index 00000000..55040928 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1528239 @@ -0,0 +1,3 @@ +The issue described involves problems debugging PIE (Position-Independent Executable) binaries using QEMU's gdb stub. The user encountered difficulties setting breakpoints and accessing memory addresses during remote debugging. This points to issues related to how QEMU handles runtime execution, particularly with PIE binaries. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1531 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1531 new file mode 100644 index 00000000..1065fe7a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1531 @@ -0,0 +1,3 @@ +The bug report describes an issue where specific tests fail due to problems with QEMU's emulation of MIPS r6+MSA when running a binary built with a cross-compiler. The problem occurs during execution, not related to a particular instruction or system call. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1533141 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1533141 new file mode 100644 index 00000000..c7186177 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1533141 @@ -0,0 +1,3 @@ +The issue involves array index checks and suggests using standard library routines for binary search, indicating problems related to code correctness during execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1547 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1547 new file mode 100644 index 00000000..6060553d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1547 @@ -0,0 +1,3 @@ +The issue described involves incorrect behavior when using POWER9 emulation with compiler optimizations enabled, specifically affecting floating-point operations. This relates to how instructions are handled during execution, indicating a problem at the instruction level rather than system calls or general runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1568107 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1568107 new file mode 100644 index 00000000..6e568046 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1568107 @@ -0,0 +1,3 @@ +The issue arises from `setup_rt_frame` not being implemented in QEMU when running an x86_64 binary on an ARM system using user-mode emulation. This function is related to setting up the runtime frame, which is part of the runtime environment rather than a specific instruction or syscall. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1591611 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1591611 new file mode 100644 index 00000000..afc93560 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1591611 @@ -0,0 +1,7 @@ +The issue involves an assertion failure and segmentation faults when using `qemu-x86_64-static` on a `ppc64el` host to chroot into an AMD64 environment. The problem arises from compatibility issues between the host architecture and the emulated environment, specifically related to how the threading library (`libpthread`) handles thread IDs in different architectures. + +The error message indicates that there's an assertion failure in `__libc_fork`, which is part of the C library's threading implementation. This suggests a low-level problem with how system calls or libraries are being emulated or translated across architectures, rather than an issue with specific instructions or general runtime behavior. + +Therefore, this is best categorized under **syscall**, as it relates to errors in system call handling or emulation across different architectures. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1603734 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1603734 new file mode 100644 index 00000000..de18672a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1603734 @@ -0,0 +1,3 @@ +The issue occurs during runtime execution when using QEMU's floatx80_sqrt function, leading to an infinite loop and high CPU usage. This falls under runtime-related errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1614348 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1614348 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1614348 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1623020 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1623020 new file mode 100644 index 00000000..7f9f7fc8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1623020 @@ -0,0 +1,5 @@ +The issue arises from running an amd64 binary on an ARM7 host using QEMU. The program crashes due to panic messages related to the Go runtime, such as "panic before malloc heap initialized" and "gentraceback before goexitPC initialization." These errors indicate problems with how QEMU handles system calls required by the Go runtime for initialization. + +The stack traces and panics suggest that the issue is not with specific instructions or a particular syscall but rather with how the runtime environment is set up. Therefore, this falls under the **runtime** category as it pertains to the execution environment and runtime initialization issues within QEMU when emulating an amd64 binary on an ARM7 host. + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1641861 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1641861 new file mode 100644 index 00000000..a916cf40 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1641861 @@ -0,0 +1,3 @@ +The issue lies within how QEMU emulates the FPSCR register, specifically allowing writes to bits that should be reserved as zero according to the ARM manual. This is an emulation error related to instruction handling. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1648 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1648 new file mode 100644 index 00000000..25705bed --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1648 @@ -0,0 +1,4 @@ +The issue described relates to incorrect alignment of structures used during signal handling, specifically within QEMU's `signal.c` file for x86_64 targets. This misalignment leads to segmentation faults due to improper memory access during runtime. + +**Answer:** +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1654137 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1654137 new file mode 100644 index 00000000..c419a26e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1654137 @@ -0,0 +1,5 @@ +The user reports that after upgrading from QEMU 2.7.0 to 2.8.0, the Ctrl-A B command (used to send a break signal to the VM) no longer works on their NetBSD amd64 system. Other Ctrl-A sequences are functioning correctly, and reverting to the previous version resolves the issue. This indicates that the problem is specific to the new version and likely related to how QEMU handles runtime inputs or commands. + +Given that this is an issue occurring during runtime when using a specific command, it falls under the **runtime** category rather than being related to faulty instructions or system calls. + +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1659901 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1659901 new file mode 100644 index 00000000..fc2023e0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1659901 @@ -0,0 +1,3 @@ +The issue arises during runtime execution, as the crash occurs when running Java inside a chroot using qemu-user-static. The problem is not tied to specific instructions or syscalls but rather to the behavior observed while executing within this environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1661815 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1661815 new file mode 100644 index 00000000..1ac4c6fe --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1661815 @@ -0,0 +1,3 @@ +The issue pertains to an undefined behavior caused by returning a stack address through an output parameter. This leads to potential vulnerabilities as it can allow exploitation when the pointer is used after the function returns. The problem occurs at runtime due to improper handling of variable storage durations, leading to undefined behavior. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1667401 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1667401 new file mode 100644 index 00000000..1d3b82d3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1667401 @@ -0,0 +1,3 @@ +The issue arises due to an assertion failure related to `tb_lock` when using pthreads in QEMU for PowerPC. The problem occurs specifically during thread creation and joining, leading to a segmentation fault. This points to issues within the runtime environment rather than a specific instruction or syscall. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1671 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1671 new file mode 100644 index 00000000..bb6abf4b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1671 @@ -0,0 +1,3 @@ +The issue arises from a segmentation fault during runtime when executing a specific binary (`testb3`) using `qemu-riscv64`. The stack trace shows various threads encountering segfaults while handling syscalls and signals, indicating problems during execution rather than issues with specific instructions or system calls themselves. This points to a general runtime error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1697 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1697 new file mode 100644 index 00000000..b63de4ad --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1697 @@ -0,0 +1,3 @@ +The bug report mentions an assertion failure related to page_set_flags, specifically that `last <= GUEST_ADDR_MAX` failed. This indicates an issue during runtime execution when QEMU attempts to set flags on memory pages beyond the maximum allowed guest address. The problem is not directly tied to a specific instruction or system call but rather to memory management and address handling during emulation. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1704638 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1704638 new file mode 100644 index 00000000..f13b1a26 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1704638 @@ -0,0 +1,3 @@ +The issue described involves a program hanging when run under QEMU for MIPS and MIPS64 architectures due to weak symbol access. This leads to deadlocks in mutex locking within the Translation Block (TB) generation process. The stack trace points to issues in runtime operations related to thread management, mutex locks, and signal handling. + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1715162 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1715162 new file mode 100644 index 00000000..96e44e46 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1715162 @@ -0,0 +1,3 @@ +The issue involves QEMU crashing when writing a core dump after a segmentation fault occurs while running a binary under `qemu-x86-64`. The backtrace shows that the crash happens during `sigsuspend` in the context of handling signals and dumping cores, which suggests it's related to how QEMU manages runtime exceptions and signal handling. + +Category: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1724485 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1724485 new file mode 100644 index 00000000..59459c3d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1724485 @@ -0,0 +1,3 @@ +The issue arises during runtime when an invalid assertion is triggered in `arm_read_memory_func`, leading to a stall in QEMU execution. This is categorized under **runtime** errors because it occurs dynamically while the program is executing, specifically due to an unexpected condition in memory reading functionality. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1735384 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1735384 new file mode 100644 index 00000000..911daea8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1735384 @@ -0,0 +1,15 @@ +The bug report describes an issue where the OpenJDK JVM crashes due to a segmentation fault when running on `qemu-sh4`. This indicates a problem during the execution of the program, specifically related to memory access or improper handling within the runtime environment. + +**Step-by-step explanation:** + +1. **Identify the Error:** The error is a segmentation fault (`signal 11`), which typically occurs due to invalid memory access. +2. **Context:** It happens when running Java on `qemu-sh4`, indicating that the issue might be related to how QEMU emulates certain instructions or handles system calls for the SH4 architecture. +3. **Possible Causes:** + - A specific instruction causing an invalid memory access. + - An error in handling a system call within QEMU's emulation layer. + - A general runtime issue, such as incorrect memory management or improper emulation of CPU operations. + +4. **Categorization:** Since the problem occurs during program execution and is related to memory access (segmentation fault), it falls under "runtime" issues rather than being specifically tied to a faulty instruction or a system call error. + +**Answer:** +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1736 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1736 new file mode 100644 index 00000000..eec99847 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1736 @@ -0,0 +1,3 @@ +The issue described pertains to an error in debug output where the guest address is incorrectly displayed as a page offset instead of the full virtual address. This indicates a problem with how addresses are handled or logged during runtime, rather than a fault in specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1737444 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1737444 new file mode 100644 index 00000000..03331b9f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1737444 @@ -0,0 +1,15 @@ +The issue involves a crash when running a specific test program on qemu-sh4 but works correctly on actual hardware (Renesas SH7785LCR). The problem occurs during the execution of the `setcontext` function within the `libgo` configure script, which is part of the Go frontend for GCC. + +Analyzing the provided information: +- The crash happens with an "Unhandled trap" error, indicating an unexpected exception or invalid instruction. +- The program uses functions like `getcontext`, `makecontext`, and `setcontext`, which are related to context switching and thread management. +- The issue is reproducible in the qemu-sh4 environment but not on physical hardware, suggesting a possible emulation bug in qemu. + +Given that the crash occurs during context switching and involves thread operations, it falls under runtime issues rather than being directly tied to specific instructions or syscalls. Therefore, the category for this bug report is: + +**runtime** + +However, if further analysis shows that the issue stems from incorrect handling of certain instructions by qemu, the category could be adjusted accordingly. + +**Final Answer** +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1740219 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1740219 new file mode 100644 index 00000000..df91fbc5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1740219 @@ -0,0 +1,3 @@ +The issue revolves around increased startup time due to issues within the `init_guest_space` function in the ARM emulation code when using a static build. The problem is related to how memory is being mapped and allocated during runtime, specifically with the `mmap` system calls and address space management. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1741 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1741 new file mode 100644 index 00000000..cb38929d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1741 @@ -0,0 +1,3 @@ +The given bug report mentions a specific commit hash and describes an issue where it breaks some 32-bit architectures under Linux-user on AMD64. This indicates that there's a problem during runtime when executing instructions for these architectures. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1748612 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1748612 new file mode 100644 index 00000000..57264fc3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1748612 @@ -0,0 +1,3 @@ +The issue arises from incorrect logging functions being used (`gemu_log` instead of `qemu_log`) and the `-D` option not properly redirecting the strace output to a file. This relates to how the program handles runtime logging and output redirection. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1755 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1755 new file mode 100644 index 00000000..95090585 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1755 @@ -0,0 +1,3 @@ +The issue arises during the execution of a binary compiled for ARM Cortex-M3 using qemu-arm in linux-user mode. The error message indicates an assertion failure related to memory address limits. This points to a problem occurring at runtime when QEMU tries to set page flags, which is unrelated to specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756519 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756519 new file mode 100644 index 00000000..d1d2a486 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756519 @@ -0,0 +1,3 @@ +The issue arises during the execution of a multi-threaded test case when using qemu's linux-user mode for RISC-V64. The crash occurs in QOM (QEMU Object Model) path canonicalization during a `do_fork()` call that invokes `cpu_create`. This suggests a problem related to object lifecycle management or property setting in QOM, which is part of the runtime environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756807 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756807 new file mode 100644 index 00000000..8b648269 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1756807 @@ -0,0 +1,3 @@ +The issue described involves a significant performance regression when using `qemu-user` and `proot` on Ubuntu 18.04 compared to Ubuntu 16.04. The problem manifests during runtime operations, such as executing a command that takes measurably longer in the newer environment. This suggests that the slowdown is related to how these tools interact during execution rather than issues with specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1761535 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1761535 new file mode 100644 index 00000000..059d45e6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1761535 @@ -0,0 +1,5 @@ +The issue arises when running an ARM64 Java image on an x86 machine using QEMU. The problem occurs specifically with a newer version of QEMU (2.11.91), where executing `javac` results in a segmentation fault and a core dump, causing the terminal to hang. This behavior doesn't occur with older versions like 2.5.0 or 2.11.1. + +The core dump indicates that there's an unexpected crash happening within QEMU when it tries to emulate certain instructions for ARM64. This suggests that the issue is related to how QEMU handles specific ARM64 instructions, which might not be correctly translated or executed on the x86 host. Therefore, this falls under an **instruction** category bug in QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763 new file mode 100644 index 00000000..80ed6308 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763 @@ -0,0 +1,3 @@ +The issue arises when running `ldd` within a Docker container that's using QEMU user emulation to run an ARM64 binary on an AMD64 host. The error message indicates that `ldd` exits with code 139, which typically signifies a segmentation fault. This suggests that there's an issue with how the binary is being executed or how the dynamic linker is handling it, pointing towards a problem in the QEMU runtime environment rather than a specific instruction or syscall. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763536 new file mode 100644 index 00000000..6fb03afc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1763536 @@ -0,0 +1,3 @@ +The issue occurs when using multi-threaded Go commands under QEMU user emulation for ppc64le and arm64 architectures, leading to hangs, segfaults, or other runtime errors. This points to problems during runtime execution, particularly with how QEMU handles multi-threading in the emulated environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1765970 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1765970 new file mode 100644 index 00000000..5dc7780e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1765970 @@ -0,0 +1,5 @@ +The bug report describes a segmentation fault occurring in `qemu-arm` when running under `uclibc-ng`, specifically after an upgrade to QEMU 2.11.x. The issue is tied to a particular commit that changes `MAX_RESERVED_VA`. The backtrace provided shows the crash happening within CPU execution logic, particularly during code generation and execution of translated blocks. + +This points to an error in how QEMU handles instructions or generated code at runtime, rather than being directly related to system calls. Therefore, it falls under the **instruction** category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768 new file mode 100644 index 00000000..db09d351 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768 @@ -0,0 +1,3 @@ +The issue relates to a problem in how memory allocation is handled at runtime within QEMU's user mode emulation, specifically involving incorrect type usage that affects the ability to allocate more than 2GB on certain platforms. This falls under **runtime** errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768246 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768246 new file mode 100644 index 00000000..d6a93894 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1768246 @@ -0,0 +1,3 @@ +The issue arises during runtime when executing Java on QEMU's sh4 architecture. The crash occurs due to an assertion failure in `cpu_loop_exec_tb`, indicating a problem related to instruction execution or timing within QEMU itself. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1773743 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1773743 new file mode 100644 index 00000000..5fad11df --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1773743 @@ -0,0 +1,3 @@ +The bug report describes a segmentation fault occurring when using `qemu-user` with specific environment variables and running under GDB. The issue seems to relate to how signals are handled, particularly `sigprof`, which is ignored in a patch to bypass the problem. + +Classification: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1774149 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1774149 new file mode 100644 index 00000000..e80b0cf9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1774149 @@ -0,0 +1,3 @@ +The issues reported involve problems while debugging using QEMU's GDB server. The first issue relates to accessing registers, and the second involves memory access during function calls from GDB. These are related to how QEMU handles runtime operations during remote debugging sessions. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1793539 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1793539 new file mode 100644 index 00000000..50e6dd58 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1793539 @@ -0,0 +1,3 @@ +The error message indicates that QEMU received signals outside of the vCPU context during the execution of gedit for RISC-V. This suggests an issue related to how signals are being handled within the CPU environment, which falls under runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1798 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1798 new file mode 100644 index 00000000..3746cba0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1798 @@ -0,0 +1,7 @@ +The user's query involves classifying a bug report from QEMU into one of three categories: instruction, syscall, or runtime. They've provided an example where they converted malloc/calloc/free to g_malloc/g_new/g_free and the correct classification was 'runtime'. + +In this case, I need to determine if the current situation fits into any of these categories. The bug report seems to relate to memory management functions in QEMU, which are typically handled during runtime rather than being specific to instructions or system calls. + +So, considering that memory allocation issues like those involving g_malloc and g_free occur at runtime, the appropriate classification is 'runtime'. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1799200 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1799200 new file mode 100644 index 00000000..8fbc1986 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1799200 @@ -0,0 +1,3 @@ +The bug occurs during runtime due to a null pointer dereference when emitting an operation in TCG (Tiny Code Generator). This happens while executing custom helper functions inserted into QEMU's instruction translation process, specifically within `i386_tr_insn_start`. The crash occurs sporadically, indicating it's dependent on specific conditions encountered during execution. Therefore, the issue falls under **runtime** errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1805 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1805 new file mode 100644 index 00000000..1f8867b7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1805 @@ -0,0 +1,5 @@ +The issue describes a problem where the CI job `build-user-hexagon` is not correctly testing the Hexagon target due to toolchain misconfiguration. The root cause is that the compiler used (`cc`) resolves to a native x86_64 GCC instead of the intended Hexagon cross-compiler (`clang`). This results in the build process compiling for the wrong architecture, leading to failed tests and incorrect behavior. + +The problem arises during runtime when the build system (Meson) attempts to execute binaries compiled with the wrong toolchain. This is a **runtime** issue because it pertains to how the application behaves when built with an incorrect configuration, affecting its execution environment. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1808565 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1808565 new file mode 100644 index 00000000..1d141afc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1808565 @@ -0,0 +1,5 @@ +The bug report discusses an issue related to how QEMU handles remapping certain /proc files for multithreaded programs, specifically /proc/self/task/<pid>/maps and /proc/<pid>/task/<pid>/maps. The problem arises during runtime when these specific maps are not being correctly remapped, which can cause issues in capturing the necessary information without freezing the entire program. + +This issue is not about a faulty instruction or an error with a syscall but rather a problem that occurs during the execution of QEMU. Therefore, it falls under the category of runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1809546 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1809546 new file mode 100644 index 00000000..61a14cf1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1809546 @@ -0,0 +1,3 @@ +The issue arises from how QEMU's PL011 UART implementation handles byte writes to specific SFR (Special Function Register) offsets. When writing a byte, it incorrectly modifies the entire register instead of just the targeted byte. This problem occurs in runtime when executing certain operations without compiler optimizations. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1812 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1812 new file mode 100644 index 00000000..88736181 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1812 @@ -0,0 +1,3 @@ +The issue arises from older programs segfaulting under qemu-aarch64 due to changes introduced by commit 59b6b42cd3446862567637f3a7ab31d69c9bef51 in QEMU's AArch64 emulation, which seems to affect how the emulator handles certain CPU features or instructions. This points towards a problem with the runtime environment setup by qemu-aarch64. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1813398 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1813398 new file mode 100644 index 00000000..7c147c9a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1813398 @@ -0,0 +1,9 @@ +The bug report describes a situation where `qemu` hangs due to calling `malloc` after `fork` in a multi-threaded process on a `musl`-based system. This is identified as undefined behavior because, according to POSIX standards, only async-signal-safe functions should be called in the child process immediately after `fork`. The issue arises from concurrent modifications to the malloc state by multiple threads during `fork`, which corrupts memory management. + +The problem lies in the interaction between threading (`pthread_atfork` handlers) and memory allocation (`malloc`) during a `fork` operation, which is inherently not async-signal-safe. This is a runtime error because it occurs dynamically during execution rather than being a direct instruction or syscall misuse. + +**Answer: runtime** + +The bug report discusses an issue that occurs during the execution of the program, specifically related to how memory management and threading interact after a fork operation. It does not point to a specific faulty instruction but rather describes a general runtime behavior that leads to undefined behavior according to POSIX standards. Therefore, it falls under the "runtime" category. + +Answer: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1814128 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1814128 new file mode 100644 index 00000000..14faf9e8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1814128 @@ -0,0 +1,3 @@ +The issue involves `qemu-user` failing to set up a reasonable `brk` for static-PIE binaries, leading to crashes during early TLS setup due to insufficient space for the `brk` region. This is a runtime error because it occurs during the execution of the program when the system attempts to allocate memory dynamically. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1818483 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1818483 new file mode 100644 index 00000000..16a6932e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1818483 @@ -0,0 +1,5 @@ +The issue arises from how `qemu-user` handles command-line arguments when interacting with `binfmt_misc`. Specifically, when `binfmt_misc` is configured with certain flags (like "P"), it changes the way arguments are passed to `qemu`, leading to unexpected behavior in parsing these arguments. This affects runtime execution within a chroot environment. + +The problem is not related to faulty instructions or syscalls but rather to how arguments are processed at runtime, making this a **runtime** issue. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1819 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1819 new file mode 100644 index 00000000..9f1574cf --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1819 @@ -0,0 +1,3 @@ +The issue arises because the CentOS 7 image for ARM (linux/arm/v7) is being run on an AMD64 host without proper emulation support, leading to a segmentation fault when executing `rpm -qa`. This indicates that the problem is related to the runtime environment's inability to handle the mismatched architecture properly. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832353 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832353 new file mode 100644 index 00000000..4c9c98cf --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832353 @@ -0,0 +1,3 @@ +The assertion failure `cpu_exec: Assertion !have_mmap_lock() failed` indicates an issue related to memory management during execution, specifically involving mmap locks and CPU state handling. This falls under **runtime** errors as it pertains to the execution environment and resource management within QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832916 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832916 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1832916 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1833668 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1833668 new file mode 100644 index 00000000..4c6c6dae --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1833668 @@ -0,0 +1,5 @@ +The bug report indicates that the user is trying to run an ARM 32-bit binary on an AArch64 system using `qemu-aarch64`, but it fails with an "Invalid ELF image for this architecture" error. The issue arises because the `arm_cpus` array in QEMU is empty, which means there are no defined CPU models for 32-bit ARM architectures when running under AArch64. This prevents the emulation of a compatible ARM CPU (like Cortex-A7), which is necessary to execute 32-bit ARM binaries. + +The problem occurs during runtime because the system cannot properly emulate the required architecture to run the binary. It's not an issue with specific instructions or syscalls but rather with the setup and configuration of the QEMU environment for handling different architectures. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1834496 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1834496 new file mode 100644 index 00000000..f467beff --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1834496 @@ -0,0 +1,3 @@ +The issue describes that running GCC tests causes QEMU to crash with an "Aborted" signal (signal 6), leading to a core dump. This indicates a problem during the execution or runtime environment rather than specific issues with instructions or syscalls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835693 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835693 new file mode 100644 index 00000000..39d3ea73 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835693 @@ -0,0 +1,3 @@ +The issue arises when running a s390x binary compiled on an amd64 host using `qemu-s390x-static`, resulting in a segmentation fault. This suggests a problem during execution rather than a specific instruction or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835839 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835839 new file mode 100644 index 00000000..ac193624 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1835839 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect reporting of the shell variable `$0` by `qemu-user`, specifically always returning an absolute path instead of the expected relative or command name. This behavior affects how scripts and commands interpret their own invocation, which is a runtime execution aspect rather than a problem with specific instructions or system calls. + +Answer: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836078 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836078 new file mode 100644 index 00000000..aa31ac0b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836078 @@ -0,0 +1,3 @@ +The issue involves regressions occurring when running GCC tests on the ARM target using QEMU. The problem arises during runtime, specifically when executing the tests, leading to crashes that did not occur previously. This suggests it's related to how QEMU handles execution environments or specific instructions rather than a particular system call error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836192 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836192 new file mode 100644 index 00000000..e176359e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836192 @@ -0,0 +1,3 @@ +The bug report mentions regressions when running GCC tests on QEMU's ARM926 target after a specific commit. The issues are related to the behavior of the ARM10tdmi CPU configuration and include problems with binaries and shared libraries, which suggests they occur during runtime. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836558 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836558 new file mode 100644 index 00000000..05ce003e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1836558 @@ -0,0 +1,10 @@ +The issue involves memory leaks occurring specifically when running C++ code that creates threads on QEMU's PowerPC emulator. The problem doesn't manifest on native Intel hardware or real PowerPC CPUs, suggesting it's related to how QEMU handles thread creation and memory management in its emulation environment. + +The key points are: +1. **Memory Leaks**: The program consumes increasing memory only under QEMU-PPC. +2. **Environment Specificity**: No leaks occur on real Intel or PowerPC hardware. +3. **Compiler and OS Consistency**: The issue persists across different compilers and Debian versions, pointing to a deeper systemic problem rather than a specific version flaw. + +This behavior indicates that the problem lies in how QEMU's runtime environment manages resources like threads and memory during emulation. It’s not an instruction-level fault or a syscall error but rather a broader runtime issue within QEMU. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1840922 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1840922 new file mode 100644 index 00000000..41918b98 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1840922 @@ -0,0 +1,3 @@ +The issue arises from an unhandled CPU exception during runtime when using QEMU to emulate a Cortex-M33 processor. This points to a problem occurring while executing instructions, not related to system calls or other general runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1854 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1854 new file mode 100644 index 00000000..2b9903b8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1854 @@ -0,0 +1,3 @@ +The issue arises from an unexpected code path being reached in `elfload.c`, specifically within the `zero_bss` function. This indicates a problem during the execution phase of the QEMU user-mode emulation for s390x, which is not directly related to a specific instruction or system call error but rather to an internal runtime inconsistency. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1857 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1857 new file mode 100644 index 00000000..cbbb1a55 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1857 @@ -0,0 +1,3 @@ +The slowdown occurs during the execution of QEMU when the FEAT_LSE2 feature is enabled for the ARM CPU. This suggests that the issue is related to how instructions are being handled at runtime, particularly those involving LSE (Lightweight SIMD Extensions) instructions. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1860610 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1860610 new file mode 100644 index 00000000..9c694245 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1860610 @@ -0,0 +1,3 @@ +The bug report mentions a memory leak in the `cap_disas_plugin` function and refers to the proper use of Capstone's ABI, specifically calling `cs_free(insn, count);` before `cs_close`. This indicates an issue related to runtime errors, as it involves memory management during execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1861605 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1861605 new file mode 100644 index 00000000..f1b68332 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1861605 @@ -0,0 +1,3 @@ +The issue describes a problem related to how QEMU handles LL/SC instructions on MIPS after a specific commit, leading to a failure in the CMPXCHG operation due to sign-extension changes. This falls under an **instruction** category because it involves incorrect behavior in generating or handling specific CPU instructions (LL/SC and CMPXCHG). + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862167 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862167 new file mode 100644 index 00000000..992bc2e7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862167 @@ -0,0 +1,7 @@ +The user is encountering an issue where their assembler program, designed for a CPU with 512-bit SVE registers, causes a segmentation fault when run using `qemu-user-aarch64`. This happens because QEMU currently only supports the maximum SVE register size of 2048 bits. The problem arises during runtime execution of load/store instructions, which are not compatible with their target system's register size. + +The issue is related to how QEMU handles different SVE register sizes during execution. It doesn't fit under "instruction" since it's about QEMU's handling of the instruction, not a faulty instruction itself. Similarly, it's not directly a syscall error but rather an incompatibility in runtime behavior due to unsupported configuration options. + +Therefore, this falls under **runtime** issues. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862986 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862986 new file mode 100644 index 00000000..9194643c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1862986 @@ -0,0 +1,3 @@ +The bug report involves a segmentation fault when running `qemu-s390x` on an ARM64 system, indicating an issue during execution that likely stems from incorrect memory access or improper handling within QEMU's code generation or CPU emulation routines. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1863445 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1863445 new file mode 100644 index 00000000..9090fb13 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1863445 @@ -0,0 +1,3 @@ +The assertion failure in `translate-all.c` indicates an issue during the translation of code at runtime. This does not pertain to a specific instruction or system call but is a general error occurring while executing the binary under QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1869073 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1869073 new file mode 100644 index 00000000..87761a72 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1869073 @@ -0,0 +1,3 @@ +The issue occurs during runtime when executing `git clone -s` under `qemu-arm-static`, indicating a problem that manifests while the program is running. This points to a runtime error rather than an instruction or syscall issue. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1878501 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1878501 new file mode 100644 index 00000000..bbf22187 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1878501 @@ -0,0 +1,3 @@ +The issue arises because `qemu-i386` does not define the `AT_SYSINFO` auxval when running i386 Linux binaries, leading to a segmentation fault due to an invalid function pointer being called. This problem occurs at runtime when executing specific binaries compiled against certain versions of Bionic libc. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880225 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880225 new file mode 100644 index 00000000..e11abf5b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880225 @@ -0,0 +1,13 @@ +The issue arises during the emulation of an ARM program using QEMU, specifically when running a cross-compiled binary. The problem occurs in newer versions of QEMU (from around May 15th onward) but not in version 5.0.0. The error message indicates an assertion failure related to `have_guest_base` in the file `elfload.c`. This suggests that there is a problem during the process of loading or executing the guest binary, which points to issues in how QEMU handles the execution environment for ARM binaries. + +The key steps leading to the bug include: + +1. **Program Compilation**: The program is compiled using an ARM cross-compiler. +2. **Emulation Failure**: Running the compiled program with QEMU results in an assertion failure related to `have_guest_base`. +3. **Version Specificity**: The issue is present in newer versions of QEMU but not in version 5.0.0, indicating a regression. + +The error message specifically mentions `probe_guest_base` and the failed assertion `have_guest_base`. This implies that during the process of setting up the guest environment (in this case, an ARM binary), QEMU encounters an unexpected condition where it cannot determine or set the base address for the guest program correctly. This is a critical part of the emulation process, as it relates to how the emulator maps and executes the guest instructions. + +The failure occurs at runtime when QEMU attempts to load and execute the ARM binary. Therefore, this issue falls under the category of **runtime** errors, as it pertains to the execution environment and not directly to a specific instruction or system call. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880332 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880332 new file mode 100644 index 00000000..ab189f23 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880332 @@ -0,0 +1,3 @@ +The issue involves a segmentation fault occurring under specific conditions when using QEMU 5.0.0 for user emulation with a cURL binary on an aarch64 architecture, particularly when connecting to a server using TLS 1.2 and ECDHE-ECDSA-CHACHA20-POLY1305 cipher. The presence of a Dockerfile that reproduces the crash and strace outputs with and without a specific commit reverted suggests it's related to runtime behavior rather than a syscall or faulty instruction. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880722 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880722 new file mode 100644 index 00000000..1e6cf2ca --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1880722 @@ -0,0 +1,11 @@ +The bug report discusses issues related to checking page crossings in the `use_goto_tb()` function across different targets in QEMU. It mentions that some targets like "hppa" have implemented fixes, while others haven't. The workaround involves adding checks for both user and system modes. Additionally, it suggests fixing `linux-user/mmap.c` to handle invalidations properly, which could lead to performance improvements. + +The possible categories are: + +1. **instruction**: This would apply if the issue was directly related to a faulty CPU instruction or emulation of instructions. +2. **syscall**: This would be relevant if the problem involved errors in system calls or their handling. +3. **runtime**: This category covers other runtime issues, such as memory management, page table handling, or performance problems not tied to specific instructions or syscalls. + +Given that the bug pertains to page crossing checks and memory management in `use_goto_tb()` and `mmap.c`, it falls under runtime issues rather than being specifically about an instruction or a syscall. The focus is on how QEMU manages memory and handles translations, which are runtime aspects. + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1881450 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1881450 new file mode 100644 index 00000000..2b8c5187 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1881450 @@ -0,0 +1,7 @@ +The bug report describes an "Illegal instruction" error when running a math function under QEMU for m68k Linux user mode. This indicates that the emulation is encountering an invalid or unsupported instruction specific to the m68k architecture. + +The issue relates to how QEMU handles instructions, particularly in the context of floating-point operations, which are likely involved in the math functions being emulated. + +This falls under the category of **instruction** issues within QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1883268 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1883268 new file mode 100644 index 00000000..07aca326 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1883268 @@ -0,0 +1,3 @@ +The issue involves random failures when executing a specific test case related to the `__aarch64_cas8_acq_rel` function in QEMU 5.0 on AArch64 architecture. The problem occurs during runtime execution, particularly with a compare-and-swap instruction causing unexpected behavior. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888303 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888303 new file mode 100644 index 00000000..081ef785 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888303 @@ -0,0 +1,3 @@ +The issue described involves intermittent segfaults when using a statically linked QEMU for x86-64 user mode emulation on an aarch64 system. The problem seems to relate to memory management or alignment, which is a runtime issue rather than a specific instruction fault or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888728 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888728 new file mode 100644 index 00000000..89c0741c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1888728 @@ -0,0 +1,3 @@ +The issue occurs during runtime when attempting to use chroot without additional bind mounts, leading to an assertion failure in `pgb_reserved_va`. This is related to how QEMU handles the guest's virtual address space at runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1889411 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1889411 new file mode 100644 index 00000000..435739f2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1889411 @@ -0,0 +1,3 @@ +The issue describes a problem where GDB cannot unwind the stack when certain signals (like SIGABRT) are triggered while debugging a RISC-V program using QEMU. This appears to be related to how QEMU handles signal delivery and stack unwinding during runtime, rather than a specific instruction or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1890 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1890 new file mode 100644 index 00000000..1f57f195 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1890 @@ -0,0 +1,3 @@ +The issue arises during runtime when attempting to execute the binary using QEMU, specifically related to mapping the file, which falls under the "runtime" category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1894029 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1894029 new file mode 100644 index 00000000..8d7bcff1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1894029 @@ -0,0 +1,5 @@ +The issue described relates to how memory (malloc) is being handled at runtime within QEMU when running on a 64-bit machine. The test program shows that while the application requests allocations of 4 bytes, the pointers returned by malloc are only increasing by 2 bytes each time. This discrepancy suggests an error in the way memory allocation is managed or translated in the QEMU environment for i386 (32-bit) code running on a 64-bit host. + +Given that this behavior occurs during the execution of the program and relates to memory management, which is part of the runtime environment, the appropriate category would be: + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895080 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895080 new file mode 100644 index 00000000..3a41410a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895080 @@ -0,0 +1,3 @@ +The issue arises during runtime when an assertion fails due to `addr` not matching `test`, indicating a problem with memory mapping or address allocation. This points to a runtime error rather than an instruction or syscall issue. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895305 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895305 new file mode 100644 index 00000000..cc1efffd --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895305 @@ -0,0 +1,3 @@ +The issue arises from how QEMU interacts with `pthread_cancel` when built against musl libc, leading to crashes or unexpected signals during execution. This points to a problem occurring at runtime rather than a specific instruction or syscall error. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895703 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895703 new file mode 100644 index 00000000..b400947e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1895703 @@ -0,0 +1,3 @@ +The bug report discusses performance degradation after switching to Meson, specifically in TCG targets. This relates to runtime behavior rather than specific instructions or syscalls. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1904259 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1904259 new file mode 100644 index 00000000..64cdf18a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1904259 @@ -0,0 +1,3 @@ +The issue arises from misaligned atomic operations in the code, specifically within the `qemu/atomic.h` file. Atomic operations are being performed on pointers that may not be properly aligned, leading to performance penalties and build errors. This is related to low-level programming details about how memory accesses are handled, which falls under the category of **instruction** because it involves incorrect or problematic use of specific instructions in the code. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1906536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1906536 new file mode 100644 index 00000000..bb6dab68 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1906536 @@ -0,0 +1,3 @@ +The issue revolves around the `sve-max-vq` option in QEMU, which affects how vector lengths are set for ARM's Scalable Vector Extension (SVE). This is related to runtime behavior since it deals with how QEMU emulates or sets hardware features during execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1907817 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1907817 new file mode 100644 index 00000000..f81a5800 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1907817 @@ -0,0 +1,3 @@ +The provided bug report describes an assertion failure occurring at runtime when using QEMU's ARM64 target after updating to version 5.2. The error is related to checks within the TCG (Tiny Code Generator) component, specifically in the `check_size_align` function. This indicates a problem with how sizes and alignments are handled during code generation or translation, which falls under runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1908551 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1908551 new file mode 100644 index 00000000..31bfe79c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1908551 @@ -0,0 +1,7 @@ +The issue appears to be related to how QEMU emulates SVE (Scalable Vector Extension) instructions for ARM64 when running certain optimized string functions like `strnlen` and `strrchr`. The problem manifests in runtime behavior where incorrect lengths are returned, but only under specific emulation conditions. This suggests a potential bug in the emulation layer rather than the underlying instruction set or system calls. + +The fact that the test passes with `sve-max-vq=2` indicates that the vector length configuration affects the outcome, pointing towards an issue within QEMU's handling of SVE instructions during runtime execution. + +Therefore, this is best classified as a **runtime** error, as it relates to how QEMU executes and emulates code at runtime rather than being an issue with specific instructions or system calls themselves. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1909921 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1909921 new file mode 100644 index 00000000..e80cd617 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1909921 @@ -0,0 +1,3 @@ +The error message indicates that a signal was received outside of the vCPU context during runtime execution. This suggests an issue related to how QEMU is handling CPU signals while running the virtual machine environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913 new file mode 100644 index 00000000..18692ca7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913 @@ -0,0 +1,10 @@ +The issue arises when running `qemu-aarch64-static` to execute `ldconfig.real` within an Ubuntu 22.04 arm64 root filesystem after updating from version 8.1.0 to 8.1.1. The problem is that the program crashes with a segmentation fault in the newer version, whereas it worked correctly before the update. This suggests that the error occurs during the execution of the program at runtime rather than being related to specific instructions or system calls. + +The key points are: +1. The crash happens after an upgrade, indicating a possible regression introduced in version 8.1.1. +2. The crash is a segmentation fault, which typically occurs due to memory access issues or incorrect pointer handling during execution. +3. The problem isn't tied to a specific instruction or syscall but rather to the general runtime behavior of `qemu-aarch64-static`. + +Given these observations, the most appropriate category for this bug report is **runtime**. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913913 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913913 new file mode 100644 index 00000000..ad4116ab --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1913913 @@ -0,0 +1,3 @@ +The issue revolves around how QEMU handles exceptions when 16-bit Windows programs make DOS calls (e.g., `int 21h`). Specifically, the `sigcontext->trapno` is returning `-1`, which causes WINE to mishandle the exception as an illegal instruction instead of properly patching it for structured exception handling. This points to a problem in how exceptions or signals are managed during runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1914870 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1914870 new file mode 100644 index 00000000..e5cb4622 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1914870 @@ -0,0 +1,5 @@ +The issue arises during the compilation of `libvixl` within QEMU on Debian unstable. The compiler is encountering errors in `/usr/include/string.h`, specifically related to missing binary operators and undeclared types like `size_t`. These errors suggest that there might be missing or incorrect headers being included, or a mismatch in compiler settings. + +The errors point towards a problem with the build environment's header files or compiler configuration. It does not indicate a faulty instruction or an issue with system calls but rather a problem during the compilation process itself, which is part of the runtime environment setup. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1915531 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1915531 new file mode 100644 index 00000000..6abae876 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1915531 @@ -0,0 +1,5 @@ +The issue involves hangs due to glib's memory management not being fork-safe when using multiple threads. The problem arises during allocation through `g_slice`, which has global state that isn't properly synchronized after forking. This results in mutex locks causing child processes to hang. + +The bug is related to the runtime environment, specifically how glib handles memory and thread synchronization post-forking within qemu-user. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1916344 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1916344 new file mode 100644 index 00000000..6c51f747 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1916344 @@ -0,0 +1 @@ +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1917184 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1917184 new file mode 100644 index 00000000..236ace6f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1917184 @@ -0,0 +1,5 @@ +The bug report describes an issue that occurs during the execution of a program using `qemu-i386` and the `vm86()` function. Specifically, when handling an interrupt within `vm86`, if both `cs:ip` (code segment and instruction pointer) and `ss:sp` (stack segment and stack pointer) point to addresses within the same memory page, QEMU's `do_int` function attempts to write to that page without ensuring it is writable. This results in a segmentation fault. + +This issue arises during runtime execution rather than being related to a specific instruction or system call. It involves how QEMU manages memory pages and their permissions when handling interrupts in virtual 8086 mode. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1926202 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1926202 new file mode 100644 index 00000000..7dc9dab0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1926202 @@ -0,0 +1,3 @@ +The issue involves an illegal instruction signal when running a PowerPC binary using qemu-user-static. This suggests an incorrect or unsupported instruction being executed. + +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1930 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1930 new file mode 100644 index 00000000..6add4870 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1930 @@ -0,0 +1,20 @@ +The issue arises when running a QNX-compiled binary using QEMU's `qemu-aarch64` emulator on an x86_64 platform, resulting in a segmentation fault. This indicates a problem during the execution or emulation process. + +**Step-by-step Explanation:** + +1. **Binary Compilation:** The hello-world program is compiled for QNX SDP 7.1.0 using the QNX compiler (`qcc`), targeting the `aarch64le` architecture. + +2. **Direct Execution Attempt:** Running the binary directly fails because the system cannot find `/usr/lib/ldqnx-64.so.2`, which is necessary for running QNX binaries natively on Linux. + +3. **Using QEMU Emulator:** The attempt to emulate the binary with `qemu-aarch64` results in a segmentation fault (`signal 11`). This suggests an issue during runtime execution, possibly due to incorrect handling of system calls or improper emulation of certain instructions required by the QNX binary. + +4. **Runtime Environment Setup:** The `-L` option is used to specify the library path for QEMU, pointing to `/home/vsts/qnx710/target/qnx7/aarch64le`. This should theoretically allow QEMU to find the necessary shared libraries like `ldqnx-64.so.2`. + +5. **Possible Causes:** + - The `qemu-aarch64` emulator might not fully support or correctly emulate certain system calls required by QNX binaries. + - There could be a mismatch in the expected runtime environment between what QEMU provides and what the QNX binary expects. + +6. **Category Classification:** Since the error occurs during execution under QEMU and involves a segmentation fault, it falls under issues related to how the emulator handles instructions or interactions during runtime, rather than specific syscalls or instruction faults. + +**Answer:** +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1936977 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1936977 new file mode 100644 index 00000000..47e13186 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1936977 @@ -0,0 +1,3 @@ +The bug report describes a segmentation fault occurring when using `qemu-arm-static` to run `git clone` in a chroot environment. This indicates an issue that happens during the execution of the program, which falls under runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1952 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1952 new file mode 100644 index 00000000..8b6c31c9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1952 @@ -0,0 +1,3 @@ +The issue arises from QEMU's ELF loader making an incorrect assumption about the relationship between virtual addresses and file offsets in PT_LOAD segments. This leads to a miscalculation when handling certain binaries, causing a segmentation fault. The problem is related to how QEMU processes ELF files during runtime, specifically in its loader logic. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1953 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1953 new file mode 100644 index 00000000..08e38677 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/1953 @@ -0,0 +1,5 @@ +The issue involves a segmentation fault when compiling an Elixir application using QEMU on an x86_64 host for an AArch64 target. The problem points to a known issue with QEMU's handling of certain instructions in JIT (Just-In-Time) mode, particularly affecting ARM64 emulation. + +Given the context provided, this is categorized under **instruction** as it relates to errors in instruction execution within QEMU's emulation layer. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2027 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2027 new file mode 100644 index 00000000..a14dfa1c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2027 @@ -0,0 +1,5 @@ +The bug report provided appears to be related to the Go runtime environment, as indicated by the mention of "Go runtime" and various runtime-related functions and goroutines in the stack traces. There's no specific faulty instruction or syscall error mentioned that would directly point to a particular instruction or system call issue. + +Given this analysis, the appropriate category for this bug report is: + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2035 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2035 new file mode 100644 index 00000000..79510ea3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2035 @@ -0,0 +1,3 @@ +The issue relates to the plugin exit callback not executing as expected when running under QEMU. The problem arises during runtime execution, specifically concerning how callbacks are handled by the plugin system. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2072564 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2072564 new file mode 100644 index 00000000..8660253c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2072564 @@ -0,0 +1,3 @@ +The issue arises during runtime when using `qemu-aarch64-static` to emulate an ARM64 environment on an AMD64 host. The segfault occurs specifically when running `ldconfig.real`, indicating a problem that manifests while executing instructions or interacting with system libraries. This does not point to a specific faulty instruction or a syscall error but rather a general runtime issue within QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2082 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2082 new file mode 100644 index 00000000..3a891c32 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2082 @@ -0,0 +1,3 @@ +The issue arises when running certain x86_64 binaries on an aarch64 host using qemu-x86_64-static from qemu-8.1.3-1.fc39. The error message indicates that qemu is unable to find a suitable guest_base for address mapping, specifically mentioning the ranges 0000000000000000-0000000000000fff and 0000000000400000-00000000004047ef. This suggests a problem with how QEMU handles address mappings during runtime. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2101 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2101 new file mode 100644 index 00000000..5b4f80b9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2101 @@ -0,0 +1,30 @@ +Okay, let's try to figure out what's going on here. The user is using QEMU to run an x86_64 binary (ls) on an AArch64 platform, but they're getting incorrect results when listing the root directory with '-l'. + +First step: They copied /usr/bin/ls and its dependent shared libraries from an x86_64 system to an AArch64 machine. That part seems okay; cross-compiling or copying binaries for different architectures is a common practice. + +Then, they're using qemu-x86_64 with the -L option pointing to the path where the x86_64 libraries are located. The command looks correct on the surface: + +qemu-x86_64 -L /path/to/x86_64/lib/root/dir /path/to/ls / -l + +But when they run this, instead of getting a proper directory listing with details (-l), something's wrong. + +Possible issues to consider: + +1. **Shared Libraries**: Are all the necessary shared libraries correctly copied and accessible? Maybe some dependencies are missing or not properly linked. + +2. **Path Resolution**: Is QEMU correctly resolving the paths for the shared libraries when it runs the ls command? The -L option should handle this, but perhaps there's a misconfiguration. + +3. **Binary Compatibility**: Ensure that the binary is indeed compatible with the target system. Even though they copied from x86_64, maybe some system calls or library versions differ. + +4. **Permissions and Environment**: Check if permissions are correct for the libraries and binaries. Also, environment variables might be affecting QEMU's behavior. + +5. **QEMU Version**: Could be a bug in the specific version of QEMU they're using. Maybe updating to a newer version would resolve it. + +6. **Debugging**: Running with strace or adding verbose flags might provide more insight into what's going wrong during execution. + +Given that the command structure seems correct, the most likely culprit is either a missing library or an incorrect path setup leading QEMU to not properly emulate the environment needed for the x86_64 ls binary. If all dependencies are correctly in place and paths are accurate, it might point towards a bug within QEMU's handling of system calls or library emulation. + +After considering these points, the issue seems related to how QEMU is handling the runtime environment, specifically with shared libraries or path resolution during execution. Therefore, categorizing this under 'runtime' makes sense since it relates to errors occurring when the program runs rather than incorrect instructions or syscall issues. +</think> + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2119 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2119 new file mode 100644 index 00000000..2f383a68 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2119 @@ -0,0 +1,3 @@ +The bug report mentions an issue related to accessing V registers in GDB debugging mode when the single-letter 'V' is enabled. This seems to pertain to how instructions are handled or interpreted during runtime, specifically in the context of debugging within QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2127 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2127 new file mode 100644 index 00000000..7dc95eff --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2127 @@ -0,0 +1,3 @@ +The given bug report indicates an assertion failure where two counters (316636 and 316637) are not equal. This suggests that there's a race condition or synchronization issue, likely related to concurrent access to shared resources in a multithreaded environment. Specifically, it points to a problem with fair mutex handling during runtime execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2156 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2156 new file mode 100644 index 00000000..175f7c53 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2156 @@ -0,0 +1,3 @@ +The bug report mentions a segmentation fault (SIGSEGV) when running QEMU recursively three times. This indicates an access violation during execution, likely due to an invalid memory address being accessed. Therefore, this is related to an error in instruction execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2157 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2157 new file mode 100644 index 00000000..f5826b2f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2157 @@ -0,0 +1,3 @@ +The issue arises because `qemu-i386` cannot satisfy the alignment requirements for 32-bit x86 binaries when run on hosts with larger page sizes (like LoongArch, ppc64le, or arm64). This happens during runtime execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2208 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2208 new file mode 100644 index 00000000..d3193c16 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2208 @@ -0,0 +1,3 @@ +The issue pertains to incorrect register updates during runtime execution when using TCG plugins, specifically related to the `pc` register not updating as expected without the `-one-insn-per-tb` option. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2223 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2223 new file mode 100644 index 00000000..2681fc81 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2223 @@ -0,0 +1,3 @@ +The issue described involves code behavior differences when placing a snippet inside or outside a function, leading to hangs. This points to a problem during execution that isn't due to specific instructions or syscalls but rather how the code behaves at runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2304 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2304 new file mode 100644 index 00000000..1f5e8878 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2304 @@ -0,0 +1,5 @@ +The issue reported pertains to incorrect handling of CPU features, specifically related to SVE and SVE2 capabilities, when using certain command-line options in QEMU. This affects how these features are advertised by `getauxval`, leading to an inconsistent state where disabling one feature doesn't correctly propagate to its dependent features. + +This falls under the category of **runtime** errors because it involves incorrect behavior during the execution or runtime of the emulator, rather than issues with specific instructions or system calls themselves. + +Answer: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2309 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2309 new file mode 100644 index 00000000..c230f69b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2309 @@ -0,0 +1,3 @@ +The issue involves qemu-aarch64 hanging during cargo test after a libc6 upgrade, particularly affecting the runtime environment when using an emulated ARM target. The problem doesn't occur on real hardware and is tied to qemu's interaction with the upgraded library. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2460 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2460 new file mode 100644 index 00000000..1076e25d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2460 @@ -0,0 +1,3 @@ +The issue describes significant performance degradation starting from QEMU version 3 when running CoreMark benchmarks in user-mode emulation (guest x86-64 on host ARM64). This indicates a problem that occurs during the execution or runtime environment rather than specific instruction faults or system calls. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2485 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2485 new file mode 100644 index 00000000..f4dde0e8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2485 @@ -0,0 +1,3 @@ +The issue arises when using `getifaddrs` on specific architectures (like m68k, ppc, s390x) linked with musl libc under QEMU. The problem is not related to incorrect instructions or syscalls but occurs during runtime execution in QEMU's environment. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2486 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2486 new file mode 100644 index 00000000..9a02d966 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2486 @@ -0,0 +1,3 @@ +The issue described pertains to incorrect behavior when toggling CPU extensions via QEMU_CPU settings, specifically involving the 'f' and 'zfinx' extensions. This is related to how QEMU handles CPU properties and their configurations during runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2505 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2505 new file mode 100644 index 00000000..391b9441 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2505 @@ -0,0 +1,3 @@ +The bug report mentions that ELF flags related to CPU selection are being ignored by the interpreter in QEMU. This issue doesn't involve faulty instructions or system calls but pertains to how the emulator handles runtime configurations and processor features during execution. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2525 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2525 new file mode 100644 index 00000000..aba0af0f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2525 @@ -0,0 +1,16 @@ +Okay, so I need to classify this bug report into one of three categories: instruction, syscall, or runtime. The bug is from QEMU and mentions an assertion failure in `page_set_flags` at `accel/tcg/user-exec.c:505`, specifically that `have_mmap_lock()` failed. + +First, let's break down the error message. An assertion failing usually means some condition wasn't met when it was expected to be true. The function `page_set_flags` is where this happens, and the check is for `have_mmap_lock()`. So, this seems related to whether the mmap lock is held when it should be. + +Now, looking at the possible categories: + +1. **Instruction**: This would involve issues with specific CPU instructions or their handling. The error doesn't mention any particular instruction, so maybe not this category. + +2. **Syscall**: This relates to system calls. If the bug was about a syscall not behaving as expected, it might fall here. But `have_mmap_lock` is more about locking mechanisms rather than syscalls themselves. + +3. **Runtime**: This covers other runtime errors, like memory management issues or locks. Since this error is about a lock assertion failing during execution, it seems to fit here because it's related to the program's state during runtime. + +The mention of `have_mmap_lock()` suggests that the code expected the mmap lock to be held but it wasn't. This is likely an issue with how locks are managed at runtime rather than a specific instruction or syscall problem. So, the category should be **runtime**. +</think> + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2569 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2569 new file mode 100644 index 00000000..e685ca73 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2569 @@ -0,0 +1,3 @@ +The issue revolves around missing XML support for register tracking specific to the alpha target, which affects plugin functionality during runtime. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2580 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2580 new file mode 100644 index 00000000..22b0fdc9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2580 @@ -0,0 +1,3 @@ +The issue arises during runtime when running a program compiled for `aarch64_be-linux` using `qemu-aarch64_be`. The error message indicates an unreachable code path in `gdbstub.c`, which suggests a problem in how QEMU handles debugging stubs or system emulation at runtime. This doesn't directly point to an instruction or syscall issue but rather to a general runtime problem within the emulator. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2590 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2590 new file mode 100644 index 00000000..14e00b38 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2590 @@ -0,0 +1,5 @@ +The issue described revolves around GDB's inability to load symbols from dynamically linked shared libraries when connected to a QEMU debug server. This specifically impacts breakpoints in functions like `printf` that are part of these shared libraries. The problem does not occur with native gdbserver, suggesting it's related to how QEMU handles the debugging process. + +This falls under **runtime** because it pertains to the execution environment and how GDB interacts with QEMU during runtime, rather than specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2596 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2596 new file mode 100644 index 00000000..7fd41037 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2596 @@ -0,0 +1,3 @@ +The bug report mentions an issue related to parsing ELF files and endianness problems, specifically pointing out an invalid note in PT_GNU_PROPERTY. This seems to be an error that occurs during runtime when handling system properties or notes within an ELF file. Therefore, it falls under the "runtime" category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2598 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2598 new file mode 100644 index 00000000..b93de46f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2598 @@ -0,0 +1,3 @@ +The given error message relates to an issue occurring during runtime when QEMU is attempting to map guest addresses on a RISC-V host. The problem seems to be with how QEMU handles address translation or memory mapping for the guest operating system. This doesn't directly point to a specific instruction fault or a syscall error but rather to issues arising during the execution of QEMU itself. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2604 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2604 new file mode 100644 index 00000000..9a5dd69e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2604 @@ -0,0 +1,3 @@ +The bug report describes an issue where `qemu-arm-static` crashes when executing NEON code generated by GStreamer's Orc library. The crash occurs consistently in user emulation mode but works fine in system emulation mode. The disassembly shows that the crash happens during a Neon instruction (`vld1.8`), which suggests a problem with how QEMU handles certain instructions or invalidates translations. This points to an issue related to the translation of instructions, specifically Neon instructions, which falls under the category of faulty instructions. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/261 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/261 new file mode 100644 index 00000000..1e51c445 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/261 @@ -0,0 +1,18 @@ +The issue describes a problem related to signal handling, which occurs during runtime, particularly in user-mode emulation for Nios2 in QEMU. + +The appropriate classification is: + +**runtime** + +This categorization fits because it involves an error occurring during the execution or operation of the system, specifically within the emulation environment, rather than being directly tied to a specific instruction fault or a syscall error. + +Step-by-step explanation: +1. **Identify Key Terms**: The bug report mentions "broken signal handling" and "nios2 user-mode emulation." +2. **Understand Context**: Signal handling is a system-level process that occurs during runtime, not at the instruction level. +3. **Match Categories**: + - **Instruction**: Refers to issues with specific CPU instructions, which doesn't apply here. + - **Syscall**: Involves errors in system calls, but signal handling isn't a syscall issue per se. + - **Runtime**: Pertains to errors that occur while the program is executing, which fits this scenario. +4. **Conclusion**: The bug falls under "runtime" issues as it relates to how signals are managed during emulation. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2619 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2619 new file mode 100644 index 00000000..ea6b9152 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2619 @@ -0,0 +1,3 @@ +The issue "INTEGER_OVERFLOW in nios2.c" indicates an overflow occurring during integer operations, which typically happens at runtime when executing instructions or performing calculations. This does not directly relate to a specific syscall error but is instead a general runtime issue. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2628 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2628 new file mode 100644 index 00000000..79acdc2a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2628 @@ -0,0 +1,5 @@ +The bug report describes issues related to crashes and signals (like Segmentation fault) when running `dpkg-deb` within a chroot environment using QEMU for userspace emulation on different architectures (armv7, aarch64, s390). The errors occur during the compression routine of package extraction. + +Given that these crashes happen specifically in the context of userspace emulation and involve core dumps due to signals such as "Aborted" or "Segmentation fault," this points toward issues happening within QEMU's runtime environment rather than specific instructions or system calls. This categorization aligns with runtime errors, which encompass problems that occur during the execution of a program due to internal state, memory management, or other environmental factors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2655 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2655 new file mode 100644 index 00000000..72c67665 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2655 @@ -0,0 +1,3 @@ +The issue revolves around the behavior of a specific function within QEMU's RISC-V vector helper implementation and how it interacts with memory callbacks from plugins. The problem occurs during runtime when executing certain vector instructions, leading to incorrect handling of memory accesses. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2683 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2683 new file mode 100644 index 00000000..24d856d5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2683 @@ -0,0 +1,5 @@ +The issue revolves around `probe_access()` behaving inconsistently between full-system and linux-user modes when the flag is set to `TLB_MMIO`. This affects memory operations and callback injections, leading to differing behaviors such as those observed in RISC-V's `cbo.zero` implementation. + +The problem occurs during runtime execution, specifically related to how memory accesses are handled under different QEMU modes. Therefore, it falls under the **runtime** category. + +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2761 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2761 new file mode 100644 index 00000000..752f7a65 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2761 @@ -0,0 +1,3 @@ +The error message indicates a problem with finding a suitable guest_base for address mapping, which relates to how QEMU handles memory virtualization and address translation during emulation. This falls under issues that occur during the runtime operation of QEMU. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2775 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2775 new file mode 100644 index 00000000..8c8bdaeb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2775 @@ -0,0 +1,3 @@ +The bug report describes an internal assertion failure within QEMU's SPARC64 code generation, specifically pointing to an unreachable code path in `translate.c`. This indicates an issue with how instructions are being translated or generated during runtime, rather than a problem with system calls or specific instructions themselves. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/280 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/280 new file mode 100644 index 00000000..f9e32ca6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/280 @@ -0,0 +1,7 @@ +The user reports that when using `qemu-x86_64` with `schroot` on Debian bullseye, Chrome cannot run and HTML cannot load. This suggests an issue during the execution or runtime environment rather than specific instructions or system calls. + +Runtime issues often involve problems in how programs execute within their environment, such as library compatibility, environment variables, or resource allocation. + +Therefore, this bug falls under the **runtime** category. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2815 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2815 new file mode 100644 index 00000000..218fd832 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2815 @@ -0,0 +1,5 @@ +The bug report mentions that using `clang 17` and newer with the `-fsanitize=function` flag causes QEMU user-mode to crash due to a segmentation fault when calling TCG prologue. This issue occurs during runtime execution, specifically related to function sanitization features affecting the TCG (Tiny Code Generator) component of QEMU. + +Given that this is an error occurring at runtime rather than being directly tied to a specific instruction or system call, it falls under the "runtime" category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2846 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2846 new file mode 100644 index 00000000..a88c3d26 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/2846 @@ -0,0 +1,3 @@ +The bug report mentions that the Linux user hangs when `fd_trans_lock` is held during a fork. This indicates an issue related to how system calls are handled, specifically with locking mechanisms around file descriptors during process creation. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/311 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/311 new file mode 100644 index 00000000..6c51f747 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/311 @@ -0,0 +1 @@ +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/324 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/324 new file mode 100644 index 00000000..069ba6d9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/324 @@ -0,0 +1,3 @@ +The bug report states that Chrome-based apps cannot run under QEMU user mode. This issue relates to how applications behave during execution rather than specific instructions or system calls. Therefore, it falls under runtime errors. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/355 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/355 new file mode 100644 index 00000000..ed17a590 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/355 @@ -0,0 +1,3 @@ +The bug report mentions a possible divide by zero bug in `get_whole_cluster`, which indicates an error occurring during runtime when attempting to perform division by zero. This falls under runtime errors as it relates to an operation that causes an exception or crash while the program is executing. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/385 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/385 new file mode 100644 index 00000000..14b3a3bb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/385 @@ -0,0 +1,3 @@ +The classification of the given bug report as part of qemu would fall under **"runtime"** since it refers to a regression that likely occurs during execution or operation, rather than being specifically tied to an instruction or syscall error. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/419 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/419 new file mode 100644 index 00000000..506d20f6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/419 @@ -0,0 +1,3 @@ +The bug report "bsd-user dumps core for all binaries emulated" indicates that there's an issue occurring during runtime when emulating BSD-user binaries under QEMU. This doesn't specifically mention a faulty instruction or a syscall error but points to a general problem happening while running, so it falls under the **runtime** category. + +Runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/442 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/442 new file mode 100644 index 00000000..17d370ae --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/442 @@ -0,0 +1,11 @@ +The issue describes a crash in Firebird when using `qemu-m68k-user` due to an error with `pthread_mutex_init`. This indicates a problem related to system calls or thread management within QEMU's user-mode emulation, which falls under **syscall** errors. + +However, considering that `pthread_mutex_init` is part of the threading API and might be more about runtime issues rather than a direct syscall failure, it could also fit into the **runtime** category. + +Given the ambiguity, but leaning towards the fact that pthread functions are typically system call wrappers, I would categorize this under: + +syscall + +But if I have to choose based on the provided categories, and considering `pthread_mutex_init` is part of the threading runtime, it might be better categorized as **runtime**. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/447 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/447 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/447 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/562107 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/562107 new file mode 100644 index 00000000..e938390f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/562107 @@ -0,0 +1,12 @@ +Alright, I need to classify this bug report into one of three categories: instruction, syscall, or runtime. Let's break it down. + +The user provided a link about QEmu GDB stub using IPv6 instead of v4. The issue seems related to network communication, specifically addressing (IPv6 vs. IPv4). It mentions that the problem has been reported multiple times and suggests it's an easy fix. + +Looking at the categories: +- Instruction: Faulty CPU instructions or incorrect instruction handling. +- Syscall: Errors in system calls, like invalid parameters or unexpected behavior. +- Runtime: Other errors occurring during execution, not fitting the above two. + +This bug isn't about faulty instructions or syscalls. It's more about how QEmu handles network addressing at runtime, which falls under general runtime issues. + +So, the appropriate category is **runtime**. \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/645662 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/645662 new file mode 100644 index 00000000..f0ea8b3c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/645662 @@ -0,0 +1,3 @@ +The issue arises from QEMU's x87 emulation not providing full 80-bit precision for trigonometric and complex floating-point operations, leading to inaccuracies that cause Python's math tests to fail. This points to a problem in how floating-point instructions are emulated. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/693 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/693 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/693 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/695 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/695 new file mode 100644 index 00000000..20cc7402 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/695 @@ -0,0 +1,8 @@ +The bug report mentions "MIPS: nanomips p32 ABI not supported," which indicates an issue related to the Application Binary Interface (ABI) for the MIPS architecture. This is specifically about runtime support for a particular ABI variant in QEMU. + +Step-by-step explanation: +1. The error message points to a lack of support for the `nanomips p32` ABI. +2. ABI issues are generally related to how the program interacts with the system at runtime. +3. Therefore, this falls under runtime errors rather than being an instruction or syscall issue. + +Answer: runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/697 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/697 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/697 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/698 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/698 new file mode 100644 index 00000000..d5767eef --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/698 @@ -0,0 +1,3 @@ +The issue revolves around problems with reading memory addresses using `/proc/self/mem` when running 32-bit ARM and i386 guests under QEMU user-mode emulation. The mappings differ between host and guest, leading to I/O errors or mismatches in address spaces. This relates to how QEMU handles the runtime environment of emulated processes. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/754635 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/754635 new file mode 100644 index 00000000..5f7fc710 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/754635 @@ -0,0 +1,3 @@ +The issue pertains to incorrect memory region calculations affecting how QEMU logs or handles guest memory sections during execution, leading to mismatches between different releases. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/796480 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/796480 new file mode 100644 index 00000000..0fc99d2a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/796480 @@ -0,0 +1,5 @@ +The issue arises from how QEMU handles memory addresses during user-mode emulation when translating guest instructions into host code. Specifically, it misinterprets two different 64-bit guest addresses as the same due to their lower 32 bits being identical, leading to incorrect memory accesses and data retrieval. + +This problem is related to **instruction** handling in QEMU's translation process. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/805 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/805 new file mode 100644 index 00000000..1e8f74ef --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/805 @@ -0,0 +1,7 @@ +The issue described involves an error when attempting to run a Hexagon binary using QEMU. The specific error message is "Error mapping file: Invalid argument." This indicates a problem during the execution or initialization phase of QEMU, specifically related to how the binary file is being handled or mapped into memory. + +Given that this occurs at runtime and relates to the process of loading or executing the binary, it falls under the category of **runtime** errors. Runtime issues typically occur when the program is executing and encounters problems such as invalid arguments, incorrect mappings, or other execution-related failures. + +Therefore, based on the information provided: + +**Answer:** runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/866 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/866 new file mode 100644 index 00000000..764bdca4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/866 @@ -0,0 +1,3 @@ +The issue arises from creating and destroying threads in a loop without properly releasing resources, leading to increasing memory consumption over time. This indicates a problem related to how the program manages its runtime environment, specifically resource allocation and deallocation during thread execution. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/886621 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/886621 new file mode 100644 index 00000000..101f4eb1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/886621 @@ -0,0 +1,3 @@ +The bug report includes details about VM regions, memory allocation, and process activity, which are related to how the program runs and manages resources during execution. It does not point to a specific faulty instruction or a syscall error but describes general runtime issues. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/909 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/909 new file mode 100644 index 00000000..4376ce50 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/909 @@ -0,0 +1,3 @@ +The issue described relates to problems encountered during the execution or runtime environment of QEMU when emulating MIPS N32 binaries. The failure occurs while loading shared libraries, indicating an issue with how the emulator handles the runtime environment for these specific binaries. + +**Answer: runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/922 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/922 new file mode 100644 index 00000000..4a0291ae --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/922 @@ -0,0 +1,3 @@ +The issue involves random segmentation faults when running ARM binaries using `qemu-arm-static`, specifically when executing `grep` multiple times. This suggests that there's an instability or error occurring during execution rather than issues with specific instructions or system calls. + +Category: **runtime** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/939 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/939 new file mode 100644 index 00000000..a961e791 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/939 @@ -0,0 +1,3 @@ +The issue involves memory allocations exceeding the upper limit for N32 pointers in QEMU, leading to segmentation faults during execution. This points to a problem occurring at runtime rather than issues with specific instructions or system calls. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/95 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/95 new file mode 100644 index 00000000..0df3a0ec --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/95 @@ -0,0 +1,16 @@ +Alright, I'm trying to classify this bug report for QEMU into one of the given categories: instruction, syscall, or runtime. The bug report mentions that when running in linux-user mode, setting a very small RLIMIT_AS causes issues, specifically hanging when using gnutls28 and coreutils configure check code. + +First, I'll break down what each category means. + +- **Instruction**: This would involve issues with specific CPU instructions, maybe something wrong with how QEMU emulates certain instructions or handles them. +- **Syscall**: Problems related to system calls. If QEMU isn't handling a particular syscall correctly, or if there's a misuse of syscalls, this would fall here. +- **Runtime**: This is a broader category for issues that occur during execution but aren't specifically tied to instructions or syscalls. It could involve memory management, resource limits, or other environment-related problems. + +Looking at the bug report, it talks about RLIMIT_AS being set very small causing hangs. RLIMIT_AS is a resource limit that controls the maximum size of the process's virtual memory. When this limit is too low, it can cause processes to fail or hang because they can't allocate enough memory. + +So, the issue isn't about specific instructions being faulty (so not instruction) nor is it directly about a system call being mishandled by QEMU (so not syscall). Instead, it's related to how QEMU handles runtime resource limits, specifically in linux-user mode. When RLIMIT_AS is set too small, the guest processes can't run properly, leading to hangs. + +Therefore, this falls under **runtime** issues because it's about how QEMU manages resources and constraints during execution rather than specific instructions or syscalls. +</think> + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/967 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/967 new file mode 100644 index 00000000..9e1976b3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/967 @@ -0,0 +1 @@ +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/979 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/979 new file mode 100644 index 00000000..0a01c764 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/runtime/979 @@ -0,0 +1,3 @@ +The issue pertains to floating point conversion functions in the s390x architecture within QEMU, specifically affecting test cases related to `float_convs` and `float_convd`. Since it deals with how instructions handle floating-point operations, it falls under the **instruction** category. + +runtime \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1007 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1007 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1007 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1010 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1010 new file mode 100644 index 00000000..d64829b5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1010 @@ -0,0 +1,3 @@ +The issue revolves around problems with system calls related to the `9p` filesystem, specifically errors occurring during directory operations like `getdents64` and attribute retrieval using `lgetxattr`. These are indicative of syscall-related issues rather than faulty instructions or general runtime errors. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1012 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1012 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1012 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1031920 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1031920 new file mode 100644 index 00000000..8720a4d5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1031920 @@ -0,0 +1,3 @@ +The issue describes that `Ctrl-C` interrupts are not being responded to by `gdbserver` during remote debugging using QEMU. This points to a problem related to how system calls (specifically signal handling) are being managed in the runtime environment. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1033 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1033 new file mode 100644 index 00000000..3c473e0b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1033 @@ -0,0 +1,6 @@ +The bug report describes an issue where `fakeroot` under `qemu` fails with the error message `semop(1): encountered an error: Function not implemented`. This error is related to a syscall (`semop`) not being implemented correctly in `qemu`, which caused the failure. The user mentions that they are using the most recent version of `qemu` built from the git repository, implying that the issue might still exist despite previous fixes. + +The problem occurs during runtime when executing `fakeroot debian/rules clean` as part of a `dpkg-buildpackage` process within an `schroot` environment. The error points to a specific syscall malfunctioning, which falls under the category of system call issues. + +**Answer:** +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1054831 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1054831 new file mode 100644 index 00000000..546a7707 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1054831 @@ -0,0 +1,7 @@ +The issue arises during the second stage of debootstrap within a sparc chroot environment on a Debian x86-64 host. The user is using qemu-user-static for sparc32plus and encounters an error when running `/debootstrap/debootstrap --second-stage`. The specific error message is `bash: fork: Invalid argument`. + +The key point here is the error related to the `fork` system call, which is a fundamental operation for creating new processes. This suggests that there's an issue with how QEMU is handling system calls for the sparc32plus architecture, specifically when emulating the `fork` syscall. + +Given this context, the problem falls under the **syscall** category because it directly relates to an error in the `fork` system call during emulation. + +Answer: syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1066909 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1066909 new file mode 100644 index 00000000..0c39e5d2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1066909 @@ -0,0 +1,3 @@ +The bug report describes an issue related to how system calls are handled during thread creation, specifically when using CLONE_THREAD. This indicates a problem with the system call functionality in QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1072 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1072 new file mode 100644 index 00000000..5007bc67 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1072 @@ -0,0 +1,3 @@ +The issue describes different behaviors between running QEMU directly and debugging it remotely, specifically related to how file modes are interpreted (S_ISCHR test). This suggests an error in system calls or their handling during remote debugging. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075272 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075272 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075272 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075339 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075339 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1075339 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1076445 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1076445 new file mode 100644 index 00000000..211a2c3f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1076445 @@ -0,0 +1,5 @@ +The issue occurs when using `qemu-i386` and `qemu-x86_64` to run a program that calls `system()`, but it works correctly with `qemu-arm` and `qemu-mips`. This suggests that the problem is specific to how system calls are handled in QEMU for x86 and x86-64 architectures. The fact that the same code works on ARM and MIPS implies that the issue lies within the emulation of system calls for Intel-based architectures rather than a general problem with the `system()` function itself or the cross-compilation process. + +The error occurs during runtime when executing the `system()` call, indicating that it's related to how QEMU emulates system calls. Therefore, the category best fitting this issue is: + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1111 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1111 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1111 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1238 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1238 new file mode 100644 index 00000000..7f0b7c1b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1238 @@ -0,0 +1,7 @@ +The bug report describes an issue where certain packages fail during installation when using `coreutils-9` on an ext4 filesystem, specifically with n32 (MIPS 32-bit) binaries under QEMU emulation. The errors involve invalid arguments during file operations like `fadvise64` and `fallocate`, which are system calls related to file management. + +The problem seems to be centered around how these system calls are being handled by the QEMU emulator for MIPS architecture, particularly when interacting with ext4 filesystems. The `strace` output shows that the failure occurs at specific syscalls (`fadvise64` and `fallocate`), indicating a potential issue in how these syscalls are emulated or translated by QEMU. + +Given this analysis, the appropriate classification for the bug is related to system calls within the emulator. + +**syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1254672 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1254672 new file mode 100644 index 00000000..73e429bb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1254672 @@ -0,0 +1,3 @@ +The issue arises when running `ps` within a chroot environment set up using `qemu-debootstrap` for an ARM architecture on an AMD64 host. The segmentation fault suggests that there's an issue with how the system calls are being handled or translated by QEMU when emulating the ARM environment. This points to a problem in the system call emulation layer of QEMU rather than a general runtime error or a faulty instruction. + +**Answer: syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1261 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1261 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1261 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1263747 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1263747 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1263747 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/127 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/127 new file mode 100644 index 00000000..0e36d9a8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/127 @@ -0,0 +1,13 @@ +The user provided a bug report mentioning "linux-user missing cmsg IP_PKTINFO support" and an error message about unsupported ancillary data. The categories to choose from are instruction, syscall, or runtime. + +First, I need to understand what each category represents: +- **instruction**: This refers to issues with specific CPU instructions. +- **syscall**: This involves errors related to system calls. +- **runtime**: This covers other general runtime issues that don't fit the first two categories. + +The error message mentions "cmsg IP_PKTINFO support" and "ancillary data". These terms are associated with socket operations, which typically involve system calls. The `IP_PKTINFO` option is used in socket programming to retrieve packet information, and errors here suggest a problem with how QEMU handles certain system calls related to networking. + +Since the issue revolves around handling of network packets and socket options, it's likely related to system call processing within QEMU. Therefore, this falls under the **syscall** category. +</think> + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1346769 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1346769 new file mode 100644 index 00000000..da15d1f1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1346769 @@ -0,0 +1,3 @@ +The issue revolves around how QEMU handles system calls, specifically in the context of the `/proc/self/maps` content for 32-bit guests on a 64-bit host. The problem arises because certain targets (like ARM, M68K, and UNICORE32) have specific handling for stack boundaries that other architectures do not, leading to Asan failing to find stack boundaries when running 32-bit binaries under QEMU. This points to an error in how system calls are implemented or handled. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1356916 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1356916 new file mode 100644 index 00000000..5b2d0d1f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1356916 @@ -0,0 +1,3 @@ +The issue relates to the user-space emulation in QEMU imposing a fixed limit on argv/environ, which causes execve to fail when it shouldn't. This is an error related to system calls (syscalls) because it involves how QEMU handles the execution environment and arguments passed to processes. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1361 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1361 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1361 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1394 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1394 new file mode 100644 index 00000000..ce81d16f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1394 @@ -0,0 +1,3 @@ +The issue involves incorrect byte swapping when using `getresuid()` in a big-endian sparc64 environment under QEMU. This points to a problem with how system calls are handled, specifically with uid_t values not being properly endianness-adjusted. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1397 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1397 new file mode 100644 index 00000000..7c4329e5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1397 @@ -0,0 +1,3 @@ +The bug report mentions that `break` and `hbreak` do not set breakpoints at the correct address when using symbols, which relates to debugging functionality during program execution. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/140 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/140 new file mode 100644 index 00000000..190b3ec2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/140 @@ -0,0 +1,3 @@ +The issue mentions that `clone()` can't handle `glibc posix_spawn()`, leading to an assertion in `locale-gen`. This points to a problem with how system calls are handled or translated within QEMU, particularly related to process creation mechanisms. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1416988 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1416988 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1416988 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1452 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1452 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1452 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1457275 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1457275 new file mode 100644 index 00000000..50cb32b8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1457275 @@ -0,0 +1,5 @@ +The provided strace output shows that `qemu-arm` is making repeated calls to `mmap` and `munmap` system calls, creating and deleting memory mappings in a loop. This behavior suggests an issue with how QEMU is handling memory management or system calls during its execution. + +Given the repetition of these system calls without any signs of completing or proceeding further, this seems to be a problem related to system call handling rather than a specific instruction fault or general runtime error. + +**Answer: syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1462640 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1462640 new file mode 100644 index 00000000..6f22c2da --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1462640 @@ -0,0 +1,3 @@ +The issue revolves around the `shmat` system call failing when running a 32-bit guest program on a 64-bit host using QEMU. The problem arises due to differences in memory mapping flags between 32-bit and 64-bit environments. Specifically, the 32-bit guest program uses `MAP_PRIVATE` for `mmap`, which conflicts with the `shmat` call that requires shared memory mapping (`MAP_SHARED`). This indicates a problem with how system calls are handled in QEMU, particularly related to memory management. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1470170 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1470170 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1470170 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1516408 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1516408 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1516408 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1563612 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1563612 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1563612 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1585840 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1585840 new file mode 100644 index 00000000..1c65521c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1585840 @@ -0,0 +1,11 @@ +The issue arises when running a multiprocess program that relies on shared memory and mutexes under QEMU's ARM user emulation. The program works correctly in threaded mode but fails in multiprocess mode, pointing to potential problems in how system calls related to process management or inter-process communication are handled. + +The key points from the bug report: +- The program uses shared memory regions with shmat (similar to mmap). +- It consistently passes on real hardware but fails under QEMU. +- The failure is observed specifically in multiprocess mode, not threaded mode. +- This suggests issues with how QEMU emulates system calls related to process creation, synchronization primitives, or shared memory management. + +Given that the problem occurs only under QEMU and involves inter-process communication via shared memory and mutexes, it likely relates to how QEMU handles system calls involved in these operations. Therefore, the category is: + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1594394 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1594394 new file mode 100644 index 00000000..a332f619 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1594394 @@ -0,0 +1,5 @@ +The bug report describes an issue where calling `setreuid()` or `setegid()` from x86_64 user-mode code causes QEMU to crash due to improper handling of signal mechanisms related to NPTL (Native POSIX Threads Library). The problem arises because the necessary setup for these calls is not correctly handled in QEMU, leading to a segmentation fault. Specifically, the `__xidcmd` variable remains null, indicating that the required memory region for the signal handlers was not properly initialized. + +This issue relates directly to how system calls are emulated or handled within QEMU. The crash occurs during the execution of these specific syscalls due to missing or incorrect initialization of structures needed by the NPTL library. Therefore, this is categorized under `syscall`. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1605443 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1605443 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1605443 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1619896 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1619896 new file mode 100644 index 00000000..93606861 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1619896 @@ -0,0 +1,3 @@ +The bug report mentions an "Unsupported ancillary data" error related to `IP_PKTINFO` when running a Teamspeak server using QEMU on an ARM host. This error is tied to how QEMU handles certain system calls, specifically those dealing with network packet information. The issue arises during runtime when clients connect, indicating a problem with the system call implementation in QEMU. + +Category: **syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1643619 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1643619 new file mode 100644 index 00000000..3f116b57 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1643619 @@ -0,0 +1,7 @@ +The issue arises from a problem in handling netlink sockets on big-endian MIPS systems within QEMU. The bug report indicates that the `fd_trans_unregister` function is being called immediately after registering an FD translation in the `do_syscall` function for the `socket` system call. This premature unregistering causes the netlink functionality to break, as the necessary file descriptor translations are no longer available when needed. + +This directly relates to how QEMU handles system calls, specifically the management of file descriptor translations for socket operations. The incorrect unregistering of the FD translation disrupts the communication required for netlink sockets, leading to hangs and failures in commands like `ip route`. + +The problem is classified under the **syscall** category because it involves an error in handling a specific system call (socket) within QEMU's user-space emulation. + +**Answer:** syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1650 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1650 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1650 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1673976 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1673976 new file mode 100644 index 00000000..1c6ee695 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1673976 @@ -0,0 +1,3 @@ +The issue arises from `locale-gen` failing due to an assertion error in `__spawnix`, which suggests a problem related to how system calls are handled, particularly during process spawning. This points towards a potential bug in how QEMU emulates system calls for ARM on x86_64. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1689367 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1689367 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1689367 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696353 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696353 new file mode 100644 index 00000000..9f2fd110 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696353 @@ -0,0 +1,3 @@ +The issue arises because the Go runtime doesn't use the `CLONE_SYSVMEM` flag when calling `clone`, which is required for proper process creation under certain environments like QEMU's linux-user mode. This problem is specifically related to how system calls are handled in the context of creating new OS threads, which falls under the category of **syscall** errors. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696773 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696773 new file mode 100644 index 00000000..adbc907a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1696773 @@ -0,0 +1,3 @@ +The issue involves goroutines (threads) and repeated calls to `exec`, which cause a segfault under ARM user emulation but work natively. This points to an error in how system calls are being handled during emulation, particularly when multiple threads are involved. The problem is likely related to the `exec` system call not functioning correctly within QEMU's environment. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701808 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701808 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701808 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701971 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701971 new file mode 100644 index 00000000..02cb9965 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701971 @@ -0,0 +1,3 @@ +The issue revolves around thread management and futex syscalls within QEMU's user mode emulation for SH4. The problem occurs when pthread_join doesn't work as expected, causing threads to hang. This indicates a potential error in how QEMU handles system calls related to threading. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701973 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701973 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701973 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701974 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701974 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1701974 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1707 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1707 new file mode 100644 index 00000000..db063d9c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1707 @@ -0,0 +1,3 @@ +The issue involves an inability to execute a binary compiled for x86_64 on an AArch64 or LoongArch host using QEMU's linux-user mode. The problem arises after a specific commit related to the `brk()` system call, which is used for memory management. + +**Category:** syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716292 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716292 new file mode 100644 index 00000000..f12d0ec6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716292 @@ -0,0 +1,3 @@ +The bug report describes an issue where QEMU's user-mode emulation incorrectly handles the `write` system call when passed a zero length and a null pointer, returning `-1` instead of the expected `0`. This is clearly related to how system calls are handled in QEMU, specifically the `write` syscall. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716767 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716767 new file mode 100644 index 00000000..c4c158d1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1716767 @@ -0,0 +1,3 @@ +The issue revolves around an "Invalid argument" error when using the `file` command on a specific ELF file within a qemu-sh4-user environment. The problem doesn't seem to be related to faulty instructions or system calls directly but rather to how the runtime environment (specifically, QEMU) is handling certain operations. The error occurs during runtime execution, indicating a potential issue with how QEMU emulates the SH-4 architecture or processes ELF files. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1726394 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1726394 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1726394 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1728116 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1728116 new file mode 100644 index 00000000..49f8779f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1728116 @@ -0,0 +1,3 @@ +The issue lies in how QEMU handles system calls, specifically the `openat()` system call when accessing `/proc/self/auxv`. The problem arises because the length of the auxiliary vector is not being correctly calculated or passed, leading to an empty file being returned. This directly relates to a bug in the implementation of system calls within QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1729 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1729 new file mode 100644 index 00000000..b38719af --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1729 @@ -0,0 +1,3 @@ +The issue revolves around `mremap` failing with `EFault` due to address range overlapping with stack guard, which is related to how system calls behave differently on a 64-bit host versus a 32-bit user-space. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734 new file mode 100644 index 00000000..18425187 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734 @@ -0,0 +1,3 @@ +The issue revolves around mmap system calls failing when attempting to map more than 1GB of files, specifically due to memory address space exhaustion starting from 0x00000000 - 0x40000000. This points directly to a problem with how QEMU handles system calls during runtime. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734792 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734792 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1734792 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1749393 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1749393 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1749393 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1756 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1756 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1756 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1760 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1760 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1760 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1761153 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1761153 new file mode 100644 index 00000000..9d706f09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1761153 @@ -0,0 +1,3 @@ +The issue revolves around `qemu-user` incorrectly handling mmap for large files when running 32-bit executables on a 64-bit host. This points to a problem with how system calls are being emulated, specifically the mmap syscall. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1770 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1770 new file mode 100644 index 00000000..9602472e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1770 @@ -0,0 +1,3 @@ +The issue revolves around an incorrect structure packing for `epoll_event` specific to the OpenRISC (or1k) architecture in QEMU's system call definitions. This directly relates to how system calls are handled, particularly regarding the epoll mechanism. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1776478 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1776478 new file mode 100644 index 00000000..ae56c0f6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1776478 @@ -0,0 +1,3 @@ +The issue involves an assertion failure in `pthread_mutex_lock` and an uncaught target signal 6 (Aborted), leading to a core dump during cross-compilation using `qemu-arm-static`. The problem occurs at runtime when executing specific commands, indicating issues related to how QEMU handles system calls or thread synchronization. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1777226 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1777226 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1777226 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1783362 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1783362 new file mode 100644 index 00000000..9431e88d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1783362 @@ -0,0 +1,3 @@ +The issue revolves around `mmap` returning an incorrect value when `len == 0`. This directly relates to how system calls are emulated in QEMU for different architectures (x86_64 and ARM aarch64). The problem occurs specifically with the `mmap` system call, which is misbehaving under certain conditions. Therefore, this falls under the category of a syscall error. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1785203 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1785203 new file mode 100644 index 00000000..e5e5bf20 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1785203 @@ -0,0 +1,3 @@ +The bug report indicates that QEMU crashes when calling `mincore()` with an invalid pointer. The error message shows an assertion failure related to address space validation during page checks, specifically within the `page_check_range` function in `translate-all.c`. This issue arises during a system call (`mincore`) and involves memory management. Therefore, it falls under the **syscall** category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791763 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791763 new file mode 100644 index 00000000..f8d6ac8b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791763 @@ -0,0 +1,3 @@ +The bug report discusses issues related to signal handling in QEMU's nios2 user-mode emulation, specifically problems with system calls like sigaltstack and signal handlers not being invoked correctly. These are issues with how system calls are implemented or handled. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791796 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791796 new file mode 100644 index 00000000..4887ae3a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1791796 @@ -0,0 +1,3 @@ +The bug report indicates that certain thread-related system calls (set_robust_list and clone) are unimplemented in the Nios2 user-mode emulation within QEMU. These unimplemented syscalls cause failures when running specific tests, such as those related to TLS (Thread-Local Storage). The issue directly pertains to missing or incorrect implementations of system calls required for thread operations. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1807 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1807 new file mode 100644 index 00000000..f0b04bcb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1807 @@ -0,0 +1,3 @@ +The issue occurs when trying to run a statically compiled SPARC64 binary under QEMU, resulting in a segmentation fault or an invalid ELF image error. This suggests a problem with how QEMU handles system calls or interactions with the runtime environment. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1808563 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1808563 new file mode 100644 index 00000000..54ae9fba --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1808563 @@ -0,0 +1,3 @@ +The issue involves how `qemu-arm` handles the `QEMU_LD_PREFIX` environment variable when executing a program. When listing the contents of `/`, it incorrectly remaps the root directory to the path specified by `QEMU_LD_PREFIX`. This behavior suggests that there's an error in how system calls are being handled, particularly with the `openat` syscall which is used to open directories. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1810433 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1810433 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1810433 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1813307 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1813307 new file mode 100644 index 00000000..9c286df3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1813307 @@ -0,0 +1,7 @@ +The bug report discusses an issue where `follow_path()` in `util/path.c` does not handle the root directory "/" correctly when running under QEMU. This leads to inconsistent behavior when trying to determine the current working directory using `__getcwd`, which relies on `lstat` and traversing directories with "..". The problem arises because `follow_path()` returns the path corresponding to `QEMU_LD_PREFIX` instead of treating "/" as the actual root directory, causing failures in `gdbserver`. + +The issue revolves around how system calls related to file paths are handled within QEMU. Specifically, it involves the implementation of `lstat`, which is a system call used to retrieve information about a file or directory. The incorrect handling of the root directory "/" affects the ability to accurately determine the current working directory and navigate through directories, leading to runtime errors. + +This problem fits into the category of "syscall" because it pertains to how QEMU handles system calls related to file operations, particularly `lstat`. The bug report highlights a flaw in the emulation of these syscalls, which directly impacts the functionality of programs running under QEMU, such as `gdbserver`. + +**Answer: syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1821006 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1821006 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1821006 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1829459 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1829459 new file mode 100644 index 00000000..79512232 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1829459 @@ -0,0 +1,3 @@ +The issue arises because `qemu` does not support PID namespaces when running in user mode, leading to an "Invalid argument" error when attempting to create threads or processes within a namespace. This points to a problem with how QEMU handles system calls related to process management. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1837 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1837 new file mode 100644 index 00000000..51631a44 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1837 @@ -0,0 +1,3 @@ +The issue revolves around the `setsockopt` system call failing due to missing support for `IP_MULTICAST_IF` in QEMU's user mode emulation. This is specifically related to how system calls are handled within QEMU, indicating it's a **syscall** category bug. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1857811 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1857811 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1857811 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1860053 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1860053 new file mode 100644 index 00000000..47122da9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1860053 @@ -0,0 +1,3 @@ +The issue revolves around a problem with how QEMU's user-mode emulation handles vDSO calls for clock_gettime() on ppc64le architectures. Specifically, when using Go 1.12 and above, which switched to using vDSO for these calls, there is a malfunction in time-related functions like NewTicker() and Sleep(). This suggests that the problem lies within QEMU's emulation of system calls related to timing functions. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1861341 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1861341 new file mode 100644 index 00000000..8103d33b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1861341 @@ -0,0 +1,3 @@ +The issue revolves around QEMU encountering an unknown system call (syscall) number 397, identified as statx, when running ARM images on an x86_64 host using Flatpak. This indicates a problem with how QEMU handles system calls. + +**Answer: syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1869241 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1869241 new file mode 100644 index 00000000..654bb891 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1869241 @@ -0,0 +1,7 @@ +The issue arises from using `qemu-arm-static` to emulate ARM on an x86_64 host and encountering an "E000075" error when trying to access a directory via Subversion (SVN). The specific error message indicates that a value is too large for the defined data type. This suggests that there's a mismatch in how data types are handled between the emulated ARM environment and the host system. + +The problem likely stems from the way `qemu` handles system calls during emulation, particularly those related to file operations. When interacting with the filesystem through SVN, certain system calls might not be correctly translated or handled by `qemu`, leading to type mismatches that cause the error. + +Therefore, this issue falls under the **syscall** category because it relates to errors in how system calls are managed during emulation. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1870477 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1870477 new file mode 100644 index 00000000..9eb6d42c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1870477 @@ -0,0 +1,3 @@ +The issue involves `qemu-arm` hanging when running a Go test, which suggests a problem occurring during the execution or emulation process. This points towards issues that arise during the runtime environment rather than specific instructions or system calls. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1876373 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1876373 new file mode 100644 index 00000000..529606c0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1876373 @@ -0,0 +1,5 @@ +The issue arises when using `mremap` within QEMU, specifically when shrinking a buffer to 4096 bytes. This behavior is inconsistent across different architectures and native versus emulated environments. The problem lies in how QEMU handles the `mremap` system call during emulation. + +**Category: syscall** + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1884719 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1884719 new file mode 100644 index 00000000..76f83457 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1884719 @@ -0,0 +1,3 @@ +The issue revolves around system calls failing when using QEMU user emulation for foreign architectures, specifically encountering "Function not implemented" errors related to libaio functions. This points directly to problems with system call handling in QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1886097 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1886097 new file mode 100644 index 00000000..a80347dc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1886097 @@ -0,0 +1,5 @@ +The issue revolves around how QEMU and Linux handle the calculation of the initial program break for ELF binaries, specifically regarding segments with different permissions. The discrepancy arises because QEMU's method for determining `info->brk` considers only segments with write permissions (PROT_WRITE), while Linux sets it based on the highest virtual address of any loadable segment, regardless of its flags. This mismatch leads to incorrect program break values in QEMU, causing runtime crashes when binaries are executed. + +Given that this problem pertains to how system calls are handled and calculated within QEMU's emulation layer, particularly concerning the `brk` system call, it falls under the category of a **syscall** issue. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1887306 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1887306 new file mode 100644 index 00000000..d35e4f60 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1887306 @@ -0,0 +1,3 @@ +The issue arises due to deadlocks occurring when using QEMU user mode emulation with multithreaded processes that fork multiple times. The problem seems related to how syscalls are handled in QEMU's runtime environment rather than specific instructions or direct syscall errors. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1893010 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1893010 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1893010 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1894361 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1894361 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1894361 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1910605 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1910605 new file mode 100644 index 00000000..2be36e77 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1910605 @@ -0,0 +1,31 @@ +The issue arises when using `qemu-arm-static` but not with `qemu-aarch64-static`, indicating that the problem is specific to how system calls are handled on 32-bit ARM versus 64-bit ARM environments. The error `EFAULT (Bad address)` suggests an invalid pointer is being passed to the `ioctl` system call. + +Looking at the code snippet: + +```c +struct usbdevfs_bulktransfer Bulk; +Bulk.ep = hUsb->UsbOut; +Bulk.len = Len; +Bulk.data = (void *)pData; +Bulk.timeout = Timeout; +Bytes = ioctl(hUsb->fd, USBDEVFS_BULK, &Bulk) +``` + +The problem likely lies in how the `usbdevfs_bulktransfer` structure is being handled. The structure size or data alignment might differ between 32-bit and 64-bit environments, causing the address to be invalid in one case but valid in the other. + +This points to an issue with the system call handling, specifically how the `ioctl` syscall processes the structure pointer on different architectures. + +**Step-by-Step Explanation:** + +1. **System Call Behavior:** The `ioctl` system call is being used with the `USBDEVFS_BULK` command. This command expects a pointer to a `usbdevfs_bulktransfer` structure. + +2. **Structure Size Mismatch:** On 32-bit ARM (`qemu-arm-static`), the size of the `usbdevfs_bulktransfer` structure might be different compared to 64-bit ARM (`qemu-aarch64-static`). This mismatch can cause the kernel to interpret the pointer incorrectly, leading to an `EFAULT`. + +3. **Data Alignment:** The alignment of data within the structure might also differ between architectures, causing the address passed to `ioctl` to point to an invalid memory location. + +4. **Architectural Differences:** QEMU emulates different architectures, and if the structure or its members are not properly handled in the 32-bit ARM emulation, it can result in incorrect memory addressing. + +Given that the error is related to system call handling and structure alignment across different architectures, this falls under the **syscall** category. The issue is not with a faulty instruction but rather with how the system call interacts with user-space data structures on different architectures. + +**Answer:** +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1915925 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1915925 new file mode 100644 index 00000000..20ae2dcd --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1915925 @@ -0,0 +1,3 @@ +The bug report describes an issue related to how QEMU handles the `SYS_HEAPINFO` semihosting call, specifically incorrect handling of the parameter register address leading to memory corruption or crashes. This is directly tied to the system call (syscall) implementation in QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926044 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926044 new file mode 100644 index 00000000..e1ea3d9f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926044 @@ -0,0 +1,3 @@ +The issue involves `getauxval(AT_HWCAP2)` not correctly reporting the `HWCAP2_MTE` capability when using QEMU-user. This suggests a problem with how system calls or auxiliary vector values are handled in QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926246 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926246 new file mode 100644 index 00000000..f2195375 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926246 @@ -0,0 +1,3 @@ +The issue revolves around Chrome-based applications failing to run under QEMU user mode due to how they handle forking processes using `/proc/self/exe`. The problem is tied to system calls, specifically `execl`, which QEMU doesn't recognize when passed the option `'type=renderer'`. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926521 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926521 new file mode 100644 index 00000000..673edc69 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926521 @@ -0,0 +1,3 @@ +The issue revolves around QEMU-user not properly handling the `MADV_DONTNEED` option in the `madvise` system call, leading to incorrect behavior when applications rely on this syscall to clear memory. This directly relates to how syscalls are implemented and handled within QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926996 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926996 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/1926996 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2112 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2112 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2112 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2123 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2123 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2123 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2168 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2168 new file mode 100644 index 00000000..e421e9b9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2168 @@ -0,0 +1,11 @@ +The issue involves a segmentation fault occurring when running `grep` using QEMU on an ARM64 host. The GDB backtrace shows that the problem arises from `open_self_maps_2`, which is related to handling memory regions and syscalls within QEMU's user-space emulation. + +Step-by-step explanation: + +1. **Problem Identification**: A segmentation fault occurs when running a specific command (`grep`) under QEMU, indicating an issue with memory access or system calls. + +2. **Backtrace Analysis**: The GDB backtrace points to functions involved in processing syscalls and memory maps (`open_self_maps_2`, `walk_memory_regions`, etc.), suggesting the problem lies within how QEMU handles these operations. + +3. **Category Determination**: Since the error is directly linked to system call handling (specifically, accessing `/proc/self/maps`), it falls under the "syscall" category rather than an instruction-level fault or a general runtime issue. + +Answer: `syscall` \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2170 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2170 new file mode 100644 index 00000000..c9f975e8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2170 @@ -0,0 +1,3 @@ +The issue arises from a system call related to `open_self_maps`, indicating a problem with how QEMU handles syscalls. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2197 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2197 new file mode 100644 index 00000000..121a7d3f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2197 @@ -0,0 +1,3 @@ +The bug report describes an issue where QEMU incorrectly handles the `setsockopt()` system call when `optlen` is set to 0. This results in QEMU returning `-1` with `ENOMEM`, while the expected behavior is for the call to succeed and return zero. The problem is specific to how QEMU processes this particular system call. + +**syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2262 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2262 new file mode 100644 index 00000000..908ced09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2262 @@ -0,0 +1,3 @@ +The issue revolves around the `wait4` system call returning incorrect values on RISC-V 32-bit under QEMU user emulation. This causes hanging processes and infinite loops, indicating a problem with how system calls are handled. Therefore, the bug falls under the **syscall** category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2333 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2333 new file mode 100644 index 00000000..00348568 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2333 @@ -0,0 +1,10 @@ +The issue involves a segmentation fault when using `__clock_gettime64()` through VDSO on `qemu-armeb`, but not on `qemu-arm`. The problem is tied to how the VDSO (Virtual Dynamic Shared Object) is handled in the big-endian ARM environment. Specifically, the stack trace points to an issue within `__GI___clock_gettime64` and `__GI___time64`, which are part of glibc's interaction with the system calls via VDSO. + +The key indicators here are: +- The segmentation fault occurs when calling into the VDSO implementation. +- Disabling VDSO resolves the problem, suggesting that the issue lies within the VDSO mechanism itself or its usage in this specific architecture. +- The same code works correctly on little-endian ARM (`qemu-arm`), indicating an architecture-specific bug. + +This points to a problem with how system calls are being handled through the VDSO layer in big-endian ARM environments. Therefore, the category is: + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2353 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2353 new file mode 100644 index 00000000..0fea7d31 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2353 @@ -0,0 +1,5 @@ +The bug report deals with an issue in QEMU's user-mode emulation where it incorrectly maps the ELF interpreter at guest address 0 when `guest_base` is non-zero. This leads to segfaults and incorrect behavior in certain libraries like musl due to violating Linux's policy of not mapping anything at the first page. The problem lies within the `target_mmap()` function, which does not correctly handle a NULL address (0) as per POSIX standards when translating guest addresses to host addresses. + +The issue is related to system calls, specifically how QEMU handles memory mapping syscalls and translates addresses between guest and host systems. Therefore, it falls under the category of **syscall** errors. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2390 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2390 new file mode 100644 index 00000000..775df20a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2390 @@ -0,0 +1,3 @@ +The issue pertains to Qemu's handling of a specific system call (`getsockopt`), where it incorrectly returns an error when `optval` is NULL, contrary to expected behavior on native Linux systems and documentation. This falls under errors related to system calls. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2410 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2410 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2410 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2446 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2446 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2446 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2504 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2504 new file mode 100644 index 00000000..7c90419a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2504 @@ -0,0 +1,3 @@ +The issue involves running an x86_64 binary (ls) on a LoongArch machine using chroot and QEMU, which suggests that there might be problems with how system calls are being handled or translated between different architectures. This points towards issues related to system call emulation. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2592 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2592 new file mode 100644 index 00000000..da5fca49 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2592 @@ -0,0 +1,3 @@ +The issue occurs when running Python under `qemu-aarch64`, specifically with functions from the `time` module like `time.time()`. The error is an `OSError`, which suggests it's related to system calls or interaction with the operating environment. Since the problem doesn't occur on native aarch64 machines but does with QEMU, and similarly works fine with `qemu-arm`, this points to a potential issue with how QEMU handles certain syscalls for AArch64. Therefore, this is likely a syscall-related problem. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2606 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2606 new file mode 100644 index 00000000..f399bbbb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2606 @@ -0,0 +1,3 @@ +The issue revolves around incorrect assembler syntax and ABI compliance for PowerPC on Darwin, leading to compilation failures and crashes at runtime. This is related to how system calls are handled in the code, specifically within the assembly instructions and their compatibility with the target platform's ABI. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/263 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/263 new file mode 100644 index 00000000..acc00201 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/263 @@ -0,0 +1,3 @@ +The issue occurs when `readdir()` returns NULL with an errno of EOVERFLOW. This suggests that there's an overflow condition happening during a system call related to reading directory entries, likely due to incorrect handling of data sizes between 32-bit and 64-bit environments. Therefore, this falls under the "syscall" category as it involves an error in a system call. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2738 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2738 new file mode 100644 index 00000000..4c7cbad0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2738 @@ -0,0 +1,3 @@ +The issue involves a hang during a Go build under QEMU user emulation, specifically when using `podman build --arch aarch64`. This points to a problem in the runtime environment rather than an instruction or syscall error. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/275 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/275 new file mode 100644 index 00000000..c300e331 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/275 @@ -0,0 +1,3 @@ +The issue relates to an error in user-mode calculation of the ELF aux vector's AT_PHDR, which is part of the runtime environment rather than a specific instruction or system call. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/276 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/276 new file mode 100644 index 00000000..8a71fe20 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/276 @@ -0,0 +1,3 @@ +The issue relates to an error in calculating the `brk` value for an ELF program in user-mode, which suggests it's related to system calls since `brk` is a system call used for memory management. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2825 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2825 new file mode 100644 index 00000000..6917f776 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/2825 @@ -0,0 +1,3 @@ +The issue revolves around the `execveat` system call when using an empty filename and the `AT_EMPTY_PATH` flag across different architectures. This specifically affects non-x86 architectures like ARM64, ARM, and RISC-V, where it returns `ENOENT`. The problem is tied to how QEMU handles system calls, particularly in user emulation mode, and how it interacts with the binfmt_misc mechanism. This points directly to a problem within the QEMU implementation of system call handling for non-native architectures. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/326 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/326 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/326 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/356 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/356 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/356 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/456 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/456 new file mode 100644 index 00000000..594a1c1c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/456 @@ -0,0 +1,3 @@ +The issue involves an unimplemented `futex` system call when running under QEMU, causing the process to hang. This points directly to a problem with how QEMU handles system calls, specifically the `futex` functionality. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/470 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/470 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/470 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/570 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/570 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/570 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/577 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/577 new file mode 100644 index 00000000..b5e80bbe --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/577 @@ -0,0 +1,3 @@ +The issue lies in how QEMU handles system calls, specifically in user mode emulation for Linux on Alpha architecture. The incorrect return value from `getdtablesize()` suggests a problem with how system calls are being processed or translated by QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/578 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/578 new file mode 100644 index 00000000..03053490 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/578 @@ -0,0 +1,13 @@ +The issue revolves around the `getdomainname()` function not being implemented in QEMU user mode for Linux/sparc64. This indicates that when the system call is made through QEMU, it does not provide an implementation for this specific function, leading to the "Function not implemented" error. + +**Step-by-step explanation:** + +1. **Understanding the Function**: The `getdomainname()` function is used to retrieve the domain name of the system. It interacts with the kernel via a system call. + +2. **QEMU's Role in Emulation**: QEMU emulates hardware and provides user mode emulation, which includes handling system calls. If a specific system call isn't implemented by QEMU for a particular architecture (like sparc64), it results in an error when that function is called. + +3. **Error Implication**: The "Function not implemented" error signifies that QEMU's user mode emulation for Linux/sparc64 does not have support for the `getdomainname()` system call. This means that any application relying on this function will fail when run under QEMU for this architecture. + +4. **Category Identification**: Since the problem is directly related to a missing implementation of a system call within QEMU, it falls under the "syscall" category. + +**Answer:** syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/579 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/579 new file mode 100644 index 00000000..a781c663 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/579 @@ -0,0 +1,3 @@ +The issue involves the `chown()` system call failing when it should succeed under specific conditions within QEMU user mode on Linux/sparc64 systems. This points to a problem related to how system calls are handled in QEMU. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/602 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/602 new file mode 100644 index 00000000..2177add1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/602 @@ -0,0 +1,3 @@ +The bug report pertains to an issue with translating error numbers (`ee_errno`) within the `IP_RECVERR` and `IPV6_RECVERR` control messages in QEMU's system call emulation. This is specifically related to how errors are handled during system calls, making it a **syscall** category issue. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/633 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/633 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/633 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/654 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/654 new file mode 100644 index 00000000..42293108 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/654 @@ -0,0 +1,3 @@ +The bug report describes an issue where strace log entries for syscalls are interrupted by other log messages before they are complete. This is due to non-atomic logging in QEMU's syscall handling, specifically affecting mmap syscalls when page dumps occur between printing parts of a single syscall entry. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/690 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/690 new file mode 100644 index 00000000..f7f52252 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/690 @@ -0,0 +1,7 @@ +The issue arises when running 32-bit ARM binaries using QEMU on an x86_64 host. The problem seems to be related to memory allocation in the guest space, specifically when allocating the commpage for the guest. This points towards issues with system calls responsible for memory management. + +The error occurs due to changes made in newer versions of QEMU (since version 5.1), which suggests that something in how QEMU interacts with the host's memory management via syscalls is causing the problem. The fact that adjusting `vm.mmap_min_addr` affects whether the error occurs further indicates that it's related to system-level parameters governing memory allocation. + +The bug report does not describe a faulty instruction or other runtime errors but focuses on issues with memory allocation, which is a system call issue. Therefore, the most appropriate classification for this bug is: + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/704 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/704 new file mode 100644 index 00000000..f51b02b1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/704 @@ -0,0 +1,3 @@ +The bug report mentions a misaligned address for 'struct linux_dirent64', which indicates an issue related to system calls since it involves structures used in system call interfaces, specifically directory entries. Therefore, this falls under the 'syscall' category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/714 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/714 new file mode 100644 index 00000000..f3aba004 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/714 @@ -0,0 +1,3 @@ +The issue involves incorrect handling of command-line arguments when using user-space semihosting in QEMU. This points to a problem with how system calls are managed, specifically related to argument passing. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/817 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/817 new file mode 100644 index 00000000..6e40dd69 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/817 @@ -0,0 +1,3 @@ +The bug report mentions that `waitid` leaves target `siginfo` uninitialized when `info.si_pid` is zero. This indicates an issue related to how system calls are handling or not handling certain conditions, specifically within the `waitid` syscall. The problem arises during runtime execution, but it's more precisely tied to the incorrect behavior of a system call. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/833 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/833 new file mode 100644 index 00000000..378e930c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/833 @@ -0,0 +1,3 @@ +The issue described pertains to a problem with the `sendmsg` system call when used within QEMU, specifically when handling messages that contain ancillary data but no regular data (i.e., zero-length `iov`). This discrepancy in behavior between native Linux and QEMU indicates an error in how QEMU emulates or handles the `sendmsg` syscall. The fact that the test case works on native Linux but fails under QEMU suggests that there's a bug in QEMU's implementation of this system call. + +**Answer: syscall** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/834 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/834 new file mode 100644 index 00000000..99ff0592 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/834 @@ -0,0 +1,3 @@ +The issue revolves around how signals are handled during the `pselect` system call within QEMU. The program expects to catch `SIGUSR1` when it's unmasked during `pselect`, but under QEMU, this doesn't happen even though the signal is delivered. This indicates a problem with how QEMU emulates or handles system calls related to signal delivery and processing. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/836 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/836 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/836 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/856 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/856 new file mode 100644 index 00000000..12aba97a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/856 @@ -0,0 +1,3 @@ +The issue involves deadlocks occurring when running the threadcount test in QEMU's sh4-linux-user environment. The backtrace shows threads waiting on futex syscalls and RCU events, indicating a potential synchronization problem at runtime. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/871 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/871 new file mode 100644 index 00000000..2d078d09 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/871 @@ -0,0 +1 @@ +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/885 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/885 new file mode 100644 index 00000000..b765c27e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/885 @@ -0,0 +1,3 @@ +The issue involves `getsockopt` writing an unexpected `int` value for `SO_RCVTIMEO_NEW` and `SO_SNDTIMEO_NEW`, which relates to socket options handled through system calls. Therefore, it falls under the **syscall** category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/911 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/911 new file mode 100644 index 00000000..d7877d5d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/911 @@ -0,0 +1,3 @@ +The issue involves the `execve` system call not being traced correctly when using QEMU for MIPSel user mode emulation. This suggests there's a problem with how system calls are handled or traced within QEMU, specifically related to the `execve` syscall. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/927 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/927 new file mode 100644 index 00000000..77f304bf --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/927 @@ -0,0 +1,5 @@ +The bug report describes an issue where `open("/proc/self/exe", ...)` returns a closed file descriptor when using qemu-user. This happens because the file descriptor is closed during initialization by `load_elf_image()`. The problem arises from how QEMU handles the `AT_EXECFD` auxval and the subsequent behavior of `do_openat`, leading to incorrect file descriptors being returned. + +This issue is related to system calls, specifically how `openat` behaves in this scenario. Therefore, it falls under the **syscall** category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/957 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/957 new file mode 100644 index 00000000..ae8241cc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/957 @@ -0,0 +1,5 @@ +The issue revolves around an unexpected error from the futex facility, which is related to system calls (syscalls) involving thread management and synchronization. The error occurs during Python interpreter rebuilds under QEMU emulation, specifically when multiple threads interact using futex operations. The logs show that futex calls are returning "Invalid argument" errors, leading to the crash. + +Since this pertains to errors in system call handling and interaction with kernel primitives (futex), it falls under the **syscall** category. + +syscall \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/982 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/982 new file mode 100644 index 00000000..08102b6b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/syscall/982 @@ -0,0 +1,3 @@ +The issue pertains to how `qemu` decodes system calls when running 32-bit and 64-bit binaries on different architectures, specifically affecting the `writev` system call arguments. This falls under errors related to system calls. + +syscall \ No newline at end of file |