From dee4dcba78baf712cab403d47d9db319ab7f95d6 Mon Sep 17 00:00:00 2001
From: Christian Krinitsin <mail@krinitsin.com>
Date: Thu, 3 Jul 2025 19:39:53 +0200
Subject: restructure results

---
 results/classifier/005/004-005                     |    7 -
 results/classifier/005/KVM/04472277                |  584 --
 results/classifier/005/KVM/26430026                |  173 -
 results/classifier/005/KVM/43643137                |  546 --
 results/classifier/005/KVM/71456293                | 1494 ----
 results/classifier/005/KVM/80615920                |  356 -
 results/classifier/005/README.md                   |    9 -
 results/classifier/005/boot/51610399               |  316 -
 results/classifier/005/boot/60339453               |   69 -
 results/classifier/005/categories.csv              |   11 -
 results/classifier/005/device/14488057             |  719 --
 results/classifier/005/device/24190340             | 2064 ------
 results/classifier/005/device/24930826             |   41 -
 results/classifier/005/device/26095107             |  166 -
 results/classifier/005/device/28596630             |  121 -
 results/classifier/005/device/36568044             | 4589 ------------
 results/classifier/005/device/42226390             |  195 -
 results/classifier/005/device/48245039             |  538 --
 results/classifier/005/device/57195159             |  323 -
 results/classifier/005/device/57231878             |  250 -
 results/classifier/005/device/67821138             |  207 -
 results/classifier/005/device/99674399             |  156 -
 results/classifier/005/graphic/22219210            |   51 -
 results/classifier/005/graphic/30680944            |  603 --
 results/classifier/005/graphic/46572227            |  414 --
 results/classifier/005/graphic/53568181            |   86 -
 results/classifier/005/graphic/55961334            |   47 -
 results/classifier/005/graphic/73660729            |   39 -
 results/classifier/005/instruction/11933524        | 1133 ---
 results/classifier/005/instruction/50773216        |  118 -
 results/classifier/005/instruction/63565653        |   57 -
 results/classifier/005/instruction/70868267        |   48 -
 results/classifier/005/mistranslation/14887122     |  266 -
 results/classifier/005/mistranslation/23270873     |  700 --
 results/classifier/005/mistranslation/25842545     |  210 -
 results/classifier/005/mistranslation/64322995     |   62 -
 results/classifier/005/mistranslation/70294255     | 1069 ---
 results/classifier/005/mistranslation/74466963     | 1886 -----
 results/classifier/005/mistranslation/74545755     |  352 -
 results/classifier/005/mistranslation/80604314     | 1488 ----
 results/classifier/005/network/05479587            |   91 -
 results/classifier/005/network/62179944            |   39 -
 results/classifier/005/other/02364653              |  371 -
 results/classifier/005/other/02572177              |  429 --
 results/classifier/005/other/12869209              |   96 -
 results/classifier/005/other/13442371              |  377 -
 results/classifier/005/other/16056596              |  106 -
 results/classifier/005/other/16201167              |  108 -
 results/classifier/005/other/16228234              | 1852 -----
 results/classifier/005/other/17743720              |  779 --
 results/classifier/005/other/21221931              |  336 -
 results/classifier/005/other/21247035              | 1329 ----
 results/classifier/005/other/23300761              |  321 -
 results/classifier/005/other/23448582              |  273 -
 results/classifier/005/other/25892827              | 1085 ---
 results/classifier/005/other/31349848              |  162 -
 results/classifier/005/other/32484936              |  231 -
 results/classifier/005/other/35170175              |  529 --
 results/classifier/005/other/42974450              |  437 --
 results/classifier/005/other/55247116              | 1318 ----
 results/classifier/005/other/55367348              |  540 --
 results/classifier/005/other/55753058              |  301 -
 results/classifier/005/other/56309929              |  188 -
 results/classifier/005/other/56937788              |  352 -
 results/classifier/005/other/57756589              | 1429 ----
 results/classifier/005/other/59540920              |  384 -
 results/classifier/005/other/64571620              |  793 ---
 results/classifier/005/other/65781993              | 2801 --------
 results/classifier/005/other/66743673              |  372 -
 results/classifier/005/other/68897003              |  724 --
 results/classifier/005/other/70021271              | 7456 --------------------
 results/classifier/005/other/70416488              | 1187 ----
 results/classifier/005/other/74715356              |  134 -
 results/classifier/005/other/79834768              |  417 --
 results/classifier/005/other/81775929              |  243 -
 results/classifier/005/other/85542195              |  128 -
 results/classifier/005/other/88225572              | 2908 --------
 results/classifier/005/other/88281850              |  289 -
 results/classifier/005/other/92957605              |  426 --
 results/classifier/005/other/95154278              |  163 -
 results/classifier/005/other/96782458              | 1007 ---
 results/classifier/005/semantic/12360755           |  304 -
 .../005/semantic/gitlab_semantic_addsubps          |   36 -
 .../classifier/005/semantic/gitlab_semantic_adox   |   49 -
 .../classifier/005/semantic/gitlab_semantic_bextr  |   38 -
 .../classifier/005/semantic/gitlab_semantic_blsi   |   33 -
 .../classifier/005/semantic/gitlab_semantic_blsmsk |   40 -
 .../classifier/005/semantic/gitlab_semantic_bzhi   |   51 -
 results/classifier/005/vnc/11357571                |   55 -
 results/classifier/005/vnc/33802194                | 4947 -------------
 results/classifier/005/vnc/42613410                |  157 -
 results/classifier/005/vnc/80570214                |  408 --
 92 files changed, 60192 deletions(-)
 delete mode 100644 results/classifier/005/004-005
 delete mode 100644 results/classifier/005/KVM/04472277
 delete mode 100644 results/classifier/005/KVM/26430026
 delete mode 100644 results/classifier/005/KVM/43643137
 delete mode 100644 results/classifier/005/KVM/71456293
 delete mode 100644 results/classifier/005/KVM/80615920
 delete mode 100644 results/classifier/005/README.md
 delete mode 100644 results/classifier/005/boot/51610399
 delete mode 100644 results/classifier/005/boot/60339453
 delete mode 100644 results/classifier/005/categories.csv
 delete mode 100644 results/classifier/005/device/14488057
 delete mode 100644 results/classifier/005/device/24190340
 delete mode 100644 results/classifier/005/device/24930826
 delete mode 100644 results/classifier/005/device/26095107
 delete mode 100644 results/classifier/005/device/28596630
 delete mode 100644 results/classifier/005/device/36568044
 delete mode 100644 results/classifier/005/device/42226390
 delete mode 100644 results/classifier/005/device/48245039
 delete mode 100644 results/classifier/005/device/57195159
 delete mode 100644 results/classifier/005/device/57231878
 delete mode 100644 results/classifier/005/device/67821138
 delete mode 100644 results/classifier/005/device/99674399
 delete mode 100644 results/classifier/005/graphic/22219210
 delete mode 100644 results/classifier/005/graphic/30680944
 delete mode 100644 results/classifier/005/graphic/46572227
 delete mode 100644 results/classifier/005/graphic/53568181
 delete mode 100644 results/classifier/005/graphic/55961334
 delete mode 100644 results/classifier/005/graphic/73660729
 delete mode 100644 results/classifier/005/instruction/11933524
 delete mode 100644 results/classifier/005/instruction/50773216
 delete mode 100644 results/classifier/005/instruction/63565653
 delete mode 100644 results/classifier/005/instruction/70868267
 delete mode 100644 results/classifier/005/mistranslation/14887122
 delete mode 100644 results/classifier/005/mistranslation/23270873
 delete mode 100644 results/classifier/005/mistranslation/25842545
 delete mode 100644 results/classifier/005/mistranslation/64322995
 delete mode 100644 results/classifier/005/mistranslation/70294255
 delete mode 100644 results/classifier/005/mistranslation/74466963
 delete mode 100644 results/classifier/005/mistranslation/74545755
 delete mode 100644 results/classifier/005/mistranslation/80604314
 delete mode 100644 results/classifier/005/network/05479587
 delete mode 100644 results/classifier/005/network/62179944
 delete mode 100644 results/classifier/005/other/02364653
 delete mode 100644 results/classifier/005/other/02572177
 delete mode 100644 results/classifier/005/other/12869209
 delete mode 100644 results/classifier/005/other/13442371
 delete mode 100644 results/classifier/005/other/16056596
 delete mode 100644 results/classifier/005/other/16201167
 delete mode 100644 results/classifier/005/other/16228234
 delete mode 100644 results/classifier/005/other/17743720
 delete mode 100644 results/classifier/005/other/21221931
 delete mode 100644 results/classifier/005/other/21247035
 delete mode 100644 results/classifier/005/other/23300761
 delete mode 100644 results/classifier/005/other/23448582
 delete mode 100644 results/classifier/005/other/25892827
 delete mode 100644 results/classifier/005/other/31349848
 delete mode 100644 results/classifier/005/other/32484936
 delete mode 100644 results/classifier/005/other/35170175
 delete mode 100644 results/classifier/005/other/42974450
 delete mode 100644 results/classifier/005/other/55247116
 delete mode 100644 results/classifier/005/other/55367348
 delete mode 100644 results/classifier/005/other/55753058
 delete mode 100644 results/classifier/005/other/56309929
 delete mode 100644 results/classifier/005/other/56937788
 delete mode 100644 results/classifier/005/other/57756589
 delete mode 100644 results/classifier/005/other/59540920
 delete mode 100644 results/classifier/005/other/64571620
 delete mode 100644 results/classifier/005/other/65781993
 delete mode 100644 results/classifier/005/other/66743673
 delete mode 100644 results/classifier/005/other/68897003
 delete mode 100644 results/classifier/005/other/70021271
 delete mode 100644 results/classifier/005/other/70416488
 delete mode 100644 results/classifier/005/other/74715356
 delete mode 100644 results/classifier/005/other/79834768
 delete mode 100644 results/classifier/005/other/81775929
 delete mode 100644 results/classifier/005/other/85542195
 delete mode 100644 results/classifier/005/other/88225572
 delete mode 100644 results/classifier/005/other/88281850
 delete mode 100644 results/classifier/005/other/92957605
 delete mode 100644 results/classifier/005/other/95154278
 delete mode 100644 results/classifier/005/other/96782458
 delete mode 100644 results/classifier/005/semantic/12360755
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_addsubps
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_adox
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_bextr
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_blsi
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_blsmsk
 delete mode 100644 results/classifier/005/semantic/gitlab_semantic_bzhi
 delete mode 100644 results/classifier/005/vnc/11357571
 delete mode 100644 results/classifier/005/vnc/33802194
 delete mode 100644 results/classifier/005/vnc/42613410
 delete mode 100644 results/classifier/005/vnc/80570214

(limited to 'results/classifier/005')

diff --git a/results/classifier/005/004-005 b/results/classifier/005/004-005
deleted file mode 100644
index c81de0e2..00000000
--- a/results/classifier/005/004-005
+++ /dev/null
@@ -1,7 +0,0 @@
-6 changes:
-26095107: instruction -> device
-53568181: semantic -> graphic
-96782458: semantic -> other
-46572227: semantic -> graphic
-48245039: assembly -> device
-36568044: mistranslation -> device
diff --git a/results/classifier/005/KVM/04472277 b/results/classifier/005/KVM/04472277
deleted file mode 100644
index e3118005..00000000
--- a/results/classifier/005/KVM/04472277
+++ /dev/null
@@ -1,584 +0,0 @@
-KVM: 0.890
-device: 0.849
-network: 0.847
-graphic: 0.846
-other: 0.846
-instruction: 0.845
-assembly: 0.841
-boot: 0.831
-vnc: 0.828
-socket: 0.824
-mistranslation: 0.817
-semantic: 0.815
-
-[BUG][KVM_SET_USER_MEMORY_REGION] KVM_SET_USER_MEMORY_REGION failed
-
-Hi all,
-I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
-Is there any one know this?
-The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
-```
-2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
-kvm_set_phys_mem: error registering slot: Invalid argument
-2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
-```
-The xml file
-```
-root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
-<!--
-WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
-OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
-  virsh edit instance-0000000e
-or other application using the libvirt API.
--->
-<domain type='kvm'>
-  <name>instance-0000000e</name>
-  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
-  <metadata>
-    <nova:instance xmlns:nova="
-http://openstack.org/xmlns/libvirt/nova/1.1
-">
-      <nova:package version="25.1.0"/>
-      <nova:name>provider-instance</nova:name>
-      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
-      <nova:flavor name="cirros-os-dpu-test-1">
-        <nova:memory>64</nova:memory>
-        <nova:disk>1</nova:disk>
-        <nova:swap>0</nova:swap>
-        <nova:ephemeral>0</nova:ephemeral>
-        <nova:vcpus>1</nova:vcpus>
-      </nova:flavor>
-      <nova:owner>
-        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
-        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
-      </nova:owner>
-      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
-      <nova:ports>
-        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
-          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
-        </nova:port>
-      </nova:ports>
-    </nova:instance>
-  </metadata>
-  <memory unit='KiB'>65536</memory>
-  <currentMemory unit='KiB'>65536</currentMemory>
-  <vcpu placement='static'>1</vcpu>
-  <sysinfo type='smbios'>
-    <system>
-      <entry name='manufacturer'>OpenStack Foundation</entry>
-      <entry name='product'>OpenStack Nova</entry>
-      <entry name='version'>25.1.0</entry>
-      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='family'>Virtual Machine</entry>
-    </system>
-  </sysinfo>
-  <os>
-    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
-    <boot dev='hd'/>
-    <smbios mode='sysinfo'/>
-  </os>
-  <features>
-    <acpi/>
-    <apic/>
-    <vmcoreinfo state='on'/>
-  </features>
-  <cpu mode='host-model' check='partial'>
-    <topology sockets='1' dies='1' cores='1' threads='1'/>
-  </cpu>
-  <clock offset='utc'>
-    <timer name='pit' tickpolicy='delay'/>
-    <timer name='rtc' tickpolicy='catchup'/>
-    <timer name='hpet' present='no'/>
-  </clock>
-  <on_poweroff>destroy</on_poweroff>
-  <on_reboot>restart</on_reboot>
-  <on_crash>destroy</on_crash>
-  <devices>
-    <emulator>/usr/bin/qemu-system-x86_64</emulator>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='none'/>
-      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
-      <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
-    </disk>
-    <controller type='usb' index='0' model='piix3-uhci'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
-    </controller>
-    <controller type='pci' index='0' model='pci-root'/>
-    <interface type='hostdev' managed='yes'>
-      <mac address='fa:16:3e:aa:d9:23'/>
-      <source>
-        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
-    </interface>
-    <serial type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='isa-serial' port='0'>
-        <model name='isa-serial'/>
-      </target>
-    </serial>
-    <console type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='serial' port='0'/>
-    </console>
-    <input type='tablet' bus='usb'>
-      <address type='usb' bus='0' port='1'/>
-    </input>
-    <input type='mouse' bus='ps2'/>
-    <input type='keyboard' bus='ps2'/>
-    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
-      <listen type='address' address='0.0.0.0'/>
-    </graphics>
-    <audio id='1' type='none'/>
-    <video>
-      <model type='virtio' heads='1' primary='yes'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
-    </video>
-    <hostdev mode='subsystem' type='pci' managed='yes'>
-      <source>
-        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
-    </hostdev>
-    <memballoon model='virtio'>
-      <stats period='10'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
-    </memballoon>
-    <rng model='virtio'>
-      <backend model='random'>/dev/urandom</backend>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
-    </rng>
-  </devices>
-</domain>
-```
-----
-Simon Jones
-
-This is happened in ubuntu22.04.
-QEMU is install by apt like this:
-apt install -y qemu qemu-kvm qemu-system
-and QEMU version is 6.2.0
-----
-Simon Jones
-Simon Jones <
-batmanustc@gmail.com
-> 于2023年3月21日周二 08:40写道：
-Hi all,
-I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
-Is there any one know this?
-The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
-```
-2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
-kvm_set_phys_mem: error registering slot: Invalid argument
-2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
-```
-The xml file
-```
-root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
-<!--
-WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
-OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
-  virsh edit instance-0000000e
-or other application using the libvirt API.
--->
-<domain type='kvm'>
-  <name>instance-0000000e</name>
-  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
-  <metadata>
-    <nova:instance xmlns:nova="
-http://openstack.org/xmlns/libvirt/nova/1.1
-">
-      <nova:package version="25.1.0"/>
-      <nova:name>provider-instance</nova:name>
-      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
-      <nova:flavor name="cirros-os-dpu-test-1">
-        <nova:memory>64</nova:memory>
-        <nova:disk>1</nova:disk>
-        <nova:swap>0</nova:swap>
-        <nova:ephemeral>0</nova:ephemeral>
-        <nova:vcpus>1</nova:vcpus>
-      </nova:flavor>
-      <nova:owner>
-        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
-        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
-      </nova:owner>
-      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
-      <nova:ports>
-        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
-          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
-        </nova:port>
-      </nova:ports>
-    </nova:instance>
-  </metadata>
-  <memory unit='KiB'>65536</memory>
-  <currentMemory unit='KiB'>65536</currentMemory>
-  <vcpu placement='static'>1</vcpu>
-  <sysinfo type='smbios'>
-    <system>
-      <entry name='manufacturer'>OpenStack Foundation</entry>
-      <entry name='product'>OpenStack Nova</entry>
-      <entry name='version'>25.1.0</entry>
-      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='family'>Virtual Machine</entry>
-    </system>
-  </sysinfo>
-  <os>
-    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
-    <boot dev='hd'/>
-    <smbios mode='sysinfo'/>
-  </os>
-  <features>
-    <acpi/>
-    <apic/>
-    <vmcoreinfo state='on'/>
-  </features>
-  <cpu mode='host-model' check='partial'>
-    <topology sockets='1' dies='1' cores='1' threads='1'/>
-  </cpu>
-  <clock offset='utc'>
-    <timer name='pit' tickpolicy='delay'/>
-    <timer name='rtc' tickpolicy='catchup'/>
-    <timer name='hpet' present='no'/>
-  </clock>
-  <on_poweroff>destroy</on_poweroff>
-  <on_reboot>restart</on_reboot>
-  <on_crash>destroy</on_crash>
-  <devices>
-    <emulator>/usr/bin/qemu-system-x86_64</emulator>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='none'/>
-      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
-      <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
-    </disk>
-    <controller type='usb' index='0' model='piix3-uhci'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
-    </controller>
-    <controller type='pci' index='0' model='pci-root'/>
-    <interface type='hostdev' managed='yes'>
-      <mac address='fa:16:3e:aa:d9:23'/>
-      <source>
-        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
-    </interface>
-    <serial type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='isa-serial' port='0'>
-        <model name='isa-serial'/>
-      </target>
-    </serial>
-    <console type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='serial' port='0'/>
-    </console>
-    <input type='tablet' bus='usb'>
-      <address type='usb' bus='0' port='1'/>
-    </input>
-    <input type='mouse' bus='ps2'/>
-    <input type='keyboard' bus='ps2'/>
-    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
-      <listen type='address' address='0.0.0.0'/>
-    </graphics>
-    <audio id='1' type='none'/>
-    <video>
-      <model type='virtio' heads='1' primary='yes'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
-    </video>
-    <hostdev mode='subsystem' type='pci' managed='yes'>
-      <source>
-        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
-    </hostdev>
-    <memballoon model='virtio'>
-      <stats period='10'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
-    </memballoon>
-    <rng model='virtio'>
-      <backend model='random'>/dev/urandom</backend>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
-    </rng>
-  </devices>
-</domain>
-```
-----
-Simon Jones
-
-This is full ERROR log
-2023-03-23 08:00:52.362+0000: starting up libvirt version: 8.0.0, package: 1ubuntu7.4 (Christian Ehrhardt <
-christian.ehrhardt@canonical.com
-> Tue, 22 Nov 2022 15:59:28 +0100), qemu version: 6.2.0Debian 1:6.2+dfsg-2ubuntu6.6, kernel: 5.19.0-35-generic, hostname: c1c2
-LC_ALL=C \
-PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin \
-HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e \
-XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.local/share \
-XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.cache \
-XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.config \
-/usr/bin/qemu-system-x86_64 \
--name guest=instance-0000000e,debug-threads=on \
--S \
--object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-4-instance-0000000e/master-key.aes"}' \
--machine pc-i440fx-6.2,usb=off,dump-guest-core=off,memory-backend=pc.ram \
--accel kvm \
--cpu Cooperlake,ss=on,vmx=on,pdcm=on,hypervisor=on,tsc-adjust=on,sha-ni=on,umip=on,waitpkg=on,gfni=on,vaes=on,vpclmulqdq=on,rdpid=on,movdiri=on,movdir64b=on,fsrm=on,md-clear=on,avx-vnni=on,xsaves=on,ibpb=on,ibrs=on,amd-stibp=on,amd-ssbd=on,hle=off,rtm=off,avx512f=off,avx512dq=off,avx512cd=off,avx512bw=off,avx512vl=off,avx512vnni=off,avx512-bf16=off,taa-no=off \
--m 64 \
--object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":67108864}' \
--overcommit mem-lock=off \
--smp 1,sockets=1,dies=1,cores=1,threads=1 \
--uuid ff91d2dc-69a1-43ef-abde-c9e4e9a0305b \
--smbios 'type=1,manufacturer=OpenStack Foundation,product=OpenStack Nova,version=25.1.0,serial=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,uuid=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,family=Virtual Machine' \
--no-user-config \
--nodefaults \
--chardev socket,id=charmonitor,fd=33,server=on,wait=off \
--mon chardev=charmonitor,id=monitor,mode=control \
--rtc base=utc,driftfix=slew \
--global kvm-pit.lost_tick_policy=delay \
--no-hpet \
--no-shutdown \
--boot strict=on \
--device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
--blockdev '{"driver":"file","filename":"/var/lib/nova/instances/_base/8b58db82a488248e7c5e769599954adaa47a5314","node-name":"libvirt-2-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
--blockdev '{"node-name":"libvirt-2-format","read-only":true,"cache":{"direct":true,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \
--blockdev '{"driver":"file","filename":"/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk","node-name":"libvirt-1-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
--blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":"libvirt-2-format"}' \
--device virtio-blk-pci,bus=pci.0,addr=0x3,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=on \
--add-fd set=1,fd=34 \
--chardev pty,id=charserial0,logfile=/dev/fdset/1,logappend=on \
--device isa-serial,chardev=charserial0,id=serial0 \
--device usb-tablet,id=input0,bus=usb.0,port=1 \
--audiodev '{"id":"audio1","driver":"none"}' \
--vnc
-0.0.0.0:0
-,audiodev=audio1 \
--device virtio-vga,id=video0,max_outputs=1,bus=pci.0,addr=0x2 \
--device vfio-pci,host=0000:01:00.5,id=hostdev0,bus=pci.0,addr=0x4 \
--device vfio-pci,host=0000:01:00.6,id=hostdev1,bus=pci.0,addr=0x5 \
--device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \
--object '{"qom-type":"rng-random","id":"objrng0","filename":"/dev/urandom"}' \
--device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 \
--device vmcoreinfo \
--sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
--msg timestamp=on
-char device redirected to /dev/pts/3 (label charserial0)
-2023-03-23T08:00:53.728550Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
-kvm_set_phys_mem: error registering slot: Invalid argument
-2023-03-23 08:00:54.201+0000: shutting down, reason=crashed
-2023-03-23 08:54:43.468+0000: starting up libvirt version: 8.0.0, package: 1ubuntu7.4 (Christian Ehrhardt <
-christian.ehrhardt@canonical.com
-> Tue, 22 Nov 2022 15:59:28 +0100), qemu version: 6.2.0Debian 1:6.2+dfsg-2ubuntu6.6, kernel: 5.19.0-35-generic, hostname: c1c2
-LC_ALL=C \
-PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin \
-HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e \
-XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.local/share \
-XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.cache \
-XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.config \
-/usr/bin/qemu-system-x86_64 \
--name guest=instance-0000000e,debug-threads=on \
--S \
--object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-5-instance-0000000e/master-key.aes"}' \
--machine pc-i440fx-6.2,usb=off,dump-guest-core=off,memory-backend=pc.ram \
--accel kvm \
--cpu Cooperlake,ss=on,vmx=on,pdcm=on,hypervisor=on,tsc-adjust=on,sha-ni=on,umip=on,waitpkg=on,gfni=on,vaes=on,vpclmulqdq=on,rdpid=on,movdiri=on,movdir64b=on,fsrm=on,md-clear=on,avx-vnni=on,xsaves=on,ibpb=on,ibrs=on,amd-stibp=on,amd-ssbd=on,hle=off,rtm=off,avx512f=off,avx512dq=off,avx512cd=off,avx512bw=off,avx512vl=off,avx512vnni=off,avx512-bf16=off,taa-no=off \
--m 64 \
--object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":67108864}' \
--overcommit mem-lock=off \
--smp 1,sockets=1,dies=1,cores=1,threads=1 \
--uuid ff91d2dc-69a1-43ef-abde-c9e4e9a0305b \
--smbios 'type=1,manufacturer=OpenStack Foundation,product=OpenStack Nova,version=25.1.0,serial=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,uuid=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,family=Virtual Machine' \
--no-user-config \
--nodefaults \
--chardev socket,id=charmonitor,fd=33,server=on,wait=off \
--mon chardev=charmonitor,id=monitor,mode=control \
--rtc base=utc,driftfix=slew \
--global kvm-pit.lost_tick_policy=delay \
--no-hpet \
--no-shutdown \
--boot strict=on \
--device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
--blockdev '{"driver":"file","filename":"/var/lib/nova/instances/_base/8b58db82a488248e7c5e769599954adaa47a5314","node-name":"libvirt-2-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
--blockdev '{"node-name":"libvirt-2-format","read-only":true,"cache":{"direct":true,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \
--blockdev '{"driver":"file","filename":"/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk","node-name":"libvirt-1-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
--blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":"libvirt-2-format"}' \
--device virtio-blk-pci,bus=pci.0,addr=0x3,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=on \
--add-fd set=1,fd=34 \
--chardev pty,id=charserial0,logfile=/dev/fdset/1,logappend=on \
--device isa-serial,chardev=charserial0,id=serial0 \
--device usb-tablet,id=input0,bus=usb.0,port=1 \
--audiodev '{"id":"audio1","driver":"none"}' \
--vnc
-0.0.0.0:0
-,audiodev=audio1 \
--device virtio-vga,id=video0,max_outputs=1,bus=pci.0,addr=0x2 \
--device vfio-pci,host=0000:01:00.5,id=hostdev0,bus=pci.0,addr=0x4 \
--device vfio-pci,host=0000:01:00.6,id=hostdev1,bus=pci.0,addr=0x5 \
--device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \
--object '{"qom-type":"rng-random","id":"objrng0","filename":"/dev/urandom"}' \
--device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 \
--device vmcoreinfo \
--sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
--msg timestamp=on
-char device redirected to /dev/pts/3 (label charserial0)
-2023-03-23T08:54:44.755039Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
-kvm_set_phys_mem: error registering slot: Invalid argument
-2023-03-23 08:54:45.230+0000: shutting down, reason=crashed
-----
-Simon Jones
-Simon Jones <
-batmanustc@gmail.com
-> 于2023年3月23日周四 05:49写道：
-This is happened in ubuntu22.04.
-QEMU is install by apt like this:
-apt install -y qemu qemu-kvm qemu-system
-and QEMU version is 6.2.0
-----
-Simon Jones
-Simon Jones <
-batmanustc@gmail.com
-> 于2023年3月21日周二 08:40写道：
-Hi all,
-I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
-Is there any one know this?
-The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
-```
-2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
-kvm_set_phys_mem: error registering slot: Invalid argument
-2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
-```
-The xml file
-```
-root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
-<!--
-WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
-OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
-  virsh edit instance-0000000e
-or other application using the libvirt API.
--->
-<domain type='kvm'>
-  <name>instance-0000000e</name>
-  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
-  <metadata>
-    <nova:instance xmlns:nova="
-http://openstack.org/xmlns/libvirt/nova/1.1
-">
-      <nova:package version="25.1.0"/>
-      <nova:name>provider-instance</nova:name>
-      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
-      <nova:flavor name="cirros-os-dpu-test-1">
-        <nova:memory>64</nova:memory>
-        <nova:disk>1</nova:disk>
-        <nova:swap>0</nova:swap>
-        <nova:ephemeral>0</nova:ephemeral>
-        <nova:vcpus>1</nova:vcpus>
-      </nova:flavor>
-      <nova:owner>
-        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
-        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
-      </nova:owner>
-      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
-      <nova:ports>
-        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
-          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
-        </nova:port>
-      </nova:ports>
-    </nova:instance>
-  </metadata>
-  <memory unit='KiB'>65536</memory>
-  <currentMemory unit='KiB'>65536</currentMemory>
-  <vcpu placement='static'>1</vcpu>
-  <sysinfo type='smbios'>
-    <system>
-      <entry name='manufacturer'>OpenStack Foundation</entry>
-      <entry name='product'>OpenStack Nova</entry>
-      <entry name='version'>25.1.0</entry>
-      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
-      <entry name='family'>Virtual Machine</entry>
-    </system>
-  </sysinfo>
-  <os>
-    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
-    <boot dev='hd'/>
-    <smbios mode='sysinfo'/>
-  </os>
-  <features>
-    <acpi/>
-    <apic/>
-    <vmcoreinfo state='on'/>
-  </features>
-  <cpu mode='host-model' check='partial'>
-    <topology sockets='1' dies='1' cores='1' threads='1'/>
-  </cpu>
-  <clock offset='utc'>
-    <timer name='pit' tickpolicy='delay'/>
-    <timer name='rtc' tickpolicy='catchup'/>
-    <timer name='hpet' present='no'/>
-  </clock>
-  <on_poweroff>destroy</on_poweroff>
-  <on_reboot>restart</on_reboot>
-  <on_crash>destroy</on_crash>
-  <devices>
-    <emulator>/usr/bin/qemu-system-x86_64</emulator>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='none'/>
-      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
-      <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
-    </disk>
-    <controller type='usb' index='0' model='piix3-uhci'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
-    </controller>
-    <controller type='pci' index='0' model='pci-root'/>
-    <interface type='hostdev' managed='yes'>
-      <mac address='fa:16:3e:aa:d9:23'/>
-      <source>
-        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
-    </interface>
-    <serial type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='isa-serial' port='0'>
-        <model name='isa-serial'/>
-      </target>
-    </serial>
-    <console type='pty'>
-      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
-      <target type='serial' port='0'/>
-    </console>
-    <input type='tablet' bus='usb'>
-      <address type='usb' bus='0' port='1'/>
-    </input>
-    <input type='mouse' bus='ps2'/>
-    <input type='keyboard' bus='ps2'/>
-    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
-      <listen type='address' address='0.0.0.0'/>
-    </graphics>
-    <audio id='1' type='none'/>
-    <video>
-      <model type='virtio' heads='1' primary='yes'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
-    </video>
-    <hostdev mode='subsystem' type='pci' managed='yes'>
-      <source>
-        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
-      </source>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
-    </hostdev>
-    <memballoon model='virtio'>
-      <stats period='10'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
-    </memballoon>
-    <rng model='virtio'>
-      <backend model='random'>/dev/urandom</backend>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
-    </rng>
-  </devices>
-</domain>
-```
-----
-Simon Jones
-
diff --git a/results/classifier/005/KVM/26430026 b/results/classifier/005/KVM/26430026
deleted file mode 100644
index 8db2ac74..00000000
--- a/results/classifier/005/KVM/26430026
+++ /dev/null
@@ -1,173 +0,0 @@
-KVM: 0.919
-mistranslation: 0.915
-semantic: 0.904
-device: 0.904
-assembly: 0.896
-vnc: 0.893
-instruction: 0.888
-graphic: 0.862
-boot: 0.841
-socket: 0.817
-other: 0.813
-network: 0.758
-
-[BUG] cxl,i386: e820 mappings may not be correct for cxl
-
-Context included below from prior discussion
-    - `cxl create-region` would fail on inability to allocate memory
-    - traced this down to the memory region being marked RESERVED
-    - E820 map marks the CXL fixed memory window as RESERVED
-
-
-Re: x86 errors, I found that region worked with this patch. (I also
-added the SRAT patches the Davidlohr posted, but I do not think they are
-relevant).
-
-I don't think this is correct, and setting this to E820_RAM causes the
-system to fail to boot at all, but with this change `cxl create-region`
-succeeds, which suggests our e820 mappings in the i386 machine are
-incorrect.
-
-Anyone who can help or have an idea as to what e820 should actually be
-doing with this region, or if this is correct and something else is
-failing, please help!
-
-
-diff --git a/hw/i386/pc.c b/hw/i386/pc.c
-index 566accf7e6..a5e688a742 100644
---- a/hw/i386/pc.c
-+++ b/hw/i386/pc.c
-@@ -1077,7 +1077,7 @@ void pc_memory_init(PCMachineState *pcms,
-                 memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
-                                       "cxl-fixed-memory-region", fw->size);
-                 memory_region_add_subregion(system_memory, fw->base, &fw->mr);
--                e820_add_entry(fw->base, fw->size, E820_RESERVED);
-+                e820_add_entry(fw->base, fw->size, E820_NVS);
-                 cxl_fmw_base += fw->size;
-                 cxl_resv_end = cxl_fmw_base;
-             }
-
-
-On Mon, Oct 10, 2022 at 05:32:42PM +0100, Jonathan Cameron wrote:
->
->
-> > but i'm not sure of what to do with this info.  We have some proof
->
-> > that real hardware works with this no problem, and the only difference
->
-> > is that the EFI/bios/firmware is setting the memory regions as `usable`
->
-> > or `soft reserved`, which would imply the EDK2 is the blocker here
->
-> > regardless of the OS driver status.
->
-> >
->
-> > But I'd seen elsewhere you had gotten some of this working, and I'm
->
-> > failing to get anything working at the moment.  If you have any input i
->
-> > would greatly appreciate the help.
->
-> >
->
-> > QEMU config:
->
-> >
->
-> > /opt/qemu-cxl2/bin/qemu-system-x86_64 \
->
-> > -drive
->
-> > file=/var/lib/libvirt/images/cxl.qcow2,format=qcow2,index=0,media=d\
->
-> > -m 2G,slots=4,maxmem=4G \
->
-> > -smp 4 \
->
-> > -machine type=q35,accel=kvm,cxl=on \
->
-> > -enable-kvm \
->
-> > -nographic \
->
-> > -device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 \
->
-> > -device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 \
->
-> > -object memory-backend-file,id=cxl-mem0,mem-path=/tmp/cxl-mem0,size=256M \
->
-> > -object memory-backend-file,id=lsa0,mem-path=/tmp/cxl-lsa0,size=256M \
->
-> > -device cxl-type3,bus=rp0,pmem=true,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0
->
-> > \
->
-> > -M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=256M
->
-> >
->
-> > I'd seen on the lists that you had seen issues with single-rp setups,
->
-> > but no combination of configuration I've tried (including all the ones
->
-> > in the docs and tests) lead to a successful region creation with
->
-> > `cxl create-region`
->
->
->
-> Hmm. Let me have a play.  I've not run x86 tests for a while so
->
-> perhaps something is missing there.
->
->
->
-> I'm carrying a patch to override check_last_peer() in
->
-> cxl_port_setup_targets() as that is wrong for some combinations,
->
-> but that doesn't look like it's related to what you are seeing.
->
->
-I'm not sure if it's relevant, but turned out I'd forgotten I'm carrying 3
->
-patches that aren't upstream (and one is a horrible hack).
->
->
-Hack:
-https://lore.kernel.org/linux-cxl/20220819094655.000005ed@huawei.com/
->
-Shouldn't affect a simple case like this...
->
->
-https://lore.kernel.org/linux-cxl/20220819093133.00006c22@huawei.com/T/#t
->
-(Dan's version)
->
->
-https://lore.kernel.org/linux-cxl/20220815154044.24733-1-Jonathan.Cameron@huawei.com/T/#t
->
->
-For writes to work you will currently need two rps (nothing on the second is
->
-fine)
->
-as we still haven't resolved if the kernel should support an HDM decoder on
->
-a host bridge with one port.  I think it should (Spec allows it), others
->
-unconvinced.
->
->
-Note I haven't shifted over to x86 yet so may still be something different
->
-from
->
-arm64.
->
->
-Jonathan
->
->
-
diff --git a/results/classifier/005/KVM/43643137 b/results/classifier/005/KVM/43643137
deleted file mode 100644
index 0ce14b08..00000000
--- a/results/classifier/005/KVM/43643137
+++ /dev/null
@@ -1,546 +0,0 @@
-KVM: 0.794
-other: 0.781
-semantic: 0.764
-device: 0.760
-instruction: 0.754
-vnc: 0.742
-assembly: 0.727
-graphic: 0.721
-network: 0.709
-socket: 0.674
-mistranslation: 0.665
-boot: 0.652
-
-[Qemu-devel] [BUG/RFC] INIT IPI lost when VM starts
-
-Hi,
-We encountered a problem that when a domain starts, seabios failed to online a 
-vCPU.
-
-After investigation, we found that the reason is in kvm-kmod, KVM_APIC_INIT bit 
-in
-vcpu->arch.apic->pending_events was overwritten by qemu, and thus an INIT IPI 
-sent
-to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp command 
-to qemu
-on VM start.
-
-In qemu, qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
-do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from kvm-kmod and
-sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
-kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus pending_events is
-overwritten by qemu.
-
-I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true after 
-‘query-cpus’,
-and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am not sure 
-whether
-it is OK for qemu to set cpu->kvm_vcpu_dirty in do_kvm_cpu_synchronize_state in 
-each caller.
-
-What’s your opinion?
-
-Let me clarify it more clearly. Time sequence is that qemu handles ‘query-cpus’ qmp 
-command, vcpu 1 (and vcpu 0) got registers from kvm-kmod (qmp_query_cpus-> 
-cpu_synchronize_state-> kvm_cpu_synchronize_state->
-> do_kvm_cpu_synchronize_state-> kvm_arch_get_registers), then vcpu 0 (BSP) 
-sends INIT-SIPI to vcpu 1(AP). In kvm-kmod, vcpu 1’s pending_events’s KVM_APIC_INIT 
-bit set.
-Then vcpu 1 continue running, vcpu1 thread in qemu calls 
-kvm_arch_put_registers-> kvm_put_vcpu_events, so KVM_APIC_INIT bit in vcpu 1’s 
-pending_events got cleared, i.e., lost.
-
-In kvm-kmod, except for pending_events, sipi_vector may also be overwritten., 
-so I am not sure if there are other fields/registers in danger, i.e., those may 
-be modified asynchronously with vcpu thread itself.
-
-BTW, using a sleep like following can reliably reproduce this problem, if VM 
-equipped with more than 2 vcpus and starting VM using libvirtd.
-
-diff --git a/target/i386/kvm.c b/target/i386/kvm.c
-index 55865db..5099290 100644
---- a/target/i386/kvm.c
-+++ b/target/i386/kvm.c
-@@ -2534,6 +2534,11 @@ static int kvm_put_vcpu_events(X86CPU *cpu, int level)
-             KVM_VCPUEVENT_VALID_NMI_PENDING | KVM_VCPUEVENT_VALID_SIPI_VECTOR;
-     }
-
-+    if (CPU(cpu)->cpu_index == 1) {
-+        fprintf(stderr, "vcpu 1 sleep!!!!\n");
-+        sleep(10);
-+    }
-+
-     return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_VCPU_EVENTS, &events);
- }
-
-
-On 2017/3/20 22:21, Herongguang (Stephen) wrote:
-Hi,
-We encountered a problem that when a domain starts, seabios failed to online a 
-vCPU.
-
-After investigation, we found that the reason is in kvm-kmod, KVM_APIC_INIT bit 
-in
-vcpu->arch.apic->pending_events was overwritten by qemu, and thus an INIT IPI 
-sent
-to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp command 
-to qemu
-on VM start.
-
-In qemu, qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
-do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from kvm-kmod and
-sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
-kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus pending_events is
-overwritten by qemu.
-
-I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true after 
-‘query-cpus’,
-and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am not sure 
-whether
-it is OK for qemu to set cpu->kvm_vcpu_dirty in do_kvm_cpu_synchronize_state in 
-each caller.
-
-What’s your opinion?
-
-On 20/03/2017 15:21, Herongguang (Stephen) wrote:
->
->
-We encountered a problem that when a domain starts, seabios failed to
->
-online a vCPU.
->
->
-After investigation, we found that the reason is in kvm-kmod,
->
-KVM_APIC_INIT bit in
->
-vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
->
-INIT IPI sent
->
-to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
->
-command to qemu
->
-on VM start.
->
->
-In qemu, qmp_query_cpus-> cpu_synchronize_state->
->
-kvm_cpu_synchronize_state->
->
-do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
->
-kvm-kmod and
->
-sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
->
-kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
->
-pending_events is
->
-overwritten by qemu.
->
->
-I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
->
-after ‘query-cpus’,
->
-and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
->
-not sure whether
->
-it is OK for qemu to set cpu->kvm_vcpu_dirty in
->
-do_kvm_cpu_synchronize_state in each caller.
->
->
-What’s your opinion?
-Hi Rongguang,
-
-sorry for the late response.
-
-Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear the
-bit, but the result of the INIT is stored in mp_state.
-
-kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
-KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
-it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
-but I would like to understand the exact sequence of events.
-
-Thanks,
-
-paolo
-
-On 2017/4/6 0:16, Paolo Bonzini wrote:
-On 20/03/2017 15:21, Herongguang (Stephen) wrote:
-We encountered a problem that when a domain starts, seabios failed to
-online a vCPU.
-
-After investigation, we found that the reason is in kvm-kmod,
-KVM_APIC_INIT bit in
-vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
-INIT IPI sent
-to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
-command to qemu
-on VM start.
-
-In qemu, qmp_query_cpus-> cpu_synchronize_state->
-kvm_cpu_synchronize_state->
-do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
-kvm-kmod and
-sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
-kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
-pending_events is
-overwritten by qemu.
-
-I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
-after ‘query-cpus’,
-and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
-not sure whether
-it is OK for qemu to set cpu->kvm_vcpu_dirty in
-do_kvm_cpu_synchronize_state in each caller.
-
-What’s your opinion?
-Hi Rongguang,
-
-sorry for the late response.
-
-Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear the
-bit, but the result of the INIT is stored in mp_state.
-It's dropped in KVM_SET_VCPU_EVENTS, see below.
-kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
-KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
-it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
-but I would like to understand the exact sequence of events.
-time0:
-vcpu1:
-qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
-> do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to true)-> 
-kvm_arch_get_registers(KVM_APIC_INIT bit in vcpu->arch.apic->pending_events was not set)
-
-time1:
-vcpu0:
-send INIT-SIPI to all AP->(in vcpu 0's context)__apic_accept_irq(KVM_APIC_INIT bit 
-in vcpu1's arch.apic->pending_events is set)
-
-time2:
-vcpu1:
-kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is 
-true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten KVM_APIC_INIT bit in 
-vcpu->arch.apic->pending_events!)
-
-So it's a race between vcpu1 get/put registers with kvm/other vcpus changing 
-vcpu1's status/structure fields in the mean time, I am in worry of if there are 
-other fields may be overwritten,
-sipi_vector is one.
-
-also see:
-https://www.mail-archive.com/address@hidden/msg438675.html
-Thanks,
-
-paolo
-
-.
-
-Hi Paolo,
-
-What's your opinion about this patch? We found it just before finishing patches 
-for the past two days.
-
-
-Thanks,
--Gonglei
-
-
->
------Original Message-----
->
-From: address@hidden [
-mailto:address@hidden
-On
->
-Behalf Of Herongguang (Stephen)
->
-Sent: Thursday, April 06, 2017 9:47 AM
->
-To: Paolo Bonzini; address@hidden; address@hidden;
->
-address@hidden; address@hidden; address@hidden;
->
-wangxin (U); Huangweidong (C)
->
-Subject: Re: [BUG/RFC] INIT IPI lost when VM starts
->
->
->
->
-On 2017/4/6 0:16, Paolo Bonzini wrote:
->
->
->
-> On 20/03/2017 15:21, Herongguang (Stephen) wrote:
->
->> We encountered a problem that when a domain starts, seabios failed to
->
->> online a vCPU.
->
->>
->
->> After investigation, we found that the reason is in kvm-kmod,
->
->> KVM_APIC_INIT bit in
->
->> vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
->
->> INIT IPI sent
->
->> to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
->
->> command to qemu
->
->> on VM start.
->
->>
->
->> In qemu, qmp_query_cpus-> cpu_synchronize_state->
->
->> kvm_cpu_synchronize_state->
->
->> do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
->
->> kvm-kmod and
->
->> sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
->
->> kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
->
->> pending_events is
->
->> overwritten by qemu.
->
->>
->
->> I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
->
->> after ‘query-cpus’,
->
->> and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
->
->> not sure whether
->
->> it is OK for qemu to set cpu->kvm_vcpu_dirty in
->
->> do_kvm_cpu_synchronize_state in each caller.
->
->>
->
->> What’s your opinion?
->
-> Hi Rongguang,
->
->
->
-> sorry for the late response.
->
->
->
-> Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear
->
-the
->
-> bit, but the result of the INIT is stored in mp_state.
->
->
-It's dropped in KVM_SET_VCPU_EVENTS, see below.
->
->
->
->
-> kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
->
-> KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
->
-> it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
->
-> but I would like to understand the exact sequence of events.
->
->
-time0:
->
-vcpu1:
->
-qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
->
-> do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to
->
-true)-> kvm_arch_get_registers(KVM_APIC_INIT bit in
->
-vcpu->arch.apic->pending_events was not set)
->
->
-time1:
->
-vcpu0:
->
-send INIT-SIPI to all AP->(in vcpu 0's
->
-context)__apic_accept_irq(KVM_APIC_INIT bit in vcpu1's
->
-arch.apic->pending_events is set)
->
->
-time2:
->
-vcpu1:
->
-kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is
->
-true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten
->
-KVM_APIC_INIT bit in vcpu->arch.apic->pending_events!)
->
->
-So it's a race between vcpu1 get/put registers with kvm/other vcpus changing
->
-vcpu1's status/structure fields in the mean time, I am in worry of if there
->
-are
->
-other fields may be overwritten,
->
-sipi_vector is one.
->
->
-also see:
->
-https://www.mail-archive.com/address@hidden/msg438675.html
->
->
-> Thanks,
->
->
->
-> paolo
->
->
->
-> .
->
->
->
-
-2017-11-20 06:57+0000, Gonglei (Arei):
->
-Hi Paolo,
->
->
-What's your opinion about this patch? We found it just before finishing
->
-patches
->
-for the past two days.
-I think your case was fixed by f4ef19108608 ("KVM: X86: Fix loss of
-pending INIT due to race"), but that patch didn't fix it perfectly, so
-maybe you're hitting a similar case that happens in SMM ...
-
->
-> -----Original Message-----
->
-> From: address@hidden [
-mailto:address@hidden
-On
->
-> Behalf Of Herongguang (Stephen)
->
-> On 2017/4/6 0:16, Paolo Bonzini wrote:
->
-> > Hi Rongguang,
->
-> >
->
-> > sorry for the late response.
->
-> >
->
-> > Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear
->
-> the
->
-> > bit, but the result of the INIT is stored in mp_state.
->
->
->
-> It's dropped in KVM_SET_VCPU_EVENTS, see below.
->
->
->
-> >
->
-> > kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
->
-> > KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
->
-> > it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
->
-> > but I would like to understand the exact sequence of events.
->
->
->
-> time0:
->
-> vcpu1:
->
-> qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
->
->  > do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to
->
-> true)-> kvm_arch_get_registers(KVM_APIC_INIT bit in
->
-> vcpu->arch.apic->pending_events was not set)
->
->
->
-> time1:
->
-> vcpu0:
->
-> send INIT-SIPI to all AP->(in vcpu 0's
->
-> context)__apic_accept_irq(KVM_APIC_INIT bit in vcpu1's
->
-> arch.apic->pending_events is set)
->
->
->
-> time2:
->
-> vcpu1:
->
-> kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is
->
-> true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten
->
-> KVM_APIC_INIT bit in vcpu->arch.apic->pending_events!)
->
->
->
-> So it's a race between vcpu1 get/put registers with kvm/other vcpus changing
->
-> vcpu1's status/structure fields in the mean time, I am in worry of if there
->
-> are
->
-> other fields may be overwritten,
->
-> sipi_vector is one.
-Fields that can be asynchronously written by other VCPUs (like SIPI,
-NMI) must not be SET if other VCPUs were not paused since the last GET.
-(Looking at the interface, we can currently lose pending SMI.)
-
-INIT is one of the restricted fields, but the API unconditionally
-couples SMM with latched INIT, which means that we can lose an INIT if
-the VCPU is in SMM mode -- do you see SMM in kvm_vcpu_events?
-
-Thanks.
-
diff --git a/results/classifier/005/KVM/71456293 b/results/classifier/005/KVM/71456293
deleted file mode 100644
index 4f5d04ac..00000000
--- a/results/classifier/005/KVM/71456293
+++ /dev/null
@@ -1,1494 +0,0 @@
-KVM: 0.691
-mistranslation: 0.659
-vnc: 0.625
-instruction: 0.624
-graphic: 0.603
-assembly: 0.602
-device: 0.601
-semantic: 0.600
-other: 0.598
-boot: 0.598
-socket: 0.596
-network: 0.491
-
-[Qemu-devel][bug] qemu crash when migrate vm and vm's disks
-
-When migrate vm and vm’s disks target host qemu crash due to an invalid free.
-#0  object_unref (obj=0x1000) at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
-#1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
-at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
-#2  flatview_destroy (view=0x560439653880) at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
-#3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
-at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
-#4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
-#5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
-test base qemu-2.12.0
-，
-but use lastest qemu(v6.0.0-rc2) also reproduce.
-As follow patch can resolve this problem:
-https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
-Steps to reproduce:
-(1) Create VM (virsh define)
-(2) Add 64 virtio scsi disks
-(3) migrate vm and vm’disks
--------------------------------------------------------------------------------------------------------------------------------------
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
-邮件！
-This e-mail and its attachments contain confidential information from New H3C, which is
-intended only for the person or entity whose address is listed above. Any use of the
-information contained herein in any way (including, but not limited to, total or partial
-disclosure, reproduction, or dissemination) by persons other than the intended
-recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender
-by phone or email immediately and delete it!
-
-* Yuchen (yu.chen@h3c.com) wrote:
->
-When migrate vm and vm’s disks target host qemu crash due to an invalid free.
->
->
-#0  object_unref (obj=0x1000) at
->
-/qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
->
-#1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
->
-at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
->
-#2  flatview_destroy (view=0x560439653880) at
->
-/qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
->
-#3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
->
-at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
->
-#4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
->
-#5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
->
->
-test base qemu-2.12.0，but use lastest qemu(v6.0.0-rc2) also reproduce.
-Interesting.
-
->
-As follow patch can resolve this problem:
->
-https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
-That's a pci/rcu change; ccing Paolo and Micahel.
-
->
-Steps to reproduce:
->
-(1) Create VM (virsh define)
->
-(2) Add 64 virtio scsi disks
-Is that hot adding the disks later, or are they included in the VM at
-creation?
-Can you provide a libvirt XML example?
-
->
-(3) migrate vm and vm’disks
-What do you mean by 'and vm disks' - are you doing a block migration?
-
-Dave
-
->
--------------------------------------------------------------------------------------------------------------------------------------
->
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
->
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
->
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
->
-邮件！
->
-This e-mail and its attachments contain confidential information from New
->
-H3C, which is
->
-intended only for the person or entity whose address is listed above. Any use
->
-of the
->
-information contained herein in any way (including, but not limited to, total
->
-or partial
->
-disclosure, reproduction, or dissemination) by persons other than the intended
->
-recipient(s) is prohibited. If you receive this e-mail in error, please
->
-notify the sender
->
-by phone or email immediately and delete it!
--- 
-Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
-
->
------邮件原件-----
->
-发件人: Dr. David Alan Gilbert [
-mailto:dgilbert@redhat.com
-]
->
-发送时间: 2021年4月8日 19:27
->
-收件人: yuchen (Cloud) <yu.chen@h3c.com>; pbonzini@redhat.com;
->
-mst@redhat.com
->
-抄送: qemu-devel@nongnu.org
->
-主题: Re: [Qemu-devel][bug] qemu crash when migrate vm and vm's disks
->
->
-* Yuchen (yu.chen@h3c.com) wrote:
->
-> When migrate vm and vm’s disks target host qemu crash due to an invalid
->
-free.
->
->
->
-> #0  object_unref (obj=0x1000) at
->
-> /qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
->
-> #1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
->
->     at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
->
-> #2  flatview_destroy (view=0x560439653880) at
->
-> /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
->
-> #3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
->
->     at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
->
-> #4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
->
-> #5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
->
->
->
-> test base qemu-2.12.0，but use lastest qemu(v6.0.0-rc2) also reproduce.
->
->
-Interesting.
->
->
-> As follow patch can resolve this problem:
->
->
-https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
->
->
-That's a pci/rcu change; ccing Paolo and Micahel.
->
->
-> Steps to reproduce:
->
-> (1) Create VM (virsh define)
->
-> (2) Add 64 virtio scsi disks
->
->
-Is that hot adding the disks later, or are they included in the VM at
->
-creation?
->
-Can you provide a libvirt XML example?
->
-Include disks in the VM at creation
-
-vm disks xml (only virtio scsi disks):
-  <devices>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native'/>
-      <source file='/vms/tempp/vm-os'/>
-      <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data1'/>
-      <target dev='sda' bus='scsi'/>
-      <address type='drive' controller='2' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data2'/>
-      <target dev='sdb' bus='scsi'/>
-      <address type='drive' controller='3' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data3'/>
-      <target dev='sdc' bus='scsi'/>
-      <address type='drive' controller='4' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data4'/>
-      <target dev='sdd' bus='scsi'/>
-      <address type='drive' controller='5' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data5'/>
-      <target dev='sde' bus='scsi'/>
-      <address type='drive' controller='6' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data6'/>
-      <target dev='sdf' bus='scsi'/>
-      <address type='drive' controller='7' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data7'/>
-      <target dev='sdg' bus='scsi'/>
-      <address type='drive' controller='8' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data8'/>
-      <target dev='sdh' bus='scsi'/>
-      <address type='drive' controller='9' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data9'/>
-      <target dev='sdi' bus='scsi'/>
-      <address type='drive' controller='10' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data10'/>
-      <target dev='sdj' bus='scsi'/>
-      <address type='drive' controller='11' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data11'/>
-      <target dev='sdk' bus='scsi'/>
-      <address type='drive' controller='12' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data12'/>
-      <target dev='sdl' bus='scsi'/>
-      <address type='drive' controller='13' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data13'/>
-      <target dev='sdm' bus='scsi'/>
-      <address type='drive' controller='14' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data14'/>
-      <target dev='sdn' bus='scsi'/>
-      <address type='drive' controller='15' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data15'/>
-      <target dev='sdo' bus='scsi'/>
-      <address type='drive' controller='16' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data16'/>
-      <target dev='sdp' bus='scsi'/>
-      <address type='drive' controller='17' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data17'/>
-      <target dev='sdq' bus='scsi'/>
-      <address type='drive' controller='18' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data18'/>
-      <target dev='sdr' bus='scsi'/>
-      <address type='drive' controller='19' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data19'/>
-      <target dev='sds' bus='scsi'/>
-      <address type='drive' controller='20' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data20'/>
-      <target dev='sdt' bus='scsi'/>
-      <address type='drive' controller='21' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data21'/>
-      <target dev='sdu' bus='scsi'/>
-      <address type='drive' controller='22' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data22'/>
-      <target dev='sdv' bus='scsi'/>
-      <address type='drive' controller='23' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data23'/>
-      <target dev='sdw' bus='scsi'/>
-      <address type='drive' controller='24' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data24'/>
-      <target dev='sdx' bus='scsi'/>
-      <address type='drive' controller='25' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data25'/>
-      <target dev='sdy' bus='scsi'/>
-      <address type='drive' controller='26' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data26'/>
-      <target dev='sdz' bus='scsi'/>
-      <address type='drive' controller='27' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data27'/>
-      <target dev='sdaa' bus='scsi'/>
-      <address type='drive' controller='28' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data28'/>
-      <target dev='sdab' bus='scsi'/>
-      <address type='drive' controller='29' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data29'/>
-      <target dev='sdac' bus='scsi'/>
-      <address type='drive' controller='30' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data30'/>
-      <target dev='sdad' bus='scsi'/>
-      <address type='drive' controller='31' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data31'/>
-      <target dev='sdae' bus='scsi'/>
-      <address type='drive' controller='32' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data32'/>
-      <target dev='sdaf' bus='scsi'/>
-      <address type='drive' controller='33' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data33'/>
-      <target dev='sdag' bus='scsi'/>
-      <address type='drive' controller='34' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data34'/>
-      <target dev='sdah' bus='scsi'/>
-      <address type='drive' controller='35' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data35'/>
-      <target dev='sdai' bus='scsi'/>
-      <address type='drive' controller='36' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data36'/>
-      <target dev='sdaj' bus='scsi'/>
-      <address type='drive' controller='37' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data37'/>
-      <target dev='sdak' bus='scsi'/>
-      <address type='drive' controller='38' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data38'/>
-      <target dev='sdal' bus='scsi'/>
-      <address type='drive' controller='39' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data39'/>
-      <target dev='sdam' bus='scsi'/>
-      <address type='drive' controller='40' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data40'/>
-      <target dev='sdan' bus='scsi'/>
-      <address type='drive' controller='41' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data41'/>
-      <target dev='sdao' bus='scsi'/>
-      <address type='drive' controller='42' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data42'/>
-      <target dev='sdap' bus='scsi'/>
-      <address type='drive' controller='43' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data43'/>
-      <target dev='sdaq' bus='scsi'/>
-      <address type='drive' controller='44' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data44'/>
-      <target dev='sdar' bus='scsi'/>
-      <address type='drive' controller='45' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data45'/>
-      <target dev='sdas' bus='scsi'/>
-      <address type='drive' controller='46' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data46'/>
-      <target dev='sdat' bus='scsi'/>
-      <address type='drive' controller='47' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data47'/>
-      <target dev='sdau' bus='scsi'/>
-      <address type='drive' controller='48' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data48'/>
-      <target dev='sdav' bus='scsi'/>
-      <address type='drive' controller='49' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data49'/>
-      <target dev='sdaw' bus='scsi'/>
-      <address type='drive' controller='50' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data50'/>
-      <target dev='sdax' bus='scsi'/>
-      <address type='drive' controller='51' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data51'/>
-      <target dev='sday' bus='scsi'/>
-      <address type='drive' controller='52' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data52'/>
-      <target dev='sdaz' bus='scsi'/>
-      <address type='drive' controller='53' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data53'/>
-      <target dev='sdba' bus='scsi'/>
-      <address type='drive' controller='54' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data54'/>
-      <target dev='sdbb' bus='scsi'/>
-      <address type='drive' controller='55' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data55'/>
-      <target dev='sdbc' bus='scsi'/>
-      <address type='drive' controller='56' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data56'/>
-      <target dev='sdbd' bus='scsi'/>
-      <address type='drive' controller='57' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data57'/>
-      <target dev='sdbe' bus='scsi'/>
-      <address type='drive' controller='58' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data58'/>
-      <target dev='sdbf' bus='scsi'/>
-      <address type='drive' controller='59' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data59'/>
-      <target dev='sdbg' bus='scsi'/>
-      <address type='drive' controller='60' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data60'/>
-      <target dev='sdbh' bus='scsi'/>
-      <address type='drive' controller='61' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data61'/>
-      <target dev='sdbi' bus='scsi'/>
-      <address type='drive' controller='62' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data62'/>
-      <target dev='sdbj' bus='scsi'/>
-      <address type='drive' controller='63' bus='0' target='0' unit='0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data63'/>
-      <target dev='sdbk' bus='scsi'/>
-      <address type='drive' controller='64' bus='0' target='0' unit='0'/>
-    </disk>
-    <controller type='scsi' index='0'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x02' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='1' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='2' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x01' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='3' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x03' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='4' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x04' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='5' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x05' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='6' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x06' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='7' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x07' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='8' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x08' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='9' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x09' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='10' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0a' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='11' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0b' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='12' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0c' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='13' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0d' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='14' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0e' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='15' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0f' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='16' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x10' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='17' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x11' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='18' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x12' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='19' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x13' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='20' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x14' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='21' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x15' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='22' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x16' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='23' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x17' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='24' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x18' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='25' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x19' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='26' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1a' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='27' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1b' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='28' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1c' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='29' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1d' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='30' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1e' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='31' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='32' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='33' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x03' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='34' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x04' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='35' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x05' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='36' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x06' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='37' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x07' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='38' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x08' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='39' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x09' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='40' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0a' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='41' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0b' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='42' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0c' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='43' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0d' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='44' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='45' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='46' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='47' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='48' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='49' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='50' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='51' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x10' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='52' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x11' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='53' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x12' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='54' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x13' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='55' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x14' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='56' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x15' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='57' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x16' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='58' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x17' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='59' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x18' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='60' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x19' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='61' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1a' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='62' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='63' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1c' 
-function='0x0'/>
-    </controller>
-    <controller type='scsi' index='64' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1d' 
-function='0x0'/>
-    </controller>
-    <controller type='pci' index='0' model='pci-root'/>
-    <controller type='pci' index='1' model='pci-bridge'>
-      <model name='pci-bridge'/>
-      <target chassisNr='1'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' 
-function='0x0'/>
-    </controller>
-    <controller type='pci' index='2' model='pci-bridge'>
-      <model name='pci-bridge'/>
-      <target chassisNr='2'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1f' 
-function='0x0'/>
-    </controller>
-  </devices>
-
-vm disks xml (only virtio disks):
-  <devices>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native'/>
-      <source file='/vms/tempp/vm-os'/>
-      <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data2'/>
-      <target dev='vdb' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data3'/>
-      <target dev='vdc' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data4'/>
-      <target dev='vdd' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data5'/>
-      <target dev='vde' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data6'/>
-      <target dev='vdf' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data7'/>
-      <target dev='vdg' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data8'/>
-      <target dev='vdh' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data9'/>
-      <target dev='vdi' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x10' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data10'/>
-      <target dev='vdj' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x11' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data11'/>
-      <target dev='vdk' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x12' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data12'/>
-      <target dev='vdl' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x13' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data13'/>
-      <target dev='vdm' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x14' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data14'/>
-      <target dev='vdn' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x15' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data15'/>
-      <target dev='vdo' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x16' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data16'/>
-      <target dev='vdp' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x17' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data17'/>
-      <target dev='vdq' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x18' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data18'/>
-      <target dev='vdr' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x19' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data19'/>
-      <target dev='vds' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1a' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data20'/>
-      <target dev='vdt' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data21'/>
-      <target dev='vdu' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1c' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data22'/>
-      <target dev='vdv' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1d' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data23'/>
-      <target dev='vdw' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data24'/>
-      <target dev='vdx' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x01' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data25'/>
-      <target dev='vdy' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x03' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data26'/>
-      <target dev='vdz' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x04' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data27'/>
-      <target dev='vdaa' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x05' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data28'/>
-      <target dev='vdab' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x06' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data29'/>
-      <target dev='vdac' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x07' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data30'/>
-      <target dev='vdad' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x08' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data31'/>
-      <target dev='vdae' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x09' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data32'/>
-      <target dev='vdaf' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0a' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data33'/>
-      <target dev='vdag' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0b' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data34'/>
-      <target dev='vdah' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0c' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data35'/>
-      <target dev='vdai' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0d' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data36'/>
-      <target dev='vdaj' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0e' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data37'/>
-      <target dev='vdak' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x0f' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data38'/>
-      <target dev='vdal' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x10' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data39'/>
-      <target dev='vdam' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x11' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data40'/>
-      <target dev='vdan' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x12' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data41'/>
-      <target dev='vdao' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x13' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data42'/>
-      <target dev='vdap' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x14' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data43'/>
-      <target dev='vdaq' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x15' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data44'/>
-      <target dev='vdar' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x16' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data45'/>
-      <target dev='vdas' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x17' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data46'/>
-      <target dev='vdat' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x18' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data47'/>
-      <target dev='vdau' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x19' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data48'/>
-      <target dev='vdav' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1a' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data49'/>
-      <target dev='vdaw' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1b' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data50'/>
-      <target dev='vdax' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1c' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data51'/>
-      <target dev='vday' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1d' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data52'/>
-      <target dev='vdaz' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1e' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data53'/>
-      <target dev='vdba' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data54'/>
-      <target dev='vdbb' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data55'/>
-      <target dev='vdbc' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x03' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data56'/>
-      <target dev='vdbd' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x04' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data57'/>
-      <target dev='vdbe' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x05' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data58'/>
-      <target dev='vdbf' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x06' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data59'/>
-      <target dev='vdbg' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x07' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data60'/>
-      <target dev='vdbh' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x08' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data61'/>
-      <target dev='vdbi' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x09' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data62'/>
-      <target dev='vdbj' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0a' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data63'/>
-      <target dev='vdbk' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x0b' 
-function='0x0'/>
-    </disk>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
-discard='unmap'/>
-      <source file='/vms/tempp/vm-data1'/>
-      <target dev='vdbl' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' 
-function='0x0'/>
-    </disk>
-    <controller type='pci' index='0' model='pci-root'/>
-    <controller type='pci' index='1' model='pci-bridge'>
-      <model name='pci-bridge'/>
-      <target chassisNr='1'/>
-      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' 
-function='0x0'/>
-    </controller>
-    <controller type='pci' index='2' model='pci-bridge'>
-      <model name='pci-bridge'/>
-      <target chassisNr='2'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x1f' 
-function='0x0'/>
-    </controller>
-  </devices>
-
->
-> (3) migrate vm and vm’disks
->
->
-What do you mean by 'and vm disks' - are you doing a block migration?
->
-Yes, block migration.
-In fact, only migration domain also reproduced.
-
->
-Dave
->
->
-> ----------------------------------------------------------------------
->
-> ---------------------------------------------------------------
->
-Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
--------------------------------------------------------------------------------------------------------------------------------------
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
-邮件！
-This e-mail and its attachments contain confidential information from New H3C, 
-which is
-intended only for the person or entity whose address is listed above. Any use 
-of the
-information contained herein in any way (including, but not limited to, total 
-or partial
-disclosure, reproduction, or dissemination) by persons other than the intended
-recipient(s) is prohibited. If you receive this e-mail in error, please notify 
-the sender
-by phone or email immediately and delete it!
-
diff --git a/results/classifier/005/KVM/80615920 b/results/classifier/005/KVM/80615920
deleted file mode 100644
index b06a8931..00000000
--- a/results/classifier/005/KVM/80615920
+++ /dev/null
@@ -1,356 +0,0 @@
-KVM: 0.803
-mistranslation: 0.800
-other: 0.786
-vnc: 0.768
-instruction: 0.751
-boot: 0.750
-device: 0.748
-assembly: 0.747
-semantic: 0.737
-network: 0.732
-socket: 0.732
-graphic: 0.730
-
-[BUG] accel/tcg: cpu_exec_longjmp_cleanup: assertion failed: (cpu == current_cpu)
-
-It seems there is a bug in SIGALRM handling when 486 system emulates x86_64 
-code.
-
-This code: 
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <pthread.h>
-#include <signal.h>
-#include <unistd.h>
-
-pthread_t thread1, thread2;
-
-// Signal handler for SIGALRM
-void alarm_handler(int sig) {
-    // Do nothing, just wake up the other thread
-}
-
-// Thread 1 function
-void* thread1_func(void* arg) {
-    // Set up the signal handler for SIGALRM
-    signal(SIGALRM, alarm_handler);
-
-    // Wait for 5 seconds
-    sleep(1);
-
-    // Send SIGALRM signal to thread 2
-    pthread_kill(thread2, SIGALRM);
-
-    return NULL;
-}
-
-// Thread 2 function
-void* thread2_func(void* arg) {
-    // Wait for the SIGALRM signal
-    pause();
-
-    printf("Thread 2 woke up!\n");
-
-    return NULL;
-}
-
-int main() {
-    // Create thread 1
-    if (pthread_create(&thread1, NULL, thread1_func, NULL) != 0) {
-        fprintf(stderr, "Failed to create thread 1\n");
-        return 1;
-    }
-
-    // Create thread 2
-    if (pthread_create(&thread2, NULL, thread2_func, NULL) != 0) {
-        fprintf(stderr, "Failed to create thread 2\n");
-        return 1;
-    }
-
-    // Wait for both threads to finish
-    pthread_join(thread1, NULL);
-    pthread_join(thread2, NULL);
-
-    return 0;
-}
-
-
-Fails with this -strace log (there are also unsupported syscalls 334 and 435, 
-but it seems it doesn't affect the code much):
-
-...
-736 rt_sigaction(SIGALRM,0x000000001123ec20,0x000000001123ecc0) = 0
-736 clock_nanosleep(CLOCK_REALTIME,0,{tv_sec = 1,tv_nsec = 0},{tv_sec = 
-1,tv_nsec = 0})
-736 rt_sigprocmask(SIG_BLOCK,0x00000000109fad20,0x0000000010800b38,8) = 0
-736 Unknown syscall 435
-736 
-clone(CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|
- ...
-736 rt_sigprocmask(SIG_SETMASK,0x0000000010800b38,NULL,8)
-736 set_robust_list(0x11a419a0,0) = -1 errno=38 (Function not implemented)
-736 rt_sigprocmask(SIG_SETMASK,0x0000000011a41fb0,NULL,8) = 0
- = 0
-736 pause(0,0,2,277186368,0,295966400)
-736 
-futex(0x000000001123f990,FUTEX_CLOCK_REALTIME|FUTEX_WAIT_BITSET,738,NULL,NULL,0)
- = 0
-736 rt_sigprocmask(SIG_BLOCK,0x00000000109fad20,0x000000001123ee88,8) = 0
-736 getpid() = 736
-736 tgkill(736,739,SIGALRM) = 0
- = -1 errno=4 (Interrupted system call)
---- SIGALRM {si_signo=SIGALRM, si_code=SI_TKILL, si_pid=736, si_uid=0} ---
-0x48874a != 0x3c69e10
-736 rt_sigprocmask(SIG_SETMASK,0x000000001123ee88,NULL,8) = 0
-**
-ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
-(cpu == current_cpu)
-Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
-failed: (cpu == current_cpu)
-0x48874a != 0x3c69e10
-**
-ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
-(cpu == current_cpu)
-Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
-failed: (cpu == current_cpu)
-# 
-
-The code fails either with or without -singlestep, the command line:
-
-/usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestep  /opt/x86_64/alarm.bin
-
-Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't 
-use RDTSC on i486" [1], 
-with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now prints 
-current pointers of 
-cpu and current_cpu (line "0x48874a != 0x3c69e10").
-
-config.log (built as a part of buildroot, basically the minimal possible 
-configuration for running x86_64 on 486):
-
-# Configured with: 
-'/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/build/qemu-8.1.1/configure'
- '--prefix=/usr' 
-'--cross-prefix=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/i486-buildroot-linux-gnu-'
- '--audio-drv-list=' 
-'--python=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/python3'
- 
-'--ninja=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/ninja' 
-'--disable-alsa' '--disable-bpf' '--disable-brlapi' '--disable-bsd-user' 
-'--disable-cap-ng' '--disable-capstone' '--disable-containers' 
-'--disable-coreaudio' '--disable-curl' '--disable-curses' 
-'--disable-dbus-display' '--disable-docs' '--disable-dsound' '--disable-hvf' 
-'--disable-jack' '--disable-libiscsi' '--disable-linux-aio' 
-'--disable-linux-io-uring' '--disable-malloc-trim' '--disable-membarrier' 
-'--disable-mpath' '--disable-netmap' '--disable-opengl' '--disable-oss' 
-'--disable-pa' '--disable-rbd' '--disable-sanitizers' '--disable-selinux' 
-'--disable-sparse' '--disable-strip' '--disable-vde' '--disable-vhost-crypto' 
-'--disable-vhost-user-blk-server' '--disable-virtfs' '--disable-whpx' 
-'--disable-xen' '--disable-attr' '--disable-kvm' '--disable-vhost-net' 
-'--disable-download' '--disable-hexagon-idef-parser' '--disable-system' 
-'--enable-linux-user' '--target-list=x86_64-linux-user' '--disable-vhost-user' 
-'--disable-slirp' '--disable-sdl' '--disable-fdt' '--enable-trace-backends=nop' 
-'--disable-tools' '--disable-guest-agent' '--disable-fuse' 
-'--disable-fuse-lseek' '--disable-seccomp' '--disable-libssh' 
-'--disable-libusb' '--disable-vnc' '--disable-nettle' '--disable-numa' 
-'--disable-pipewire' '--disable-spice' '--disable-usb-redir' 
-'--disable-install-blobs'
-
-Emulation of the same x86_64 code with qemu 6.2.0 installed on another x86_64 
-native machine works fine.
-
-[1]
-https://lists.nongnu.org/archive/html/qemu-devel/2023-11/msg05387.html
-Best regards,
-Petr
-
-On Sat, 25 Nov 2023 at 13:09, Petr Cvek <petrcvekcz@gmail.com> wrote:
->
->
-It seems there is a bug in SIGALRM handling when 486 system emulates x86_64
->
-code.
-486 host is pretty well out of support currently. Can you reproduce
-this on a less ancient host CPU type ?
-
->
-ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed:
->
-(cpu == current_cpu)
->
-Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
->
-assertion failed: (cpu == current_cpu)
->
-0x48874a != 0x3c69e10
->
-**
->
-ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed:
->
-(cpu == current_cpu)
->
-Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
->
-assertion failed: (cpu == current_cpu)
-What compiler version do you build QEMU with? That
-assert is there because we have seen some buggy compilers
-in the past which don't correctly preserve the variable
-value as the setjmp/longjmp spec requires them to.
-
-thanks
--- PMM
-
-Dne 27. 11. 23 v 10:37 Peter Maydell napsal(a):
->
-On Sat, 25 Nov 2023 at 13:09, Petr Cvek <petrcvekcz@gmail.com> wrote:
->
->
->
-> It seems there is a bug in SIGALRM handling when 486 system emulates x86_64
->
-> code.
->
->
-486 host is pretty well out of support currently. Can you reproduce
->
-this on a less ancient host CPU type ?
->
-It seems it only fails when the code is compiled for i486. QEMU built with the 
-same compiler with -march=i586 and above runs on the same physical hardware 
-without a problem. All -march= variants were executed on ryzen 3600.
-
->
-> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
->
-> failed: (cpu == current_cpu)
->
-> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
->
-> assertion failed: (cpu == current_cpu)
->
-> 0x48874a != 0x3c69e10
->
-> **
->
-> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
->
-> failed: (cpu == current_cpu)
->
-> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
->
-> assertion failed: (cpu == current_cpu)
->
->
-What compiler version do you build QEMU with? That
->
-assert is there because we have seen some buggy compilers
->
-in the past which don't correctly preserve the variable
->
-value as the setjmp/longjmp spec requires them to.
->
-i486 and i586+ code variants were compiled with GCC 13.2.0 (more exactly, 
-slackware64 current multilib distribution).
-
-i486 binary which runs on the real 486 is also GCC 13.2.0 and installed as a 
-part of the buildroot crosscompiler (about two week old git snapshot).
-
->
-thanks
->
--- PMM
-best regards,
-Petr
-
-On 11/25/23 07:08, Petr Cvek wrote:
-ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
-(cpu == current_cpu)
-Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
-failed: (cpu == current_cpu)
-#
-
-The code fails either with or without -singlestep, the command line:
-
-/usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestep  /opt/x86_64/alarm.bin
-
-Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't use 
-RDTSC on i486" [1],
-with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now prints 
-current pointers of
-cpu and current_cpu (line "0x48874a != 0x3c69e10").
-If you try this again with 8.2-rc2, you should not see an assertion failure.
-You should see instead
-
-QEMU internal SIGILL {code=ILLOPC, addr=0x12345678}
-which I think more accurately summarizes the situation of attempting RDTSC on hardware
-that does not support it.
-r~
-
-Dne 29. 11. 23 v 15:25 Richard Henderson napsal(a):
->
-On 11/25/23 07:08, Petr Cvek wrote:
->
-> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
->
-> failed: (cpu == current_cpu)
->
-> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
->
-> assertion failed: (cpu == current_cpu)
->
-> #
->
->
->
-> The code fails either with or without -singlestep, the command line:
->
->
->
-> /usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestepÂ
->
-> /opt/x86_64/alarm.bin
->
->
->
-> Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't
->
-> use RDTSC on i486" [1],
->
-> with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now
->
-> prints current pointers of
->
-> cpu and current_cpu (line "0x48874a != 0x3c69e10").
->
->
->
-If you try this again with 8.2-rc2, you should not see an assertion failure.
->
-You should see instead
->
->
-QEMU internal SIGILL {code=ILLOPC, addr=0x12345678}
->
->
-which I think more accurately summarizes the situation of attempting RDTSC on
->
-hardware that does not support it.
->
->
-Compilation of vanilla qemu v8.2.0-rc2 with -march=i486 by GCC 13.2.0 and 
-running the resulting binary on ryzen still leads to:
-
-**
-ERROR:../accel/tcg/cpu-exec.c:533:cpu_exec_longjmp_cleanup: assertion failed: 
-(cpu == current_cpu)
-Bail out! ERROR:../accel/tcg/cpu-exec.c:533:cpu_exec_longjmp_cleanup: assertion 
-failed: (cpu == current_cpu)
-Aborted
-
->
->
-r~
-Petr
-
diff --git a/results/classifier/005/README.md b/results/classifier/005/README.md
deleted file mode 100644
index aaf57dce..00000000
--- a/results/classifier/005/README.md
+++ /dev/null
@@ -1,9 +0,0 @@
-## 005
-
-```python
-multi_label = True
-model = "facebook/bart-large-mnli"
-number_bugs = 89
-```
-
-If a category, which suggests a bug we want to discard, has a score over *0.92*, it gets applied, even if it is not the highest score.
diff --git a/results/classifier/005/boot/51610399 b/results/classifier/005/boot/51610399
deleted file mode 100644
index 6bcd4697..00000000
--- a/results/classifier/005/boot/51610399
+++ /dev/null
@@ -1,316 +0,0 @@
-boot: 0.986
-graphic: 0.986
-assembly: 0.985
-instruction: 0.985
-other: 0.985
-semantic: 0.984
-device: 0.984
-mistranslation: 0.983
-socket: 0.978
-KVM: 0.975
-vnc: 0.974
-network: 0.973
-
-[BUG][powerpc] KVM Guest Boot Failure – Hangs at "Booting Linux via __start()”
-
-Bug Description:
-Encountering a boot failure when launching a KVM guest with
-qemu-system-ppc64. The guest hangs at boot, and the QEMU monitor
-crashes.
-Reproduction Steps:
-# qemu-system-ppc64 --version
-QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
-Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
-# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
-pseries,accel=kvm \
--m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
-  -device virtio-scsi-pci,id=scsi \
--drive
-file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
-\
--device scsi-hd,drive=drive0,bus=scsi.0 \
-  -netdev bridge,id=net0,br=virbr0 \
-  -device virtio-net-pci,netdev=net0 \
-  -serial pty \
-  -device virtio-balloon-pci \
-  -cpu host
-QEMU 9.2.50 monitor - type 'help' for more information
-char device redirected to /dev/pts/2 (label serial0)
-(qemu)
-(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
-unavailable: IRQ_XIVE capability must be present for KVM
-Falling back to kernel-irqchip=off
-** Qemu Hang
-
-(In another ssh session)
-# screen /dev/pts/2
-Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
-(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
-(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
-15:20:17 UTC 2024
-Detected machine type: 0000000000000101
-command line:
-BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
-root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
-Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
-Calling ibm,client-architecture-support... done
-memory layout at init:
-  memory_limit : 0000000000000000 (16 MB aligned)
-  alloc_bottom : 0000000008200000
-  alloc_top    : 0000000030000000
-  alloc_top_hi : 0000000800000000
-  rmo_top      : 0000000030000000
-  ram_top      : 0000000800000000
-instantiating rtas at 0x000000002fff0000... done
-prom_hold_cpus: skipped
-copying OF device tree...
-Building dt strings...
-Building dt structure...
-Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
-Device tree struct  0x0000000008220000 -> 0x0000000008230000
-Quiescing Open Firmware ...
-Booting Linux via __start() @ 0x0000000000440000 ...
-** Guest Console Hang
-
-
-Git Bisect:
-Performing git bisect points to the following patch:
-# git bisect bad
-e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
-commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
-Author: Nicholas Piggin <npiggin@gmail.com>
-Date:   Thu Dec 19 13:40:31 2024 +1000
-
-    target/ppc: fix timebase register reset state
-(H)DEC and PURR get reset before icount does, which causes them to
-be
-skewed and not match the init state. This can cause replay to not
-match the recorded trace exactly. For DEC and HDEC this is usually
-not
-noticable since they tend to get programmed before affecting the
-    target machine. PURR has been observed to cause replay bugs when
-    running Linux.
-
-    Fix this by resetting using a time of 0.
-
-    Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
-    Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
-
- hw/ppc/ppc.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
-
-Reverting the patch helps boot the guest.
-Thanks,
-Misbah Anjum N
-
-Thanks for the report.
-
-Tricky problem. A secondary CPU is hanging before it is started by the
-primary via rtas call.
-
-That secondary keeps calling kvm_cpu_exec(), which keeps exiting out
-early with EXCP_HLT because kvm_arch_process_async_events() returns
-true because that cpu has ->halted=1. That just goes around he run
-loop because there is an interrupt pending (DEC).
-
-So it never runs. It also never releases the BQL, and another CPU,
-the primary which is actually supposed to be running, is stuck in
-spapr_set_all_lpcrs() in run_on_cpu() waiting for the BQL.
-
-This patch just exposes the bug I think, by causing the interrupt.
-although I'm not quite sure why it's okay previously (-ve decrementer
-values should be causing a timer exception too). The timer exception
-should not be taken as an interrupt by those secondary CPUs, and it
-doesn't because it is masked, until set_all_lpcrs sets an LPCR value
-that enables powersave wakeup on decrementer interrupt.
-
-The start_powered_off sate just sets ->halted, which makes it look
-like a powersaving state. Logically I think it's not the same thing
-as far as spapr goes. I don't know why start_powered_off only sets
-->halted, and not ->stop/stopped as well.
-
-Not sure how best to solve it cleanly. I'll send a revert if I can't
-get something working soon.
-
-Thanks,
-Nick
-
-On Tue Mar 18, 2025 at 7:09 AM AEST, misanjum wrote:
->
-Bug Description:
->
-Encountering a boot failure when launching a KVM guest with
->
-qemu-system-ppc64. The guest hangs at boot, and the QEMU monitor
->
-crashes.
->
->
->
-Reproduction Steps:
->
-# qemu-system-ppc64 --version
->
-QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
->
-Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
->
->
-# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
->
-pseries,accel=kvm \
->
--m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
->
--device virtio-scsi-pci,id=scsi \
->
--drive
->
-file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
->
->
-\
->
--device scsi-hd,drive=drive0,bus=scsi.0 \
->
--netdev bridge,id=net0,br=virbr0 \
->
--device virtio-net-pci,netdev=net0 \
->
--serial pty \
->
--device virtio-balloon-pci \
->
--cpu host
->
-QEMU 9.2.50 monitor - type 'help' for more information
->
-char device redirected to /dev/pts/2 (label serial0)
->
-(qemu)
->
-(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
->
-unavailable: IRQ_XIVE capability must be present for KVM
->
-Falling back to kernel-irqchip=off
->
-** Qemu Hang
->
->
-(In another ssh session)
->
-# screen /dev/pts/2
->
-Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
->
-(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
->
-(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
->
-15:20:17 UTC 2024
->
-Detected machine type: 0000000000000101
->
-command line:
->
-BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
->
-root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
->
-Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
->
-Calling ibm,client-architecture-support... done
->
-memory layout at init:
->
-memory_limit : 0000000000000000 (16 MB aligned)
->
-alloc_bottom : 0000000008200000
->
-alloc_top    : 0000000030000000
->
-alloc_top_hi : 0000000800000000
->
-rmo_top      : 0000000030000000
->
-ram_top      : 0000000800000000
->
-instantiating rtas at 0x000000002fff0000... done
->
-prom_hold_cpus: skipped
->
-copying OF device tree...
->
-Building dt strings...
->
-Building dt structure...
->
-Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
->
-Device tree struct  0x0000000008220000 -> 0x0000000008230000
->
-Quiescing Open Firmware ...
->
-Booting Linux via __start() @ 0x0000000000440000 ...
->
-** Guest Console Hang
->
->
->
-Git Bisect:
->
-Performing git bisect points to the following patch:
->
-# git bisect bad
->
-e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
->
-commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
->
-Author: Nicholas Piggin <npiggin@gmail.com>
->
-Date:   Thu Dec 19 13:40:31 2024 +1000
->
->
-target/ppc: fix timebase register reset state
->
->
-(H)DEC and PURR get reset before icount does, which causes them to
->
-be
->
-skewed and not match the init state. This can cause replay to not
->
-match the recorded trace exactly. For DEC and HDEC this is usually
->
-not
->
-noticable since they tend to get programmed before affecting the
->
-target machine. PURR has been observed to cause replay bugs when
->
-running Linux.
->
->
-Fix this by resetting using a time of 0.
->
->
-Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
->
-Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
->
->
-hw/ppc/ppc.c | 11 ++++++++---
->
-1 file changed, 8 insertions(+), 3 deletions(-)
->
->
->
-Reverting the patch helps boot the guest.
->
-Thanks,
->
-Misbah Anjum N
-
diff --git a/results/classifier/005/boot/60339453 b/results/classifier/005/boot/60339453
deleted file mode 100644
index df0cfc20..00000000
--- a/results/classifier/005/boot/60339453
+++ /dev/null
@@ -1,69 +0,0 @@
-boot: 0.782
-other: 0.776
-instruction: 0.713
-device: 0.706
-mistranslation: 0.699
-network: 0.682
-vnc: 0.680
-graphic: 0.671
-KVM: 0.669
-semantic: 0.662
-socket: 0.607
-assembly: 0.486
-
-[BUG] scsi: vmw_pvscsi: Boot hangs during scsi under qemu, post commit e662502b3a78
-
-Hi,
-
-Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length"),
-and its backports to stable trees, makes kernel hang during boot, when
-ran as a VM under qemu with following parameters:
-
-  -drive file=$DISKFILE,if=none,id=sda
-  -device pvscsi
-  -device scsi-hd,bus=scsi.0,drive=sda
-
-Diving deeper, commit e662502b3a78
-
-  @@ -585,7 +585,13 @@ static void pvscsi_complete_request(struct 
-pvscsi_adapter *adapter,
-                case BTSTAT_SUCCESS:
-  +                     /*
-  +                      * Commands like INQUIRY may transfer less data than
-  +                      * requested by the initiator via bufflen. Set residual
-  +                      * count to make upper layer aware of the actual amount
-  +                      * of data returned.
-  +                      */
-  +                     scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
-
-assumes 'e->dataLen' is properly armed with actual num of bytes
-transferred; alas qemu's hw/scsi/vmw_pvscsi.c never arms the 'dataLen'
-field of the completion descriptor (kept zero).
-
-As a result, the residual count is set as the *entire* 'scsi_bufflen' of a
-good transfer, which makes upper scsi layers repeatedly ignore this
-valid transfer.
-
-Not properly arming 'dataLen' seems as an oversight in qemu, which needs
-to be fixed.
-
-However, since kernels with commit e662502b3a78 (and backports) now fail
-to boot under qemu's "-device pvscsi", a suggested workaround is to set
-the residual count *only* if 'e->dataLen' is armed, e.g:
-
-  @@ -588,7 +588,8 @@ static void pvscsi_complete_request(struct pvscsi_adapter 
-*adapter,
-                           * count to make upper layer aware of the actual 
-amount
-                           * of data returned.
-                           */
-  -                       scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
-  +                       if (e->dataLen)
-  +                               scsi_set_resid(cmd, scsi_bufflen(cmd) - 
-e->dataLen);
-
-in order to make kernels boot on old qemu binaries.
-
-Best,
-Shmulik
-
diff --git a/results/classifier/005/categories.csv b/results/classifier/005/categories.csv
deleted file mode 100644
index b9ca9355..00000000
--- a/results/classifier/005/categories.csv
+++ /dev/null
@@ -1,11 +0,0 @@
-category, count
-network, 2
-other, 39
-vnc, 4
-mistranslation, 8
-graphic, 6
-instruction, 4
-semantic, 7
-device, 12
-KVM, 5
-boot, 2
diff --git a/results/classifier/005/device/14488057 b/results/classifier/005/device/14488057
deleted file mode 100644
index 8637a174..00000000
--- a/results/classifier/005/device/14488057
+++ /dev/null
@@ -1,719 +0,0 @@
-device: 0.929
-other: 0.922
-assembly: 0.912
-instruction: 0.908
-semantic: 0.905
-boot: 0.892
-graphic: 0.887
-mistranslation: 0.885
-vnc: 0.882
-KVM: 0.880
-network: 0.846
-socket: 0.825
-
-[Qemu-devel] [BUG] user-to-root privesc inside VM via bad translation caching
-
-This is an issue in QEMU's system emulation for X86 in TCG mode.
-The issue permits an attacker who can execute code in guest ring 3
-with normal user privileges to inject code into other processes that
-are running in guest ring 3, in particular root-owned processes.
-
-== reproduction steps ==
-
- - Create an x86-64 VM and install Debian Jessie in it. The following
-   steps should all be executed inside the VM.
- - Verify that procmail is installed and the correct version:
-       address@hidden:~# apt-cache show procmail | egrep 'Version|SHA'
-       Version: 3.22-24
-       SHA1: 54ed2d51db0e76f027f06068ab5371048c13434c
-       SHA256: 4488cf6975af9134a9b5238d5d70e8be277f70caa45a840dfbefd2dc444bfe7f
- - Install build-essential and nasm ("apt install build-essential nasm").
- - Unpack the exploit, compile it and run it:
-       address@hidden:~$ tar xvf procmail_cache_attack.tar
-       procmail_cache_attack/
-       procmail_cache_attack/shellcode.asm
-       procmail_cache_attack/xp.c
-       procmail_cache_attack/compile.sh
-       procmail_cache_attack/attack.c
-       address@hidden:~$ cd procmail_cache_attack
-       address@hidden:~/procmail_cache_attack$ ./compile.sh
-       address@hidden:~/procmail_cache_attack$ ./attack
-       memory mappings set up
-       child is dead, codegen should be complete
-       executing code as root! :)
-       address@hidden:~/procmail_cache_attack# id
-       uid=0(root) gid=0(root) groups=0(root),[...]
-
-Note: While the exploit depends on the precise version of procmail,
-the actual vulnerability is in QEMU, not in procmail. procmail merely
-serves as a seldomly-executed setuid root binary into which code can
-be injected.
-
-
-== detailed issue description ==
-QEMU caches translated basic blocks. To look up a translated basic
-block, the function tb_find() is used, which uses tb_htable_lookup()
-in its slowpath, which in turn compares translated basic blocks
-(TranslationBlock) to the lookup information (struct tb_desc) using
-tb_cmp().
-
-tb_cmp() attempts to ensure (among other things) that both the virtual
-start address of the basic block and the physical addresses that the
-basic block covers match. When checking the physical addresses, it
-assumes that a basic block can span at most two pages.
-
-gen_intermediate_code() attempts to enforce this by stopping the
-translation of a basic block if nearly one page of instructions has
-been translated already:
-
-    /* if too long translation, stop generation too */
-    if (tcg_op_buf_full() ||
-        (pc_ptr - pc_start) >= (TARGET_PAGE_SIZE - 32) ||
-        num_insns >= max_insns) {
-        gen_jmp_im(pc_ptr - dc->cs_base);
-        gen_eob(dc);
-        break;
-    }
-
-However, while real X86 processors have a maximum instruction length
-of 15 bytes, QEMU's instruction decoder for X86 does not place any
-limit on the instruction length or the number of instruction prefixes.
-Therefore, it is possible to create an arbitrarily long instruction
-by e.g. prepending an arbitrary number of LOCK prefixes to a normal
-instruction. This permits creating a basic block that spans three
-pages by simply appending an approximately page-sized instruction to
-the end of a normal basic block that starts close to the end of a
-page.
-
-Such an overlong basic block causes the basic block caching to fail as
-follows: If code is generated and cached for a basic block that spans
-the physical pages (A,E,B), this basic block will be returned by
-lookups in a process in which the physical pages (A,B,C) are mapped
-in the same virtual address range (assuming that all other lookup
-parameters match).
-
-This behavior can be abused by an attacker e.g. as follows: If a
-non-relocatable world-readable setuid executable legitimately contains
-the pages (A,B,C), an attacker can map (A,E,B) into his own process,
-at the normal load address of A, where E is an attacker-controlled
-page. If a legitimate basic block spans the pages A and B, an attacker
-can write arbitrary non-branch instructions at the start of E, then
-append an overlong instruction
-that ends behind the start of C, yielding a modified basic block that
-spans all three pages. If the attacker then executes the modified
-basic block in his process, the modified basic block is cached.
-Next, the attacker can execute the setuid binary, which will reuse the
-cached modified basic block, executing attacker-controlled
-instructions in the context of the privileged process.
-
-I am sending this to qemu-devel because a QEMU security contact
-told me that QEMU does not consider privilege escalation inside a
-TCG VM to be a security concern.
-procmail_cache_attack.tar
-Description:
-Unix tar archive
-
-On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
->
-This is an issue in QEMU's system emulation for X86 in TCG mode.
->
-The issue permits an attacker who can execute code in guest ring 3
->
-with normal user privileges to inject code into other processes that
->
-are running in guest ring 3, in particular root-owned processes.
->
-I am sending this to qemu-devel because a QEMU security contact
->
-told me that QEMU does not consider privilege escalation inside a
->
-TCG VM to be a security concern.
-Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
-
-We should really fix the crossing-a-page-boundary code for x86.
-I believe we do get it correct for ARM Thumb instructions.
-
-thanks
--- PMM
-
-On Mon, Mar 20, 2017 at 10:46 AM, Peter Maydell wrote:
->
-On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
->
-> This is an issue in QEMU's system emulation for X86 in TCG mode.
->
-> The issue permits an attacker who can execute code in guest ring 3
->
-> with normal user privileges to inject code into other processes that
->
-> are running in guest ring 3, in particular root-owned processes.
->
->
-> I am sending this to qemu-devel because a QEMU security contact
->
-> told me that QEMU does not consider privilege escalation inside a
->
-> TCG VM to be a security concern.
->
->
-Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
->
->
-We should really fix the crossing-a-page-boundary code for x86.
->
-I believe we do get it correct for ARM Thumb instructions.
-How about doing the instruction size check as follows?
-
-diff --git a/target/i386/translate.c b/target/i386/translate.c
-index 72c1b03a2a..94cf3da719 100644
---- a/target/i386/translate.c
-+++ b/target/i386/translate.c
-@@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
-*env, DisasContext *s,
-     default:
-         goto unknown_op;
-     }
-+    if (s->pc - pc_start > 15) {
-+        s->pc = pc_start;
-+        goto illegal_op;
-+    }
-     return s->pc;
-  illegal_op:
-     gen_illegal_opcode(s);
-
-Thanks,
---
-Pranith
-
-On 22 March 2017 at 14:55, Pranith Kumar <address@hidden> wrote:
->
-On Mon, Mar 20, 2017 at 10:46 AM, Peter Maydell wrote:
->
-> On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
->
->> This is an issue in QEMU's system emulation for X86 in TCG mode.
->
->> The issue permits an attacker who can execute code in guest ring 3
->
->> with normal user privileges to inject code into other processes that
->
->> are running in guest ring 3, in particular root-owned processes.
->
->
->
->> I am sending this to qemu-devel because a QEMU security contact
->
->> told me that QEMU does not consider privilege escalation inside a
->
->> TCG VM to be a security concern.
->
->
->
-> Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
->
->
->
-> We should really fix the crossing-a-page-boundary code for x86.
->
-> I believe we do get it correct for ARM Thumb instructions.
->
->
-How about doing the instruction size check as follows?
->
->
-diff --git a/target/i386/translate.c b/target/i386/translate.c
->
-index 72c1b03a2a..94cf3da719 100644
->
---- a/target/i386/translate.c
->
-+++ b/target/i386/translate.c
->
-@@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
->
-*env, DisasContext *s,
->
-default:
->
-goto unknown_op;
->
-}
->
-+    if (s->pc - pc_start > 15) {
->
-+        s->pc = pc_start;
->
-+        goto illegal_op;
->
-+    }
->
-return s->pc;
->
-illegal_op:
->
-gen_illegal_opcode(s);
-This doesn't look right because it means we'll check
-only after we've emitted all the code to do the
-instruction operation, so the effect will be
-"execute instruction, then take illegal-opcode
-exception".
-
-We should check what the x86 architecture spec actually
-says and implement that.
-
-thanks
--- PMM
-
-On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
-<address@hidden> wrote:
->
->
->
-> How about doing the instruction size check as follows?
->
->
->
-> diff --git a/target/i386/translate.c b/target/i386/translate.c
->
-> index 72c1b03a2a..94cf3da719 100644
->
-> --- a/target/i386/translate.c
->
-> +++ b/target/i386/translate.c
->
-> @@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
->
-> *env, DisasContext *s,
->
->      default:
->
->          goto unknown_op;
->
->      }
->
-> +    if (s->pc - pc_start > 15) {
->
-> +        s->pc = pc_start;
->
-> +        goto illegal_op;
->
-> +    }
->
->      return s->pc;
->
->   illegal_op:
->
->      gen_illegal_opcode(s);
->
->
-This doesn't look right because it means we'll check
->
-only after we've emitted all the code to do the
->
-instruction operation, so the effect will be
->
-"execute instruction, then take illegal-opcode
->
-exception".
->
-The pc is restored to original address (s->pc = pc_start), so the
-exception will overwrite the generated illegal instruction and will be
-executed first.
-
-But yes, it's better to follow the architecture manual.
-
-Thanks,
---
-Pranith
-
-On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
->
-On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
->
-<address@hidden> wrote:
->
-> This doesn't look right because it means we'll check
->
-> only after we've emitted all the code to do the
->
-> instruction operation, so the effect will be
->
-> "execute instruction, then take illegal-opcode
->
-> exception".
->
-The pc is restored to original address (s->pc = pc_start), so the
->
-exception will overwrite the generated illegal instruction and will be
->
-executed first.
-s->pc is the guest PC -- moving that backwards will
-not do anything about the generated TCG IR that's
-already been written. You'd need to rewind the
-write pointer in the IR stream, which there is
-no support for doing AFAIK.
-
-thanks
--- PMM
-
-On Wed, Mar 22, 2017 at 11:21 AM, Peter Maydell
-<address@hidden> wrote:
->
-On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
->
-> On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
->
-> <address@hidden> wrote:
->
->> This doesn't look right because it means we'll check
->
->> only after we've emitted all the code to do the
->
->> instruction operation, so the effect will be
->
->> "execute instruction, then take illegal-opcode
->
->> exception".
->
->
-> The pc is restored to original address (s->pc = pc_start), so the
->
-> exception will overwrite the generated illegal instruction and will be
->
-> executed first.
->
->
-s->pc is the guest PC -- moving that backwards will
->
-not do anything about the generated TCG IR that's
->
-already been written. You'd need to rewind the
->
-write pointer in the IR stream, which there is
->
-no support for doing AFAIK.
-Ah, OK. Thanks for the explanation. May be we should check the size of
-the instruction while decoding the prefixes and error out once we
-exceed the limit. We would not generate any IR code.
-
---
-Pranith
-
-On 03/23/2017 02:29 AM, Pranith Kumar wrote:
-On Wed, Mar 22, 2017 at 11:21 AM, Peter Maydell
-<address@hidden> wrote:
-On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
-On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
-<address@hidden> wrote:
-This doesn't look right because it means we'll check
-only after we've emitted all the code to do the
-instruction operation, so the effect will be
-"execute instruction, then take illegal-opcode
-exception".
-The pc is restored to original address (s->pc = pc_start), so the
-exception will overwrite the generated illegal instruction and will be
-executed first.
-s->pc is the guest PC -- moving that backwards will
-not do anything about the generated TCG IR that's
-already been written. You'd need to rewind the
-write pointer in the IR stream, which there is
-no support for doing AFAIK.
-Ah, OK. Thanks for the explanation. May be we should check the size of
-the instruction while decoding the prefixes and error out once we
-exceed the limit. We would not generate any IR code.
-Yes.
-It would not enforce a true limit of 15 bytes, since you can't know that until
-you've done the rest of the decode.  But you'd be able to say that no more than
-14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25 bytes is used.
-Which does fix the bug.
-
-
-r~
-
-On 22/03/2017 21:01, Richard Henderson wrote:
->
->
->
-> Ah, OK. Thanks for the explanation. May be we should check the size of
->
-> the instruction while decoding the prefixes and error out once we
->
-> exceed the limit. We would not generate any IR code.
->
->
-Yes.
->
->
-It would not enforce a true limit of 15 bytes, since you can't know that
->
-until you've done the rest of the decode.  But you'd be able to say that
->
-no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
->
-bytes is used.
->
->
-Which does fix the bug.
-Yeah, that would work for 2.9 if somebody wants to put together a patch.
- Ensuring that all instruction fetching happens before translation side
-effects is a little harder, but perhaps it's also the opportunity to get
-rid of s->rip_offset which is a little ugly.
-
-Paolo
-
-On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
->
->
->
-On 22/03/2017 21:01, Richard Henderson wrote:
->
->>
->
->> Ah, OK. Thanks for the explanation. May be we should check the size of
->
->> the instruction while decoding the prefixes and error out once we
->
->> exceed the limit. We would not generate any IR code.
->
->
->
-> Yes.
->
->
->
-> It would not enforce a true limit of 15 bytes, since you can't know that
->
-> until you've done the rest of the decode.  But you'd be able to say that
->
-> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
->
-> bytes is used.
->
->
->
-> Which does fix the bug.
->
->
-Yeah, that would work for 2.9 if somebody wants to put together a patch.
->
-Ensuring that all instruction fetching happens before translation side
->
-effects is a little harder, but perhaps it's also the opportunity to get
->
-rid of s->rip_offset which is a little ugly.
-How about the following?
-
-diff --git a/target/i386/translate.c b/target/i386/translate.c
-index 72c1b03a2a..67c58b8900 100644
---- a/target/i386/translate.c
-+++ b/target/i386/translate.c
-@@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
-*env, DisasContext *s,
-     s->vex_l = 0;
-     s->vex_v = 0;
-  next_byte:
-+    /* The prefixes can atmost be 14 bytes since x86 has an upper
-+       limit of 15 bytes for the instruction */
-+    if (s->pc - pc_start > 14) {
-+        goto illegal_op;
-+    }
-     b = cpu_ldub_code(env, s->pc);
-     s->pc++;
-     /* Collect prefixes.  */
-
---
-Pranith
-
-On 23/03/2017 17:50, Pranith Kumar wrote:
->
-On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
->
->
->
->
->
-> On 22/03/2017 21:01, Richard Henderson wrote:
->
->>>
->
->>> Ah, OK. Thanks for the explanation. May be we should check the size of
->
->>> the instruction while decoding the prefixes and error out once we
->
->>> exceed the limit. We would not generate any IR code.
->
->>
->
->> Yes.
->
->>
->
->> It would not enforce a true limit of 15 bytes, since you can't know that
->
->> until you've done the rest of the decode.  But you'd be able to say that
->
->> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
->
->> bytes is used.
->
->>
->
->> Which does fix the bug.
->
->
->
-> Yeah, that would work for 2.9 if somebody wants to put together a patch.
->
->  Ensuring that all instruction fetching happens before translation side
->
-> effects is a little harder, but perhaps it's also the opportunity to get
->
-> rid of s->rip_offset which is a little ugly.
->
->
-How about the following?
->
->
-diff --git a/target/i386/translate.c b/target/i386/translate.c
->
-index 72c1b03a2a..67c58b8900 100644
->
---- a/target/i386/translate.c
->
-+++ b/target/i386/translate.c
->
-@@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
->
-*env, DisasContext *s,
->
-s->vex_l = 0;
->
-s->vex_v = 0;
->
-next_byte:
->
-+    /* The prefixes can atmost be 14 bytes since x86 has an upper
->
-+       limit of 15 bytes for the instruction */
->
-+    if (s->pc - pc_start > 14) {
->
-+        goto illegal_op;
->
-+    }
->
-b = cpu_ldub_code(env, s->pc);
->
-s->pc++;
->
-/* Collect prefixes.  */
-Please make the comment more verbose, based on Richard's remark.  We
-should apply it to 2.9.
-
-Also, QEMU usually formats comments with stars on every line.
-
-Paolo
-
-On Thu, Mar 23, 2017 at 1:37 PM, Paolo Bonzini <address@hidden> wrote:
->
->
->
-On 23/03/2017 17:50, Pranith Kumar wrote:
->
-> On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
->
->>
->
->>
->
->> On 22/03/2017 21:01, Richard Henderson wrote:
->
->>>>
->
->>>> Ah, OK. Thanks for the explanation. May be we should check the size of
->
->>>> the instruction while decoding the prefixes and error out once we
->
->>>> exceed the limit. We would not generate any IR code.
->
->>>
->
->>> Yes.
->
->>>
->
->>> It would not enforce a true limit of 15 bytes, since you can't know that
->
->>> until you've done the rest of the decode.  But you'd be able to say that
->
->>> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
->
->>> bytes is used.
->
->>>
->
->>> Which does fix the bug.
->
->>
->
->> Yeah, that would work for 2.9 if somebody wants to put together a patch.
->
->>  Ensuring that all instruction fetching happens before translation side
->
->> effects is a little harder, but perhaps it's also the opportunity to get
->
->> rid of s->rip_offset which is a little ugly.
->
->
->
-> How about the following?
->
->
->
-> diff --git a/target/i386/translate.c b/target/i386/translate.c
->
-> index 72c1b03a2a..67c58b8900 100644
->
-> --- a/target/i386/translate.c
->
-> +++ b/target/i386/translate.c
->
-> @@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
->
-> *env, DisasContext *s,
->
->      s->vex_l = 0;
->
->      s->vex_v = 0;
->
->   next_byte:
->
-> +    /* The prefixes can atmost be 14 bytes since x86 has an upper
->
-> +       limit of 15 bytes for the instruction */
->
-> +    if (s->pc - pc_start > 14) {
->
-> +        goto illegal_op;
->
-> +    }
->
->      b = cpu_ldub_code(env, s->pc);
->
->      s->pc++;
->
->      /* Collect prefixes.  */
->
->
-Please make the comment more verbose, based on Richard's remark.  We
->
-should apply it to 2.9.
->
->
-Also, QEMU usually formats comments with stars on every line.
-OK. I'll send a proper patch with updated comment.
-
-Thanks,
---
-Pranith
-
diff --git a/results/classifier/005/device/24190340 b/results/classifier/005/device/24190340
deleted file mode 100644
index ebbe3125..00000000
--- a/results/classifier/005/device/24190340
+++ /dev/null
@@ -1,2064 +0,0 @@
-device: 0.832
-instruction: 0.818
-other: 0.811
-vnc: 0.808
-boot: 0.803
-semantic: 0.793
-assembly: 0.790
-KVM: 0.776
-graphic: 0.775
-mistranslation: 0.758
-network: 0.723
-socket: 0.715
-
-[BUG, RFC] Block graph deadlock on job-dismiss
-
-Hi all,
-
-There's a bug in block layer which leads to block graph deadlock.
-Notably, it takes place when blockdev IO is processed within a separate
-iothread.
-
-This was initially caught by our tests, and I was able to reduce it to a
-relatively simple reproducer.  Such deadlocks are probably supposed to
-be covered in iotests/graph-changes-while-io, but this deadlock isn't.
-
-Basically what the reproducer does is launches QEMU with a drive having
-'iothread' option set, creates a chain of 2 snapshots, launches
-block-commit job for a snapshot and then dismisses the job, starting
-from the lower snapshot.  If the guest is issuing IO at the same time,
-there's a race in acquiring block graph lock and a potential deadlock.
-
-Here's how it can be reproduced:
-
-1. Run QEMU:
->
-SRCDIR=/path/to/srcdir
->
->
->
->
->
-$SRCDIR/build/qemu-system-x86_64 -enable-kvm \
->
->
--machine q35 -cpu Nehalem \
->
->
--name guest=alma8-vm,debug-threads=on \
->
->
--m 2g -smp 2 \
->
->
--nographic -nodefaults \
->
->
--qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
->
->
--serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
->
->
--object iothread,id=iothread0 \
->
->
--blockdev
->
-node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
->
-\
->
--device virtio-blk-pci,drive=disk,iothread=iothread0
-2. Launch IO (random reads) from within the guest:
->
-nc -U /var/run/alma8-serial.sock
->
-...
->
-[root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k
->
---size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting
->
---rw=randread --iodepth=1 --filename=/testfile
-3. Run snapshots creation & removal of lower snapshot operation in a
-loop (script attached):
->
-while /bin/true ; do ./remove_lower_snap.sh ; done
-And then it occasionally hangs.
-
-Note: I've tried bisecting this, and looks like deadlock occurs starting
-from the following commit:
-
-(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
-(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
-
-On the latest v10.0.0 it does hang as well.
-
-
-Here's backtrace of the main thread:
-
->
-#0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
->
-timeout=<optimized out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:43
->
-#1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
->
-timeout=-1) at ../util/qemu-timer.c:329
->
-#2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
->
-ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
->
-#3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at
->
-../util/aio-posix.c:730
->
-#4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
->
-parent=0x0, poll=true) at ../block/io.c:378
->
-#5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
->
-../block/io.c:391
->
-#6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7682
->
-#7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7608
->
-#8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7668
->
-#9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7608
->
-#10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7668
->
-#11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7608
->
-#12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../blockjob.c:157
->
-#13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7592
->
-#14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7661
->
-#15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
->
-(child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 =
->
-{...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
->
-#16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7592
->
-#17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-errp=0x0)
->
-at ../block.c:7661
->
-#18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0,
->
-ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
->
-#19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at
->
-../block.c:3317
->
-#20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at
->
-../blockjob.c:209
->
-#21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
->
-../blockjob.c:82
->
-#22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
->
-../job.c:474
->
-#23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
->
-../job.c:771
->
-#24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
->
-errp=0x7ffd94b4f488) at ../job.c:783
->
---Type <RET> for more, q to quit, c to continue without paging--
->
-#25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0 "commit-snap1",
->
-errp=0x7ffd94b4f488) at ../job-qmp.c:138
->
-#26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
->
-ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
->
-#27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
->
-../qapi/qmp-dispatch.c:128
->
-#28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
->
-../util/async.c:172
->
-#29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
->
-../util/async.c:219
->
-#30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
->
-../util/aio-posix.c:436
->
-#31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
->
-callback=0x0, user_data=0x0) at ../util/async.c:361
->
-#32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
->
-../glib/gmain.c:3364
->
-#33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
->
-#34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
->
-#35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
->
-../util/main-loop.c:310
->
-#36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
->
-../util/main-loop.c:589
->
-#37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
->
-#38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
->
-../system/main.c:50
->
-#39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
->
-../system/main.c:80
-And here's coroutine trying to acquire read lock:
-
->
-(gdb) qemu coroutine reader_queue->entries.sqh_first
->
-#0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
->
-to_=0x7fc537fff508, action=COROUTINE_YIELD) at
->
-../util/coroutine-ucontext.c:321
->
-#1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
->
-../util/qemu-coroutine.c:339
->
-#2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
->
-<reader_queue>, lock=0x7fc53c57de50, flags=0) at
->
-../util/qemu-coroutine-lock.c:60
->
-#3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at ../block/graph-lock.c:231
->
-#4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at
->
-/home/root/src/qemu/master/include/block/graph-lock.h:213
->
-#5  0x0000557eb460fa41 in blk_co_do_preadv_part
->
-(blk=0x557eb84c0810, offset=6890553344, bytes=4096, qiov=0x7fc530006988,
->
-qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at ../block/block-backend.c:1339
->
-#6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
->
-../block/block-backend.c:1619
->
-#7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886) at
->
-../util/coroutine-ucontext.c:175
->
-#8  0x00007fc547c2a360 in __start_context () at
->
-../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
->
-#9  0x00007ffd94b4ea40 in  ()
->
-#10 0x0000000000000000 in  ()
-So it looks like main thread is processing job-dismiss request and is
-holding write lock taken in block_job_remove_all_bdrv() (frame #20
-above).  At the same time iothread spawns a coroutine which performs IO
-request.  Before the coroutine is spawned, blk_aio_prwv() increases
-'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
-trying to acquire the read lock.  But main thread isn't releasing the
-lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
-Here's the deadlock.
-
-Any comments and suggestions on the subject are welcomed.  Thanks!
-
-Andrey
-remove_lower_snap.sh
-Description:
-application/shellscript
-
-On 4/24/25 8:32 PM, Andrey Drobyshev wrote:
->
-Hi all,
->
->
-There's a bug in block layer which leads to block graph deadlock.
->
-Notably, it takes place when blockdev IO is processed within a separate
->
-iothread.
->
->
-This was initially caught by our tests, and I was able to reduce it to a
->
-relatively simple reproducer.  Such deadlocks are probably supposed to
->
-be covered in iotests/graph-changes-while-io, but this deadlock isn't.
->
->
-Basically what the reproducer does is launches QEMU with a drive having
->
-'iothread' option set, creates a chain of 2 snapshots, launches
->
-block-commit job for a snapshot and then dismisses the job, starting
->
-from the lower snapshot.  If the guest is issuing IO at the same time,
->
-there's a race in acquiring block graph lock and a potential deadlock.
->
->
-Here's how it can be reproduced:
->
->
-[...]
->
-I took a closer look at iotests/graph-changes-while-io, and have managed
-to reproduce the same deadlock in a much simpler setup, without a guest.
-
-1. Run QSD:> ./build/storage-daemon/qemu-storage-daemon --object
-iothread,id=iothread0 \
->
---blockdev null-co,node-name=node0,read-zeroes=true \
->
->
---nbd-server addr.type=unix,addr.path=/var/run/qsd_nbd.sock \
->
->
---export
->
-nbd,id=exp0,node-name=node0,iothread=iothread0,fixed-iothread=true,writable=true
->
-\
->
---chardev
->
-socket,id=qmp-sock,path=/var/run/qsd_qmp.sock,server=on,wait=off \
->
---monitor chardev=qmp-sock
-2. Launch IO:
->
-qemu-img bench -f raw -c 2000000
->
-'nbd+unix:///node0?socket=/var/run/qsd_nbd.sock'
-3. Add 2 snapshots and remove lower one (script attached):> while
-/bin/true ; do ./rls_qsd.sh ; done
-
-And then it hangs.
-
-I'll also send a patch with corresponding test case added directly to
-iotests.
-
-This reproduce seems to be hanging starting from Fiona's commit
-67446e605dc ("blockjob: drop AioContext lock before calling
-bdrv_graph_wrlock()").  AioContext locks were dropped entirely later on
-in Stefan's commit b49f4755c7 ("block: remove AioContext locking"), but
-the problem remains.
-
-Andrey
-rls_qsd.sh
-Description:
-application/shellscript
-
-From: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
-
-This case is catching potential deadlock which takes place when job-dismiss
-is issued when I/O requests are processed in a separate iothread.
-
-See
-https://mail.gnu.org/archive/html/qemu-devel/2025-04/msg04421.html
-Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
----
- .../qemu-iotests/tests/graph-changes-while-io | 101 ++++++++++++++++--
- .../tests/graph-changes-while-io.out          |   4 +-
- 2 files changed, 96 insertions(+), 9 deletions(-)
-
-diff --git a/tests/qemu-iotests/tests/graph-changes-while-io 
-b/tests/qemu-iotests/tests/graph-changes-while-io
-index 194fda500e..e30f823da4 100755
---- a/tests/qemu-iotests/tests/graph-changes-while-io
-+++ b/tests/qemu-iotests/tests/graph-changes-while-io
-@@ -27,6 +27,8 @@ from iotests import imgfmt, qemu_img, qemu_img_create, 
-qemu_io, \
- 
- 
- top = os.path.join(iotests.test_dir, 'top.img')
-+snap1 = os.path.join(iotests.test_dir, 'snap1.img')
-+snap2 = os.path.join(iotests.test_dir, 'snap2.img')
- nbd_sock = os.path.join(iotests.sock_dir, 'nbd.sock')
- 
- 
-@@ -58,6 +60,15 @@ class TestGraphChangesWhileIO(QMPTestCase):
-     def tearDown(self) -> None:
-         self.qsd.stop()
- 
-+    def _wait_for_blockjob(self, status) -> None:
-+        done = False
-+        while not done:
-+            for event in self.qsd.get_qmp().get_events(wait=10.0):
-+                if event['event'] != 'JOB_STATUS_CHANGE':
-+                    continue
-+                if event['data']['status'] == status:
-+                    done = True
-+
-     def test_blockdev_add_while_io(self) -> None:
-         # Run qemu-img bench in the background
-         bench_thr = Thread(target=do_qemu_img_bench)
-@@ -116,13 +127,89 @@ class TestGraphChangesWhileIO(QMPTestCase):
-                 'device': 'job0',
-             })
- 
--            cancelled = False
--            while not cancelled:
--                for event in self.qsd.get_qmp().get_events(wait=10.0):
--                    if event['event'] != 'JOB_STATUS_CHANGE':
--                        continue
--                    if event['data']['status'] == 'null':
--                        cancelled = True
-+            self._wait_for_blockjob('null')
-+
-+        bench_thr.join()
-+
-+    def test_remove_lower_snapshot_while_io(self) -> None:
-+        # Run qemu-img bench in the background
-+        bench_thr = Thread(target=do_qemu_img_bench, args=(100000, ))
-+        bench_thr.start()
-+
-+        # While I/O is performed on 'node0' node, consequently add 2 snapshots
-+        # on top of it, then remove (commit) them starting from lower one.
-+        while bench_thr.is_alive():
-+            # Recreate snapshot images on every iteration
-+            qemu_img_create('-f', imgfmt, snap1, '1G')
-+            qemu_img_create('-f', imgfmt, snap2, '1G')
-+
-+            self.qsd.cmd('blockdev-add', {
-+                'driver': imgfmt,
-+                'node-name': 'snap1',
-+                'file': {
-+                    'driver': 'file',
-+                    'filename': snap1
-+                }
-+            })
-+
-+            self.qsd.cmd('blockdev-snapshot', {
-+                'node': 'node0',
-+                'overlay': 'snap1',
-+            })
-+
-+            self.qsd.cmd('blockdev-add', {
-+                'driver': imgfmt,
-+                'node-name': 'snap2',
-+                'file': {
-+                    'driver': 'file',
-+                    'filename': snap2
-+                }
-+            })
-+
-+            self.qsd.cmd('blockdev-snapshot', {
-+                'node': 'snap1',
-+                'overlay': 'snap2',
-+            })
-+
-+            self.qsd.cmd('block-commit', {
-+                'job-id': 'commit-snap1',
-+                'device': 'snap2',
-+                'top-node': 'snap1',
-+                'base-node': 'node0',
-+                'auto-finalize': True,
-+                'auto-dismiss': False,
-+            })
-+
-+            self._wait_for_blockjob('concluded')
-+            self.qsd.cmd('job-dismiss', {
-+                'id': 'commit-snap1',
-+            })
-+
-+            self.qsd.cmd('block-commit', {
-+                'job-id': 'commit-snap2',
-+                'device': 'snap2',
-+                'top-node': 'snap2',
-+                'base-node': 'node0',
-+                'auto-finalize': True,
-+                'auto-dismiss': False,
-+            })
-+
-+            self._wait_for_blockjob('ready')
-+            self.qsd.cmd('job-complete', {
-+                'id': 'commit-snap2',
-+            })
-+
-+            self._wait_for_blockjob('concluded')
-+            self.qsd.cmd('job-dismiss', {
-+                'id': 'commit-snap2',
-+            })
-+
-+            self.qsd.cmd('blockdev-del', {
-+                'node-name': 'snap1'
-+            })
-+            self.qsd.cmd('blockdev-del', {
-+                'node-name': 'snap2'
-+            })
- 
-         bench_thr.join()
- 
-diff --git a/tests/qemu-iotests/tests/graph-changes-while-io.out 
-b/tests/qemu-iotests/tests/graph-changes-while-io.out
-index fbc63e62f8..8d7e996700 100644
---- a/tests/qemu-iotests/tests/graph-changes-while-io.out
-+++ b/tests/qemu-iotests/tests/graph-changes-while-io.out
-@@ -1,5 +1,5 @@
--..
-+...
- ----------------------------------------------------------------------
--Ran 2 tests
-+Ran 3 tests
- 
- OK
--- 
-2.43.5
-
-Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
->
-So it looks like main thread is processing job-dismiss request and is
->
-holding write lock taken in block_job_remove_all_bdrv() (frame #20
->
-above).  At the same time iothread spawns a coroutine which performs IO
->
-request.  Before the coroutine is spawned, blk_aio_prwv() increases
->
-'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
->
-trying to acquire the read lock.  But main thread isn't releasing the
->
-lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
->
-Here's the deadlock.
-And for the IO test you provided, it's client->nb_requests that behaves
-similarly to blk->in_flight here.
-
-The issue also reproduces easily when issuing the following QMP command
-in a loop while doing IO on a device:
-
->
-void qmp_block_locked_drain(const char *node_name, Error **errp)
->
-{
->
-BlockDriverState *bs;
->
->
-bs = bdrv_find_node(node_name);
->
-if (!bs) {
->
-error_setg(errp, "node not found");
->
-return;
->
-}
->
->
-bdrv_graph_wrlock();
->
-bdrv_drained_begin(bs);
->
-bdrv_drained_end(bs);
->
-bdrv_graph_wrunlock();
->
-}
-It seems like either it would be necessary to require:
-1. not draining inside an exclusively locked section
-or
-2. making sure that variables used by drained_poll routines are only set
-while holding the reader lock
-?
-
-Those seem to require rather involved changes, so a third option might
-be to make draining inside an exclusively locked section possible, by
-embedding such locked sections in a drained section:
-
->
-diff --git a/blockjob.c b/blockjob.c
->
-index 32007f31a9..9b2f3b3ea9 100644
->
---- a/blockjob.c
->
-+++ b/blockjob.c
->
-@@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
-* one to make sure that such a concurrent access does not attempt
->
-* to process an already freed BdrvChild.
->
-*/
->
-+    bdrv_drain_all_begin();
->
-bdrv_graph_wrlock();
->
-while (job->nodes) {
->
-GSList *l = job->nodes;
->
-@@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
-g_slist_free_1(l);
->
-}
->
-bdrv_graph_wrunlock();
->
-+    bdrv_drain_all_end();
->
-}
->
->
-bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
-This seems to fix the issue at hand. I can send a patch if this is
-considered an acceptable approach.
-
-Best Regards,
-Fiona
-
-On 4/30/25 11:47 AM, Fiona Ebner wrote:
->
-Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
->
-> So it looks like main thread is processing job-dismiss request and is
->
-> holding write lock taken in block_job_remove_all_bdrv() (frame #20
->
-> above).  At the same time iothread spawns a coroutine which performs IO
->
-> request.  Before the coroutine is spawned, blk_aio_prwv() increases
->
-> 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
->
-> trying to acquire the read lock.  But main thread isn't releasing the
->
-> lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
->
-> Here's the deadlock.
->
->
-And for the IO test you provided, it's client->nb_requests that behaves
->
-similarly to blk->in_flight here.
->
->
-The issue also reproduces easily when issuing the following QMP command
->
-in a loop while doing IO on a device:
->
->
-> void qmp_block_locked_drain(const char *node_name, Error **errp)
->
-> {
->
->     BlockDriverState *bs;
->
->
->
->     bs = bdrv_find_node(node_name);
->
->     if (!bs) {
->
->         error_setg(errp, "node not found");
->
->         return;
->
->     }
->
->
->
->     bdrv_graph_wrlock();
->
->     bdrv_drained_begin(bs);
->
->     bdrv_drained_end(bs);
->
->     bdrv_graph_wrunlock();
->
-> }
->
->
-It seems like either it would be necessary to require:
->
-1. not draining inside an exclusively locked section
->
-or
->
-2. making sure that variables used by drained_poll routines are only set
->
-while holding the reader lock
->
-?
->
->
-Those seem to require rather involved changes, so a third option might
->
-be to make draining inside an exclusively locked section possible, by
->
-embedding such locked sections in a drained section:
->
->
-> diff --git a/blockjob.c b/blockjob.c
->
-> index 32007f31a9..9b2f3b3ea9 100644
->
-> --- a/blockjob.c
->
-> +++ b/blockjob.c
->
-> @@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
->       * one to make sure that such a concurrent access does not attempt
->
->       * to process an already freed BdrvChild.
->
->       */
->
-> +    bdrv_drain_all_begin();
->
->      bdrv_graph_wrlock();
->
->      while (job->nodes) {
->
->          GSList *l = job->nodes;
->
-> @@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
->          g_slist_free_1(l);
->
->      }
->
->      bdrv_graph_wrunlock();
->
-> +    bdrv_drain_all_end();
->
->  }
->
->
->
->  bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
->
->
-This seems to fix the issue at hand. I can send a patch if this is
->
-considered an acceptable approach.
->
->
-Best Regards,
->
-Fiona
->
-Hello Fiona,
-
-Thanks for looking into it.  I've tried your 3rd option above and can
-confirm it does fix the deadlock, at least I can't reproduce it.  Other
-iotests also don't seem to be breaking.  So I personally am fine with
-that patch.  Would be nice to hear a word from the maintainers though on
-whether there're any caveats with such approach.
-
-Andrey
-
-On Wed, Apr 30, 2025 at 10:11 AM Andrey Drobyshev
-<andrey.drobyshev@virtuozzo.com> wrote:
->
->
-On 4/30/25 11:47 AM, Fiona Ebner wrote:
->
-> Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
->
->> So it looks like main thread is processing job-dismiss request and is
->
->> holding write lock taken in block_job_remove_all_bdrv() (frame #20
->
->> above).  At the same time iothread spawns a coroutine which performs IO
->
->> request.  Before the coroutine is spawned, blk_aio_prwv() increases
->
->> 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
->
->> trying to acquire the read lock.  But main thread isn't releasing the
->
->> lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
->
->> Here's the deadlock.
->
->
->
-> And for the IO test you provided, it's client->nb_requests that behaves
->
-> similarly to blk->in_flight here.
->
->
->
-> The issue also reproduces easily when issuing the following QMP command
->
-> in a loop while doing IO on a device:
->
->
->
->> void qmp_block_locked_drain(const char *node_name, Error **errp)
->
->> {
->
->>     BlockDriverState *bs;
->
->>
->
->>     bs = bdrv_find_node(node_name);
->
->>     if (!bs) {
->
->>         error_setg(errp, "node not found");
->
->>         return;
->
->>     }
->
->>
->
->>     bdrv_graph_wrlock();
->
->>     bdrv_drained_begin(bs);
->
->>     bdrv_drained_end(bs);
->
->>     bdrv_graph_wrunlock();
->
->> }
->
->
->
-> It seems like either it would be necessary to require:
->
-> 1. not draining inside an exclusively locked section
->
-> or
->
-> 2. making sure that variables used by drained_poll routines are only set
->
-> while holding the reader lock
->
-> ?
->
->
->
-> Those seem to require rather involved changes, so a third option might
->
-> be to make draining inside an exclusively locked section possible, by
->
-> embedding such locked sections in a drained section:
->
->
->
->> diff --git a/blockjob.c b/blockjob.c
->
->> index 32007f31a9..9b2f3b3ea9 100644
->
->> --- a/blockjob.c
->
->> +++ b/blockjob.c
->
->> @@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
->>       * one to make sure that such a concurrent access does not attempt
->
->>       * to process an already freed BdrvChild.
->
->>       */
->
->> +    bdrv_drain_all_begin();
->
->>      bdrv_graph_wrlock();
->
->>      while (job->nodes) {
->
->>          GSList *l = job->nodes;
->
->> @@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
->
->>          g_slist_free_1(l);
->
->>      }
->
->>      bdrv_graph_wrunlock();
->
->> +    bdrv_drain_all_end();
->
->>  }
->
->>
->
->>  bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
->
->
->
-> This seems to fix the issue at hand. I can send a patch if this is
->
-> considered an acceptable approach.
-Kevin is aware of this thread but it's a public holiday tomorrow so it
-may be a little longer.
-
-Stefan
-
-Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
->
-Hi all,
->
->
-There's a bug in block layer which leads to block graph deadlock.
->
-Notably, it takes place when blockdev IO is processed within a separate
->
-iothread.
->
->
-This was initially caught by our tests, and I was able to reduce it to a
->
-relatively simple reproducer.  Such deadlocks are probably supposed to
->
-be covered in iotests/graph-changes-while-io, but this deadlock isn't.
->
->
-Basically what the reproducer does is launches QEMU with a drive having
->
-'iothread' option set, creates a chain of 2 snapshots, launches
->
-block-commit job for a snapshot and then dismisses the job, starting
->
-from the lower snapshot.  If the guest is issuing IO at the same time,
->
-there's a race in acquiring block graph lock and a potential deadlock.
->
->
-Here's how it can be reproduced:
->
->
-1. Run QEMU:
->
-> SRCDIR=/path/to/srcdir
->
->
->
->
->
->
->
->
->
-> $SRCDIR/build/qemu-system-x86_64 -enable-kvm \
->
->
->
->   -machine q35 -cpu Nehalem \
->
->
->
->   -name guest=alma8-vm,debug-threads=on \
->
->
->
->   -m 2g -smp 2 \
->
->
->
->   -nographic -nodefaults \
->
->
->
->   -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
->
->
->
->   -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
->
->
->
->   -object iothread,id=iothread0 \
->
->
->
->   -blockdev
->
-> node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
->
->  \
->
->   -device virtio-blk-pci,drive=disk,iothread=iothread0
->
->
-2. Launch IO (random reads) from within the guest:
->
-> nc -U /var/run/alma8-serial.sock
->
-> ...
->
-> [root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k
->
-> --size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting
->
-> --rw=randread --iodepth=1 --filename=/testfile
->
->
-3. Run snapshots creation & removal of lower snapshot operation in a
->
-loop (script attached):
->
-> while /bin/true ; do ./remove_lower_snap.sh ; done
->
->
-And then it occasionally hangs.
->
->
-Note: I've tried bisecting this, and looks like deadlock occurs starting
->
-from the following commit:
->
->
-(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
->
-(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
->
->
-On the latest v10.0.0 it does hang as well.
->
->
->
-Here's backtrace of the main thread:
->
->
-> #0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
->
-> timeout=<optimized out>, sigmask=0x0) at
->
-> ../sysdeps/unix/sysv/linux/ppoll.c:43
->
-> #1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
->
-> timeout=-1) at ../util/qemu-timer.c:329
->
-> #2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
->
-> ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
->
-> #3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at
->
-> ../util/aio-posix.c:730
->
-> #4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
->
-> parent=0x0, poll=true) at ../block/io.c:378
->
-> #5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
->
-> ../block/io.c:391
->
-> #6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7682
->
-> #7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7608
->
-> #8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7668
->
-> #9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7608
->
-> #10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7668
->
-> #11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7608
->
-> #12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../blockjob.c:157
->
-> #13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7592
->
-> #14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7661
->
-> #15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
->
->     (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 =
->
-> {...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
->
-> #16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7592
->
-> #17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
->
-> errp=0x0)
->
->     at ../block.c:7661
->
-> #18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0,
->
-> ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
->
-> #19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at
->
-> ../block.c:3317
->
-> #20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at
->
-> ../blockjob.c:209
->
-> #21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
->
-> ../blockjob.c:82
->
-> #22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
->
-> ../job.c:474
->
-> #23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
->
-> ../job.c:771
->
-> #24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
->
-> errp=0x7ffd94b4f488) at ../job.c:783
->
-> --Type <RET> for more, q to quit, c to continue without paging--
->
-> #25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0
->
-> "commit-snap1", errp=0x7ffd94b4f488) at ../job-qmp.c:138
->
-> #26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
->
-> ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
->
-> #27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
->
-> ../qapi/qmp-dispatch.c:128
->
-> #28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
->
-> ../util/async.c:172
->
-> #29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
->
-> ../util/async.c:219
->
-> #30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
->
-> ../util/aio-posix.c:436
->
-> #31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
->
-> callback=0x0, user_data=0x0) at ../util/async.c:361
->
-> #32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
->
-> ../glib/gmain.c:3364
->
-> #33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
->
-> #34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
->
-> #35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
->
-> ../util/main-loop.c:310
->
-> #36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
->
-> ../util/main-loop.c:589
->
-> #37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
->
-> #38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
->
-> ../system/main.c:50
->
-> #39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
->
-> ../system/main.c:80
->
->
->
-And here's coroutine trying to acquire read lock:
->
->
-> (gdb) qemu coroutine reader_queue->entries.sqh_first
->
-> #0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
->
-> to_=0x7fc537fff508, action=COROUTINE_YIELD) at
->
-> ../util/coroutine-ucontext.c:321
->
-> #1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
->
-> ../util/qemu-coroutine.c:339
->
-> #2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
->
-> <reader_queue>, lock=0x7fc53c57de50, flags=0) at
->
-> ../util/qemu-coroutine-lock.c:60
->
-> #3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at
->
-> ../block/graph-lock.c:231
->
-> #4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at
->
-> /home/root/src/qemu/master/include/block/graph-lock.h:213
->
-> #5  0x0000557eb460fa41 in blk_co_do_preadv_part
->
->     (blk=0x557eb84c0810, offset=6890553344, bytes=4096,
->
-> qiov=0x7fc530006988, qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at
->
-> ../block/block-backend.c:1339
->
-> #6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
->
-> ../block/block-backend.c:1619
->
-> #7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886)
->
-> at ../util/coroutine-ucontext.c:175
->
-> #8  0x00007fc547c2a360 in __start_context () at
->
-> ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
->
-> #9  0x00007ffd94b4ea40 in  ()
->
-> #10 0x0000000000000000 in  ()
->
->
->
-So it looks like main thread is processing job-dismiss request and is
->
-holding write lock taken in block_job_remove_all_bdrv() (frame #20
->
-above).  At the same time iothread spawns a coroutine which performs IO
->
-request.  Before the coroutine is spawned, blk_aio_prwv() increases
->
-'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
->
-trying to acquire the read lock.  But main thread isn't releasing the
->
-lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
->
-Here's the deadlock.
->
->
-Any comments and suggestions on the subject are welcomed.  Thanks!
-I think this is what the blk_wait_while_drained() call was supposed to
-address in blk_co_do_preadv_part(). However, with the use of multiple
-I/O threads, this is racy.
-
-Do you think that in your case we hit the small race window between the
-checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
-another reason why blk_wait_while_drained() didn't do its job?
-
-Kevin
-
-On 5/2/25 19:34, Kevin Wolf wrote:
-Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
-Hi all,
-
-There's a bug in block layer which leads to block graph deadlock.
-Notably, it takes place when blockdev IO is processed within a separate
-iothread.
-
-This was initially caught by our tests, and I was able to reduce it to a
-relatively simple reproducer.  Such deadlocks are probably supposed to
-be covered in iotests/graph-changes-while-io, but this deadlock isn't.
-
-Basically what the reproducer does is launches QEMU with a drive having
-'iothread' option set, creates a chain of 2 snapshots, launches
-block-commit job for a snapshot and then dismisses the job, starting
-from the lower snapshot.  If the guest is issuing IO at the same time,
-there's a race in acquiring block graph lock and a potential deadlock.
-
-Here's how it can be reproduced:
-
-1. Run QEMU:
-SRCDIR=/path/to/srcdir
-$SRCDIR/build/qemu-system-x86_64 -enable-kvm \
--machine q35 -cpu Nehalem \
-   -name guest=alma8-vm,debug-threads=on \
-   -m 2g -smp 2 \
-   -nographic -nodefaults \
-   -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
-   -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
-   -object iothread,id=iothread0 \
-   -blockdev 
-node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
- \
-   -device virtio-blk-pci,drive=disk,iothread=iothread0
-2. Launch IO (random reads) from within the guest:
-nc -U /var/run/alma8-serial.sock
-...
-[root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k 
---size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting 
---rw=randread --iodepth=1 --filename=/testfile
-3. Run snapshots creation & removal of lower snapshot operation in a
-loop (script attached):
-while /bin/true ; do ./remove_lower_snap.sh ; done
-And then it occasionally hangs.
-
-Note: I've tried bisecting this, and looks like deadlock occurs starting
-from the following commit:
-
-(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
-(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
-
-On the latest v10.0.0 it does hang as well.
-
-
-Here's backtrace of the main thread:
-#0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1, timeout=<optimized 
-out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:43
-#1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1, timeout=-1) 
-at ../util/qemu-timer.c:329
-#2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20, 
-ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
-#3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at 
-../util/aio-posix.c:730
-#4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950, parent=0x0, 
-poll=true) at ../block/io.c:378
-#5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at 
-../block/io.c:391
-#6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7682
-#7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7608
-#8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7668
-#9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7608
-#10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7668
-#11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7608
-#12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../blockjob.c:157
-#13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7592
-#14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7661
-#15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
-     (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, 
-tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
-#16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7592
-#17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0, 
-ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
-errp=0x0)
-     at ../block.c:7661
-#18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0, 
-ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
-#19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at 
-../block.c:3317
-#20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at 
-../blockjob.c:209
-#21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at 
-../blockjob.c:82
-#22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at ../job.c:474
-#23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at 
-../job.c:771
-#24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400, 
-errp=0x7ffd94b4f488) at ../job.c:783
---Type <RET> for more, q to quit, c to continue without paging--
-#25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0 "commit-snap1", 
-errp=0x7ffd94b4f488) at ../job-qmp.c:138
-#26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0, 
-ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
-#27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at 
-../qapi/qmp-dispatch.c:128
-#28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at ../util/async.c:172
-#29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at 
-../util/async.c:219
-#30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at 
-../util/aio-posix.c:436
-#31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200, 
-callback=0x0, user_data=0x0) at ../util/async.c:361
-#32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at 
-../glib/gmain.c:3364
-#33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
-#34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
-#35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at 
-../util/main-loop.c:310
-#36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at 
-../util/main-loop.c:589
-#37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
-#38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at ../system/main.c:50
-#39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at 
-../system/main.c:80
-And here's coroutine trying to acquire read lock:
-(gdb) qemu coroutine reader_queue->entries.sqh_first
-#0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0, 
-to_=0x7fc537fff508, action=COROUTINE_YIELD) at ../util/coroutine-ucontext.c:321
-#1  0x0000557eb47d4d4a in qemu_coroutine_yield () at 
-../util/qemu-coroutine.c:339
-#2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0 
-<reader_queue>, lock=0x7fc53c57de50, flags=0) at 
-../util/qemu-coroutine-lock.c:60
-#3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at ../block/graph-lock.c:231
-#4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at 
-/home/root/src/qemu/master/include/block/graph-lock.h:213
-#5  0x0000557eb460fa41 in blk_co_do_preadv_part
-     (blk=0x557eb84c0810, offset=6890553344, bytes=4096, qiov=0x7fc530006988, 
-qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at ../block/block-backend.c:1339
-#6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at 
-../block/block-backend.c:1619
-#7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886) at 
-../util/coroutine-ucontext.c:175
-#8  0x00007fc547c2a360 in __start_context () at 
-../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
-#9  0x00007ffd94b4ea40 in  ()
-#10 0x0000000000000000 in  ()
-So it looks like main thread is processing job-dismiss request and is
-holding write lock taken in block_job_remove_all_bdrv() (frame #20
-above).  At the same time iothread spawns a coroutine which performs IO
-request.  Before the coroutine is spawned, blk_aio_prwv() increases
-'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
-trying to acquire the read lock.  But main thread isn't releasing the
-lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
-Here's the deadlock.
-
-Any comments and suggestions on the subject are welcomed.  Thanks!
-I think this is what the blk_wait_while_drained() call was supposed to
-address in blk_co_do_preadv_part(). However, with the use of multiple
-I/O threads, this is racy.
-
-Do you think that in your case we hit the small race window between the
-checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
-another reason why blk_wait_while_drained() didn't do its job?
-
-Kevin
-At my opinion there is very big race window. Main thread has
-eaten graph write lock. After that another coroutine is stalled
-within GRAPH_RDLOCK_GUARD() as there is no drain at the moment and only
-after that main thread has started drain. That is why Fiona's idea is
-looking working. Though this would mean that normally we should always
-do that at the moment when we acquire write lock. May be even inside
-this function. Den
-
-Am 02.05.2025 um 19:52 hat Denis V. Lunev geschrieben:
->
-On 5/2/25 19:34, Kevin Wolf wrote:
->
-> Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
->
-> > Hi all,
->
-> >
->
-> > There's a bug in block layer which leads to block graph deadlock.
->
-> > Notably, it takes place when blockdev IO is processed within a separate
->
-> > iothread.
->
-> >
->
-> > This was initially caught by our tests, and I was able to reduce it to a
->
-> > relatively simple reproducer.  Such deadlocks are probably supposed to
->
-> > be covered in iotests/graph-changes-while-io, but this deadlock isn't.
->
-> >
->
-> > Basically what the reproducer does is launches QEMU with a drive having
->
-> > 'iothread' option set, creates a chain of 2 snapshots, launches
->
-> > block-commit job for a snapshot and then dismisses the job, starting
->
-> > from the lower snapshot.  If the guest is issuing IO at the same time,
->
-> > there's a race in acquiring block graph lock and a potential deadlock.
->
-> >
->
-> > Here's how it can be reproduced:
->
-> >
->
-> > 1. Run QEMU:
->
-> > > SRCDIR=/path/to/srcdir
->
-> > > $SRCDIR/build/qemu-system-x86_64 -enable-kvm \
->
-> > >    -machine q35 -cpu Nehalem \
->
-> > >    -name guest=alma8-vm,debug-threads=on \
->
-> > >    -m 2g -smp 2 \
->
-> > >    -nographic -nodefaults \
->
-> > >    -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
->
-> > >    -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
->
-> > >    -object iothread,id=iothread0 \
->
-> > >    -blockdev
->
-> > > node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
->
-> > >  \
->
-> > >    -device virtio-blk-pci,drive=disk,iothread=iothread0
->
-> > 2. Launch IO (random reads) from within the guest:
->
-> > > nc -U /var/run/alma8-serial.sock
->
-> > > ...
->
-> > > [root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1
->
-> > > --bs=4k --size=1G --numjobs=1 --time_based=1 --runtime=300
->
-> > > --group_reporting --rw=randread --iodepth=1 --filename=/testfile
->
-> > 3. Run snapshots creation & removal of lower snapshot operation in a
->
-> > loop (script attached):
->
-> > > while /bin/true ; do ./remove_lower_snap.sh ; done
->
-> > And then it occasionally hangs.
->
-> >
->
-> > Note: I've tried bisecting this, and looks like deadlock occurs starting
->
-> > from the following commit:
->
-> >
->
-> > (BAD)  5bdbaebcce virtio: Re-enable notifications after drain
->
-> > (GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
->
-> >
->
-> > On the latest v10.0.0 it does hang as well.
->
-> >
->
-> >
->
-> > Here's backtrace of the main thread:
->
-> >
->
-> > > #0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
->
-> > > timeout=<optimized out>, sigmask=0x0) at
->
-> > > ../sysdeps/unix/sysv/linux/ppoll.c:43
->
-> > > #1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
->
-> > > timeout=-1) at ../util/qemu-timer.c:329
->
-> > > #2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
->
-> > > ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
->
-> > > #3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true)
->
-> > > at ../util/aio-posix.c:730
->
-> > > #4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
->
-> > > parent=0x0, poll=true) at ../block/io.c:378
->
-> > > #5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
->
-> > > ../block/io.c:391
->
-> > > #6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7682
->
-> > > #7  0x0000557eb45ebf2b in bdrv_child_change_aio_context
->
-> > > (c=0x557eb7964250, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7608
->
-> > > #8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7668
->
-> > > #9  0x0000557eb45ebf2b in bdrv_child_change_aio_context
->
-> > > (c=0x557eb7e59110, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7608
->
-> > > #10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7668
->
-> > > #11 0x0000557eb45ebf2b in bdrv_child_change_aio_context
->
-> > > (c=0x557eb814ed80, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7608
->
-> > > #12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../blockjob.c:157
->
-> > > #13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context
->
-> > > (c=0x557eb7c9d3f0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7592
->
-> > > #14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7661
->
-> > > #15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
->
-> > >      (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60
->
-> > > = {...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
->
-> > > #16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context
->
-> > > (c=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7592
->
-> > > #17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
->
-> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
->
-> > > tran=0x557eb7a87160, errp=0x0)
->
-> > >      at ../block.c:7661
->
-> > > #18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context
->
-> > > (bs=0x557eb79575e0, ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at
->
-> > > ../block.c:7715
->
-> > > #19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30)
->
-> > > at ../block.c:3317
->
-> > > #20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv
->
-> > > (job=0x557eb7952800) at ../blockjob.c:209
->
-> > > #21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
->
-> > > ../blockjob.c:82
->
-> > > #22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
->
-> > > ../job.c:474
->
-> > > #23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
->
-> > > ../job.c:771
->
-> > > #24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
->
-> > > errp=0x7ffd94b4f488) at ../job.c:783
->
-> > > --Type <RET> for more, q to quit, c to continue without paging--
->
-> > > #25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0
->
-> > > "commit-snap1", errp=0x7ffd94b4f488) at ../job-qmp.c:138
->
-> > > #26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
->
-> > > ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
->
-> > > #27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
->
-> > > ../qapi/qmp-dispatch.c:128
->
-> > > #28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
->
-> > > ../util/async.c:172
->
-> > > #29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
->
-> > > ../util/async.c:219
->
-> > > #30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
->
-> > > ../util/aio-posix.c:436
->
-> > > #31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
->
-> > > callback=0x0, user_data=0x0) at ../util/async.c:361
->
-> > > #32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
->
-> > > ../glib/gmain.c:3364
->
-> > > #33 g_main_context_dispatch (context=0x557eb76c6430) at
->
-> > > ../glib/gmain.c:4079
->
-> > > #34 0x0000557eb47d3ab1 in glib_pollfds_poll () at
->
-> > > ../util/main-loop.c:287
->
-> > > #35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
->
-> > > ../util/main-loop.c:310
->
-> > > #36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
->
-> > > ../util/main-loop.c:589
->
-> > > #37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
->
-> > > #38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
->
-> > > ../system/main.c:50
->
-> > > #39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
->
-> > > ../system/main.c:80
->
-> >
->
-> > And here's coroutine trying to acquire read lock:
->
-> >
->
-> > > (gdb) qemu coroutine reader_queue->entries.sqh_first
->
-> > > #0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
->
-> > > to_=0x7fc537fff508, action=COROUTINE_YIELD) at
->
-> > > ../util/coroutine-ucontext.c:321
->
-> > > #1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
->
-> > > ../util/qemu-coroutine.c:339
->
-> > > #2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
->
-> > > <reader_queue>, lock=0x7fc53c57de50, flags=0) at
->
-> > > ../util/qemu-coroutine-lock.c:60
->
-> > > #3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at
->
-> > > ../block/graph-lock.c:231
->
-> > > #4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3)
->
-> > > at /home/root/src/qemu/master/include/block/graph-lock.h:213
->
-> > > #5  0x0000557eb460fa41 in blk_co_do_preadv_part
->
-> > >      (blk=0x557eb84c0810, offset=6890553344, bytes=4096,
->
-> > > qiov=0x7fc530006988, qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at
->
-> > > ../block/block-backend.c:1339
->
-> > > #6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
->
-> > > ../block/block-backend.c:1619
->
-> > > #7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040,
->
-> > > i1=21886) at ../util/coroutine-ucontext.c:175
->
-> > > #8  0x00007fc547c2a360 in __start_context () at
->
-> > > ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
->
-> > > #9  0x00007ffd94b4ea40 in  ()
->
-> > > #10 0x0000000000000000 in  ()
->
-> >
->
-> > So it looks like main thread is processing job-dismiss request and is
->
-> > holding write lock taken in block_job_remove_all_bdrv() (frame #20
->
-> > above).  At the same time iothread spawns a coroutine which performs IO
->
-> > request.  Before the coroutine is spawned, blk_aio_prwv() increases
->
-> > 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
->
-> > trying to acquire the read lock.  But main thread isn't releasing the
->
-> > lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
->
-> > Here's the deadlock.
->
-> >
->
-> > Any comments and suggestions on the subject are welcomed.  Thanks!
->
-> I think this is what the blk_wait_while_drained() call was supposed to
->
-> address in blk_co_do_preadv_part(). However, with the use of multiple
->
-> I/O threads, this is racy.
->
->
->
-> Do you think that in your case we hit the small race window between the
->
-> checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
->
-> another reason why blk_wait_while_drained() didn't do its job?
->
->
->
-At my opinion there is very big race window. Main thread has
->
-eaten graph write lock. After that another coroutine is stalled
->
-within GRAPH_RDLOCK_GUARD() as there is no drain at the moment and only
->
-after that main thread has started drain.
-You're right, I confused taking the write lock with draining there.
-
->
-That is why Fiona's idea is looking working. Though this would mean
->
-that normally we should always do that at the moment when we acquire
->
-write lock. May be even inside this function.
-I actually see now that not all of my graph locking patches were merged.
-At least I did have the thought that bdrv_drained_begin() must be marked
-GRAPH_UNLOCKED because it polls. That means that calling it from inside
-bdrv_try_change_aio_context() is actually forbidden (and that's the part
-I didn't see back then because it doesn't have TSA annotations).
-
-If you refactor the code to move the drain out to before the lock is
-taken, I think you end up with Fiona's patch, except you'll remove the
-forbidden inner drain and add more annotations for some functions and
-clarify the rules around them. I don't know, but I wouldn't be surprised
-if along the process we find other bugs, too.
-
-So Fiona's drain looks right to me, but we should probably approach it
-more systematically.
-
-Kevin
-
diff --git a/results/classifier/005/device/24930826 b/results/classifier/005/device/24930826
deleted file mode 100644
index b4e6bcf3..00000000
--- a/results/classifier/005/device/24930826
+++ /dev/null
@@ -1,41 +0,0 @@
-device: 0.709
-graphic: 0.667
-mistranslation: 0.637
-instruction: 0.555
-other: 0.535
-network: 0.513
-semantic: 0.487
-vnc: 0.473
-socket: 0.447
-boot: 0.218
-KVM: 0.172
-assembly: 0.142
-
-[Qemu-devel] [BUG] vhost-user: hot-unplug vhost-user nic for windows guest OS will fail with 100% reproduce rate
-
-Hi, guys
-
-I met a problem when hot-unplug vhost-user nic for Windows 2008 rc2 sp1 64 
-(Guest OS)
-
-The xml of nic is as followed:
-<interface type='vhostuser'>
-  <mac address='52:54:00:3b:83:aa'/>
-  <source type='unix' path='/var/run/vhost-user/port1' mode='client'/>
-  <target dev='port1'/>
-  <model type='virtio'/>
-  <driver queues='4'/>
-  <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
-</interface>
-
-Firstly, I use virsh attach-device win2008 vif.xml to hot-plug a nic for Guest 
-OS. This operation returns success.
-After guest OS discover nic successfully, I use virsh detach-device win2008 
-vif.xml to hot-unplug it. This operation will fail with 100% reproduce rate.
-
-However, if I hot-plug and hot-unplug virtio-net nic , it will not fail.
-
-I have analysis the process of qmp_device_del , I found that qemu have inject 
-interrupt to acpi to let it notice guest OS to remove nic.
-I guess there is something wrong in Windows when handle the interrupt.
-
diff --git a/results/classifier/005/device/26095107 b/results/classifier/005/device/26095107
deleted file mode 100644
index f23d3275..00000000
--- a/results/classifier/005/device/26095107
+++ /dev/null
@@ -1,166 +0,0 @@
-instruction: 0.991
-assembly: 0.988
-device: 0.988
-socket: 0.987
-boot: 0.987
-KVM: 0.985
-other: 0.979
-semantic: 0.974
-vnc: 0.972
-graphic: 0.955
-mistranslation: 0.930
-network: 0.879
-
-[Qemu-devel]  [Bug Report] vm paused after succeeding to migrate
-
-Hi, all
-I encounterd a bug when I try to migrate a windows vm.
-
-Enviroment information:
-host A: cpu E5620(model WestmereEP without flag xsave)
-host B: cpu E5-2643(model SandyBridgeEP with xsave)
-
-The reproduce steps is :
-1. Start a windows 2008 vm with -cpu host(which means host-passthrough).
-2. Migrate the vm to host B when cr4.OSXSAVE=0 (successfully).
-3. Vm runs on host B for a while so that cr4.OSXSAVE changes to 1.
-4. Then migrate the vm to host A (successfully), but vm was paused, and qemu 
-printed log as followed:
-
-KVM: entry failed, hardware error 0x80000021
-
-If you're running a guest on an Intel machine without unrestricted mode
-support, the failure can be most likely due to the guest entering an invalid
-state for Intel VT. For example, the guest maybe running in big real mode
-which is not supported on less recent Intel processors.
-
-EAX=019b3bb0 EBX=01a3ae80 ECX=01a61ce8 EDX=00000000
-ESI=01a62000 EDI=00000000 EBP=00000000 ESP=01718b20
-EIP=0185d982 EFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
-ES =0000 00000000 0000ffff 00009300
-CS =f000 ffff0000 0000ffff 00009b00
-SS =0000 00000000 0000ffff 00009300
-DS =0000 00000000 0000ffff 00009300
-FS =0000 00000000 0000ffff 00009300
-GS =0000 00000000 0000ffff 00009300
-LDT=0000 00000000 0000ffff 00008200
-TR =0000 00000000 0000ffff 00008b00
-GDT=     00000000 0000ffff
-IDT=     00000000 0000ffff
-CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
-DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 
-DR3=0000000000000000
-DR6=00000000ffff0ff0 DR7=0000000000000400
-EFER=0000000000000000
-Code=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00 00 
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-
-I have found that problem happened when kvm_put_sregs returns err -22(called by 
-kvm_arch_put_registers(qemu)).
-Because kvm_arch_vcpu_ioctl_set_sregs(kvm-mod) checked that guest_cpuid_has no 
-X86_FEATURE_XSAVE but cr4.OSXSAVE=1.
-So should we cancel migration when kvm_arch_put_registers returns error?
-
-* linzhecheng (address@hidden) wrote:
->
-Hi, all
->
-I encounterd a bug when I try to migrate a windows vm.
->
->
-Enviroment information:
->
-host A: cpu E5620(model WestmereEP without flag xsave)
->
-host B: cpu E5-2643(model SandyBridgeEP with xsave)
->
->
-The reproduce steps is :
->
-1. Start a windows 2008 vm with -cpu host(which means host-passthrough).
->
-2. Migrate the vm to host B when cr4.OSXSAVE=0 (successfully).
->
-3. Vm runs on host B for a while so that cr4.OSXSAVE changes to 1.
->
-4. Then migrate the vm to host A (successfully), but vm was paused, and qemu
->
-printed log as followed:
-Remember that migrating using -cpu host  across different CPU models is NOT
-expected to work.
-
->
-KVM: entry failed, hardware error 0x80000021
->
->
-If you're running a guest on an Intel machine without unrestricted mode
->
-support, the failure can be most likely due to the guest entering an invalid
->
-state for Intel VT. For example, the guest maybe running in big real mode
->
-which is not supported on less recent Intel processors.
->
->
-EAX=019b3bb0 EBX=01a3ae80 ECX=01a61ce8 EDX=00000000
->
-ESI=01a62000 EDI=00000000 EBP=00000000 ESP=01718b20
->
-EIP=0185d982 EFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
->
-ES =0000 00000000 0000ffff 00009300
->
-CS =f000 ffff0000 0000ffff 00009b00
->
-SS =0000 00000000 0000ffff 00009300
->
-DS =0000 00000000 0000ffff 00009300
->
-FS =0000 00000000 0000ffff 00009300
->
-GS =0000 00000000 0000ffff 00009300
->
-LDT=0000 00000000 0000ffff 00008200
->
-TR =0000 00000000 0000ffff 00008b00
->
-GDT=     00000000 0000ffff
->
-IDT=     00000000 0000ffff
->
-CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
->
-DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
->
-DR3=0000000000000000
->
-DR6=00000000ffff0ff0 DR7=0000000000000400
->
-EFER=0000000000000000
->
-Code=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00
->
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
->
-00
->
->
-I have found that problem happened when kvm_put_sregs returns err -22(called
->
-by kvm_arch_put_registers(qemu)).
->
-Because kvm_arch_vcpu_ioctl_set_sregs(kvm-mod) checked that guest_cpuid_has
->
-no X86_FEATURE_XSAVE but cr4.OSXSAVE=1.
->
-So should we cancel migration when kvm_arch_put_registers returns error?
-It would seem good if we can make the migration fail there rather than
-hitting that KVM error.
-It looks like we need to do a bit of plumbing to convert the places that
-call it to return a bool rather than void.
-
-Dave
-
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
diff --git a/results/classifier/005/device/28596630 b/results/classifier/005/device/28596630
deleted file mode 100644
index 91a754e2..00000000
--- a/results/classifier/005/device/28596630
+++ /dev/null
@@ -1,121 +0,0 @@
-device: 0.835
-semantic: 0.814
-mistranslation: 0.813
-graphic: 0.785
-network: 0.780
-instruction: 0.748
-assembly: 0.725
-other: 0.707
-socket: 0.697
-vnc: 0.674
-KVM: 0.649
-boot: 0.609
-
-[Qemu-devel] [BUG] [low severity] a strange appearance of message involving slirp while doing "empty" make
-
-Folks,
-
-If qemu tree is already fully built, and "make" is attempted, for 3.1, the 
-outcome is:
-
-$ make
-        CHK version_gen.h
-$
-
-For 4.0-rc0, the outcome seems to be different:
-
-$ make
-make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
-make[1]: Nothing to be done for 'all'.
-make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
-        CHK version_gen.h
-$
-
-Not sure how significant is that, but I report it just in case.
-
-Yours,
-Aleksandar
-
-On 20/03/2019 22.08, Aleksandar Markovic wrote:
->
-Folks,
->
->
-If qemu tree is already fully built, and "make" is attempted, for 3.1, the
->
-outcome is:
->
->
-$ make
->
-CHK version_gen.h
->
-$
->
->
-For 4.0-rc0, the outcome seems to be different:
->
->
-$ make
->
-make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
->
-make[1]: Nothing to be done for 'all'.
->
-make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
->
-CHK version_gen.h
->
-$
->
->
-Not sure how significant is that, but I report it just in case.
-It's likely because slirp is currently being reworked to become a
-separate project, so the makefiles have been changed a little bit. I
-guess the message will go away again once slirp has become a stand-alone
-library.
-
- Thomas
-
-On Fri, 22 Mar 2019 at 04:59, Thomas Huth <address@hidden> wrote:
->
-On 20/03/2019 22.08, Aleksandar Markovic wrote:
->
-> $ make
->
-> make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
->
-> make[1]: Nothing to be done for 'all'.
->
-> make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
->
->       CHK version_gen.h
->
-> $
->
->
->
-> Not sure how significant is that, but I report it just in case.
->
->
-It's likely because slirp is currently being reworked to become a
->
-separate project, so the makefiles have been changed a little bit. I
->
-guess the message will go away again once slirp has become a stand-alone
->
-library.
-Well, we'll still need to ship slirp for the foreseeable future...
-
-I think the cause of this is that the rule in Makefile for
-calling the slirp Makefile is not passing it $(SUBDIR_MAKEFLAGS)
-like all the other recursive make invocations. If we do that
-then we'll suppress the entering/leaving messages for
-non-verbose builds. (Some tweaking will be needed as
-it looks like the slirp makefile has picked an incompatible
-meaning for $BUILD_DIR, which the SUBDIR_MAKEFLAGS will
-also be passing to it.)
-
-thanks
--- PMM
-
diff --git a/results/classifier/005/device/36568044 b/results/classifier/005/device/36568044
deleted file mode 100644
index ba6cad70..00000000
--- a/results/classifier/005/device/36568044
+++ /dev/null
@@ -1,4589 +0,0 @@
-mistranslation: 0.962
-device: 0.931
-graphic: 0.931
-instruction: 0.930
-other: 0.930
-assembly: 0.926
-semantic: 0.923
-KVM: 0.914
-socket: 0.907
-vnc: 0.905
-network: 0.904
-boot: 0.895
-
-[BUG, RFC] cpr-transfer: qxl guest driver crashes after migration
-
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
->
-EMULATOR=/path/to/emulator
->
-ROOTFS=/path/to/image
->
-QMPSOCK=/var/run/alma8qmp-src.sock
->
->
-$EMULATOR -enable-kvm \
->
--machine q35 \
->
--cpu host -smp 2 -m 2G \
->
--object
->
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
->
--machine memory-backend=ram0 \
->
--machine aux-ram-share=on \
->
--drive file=$ROOTFS,media=disk,if=virtio \
->
--qmp unix:$QMPSOCK,server=on,wait=off \
->
--nographic \
->
--device qxl-vga
-Run migration target:
->
-EMULATOR=/path/to/emulator
->
-ROOTFS=/path/to/image
->
-QMPSOCK=/var/run/alma8qmp-dst.sock
->
->
->
->
-$EMULATOR -enable-kvm \
->
--machine q35 \
->
--cpu host -smp 2 -m 2G \
->
--object
->
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
->
--machine memory-backend=ram0 \
->
--machine aux-ram-share=on \
->
--drive file=$ROOTFS,media=disk,if=virtio \
->
--qmp unix:$QMPSOCK,server=on,wait=off \
->
--nographic \
->
--device qxl-vga \
->
--incoming tcp:0:44444 \
->
--incoming '{"channel-type": "cpr", "addr": { "transport": "socket",
->
-"type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
->
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
->
-QMPSOCK=/var/run/alma8qmp-src.sock
->
->
-$QMPSHELL -p $QMPSOCK <<EOF
->
-migrate-set-parameters mode=cpr-transfer
->
-migrate
->
-channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
->
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
->
-[   73.962002] [TTM] Buffer eviction failed
->
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
->
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate
->
-VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which speeds up
-the crash in the guest):
->
-#!/bin/bash
->
->
-chvt 3
->
->
-for j in $(seq 80); do
->
-echo "$(date) starting round $j"
->
-if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != ""
->
-]; then
->
-echo "bug was reproduced after $j tries"
->
-exit 1
->
-fi
->
-for i in $(seq 100); do
->
-dmesg > /dev/tty3
->
-done
->
-done
->
->
-echo "bug could not be reproduced"
->
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into this?  Any
-suggestions would be appreciated.  Thanks!
-
-Andrey
-
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-     -machine q35 \
-     -cpu host -smp 2 -m 2G \
-     -object 
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
-     -machine memory-backend=ram0 \
-     -machine aux-ram-share=on \
-     -drive file=$ROOTFS,media=disk,if=virtio \
-     -qmp unix:$QMPSOCK,server=on,wait=off \
-     -nographic \
-     -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
--machine q35 \
-     -cpu host -smp 2 -m 2G \
-     -object 
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
-     -machine memory-backend=ram0 \
-     -machine aux-ram-share=on \
-     -drive file=$ROOTFS,media=disk,if=virtio \
-     -qmp unix:$QMPSOCK,server=on,wait=off \
-     -nographic \
-     -device qxl-vga \
-     -incoming tcp:0:44444 \
-     -incoming '{"channel-type": "cpr", "addr": { "transport": "socket", "type": "unix", 
-"path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-     migrate-set-parameters mode=cpr-transfer
-     migrate 
-channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate 
-VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-         echo "$(date) starting round $j"
-         if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != "" 
-]; then
-                 echo "bug was reproduced after $j tries"
-                 exit 1
-         fi
-         for i in $(seq 100); do
-                 dmesg > /dev/tty3
-         done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-
-- Steve
-
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-     -machine q35 \
-     -cpu host -smp 2 -m 2G \
-     -object 
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
-     -machine memory-backend=ram0 \
-     -machine aux-ram-share=on \
-     -drive file=$ROOTFS,media=disk,if=virtio \
-     -qmp unix:$QMPSOCK,server=on,wait=off \
-     -nographic \
-     -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-     -machine q35 \
-     -cpu host -smp 2 -m 2G \
-     -object 
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
-     -machine memory-backend=ram0 \
-     -machine aux-ram-share=on \
-     -drive file=$ROOTFS,media=disk,if=virtio \
-     -qmp unix:$QMPSOCK,server=on,wait=off \
-     -nographic \
-     -device qxl-vga \
-     -incoming tcp:0:44444 \
-     -incoming '{"channel-type": "cpr", "addr": { "transport": "socket", "type": "unix", 
-"path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-     migrate-set-parameters mode=cpr-transfer
-     migrate 
-channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate 
-VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-         echo "$(date) starting round $j"
-         if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != "" 
-]; then
-                 echo "bug was reproduced after $j tries"
-                 exit 1
-         fi
-         for i in $(seq 100); do
-                 dmesg > /dev/tty3
-         done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-1740667681-257312-1-git-send-email-steven.sistare@oracle.com
-/">https://lore.kernel.org/qemu-devel/
-1740667681-257312-1-git-send-email-steven.sistare@oracle.com
-/
-- Steve
-
-On 2/28/25 8:20 PM, Steven Sistare wrote:
->
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
->
-> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
->
->> Hi all,
->
->>
->
->> We've been experimenting with cpr-transfer migration mode recently and
->
->> have discovered the following issue with the guest QXL driver:
->
->>
->
->> Run migration source:
->
->>> EMULATOR=/path/to/emulator
->
->>> ROOTFS=/path/to/image
->
->>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>
->
->>> $EMULATOR -enable-kvm \
->
->>>      -machine q35 \
->
->>>      -cpu host -smp 2 -m 2G \
->
->>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>> ram0,share=on\
->
->>>      -machine memory-backend=ram0 \
->
->>>      -machine aux-ram-share=on \
->
->>>      -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>      -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>      -nographic \
->
->>>      -device qxl-vga
->
->>
->
->> Run migration target:
->
->>> EMULATOR=/path/to/emulator
->
->>> ROOTFS=/path/to/image
->
->>> QMPSOCK=/var/run/alma8qmp-dst.sock
->
->>> $EMULATOR -enable-kvm \
->
->>>      -machine q35 \
->
->>>      -cpu host -smp 2 -m 2G \
->
->>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>> ram0,share=on\
->
->>>      -machine memory-backend=ram0 \
->
->>>      -machine aux-ram-share=on \
->
->>>      -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>      -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>      -nographic \
->
->>>      -device qxl-vga \
->
->>>      -incoming tcp:0:44444 \
->
->>>      -incoming '{"channel-type": "cpr", "addr": { "transport":
->
->>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
->
->>
->
->>
->
->> Launch the migration:
->
->>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
->
->>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>
->
->>> $QMPSHELL -p $QMPSOCK <<EOF
->
->>>      migrate-set-parameters mode=cpr-transfer
->
->>>      migrate channels=[{"channel-type":"main","addr":
->
->>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
->
->>> {"channel-type":"cpr","addr":
->
->>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
->
->>> dst.sock"}}]
->
->>> EOF
->
->>
->
->> Then, after a while, QXL guest driver on target crashes spewing the
->
->> following messages:
->
->>> [   73.962002] [TTM] Buffer eviction failed
->
->>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
->
->>> 0x00000001)
->
->>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
->
->>> allocate VRAM BO
->
->>
->
->> That seems to be a known kernel QXL driver bug:
->
->>
->
->>
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
->
->>
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
->
->>
->
->> (the latter discussion contains that reproduce script which speeds up
->
->> the crash in the guest):
->
->>> #!/bin/bash
->
->>>
->
->>> chvt 3
->
->>>
->
->>> for j in $(seq 80); do
->
->>>          echo "$(date) starting round $j"
->
->>>          if [ "$(journalctl --boot | grep "failed to allocate VRAM
->
->>> BO")" != "" ]; then
->
->>>                  echo "bug was reproduced after $j tries"
->
->>>                  exit 1
->
->>>          fi
->
->>>          for i in $(seq 100); do
->
->>>                  dmesg > /dev/tty3
->
->>>          done
->
->>> done
->
->>>
->
->>> echo "bug could not be reproduced"
->
->>> exit 0
->
->>
->
->> The bug itself seems to remain unfixed, as I was able to reproduce that
->
->> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
->
->> cpr-transfer code also seems to be buggy as it triggers the crash -
->
->> without the cpr-transfer migration the above reproduce doesn't lead to
->
->> crash on the source VM.
->
->>
->
->> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
->
->> rather passes it through the memory backend object, our code might
->
->> somehow corrupt the VRAM.  However, I wasn't able to trace the
->
->> corruption so far.
->
->>
->
->> Could somebody help the investigation and take a look into this?  Any
->
->> suggestions would be appreciated.  Thanks!
->
->
->
-> Possibly some memory region created by qxl is not being preserved.
->
-> Try adding these traces to see what is preserved:
->
->
->
-> -trace enable='*cpr*'
->
-> -trace enable='*ram_alloc*'
->
->
-Also try adding this patch to see if it flags any ram blocks as not
->
-compatible with cpr.  A message is printed at migration start time.
->
-Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
->
-steven.sistare@oracle.com/
->
->
-- Steve
->
-With the traces enabled + the "migration: ram block cpr blockers" patch
-applied:
-
-Source:
->
-cpr_find_fd pc.bios, id 0 returns -1
->
-cpr_save_fd pc.bios, id 0, fd 22
->
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
->
-0x7fec18e00000
->
-cpr_find_fd pc.rom, id 0 returns -1
->
-cpr_save_fd pc.rom, id 0, fd 23
->
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
->
-0x7fec18c00000
->
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
->
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
->
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
->
-24 host 0x7fec18a00000
->
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
->
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
->
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
->
-fd 25 host 0x7feb77e00000
->
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
->
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27
->
-host 0x7fec18800000
->
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
->
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
->
-fd 28 host 0x7feb73c00000
->
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
->
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34
->
-host 0x7fec18600000
->
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
->
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
->
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 35
->
-host 0x7fec18200000
->
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
->
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
->
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36
->
-host 0x7feb8b600000
->
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
->
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
->
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host
->
-0x7feb8b400000
->
->
-cpr_state_save cpr-transfer mode
->
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
->
-cpr_transfer_input /var/run/alma8cpr-dst.sock
->
-cpr_state_load cpr-transfer mode
->
-cpr_find_fd pc.bios, id 0 returns 20
->
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
->
-0x7fcdc9800000
->
-cpr_find_fd pc.rom, id 0 returns 19
->
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
->
-0x7fcdc9600000
->
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
->
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
->
-18 host 0x7fcdc9400000
->
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
->
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
->
-fd 17 host 0x7fcd27e00000
->
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16
->
-host 0x7fcdc9200000
->
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
->
-fd 15 host 0x7fcd23c00000
->
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
->
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14
->
-host 0x7fcdc8800000
->
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
->
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 13
->
-host 0x7fcdc8400000
->
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
->
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11
->
-host 0x7fcdc8200000
->
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
->
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host
->
-0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the same
-addresses), and no incompatible ram blocks are found during migration.
-
-Andrey
-
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
->
-On 2/28/25 8:20 PM, Steven Sistare wrote:
->
-> On 2/28/2025 1:13 PM, Steven Sistare wrote:
->
->> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
->
->>> Hi all,
->
->>>
->
->>> We've been experimenting with cpr-transfer migration mode recently and
->
->>> have discovered the following issue with the guest QXL driver:
->
->>>
->
->>> Run migration source:
->
->>>> EMULATOR=/path/to/emulator
->
->>>> ROOTFS=/path/to/image
->
->>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>
->
->>>> $EMULATOR -enable-kvm \
->
->>>>      -machine q35 \
->
->>>>      -cpu host -smp 2 -m 2G \
->
->>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>>> ram0,share=on\
->
->>>>      -machine memory-backend=ram0 \
->
->>>>      -machine aux-ram-share=on \
->
->>>>      -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>      -nographic \
->
->>>>      -device qxl-vga
->
->>>
->
->>> Run migration target:
->
->>>> EMULATOR=/path/to/emulator
->
->>>> ROOTFS=/path/to/image
->
->>>> QMPSOCK=/var/run/alma8qmp-dst.sock
->
->>>> $EMULATOR -enable-kvm \
->
->>>>      -machine q35 \
->
->>>>      -cpu host -smp 2 -m 2G \
->
->>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>>> ram0,share=on\
->
->>>>      -machine memory-backend=ram0 \
->
->>>>      -machine aux-ram-share=on \
->
->>>>      -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>      -nographic \
->
->>>>      -device qxl-vga \
->
->>>>      -incoming tcp:0:44444 \
->
->>>>      -incoming '{"channel-type": "cpr", "addr": { "transport":
->
->>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
->
->>>
->
->>>
->
->>> Launch the migration:
->
->>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
->
->>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>
->
->>>> $QMPSHELL -p $QMPSOCK <<EOF
->
->>>>      migrate-set-parameters mode=cpr-transfer
->
->>>>      migrate channels=[{"channel-type":"main","addr":
->
->>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
->
->>>> {"channel-type":"cpr","addr":
->
->>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
->
->>>> dst.sock"}}]
->
->>>> EOF
->
->>>
->
->>> Then, after a while, QXL guest driver on target crashes spewing the
->
->>> following messages:
->
->>>> [   73.962002] [TTM] Buffer eviction failed
->
->>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
->
->>>> 0x00000001)
->
->>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
->
->>>> allocate VRAM BO
->
->>>
->
->>> That seems to be a known kernel QXL driver bug:
->
->>>
->
->>>
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
->
->>>
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
->
->>>
->
->>> (the latter discussion contains that reproduce script which speeds up
->
->>> the crash in the guest):
->
->>>> #!/bin/bash
->
->>>>
->
->>>> chvt 3
->
->>>>
->
->>>> for j in $(seq 80); do
->
->>>>          echo "$(date) starting round $j"
->
->>>>          if [ "$(journalctl --boot | grep "failed to allocate VRAM
->
->>>> BO")" != "" ]; then
->
->>>>                  echo "bug was reproduced after $j tries"
->
->>>>                  exit 1
->
->>>>          fi
->
->>>>          for i in $(seq 100); do
->
->>>>                  dmesg > /dev/tty3
->
->>>>          done
->
->>>> done
->
->>>>
->
->>>> echo "bug could not be reproduced"
->
->>>> exit 0
->
->>>
->
->>> The bug itself seems to remain unfixed, as I was able to reproduce that
->
->>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
->
->>> cpr-transfer code also seems to be buggy as it triggers the crash -
->
->>> without the cpr-transfer migration the above reproduce doesn't lead to
->
->>> crash on the source VM.
->
->>>
->
->>> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
->
->>> rather passes it through the memory backend object, our code might
->
->>> somehow corrupt the VRAM.  However, I wasn't able to trace the
->
->>> corruption so far.
->
->>>
->
->>> Could somebody help the investigation and take a look into this?  Any
->
->>> suggestions would be appreciated.  Thanks!
->
->>
->
->> Possibly some memory region created by qxl is not being preserved.
->
->> Try adding these traces to see what is preserved:
->
->>
->
->> -trace enable='*cpr*'
->
->> -trace enable='*ram_alloc*'
->
->
->
-> Also try adding this patch to see if it flags any ram blocks as not
->
-> compatible with cpr.  A message is printed at migration start time.
->
-> Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
->
-> steven.sistare@oracle.com/
->
->
->
-> - Steve
->
->
->
->
-With the traces enabled + the "migration: ram block cpr blockers" patch
->
-applied:
->
->
-Source:
->
-> cpr_find_fd pc.bios, id 0 returns -1
->
-> cpr_save_fd pc.bios, id 0, fd 22
->
-> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
->
-> 0x7fec18e00000
->
-> cpr_find_fd pc.rom, id 0 returns -1
->
-> cpr_save_fd pc.rom, id 0, fd 23
->
-> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
->
-> 0x7fec18c00000
->
-> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
->
-> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
->
-> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
->
-> 24 host 0x7fec18a00000
->
-> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
->
-> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
->
-> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
->
-> fd 25 host 0x7feb77e00000
->
-> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
->
-> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27
->
-> host 0x7fec18800000
->
-> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
->
-> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
->
-> fd 28 host 0x7feb73c00000
->
-> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
->
-> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34
->
-> host 0x7fec18600000
->
-> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
->
-> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
->
-> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd
->
-> 35 host 0x7fec18200000
->
-> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
->
-> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
->
-> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36
->
-> host 0x7feb8b600000
->
-> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
->
-> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
->
-> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host
->
-> 0x7feb8b400000
->
->
->
-> cpr_state_save cpr-transfer mode
->
-> cpr_transfer_output /var/run/alma8cpr-dst.sock
->
->
-Target:
->
-> cpr_transfer_input /var/run/alma8cpr-dst.sock
->
-> cpr_state_load cpr-transfer mode
->
-> cpr_find_fd pc.bios, id 0 returns 20
->
-> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
->
-> 0x7fcdc9800000
->
-> cpr_find_fd pc.rom, id 0 returns 19
->
-> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
->
-> 0x7fcdc9600000
->
-> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
->
-> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
->
-> 18 host 0x7fcdc9400000
->
-> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
->
-> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
->
-> fd 17 host 0x7fcd27e00000
->
-> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16
->
-> host 0x7fcdc9200000
->
-> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
->
-> fd 15 host 0x7fcd23c00000
->
-> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
->
-> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14
->
-> host 0x7fcdc8800000
->
-> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
->
-> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd
->
-> 13 host 0x7fcdc8400000
->
-> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
->
-> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11
->
-> host 0x7fcdc8200000
->
-> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
->
-> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host
->
-> 0x7fcd3be00000
->
->
-Looks like both vga.vram and qxl.vram are being preserved (with the same
->
-addresses), and no incompatible ram blocks are found during migration.
->
-Sorry, addressed are not the same, of course.  However corresponding ram
-blocks do seem to be preserved and initialized.
-
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-      -machine q35 \
-      -cpu host -smp 2 -m 2G \
-      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-      -machine memory-backend=ram0 \
-      -machine aux-ram-share=on \
-      -drive file=$ROOTFS,media=disk,if=virtio \
-      -qmp unix:$QMPSOCK,server=on,wait=off \
-      -nographic \
-      -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-      -machine q35 \
-      -cpu host -smp 2 -m 2G \
-      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-      -machine memory-backend=ram0 \
-      -machine aux-ram-share=on \
-      -drive file=$ROOTFS,media=disk,if=virtio \
-      -qmp unix:$QMPSOCK,server=on,wait=off \
-      -nographic \
-      -device qxl-vga \
-      -incoming tcp:0:44444 \
-      -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-      migrate-set-parameters mode=cpr-transfer
-      migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-          echo "$(date) starting round $j"
-          if [ "$(journalctl --boot | grep "failed to allocate VRAM
-BO")" != "" ]; then
-                  echo "bug was reproduced after $j tries"
-                  exit 1
-          fi
-          for i in $(seq 100); do
-                  dmesg > /dev/tty3
-          done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
- Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers" patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host 
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host 
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd 24 
-host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864 fd 
-25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27 host 
-0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864 fd 
-28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34 host 
-0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 35 
-host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36 host 
-0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host 
-0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host 
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host 
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd 18 
-host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864 fd 
-17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16 host 
-0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864 fd 
-15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14 host 
-0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 13 
-host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11 host 
-0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host 
-0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the same
-addresses), and no incompatible ram blocks are found during migration.
-Sorry, addressed are not the same, of course.  However corresponding ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-  qemu_ram_alloc_internal()
-    if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-        ram_flags |= RAM_READONLY;
-    new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-0001-hw-qxl-cpr-support-preliminary.patch
-Description:
-Text document
-
-On 3/4/25 9:05 PM, Steven Sistare wrote:
->
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
->
-> On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
->
->> On 2/28/25 8:20 PM, Steven Sistare wrote:
->
->>> On 2/28/2025 1:13 PM, Steven Sistare wrote:
->
->>>> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
->
->>>>> Hi all,
->
->>>>>
->
->>>>> We've been experimenting with cpr-transfer migration mode recently
->
->>>>> and
->
->>>>> have discovered the following issue with the guest QXL driver:
->
->>>>>
->
->>>>> Run migration source:
->
->>>>>> EMULATOR=/path/to/emulator
->
->>>>>> ROOTFS=/path/to/image
->
->>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>>>
->
->>>>>> $EMULATOR -enable-kvm \
->
->>>>>>       -machine q35 \
->
->>>>>>       -cpu host -smp 2 -m 2G \
->
->>>>>>       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>>>>> ram0,share=on\
->
->>>>>>       -machine memory-backend=ram0 \
->
->>>>>>       -machine aux-ram-share=on \
->
->>>>>>       -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>>>       -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>>>       -nographic \
->
->>>>>>       -device qxl-vga
->
->>>>>
->
->>>>> Run migration target:
->
->>>>>> EMULATOR=/path/to/emulator
->
->>>>>> ROOTFS=/path/to/image
->
->>>>>> QMPSOCK=/var/run/alma8qmp-dst.sock
->
->>>>>> $EMULATOR -enable-kvm \
->
->>>>>>       -machine q35 \
->
->>>>>>       -cpu host -smp 2 -m 2G \
->
->>>>>>       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
->
->>>>>> ram0,share=on\
->
->>>>>>       -machine memory-backend=ram0 \
->
->>>>>>       -machine aux-ram-share=on \
->
->>>>>>       -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>>>       -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>>>       -nographic \
->
->>>>>>       -device qxl-vga \
->
->>>>>>       -incoming tcp:0:44444 \
->
->>>>>>       -incoming '{"channel-type": "cpr", "addr": { "transport":
->
->>>>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
->
->>>>>
->
->>>>>
->
->>>>> Launch the migration:
->
->>>>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
->
->>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>>>
->
->>>>>> $QMPSHELL -p $QMPSOCK <<EOF
->
->>>>>>       migrate-set-parameters mode=cpr-transfer
->
->>>>>>       migrate channels=[{"channel-type":"main","addr":
->
->>>>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
->
->>>>>> {"channel-type":"cpr","addr":
->
->>>>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
->
->>>>>> dst.sock"}}]
->
->>>>>> EOF
->
->>>>>
->
->>>>> Then, after a while, QXL guest driver on target crashes spewing the
->
->>>>> following messages:
->
->>>>>> [   73.962002] [TTM] Buffer eviction failed
->
->>>>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
->
->>>>>> 0x00000001)
->
->>>>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
->
->>>>>> allocate VRAM BO
->
->>>>>
->
->>>>> That seems to be a known kernel QXL driver bug:
->
->>>>>
->
->>>>>
-https://lore.kernel.org/all/20220907094423.93581-1-
->
->>>>> min_halo@163.com/T/
->
->>>>>
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
->
->>>>>
->
->>>>> (the latter discussion contains that reproduce script which speeds up
->
->>>>> the crash in the guest):
->
->>>>>> #!/bin/bash
->
->>>>>>
->
->>>>>> chvt 3
->
->>>>>>
->
->>>>>> for j in $(seq 80); do
->
->>>>>>           echo "$(date) starting round $j"
->
->>>>>>           if [ "$(journalctl --boot | grep "failed to allocate VRAM
->
->>>>>> BO")" != "" ]; then
->
->>>>>>                   echo "bug was reproduced after $j tries"
->
->>>>>>                   exit 1
->
->>>>>>           fi
->
->>>>>>           for i in $(seq 100); do
->
->>>>>>                   dmesg > /dev/tty3
->
->>>>>>           done
->
->>>>>> done
->
->>>>>>
->
->>>>>> echo "bug could not be reproduced"
->
->>>>>> exit 0
->
->>>>>
->
->>>>> The bug itself seems to remain unfixed, as I was able to reproduce
->
->>>>> that
->
->>>>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
->
->>>>> cpr-transfer code also seems to be buggy as it triggers the crash -
->
->>>>> without the cpr-transfer migration the above reproduce doesn't
->
->>>>> lead to
->
->>>>> crash on the source VM.
->
->>>>>
->
->>>>> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
->
->>>>> rather passes it through the memory backend object, our code might
->
->>>>> somehow corrupt the VRAM.  However, I wasn't able to trace the
->
->>>>> corruption so far.
->
->>>>>
->
->>>>> Could somebody help the investigation and take a look into this?  Any
->
->>>>> suggestions would be appreciated.  Thanks!
->
->>>>
->
->>>> Possibly some memory region created by qxl is not being preserved.
->
->>>> Try adding these traces to see what is preserved:
->
->>>>
->
->>>> -trace enable='*cpr*'
->
->>>> -trace enable='*ram_alloc*'
->
->>>
->
->>> Also try adding this patch to see if it flags any ram blocks as not
->
->>> compatible with cpr.  A message is printed at migration start time.
->
->>>  Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
->
->>> email-
->
->>> steven.sistare@oracle.com/
->
->>>
->
->>> - Steve
->
->>>
->
->>
->
->> With the traces enabled + the "migration: ram block cpr blockers" patch
->
->> applied:
->
->>
->
->> Source:
->
->>> cpr_find_fd pc.bios, id 0 returns -1
->
->>> cpr_save_fd pc.bios, id 0, fd 22
->
->>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
->
->>> 0x7fec18e00000
->
->>> cpr_find_fd pc.rom, id 0 returns -1
->
->>> cpr_save_fd pc.rom, id 0, fd 23
->
->>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
->
->>> 0x7fec18c00000
->
->>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
->
->>> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
->
->>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
->
->>> 262144 fd 24 host 0x7fec18a00000
->
->>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
->
->>> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
->
->>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
->
->>> 67108864 fd 25 host 0x7feb77e00000
->
->>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
->
->>> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
->
->>> fd 27 host 0x7fec18800000
->
->>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
->
->>> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
->
->>> 67108864 fd 28 host 0x7feb73c00000
->
->>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
->
->>> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
->
->>> fd 34 host 0x7fec18600000
->
->>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
->
->>> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
->
->>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
->
->>> 2097152 fd 35 host 0x7fec18200000
->
->>> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
->
->>> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
->
->>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
->
->>> fd 36 host 0x7feb8b600000
->
->>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
->
->>> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
->
->>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
->
->>> 37 host 0x7feb8b400000
->
->>>
->
->>> cpr_state_save cpr-transfer mode
->
->>> cpr_transfer_output /var/run/alma8cpr-dst.sock
->
->>
->
->> Target:
->
->>> cpr_transfer_input /var/run/alma8cpr-dst.sock
->
->>> cpr_state_load cpr-transfer mode
->
->>> cpr_find_fd pc.bios, id 0 returns 20
->
->>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
->
->>> 0x7fcdc9800000
->
->>> cpr_find_fd pc.rom, id 0 returns 19
->
->>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
->
->>> 0x7fcdc9600000
->
->>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
->
->>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
->
->>> 262144 fd 18 host 0x7fcdc9400000
->
->>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
->
->>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
->
->>> 67108864 fd 17 host 0x7fcd27e00000
->
->>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
->
->>> fd 16 host 0x7fcdc9200000
->
->>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
->
->>> 67108864 fd 15 host 0x7fcd23c00000
->
->>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
->
->>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
->
->>> fd 14 host 0x7fcdc8800000
->
->>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
->
->>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
->
->>> 2097152 fd 13 host 0x7fcdc8400000
->
->>> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
->
->>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
->
->>> fd 11 host 0x7fcdc8200000
->
->>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
->
->>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
->
->>> 10 host 0x7fcd3be00000
->
->>
->
->> Looks like both vga.vram and qxl.vram are being preserved (with the same
->
->> addresses), and no incompatible ram blocks are found during migration.
->
->
->
-> Sorry, addressed are not the same, of course.  However corresponding ram
->
-> blocks do seem to be preserved and initialized.
->
->
-So far, I have not reproduced the guest driver failure.
->
->
-However, I have isolated places where new QEMU improperly writes to
->
-the qxl memory regions prior to starting the guest, by mmap'ing them
->
-readonly after cpr:
->
->
-  qemu_ram_alloc_internal()
->
-    if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
->
-        ram_flags |= RAM_READONLY;
->
-    new_block = qemu_ram_alloc_from_fd(...)
->
->
-I have attached a draft fix; try it and let me know.
->
-My console window looks fine before and after cpr, using
->
--vnc $hostip:0 -vga qxl
->
->
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?  Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-
->
-Program terminated with signal SIGSEGV, Segmentation fault.
->
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
->
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
->
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
->
-(gdb) bt
->
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
->
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
->
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
->
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
->
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
->
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
->
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
->
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
->
-value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
->
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
->
-v=0x5638996f3770, name=0x56389759b141 "realized", opaque=0x5638987893d0,
->
-errp=0x7ffd3c2b84e0)
->
-at ../qom/object.c:2374
->
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
->
-name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
->
-at ../qom/object.c:1449
->
-#7  0x00005638970f8586 in object_property_set_qobject (obj=0x5638996e0e70,
->
-name=0x56389759b141 "realized", value=0x5638996df900, errp=0x7ffd3c2b84e0)
->
-at ../qom/qom-qobject.c:28
->
-#8  0x00005638970f3d8d in object_property_set_bool (obj=0x5638996e0e70,
->
-name=0x56389759b141 "realized", value=true, errp=0x7ffd3c2b84e0)
->
-at ../qom/object.c:1519
->
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
->
-bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
->
-#10 0x0000563896dba675 in qdev_device_add_from_qdict (opts=0x5638996dfe50,
->
-from_json=false, errp=0x7ffd3c2b84e0) at ../system/qdev-monitor.c:714
->
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
->
-errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
->
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0, opts=0x563898786150,
->
-errp=0x56389855dc40 <error_fatal>) at ../system/vl.c:1207
->
-#13 0x000056389737a6cc in qemu_opts_foreach
->
-(list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
->
-<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
->
-at ../util/qemu-option.c:1135
->
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/vl.c:2745
->
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
->
-<error_fatal>) at ../system/vl.c:2806
->
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948) at
->
-../system/vl.c:3838
->
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at
->
-../system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-
-Andrey
-0001-hw-qxl-cpr-support-preliminary.patch
-Description:
-Text Data
-
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
-On 3/4/25 9:05 PM, Steven Sistare wrote:
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently
-and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-       -machine q35 \
-       -cpu host -smp 2 -m 2G \
-       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-       -machine memory-backend=ram0 \
-       -machine aux-ram-share=on \
-       -drive file=$ROOTFS,media=disk,if=virtio \
-       -qmp unix:$QMPSOCK,server=on,wait=off \
-       -nographic \
-       -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-       -machine q35 \
-       -cpu host -smp 2 -m 2G \
-       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-       -machine memory-backend=ram0 \
-       -machine aux-ram-share=on \
-       -drive file=$ROOTFS,media=disk,if=virtio \
-       -qmp unix:$QMPSOCK,server=on,wait=off \
-       -nographic \
-       -device qxl-vga \
-       -incoming tcp:0:44444 \
-       -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-       migrate-set-parameters mode=cpr-transfer
-       migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-
-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-           echo "$(date) starting round $j"
-           if [ "$(journalctl --boot | grep "failed to allocate VRAM
-BO")" != "" ]; then
-                   echo "bug was reproduced after $j tries"
-                   exit 1
-           fi
-           for i in $(seq 100); do
-                   dmesg > /dev/tty3
-           done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce
-that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't
-lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-  Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers" patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 24 host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 27 host 0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 34 host 0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 35 host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 36 host 0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-37 host 0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 18 host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 16 host 0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 14 host 0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 13 host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 11 host 0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-10 host 0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the same
-addresses), and no incompatible ram blocks are found during migration.
-Sorry, addressed are not the same, of course.  However corresponding ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-   qemu_ram_alloc_internal()
-     if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-         ram_flags |= RAM_READONLY;
-     new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?
-cpr does not preserve the vnc connection and session.  To test, I specify
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
-dormant the dest vnc becomes active.
-Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-I have been running like that, but have not reproduced the qxl driver crash,
-and I suspect my guest image+kernel is too old.  However, once I realized the
-issue was post-cpr modification of qxl memory, I switched my attention to the
-fix.
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
-(gdb) bt
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70, 
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70, 
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70, 
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70, value=true, 
-errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70, v=0x5638996f3770, 
-name=0x56389759b141 "realized", opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:2374
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70, name=0x56389759b141 
-"realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:1449
-#7  0x00005638970f8586 in object_property_set_qobject (obj=0x5638996e0e70, 
-name=0x56389759b141 "realized", value=0x5638996df900, errp=0x7ffd3c2b84e0)
-     at ../qom/qom-qobject.c:28
-#8  0x00005638970f3d8d in object_property_set_bool (obj=0x5638996e0e70, 
-name=0x56389759b141 "realized", value=true, errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:1519
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70, bus=0x563898cf3c20, 
-errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
-#10 0x0000563896dba675 in qdev_device_add_from_qdict (opts=0x5638996dfe50, 
-from_json=false, errp=0x7ffd3c2b84e0) at ../system/qdev-monitor.c:714
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150, errp=0x56389855dc40 
-<error_fatal>) at ../system/qdev-monitor.c:733
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0, opts=0x563898786150, 
-errp=0x56389855dc40 <error_fatal>) at ../system/vl.c:1207
-#13 0x000056389737a6cc in qemu_opts_foreach
-     (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca <device_init_func>, 
-opaque=0x0, errp=0x56389855dc40 <error_fatal>)
-     at ../util/qemu-option.c:1135
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/vl.c:2745
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40 
-<error_fatal>) at ../system/vl.c:2806
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948) at 
-../system/vl.c:3838
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at 
-../system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram are
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
-of init_qxl_ram that modify guest memory.
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-It's a useful debugging technique, but changing protection on a large memory 
-region
-can be too expensive for production due to TLB shootdowns.
-
-Also, there are cases where writes are performed but the value is guaranteed to
-be the same:
-  qxl_post_load()
-    qxl_set_mode()
-      d->rom->mode = cpu_to_le32(modenr);
-The value is the same because mode and shadow_rom.mode were passed in vmstate
-from old qemu.
-
-- Steve
-0001-hw-qxl-cpr-support-preliminary-V2.patch
-Description:
-Text document
-
-On 3/5/25 22:19, Steven Sistare wrote:
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
-On 3/4/25 9:05 PM, Steven Sistare wrote:
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently
-and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-       -machine q35 \
-       -cpu host -smp 2 -m 2G \
-       -object
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-       -machine memory-backend=ram0 \
-       -machine aux-ram-share=on \
-       -drive file=$ROOTFS,media=disk,if=virtio \
-       -qmp unix:$QMPSOCK,server=on,wait=off \
-       -nographic \
-       -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-       -machine q35 \
-       -cpu host -smp 2 -m 2G \
-       -object
-memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
-ram0,share=on\
-       -machine memory-backend=ram0 \
-       -machine aux-ram-share=on \
-       -drive file=$ROOTFS,media=disk,if=virtio \
-       -qmp unix:$QMPSOCK,server=on,wait=off \
-       -nographic \
-       -device qxl-vga \
-       -incoming tcp:0:44444 \
-       -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-       migrate-set-parameters mode=cpr-transfer
-       migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing
-the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR*
-failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-
-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which
-speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-           echo "$(date) starting round $j"
-           if [ "$(journalctl --boot | grep "failed to
-allocate VRAM
-BO")" != "" ]; then
-                   echo "bug was reproduced after $j tries"
-                   exit 1
-           fi
-           for i in $(seq 100); do
-                   dmesg > /dev/tty3
-           done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce
-that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the
-crash -
-without the cpr-transfer migration the above reproduce doesn't
-lead to
-crash on the source VM.
-I suspect that, as cpr-transfer doesn't migrate the guest
-memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-Could somebody help the investigation and take a look into
-this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers"
-patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 24 host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 27 host 0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 34 host 0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 35 host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 36 host 0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-37 host 0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 18 host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 16 host 0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 14 host 0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 13 host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 11 host 0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-10 host 0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with
-the same
-addresses), and no incompatible ram blocks are found during
-migration.
-Sorry, addressed are not the same, of course.  However
-corresponding ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-   qemu_ram_alloc_internal()
-     if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-         ram_flags |= RAM_READONLY;
-     new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?
-cpr does not preserve the vnc connection and session.  To test, I specify
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
-dormant the dest vnc becomes active.
-Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-I have been running like that, but have not reproduced the qxl driver
-crash,
-and I suspect my guest image+kernel is too old.  However, once I
-realized the
-issue was post-cpr modification of qxl memory, I switched my attention
-to the
-fix.
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
-(gdb) bt
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
-value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
-v=0x5638996f3770, name=0x56389759b141 "realized",
-opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:2374
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
-name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:1449
-#7  0x00005638970f8586 in object_property_set_qobject
-(obj=0x5638996e0e70, name=0x56389759b141 "realized",
-value=0x5638996df900, errp=0x7ffd3c2b84e0)
-     at ../qom/qom-qobject.c:28
-#8  0x00005638970f3d8d in object_property_set_bool
-(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
-errp=0x7ffd3c2b84e0)
-     at ../qom/object.c:1519
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
-bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
-#10 0x0000563896dba675 in qdev_device_add_from_qdict
-(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at
-../system/qdev-monitor.c:714
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
-errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
-opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at
-../system/vl.c:1207
-#13 0x000056389737a6cc in qemu_opts_foreach
-     (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
-<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
-     at ../util/qemu-option.c:1135
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at
-../system/vl.c:2745
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
-<error_fatal>) at ../system/vl.c:2806
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
-at ../system/vl.c:3838
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at
-../system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-Thanks for the stack trace; the calls to SPICE_RING_INIT in
-init_qxl_ram are
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
-of init_qxl_ram that modify guest memory.
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-It's a useful debugging technique, but changing protection on a large
-memory region
-can be too expensive for production due to TLB shootdowns.
-Good point. Though we could move this code under non-default option to
-avoid re-writing.
-
-Den
-
-On 3/5/25 11:19 PM, Steven Sistare wrote:
->
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
->
-> On 3/4/25 9:05 PM, Steven Sistare wrote:
->
->> On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
->
->>> On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
->
->>>> On 2/28/25 8:20 PM, Steven Sistare wrote:
->
->>>>> On 2/28/2025 1:13 PM, Steven Sistare wrote:
->
->>>>>> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
->
->>>>>>> Hi all,
->
->>>>>>>
->
->>>>>>> We've been experimenting with cpr-transfer migration mode recently
->
->>>>>>> and
->
->>>>>>> have discovered the following issue with the guest QXL driver:
->
->>>>>>>
->
->>>>>>> Run migration source:
->
->>>>>>>> EMULATOR=/path/to/emulator
->
->>>>>>>> ROOTFS=/path/to/image
->
->>>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>>>>>
->
->>>>>>>> $EMULATOR -enable-kvm \
->
->>>>>>>>        -machine q35 \
->
->>>>>>>>        -cpu host -smp 2 -m 2G \
->
->>>>>>>>        -object memory-backend-file,id=ram0,size=2G,mem-path=/
->
->>>>>>>> dev/shm/
->
->>>>>>>> ram0,share=on\
->
->>>>>>>>        -machine memory-backend=ram0 \
->
->>>>>>>>        -machine aux-ram-share=on \
->
->>>>>>>>        -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>>>>>        -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>>>>>        -nographic \
->
->>>>>>>>        -device qxl-vga
->
->>>>>>>
->
->>>>>>> Run migration target:
->
->>>>>>>> EMULATOR=/path/to/emulator
->
->>>>>>>> ROOTFS=/path/to/image
->
->>>>>>>> QMPSOCK=/var/run/alma8qmp-dst.sock
->
->>>>>>>> $EMULATOR -enable-kvm \
->
->>>>>>>>        -machine q35 \
->
->>>>>>>>        -cpu host -smp 2 -m 2G \
->
->>>>>>>>        -object memory-backend-file,id=ram0,size=2G,mem-path=/
->
->>>>>>>> dev/shm/
->
->>>>>>>> ram0,share=on\
->
->>>>>>>>        -machine memory-backend=ram0 \
->
->>>>>>>>        -machine aux-ram-share=on \
->
->>>>>>>>        -drive file=$ROOTFS,media=disk,if=virtio \
->
->>>>>>>>        -qmp unix:$QMPSOCK,server=on,wait=off \
->
->>>>>>>>        -nographic \
->
->>>>>>>>        -device qxl-vga \
->
->>>>>>>>        -incoming tcp:0:44444 \
->
->>>>>>>>        -incoming '{"channel-type": "cpr", "addr": { "transport":
->
->>>>>>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
->
->>>>>>>
->
->>>>>>>
->
->>>>>>> Launch the migration:
->
->>>>>>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
->
->>>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
->
->>>>>>>>
->
->>>>>>>> $QMPSHELL -p $QMPSOCK <<EOF
->
->>>>>>>>        migrate-set-parameters mode=cpr-transfer
->
->>>>>>>>        migrate channels=[{"channel-type":"main","addr":
->
->>>>>>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
->
->>>>>>>> {"channel-type":"cpr","addr":
->
->>>>>>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
->
->>>>>>>> dst.sock"}}]
->
->>>>>>>> EOF
->
->>>>>>>
->
->>>>>>> Then, after a while, QXL guest driver on target crashes spewing the
->
->>>>>>> following messages:
->
->>>>>>>> [   73.962002] [TTM] Buffer eviction failed
->
->>>>>>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
->
->>>>>>>> 0x00000001)
->
->>>>>>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
->
->>>>>>>> allocate VRAM BO
->
->>>>>>>
->
->>>>>>> That seems to be a known kernel QXL driver bug:
->
->>>>>>>
->
->>>>>>>
-https://lore.kernel.org/all/20220907094423.93581-1-
->
->>>>>>> min_halo@163.com/T/
->
->>>>>>>
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
->
->>>>>>>
->
->>>>>>> (the latter discussion contains that reproduce script which
->
->>>>>>> speeds up
->
->>>>>>> the crash in the guest):
->
->>>>>>>> #!/bin/bash
->
->>>>>>>>
->
->>>>>>>> chvt 3
->
->>>>>>>>
->
->>>>>>>> for j in $(seq 80); do
->
->>>>>>>>            echo "$(date) starting round $j"
->
->>>>>>>>            if [ "$(journalctl --boot | grep "failed to allocate
->
->>>>>>>> VRAM
->
->>>>>>>> BO")" != "" ]; then
->
->>>>>>>>                    echo "bug was reproduced after $j tries"
->
->>>>>>>>                    exit 1
->
->>>>>>>>            fi
->
->>>>>>>>            for i in $(seq 100); do
->
->>>>>>>>                    dmesg > /dev/tty3
->
->>>>>>>>            done
->
->>>>>>>> done
->
->>>>>>>>
->
->>>>>>>> echo "bug could not be reproduced"
->
->>>>>>>> exit 0
->
->>>>>>>
->
->>>>>>> The bug itself seems to remain unfixed, as I was able to reproduce
->
->>>>>>> that
->
->>>>>>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
->
->>>>>>> cpr-transfer code also seems to be buggy as it triggers the crash -
->
->>>>>>> without the cpr-transfer migration the above reproduce doesn't
->
->>>>>>> lead to
->
->>>>>>> crash on the source VM.
->
->>>>>>>
->
->>>>>>> I suspect that, as cpr-transfer doesn't migrate the guest
->
->>>>>>> memory, but
->
->>>>>>> rather passes it through the memory backend object, our code might
->
->>>>>>> somehow corrupt the VRAM.  However, I wasn't able to trace the
->
->>>>>>> corruption so far.
->
->>>>>>>
->
->>>>>>> Could somebody help the investigation and take a look into
->
->>>>>>> this?  Any
->
->>>>>>> suggestions would be appreciated.  Thanks!
->
->>>>>>
->
->>>>>> Possibly some memory region created by qxl is not being preserved.
->
->>>>>> Try adding these traces to see what is preserved:
->
->>>>>>
->
->>>>>> -trace enable='*cpr*'
->
->>>>>> -trace enable='*ram_alloc*'
->
->>>>>
->
->>>>> Also try adding this patch to see if it flags any ram blocks as not
->
->>>>> compatible with cpr.  A message is printed at migration start time.
->
->>>>>   Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
->
->>>>> email-
->
->>>>> steven.sistare@oracle.com/
->
->>>>>
->
->>>>> - Steve
->
->>>>>
->
->>>>
->
->>>> With the traces enabled + the "migration: ram block cpr blockers"
->
->>>> patch
->
->>>> applied:
->
->>>>
->
->>>> Source:
->
->>>>> cpr_find_fd pc.bios, id 0 returns -1
->
->>>>> cpr_save_fd pc.bios, id 0, fd 22
->
->>>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
->
->>>>> 0x7fec18e00000
->
->>>>> cpr_find_fd pc.rom, id 0 returns -1
->
->>>>> cpr_save_fd pc.rom, id 0, fd 23
->
->>>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
->
->>>>> 0x7fec18c00000
->
->>>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
->
->>>>> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
->
->>>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
->
->>>>> 262144 fd 24 host 0x7fec18a00000
->
->>>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
->
->>>>> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
->
->>>>> 67108864 fd 25 host 0x7feb77e00000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
->
->>>>> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
->
->>>>> fd 27 host 0x7fec18800000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
->
->>>>> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
->
->>>>> 67108864 fd 28 host 0x7feb73c00000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
->
->>>>> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
->
->>>>> fd 34 host 0x7fec18600000
->
->>>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
->
->>>>> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
->
->>>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
->
->>>>> 2097152 fd 35 host 0x7fec18200000
->
->>>>> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
->
->>>>> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
->
->>>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
->
->>>>> fd 36 host 0x7feb8b600000
->
->>>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
->
->>>>> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
->
->>>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
->
->>>>> 37 host 0x7feb8b400000
->
->>>>>
->
->>>>> cpr_state_save cpr-transfer mode
->
->>>>> cpr_transfer_output /var/run/alma8cpr-dst.sock
->
->>>>
->
->>>> Target:
->
->>>>> cpr_transfer_input /var/run/alma8cpr-dst.sock
->
->>>>> cpr_state_load cpr-transfer mode
->
->>>>> cpr_find_fd pc.bios, id 0 returns 20
->
->>>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
->
->>>>> 0x7fcdc9800000
->
->>>>> cpr_find_fd pc.rom, id 0 returns 19
->
->>>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
->
->>>>> 0x7fcdc9600000
->
->>>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
->
->>>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
->
->>>>> 262144 fd 18 host 0x7fcdc9400000
->
->>>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
->
->>>>> 67108864 fd 17 host 0x7fcd27e00000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
->
->>>>> fd 16 host 0x7fcdc9200000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
->
->>>>> 67108864 fd 15 host 0x7fcd23c00000
->
->>>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
->
->>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
->
->>>>> fd 14 host 0x7fcdc8800000
->
->>>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
->
->>>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
->
->>>>> 2097152 fd 13 host 0x7fcdc8400000
->
->>>>> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
->
->>>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
->
->>>>> fd 11 host 0x7fcdc8200000
->
->>>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
->
->>>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
->
->>>>> 10 host 0x7fcd3be00000
->
->>>>
->
->>>> Looks like both vga.vram and qxl.vram are being preserved (with the
->
->>>> same
->
->>>> addresses), and no incompatible ram blocks are found during migration.
->
->>>
->
->>> Sorry, addressed are not the same, of course.  However corresponding
->
->>> ram
->
->>> blocks do seem to be preserved and initialized.
->
->>
->
->> So far, I have not reproduced the guest driver failure.
->
->>
->
->> However, I have isolated places where new QEMU improperly writes to
->
->> the qxl memory regions prior to starting the guest, by mmap'ing them
->
->> readonly after cpr:
->
->>
->
->>    qemu_ram_alloc_internal()
->
->>      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
->
->>          ram_flags |= RAM_READONLY;
->
->>      new_block = qemu_ram_alloc_from_fd(...)
->
->>
->
->> I have attached a draft fix; try it and let me know.
->
->> My console window looks fine before and after cpr, using
->
->> -vnc $hostip:0 -vga qxl
->
->>
->
->> - Steve
->
->
->
-> Regarding the reproduce: when I launch the buggy version with the same
->
-> options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
->
-> my VNC client silently hangs on the target after a while.  Could it
->
-> happen on your stand as well?Â
->
->
-cpr does not preserve the vnc connection and session.  To test, I specify
->
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
->
-dormant the dest vnc becomes active.
->
-Sure, I meant that VNC on the dest (on the port 1) works for a while
-after the migration and then hangs, apparently after the guest QXL crash.
-
->
-> Could you try launching VM with
->
-> "-nographic -device qxl-vga"?  That way VM's serial console is given you
->
-> directly in the shell, so when qxl driver crashes you're still able to
->
-> inspect the kernel messages.
->
->
-I have been running like that, but have not reproduced the qxl driver
->
-crash,
->
-and I suspect my guest image+kernel is too old.
-Yes, that's probably the case.  But the crash occurs on my Fedora 41
-guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
-be buggy.
-
-
->
-However, once I realized the
->
-issue was post-cpr modification of qxl memory, I switched my attention
->
-to the
->
-fix.
->
->
-> As for your patch, I can report that it doesn't resolve the issue as it
->
-> is.  But I was able to track down another possible memory corruption
->
-> using your approach with readonly mmap'ing:
->
->
->
->> Program terminated with signal SIGSEGV, Segmentation fault.
->
->> #0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
->
->> 412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
->
->> [Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
->
->> (gdb) bt
->
->> #0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
->
->> #1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
->
->> errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
->
->> #2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
->
->> errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
->
->> #3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
->
->> errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
->
->> #4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
->
->> value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
->
->> #5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
->
->> v=0x5638996f3770, name=0x56389759b141 "realized",
->
->> opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
->
->>      at ../qom/object.c:2374
->
->> #6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
->
->> name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
->
->>      at ../qom/object.c:1449
->
->> #7  0x00005638970f8586 in object_property_set_qobject
->
->> (obj=0x5638996e0e70, name=0x56389759b141 "realized",
->
->> value=0x5638996df900, errp=0x7ffd3c2b84e0)
->
->>      at ../qom/qom-qobject.c:28
->
->> #8  0x00005638970f3d8d in object_property_set_bool
->
->> (obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
->
->> errp=0x7ffd3c2b84e0)
->
->>      at ../qom/object.c:1519
->
->> #9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
->
->> bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
->
->> #10 0x0000563896dba675 in qdev_device_add_from_qdict
->
->> (opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
->
->> system/qdev-monitor.c:714
->
->> #11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
->
->> errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
->
->> #12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
->
->> opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
->
->> vl.c:1207
->
->> #13 0x000056389737a6cc in qemu_opts_foreach
->
->>      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
->
->> <device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
->
->>      at ../util/qemu-option.c:1135
->
->> #14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
->
->> vl.c:2745
->
->> #15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
->
->> <error_fatal>) at ../system/vl.c:2806
->
->> #16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
->
->> at ../system/vl.c:3838
->
->> #17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
->
->> system/main.c:72
->
->
->
-> So the attached adjusted version of your patch does seem to help.  At
->
-> least I can't reproduce the crash on my stand.
->
->
-Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
->
-are
->
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
->
-of init_qxl_ram that modify guest memory.
->
-Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
-it to the list as a proper fix?
-
->
-> I'm wondering, could it be useful to explicitly mark all the reused
->
-> memory regions readonly upon cpr-transfer, and then make them writable
->
-> back again after the migration is done?  That way we will be segfaulting
->
-> early on instead of debugging tricky memory corruptions.
->
->
-It's a useful debugging technique, but changing protection on a large
->
-memory region
->
-can be too expensive for production due to TLB shootdowns.
->
->
-Also, there are cases where writes are performed but the value is
->
-guaranteed to
->
-be the same:
->
-  qxl_post_load()
->
-    qxl_set_mode()
->
-      d->rom->mode = cpu_to_le32(modenr);
->
-The value is the same because mode and shadow_rom.mode were passed in
->
-vmstate
->
-from old qemu.
->
-There're also cases where devices' ROM might be re-initialized.  E.g.
-this segfault occures upon further exploration of RO mapped RAM blocks:
-
->
-Program terminated with signal SIGSEGV, Segmentation fault.
->
-#0  __memmove_avx_unaligned_erms () at
->
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
->
-664             rep     movsb
->
-[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
->
-(gdb) bt
->
-#0  __memmove_avx_unaligned_erms () at
->
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
->
-#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380,
->
-owner=0x55aa2019ac10, name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
->
-at ../hw/core/loader.c:1032
->
-#2  0x000055aa1d031577 in rom_add_blob
->
-(name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072,
->
-max_len=2097152, addr=18446744073709551615, fw_file_name=0x55aa1da51f13
->
-"etc/acpi/tables", fw_callback=0x55aa1d441f59 <acpi_build_update>,
->
-callback_opaque=0x55aa20ff0010, as=0x0, read_only=true) at
->
-../hw/core/loader.c:1147
->
-#3  0x000055aa1cfd788d in acpi_add_rom_blob
->
-(update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010,
->
-blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at
->
-../hw/acpi/utils.c:46
->
-#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
->
-#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0)
->
-at ../hw/i386/pc.c:638
->
-#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10
->
-<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
->
-#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at
->
-../hw/core/machine.c:1749
->
-#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40
->
-<error_fatal>) at ../system/vl.c:2779
->
-#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40
->
-<error_fatal>) at ../system/vl.c:2807
->
-#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at
->
-../system/vl.c:3838
->
-#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at
->
-../system/main.c:72
-I'm not sure whether ACPI tables ROM in particular is rewritten with the
-same content, but there might be cases where ROM can be read from file
-system upon initialization.  That is undesirable as guest kernel
-certainly won't be too happy about sudden change of the device's ROM
-content.
-
-So the issue we're dealing with here is any unwanted memory related
-device initialization upon cpr.
-
-For now the only thing that comes to my mind is to make a test where we
-put as many devices as we can into a VM, make ram blocks RO upon cpr
-(and remap them as RW later after migration is done, if needed), and
-catch any unwanted memory violations.  As Den suggested, we might
-consider adding that behaviour as a separate non-default option (or
-"migrate" command flag specific to cpr-transfer), which would only be
-used in the testing.
-
-Andrey
-
-On 3/6/25 16:16, Andrey Drobyshev wrote:
-On 3/5/25 11:19 PM, Steven Sistare wrote:
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
-On 3/4/25 9:05 PM, Steven Sistare wrote:
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently
-and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga \
-        -incoming tcp:0:44444 \
-        -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-        migrate-set-parameters mode=cpr-transfer
-        migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-
-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which
-speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-            echo "$(date) starting round $j"
-            if [ "$(journalctl --boot | grep "failed to allocate
-VRAM
-BO")" != "" ]; then
-                    echo "bug was reproduced after $j tries"
-                    exit 1
-            fi
-            for i in $(seq 100); do
-                    dmesg > /dev/tty3
-            done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce
-that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't
-lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest
-memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into
-this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-   Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers"
-patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 24 host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 27 host 0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 34 host 0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 35 host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 36 host 0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-37 host 0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 18 host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 16 host 0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 14 host 0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 13 host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 11 host 0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-10 host 0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the
-same
-addresses), and no incompatible ram blocks are found during migration.
-Sorry, addressed are not the same, of course.  However corresponding
-ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-    qemu_ram_alloc_internal()
-      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-          ram_flags |= RAM_READONLY;
-      new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?
-cpr does not preserve the vnc connection and session.  To test, I specify
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
-dormant the dest vnc becomes active.
-Sure, I meant that VNC on the dest (on the port 1) works for a while
-after the migration and then hangs, apparently after the guest QXL crash.
-Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-I have been running like that, but have not reproduced the qxl driver
-crash,
-and I suspect my guest image+kernel is too old.
-Yes, that's probably the case.  But the crash occurs on my Fedora 41
-guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
-be buggy.
-However, once I realized the
-issue was post-cpr modification of qxl memory, I switched my attention
-to the
-fix.
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
-(gdb) bt
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
-value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
-v=0x5638996f3770, name=0x56389759b141 "realized",
-opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:2374
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
-name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1449
-#7  0x00005638970f8586 in object_property_set_qobject
-(obj=0x5638996e0e70, name=0x56389759b141 "realized",
-value=0x5638996df900, errp=0x7ffd3c2b84e0)
-      at ../qom/qom-qobject.c:28
-#8  0x00005638970f3d8d in object_property_set_bool
-(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
-errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1519
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
-bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
-#10 0x0000563896dba675 in qdev_device_add_from_qdict
-(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
-system/qdev-monitor.c:714
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
-errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
-opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
-vl.c:1207
-#13 0x000056389737a6cc in qemu_opts_foreach
-      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
-<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
-      at ../util/qemu-option.c:1135
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
-vl.c:2745
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
-<error_fatal>) at ../system/vl.c:2806
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
-at ../system/vl.c:3838
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
-system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
-are
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
-of init_qxl_ram that modify guest memory.
-Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
-it to the list as a proper fix?
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-It's a useful debugging technique, but changing protection on a large
-memory region
-can be too expensive for production due to TLB shootdowns.
-
-Also, there are cases where writes are performed but the value is
-guaranteed to
-be the same:
-   qxl_post_load()
-     qxl_set_mode()
-       d->rom->mode = cpu_to_le32(modenr);
-The value is the same because mode and shadow_rom.mode were passed in
-vmstate
-from old qemu.
-There're also cases where devices' ROM might be re-initialized.  E.g.
-this segfault occures upon further exploration of RO mapped RAM blocks:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-664             rep     movsb
-[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
-(gdb) bt
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
-name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
-     at ../hw/core/loader.c:1032
-#2  0x000055aa1d031577 in rom_add_blob
-     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
-addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
-fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
-read_only=true) at ../hw/core/loader.c:1147
-#3  0x000055aa1cfd788d in acpi_add_rom_blob
-     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
-blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
-#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
-#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
-at ../hw/i386/pc.c:638
-#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
-<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
-#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
-../hw/core/machine.c:1749
-#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2779
-#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2807
-#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
-../system/vl.c:3838
-#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
-../system/main.c:72
-I'm not sure whether ACPI tables ROM in particular is rewritten with the
-same content, but there might be cases where ROM can be read from file
-system upon initialization.  That is undesirable as guest kernel
-certainly won't be too happy about sudden change of the device's ROM
-content.
-
-So the issue we're dealing with here is any unwanted memory related
-device initialization upon cpr.
-
-For now the only thing that comes to my mind is to make a test where we
-put as many devices as we can into a VM, make ram blocks RO upon cpr
-(and remap them as RW later after migration is done, if needed), and
-catch any unwanted memory violations.  As Den suggested, we might
-consider adding that behaviour as a separate non-default option (or
-"migrate" command flag specific to cpr-transfer), which would only be
-used in the testing.
-
-Andrey
-No way. ACPI with the source must be used in the same way as BIOSes
-and optional ROMs.
-
-Den
-
-On 3/6/2025 10:52 AM, Denis V. Lunev wrote:
-On 3/6/25 16:16, Andrey Drobyshev wrote:
-On 3/5/25 11:19 PM, Steven Sistare wrote:
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
-On 3/4/25 9:05 PM, Steven Sistare wrote:
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently
-and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga \
-        -incoming tcp:0:44444 \
-        -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-        migrate-set-parameters mode=cpr-transfer
-        migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-
-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which
-speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-            echo "$(date) starting round $j"
-            if [ "$(journalctl --boot | grep "failed to allocate
-VRAM
-BO")" != "" ]; then
-                    echo "bug was reproduced after $j tries"
-                    exit 1
-            fi
-            for i in $(seq 100); do
-                    dmesg > /dev/tty3
-            done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce
-that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't
-lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest
-memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into
-this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-   Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers"
-patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 24 host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 27 host 0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 34 host 0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 35 host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 36 host 0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-37 host 0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 18 host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 16 host 0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 14 host 0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 13 host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 11 host 0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-10 host 0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the
-same
-addresses), and no incompatible ram blocks are found during migration.
-Sorry, addressed are not the same, of course.  However corresponding
-ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-    qemu_ram_alloc_internal()
-      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-          ram_flags |= RAM_READONLY;
-      new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?
-cpr does not preserve the vnc connection and session.  To test, I specify
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
-dormant the dest vnc becomes active.
-Sure, I meant that VNC on the dest (on the port 1) works for a while
-after the migration and then hangs, apparently after the guest QXL crash.
-Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-I have been running like that, but have not reproduced the qxl driver
-crash,
-and I suspect my guest image+kernel is too old.
-Yes, that's probably the case.  But the crash occurs on my Fedora 41
-guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
-be buggy.
-However, once I realized the
-issue was post-cpr modification of qxl memory, I switched my attention
-to the
-fix.
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
-(gdb) bt
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
-value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
-v=0x5638996f3770, name=0x56389759b141 "realized",
-opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:2374
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
-name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1449
-#7  0x00005638970f8586 in object_property_set_qobject
-(obj=0x5638996e0e70, name=0x56389759b141 "realized",
-value=0x5638996df900, errp=0x7ffd3c2b84e0)
-      at ../qom/qom-qobject.c:28
-#8  0x00005638970f3d8d in object_property_set_bool
-(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
-errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1519
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
-bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
-#10 0x0000563896dba675 in qdev_device_add_from_qdict
-(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
-system/qdev-monitor.c:714
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
-errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
-opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
-vl.c:1207
-#13 0x000056389737a6cc in qemu_opts_foreach
-      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
-<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
-      at ../util/qemu-option.c:1135
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
-vl.c:2745
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
-<error_fatal>) at ../system/vl.c:2806
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
-at ../system/vl.c:3838
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
-system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
-are
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
-of init_qxl_ram that modify guest memory.
-Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
-it to the list as a proper fix?
-Yes.  Was waiting for your confirmation.
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-It's a useful debugging technique, but changing protection on a large
-memory region
-can be too expensive for production due to TLB shootdowns.
-
-Also, there are cases where writes are performed but the value is
-guaranteed to
-be the same:
-   qxl_post_load()
-     qxl_set_mode()
-       d->rom->mode = cpu_to_le32(modenr);
-The value is the same because mode and shadow_rom.mode were passed in
-vmstate
-from old qemu.
-There're also cases where devices' ROM might be re-initialized.  E.g.
-this segfault occures upon further exploration of RO mapped RAM blocks:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-664             rep     movsb
-[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
-(gdb) bt
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
-name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
-     at ../hw/core/loader.c:1032
-#2  0x000055aa1d031577 in rom_add_blob
-     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
-addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
-fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
-read_only=true) at ../hw/core/loader.c:1147
-#3  0x000055aa1cfd788d in acpi_add_rom_blob
-     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
-blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
-#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
-#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
-at ../hw/i386/pc.c:638
-#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
-<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
-#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
-../hw/core/machine.c:1749
-#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2779
-#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2807
-#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
-../system/vl.c:3838
-#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
-../system/main.c:72
-I'm not sure whether ACPI tables ROM in particular is rewritten with the
-same content, but there might be cases where ROM can be read from file
-system upon initialization.  That is undesirable as guest kernel
-certainly won't be too happy about sudden change of the device's ROM
-content.
-
-So the issue we're dealing with here is any unwanted memory related
-device initialization upon cpr.
-
-For now the only thing that comes to my mind is to make a test where we
-put as many devices as we can into a VM, make ram blocks RO upon cpr
-(and remap them as RW later after migration is done, if needed), and
-catch any unwanted memory violations.  As Den suggested, we might
-consider adding that behaviour as a separate non-default option (or
-"migrate" command flag specific to cpr-transfer), which would only be
-used in the testing.
-I'll look into adding an option, but there may be too many false positives,
-such as the qxl_set_mode case above.  And the maintainers may object to me
-eliminating the false positives by adding more CPR_IN tests, due to gratuitous
-(from their POV) ugliness.
-
-But I will use the technique to look for more write violations.
-Andrey
-No way. ACPI with the source must be used in the same way as BIOSes
-and optional ROMs.
-Yup, its a bug.  Will fix.
-
-- Steve
-
-see
-1741380954-341079-1-git-send-email-steven.sistare@oracle.com
-/">https://lore.kernel.org/qemu-devel/
-1741380954-341079-1-git-send-email-steven.sistare@oracle.com
-/
-- Steve
-
-On 3/6/2025 11:13 AM, Steven Sistare wrote:
-On 3/6/2025 10:52 AM, Denis V. Lunev wrote:
-On 3/6/25 16:16, Andrey Drobyshev wrote:
-On 3/5/25 11:19 PM, Steven Sistare wrote:
-On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
-On 3/4/25 9:05 PM, Steven Sistare wrote:
-On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
-On 2/28/25 8:20 PM, Steven Sistare wrote:
-On 2/28/2025 1:13 PM, Steven Sistare wrote:
-On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
-Hi all,
-
-We've been experimenting with cpr-transfer migration mode recently
-and
-have discovered the following issue with the guest QXL driver:
-
-Run migration source:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga
-Run migration target:
-EMULATOR=/path/to/emulator
-ROOTFS=/path/to/image
-QMPSOCK=/var/run/alma8qmp-dst.sock
-$EMULATOR -enable-kvm \
-        -machine q35 \
-        -cpu host -smp 2 -m 2G \
-        -object memory-backend-file,id=ram0,size=2G,mem-path=/
-dev/shm/
-ram0,share=on\
-        -machine memory-backend=ram0 \
-        -machine aux-ram-share=on \
-        -drive file=$ROOTFS,media=disk,if=virtio \
-        -qmp unix:$QMPSOCK,server=on,wait=off \
-        -nographic \
-        -device qxl-vga \
-        -incoming tcp:0:44444 \
-        -incoming '{"channel-type": "cpr", "addr": { "transport":
-"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
-Launch the migration:
-QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
-QMPSOCK=/var/run/alma8qmp-src.sock
-
-$QMPSHELL -p $QMPSOCK <<EOF
-        migrate-set-parameters mode=cpr-transfer
-        migrate channels=[{"channel-type":"main","addr":
-{"transport":"socket","type":"inet","host":"0","port":"44444"}},
-{"channel-type":"cpr","addr":
-{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
-dst.sock"}}]
-EOF
-Then, after a while, QXL guest driver on target crashes spewing the
-following messages:
-[   73.962002] [TTM] Buffer eviction failed
-[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
-0x00000001)
-[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
-allocate VRAM BO
-That seems to be a known kernel QXL driver bug:
-https://lore.kernel.org/all/20220907094423.93581-1-
-min_halo@163.com/T/
-https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
-(the latter discussion contains that reproduce script which
-speeds up
-the crash in the guest):
-#!/bin/bash
-
-chvt 3
-
-for j in $(seq 80); do
-            echo "$(date) starting round $j"
-            if [ "$(journalctl --boot | grep "failed to allocate
-VRAM
-BO")" != "" ]; then
-                    echo "bug was reproduced after $j tries"
-                    exit 1
-            fi
-            for i in $(seq 100); do
-                    dmesg > /dev/tty3
-            done
-done
-
-echo "bug could not be reproduced"
-exit 0
-The bug itself seems to remain unfixed, as I was able to reproduce
-that
-with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
-cpr-transfer code also seems to be buggy as it triggers the crash -
-without the cpr-transfer migration the above reproduce doesn't
-lead to
-crash on the source VM.
-
-I suspect that, as cpr-transfer doesn't migrate the guest
-memory, but
-rather passes it through the memory backend object, our code might
-somehow corrupt the VRAM.  However, I wasn't able to trace the
-corruption so far.
-
-Could somebody help the investigation and take a look into
-this?  Any
-suggestions would be appreciated.  Thanks!
-Possibly some memory region created by qxl is not being preserved.
-Try adding these traces to see what is preserved:
-
--trace enable='*cpr*'
--trace enable='*ram_alloc*'
-Also try adding this patch to see if it flags any ram blocks as not
-compatible with cpr.  A message is printed at migration start time.
-   Â
-https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
-email-
-steven.sistare@oracle.com/
-
-- Steve
-With the traces enabled + the "migration: ram block cpr blockers"
-patch
-applied:
-
-Source:
-cpr_find_fd pc.bios, id 0 returns -1
-cpr_save_fd pc.bios, id 0, fd 22
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
-0x7fec18e00000
-cpr_find_fd pc.rom, id 0 returns -1
-cpr_save_fd pc.rom, id 0, fd 23
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
-0x7fec18c00000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
-cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 24 host 0x7fec18a00000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 25 host 0x7feb77e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 27 host 0x7fec18800000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 28 host 0x7feb73c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
-cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 34 host 0x7fec18600000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 35 host 0x7fec18200000
-cpr_find_fd /rom@etc/table-loader, id 0 returns -1
-cpr_save_fd /rom@etc/table-loader, id 0, fd 36
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 36 host 0x7feb8b600000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
-cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-37 host 0x7feb8b400000
-
-cpr_state_save cpr-transfer mode
-cpr_transfer_output /var/run/alma8cpr-dst.sock
-Target:
-cpr_transfer_input /var/run/alma8cpr-dst.sock
-cpr_state_load cpr-transfer mode
-cpr_find_fd pc.bios, id 0 returns 20
-qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
-0x7fcdc9800000
-cpr_find_fd pc.rom, id 0 returns 19
-qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
-0x7fcdc9600000
-cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
-qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
-262144 fd 18 host 0x7fcdc9400000
-cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
-qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
-67108864 fd 17 host 0x7fcd27e00000
-cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
-fd 16 host 0x7fcdc9200000
-cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
-qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
-67108864 fd 15 host 0x7fcd23c00000
-cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
-qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
-fd 14 host 0x7fcdc8800000
-cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
-qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
-2097152 fd 13 host 0x7fcdc8400000
-cpr_find_fd /rom@etc/table-loader, id 0 returns 11
-qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
-fd 11 host 0x7fcdc8200000
-cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
-qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
-10 host 0x7fcd3be00000
-Looks like both vga.vram and qxl.vram are being preserved (with the
-same
-addresses), and no incompatible ram blocks are found during migration.
-Sorry, addressed are not the same, of course.  However corresponding
-ram
-blocks do seem to be preserved and initialized.
-So far, I have not reproduced the guest driver failure.
-
-However, I have isolated places where new QEMU improperly writes to
-the qxl memory regions prior to starting the guest, by mmap'ing them
-readonly after cpr:
-
-    qemu_ram_alloc_internal()
-      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
-          ram_flags |= RAM_READONLY;
-      new_block = qemu_ram_alloc_from_fd(...)
-
-I have attached a draft fix; try it and let me know.
-My console window looks fine before and after cpr, using
--vnc $hostip:0 -vga qxl
-
-- Steve
-Regarding the reproduce: when I launch the buggy version with the same
-options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
-my VNC client silently hangs on the target after a while.  Could it
-happen on your stand as well?
-cpr does not preserve the vnc connection and session.  To test, I specify
-port 0 for the source VM and port 1 for the dest.  When the src vnc goes
-dormant the dest vnc becomes active.
-Sure, I meant that VNC on the dest (on the port 1) works for a while
-after the migration and then hangs, apparently after the guest QXL crash.
-Could you try launching VM with
-"-nographic -device qxl-vga"?  That way VM's serial console is given you
-directly in the shell, so when qxl driver crashes you're still able to
-inspect the kernel messages.
-I have been running like that, but have not reproduced the qxl driver
-crash,
-and I suspect my guest image+kernel is too old.
-Yes, that's probably the case.  But the crash occurs on my Fedora 41
-guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
-be buggy.
-However, once I realized the
-issue was post-cpr modification of qxl memory, I switched my attention
-to the
-fix.
-As for your patch, I can report that it doesn't resolve the issue as it
-is.  But I was able to track down another possible memory corruption
-using your approach with readonly mmap'ing:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
-[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
-(gdb) bt
-#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
-#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
-errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
-#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
-errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
-#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
-errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
-#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
-value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
-#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
-v=0x5638996f3770, name=0x56389759b141 "realized",
-opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:2374
-#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
-name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1449
-#7  0x00005638970f8586 in object_property_set_qobject
-(obj=0x5638996e0e70, name=0x56389759b141 "realized",
-value=0x5638996df900, errp=0x7ffd3c2b84e0)
-      at ../qom/qom-qobject.c:28
-#8  0x00005638970f3d8d in object_property_set_bool
-(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
-errp=0x7ffd3c2b84e0)
-      at ../qom/object.c:1519
-#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
-bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
-#10 0x0000563896dba675 in qdev_device_add_from_qdict
-(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
-system/qdev-monitor.c:714
-#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
-errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
-#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
-opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
-vl.c:1207
-#13 0x000056389737a6cc in qemu_opts_foreach
-      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
-<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
-      at ../util/qemu-option.c:1135
-#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
-vl.c:2745
-#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
-<error_fatal>) at ../system/vl.c:2806
-#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
-at ../system/vl.c:3838
-#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
-system/main.c:72
-So the attached adjusted version of your patch does seem to help.  At
-least I can't reproduce the crash on my stand.
-Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
-are
-definitely harmful.  Try V2 of the patch, attached, which skips the lines
-of init_qxl_ram that modify guest memory.
-Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
-it to the list as a proper fix?
-Yes.  Was waiting for your confirmation.
-I'm wondering, could it be useful to explicitly mark all the reused
-memory regions readonly upon cpr-transfer, and then make them writable
-back again after the migration is done?  That way we will be segfaulting
-early on instead of debugging tricky memory corruptions.
-It's a useful debugging technique, but changing protection on a large
-memory region
-can be too expensive for production due to TLB shootdowns.
-
-Also, there are cases where writes are performed but the value is
-guaranteed to
-be the same:
-   qxl_post_load()
-     qxl_set_mode()
-       d->rom->mode = cpu_to_le32(modenr);
-The value is the same because mode and shadow_rom.mode were passed in
-vmstate
-from old qemu.
-There're also cases where devices' ROM might be re-initialized.  E.g.
-this segfault occures upon further exploration of RO mapped RAM blocks:
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-664             rep     movsb
-[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
-(gdb) bt
-#0  __memmove_avx_unaligned_erms () at 
-../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
-#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
-name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
-     at ../hw/core/loader.c:1032
-#2  0x000055aa1d031577 in rom_add_blob
-     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
-addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
-fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
-read_only=true) at ../hw/core/loader.c:1147
-#3  0x000055aa1cfd788d in acpi_add_rom_blob
-     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
-blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
-#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
-#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
-at ../hw/i386/pc.c:638
-#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
-<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
-#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
-../hw/core/machine.c:1749
-#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2779
-#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
-<error_fatal>) at ../system/vl.c:2807
-#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
-../system/vl.c:3838
-#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
-../system/main.c:72
-I'm not sure whether ACPI tables ROM in particular is rewritten with the
-same content, but there might be cases where ROM can be read from file
-system upon initialization.  That is undesirable as guest kernel
-certainly won't be too happy about sudden change of the device's ROM
-content.
-
-So the issue we're dealing with here is any unwanted memory related
-device initialization upon cpr.
-
-For now the only thing that comes to my mind is to make a test where we
-put as many devices as we can into a VM, make ram blocks RO upon cpr
-(and remap them as RW later after migration is done, if needed), and
-catch any unwanted memory violations.  As Den suggested, we might
-consider adding that behaviour as a separate non-default option (or
-"migrate" command flag specific to cpr-transfer), which would only be
-used in the testing.
-I'll look into adding an option, but there may be too many false positives,
-such as the qxl_set_mode case above.  And the maintainers may object to me
-eliminating the false positives by adding more CPR_IN tests, due to gratuitous
-(from their POV) ugliness.
-
-But I will use the technique to look for more write violations.
-Andrey
-No way. ACPI with the source must be used in the same way as BIOSes
-and optional ROMs.
-Yup, its a bug.  Will fix.
-
-- Steve
-
diff --git a/results/classifier/005/device/42226390 b/results/classifier/005/device/42226390
deleted file mode 100644
index 685aeaae..00000000
--- a/results/classifier/005/device/42226390
+++ /dev/null
@@ -1,195 +0,0 @@
-device: 0.951
-boot: 0.943
-graphic: 0.942
-instruction: 0.925
-semantic: 0.924
-assembly: 0.919
-KVM: 0.905
-network: 0.894
-other: 0.894
-socket: 0.882
-vnc: 0.853
-mistranslation: 0.826
-
-[BUG] AArch64 boot hang with -icount and -smp >1 (iothread locking issue?)
-
-Hello,
-
-I am encountering one or more bugs when using -icount and -smp >1 that I am
-attempting to sort out. My current theory is that it is an iothread locking
-issue.
-
-I am using a command-line like the following where $kernel is a recent upstream
-AArch64 Linux kernel Image (I can provide a binary if that would be helpful -
-let me know how is best to post):
-
-        qemu-system-aarch64 \
-                -M virt -cpu cortex-a57 -m 1G \
-                -nographic \
-                -smp 2 \
-                -icount 0 \
-                -kernel $kernel
-
-For any/all of the symptoms described below, they seem to disappear when I
-either remove `-icount 0` or change smp to `-smp 1`. In other words, it is the
-combination of `-smp >1` and `-icount` which triggers what I'm seeing.
-
-I am seeing two different (but seemingly related) behaviors. The first (and
-what I originally started debugging) shows up as a boot hang. When booting
-using the above command after Peter's "icount: Take iothread lock when running
-QEMU timers" patch [1], The kernel boots for a while and then hangs after:
-
->
-...snip...
->
-[    0.010764] Serial: AMBA PL011 UART driver
->
-[    0.016334] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud
->
-= 0) is a PL011 rev1
->
-[    0.016907] printk: console [ttyAMA0] enabled
->
-[    0.017624] KASLR enabled
->
-[    0.031986] HugeTLB: registered 16.0 GiB page size, pre-allocated 0 pages
->
-[    0.031986] HugeTLB: 16320 KiB vmemmap can be freed for a 16.0 GiB page
->
-[    0.031986] HugeTLB: registered 512 MiB page size, pre-allocated 0 pages
->
-[    0.031986] HugeTLB: 448 KiB vmemmap can be freed for a 512 MiB page
->
-[    0.031986] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
->
-[    0.031986] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
-When it hangs here, I drop into QEMU's console, attach to the gdbserver, and it
-always reports that it is at address 0xffff800008dc42e8 (as shown below from an
-objdump of the vmlinux). I note this is in the middle of messing with timer
-system registers - which makes me suspect we're attempting to take the iothread
-lock when its already held:
-
->
-ffff800008dc42b8 <arch_timer_set_next_event_virt>:
->
-ffff800008dc42b8:       d503201f        nop
->
-ffff800008dc42bc:       d503201f        nop
->
-ffff800008dc42c0:       d503233f        paciasp
->
-ffff800008dc42c4:       d53be321        mrs     x1, cntv_ctl_el0
->
-ffff800008dc42c8:       32000021        orr     w1, w1, #0x1
->
-ffff800008dc42cc:       d5033fdf        isb
->
-ffff800008dc42d0:       d53be042        mrs     x2, cntvct_el0
->
-ffff800008dc42d4:       ca020043        eor     x3, x2, x2
->
-ffff800008dc42d8:       8b2363e3        add     x3, sp, x3
->
-ffff800008dc42dc:       f940007f        ldr     xzr, [x3]
->
-ffff800008dc42e0:       8b020000        add     x0, x0, x2
->
-ffff800008dc42e4:       d51be340        msr     cntv_cval_el0, x0
->
-* ffff800008dc42e8:       927ef820        and     x0, x1, #0xfffffffffffffffd
->
-ffff800008dc42ec:       d51be320        msr     cntv_ctl_el0, x0
->
-ffff800008dc42f0:       d5033fdf        isb
->
-ffff800008dc42f4:       52800000        mov     w0, #0x0
->
-// #0
->
-ffff800008dc42f8:       d50323bf        autiasp
->
-ffff800008dc42fc:       d65f03c0        ret
-The second behavior is that prior to Peter's "icount: Take iothread lock when
-running QEMU timers" patch [1], I observe the following message (same command
-as above):
-
->
-ERROR:../accel/tcg/tcg-accel-ops.c:79:tcg_handle_interrupt: assertion failed:
->
-(qemu_mutex_iothread_locked())
->
-Aborted (core dumped)
-This is the same behavior described in Gitlab issue 1130 [0] and addressed by
-[1]. I bisected the appearance of this assertion, and found it was introduced
-by Pavel's "replay: rewrite async event handling" commit [2]. Commits prior to
-that one boot successfully (neither assertions nor hangs) with `-icount 0 -smp
-2`.
-
-I've looked over these two commits ([1], [2]), but it is not obvious to me
-how/why they might be interacting to produce the boot hangs I'm seeing and
-I welcome any help investigating further.
-
-Thanks!
-
--Aaron Lindsay
-
-[0] -
-https://gitlab.com/qemu-project/qemu/-/issues/1130
-[1] -
-https://gitlab.com/qemu-project/qemu/-/commit/c7f26ded6d5065e4116f630f6a490b55f6c5f58e
-[2] -
-https://gitlab.com/qemu-project/qemu/-/commit/60618e2d77691e44bb78e23b2b0cf07b5c405e56
-
-On Fri, 21 Oct 2022 at 16:48, Aaron Lindsay
-<aaron@os.amperecomputing.com> wrote:
->
->
-Hello,
->
->
-I am encountering one or more bugs when using -icount and -smp >1 that I am
->
-attempting to sort out. My current theory is that it is an iothread locking
->
-issue.
-Weird coincidence, that is a bug that's been in the tree for months
-but was only reported to me earlier this week. Try reverting
-commit a82fd5a4ec24d923ff1e -- that should fix it.
-CAFEAcA_i8x00hD-4XX18ySLNbCB6ds1-DSazVb4yDnF8skjd9A@mail.gmail.com
-/">https://lore.kernel.org/qemu-devel/
-CAFEAcA_i8x00hD-4XX18ySLNbCB6ds1-DSazVb4yDnF8skjd9A@mail.gmail.com
-/
-has the explanation.
-
-thanks
--- PMM
-
-On Oct 21 17:00, Peter Maydell wrote:
->
-On Fri, 21 Oct 2022 at 16:48, Aaron Lindsay
->
-<aaron@os.amperecomputing.com> wrote:
->
->
->
-> Hello,
->
->
->
-> I am encountering one or more bugs when using -icount and -smp >1 that I am
->
-> attempting to sort out. My current theory is that it is an iothread locking
->
-> issue.
->
->
-Weird coincidence, that is a bug that's been in the tree for months
->
-but was only reported to me earlier this week. Try reverting
->
-commit a82fd5a4ec24d923ff1e -- that should fix it.
-I can confirm that reverting a82fd5a4ec24d923ff1e fixes it for me.
-Thanks for the help and fast response!
-
--Aaron
-
diff --git a/results/classifier/005/device/48245039 b/results/classifier/005/device/48245039
deleted file mode 100644
index b1a9e651..00000000
--- a/results/classifier/005/device/48245039
+++ /dev/null
@@ -1,538 +0,0 @@
-assembly: 0.956
-device: 0.953
-other: 0.953
-instruction: 0.951
-semantic: 0.939
-graphic: 0.935
-socket: 0.932
-boot: 0.932
-vnc: 0.926
-mistranslation: 0.888
-KVM: 0.855
-network: 0.818
-
-[Qemu-devel] [BUG] gcov support appears to be broken
-
-Hello, according to out docs, here is the procedure that should produce 
-coverage report for execution of the complete "make check":
-
-#./configure --enable-gcov
-#make
-#make check
-#make coverage-report
-
-It seems that first three commands execute as expected. (For example, there are 
-plenty of files generated by "make check" that would've not been generated if 
-"enable-gcov" hadn't been chosen.) However, the last command complains about 
-some missing files related to FP support. If those files are added (for 
-example, artificially, using "touch <missing-file"), that it starts complaining 
-about missing some decodetree-generated files. Other kinds of files are 
-involved too.
-
-It would be nice to have coverage support working. Please somebody take a look, 
-or explain if I make a mistake or misunderstood our gcov support.
-
-Yours,
-Aleksandar
-
-On Mon, 5 Aug 2019 at 11:39, Aleksandar Markovic <address@hidden> wrote:
->
->
-Hello, according to out docs, here is the procedure that should produce
->
-coverage report for execution of the complete "make check":
->
->
-#./configure --enable-gcov
->
-#make
->
-#make check
->
-#make coverage-report
->
->
-It seems that first three commands execute as expected. (For example, there
->
-are plenty of files generated by "make check" that would've not been
->
-generated if "enable-gcov" hadn't been chosen.) However, the last command
->
-complains about some missing files related to FP support. If those files are
->
-added (for example, artificially, using "touch <missing-file"), that it
->
-starts complaining about missing some decodetree-generated files. Other kinds
->
-of files are involved too.
->
->
-It would be nice to have coverage support working. Please somebody take a
->
-look, or explain if I make a mistake or misunderstood our gcov support.
-Cc'ing Alex who's probably the closest we have to a gcov expert.
-
-(make/make check of a --enable-gcov build is in the set of things our
-Travis CI setup runs, so we do defend that part against regressions.)
-
-thanks
--- PMM
-
-Peter Maydell <address@hidden> writes:
-
->
-On Mon, 5 Aug 2019 at 11:39, Aleksandar Markovic <address@hidden> wrote:
->
->
->
-> Hello, according to out docs, here is the procedure that should produce
->
-> coverage report for execution of the complete "make check":
->
->
->
-> #./configure --enable-gcov
->
-> #make
->
-> #make check
->
-> #make coverage-report
->
->
->
-> It seems that first three commands execute as expected. (For example,
->
-> there are plenty of files generated by "make check" that would've not
->
-> been generated if "enable-gcov" hadn't been chosen.) However, the
->
-> last command complains about some missing files related to FP
->
-> support. If those files are added (for example, artificially, using
->
-> "touch <missing-file"), that it starts complaining about missing some
->
-> decodetree-generated files. Other kinds of files are involved too.
-The gcov tool is fairly noisy about missing files but that just
-indicates the tests haven't exercised those code paths. "make check"
-especially doesn't touch much of the TCG code and a chunk of floating
-point.
-
->
->
->
-> It would be nice to have coverage support working. Please somebody
->
-> take a look, or explain if I make a mistake or misunderstood our gcov
->
-> support.
-So your failure mode is no report is generated at all? It's working for
-me here.
-
->
->
-Cc'ing Alex who's probably the closest we have to a gcov expert.
->
->
-(make/make check of a --enable-gcov build is in the set of things our
->
-Travis CI setup runs, so we do defend that part against regressions.)
-We defend the build but I have just checked and it seems our
-check_coverage script is currently failing:
-https://travis-ci.org/stsquad/qemu/jobs/567809808#L10328
-But as it's an after_success script it doesn't fail the build.
-
->
->
-thanks
->
--- PMM
---
-Alex Bennée
-
->
-> #./configure --enable-gcov
->
-> #make
->
-> #make check
->
-> #make coverage-report
->
->
->
-> It seems that first three commands execute as expected. (For example,
->
-> there are plenty of files generated by "make check" that would've not
->
-> been generated if "enable-gcov" hadn't been chosen.) However, the
->
-> last command complains about some missing files related to FP
->
-So your failure mode is no report is generated at all? It's working for
->
-me here.
-Alex, no report is generated for my test setups - in fact, "make 
-coverage-report" even says that it explicitly deletes what appears to be the 
-main coverage report html file).
-
-This is the terminal output of an unsuccessful executions of "make 
-coverage-report" for recent ToT:
-
-~/Build/qemu-TOT-TEST$ make coverage-report
-make[1]: Entering directory '/home/user/Build/qemu-TOT-TEST/slirp'
-make[1]: Nothing to be done for 'all'.
-make[1]: Leaving directory '/home/user/Build/qemu-TOT-TEST/slirp'
-        CHK version_gen.h
-  GEN     coverage-report.html
-Traceback (most recent call last):
-  File "/usr/bin/gcovr", line 1970, in <module>
-    print_html_report(covdata, options.html_details)
-  File "/usr/bin/gcovr", line 1473, in print_html_report
-    INPUT = open(data['FILENAME'], 'r')
-IOError: [Errno 2] No such file or directory: 'wrap.inc.c'
-Makefile:1048: recipe for target 
-'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html' failed
-make: *** 
-[/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html] Error 1
-make: *** Deleting file 
-'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html'
-
-This instance is executed in QEMU 3.0 source tree: (so, it looks the problem 
-existed for quite some time)
-
-~/Build/qemu-3.0$ make coverage-report
-        CHK version_gen.h
-  GEN     coverage-report.html
-Traceback (most recent call last):
-  File "/usr/bin/gcovr", line 1970, in <module>
-    print_html_report(covdata, options.html_details)
-  File "/usr/bin/gcovr", line 1473, in print_html_report
-    INPUT = open(data['FILENAME'], 'r')
-IOError: [Errno 2] No such file or directory: 
-'/home/user/Build/qemu-3.0/target/openrisc/decode.inc.c'
-Makefile:992: recipe for target 
-'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html' failed
-make: *** [/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html] 
-Error 1
-make: *** Deleting file 
-'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html'
-
-Fond regards,
-Aleksandar
-
-
->
-Alex Bennée
-
->
-> #./configure --enable-gcov
->
-> #make
->
-> #make check
->
-> #make coverage-report
->
->
->
-> It seems that first three commands execute as expected. (For example,
->
-> there are plenty of files generated by "make check" that would've not
->
-> been generated if "enable-gcov" hadn't been chosen.) However, the
->
-> last command complains about some missing files related to FP
->
-So your failure mode is no report is generated at all? It's working for
->
-me here.
-Another piece of info:
-
-~/Build/qemu-TOT-TEST$ gcov --version
-gcov (Ubuntu 5.5.0-12ubuntu1~16.04) 5.5.0 20171010
-Copyright (C) 2015 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.
-There is NO warranty; not even for MERCHANTABILITY or 
-FITNESS FOR A PARTICULAR PURPOSE.
-
-:~/Build/qemu-TOT-TEST$ gcc --version
-gcc (Ubuntu 7.2.0-1ubuntu1~16.04) 7.2.0
-Copyright (C) 2017 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-
-
-
-Alex, no report is generated for my test setups - in fact, "make 
-coverage-report" even says that it explicitly deletes what appears to be the 
-main coverage report html file).
-
-This is the terminal output of an unsuccessful executions of "make 
-coverage-report" for recent ToT:
-
-~/Build/qemu-TOT-TEST$ make coverage-report
-make[1]: Entering directory '/home/user/Build/qemu-TOT-TEST/slirp'
-make[1]: Nothing to be done for 'all'.
-make[1]: Leaving directory '/home/user/Build/qemu-TOT-TEST/slirp'
-        CHK version_gen.h
-  GEN     coverage-report.html
-Traceback (most recent call last):
-  File "/usr/bin/gcovr", line 1970, in <module>
-    print_html_report(covdata, options.html_details)
-  File "/usr/bin/gcovr", line 1473, in print_html_report
-    INPUT = open(data['FILENAME'], 'r')
-IOError: [Errno 2] No such file or directory: 'wrap.inc.c'
-Makefile:1048: recipe for target 
-'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html' failed
-make: *** 
-[/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html] Error 1
-make: *** Deleting file 
-'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html'
-
-This instance is executed in QEMU 3.0 source tree: (so, it looks the problem 
-existed for quite some time)
-
-~/Build/qemu-3.0$ make coverage-report
-        CHK version_gen.h
-  GEN     coverage-report.html
-Traceback (most recent call last):
-  File "/usr/bin/gcovr", line 1970, in <module>
-    print_html_report(covdata, options.html_details)
-  File "/usr/bin/gcovr", line 1473, in print_html_report
-    INPUT = open(data['FILENAME'], 'r')
-IOError: [Errno 2] No such file or directory: 
-'/home/user/Build/qemu-3.0/target/openrisc/decode.inc.c'
-Makefile:992: recipe for target 
-'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html' failed
-make: *** [/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html] 
-Error 1
-make: *** Deleting file 
-'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html'
-
-Fond regards,
-Aleksandar
-
-
->
-Alex Bennée
-
->
-> #./configure --enable-gcov
->
-> #make
->
-> #make check
->
-> #make coverage-report
->
->
->
-> It seems that first three commands execute as expected. (For example,
->
-> there are plenty of files generated by "make check" that would've not
->
-> been generated if "enable-gcov" hadn't been chosen.) However, the
->
-> last command complains about some missing files related to FP
->
-So your failure mode is no report is generated at all? It's working for
->
-me here.
-Alex, here is the thing:
-
-Seeing that my gcovr is relatively old (2014) 3.2 version, I upgraded it from 
-git repo to the most recent 4.1 (actually, to a dev version, from the very tip 
-of the tree), and "make coverage-report" started generating coverage reports. 
-It did emit some error messages (totally different than previous), but still it 
-did not stop like it used to do with gcovr 3.2.
-
-Perhaps you would want to add some gcov/gcovr minimal version info in our docs. 
-(or at least a statement "this was tested with such and such gcc, gcov and 
-gcovr", etc.?)
-
-Coverage report looked fine at first glance, but it a kind of disappointed me 
-when I digged deeper into its content - for example, it shows very low coverage 
-for our FP code (softfloat), while, in fact, we know that "make check" contains 
-detailed tests on FP functionalities. But this is most likely a separate 
-problem of a very different nature, perhaps the issue of separate git repo for 
-FP tests (testfloat) that our FP tests use as a mid-layer.
-
-I'll try how everything works with my test examples, and will let you know.
-
-Your help is greatly appreciated,
-Aleksandar
-
-Fond regards,
-Aleksandar
-
-
->
-Alex Bennée
-
-Aleksandar Markovic <address@hidden> writes:
-
->
->> #./configure --enable-gcov
->
->> #make
->
->> #make check
->
->> #make coverage-report
->
->>
->
->> It seems that first three commands execute as expected. (For example,
->
->> there are plenty of files generated by "make check" that would've not
->
->> been generated if "enable-gcov" hadn't been chosen.) However, the
->
->> last command complains about some missing files related to FP
->
->
-> So your failure mode is no report is generated at all? It's working for
->
-> me here.
->
->
-Alex, here is the thing:
->
->
-Seeing that my gcovr is relatively old (2014) 3.2 version, I upgraded it from
->
-git repo to the most recent 4.1 (actually, to a dev version, from the very
->
-tip of the tree), and "make coverage-report" started generating coverage
->
-reports. It did emit some error messages (totally different than previous),
->
-but still it did not stop like it used to do with gcovr 3.2.
->
->
-Perhaps you would want to add some gcov/gcovr minimal version info in our
->
-docs. (or at least a statement "this was tested with such and such gcc, gcov
->
-and gcovr", etc.?)
->
->
-Coverage report looked fine at first glance, but it a kind of
->
-disappointed me when I digged deeper into its content - for example,
->
-it shows very low coverage for our FP code (softfloat), while, in
->
-fact, we know that "make check" contains detailed tests on FP
->
-functionalities. But this is most likely a separate problem of a very
->
-different nature, perhaps the issue of separate git repo for FP tests
->
-(testfloat) that our FP tests use as a mid-layer.
-I get:
-
-68.6 %  2593 / 3782     62.2 %  1690 / 2718
-
-Which is not bad considering we don't exercise the 80 and 128 bit
-softfloat code at all (which is not shared by the re-factored 16/32/64
-bit code).
-
->
->
-I'll try how everything works with my test examples, and will let you know.
->
->
-Your help is greatly appreciated,
->
-Aleksandar
->
->
-Fond regards,
->
-Aleksandar
->
->
->
-> Alex Bennée
---
-Alex Bennée
-
->
-> it shows very low coverage for our FP code (softfloat), while, in
->
-> fact, we know that "make check" contains detailed tests on FP
->
-> functionalities. But this is most likely a separate problem of a very
->
-> different nature, perhaps the issue of separate git repo for FP tests
->
-> (testfloat) that our FP tests use as a mid-layer.
->
->
-I get:
->
->
-68.6 %  2593 / 3782     62.2 %  1690 / 2718
->
-I would expect that kind of result too.
-
-However, I get:
-
-File:   fpu/softfloat.c                 Lines:  8       3334    0.2 %
-Date:   2019-08-05 19:56:58             Branches:       3       2376    0.1 %
-
-:(
-
-OK, I'll try to figure that out, and most likely I could live with it if it is 
-an isolated problem.
-
-Thank you for your assistance in this matter,
-Aleksandar
-
->
-Which is not bad considering we don't exercise the 80 and 128 bit
->
-softfloat code at all (which is not shared by the re-factored 16/32/64
->
-bit code).
->
->
-Alex Bennée
-
->
-> it shows very low coverage for our FP code (softfloat), while, in
->
-> fact, we know that "make check" contains detailed tests on FP
->
-> functionalities. But this is most likely a separate problem of a very
->
-> different nature, perhaps the issue of separate git repo for FP tests
->
-> (testfloat) that our FP tests use as a mid-layer.
->
->
-I get:
->
->
-68.6 %  2593 / 3782     62.2 %  1690 / 2718
->
-This problem is solved too. (and it is my fault)
-
-I worked with multiple versions of QEMU, and my previous low-coverage results 
-were for QEMU 3.0, and for that version the directory tests/fp did not even 
-exist. :D (<blush>)
-
-For QEMU ToT, I get now:
-
-fpu/softfloat.c         
-        68.8 %  2592 / 3770     62.3 %  1693 / 2718
-
-which is identical for all intents and purposes to your result.
-
-Yours cordially,
-Aleksandar
-
diff --git a/results/classifier/005/device/57195159 b/results/classifier/005/device/57195159
deleted file mode 100644
index bfe64b27..00000000
--- a/results/classifier/005/device/57195159
+++ /dev/null
@@ -1,323 +0,0 @@
-device: 0.877
-other: 0.868
-graphic: 0.861
-instruction: 0.833
-semantic: 0.794
-assembly: 0.782
-boot: 0.781
-KVM: 0.752
-socket: 0.750
-network: 0.687
-mistranslation: 0.665
-vnc: 0.626
-
-[BUG Report] Got a use-after-free error while start arm64 VM with lots of pci controllers
-
-Hi,
-
-We got a use-after-free report in our Euler Robot Test, it is can be reproduced 
-quite easily,
-It can be reproduced by start VM with lots of pci controller and virtio-scsi 
-devices.
-You can find the full qemu log from attachment.
-We have analyzed the log and got the rough process how it happened, but don't 
-know how to fix it.
-
-Could anyone help to fix it ?
-
-The key message shows bellow:
-har device redirected to /dev/pts/1 (label charserial0)
-==1517174==WARNING: ASan doesn't fully support makecontext/swapcontext 
-functions and may produce false positives in some cases!
-=================================================================
-==1517174==ERROR: AddressSanitizer: heap-use-after-free on address 
-0xfffc31a002a0 at pc 0xaaad73e1f668 bp 0xfffc319fddb0 sp 0xfffc319fddd0
-READ of size 8 at 0xfffc31a002a0 thread T1
-    #0 0xaaad73e1f667 in memory_region_unref /home/qemu/memory.c:1771
-    #1 0xaaad73e1f667 in flatview_destroy /home/qemu/memory.c:291
-    #2 0xaaad74adc85b in call_rcu_thread util/rcu.c:283
-    #3 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
-    #4 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
-    #5 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
-
-0xfffc31a002a0 is located 544 bytes inside of 1440-byte region 
-[0xfffc31a00080,0xfffc31a00620)
-freed by thread T37 (CPU 0/KVM) here:
-    #0 0xfffc3c102e23 in free (/lib64/libasan.so.4+0xd2e23)
-    #1 0xfffc3bbc729f in g_free (/lib64/libglib-2.0.so.0+0x5729f)
-    #2 0xaaad745cce03 in pci_bridge_update_mappings hw/pci/pci_bridge.c:245
-    #3 0xaaad745ccf33 in pci_bridge_write_config hw/pci/pci_bridge.c:271
-    #4 0xaaad745ba867 in pci_bridge_dev_write_config 
-hw/pci-bridge/pci_bridge_dev.c:153
-    #5 0xaaad745d6013 in pci_host_config_write_common hw/pci/pci_host.c:81
-    #6 0xaaad73e2346f in memory_region_write_accessor /home/qemu/memory.c:483
-    #7 0xaaad73e1d9ff in access_with_adjusted_size /home/qemu/memory.c:544
-    #8 0xaaad73e28d1f in memory_region_dispatch_write /home/qemu/memory.c:1482
-    #9 0xaaad73d7274f in flatview_write_continue /home/qemu/exec.c:3167
-    #10 0xaaad73d72a53 in flatview_write /home/qemu/exec.c:3207
-    #11 0xaaad73d7c8c3 in address_space_write /home/qemu/exec.c:3297
-    #12 0xaaad73e5059b in kvm_cpu_exec /home/qemu/accel/kvm/kvm-all.c:2386
-    #13 0xaaad73e07ac7 in qemu_kvm_cpu_thread_fn /home/qemu/cpus.c:1246
-    #14 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
-    #15 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
-    #16 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
-
-previously allocated by thread T0 here:
-    #0 0xfffc3c1031cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
-    #1 0xfffc3bbc7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
-    #2 0xaaad745ccb57 in pci_bridge_region_init hw/pci/pci_bridge.c:188
-    #3 0xaaad745cd8cb in pci_bridge_initfn hw/pci/pci_bridge.c:385
-    #4 0xaaad745baaf3 in pci_bridge_dev_realize 
-hw/pci-bridge/pci_bridge_dev.c:64
-    #5 0xaaad745cacd7 in pci_qdev_realize hw/pci/pci.c:2095
-    #6 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
-    #7 0xaaad7485ed23 in property_set_bool qom/object.c:2102
-    #8 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
-    #9 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
-    #10 0xaaad742a53b7 in qdev_device_add /home/qemu/qdev-monitor.c:675
-    #11 0xaaad742a9c7b in device_init_func /home/qemu/vl.c:2074
-    #12 0xaaad74ad4d33 in qemu_opts_foreach util/qemu-option.c:1170
-    #13 0xaaad73d60c17 in main /home/qemu/vl.c:4313
-    #14 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
-    #15 0xaaad73d6db33  
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
-
-Thread T1 created by T0 here:
-    #0 0xfffc3c068f6f in __interceptor_pthread_create 
-(/lib64/libasan.so.4+0x38f6f)
-    #1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
-    #2 0xaaad74adc6a7 in rcu_init_complete util/rcu.c:326
-    #3 0xaaad74bab2a7 in __libc_csu_init 
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x17cb2a7)
-    #4 0xfffc39ff0b47 in __libc_start_main (/lib64/libc.so.6+0x20b47)
-    #5 0xaaad73d6db33  (/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
-
-Thread T37 (CPU 0/KVM) created by T0 here:
-    #0 0xfffc3c068f6f in __interceptor_pthread_create 
-(/lib64/libasan.so.4+0x38f6f)
-    #1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
-    #2 0xaaad73e09b0f in qemu_dummy_start_vcpu /home/qemu/cpus.c:2045
-    #3 0xaaad73e09b0f in qemu_init_vcpu /home/qemu/cpus.c:2077
-    #4 0xaaad740d36b7 in arm_cpu_realizefn /home/qemu/target/arm/cpu.c:1712
-    #5 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
-    #6 0xaaad7485ed23 in property_set_bool qom/object.c:2102
-    #7 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
-    #8 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
-    #9 0xaaad73fe3e67 in machvirt_init /home/qemu/hw/arm/virt.c:1682
-    #10 0xaaad743acfc7 in machine_run_board_init hw/core/machine.c:1077
-    #11 0xaaad73d60b73 in main /home/qemu/vl.c:4292
-    #12 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
-    #13 0xaaad73d6db33  
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
-
-SUMMARY: AddressSanitizer: heap-use-after-free /home/qemu/memory.c:1771 in 
-memory_region_unref
-
-Thanks
-use-after-free-qemu.log
-Description:
-Text document
-
-Cc: address@hidden
-
-On 1/17/2020 4:18 PM, Pan Nengyuan wrote:
->
-Hi,
->
->
-We got a use-after-free report in our Euler Robot Test, it is can be
->
-reproduced quite easily,
->
-It can be reproduced by start VM with lots of pci controller and virtio-scsi
->
-devices.
->
-You can find the full qemu log from attachment.
->
-We have analyzed the log and got the rough process how it happened, but don't
->
-know how to fix it.
->
->
-Could anyone help to fix it ?
->
->
-The key message shows bellow:
->
-har device redirected to /dev/pts/1 (label charserial0)
->
-==1517174==WARNING: ASan doesn't fully support makecontext/swapcontext
->
-functions and may produce false positives in some cases!
->
-=================================================================
->
-==1517174==ERROR: AddressSanitizer: heap-use-after-free on address
->
-0xfffc31a002a0 at pc 0xaaad73e1f668 bp 0xfffc319fddb0 sp 0xfffc319fddd0
->
-READ of size 8 at 0xfffc31a002a0 thread T1
->
-#0 0xaaad73e1f667 in memory_region_unref /home/qemu/memory.c:1771
->
-#1 0xaaad73e1f667 in flatview_destroy /home/qemu/memory.c:291
->
-#2 0xaaad74adc85b in call_rcu_thread util/rcu.c:283
->
-#3 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
->
-#4 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
->
-#5 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
->
->
-0xfffc31a002a0 is located 544 bytes inside of 1440-byte region
->
-[0xfffc31a00080,0xfffc31a00620)
->
-freed by thread T37 (CPU 0/KVM) here:
->
-#0 0xfffc3c102e23 in free (/lib64/libasan.so.4+0xd2e23)
->
-#1 0xfffc3bbc729f in g_free (/lib64/libglib-2.0.so.0+0x5729f)
->
-#2 0xaaad745cce03 in pci_bridge_update_mappings hw/pci/pci_bridge.c:245
->
-#3 0xaaad745ccf33 in pci_bridge_write_config hw/pci/pci_bridge.c:271
->
-#4 0xaaad745ba867 in pci_bridge_dev_write_config
->
-hw/pci-bridge/pci_bridge_dev.c:153
->
-#5 0xaaad745d6013 in pci_host_config_write_common hw/pci/pci_host.c:81
->
-#6 0xaaad73e2346f in memory_region_write_accessor /home/qemu/memory.c:483
->
-#7 0xaaad73e1d9ff in access_with_adjusted_size /home/qemu/memory.c:544
->
-#8 0xaaad73e28d1f in memory_region_dispatch_write /home/qemu/memory.c:1482
->
-#9 0xaaad73d7274f in flatview_write_continue /home/qemu/exec.c:3167
->
-#10 0xaaad73d72a53 in flatview_write /home/qemu/exec.c:3207
->
-#11 0xaaad73d7c8c3 in address_space_write /home/qemu/exec.c:3297
->
-#12 0xaaad73e5059b in kvm_cpu_exec /home/qemu/accel/kvm/kvm-all.c:2386
->
-#13 0xaaad73e07ac7 in qemu_kvm_cpu_thread_fn /home/qemu/cpus.c:1246
->
-#14 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
->
-#15 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
->
-#16 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
->
->
-previously allocated by thread T0 here:
->
-#0 0xfffc3c1031cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
->
-#1 0xfffc3bbc7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
->
-#2 0xaaad745ccb57 in pci_bridge_region_init hw/pci/pci_bridge.c:188
->
-#3 0xaaad745cd8cb in pci_bridge_initfn hw/pci/pci_bridge.c:385
->
-#4 0xaaad745baaf3 in pci_bridge_dev_realize
->
-hw/pci-bridge/pci_bridge_dev.c:64
->
-#5 0xaaad745cacd7 in pci_qdev_realize hw/pci/pci.c:2095
->
-#6 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
->
-#7 0xaaad7485ed23 in property_set_bool qom/object.c:2102
->
-#8 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
->
-#9 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
->
-#10 0xaaad742a53b7 in qdev_device_add /home/qemu/qdev-monitor.c:675
->
-#11 0xaaad742a9c7b in device_init_func /home/qemu/vl.c:2074
->
-#12 0xaaad74ad4d33 in qemu_opts_foreach util/qemu-option.c:1170
->
-#13 0xaaad73d60c17 in main /home/qemu/vl.c:4313
->
-#14 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
->
-#15 0xaaad73d6db33
->
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
->
->
-Thread T1 created by T0 here:
->
-#0 0xfffc3c068f6f in __interceptor_pthread_create
->
-(/lib64/libasan.so.4+0x38f6f)
->
-#1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
->
-#2 0xaaad74adc6a7 in rcu_init_complete util/rcu.c:326
->
-#3 0xaaad74bab2a7 in __libc_csu_init
->
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x17cb2a7)
->
-#4 0xfffc39ff0b47 in __libc_start_main (/lib64/libc.so.6+0x20b47)
->
-#5 0xaaad73d6db33
->
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
->
->
-Thread T37 (CPU 0/KVM) created by T0 here:
->
-#0 0xfffc3c068f6f in __interceptor_pthread_create
->
-(/lib64/libasan.so.4+0x38f6f)
->
-#1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
->
-#2 0xaaad73e09b0f in qemu_dummy_start_vcpu /home/qemu/cpus.c:2045
->
-#3 0xaaad73e09b0f in qemu_init_vcpu /home/qemu/cpus.c:2077
->
-#4 0xaaad740d36b7 in arm_cpu_realizefn /home/qemu/target/arm/cpu.c:1712
->
-#5 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
->
-#6 0xaaad7485ed23 in property_set_bool qom/object.c:2102
->
-#7 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
->
-#8 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
->
-#9 0xaaad73fe3e67 in machvirt_init /home/qemu/hw/arm/virt.c:1682
->
-#10 0xaaad743acfc7 in machine_run_board_init hw/core/machine.c:1077
->
-#11 0xaaad73d60b73 in main /home/qemu/vl.c:4292
->
-#12 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
->
-#13 0xaaad73d6db33
->
-(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
->
->
-SUMMARY: AddressSanitizer: heap-use-after-free /home/qemu/memory.c:1771 in
->
-memory_region_unref
->
->
-Thanks
->
-use-after-free-qemu.log
-Description:
-Text document
-
diff --git a/results/classifier/005/device/57231878 b/results/classifier/005/device/57231878
deleted file mode 100644
index d02eeac3..00000000
--- a/results/classifier/005/device/57231878
+++ /dev/null
@@ -1,250 +0,0 @@
-device: 0.818
-other: 0.788
-semantic: 0.774
-graphic: 0.751
-assembly: 0.745
-mistranslation: 0.719
-KVM: 0.708
-instruction: 0.661
-network: 0.659
-vnc: 0.640
-socket: 0.624
-boot: 0.609
-
-[Qemu-devel] [BUG] qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
-
-Hello all,
-I wanted to submit a bug report in the tracker, but it seem to require
-an Ubuntu One account, which I'm having trouble with, so I'll just
-give it here and hopefully somebody can make use of it.  The issue
-seems to be in an experimental format, so it's likely not very
-consequential anyway.
-
-For the sake of anyone else simply googling for a workaround, I'll
-just paste in the (cleaned up) brief IRC conversation about my issue
-from the official channel:
-<quy> I'm using QEMU version 2.12.0 on an x86_64 host (Arch Linux,
-Kernel v4.17.2), and I'm trying to create an x86_64 virtual machine
-(FreeBSD-11.1).  The VM always aborts at the same point in the
-installation (downloading 'ports.tgz') with the following error
-message:
-"qemu-system-x86_64: /build/qemu/src/qemu-2.12.0/block/qed.c:1197:
-qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
-zsh: abort (core dumped)  qemu-system-x86_64 -smp 2 -m 4096
--enable-kvm -hda freebsd/freebsd.qed -devic"
-The commands I ran to create the machine are as follows:
-"qemu-img create -f qed freebsd/freebsd.qed 16G"
-"qemu-system-x86_64 -smp 2 -m 4096 -enable-kvm -hda
-freebsd/freebsd.qed -device e1000,netdev=net0 -netdev user,id=net0
--cdrom FreeBSD-11.1-RELEASE-amd64-bootonly.iso -boot order=d"
-I tried adding logging options with the -d flag, but I didn't get
-anything that seemed relevant, since I'm not sure what to look for.
-<stsquad> ohh what's a qed device?
-<stsquad> quy: it might be a workaround to use a qcow2 image for now
-<stsquad> ahh the wiki has a statement "It is not recommended to use
-QED for any new images. "
-<danpb> 'qed' was an experimental disk image format created by IBM
-before qcow2 v3 came along
-<danpb> honestly nothing should ever use  QED these days
-<danpb> the good ideas from QED became  qcow2v3
-<stsquad> danpb: sounds like we should put a warning on the option to
-remind users of that fact
-<danpb> quy: sounds like qed driver is simply broken - please do file
-a bug against qemu bug tracker
-<danpb> quy: but you should also really switch to qcow2
-<quy> I see; some people need to update their wikis then.  I don't
-remember where which guide I read when I first learned what little
-QEMU I know, but I remember it specifically remember it saying QED was
-the newest and most optimal format.
-<stsquad> quy: we can only be responsible for our own wiki I'm afraid...
-<danpb> if you remember where you saw that please let us know so we
-can try to get it fixed
-<quy> Thank you very much for the info; I will switch to QCOW.
-Unfortunately, I'm not sure if I will be able to file any bug reports
-in the tracker as I can't seem to log Launchpad, which it seems to
-require.
-<danpb> quy:  an email to the mailing list would suffice too if you
-can't deal with launchpad
-<danpb> kwolf: ^^^ in case you're interested in possible QED
-assertions from 2.12
-
-If any more info is needed, feel free to email me; I'm not actually
-subscribed to this list though.
-Thank you,
-Quytelda Kahja
-
-CC Qemu Block; looks like QED is a bit busted.
-
-On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
->
-Hello all,
->
-I wanted to submit a bug report in the tracker, but it seem to require
->
-an Ubuntu One account, which I'm having trouble with, so I'll just
->
-give it here and hopefully somebody can make use of it.  The issue
->
-seems to be in an experimental format, so it's likely not very
->
-consequential anyway.
->
->
-For the sake of anyone else simply googling for a workaround, I'll
->
-just paste in the (cleaned up) brief IRC conversation about my issue
->
-from the official channel:
->
-<quy> I'm using QEMU version 2.12.0 on an x86_64 host (Arch Linux,
->
-Kernel v4.17.2), and I'm trying to create an x86_64 virtual machine
->
-(FreeBSD-11.1).  The VM always aborts at the same point in the
->
-installation (downloading 'ports.tgz') with the following error
->
-message:
->
-"qemu-system-x86_64: /build/qemu/src/qemu-2.12.0/block/qed.c:1197:
->
-qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
->
-zsh: abort (core dumped)  qemu-system-x86_64 -smp 2 -m 4096
->
--enable-kvm -hda freebsd/freebsd.qed -devic"
->
-The commands I ran to create the machine are as follows:
->
-"qemu-img create -f qed freebsd/freebsd.qed 16G"
->
-"qemu-system-x86_64 -smp 2 -m 4096 -enable-kvm -hda
->
-freebsd/freebsd.qed -device e1000,netdev=net0 -netdev user,id=net0
->
--cdrom FreeBSD-11.1-RELEASE-amd64-bootonly.iso -boot order=d"
->
-I tried adding logging options with the -d flag, but I didn't get
->
-anything that seemed relevant, since I'm not sure what to look for.
->
-<stsquad> ohh what's a qed device?
->
-<stsquad> quy: it might be a workaround to use a qcow2 image for now
->
-<stsquad> ahh the wiki has a statement "It is not recommended to use
->
-QED for any new images. "
->
-<danpb> 'qed' was an experimental disk image format created by IBM
->
-before qcow2 v3 came along
->
-<danpb> honestly nothing should ever use  QED these days
->
-<danpb> the good ideas from QED became  qcow2v3
->
-<stsquad> danpb: sounds like we should put a warning on the option to
->
-remind users of that fact
->
-<danpb> quy: sounds like qed driver is simply broken - please do file
->
-a bug against qemu bug tracker
->
-<danpb> quy: but you should also really switch to qcow2
->
-<quy> I see; some people need to update their wikis then.  I don't
->
-remember where which guide I read when I first learned what little
->
-QEMU I know, but I remember it specifically remember it saying QED was
->
-the newest and most optimal format.
->
-<stsquad> quy: we can only be responsible for our own wiki I'm afraid...
->
-<danpb> if you remember where you saw that please let us know so we
->
-can try to get it fixed
->
-<quy> Thank you very much for the info; I will switch to QCOW.
->
-Unfortunately, I'm not sure if I will be able to file any bug reports
->
-in the tracker as I can't seem to log Launchpad, which it seems to
->
-require.
->
-<danpb> quy:  an email to the mailing list would suffice too if you
->
-can't deal with launchpad
->
-<danpb> kwolf: ^^^ in case you're interested in possible QED
->
-assertions from 2.12
->
->
-If any more info is needed, feel free to email me; I'm not actually
->
-subscribed to this list though.
->
-Thank you,
->
-Quytelda Kahja
->
-
-On 06/29/2018 03:07 PM, John Snow wrote:
-CC Qemu Block; looks like QED is a bit busted.
-
-On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
-Hello all,
-I wanted to submit a bug report in the tracker, but it seem to require
-an Ubuntu One account, which I'm having trouble with, so I'll just
-give it here and hopefully somebody can make use of it.  The issue
-seems to be in an experimental format, so it's likely not very
-consequential anyway.
-Analysis in another thread may be relevant:
-https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg08963.html
---
-Eric Blake, Principal Software Engineer
-Red Hat, Inc.           +1-919-301-3266
-Virtualization:  qemu.org | libvirt.org
-
-Am 29.06.2018 um 22:16 hat Eric Blake geschrieben:
->
-On 06/29/2018 03:07 PM, John Snow wrote:
->
-> CC Qemu Block; looks like QED is a bit busted.
->
->
->
-> On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
->
-> > Hello all,
->
-> > I wanted to submit a bug report in the tracker, but it seem to require
->
-> > an Ubuntu One account, which I'm having trouble with, so I'll just
->
-> > give it here and hopefully somebody can make use of it.  The issue
->
-> > seems to be in an experimental format, so it's likely not very
->
-> > consequential anyway.
->
->
-Analysis in another thread may be relevant:
->
->
-https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg08963.html
-The assertion there was:
-
-qemu-system-x86_64: block.c:3434: bdrv_replace_node: Assertion 
-`!atomic_read(&to->in_flight)' failed.
-
-Which quite clearly pointed to a drain bug. This one, however, doesn't
-seem to be related to drain, so I think it's probably a different bug.
-
-Kevin
-
diff --git a/results/classifier/005/device/67821138 b/results/classifier/005/device/67821138
deleted file mode 100644
index 4201fc49..00000000
--- a/results/classifier/005/device/67821138
+++ /dev/null
@@ -1,207 +0,0 @@
-device: 0.916
-assembly: 0.915
-boot: 0.881
-other: 0.853
-semantic: 0.843
-graphic: 0.826
-KVM: 0.822
-instruction: 0.821
-mistranslation: 0.768
-vnc: 0.734
-network: 0.718
-socket: 0.699
-
-[BUG, RFC] Base node is in RW after making external snapshot
-
-Hi everyone,
-
-When making an external snapshot, we end up in a situation when 2 block
-graph nodes related to the same image file (format and storage nodes)
-have different RO flags set on them.
-
-E.g.
-
-# ls -la /proc/PID/fd
-lrwx------ 1 root qemu 64 Apr 24 20:14 12 -> /path/to/harddisk.hdd
-
-# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
---pretty | egrep '"node-name"|"ro"'
-      "ro": false,
-      "node-name": "libvirt-1-format",
-      "ro": false,
-      "node-name": "libvirt-1-storage",
-
-# virsh snapshot-create-as VM --name snap --disk-only
-Domain snapshot snap created
-
-# ls -la /proc/PID/fd
-lr-x------ 1 root qemu 64 Apr 24 20:14 134 -> /path/to/harddisk.hdd
-lrwx------ 1 root qemu 64 Apr 24 20:14 135 -> /path/to/harddisk.snap
-
-# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
---pretty | egrep '"node-name"|"ro"'
-      "ro": false,
-      "node-name": "libvirt-2-format",
-      "ro": false,
-      "node-name": "libvirt-2-storage",
-      "ro": true,
-      "node-name": "libvirt-1-format",
-      "ro": false,                        <--------------
-      "node-name": "libvirt-1-storage",
-
-File descriptor has been reopened in RO, but "libvirt-1-storage" node
-still has RW permissions set.
-
-I'm wondering it this a bug or this is intended?  Looks like a bug to
-me, although I see that some iotests (e.g. 273) expect 2 nodes related
-to the same image file to have different RO flags.
-
-bdrv_reopen_set_read_only()
-  bdrv_reopen()
-    bdrv_reopen_queue()
-      bdrv_reopen_queue_child()
-    bdrv_reopen_multiple()
-      bdrv_list_refresh_perms()
-        bdrv_topological_dfs()
-        bdrv_do_refresh_perms()
-      bdrv_reopen_commit()
-
-In the stack above bdrv_reopen_set_read_only() is only being called for
-the parent (libvirt-1-format) node.  There're 2 lists: BDSs from
-refresh_list are used by bdrv_drv_set_perm and this leads to actual
-reopen with RO of the file descriptor.  And then there's reopen queue
-bs_queue -- BDSs from this queue get their parameters updated.  While
-refresh_list ends up having the whole subtree (including children, this
-is done in bdrv_topological_dfs()) bs_queue only has the parent.  And
-that is because storage (child) node's (bs->inherits_from == NULL), so
-bdrv_reopen_queue_child() never adds it to the queue.  Could it be the
-source of this bug?
-
-Anyway, would greatly appreciate a clarification.
-
-Andrey
-
-On 4/24/24 21:00, Andrey Drobyshev wrote:
->
-Hi everyone,
->
->
-When making an external snapshot, we end up in a situation when 2 block
->
-graph nodes related to the same image file (format and storage nodes)
->
-have different RO flags set on them.
->
->
-E.g.
->
->
-# ls -la /proc/PID/fd
->
-lrwx------ 1 root qemu 64 Apr 24 20:14 12 -> /path/to/harddisk.hdd
->
->
-# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
->
---pretty | egrep '"node-name"|"ro"'
->
-"ro": false,
->
-"node-name": "libvirt-1-format",
->
-"ro": false,
->
-"node-name": "libvirt-1-storage",
->
->
-# virsh snapshot-create-as VM --name snap --disk-only
->
-Domain snapshot snap created
->
->
-# ls -la /proc/PID/fd
->
-lr-x------ 1 root qemu 64 Apr 24 20:14 134 -> /path/to/harddisk.hdd
->
-lrwx------ 1 root qemu 64 Apr 24 20:14 135 -> /path/to/harddisk.snap
->
->
-# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
->
---pretty | egrep '"node-name"|"ro"'
->
-"ro": false,
->
-"node-name": "libvirt-2-format",
->
-"ro": false,
->
-"node-name": "libvirt-2-storage",
->
-"ro": true,
->
-"node-name": "libvirt-1-format",
->
-"ro": false,                        <--------------
->
-"node-name": "libvirt-1-storage",
->
->
-File descriptor has been reopened in RO, but "libvirt-1-storage" node
->
-still has RW permissions set.
->
->
-I'm wondering it this a bug or this is intended?  Looks like a bug to
->
-me, although I see that some iotests (e.g. 273) expect 2 nodes related
->
-to the same image file to have different RO flags.
->
->
-bdrv_reopen_set_read_only()
->
-bdrv_reopen()
->
-bdrv_reopen_queue()
->
-bdrv_reopen_queue_child()
->
-bdrv_reopen_multiple()
->
-bdrv_list_refresh_perms()
->
-bdrv_topological_dfs()
->
-bdrv_do_refresh_perms()
->
-bdrv_reopen_commit()
->
->
-In the stack above bdrv_reopen_set_read_only() is only being called for
->
-the parent (libvirt-1-format) node.  There're 2 lists: BDSs from
->
-refresh_list are used by bdrv_drv_set_perm and this leads to actual
->
-reopen with RO of the file descriptor.  And then there's reopen queue
->
-bs_queue -- BDSs from this queue get their parameters updated.  While
->
-refresh_list ends up having the whole subtree (including children, this
->
-is done in bdrv_topological_dfs()) bs_queue only has the parent.  And
->
-that is because storage (child) node's (bs->inherits_from == NULL), so
->
-bdrv_reopen_queue_child() never adds it to the queue.  Could it be the
->
-source of this bug?
->
->
-Anyway, would greatly appreciate a clarification.
->
->
-Andrey
-Friendly ping.  Could somebody confirm that it is a bug indeed?
-
diff --git a/results/classifier/005/device/99674399 b/results/classifier/005/device/99674399
deleted file mode 100644
index cbf3c703..00000000
--- a/results/classifier/005/device/99674399
+++ /dev/null
@@ -1,156 +0,0 @@
-device: 0.886
-other: 0.883
-instruction: 0.860
-mistranslation: 0.843
-assembly: 0.843
-semantic: 0.822
-boot: 0.822
-graphic: 0.794
-socket: 0.747
-network: 0.711
-KVM: 0.698
-vnc: 0.673
-
-[BUG] qemu crashes on assertion in cpu_asidx_from_attrs when cpu is in smm mode
-
-Hi all!
-
-First, I see this issue:
-https://gitlab.com/qemu-project/qemu/-/issues/1198
-. 
-where some kvm/hardware failure leads to guest crash, and finally to this 
-assertion:
-
-   cpu_asidx_from_attrs: Assertion `ret < cpu->num_ases && ret >= 0' failed.
-
-But in the ticket the talk is about the guest crash and fixing the kernel, not 
-about the final QEMU assertion (which definitely show that something should be 
-fixed in QEMU code too).
-
-
-We've faced same stack one time:
-
-(gdb) bt
-#0  raise () from /lib/x86_64-linux-gnu/libc.so.6
-#1  abort () from /lib/x86_64-linux-gnu/libc.so.6
-#2  ?? () from /lib/x86_64-linux-gnu/libc.so.6
-#3  __assert_fail () from /lib/x86_64-linux-gnu/libc.so.6
-#4  cpu_asidx_from_attrs  at ../hw/core/cpu-sysemu.c:76
-#5  cpu_memory_rw_debug  at ../softmmu/physmem.c:3529
-#6  x86_cpu_dump_state  at ../target/i386/cpu-dump.c:560
-#7  kvm_cpu_exec  at ../accel/kvm/kvm-all.c:3000
-#8  kvm_vcpu_thread_fn  at ../accel/kvm/kvm-accel-ops.c:51
-#9  qemu_thread_start  at ../util/qemu-thread-posix.c:505
-#10 start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
-#11 clone () from /lib/x86_64-linux-gnu/libc.so.6
-
-
-And what I see:
-
-static inline int x86_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs)
-{
-    return !!attrs.secure;
-}
-
-int cpu_asidx_from_attrs(CPUState *cpu, MemTxAttrs attrs)
-{
-    int ret = 0;
-
-    if (cpu->cc->sysemu_ops->asidx_from_attrs) {
-        ret = cpu->cc->sysemu_ops->asidx_from_attrs(cpu, attrs);
-        assert(ret < cpu->num_ases && ret >= 0);         <<<<<<<<<<<<<<<<<
-    }
-    return ret;
-}
-
-(gdb) p cpu->num_ases
-$3 = 1
-
-(gdb) fr 5
-#5  0x00005578c8814ba3 in cpu_memory_rw_debug (cpu=c...
-(gdb) p attrs
-$6 = {unspecified = 0, secure = 1, user = 0, memory = 0, requester_id = 0, 
-byte_swap = 0, target_tlb_bit0 = 0, target_tlb_bit1 = 0, target_tlb_bit2 = 0}
-
-so .secure is 1, therefore ret is 1, in the same time num_ases is 1 too and 
-assertion fails.
-
-
-
-Where is .secure from?
-
-static inline MemTxAttrs cpu_get_mem_attrs(CPUX86State *env)
-{
-    return ((MemTxAttrs) { .secure = (env->hflags & HF_SMM_MASK) != 0 });
-}
-
-Ok, it means we in SMM mode.
-
-
-
-On the other hand, it seems that num_ases seems to be always 1 for x86:
-
-vsementsov@vsementsov-lin:~/work/src/qemu/yc-7.2$ git grep 'num_ases = '
-cpu.c:    cpu->num_ases = 0;
-softmmu/cpus.c:        cpu->num_ases = 1;
-target/arm/cpu.c:        cs->num_ases = 3 + has_secure;
-target/arm/cpu.c:        cs->num_ases = 1 + has_secure;
-target/i386/tcg/sysemu/tcg-cpu.c:    cs->num_ases = 2;
-
-
-So, something is wrong around cpu->num_ases and x86_asidx_from_attrs() which 
-may return more in SMM mode.
-
-
-The stack starts in
-//7  0x00005578c882f539 in kvm_cpu_exec (cpu=cpu@entry=0x5578ca2eb340) at 
-../accel/kvm/kvm-all.c:3000
-    if (ret < 0) {
-        cpu_dump_state(cpu, stderr, CPU_DUMP_CODE);
-        vm_stop(RUN_STATE_INTERNAL_ERROR);
-    }
-
-So that was some kvm error, and we decided to call cpu_dump_state(). And it 
-crashes. cpu_dump_state() is also called from hmp_info_registers, so I can 
-reproduce the crash with a tiny patch to master (as only CPU_DUMP_CODE path 
-calls cpu_memory_rw_debug(), as it is in kvm_cpu_exec()):
-
-diff --git a/monitor/hmp-cmds-target.c b/monitor/hmp-cmds-target.c
-index ff01cf9d8d..dcf0189048 100644
---- a/monitor/hmp-cmds-target.c
-+++ b/monitor/hmp-cmds-target.c
-@@ -116,7 +116,7 @@ void hmp_info_registers(Monitor *mon, const QDict *qdict)
-         }
-
-         monitor_printf(mon, "\nCPU#%d\n", cs->cpu_index);
--        cpu_dump_state(cs, NULL, CPU_DUMP_FPU);
-+        cpu_dump_state(cs, NULL, CPU_DUMP_CODE);
-     }
- }
-
-
-Than run
-
-yes "info registers" | ./build/qemu-system-x86_64 -accel kvm -monitor stdio \
-   -global driver=cfi.pflash01,property=secure,value=on \
-   -blockdev "{'driver': 'file', 'filename': 
-'/usr/share/OVMF/OVMF_CODE_4M.secboot.fd', 'node-name': 'ovmf-code', 'read-only': 
-true}" \
-   -blockdev "{'driver': 'file', 'filename': '/usr/share/OVMF/OVMF_VARS_4M.fd', 
-'node-name': 'ovmf-vars', 'read-only': true}" \
-   -machine q35,smm=on,pflash0=ovmf-code,pflash1=ovmf-vars -m 2G -nodefaults
-
-And after some time (less than 20 seconds for me) it leads to
-
-qemu-system-x86_64: ../hw/core/cpu-sysemu.c:76: cpu_asidx_from_attrs: Assertion `ret < 
-cpu->num_ases && ret >= 0' failed.
-Aborted (core dumped)
-
-
-I've no idea how to correctly fix this bug, but I hope that my reproducer and 
-investigation will help a bit.
-
---
-Best regards,
-Vladimir
-
diff --git a/results/classifier/005/graphic/22219210 b/results/classifier/005/graphic/22219210
deleted file mode 100644
index f0533149..00000000
--- a/results/classifier/005/graphic/22219210
+++ /dev/null
@@ -1,51 +0,0 @@
-graphic: 0.701
-device: 0.489
-mistranslation: 0.472
-semantic: 0.387
-other: 0.345
-network: 0.323
-instruction: 0.261
-socket: 0.244
-vnc: 0.204
-KVM: 0.099
-assembly: 0.078
-boot: 0.070
-
-[BUG][CPU hot-plug]CPU hot-plugs cause the qemu process to coredump
-
-Hello,Recently, when I was developing CPU hot-plugs under the loongarch
-architecture,
-I found that there was a problem with qemu cpu hot-plugs under x86
-architecture,
-which caused the qemu process coredump when repeatedly inserting and
-unplugging
-the CPU when the TCG was accelerated.
-
-
-The specific operation process is as follows:
-
-1.Use the following command to start the virtual machine
-
-qemu-system-x86_64 \
--machine q35  \
--cpu Broadwell-IBRS \
--smp 1,maxcpus=4,sockets=4,cores=1,threads=1 \
--m 4G \
--drive file=~/anolis-8.8.qcow2  \
--serial stdio   \
--monitor telnet:localhost:4498,server,nowait
-
-
-2.Enter QEMU Monitor via telnet for repeated CPU insertion and unplugging
-
-telnet 127.0.0.1 4498
-(qemu) device_add
-Broadwell-IBRS-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=cpu1
-(qemu) device_del cpu1
-(qemu) device_add
-Broadwell-IBRS-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=cpu1
-3.You will notice that the QEMU process has a coredump
-
-# malloc(): unsorted double linked list corrupted
-Aborted (core dumped)
-
diff --git a/results/classifier/005/graphic/30680944 b/results/classifier/005/graphic/30680944
deleted file mode 100644
index f0d07b11..00000000
--- a/results/classifier/005/graphic/30680944
+++ /dev/null
@@ -1,603 +0,0 @@
-graphic: 0.965
-semantic: 0.953
-other: 0.944
-assembly: 0.940
-device: 0.935
-instruction: 0.919
-socket: 0.864
-boot: 0.840
-vnc: 0.815
-network: 0.813
-mistranslation: 0.799
-KVM: 0.701
-
-[BUG]QEMU jump into interrupt when single-stepping on aarch64
-
-Dear, folks,
-
-I try to debug Linux kernel with QEMU in single-stepping mode on aarch64 
-platform,
-the added breakpoint hits but after I type `step`, the gdb always jumps into 
-interrupt.
-
-My env:
-
-        gdb-10.2
-        qemu-6.2.0
-        host kernel: 5.10.84
-        VM kernel: 5.10.84
-
-The steps to reproduce:
-        # host console: run a VM with only one core, the import arg: <qemu:arg 
-value='-s'/>
-        # details can be found here:
-https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
-virsh create dev_core0.xml
-        
-        # run gdb client
-        gdb ./vmlinux
-
-        # gdb client on host console
-        (gdb) dir 
-./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
-        (gdb) target remote localhost:1234
-        (gdb) info b
-        Num     Type           Disp Enb Address            What
-        1       breakpoint     keep y   <MULTIPLE>
-        1.1                         y   0xffff800010361444 
-mm/memory-failure.c:1318
-        1.2                         y   0xffff800010361450 in memory_failure
-                                                   at mm/memory-failure.c:1488
-        (gdb) c
-        Continuing.
-
-        # console in VM, use madvise to inject a hwposion at virtual address 
-vaddr,
-        # which will hit the b inmemory_failur: madvise(vaddr, pagesize, 
-MADV_HWPOISON);
-        # and the VM pause
-        ./run_madvise.c
-
-        # gdb client on host console
-        (gdb)
-        Continuing.
-        Breakpoint 1, 0xffff800010361444 in memory_failure () at 
-mm/memory-failure.c:1318
-        1318                    res = -EHWPOISON;
-        (gdb) n
-        vectors () at arch/arm64/kernel/entry.S:552
-        552             kernel_ventry   1, irq                          // IRQ 
-EL1h
-        (gdb) n
-        (gdb) n
-        (gdb) n
-        (gdb) n
-        gic_handle_irq (regs=0xffff8000147c3b80) at 
-drivers/irqchip/irq-gic-v3.c:721
-        # after several step, I got the irqnr
-        (gdb) p irqnr
-        $5 = 8262
-
-Sometimes, the irqnr is 27， which is used for arch_timer.
-
-I was wondering do you have any comments on this? And feedback are welcomed.
-
-Thank you.
-
-Best Regards.
-Shuai
-
-On 4/6/22 09:30, Shuai Xue wrote:
-Dear, folks,
-
-I try to debug Linux kernel with QEMU in single-stepping mode on aarch64 
-platform,
-the added breakpoint hits but after I type `step`, the gdb always jumps into 
-interrupt.
-
-My env:
-
-        gdb-10.2
-        qemu-6.2.0
-        host kernel: 5.10.84
-        VM kernel: 5.10.84
-
-The steps to reproduce:
-        # host console: run a VM with only one core, the import arg: <qemu:arg 
-value='-s'/>
-        # details can be found here:
-https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
-virsh create dev_core0.xml
-        
-        # run gdb client
-        gdb ./vmlinux
-
-        # gdb client on host console
-        (gdb) dir 
-./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
-        (gdb) target remote localhost:1234
-        (gdb) info b
-        Num     Type           Disp Enb Address            What
-        1       breakpoint     keep y   <MULTIPLE>
-        1.1                         y   0xffff800010361444 
-mm/memory-failure.c:1318
-        1.2                         y   0xffff800010361450 in memory_failure
-                                                    at mm/memory-failure.c:1488
-        (gdb) c
-        Continuing.
-
-        # console in VM, use madvise to inject a hwposion at virtual address 
-vaddr,
-        # which will hit the b inmemory_failur: madvise(vaddr, pagesize, 
-MADV_HWPOISON);
-        # and the VM pause
-        ./run_madvise.c
-
-        # gdb client on host console
-        (gdb)
-        Continuing.
-        Breakpoint 1, 0xffff800010361444 in memory_failure () at 
-mm/memory-failure.c:1318
-        1318                    res = -EHWPOISON;
-        (gdb) n
-        vectors () at arch/arm64/kernel/entry.S:552
-        552             kernel_ventry   1, irq                          // IRQ 
-EL1h
-The 'n' command is not a single-step: use stepi, which will suppress interrupts.
-Anyway, not a bug.
-
-r~
-
-在 2022/4/7 AM12:57, Richard Henderson 写道:
->
-On 4/6/22 09:30, Shuai Xue wrote:
->
-> Dear, folks,
->
->
->
-> I try to debug Linux kernel with QEMU in single-stepping mode on aarch64
->
-> platform,
->
-> the added breakpoint hits but after I type `step`, the gdb always jumps into
->
-> interrupt.
->
->
->
-> My env:
->
->
->
->     gdb-10.2
->
->     qemu-6.2.0
->
->     host kernel: 5.10.84
->
->     VM kernel: 5.10.84
->
->
->
-> The steps to reproduce:
->
->     # host console: run a VM with only one core, the import arg: <qemu:arg
->
-> value='-s'/>
->
->     # details can be found here:
->
->
-https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
->
->     virsh create dev_core0.xml
->
->    Â
->
->     # run gdb client
->
->     gdb ./vmlinux
->
->
->
->     # gdb client on host console
->
->     (gdb) dir
->
-> ./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
->
->     (gdb) target remote localhost:1234
->
->     (gdb) info b
->
->     Num     Type           Disp Enb Address            What
->
->     1       breakpoint     keep y   <MULTIPLE>
->
->     1.1                         y   0xffff800010361444
->
-> mm/memory-failure.c:1318
->
->     1.2                         y   0xffff800010361450 in memory_failure
->
->                                                     at
->
-> mm/memory-failure.c:1488
->
->     (gdb) c
->
->     Continuing.
->
->
->
->     # console in VM, use madvise to inject a hwposion at virtual address
->
-> vaddr,
->
->     # which will hit the b inmemory_failur: madvise(vaddr, pagesize,
->
-> MADV_HWPOISON);
->
->     # and the VM pause
->
->     ./run_madvise.c
->
->
->
->     # gdb client on host console
->
->     (gdb)
->
->     Continuing.
->
->     Breakpoint 1, 0xffff800010361444 in memory_failure () at
->
-> mm/memory-failure.c:1318
->
->     1318                    res = -EHWPOISON;
->
->     (gdb) n
->
->     vectors () at arch/arm64/kernel/entry.S:552
->
->     552             kernel_ventry   1, irq                          // IRQ
->
-> EL1h
->
->
-The 'n' command is not a single-step: use stepi, which will suppress
->
-interrupts.
->
-Anyway, not a bug.
->
->
-r~
-Hi, Richard,
-
-Thank you for your quick reply, I also try `stepi`, but it does NOT work either.
-
-        (gdb) c
-        Continuing.
-
-        Breakpoint 1, memory_failure (pfn=1273982, flags=1) at 
-mm/memory-failure.c:1488
-        1488    {
-        (gdb) stepi
-        vectors () at arch/arm64/kernel/entry.S:552
-        552             kernel_ventry   1, irq                          // IRQ 
-EL1h
-
-According to QEMU doc[1]: the default single stepping behavior is step with the 
-IRQs
-and timer service routines off. I checked the MASK bits used to control the 
-single
-stepping IE on my machine as bellow:
-
-        # gdb client on host (x86 plafrom)
-        (gdb) maintenance packet qqemu.sstepbits
-        sending: "qqemu.sstepbits"
-        received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
-
-The sstep MASK looks as expected, but does not work as expected.
-
-I also try the same kernel and qemu version on X86 platform:
->
->     gdb-10.2
->
->     qemu-6.2.0
->
->     host kernel: 5.10.84
->
->     VM kernel: 5.10.84
-The command `n` jumps to the next instruction.
-
-        # gdb client on host (x86 plafrom)
-        (gdb) b memory-failure.c:1488
-        Breakpoint 1, memory_failure (pfn=1128931, flags=1) at 
-mm/memory-failure.c:1488
-        1488    {
-        (gdb) n
-        1497            if (!sysctl_memory_failure_recovery)
-        (gdb) stepi
-        0xffffffff812efdbc      1497            if 
-(!sysctl_memory_failure_recovery)
-        (gdb) stepi
-        0xffffffff812efdbe      1497            if 
-(!sysctl_memory_failure_recovery)
-        (gdb) n
-        1500            p = pfn_to_online_page(pfn);
-        (gdb) l
-        1496
-        1497            if (!sysctl_memory_failure_recovery)
-        1498                    panic("Memory failure on page %lx", pfn);
-        1499
-        1500            p = pfn_to_online_page(pfn);
-        1501            if (!p) {
-
-Best Regrades,
-Shuai
-
-
-[1]
-https://github.com/qemu/qemu/blob/master/docs/system/gdb.rst
-
-在 2022/4/7 PM12:10, Shuai Xue 写道:
->
-在 2022/4/7 AM12:57, Richard Henderson 写道:
->
-> On 4/6/22 09:30, Shuai Xue wrote:
->
->> Dear, folks,
->
->>
->
->> I try to debug Linux kernel with QEMU in single-stepping mode on aarch64
->
->> platform,
->
->> the added breakpoint hits but after I type `step`, the gdb always jumps
->
->> into interrupt.
->
->>
->
->> My env:
->
->>
->
->>     gdb-10.2
->
->>     qemu-6.2.0
->
->>     host kernel: 5.10.84
->
->>     VM kernel: 5.10.84
->
->>
->
->> The steps to reproduce:
->
->>     # host console: run a VM with only one core, the import arg: <qemu:arg
->
->> value='-s'/>
->
->>     # details can be found here:
->
->>
-https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
->
->>     virsh create dev_core0.xml
->
->>    Â
->
->>     # run gdb client
->
->>     gdb ./vmlinux
->
->>
->
->>     # gdb client on host console
->
->>     (gdb) dir
->
->> ./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
->
->>     (gdb) target remote localhost:1234
->
->>     (gdb) info b
->
->>     Num     Type           Disp Enb Address            What
->
->>     1       breakpoint     keep y   <MULTIPLE>
->
->>     1.1                         y   0xffff800010361444
->
->> mm/memory-failure.c:1318
->
->>     1.2                         y   0xffff800010361450 in memory_failure
->
->>                                                     at
->
->> mm/memory-failure.c:1488
->
->>     (gdb) c
->
->>     Continuing.
->
->>
->
->>     # console in VM, use madvise to inject a hwposion at virtual address
->
->> vaddr,
->
->>     # which will hit the b inmemory_failur: madvise(vaddr, pagesize,
->
->> MADV_HWPOISON);
->
->>     # and the VM pause
->
->>     ./run_madvise.c
->
->>
->
->>     # gdb client on host console
->
->>     (gdb)
->
->>     Continuing.
->
->>     Breakpoint 1, 0xffff800010361444 in memory_failure () at
->
->> mm/memory-failure.c:1318
->
->>     1318                    res = -EHWPOISON;
->
->>     (gdb) n
->
->>     vectors () at arch/arm64/kernel/entry.S:552
->
->>     552             kernel_ventry   1, irq                          // IRQ
->
->> EL1h
->
->
->
-> The 'n' command is not a single-step: use stepi, which will suppress
->
-> interrupts.
->
-> Anyway, not a bug.
->
->
->
-> r~
->
->
-Hi, Richard,
->
->
-Thank you for your quick reply, I also try `stepi`, but it does NOT work
->
-either.
->
->
-(gdb) c
->
-Continuing.
->
->
-Breakpoint 1, memory_failure (pfn=1273982, flags=1) at
->
-mm/memory-failure.c:1488
->
-1488    {
->
-(gdb) stepi
->
-vectors () at arch/arm64/kernel/entry.S:552
->
-552             kernel_ventry   1, irq                          // IRQ
->
-EL1h
->
->
-According to QEMU doc[1]: the default single stepping behavior is step with
->
-the IRQs
->
-and timer service routines off. I checked the MASK bits used to control the
->
-single
->
-stepping IE on my machine as bellow:
->
->
-# gdb client on host (x86 plafrom)
->
-(gdb) maintenance packet qqemu.sstepbits
->
-sending: "qqemu.sstepbits"
->
-received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
->
->
-The sstep MASK looks as expected, but does not work as expected.
->
->
-I also try the same kernel and qemu version on X86 platform:
->
->>     gdb-10.2
->
->>     qemu-6.2.0
->
->>     host kernel: 5.10.84
->
->>     VM kernel: 5.10.84
->
->
->
-The command `n` jumps to the next instruction.
->
->
-# gdb client on host (x86 plafrom)
->
-(gdb) b memory-failure.c:1488
->
-Breakpoint 1, memory_failure (pfn=1128931, flags=1) at
->
-mm/memory-failure.c:1488
->
-1488    {
->
-(gdb) n
->
-1497            if (!sysctl_memory_failure_recovery)
->
-(gdb) stepi
->
-0xffffffff812efdbc      1497            if
->
-(!sysctl_memory_failure_recovery)
->
-(gdb) stepi
->
-0xffffffff812efdbe      1497            if
->
-(!sysctl_memory_failure_recovery)
->
-(gdb) n
->
-1500            p = pfn_to_online_page(pfn);
->
-(gdb) l
->
-1496
->
-1497            if (!sysctl_memory_failure_recovery)
->
-1498                    panic("Memory failure on page %lx", pfn);
->
-1499
->
-1500            p = pfn_to_online_page(pfn);
->
-1501            if (!p) {
->
->
-Best Regrades,
->
-Shuai
->
->
->
-[1]
-https://github.com/qemu/qemu/blob/master/docs/system/gdb.rst
-Hi, Richard,
-
-I was wondering that do you have any comments to this?
-
-Best Regrades,
-Shuai
-
diff --git a/results/classifier/005/graphic/46572227 b/results/classifier/005/graphic/46572227
deleted file mode 100644
index ae72af54..00000000
--- a/results/classifier/005/graphic/46572227
+++ /dev/null
@@ -1,414 +0,0 @@
-semantic: 0.965
-graphic: 0.962
-mistranslation: 0.946
-assembly: 0.931
-other: 0.927
-instruction: 0.906
-vnc: 0.904
-device: 0.901
-boot: 0.900
-KVM: 0.857
-network: 0.841
-socket: 0.841
-
-[Qemu-devel] [Bug?] Windows 7's time drift obviously while RTC rate switching frequently between high and low timer rate
-
-Hi,
-
-We tested with the latest QEMU, and found that time drift obviously (clock fast 
-in guest)
-in Windows 7 64 bits guest in some cases.
-
-It is easily to reproduce, using the follow QEMU command line to start windows 
-7:
-
-# x86_64-softmmu/qemu-system-x86_64 -name win7_64_2U_raw -machine 
-pc-i440fx-2.6,accel=kvm,usb=off -cpu host -m 2048 -realtime mlock=off -smp 
-4,sockets=2,cores=2,threads=1 -rtc base=utc,clock=vm,driftfix=slew -no-hpet 
--global kvm-pit.lost_tick_policy=discard -hda /mnt/nfs/win7_sp1_32_2U_raw -vnc 
-:11 -netdev tap,id=hn0,vhost=off -device rtl8139,id=net-pci0,netdev=hn0 -device 
-piix3-usb-uhci,id=usb -device usb-tablet,id=input0 -device usb-mouse,id=input1 
--device usb-kbd,id=input2 -monitor stdio
-
-Adjust the VM's time to host time, and run java application or run the follow 
-program
-in windows 7:
-
-#pragma comment(lib, "winmm")
-#include <stdio.h>
-#include <windows.h>
-
-#define SWITCH_PEROID  13
-
-int main()
-{
-        DWORD count = 0;
-
-        while (1)
-        {
-                count++;
-                timeBeginPeriod(1);
-                DWORD start = timeGetTime();
-                Sleep(40);
-                timeEndPeriod(1);
-                if ((count % SWITCH_PEROID) == 0) {
-                        Sleep(1);
-                }
-        }
-        return 0;
-}
-
-After few minutes, you will find that the time in windows 7 goes ahead of the
-host time, drifts about several seconds.
-
-I have dug deeper in this problem. For windows systems that use the CMOS timer,
-the base interrupt rate is usually 64Hz, but running some application in VM
-will raise the timer rate to 1024Hz, running java application and or above
-program will raise the timer rate.
-Besides, Windows operating systems generally keep time by counting timer
-interrupts (ticks). But QEMU seems not emulate the rate converting fine.
-
-We update the timer in function periodic_timer_update():
-static void periodic_timer_update(RTCState *s, int64_t current_time)
-{
-
-        cur_clock = muldiv64(current_time, RTC_CLOCK_RATE, get_ticks_per_sec());
-        next_irq_clock = (cur_clock & ~(period - 1)) + period;
-                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Here we calculate the next interrupt time by align the current clock with the
-new period, I'm a little confused that why we care about the *history* time ?
-If VM switches from high rate to low rate, the next interrupt time may come
-earlier than it supposed to be. We have observed it in our test. we printed the
-interval time of interrupts and the VM's current time (We got the time from VM).
-
-Here is part of the log:
-... ...
-period=512 irq inject 1534: 15625 us
-Tue Mar 29 04:38:00 2016
-*irq_num_period_32=0, irq_num_period_512=64: [3]: Real time interval is 999696 
-us
-... ...
-*irq_num_period_32=893, irq_num_period_512=9 [81]: Real time interval is 951086 
-us
-Convert 32 --- > 512: 703: 96578 us
-period=512 irq inject 44391: 12702 us
-Convert 512 --- > 32: 704: 12704 us11
-period=32 irq inject 44392: 979 us
-... ...
-32 --- > 512: 705: 24388 us
-period=512 irq inject 44417: 6834 us
-Convert 512 --- > 32: 706: 6830 us
-period=32 irq inject 44418: 978 us
-... ...
-Convert 32 --- > 512: 707: 60525 us
-period=512 irq inject 44480: 1945 us
-Convert 512 --- > 32: 708: 1955 us
-period=32 irq inject 44481: 977 us
-... ...
-Convert 32 --- > 512: 709: 36105 us
-period=512 irq inject 44518: 10741 us
-Convert 512 --- > 32: 710: 10736 us
-period=32 irq inject 44519: 989 us
-... ...
-Convert 32 --- > 512: 711: 123998 us
-period=512 irq inject 44646: 974 us
-period=512 irq inject 44647: 15607 us
-Convert 512 --- > 32: 712: 16560 us
-period=32 irq inject 44648: 980 us
-... ...
-period=32 irq inject 44738: 974 us
-Convert 32 --- > 512: 713: 88828 us
-period=512 irq inject 44739: 4885 us
-Convert 512 --- > 32: 714: 4882 us
-period=32 irq inject 44740: 989 us
-... ...
-period=32 irq inject 44842: 974 us
-Convert 32 --- > 512: 715: 100537 us
-period=512 irq inject 44843: 8788 us
-Convert 512 --- > 32: 716: 8789 us
-period=32 irq inject 44844: 972 us
-... ...
-period=32 irq inject 44941: 979 us
-Convert 32 --- > 512: 717: 95677 us
-period=512 irq inject 44942: 13661 us
-Convert 512 --- > 32: 718: 13657 us
-period=32 irq inject 44943: 987 us
-... ...
-Convert 32 --- > 512: 719: 94690 us
-period=512 irq inject 45040: 14643 us
-Convert 512 --- > 32: 720: 14642 us
-period=32 irq inject 45041: 974 us
-... ...
-Convert 32 --- > 512: 721: 88848 us
-period=512 irq inject 45132: 4892 us
-Convert 512 --- > 32: 722: 4931 us
-period=32 irq inject 45133: 964 us
-... ...
-Tue Mar 29 04:39:19 2016
-*irq_num_period_32:835, irq_num_period_512:11 [82], Real time interval is 
-911520 us
-
-For windows 7, it has got 835 IRQs which injected during the period of 32,
-and got 11 IRQs that injected during the period of 512. it updated the 
-wall-clock
-time with one second, because it supposed it has counted
-(835*976.5+11*15625)= 987252.5 us, but the real interval time is 911520 us.
-
-IMHO, we should calculate the next interrupt time based on the time of last
-interrupt injected, and it seems to be more similar with hardware CMOS timer
-in this way.
-Maybe someone can tell me the reason why we calculated the interrupt timer
-in that way, or is it a bug ? ;)
-
-Thanks,
-Hailiang
-
-ping...
-
-It seems that we can eliminate the drift by the following patch.
-(I tested it for two hours, and there is no drift, before, the timer
-in Windows 7 drifts about 2 seconds per minute.) I'm not sure if it is
-the right way to solve the problem.
-Any comments are welcomed. Thanks.
-
-From bd6acd577cbbc9d92d6376c770219470f184f7de Mon Sep 17 00:00:00 2001
-From: zhanghailiang <address@hidden>
-Date: Thu, 31 Mar 2016 16:36:15 -0400
-Subject: [PATCH] timer/mc146818rtc: fix timer drift in Windows OS while RTC
- rate converting frequently
-
-Signed-off-by: zhanghailiang <address@hidden>
----
- hw/timer/mc146818rtc.c | 25 ++++++++++++++++++++++---
- 1 file changed, 22 insertions(+), 3 deletions(-)
-
-diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c
-index 2ac0fd3..e39d2da 100644
---- a/hw/timer/mc146818rtc.c
-+++ b/hw/timer/mc146818rtc.c
-@@ -79,6 +79,7 @@ typedef struct RTCState {
-     /* periodic timer */
-     QEMUTimer *periodic_timer;
-     int64_t next_periodic_time;
-+    uint64_t last_periodic_time;
-     /* update-ended timer */
-     QEMUTimer *update_timer;
-     uint64_t next_alarm_time;
-@@ -152,7 +153,8 @@ static void rtc_coalesced_timer(void *opaque)
- static void periodic_timer_update(RTCState *s, int64_t current_time)
- {
-     int period_code, period;
--    int64_t cur_clock, next_irq_clock;
-+    int64_t cur_clock, next_irq_clock, pre_irq_clock;
-+    bool change = false;
-
-     period_code = s->cmos_data[RTC_REG_A] & 0x0f;
-     if (period_code != 0
-@@ -165,14 +167,28 @@ static void periodic_timer_update(RTCState *s, int64_t 
-current_time)
-         if (period != s->period) {
-             s->irq_coalesced = (s->irq_coalesced * s->period) / period;
-             DPRINTF_C("cmos: coalesced irqs scaled to %d\n", s->irq_coalesced);
-+            if (s->period && period) {
-+                change = true;
-+            }
-         }
-         s->period = period;
- #endif
-         /* compute 32 khz clock */
-         cur_clock =
-             muldiv64(current_time, RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
-+        if (change) {
-+            int offset = 0;
-
--        next_irq_clock = (cur_clock & ~(period - 1)) + period;
-+            pre_irq_clock = muldiv64(s->last_periodic_time, RTC_CLOCK_RATE,
-+                                    NANOSECONDS_PER_SECOND);
-+            if ((cur_clock - pre_irq_clock) >  period) {
-+                offset =  (cur_clock - pre_irq_clock) / period;
-+            }
-+            s->irq_coalesced += offset;
-+            next_irq_clock = pre_irq_clock + (offset + 1) * period;
-+        } else {
-+            next_irq_clock = (cur_clock & ~(period - 1)) + period;
-+        }
-         s->next_periodic_time = muldiv64(next_irq_clock, 
-NANOSECONDS_PER_SECOND,
-                                          RTC_CLOCK_RATE) + 1;
-         timer_mod(s->periodic_timer, s->next_periodic_time);
-@@ -187,7 +203,9 @@ static void periodic_timer_update(RTCState *s, int64_t 
-current_time)
- static void rtc_periodic_timer(void *opaque)
- {
-     RTCState *s = opaque;
--
-+    int64_t next_periodic_time;
-+
-+    next_periodic_time = s->next_periodic_time;
-     periodic_timer_update(s, s->next_periodic_time);
-     s->cmos_data[RTC_REG_C] |= REG_C_PF;
-     if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
-@@ -204,6 +222,7 @@ static void rtc_periodic_timer(void *opaque)
-                 DPRINTF_C("cmos: coalesced irqs increased to %d\n",
-                           s->irq_coalesced);
-             }
-+            s->last_periodic_time = next_periodic_time;
-         } else
- #endif
-         qemu_irq_raise(s->irq);
---
-1.8.3.1
-
-
-On 2016/3/29 19:58, Hailiang Zhang wrote:
-Hi,
-
-We tested with the latest QEMU, and found that time drift obviously (clock fast 
-in guest)
-in Windows 7 64 bits guest in some cases.
-
-It is easily to reproduce, using the follow QEMU command line to start windows 
-7:
-
-# x86_64-softmmu/qemu-system-x86_64 -name win7_64_2U_raw -machine 
-pc-i440fx-2.6,accel=kvm,usb=off -cpu host -m 2048 -realtime mlock=off -smp 
-4,sockets=2,cores=2,threads=1 -rtc base=utc,clock=vm,driftfix=slew -no-hpet 
--global kvm-pit.lost_tick_policy=discard -hda /mnt/nfs/win7_sp1_32_2U_raw -vnc 
-:11 -netdev tap,id=hn0,vhost=off -device rtl8139,id=net-pci0,netdev=hn0 -device 
-piix3-usb-uhci,id=usb -device usb-tablet,id=input0 -device usb-mouse,id=input1 
--device usb-kbd,id=input2 -monitor stdio
-
-Adjust the VM's time to host time, and run java application or run the follow 
-program
-in windows 7:
-
-#pragma comment(lib, "winmm")
-#include <stdio.h>
-#include <windows.h>
-
-#define SWITCH_PEROID  13
-
-int main()
-{
-        DWORD count = 0;
-
-        while (1)
-        {
-                count++;
-                timeBeginPeriod(1);
-                DWORD start = timeGetTime();
-                Sleep(40);
-                timeEndPeriod(1);
-                if ((count % SWITCH_PEROID) == 0) {
-                        Sleep(1);
-                }
-        }
-        return 0;
-}
-
-After few minutes, you will find that the time in windows 7 goes ahead of the
-host time, drifts about several seconds.
-
-I have dug deeper in this problem. For windows systems that use the CMOS timer,
-the base interrupt rate is usually 64Hz, but running some application in VM
-will raise the timer rate to 1024Hz, running java application and or above
-program will raise the timer rate.
-Besides, Windows operating systems generally keep time by counting timer
-interrupts (ticks). But QEMU seems not emulate the rate converting fine.
-
-We update the timer in function periodic_timer_update():
-static void periodic_timer_update(RTCState *s, int64_t current_time)
-{
-
-          cur_clock = muldiv64(current_time, RTC_CLOCK_RATE, 
-get_ticks_per_sec());
-          next_irq_clock = (cur_clock & ~(period - 1)) + period;
-                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Here we calculate the next interrupt time by align the current clock with the
-new period, I'm a little confused that why we care about the *history* time ?
-If VM switches from high rate to low rate, the next interrupt time may come
-earlier than it supposed to be. We have observed it in our test. we printed the
-interval time of interrupts and the VM's current time (We got the time from VM).
-
-Here is part of the log:
-... ...
-period=512 irq inject 1534: 15625 us
-Tue Mar 29 04:38:00 2016
-*irq_num_period_32=0, irq_num_period_512=64: [3]: Real time interval is 999696 
-us
-... ...
-*irq_num_period_32=893, irq_num_period_512=9 [81]: Real time interval is 951086 
-us
-Convert 32 --- > 512: 703: 96578 us
-period=512 irq inject 44391: 12702 us
-Convert 512 --- > 32: 704: 12704 us11
-period=32 irq inject 44392: 979 us
-... ...
-32 --- > 512: 705: 24388 us
-period=512 irq inject 44417: 6834 us
-Convert 512 --- > 32: 706: 6830 us
-period=32 irq inject 44418: 978 us
-... ...
-Convert 32 --- > 512: 707: 60525 us
-period=512 irq inject 44480: 1945 us
-Convert 512 --- > 32: 708: 1955 us
-period=32 irq inject 44481: 977 us
-... ...
-Convert 32 --- > 512: 709: 36105 us
-period=512 irq inject 44518: 10741 us
-Convert 512 --- > 32: 710: 10736 us
-period=32 irq inject 44519: 989 us
-... ...
-Convert 32 --- > 512: 711: 123998 us
-period=512 irq inject 44646: 974 us
-period=512 irq inject 44647: 15607 us
-Convert 512 --- > 32: 712: 16560 us
-period=32 irq inject 44648: 980 us
-... ...
-period=32 irq inject 44738: 974 us
-Convert 32 --- > 512: 713: 88828 us
-period=512 irq inject 44739: 4885 us
-Convert 512 --- > 32: 714: 4882 us
-period=32 irq inject 44740: 989 us
-... ...
-period=32 irq inject 44842: 974 us
-Convert 32 --- > 512: 715: 100537 us
-period=512 irq inject 44843: 8788 us
-Convert 512 --- > 32: 716: 8789 us
-period=32 irq inject 44844: 972 us
-... ...
-period=32 irq inject 44941: 979 us
-Convert 32 --- > 512: 717: 95677 us
-period=512 irq inject 44942: 13661 us
-Convert 512 --- > 32: 718: 13657 us
-period=32 irq inject 44943: 987 us
-... ...
-Convert 32 --- > 512: 719: 94690 us
-period=512 irq inject 45040: 14643 us
-Convert 512 --- > 32: 720: 14642 us
-period=32 irq inject 45041: 974 us
-... ...
-Convert 32 --- > 512: 721: 88848 us
-period=512 irq inject 45132: 4892 us
-Convert 512 --- > 32: 722: 4931 us
-period=32 irq inject 45133: 964 us
-... ...
-Tue Mar 29 04:39:19 2016
-*irq_num_period_32:835, irq_num_period_512:11 [82], Real time interval is 
-911520 us
-
-For windows 7, it has got 835 IRQs which injected during the period of 32,
-and got 11 IRQs that injected during the period of 512. it updated the 
-wall-clock
-time with one second, because it supposed it has counted
-(835*976.5+11*15625)= 987252.5 us, but the real interval time is 911520 us.
-
-IMHO, we should calculate the next interrupt time based on the time of last
-interrupt injected, and it seems to be more similar with hardware CMOS timer
-in this way.
-Maybe someone can tell me the reason why we calculated the interrupt timer
-in that way, or is it a bug ? ;)
-
-Thanks,
-Hailiang
-
diff --git a/results/classifier/005/graphic/53568181 b/results/classifier/005/graphic/53568181
deleted file mode 100644
index 31dd76b6..00000000
--- a/results/classifier/005/graphic/53568181
+++ /dev/null
@@ -1,86 +0,0 @@
-semantic: 0.943
-graphic: 0.940
-assembly: 0.936
-device: 0.936
-vnc: 0.935
-instruction: 0.932
-network: 0.925
-other: 0.921
-KVM: 0.917
-boot: 0.876
-socket: 0.875
-mistranslation: 0.854
-
-[BUG] x86/PAT handling severely crippled AMD-V SVM KVM performance
-
-Hi, I maintain an out-of-tree 3D APIs pass-through QEMU device models at
-https://github.com/kjliew/qemu-3dfx
-that provide 3D acceleration for legacy
-32-bit Windows guests (Win98SE, WinME, Win2k and WinXP) with the focus on
-playing old legacy games from 1996-2003. It currently supports the now-defunct
-3Dfx propriety API called Glide and an alternative OpenGL pass-through based on
-MESA implementation.
-
-The basic concept of both implementations create memory-mapped virtual
-interfaces consist of host/guest shared memory with guest-push model instead of
-a more common host-pull model for typical QEMU device model implementation.
-Guest uses shared memory as FIFOs for drawing commands and data to bulk up the
-operations until serialization event that flushes the FIFOs into host. This
-achieves extremely good performance since virtual CPUs are fast with hardware
-acceleration (Intel VT/AMD-V) and reduces the overhead of frequent VMEXITs to
-service the device emulation. Both implementations work on Windows 10 with WHPX
-and HAXM accelerators as well as KVM in Linux.
-
-On Windows 10, QEMU WHPX implementation does not sync MSR_IA32_PAT during
-host/guest states sync. There is no visibility into the closed-source WHPX on
-how things are managed behind the scene, but from measuring performance figures
-I can conclude that it didn't handle the MSR_IA32_PAT correctly for both Intel
-and AMD. Call this fair enough, if you will, it didn't flag any concerns, in
-fact games such as Quake2 and Quake3 were still within playable frame rate of
-40~60FPS on Win2k/XP guest. Until the same games were run on Win98/ME guest and
-the frame rate blew off the roof (300~500FPS) on the same CPU and GPU. In fact,
-the later seemed to be more inlined with runnng the games bare-metal with vsync
-off.
-
-On Linux (at the time of writing kernel 5.6.7/Mesa 20.0), the difference
-prevailed. Intel CPUs (and it so happened that I was on laptop with Intel GPU),
-the VMX-based kvm_intel got it right while SVM-based kvm_amd did not.
-To put this in simple exaggeration, an aging Core i3-4010U/HD Graphics 4400
-(Haswell GT2) exhibited an insane performance in Quake2/Quake3 timedemos that
-totally crushed more recent AMD Ryzen 2500U APU/Vega 8 Graphics and AMD
-FX8300/NVIDIA GT730 on desktop. Simply unbelievable!
-
-It turned out that there was something to do with AMD-V NPT. By loading kvm_amd
-with npt=0, AMD Ryzen APU and FX8300 regained a huge performance leap. However,
-AMD NPT issue with KVM was supposedly fixed in 2017 kernel commits. NPT=0 would
-actually incur performance loss for VM due to intervention required by
-hypervisors to maintain the shadow page tables.  Finally, I was able to find the
-pointer that pointed to MSR_IA32_PAT register. By updating the MSR_IA32_PAT to
-0x0606xxxx0606xxxxULL, AMD CPUs now regain their rightful performance without
-taking the hit of NPT=0 for Linux KVM. Taking the same solution into Windows,
-both Intel and AMD CPUs no longer require Win98/ME guest to unleash the full
-performance potentials and performance figures based on games measured on WHPX
-were not very far behind Linux KVM.
-
-So I guess the problem lies in host/guest shared memory regions mapped as
-uncacheable from virtual CPU perspective. As virtual CPUs now completely execute
-in hardware context with x86 hardware virtualiztion extensions, the cacheability
-of memory types would severely impact the performance on guests. WHPX didn't
-handle it for both Intel EPT and AMD NPT, but KVM seems to do it right for Intel
-EPT. I don't have the correct fix for QEMU. But what I can do for my 3D APIs
-pass-through device models is to implement host-side hooks to reprogram and
-restore MSR_IA32_PAT upon activation/deactivation of the 3D APIs. Perhaps there
-is also a better solution of having the proper kernel drivers for virtual
-interfaces to manage the memory types of host/guest shared memory in kernel
-space, but to do that and the needs of Microsoft tools/DDKs, I will just forget
-it. The guest stubs uses the same kernel drivers included in 3Dfx drivers for
-memory mapping and the virtual interfaces remain driver-less from Windows OS
-perspective. Considering the current state of halting progress for QEMU native
-virgil3D to support Windows OS, I am just being pragmatic. I understand that
-QEMU virgil3D will eventually bring 3D acceleration for Windows guests, but I do
-not expect anything to support legacy 32-bit Windows OSes which have out-grown
-their commercial usefulness.
-
-Regards,
-KJ Liew
-
diff --git a/results/classifier/005/graphic/55961334 b/results/classifier/005/graphic/55961334
deleted file mode 100644
index 3bd906bb..00000000
--- a/results/classifier/005/graphic/55961334
+++ /dev/null
@@ -1,47 +0,0 @@
-graphic: 0.909
-KVM: 0.881
-instruction: 0.803
-semantic: 0.775
-device: 0.764
-mistranslation: 0.718
-other: 0.715
-vnc: 0.709
-network: 0.697
-socket: 0.636
-boot: 0.569
-assembly: 0.395
-
-[Bug] "-ht" flag ignored under KVM - guest still reports HT
-
-Hi Community,
-We have observed that the 'ht' feature bit cannot be disabled when QEMU runs
-with KVM acceleration.
-qemu-system-x86_64 \
-  --enable-kvm \
-  -machine q35 \
-  -cpu host,-ht \
-  -smp 4 \
-  -m 4G \
-  -drive file=rootfs.img,format=raw \
-  -nographic \
-  -append 'console=ttyS0 root=/dev/sda rw'
-Because '-ht' is specified, the guest should expose no HT capability
-(cpuid.1.edx[28] = 0), and /proc/cpuinfo shouldn't show HT feature, but we still
-saw ht in linux guest when run 'cat /proc/cpuinfo'.
-XiaoYao mentioned that:
-
-It has been the behavior of QEMU since
-
-  commit 400281af34e5ee6aa9f5496b53d8f82c6fef9319
-  Author: Andre Przywara <andre.przywara@amd.com>
-  Date:   Wed Aug 19 15:42:42 2009 +0200
-
-    set CPUID bits to present cores and threads topology
-
-that we cannot remove HT CPUID bit from guest via "-cpu xxx,-ht" if the
-VM has >= 2 vcpus.
-I'd like to know whether there's a plan to address this issue, or if the current
-behaviour is considered acceptable.
-Best regards,
-Ewan.
-
diff --git a/results/classifier/005/graphic/73660729 b/results/classifier/005/graphic/73660729
deleted file mode 100644
index 37e839f9..00000000
--- a/results/classifier/005/graphic/73660729
+++ /dev/null
@@ -1,39 +0,0 @@
-graphic: 0.858
-instruction: 0.753
-semantic: 0.698
-device: 0.697
-mistranslation: 0.633
-other: 0.620
-network: 0.598
-socket: 0.556
-vnc: 0.467
-assembly: 0.393
-boot: 0.367
-KVM: 0.272
-
-[BUG]The latest qemu crashed when I tested cxl
-
-I test cxl with the patch:[v11,0/2] arm/virt:
- CXL support via pxb_cxl.
-https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
-But the qemu crashed,and showing an error:
-qemu-system-aarch64: ../hw/arm/virt.c:1735: virt_get_high_memmap_enabled:
- Assertion `ARRAY_SIZE(extended_memmap) - VIRT_LOWMEMMAP_LAST == ARRAY_SIZE(enabled_array)' failed.
-Then I modify the patch to fix the bug:
-diff --git a/hw/arm/virt.c b/hw/arm/virt.c
-index ea2413a0ba..3d4cee3491 100644
---- a/hw/arm/virt.c
-+++ b/hw/arm/virt.c
-@@ -1710,6 +1730,7 @@ static inline bool *virt_get_high_memmap_enabled(VirtMachineState
- *vms,
-&vms->highmem_redists,
-&vms->highmem_ecam,
-&vms->highmem_mmio,
-+ &vms->cxl_devices_state.is_enabled,
-};
-Now qemu works good.
-Could you tell me when the patch(
-arm/virt:
- CXL support via pxb_cxl
-) will be merged into upstream?
-
diff --git a/results/classifier/005/instruction/11933524 b/results/classifier/005/instruction/11933524
deleted file mode 100644
index 371333c6..00000000
--- a/results/classifier/005/instruction/11933524
+++ /dev/null
@@ -1,1133 +0,0 @@
-instruction: 0.775
-other: 0.771
-device: 0.762
-assembly: 0.754
-socket: 0.751
-boot: 0.743
-graphic: 0.737
-mistranslation: 0.719
-vnc: 0.695
-KVM: 0.689
-semantic: 0.673
-network: 0.662
-
-[BUG] hw/i386/pc.c: CXL Fixed Memory Window should not reserve e820 in bios
-
-Early-boot e820 records will be inserted by the bios/efi/early boot
-software and be reported to the kernel via insert_resource.  Later, when
-CXL drivers iterate through the regions again, they will insert another
-resource and make the RESERVED memory area a child.
-
-This RESERVED memory area causes the memory region to become unusable,
-and as a result attempting to create memory regions with
-
-    `cxl create-region ...`
-
-Will fail due to the RESERVED area intersecting with the CXL window.
-
-
-During boot the following traceback is observed:
-
-0xffffffff81101650 in insert_resource_expand_to_fit ()
-0xffffffff83d964c5 in e820__reserve_resources_late ()
-0xffffffff83e03210 in pcibios_resource_survey ()
-0xffffffff83e04f4a in pcibios_init ()
-
-Which produces a call to reserve the CFMWS area:
-
-(gdb) p *new
-$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
-       flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
-       child = 0x0}
-
-Later the Kernel parses ACPI tables and reserves the exact same area as
-the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
-retains the RESERVED region and makes it a child of the new region.
-
-0xffffffff811016a4 in insert_resource_conflict ()
-                      insert_resource ()
-0xffffffff81a81389 in cxl_parse_cfmws ()
-0xffffffff818c4a81 in call_handler ()
-                      acpi_parse_entries_array ()
-
-(gdb) p/x *new
-$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
-       flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
-       child = 0x0}
-
-This produces the following output in /proc/iomem:
-
-590000000-68fffffff : CXL Window 0
-  590000000-68fffffff : Reserved
-
-This reserved area causes `get_free_mem_region()` to fail due to a check
-against `__region_intersects()`.  Due to this reserved area, the
-intersect check will only ever return REGION_INTERSECTS, which causes
-`cxl create-region` to always fail.
-
-Signed-off-by: Gregory Price <gregory.price@memverge.com>
----
- hw/i386/pc.c | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/hw/i386/pc.c b/hw/i386/pc.c
-index 566accf7e6..5bf5465a21 100644
---- a/hw/i386/pc.c
-+++ b/hw/i386/pc.c
-@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
-         hwaddr cxl_size = MiB;
- 
-         cxl_base = pc_get_cxl_range_start(pcms);
--        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
-         memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
-         memory_region_add_subregion(system_memory, cxl_base, mr);
-         cxl_resv_end = cxl_base + cxl_size;
-@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
-                 memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
-                                       "cxl-fixed-memory-region", fw->size);
-                 memory_region_add_subregion(system_memory, fw->base, &fw->mr);
--                e820_add_entry(fw->base, fw->size, E820_RESERVED);
-                 cxl_fmw_base += fw->size;
-                 cxl_resv_end = cxl_fmw_base;
-             }
--- 
-2.37.3
-
-Early-boot e820 records will be inserted by the bios/efi/early boot
-software and be reported to the kernel via insert_resource.  Later, when
-CXL drivers iterate through the regions again, they will insert another
-resource and make the RESERVED memory area a child.
-
-This RESERVED memory area causes the memory region to become unusable,
-and as a result attempting to create memory regions with
-
-     `cxl create-region ...`
-
-Will fail due to the RESERVED area intersecting with the CXL window.
-
-
-During boot the following traceback is observed:
-
-0xffffffff81101650 in insert_resource_expand_to_fit ()
-0xffffffff83d964c5 in e820__reserve_resources_late ()
-0xffffffff83e03210 in pcibios_resource_survey ()
-0xffffffff83e04f4a in pcibios_init ()
-
-Which produces a call to reserve the CFMWS area:
-
-(gdb) p *new
-$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
-        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
-        child = 0x0}
-
-Later the Kernel parses ACPI tables and reserves the exact same area as
-the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
-retains the RESERVED region and makes it a child of the new region.
-
-0xffffffff811016a4 in insert_resource_conflict ()
-                       insert_resource ()
-0xffffffff81a81389 in cxl_parse_cfmws ()
-0xffffffff818c4a81 in call_handler ()
-                       acpi_parse_entries_array ()
-
-(gdb) p/x *new
-$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
-        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
-        child = 0x0}
-
-This produces the following output in /proc/iomem:
-
-590000000-68fffffff : CXL Window 0
-   590000000-68fffffff : Reserved
-
-This reserved area causes `get_free_mem_region()` to fail due to a check
-against `__region_intersects()`.  Due to this reserved area, the
-intersect check will only ever return REGION_INTERSECTS, which causes
-`cxl create-region` to always fail.
-
-Signed-off-by: Gregory Price <gregory.price@memverge.com>
----
-  hw/i386/pc.c | 2 --
-  1 file changed, 2 deletions(-)
-
-diff --git a/hw/i386/pc.c b/hw/i386/pc.c
-index 566accf7e6..5bf5465a21 100644
---- a/hw/i386/pc.c
-+++ b/hw/i386/pc.c
-@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
-          hwaddr cxl_size = MiB;
-cxl_base = pc_get_cxl_range_start(pcms);
--        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
-          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
-          memory_region_add_subregion(system_memory, cxl_base, mr);
-          cxl_resv_end = cxl_base + cxl_size;
-@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
-                  memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, 
-fw,
-                                        "cxl-fixed-memory-region", fw->size);
-                  memory_region_add_subregion(system_memory, fw->base, &fw->mr);
-Or will this be subregion of cxl_base?
-
-Thanks,
-Pankaj
--                e820_add_entry(fw->base, fw->size, E820_RESERVED);
-                  cxl_fmw_base += fw->size;
-                  cxl_resv_end = cxl_fmw_base;
-              }
-
->
-> -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
->           memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
->
->           memory_region_add_subregion(system_memory, cxl_base, mr);
->
->           cxl_resv_end = cxl_base + cxl_size;
->
-> @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
->
->                   memory_region_init_io(&fw->mr, OBJECT(machine),
->
-> &cfmws_ops, fw,
->
->                                         "cxl-fixed-memory-region",
->
-> fw->size);
->
->                   memory_region_add_subregion(system_memory, fw->base,
->
-> &fw->mr);
->
->
-Or will this be subregion of cxl_base?
->
->
-Thanks,
->
-Pankaj
-The memory region backing this memory area still has to be initialized
-and added in the QEMU system, but it will now be initialized for use by
-linux after PCI/ACPI setup occurs and the CXL driver discovers it via
-CDAT.
-
-It's also still possible to assign this area a static memory region at
-bool by setting up the SRATs in the ACPI tables, but that patch is not
-upstream yet.
-
-On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <gourry.memverge@gmail.com> wrote:
->
->
-Early-boot e820 records will be inserted by the bios/efi/early boot
->
-software and be reported to the kernel via insert_resource.  Later, when
->
-CXL drivers iterate through the regions again, they will insert another
->
-resource and make the RESERVED memory area a child.
-I have already sent a patch
-https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
-.
-When the patch is applied, there would not be any reserved entries
-even with passing E820_RESERVED .
-So this patch needs to be evaluated in the light of the above patch I
-sent. Once you apply my patch, does the issue still exist?
-
->
->
-This RESERVED memory area causes the memory region to become unusable,
->
-and as a result attempting to create memory regions with
->
->
-`cxl create-region ...`
->
->
-Will fail due to the RESERVED area intersecting with the CXL window.
->
->
->
-During boot the following traceback is observed:
->
->
-0xffffffff81101650 in insert_resource_expand_to_fit ()
->
-0xffffffff83d964c5 in e820__reserve_resources_late ()
->
-0xffffffff83e03210 in pcibios_resource_survey ()
->
-0xffffffff83e04f4a in pcibios_init ()
->
->
-Which produces a call to reserve the CFMWS area:
->
->
-(gdb) p *new
->
-$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
->
-flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
->
-child = 0x0}
->
->
-Later the Kernel parses ACPI tables and reserves the exact same area as
->
-the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
->
-retains the RESERVED region and makes it a child of the new region.
->
->
-0xffffffff811016a4 in insert_resource_conflict ()
->
-insert_resource ()
->
-0xffffffff81a81389 in cxl_parse_cfmws ()
->
-0xffffffff818c4a81 in call_handler ()
->
-acpi_parse_entries_array ()
->
->
-(gdb) p/x *new
->
-$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
->
-flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
->
-child = 0x0}
->
->
-This produces the following output in /proc/iomem:
->
->
-590000000-68fffffff : CXL Window 0
->
-590000000-68fffffff : Reserved
->
->
-This reserved area causes `get_free_mem_region()` to fail due to a check
->
-against `__region_intersects()`.  Due to this reserved area, the
->
-intersect check will only ever return REGION_INTERSECTS, which causes
->
-`cxl create-region` to always fail.
->
->
-Signed-off-by: Gregory Price <gregory.price@memverge.com>
->
----
->
-hw/i386/pc.c | 2 --
->
-1 file changed, 2 deletions(-)
->
->
-diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
-index 566accf7e6..5bf5465a21 100644
->
---- a/hw/i386/pc.c
->
-+++ b/hw/i386/pc.c
->
-@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-hwaddr cxl_size = MiB;
->
->
-cxl_base = pc_get_cxl_range_start(pcms);
->
--        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
-memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
->
-memory_region_add_subregion(system_memory, cxl_base, mr);
->
-cxl_resv_end = cxl_base + cxl_size;
->
-@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops,
->
-fw,
->
-"cxl-fixed-memory-region", fw->size);
->
-memory_region_add_subregion(system_memory, fw->base,
->
-&fw->mr);
->
--                e820_add_entry(fw->base, fw->size, E820_RESERVED);
->
-cxl_fmw_base += fw->size;
->
-cxl_resv_end = cxl_fmw_base;
->
-}
->
---
->
-2.37.3
->
-
-This patch does not resolve the issue, reserved entries are still created.
-[    0.000000] BIOS-e820: [mem 0x0000000280000000-0x00000002800fffff] reserved
-[    0.000000] BIOS-e820: [mem 0x0000000290000000-0x000000029fffffff] reserved
-# cat /proc/iomem
-290000000-29fffffff : CXL Window 0
-  290000000-29fffffff : Reserved
-# cxl create-region -m -d decoder0.0 -w 1 -g 256 mem0
-cxl region: create_region: region0: set_size failed: Numerical result out of range
-cxl region: cmd_create_region: created 0 regions
-On Tue, Oct 18, 2022 at 2:05 AM Ani Sinha <
-ani@anisinha.ca
-> wrote:
-On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <
-gourry.memverge@gmail.com
-> wrote:
->
-> Early-boot e820 records will be inserted by the bios/efi/early boot
-> software and be reported to the kernel via insert_resource.  Later, when
-> CXL drivers iterate through the regions again, they will insert another
-> resource and make the RESERVED memory area a child.
-I have already sent a patch
-https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
-.
-When the patch is applied, there would not be any reserved entries
-even with passing E820_RESERVED .
-So this patch needs to be evaluated in the light of the above patch I
-sent. Once you apply my patch, does the issue still exist?
->
-> This RESERVED memory area causes the memory region to become unusable,
-> and as a result attempting to create memory regions with
->
->     `cxl create-region ...`
->
-> Will fail due to the RESERVED area intersecting with the CXL window.
->
->
-> During boot the following traceback is observed:
->
-> 0xffffffff81101650 in insert_resource_expand_to_fit ()
-> 0xffffffff83d964c5 in e820__reserve_resources_late ()
-> 0xffffffff83e03210 in pcibios_resource_survey ()
-> 0xffffffff83e04f4a in pcibios_init ()
->
-> Which produces a call to reserve the CFMWS area:
->
-> (gdb) p *new
-> $54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
->        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
->        child = 0x0}
->
-> Later the Kernel parses ACPI tables and reserves the exact same area as
-> the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
-> retains the RESERVED region and makes it a child of the new region.
->
-> 0xffffffff811016a4 in insert_resource_conflict ()
->                       insert_resource ()
-> 0xffffffff81a81389 in cxl_parse_cfmws ()
-> 0xffffffff818c4a81 in call_handler ()
->                       acpi_parse_entries_array ()
->
-> (gdb) p/x *new
-> $59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
->        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
->        child = 0x0}
->
-> This produces the following output in /proc/iomem:
->
-> 590000000-68fffffff : CXL Window 0
->   590000000-68fffffff : Reserved
->
-> This reserved area causes `get_free_mem_region()` to fail due to a check
-> against `__region_intersects()`.  Due to this reserved area, the
-> intersect check will only ever return REGION_INTERSECTS, which causes
-> `cxl create-region` to always fail.
->
-> Signed-off-by: Gregory Price <
-gregory.price@memverge.com
->
-> ---
->  hw/i386/pc.c | 2 --
->  1 file changed, 2 deletions(-)
->
-> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
-> index 566accf7e6..5bf5465a21 100644
-> --- a/hw/i386/pc.c
-> +++ b/hw/i386/pc.c
-> @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->          hwaddr cxl_size = MiB;
->
->          cxl_base = pc_get_cxl_range_start(pcms);
-> -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
->          memory_region_add_subregion(system_memory, cxl_base, mr);
->          cxl_resv_end = cxl_base + cxl_size;
-> @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
->                  memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
->                                        "cxl-fixed-memory-region", fw->size);
->                  memory_region_add_subregion(system_memory, fw->base, &fw->mr);
-> -                e820_add_entry(fw->base, fw->size, E820_RESERVED);
->                  cxl_fmw_base += fw->size;
->                  cxl_resv_end = cxl_fmw_base;
->              }
-> --
-> 2.37.3
->
-
-+Gerd Hoffmann
-
-On Tue, Oct 18, 2022 at 8:16 PM Gregory Price <gourry.memverge@gmail.com> wrote:
->
->
-This patch does not resolve the issue, reserved entries are still created.
->
->
-[    0.000000] BIOS-e820: [mem 0x0000000280000000-0x00000002800fffff] reserved
->
-[    0.000000] BIOS-e820: [mem 0x0000000290000000-0x000000029fffffff] reserved
->
->
-# cat /proc/iomem
->
-290000000-29fffffff : CXL Window 0
->
-290000000-29fffffff : Reserved
->
->
-# cxl create-region -m -d decoder0.0 -w 1 -g 256 mem0
->
-cxl region: create_region: region0: set_size failed: Numerical result out of
->
-range
->
-cxl region: cmd_create_region: created 0 regions
->
->
-On Tue, Oct 18, 2022 at 2:05 AM Ani Sinha <ani@anisinha.ca> wrote:
->
->
->
-> On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <gourry.memverge@gmail.com>
->
-> wrote:
->
-> >
->
-> > Early-boot e820 records will be inserted by the bios/efi/early boot
->
-> > software and be reported to the kernel via insert_resource.  Later, when
->
-> > CXL drivers iterate through the regions again, they will insert another
->
-> > resource and make the RESERVED memory area a child.
->
->
->
-> I have already sent a patch
->
->
-https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
-.
->
-> When the patch is applied, there would not be any reserved entries
->
-> even with passing E820_RESERVED .
->
-> So this patch needs to be evaluated in the light of the above patch I
->
-> sent. Once you apply my patch, does the issue still exist?
->
->
->
-> >
->
-> > This RESERVED memory area causes the memory region to become unusable,
->
-> > and as a result attempting to create memory regions with
->
-> >
->
-> >     `cxl create-region ...`
->
-> >
->
-> > Will fail due to the RESERVED area intersecting with the CXL window.
->
-> >
->
-> >
->
-> > During boot the following traceback is observed:
->
-> >
->
-> > 0xffffffff81101650 in insert_resource_expand_to_fit ()
->
-> > 0xffffffff83d964c5 in e820__reserve_resources_late ()
->
-> > 0xffffffff83e03210 in pcibios_resource_survey ()
->
-> > 0xffffffff83e04f4a in pcibios_init ()
->
-> >
->
-> > Which produces a call to reserve the CFMWS area:
->
-> >
->
-> > (gdb) p *new
->
-> > $54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
->
-> >        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
->
-> >        child = 0x0}
->
-> >
->
-> > Later the Kernel parses ACPI tables and reserves the exact same area as
->
-> > the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
->
-> > retains the RESERVED region and makes it a child of the new region.
->
-> >
->
-> > 0xffffffff811016a4 in insert_resource_conflict ()
->
-> >                       insert_resource ()
->
-> > 0xffffffff81a81389 in cxl_parse_cfmws ()
->
-> > 0xffffffff818c4a81 in call_handler ()
->
-> >                       acpi_parse_entries_array ()
->
-> >
->
-> > (gdb) p/x *new
->
-> > $59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
->
-> >        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
->
-> >        child = 0x0}
->
-> >
->
-> > This produces the following output in /proc/iomem:
->
-> >
->
-> > 590000000-68fffffff : CXL Window 0
->
-> >   590000000-68fffffff : Reserved
->
-> >
->
-> > This reserved area causes `get_free_mem_region()` to fail due to a check
->
-> > against `__region_intersects()`.  Due to this reserved area, the
->
-> > intersect check will only ever return REGION_INTERSECTS, which causes
->
-> > `cxl create-region` to always fail.
->
-> >
->
-> > Signed-off-by: Gregory Price <gregory.price@memverge.com>
->
-> > ---
->
-> >  hw/i386/pc.c | 2 --
->
-> >  1 file changed, 2 deletions(-)
->
-> >
->
-> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
-> > index 566accf7e6..5bf5465a21 100644
->
-> > --- a/hw/i386/pc.c
->
-> > +++ b/hw/i386/pc.c
->
-> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-> >          hwaddr cxl_size = MiB;
->
-> >
->
-> >          cxl_base = pc_get_cxl_range_start(pcms);
->
-> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
-> >          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
->
-> >          memory_region_add_subregion(system_memory, cxl_base, mr);
->
-> >          cxl_resv_end = cxl_base + cxl_size;
->
-> > @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-> >                  memory_region_init_io(&fw->mr, OBJECT(machine),
->
-> > &cfmws_ops, fw,
->
-> >                                        "cxl-fixed-memory-region",
->
-> > fw->size);
->
-> >                  memory_region_add_subregion(system_memory, fw->base,
->
-> > &fw->mr);
->
-> > -                e820_add_entry(fw->base, fw->size, E820_RESERVED);
->
-> >                  cxl_fmw_base += fw->size;
->
-> >                  cxl_resv_end = cxl_fmw_base;
->
-> >              }
->
-> > --
->
-> > 2.37.3
->
-> >
-
->
->> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
->> > index 566accf7e6..5bf5465a21 100644
->
->> > --- a/hw/i386/pc.c
->
->> > +++ b/hw/i386/pc.c
->
->> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
->> >          hwaddr cxl_size = MiB;
->
->> >
->
->> >          cxl_base = pc_get_cxl_range_start(pcms);
->
->> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
-Just dropping it doesn't look like a good plan to me.
-
-You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
-(both seabios and ovmf) read it and will make sure the 64bit pci mmio
-window is placed above that address, i.e. this effectively reserves
-address space.  Right now used by memory hotplug code, but should work
-for cxl too I think (disclaimer: don't know much about cxl ...).
-
-take care & HTH,
-  Gerd
-
-On Tue, 8 Nov 2022 12:21:11 +0100
-Gerd Hoffmann <kraxel@redhat.com> wrote:
-
->
-> >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
-> >> > index 566accf7e6..5bf5465a21 100644
->
-> >> > --- a/hw/i386/pc.c
->
-> >> > +++ b/hw/i386/pc.c
->
-> >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-> >> >          hwaddr cxl_size = MiB;
->
-> >> >
->
-> >> >          cxl_base = pc_get_cxl_range_start(pcms);
->
-> >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
->
-Just dropping it doesn't look like a good plan to me.
->
->
-You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
->
-(both seabios and ovmf) read it and will make sure the 64bit pci mmio
->
-window is placed above that address, i.e. this effectively reserves
->
-address space.  Right now used by memory hotplug code, but should work
->
-for cxl too I think (disclaimer: don't know much about cxl ...).
-As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
-at all, it' has its own mapping.
-
-Regardless of that, reserved E820 entries look wrong, and looking at
-commit message OS is right to bailout on them (expected according
-to ACPI spec).
-Also spec says 
-
-"
-E820 Assumptions and Limitations
- [...]
- The platform boot firmware does not return a range description for the memory 
-mapping of
- PCI devices, ISA Option ROMs, and ISA Plug and Play cards because the OS has 
-mechanisms
- available to detect them.
-"
-
-so dropping reserved entries looks reasonable from ACPI spec point of view.
-(disclaimer: don't know much about cxl ... either)
->
->
-take care & HTH,
->
-Gerd
->
-
-On Fri, Nov 11, 2022 at 11:51:23AM +0100, Igor Mammedov wrote:
->
-On Tue, 8 Nov 2022 12:21:11 +0100
->
-Gerd Hoffmann <kraxel@redhat.com> wrote:
->
->
-> > >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
-> > >> > index 566accf7e6..5bf5465a21 100644
->
-> > >> > --- a/hw/i386/pc.c
->
-> > >> > +++ b/hw/i386/pc.c
->
-> > >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-> > >> >          hwaddr cxl_size = MiB;
->
-> > >> >
->
-> > >> >          cxl_base = pc_get_cxl_range_start(pcms);
->
-> > >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
->
->
-> Just dropping it doesn't look like a good plan to me.
->
->
->
-> You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
->
-> (both seabios and ovmf) read it and will make sure the 64bit pci mmio
->
-> window is placed above that address, i.e. this effectively reserves
->
-> address space.  Right now used by memory hotplug code, but should work
->
-> for cxl too I think (disclaimer: don't know much about cxl ...).
->
->
-As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
->
-at all, it' has its own mapping.
-This should be changed.  cxl should make sure the highest address used
-is stored in etc/reserved-memory-end to avoid the firmware mapping pci
-resources there.
-
->
-so dropping reserved entries looks reasonable from ACPI spec point of view.
-Yep, I don't want dispute that.
-
-I suspect the reason for these entries to exist in the first place is to
-inform the firmware that it should not place stuff there, and if we
-remove that to conform with the spec we need some alternative way for
-that ...
-
-take care,
-  Gerd
-
-On Fri, 11 Nov 2022 12:40:59 +0100
-Gerd Hoffmann <kraxel@redhat.com> wrote:
-
->
-On Fri, Nov 11, 2022 at 11:51:23AM +0100, Igor Mammedov wrote:
->
-> On Tue, 8 Nov 2022 12:21:11 +0100
->
-> Gerd Hoffmann <kraxel@redhat.com> wrote:
->
->
->
-> > > >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
->
-> > > >> > index 566accf7e6..5bf5465a21 100644
->
-> > > >> > --- a/hw/i386/pc.c
->
-> > > >> > +++ b/hw/i386/pc.c
->
-> > > >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
->
-> > > >> >          hwaddr cxl_size = MiB;
->
-> > > >> >
->
-> > > >> >          cxl_base = pc_get_cxl_range_start(pcms);
->
-> > > >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
->
-> >
->
-> > Just dropping it doesn't look like a good plan to me.
->
-> >
->
-> > You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
->
-> > (both seabios and ovmf) read it and will make sure the 64bit pci mmio
->
-> > window is placed above that address, i.e. this effectively reserves
->
-> > address space.  Right now used by memory hotplug code, but should work
->
-> > for cxl too I think (disclaimer: don't know much about cxl ...).
->
->
->
-> As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
->
-> at all, it' has its own mapping.
->
->
-This should be changed.  cxl should make sure the highest address used
->
-is stored in etc/reserved-memory-end to avoid the firmware mapping pci
->
-resources there.
-if (pcmc->has_reserved_memory && machine->device_memory->base) {            
- 
-[...]
-                                                             
-        if (pcms->cxl_devices_state.is_enabled) {                               
- 
-            res_mem_end = cxl_resv_end;
-
-that should be handled by this line
-
-        }                                   
-                                     
-        *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));                     
- 
-        fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));  
- 
-    }  
-
-so SeaBIOS shouldn't intrude into CXL address space
-(I assume EDK2 behave similarly here)
- 
->
-> so dropping reserved entries looks reasonable from ACPI spec point of view.
->
->
->
->
-Yep, I don't want dispute that.
->
->
-I suspect the reason for these entries to exist in the first place is to
->
-inform the firmware that it should not place stuff there, and if we
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-just to educate me, can you point out what SeaBIOS code does with reservations.
-
->
-remove that to conform with the spec we need some alternative way for
->
-that ...
-with etc/reserved-memory-end set as above,
-is E820_RESERVED really needed here?
-
-(my understanding was that E820_RESERVED weren't accounted for when
-initializing PCI devices)
-
->
->
-take care,
->
-Gerd
->
-
->
-if (pcmc->has_reserved_memory && machine->device_memory->base) {
->
->
-[...]
->
->
-if (pcms->cxl_devices_state.is_enabled) {
->
->
-res_mem_end = cxl_resv_end;
->
->
-that should be handled by this line
->
->
-}
->
->
-*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
->
->
-fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val,
->
-sizeof(*val));
->
-}
->
->
-so SeaBIOS shouldn't intrude into CXL address space
-Yes, looks good, so with this in place already everyting should be fine.
-
->
-(I assume EDK2 behave similarly here)
-Correct, ovmf reads that fw_cfg file too.
-
->
-> I suspect the reason for these entries to exist in the first place is to
->
-> inform the firmware that it should not place stuff there, and if we
->
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
->
-just to educate me, can you point out what SeaBIOS code does with
->
-reservations.
-They are added to the e820 map which gets passed on to the OS.  seabios
-uses (and updateas) the e820 map too, when allocating memory for
-example.  While thinking about it I'm not fully sure it actually looks
-at reservations, maybe it only uses (and updates) ram entries when
-allocating memory.
-
->
-> remove that to conform with the spec we need some alternative way for
->
-> that ...
->
->
-with etc/reserved-memory-end set as above,
->
-is E820_RESERVED really needed here?
-No.  Setting etc/reserved-memory-end is enough.
-
-So for the original patch:
-Acked-by: Gerd Hoffmann <kraxel@redhat.com>
-
-take care,
-  Gerd
-
-On Fri, Nov 11, 2022 at 02:36:02PM +0100, Gerd Hoffmann wrote:
->
->     if (pcmc->has_reserved_memory && machine->device_memory->base) {
->
->
->
-> [...]
->
->
->
->         if (pcms->cxl_devices_state.is_enabled) {
->
->
->
->             res_mem_end = cxl_resv_end;
->
->
->
-> that should be handled by this line
->
->
->
->         }
->
->
->
->         *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
->
->
->
->         fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val,
->
-> sizeof(*val));
->
->     }
->
->
->
-> so SeaBIOS shouldn't intrude into CXL address space
->
->
-Yes, looks good, so with this in place already everyting should be fine.
->
->
-> (I assume EDK2 behave similarly here)
->
->
-Correct, ovmf reads that fw_cfg file too.
->
->
-> > I suspect the reason for these entries to exist in the first place is to
->
-> > inform the firmware that it should not place stuff there, and if we
->
->        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
->
-> just to educate me, can you point out what SeaBIOS code does with
->
-> reservations.
->
->
-They are added to the e820 map which gets passed on to the OS.  seabios
->
-uses (and updateas) the e820 map too, when allocating memory for
->
-example.  While thinking about it I'm not fully sure it actually looks
->
-at reservations, maybe it only uses (and updates) ram entries when
->
-allocating memory.
->
->
-> > remove that to conform with the spec we need some alternative way for
->
-> > that ...
->
->
->
-> with etc/reserved-memory-end set as above,
->
-> is E820_RESERVED really needed here?
->
->
-No.  Setting etc/reserved-memory-end is enough.
->
->
-So for the original patch:
->
-Acked-by: Gerd Hoffmann <kraxel@redhat.com>
->
->
-take care,
->
-Gerd
-It's upstream already, sorry I can't add your tag.
-
--- 
-MST
-
diff --git a/results/classifier/005/instruction/50773216 b/results/classifier/005/instruction/50773216
deleted file mode 100644
index 1b6ac4ad..00000000
--- a/results/classifier/005/instruction/50773216
+++ /dev/null
@@ -1,118 +0,0 @@
-instruction: 0.768
-device: 0.764
-other: 0.737
-graphic: 0.723
-semantic: 0.669
-vnc: 0.656
-socket: 0.652
-mistranslation: 0.652
-boot: 0.637
-assembly: 0.623
-network: 0.606
-KVM: 0.601
-
-[Qemu-devel] Can I have someone's feedback on [bug 1809075] Concurrency bug on keyboard events: capslock LED messing up keycode streams causes character misses at guest kernel
-
-Hi everyone.
-Can I please have someone's feedback on this bug?
-https://bugs.launchpad.net/qemu/+bug/1809075
-Briefly, guest OS loses characters sent to it via vnc. And I spot the
-bug in relation to ps2 driver.
-I'm thinking of possible fixes and I might want to use a memory barrier.
-But I would really like to have some suggestion from a qemu developer
-first. For example, can we brutally drop capslock LED key events in ps2
-queue?
-It is actually relevant to openQA, an automated QA tool for openSUSE.
-And this bug blocks a few test cases for us.
-Thank you in advance!
-
-Kind regards,
-Gao Zhiyuan
-
-Cc'ing Marc-André & Gerd.
-
-On 12/19/18 10:31 AM, Gao Zhiyuan wrote:
->
-Hi everyone.
->
->
-Can I please have someone's feedback on this bug?
->
-https://bugs.launchpad.net/qemu/+bug/1809075
->
-Briefly, guest OS loses characters sent to it via vnc. And I spot the
->
-bug in relation to ps2 driver.
->
->
-I'm thinking of possible fixes and I might want to use a memory barrier.
->
-But I would really like to have some suggestion from a qemu developer
->
-first. For example, can we brutally drop capslock LED key events in ps2
->
-queue?
->
->
-It is actually relevant to openQA, an automated QA tool for openSUSE.
->
-And this bug blocks a few test cases for us.
->
->
-Thank you in advance!
->
->
-Kind regards,
->
-Gao Zhiyuan
->
-
-On Thu, Jan 03, 2019 at 12:05:54PM +0100, Philippe Mathieu-Daudé wrote:
->
-Cc'ing Marc-André & Gerd.
->
->
-On 12/19/18 10:31 AM, Gao Zhiyuan wrote:
->
-> Hi everyone.
->
->
->
-> Can I please have someone's feedback on this bug?
->
->
-https://bugs.launchpad.net/qemu/+bug/1809075
->
-> Briefly, guest OS loses characters sent to it via vnc. And I spot the
->
-> bug in relation to ps2 driver.
->
->
->
-> I'm thinking of possible fixes and I might want to use a memory barrier.
->
-> But I would really like to have some suggestion from a qemu developer
->
-> first. For example, can we brutally drop capslock LED key events in ps2
->
-> queue?
-There is no "capslock LED key event".  0xfa is KBD_REPLY_ACK, and the
-device queues it in response to guest port writes.  Yes, the ack can
-race with actual key events.  But IMO that isn't a bug in qemu.
-
-Probably the linux kernel just throws away everything until it got the
-ack for the port write, and that way the key event gets lost.  On
-physical hardware you will not notice because it is next to impossible
-to type fast enough to hit the race window.
-
-So, go fix the kernel.
-
-Alternatively fix vncdotool to send uppercase letters properly with
-shift key pressed.  Then qemu wouldn't generate capslock key events
-(that happens because qemu thinks guest and host capslock state is out
-of sync) and the guests's capslock led update request wouldn't get into
-the way.
-
-cheers,
-  Gerd
-
diff --git a/results/classifier/005/instruction/63565653 b/results/classifier/005/instruction/63565653
deleted file mode 100644
index ddd5e5b1..00000000
--- a/results/classifier/005/instruction/63565653
+++ /dev/null
@@ -1,57 +0,0 @@
-instruction: 0.905
-other: 0.898
-device: 0.889
-boot: 0.889
-network: 0.861
-KVM: 0.827
-semantic: 0.825
-socket: 0.745
-graphic: 0.735
-vnc: 0.588
-assembly: 0.571
-mistranslation: 0.462
-
-[Qemu-devel] [BUG]pcibus_reset assertion failure on guest reboot
-
-Qemu-2.6.2
-
-Start a vm with vhost-net , do reboot and hot-unplug viritio-net nic in short 
-time, we touch 
-pcibus_reset assertion failure.
-
-Here is qemu log:
-22:29:46.359386+08:00  acpi_pm1_cnt_write -> guest do soft power off
-22:29:46.785310+08:00  qemu_devices_reset
-22:29:46.788093+08:00  virtio_pci_device_unplugged -> virtio net unpluged
-22:29:46.803427+08:00  pcibus_reset: Assertion `bus->irq_count[i] == 0' failed.
-
-Here is stack info: 
-(gdb) bt
-#0  0x00007f9a336795d7 in raise () from /usr/lib64/libc.so.6
-#1  0x00007f9a3367acc8 in abort () from /usr/lib64/libc.so.6
-#2  0x00007f9a33672546 in __assert_fail_base () from /usr/lib64/libc.so.6
-#3  0x00007f9a336725f2 in __assert_fail () from /usr/lib64/libc.so.6
-#4  0x0000000000641884 in pcibus_reset (qbus=0x29eee60) at hw/pci/pci.c:283
-#5  0x00000000005bfc30 in qbus_reset_one (bus=0x29eee60, opaque=<optimized 
-out>) at hw/core/qdev.c:319
-#6  0x00000000005c1b19 in qdev_walk_children (dev=0x29ed2b0, pre_devfn=0x0, 
-pre_busfn=0x0, post_devfn=0x5c2440 ...
-#7  0x00000000005c1c59 in qbus_walk_children (bus=0x2736f80, pre_devfn=0x0, 
-pre_busfn=0x0, post_devfn=0x5c2440 ...
-#8  0x00000000005513f5 in qemu_devices_reset () at vl.c:1998
-#9  0x00000000004cab9d in pc_machine_reset () at 
-/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/i386/pc.c:1976
-#10 0x000000000055148b in qemu_system_reset (address@hidden) at vl.c:2011
-#11 0x000000000055164f in main_loop_should_exit () at vl.c:2169
-#12 0x0000000000551719 in main_loop () at vl.c:2212
-#13 0x000000000041c9a8 in main (argc=<optimized out>, argv=<optimized out>, 
-envp=<optimized out>) at vl.c:5130
-(gdb) f 4
-...
-(gdb) p bus->irq_count[0]
-$6 = 1
-
-Seems pci_update_irq_disabled doesn't work well
-
-can anyone help?
-
diff --git a/results/classifier/005/instruction/70868267 b/results/classifier/005/instruction/70868267
deleted file mode 100644
index 1fd40dec..00000000
--- a/results/classifier/005/instruction/70868267
+++ /dev/null
@@ -1,48 +0,0 @@
-instruction: 0.778
-graphic: 0.706
-device: 0.643
-semantic: 0.635
-mistranslation: 0.537
-socket: 0.418
-network: 0.411
-assembly: 0.240
-other: 0.236
-vnc: 0.227
-boot: 0.197
-KVM: 0.167
-
-[Qemu-devel] [BUG] Failed to compile using gcc7.1
-
-Hi all,
-
-After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
-
-The error is:
-
-------
-  CC      block/blkdebug.o
-block/blkdebug.c: In function 'blkdebug_refresh_filename':
-block/blkdebug.c:693:31: error: '%s' directive output may be truncated
-writing up to 4095 bytes into a region of size 4086
-[-Werror=format-truncation=]
-"blkdebug:%s:%s", s->config_file ?: "",
-                               ^~
-In file included from /usr/include/stdio.h:939:0,
-                 from /home/adam/qemu/include/qemu/osdep.h:68,
-                 from block/blkdebug.c:25:
-/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk'
-output 11 or more bytes (assuming 4106) into a destination of size 4096
-return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
-          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-        __bos (__s), __fmt, __va_arg_pack ());
-        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-cc1: all warnings being treated as errors
-make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
-------
-
-It seems that gcc 7 is introducing more restrict check for printf.
-If using clang, although there are some extra warning, it can at least
-pass the compile.
-Thanks,
-Qu
-
diff --git a/results/classifier/005/mistranslation/14887122 b/results/classifier/005/mistranslation/14887122
deleted file mode 100644
index 1a87937b..00000000
--- a/results/classifier/005/mistranslation/14887122
+++ /dev/null
@@ -1,266 +0,0 @@
-mistranslation: 0.930
-semantic: 0.928
-device: 0.919
-assembly: 0.918
-socket: 0.914
-graphic: 0.910
-instruction: 0.905
-other: 0.890
-vnc: 0.871
-network: 0.855
-boot: 0.831
-KVM: 0.814
-
-[BUG][RFC] CPR transfer Issues: Socket permissions and PID files
-
-Hello,
-
-While testing CPR transfer I encountered two issues. The first is that the 
-transfer fails when running with pidfiles due to the destination qemu process 
-attempting to create the pidfile while it is still locked by the source 
-process. The second is that the transfer fails when running with the -run-with 
-user=$USERID parameter. This is because the destination qemu process creates 
-the UNIX sockets used for the CPR transfer before dropping to the lower 
-permissioned user, which causes them to be owned by the original user. The 
-source qemu process then does not have permission to connect to it because it 
-is already running as the lesser permissioned user.
-
-Reproducing the first issue:
-
-Create a source and destination qemu instance associated with the same VM where 
-both processes have the -pidfile parameter passed on the command line. You 
-should see the following error on the command line of the second process:
-
-qemu-system-x86_64: cannot create PID file: Cannot lock pid file: Resource 
-temporarily unavailable
-
-Reproducing the second issue:
-
-Create a source and destination qemu instance associated with the same VM where 
-both processes have -run-with user=$USERID passed on the command line, where 
-$USERID is a different user from the one launching the processes. Then attempt 
-a CPR transfer using UNIX sockets for the main and cpr sockets. You should 
-receive the following error via QMP:
-{"error": {"class": "GenericError", "desc": "Failed to connect to 'cpr.sock': 
-Permission denied"}}
-
-I provided a minimal patch that works around the second issue.
-
-Thank you,
-Ben Chaney
-
----
-include/system/os-posix.h | 4 ++++
-os-posix.c | 8 --------
-util/qemu-sockets.c | 21 +++++++++++++++++++++
-3 files changed, 25 insertions(+), 8 deletions(-)
-
-diff --git a/include/system/os-posix.h b/include/system/os-posix.h
-index ce5b3bccf8..2a414a914a 100644
---- a/include/system/os-posix.h
-+++ b/include/system/os-posix.h
-@@ -55,6 +55,10 @@ void os_setup_limits(void);
-void os_setup_post(void);
-int os_mlock(bool on_fault);
-
-+extern struct passwd *user_pwd;
-+extern uid_t user_uid;
-+extern gid_t user_gid;
-+
-/**
-* qemu_alloc_stack:
-* @sz: pointer to a size_t holding the requested usable stack size
-diff --git a/os-posix.c b/os-posix.c
-index 52925c23d3..9369b312a0 100644
---- a/os-posix.c
-+++ b/os-posix.c
-@@ -86,14 +86,6 @@ void os_set_proc_name(const char *s)
-}
-
-
--/*
-- * Must set all three of these at once.
-- * Legal combinations are unset by name by uid
-- */
--static struct passwd *user_pwd; /* NULL non-NULL NULL */
--static uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
--static gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
--
-/*
-* Prepare to change user ID. user_id can be one of 3 forms:
-* - a username, in which case user ID will be changed to its uid,
-diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
-index 77477c1cd5..987977ead9 100644
---- a/util/qemu-sockets.c
-+++ b/util/qemu-sockets.c
-@@ -871,6 +871,14 @@ static bool saddr_is_tight(UnixSocketAddress *saddr)
-#endif
-}
-
-+/*
-+ * Must set all three of these at once.
-+ * Legal combinations are unset by name by uid
-+ */
-+struct passwd *user_pwd; /* NULL non-NULL NULL */
-+uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
-+gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
-+
-static int unix_listen_saddr(UnixSocketAddress *saddr,
-int num,
-Error **errp)
-@@ -947,6 +955,19 @@ static int unix_listen_saddr(UnixSocketAddress *saddr,
-error_setg_errno(errp, errno, "Failed to bind socket to %s", path);
-goto err;
-}
-+ if (user_pwd) {
-+ if (chown(un.sun_path, user_pwd->pw_uid, user_pwd->pw_gid) < 0) {
-+ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
-path);
-+ goto err;
-+ }
-+ }
-+ else if (user_uid != -1 && user_gid != -1) {
-+ if (chown(un.sun_path, user_uid, user_gid) < 0) {
-+ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
-path);
-+ goto err;
-+ }
-+ }
-+
-if (listen(sock, num) < 0) {
-error_setg_errno(errp, errno, "Failed to listen on socket");
-goto err;
---
-2.40.1
-
-Thank you Ben.  I appreciate you testing CPR and shaking out the bugs.
-I will study these and propose patches.
-
-My initial reaction to the pidfile issue is that the orchestration layer must
-pass a different filename when starting the destination qemu instance.  When
-using live update without containers, these types of resource conflicts in the
-global namespaces are a known issue.
-
-- Steve
-
-On 3/14/2025 2:33 PM, Chaney, Ben wrote:
-Hello,
-
-While testing CPR transfer I encountered two issues. The first is that the 
-transfer fails when running with pidfiles due to the destination qemu process 
-attempting to create the pidfile while it is still locked by the source 
-process. The second is that the transfer fails when running with the -run-with 
-user=$USERID parameter. This is because the destination qemu process creates 
-the UNIX sockets used for the CPR transfer before dropping to the lower 
-permissioned user, which causes them to be owned by the original user. The 
-source qemu process then does not have permission to connect to it because it 
-is already running as the lesser permissioned user.
-
-Reproducing the first issue:
-
-Create a source and destination qemu instance associated with the same VM where 
-both processes have the -pidfile parameter passed on the command line. You 
-should see the following error on the command line of the second process:
-
-qemu-system-x86_64: cannot create PID file: Cannot lock pid file: Resource 
-temporarily unavailable
-
-Reproducing the second issue:
-
-Create a source and destination qemu instance associated with the same VM where 
-both processes have -run-with user=$USERID passed on the command line, where 
-$USERID is a different user from the one launching the processes. Then attempt 
-a CPR transfer using UNIX sockets for the main and cpr sockets. You should 
-receive the following error via QMP:
-{"error": {"class": "GenericError", "desc": "Failed to connect to 'cpr.sock': 
-Permission denied"}}
-
-I provided a minimal patch that works around the second issue.
-
-Thank you,
-Ben Chaney
-
----
-include/system/os-posix.h | 4 ++++
-os-posix.c | 8 --------
-util/qemu-sockets.c | 21 +++++++++++++++++++++
-3 files changed, 25 insertions(+), 8 deletions(-)
-
-diff --git a/include/system/os-posix.h b/include/system/os-posix.h
-index ce5b3bccf8..2a414a914a 100644
---- a/include/system/os-posix.h
-+++ b/include/system/os-posix.h
-@@ -55,6 +55,10 @@ void os_setup_limits(void);
-void os_setup_post(void);
-int os_mlock(bool on_fault);
-
-+extern struct passwd *user_pwd;
-+extern uid_t user_uid;
-+extern gid_t user_gid;
-+
-/**
-* qemu_alloc_stack:
-* @sz: pointer to a size_t holding the requested usable stack size
-diff --git a/os-posix.c b/os-posix.c
-index 52925c23d3..9369b312a0 100644
---- a/os-posix.c
-+++ b/os-posix.c
-@@ -86,14 +86,6 @@ void os_set_proc_name(const char *s)
-}
-
-
--/*
-- * Must set all three of these at once.
-- * Legal combinations are unset by name by uid
-- */
--static struct passwd *user_pwd; /* NULL non-NULL NULL */
--static uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
--static gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
--
-/*
-* Prepare to change user ID. user_id can be one of 3 forms:
-* - a username, in which case user ID will be changed to its uid,
-diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
-index 77477c1cd5..987977ead9 100644
---- a/util/qemu-sockets.c
-+++ b/util/qemu-sockets.c
-@@ -871,6 +871,14 @@ static bool saddr_is_tight(UnixSocketAddress *saddr)
-#endif
-}
-
-+/*
-+ * Must set all three of these at once.
-+ * Legal combinations are unset by name by uid
-+ */
-+struct passwd *user_pwd; /* NULL non-NULL NULL */
-+uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
-+gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
-+
-static int unix_listen_saddr(UnixSocketAddress *saddr,
-int num,
-Error **errp)
-@@ -947,6 +955,19 @@ static int unix_listen_saddr(UnixSocketAddress *saddr,
-error_setg_errno(errp, errno, "Failed to bind socket to %s", path);
-goto err;
-}
-+ if (user_pwd) {
-+ if (chown(un.sun_path, user_pwd->pw_uid, user_pwd->pw_gid) < 0) {
-+ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
-path);
-+ goto err;
-+ }
-+ }
-+ else if (user_uid != -1 && user_gid != -1) {
-+ if (chown(un.sun_path, user_uid, user_gid) < 0) {
-+ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
-path);
-+ goto err;
-+ }
-+ }
-+
-if (listen(sock, num) < 0) {
-error_setg_errno(errp, errno, "Failed to listen on socket");
-goto err;
---
-2.40.1
-
diff --git a/results/classifier/005/mistranslation/23270873 b/results/classifier/005/mistranslation/23270873
deleted file mode 100644
index 4d8b927f..00000000
--- a/results/classifier/005/mistranslation/23270873
+++ /dev/null
@@ -1,700 +0,0 @@
-mistranslation: 0.881
-other: 0.839
-boot: 0.830
-vnc: 0.820
-device: 0.810
-KVM: 0.803
-assembly: 0.768
-network: 0.768
-graphic: 0.763
-socket: 0.758
-instruction: 0.755
-semantic: 0.752
-
-[Qemu-devel] [BUG?] aio_get_linux_aio: Assertion `ctx->linux_aio' failed
-
-Hi,
-
-I am seeing some strange QEMU assertion failures for qemu on s390x,
-which prevents a guest from starting.
-
-Git bisecting points to the following commit as the source of the error.
-
-commit ed6e2161715c527330f936d44af4c547f25f687e
-Author: Nishanth Aravamudan <address@hidden>
-Date:   Fri Jun 22 12:37:00 2018 -0700
-
-    linux-aio: properly bubble up errors from initialization
-
-    laio_init() can fail for a couple of reasons, which will lead to a NULL
-    pointer dereference in laio_attach_aio_context().
-
-    To solve this, add a aio_setup_linux_aio() function which is called
-    early in raw_open_common. If this fails, propagate the error up. The
-    signature of aio_get_linux_aio() was not modified, because it seems
-    preferable to return the actual errno from the possible failing
-    initialization calls.
-
-    Additionally, when the AioContext changes, we need to associate a
-    LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
-    callback and call the new aio_setup_linux_aio(), which will allocate a
-new AioContext if needed, and return errors on failures. If it
-fails for
-any reason, fallback to threaded AIO with an error message, as the
-    device is already in-use by the guest.
-
-    Add an assert that aio_get_linux_aio() cannot return NULL.
-
-    Signed-off-by: Nishanth Aravamudan <address@hidden>
-    Message-id: address@hidden
-    Signed-off-by: Stefan Hajnoczi <address@hidden>
-Not sure what is causing this assertion to fail. Here is the qemu
-command line of the guest, from qemu log, which throws this error:
-LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
-QEMU_AUDIO_DRV=none /usr/local/bin/qemu-system-s390x -name
-guest=rt_vm1,debug-threads=on -S -object
-secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-21-rt_vm1/master-key.aes
--machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off -m
-1024 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -object
-iothread,id=iothread1 -uuid 0cde16cd-091d-41bd-9ac2-5243df5c9a0d
--display none -no-user-config -nodefaults -chardev
-socket,id=charmonitor,fd=28,server,nowait -mon
-chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
--boot strict=on -drive
-file=/dev/mapper/360050763998b0883980000002a000031,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
--device
-virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,write-cache=on
--netdev tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device
-virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:3a:c8:67:95:84,devno=fe.0.0000
--netdev tap,fd=32,id=hostnet1,vhost=on,vhostfd=33 -device
-virtio-net-ccw,netdev=hostnet1,id=net1,mac=52:54:00:2a:e5:08,devno=fe.0.0002
--chardev pty,id=charconsole0 -device
-sclpconsole,chardev=charconsole0,id=console0 -device
-virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -sandbox
-on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny
--msg timestamp=on
-2018-07-17 15:48:42.252+0000: Domain id=21 is tainted: high-privileges
-2018-07-17T15:48:42.279380Z qemu-system-s390x: -chardev
-pty,id=charconsole0: char device redirected to /dev/pts/3 (label
-charconsole0)
-qemu-system-s390x: util/async.c:339: aio_get_linux_aio: Assertion
-`ctx->linux_aio' failed.
-2018-07-17 15:48:43.309+0000: shutting down, reason=failed
-
-
-Any help debugging this would be greatly appreciated.
-
-Thank you
-Farhan
-
-On 17.07.2018 [13:25:53 -0400], Farhan Ali wrote:
->
-Hi,
->
->
-I am seeing some strange QEMU assertion failures for qemu on s390x,
->
-which prevents a guest from starting.
->
->
-Git bisecting points to the following commit as the source of the error.
->
->
-commit ed6e2161715c527330f936d44af4c547f25f687e
->
-Author: Nishanth Aravamudan <address@hidden>
->
-Date:   Fri Jun 22 12:37:00 2018 -0700
->
->
-linux-aio: properly bubble up errors from initialization
->
->
-laio_init() can fail for a couple of reasons, which will lead to a NULL
->
-pointer dereference in laio_attach_aio_context().
->
->
-To solve this, add a aio_setup_linux_aio() function which is called
->
-early in raw_open_common. If this fails, propagate the error up. The
->
-signature of aio_get_linux_aio() was not modified, because it seems
->
-preferable to return the actual errno from the possible failing
->
-initialization calls.
->
->
-Additionally, when the AioContext changes, we need to associate a
->
-LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
->
-callback and call the new aio_setup_linux_aio(), which will allocate a
->
-new AioContext if needed, and return errors on failures. If it fails for
->
-any reason, fallback to threaded AIO with an error message, as the
->
-device is already in-use by the guest.
->
->
-Add an assert that aio_get_linux_aio() cannot return NULL.
->
->
-Signed-off-by: Nishanth Aravamudan <address@hidden>
->
-Message-id: address@hidden
->
-Signed-off-by: Stefan Hajnoczi <address@hidden>
->
->
->
-Not sure what is causing this assertion to fail. Here is the qemu command
->
-line of the guest, from qemu log, which throws this error:
->
->
->
-LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
->
-QEMU_AUDIO_DRV=none /usr/local/bin/qemu-system-s390x -name
->
-guest=rt_vm1,debug-threads=on -S -object
->
-secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-21-rt_vm1/master-key.aes
->
--machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off -m 1024
->
--realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -object
->
-iothread,id=iothread1 -uuid 0cde16cd-091d-41bd-9ac2-5243df5c9a0d -display
->
-none -no-user-config -nodefaults -chardev
->
-socket,id=charmonitor,fd=28,server,nowait -mon
->
-chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot
->
-strict=on -drive
->
-file=/dev/mapper/360050763998b0883980000002a000031,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
->
--device
->
-virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,write-cache=on
->
--netdev tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device
->
-virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:3a:c8:67:95:84,devno=fe.0.0000
->
--netdev tap,fd=32,id=hostnet1,vhost=on,vhostfd=33 -device
->
-virtio-net-ccw,netdev=hostnet1,id=net1,mac=52:54:00:2a:e5:08,devno=fe.0.0002
->
--chardev pty,id=charconsole0 -device
->
-sclpconsole,chardev=charconsole0,id=console0 -device
->
-virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -sandbox
->
-on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny -msg
->
-timestamp=on
->
->
->
->
-2018-07-17 15:48:42.252+0000: Domain id=21 is tainted: high-privileges
->
-2018-07-17T15:48:42.279380Z qemu-system-s390x: -chardev pty,id=charconsole0:
->
-char device redirected to /dev/pts/3 (label charconsole0)
->
-qemu-system-s390x: util/async.c:339: aio_get_linux_aio: Assertion
->
-`ctx->linux_aio' failed.
->
-2018-07-17 15:48:43.309+0000: shutting down, reason=failed
->
->
->
-Any help debugging this would be greatly appreciated.
-iiuc, this possibly implies AIO was not actually used previously on this
-guest (it might have silently been falling back to threaded IO?). I
-don't have access to s390x, but would it be possible to run qemu under
-gdb and see if aio_setup_linux_aio is being called at all (I think it
-might not be, but I'm not sure why), and if so, if it's for the context
-in question?
-
-If it's not being called first, could you see what callpath is calling
-aio_get_linux_aio when this assertion trips?
-
-Thanks!
--Nish
-
-On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
-iiuc, this possibly implies AIO was not actually used previously on this
-guest (it might have silently been falling back to threaded IO?). I
-don't have access to s390x, but would it be possible to run qemu under
-gdb and see if aio_setup_linux_aio is being called at all (I think it
-might not be, but I'm not sure why), and if so, if it's for the context
-in question?
-
-If it's not being called first, could you see what callpath is calling
-aio_get_linux_aio when this assertion trips?
-
-Thanks!
--Nish
-Hi Nishant,
-From the coredump of the guest this is the call trace that calls
-aio_get_linux_aio:
-Stack trace of thread 145158:
-#0  0x000003ff94dbe274 raise (libc.so.6)
-#1  0x000003ff94da39a8 abort (libc.so.6)
-#2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
-#3  0x000003ff94db634c __assert_fail (libc.so.6)
-#4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
-#5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
-#6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
-#7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
-#8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
-#9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
-#10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
-#11 0x000003ff94f879a8 start_thread (libpthread.so.0)
-#12 0x000003ff94e797ee thread_start (libc.so.6)
-
-
-Thanks for taking a look and responding.
-
-Thanks
-Farhan
-
-On 07/18/2018 09:42 AM, Farhan Ali wrote:
-On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
-iiuc, this possibly implies AIO was not actually used previously on this
-guest (it might have silently been falling back to threaded IO?). I
-don't have access to s390x, but would it be possible to run qemu under
-gdb and see if aio_setup_linux_aio is being called at all (I think it
-might not be, but I'm not sure why), and if so, if it's for the context
-in question?
-
-If it's not being called first, could you see what callpath is calling
-aio_get_linux_aio when this assertion trips?
-
-Thanks!
--Nish
-Hi Nishant,
-From the coredump of the guest this is the call trace that calls
-aio_get_linux_aio:
-Stack trace of thread 145158:
-#0  0x000003ff94dbe274 raise (libc.so.6)
-#1  0x000003ff94da39a8 abort (libc.so.6)
-#2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
-#3  0x000003ff94db634c __assert_fail (libc.so.6)
-#4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
-#5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
-#6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
-#7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
-#8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
-#9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
-#10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
-#11 0x000003ff94f879a8 start_thread (libpthread.so.0)
-#12 0x000003ff94e797ee thread_start (libc.so.6)
-
-
-Thanks for taking a look and responding.
-
-Thanks
-Farhan
-Trying to debug a little further, the block device in this case is a
-"host device". And looking at your commit carefully you use the
-bdrv_attach_aio_context callback to setup a Linux AioContext.
-For some reason the "host device" struct (BlockDriver bdrv_host_device
-in block/file-posix.c) does not have a bdrv_attach_aio_context defined.
-So a simple change of adding the callback to the struct solves the issue
-and the guest starts fine.
-diff --git a/block/file-posix.c b/block/file-posix.c
-index 28824aa..b8d59fb 100644
---- a/block/file-posix.c
-+++ b/block/file-posix.c
-@@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
-     .bdrv_refresh_limits = raw_refresh_limits,
-     .bdrv_io_plug = raw_aio_plug,
-     .bdrv_io_unplug = raw_aio_unplug,
-+    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
-
-     .bdrv_co_truncate       = raw_co_truncate,
-     .bdrv_getlength    = raw_getlength,
-I am not too familiar with block device code in QEMU, so not sure if
-this is the right fix or if there are some underlying problems.
-Thanks
-Farhan
-
-On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
->
->
->
-On 07/18/2018 09:42 AM, Farhan Ali wrote:
->
->
->
->
->
-> On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
->
-> > iiuc, this possibly implies AIO was not actually used previously on this
->
-> > guest (it might have silently been falling back to threaded IO?). I
->
-> > don't have access to s390x, but would it be possible to run qemu under
->
-> > gdb and see if aio_setup_linux_aio is being called at all (I think it
->
-> > might not be, but I'm not sure why), and if so, if it's for the context
->
-> > in question?
->
-> >
->
-> > If it's not being called first, could you see what callpath is calling
->
-> > aio_get_linux_aio when this assertion trips?
->
-> >
->
-> > Thanks!
->
-> > -Nish
->
->
->
->
->
-> Hi Nishant,
->
->
->
->  From the coredump of the guest this is the call trace that calls
->
-> aio_get_linux_aio:
->
->
->
->
->
-> Stack trace of thread 145158:
->
-> #0  0x000003ff94dbe274 raise (libc.so.6)
->
-> #1  0x000003ff94da39a8 abort (libc.so.6)
->
-> #2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
->
-> #3  0x000003ff94db634c __assert_fail (libc.so.6)
->
-> #4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
->
-> #5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
->
-> #6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
->
-> #7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
->
-> #8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
->
-> #9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
->
-> #10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
->
-> #11 0x000003ff94f879a8 start_thread (libpthread.so.0)
->
-> #12 0x000003ff94e797ee thread_start (libc.so.6)
->
->
->
->
->
-> Thanks for taking a look and responding.
->
->
->
-> Thanks
->
-> Farhan
->
->
->
->
->
->
->
->
-Trying to debug a little further, the block device in this case is a "host
->
-device". And looking at your commit carefully you use the
->
-bdrv_attach_aio_context callback to setup a Linux AioContext.
->
->
-For some reason the "host device" struct (BlockDriver bdrv_host_device in
->
-block/file-posix.c) does not have a bdrv_attach_aio_context defined.
->
-So a simple change of adding the callback to the struct solves the issue and
->
-the guest starts fine.
->
->
->
-diff --git a/block/file-posix.c b/block/file-posix.c
->
-index 28824aa..b8d59fb 100644
->
---- a/block/file-posix.c
->
-+++ b/block/file-posix.c
->
-@@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
->
-.bdrv_refresh_limits = raw_refresh_limits,
->
-.bdrv_io_plug = raw_aio_plug,
->
-.bdrv_io_unplug = raw_aio_unplug,
->
-+    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
->
->
-.bdrv_co_truncate       = raw_co_truncate,
->
-.bdrv_getlength    = raw_getlength,
->
->
->
->
-I am not too familiar with block device code in QEMU, so not sure if
->
-this is the right fix or if there are some underlying problems.
-Oh this is quite embarassing! I only added the bdrv_attach_aio_context
-callback for the file-backed device. Your fix is definitely corect for
-host device. Let me make sure there weren't any others missed and I will
-send out a properly formatted patch. Thank you for the quick testing and
-turnaround!
-
--Nish
-
-On 07/18/2018 08:52 PM, Nishanth Aravamudan wrote:
->
-On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
->
->
->
->
->
-> On 07/18/2018 09:42 AM, Farhan Ali wrote:
->
->>
->
->>
->
->> On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
->
->>> iiuc, this possibly implies AIO was not actually used previously on this
->
->>> guest (it might have silently been falling back to threaded IO?). I
->
->>> don't have access to s390x, but would it be possible to run qemu under
->
->>> gdb and see if aio_setup_linux_aio is being called at all (I think it
->
->>> might not be, but I'm not sure why), and if so, if it's for the context
->
->>> in question?
->
->>>
->
->>> If it's not being called first, could you see what callpath is calling
->
->>> aio_get_linux_aio when this assertion trips?
->
->>>
->
->>> Thanks!
->
->>> -Nish
->
->>
->
->>
->
->> Hi Nishant,
->
->>
->
->>  From the coredump of the guest this is the call trace that calls
->
->> aio_get_linux_aio:
->
->>
->
->>
->
->> Stack trace of thread 145158:
->
->> #0  0x000003ff94dbe274 raise (libc.so.6)
->
->> #1  0x000003ff94da39a8 abort (libc.so.6)
->
->> #2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
->
->> #3  0x000003ff94db634c __assert_fail (libc.so.6)
->
->> #4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
->
->> #5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
->
->> #6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
->
->> #7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
->
->> #8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
->
->> #9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
->
->> #10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
->
->> #11 0x000003ff94f879a8 start_thread (libpthread.so.0)
->
->> #12 0x000003ff94e797ee thread_start (libc.so.6)
->
->>
->
->>
->
->> Thanks for taking a look and responding.
->
->>
->
->> Thanks
->
->> Farhan
->
->>
->
->>
->
->>
->
->
->
-> Trying to debug a little further, the block device in this case is a "host
->
-> device". And looking at your commit carefully you use the
->
-> bdrv_attach_aio_context callback to setup a Linux AioContext.
->
->
->
-> For some reason the "host device" struct (BlockDriver bdrv_host_device in
->
-> block/file-posix.c) does not have a bdrv_attach_aio_context defined.
->
-> So a simple change of adding the callback to the struct solves the issue and
->
-> the guest starts fine.
->
->
->
->
->
-> diff --git a/block/file-posix.c b/block/file-posix.c
->
-> index 28824aa..b8d59fb 100644
->
-> --- a/block/file-posix.c
->
-> +++ b/block/file-posix.c
->
-> @@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
->
->      .bdrv_refresh_limits = raw_refresh_limits,
->
->      .bdrv_io_plug = raw_aio_plug,
->
->      .bdrv_io_unplug = raw_aio_unplug,
->
-> +    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
->
->
->
->      .bdrv_co_truncate       = raw_co_truncate,
->
->      .bdrv_getlength    = raw_getlength,
->
->
->
->
->
->
->
-> I am not too familiar with block device code in QEMU, so not sure if
->
-> this is the right fix or if there are some underlying problems.
->
->
-Oh this is quite embarassing! I only added the bdrv_attach_aio_context
->
-callback for the file-backed device. Your fix is definitely corect for
->
-host device. Let me make sure there weren't any others missed and I will
->
-send out a properly formatted patch. Thank you for the quick testing and
->
-turnaround!
-Farhan, can you respin your patch with proper sign-off and patch description?
-Adding qemu-block.
-
-Hi Christian,
-
-On 19.07.2018 [08:55:20 +0200], Christian Borntraeger wrote:
->
->
->
-On 07/18/2018 08:52 PM, Nishanth Aravamudan wrote:
->
-> On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
->
->>
->
->>
->
->> On 07/18/2018 09:42 AM, Farhan Ali wrote:
-<snip>
-
->
->> I am not too familiar with block device code in QEMU, so not sure if
->
->> this is the right fix or if there are some underlying problems.
->
->
->
-> Oh this is quite embarassing! I only added the bdrv_attach_aio_context
->
-> callback for the file-backed device. Your fix is definitely corect for
->
-> host device. Let me make sure there weren't any others missed and I will
->
-> send out a properly formatted patch. Thank you for the quick testing and
->
-> turnaround!
->
->
-Farhan, can you respin your patch with proper sign-off and patch description?
->
-Adding qemu-block.
-I sent it yesterday, sorry I didn't cc everyone from this e-mail:
-http://lists.nongnu.org/archive/html/qemu-block/2018-07/msg00516.html
-Thanks,
-Nish
-
diff --git a/results/classifier/005/mistranslation/25842545 b/results/classifier/005/mistranslation/25842545
deleted file mode 100644
index 088ed7a1..00000000
--- a/results/classifier/005/mistranslation/25842545
+++ /dev/null
@@ -1,210 +0,0 @@
-mistranslation: 0.928
-other: 0.912
-KVM: 0.867
-vnc: 0.862
-device: 0.847
-instruction: 0.835
-semantic: 0.829
-boot: 0.824
-assembly: 0.824
-graphic: 0.822
-socket: 0.808
-network: 0.796
-
-[Qemu-devel] [Bug?] Guest pause because VMPTRLD failed in KVM
-
-Hello,
-
-  We encountered a problem that a guest paused because the KMOD report VMPTRLD 
-failed.
-
-The related information is as follows:
-
-1) Qemu command:
-   /usr/bin/qemu-kvm -name omu1 -S -machine pc-i440fx-2.3,accel=kvm,usb=off -cpu
-host -m 15625 -realtime mlock=off -smp 8,sockets=1,cores=8,threads=1 -uuid
-a2aacfff-6583-48b4-b6a4-e6830e519931 -no-user-config -nodefaults -chardev
-socket,id=charmonitor,path=/var/lib/libvirt/qemu/omu1.monitor,server,nowait
--mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
--boot strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
-virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive
-file=/home/env/guest1.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native
-  -device
-virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0
-  -drive
-file=/home/env/guest_300G.img,if=none,id=drive-virtio-disk1,format=raw,cache=none,aio=native
-  -device
-virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk1,id=virtio-disk1
-  -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device
-virtio-net-pci,netdev=hostnet0,id=net0,mac=00:00:80:05:00:00,bus=pci.0,addr=0x3
--netdev tap,fd=27,id=hostnet1,vhost=on,vhostfd=28 -device
-virtio-net-pci,netdev=hostnet1,id=net1,mac=00:00:80:05:00:01,bus=pci.0,addr=0x4
--chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0
--device usb-tablet,id=input0 -vnc 0.0.0.0:0 -device
-cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2 -device
-virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on
-
-   2) Qemu log:
-   KVM: entry failed, hardware error 0x4
-   RAX=00000000ffffffed RBX=ffff8803fa2d7fd8 RCX=0100000000000000
-RDX=0000000000000000
-   RSI=0000000000000000 RDI=0000000000000046 RBP=ffff8803fa2d7e90
-RSP=ffff8803fa2efe90
-   R8 =0000000000000000 R9 =0000000000000000 R10=0000000000000000
-R11=000000000000b69a
-   R12=0000000000000001 R13=ffffffff81a25b40 R14=0000000000000000
-R15=ffff8803fa2d7fd8
-   RIP=ffffffff81053e16 RFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
-   ES =0000 0000000000000000 ffffffff 00c00000
-   CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
-   SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS   [-WA]
-   DS =0000 0000000000000000 ffffffff 00c00000
-   FS =0000 0000000000000000 ffffffff 00c00000
-   GS =0000 ffff88040f540000 ffffffff 00c00000
-   LDT=0000 0000000000000000 ffffffff 00c00000
-   TR =0040 ffff88040f550a40 00002087 00008b00 DPL=0 TSS64-busy
-   GDT=     ffff88040f549000 0000007f
-   IDT=     ffffffffff529000 00000fff
-   CR0=80050033 CR2=00007f81ca0c5000 CR3=00000003f5081000 CR4=000407e0
-   DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
-DR3=0000000000000000
-   DR6=00000000ffff0ff0 DR7=0000000000000400
-   EFER=0000000000000d01
-   Code=?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? <??> ?? ??
-?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
-
-   3) Demsg
-   [347315.028339] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
-   klogd 1.4.1, ---------- state change ----------
-   [347315.039506] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
-   [347315.051728] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
-   [347315.057472] vmwrite error: reg 6c0a value ffff88307e66e480 (err
-2120672384)
-   [347315.064567] Pid: 69523, comm: qemu-kvm Tainted: GF           X
-3.0.93-0.8-default #1
-   [347315.064569] Call Trace:
-   [347315.064587]  [<ffffffff810049d5>] dump_trace+0x75/0x300
-   [347315.064595]  [<ffffffff8145e3e3>] dump_stack+0x69/0x6f
-   [347315.064617]  [<ffffffffa03738de>] vmx_vcpu_load+0x11e/0x1d0 [kvm_intel]
-   [347315.064647]  [<ffffffffa029a204>] kvm_arch_vcpu_load+0x44/0x1d0 [kvm]
-   [347315.064669]  [<ffffffff81054ee1>] finish_task_switch+0x81/0xe0
-   [347315.064676]  [<ffffffff8145f0b4>] thread_return+0x3b/0x2a7
-   [347315.064687]  [<ffffffffa028d9b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-   [347315.064703]  [<ffffffffa02a16d1>] __vcpu_run+0xd1/0x260 [kvm]
-   [347315.064732]  [<ffffffffa02a2418>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 
-[kvm]
-   [347315.064759]  [<ffffffffa028ecee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-   [347315.064771]  [<ffffffff8116bdfb>] do_vfs_ioctl+0x8b/0x3b0
-   [347315.064776]  [<ffffffff8116c1c1>] sys_ioctl+0xa1/0xb0
-   [347315.064783]  [<ffffffff81469272>] system_call_fastpath+0x16/0x1b
-   [347315.064797]  [<00007fee51969ce7>] 0x7fee51969ce6
-   [347315.064799] vmwrite error: reg 6c0c value ffff88307e664000 (err
-2120630272)
-   [347315.064802] Pid: 69523, comm: qemu-kvm Tainted: GF           X
-3.0.93-0.8-default #1
-   [347315.064803] Call Trace:
-   [347315.064807]  [<ffffffff810049d5>] dump_trace+0x75/0x300
-   [347315.064811]  [<ffffffff8145e3e3>] dump_stack+0x69/0x6f
-   [347315.064817]  [<ffffffffa03738ec>] vmx_vcpu_load+0x12c/0x1d0 [kvm_intel]
-   [347315.064832]  [<ffffffffa029a204>] kvm_arch_vcpu_load+0x44/0x1d0 [kvm]
-   [347315.064851]  [<ffffffff81054ee1>] finish_task_switch+0x81/0xe0
-   [347315.064855]  [<ffffffff8145f0b4>] thread_return+0x3b/0x2a7
-   [347315.064865]  [<ffffffffa028d9b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-   [347315.064880]  [<ffffffffa02a16d1>] __vcpu_run+0xd1/0x260 [kvm]
-   [347315.064907]  [<ffffffffa02a2418>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 
-[kvm]
-   [347315.064933]  [<ffffffffa028ecee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-   [347315.064943]  [<ffffffff8116bdfb>] do_vfs_ioctl+0x8b/0x3b0
-   [347315.064947]  [<ffffffff8116c1c1>] sys_ioctl+0xa1/0xb0
-   [347315.064951]  [<ffffffff81469272>] system_call_fastpath+0x16/0x1b
-   [347315.064957]  [<00007fee51969ce7>] 0x7fee51969ce6
-   [347315.064959] vmwrite error: reg 6c10 value 0 (err 0)
-
-   4) The isssue can't be reporduced. I search the Intel VMX sepc about reaseons
-of vmptrld failure:
-   The instruction fails if its operand is not properly aligned, sets
-unsupported physical-address bits, or is equal to the VMXON
-   pointer. In addition, the instruction fails if the 32 bits in memory
-referenced by the operand do not match the VMCS
-   revision identifier supported by this processor.
-
-   But I can't find any cues from the KVM source code. It seems each
-   error conditions is impossible in theory. :(
-
-Any suggestions will be appreciated! Paolo?
-
--- 
-Regards,
--Gonglei
-
-On 10/11/2016 15:10, gong lei wrote:
->
-4) The isssue can't be reporduced. I search the Intel VMX sepc about
->
-reaseons
->
-of vmptrld failure:
->
-The instruction fails if its operand is not properly aligned, sets
->
-unsupported physical-address bits, or is equal to the VMXON
->
-pointer. In addition, the instruction fails if the 32 bits in memory
->
-referenced by the operand do not match the VMCS
->
-revision identifier supported by this processor.
->
->
-But I can't find any cues from the KVM source code. It seems each
->
-error conditions is impossible in theory. :(
-Yes, it should not happen. :(
-
-If it's not reproducible, it's really hard to say what it was, except a
-random memory corruption elsewhere or even a bit flip (!).
-
-Paolo
-
-On 2016/11/17 20:39, Paolo Bonzini wrote:
->
->
-On 10/11/2016 15:10, gong lei wrote:
->
->     4) The isssue can't be reporduced. I search the Intel VMX sepc about
->
-> reaseons
->
-> of vmptrld failure:
->
->     The instruction fails if its operand is not properly aligned, sets
->
-> unsupported physical-address bits, or is equal to the VMXON
->
->     pointer. In addition, the instruction fails if the 32 bits in memory
->
-> referenced by the operand do not match the VMCS
->
->     revision identifier supported by this processor.
->
->
->
->     But I can't find any cues from the KVM source code. It seems each
->
->     error conditions is impossible in theory. :(
->
-Yes, it should not happen. :(
->
->
-If it's not reproducible, it's really hard to say what it was, except a
->
-random memory corruption elsewhere or even a bit flip (!).
->
->
-Paolo
-Thanks for your reply, Paolo :)
-
--- 
-Regards,
--Gonglei
-
diff --git a/results/classifier/005/mistranslation/64322995 b/results/classifier/005/mistranslation/64322995
deleted file mode 100644
index 7330769b..00000000
--- a/results/classifier/005/mistranslation/64322995
+++ /dev/null
@@ -1,62 +0,0 @@
-mistranslation: 0.936
-device: 0.915
-network: 0.914
-semantic: 0.906
-graphic: 0.904
-other: 0.881
-socket: 0.866
-instruction: 0.864
-vnc: 0.801
-boot: 0.780
-KVM: 0.742
-assembly: 0.653
-
-[Qemu-devel] [BUG] trace: QEMU hangs on initialization with the	"simple" backend
-
-While starting the softmmu version of QEMU, the simple backend waits for the
-writeout thread to signal a condition variable when initializing the output file
-path. But since the writeout thread has not been created, it just waits forever.
-
-Thanks,
-  Lluis
-
-On Tue, Feb 09, 2016 at 09:24:04PM +0100, Lluís Vilanova wrote:
->
-While starting the softmmu version of QEMU, the simple backend waits for the
->
-writeout thread to signal a condition variable when initializing the output
->
-file
->
-path. But since the writeout thread has not been created, it just waits
->
-forever.
-Denis Lunev posted a fix:
-https://patchwork.ozlabs.org/patch/580968/
-Stefan
-signature.asc
-Description:
-PGP signature
-
-Stefan Hajnoczi writes:
-
->
-On Tue, Feb 09, 2016 at 09:24:04PM +0100, Lluís Vilanova wrote:
->
-> While starting the softmmu version of QEMU, the simple backend waits for the
->
-> writeout thread to signal a condition variable when initializing the output
->
-> file
->
-> path. But since the writeout thread has not been created, it just waits
->
-> forever.
->
-Denis Lunev posted a fix:
->
-https://patchwork.ozlabs.org/patch/580968/
-Great, thanks.
-
-Lluis
-
diff --git a/results/classifier/005/mistranslation/70294255 b/results/classifier/005/mistranslation/70294255
deleted file mode 100644
index 2f154bf2..00000000
--- a/results/classifier/005/mistranslation/70294255
+++ /dev/null
@@ -1,1069 +0,0 @@
-mistranslation: 0.862
-assembly: 0.861
-semantic: 0.858
-socket: 0.858
-device: 0.857
-graphic: 0.857
-instruction: 0.856
-other: 0.852
-network: 0.846
-vnc: 0.837
-boot: 0.811
-KVM: 0.806
-
-[Qemu-devel] 答复: Re:   答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
-
-hi:
-
-yes.it is better.
-
-And should we delete 
-
-
-
-
-#ifdef WIN32
-
-    QIO_CHANNEL(cioc)-＞event = CreateEvent(NULL, FALSE, FALSE, NULL)
-
-#endif
-
-
-
-
-in qio_channel_socket_accept？
-
-qio_channel_socket_new already have it.
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992
-抄送人： address@hidden address@hidden address@hidden address@hidden
-日 期 ：2017年03月22日 15:03
-主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
-
-
-
-
-
-Hi,
-
-On 2017/3/22 9:42, address@hidden wrote:
-＞ diff --git a/migration/socket.c b/migration/socket.c
-＞
-＞
-＞ index 13966f1..d65a0ea 100644
-＞
-＞
-＞ --- a/migration/socket.c
-＞
-＞
-＞ +++ b/migration/socket.c
-＞
-＞
-＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞
-＞
-＞       }
-＞
-＞
-＞
-＞
-＞
-＞       trace_migration_socket_incoming_accepted()
-＞
-＞
-＞
-＞
-＞
-＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-＞
-＞
-＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞
-＞
-＞       migration_channel_process_incoming(migrate_get_current(),
-＞
-＞
-＞                                          QIO_CHANNEL(sioc))
-＞
-＞
-＞       object_unref(OBJECT(sioc))
-＞
-＞
-＞
-＞
-＞ Is this patch ok?
-＞
-
-Yes, i think this works, but a better way maybe to call 
-qio_channel_set_feature()
-in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
-socket accept fd,
-Or fix it by this:
-
-diff --git a/io/channel-socket.c b/io/channel-socket.c
-index f546c68..ce6894c 100644
---- a/io/channel-socket.c
-+++ b/io/channel-socket.c
-@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
-                            Error **errp)
-  {
-      QIOChannelSocket *cioc
--
--    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET))
--    cioc-＞fd = -1
-+
-+    cioc = qio_channel_socket_new()
-      cioc-＞remoteAddrLen = sizeof(ioc-＞remoteAddr)
-      cioc-＞localAddrLen = sizeof(ioc-＞localAddr)
-
-
-Thanks,
-Hailiang
-
-＞ I have test it . The test could not hang any more.
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞
-＞
-＞
-＞ 发件人： address@hidden
-＞ 收件人： address@hidden address@hidden
-＞ 抄送人： address@hidden address@hidden address@hidden
-＞ 日 期 ：2017年03月22日 09:11
-＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
-＞
-＞
-＞
-＞
-＞
-＞ On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
-＞ ＞ * Hailiang Zhang (address@hidden) wrote:
-＞ ＞＞ Hi,
-＞ ＞＞
-＞ ＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-＞ ＞＞
-＞ ＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-＞ ＞＞ case COLO thread/incoming thread is stuck in read/write() while do 
-failover,
-＞ ＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
-＞ ＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
-＞ ＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-＞ ＞＞
-＞ ＞＞ Cc: Dr. David Alan Gilbert address@hidden
-＞ ＞＞
-＞ ＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
-＞ ＞＞ if we tried to cancel migration.
-＞ ＞＞
-＞ ＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
-Error **errp)
-＞ ＞＞ {
-＞ ＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
-＞ ＞＞      migration_channel_connect(s, ioc, NULL)
-＞ ＞＞      ... ...
-＞ ＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-＞ ＞＞ and the
-＞ ＞＞ migrate_fd_cancel()
-＞ ＞＞ {
-＞ ＞＞   ... ...
-＞ ＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
-＞ ＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
-＞ ＞＞      }
-＞ ＞＞ }
-＞ ＞
-＞ ＞ (cc'd in Daniel Berrange).
-＞ ＞ I see that we call qio_channel_set_feature(ioc, 
-QIO_CHANNEL_FEATURE_SHUTDOWN) at the
-＞ ＞ top of qio_channel_socket_new  so I think that's safe isn't it?
-＞ ＞
-＞
-＞ Hmm, you are right, this problem is only exist for the migration incoming fd, 
-thanks.
-＞
-＞ ＞ Dave
-＞ ＞
-＞ ＞＞ Thanks,
-＞ ＞＞ Hailiang
-＞ ＞＞
-＞ ＞＞ On 2017/3/21 16:10, address@hidden wrote:
-＞ ＞＞＞ Thank you。
-＞ ＞＞＞
-＞ ＞＞＞ I have test aready。
-＞ ＞＞＞
-＞ ＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same 
-place。
-＞ ＞＞＞
-＞ ＞＞＞ Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node 
-qemu will not produce the problem,but Primary Node panic can。
-＞ ＞＞＞
-＞ ＞＞＞ I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ when failover,channel_shutdown could not shut down the channel.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ I test a patch:
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ index 13966f1..d65a0ea 100644
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ --- a/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ +++ b/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        }
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        trace_migration_socket_incoming_accepted()
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), 
-"migration-socket-incoming")
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        migration_channel_process_incoming(migrate_get_current(),
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞                                           QIO_CHANNEL(sioc))
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        object_unref(OBJECT(sioc))
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ My test will not hang any more.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ 原始邮件
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ 发件人： address@hidden
-＞ ＞＞＞ 收件人：王广10165992 address@hidden
-＞ ＞＞＞ 抄送人： address@hidden address@hidden
-＞ ＞＞＞ 日 期 ：2017年03月21日 15:58
-＞ ＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ Hi,Wang.
-＞ ＞＞＞
-＞ ＞＞＞ You can test this branch:
-＞ ＞＞＞
-＞ ＞＞＞
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-＞ ＞＞＞
-＞ ＞＞＞ and please follow wiki ensure your own configuration correctly.
-＞ ＞＞＞
-＞ ＞＞＞
-http://wiki.qemu-project.org/Features/COLO
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ Thanks
-＞ ＞＞＞
-＞ ＞＞＞ Zhang Chen
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ hi.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ I test the git qemu master have the same problem.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ ＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ ＞＞＞ ＞ (address@hidden, address@hidden "",
-＞ ＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ ＞＞＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:295
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ ＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:568
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:648
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ ＞＞＞ ＞ address@hidden) at migration/colo.c:244
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ ＞＞＞ ＞ out＞, address@hidden,
-＞ ＞＞＞ ＞ address@hidden)
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞     at migration/colo.c:264
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ ＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞name
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $3 = 0
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ ＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ ＞＞＞ ＞ gmain.c:3054
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ ＞＞＞ ＞ address@hidden) at gmain.c:3630
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ ＞＞＞ ＞ util/main-loop.c:258
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
-＞ ＞＞＞ ＞ util/main-loop.c:506
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ ＞＞＞ ＞ out＞) at vl.c:4709
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞features
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $1 = 6
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞name
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ May be socket_accept_incoming_migration should
-＞ ＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ thank you.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ 原始邮件
-＞ ＞＞＞ ＞ address@hidden
-＞ ＞＞＞ ＞ address@hidden
-＞ ＞＞＞ ＞ address@hidden@huawei.com＞
-＞ ＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
-＞ ＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞＞＞ ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞＞＞ ＞ ＞ Do the colo have any plan for development?
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ In our internal version can run it successfully,
-＞ ＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
-＞ ＞＞＞ ＞ Next time if you have some question about COLO,
-＞ ＞＞＞ ＞ please cc me and zhanghailiang address@hidden
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ Thanks
-＞ ＞＞＞ ＞ Zhang Chen
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
-＞ ＞＞＞ ＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized 
-out＞,
-＞ ＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, 
-errp=0x0) at
-＞ ＞＞＞ ＞ ＞ io/channel-socket.c:497
-＞ ＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden "", address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:257
-＞ ＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:523
-＞ ＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:603
-＞ ＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message 
-(errp=0x7f3d62bfaa48,
-＞ ＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞＞＞ ＞ ＞ migration/colo.c:546
-＞ ＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞＞＞ ＞ ＞ migration/colo.c:649
-＞ ＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ --
-＞ ＞＞＞ ＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ --
-＞ ＞＞＞ ＞ Thanks
-＞ ＞＞＞ ＞ Zhang Chen
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞
-＞ ＞＞
-＞ ＞ --
-＞ ＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
-＞ ＞
-＞ ＞ .
-＞ ＞
-＞
-
-On 2017/3/22 16:09, address@hidden wrote:
-hi:
-
-yes.it is better.
-
-And should we delete
-Yes, you are right.
-#ifdef WIN32
-
-     QIO_CHANNEL(cioc)-＞event = CreateEvent(NULL, FALSE, FALSE, NULL)
-
-#endif
-
-
-
-
-in qio_channel_socket_accept？
-
-qio_channel_socket_new already have it.
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992
-抄送人： address@hidden address@hidden address@hidden address@hidden
-日 期 ：2017年03月22日 15:03
-主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
-
-
-
-
-
-Hi,
-
-On 2017/3/22 9:42, address@hidden wrote:
-＞ diff --git a/migration/socket.c b/migration/socket.c
-＞
-＞
-＞ index 13966f1..d65a0ea 100644
-＞
-＞
-＞ --- a/migration/socket.c
-＞
-＞
-＞ +++ b/migration/socket.c
-＞
-＞
-＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞
-＞
-＞       }
-＞
-＞
-＞
-＞
-＞
-＞       trace_migration_socket_incoming_accepted()
-＞
-＞
-＞
-＞
-＞
-＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-＞
-＞
-＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞
-＞
-＞       migration_channel_process_incoming(migrate_get_current(),
-＞
-＞
-＞                                          QIO_CHANNEL(sioc))
-＞
-＞
-＞       object_unref(OBJECT(sioc))
-＞
-＞
-＞
-＞
-＞ Is this patch ok?
-＞
-
-Yes, i think this works, but a better way maybe to call 
-qio_channel_set_feature()
-in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
-socket accept fd,
-Or fix it by this:
-
-diff --git a/io/channel-socket.c b/io/channel-socket.c
-index f546c68..ce6894c 100644
---- a/io/channel-socket.c
-+++ b/io/channel-socket.c
-@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
-                             Error **errp)
-   {
-       QIOChannelSocket *cioc
--
--    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET))
--    cioc-＞fd = -1
-+
-+    cioc = qio_channel_socket_new()
-       cioc-＞remoteAddrLen = sizeof(ioc-＞remoteAddr)
-       cioc-＞localAddrLen = sizeof(ioc-＞localAddr)
-
-
-Thanks,
-Hailiang
-
-＞ I have test it . The test could not hang any more.
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞
-＞
-＞
-＞ 发件人： address@hidden
-＞ 收件人： address@hidden address@hidden
-＞ 抄送人： address@hidden address@hidden address@hidden
-＞ 日 期 ：2017年03月22日 09:11
-＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
-＞
-＞
-＞
-＞
-＞
-＞ On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
-＞ ＞ * Hailiang Zhang (address@hidden) wrote:
-＞ ＞＞ Hi,
-＞ ＞＞
-＞ ＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-＞ ＞＞
-＞ ＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-＞ ＞＞ case COLO thread/incoming thread is stuck in read/write() while do 
-failover,
-＞ ＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
-＞ ＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
-＞ ＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-＞ ＞＞
-＞ ＞＞ Cc: Dr. David Alan Gilbert address@hidden
-＞ ＞＞
-＞ ＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
-＞ ＞＞ if we tried to cancel migration.
-＞ ＞＞
-＞ ＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
-Error **errp)
-＞ ＞＞ {
-＞ ＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
-＞ ＞＞      migration_channel_connect(s, ioc, NULL)
-＞ ＞＞      ... ...
-＞ ＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-＞ ＞＞ and the
-＞ ＞＞ migrate_fd_cancel()
-＞ ＞＞ {
-＞ ＞＞   ... ...
-＞ ＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
-＞ ＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
-＞ ＞＞      }
-＞ ＞＞ }
-＞ ＞
-＞ ＞ (cc'd in Daniel Berrange).
-＞ ＞ I see that we call qio_channel_set_feature(ioc, 
-QIO_CHANNEL_FEATURE_SHUTDOWN) at the
-＞ ＞ top of qio_channel_socket_new  so I think that's safe isn't it?
-＞ ＞
-＞
-＞ Hmm, you are right, this problem is only exist for the migration incoming fd, 
-thanks.
-＞
-＞ ＞ Dave
-＞ ＞
-＞ ＞＞ Thanks,
-＞ ＞＞ Hailiang
-＞ ＞＞
-＞ ＞＞ On 2017/3/21 16:10, address@hidden wrote:
-＞ ＞＞＞ Thank you。
-＞ ＞＞＞
-＞ ＞＞＞ I have test aready。
-＞ ＞＞＞
-＞ ＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same 
-place。
-＞ ＞＞＞
-＞ ＞＞＞ Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node 
-qemu will not produce the problem,but Primary Node panic can。
-＞ ＞＞＞
-＞ ＞＞＞ I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ when failover,channel_shutdown could not shut down the channel.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ I test a patch:
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ index 13966f1..d65a0ea 100644
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ --- a/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ +++ b/migration/socket.c
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        }
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        trace_migration_socket_incoming_accepted()
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), 
-"migration-socket-incoming")
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        migration_channel_process_incoming(migrate_get_current(),
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞                                           QIO_CHANNEL(sioc))
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞        object_unref(OBJECT(sioc))
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ My test will not hang any more.
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ 原始邮件
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ 发件人： address@hidden
-＞ ＞＞＞ 收件人：王广10165992 address@hidden
-＞ ＞＞＞ 抄送人： address@hidden address@hidden
-＞ ＞＞＞ 日 期 ：2017年03月21日 15:58
-＞ ＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ Hi,Wang.
-＞ ＞＞＞
-＞ ＞＞＞ You can test this branch:
-＞ ＞＞＞
-＞ ＞＞＞
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-＞ ＞＞＞
-＞ ＞＞＞ and please follow wiki ensure your own configuration correctly.
-＞ ＞＞＞
-＞ ＞＞＞
-http://wiki.qemu-project.org/Features/COLO
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ Thanks
-＞ ＞＞＞
-＞ ＞＞＞ Zhang Chen
-＞ ＞＞＞
-＞ ＞＞＞
-＞ ＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ hi.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ I test the git qemu master have the same problem.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ ＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ ＞＞＞ ＞ (address@hidden, address@hidden "",
-＞ ＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ ＞＞＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:295
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ ＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:568
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ ＞＞＞ ＞ migration/qemu-file.c:648
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ ＞＞＞ ＞ address@hidden) at migration/colo.c:244
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ ＞＞＞ ＞ out＞, address@hidden,
-＞ ＞＞＞ ＞ address@hidden)
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞     at migration/colo.c:264
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ ＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞name
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $3 = 0
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ ＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ ＞＞＞ ＞ gmain.c:3054
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ ＞＞＞ ＞ address@hidden) at gmain.c:3630
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ ＞＞＞ ＞ util/main-loop.c:258
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
-＞ ＞＞＞ ＞ util/main-loop.c:506
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ ＞＞＞ ＞ out＞) at vl.c:4709
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞features
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $1 = 6
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ (gdb) p ioc-＞name
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ May be socket_accept_incoming_migration should
-＞ ＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ thank you.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ 原始邮件
-＞ ＞＞＞ ＞ address@hidden
-＞ ＞＞＞ ＞ address@hidden
-＞ ＞＞＞ ＞ address@hidden@huawei.com＞
-＞ ＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
-＞ ＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞＞＞ ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞＞＞ ＞ ＞ Do the colo have any plan for development?
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ In our internal version can run it successfully,
-＞ ＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
-＞ ＞＞＞ ＞ Next time if you have some question about COLO,
-＞ ＞＞＞ ＞ please cc me and zhanghailiang address@hidden
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ Thanks
-＞ ＞＞＞ ＞ Zhang Chen
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
-＞ ＞＞＞ ＞ ＞ (gdb) bt
-＞ ＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized 
-out＞,
-＞ ＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, 
-errp=0x0) at
-＞ ＞＞＞ ＞ ＞ io/channel-socket.c:497
-＞ ＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden "", address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:257
-＞ ＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:523
-＞ ＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:603
-＞ ＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message 
-(errp=0x7f3d62bfaa48,
-＞ ＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞＞＞ ＞ ＞ migration/colo.c:546
-＞ ＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞＞＞ ＞ ＞ migration/colo.c:649
-＞ ＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞ --
-＞ ＞＞＞ ＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞ --
-＞ ＞＞＞ ＞ Thanks
-＞ ＞＞＞ ＞ Zhang Chen
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞ ＞
-＞ ＞＞＞
-＞ ＞＞
-＞ ＞ --
-＞ ＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
-＞ ＞
-＞ ＞ .
-＞ ＞
-＞
-
diff --git a/results/classifier/005/mistranslation/74466963 b/results/classifier/005/mistranslation/74466963
deleted file mode 100644
index ceba0270..00000000
--- a/results/classifier/005/mistranslation/74466963
+++ /dev/null
@@ -1,1886 +0,0 @@
-mistranslation: 0.927
-assembly: 0.910
-device: 0.909
-instruction: 0.903
-KVM: 0.903
-graphic: 0.895
-boot: 0.894
-semantic: 0.891
-socket: 0.879
-vnc: 0.878
-other: 0.877
-network: 0.871
-
-[Qemu-devel] [TCG only][Migration Bug? ] Occasionally, the content of VM's memory is inconsistent between Source and Destination of migration
-
-Hi all,
-
-Does anyboday remember the similar issue post by hailiang months ago
-http://patchwork.ozlabs.org/patch/454322/
-At least tow bugs about migration had been fixed since that.
-And now we found the same issue at the tcg vm(kvm is fine), after
-migration, the content VM's memory is inconsistent.
-we add a patch to check memory content, you can find it from affix
-
-steps to reporduce:
-1) apply the patch and re-build qemu
-2) prepare the ubuntu guest and run memtest in grub.
-soruce side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off
-destination side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
-3) start migration
-with 1000M NIC, migration will finish within 3 min.
-
-at source:
-(qemu) migrate tcp:192.168.2.66:8881
-after saving ram complete
-e9e725df678d392b1a83b3a917f332bb
-qemu-system-x86_64: end ram md5
-(qemu)
-
-at destination:
-...skip...
-Completed load of VM with exit code 0 seq iteration 1264
-Completed load of VM with exit code 0 seq iteration 1265
-Completed load of VM with exit code 0 seq iteration 1266
-qemu-system-x86_64: after loading state section id 2(ram)
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
-
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-
-This occurs occasionally and only at tcg machine. It seems that
-some pages dirtied in source side don't transferred to destination.
-This problem can be reproduced even if we disable virtio.
-Is it OK for some pages that not transferred to destination when do
-migration ? Or is it a bug?
-Any idea...
-
-=================md5 check patch=============================
-
-diff --git a/Makefile.target b/Makefile.target
-index 962d004..e2cb8e9 100644
---- a/Makefile.target
-+++ b/Makefile.target
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
- obj-y += memory_mapping.o
- obj-y += dump.o
- obj-y += migration/ram.o migration/savevm.o
--LIBS := $(libs_softmmu) $(LIBS)
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
-
- # xen support
- obj-$(CONFIG_XEN) += xen-common.o
-diff --git a/migration/ram.c b/migration/ram.c
-index 1eb155a..3b7a09d 100644
---- a/migration/ram.c
-+++ b/migration/ram.c
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
-version_id)
-}
-
-     rcu_read_unlock();
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
-+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
-             "%" PRIu64 "\n", ret, seq_iter);
-     return ret;
- }
-diff --git a/migration/savevm.c b/migration/savevm.c
-index 0ad1b93..3feaa61 100644
---- a/migration/savevm.c
-+++ b/migration/savevm.c
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
-
- }
-
-+#include "exec/ram_addr.h"
-+#include "qemu/rcu_queue.h"
-+#include <clplumbing/md5.h>
-+#ifndef MD5_DIGEST_LENGTH
-+#define MD5_DIGEST_LENGTH 16
-+#endif
-+
-+static void check_host_md5(void)
-+{
-+    int i;
-+    unsigned char md[MD5_DIGEST_LENGTH];
-+    rcu_read_lock();
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
-'pc.ram' block */
-+    rcu_read_unlock();
-+
-+    MD5(block->host, block->used_length, md);
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
-+        fprintf(stderr, "%02x", md[i]);
-+    }
-+    fprintf(stderr, "\n");
-+    error_report("end ram md5");
-+}
-+
- void qemu_savevm_state_begin(QEMUFile *f,
-                              const MigrationParams *params)
- {
-@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile
-*f, bool iterable_only)
-save_section_header(f, se, QEMU_VM_SECTION_END);
-
-         ret = se->ops->save_live_complete_precopy(f, se->opaque);
-+
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
-+        check_host_md5();
-+
-         trace_savevm_section_end(se->idstr, se->section_id, ret);
-         save_section_footer(f, se);
-         if (ret < 0) {
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
-MigrationIncomingState *mis)
-section_id, le->se->idstr);
-                 return ret;
-             }
-+            if (section_type == QEMU_VM_SECTION_END) {
-+                error_report("after loading state section id %d(%s)",
-+                             section_id, le->se->idstr);
-+                check_host_md5();
-+            }
-             if (!check_section_footer(f, le)) {
-                 return -EINVAL;
-             }
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
-     }
-
-     cpu_synchronize_all_post_init();
-+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
-+    check_host_md5();
-
-     return ret;
- }
-
-* Li Zhijian (address@hidden) wrote:
->
-Hi all,
->
->
-Does anyboday remember the similar issue post by hailiang months ago
->
-http://patchwork.ozlabs.org/patch/454322/
->
-At least tow bugs about migration had been fixed since that.
-Yes, I wondered what happened to that.
-
->
-And now we found the same issue at the tcg vm(kvm is fine), after migration,
->
-the content VM's memory is inconsistent.
-Hmm, TCG only - I don't know much about that; but I guess something must
-be accessing memory without using the proper macros/functions so
-it doesn't mark it as dirty.
-
->
-we add a patch to check memory content, you can find it from affix
->
->
-steps to reporduce:
->
-1) apply the patch and re-build qemu
->
-2) prepare the ubuntu guest and run memtest in grub.
->
-soruce side:
->
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
-pc-i440fx-2.3,accel=tcg,usb=off
->
->
-destination side:
->
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
->
->
-3) start migration
->
-with 1000M NIC, migration will finish within 3 min.
->
->
-at source:
->
-(qemu) migrate tcp:192.168.2.66:8881
->
-after saving ram complete
->
-e9e725df678d392b1a83b3a917f332bb
->
-qemu-system-x86_64: end ram md5
->
-(qemu)
->
->
-at destination:
->
-...skip...
->
-Completed load of VM with exit code 0 seq iteration 1264
->
-Completed load of VM with exit code 0 seq iteration 1265
->
-Completed load of VM with exit code 0 seq iteration 1266
->
-qemu-system-x86_64: after loading state section id 2(ram)
->
-49c2dac7bde0e5e22db7280dcb3824f9
->
-qemu-system-x86_64: end ram md5
->
-qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
->
->
-49c2dac7bde0e5e22db7280dcb3824f9
->
-qemu-system-x86_64: end ram md5
->
->
-This occurs occasionally and only at tcg machine. It seems that
->
-some pages dirtied in source side don't transferred to destination.
->
-This problem can be reproduced even if we disable virtio.
->
->
-Is it OK for some pages that not transferred to destination when do
->
-migration ? Or is it a bug?
-I'm pretty sure that means it's a bug.  Hard to find though, I guess
-at least memtest is smaller than a big OS.  I think I'd dump the whole
-of memory on both sides, hexdump and diff them  - I'd guess it would
-just be one byte/word different, maybe that would offer some idea what
-wrote it.
-
-Dave
-
->
-Any idea...
->
->
-=================md5 check patch=============================
->
->
-diff --git a/Makefile.target b/Makefile.target
->
-index 962d004..e2cb8e9 100644
->
---- a/Makefile.target
->
-+++ b/Makefile.target
->
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
->
-obj-y += memory_mapping.o
->
-obj-y += dump.o
->
-obj-y += migration/ram.o migration/savevm.o
->
--LIBS := $(libs_softmmu) $(LIBS)
->
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
->
->
-# xen support
->
-obj-$(CONFIG_XEN) += xen-common.o
->
-diff --git a/migration/ram.c b/migration/ram.c
->
-index 1eb155a..3b7a09d 100644
->
---- a/migration/ram.c
->
-+++ b/migration/ram.c
->
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
->
-version_id)
->
-}
->
->
-rcu_read_unlock();
->
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
->
-+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
->
-"%" PRIu64 "\n", ret, seq_iter);
->
-return ret;
->
-}
->
-diff --git a/migration/savevm.c b/migration/savevm.c
->
-index 0ad1b93..3feaa61 100644
->
---- a/migration/savevm.c
->
-+++ b/migration/savevm.c
->
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
->
->
-}
->
->
-+#include "exec/ram_addr.h"
->
-+#include "qemu/rcu_queue.h"
->
-+#include <clplumbing/md5.h>
->
-+#ifndef MD5_DIGEST_LENGTH
->
-+#define MD5_DIGEST_LENGTH 16
->
-+#endif
->
-+
->
-+static void check_host_md5(void)
->
-+{
->
-+    int i;
->
-+    unsigned char md[MD5_DIGEST_LENGTH];
->
-+    rcu_read_lock();
->
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
->
-'pc.ram' block */
->
-+    rcu_read_unlock();
->
-+
->
-+    MD5(block->host, block->used_length, md);
->
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
->
-+        fprintf(stderr, "%02x", md[i]);
->
-+    }
->
-+    fprintf(stderr, "\n");
->
-+    error_report("end ram md5");
->
-+}
->
-+
->
-void qemu_savevm_state_begin(QEMUFile *f,
->
-const MigrationParams *params)
->
-{
->
-@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
->
-bool iterable_only)
->
-save_section_header(f, se, QEMU_VM_SECTION_END);
->
->
-ret = se->ops->save_live_complete_precopy(f, se->opaque);
->
-+
->
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
->
-+        check_host_md5();
->
-+
->
-trace_savevm_section_end(se->idstr, se->section_id, ret);
->
-save_section_footer(f, se);
->
-if (ret < 0) {
->
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
->
-MigrationIncomingState *mis)
->
-section_id, le->se->idstr);
->
-return ret;
->
-}
->
-+            if (section_type == QEMU_VM_SECTION_END) {
->
-+                error_report("after loading state section id %d(%s)",
->
-+                             section_id, le->se->idstr);
->
-+                check_host_md5();
->
-+            }
->
-if (!check_section_footer(f, le)) {
->
-return -EINVAL;
->
-}
->
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
->
-}
->
->
-cpu_synchronize_all_post_init();
->
-+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
->
-+    check_host_md5();
->
->
-return ret;
->
-}
->
->
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 2015/12/3 17:24, Dr. David Alan Gilbert wrote:
-* Li Zhijian (address@hidden) wrote:
-Hi all,
-
-Does anyboday remember the similar issue post by hailiang months ago
-http://patchwork.ozlabs.org/patch/454322/
-At least tow bugs about migration had been fixed since that.
-Yes, I wondered what happened to that.
-And now we found the same issue at the tcg vm(kvm is fine), after migration,
-the content VM's memory is inconsistent.
-Hmm, TCG only - I don't know much about that; but I guess something must
-be accessing memory without using the proper macros/functions so
-it doesn't mark it as dirty.
-we add a patch to check memory content, you can find it from affix
-
-steps to reporduce:
-1) apply the patch and re-build qemu
-2) prepare the ubuntu guest and run memtest in grub.
-soruce side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off
-
-destination side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
-
-3) start migration
-with 1000M NIC, migration will finish within 3 min.
-
-at source:
-(qemu) migrate tcp:192.168.2.66:8881
-after saving ram complete
-e9e725df678d392b1a83b3a917f332bb
-qemu-system-x86_64: end ram md5
-(qemu)
-
-at destination:
-...skip...
-Completed load of VM with exit code 0 seq iteration 1264
-Completed load of VM with exit code 0 seq iteration 1265
-Completed load of VM with exit code 0 seq iteration 1266
-qemu-system-x86_64: after loading state section id 2(ram)
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
-
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-
-This occurs occasionally and only at tcg machine. It seems that
-some pages dirtied in source side don't transferred to destination.
-This problem can be reproduced even if we disable virtio.
-
-Is it OK for some pages that not transferred to destination when do
-migration ? Or is it a bug?
-I'm pretty sure that means it's a bug.  Hard to find though, I guess
-at least memtest is smaller than a big OS.  I think I'd dump the whole
-of memory on both sides, hexdump and diff them  - I'd guess it would
-just be one byte/word different, maybe that would offer some idea what
-wrote it.
-Maybe one better way to do that is with the help of userfaultfd's write-protect
-capability. It is still in the development by Andrea Arcangeli, but there
-is a RFC version available, please refer to
-http://www.spinics.net/lists/linux-mm/msg97422.html
-（I'm developing live memory snapshot which based on it, maybe this is another 
-scene where we
-can use userfaultfd's WP ;) ).
-Dave
-Any idea...
-
-=================md5 check patch=============================
-
-diff --git a/Makefile.target b/Makefile.target
-index 962d004..e2cb8e9 100644
---- a/Makefile.target
-+++ b/Makefile.target
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
-  obj-y += memory_mapping.o
-  obj-y += dump.o
-  obj-y += migration/ram.o migration/savevm.o
--LIBS := $(libs_softmmu) $(LIBS)
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
-
-  # xen support
-  obj-$(CONFIG_XEN) += xen-common.o
-diff --git a/migration/ram.c b/migration/ram.c
-index 1eb155a..3b7a09d 100644
---- a/migration/ram.c
-+++ b/migration/ram.c
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
-version_id)
-      }
-
-      rcu_read_unlock();
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
-+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
-              "%" PRIu64 "\n", ret, seq_iter);
-      return ret;
-  }
-diff --git a/migration/savevm.c b/migration/savevm.c
-index 0ad1b93..3feaa61 100644
---- a/migration/savevm.c
-+++ b/migration/savevm.c
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
-
-  }
-
-+#include "exec/ram_addr.h"
-+#include "qemu/rcu_queue.h"
-+#include <clplumbing/md5.h>
-+#ifndef MD5_DIGEST_LENGTH
-+#define MD5_DIGEST_LENGTH 16
-+#endif
-+
-+static void check_host_md5(void)
-+{
-+    int i;
-+    unsigned char md[MD5_DIGEST_LENGTH];
-+    rcu_read_lock();
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
-'pc.ram' block */
-+    rcu_read_unlock();
-+
-+    MD5(block->host, block->used_length, md);
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
-+        fprintf(stderr, "%02x", md[i]);
-+    }
-+    fprintf(stderr, "\n");
-+    error_report("end ram md5");
-+}
-+
-  void qemu_savevm_state_begin(QEMUFile *f,
-                               const MigrationParams *params)
-  {
-@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
-bool iterable_only)
-          save_section_header(f, se, QEMU_VM_SECTION_END);
-
-          ret = se->ops->save_live_complete_precopy(f, se->opaque);
-+
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
-+        check_host_md5();
-+
-          trace_savevm_section_end(se->idstr, se->section_id, ret);
-          save_section_footer(f, se);
-          if (ret < 0) {
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
-MigrationIncomingState *mis)
-                               section_id, le->se->idstr);
-                  return ret;
-              }
-+            if (section_type == QEMU_VM_SECTION_END) {
-+                error_report("after loading state section id %d(%s)",
-+                             section_id, le->se->idstr);
-+                check_host_md5();
-+            }
-              if (!check_section_footer(f, le)) {
-                  return -EINVAL;
-              }
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
-      }
-
-      cpu_synchronize_all_post_init();
-+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
-+    check_host_md5();
-
-      return ret;
-  }
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-.
-
-On 12/03/2015 05:37 PM, Hailiang Zhang wrote:
-On 2015/12/3 17:24, Dr. David Alan Gilbert wrote:
-* Li Zhijian (address@hidden) wrote:
-Hi all,
-
-Does anyboday remember the similar issue post by hailiang months ago
-http://patchwork.ozlabs.org/patch/454322/
-At least tow bugs about migration had been fixed since that.
-Yes, I wondered what happened to that.
-And now we found the same issue at the tcg vm(kvm is fine), after
-migration,
-the content VM's memory is inconsistent.
-Hmm, TCG only - I don't know much about that; but I guess something must
-be accessing memory without using the proper macros/functions so
-it doesn't mark it as dirty.
-we add a patch to check memory content, you can find it from affix
-
-steps to reporduce:
-1) apply the patch and re-build qemu
-2) prepare the ubuntu guest and run memtest in grub.
-soruce side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
-
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off
-
-destination side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
-
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
-
-3) start migration
-with 1000M NIC, migration will finish within 3 min.
-
-at source:
-(qemu) migrate tcp:192.168.2.66:8881
-after saving ram complete
-e9e725df678d392b1a83b3a917f332bb
-qemu-system-x86_64: end ram md5
-(qemu)
-
-at destination:
-...skip...
-Completed load of VM with exit code 0 seq iteration 1264
-Completed load of VM with exit code 0 seq iteration 1265
-Completed load of VM with exit code 0 seq iteration 1266
-qemu-system-x86_64: after loading state section id 2(ram)
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-qemu-system-x86_64: qemu_loadvm_state: after
-cpu_synchronize_all_post_init
-
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-
-This occurs occasionally and only at tcg machine. It seems that
-some pages dirtied in source side don't transferred to destination.
-This problem can be reproduced even if we disable virtio.
-
-Is it OK for some pages that not transferred to destination when do
-migration ? Or is it a bug?
-I'm pretty sure that means it's a bug.  Hard to find though, I guess
-at least memtest is smaller than a big OS.  I think I'd dump the whole
-of memory on both sides, hexdump and diff them  - I'd guess it would
-just be one byte/word different, maybe that would offer some idea what
-wrote it.
-Maybe one better way to do that is with the help of userfaultfd's
-write-protect
-capability. It is still in the development by Andrea Arcangeli, but there
-is a RFC version available, please refer to
-http://www.spinics.net/lists/linux-mm/msg97422.html
-（I'm developing live memory snapshot which based on it, maybe this is
-another scene where we
-can use userfaultfd's WP ;) ).
-sounds good.
-
-thanks
-Li
-Dave
-Any idea...
-
-=================md5 check patch=============================
-
-diff --git a/Makefile.target b/Makefile.target
-index 962d004..e2cb8e9 100644
---- a/Makefile.target
-+++ b/Makefile.target
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
-  obj-y += memory_mapping.o
-  obj-y += dump.o
-  obj-y += migration/ram.o migration/savevm.o
--LIBS := $(libs_softmmu) $(LIBS)
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
-
-  # xen support
-  obj-$(CONFIG_XEN) += xen-common.o
-diff --git a/migration/ram.c b/migration/ram.c
-index 1eb155a..3b7a09d 100644
---- a/migration/ram.c
-+++ b/migration/ram.c
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
-version_id)
-      }
-
-      rcu_read_unlock();
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
-+    fprintf(stderr, "Completed load of VM with exit code %d seq
-iteration "
-              "%" PRIu64 "\n", ret, seq_iter);
-      return ret;
-  }
-diff --git a/migration/savevm.c b/migration/savevm.c
-index 0ad1b93..3feaa61 100644
---- a/migration/savevm.c
-+++ b/migration/savevm.c
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
-
-  }
-
-+#include "exec/ram_addr.h"
-+#include "qemu/rcu_queue.h"
-+#include <clplumbing/md5.h>
-+#ifndef MD5_DIGEST_LENGTH
-+#define MD5_DIGEST_LENGTH 16
-+#endif
-+
-+static void check_host_md5(void)
-+{
-+    int i;
-+    unsigned char md[MD5_DIGEST_LENGTH];
-+    rcu_read_lock();
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
-'pc.ram' block */
-+    rcu_read_unlock();
-+
-+    MD5(block->host, block->used_length, md);
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
-+        fprintf(stderr, "%02x", md[i]);
-+    }
-+    fprintf(stderr, "\n");
-+    error_report("end ram md5");
-+}
-+
-  void qemu_savevm_state_begin(QEMUFile *f,
-                               const MigrationParams *params)
-  {
-@@ -1056,6 +1079,10 @@ void
-qemu_savevm_state_complete_precopy(QEMUFile *f,
-bool iterable_only)
-          save_section_header(f, se, QEMU_VM_SECTION_END);
-
-          ret = se->ops->save_live_complete_precopy(f, se->opaque);
-+
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
-+        check_host_md5();
-+
-          trace_savevm_section_end(se->idstr, se->section_id, ret);
-          save_section_footer(f, se);
-          if (ret < 0) {
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
-MigrationIncomingState *mis)
-                               section_id, le->se->idstr);
-                  return ret;
-              }
-+            if (section_type == QEMU_VM_SECTION_END) {
-+                error_report("after loading state section id %d(%s)",
-+                             section_id, le->se->idstr);
-+                check_host_md5();
-+            }
-              if (!check_section_footer(f, le)) {
-                  return -EINVAL;
-              }
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
-      }
-
-      cpu_synchronize_all_post_init();
-+    error_report("%s: after cpu_synchronize_all_post_init\n",
-__func__);
-+    check_host_md5();
-
-      return ret;
-  }
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-.
-.
---
-Best regards.
-Li Zhijian (8555)
-
-On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote:
-* Li Zhijian (address@hidden) wrote:
-Hi all,
-
-Does anyboday remember the similar issue post by hailiang months ago
-http://patchwork.ozlabs.org/patch/454322/
-At least tow bugs about migration had been fixed since that.
-Yes, I wondered what happened to that.
-And now we found the same issue at the tcg vm(kvm is fine), after migration,
-the content VM's memory is inconsistent.
-Hmm, TCG only - I don't know much about that; but I guess something must
-be accessing memory without using the proper macros/functions so
-it doesn't mark it as dirty.
-we add a patch to check memory content, you can find it from affix
-
-steps to reporduce:
-1) apply the patch and re-build qemu
-2) prepare the ubuntu guest and run memtest in grub.
-soruce side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off
-
-destination side:
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
-
-3) start migration
-with 1000M NIC, migration will finish within 3 min.
-
-at source:
-(qemu) migrate tcp:192.168.2.66:8881
-after saving ram complete
-e9e725df678d392b1a83b3a917f332bb
-qemu-system-x86_64: end ram md5
-(qemu)
-
-at destination:
-...skip...
-Completed load of VM with exit code 0 seq iteration 1264
-Completed load of VM with exit code 0 seq iteration 1265
-Completed load of VM with exit code 0 seq iteration 1266
-qemu-system-x86_64: after loading state section id 2(ram)
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
-
-49c2dac7bde0e5e22db7280dcb3824f9
-qemu-system-x86_64: end ram md5
-
-This occurs occasionally and only at tcg machine. It seems that
-some pages dirtied in source side don't transferred to destination.
-This problem can be reproduced even if we disable virtio.
-
-Is it OK for some pages that not transferred to destination when do
-migration ? Or is it a bug?
-I'm pretty sure that means it's a bug.  Hard to find though, I guess
-at least memtest is smaller than a big OS.  I think I'd dump the whole
-of memory on both sides, hexdump and diff them  - I'd guess it would
-just be one byte/word different, maybe that would offer some idea what
-wrote it.
-I try to dump and compare them, more than 10 pages are different.
-in source side, they are random value rather than always 'FF' 'FB' 'EF'
-'BF'... in destination.
-and not all of the different pages are continuous.
-
-thanks
-Li
-Dave
-Any idea...
-
-=================md5 check patch=============================
-
-diff --git a/Makefile.target b/Makefile.target
-index 962d004..e2cb8e9 100644
---- a/Makefile.target
-+++ b/Makefile.target
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
-  obj-y += memory_mapping.o
-  obj-y += dump.o
-  obj-y += migration/ram.o migration/savevm.o
--LIBS := $(libs_softmmu) $(LIBS)
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
-
-  # xen support
-  obj-$(CONFIG_XEN) += xen-common.o
-diff --git a/migration/ram.c b/migration/ram.c
-index 1eb155a..3b7a09d 100644
---- a/migration/ram.c
-+++ b/migration/ram.c
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
-version_id)
-      }
-
-      rcu_read_unlock();
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
-+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
-              "%" PRIu64 "\n", ret, seq_iter);
-      return ret;
-  }
-diff --git a/migration/savevm.c b/migration/savevm.c
-index 0ad1b93..3feaa61 100644
---- a/migration/savevm.c
-+++ b/migration/savevm.c
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
-
-  }
-
-+#include "exec/ram_addr.h"
-+#include "qemu/rcu_queue.h"
-+#include <clplumbing/md5.h>
-+#ifndef MD5_DIGEST_LENGTH
-+#define MD5_DIGEST_LENGTH 16
-+#endif
-+
-+static void check_host_md5(void)
-+{
-+    int i;
-+    unsigned char md[MD5_DIGEST_LENGTH];
-+    rcu_read_lock();
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
-'pc.ram' block */
-+    rcu_read_unlock();
-+
-+    MD5(block->host, block->used_length, md);
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
-+        fprintf(stderr, "%02x", md[i]);
-+    }
-+    fprintf(stderr, "\n");
-+    error_report("end ram md5");
-+}
-+
-  void qemu_savevm_state_begin(QEMUFile *f,
-                               const MigrationParams *params)
-  {
-@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
-bool iterable_only)
-          save_section_header(f, se, QEMU_VM_SECTION_END);
-
-          ret = se->ops->save_live_complete_precopy(f, se->opaque);
-+
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
-+        check_host_md5();
-+
-          trace_savevm_section_end(se->idstr, se->section_id, ret);
-          save_section_footer(f, se);
-          if (ret < 0) {
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
-MigrationIncomingState *mis)
-                               section_id, le->se->idstr);
-                  return ret;
-              }
-+            if (section_type == QEMU_VM_SECTION_END) {
-+                error_report("after loading state section id %d(%s)",
-+                             section_id, le->se->idstr);
-+                check_host_md5();
-+            }
-              if (!check_section_footer(f, le)) {
-                  return -EINVAL;
-              }
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
-      }
-
-      cpu_synchronize_all_post_init();
-+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
-+    check_host_md5();
-
-      return ret;
-  }
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-
-.
---
-Best regards.
-Li Zhijian (8555)
-
-* Li Zhijian (address@hidden) wrote:
->
->
->
-On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote:
->
->* Li Zhijian (address@hidden) wrote:
->
->>Hi all,
->
->>
->
->>Does anyboday remember the similar issue post by hailiang months ago
->
->>
-http://patchwork.ozlabs.org/patch/454322/
->
->>At least tow bugs about migration had been fixed since that.
->
->
->
->Yes, I wondered what happened to that.
->
->
->
->>And now we found the same issue at the tcg vm(kvm is fine), after migration,
->
->>the content VM's memory is inconsistent.
->
->
->
->Hmm, TCG only - I don't know much about that; but I guess something must
->
->be accessing memory without using the proper macros/functions so
->
->it doesn't mark it as dirty.
->
->
->
->>we add a patch to check memory content, you can find it from affix
->
->>
->
->>steps to reporduce:
->
->>1) apply the patch and re-build qemu
->
->>2) prepare the ubuntu guest and run memtest in grub.
->
->>soruce side:
->
->>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
->>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
->>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
->>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
->>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
->>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
->>pc-i440fx-2.3,accel=tcg,usb=off
->
->>
->
->>destination side:
->
->>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
->>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
->>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
->>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
->>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
->>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
->>pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
->
->>
->
->>3) start migration
->
->>with 1000M NIC, migration will finish within 3 min.
->
->>
->
->>at source:
->
->>(qemu) migrate tcp:192.168.2.66:8881
->
->>after saving ram complete
->
->>e9e725df678d392b1a83b3a917f332bb
->
->>qemu-system-x86_64: end ram md5
->
->>(qemu)
->
->>
->
->>at destination:
->
->>...skip...
->
->>Completed load of VM with exit code 0 seq iteration 1264
->
->>Completed load of VM with exit code 0 seq iteration 1265
->
->>Completed load of VM with exit code 0 seq iteration 1266
->
->>qemu-system-x86_64: after loading state section id 2(ram)
->
->>49c2dac7bde0e5e22db7280dcb3824f9
->
->>qemu-system-x86_64: end ram md5
->
->>qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
->
->>
->
->>49c2dac7bde0e5e22db7280dcb3824f9
->
->>qemu-system-x86_64: end ram md5
->
->>
->
->>This occurs occasionally and only at tcg machine. It seems that
->
->>some pages dirtied in source side don't transferred to destination.
->
->>This problem can be reproduced even if we disable virtio.
->
->>
->
->>Is it OK for some pages that not transferred to destination when do
->
->>migration ? Or is it a bug?
->
->
->
->I'm pretty sure that means it's a bug.  Hard to find though, I guess
->
->at least memtest is smaller than a big OS.  I think I'd dump the whole
->
->of memory on both sides, hexdump and diff them  - I'd guess it would
->
->just be one byte/word different, maybe that would offer some idea what
->
->wrote it.
->
->
-I try to dump and compare them, more than 10 pages are different.
->
-in source side, they are random value rather than always 'FF' 'FB' 'EF'
->
-'BF'... in destination.
->
->
-and not all of the different pages are continuous.
-I wonder if it happens on all of memtest's different test patterns,
-perhaps it might be possible to narrow it down if you tell memtest
-to only run one test at a time.
-
-Dave
-
->
->
-thanks
->
-Li
->
->
->
->
->
->Dave
->
->
->
->>Any idea...
->
->>
->
->>=================md5 check patch=============================
->
->>
->
->>diff --git a/Makefile.target b/Makefile.target
->
->>index 962d004..e2cb8e9 100644
->
->>--- a/Makefile.target
->
->>+++ b/Makefile.target
->
->>@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
->
->>  obj-y += memory_mapping.o
->
->>  obj-y += dump.o
->
->>  obj-y += migration/ram.o migration/savevm.o
->
->>-LIBS := $(libs_softmmu) $(LIBS)
->
->>+LIBS := $(libs_softmmu) $(LIBS) -lplumb
->
->>
->
->>  # xen support
->
->>  obj-$(CONFIG_XEN) += xen-common.o
->
->>diff --git a/migration/ram.c b/migration/ram.c
->
->>index 1eb155a..3b7a09d 100644
->
->>--- a/migration/ram.c
->
->>+++ b/migration/ram.c
->
->>@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
->
->>version_id)
->
->>      }
->
->>
->
->>      rcu_read_unlock();
->
->>-    DPRINTF("Completed load of VM with exit code %d seq iteration "
->
->>+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
->
->>              "%" PRIu64 "\n", ret, seq_iter);
->
->>      return ret;
->
->>  }
->
->>diff --git a/migration/savevm.c b/migration/savevm.c
->
->>index 0ad1b93..3feaa61 100644
->
->>--- a/migration/savevm.c
->
->>+++ b/migration/savevm.c
->
->>@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
->
->>
->
->>  }
->
->>
->
->>+#include "exec/ram_addr.h"
->
->>+#include "qemu/rcu_queue.h"
->
->>+#include <clplumbing/md5.h>
->
->>+#ifndef MD5_DIGEST_LENGTH
->
->>+#define MD5_DIGEST_LENGTH 16
->
->>+#endif
->
->>+
->
->>+static void check_host_md5(void)
->
->>+{
->
->>+    int i;
->
->>+    unsigned char md[MD5_DIGEST_LENGTH];
->
->>+    rcu_read_lock();
->
->>+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
->
->>'pc.ram' block */
->
->>+    rcu_read_unlock();
->
->>+
->
->>+    MD5(block->host, block->used_length, md);
->
->>+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
->
->>+        fprintf(stderr, "%02x", md[i]);
->
->>+    }
->
->>+    fprintf(stderr, "\n");
->
->>+    error_report("end ram md5");
->
->>+}
->
->>+
->
->>  void qemu_savevm_state_begin(QEMUFile *f,
->
->>                               const MigrationParams *params)
->
->>  {
->
->>@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
->
->>bool iterable_only)
->
->>          save_section_header(f, se, QEMU_VM_SECTION_END);
->
->>
->
->>          ret = se->ops->save_live_complete_precopy(f, se->opaque);
->
->>+
->
->>+        fprintf(stderr, "after saving %s complete\n", se->idstr);
->
->>+        check_host_md5();
->
->>+
->
->>          trace_savevm_section_end(se->idstr, se->section_id, ret);
->
->>          save_section_footer(f, se);
->
->>          if (ret < 0) {
->
->>@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
->
->>MigrationIncomingState *mis)
->
->>                               section_id, le->se->idstr);
->
->>                  return ret;
->
->>              }
->
->>+            if (section_type == QEMU_VM_SECTION_END) {
->
->>+                error_report("after loading state section id %d(%s)",
->
->>+                             section_id, le->se->idstr);
->
->>+                check_host_md5();
->
->>+            }
->
->>              if (!check_section_footer(f, le)) {
->
->>                  return -EINVAL;
->
->>              }
->
->>@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
->
->>      }
->
->>
->
->>      cpu_synchronize_all_post_init();
->
->>+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
->
->>+    check_host_md5();
->
->>
->
->>      return ret;
->
->>  }
->
->>
->
->>
->
->>
->
->--
->
->Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
->
->
->
->.
->
->
->
->
---
->
-Best regards.
->
-Li Zhijian (8555)
->
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-Li Zhijian <address@hidden> wrote:
->
-Hi all,
->
->
-Does anyboday remember the similar issue post by hailiang months ago
->
-http://patchwork.ozlabs.org/patch/454322/
->
-At least tow bugs about migration had been fixed since that.
->
->
-And now we found the same issue at the tcg vm(kvm is fine), after
->
-migration, the content VM's memory is inconsistent.
->
->
-we add a patch to check memory content, you can find it from affix
->
->
-steps to reporduce:
->
-1) apply the patch and re-build qemu
->
-2) prepare the ubuntu guest and run memtest in grub.
->
-soruce side:
->
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
-pc-i440fx-2.3,accel=tcg,usb=off
->
->
-destination side:
->
-x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
->
-e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
->
-if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
->
-virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
->
--vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
->
-tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
->
-pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
->
->
-3) start migration
->
-with 1000M NIC, migration will finish within 3 min.
->
->
-at source:
->
-(qemu) migrate tcp:192.168.2.66:8881
->
-after saving ram complete
->
-e9e725df678d392b1a83b3a917f332bb
->
-qemu-system-x86_64: end ram md5
->
-(qemu)
->
->
-at destination:
->
-...skip...
->
-Completed load of VM with exit code 0 seq iteration 1264
->
-Completed load of VM with exit code 0 seq iteration 1265
->
-Completed load of VM with exit code 0 seq iteration 1266
->
-qemu-system-x86_64: after loading state section id 2(ram)
->
-49c2dac7bde0e5e22db7280dcb3824f9
->
-qemu-system-x86_64: end ram md5
->
-qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
->
->
-49c2dac7bde0e5e22db7280dcb3824f9
->
-qemu-system-x86_64: end ram md5
->
->
-This occurs occasionally and only at tcg machine. It seems that
->
-some pages dirtied in source side don't transferred to destination.
->
-This problem can be reproduced even if we disable virtio.
->
->
-Is it OK for some pages that not transferred to destination when do
->
-migration ? Or is it a bug?
->
->
-Any idea...
-Thanks for describing how to reproduce the bug.
-If some pages are not transferred to destination then it is a bug, so we
-need to know what the problem is, notice that the problem can be that
-TCG is not marking dirty some page, that Migration code "forgets" about
-that page, or anything eles altogether, that is what we need to find.
-
-There are more posibilities, I am not sure that memtest is on 32bit
-mode, and it is inside posibility that we are missing some state when we
-are on real mode.
-
-Will try to take a look at this.
-
-THanks, again.
-
-
->
->
-=================md5 check patch=============================
->
->
-diff --git a/Makefile.target b/Makefile.target
->
-index 962d004..e2cb8e9 100644
->
---- a/Makefile.target
->
-+++ b/Makefile.target
->
-@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
->
-obj-y += memory_mapping.o
->
-obj-y += dump.o
->
-obj-y += migration/ram.o migration/savevm.o
->
--LIBS := $(libs_softmmu) $(LIBS)
->
-+LIBS := $(libs_softmmu) $(LIBS) -lplumb
->
->
-# xen support
->
-obj-$(CONFIG_XEN) += xen-common.o
->
-diff --git a/migration/ram.c b/migration/ram.c
->
-index 1eb155a..3b7a09d 100644
->
---- a/migration/ram.c
->
-+++ b/migration/ram.c
->
-@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque,
->
-int version_id)
->
-}
->
->
-rcu_read_unlock();
->
--    DPRINTF("Completed load of VM with exit code %d seq iteration "
->
-+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
->
-"%" PRIu64 "\n", ret, seq_iter);
->
-return ret;
->
-}
->
-diff --git a/migration/savevm.c b/migration/savevm.c
->
-index 0ad1b93..3feaa61 100644
->
---- a/migration/savevm.c
->
-+++ b/migration/savevm.c
->
-@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
->
->
-}
->
->
-+#include "exec/ram_addr.h"
->
-+#include "qemu/rcu_queue.h"
->
-+#include <clplumbing/md5.h>
->
-+#ifndef MD5_DIGEST_LENGTH
->
-+#define MD5_DIGEST_LENGTH 16
->
-+#endif
->
-+
->
-+static void check_host_md5(void)
->
-+{
->
-+    int i;
->
-+    unsigned char md[MD5_DIGEST_LENGTH];
->
-+    rcu_read_lock();
->
-+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
->
-'pc.ram' block */
->
-+    rcu_read_unlock();
->
-+
->
-+    MD5(block->host, block->used_length, md);
->
-+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
->
-+        fprintf(stderr, "%02x", md[i]);
->
-+    }
->
-+    fprintf(stderr, "\n");
->
-+    error_report("end ram md5");
->
-+}
->
-+
->
-void qemu_savevm_state_begin(QEMUFile *f,
->
-const MigrationParams *params)
->
-{
->
-@@ -1056,6 +1079,10 @@ void
->
-qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only)
->
-save_section_header(f, se, QEMU_VM_SECTION_END);
->
->
-ret = se->ops->save_live_complete_precopy(f, se->opaque);
->
-+
->
-+        fprintf(stderr, "after saving %s complete\n", se->idstr);
->
-+        check_host_md5();
->
-+
->
-trace_savevm_section_end(se->idstr, se->section_id, ret);
->
-save_section_footer(f, se);
->
-if (ret < 0) {
->
-@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
->
-MigrationIncomingState *mis)
->
-section_id, le->se->idstr);
->
-return ret;
->
-}
->
-+            if (section_type == QEMU_VM_SECTION_END) {
->
-+                error_report("after loading state section id %d(%s)",
->
-+                             section_id, le->se->idstr);
->
-+                check_host_md5();
->
-+            }
->
-if (!check_section_footer(f, le)) {
->
-return -EINVAL;
->
-}
->
-@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
->
-}
->
->
-cpu_synchronize_all_post_init();
->
-+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
->
-+    check_host_md5();
->
->
-return ret;
->
-}
-
->
->
-Thanks for describing how to reproduce the bug.
->
-If some pages are not transferred to destination then it is a bug, so we need
->
-to know what the problem is, notice that the problem can be that TCG is not
->
-marking dirty some page, that Migration code "forgets" about that page, or
->
-anything eles altogether, that is what we need to find.
->
->
-There are more posibilities, I am not sure that memtest is on 32bit mode, and
->
-it is inside posibility that we are missing some state when we are on real
->
-mode.
->
->
-Will try to take a look at this.
->
->
-THanks, again.
->
-Hi Juan & Amit
-
- Do you think we should add a mechanism to check the data integrity during LM 
-like Zhijian's patch did?  it may be very helpful for developers. 
- Actually, I did the similar thing before in order to make sure that I did the 
-right thing we I change the code related to LM.
-
-Liang
-
-On (Fri) 04 Dec 2015 [01:43:07], Li, Liang Z wrote:
->
->
->
-> Thanks for describing how to reproduce the bug.
->
-> If some pages are not transferred to destination then it is a bug, so we
->
-> need
->
-> to know what the problem is, notice that the problem can be that TCG is not
->
-> marking dirty some page, that Migration code "forgets" about that page, or
->
-> anything eles altogether, that is what we need to find.
->
->
->
-> There are more posibilities, I am not sure that memtest is on 32bit mode,
->
-> and
->
-> it is inside posibility that we are missing some state when we are on real
->
-> mode.
->
->
->
-> Will try to take a look at this.
->
->
->
-> THanks, again.
->
->
->
->
-Hi Juan & Amit
->
->
-Do you think we should add a mechanism to check the data integrity during LM
->
-like Zhijian's patch did?  it may be very helpful for developers.
->
-Actually, I did the similar thing before in order to make sure that I did
->
-the right thing we I change the code related to LM.
-If you mean for debugging, something that's not always on, then I'm
-fine with it.
-
-A script that goes along that shows the result of comparison of the
-diff will be helpful too, something that shows how many pages are
-differnt, how many bytes in a page on average, and so on.
-
-                Amit
-
diff --git a/results/classifier/005/mistranslation/74545755 b/results/classifier/005/mistranslation/74545755
deleted file mode 100644
index 7f5ace50..00000000
--- a/results/classifier/005/mistranslation/74545755
+++ /dev/null
@@ -1,352 +0,0 @@
-mistranslation: 0.752
-device: 0.720
-instruction: 0.700
-other: 0.683
-semantic: 0.669
-KVM: 0.661
-graphic: 0.660
-vnc: 0.650
-assembly: 0.648
-boot: 0.607
-network: 0.550
-socket: 0.549
-
-[Bug Report][RFC PATCH 0/1] block: fix failing assert on paused VM migration
-
-There's a bug (failing assert) which is reproduced during migration of
-a paused VM.  I am able to reproduce it on a stand with 2 nodes and a common
-NFS share, with VM's disk on that share.
-
-root@fedora40-1-vm:~# virsh domblklist alma8-vm
- Target   Source
-------------------------------------------
- sda      /mnt/shared/images/alma8.qcow2
-
-root@fedora40-1-vm:~# df -Th /mnt/shared
-Filesystem          Type  Size  Used Avail Use% Mounted on
-127.0.0.1:/srv/nfsd nfs4   63G   16G   48G  25% /mnt/shared
-
-On the 1st node:
-
-root@fedora40-1-vm:~# virsh start alma8-vm ; virsh suspend alma8-vm
-root@fedora40-1-vm:~# virsh migrate --compressed --p2p --persistent 
---undefinesource --live alma8-vm qemu+ssh://fedora40-2-vm/system
-
-Then on the 2nd node:
-
-root@fedora40-2-vm:~# virsh migrate --compressed --p2p --persistent 
---undefinesource --live alma8-vm qemu+ssh://fedora40-1-vm/system
-error: operation failed: domain is not running
-
-root@fedora40-2-vm:~# tail -3 /var/log/libvirt/qemu/alma8-vm.log
-2024-09-19 13:53:33.336+0000: initiating migration
-qemu-system-x86_64: ../block.c:6976: int 
-bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & 
-BDRV_O_INACTIVE)' failed.
-2024-09-19 13:53:42.991+0000: shutting down, reason=crashed
-
-Backtrace:
-
-(gdb) bt
-#0  0x00007f7eaa2f1664 in __pthread_kill_implementation () at /lib64/libc.so.6
-#1  0x00007f7eaa298c4e in raise () at /lib64/libc.so.6
-#2  0x00007f7eaa280902 in abort () at /lib64/libc.so.6
-#3  0x00007f7eaa28081e in __assert_fail_base.cold () at /lib64/libc.so.6
-#4  0x00007f7eaa290d87 in __assert_fail () at /lib64/libc.so.6
-#5  0x0000563c38b95eb8 in bdrv_inactivate_recurse (bs=0x563c3b6c60c0) at 
-../block.c:6976
-#6  0x0000563c38b95aeb in bdrv_inactivate_all () at ../block.c:7038
-#7  0x0000563c3884d354 in qemu_savevm_state_complete_precopy_non_iterable 
-(f=0x563c3b700c20, in_postcopy=false, inactivate_disks=true)
-    at ../migration/savevm.c:1571
-#8  0x0000563c3884dc1a in qemu_savevm_state_complete_precopy (f=0x563c3b700c20, 
-iterable_only=false, inactivate_disks=true) at ../migration/savevm.c:1631
-#9  0x0000563c3883a340 in migration_completion_precopy (s=0x563c3b4d51f0, 
-current_active_state=<optimized out>) at ../migration/migration.c:2780
-#10 migration_completion (s=0x563c3b4d51f0) at ../migration/migration.c:2844
-#11 migration_iteration_run (s=0x563c3b4d51f0) at ../migration/migration.c:3270
-#12 migration_thread (opaque=0x563c3b4d51f0) at ../migration/migration.c:3536
-#13 0x0000563c38dbcf14 in qemu_thread_start (args=0x563c3c2d5bf0) at 
-../util/qemu-thread-posix.c:541
-#14 0x00007f7eaa2ef6d7 in start_thread () at /lib64/libc.so.6
-#15 0x00007f7eaa373414 in clone () at /lib64/libc.so.6
-
-What happens here is that after 1st migration BDS related to HDD remains
-inactive as VM is still paused.  Then when we initiate 2nd migration,
-bdrv_inactivate_all() leads to the attempt to set BDRV_O_INACTIVE flag
-on that node which is already set, thus assert fails.
-
-Attached patch which simply skips setting flag if it's already set is more
-of a kludge than a clean solution.  Should we use more sophisticated logic
-which allows some of the nodes be in inactive state prior to the migration,
-and takes them into account during bdrv_inactivate_all()?  Comments would
-be appreciated.
-
-Andrey
-
-Andrey Drobyshev (1):
-  block: do not fail when inactivating node which is inactive
-
- block.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
--- 
-2.39.3
-
-Instead of throwing an assert let's just ignore that flag is already set
-and return.  We assume that it's going to be safe to ignore.  Otherwise
-this assert fails when migrating a paused VM back and forth.
-
-Ideally we'd like to have a more sophisticated solution, e.g. not even
-scan the nodes which should be inactive at this point.
-
-Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
----
- block.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
-diff --git a/block.c b/block.c
-index 7d90007cae..c1dcf906d1 100644
---- a/block.c
-+++ b/block.c
-@@ -6973,7 +6973,15 @@ static int GRAPH_RDLOCK 
-bdrv_inactivate_recurse(BlockDriverState *bs)
-         return 0;
-     }
- 
--    assert(!(bs->open_flags & BDRV_O_INACTIVE));
-+    if (bs->open_flags & BDRV_O_INACTIVE) {
-+        /*
-+         * Return here instead of throwing assert as a workaround to
-+         * prevent failure on migrating paused VM.
-+         * Here we assume that if we're trying to inactivate BDS that's
-+         * already inactive, it's safe to just ignore it.
-+         */
-+        return 0;
-+    }
- 
-     /* Inactivate this node */
-     if (bs->drv->bdrv_inactivate) {
--- 
-2.39.3
-
-[add migration maintainers]
-
-On 24.09.24 15:56, Andrey Drobyshev wrote:
-Instead of throwing an assert let's just ignore that flag is already set
-and return.  We assume that it's going to be safe to ignore.  Otherwise
-this assert fails when migrating a paused VM back and forth.
-
-Ideally we'd like to have a more sophisticated solution, e.g. not even
-scan the nodes which should be inactive at this point.
-
-Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
----
-  block.c | 10 +++++++++-
-  1 file changed, 9 insertions(+), 1 deletion(-)
-
-diff --git a/block.c b/block.c
-index 7d90007cae..c1dcf906d1 100644
---- a/block.c
-+++ b/block.c
-@@ -6973,7 +6973,15 @@ static int GRAPH_RDLOCK 
-bdrv_inactivate_recurse(BlockDriverState *bs)
-          return 0;
-      }
--    assert(!(bs->open_flags & BDRV_O_INACTIVE));
-+    if (bs->open_flags & BDRV_O_INACTIVE) {
-+        /*
-+         * Return here instead of throwing assert as a workaround to
-+         * prevent failure on migrating paused VM.
-+         * Here we assume that if we're trying to inactivate BDS that's
-+         * already inactive, it's safe to just ignore it.
-+         */
-+        return 0;
-+    }
-/* Inactivate this node */
-if (bs->drv->bdrv_inactivate) {
-I doubt that this a correct way to go.
-
-As far as I understand, "inactive" actually means that "storage is not belong to 
-qemu, but to someone else (another qemu process for example), and may be changed 
-transparently". In turn this means that Qemu should do nothing with inactive disks. So the 
-problem is that nobody called bdrv_activate_all on target, and we shouldn't ignore that.
-
-Hmm, I see in process_incoming_migration_bh() we do call bdrv_activate_all(), 
-but only in some scenarios. May be, the condition should be less strict here.
-
-Why we need any condition here at all? Don't we want to activate block-layer on 
-target after migration anyway?
-
---
-Best regards,
-Vladimir
-
-On 9/30/24 12:25 PM, Vladimir Sementsov-Ogievskiy wrote:
->
-[add migration maintainers]
->
->
-On 24.09.24 15:56, Andrey Drobyshev wrote:
->
-> [...]
->
->
-I doubt that this a correct way to go.
->
->
-As far as I understand, "inactive" actually means that "storage is not
->
-belong to qemu, but to someone else (another qemu process for example),
->
-and may be changed transparently". In turn this means that Qemu should
->
-do nothing with inactive disks. So the problem is that nobody called
->
-bdrv_activate_all on target, and we shouldn't ignore that.
->
->
-Hmm, I see in process_incoming_migration_bh() we do call
->
-bdrv_activate_all(), but only in some scenarios. May be, the condition
->
-should be less strict here.
->
->
-Why we need any condition here at all? Don't we want to activate
->
-block-layer on target after migration anyway?
->
-Hmm I'm not sure about the unconditional activation, since we at least
-have to honor LATE_BLOCK_ACTIVATE cap if it's set (and probably delay it
-in such a case).  In current libvirt upstream I see such code:
-
->
-/* Migration capabilities which should always be enabled as long as they
->
->
-* are supported by QEMU. If the capability is supposed to be enabled on both
->
->
-* sides of migration, it won't be enabled unless both sides support it.
->
->
-*/
->
->
-static const qemuMigrationParamsAlwaysOnItem qemuMigrationParamsAlwaysOn[] =
->
-{
->
->
-{QEMU_MIGRATION_CAP_PAUSE_BEFORE_SWITCHOVER,
->
->
-QEMU_MIGRATION_SOURCE},
->
->
->
->
-{QEMU_MIGRATION_CAP_LATE_BLOCK_ACTIVATE,
->
->
-QEMU_MIGRATION_DESTINATION},
->
->
-};
-which means that libvirt always wants LATE_BLOCK_ACTIVATE to be set.
-
-The code from process_incoming_migration_bh() you're referring to:
-
->
-/* If capability late_block_activate is set:
->
->
-* Only fire up the block code now if we're going to restart the
->
->
-* VM, else 'cont' will do it.
->
->
-* This causes file locking to happen; so we don't want it to happen
->
->
-* unless we really are starting the VM.
->
->
-*/
->
->
-if (!migrate_late_block_activate() ||
->
->
-(autostart && (!global_state_received() ||
->
->
-runstate_is_live(global_state_get_runstate())))) {
->
->
-/* Make sure all file formats throw away their mutable metadata.
->
->
->
-* If we get an error here, just don't restart the VM yet. */
->
->
-bdrv_activate_all(&local_err);
->
->
-if (local_err) {
->
->
-error_report_err(local_err);
->
->
-local_err = NULL;
->
->
-autostart = false;
->
->
-}
->
->
-}
-It states explicitly that we're either going to start VM right at this
-point if (autostart == true), or we wait till "cont" command happens.
-None of this is going to happen if we start another migration while
-still being in PAUSED state.  So I think it seems reasonable to take
-such case into account.  For instance, this patch does prevent the crash:
-
->
-diff --git a/migration/migration.c b/migration/migration.c
->
-index ae2be31557..3222f6745b 100644
->
---- a/migration/migration.c
->
-+++ b/migration/migration.c
->
-@@ -733,7 +733,8 @@ static void process_incoming_migration_bh(void *opaque)
->
-*/
->
-if (!migrate_late_block_activate() ||
->
-(autostart && (!global_state_received() ||
->
--            runstate_is_live(global_state_get_runstate())))) {
->
-+            runstate_is_live(global_state_get_runstate()))) ||
->
-+         (!autostart && global_state_get_runstate() == RUN_STATE_PAUSED)) {
->
-/* Make sure all file formats throw away their mutable metadata.
->
-* If we get an error here, just don't restart the VM yet. */
->
-bdrv_activate_all(&local_err);
-What are your thoughts on it?
-
-Andrey
-
diff --git a/results/classifier/005/mistranslation/80604314 b/results/classifier/005/mistranslation/80604314
deleted file mode 100644
index cb64e7d6..00000000
--- a/results/classifier/005/mistranslation/80604314
+++ /dev/null
@@ -1,1488 +0,0 @@
-mistranslation: 0.922
-device: 0.917
-graphic: 0.901
-other: 0.898
-KVM: 0.891
-semantic: 0.890
-assembly: 0.886
-socket: 0.884
-vnc: 0.881
-instruction: 0.877
-network: 0.865
-boot: 0.860
-
-[BUG] vhost-vdpa: qemu-system-s390x crashes with second virtio-net-ccw device
-
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>, 
-    config=0x55d6ad9e3f80 "RT") at /home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-
-Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
-the autogenerated virtio-net-ccw device is present) works. Specifying
-several "-device virtio-net-pci" works as well.
-
-Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
-client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
-works (in-between state does not compile).
-
-This is reproducible with tcg as well. Same problem both with
---enable-vhost-vdpa and --disable-vhost-vdpa.
-
-Have not yet tried to figure out what might be special with
-virtio-ccw... anyone have an idea?
-
-[This should probably be considered a blocker?]
-
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
-When I start qemu with a second virtio-net-ccw device (i.e. adding
->
--device virtio-net-ccw in addition to the autogenerated device), I get
->
-a segfault. gdb points to
->
->
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
-config=0x55d6ad9e3f80 "RT") at
->
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-146       if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
->
-(backtrace doesn't go further)
->
->
-Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
->
-the autogenerated virtio-net-ccw device is present) works. Specifying
->
-several "-device virtio-net-pci" works as well.
->
->
-Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
->
-client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
->
-works (in-between state does not compile).
-Ouch. I didn't test all in-between states :(
-But I wish we had a 0-day instrastructure like kernel has,
-that catches things like that.
-
->
-This is reproducible with tcg as well. Same problem both with
->
---enable-vhost-vdpa and --disable-vhost-vdpa.
->
->
-Have not yet tried to figure out what might be special with
->
-virtio-ccw... anyone have an idea?
->
->
-[This should probably be considered a blocker?]
-
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin" <mst@redhat.com> wrote:
-
->
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
-> When I start qemu with a second virtio-net-ccw device (i.e. adding
->
-> -device virtio-net-ccw in addition to the autogenerated device), I get
->
-> a segfault. gdb points to
->
->
->
-> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
->     config=0x55d6ad9e3f80 "RT") at
->
-> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-> 146     if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
->
->
-> (backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-
->
->
->
-> Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
->
-> the autogenerated virtio-net-ccw device is present) works. Specifying
->
-> several "-device virtio-net-pci" works as well.
->
->
->
-> Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
->
-> client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
->
-> works (in-between state does not compile).
->
->
-Ouch. I didn't test all in-between states :(
->
-But I wish we had a 0-day instrastructure like kernel has,
->
-that catches things like that.
-Yep, that would be useful... so patchew only builds the complete series?
-
->
->
-> This is reproducible with tcg as well. Same problem both with
->
-> --enable-vhost-vdpa and --disable-vhost-vdpa.
->
->
->
-> Have not yet tried to figure out what might be special with
->
-> virtio-ccw... anyone have an idea?
->
->
->
-> [This should probably be considered a blocker?]
-I think so, as it makes s390x unusable with more that one
-virtio-net-ccw device, and I don't even see a workaround.
-
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
-On Fri, 24 Jul 2020 09:30:58 -0400
->
-"Michael S. Tsirkin" <mst@redhat.com> wrote:
->
->
-> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
-> > When I start qemu with a second virtio-net-ccw device (i.e. adding
->
-> > -device virtio-net-ccw in addition to the autogenerated device), I get
->
-> > a segfault. gdb points to
->
-> >
->
-> > #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
-> >     config=0x55d6ad9e3f80 "RT") at
->
-> > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-> > 146           if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
-> >
->
-> > (backtrace doesn't go further)
->
->
-The core was incomplete, but running under gdb directly shows that it
->
-is just a bog-standard config space access (first for that device).
->
->
-The cause of the crash is that nc->peer is not set... no idea how that
->
-can happen, not that familiar with that part of QEMU. (Should the code
->
-check, or is that really something that should not happen?)
->
->
-What I don't understand is why it is set correctly for the first,
->
-autogenerated virtio-net-ccw device, but not for the second one, and
->
-why virtio-net-pci doesn't show these problems. The only difference
->
-between -ccw and -pci that comes to my mind here is that config space
->
-accesses for ccw are done via an asynchronous operation, so timing
->
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-
->
-> >
->
-> > Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
->
-> > the autogenerated virtio-net-ccw device is present) works. Specifying
->
-> > several "-device virtio-net-pci" works as well.
->
-> >
->
-> > Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
->
-> > client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
->
-> > works (in-between state does not compile).
->
->
->
-> Ouch. I didn't test all in-between states :(
->
-> But I wish we had a 0-day instrastructure like kernel has,
->
-> that catches things like that.
->
->
-Yep, that would be useful... so patchew only builds the complete series?
->
->
->
->
-> > This is reproducible with tcg as well. Same problem both with
->
-> > --enable-vhost-vdpa and --disable-vhost-vdpa.
->
-> >
->
-> > Have not yet tried to figure out what might be special with
->
-> > virtio-ccw... anyone have an idea?
->
-> >
->
-> > [This should probably be considered a blocker?]
->
->
-I think so, as it makes s390x unusable with more that one
->
-virtio-net-ccw device, and I don't even see a workaround.
-
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin" <mst@redhat.com> wrote:
-
->
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
-> On Fri, 24 Jul 2020 09:30:58 -0400
->
-> "Michael S. Tsirkin" <mst@redhat.com> wrote:
->
->
->
-> > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
-> > > When I start qemu with a second virtio-net-ccw device (i.e. adding
->
-> > > -device virtio-net-ccw in addition to the autogenerated device), I get
->
-> > > a segfault. gdb points to
->
-> > >
->
-> > > #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
-> > >     config=0x55d6ad9e3f80 "RT") at
->
-> > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-> > > 146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
-> > >
->
-> > > (backtrace doesn't go further)
->
->
->
-> The core was incomplete, but running under gdb directly shows that it
->
-> is just a bog-standard config space access (first for that device).
->
->
->
-> The cause of the crash is that nc->peer is not set... no idea how that
->
-> can happen, not that familiar with that part of QEMU. (Should the code
->
-> check, or is that really something that should not happen?)
->
->
->
-> What I don't understand is why it is set correctly for the first,
->
-> autogenerated virtio-net-ccw device, but not for the second one, and
->
-> why virtio-net-pci doesn't show these problems. The only difference
->
-> between -ccw and -pci that comes to my mind here is that config space
->
-> accesses for ccw are done via an asynchronous operation, so timing
->
-> might be different.
->
->
-Hopefully Jason has an idea. Could you post a full command line
->
-please? Do you need a working guest to trigger this? Does this trigger
->
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on 
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001 
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0 
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
- 
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-
->
->
-> > >
->
-> > > Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
->
-> > > the autogenerated virtio-net-ccw device is present) works. Specifying
->
-> > > several "-device virtio-net-pci" works as well.
->
-> > >
->
-> > > Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
->
-> > > client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
->
-> > > works (in-between state does not compile).
->
-> >
->
-> > Ouch. I didn't test all in-between states :(
->
-> > But I wish we had a 0-day instrastructure like kernel has,
->
-> > that catches things like that.
->
->
->
-> Yep, that would be useful... so patchew only builds the complete series?
->
->
->
-> >
->
-> > > This is reproducible with tcg as well. Same problem both with
->
-> > > --enable-vhost-vdpa and --disable-vhost-vdpa.
->
-> > >
->
-> > > Have not yet tried to figure out what might be special with
->
-> > > virtio-ccw... anyone have an idea?
->
-> > >
->
-> > > [This should probably be considered a blocker?]
->
->
->
-> I think so, as it makes s390x unusable with more that one
->
-> virtio-net-ccw device, and I don't even see a workaround.
->
-
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
-     config=0x55d6ad9e3f80 "RT") at 
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-It looks to me we forget the check the existence of peer.
-
-Please try the attached patch to see if it works.
-
-Thanks
-0001-virtio-net-check-the-existence-of-peer-before-accesi.patch
-Description:
-Text Data
-
-On Sat, 25 Jul 2020 08:40:07 +0800
-Jason Wang <jasowang@redhat.com> wrote:
-
->
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
->
-> On Fri, 24 Jul 2020 11:17:57 -0400
->
-> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
->
->
->> On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
->>> On Fri, 24 Jul 2020 09:30:58 -0400
->
->>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
->>>
->
->>>> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
->>>>> When I start qemu with a second virtio-net-ccw device (i.e. adding
->
->>>>> -device virtio-net-ccw in addition to the autogenerated device), I get
->
->>>>> a segfault. gdb points to
->
->>>>>
->
->>>>> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
->>>>>      config=0x55d6ad9e3f80 "RT") at
->
->>>>> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
->>>>> 146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
->>>>>
->
->>>>> (backtrace doesn't go further)
->
->>> The core was incomplete, but running under gdb directly shows that it
->
->>> is just a bog-standard config space access (first for that device).
->
->>>
->
->>> The cause of the crash is that nc->peer is not set... no idea how that
->
->>> can happen, not that familiar with that part of QEMU. (Should the code
->
->>> check, or is that really something that should not happen?)
->
->>>
->
->>> What I don't understand is why it is set correctly for the first,
->
->>> autogenerated virtio-net-ccw device, but not for the second one, and
->
->>> why virtio-net-pci doesn't show these problems. The only difference
->
->>> between -ccw and -pci that comes to my mind here is that config space
->
->>> accesses for ccw are done via an asynchronous operation, so timing
->
->>> might be different.
->
->> Hopefully Jason has an idea. Could you post a full command line
->
->> please? Do you need a working guest to trigger this? Does this trigger
->
->> on an x86 host?
->
-> Yes, it does trigger with tcg-on-x86 as well. I've been using
->
->
->
-> s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
->
-> qemu,zpci=on
->
-> -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
->
-> -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
->
-> -device
->
-> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
->
-> -device virtio-net-ccw
->
->
->
-> It seems it needs the guest actually doing something with the nics; I
->
-> cannot reproduce the crash if I use the old advent calendar moon buggy
->
-> image and just add a virtio-net-ccw device.
->
->
->
-> (I don't think it's a problem with my local build, as I see the problem
->
-> both on my laptop and on an LPAR.)
->
->
->
-It looks to me we forget the check the existence of peer.
->
->
-Please try the attached patch to see if it works.
-Thanks, that patch gets my guest up and running again. So, FWIW,
-
-Tested-by: Cornelia Huck <cohuck@redhat.com>
-
-Any idea why this did not hit with virtio-net-pci (or the autogenerated
-virtio-net-ccw device)?
-
-On 2020/7/27 下午2:43, Cornelia Huck wrote:
-On Sat, 25 Jul 2020 08:40:07 +0800
-Jason Wang <jasowang@redhat.com> wrote:
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
-      config=0x55d6ad9e3f80 "RT") at 
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-It looks to me we forget the check the existence of peer.
-
-Please try the attached patch to see if it works.
-Thanks, that patch gets my guest up and running again. So, FWIW,
-
-Tested-by: Cornelia Huck <cohuck@redhat.com>
-
-Any idea why this did not hit with virtio-net-pci (or the autogenerated
-virtio-net-ccw device)?
-It can be hit with virtio-net-pci as well (just start without peer).
-For autogenerated virtio-net-cww, I think the reason is that it has
-already had a peer set.
-Thanks
-
-On Mon, 27 Jul 2020 15:38:12 +0800
-Jason Wang <jasowang@redhat.com> wrote:
-
->
-On 2020/7/27 下午2:43, Cornelia Huck wrote:
->
-> On Sat, 25 Jul 2020 08:40:07 +0800
->
-> Jason Wang <jasowang@redhat.com> wrote:
->
->
->
->> On 2020/7/24 下午11:34, Cornelia Huck wrote:
->
->>> On Fri, 24 Jul 2020 11:17:57 -0400
->
->>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
->>>
->
->>>> On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
->>>>> On Fri, 24 Jul 2020 09:30:58 -0400
->
->>>>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
->>>>>
->
->>>>>> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
->>>>>>> When I start qemu with a second virtio-net-ccw device (i.e. adding
->
->>>>>>> -device virtio-net-ccw in addition to the autogenerated device), I get
->
->>>>>>> a segfault. gdb points to
->
->>>>>>>
->
->>>>>>> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
->
->>>>>>>       config=0x55d6ad9e3f80 "RT") at
->
->>>>>>> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
->>>>>>> 146       if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
->
->>>>>>>
->
->>>>>>> (backtrace doesn't go further)
->
->>>>> The core was incomplete, but running under gdb directly shows that it
->
->>>>> is just a bog-standard config space access (first for that device).
->
->>>>>
->
->>>>> The cause of the crash is that nc->peer is not set... no idea how that
->
->>>>> can happen, not that familiar with that part of QEMU. (Should the code
->
->>>>> check, or is that really something that should not happen?)
->
->>>>>
->
->>>>> What I don't understand is why it is set correctly for the first,
->
->>>>> autogenerated virtio-net-ccw device, but not for the second one, and
->
->>>>> why virtio-net-pci doesn't show these problems. The only difference
->
->>>>> between -ccw and -pci that comes to my mind here is that config space
->
->>>>> accesses for ccw are done via an asynchronous operation, so timing
->
->>>>> might be different.
->
->>>> Hopefully Jason has an idea. Could you post a full command line
->
->>>> please? Do you need a working guest to trigger this? Does this trigger
->
->>>> on an x86 host?
->
->>> Yes, it does trigger with tcg-on-x86 as well. I've been using
->
->>>
->
->>> s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
->
->>> qemu,zpci=on
->
->>> -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
->
->>> -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
->
->>> -device
->
->>> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
->
->>> -device virtio-net-ccw
->
->>>
->
->>> It seems it needs the guest actually doing something with the nics; I
->
->>> cannot reproduce the crash if I use the old advent calendar moon buggy
->
->>> image and just add a virtio-net-ccw device.
->
->>>
->
->>> (I don't think it's a problem with my local build, as I see the problem
->
->>> both on my laptop and on an LPAR.)
->
->>
->
->> It looks to me we forget the check the existence of peer.
->
->>
->
->> Please try the attached patch to see if it works.
->
-> Thanks, that patch gets my guest up and running again. So, FWIW,
->
->
->
-> Tested-by: Cornelia Huck <cohuck@redhat.com>
->
->
->
-> Any idea why this did not hit with virtio-net-pci (or the autogenerated
->
-> virtio-net-ccw device)?
->
->
->
-It can be hit with virtio-net-pci as well (just start without peer).
-Hm, I had not been able to reproduce the crash with a 'naked' -device
-virtio-net-pci. But checking seems to be the right idea anyway.
-
->
->
-For autogenerated virtio-net-cww, I think the reason is that it has
->
-already had a peer set.
-Ok, that might well be.
-
-On 2020/7/27 下午4:41, Cornelia Huck wrote:
-On Mon, 27 Jul 2020 15:38:12 +0800
-Jason Wang <jasowang@redhat.com> wrote:
-On 2020/7/27 下午2:43, Cornelia Huck wrote:
-On Sat, 25 Jul 2020 08:40:07 +0800
-Jason Wang <jasowang@redhat.com> wrote:
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin"<mst@redhat.com>  wrote:
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
-       config=0x55d6ad9e3f80 "RT") at 
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-It looks to me we forget the check the existence of peer.
-
-Please try the attached patch to see if it works.
-Thanks, that patch gets my guest up and running again. So, FWIW,
-
-Tested-by: Cornelia Huck <cohuck@redhat.com>
-
-Any idea why this did not hit with virtio-net-pci (or the autogenerated
-virtio-net-ccw device)?
-It can be hit with virtio-net-pci as well (just start without peer).
-Hm, I had not been able to reproduce the crash with a 'naked' -device
-virtio-net-pci. But checking seems to be the right idea anyway.
-Sorry for being unclear, I meant for networking part, you just need
-start without peer, and you need a real guest (any Linux) that is trying
-to access the config space of virtio-net.
-Thanks
-For autogenerated virtio-net-cww, I think the reason is that it has
-already had a peer set.
-Ok, that might well be.
-
-On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
->
->
-On 2020/7/27 下午4:41, Cornelia Huck wrote:
->
-> On Mon, 27 Jul 2020 15:38:12 +0800
->
-> Jason Wang <jasowang@redhat.com> wrote:
->
->
->
-> > On 2020/7/27 下午2:43, Cornelia Huck wrote:
->
-> > > On Sat, 25 Jul 2020 08:40:07 +0800
->
-> > > Jason Wang <jasowang@redhat.com> wrote:
->
-> > > > On 2020/7/24 下午11:34, Cornelia Huck wrote:
->
-> > > > > On Fri, 24 Jul 2020 11:17:57 -0400
->
-> > > > > "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
-> > > > > > On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
-> > > > > > > On Fri, 24 Jul 2020 09:30:58 -0400
->
-> > > > > > > "Michael S. Tsirkin"<mst@redhat.com>  wrote:
->
-> > > > > > > > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
->
-> > > > > > > > > When I start qemu with a second virtio-net-ccw device (i.e.
->
-> > > > > > > > > adding
->
-> > > > > > > > > -device virtio-net-ccw in addition to the autogenerated
->
-> > > > > > > > > device), I get
->
-> > > > > > > > > a segfault. gdb points to
->
-> > > > > > > > >
->
-> > > > > > > > > #0  0x000055d6ab52681d in virtio_net_get_config
->
-> > > > > > > > > (vdev=<optimized out>,
->
-> > > > > > > > >        config=0x55d6ad9e3f80 "RT") at
->
-> > > > > > > > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-> > > > > > > > > 146     if (nc->peer->info->type ==
->
-> > > > > > > > > NET_CLIENT_DRIVER_VHOST_VDPA) {
->
-> > > > > > > > >
->
-> > > > > > > > > (backtrace doesn't go further)
->
-> > > > > > > The core was incomplete, but running under gdb directly shows
->
-> > > > > > > that it
->
-> > > > > > > is just a bog-standard config space access (first for that
->
-> > > > > > > device).
->
-> > > > > > >
->
-> > > > > > > The cause of the crash is that nc->peer is not set... no idea
->
-> > > > > > > how that
->
-> > > > > > > can happen, not that familiar with that part of QEMU. (Should
->
-> > > > > > > the code
->
-> > > > > > > check, or is that really something that should not happen?)
->
-> > > > > > >
->
-> > > > > > > What I don't understand is why it is set correctly for the
->
-> > > > > > > first,
->
-> > > > > > > autogenerated virtio-net-ccw device, but not for the second
->
-> > > > > > > one, and
->
-> > > > > > > why virtio-net-pci doesn't show these problems. The only
->
-> > > > > > > difference
->
-> > > > > > > between -ccw and -pci that comes to my mind here is that config
->
-> > > > > > > space
->
-> > > > > > > accesses for ccw are done via an asynchronous operation, so
->
-> > > > > > > timing
->
-> > > > > > > might be different.
->
-> > > > > > Hopefully Jason has an idea. Could you post a full command line
->
-> > > > > > please? Do you need a working guest to trigger this? Does this
->
-> > > > > > trigger
->
-> > > > > > on an x86 host?
->
-> > > > > Yes, it does trigger with tcg-on-x86 as well. I've been using
->
-> > > > >
->
-> > > > > s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
->
-> > > > > qemu,zpci=on
->
-> > > > > -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
->
-> > > > > -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
->
-> > > > > -device
->
-> > > > > scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
->
-> > > > > -device virtio-net-ccw
->
-> > > > >
->
-> > > > > It seems it needs the guest actually doing something with the nics;
->
-> > > > > I
->
-> > > > > cannot reproduce the crash if I use the old advent calendar moon
->
-> > > > > buggy
->
-> > > > > image and just add a virtio-net-ccw device.
->
-> > > > >
->
-> > > > > (I don't think it's a problem with my local build, as I see the
->
-> > > > > problem
->
-> > > > > both on my laptop and on an LPAR.)
->
-> > > > It looks to me we forget the check the existence of peer.
->
-> > > >
->
-> > > > Please try the attached patch to see if it works.
->
-> > > Thanks, that patch gets my guest up and running again. So, FWIW,
->
-> > >
->
-> > > Tested-by: Cornelia Huck <cohuck@redhat.com>
->
-> > >
->
-> > > Any idea why this did not hit with virtio-net-pci (or the autogenerated
->
-> > > virtio-net-ccw device)?
->
-> >
->
-> > It can be hit with virtio-net-pci as well (just start without peer).
->
-> Hm, I had not been able to reproduce the crash with a 'naked' -device
->
-> virtio-net-pci. But checking seems to be the right idea anyway.
->
->
->
-Sorry for being unclear, I meant for networking part, you just need start
->
-without peer, and you need a real guest (any Linux) that is trying to access
->
-the config space of virtio-net.
->
->
-Thanks
-A pxe guest will do it, but that doesn't support ccw, right?
-
-I'm still unclear why this triggers with ccw but not pci -
-any idea?
-
->
->
->
->
-> > For autogenerated virtio-net-cww, I think the reason is that it has
->
-> > already had a peer set.
->
-> Ok, that might well be.
->
->
->
->
-
-On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
-On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
-On 2020/7/27 下午4:41, Cornelia Huck wrote:
-On Mon, 27 Jul 2020 15:38:12 +0800
-Jason Wang<jasowang@redhat.com>  wrote:
-On 2020/7/27 下午2:43, Cornelia Huck wrote:
-On Sat, 25 Jul 2020 08:40:07 +0800
-Jason Wang<jasowang@redhat.com>  wrote:
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin"<mst@redhat.com>   wrote:
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin"<mst@redhat.com>   wrote:
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
-        config=0x55d6ad9e3f80 "RT") at 
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-It looks to me we forget the check the existence of peer.
-
-Please try the attached patch to see if it works.
-Thanks, that patch gets my guest up and running again. So, FWIW,
-
-Tested-by: Cornelia Huck<cohuck@redhat.com>
-
-Any idea why this did not hit with virtio-net-pci (or the autogenerated
-virtio-net-ccw device)?
-It can be hit with virtio-net-pci as well (just start without peer).
-Hm, I had not been able to reproduce the crash with a 'naked' -device
-virtio-net-pci. But checking seems to be the right idea anyway.
-Sorry for being unclear, I meant for networking part, you just need start
-without peer, and you need a real guest (any Linux) that is trying to access
-the config space of virtio-net.
-
-Thanks
-A pxe guest will do it, but that doesn't support ccw, right?
-Yes, it depends on the cli actually.
-I'm still unclear why this triggers with ccw but not pci -
-any idea?
-I don't test pxe but I can reproduce this with pci (just start a linux
-guest without a peer).
-Thanks
-
-On Mon, Jul 27, 2020 at 08:44:09PM +0800, Jason Wang wrote:
->
->
-On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
->
-> On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
->
-> > On 2020/7/27 下午4:41, Cornelia Huck wrote:
->
-> > > On Mon, 27 Jul 2020 15:38:12 +0800
->
-> > > Jason Wang<jasowang@redhat.com>  wrote:
->
-> > >
->
-> > > > On 2020/7/27 下午2:43, Cornelia Huck wrote:
->
-> > > > > On Sat, 25 Jul 2020 08:40:07 +0800
->
-> > > > > Jason Wang<jasowang@redhat.com>  wrote:
->
-> > > > > > On 2020/7/24 下午11:34, Cornelia Huck wrote:
->
-> > > > > > > On Fri, 24 Jul 2020 11:17:57 -0400
->
-> > > > > > > "Michael S. Tsirkin"<mst@redhat.com>   wrote:
->
-> > > > > > > > On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
->
-> > > > > > > > > On Fri, 24 Jul 2020 09:30:58 -0400
->
-> > > > > > > > > "Michael S. Tsirkin"<mst@redhat.com>   wrote:
->
-> > > > > > > > > > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck
->
-> > > > > > > > > > wrote:
->
-> > > > > > > > > > > When I start qemu with a second virtio-net-ccw device
->
-> > > > > > > > > > > (i.e. adding
->
-> > > > > > > > > > > -device virtio-net-ccw in addition to the autogenerated
->
-> > > > > > > > > > > device), I get
->
-> > > > > > > > > > > a segfault. gdb points to
->
-> > > > > > > > > > >
->
-> > > > > > > > > > > #0  0x000055d6ab52681d in virtio_net_get_config
->
-> > > > > > > > > > > (vdev=<optimized out>,
->
-> > > > > > > > > > >         config=0x55d6ad9e3f80 "RT") at
->
-> > > > > > > > > > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
->
-> > > > > > > > > > > 146         if (nc->peer->info->type ==
->
-> > > > > > > > > > > NET_CLIENT_DRIVER_VHOST_VDPA) {
->
-> > > > > > > > > > >
->
-> > > > > > > > > > > (backtrace doesn't go further)
->
-> > > > > > > > > The core was incomplete, but running under gdb directly
->
-> > > > > > > > > shows that it
->
-> > > > > > > > > is just a bog-standard config space access (first for that
->
-> > > > > > > > > device).
->
-> > > > > > > > >
->
-> > > > > > > > > The cause of the crash is that nc->peer is not set... no
->
-> > > > > > > > > idea how that
->
-> > > > > > > > > can happen, not that familiar with that part of QEMU.
->
-> > > > > > > > > (Should the code
->
-> > > > > > > > > check, or is that really something that should not happen?)
->
-> > > > > > > > >
->
-> > > > > > > > > What I don't understand is why it is set correctly for the
->
-> > > > > > > > > first,
->
-> > > > > > > > > autogenerated virtio-net-ccw device, but not for the second
->
-> > > > > > > > > one, and
->
-> > > > > > > > > why virtio-net-pci doesn't show these problems. The only
->
-> > > > > > > > > difference
->
-> > > > > > > > > between -ccw and -pci that comes to my mind here is that
->
-> > > > > > > > > config space
->
-> > > > > > > > > accesses for ccw are done via an asynchronous operation, so
->
-> > > > > > > > > timing
->
-> > > > > > > > > might be different.
->
-> > > > > > > > Hopefully Jason has an idea. Could you post a full command
->
-> > > > > > > > line
->
-> > > > > > > > please? Do you need a working guest to trigger this? Does
->
-> > > > > > > > this trigger
->
-> > > > > > > > on an x86 host?
->
-> > > > > > > Yes, it does trigger with tcg-on-x86 as well. I've been using
->
-> > > > > > >
->
-> > > > > > > s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg
->
-> > > > > > > -cpu qemu,zpci=on
->
-> > > > > > > -m 1024 -nographic -device
->
-> > > > > > > virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
->
-> > > > > > > -drive
->
-> > > > > > > file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
->
-> > > > > > > -device
->
-> > > > > > > scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
->
-> > > > > > > -device virtio-net-ccw
->
-> > > > > > >
->
-> > > > > > > It seems it needs the guest actually doing something with the
->
-> > > > > > > nics; I
->
-> > > > > > > cannot reproduce the crash if I use the old advent calendar
->
-> > > > > > > moon buggy
->
-> > > > > > > image and just add a virtio-net-ccw device.
->
-> > > > > > >
->
-> > > > > > > (I don't think it's a problem with my local build, as I see the
->
-> > > > > > > problem
->
-> > > > > > > both on my laptop and on an LPAR.)
->
-> > > > > > It looks to me we forget the check the existence of peer.
->
-> > > > > >
->
-> > > > > > Please try the attached patch to see if it works.
->
-> > > > > Thanks, that patch gets my guest up and running again. So, FWIW,
->
-> > > > >
->
-> > > > > Tested-by: Cornelia Huck<cohuck@redhat.com>
->
-> > > > >
->
-> > > > > Any idea why this did not hit with virtio-net-pci (or the
->
-> > > > > autogenerated
->
-> > > > > virtio-net-ccw device)?
->
-> > > > It can be hit with virtio-net-pci as well (just start without peer).
->
-> > > Hm, I had not been able to reproduce the crash with a 'naked' -device
->
-> > > virtio-net-pci. But checking seems to be the right idea anyway.
->
-> > Sorry for being unclear, I meant for networking part, you just need start
->
-> > without peer, and you need a real guest (any Linux) that is trying to
->
-> > access
->
-> > the config space of virtio-net.
->
-> >
->
-> > Thanks
->
-> A pxe guest will do it, but that doesn't support ccw, right?
->
->
->
-Yes, it depends on the cli actually.
->
->
->
->
->
-> I'm still unclear why this triggers with ccw but not pci -
->
-> any idea?
->
->
->
-I don't test pxe but I can reproduce this with pci (just start a linux guest
->
-without a peer).
->
->
-Thanks
->
-Might be a good addition to a unit test. Not sure what would the
-test do exactly: just make sure guest runs? Looks like a lot of work
-for an empty test ... maybe we can poke at the guest config with
-qtest commands at least.
-
--- 
-MST
-
-On 2020/7/27 下午9:16, Michael S. Tsirkin wrote:
-On Mon, Jul 27, 2020 at 08:44:09PM +0800, Jason Wang wrote:
-On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
-On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
-On 2020/7/27 下午4:41, Cornelia Huck wrote:
-On Mon, 27 Jul 2020 15:38:12 +0800
-Jason Wang<jasowang@redhat.com>  wrote:
-On 2020/7/27 下午2:43, Cornelia Huck wrote:
-On Sat, 25 Jul 2020 08:40:07 +0800
-Jason Wang<jasowang@redhat.com>  wrote:
-On 2020/7/24 下午11:34, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 11:17:57 -0400
-"Michael S. Tsirkin"<mst@redhat.com>   wrote:
-On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
-On Fri, 24 Jul 2020 09:30:58 -0400
-"Michael S. Tsirkin"<mst@redhat.com>   wrote:
-On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
-When I start qemu with a second virtio-net-ccw device (i.e. adding
--device virtio-net-ccw in addition to the autogenerated device), I get
-a segfault. gdb points to
-
-#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
-         config=0x55d6ad9e3f80 "RT") at 
-/home/cohuck/git/qemu/hw/net/virtio-net.c:146
-146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
-
-(backtrace doesn't go further)
-The core was incomplete, but running under gdb directly shows that it
-is just a bog-standard config space access (first for that device).
-
-The cause of the crash is that nc->peer is not set... no idea how that
-can happen, not that familiar with that part of QEMU. (Should the code
-check, or is that really something that should not happen?)
-
-What I don't understand is why it is set correctly for the first,
-autogenerated virtio-net-ccw device, but not for the second one, and
-why virtio-net-pci doesn't show these problems. The only difference
-between -ccw and -pci that comes to my mind here is that config space
-accesses for ccw are done via an asynchronous operation, so timing
-might be different.
-Hopefully Jason has an idea. Could you post a full command line
-please? Do you need a working guest to trigger this? Does this trigger
-on an x86 host?
-Yes, it does trigger with tcg-on-x86 as well. I've been using
-
-s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
--m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
--drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
--device 
-scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
--device virtio-net-ccw
-
-It seems it needs the guest actually doing something with the nics; I
-cannot reproduce the crash if I use the old advent calendar moon buggy
-image and just add a virtio-net-ccw device.
-
-(I don't think it's a problem with my local build, as I see the problem
-both on my laptop and on an LPAR.)
-It looks to me we forget the check the existence of peer.
-
-Please try the attached patch to see if it works.
-Thanks, that patch gets my guest up and running again. So, FWIW,
-
-Tested-by: Cornelia Huck<cohuck@redhat.com>
-
-Any idea why this did not hit with virtio-net-pci (or the autogenerated
-virtio-net-ccw device)?
-It can be hit with virtio-net-pci as well (just start without peer).
-Hm, I had not been able to reproduce the crash with a 'naked' -device
-virtio-net-pci. But checking seems to be the right idea anyway.
-Sorry for being unclear, I meant for networking part, you just need start
-without peer, and you need a real guest (any Linux) that is trying to access
-the config space of virtio-net.
-
-Thanks
-A pxe guest will do it, but that doesn't support ccw, right?
-Yes, it depends on the cli actually.
-I'm still unclear why this triggers with ccw but not pci -
-any idea?
-I don't test pxe but I can reproduce this with pci (just start a linux guest
-without a peer).
-
-Thanks
-Might be a good addition to a unit test. Not sure what would the
-test do exactly: just make sure guest runs? Looks like a lot of work
-for an empty test ... maybe we can poke at the guest config with
-qtest commands at least.
-That should work or we can simply extend the exist virtio-net qtest to
-do that.
-Thanks
-
diff --git a/results/classifier/005/network/05479587 b/results/classifier/005/network/05479587
deleted file mode 100644
index 742a5a97..00000000
--- a/results/classifier/005/network/05479587
+++ /dev/null
@@ -1,91 +0,0 @@
-network: 0.963
-semantic: 0.866
-device: 0.811
-mistranslation: 0.759
-socket: 0.716
-instruction: 0.597
-graphic: 0.576
-boot: 0.474
-vnc: 0.464
-KVM: 0.374
-assembly: 0.326
-other: 0.200
-
-[Qemu-devel]  [BUG] network qga : windows os lost ip address of the network card  in some cases
-
-We think this problem coulde be solevd in qga modules。can anybody give some 
-advice ?
-
-
-[BUG] network : windows os lost ip address of the network card  in some cases
-
-we  found this problem for a long time 。For example, if we has three network 
-card in virtual xml file ，such as "network connection 1" / "network connection 
-2"/"network connection 3" 。
-
-Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
-delete the first card ，reboot the windows virtual os, then this problem 
-happened !
-
-
-
-
-we found that the sencond network card will  replace the first one , then the 
-ip address of "network connection 2 " become 192.168.1.1 。
-
-
-Our third party users began to complain about this bug 。All the business of the 
-second ip  lost !!! 
-
-I mean both of windows and linux has this bug ,  we solve this bug in linux  
-throught bonding netcrad pci and mac address 。
-
-There is no good solution on windows os . thera are ?  we implemented a plan to 
-resumption of IP by QGA.  Is there a better way ?
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人：尹作为10144574
-收件人： address@hidden
-日 期 ：2017年04月14日 16:46
-主 题 ：[BUG] network : windows os lost ip address of the network card  in some 
-cases
-
-
-
-
-
-
-we  found this problem for a long time 。For example, if we has three network 
-card in virtual xml file ，such as "network connection 1" / "network connection 
-2"/"network connection 3" 。
-
-Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
-delete the first card ，reboot the windows virtual os, then this problem 
-happened !
-
-
-
-
-we found that the sencond network card will  replace the first one , then the 
-ip address of "network connection 2 " become 192.168.1.1 。
-
-
-Our third party users began to complain about this bug 。All the business of the 
-second ip  lost !!! 
-
-I mean both of windows and linux has this bug ,  we solve this bug in linux  
-throught bonding netcrad pci and mac address 。
-
-There is no good solution on windows os . thera are ?  we implemented a plan to 
-resumption of IP by QGA.  Is there a better way ?
-
diff --git a/results/classifier/005/network/62179944 b/results/classifier/005/network/62179944
deleted file mode 100644
index 7be6c389..00000000
--- a/results/classifier/005/network/62179944
+++ /dev/null
@@ -1,39 +0,0 @@
-network: 0.966
-graphic: 0.907
-device: 0.818
-instruction: 0.693
-socket: 0.608
-boot: 0.567
-mistranslation: 0.533
-other: 0.519
-vnc: 0.498
-semantic: 0.454
-assembly: 0.275
-KVM: 0.153
-
-[Qemu-devel] [BUG] network : windows os lost ip address of the network card  in some cases
-
-we  found this problem for a long time 。For example, if we has three network 
-card in virtual xml file ，such as "network connection 1" / "network connection 
-2"/"network connection 3" 。
-
-Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
-delete the first card ，reboot the windows virtual os, then this problem 
-happened !
-
-
-
-
-we found that the sencond network card will  replace the first one , then the 
-ip address of "network connection 2 " become 192.168.1.1 。
-
-
-Our third party users began to complain about this bug 。All the business of the 
-second ip  lost !!! 
-
-I mean both of windows and linux has this bug ,  we solve this bug in linux  
-throught bonding netcrad pci and mac address 。
-
-There is no good solution on windows os . thera are ?  we implemented a plan to 
-resumption of IP by QGA.  Is there a better way ?
-
diff --git a/results/classifier/005/other/02364653 b/results/classifier/005/other/02364653
deleted file mode 100644
index 5b8062a6..00000000
--- a/results/classifier/005/other/02364653
+++ /dev/null
@@ -1,371 +0,0 @@
-other: 0.956
-graphic: 0.948
-semantic: 0.942
-assembly: 0.936
-device: 0.928
-instruction: 0.927
-boot: 0.925
-socket: 0.924
-vnc: 0.922
-mistranslation: 0.912
-KVM: 0.911
-network: 0.881
-
-[Qemu-devel] [BUG] Inappropriate size of target_sigset_t
-
-Hello, Peter, Laurent,
-
-While working on another problem yesterday, I think I discovered a 
-long-standing bug in QEMU Linux user mode: our target_sigset_t structure is 
-eight times smaller as it should be!
-
-In this code segment from syscalls_def.h:
-
-#ifdef TARGET_MIPS
-#define TARGET_NSIG        128
-#else
-#define TARGET_NSIG        64
-#endif
-#define TARGET_NSIG_BPW    TARGET_ABI_BITS
-#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
-
-typedef struct {
-    abi_ulong sig[TARGET_NSIG_WORDS];
-} target_sigset_t;
-
-... TARGET_ABI_BITS should be replaced by eight times smaller constant (in 
-fact, semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is 
-needed is actually "a byte per signal" in target_sigset_t, and we allow "a bit 
-per signal").
-
-All this probably sounds to you like something impossible, since this code is 
-in QEMU "since forever", but I checked everything, and the bug seems real. I 
-wish you can prove me wrong.
-
-I just wanted to let you know about this, given the sensitive timing of current 
-softfreeze, and the fact that I won't be able to do more investigation on this 
-in coming weeks, since I am busy with other tasks, but perhaps you can analyze 
-and do something which you consider appropriate.
-
-Yours,
-Aleksandar
-
-Le 03/07/2019 à 21:46, Aleksandar Markovic a écrit :
->
-Hello, Peter, Laurent,
->
->
-While working on another problem yesterday, I think I discovered a
->
-long-standing bug in QEMU Linux user mode: our target_sigset_t structure is
->
-eight times smaller as it should be!
->
->
-In this code segment from syscalls_def.h:
->
->
-#ifdef TARGET_MIPS
->
-#define TARGET_NSIG      128
->
-#else
->
-#define TARGET_NSIG      64
->
-#endif
->
-#define TARGET_NSIG_BPW          TARGET_ABI_BITS
->
-#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
->
->
-typedef struct {
->
-abi_ulong sig[TARGET_NSIG_WORDS];
->
-} target_sigset_t;
->
->
-... TARGET_ABI_BITS should be replaced by eight times smaller constant (in
->
-fact, semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is
->
-needed is actually "a byte per signal" in target_sigset_t, and we allow "a
->
-bit per signal").
-TARGET_NSIG is divided by TARGET_ABI_BITS which gives you the number of
-abi_ulong words we need in target_sigset_t.
-
->
-All this probably sounds to you like something impossible, since this code is
->
-in QEMU "since forever", but I checked everything, and the bug seems real. I
->
-wish you can prove me wrong.
->
->
-I just wanted to let you know about this, given the sensitive timing of
->
-current softfreeze, and the fact that I won't be able to do more
->
-investigation on this in coming weeks, since I am busy with other tasks, but
->
-perhaps you can analyze and do something which you consider appropriate.
-If I compare with kernel, it looks good:
-
-In Linux:
-
-  arch/mips/include/uapi/asm/signal.h
-
-  #define _NSIG           128
-  #define _NSIG_BPW       (sizeof(unsigned long) * 8)
-  #define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
-
-  typedef struct {
-          unsigned long sig[_NSIG_WORDS];
-  } sigset_t;
-
-_NSIG_BPW is 8 * 8 = 64 on MIPS64 or 4 * 8 = 32 on MIPS
-
-In QEMU:
-
-TARGET_NSIG_BPW is TARGET_ABI_BITS which is  TARGET_LONG_BITS which is
-64 on MIPS64 and 32 on MIPS.
-
-I think there is no problem.
-
-Thanks,
-Laurent
-
-From: Laurent Vivier <address@hidden>
->
-If I compare with kernel, it looks good:
->
-...
->
-I think there is no problem.
-Sure, thanks for such fast response - again, I am glad if you are right. 
-However, for some reason, glibc (and musl too) define sigset_t differently than 
-kernel. Please take a look. I am not sure if this is covered fine in our code.
-
-Yours,
-Aleksandar
-
->
-Thanks,
->
-Laurent
-
-On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
->
->
-From: Laurent Vivier <address@hidden>
->
-> If I compare with kernel, it looks good:
->
-> ...
->
-> I think there is no problem.
->
->
-Sure, thanks for such fast response - again, I am glad if you are right.
->
-However, for some reason, glibc (and musl too) define sigset_t differently
->
-than kernel. Please take a look. I am not sure if this is covered fine in our
->
-code.
-Yeah, the libc definitions of sigset_t don't match the
-kernel ones (this is for obscure historical reasons IIRC).
-We're providing implementations of the target
-syscall interface, so our target_sigset_t should be the
-target kernel's version (and the target libc's version doesn't
-matter to us). On the other hand we will be using the
-host libc version, I think, so a little caution is required
-and it's possible we have some bugs in our code.
-
-thanks
--- PMM
-
->
-From: Peter Maydell <address@hidden>
->
->
-On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
->
->
->
-> From: Laurent Vivier <address@hidden>
->
-> > If I compare with kernel, it looks good:
->
-> > ...
->
-> > I think there is no problem.
->
->
->
-> Sure, thanks for such fast response - again, I am glad if you are right.
->
-> However, for some reason, glibc (and musl too) define sigset_t differently
->
-> than kernel. Please take a look. I am not sure if this is covered fine in
->
-> our code.
->
->
-Yeah, the libc definitions of sigset_t don't match the
->
-kernel ones (this is for obscure historical reasons IIRC).
->
-We're providing implementations of the target
->
-syscall interface, so our target_sigset_t should be the
->
-target kernel's version (and the target libc's version doesn't
->
-matter to us). On the other hand we will be using the
->
-host libc version, I think, so a little caution is required
->
-and it's possible we have some bugs in our code.
-OK, I gather than this is not something that requires our immediate attention 
-(for 4.1), but we can analyze it later on.
-
-Thanks for response!!
-
-Sincerely,
-Aleksandar
-
->
-thanks
->
--- PMM
-
-Le 03/07/2019 à 22:28, Peter Maydell a écrit :
->
-On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
->
->
->
-> From: Laurent Vivier <address@hidden>
->
->> If I compare with kernel, it looks good:
->
->> ...
->
->> I think there is no problem.
->
->
->
-> Sure, thanks for such fast response - again, I am glad if you are right.
->
-> However, for some reason, glibc (and musl too) define sigset_t differently
->
-> than kernel. Please take a look. I am not sure if this is covered fine in
->
-> our code.
->
->
-Yeah, the libc definitions of sigset_t don't match the
->
-kernel ones (this is for obscure historical reasons IIRC).
->
-We're providing implementations of the target
->
-syscall interface, so our target_sigset_t should be the
->
-target kernel's version (and the target libc's version doesn't
->
-matter to us). On the other hand we will be using the
->
-host libc version, I think, so a little caution is required
->
-and it's possible we have some bugs in our code.
-It's why we need host_to_target_sigset_internal() and
-target_to_host_sigset_internal() that translates bits and bytes between
-guest kernel interface and host libc interface.
-
-void host_to_target_sigset_internal(target_sigset_t *d,
-                                    const sigset_t *s)
-{
-    int i;
-    target_sigemptyset(d);
-    for (i = 1; i <= TARGET_NSIG; i++) {
-        if (sigismember(s, i)) {
-            target_sigaddset(d, host_to_target_signal(i));
-        }
-    }
-}
-
-void target_to_host_sigset_internal(sigset_t *d,
-                                    const target_sigset_t *s)
-{
-    int i;
-    sigemptyset(d);
-    for (i = 1; i <= TARGET_NSIG; i++) {
-        if (target_sigismember(s, i)) {
-            sigaddset(d, target_to_host_signal(i));
-        }
-    }
-}
-
-Thanks,
-Laurent
-
-Hi Aleksandar,
-
-On Wed, Jul 3, 2019 at 12:48 PM Aleksandar Markovic
-<address@hidden> wrote:
->
-#define TARGET_NSIG_BPW    TARGET_ABI_BITS
->
-#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
->
->
-typedef struct {
->
-abi_ulong sig[TARGET_NSIG_WORDS];
->
-} target_sigset_t;
->
->
-... TARGET_ABI_BITS should be replaced by eight times smaller constant (in
->
-fact,
->
-semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is needed
->
-is actually "a byte per signal" in target_sigset_t, and we allow "a bit per
->
-signal").
-Why do we need a byte per target signal, if the functions in linux-user/signal.c
-operate with bits?
-
--- 
-Thanks.
--- Max
-
->
-Why do we need a byte per target signal, if the functions in
->
-linux-user/signal.c
->
-operate with bits?
-Max,
-
-I did not base my findings on code analysis, but on dumping size/offsets of 
-elements of some structures, as they are emulated in QEMU, and in real systems. 
-So, I can't really answer your question.
-
-Yours,
-Aleksandar
-
->
---
->
-Thanks.
->
--- Max
-
diff --git a/results/classifier/005/other/02572177 b/results/classifier/005/other/02572177
deleted file mode 100644
index 10871dae..00000000
--- a/results/classifier/005/other/02572177
+++ /dev/null
@@ -1,429 +0,0 @@
-other: 0.869
-instruction: 0.794
-device: 0.791
-semantic: 0.770
-assembly: 0.756
-graphic: 0.747
-socket: 0.742
-network: 0.708
-vnc: 0.706
-mistranslation: 0.693
-KVM: 0.669
-boot: 0.658
-
-[Qemu-devel] 答复: Re:  [BUG]COLO failover hang
-
-hi.
-
-
-I test the git qemu master have the same problem.
-
-
-(gdb) bt
-
-
-#0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880, niov=1, 
-fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-
-
-#1  0x00007f658e4aa0c2 in qio_channel_read (address@hidden, address@hidden "", 
-address@hidden, address@hidden) at io/channel.c:114
-
-
-#2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞, 
-buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at 
-migration/qemu-file-channel.c:78
-
-
-#3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at 
-migration/qemu-file.c:295
-
-
-#4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden, address@hidden) at 
-migration/qemu-file.c:555
-
-
-#5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at 
-migration/qemu-file.c:568
-
-
-#6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at 
-migration/qemu-file.c:648
-
-
-#7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800, 
-address@hidden) at migration/colo.c:244
-
-
-#8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized out＞, 
-address@hidden, address@hidden)
-
-
-    at migration/colo.c:264
-
-
-#9  0x00007f658e3e740e in colo_process_incoming_thread (opaque=0x7f658eb30360 
-＜mis_current.31286＞) at migration/colo.c:577
-
-
-#10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-
-
-#11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-
-
-(gdb) p ioc-＞name
-
-
-$2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-
-
-(gdb) p ioc-＞features          Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-
-
-$3 = 0
-
-
-
-
-
-(gdb) bt
-
-
-#0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90, condition=G_IO_IN, 
-opaque=0x7fdcceeafa90) at migration/socket.c:137
-
-
-#1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at 
-gmain.c:3054
-
-
-#2  g_main_context_dispatch (context=＜optimized out＞, address@hidden) at 
-gmain.c:3630
-
-
-#3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-
-
-#4  os_host_main_loop_wait (timeout=＜optimized out＞) at util/main-loop.c:258
-
-
-#5  main_loop_wait (address@hidden) at util/main-loop.c:506
-
-
-#6  0x00007fdccb526187 in main_loop () at vl.c:1898
-
-
-#7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized out＞) at 
-vl.c:4709
-
-
-(gdb) p ioc-＞features
-
-
-$1 = 6
-
-
-(gdb) p ioc-＞name
-
-
-$2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-
-
-
-
-
-May be socket_accept_incoming_migration should call 
-qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-
-
-
-
-
-thank you.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月16日 14:46
-主 题 ：Re: [Qemu-devel] COLO failover hang
-
-
-
-
-
-
-
-On 03/15/2017 05:06 PM, wangguang wrote:
-＞   am testing QEMU COLO feature described here [QEMU
-＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞
-＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ hang at recvmsg in qio_channel_socket_readv.
-＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞
-＞ I found that the colo in qemu is not complete yet.
-＞ Do the colo have any plan for development?
-
-Yes, We are developing. You can see some of patch we pushing.
-
-＞ Has anyone ever run it successfully? Any help is appreciated!
-
-In our internal version can run it successfully,
-The failover detail you can ask Zhanghailiang for help.
-Next time if you have some question about COLO,
-please cc me and zhanghailiang address@hidden
-
-
-Thanks
-Zhang Chen
-
-
-＞
-＞
-＞
-＞ centos7.2+qemu2.7.50
-＞ (gdb) bt
-＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ io/channel-socket.c:497
-＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ address@hidden "", address@hidden,
-＞ address@hidden) at io/channel.c:97
-＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ migration/qemu-file-channel.c:78
-＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ migration/qemu-file.c:257
-＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ address@hidden) at migration/qemu-file.c:510
-＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ migration/qemu-file.c:523
-＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ migration/qemu-file.c:603
-＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ address@hidden) at migration/colo.c:215
-＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ migration/colo.c:546
-＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ migration/colo.c:649
-＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞
-＞
-＞
-＞
-＞
-＞ --
-＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ Sent from the Developer mailing list archive at Nabble.com.
-＞
-＞
-＞
-＞
-
--- 
-Thanks
-Zhang Chen
-
-Hi,Wang.
-
-You can test this branch:
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-and please follow wiki ensure your own configuration correctly.
-http://wiki.qemu-project.org/Features/COLO
-Thanks
-
-Zhang Chen
-
-
-On 03/21/2017 03:27 PM, address@hidden wrote:
-hi.
-
-I test the git qemu master have the same problem.
-
-(gdb) bt
-#0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-#1  0x00007f658e4aa0c2 in qio_channel_read
-(address@hidden, address@hidden "",
-address@hidden, address@hidden) at io/channel.c:114
-#2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-migration/qemu-file-channel.c:78
-#3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-migration/qemu-file.c:295
-#4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-address@hidden) at migration/qemu-file.c:555
-#5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-migration/qemu-file.c:568
-#6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-migration/qemu-file.c:648
-#7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-address@hidden) at migration/colo.c:244
-#8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-out＞, address@hidden,
-address@hidden)
-at migration/colo.c:264
-#9  0x00007f658e3e740e in colo_process_incoming_thread
-(opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-#10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-
-#11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-
-(gdb) p ioc-＞name
-
-$2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-
-(gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-
-$3 = 0
-
-
-(gdb) bt
-#0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-#1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-gmain.c:3054
-#2  g_main_context_dispatch (context=＜optimized out＞,
-address@hidden) at gmain.c:3630
-#3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-#4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-util/main-loop.c:258
-#5  main_loop_wait (address@hidden) at
-util/main-loop.c:506
-#6  0x00007fdccb526187 in main_loop () at vl.c:1898
-#7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-out＞) at vl.c:4709
-(gdb) p ioc-＞features
-
-$1 = 6
-
-(gdb) p ioc-＞name
-
-$2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-May be socket_accept_incoming_migration should
-call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-thank you.
-
-
-
-
-
-原始邮件
-address@hidden;
-*收件人：*王广10165992;address@hidden;
-address@hidden;address@hidden;
-*日 期 ：*2017年03月16日 14:46
-*主 题 ：**Re: [Qemu-devel] COLO failover hang*
-
-
-
-
-On 03/15/2017 05:06 PM, wangguang wrote:
-＞   am testing QEMU COLO feature described here [QEMU
-＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞
-＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ hang at recvmsg in qio_channel_socket_readv.
-＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞
-＞ I found that the colo in qemu is not complete yet.
-＞ Do the colo have any plan for development?
-
-Yes, We are developing. You can see some of patch we pushing.
-
-＞ Has anyone ever run it successfully? Any help is appreciated!
-
-In our internal version can run it successfully,
-The failover detail you can ask Zhanghailiang for help.
-Next time if you have some question about COLO,
-please cc me and zhanghailiang address@hidden
-
-
-Thanks
-Zhang Chen
-
-
-＞
-＞
-＞
-＞ centos7.2+qemu2.7.50
-＞ (gdb) bt
-＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ io/channel-socket.c:497
-＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ address@hidden "", address@hidden,
-＞ address@hidden) at io/channel.c:97
-＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ migration/qemu-file-channel.c:78
-＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ migration/qemu-file.c:257
-＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ address@hidden) at migration/qemu-file.c:510
-＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ migration/qemu-file.c:523
-＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ migration/qemu-file.c:603
-＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ address@hidden) at migration/colo.c:215
-＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ migration/colo.c:546
-＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ migration/colo.c:649
-＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞
-＞
-＞
-＞
-＞
-＞ --
-＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ Sent from the Developer mailing list archive at Nabble.com.
-＞
-＞
-＞
-＞
-
---
-Thanks
-Zhang Chen
---
-Thanks
-Zhang Chen
-
diff --git a/results/classifier/005/other/12869209 b/results/classifier/005/other/12869209
deleted file mode 100644
index 6e8310c0..00000000
--- a/results/classifier/005/other/12869209
+++ /dev/null
@@ -1,96 +0,0 @@
-other: 0.964
-device: 0.951
-assembly: 0.937
-mistranslation: 0.935
-instruction: 0.919
-socket: 0.906
-semantic: 0.891
-vnc: 0.885
-graphic: 0.879
-network: 0.858
-KVM: 0.857
-boot: 0.837
-
-[BUG FIX][PATCH v3 0/3] vhost-user-blk: fix bug on device disconnection during initialization
-
-This is a series fixing a bug in
-          host-user-blk.
-Is there any chance for it to be considered for the next rc?
-Thanks!
-Denis
-On 29.03.2021 16:44, Denis Plotnikov
-      wrote:
-ping!
-On 25.03.2021 18:12, Denis Plotnikov
-        wrote:
-v3:
-  * 0003: a new patch added fixing the problem on vm shutdown
-    I stumbled on this bug after v2 sending.
-  * 0001: gramma fixing (Raphael)
-  * 0002: commit message fixing (Raphael)
-
-v2:
-  * split the initial patch into two (Raphael)
-  * rename init to realized (Raphael)
-  * remove unrelated comment (Raphael)
-
-When the vhost-user-blk device lose the connection to the daemon during
-the initialization phase it kills qemu because of the assert in the code.
-The series fixes the bug.
-
-0001 is preparation for the fix
-0002 fixes the bug, patch description has the full motivation for the series
-0003 (added in v3) fix bug on vm shutdown
-
-Denis Plotnikov (3):
-  vhost-user-blk: use different event handlers on initialization
-  vhost-user-blk: perform immediate cleanup if disconnect on
-    initialization
-  vhost-user-blk: add immediate cleanup on shutdown
-
- hw/block/vhost-user-blk.c | 79 ++++++++++++++++++++++++---------------
- 1 file changed, 48 insertions(+), 31 deletions(-)
-
-On 01.04.2021 14:21, Denis Plotnikov wrote:
-This is a series fixing a bug in host-user-blk.
-More specifically, it's not just a bug but crasher.
-
-Valentine
-Is there any chance for it to be considered for the next rc?
-
-Thanks!
-
-Denis
-
-On 29.03.2021 16:44, Denis Plotnikov wrote:
-ping!
-
-On 25.03.2021 18:12, Denis Plotnikov wrote:
-v3:
-   * 0003: a new patch added fixing the problem on vm shutdown
-     I stumbled on this bug after v2 sending.
-   * 0001: gramma fixing (Raphael)
-   * 0002: commit message fixing (Raphael)
-
-v2:
-   * split the initial patch into two (Raphael)
-   * rename init to realized (Raphael)
-   * remove unrelated comment (Raphael)
-
-When the vhost-user-blk device lose the connection to the daemon during
-the initialization phase it kills qemu because of the assert in the code.
-The series fixes the bug.
-
-0001 is preparation for the fix
-0002 fixes the bug, patch description has the full motivation for the series
-0003 (added in v3) fix bug on vm shutdown
-
-Denis Plotnikov (3):
-   vhost-user-blk: use different event handlers on initialization
-   vhost-user-blk: perform immediate cleanup if disconnect on
-     initialization
-   vhost-user-blk: add immediate cleanup on shutdown
-
-  hw/block/vhost-user-blk.c | 79 ++++++++++++++++++++++++---------------
-  1 file changed, 48 insertions(+), 31 deletions(-)
-
diff --git a/results/classifier/005/other/13442371 b/results/classifier/005/other/13442371
deleted file mode 100644
index 189f6cbb..00000000
--- a/results/classifier/005/other/13442371
+++ /dev/null
@@ -1,377 +0,0 @@
-other: 0.886
-device: 0.883
-assembly: 0.877
-KVM: 0.872
-instruction: 0.861
-mistranslation: 0.859
-vnc: 0.858
-graphic: 0.850
-semantic: 0.850
-socket: 0.831
-boot: 0.815
-network: 0.811
-
-[Qemu-devel] [BUG] nanoMIPS support problem related to extract2 support for i386 TCG target
-
-Hello, Richard, Peter, and others.
-
-As a part of activities before 4.1 release, I tested nanoMIPS support
-in QEMU (which was officially fully integrated in 4.0, is currently
-limited to system mode only, and was tested in a similar fashion right
-prior to 4.0).
-
-This support appears to be broken now. Following command line works in
-4.0, but results in kernel panic for the current tip of the tree:
-
-~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
--cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
-1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
-"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
-
-(kernel and rootfs image files used in this commend line can be
-downloaded from the locations mentioned in our user guide)
-
-The quick bisect points to the commit:
-
-commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
-Author: Richard Henderson <address@hidden>
-Date:   Mon Feb 25 11:42:35 2019 -0800
-
-    tcg/i386: Support INDEX_op_extract2_{i32,i64}
-
-    Signed-off-by: Richard Henderson <address@hidden>
-
-Please advise on further actions.
-
-Yours,
-Aleksandar
-
-On Fri, Jul 12, 2019 at 8:09 PM Aleksandar Markovic
-<address@hidden> wrote:
->
->
-Hello, Richard, Peter, and others.
->
->
-As a part of activities before 4.1 release, I tested nanoMIPS support
->
-in QEMU (which was officially fully integrated in 4.0, is currently
->
-limited to system mode only, and was tested in a similar fashion right
->
-prior to 4.0).
->
->
-This support appears to be broken now. Following command line works in
->
-4.0, but results in kernel panic for the current tip of the tree:
->
->
-~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
->
--cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
->
-1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
->
-"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
->
->
-(kernel and rootfs image files used in this commend line can be
->
-downloaded from the locations mentioned in our user guide)
->
->
-The quick bisect points to the commit:
->
->
-commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
->
-Author: Richard Henderson <address@hidden>
->
-Date:   Mon Feb 25 11:42:35 2019 -0800
->
->
-tcg/i386: Support INDEX_op_extract2_{i32,i64}
->
->
-Signed-off-by: Richard Henderson <address@hidden>
->
->
-Please advise on further actions.
->
-Just to add a data point:
-
-If the following change is applied:
-
-diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
-index 928e8b8..b6a4cf2 100644
---- a/tcg/i386/tcg-target.h
-+++ b/tcg/i386/tcg-target.h
-@@ -124,7 +124,7 @@ extern bool have_avx2;
- #define TCG_TARGET_HAS_deposit_i32      1
- #define TCG_TARGET_HAS_extract_i32      1
- #define TCG_TARGET_HAS_sextract_i32     1
--#define TCG_TARGET_HAS_extract2_i32     1
-+#define TCG_TARGET_HAS_extract2_i32     0
- #define TCG_TARGET_HAS_movcond_i32      1
- #define TCG_TARGET_HAS_add2_i32         1
- #define TCG_TARGET_HAS_sub2_i32         1
-@@ -163,7 +163,7 @@ extern bool have_avx2;
- #define TCG_TARGET_HAS_deposit_i64      1
- #define TCG_TARGET_HAS_extract_i64      1
- #define TCG_TARGET_HAS_sextract_i64     0
--#define TCG_TARGET_HAS_extract2_i64     1
-+#define TCG_TARGET_HAS_extract2_i64     0
- #define TCG_TARGET_HAS_movcond_i64      1
- #define TCG_TARGET_HAS_add2_i64         1
- #define TCG_TARGET_HAS_sub2_i64         1
-
-... the problem disappears.
-
-
->
-Yours,
->
-Aleksandar
-
-On Fri, Jul 12, 2019 at 8:19 PM Aleksandar Markovic
-<address@hidden> wrote:
->
->
-On Fri, Jul 12, 2019 at 8:09 PM Aleksandar Markovic
->
-<address@hidden> wrote:
->
->
->
-> Hello, Richard, Peter, and others.
->
->
->
-> As a part of activities before 4.1 release, I tested nanoMIPS support
->
-> in QEMU (which was officially fully integrated in 4.0, is currently
->
-> limited to system mode only, and was tested in a similar fashion right
->
-> prior to 4.0).
->
->
->
-> This support appears to be broken now. Following command line works in
->
-> 4.0, but results in kernel panic for the current tip of the tree:
->
->
->
-> ~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
->
-> -cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
->
-> 1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
->
-> "mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
->
->
->
-> (kernel and rootfs image files used in this commend line can be
->
-> downloaded from the locations mentioned in our user guide)
->
->
->
-> The quick bisect points to the commit:
->
->
->
-> commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
->
-> Author: Richard Henderson <address@hidden>
->
-> Date:   Mon Feb 25 11:42:35 2019 -0800
->
->
->
->     tcg/i386: Support INDEX_op_extract2_{i32,i64}
->
->
->
->     Signed-off-by: Richard Henderson <address@hidden>
->
->
->
-> Please advise on further actions.
->
->
->
->
-Just to add a data point:
->
->
-If the following change is applied:
->
->
-diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
->
-index 928e8b8..b6a4cf2 100644
->
---- a/tcg/i386/tcg-target.h
->
-+++ b/tcg/i386/tcg-target.h
->
-@@ -124,7 +124,7 @@ extern bool have_avx2;
->
-#define TCG_TARGET_HAS_deposit_i32      1
->
-#define TCG_TARGET_HAS_extract_i32      1
->
-#define TCG_TARGET_HAS_sextract_i32     1
->
--#define TCG_TARGET_HAS_extract2_i32     1
->
-+#define TCG_TARGET_HAS_extract2_i32     0
->
-#define TCG_TARGET_HAS_movcond_i32      1
->
-#define TCG_TARGET_HAS_add2_i32         1
->
-#define TCG_TARGET_HAS_sub2_i32         1
->
-@@ -163,7 +163,7 @@ extern bool have_avx2;
->
-#define TCG_TARGET_HAS_deposit_i64      1
->
-#define TCG_TARGET_HAS_extract_i64      1
->
-#define TCG_TARGET_HAS_sextract_i64     0
->
--#define TCG_TARGET_HAS_extract2_i64     1
->
-+#define TCG_TARGET_HAS_extract2_i64     0
->
-#define TCG_TARGET_HAS_movcond_i64      1
->
-#define TCG_TARGET_HAS_add2_i64         1
->
-#define TCG_TARGET_HAS_sub2_i64         1
->
->
-... the problem disappears.
->
-It looks the problem is in this code segment in of tcg_gen_deposit_i32():
-
-        if (ofs == 0) {
-            tcg_gen_extract2_i32(ret, arg1, arg2, len);
-            tcg_gen_rotli_i32(ret, ret, len);
-            goto done;
-        }
-
-)
-
-If that code segment is deleted altogether (which effectively forces
-usage of "fallback" part of tcg_gen_deposit_i32()), the problem also
-vanishes (without changes from my previous mail).
-
->
->
-> Yours,
->
-> Aleksandar
-
-Aleksandar Markovic <address@hidden> writes:
-
->
-Hello, Richard, Peter, and others.
->
->
-As a part of activities before 4.1 release, I tested nanoMIPS support
->
-in QEMU (which was officially fully integrated in 4.0, is currently
->
-limited to system mode only, and was tested in a similar fashion right
->
-prior to 4.0).
->
->
-This support appears to be broken now. Following command line works in
->
-4.0, but results in kernel panic for the current tip of the tree:
->
->
-~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
->
--cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
->
-1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
->
-"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
->
->
-(kernel and rootfs image files used in this commend line can be
->
-downloaded from the locations mentioned in our user guide)
->
->
-The quick bisect points to the commit:
->
->
-commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
->
-Author: Richard Henderson <address@hidden>
->
-Date:   Mon Feb 25 11:42:35 2019 -0800
->
->
-tcg/i386: Support INDEX_op_extract2_{i32,i64}
->
->
-Signed-off-by: Richard Henderson <address@hidden>
->
->
-Please advise on further actions.
-Please see the fix:
-
-  Subject: [PATCH for-4.1] tcg: Fix constant folding of INDEX_op_extract2_i32
-  Date: Tue,  9 Jul 2019 14:19:00 +0200
-  Message-Id: <address@hidden>
-
->
->
-Yours,
->
-Aleksandar
---
-Alex Bennée
-
-On Sat, Jul 13, 2019 at 9:21 AM Alex Bennée <address@hidden> wrote:
->
->
-Please see the fix:
->
->
-Subject: [PATCH for-4.1] tcg: Fix constant folding of INDEX_op_extract2_i32
->
-Date: Tue,  9 Jul 2019 14:19:00 +0200
->
-Message-Id: <address@hidden>
->
-Thanks, this fixed the behavior.
-
-Sincerely,
-Aleksandar
-
->
->
->
->
-> Yours,
->
-> Aleksandar
->
->
->
---
->
-Alex Bennée
->
-
diff --git a/results/classifier/005/other/16056596 b/results/classifier/005/other/16056596
deleted file mode 100644
index c08ed7aa..00000000
--- a/results/classifier/005/other/16056596
+++ /dev/null
@@ -1,106 +0,0 @@
-other: 0.980
-semantic: 0.979
-assembly: 0.975
-instruction: 0.975
-device: 0.973
-boot: 0.971
-graphic: 0.970
-mistranslation: 0.961
-socket: 0.952
-vnc: 0.946
-network: 0.940
-KVM: 0.934
-
-[BUG][powerpc] KVM Guest Boot Failure and Hang at "Booting Linux via __start()"
-
-Bug Description:
-Encountering a boot failure when launching a KVM guest with
-'qemu-system-ppc64'. The guest hangs at boot, and the QEMU monitor
-crashes.
-Reproduction Steps:
-# qemu-system-ppc64 --version
-QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
-Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
-# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
-pseries,accel=kvm \
--m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
-  -device virtio-scsi-pci,id=scsi \
--drive
-file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
-\
--device scsi-hd,drive=drive0,bus=scsi.0 \
-  -netdev bridge,id=net0,br=virbr0 \
-  -device virtio-net-pci,netdev=net0 \
-  -serial pty \
-  -device virtio-balloon-pci \
-  -cpu host
-QEMU 9.2.50 monitor - type 'help' for more information
-char device redirected to /dev/pts/2 (label serial0)
-(qemu)
-(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
-unavailable: IRQ_XIVE capability must be present for KVM
-Falling back to kernel-irqchip=off
-** Qemu Hang
-
-(In another ssh session)
-# screen /dev/pts/2
-Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
-(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
-(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
-15:20:17 UTC 2024
-Detected machine type: 0000000000000101
-command line:
-BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
-root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
-Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
-Calling ibm,client-architecture-support... done
-memory layout at init:
-  memory_limit : 0000000000000000 (16 MB aligned)
-  alloc_bottom : 0000000008200000
-  alloc_top    : 0000000030000000
-  alloc_top_hi : 0000000800000000
-  rmo_top      : 0000000030000000
-  ram_top      : 0000000800000000
-instantiating rtas at 0x000000002fff0000... done
-prom_hold_cpus: skipped
-copying OF device tree...
-Building dt strings...
-Building dt structure...
-Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
-Device tree struct  0x0000000008220000 -> 0x0000000008230000
-Quiescing Open Firmware ...
-Booting Linux via __start() @ 0x0000000000440000 ...
-** Guest Console Hang
-
-
-Git Bisect:
-Performing git bisect points to the following patch:
-# git bisect bad
-e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
-commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
-Author: Nicholas Piggin <npiggin@gmail.com>
-Date:   Thu Dec 19 13:40:31 2024 +1000
-
-    target/ppc: fix timebase register reset state
-(H)DEC and PURR get reset before icount does, which causes them to
-be
-skewed and not match the init state. This can cause replay to not
-match the recorded trace exactly. For DEC and HDEC this is usually
-not
-noticable since they tend to get programmed before affecting the
-    target machine. PURR has been observed to cause replay bugs when
-    running Linux.
-
-    Fix this by resetting using a time of 0.
-
-    Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
-    Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
-
- hw/ppc/ppc.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
-
-Reverting the patch helps boot the guest.
-Thanks,
-Misbah Anjum N
-
diff --git a/results/classifier/005/other/16201167 b/results/classifier/005/other/16201167
deleted file mode 100644
index f2ac5def..00000000
--- a/results/classifier/005/other/16201167
+++ /dev/null
@@ -1,108 +0,0 @@
-other: 0.954
-mistranslation: 0.947
-vnc: 0.946
-graphic: 0.937
-semantic: 0.933
-KVM: 0.928
-instruction: 0.922
-device: 0.911
-assembly: 0.910
-socket: 0.892
-network: 0.864
-boot: 0.845
-
-[BUG] Qemu abort with error "kvm_mem_ioeventfd_add: error adding ioeventfd: File exists (17)"
-
-Hi list,
-
-When I did some tests in my virtual domain with live-attached virtio deivces, I 
-got a coredump file of Qemu.
-
-The error print from qemu is "kvm_mem_ioeventfd_add: error adding ioeventfd: 
-File exists (17)".
-And the call trace in the coredump file displays as below:
-#0  0x0000ffff89acecc8 in ?? () from /usr/lib64/libc.so.6
-#1  0x0000ffff89a8acbc in raise () from /usr/lib64/libc.so.6
-#2  0x0000ffff89a78d2c in abort () from /usr/lib64/libc.so.6
-#3  0x0000aaaabd7ccf1c in kvm_mem_ioeventfd_add (listener=<optimized out>, 
-section=<optimized out>, match_data=<optimized out>, data=<optimized out>, 
-e=<optimized out>) at ../accel/kvm/kvm-all.c:1607
-#4  0x0000aaaabd6e0304 in address_space_add_del_ioeventfds (fds_old_nb=164, 
-fds_old=0xffff5c80a1d0, fds_new_nb=160, fds_new=0xffff5c565080, 
-as=0xaaaabdfa8810 <address_space_memory>)
-    at ../softmmu/memory.c:795
-#5  address_space_update_ioeventfds (as=0xaaaabdfa8810 <address_space_memory>) 
-at ../softmmu/memory.c:856
-#6  0x0000aaaabd6e24d8 in memory_region_commit () at ../softmmu/memory.c:1113
-#7  0x0000aaaabd6e25c4 in memory_region_transaction_commit () at 
-../softmmu/memory.c:1144
-#8  0x0000aaaabd394eb4 in pci_bridge_update_mappings 
-(br=br@entry=0xaaaae755f7c0) at ../hw/pci/pci_bridge.c:248
-#9  0x0000aaaabd394f4c in pci_bridge_write_config (d=0xaaaae755f7c0, 
-address=44, val=<optimized out>, len=4) at ../hw/pci/pci_bridge.c:272
-#10 0x0000aaaabd39a928 in rp_write_config (d=0xaaaae755f7c0, address=44, 
-val=128, len=4) at ../hw/pci-bridge/pcie_root_port.c:39
-#11 0x0000aaaabd6df328 in memory_region_write_accessor (mr=0xaaaae63898d0, 
-addr=65580, value=<optimized out>, size=4, shift=<optimized out>, 
-mask=<optimized out>, attrs=...) at ../softmmu/memory.c:494
-#12 0x0000aaaabd6dcb6c in access_with_adjusted_size (addr=addr@entry=65580, 
-value=value@entry=0xffff817adc78, size=size@entry=4, access_size_min=<optimized 
-out>, access_size_max=<optimized out>,
-    access_fn=access_fn@entry=0xaaaabd6df284 <memory_region_write_accessor>, 
-mr=mr@entry=0xaaaae63898d0, attrs=attrs@entry=...) at ../softmmu/memory.c:556
-#13 0x0000aaaabd6e0dc8 in memory_region_dispatch_write 
-(mr=mr@entry=0xaaaae63898d0, addr=65580, data=<optimized out>, op=MO_32, 
-attrs=attrs@entry=...) at ../softmmu/memory.c:1534
-#14 0x0000aaaabd6d0574 in flatview_write_continue (fv=fv@entry=0xffff5c02da00, 
-addr=addr@entry=275146407980, attrs=attrs@entry=..., 
-ptr=ptr@entry=0xffff8aa8c028, len=len@entry=4,
-    addr1=<optimized out>, l=<optimized out>, mr=mr@entry=0xaaaae63898d0) at 
-/usr/src/debug/qemu-6.2.0-226.aarch64/include/qemu/host-utils.h:165
-#15 0x0000aaaabd6d4584 in flatview_write (len=4, buf=0xffff8aa8c028, attrs=..., 
-addr=275146407980, fv=0xffff5c02da00) at ../softmmu/physmem.c:3375
-#16 address_space_write (as=<optimized out>, addr=275146407980, attrs=..., 
-buf=buf@entry=0xffff8aa8c028, len=4) at ../softmmu/physmem.c:3467
-#17 0x0000aaaabd6d462c in address_space_rw (as=<optimized out>, addr=<optimized 
-out>, attrs=..., attrs@entry=..., buf=buf@entry=0xffff8aa8c028, len=<optimized 
-out>, is_write=<optimized out>)
-    at ../softmmu/physmem.c:3477
-#18 0x0000aaaabd7cf6e8 in kvm_cpu_exec (cpu=cpu@entry=0xaaaae625dfd0) at 
-../accel/kvm/kvm-all.c:2970
-#19 0x0000aaaabd7d09bc in kvm_vcpu_thread_fn (arg=arg@entry=0xaaaae625dfd0) at 
-../accel/kvm/kvm-accel-ops.c:49
-#20 0x0000aaaabd94ccd8 in qemu_thread_start (args=<optimized out>) at 
-../util/qemu-thread-posix.c:559
-
-
-By printing more info in the coredump file, I found that the addr of 
-fds_old[146] and fds_new[146] are same, but fds_old[146] belonged to a 
-live-attached virtio-scsi device while fds_new[146] was owned by another 
-live-attached virtio-net.
-The reason why addr conflicted was then been found from vm's console log. Just 
-before qemu aborted, the guest kernel crashed and kdump.service booted the 
-dump-capture kernel where re-alloced address for the devices.
-Because those virtio devices were live-attached after vm creating, different 
-addr may been assigned to them in the dump-capture kernel:
-
-the initial kernel booting log:
-[    1.663297] pci 0000:00:02.1: BAR 14: assigned [mem 0x11900000-0x11afffff]
-[    1.664560] pci 0000:00:02.1: BAR 15: assigned [mem 
-0x8001800000-0x80019fffff 64bit pref]
-
-the dump-capture kernel booting log:
-[    1.845211] pci 0000:00:02.0: BAR 14: assigned [mem 0x11900000-0x11bfffff]
-[    1.846542] pci 0000:00:02.0: BAR 15: assigned [mem 
-0x8001800000-0x8001afffff 64bit pref]
-
-
-I think directly aborting the qemu process may not be the best choice in this 
-case cuz it will interrupt the work of kdump.service so that failed to generate 
-memory dump of the crashed guest kernel.
-Perhaps, IMO, the error could be simply ignored in this case and just let kdump 
-to reboot the system after memory-dump finishing, but I failed to find a 
-suitable judgment in the codes.
-
-Any solution for this problem? Hope I can get some helps here.
-
-Hao
-
diff --git a/results/classifier/005/other/16228234 b/results/classifier/005/other/16228234
deleted file mode 100644
index dcb69d04..00000000
--- a/results/classifier/005/other/16228234
+++ /dev/null
@@ -1,1852 +0,0 @@
-other: 0.535
-mistranslation: 0.518
-KVM: 0.445
-instruction: 0.442
-network: 0.440
-device: 0.439
-assembly: 0.435
-vnc: 0.420
-semantic: 0.411
-graphic: 0.408
-boot: 0.402
-socket: 0.401
-
-[Qemu-devel] [Bug?] BQL about live migration
-
-Hello Juan & Dave,
-
-We hit a bug in our test:
-Network error occurs when migrating a guest, libvirt then rollback the
-migration, causes qemu coredump
-qemu log:
-2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
- {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": "STOP"}
-2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
- qmp_cmd_name: migrate_cancel
-2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
- {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": 
-"MIGRATION", "data": {"status": "cancelling"}}
-2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
- qmp_cmd_name: cont
-2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
- virtio-balloon device status is 7 that means DRIVER OK
-2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
- virtio-net device status is 7 that means DRIVER OK
-2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
- virtio-blk device status is 7 that means DRIVER OK
-2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
- virtio-serial device status is 7 that means DRIVER OK
-2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: 
-vm_state-notify:3ms
-2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
- {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": 
-"RESUME"}
-2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
- this iteration cycle takes 3s, new dirtied data:0MB
-2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
- {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": 
-"MIGRATION_PASS", "data": {"pass": 3}}
-2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for 
-(131583/18446744073709551615)
-qemu-kvm: /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: 
-virtio_net_save: Assertion `!n->vhost_started' failed.
-2017-03-01 12:54:43.028: shutting down
-
->
-From qemu log, qemu received and processed migrate_cancel/cont qmp commands
-after guest been stopped and entered the last round of migration. Then
-migration thread try to save device state when guest is running(started by
-cont command), causes assert and coredump.
-This is because in last iter, we call cpu_synchronize_all_states() to
-synchronize vcpu states, this call will release qemu_global_mutex and wait
-for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
-(gdb) bt
-#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from 
-/lib64/libpthread.so.0
-#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 <qemu_work_cond>, 
-mutex=0x7f764445eba0 <qemu_global_mutex>) at util/qemu-thread-posix.c:132
-#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413 
-<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at 
-/mnt/public/yanghy/qemu-kvm/cpus.c:995
-#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at 
-/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
-#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at 
-/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
-#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at 
-/mnt/public/yanghy/qemu-kvm/cpus.c:766
-#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy (f=0x7f76462f2d30, 
-iterable_only=false) at /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
-#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 
-<current_migration.37571>, current_active_state=4, 
-old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at 
-migration/migration.c:1753
-#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 
-<current_migration.37571>) at migration/migration.c:1922
-#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
-#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
-(gdb) p iothread_locked
-$1 = true
-
-and then, qemu main thread been executed, it won't block because migration
-thread released the qemu_global_mutex:
-(gdb) thr 1
-[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
-#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", 
-timeout);
-(gdb) p iothread_locked
-$2 = true
-(gdb) l 268
-263
-264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, 
-timeout);
-265
-266
-267         if (timeout) {
-268             qemu_mutex_lock_iothread();
-269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", 
-timeout);
-271             }
-272         }
-(gdb)
-
-So, although we've hold iothread_lock in stop&copy phase of migration, we
-can't guarantee the iothread been locked all through the stop & copy phase,
-any thoughts on how to solve this problem?
-
-
-Thanks,
--Gonglei
-
-On Fri, 03/03 09:29, Gonglei (Arei) wrote:
->
-Hello Juan & Dave,
->
->
-We hit a bug in our test:
->
-Network error occurs when migrating a guest, libvirt then rollback the
->
-migration, causes qemu coredump
->
-qemu log:
->
-2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
->
-"STOP"}
->
-2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
-qmp_cmd_name: migrate_cancel
->
-2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
->
-"MIGRATION", "data": {"status": "cancelling"}}
->
-2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
-qmp_cmd_name: cont
->
-2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-balloon device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-net device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-blk device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-serial device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
->
-vm_state-notify:3ms
->
-2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
->
-"RESUME"}
->
-2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
->
-this iteration cycle takes 3s, new dirtied data:0MB
->
-2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
->
-"MIGRATION_PASS", "data": {"pass": 3}}
->
-2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
->
-(131583/18446744073709551615)
->
-qemu-kvm:
->
-/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
->
-virtio_net_save: Assertion `!n->vhost_started' failed.
->
-2017-03-01 12:54:43.028: shutting down
->
->
-From qemu log, qemu received and processed migrate_cancel/cont qmp commands
->
-after guest been stopped and entered the last round of migration. Then
->
-migration thread try to save device state when guest is running(started by
->
-cont command), causes assert and coredump.
->
-This is because in last iter, we call cpu_synchronize_all_states() to
->
-synchronize vcpu states, this call will release qemu_global_mutex and wait
->
-for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
->
-(gdb) bt
->
-#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
->
-/lib64/libpthread.so.0
->
-#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
->
-<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
->
-util/qemu-thread-posix.c:132
->
-#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413
->
-<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/cpus.c:995
->
-#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
->
-#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
->
-#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
->
-/mnt/public/yanghy/qemu-kvm/cpus.c:766
->
-#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
->
-(f=0x7f76462f2d30, iterable_only=false) at
->
-/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
->
-#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
->
-<current_migration.37571>, current_active_state=4,
->
-old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
->
-migration/migration.c:1753
->
-#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
->
-<current_migration.37571>) at migration/migration.c:1922
->
-#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
->
-#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
->
-(gdb) p iothread_locked
->
-$1 = true
->
->
-and then, qemu main thread been executed, it won't block because migration
->
-thread released the qemu_global_mutex:
->
-(gdb) thr 1
->
-[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
->
-#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
->
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-%d\n", timeout);
->
-(gdb) p iothread_locked
->
-$2 = true
->
-(gdb) l 268
->
-263
->
-264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
->
-timeout);
->
-265
->
-266
->
-267         if (timeout) {
->
-268             qemu_mutex_lock_iothread();
->
-269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
->
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-%d\n", timeout);
->
-271             }
->
-272         }
->
-(gdb)
->
->
-So, although we've hold iothread_lock in stop&copy phase of migration, we
->
-can't guarantee the iothread been locked all through the stop & copy phase,
->
-any thoughts on how to solve this problem?
-Could you post a backtrace of the assertion?
-
-Fam
-
-On 2017/3/3 18:42, Fam Zheng wrote:
->
-On Fri, 03/03 09:29, Gonglei (Arei) wrote:
->
-> Hello Juan & Dave,
->
->
->
-> We hit a bug in our test:
->
-> Network error occurs when migrating a guest, libvirt then rollback the
->
-> migration, causes qemu coredump
->
-> qemu log:
->
-> 2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
->  {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
->
-> "STOP"}
->
-> 2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
->  qmp_cmd_name: migrate_cancel
->
-> 2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
->  {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
->
-> "MIGRATION", "data": {"status": "cancelling"}}
->
-> 2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
->  qmp_cmd_name: cont
->
-> 2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
->  virtio-balloon device status is 7 that means DRIVER OK
->
-> 2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
->  virtio-net device status is 7 that means DRIVER OK
->
-> 2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
->  virtio-blk device status is 7 that means DRIVER OK
->
-> 2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
->  virtio-serial device status is 7 that means DRIVER OK
->
-> 2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
->
-> vm_state-notify:3ms
->
-> 2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
->  {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
->
-> "RESUME"}
->
-> 2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
->
->  this iteration cycle takes 3s, new dirtied data:0MB
->
-> 2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
->  {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
->
-> "MIGRATION_PASS", "data": {"pass": 3}}
->
-> 2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
->
-> (131583/18446744073709551615)
->
-> qemu-kvm:
->
-> /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
->
-> virtio_net_save: Assertion `!n->vhost_started' failed.
->
-> 2017-03-01 12:54:43.028: shutting down
->
->
->
-> From qemu log, qemu received and processed migrate_cancel/cont qmp commands
->
-> after guest been stopped and entered the last round of migration. Then
->
-> migration thread try to save device state when guest is running(started by
->
-> cont command), causes assert and coredump.
->
-> This is because in last iter, we call cpu_synchronize_all_states() to
->
-> synchronize vcpu states, this call will release qemu_global_mutex and wait
->
-> for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
->
-> (gdb) bt
->
-> #0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
->
-> /lib64/libpthread.so.0
->
-> #1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
->
-> <qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
->
-> util/qemu-thread-posix.c:132
->
-> #2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80,
->
-> func=0x7f7643a46413 <do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
->
-> /mnt/public/yanghy/qemu-kvm/cpus.c:995
->
-> #3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-> /mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
->
-> #4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-> /mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
->
-> #5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
->
-> /mnt/public/yanghy/qemu-kvm/cpus.c:766
->
-> #6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
->
-> (f=0x7f76462f2d30, iterable_only=false) at
->
-> /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
->
-> #7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
->
-> <current_migration.37571>, current_active_state=4,
->
-> old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
->
-> migration/migration.c:1753
->
-> #8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
->
-> <current_migration.37571>) at migration/migration.c:1922
->
-> #9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
->
-> #10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
->
-> (gdb) p iothread_locked
->
-> $1 = true
->
->
->
-> and then, qemu main thread been executed, it won't block because migration
->
-> thread released the qemu_global_mutex:
->
-> (gdb) thr 1
->
-> [Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
->
-> #0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
->
-> 270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-> %d\n", timeout);
->
-> (gdb) p iothread_locked
->
-> $2 = true
->
-> (gdb) l 268
->
-> 263
->
-> 264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
->
-> timeout);
->
-> 265
->
-> 266
->
-> 267         if (timeout) {
->
-> 268             qemu_mutex_lock_iothread();
->
-> 269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
->
-> 270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-> %d\n", timeout);
->
-> 271             }
->
-> 272         }
->
-> (gdb)
->
->
->
-> So, although we've hold iothread_lock in stop&copy phase of migration, we
->
-> can't guarantee the iothread been locked all through the stop & copy phase,
->
-> any thoughts on how to solve this problem?
->
->
-Could you post a backtrace of the assertion?
-#0  0x00007f97b1fbe5d7 in raise () from /usr/lib64/libc.so.6
-#1  0x00007f97b1fbfcc8 in abort () from /usr/lib64/libc.so.6
-#2  0x00007f97b1fb7546 in __assert_fail_base () from /usr/lib64/libc.so.6
-#3  0x00007f97b1fb75f2 in __assert_fail () from /usr/lib64/libc.so.6
-#4  0x000000000049fd19 in virtio_net_save (f=0x7f97a8ca44d0, 
-opaque=0x7f97a86e9018) at /usr/src/debug/qemu-kvm-2.6.0/hw/
-#5  0x000000000047e380 in vmstate_save_old_style (address@hidden, 
-address@hidden, se=0x7f9
-#6  0x000000000047fb93 in vmstate_save (address@hidden, address@hidden, 
-address@hidden
-#7  0x0000000000481ad2 in qemu_savevm_state_complete_precopy (f=0x7f97a8ca44d0, 
-address@hidden)
-#8  0x00000000006c6b60 in migration_completion (address@hidden 
-<current_migration.38312>, current_active_state=curre
-    address@hidden) at migration/migration.c:1761
-#9  0x00000000006c71db in migration_thread (address@hidden 
-<current_migration.38312>) at migration/migrati
-
->
->
-Fam
->
---
-Thanks,
-Yang
-
-* Gonglei (Arei) (address@hidden) wrote:
->
-Hello Juan & Dave,
-cc'ing in pbonzini since it's magic involving cpu_synrhonize_all_states()
-
->
-We hit a bug in our test:
->
-Network error occurs when migrating a guest, libvirt then rollback the
->
-migration, causes qemu coredump
->
-qemu log:
->
-2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
->
-"STOP"}
->
-2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
-qmp_cmd_name: migrate_cancel
->
-2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
->
-"MIGRATION", "data": {"status": "cancelling"}}
->
-2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
->
-qmp_cmd_name: cont
->
-2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-balloon device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-net device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-blk device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
->
-virtio-serial device status is 7 that means DRIVER OK
->
-2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
->
-vm_state-notify:3ms
->
-2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
->
-"RESUME"}
->
-2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
->
-this iteration cycle takes 3s, new dirtied data:0MB
->
-2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
->
-{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
->
-"MIGRATION_PASS", "data": {"pass": 3}}
->
-2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
->
-(131583/18446744073709551615)
->
-qemu-kvm:
->
-/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
->
-virtio_net_save: Assertion `!n->vhost_started' failed.
->
-2017-03-01 12:54:43.028: shutting down
->
->
-From qemu log, qemu received and processed migrate_cancel/cont qmp commands
->
-after guest been stopped and entered the last round of migration. Then
->
-migration thread try to save device state when guest is running(started by
->
-cont command), causes assert and coredump.
->
-This is because in last iter, we call cpu_synchronize_all_states() to
->
-synchronize vcpu states, this call will release qemu_global_mutex and wait
->
-for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
->
-(gdb) bt
->
-#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
->
-/lib64/libpthread.so.0
->
-#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
->
-<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
->
-util/qemu-thread-posix.c:132
->
-#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413
->
-<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/cpus.c:995
->
-#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
->
-#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
->
-/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
->
-#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
->
-/mnt/public/yanghy/qemu-kvm/cpus.c:766
->
-#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
->
-(f=0x7f76462f2d30, iterable_only=false) at
->
-/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
->
-#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
->
-<current_migration.37571>, current_active_state=4,
->
-old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
->
-migration/migration.c:1753
->
-#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
->
-<current_migration.37571>) at migration/migration.c:1922
->
-#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
->
-#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
->
-(gdb) p iothread_locked
->
-$1 = true
->
->
-and then, qemu main thread been executed, it won't block because migration
->
-thread released the qemu_global_mutex:
->
-(gdb) thr 1
->
-[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
->
-#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
->
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-%d\n", timeout);
->
-(gdb) p iothread_locked
->
-$2 = true
->
-(gdb) l 268
->
-263
->
-264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
->
-timeout);
->
-265
->
-266
->
-267         if (timeout) {
->
-268             qemu_mutex_lock_iothread();
->
-269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
->
-270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
->
-%d\n", timeout);
->
-271             }
->
-272         }
->
-(gdb)
->
->
-So, although we've hold iothread_lock in stop&copy phase of migration, we
->
-can't guarantee the iothread been locked all through the stop & copy phase,
->
-any thoughts on how to solve this problem?
-Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
-their were times when run_on_cpu would have to drop the BQL and I worried about 
-it,
-but this is the 1st time I've seen an error due to it.
-
-Do you know what the migration state was at that point? Was it 
-MIGRATION_STATUS_CANCELLING?
-I'm thinking perhaps we should stop 'cont' from continuing while migration is in
-MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED - so 
-that
-perhaps libvirt could avoid sending the 'cont' until then?
-
-Dave
-
-
->
->
-Thanks,
->
--Gonglei
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
-Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
->
-their were times when run_on_cpu would have to drop the BQL and I worried
->
-about it,
->
-but this is the 1st time I've seen an error due to it.
->
->
-Do you know what the migration state was at that point? Was it
->
-MIGRATION_STATUS_CANCELLING?
->
-I'm thinking perhaps we should stop 'cont' from continuing while migration is
->
-in
->
-MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED - so
->
-that
->
-perhaps libvirt could avoid sending the 'cont' until then?
-No, there's no event, though I thought libvirt would poll until
-"query-migrate" returns the cancelled state.  Of course that is a small
-consolation, because a segfault is unacceptable.
-
-One possibility is to suspend the monitor in qmp_migrate_cancel and
-resume it (with add_migration_state_change_notifier) when we hit the
-CANCELLED state.  I'm not sure what the latency would be between the end
-of migrate_fd_cancel and finally reaching CANCELLED.
-
-Paolo
-
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
-On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
-> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
->
-> their were times when run_on_cpu would have to drop the BQL and I worried
->
-> about it,
->
-> but this is the 1st time I've seen an error due to it.
->
->
->
-> Do you know what the migration state was at that point? Was it
->
-> MIGRATION_STATUS_CANCELLING?
->
-> I'm thinking perhaps we should stop 'cont' from continuing while migration
->
-> is in
->
-> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
->
-> so that
->
-> perhaps libvirt could avoid sending the 'cont' until then?
->
->
-No, there's no event, though I thought libvirt would poll until
->
-"query-migrate" returns the cancelled state.  Of course that is a small
->
-consolation, because a segfault is unacceptable.
-I think you might get an event if you set the new migrate capability called
-'events' on!
-
-void migrate_set_state(int *state, int old_state, int new_state)
-{
-    if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
-        trace_migrate_set_state(new_state);
-        migrate_generate_event(new_state);
-    }
-}
-
-static void migrate_generate_event(int new_state)
-{
-    if (migrate_use_events()) {
-        qapi_event_send_migration(new_state, &error_abort); 
-    }
-}
-
-That event feature went in sometime after 2.3.0.
-
->
-One possibility is to suspend the monitor in qmp_migrate_cancel and
->
-resume it (with add_migration_state_change_notifier) when we hit the
->
-CANCELLED state.  I'm not sure what the latency would be between the end
->
-of migrate_fd_cancel and finally reaching CANCELLED.
-I don't like suspending monitors; it can potentially take quite a significant
-time to do a cancel.
-How about making 'cont' fail if we're in CANCELLING?
-
-I'd really love to see the 'run_on_cpu' being more careful about the BQL;
-we really need all of the rest of the devices to stay quiesced at times.
-
-Dave
-
->
-Paolo
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
->
->
-> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
->> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
->
->> their were times when run_on_cpu would have to drop the BQL and I worried
->
->> about it,
->
->> but this is the 1st time I've seen an error due to it.
->
->>
->
->> Do you know what the migration state was at that point? Was it
->
->> MIGRATION_STATUS_CANCELLING?
->
->> I'm thinking perhaps we should stop 'cont' from continuing while migration
->
->> is in
->
->> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
->
->> so that
->
->> perhaps libvirt could avoid sending the 'cont' until then?
->
->
->
-> No, there's no event, though I thought libvirt would poll until
->
-> "query-migrate" returns the cancelled state.  Of course that is a small
->
-> consolation, because a segfault is unacceptable.
->
->
-I think you might get an event if you set the new migrate capability called
->
-'events' on!
->
->
-void migrate_set_state(int *state, int old_state, int new_state)
->
-{
->
-if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
->
-trace_migrate_set_state(new_state);
->
-migrate_generate_event(new_state);
->
-}
->
-}
->
->
-static void migrate_generate_event(int new_state)
->
-{
->
-if (migrate_use_events()) {
->
-qapi_event_send_migration(new_state, &error_abort);
->
-}
->
-}
->
->
-That event feature went in sometime after 2.3.0.
->
->
-> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
-> resume it (with add_migration_state_change_notifier) when we hit the
->
-> CANCELLED state.  I'm not sure what the latency would be between the end
->
-> of migrate_fd_cancel and finally reaching CANCELLED.
->
->
-I don't like suspending monitors; it can potentially take quite a significant
->
-time to do a cancel.
->
-How about making 'cont' fail if we're in CANCELLING?
-Actually I thought that would be the case already (in fact CANCELLING is
-internal only; the outside world sees it as "active" in query-migrate).
-
-Lei, what is the runstate?  (That is, why did cont succeed at all)?
-
-Paolo
-
->
-I'd really love to see the 'run_on_cpu' being more careful about the BQL;
->
-we really need all of the rest of the devices to stay quiesced at times.
-That's not really possible, because of how condition variables work. :(
-
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
-On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
-> * Paolo Bonzini (address@hidden) wrote:
->
->>
->
->>
->
->> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
->>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
->
->>> that
->
->>> their were times when run_on_cpu would have to drop the BQL and I worried
->
->>> about it,
->
->>> but this is the 1st time I've seen an error due to it.
->
->>>
->
->>> Do you know what the migration state was at that point? Was it
->
->>> MIGRATION_STATUS_CANCELLING?
->
->>> I'm thinking perhaps we should stop 'cont' from continuing while
->
->>> migration is in
->
->>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
->
->>> so that
->
->>> perhaps libvirt could avoid sending the 'cont' until then?
->
->>
->
->> No, there's no event, though I thought libvirt would poll until
->
->> "query-migrate" returns the cancelled state.  Of course that is a small
->
->> consolation, because a segfault is unacceptable.
->
->
->
-> I think you might get an event if you set the new migrate capability called
->
-> 'events' on!
->
->
->
-> void migrate_set_state(int *state, int old_state, int new_state)
->
-> {
->
->     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
->
->         trace_migrate_set_state(new_state);
->
->         migrate_generate_event(new_state);
->
->     }
->
-> }
->
->
->
-> static void migrate_generate_event(int new_state)
->
-> {
->
->     if (migrate_use_events()) {
->
->         qapi_event_send_migration(new_state, &error_abort);
->
->     }
->
-> }
->
->
->
-> That event feature went in sometime after 2.3.0.
->
->
->
->> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
->> resume it (with add_migration_state_change_notifier) when we hit the
->
->> CANCELLED state.  I'm not sure what the latency would be between the end
->
->> of migrate_fd_cancel and finally reaching CANCELLED.
->
->
->
-> I don't like suspending monitors; it can potentially take quite a
->
-> significant
->
-> time to do a cancel.
->
-> How about making 'cont' fail if we're in CANCELLING?
->
->
-Actually I thought that would be the case already (in fact CANCELLING is
->
-internal only; the outside world sees it as "active" in query-migrate).
->
->
-Lei, what is the runstate?  (That is, why did cont succeed at all)?
-I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device
-save, and that's what we get at the end of a migrate and it's legal to restart
-from there.
-
->
-Paolo
->
->
-> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
->
-> we really need all of the rest of the devices to stay quiesced at times.
->
->
-That's not really possible, because of how condition variables work. :(
-*Really* we need to find a solution to that - there's probably lots of 
-other things that can spring up in that small window other than the
-'cont'.
-
-Dave
-
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
->
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
->
->
-> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
->> * Paolo Bonzini (address@hidden) wrote:
->
->>>
->
->>>
->
->>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
->>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
->
->>>> that
->
->>>> their were times when run_on_cpu would have to drop the BQL and I worried
->
->>>> about it,
->
->>>> but this is the 1st time I've seen an error due to it.
->
->>>>
->
->>>> Do you know what the migration state was at that point? Was it
->
->>>> MIGRATION_STATUS_CANCELLING?
->
->>>> I'm thinking perhaps we should stop 'cont' from continuing while
->
->>>> migration is in
->
->>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
->
->>>> so that
->
->>>> perhaps libvirt could avoid sending the 'cont' until then?
->
->>>
->
->>> No, there's no event, though I thought libvirt would poll until
->
->>> "query-migrate" returns the cancelled state.  Of course that is a small
->
->>> consolation, because a segfault is unacceptable.
->
->>
->
->> I think you might get an event if you set the new migrate capability called
->
->> 'events' on!
->
->>
->
->> void migrate_set_state(int *state, int old_state, int new_state)
->
->> {
->
->>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
->
->>         trace_migrate_set_state(new_state);
->
->>         migrate_generate_event(new_state);
->
->>     }
->
->> }
->
->>
->
->> static void migrate_generate_event(int new_state)
->
->> {
->
->>     if (migrate_use_events()) {
->
->>         qapi_event_send_migration(new_state, &error_abort);
->
->>     }
->
->> }
->
->>
->
->> That event feature went in sometime after 2.3.0.
->
->>
->
->>> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
->>> resume it (with add_migration_state_change_notifier) when we hit the
->
->>> CANCELLED state.  I'm not sure what the latency would be between the end
->
->>> of migrate_fd_cancel and finally reaching CANCELLED.
->
->>
->
->> I don't like suspending monitors; it can potentially take quite a
->
->> significant
->
->> time to do a cancel.
->
->> How about making 'cont' fail if we're in CANCELLING?
->
->
->
-> Actually I thought that would be the case already (in fact CANCELLING is
->
-> internal only; the outside world sees it as "active" in query-migrate).
->
->
->
-> Lei, what is the runstate?  (That is, why did cont succeed at all)?
->
->
-I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device
->
-save, and that's what we get at the end of a migrate and it's legal to restart
->
-from there.
-Yeah, but I think we get there at the end of a failed migrate only.  So
-perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid
-"cont" from finish-migrate (only allow it from failed-migrate)?
-
-Paolo
-
->
-> Paolo
->
->
->
->> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
->
->> we really need all of the rest of the devices to stay quiesced at times.
->
->
->
-> That's not really possible, because of how condition variables work. :(
->
->
-*Really* we need to find a solution to that - there's probably lots of
->
-other things that can spring up in that small window other than the
->
-'cont'.
->
->
-Dave
->
->
---
->
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
-
-Hi Paolo,
-
-On Fri, Mar 3, 2017 at 9:33 PM, Paolo Bonzini <address@hidden> wrote:
-
->
->
->
-On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
->
-> * Paolo Bonzini (address@hidden) wrote:
->
->>
->
->>
->
->> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
->>> * Paolo Bonzini (address@hidden) wrote:
->
->>>>
->
->>>>
->
->>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
->>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while
->
-ago that
->
->>>>> their were times when run_on_cpu would have to drop the BQL and I
->
-worried about it,
->
->>>>> but this is the 1st time I've seen an error due to it.
->
->>>>>
->
->>>>> Do you know what the migration state was at that point? Was it
->
-MIGRATION_STATUS_CANCELLING?
->
->>>>> I'm thinking perhaps we should stop 'cont' from continuing while
->
-migration is in
->
->>>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit
->
-CANCELLED - so that
->
->>>>> perhaps libvirt could avoid sending the 'cont' until then?
->
->>>>
->
->>>> No, there's no event, though I thought libvirt would poll until
->
->>>> "query-migrate" returns the cancelled state.  Of course that is a
->
-small
->
->>>> consolation, because a segfault is unacceptable.
->
->>>
->
->>> I think you might get an event if you set the new migrate capability
->
-called
->
->>> 'events' on!
->
->>>
->
->>> void migrate_set_state(int *state, int old_state, int new_state)
->
->>> {
->
->>>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
->
->>>         trace_migrate_set_state(new_state);
->
->>>         migrate_generate_event(new_state);
->
->>>     }
->
->>> }
->
->>>
->
->>> static void migrate_generate_event(int new_state)
->
->>> {
->
->>>     if (migrate_use_events()) {
->
->>>         qapi_event_send_migration(new_state, &error_abort);
->
->>>     }
->
->>> }
->
->>>
->
->>> That event feature went in sometime after 2.3.0.
->
->>>
->
->>>> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
->>>> resume it (with add_migration_state_change_notifier) when we hit the
->
->>>> CANCELLED state.  I'm not sure what the latency would be between the
->
-end
->
->>>> of migrate_fd_cancel and finally reaching CANCELLED.
->
->>>
->
->>> I don't like suspending monitors; it can potentially take quite a
->
-significant
->
->>> time to do a cancel.
->
->>> How about making 'cont' fail if we're in CANCELLING?
->
->>
->
->> Actually I thought that would be the case already (in fact CANCELLING is
->
->> internal only; the outside world sees it as "active" in query-migrate).
->
->>
->
->> Lei, what is the runstate?  (That is, why did cont succeed at all)?
->
->
->
-> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
->
-device
->
-> save, and that's what we get at the end of a migrate and it's legal to
->
-restart
->
-> from there.
->
->
-Yeah, but I think we get there at the end of a failed migrate only.  So
->
-perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE
-I think we do not need to introduce a new state here. If we hit 'cont' and
-the run state is RUN_STATE_FINISH_MIGRATE, we could assume that
-migration failed because 'RUN_STATE_FINISH_MIGRATE' only exists on
-source side, means we are finishing migration, a 'cont' at the meantime
-indicates that we are rolling back, otherwise source side should be
-destroyed.
-
-
->
-and forbid
->
-"cont" from finish-migrate (only allow it from failed-migrate)?
->
-The problem of forbid 'cont' here is that it will result in a failed
-migration and the source
-side will remain paused. We actually expect a usable guest when rollback.
-Is there a way to kill migration thread when we're under main thread, if
-there is, we
-could do the following to solve this problem:
-1. 'cont' received during runstate RUN_STATE_FINISH_MIGRATE
-2. kill migration thread
-3. vm_start()
-
-But this only solves 'cont' problem. As Dave said before, other things could
-happen during the small windows while we are finishing migration, that's
-what I was worried about...
-
-
->
-Paolo
->
->
->> Paolo
->
->>
->
->>> I'd really love to see the 'run_on_cpu' being more careful about the
->
-BQL;
->
->>> we really need all of the rest of the devices to stay quiesced at
->
-times.
->
->>
->
->> That's not really possible, because of how condition variables work. :(
->
->
->
-> *Really* we need to find a solution to that - there's probably lots of
->
-> other things that can spring up in that small window other than the
->
-> 'cont'.
->
->
->
-> Dave
->
->
->
-> --
->
-> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
->
->
-
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
-On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
->
-> * Paolo Bonzini (address@hidden) wrote:
->
->>
->
->>
->
->> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
->>> * Paolo Bonzini (address@hidden) wrote:
->
->>>>
->
->>>>
->
->>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
->>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
->
->>>>> that
->
->>>>> their were times when run_on_cpu would have to drop the BQL and I
->
->>>>> worried about it,
->
->>>>> but this is the 1st time I've seen an error due to it.
->
->>>>>
->
->>>>> Do you know what the migration state was at that point? Was it
->
->>>>> MIGRATION_STATUS_CANCELLING?
->
->>>>> I'm thinking perhaps we should stop 'cont' from continuing while
->
->>>>> migration is in
->
->>>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED
->
->>>>> - so that
->
->>>>> perhaps libvirt could avoid sending the 'cont' until then?
->
->>>>
->
->>>> No, there's no event, though I thought libvirt would poll until
->
->>>> "query-migrate" returns the cancelled state.  Of course that is a small
->
->>>> consolation, because a segfault is unacceptable.
->
->>>
->
->>> I think you might get an event if you set the new migrate capability
->
->>> called
->
->>> 'events' on!
->
->>>
->
->>> void migrate_set_state(int *state, int old_state, int new_state)
->
->>> {
->
->>>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
->
->>>         trace_migrate_set_state(new_state);
->
->>>         migrate_generate_event(new_state);
->
->>>     }
->
->>> }
->
->>>
->
->>> static void migrate_generate_event(int new_state)
->
->>> {
->
->>>     if (migrate_use_events()) {
->
->>>         qapi_event_send_migration(new_state, &error_abort);
->
->>>     }
->
->>> }
->
->>>
->
->>> That event feature went in sometime after 2.3.0.
->
->>>
->
->>>> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
->>>> resume it (with add_migration_state_change_notifier) when we hit the
->
->>>> CANCELLED state.  I'm not sure what the latency would be between the end
->
->>>> of migrate_fd_cancel and finally reaching CANCELLED.
->
->>>
->
->>> I don't like suspending monitors; it can potentially take quite a
->
->>> significant
->
->>> time to do a cancel.
->
->>> How about making 'cont' fail if we're in CANCELLING?
->
->>
->
->> Actually I thought that would be the case already (in fact CANCELLING is
->
->> internal only; the outside world sees it as "active" in query-migrate).
->
->>
->
->> Lei, what is the runstate?  (That is, why did cont succeed at all)?
->
->
->
-> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
->
-> device
->
-> save, and that's what we get at the end of a migrate and it's legal to
->
-> restart
->
-> from there.
->
->
-Yeah, but I think we get there at the end of a failed migrate only.  So
->
-perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid
->
-"cont" from finish-migrate (only allow it from failed-migrate)?
-OK, I was wrong in my previous statement; we actually go 
-FINISH_MIGRATE->POSTMIGRATE
-so no new state is needed; you shouldn't be restarting the cpu in 
-FINISH_MIGRATE.
-
-My preference is to get libvirt to wait for the transition to POSTMIGRATE before
-it issues the 'cont'.  I'd rather not block the monitor with 'cont' but I'm
-not sure how we'd cleanly make cont fail without breaking existing libvirts
-that usually don't hit this race. (cc'ing in Jiri).
-
-Dave
-
->
-Paolo
->
->
->> Paolo
->
->>
->
->>> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
->
->>> we really need all of the rest of the devices to stay quiesced at times.
->
->>
->
->> That's not really possible, because of how condition variables work. :(
->
->
->
-> *Really* we need to find a solution to that - there's probably lots of
->
-> other things that can spring up in that small window other than the
->
-> 'cont'.
->
->
->
-> Dave
->
->
->
-> --
->
-> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-Hi Dave,
-
-On Fri, Mar 3, 2017 at 9:26 PM, Dr. David Alan Gilbert <address@hidden>
-wrote:
-
->
-* Paolo Bonzini (address@hidden) wrote:
->
->
->
->
->
-> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
->
-> > * Paolo Bonzini (address@hidden) wrote:
->
-> >>
->
-> >>
->
-> >> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
->
-...
->
-> > That event feature went in sometime after 2.3.0.
->
-> >
->
-> >> One possibility is to suspend the monitor in qmp_migrate_cancel and
->
-> >> resume it (with add_migration_state_change_notifier) when we hit the
->
-> >> CANCELLED state.  I'm not sure what the latency would be between the
->
-end
->
-> >> of migrate_fd_cancel and finally reaching CANCELLED.
->
-> >
->
-> > I don't like suspending monitors; it can potentially take quite a
->
-significant
->
-> > time to do a cancel.
->
-> > How about making 'cont' fail if we're in CANCELLING?
->
->
->
-> Actually I thought that would be the case already (in fact CANCELLING is
->
-> internal only; the outside world sees it as "active" in query-migrate).
->
->
->
-> Lei, what is the runstate?  (That is, why did cont succeed at all)?
->
->
-I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
->
-device
->
-It is RUN_STATE_FINISH_MIGRATE.
-
-
->
-save, and that's what we get at the end of a migrate and it's legal to
->
-restart
->
-from there.
->
->
-> Paolo
->
->
->
-> > I'd really love to see the 'run_on_cpu' being more careful about the
->
-BQL;
->
-> > we really need all of the rest of the devices to stay quiesced at
->
-times.
->
->
->
-> That's not really possible, because of how condition variables work. :(
->
->
-*Really* we need to find a solution to that - there's probably lots of
->
-other things that can spring up in that small window other than the
->
-'cont'.
->
-This is what I was worry about. Not only sync_cpu_state() will call
-run_on_cpu()
-but also vm_stop_force_state() will, both of them did hit the small windows
-in our
-test.
-
-
->
->
-Dave
->
->
---
->
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
-
diff --git a/results/classifier/005/other/17743720 b/results/classifier/005/other/17743720
deleted file mode 100644
index a3f02429..00000000
--- a/results/classifier/005/other/17743720
+++ /dev/null
@@ -1,779 +0,0 @@
-other: 0.984
-graphic: 0.972
-device: 0.971
-instruction: 0.966
-assembly: 0.966
-semantic: 0.962
-mistranslation: 0.959
-socket: 0.954
-vnc: 0.945
-boot: 0.945
-network: 0.944
-KVM: 0.933
-
-[Qemu-devel] [BUG] living migrate vm pause forever
-
-Sometimes, living migrate vm pause forever, migrate job stop, but very small 
-probability, I can’t reproduce.
-qemu wait semaphore from libvirt send migrate continue, however libvirt wait 
-semaphore from qemu send vm pause.
-
-follow stack:
-qemu:
-Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
-#0  0x00007f504b84d670 in sem_wait () from /lib/x86_64-linux-gnu/libpthread.so.0
-#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0) at 
-qemu-2.12/util/qemu-thread-posix.c:322
-#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50, 
-current_active_state=0x7f50445f2ae4, new_state=10)
-    at qemu-2.12/migration/migration.c:2106
-#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at 
-qemu-2.12/migration/migration.c:2137
-#4  migration_iteration_run (s=0x5574ef692f50) at 
-qemu-2.12/migration/migration.c:2311
-#5  migration_thread (opaque=0x5574ef692f50) 
-atqemu-2.12/migration/migration.c:2415
-#6  0x00007f504b847184 in start_thread () from 
-/lib/x86_64-linux-gnu/libpthread.so.0
-#7  0x00007f504b574bed in clone () from /lib/x86_64-linux-gnu/libc.so.6
-
-libvirt:
-Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
-#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from 
-/lib/x86_64-linux-gnu/libpthread.so.0
-#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000, m=0x7fdbc4002f30) at 
-../../../src/util/virthread.c:252
-#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at 
-../../../src/conf/domain_conf.c:3303
-#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0, 
-vm=0x7fdbc4002f20, persist_xml=0x0,
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss 
-</hostname>\n  
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-flags=777,
-    resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0, 
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990, 
-migParams=0x7fdb82ffc900)
-    at ../../../src/qemu/qemu_migration.c:3937
-#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0, 
-vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0 
-"tcp://172.16.202.17:49152",
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
- <hos---Type <return> to continue, or q <return> to quit---
-tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-flags=777,
-    resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0, 
-migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
-    at ../../../src/qemu/qemu_migration.c:4118
-#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0, 
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
-    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0, 
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990, 
-migParams=0x7fdb82ffc900,
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
- <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-flags=777,
-    resource=0) at ../../../src/qemu/qemu_migration.c:5030
-#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0, 
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0, 
-dconnuri=0x0,
-    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0, 
-listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0, 
-compression=0x7fdb78007990,
-    migParams=0x7fdb82ffc900,
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
- <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-flags=777,
-    dname=0x0, resource=0, v3proto=true) at 
-../../../src/qemu/qemu_migration.c:5124
-#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00, 
-xmlin=0x0,
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
- <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-dconnuri=0x0,
-    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0, 
-resource=0) at ../../../src/qemu/qemu_driver.c:12996
-#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00, 
-xmlin=0x0,
-    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
- <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
-dconnuri=0x0,
-    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0, 
-bandwidth=0) at ../../../src/libvirt-domain.c:4698
-#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3 
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620, 
-rerr=0x7fdb82ffcbc0,
-    args=0x7fdb7800b220, ret=0x7fdb78021e90) at ../../../daemon/remote.c:4528
-#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper 
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620, 
-rerr=0x7fdb82ffcbc0,
-    args=0x7fdb7800b220, ret=0x7fdb78021e90) at 
-../../../daemon/remote_dispatch.h:7944
-#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall (prog=0x55d13af98b50, 
-server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
-    at ../../../src/rpc/virnetserverprogram.c:436
-#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50, 
-server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
-    at ../../../src/rpc/virnetserverprogram.c:307
-#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60, 
-client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
-    at ../../../src/rpc/virnetserver.c:148
--------------------------------------------------------------------------------------------------------------------------------------
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
-邮件！
-This e-mail and its attachments contain confidential information from New H3C, 
-which is
-intended only for the person or entity whose address is listed above. Any use 
-of the
-information contained herein in any way (including, but not limited to, total 
-or partial
-disclosure, reproduction, or dissemination) by persons other than the intended
-recipient(s) is prohibited. If you receive this e-mail in error, please notify 
-the sender
-by phone or email immediately and delete it!
-
-* Yuchen (address@hidden) wrote:
->
-Sometimes, living migrate vm pause forever, migrate job stop, but very small
->
-probability, I can’t reproduce.
->
-qemu wait semaphore from libvirt send migrate continue, however libvirt wait
->
-semaphore from qemu send vm pause.
-Hi,
-  I've copied in Jiri Denemark from libvirt.
-Can you confirm exactly which qemu and libvirt versions you're using
-please.
-
->
-follow stack:
->
-qemu:
->
-Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
->
-#0  0x00007f504b84d670 in sem_wait () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0) at
->
-qemu-2.12/util/qemu-thread-posix.c:322
->
-#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50,
->
-current_active_state=0x7f50445f2ae4, new_state=10)
->
-at qemu-2.12/migration/migration.c:2106
->
-#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at
->
-qemu-2.12/migration/migration.c:2137
->
-#4  migration_iteration_run (s=0x5574ef692f50) at
->
-qemu-2.12/migration/migration.c:2311
->
-#5  migration_thread (opaque=0x5574ef692f50)
->
-atqemu-2.12/migration/migration.c:2415
->
-#6  0x00007f504b847184 in start_thread () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#7  0x00007f504b574bed in clone () from /lib/x86_64-linux-gnu/libc.so.6
-In migration_maybe_pause we have:
-
-    migrate_set_state(&s->state, *current_active_state,
-                      MIGRATION_STATUS_PRE_SWITCHOVER);
-    qemu_sem_wait(&s->pause_sem);
-    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
-                      new_state);
-
-the line numbers don't match my 2.12.0 checkout; so I guess that it's
-that qemu_sem_wait it's stuck at.
-
-QEMU must have sent the switch to PRE_SWITCHOVER and that should have
-sent an event to libvirt, and libvirt should notice that - I'm
-not sure how to tell whether libvirt has seen that event yet or not?
-
-Dave
-
->
-libvirt:
->
-Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
->
-#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000, m=0x7fdbc4002f30) at
->
-../../../src/util/virthread.c:252
->
-#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at
->
-../../../src/conf/domain_conf.c:3303
->
-#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0,
->
-vm=0x7fdbc4002f20, persist_xml=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss
->
-</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0,
->
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900)
->
-at ../../../src/qemu/qemu_migration.c:3937
->
-#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0,
->
-vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0
->
-"tcp://172.16.202.17:49152",
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n  <hos---Type <return> to continue, or q <return>
->
-to quit---
->
-tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0,
->
-migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
->
-at ../../../src/qemu/qemu_migration.c:4118
->
-#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0,
->
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
->
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-resource=0) at ../../../src/qemu/qemu_migration.c:5030
->
-#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0,
->
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
->
-listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0,
->
-compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-dname=0x0, resource=0, v3proto=true) at
->
-../../../src/qemu/qemu_migration.c:5124
->
-#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00,
->
-xmlin=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0,
->
-resource=0) at ../../../src/qemu/qemu_driver.c:12996
->
-#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00,
->
-xmlin=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0,
->
-bandwidth=0) at ../../../src/libvirt-domain.c:4698
->
-#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3
->
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
->
-rerr=0x7fdb82ffcbc0,
->
-args=0x7fdb7800b220, ret=0x7fdb78021e90) at ../../../daemon/remote.c:4528
->
-#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper
->
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
->
-rerr=0x7fdb82ffcbc0,
->
-args=0x7fdb7800b220, ret=0x7fdb78021e90) at
->
-../../../daemon/remote_dispatch.h:7944
->
-#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall
->
-(prog=0x55d13af98b50, server=0x55d13af90e60, client=0x55d13b0156f0,
->
-msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserverprogram.c:436
->
-#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50,
->
-server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserverprogram.c:307
->
-#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60,
->
-client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserver.c:148
->
--------------------------------------------------------------------------------------------------------------------------------------
->
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
->
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
->
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
->
-邮件！
->
-This e-mail and its attachments contain confidential information from New
->
-H3C, which is
->
-intended only for the person or entity whose address is listed above. Any use
->
-of the
->
-information contained herein in any way (including, but not limited to, total
->
-or partial
->
-disclosure, reproduction, or dissemination) by persons other than the intended
->
-recipient(s) is prohibited. If you receive this e-mail in error, please
->
-notify the sender
->
-by phone or email immediately and delete it!
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-In migration_maybe_pause we have:
-
-    migrate_set_state(&s->state, *current_active_state,
-                      MIGRATION_STATUS_PRE_SWITCHOVER);
-    qemu_sem_wait(&s->pause_sem);
-    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
-                      new_state);
-
-the line numbers don't match my 2.12.0 checkout; so I guess that it's that 
-qemu_sem_wait it's stuck at.
-
-QEMU must have sent the switch to PRE_SWITCHOVER and that should have sent an 
-event to libvirt, and libvirt should notice that - I'm not sure how to tell 
-whether libvirt has seen that event yet or not?
-
-
-Thank you for your attention. 
-Yes, you are right, QEMU wait semaphore in this place.
-I use qemu-2.12.1, libvirt-4.0.0.
-Because I added some debug code, so the line numbers doesn't match open qemu
-
------邮件原件-----
-发件人: Dr. David Alan Gilbert [
-mailto:address@hidden
-] 
-发送时间: 2019年8月21日 19:13
-收件人: yuchen (Cloud) <address@hidden>; address@hidden
-抄送: address@hidden
-主题: Re: [Qemu-devel] [BUG] living migrate vm pause forever
-
-* Yuchen (address@hidden) wrote:
->
-Sometimes, living migrate vm pause forever, migrate job stop, but very small
->
-probability, I can’t reproduce.
->
-qemu wait semaphore from libvirt send migrate continue, however libvirt wait
->
-semaphore from qemu send vm pause.
-Hi,
-  I've copied in Jiri Denemark from libvirt.
-Can you confirm exactly which qemu and libvirt versions you're using please.
-
->
-follow stack:
->
-qemu:
->
-Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
->
-#0  0x00007f504b84d670 in sem_wait () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0)
->
-at qemu-2.12/util/qemu-thread-posix.c:322
->
-#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50,
->
-current_active_state=0x7f50445f2ae4, new_state=10)
->
-at qemu-2.12/migration/migration.c:2106
->
-#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at
->
-qemu-2.12/migration/migration.c:2137
->
-#4  migration_iteration_run (s=0x5574ef692f50) at
->
-qemu-2.12/migration/migration.c:2311
->
-#5  migration_thread (opaque=0x5574ef692f50)
->
-atqemu-2.12/migration/migration.c:2415
->
-#6  0x00007f504b847184 in start_thread () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#7  0x00007f504b574bed in clone () from
->
-/lib/x86_64-linux-gnu/libc.so.6
-In migration_maybe_pause we have:
-
-    migrate_set_state(&s->state, *current_active_state,
-                      MIGRATION_STATUS_PRE_SWITCHOVER);
-    qemu_sem_wait(&s->pause_sem);
-    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
-                      new_state);
-
-the line numbers don't match my 2.12.0 checkout; so I guess that it's that 
-qemu_sem_wait it's stuck at.
-
-QEMU must have sent the switch to PRE_SWITCHOVER and that should have sent an 
-event to libvirt, and libvirt should notice that - I'm not sure how to tell 
-whether libvirt has seen that event yet or not?
-
-Dave
-
->
-libvirt:
->
-Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
->
-#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from
->
-/lib/x86_64-linux-gnu/libpthread.so.0
->
-#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000,
->
-m=0x7fdbc4002f30) at ../../../src/util/virthread.c:252
->
-#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at
->
-../../../src/conf/domain_conf.c:3303
->
-#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0,
->
-vm=0x7fdbc4002f20, persist_xml=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss
->
-</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0,
->
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900)
->
-at ../../../src/qemu/qemu_migration.c:3937
->
-#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0,
->
-vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0
->
-"tcp://172.16.202.17:49152",
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n
->
-<name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n  <hos---Type <return> to continue, or q
->
-<return> to quit---
->
-tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..
->
-tuuid>., cookieinlen=207, cookieout=0x7fdb82ffcad0,
->
-tuuid>cookieoutlen=0x7fdb82ffcac8, flags=777,
->
-resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0,
->
-migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
->
-at ../../../src/qemu/qemu_migration.c:4118
->
-#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0,
->
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
->
-nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-resource=0) at ../../../src/qemu/qemu_migration.c:5030
->
-#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0,
->
-conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
->
-listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0,
->
-compression=0x7fdb78007990,
->
-migParams=0x7fdb82ffc900,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-flags=777,
->
-dname=0x0, resource=0, v3proto=true) at
->
-../../../src/qemu/qemu_migration.c:5124
->
-#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00,
->
-xmlin=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777,
->
-dname=0x0, resource=0) at ../../../src/qemu/qemu_driver.c:12996
->
-#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00,
->
-xmlin=0x0,
->
-cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
->
-<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
->
-<hostname>mss</hostname>\n
->
-<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
->
-cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
->
-dconnuri=0x0,
->
-uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777,
->
-dname=0x0, bandwidth=0) at ../../../src/libvirt-domain.c:4698
->
-#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3
->
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
->
-rerr=0x7fdb82ffcbc0,
->
-args=0x7fdb7800b220, ret=0x7fdb78021e90) at
->
-../../../daemon/remote.c:4528
->
-#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper
->
-(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
->
-rerr=0x7fdb82ffcbc0,
->
-args=0x7fdb7800b220, ret=0x7fdb78021e90) at
->
-../../../daemon/remote_dispatch.h:7944
->
-#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall
->
-(prog=0x55d13af98b50, server=0x55d13af90e60, client=0x55d13b0156f0,
->
-msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserverprogram.c:436
->
-#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50,
->
-server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserverprogram.c:307
->
-#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60,
->
-client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
->
-at ../../../src/rpc/virnetserver.c:148
->
-----------------------------------------------------------------------
->
----------------------------------------------------------------
->
-本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
->
-的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
->
-或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
->
-邮件！
->
-This e-mail and its attachments contain confidential information from
->
-New H3C, which is intended only for the person or entity whose address
->
-is listed above. Any use of the information contained herein in any
->
-way (including, but not limited to, total or partial disclosure,
->
-reproduction, or dissemination) by persons other than the intended
->
-recipient(s) is prohibited. If you receive this e-mail in error,
->
-please notify the sender by phone or email immediately and delete it!
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
diff --git a/results/classifier/005/other/21221931 b/results/classifier/005/other/21221931
deleted file mode 100644
index ed9cdbd7..00000000
--- a/results/classifier/005/other/21221931
+++ /dev/null
@@ -1,336 +0,0 @@
-other: 0.979
-network: 0.976
-instruction: 0.974
-device: 0.971
-semantic: 0.967
-assembly: 0.963
-socket: 0.957
-graphic: 0.948
-boot: 0.947
-vnc: 0.944
-mistranslation: 0.933
-KVM: 0.913
-
-[BUG] qemu git error with virgl
-
-Hello,
-
-i can't start any system if i use virgl. I get the following error:
-qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
-`con->gl' failed.
-./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
--smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
-virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
-intel-hda,id=sound0,msi=on -device
-hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
--device usb-tablet,bus=xhci.0 -net
-nic,macaddr=52:54:00:12:34:62,model=e1000 -net
-tap,ifname=$INTERFACE,script=no,downscript=no -drive
-file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
-Set 'tap3' nonpersistent
-
-i have bicected the issue:
-
-towo:Defiant> git bisect good
-b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
-commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
-Author: Paolo Bonzini <pbonzini@redhat.com>
-Date:   Tue Oct 27 08:44:23 2020 -0400
-
-    vl: remove separate preconfig main_loop
-    Move post-preconfig initialization to the x-exit-preconfig. If
-preconfig
-    is not requested, just exit preconfig mode immediately with the QMP
-    command.
-
-    As a result, the preconfig loop will run with accel_setup_post
-    and os_setup_post restrictions (xen_restrict, chroot, etc.)
-    already done.
-
-    Reviewed-by: Igor Mammedov <imammedo@redhat.com>
-    Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- include/sysemu/runstate.h |  1 -
- monitor/qmp-cmds.c        |  9 -----
- softmmu/vl.c              | 95
-++++++++++++++++++++---------------------------
- 3 files changed, 41 insertions(+), 64 deletions(-)
-
-Regards,
-
-Torsten Wohlfarth
-
-Cc'ing Gerd + patch author/reviewer.
-
-On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
->
-Hello,
->
->
-i can't start any system if i use virgl. I get the following error:
->
->
-qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
->
-`con->gl' failed.
->
-./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
->
--smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
->
-virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
->
-intel-hda,id=sound0,msi=on -device
->
-hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
->
--device usb-tablet,bus=xhci.0 -net
->
-nic,macaddr=52:54:00:12:34:62,model=e1000 -net
->
-tap,ifname=$INTERFACE,script=no,downscript=no -drive
->
-file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
->
->
-Set 'tap3' nonpersistent
->
->
-i have bicected the issue:
->
->
-towo:Defiant> git bisect good
->
-b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
->
-commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
->
-Author: Paolo Bonzini <pbonzini@redhat.com>
->
-Date:   Tue Oct 27 08:44:23 2020 -0400
->
->
-    vl: remove separate preconfig main_loop
->
->
-    Move post-preconfig initialization to the x-exit-preconfig. If
->
-preconfig
->
-    is not requested, just exit preconfig mode immediately with the QMP
->
-    command.
->
->
-    As a result, the preconfig loop will run with accel_setup_post
->
-    and os_setup_post restrictions (xen_restrict, chroot, etc.)
->
-    already done.
->
->
-    Reviewed-by: Igor Mammedov <imammedo@redhat.com>
->
-    Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
->
->
- include/sysemu/runstate.h |  1 -
->
- monitor/qmp-cmds.c        |  9 -----
->
- softmmu/vl.c              | 95
->
-++++++++++++++++++++---------------------------
->
- 3 files changed, 41 insertions(+), 64 deletions(-)
->
->
-Regards,
->
->
-Torsten Wohlfarth
->
->
->
-
-On Sun, 3 Jan 2021 18:28:11 +0100
-Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
-
->
-Cc'ing Gerd + patch author/reviewer.
->
->
-On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
->
-> Hello,
->
->
->
-> i can't start any system if i use virgl. I get the following error:
->
->
->
-> qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
->
-> `con->gl' failed.
-Does following fix issue:
-  [PULL 12/55] vl: initialize displays _after_ exiting preconfiguration
-
->
-> ./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
->
-> -smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
->
-> virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
->
-> intel-hda,id=sound0,msi=on -device
->
-> hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
->
-> -device usb-tablet,bus=xhci.0 -net
->
-> nic,macaddr=52:54:00:12:34:62,model=e1000 -net
->
-> tap,ifname=$INTERFACE,script=no,downscript=no -drive
->
-> file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
->
->
->
-> Set 'tap3' nonpersistent
->
->
->
-> i have bicected the issue:
->
->
->
-> towo:Defiant> git bisect good
->
-> b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
->
-> commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
->
-> Author: Paolo Bonzini <pbonzini@redhat.com>
->
-> Date:   Tue Oct 27 08:44:23 2020 -0400
->
->
->
->     vl: remove separate preconfig main_loop
->
->
->
->     Move post-preconfig initialization to the x-exit-preconfig. If
->
-> preconfig
->
->     is not requested, just exit preconfig mode immediately with the QMP
->
->     command.
->
->
->
->     As a result, the preconfig loop will run with accel_setup_post
->
->     and os_setup_post restrictions (xen_restrict, chroot, etc.)
->
->     already done.
->
->
->
->     Reviewed-by: Igor Mammedov <imammedo@redhat.com>
->
->     Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
->
->
->
->  include/sysemu/runstate.h |  1 -
->
->  monitor/qmp-cmds.c        |  9 -----
->
->  softmmu/vl.c              | 95
->
-> ++++++++++++++++++++---------------------------
->
->  3 files changed, 41 insertions(+), 64 deletions(-)
->
->
->
-> Regards,
->
->
->
-> Torsten Wohlfarth
->
->
->
->
->
->
->
->
-
-Hi Igor,
-
-yes, that fixes my issue.
-
-Regards, Torsten
-
-Am 04.01.21 um 19:50 schrieb Igor Mammedov:
-On Sun, 3 Jan 2021 18:28:11 +0100
-Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
-Cc'ing Gerd + patch author/reviewer.
-
-On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
-Hello,
-
-i can't start any system if i use virgl. I get the following error:
-
-qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
-`con->gl' failed.
-Does following fix issue:
-   [PULL 12/55] vl: initialize displays _after_ exiting preconfiguration
-./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
--smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
-virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
-intel-hda,id=sound0,msi=on -device
-hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
--device usb-tablet,bus=xhci.0 -net
-nic,macaddr=52:54:00:12:34:62,model=e1000 -net
-tap,ifname=$INTERFACE,script=no,downscript=no -drive
-file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
-
-Set 'tap3' nonpersistent
-
-i have bicected the issue:
-towo:Defiant> git bisect good
-b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
-commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
-Author: Paolo Bonzini <pbonzini@redhat.com>
-Date:   Tue Oct 27 08:44:23 2020 -0400
-
-     vl: remove separate preconfig main_loop
-
-     Move post-preconfig initialization to the x-exit-preconfig. If
-preconfig
-     is not requested, just exit preconfig mode immediately with the QMP
-     command.
-
-     As a result, the preconfig loop will run with accel_setup_post
-     and os_setup_post restrictions (xen_restrict, chroot, etc.)
-     already done.
-
-     Reviewed-by: Igor Mammedov <imammedo@redhat.com>
-     Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
-  include/sysemu/runstate.h |  1 -
-  monitor/qmp-cmds.c        |  9 -----
-  softmmu/vl.c              | 95
-++++++++++++++++++++---------------------------
-  3 files changed, 41 insertions(+), 64 deletions(-)
-
-Regards,
-
-Torsten Wohlfarth
-
diff --git a/results/classifier/005/other/21247035 b/results/classifier/005/other/21247035
deleted file mode 100644
index 080554a9..00000000
--- a/results/classifier/005/other/21247035
+++ /dev/null
@@ -1,1329 +0,0 @@
-other: 0.640
-mistranslation: 0.584
-device: 0.525
-KVM: 0.514
-instruction: 0.508
-graphic: 0.426
-assembly: 0.391
-semantic: 0.374
-vnc: 0.367
-boot: 0.345
-network: 0.322
-socket: 0.322
-
-[Qemu-devel] [BUG] I/O thread segfault for QEMU on s390x
-
-Hi,
-I have been noticing some segfaults for QEMU on s390x, and I have been
-hitting this issue quite reliably (at least once in 10 runs of a test
-case). The qemu version is 2.11.50, and I have systemd created coredumps
-when this happens.
-
-Here is a back trace of the segfaulting thread:
-
-
-#0  0x000003ffafed202c in swapcontext () from /lib64/libc.so.6
-#1  0x000002aa355c02ee in qemu_coroutine_new () at
-util/coroutine-ucontext.c:164
-#2  0x000002aa355bec34 in qemu_coroutine_create
-(address@hidden <blk_aio_read_entry>,
-address@hidden) at util/qemu-coroutine.c:76
-#3  0x000002aa35510262 in blk_aio_prwv (blk=0x2aa65fbefa0,
-offset=<optimized out>, bytes=<optimized out>, qiov=0x3ffa002a9c0,
-address@hidden <blk_aio_read_entry>, flags=0,
-cb=0x2aa35340a50 <virtio_blk_rw_complete>, opaque=0x3ffa002a960) at
-block/block-backend.c:1299
-#4  0x000002aa35510376 in blk_aio_preadv (blk=<optimized out>,
-offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
-cb=<optimized out>, opaque=0x3ffa002a960) at block/block-backend.c:1392
-#5  0x000002aa3534114e in submit_requests (niov=<optimized out>,
-num_reqs=<optimized out>, start=<optimized out>, mrb=<optimized out>,
-blk=<optimized out>) at
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:372
-#6  virtio_blk_submit_multireq (blk=<optimized out>,
-address@hidden) at
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:402
-#7  0x000002aa353422e0 in virtio_blk_handle_vq (s=0x2aa6611e7d8,
-vq=0x3ffb0f5f010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
-#8  0x000002aa3536655a in virtio_queue_notify_aio_vq
-(address@hidden) at
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
-#9  0x000002aa35366cd6 in virtio_queue_notify_aio_vq (vq=0x3ffb0f5f010)
-at /usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1511
-#10 virtio_queue_host_notifier_aio_poll (opaque=0x3ffb0f5f078) at
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:2409
-#11 0x000002aa355a8ba4 in run_poll_handlers_once
-(address@hidden) at util/aio-posix.c:497
-#12 0x000002aa355a9b74 in run_poll_handlers (max_ns=<optimized out>,
-ctx=0x2aa65f99310) at util/aio-posix.c:534
-#13 try_poll_mode (blocking=true, ctx=0x2aa65f99310) at util/aio-posix.c:562
-#14 aio_poll (ctx=0x2aa65f99310, address@hidden) at
-util/aio-posix.c:602
-#15 0x000002aa353d2d0a in iothread_run (opaque=0x2aa65f990f0) at
-iothread.c:60
-#16 0x000003ffb0f07e82 in start_thread () from /lib64/libpthread.so.0
-#17 0x000003ffaff91596 in thread_start () from /lib64/libc.so.6
-I don't have much knowledge about i/o threads and the block layer code
-in QEMU, so I would like to report to the community about this issue.
-I believe this very similar to the bug that I reported upstream couple
-of days ago
-(
-https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg04452.html
-).
-Any help would be greatly appreciated.
-
-Thanks
-Farhan
-
-On Thu, Mar 1, 2018 at 10:33 PM, Farhan Ali <address@hidden> wrote:
->
-Hi,
->
->
-I have been noticing some segfaults for QEMU on s390x, and I have been
->
-hitting this issue quite reliably (at least once in 10 runs of a test case).
->
-The qemu version is 2.11.50, and I have systemd created coredumps
->
-when this happens.
-Can you describe the test case or suggest how to reproduce it for us?
-
-Fam
-
-On 03/02/2018 01:13 AM, Fam Zheng wrote:
-On Thu, Mar 1, 2018 at 10:33 PM, Farhan Ali <address@hidden> wrote:
-Hi,
-
-I have been noticing some segfaults for QEMU on s390x, and I have been
-hitting this issue quite reliably (at least once in 10 runs of a test case).
-The qemu version is 2.11.50, and I have systemd created coredumps
-when this happens.
-Can you describe the test case or suggest how to reproduce it for us?
-
-Fam
-The test case is with a single guest, running a memory intensive
-workload. The guest has 8 vpcus and 4G of memory.
-Here is the qemu command line, if that helps:
-
-/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
--S -object
-secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
-\
--machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
--m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
--object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
-b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
--display none -no-user-config -nodefaults -chardev
-socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
--mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
--no-shutdown \
--boot strict=on -drive
-file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
--device
-virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
--drive
-file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
--device
-virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
--netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
-virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
--chardev pty,id=charconsole0 -device
-sclpconsole,chardev=charconsole0,id=console0 -device
-virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
-Please let me know if I need to provide any other information.
-
-Thanks
-Farhan
-
-On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
->
-Hi,
->
->
-I have been noticing some segfaults for QEMU on s390x, and I have been
->
-hitting this issue quite reliably (at least once in 10 runs of a test case).
->
-The qemu version is 2.11.50, and I have systemd created coredumps
->
-when this happens.
->
->
-Here is a back trace of the segfaulting thread:
-The backtrace looks normal.
-
-Please post the QEMU command-line and the details of the segfault (which
-memory access faulted?).
-
->
-#0  0x000003ffafed202c in swapcontext () from /lib64/libc.so.6
->
-#1  0x000002aa355c02ee in qemu_coroutine_new () at
->
-util/coroutine-ucontext.c:164
->
-#2  0x000002aa355bec34 in qemu_coroutine_create
->
-(address@hidden <blk_aio_read_entry>,
->
-address@hidden) at util/qemu-coroutine.c:76
->
-#3  0x000002aa35510262 in blk_aio_prwv (blk=0x2aa65fbefa0, offset=<optimized
->
-out>, bytes=<optimized out>, qiov=0x3ffa002a9c0,
->
-address@hidden <blk_aio_read_entry>, flags=0,
->
-cb=0x2aa35340a50 <virtio_blk_rw_complete>, opaque=0x3ffa002a960) at
->
-block/block-backend.c:1299
->
-#4  0x000002aa35510376 in blk_aio_preadv (blk=<optimized out>,
->
-offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
->
-cb=<optimized out>, opaque=0x3ffa002a960) at block/block-backend.c:1392
->
-#5  0x000002aa3534114e in submit_requests (niov=<optimized out>,
->
-num_reqs=<optimized out>, start=<optimized out>, mrb=<optimized out>,
->
-blk=<optimized out>) at
->
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:372
->
-#6  virtio_blk_submit_multireq (blk=<optimized out>,
->
-address@hidden) at
->
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:402
->
-#7  0x000002aa353422e0 in virtio_blk_handle_vq (s=0x2aa6611e7d8,
->
-vq=0x3ffb0f5f010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
->
-#8  0x000002aa3536655a in virtio_queue_notify_aio_vq
->
-(address@hidden) at
->
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
->
-#9  0x000002aa35366cd6 in virtio_queue_notify_aio_vq (vq=0x3ffb0f5f010) at
->
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1511
->
-#10 virtio_queue_host_notifier_aio_poll (opaque=0x3ffb0f5f078) at
->
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:2409
->
-#11 0x000002aa355a8ba4 in run_poll_handlers_once
->
-(address@hidden) at util/aio-posix.c:497
->
-#12 0x000002aa355a9b74 in run_poll_handlers (max_ns=<optimized out>,
->
-ctx=0x2aa65f99310) at util/aio-posix.c:534
->
-#13 try_poll_mode (blocking=true, ctx=0x2aa65f99310) at util/aio-posix.c:562
->
-#14 aio_poll (ctx=0x2aa65f99310, address@hidden) at
->
-util/aio-posix.c:602
->
-#15 0x000002aa353d2d0a in iothread_run (opaque=0x2aa65f990f0) at
->
-iothread.c:60
->
-#16 0x000003ffb0f07e82 in start_thread () from /lib64/libpthread.so.0
->
-#17 0x000003ffaff91596 in thread_start () from /lib64/libc.so.6
->
->
->
-I don't have much knowledge about i/o threads and the block layer code in
->
-QEMU, so I would like to report to the community about this issue.
->
-I believe this very similar to the bug that I reported upstream couple of
->
-days ago
->
-(
-https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg04452.html
-).
->
->
-Any help would be greatly appreciated.
->
->
-Thanks
->
-Farhan
->
-signature.asc
-Description:
-PGP signature
-
-On 03/02/2018 04:23 AM, Stefan Hajnoczi wrote:
-On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
-Hi,
-
-I have been noticing some segfaults for QEMU on s390x, and I have been
-hitting this issue quite reliably (at least once in 10 runs of a test case).
-The qemu version is 2.11.50, and I have systemd created coredumps
-when this happens.
-
-Here is a back trace of the segfaulting thread:
-The backtrace looks normal.
-
-Please post the QEMU command-line and the details of the segfault (which
-memory access faulted?).
-I was able to create another crash today and here is the qemu comand line
-
-/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
--S -object
-secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
-\
--machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
--m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
--object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
-b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
--display none -no-user-config -nodefaults -chardev
-socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
--mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
--no-shutdown \
--boot strict=on -drive
-file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
--device
-virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
--drive
-file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
--device
-virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
--netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
-virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
--chardev pty,id=charconsole0 -device
-sclpconsole,chardev=charconsole0,id=console0 -device
-virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
-This the latest back trace on the segfaulting thread, and it seems to
-segfault in swapcontext.
-Program terminated with signal SIGSEGV, Segmentation fault.
-#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
-
-
-This is the remaining back trace:
-
-#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
-#1  0x000002aa33b45566 in qemu_coroutine_new () at
-util/coroutine-ucontext.c:164
-#2  0x000002aa33b43eac in qemu_coroutine_create
-(address@hidden <blk_aio_write_entry>,
-address@hidden) at util/qemu-coroutine.c:76
-#3  0x000002aa33a954da in blk_aio_prwv (blk=0x2aa4f0efda0,
-offset=<optimized out>, bytes=<optimized out>, qiov=0x3ff74019080,
-address@hidden <blk_aio_write_entry>, flags=0,
-cb=0x2aa338c62e8 <virtio_blk_rw_complete>, opaque=0x3ff74019020) at
-block/block-backend.c:1299
-#4  0x000002aa33a9563e in blk_aio_pwritev (blk=<optimized out>,
-offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
-cb=<optimized out>, opaque=0x3ff74019020) at block/block-backend.c:1400
-#5  0x000002aa338c6a38 in submit_requests (niov=<optimized out>,
-num_reqs=1, start=<optimized out>, mrb=0x3ff831fe6e0, blk=<optimized
-out>) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:369
-#6  virtio_blk_submit_multireq (blk=<optimized out>,
-address@hidden) at
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:426
-#7  0x000002aa338c7b78 in virtio_blk_handle_vq (s=0x2aa4f2507c8,
-vq=0x3ff869df010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
-#8  0x000002aa338ebdf2 in virtio_queue_notify_aio_vq (vq=0x3ff869df010)
-at /usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
-#9  0x000002aa33b2df46 in aio_dispatch_handlers
-(address@hidden) at util/aio-posix.c:406
-#10 0x000002aa33b2eb50 in aio_poll (ctx=0x2aa4f0ca050,
-address@hidden) at util/aio-posix.c:692
-#11 0x000002aa33957f6a in iothread_run (opaque=0x2aa4f0c9630) at
-iothread.c:60
-#12 0x000003ff86987e82 in start_thread () from /lib64/libpthread.so.0
-#13 0x000003ff85a11596 in thread_start () from /lib64/libc.so.6
-Backtrace stopped: previous frame identical to this frame (corrupt stack?)
-
-On Fri, Mar 02, 2018 at 10:30:57AM -0500, Farhan Ali wrote:
->
->
->
-On 03/02/2018 04:23 AM, Stefan Hajnoczi wrote:
->
-> On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
->
-> > Hi,
->
-> >
->
-> > I have been noticing some segfaults for QEMU on s390x, and I have been
->
-> > hitting this issue quite reliably (at least once in 10 runs of a test
->
-> > case).
->
-> > The qemu version is 2.11.50, and I have systemd created coredumps
->
-> > when this happens.
->
-> >
->
-> > Here is a back trace of the segfaulting thread:
->
-> The backtrace looks normal.
->
->
->
-> Please post the QEMU command-line and the details of the segfault (which
->
-> memory access faulted?).
->
->
->
->
->
-I was able to create another crash today and here is the qemu comand line
->
->
-/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
->
--S -object
->
-secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
->
-\
->
--machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
->
--m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
->
--object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
->
-b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
->
--display none -no-user-config -nodefaults -chardev
->
-socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
->
->
--mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
->
-\
->
--boot strict=on -drive
->
-file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
->
--device
->
-virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
->
--drive
->
-file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
->
--device
->
-virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
->
--netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
->
-virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
->
--chardev pty,id=charconsole0 -device
->
-sclpconsole,chardev=charconsole0,id=console0 -device
->
-virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
->
->
->
-This the latest back trace on the segfaulting thread, and it seems to
->
-segfault in swapcontext.
->
->
-Program terminated with signal SIGSEGV, Segmentation fault.
->
-#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
-Please include the following gdb output:
-
-  (gdb) disas swapcontext
-  (gdb) i r
-
-That way it's possible to see which instruction faulted and which
-registers were being accessed.
-
->
-This is the remaining back trace:
->
->
-#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
->
-#1  0x000002aa33b45566 in qemu_coroutine_new () at
->
-util/coroutine-ucontext.c:164
->
-#2  0x000002aa33b43eac in qemu_coroutine_create
->
-(address@hidden <blk_aio_write_entry>,
->
-address@hidden) at util/qemu-coroutine.c:76
->
-#3  0x000002aa33a954da in blk_aio_prwv (blk=0x2aa4f0efda0, offset=<optimized
->
-out>, bytes=<optimized out>, qiov=0x3ff74019080,
->
-address@hidden <blk_aio_write_entry>, flags=0,
->
-cb=0x2aa338c62e8 <virtio_blk_rw_complete>, opaque=0x3ff74019020) at
->
-block/block-backend.c:1299
->
-#4  0x000002aa33a9563e in blk_aio_pwritev (blk=<optimized out>,
->
-offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
->
-cb=<optimized out>, opaque=0x3ff74019020) at block/block-backend.c:1400
->
-#5  0x000002aa338c6a38 in submit_requests (niov=<optimized out>, num_reqs=1,
->
-start=<optimized out>, mrb=0x3ff831fe6e0, blk=<optimized out>) at
->
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:369
->
-#6  virtio_blk_submit_multireq (blk=<optimized out>,
->
-address@hidden) at
->
-/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:426
->
-#7  0x000002aa338c7b78 in virtio_blk_handle_vq (s=0x2aa4f2507c8,
->
-vq=0x3ff869df010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
->
-#8  0x000002aa338ebdf2 in virtio_queue_notify_aio_vq (vq=0x3ff869df010) at
->
-/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
->
-#9  0x000002aa33b2df46 in aio_dispatch_handlers
->
-(address@hidden) at util/aio-posix.c:406
->
-#10 0x000002aa33b2eb50 in aio_poll (ctx=0x2aa4f0ca050,
->
-address@hidden) at util/aio-posix.c:692
->
-#11 0x000002aa33957f6a in iothread_run (opaque=0x2aa4f0c9630) at
->
-iothread.c:60
->
-#12 0x000003ff86987e82 in start_thread () from /lib64/libpthread.so.0
->
-#13 0x000003ff85a11596 in thread_start () from /lib64/libc.so.6
->
-Backtrace stopped: previous frame identical to this frame (corrupt stack?)
->
-signature.asc
-Description:
-PGP signature
-
-On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
-Please include the following gdb output:
-
-   (gdb) disas swapcontext
-   (gdb) i r
-
-That way it's possible to see which instruction faulted and which
-registers were being accessed.
-here is the disas out for swapcontext, this is on a coredump with
-debugging symbols enabled for qemu. So the addresses from the previous
-dump is a little different.
-(gdb) disas swapcontext
-Dump of assembler code for function swapcontext:
-   0x000003ff90751fb8 <+0>:       lgr     %r1,%r2
-   0x000003ff90751fbc <+4>:       lgr     %r0,%r3
-   0x000003ff90751fc0 <+8>:       stfpc   248(%r1)
-   0x000003ff90751fc4 <+12>:      std     %f0,256(%r1)
-   0x000003ff90751fc8 <+16>:      std     %f1,264(%r1)
-   0x000003ff90751fcc <+20>:      std     %f2,272(%r1)
-   0x000003ff90751fd0 <+24>:      std     %f3,280(%r1)
-   0x000003ff90751fd4 <+28>:      std     %f4,288(%r1)
-   0x000003ff90751fd8 <+32>:      std     %f5,296(%r1)
-   0x000003ff90751fdc <+36>:      std     %f6,304(%r1)
-   0x000003ff90751fe0 <+40>:      std     %f7,312(%r1)
-   0x000003ff90751fe4 <+44>:      std     %f8,320(%r1)
-   0x000003ff90751fe8 <+48>:      std     %f9,328(%r1)
-   0x000003ff90751fec <+52>:      std     %f10,336(%r1)
-   0x000003ff90751ff0 <+56>:      std     %f11,344(%r1)
-   0x000003ff90751ff4 <+60>:      std     %f12,352(%r1)
-   0x000003ff90751ff8 <+64>:      std     %f13,360(%r1)
-   0x000003ff90751ffc <+68>:      std     %f14,368(%r1)
-   0x000003ff90752000 <+72>:      std     %f15,376(%r1)
-   0x000003ff90752004 <+76>:      slgr    %r2,%r2
-   0x000003ff90752008 <+80>:      stam    %a0,%a15,184(%r1)
-   0x000003ff9075200c <+84>:      stmg    %r0,%r15,56(%r1)
-   0x000003ff90752012 <+90>:      la      %r2,2
-   0x000003ff90752016 <+94>:      lgr     %r5,%r0
-   0x000003ff9075201a <+98>:      la      %r3,384(%r5)
-   0x000003ff9075201e <+102>:     la      %r4,384(%r1)
-   0x000003ff90752022 <+106>:     lghi    %r5,8
-   0x000003ff90752026 <+110>:     svc     175
-   0x000003ff90752028 <+112>:     lgr     %r5,%r0
-=> 0x000003ff9075202c <+116>:  lfpc    248(%r5)
-   0x000003ff90752030 <+120>:     ld      %f0,256(%r5)
-   0x000003ff90752034 <+124>:     ld      %f1,264(%r5)
-   0x000003ff90752038 <+128>:     ld      %f2,272(%r5)
-   0x000003ff9075203c <+132>:     ld      %f3,280(%r5)
-   0x000003ff90752040 <+136>:     ld      %f4,288(%r5)
-   0x000003ff90752044 <+140>:     ld      %f5,296(%r5)
-   0x000003ff90752048 <+144>:     ld      %f6,304(%r5)
-   0x000003ff9075204c <+148>:     ld      %f7,312(%r5)
-   0x000003ff90752050 <+152>:     ld      %f8,320(%r5)
-   0x000003ff90752054 <+156>:     ld      %f9,328(%r5)
-   0x000003ff90752058 <+160>:     ld      %f10,336(%r5)
-   0x000003ff9075205c <+164>:     ld      %f11,344(%r5)
-   0x000003ff90752060 <+168>:     ld      %f12,352(%r5)
-   0x000003ff90752064 <+172>:     ld      %f13,360(%r5)
-   0x000003ff90752068 <+176>:     ld      %f14,368(%r5)
-   0x000003ff9075206c <+180>:     ld      %f15,376(%r5)
-   0x000003ff90752070 <+184>:     lam     %a2,%a15,192(%r5)
-   0x000003ff90752074 <+188>:     lmg     %r0,%r15,56(%r5)
-   0x000003ff9075207a <+194>:     br      %r14
-End of assembler dump.
-
-(gdb) i r
-r0             0x0      0
-r1             0x3ff8fe7de40    4396165881408
-r2             0x0      0
-r3             0x3ff8fe7e1c0    4396165882304
-r4             0x3ff8fe7dfc0    4396165881792
-r5             0x0      0
-r6             0xffffffff88004880       18446744071696304256
-r7             0x3ff880009e0    4396033247712
-r8             0x27ff89000      10736930816
-r9             0x3ff88001460    4396033250400
-r10            0x1000   4096
-r11            0x1261be0        19274720
-r12            0x3ff88001e00    4396033252864
-r13            0x14d0bc0        21826496
-r14            0x1312ac8        19999432
-r15            0x3ff8fe7dc80    4396165880960
-pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
-cc             0x2      2
-
-On 03/05/2018 07:45 PM, Farhan Ali wrote:
->
->
->
-On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
->
-> Please include the following gdb output:
->
->
->
->    (gdb) disas swapcontext
->
->    (gdb) i r
->
->
->
-> That way it's possible to see which instruction faulted and which
->
-> registers were being accessed.
->
->
->
-here is the disas out for swapcontext, this is on a coredump with debugging
->
-symbols enabled for qemu. So the addresses from the previous dump is a little
->
-different.
->
->
->
-(gdb) disas swapcontext
->
-Dump of assembler code for function swapcontext:
->
-   0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
->
-   0x000003ff90751fbc <+4>:    lgr    %r0,%r3
->
-   0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
->
-   0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
->
-   0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
->
-   0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
->
-   0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
->
-   0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
->
-   0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
->
-   0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
->
-   0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
->
-   0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
->
-   0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
->
-   0x000003ff90751fec <+52>:    std    %f10,336(%r1)
->
-   0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
->
-   0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
->
-   0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
->
-   0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
->
-   0x000003ff90752000 <+72>:    std    %f15,376(%r1)
->
-   0x000003ff90752004 <+76>:    slgr    %r2,%r2
->
-   0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
->
-   0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
->
-   0x000003ff90752012 <+90>:    la    %r2,2
->
-   0x000003ff90752016 <+94>:    lgr    %r5,%r0
->
-   0x000003ff9075201a <+98>:    la    %r3,384(%r5)
->
-   0x000003ff9075201e <+102>:    la    %r4,384(%r1)
->
-   0x000003ff90752022 <+106>:    lghi    %r5,8
->
-   0x000003ff90752026 <+110>:    svc    175
-sys_rt_sigprocmask. r0 should not be changed by the system call.
-
->
-   0x000003ff90752028 <+112>:    lgr    %r5,%r0
->
-=> 0x000003ff9075202c <+116>:    lfpc    248(%r5)
-so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the 
-2nd parameter to this
-function). Now this is odd.
-
->
-   0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
->
-   0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
->
-   0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
->
-   0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
->
-   0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
->
-   0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
->
-   0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
->
-   0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
->
-   0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
->
-   0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
->
-   0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
->
-   0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
->
-   0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
->
-   0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
->
-   0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
->
-   0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
->
-   0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
->
-   0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
->
-   0x000003ff9075207a <+194>:    br    %r14
->
-End of assembler dump.
->
->
-(gdb) i r
->
-r0             0x0    0
->
-r1             0x3ff8fe7de40    4396165881408
->
-r2             0x0    0
->
-r3             0x3ff8fe7e1c0    4396165882304
->
-r4             0x3ff8fe7dfc0    4396165881792
->
-r5             0x0    0
->
-r6             0xffffffff88004880    18446744071696304256
->
-r7             0x3ff880009e0    4396033247712
->
-r8             0x27ff89000    10736930816
->
-r9             0x3ff88001460    4396033250400
->
-r10            0x1000    4096
->
-r11            0x1261be0    19274720
->
-r12            0x3ff88001e00    4396033252864
->
-r13            0x14d0bc0    21826496
->
-r14            0x1312ac8    19999432
->
-r15            0x3ff8fe7dc80    4396165880960
->
-pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
->
-cc             0x2    2
-
-On 5 March 2018 at 18:54, Christian Borntraeger <address@hidden> wrote:
->
->
->
-On 03/05/2018 07:45 PM, Farhan Ali wrote:
->
->    0x000003ff90752026 <+110>:    svc    175
->
->
-sys_rt_sigprocmask. r0 should not be changed by the system call.
->
->
->    0x000003ff90752028 <+112>:    lgr    %r5,%r0
->
-> => 0x000003ff9075202c <+116>:    lfpc    248(%r5)
->
->
-so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the
->
-2nd parameter to this
->
-function). Now this is odd.
-...particularly given that the only place we call swapcontext()
-the second parameter is always the address of a local variable
-and can't be 0...
-
-thanks
--- PMM
-
-Do you happen to run with a recent host kernel that has 
-
-commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
-    s390: scrub registers on kernel entry and KVM exit
-
-
-
-
-
-Can you run with this on top
-diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
-index 13a133a6015c..d6dc0e5e8f74 100644
---- a/arch/s390/kernel/entry.S
-+++ b/arch/s390/kernel/entry.S
-@@ -426,13 +426,13 @@ ENTRY(system_call)
-        UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
-        BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
-        stmg    %r0,%r7,__PT_R0(%r11)
--       # clear user controlled register to prevent speculative use
--       xgr     %r0,%r0
-        mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
-        mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
-        mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
-        stg     %r14,__PT_FLAGS(%r11)
- .Lsysc_do_svc:
-+       # clear user controlled register to prevent speculative use
-+       xgr     %r0,%r0
-        # load address of system call table
-        lg      %r10,__THREAD_sysc_table(%r13,%r12)
-        llgh    %r8,__PT_INT_CODE+2(%r11)
-
-
-To me it looks like that the critical section cleanup (interrupt during system 
-call entry) might
-save the registers again into ptregs but we have already zeroed out r0.
-This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
-critical
-section cleanup.
-
-Adding Martin and Heiko. Will spin a patch.
-
-
-On 03/05/2018 07:54 PM, Christian Borntraeger wrote:
->
->
->
-On 03/05/2018 07:45 PM, Farhan Ali wrote:
->
->
->
->
->
-> On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
->
->> Please include the following gdb output:
->
->>
->
->>    (gdb) disas swapcontext
->
->>    (gdb) i r
->
->>
->
->> That way it's possible to see which instruction faulted and which
->
->> registers were being accessed.
->
->
->
->
->
-> here is the disas out for swapcontext, this is on a coredump with debugging
->
-> symbols enabled for qemu. So the addresses from the previous dump is a
->
-> little different.
->
->
->
->
->
-> (gdb) disas swapcontext
->
-> Dump of assembler code for function swapcontext:
->
->    0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
->
->    0x000003ff90751fbc <+4>:    lgr    %r0,%r3
->
->    0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
->
->    0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
->
->    0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
->
->    0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
->
->    0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
->
->    0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
->
->    0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
->
->    0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
->
->    0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
->
->    0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
->
->    0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
->
->    0x000003ff90751fec <+52>:    std    %f10,336(%r1)
->
->    0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
->
->    0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
->
->    0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
->
->    0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
->
->    0x000003ff90752000 <+72>:    std    %f15,376(%r1)
->
->    0x000003ff90752004 <+76>:    slgr    %r2,%r2
->
->    0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
->
->    0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
->
->    0x000003ff90752012 <+90>:    la    %r2,2
->
->    0x000003ff90752016 <+94>:    lgr    %r5,%r0
->
->    0x000003ff9075201a <+98>:    la    %r3,384(%r5)
->
->    0x000003ff9075201e <+102>:    la    %r4,384(%r1)
->
->    0x000003ff90752022 <+106>:    lghi    %r5,8
->
->    0x000003ff90752026 <+110>:    svc    175
->
->
-sys_rt_sigprocmask. r0 should not be changed by the system call.
->
->
->    0x000003ff90752028 <+112>:    lgr    %r5,%r0
->
-> => 0x000003ff9075202c <+116>:    lfpc    248(%r5)
->
->
-so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the
->
-2nd parameter to this
->
-function). Now this is odd.
->
->
->    0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
->
->    0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
->
->    0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
->
->    0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
->
->    0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
->
->    0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
->
->    0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
->
->    0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
->
->    0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
->
->    0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
->
->    0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
->
->    0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
->
->    0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
->
->    0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
->
->    0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
->
->    0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
->
->    0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
->
->    0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
->
->    0x000003ff9075207a <+194>:    br    %r14
->
-> End of assembler dump.
->
->
->
-> (gdb) i r
->
-> r0             0x0    0
->
-> r1             0x3ff8fe7de40    4396165881408
->
-> r2             0x0    0
->
-> r3             0x3ff8fe7e1c0    4396165882304
->
-> r4             0x3ff8fe7dfc0    4396165881792
->
-> r5             0x0    0
->
-> r6             0xffffffff88004880    18446744071696304256
->
-> r7             0x3ff880009e0    4396033247712
->
-> r8             0x27ff89000    10736930816
->
-> r9             0x3ff88001460    4396033250400
->
-> r10            0x1000    4096
->
-> r11            0x1261be0    19274720
->
-> r12            0x3ff88001e00    4396033252864
->
-> r13            0x14d0bc0    21826496
->
-> r14            0x1312ac8    19999432
->
-> r15            0x3ff8fe7dc80    4396165880960
->
-> pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
->
-> cc             0x2    2
-
-On 03/05/2018 02:08 PM, Christian Borntraeger wrote:
-Do you happen to run with a recent host kernel that has
-
-commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
-     s390: scrub registers on kernel entry and KVM exit
-Yes.
-Can you run with this on top
-diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
-index 13a133a6015c..d6dc0e5e8f74 100644
---- a/arch/s390/kernel/entry.S
-+++ b/arch/s390/kernel/entry.S
-@@ -426,13 +426,13 @@ ENTRY(system_call)
-         UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
-         BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
-         stmg    %r0,%r7,__PT_R0(%r11)
--       # clear user controlled register to prevent speculative use
--       xgr     %r0,%r0
-         mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
-         mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
-         mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
-         stg     %r14,__PT_FLAGS(%r11)
-  .Lsysc_do_svc:
-+       # clear user controlled register to prevent speculative use
-+       xgr     %r0,%r0
-         # load address of system call table
-         lg      %r10,__THREAD_sysc_table(%r13,%r12)
-         llgh    %r8,__PT_INT_CODE+2(%r11)
-
-
-To me it looks like that the critical section cleanup (interrupt during system 
-call entry) might
-save the registers again into ptregs but we have already zeroed out r0.
-This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
-critical
-section cleanup.
-Okay I will run with this.
-Adding Martin and Heiko. Will spin a patch.
-
-
-On 03/05/2018 07:54 PM, Christian Borntraeger wrote:
-On 03/05/2018 07:45 PM, Farhan Ali wrote:
-On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
-Please include the following gdb output:
-
-    (gdb) disas swapcontext
-    (gdb) i r
-
-That way it's possible to see which instruction faulted and which
-registers were being accessed.
-here is the disas out for swapcontext, this is on a coredump with debugging 
-symbols enabled for qemu. So the addresses from the previous dump is a little 
-different.
-
-
-(gdb) disas swapcontext
-Dump of assembler code for function swapcontext:
-    0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
-    0x000003ff90751fbc <+4>:    lgr    %r0,%r3
-    0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
-    0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
-    0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
-    0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
-    0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
-    0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
-    0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
-    0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
-    0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
-    0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
-    0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
-    0x000003ff90751fec <+52>:    std    %f10,336(%r1)
-    0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
-    0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
-    0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
-    0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
-    0x000003ff90752000 <+72>:    std    %f15,376(%r1)
-    0x000003ff90752004 <+76>:    slgr    %r2,%r2
-    0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
-    0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
-    0x000003ff90752012 <+90>:    la    %r2,2
-    0x000003ff90752016 <+94>:    lgr    %r5,%r0
-    0x000003ff9075201a <+98>:    la    %r3,384(%r5)
-    0x000003ff9075201e <+102>:    la    %r4,384(%r1)
-    0x000003ff90752022 <+106>:    lghi    %r5,8
-    0x000003ff90752026 <+110>:    svc    175
-sys_rt_sigprocmask. r0 should not be changed by the system call.
-   0x000003ff90752028 <+112>:    lgr    %r5,%r0
-=> 0x000003ff9075202c <+116>:    lfpc    248(%r5)
-so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the 
-2nd parameter to this
-function). Now this is odd.
-   0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
-    0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
-    0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
-    0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
-    0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
-    0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
-    0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
-    0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
-    0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
-    0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
-    0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
-    0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
-    0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
-    0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
-    0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
-    0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
-    0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
-    0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
-    0x000003ff9075207a <+194>:    br    %r14
-End of assembler dump.
-
-(gdb) i r
-r0             0x0    0
-r1             0x3ff8fe7de40    4396165881408
-r2             0x0    0
-r3             0x3ff8fe7e1c0    4396165882304
-r4             0x3ff8fe7dfc0    4396165881792
-r5             0x0    0
-r6             0xffffffff88004880    18446744071696304256
-r7             0x3ff880009e0    4396033247712
-r8             0x27ff89000    10736930816
-r9             0x3ff88001460    4396033250400
-r10            0x1000    4096
-r11            0x1261be0    19274720
-r12            0x3ff88001e00    4396033252864
-r13            0x14d0bc0    21826496
-r14            0x1312ac8    19999432
-r15            0x3ff8fe7dc80    4396165880960
-pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
-cc             0x2    2
-
-On Mon, 5 Mar 2018 20:08:45 +0100
-Christian Borntraeger <address@hidden> wrote:
-
->
-Do you happen to run with a recent host kernel that has
->
->
-commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
->
-s390: scrub registers on kernel entry and KVM exit
->
->
-Can you run with this on top
->
-diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
->
-index 13a133a6015c..d6dc0e5e8f74 100644
->
---- a/arch/s390/kernel/entry.S
->
-+++ b/arch/s390/kernel/entry.S
->
-@@ -426,13 +426,13 @@ ENTRY(system_call)
->
-UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
->
-BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
->
-stmg    %r0,%r7,__PT_R0(%r11)
->
--       # clear user controlled register to prevent speculative use
->
--       xgr     %r0,%r0
->
-mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
->
-mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
->
-mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
->
-stg     %r14,__PT_FLAGS(%r11)
->
-.Lsysc_do_svc:
->
-+       # clear user controlled register to prevent speculative use
->
-+       xgr     %r0,%r0
->
-# load address of system call table
->
-lg      %r10,__THREAD_sysc_table(%r13,%r12)
->
-llgh    %r8,__PT_INT_CODE+2(%r11)
->
->
->
-To me it looks like that the critical section cleanup (interrupt during
->
-system call entry) might
->
-save the registers again into ptregs but we have already zeroed out r0.
->
-This patch moves the clearing of r0 after sysc_do_svc, which should fix the
->
-critical
->
-section cleanup.
->
->
-Adding Martin and Heiko. Will spin a patch.
-Argh, yes. Thanks Chrisitan, this is it. I have been searching for the bug
-for days now. The point is that if the system call handler is interrupted
-after the xgr but before .Lsysc_do_svc the code at .Lcleanup_system_call 
-repeats the stmg for %r0-%r7 but now %r0 is already zero.
-
-Please commit a patch for this and I'll will queue it up immediately.
-
--- 
-blue skies,
-   Martin.
-
-"Reality continues to ruin my life." - Calvin.
-
-On 03/06/2018 01:34 AM, Martin Schwidefsky wrote:
-On Mon, 5 Mar 2018 20:08:45 +0100
-Christian Borntraeger <address@hidden> wrote:
-Do you happen to run with a recent host kernel that has
-
-commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
-     s390: scrub registers on kernel entry and KVM exit
-
-Can you run with this on top
-diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
-index 13a133a6015c..d6dc0e5e8f74 100644
---- a/arch/s390/kernel/entry.S
-+++ b/arch/s390/kernel/entry.S
-@@ -426,13 +426,13 @@ ENTRY(system_call)
-         UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
-         BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
-         stmg    %r0,%r7,__PT_R0(%r11)
--       # clear user controlled register to prevent speculative use
--       xgr     %r0,%r0
-         mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
-         mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
-         mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
-         stg     %r14,__PT_FLAGS(%r11)
-  .Lsysc_do_svc:
-+       # clear user controlled register to prevent speculative use
-+       xgr     %r0,%r0
-         # load address of system call table
-         lg      %r10,__THREAD_sysc_table(%r13,%r12)
-         llgh    %r8,__PT_INT_CODE+2(%r11)
-
-
-To me it looks like that the critical section cleanup (interrupt during system 
-call entry) might
-save the registers again into ptregs but we have already zeroed out r0.
-This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
-critical
-section cleanup.
-
-Adding Martin and Heiko. Will spin a patch.
-Argh, yes. Thanks Chrisitan, this is it. I have been searching for the bug
-for days now. The point is that if the system call handler is interrupted
-after the xgr but before .Lsysc_do_svc the code at .Lcleanup_system_call
-repeats the stmg for %r0-%r7 but now %r0 is already zero.
-
-Please commit a patch for this and I'll will queue it up immediately.
-This patch does fix the QEMU crash. I haven't seen the crash after
-running the test case for more than a day. Thanks to everyone for taking
-a look at this problem :)
-Thanks
-Farhan
-
diff --git a/results/classifier/005/other/23300761 b/results/classifier/005/other/23300761
deleted file mode 100644
index e546903c..00000000
--- a/results/classifier/005/other/23300761
+++ /dev/null
@@ -1,321 +0,0 @@
-other: 0.963
-assembly: 0.958
-semantic: 0.950
-device: 0.932
-boot: 0.929
-instruction: 0.929
-socket: 0.927
-vnc: 0.926
-graphic: 0.924
-KVM: 0.897
-network: 0.879
-mistranslation: 0.770
-
-[Qemu-devel] [BUG] 216 Alerts reported by LGTM for QEMU (some might be release critical)
-
-Hi,
-LGTM reports 16 errors, 81 warnings and 119 recommendations:
-https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
-.
-Some of them are already know (wrong format strings), others look like
-real errors:
-- several multiplication results which don't work as they should in
-contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
-32 bit!),  target/i386/translate.c and other files
-- potential buffer overflows in gdbstub.c and other files
-I am afraid that the overflows in the block code are release critical,
-maybe that in target/i386/translate.c and other errors, too.
-About half of the alerts are issues which can be fixed later.
-
-Regards
-
-Stefan
-
-On 13/07/19 19:46, Stefan Weil wrote:
->
->
-LGTM reports 16 errors, 81 warnings and 119 recommendations:
->
-https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
-.
->
->
-Some of them are already know (wrong format strings), others look like
->
-real errors:
->
->
-- several multiplication results which don't work as they should in
->
-contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
->
-32 bit!),  target/i386/translate.c and other files
-m->nb_clusters here is limited by s->l2_slice_size (see for example
-handle_alloc) so I wouldn't be surprised if this is a false positive.  I
-couldn't find this particular multiplication in Coverity, but it has
-about 250 issues marked as intentional or false positive so there's
-probably a lot of overlap with what LGTM found.
-
-Paolo
-
-Am 13.07.2019 um 21:42 schrieb Paolo Bonzini:
->
-On 13/07/19 19:46, Stefan Weil wrote:
->
-> LGTM reports 16 errors, 81 warnings and 119 recommendations:
->
->
-https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
-.
->
->
->
-> Some of them are already known (wrong format strings), others look like
->
-> real errors:
->
->
->
-> - several multiplication results which don't work as they should in
->
-> contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
->
-> 32 bit!),  target/i386/translate.c and other files
->
-m->nb_clusters here is limited by s->l2_slice_size (see for example
->
-handle_alloc) so I wouldn't be surprised if this is a false positive.  I
->
-couldn't find this particular multiplication in Coverity, but it has
->
-about 250 issues marked as intentional or false positive so there's
->
-probably a lot of overlap with what LGTM found.
->
->
-Paolo
->
-From other projects I know that there is a certain overlap between the
-results from Coverity Scan an LGTM, but it is good to have both
-analyzers, and the results from LGTM are typically quite reliable.
-
-Even if we know that there is no multiplication overflow, the code could
-be modified. Either the assigned value should use the same data type as
-the factors (possible when there is never an overflow, avoids a size
-extension), or the multiplication could use the larger data type by
-adding a type cast to one of the factors (then an overflow cannot
-happen, static code analysers and human reviewers have an easier job,
-but the multiplication costs more time).
-
-Stefan
-
-Am 14.07.2019 um 15:28 hat Stefan Weil geschrieben:
->
-Am 13.07.2019 um 21:42 schrieb Paolo Bonzini:
->
-> On 13/07/19 19:46, Stefan Weil wrote:
->
->> LGTM reports 16 errors, 81 warnings and 119 recommendations:
->
->>
-https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
-.
->
->>
->
->> Some of them are already known (wrong format strings), others look like
->
->> real errors:
->
->>
->
->> - several multiplication results which don't work as they should in
->
->> contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
->
->> 32 bit!),  target/i386/translate.c and other files
-Request sizes are limited to 32 bit in the generic block layer before
-they are even passed to the individual block drivers, so most if not all
-of these are going to be false positives.
-
->
-> m->nb_clusters here is limited by s->l2_slice_size (see for example
->
-> handle_alloc) so I wouldn't be surprised if this is a false positive.  I
->
-> couldn't find this particular multiplication in Coverity, but it has
->
-> about 250 issues marked as intentional or false positive so there's
->
-> probably a lot of overlap with what LGTM found.
->
->
->
-> Paolo
->
->
-From other projects I know that there is a certain overlap between the
->
-results from Coverity Scan an LGTM, but it is good to have both
->
-analyzers, and the results from LGTM are typically quite reliable.
->
->
-Even if we know that there is no multiplication overflow, the code could
->
-be modified. Either the assigned value should use the same data type as
->
-the factors (possible when there is never an overflow, avoids a size
->
-extension), or the multiplication could use the larger data type by
->
-adding a type cast to one of the factors (then an overflow cannot
->
-happen, static code analysers and human reviewers have an easier job,
->
-but the multiplication costs more time).
-But if you look at the code we're talking about, you see that it's
-complaining about things where being more explicit would make things
-less readable.
-
-For example, if complains about the multiplication in this line:
-
-    s->file_size += n * s->header.cluster_size;
-
-We know that n * s->header.cluster_size fits in 32 bits, but
-s->file_size is 64 bits (and has to be 64 bits). Do you really think we
-should introduce another uint32_t variable to store the intermediate
-result? And if we cast n to uint64_t, not only might the multiplication
-cost more time, but also human readers would wonder why the result could
-become larger than 32 bits. So a cast would be misleading.
-
-
-It also complains about this line:
-
-    ret = bdrv_truncate(bs->file, (3 + l1_clusters) * s->cluster_size,
-                        PREALLOC_MODE_OFF, &local_err);
-
-Here, we don't even assign the result to a 64 bit variable, but just
-pass it to a function which takes a 64 bit parameter. Again, I don't
-think introducing additional variables for the intermediate result or
-adding casts would be an improvement of the situation.
-
-
-So I don't think this is a good enough tool to base our code on what it
-does and doesn't understand. It would have too much of a negative impact
-on our code. We'd rather need a way to mark false positives as such and
-move on without changing the code in such cases.
-
-Kevin
-
-On Sat, 13 Jul 2019 at 18:46, Stefan Weil <address@hidden> wrote:
->
-LGTM reports 16 errors, 81 warnings and 119 recommendations:
->
-https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
-.
-I had a look at some of these before, but mostly I came
-to the conclusion that it wasn't worth trying to put the
-effort into keeping up with the site because they didn't
-seem to provide any useful way to mark things as false
-positives. Coverity has its flaws but at least you can do
-that kind of thing in its UI (it runs at about a 33% fp
-rate, I think.) "Analyzer thinks this multiply can overflow
-but in fact it's not possible" is quite a common false
-positive cause...
-
-Anyway, if you want to fish out specific issues, analyse
-whether they're false positive or real, and report them
-to the mailing list as followups to the patches which
-introduced the issue, that's probably the best way for
-us to make use of this analyzer. (That is essentially
-what I do for coverity.)
-
-thanks
--- PMM
-
-Am 14.07.2019 um 19:30 schrieb Peter Maydell:
-[...]
->
-"Analyzer thinks this multiply can overflow
->
-but in fact it's not possible" is quite a common false
->
-positive cause...
-The analysers don't complain because a multiply can overflow.
-
-They complain because the code indicates that a larger result is
-expected, for example uint64_t = uint32_t * uint32_t. They would not
-complain for the same multiplication if it were assigned to a uint32_t.
-
-So there is a simple solution to write the code in a way which avoids
-false positives...
-
-Stefan
-
-Stefan Weil <address@hidden> writes:
-
->
-Am 14.07.2019 um 19:30 schrieb Peter Maydell:
->
-[...]
->
-> "Analyzer thinks this multiply can overflow
->
-> but in fact it's not possible" is quite a common false
->
-> positive cause...
->
->
->
-The analysers don't complain because a multiply can overflow.
->
->
-They complain because the code indicates that a larger result is
->
-expected, for example uint64_t = uint32_t * uint32_t. They would not
->
-complain for the same multiplication if it were assigned to a uint32_t.
-I agree this is an anti-pattern.
-
->
-So there is a simple solution to write the code in a way which avoids
->
-false positives...
-You wrote elsewhere in this thread:
-
-    Either the assigned value should use the same data type as the
-    factors (possible when there is never an overflow, avoids a size
-    extension), or the multiplication could use the larger data type by
-    adding a type cast to one of the factors (then an overflow cannot
-    happen, static code analysers and human reviewers have an easier
-    job, but the multiplication costs more time).
-
-Makes sense to me.
-
-On 7/14/19 5:30 PM, Peter Maydell wrote:
->
-I had a look at some of these before, but mostly I came
->
-to the conclusion that it wasn't worth trying to put the
->
-effort into keeping up with the site because they didn't
->
-seem to provide any useful way to mark things as false
->
-positives. Coverity has its flaws but at least you can do
->
-that kind of thing in its UI (it runs at about a 33% fp
->
-rate, I think.)
-Yes, LGTM wants you to modify the source code with
-
-  /* lgtm [cpp/some-warning-code] */
-
-and on the same line as the reported problem.  Which is mildly annoying in that
-you're definitely committing to LGTM in the long term.  Also for any
-non-trivial bit of code, it will almost certainly run over 80 columns.
-
-
-r~
-
diff --git a/results/classifier/005/other/23448582 b/results/classifier/005/other/23448582
deleted file mode 100644
index 1d086d26..00000000
--- a/results/classifier/005/other/23448582
+++ /dev/null
@@ -1,273 +0,0 @@
-other: 0.990
-semantic: 0.987
-graphic: 0.987
-assembly: 0.986
-instruction: 0.983
-socket: 0.982
-mistranslation: 0.982
-device: 0.979
-network: 0.973
-vnc: 0.973
-boot: 0.967
-KVM: 0.958
-
-[BUG REPORT] cxl process in infinity loop
-
-Hi, all
-
-When I did the cxl memory hot-plug test on QEMU, I accidentally connected 
-two memdev to the same downstream port, the command like below:
-
->
--object memory-backend-ram,size=262144k,share=on,id=vmem0 \
->
--object memory-backend-ram,size=262144k,share=on,id=vmem1 \
->
--device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
->
--device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
->
--device cxl-upstream,bus=root_port0,id=us0 \
->
--device cxl-downstream,port=0,bus=us0,id=swport00,chassis=0,slot=5 \
->
--device cxl-downstream,port=0,bus=us0,id=swport01,chassis=0,slot=7 \
-same downstream port but has different slot!
-
->
--device cxl-type3,bus=swport00,volatile-memdev=vmem0,id=cxl-vmem0 \
->
--device cxl-type3,bus=swport01,volatile-memdev=vmem1,id=cxl-vmem1 \
->
--M
->
-cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=64G,cxl-fmw.0.interleave-granularity=4k
->
-\
-There is no error occurred when vm start, but when I executed the “cxl list” 
-command to view
-the CXL objects info, the process can not end properly.
-
-Then I used strace to trace the process, I found that the process is in 
-infinity loop:
-# strace cxl list
-......
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
-write(3, "1\n\0", 3)                    = 3
-close(3)                                = 0
-access("/run/udev/queue", F_OK)         = 0
-
-[Environment]:
-linux: V6.10-rc3
-QEMU: V9.0.0
-ndctl: v79
-
-I know this is because of the wrong use of the QEMU command, but I think we 
-should 
-be aware of this error in one of the QEMU, OS or ndctl side at least.
-
-Thanks
-Xingtao
-
-On Tue, 2 Jul 2024 00:30:06 +0000
-"Xingtao Yao (Fujitsu)" <yaoxt.fnst@fujitsu.com> wrote:
-
->
-Hi, all
->
->
-When I did the cxl memory hot-plug test on QEMU, I accidentally connected
->
-two memdev to the same downstream port, the command like below:
->
->
-> -object memory-backend-ram,size=262144k,share=on,id=vmem0 \
->
-> -object memory-backend-ram,size=262144k,share=on,id=vmem1 \
->
-> -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
->
-> -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
->
-> -device cxl-upstream,bus=root_port0,id=us0 \
->
-> -device cxl-downstream,port=0,bus=us0,id=swport00,chassis=0,slot=5 \
->
-> -device cxl-downstream,port=0,bus=us0,id=swport01,chassis=0,slot=7 \
->
-same downstream port but has different slot!
->
->
-> -device cxl-type3,bus=swport00,volatile-memdev=vmem0,id=cxl-vmem0 \
->
-> -device cxl-type3,bus=swport01,volatile-memdev=vmem1,id=cxl-vmem1 \
->
-> -M
->
-> cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=64G,cxl-fmw.0.interleave-granularity=4k
->
->  \
->
->
-There is no error occurred when vm start, but when I executed the “cxl list”
->
-command to view
->
-the CXL objects info, the process can not end properly.
-I'd be happy to look preventing this on QEMU side if you send one,
-but in general there are are lots of ways to shoot yourself in the
-foot with CXL and PCI device emulation in QEMU so I'm not going
-to rush to solve this specific one.
-
-Likewise, some hardening in kernel / userspace probably makes sense but
-this is a non compliant switch so priority of a fix is probably fairly low.
-
-Jonathan
-
->
->
-Then I used strace to trace the process, I found that the process is in
->
-infinity loop:
->
-# strace cxl list
->
-......
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
-clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
->
-openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
->
-write(3, "1\n\0", 3)                    = 3
->
-close(3)                                = 0
->
-access("/run/udev/queue", F_OK)         = 0
->
->
-[Environment]:
->
-linux: V6.10-rc3
->
-QEMU: V9.0.0
->
-ndctl: v79
->
->
-I know this is because of the wrong use of the QEMU command, but I think we
->
-should
->
-be aware of this error in one of the QEMU, OS or ndctl side at least.
->
->
-Thanks
->
-Xingtao
-
diff --git a/results/classifier/005/other/25892827 b/results/classifier/005/other/25892827
deleted file mode 100644
index 4477b5ae..00000000
--- a/results/classifier/005/other/25892827
+++ /dev/null
@@ -1,1085 +0,0 @@
-other: 0.892
-KVM: 0.872
-vnc: 0.846
-instruction: 0.842
-mistranslation: 0.842
-boot: 0.839
-network: 0.839
-device: 0.839
-graphic: 0.832
-assembly: 0.829
-semantic: 0.825
-socket: 0.822
-
-[Qemu-devel] [BUG/RFC] Two cpus are not brought up normally in SLES11 sp3 VM after reboot
-
-Hi,
-
-Recently we encountered a problem in our project: 2 CPUs in VM are not brought 
-up normally after reboot.
-
-Our host is using KVM kmod 3.6 and QEMU 2.1.
-A SLES 11 sp3 VM configured with 8 vcpus,
-cpu model is configured with 'host-passthrough'.
-
-After VM's first time started up, everything seems to be OK.
-and then VM is paniced and rebooted.
-After reboot, only 6 cpus are brought up in VM, cpu1 and cpu7 are not online.
-
-This is the only message we can get from VM:
-VM dmesg shows:
-[    0.069867] Booting Node   0, Processors  #1
-[    5.060042] CPU1: Stuck ??
-[    5.060499]  #2
-[    5.088322] kvm-clock: cpu 2, msr 6:3fc90901, secondary cpu clock
-[    5.088335] KVM setup async PF for cpu 2
-[    5.092967] NMI watchdog enabled, takes one hw-pmu counter.
-[    5.094405]  #3
-[    5.108324] kvm-clock: cpu 3, msr 6:3fcd0901, secondary cpu clock
-[    5.108333] KVM setup async PF for cpu 3
-[    5.113553] NMI watchdog enabled, takes one hw-pmu counter.
-[    5.114970]  #4
-[    5.128325] kvm-clock: cpu 4, msr 6:3fd10901, secondary cpu clock
-[    5.128336] KVM setup async PF for cpu 4
-[    5.134576] NMI watchdog enabled, takes one hw-pmu counter.
-[    5.135998]  #5
-[    5.152324] kvm-clock: cpu 5, msr 6:3fd50901, secondary cpu clock
-[    5.152334] KVM setup async PF for cpu 5
-[    5.154764] NMI watchdog enabled, takes one hw-pmu counter.
-[    5.156467]  #6
-[    5.172327] kvm-clock: cpu 6, msr 6:3fd90901, secondary cpu clock
-[    5.172341] KVM setup async PF for cpu 6
-[    5.180738] NMI watchdog enabled, takes one hw-pmu counter.
-[    5.182173]  #7 Ok.
-[   10.170815] CPU7: Stuck ??
-[   10.171648] Brought up 6 CPUs
-[   10.172394] Total of 6 processors activated (28799.97 BogoMIPS).
-
-From host, we found that QEMU vcpu1 thread and vcpu7 thread were not consuming 
-any cpu (Should be in idle state),
-All of VCPUs' stacks in host is like bellow:
-
-[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
-[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
-[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
-[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
-[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
-[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
-[<ffffffffffffffff>] 0xffffffffffffffff
-
-We looked into the kernel codes that could leading to the above 'Stuck' warning,
-and found that the only possible is the emulation of 'cpuid' instruct in 
-kvm/qemu has something wrong.
-But since we can’t reproduce this problem, we are not quite sure.
-Is there any possible that the cupid emulation in kvm/qemu has some bug ?
-
-Has anyone come across these problem before? Or any idea?
-
-Thanks,
-zhanghailiang
-
-On 06/07/2015 09:54, zhanghailiang wrote:
->
->
-From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
->
-consuming any cpu (Should be in idle state),
->
-All of VCPUs' stacks in host is like bellow:
->
->
-[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
->
-[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
->
-[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
->
-[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
->
-[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
->
-[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
->
-[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
->
-[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
->
-[<ffffffffffffffff>] 0xffffffffffffffff
->
->
-We looked into the kernel codes that could leading to the above 'Stuck'
->
-warning,
->
-and found that the only possible is the emulation of 'cpuid' instruct in
->
-kvm/qemu has something wrong.
->
-But since we can’t reproduce this problem, we are not quite sure.
->
-Is there any possible that the cupid emulation in kvm/qemu has some bug ?
-Can you explain the relationship to the cpuid emulation?  What do the
-traces say about vcpus 1 and 7?
-
-Paolo
-
-On 2015/7/6 16:45, Paolo Bonzini wrote:
-On 06/07/2015 09:54, zhanghailiang wrote:
-From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
-consuming any cpu (Should be in idle state),
-All of VCPUs' stacks in host is like bellow:
-
-[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
-[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
-[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
-[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
-[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
-[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
-[<ffffffffffffffff>] 0xffffffffffffffff
-
-We looked into the kernel codes that could leading to the above 'Stuck'
-warning,
-and found that the only possible is the emulation of 'cpuid' instruct in
-kvm/qemu has something wrong.
-But since we can’t reproduce this problem, we are not quite sure.
-Is there any possible that the cupid emulation in kvm/qemu has some bug ?
-Can you explain the relationship to the cpuid emulation?  What do the
-traces say about vcpus 1 and 7?
-OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
-located in
-do_boot_cpu(). It's in BSP context, the call process is:
-BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
--> wakeup_secondary_via_INIT() to trigger APs.
-It will wait 5s for APs to startup, if some AP not startup normally, it will 
-print 'CPU%d Stuck' or 'CPU%d: Not responding'.
-
-If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
-begins to execute the code
-'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
-smp_callin()(smpboot.c).
-The follow is the starup process of BSP and AP.
-BSP:
-start_kernel()
-  ->smp_init()
-     ->smp_boot_cpus()
-       ->do_boot_cpu()
-           ->start_ip = trampoline_address(); //set the address that AP will go 
-to execute
-           ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
-           ->for (timeout = 0; timeout < 50000; timeout++)
-               if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if AP 
-startup or not
-
-APs:
-ENTRY(trampoline_data) (trampoline_64.S)
-      ->ENTRY(secondary_startup_64) (head_64.S)
-         ->start_secondary() (smpboot.c)
-            ->cpu_init();
-            ->smp_callin();
-                ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP comes 
-here, the BSP will not prints the error message.
-
-From above call process, we can be sure that, the AP has been stuck between 
-trampoline_data and the cpumask_set_cpu() in
-smp_callin(), we look through these codes path carefully, and only found a 
-'hlt' instruct that could block the process.
-It is located in trampoline_data():
-
-ENTRY(trampoline_data)
-        ...
-
-        call    verify_cpu              # Verify the cpu supports long mode
-        testl   %eax, %eax              # Check for return code
-        jnz     no_longmode
-
-        ...
-
-no_longmode:
-        hlt
-        jmp no_longmode
-
-For the process verify_cpu(),
-we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
-No-root mode.
-This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
-the fail in verify_cpu.
-
-From the message in VM, we know vcpu1 and vcpu7 is something wrong.
-[    5.060042] CPU1: Stuck ??
-[   10.170815] CPU7: Stuck ??
-[   10.171648] Brought up 6 CPUs
-
-Besides, the follow is the cpus message got from host.
-80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
-instance-0000000
-* CPU #0: pc=0x00007f64160c683d thread_id=68570
-  CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
-  CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
-  CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
-  CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
-  CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
-  CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
-  CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
-
-Oh, i also forgot to mention in the above message that, we have bond each vCPU 
-to different physical CPU in
-host.
-
-Thanks,
-zhanghailiang
-
-On 06/07/2015 11:59, zhanghailiang wrote:
->
->
->
-Besides, the follow is the cpus message got from host.
->
-80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
->
-qemu-monitor-command instance-0000000
->
-* CPU #0: pc=0x00007f64160c683d thread_id=68570
->
-CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
->
-CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
->
-CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
->
-CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
->
-CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
->
-CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
->
-CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
->
->
-Oh, i also forgot to mention in the above message that, we have bond
->
-each vCPU to different physical CPU in
->
-host.
-Can you capture a trace on the host (trace-cmd record -e kvm) and send
-it privately?  Please note which CPUs get stuck, since I guess it's not
-always 1 and 7.
-
-Paolo
-
-On Mon, 6 Jul 2015 17:59:10 +0800
-zhanghailiang <address@hidden> wrote:
-
->
-On 2015/7/6 16:45, Paolo Bonzini wrote:
->
->
->
->
->
-> On 06/07/2015 09:54, zhanghailiang wrote:
->
->>
->
->>  From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
->
->> consuming any cpu (Should be in idle state),
->
->> All of VCPUs' stacks in host is like bellow:
->
->>
->
->> [<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
->
->> [<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
->
->> [<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
->
->> [<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
->
->> [<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
->
->> [<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
->
->> [<ffffffff81468092>] system_call_fastpath+0x16/0x1b
->
->> [<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
->
->> [<ffffffffffffffff>] 0xffffffffffffffff
->
->>
->
->> We looked into the kernel codes that could leading to the above 'Stuck'
->
->> warning,
-in current upstream there isn't any printk(...Stuck...) left since that code 
-path
-has been reworked.
-I've often seen this on over-committed host during guest CPUs up/down torture 
-test.
-Could you update guest kernel to upstream and see if issue reproduces?
-
->
->> and found that the only possible is the emulation of 'cpuid' instruct in
->
->> kvm/qemu has something wrong.
->
->> But since we can’t reproduce this problem, we are not quite sure.
->
->> Is there any possible that the cupid emulation in kvm/qemu has some bug ?
->
->
->
-> Can you explain the relationship to the cpuid emulation?  What do the
->
-> traces say about vcpus 1 and 7?
->
->
-OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is
->
-located in
->
-do_boot_cpu(). It's in BSP context, the call process is:
->
-BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu()
->
--> wakeup_secondary_via_INIT() to trigger APs.
->
-It will wait 5s for APs to startup, if some AP not startup normally, it will
->
-print 'CPU%d Stuck' or 'CPU%d: Not responding'.
->
->
-If it prints 'Stuck', it means the AP has received the SIPI interrupt and
->
-begins to execute the code
->
-'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places
->
-before smp_callin()(smpboot.c).
->
-The follow is the starup process of BSP and AP.
->
-BSP:
->
-start_kernel()
->
-->smp_init()
->
-->smp_boot_cpus()
->
-->do_boot_cpu()
->
-->start_ip = trampoline_address(); //set the address that AP will
->
-go to execute
->
-->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
->
-->for (timeout = 0; timeout < 50000; timeout++)
->
-if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if
->
-AP startup or not
->
->
-APs:
->
-ENTRY(trampoline_data) (trampoline_64.S)
->
-->ENTRY(secondary_startup_64) (head_64.S)
->
-->start_secondary() (smpboot.c)
->
-->cpu_init();
->
-->smp_callin();
->
-->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP
->
-comes here, the BSP will not prints the error message.
->
->
-From above call process, we can be sure that, the AP has been stuck between
->
-trampoline_data and the cpumask_set_cpu() in
->
-smp_callin(), we look through these codes path carefully, and only found a
->
-'hlt' instruct that could block the process.
->
-It is located in trampoline_data():
->
->
-ENTRY(trampoline_data)
->
-...
->
->
-call    verify_cpu              # Verify the cpu supports long mode
->
-testl   %eax, %eax              # Check for return code
->
-jnz     no_longmode
->
->
-...
->
->
-no_longmode:
->
-hlt
->
-jmp no_longmode
->
->
-For the process verify_cpu(),
->
-we can only find the 'cpuid' sensitive instruct that could lead VM exit from
->
-No-root mode.
->
-This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to
->
-the fail in verify_cpu.
->
->
-From the message in VM, we know vcpu1 and vcpu7 is something wrong.
->
-[    5.060042] CPU1: Stuck ??
->
-[   10.170815] CPU7: Stuck ??
->
-[   10.171648] Brought up 6 CPUs
->
->
-Besides, the follow is the cpus message got from host.
->
-80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
->
-qemu-monitor-command instance-0000000
->
-* CPU #0: pc=0x00007f64160c683d thread_id=68570
->
-CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
->
-CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
->
-CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
->
-CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
->
-CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
->
-CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
->
-CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
->
->
-Oh, i also forgot to mention in the above message that, we have bond each
->
-vCPU to different physical CPU in
->
-host.
->
->
-Thanks,
->
-zhanghailiang
->
->
->
->
->
---
->
-To unsubscribe from this list: send the line "unsubscribe kvm" in
->
-the body of a message to address@hidden
->
-More majordomo info at
-http://vger.kernel.org/majordomo-info.html
-
-On 2015/7/7 19:23, Igor Mammedov wrote:
-On Mon, 6 Jul 2015 17:59:10 +0800
-zhanghailiang <address@hidden> wrote:
-On 2015/7/6 16:45, Paolo Bonzini wrote:
-On 06/07/2015 09:54, zhanghailiang wrote:
-From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
-consuming any cpu (Should be in idle state),
-All of VCPUs' stacks in host is like bellow:
-
-[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
-[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
-[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
-[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
-[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
-[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
-[<ffffffffffffffff>] 0xffffffffffffffff
-
-We looked into the kernel codes that could leading to the above 'Stuck'
-warning,
-in current upstream there isn't any printk(...Stuck...) left since that code 
-path
-has been reworked.
-I've often seen this on over-committed host during guest CPUs up/down torture 
-test.
-Could you update guest kernel to upstream and see if issue reproduces?
-Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to 
-reproduce it.
-
-For your test case, is it a kernel bug?
-Or is there any related patch could solve your test problem been merged into
-upstream ?
-
-Thanks,
-zhanghailiang
-and found that the only possible is the emulation of 'cpuid' instruct in
-kvm/qemu has something wrong.
-But since we can’t reproduce this problem, we are not quite sure.
-Is there any possible that the cupid emulation in kvm/qemu has some bug ?
-Can you explain the relationship to the cpuid emulation?  What do the
-traces say about vcpus 1 and 7?
-OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
-located in
-do_boot_cpu(). It's in BSP context, the call process is:
-BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
--> wakeup_secondary_via_INIT() to trigger APs.
-It will wait 5s for APs to startup, if some AP not startup normally, it will 
-print 'CPU%d Stuck' or 'CPU%d: Not responding'.
-
-If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
-begins to execute the code
-'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
-smp_callin()(smpboot.c).
-The follow is the starup process of BSP and AP.
-BSP:
-start_kernel()
-    ->smp_init()
-       ->smp_boot_cpus()
-         ->do_boot_cpu()
-             ->start_ip = trampoline_address(); //set the address that AP will 
-go to execute
-             ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
-             ->for (timeout = 0; timeout < 50000; timeout++)
-                 if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if 
-AP startup or not
-
-APs:
-ENTRY(trampoline_data) (trampoline_64.S)
-        ->ENTRY(secondary_startup_64) (head_64.S)
-           ->start_secondary() (smpboot.c)
-              ->cpu_init();
-              ->smp_callin();
-                  ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP 
-comes here, the BSP will not prints the error message.
-
-  From above call process, we can be sure that, the AP has been stuck between 
-trampoline_data and the cpumask_set_cpu() in
-smp_callin(), we look through these codes path carefully, and only found a 
-'hlt' instruct that could block the process.
-It is located in trampoline_data():
-
-ENTRY(trampoline_data)
-          ...
-
-        call    verify_cpu              # Verify the cpu supports long mode
-        testl   %eax, %eax              # Check for return code
-        jnz     no_longmode
-
-          ...
-
-no_longmode:
-        hlt
-        jmp no_longmode
-
-For the process verify_cpu(),
-we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
-No-root mode.
-This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
-the fail in verify_cpu.
-
-  From the message in VM, we know vcpu1 and vcpu7 is something wrong.
-[    5.060042] CPU1: Stuck ??
-[   10.170815] CPU7: Stuck ??
-[   10.171648] Brought up 6 CPUs
-
-Besides, the follow is the cpus message got from host.
-80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
-instance-0000000
-* CPU #0: pc=0x00007f64160c683d thread_id=68570
-    CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
-    CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
-    CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
-    CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
-    CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
-    CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
-    CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
-
-Oh, i also forgot to mention in the above message that, we have bond each vCPU 
-to different physical CPU in
-host.
-
-Thanks,
-zhanghailiang
-
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe kvm" in
-the body of a message to address@hidden
-More majordomo info at
-http://vger.kernel.org/majordomo-info.html
-.
-
-On Tue, 7 Jul 2015 19:43:35 +0800
-zhanghailiang <address@hidden> wrote:
-
->
-On 2015/7/7 19:23, Igor Mammedov wrote:
->
-> On Mon, 6 Jul 2015 17:59:10 +0800
->
-> zhanghailiang <address@hidden> wrote:
->
->
->
->> On 2015/7/6 16:45, Paolo Bonzini wrote:
->
->>>
->
->>>
->
->>> On 06/07/2015 09:54, zhanghailiang wrote:
->
->>>>
->
->>>>   From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
->
->>>> consuming any cpu (Should be in idle state),
->
->>>> All of VCPUs' stacks in host is like bellow:
->
->>>>
->
->>>> [<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
->
->>>> [<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
->
->>>> [<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
->
->>>> [<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
->
->>>> [<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
->
->>>> [<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
->
->>>> [<ffffffff81468092>] system_call_fastpath+0x16/0x1b
->
->>>> [<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
->
->>>> [<ffffffffffffffff>] 0xffffffffffffffff
->
->>>>
->
->>>> We looked into the kernel codes that could leading to the above 'Stuck'
->
->>>> warning,
->
-> in current upstream there isn't any printk(...Stuck...) left since that
->
-> code path
->
-> has been reworked.
->
-> I've often seen this on over-committed host during guest CPUs up/down
->
-> torture test.
->
-> Could you update guest kernel to upstream and see if issue reproduces?
->
->
->
->
-Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to
->
-reproduce it.
->
->
-For your test case, is it a kernel bug?
->
-Or is there any related patch could solve your test problem been merged into
->
-upstream ?
-I don't remember all prerequisite patches but you should be able to find
-http://marc.info/?l=linux-kernel&m=140326703108009&w=2
-"x86/smpboot: Initialize secondary CPU only if master CPU will wait for it"
-and then look for dependencies.
-
-
->
->
-Thanks,
->
-zhanghailiang
->
->
->>>> and found that the only possible is the emulation of 'cpuid' instruct in
->
->>>> kvm/qemu has something wrong.
->
->>>> But since we can’t reproduce this problem, we are not quite sure.
->
->>>> Is there any possible that the cupid emulation in kvm/qemu has some bug ?
->
->>>
->
->>> Can you explain the relationship to the cpuid emulation?  What do the
->
->>> traces say about vcpus 1 and 7?
->
->>
->
->> OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is
->
->> located in
->
->> do_boot_cpu(). It's in BSP context, the call process is:
->
->> BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() ->
->
->> do_boot_cpu() -> wakeup_secondary_via_INIT() to trigger APs.
->
->> It will wait 5s for APs to startup, if some AP not startup normally, it
->
->> will print 'CPU%d Stuck' or 'CPU%d: Not responding'.
->
->>
->
->> If it prints 'Stuck', it means the AP has received the SIPI interrupt and
->
->> begins to execute the code
->
->> 'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places
->
->> before smp_callin()(smpboot.c).
->
->> The follow is the starup process of BSP and AP.
->
->> BSP:
->
->> start_kernel()
->
->>     ->smp_init()
->
->>        ->smp_boot_cpus()
->
->>          ->do_boot_cpu()
->
->>              ->start_ip = trampoline_address(); //set the address that AP
->
->> will go to execute
->
->>              ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
->
->>              ->for (timeout = 0; timeout < 50000; timeout++)
->
->>                  if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;//
->
->> check if AP startup or not
->
->>
->
->> APs:
->
->> ENTRY(trampoline_data) (trampoline_64.S)
->
->>         ->ENTRY(secondary_startup_64) (head_64.S)
->
->>            ->start_secondary() (smpboot.c)
->
->>               ->cpu_init();
->
->>               ->smp_callin();
->
->>                   ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP
->
->> comes here, the BSP will not prints the error message.
->
->>
->
->>   From above call process, we can be sure that, the AP has been stuck
->
->> between trampoline_data and the cpumask_set_cpu() in
->
->> smp_callin(), we look through these codes path carefully, and only found a
->
->> 'hlt' instruct that could block the process.
->
->> It is located in trampoline_data():
->
->>
->
->> ENTRY(trampoline_data)
->
->>           ...
->
->>
->
->>    call    verify_cpu              # Verify the cpu supports long mode
->
->>    testl   %eax, %eax              # Check for return code
->
->>    jnz     no_longmode
->
->>
->
->>           ...
->
->>
->
->> no_longmode:
->
->>    hlt
->
->>    jmp no_longmode
->
->>
->
->> For the process verify_cpu(),
->
->> we can only find the 'cpuid' sensitive instruct that could lead VM exit
->
->> from No-root mode.
->
->> This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading
->
->> to the fail in verify_cpu.
->
->>
->
->>   From the message in VM, we know vcpu1 and vcpu7 is something wrong.
->
->> [    5.060042] CPU1: Stuck ??
->
->> [   10.170815] CPU7: Stuck ??
->
->> [   10.171648] Brought up 6 CPUs
->
->>
->
->> Besides, the follow is the cpus message got from host.
->
->> 80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
->
->> qemu-monitor-command instance-0000000
->
->> * CPU #0: pc=0x00007f64160c683d thread_id=68570
->
->>     CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
->
->>     CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
->
->>     CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
->
->>     CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
->
->>     CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
->
->>     CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
->
->>     CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
->
->>
->
->> Oh, i also forgot to mention in the above message that, we have bond each
->
->> vCPU to different physical CPU in
->
->> host.
->
->>
->
->> Thanks,
->
->> zhanghailiang
->
->>
->
->>
->
->>
->
->>
->
->> --
->
->> To unsubscribe from this list: send the line "unsubscribe kvm" in
->
->> the body of a message to address@hidden
->
->> More majordomo info at
-http://vger.kernel.org/majordomo-info.html
->
->
->
->
->
-> .
->
->
->
->
->
-
-On 2015/7/7 20:21, Igor Mammedov wrote:
-On Tue, 7 Jul 2015 19:43:35 +0800
-zhanghailiang <address@hidden> wrote:
-On 2015/7/7 19:23, Igor Mammedov wrote:
-On Mon, 6 Jul 2015 17:59:10 +0800
-zhanghailiang <address@hidden> wrote:
-On 2015/7/6 16:45, Paolo Bonzini wrote:
-On 06/07/2015 09:54, zhanghailiang wrote:
-From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
-consuming any cpu (Should be in idle state),
-All of VCPUs' stacks in host is like bellow:
-
-[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
-[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
-[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
-[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
-[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
-[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
-[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
-[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
-[<ffffffffffffffff>] 0xffffffffffffffff
-
-We looked into the kernel codes that could leading to the above 'Stuck'
-warning,
-in current upstream there isn't any printk(...Stuck...) left since that code 
-path
-has been reworked.
-I've often seen this on over-committed host during guest CPUs up/down torture 
-test.
-Could you update guest kernel to upstream and see if issue reproduces?
-Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to 
-reproduce it.
-
-For your test case, is it a kernel bug?
-Or is there any related patch could solve your test problem been merged into
-upstream ?
-I don't remember all prerequisite patches but you should be able to find
-http://marc.info/?l=linux-kernel&m=140326703108009&w=2
-"x86/smpboot: Initialize secondary CPU only if master CPU will wait for it"
-and then look for dependencies.
-Er, we have investigated this patch, and it is not related to our problem, :)
-
-Thanks.
-Thanks,
-zhanghailiang
-and found that the only possible is the emulation of 'cpuid' instruct in
-kvm/qemu has something wrong.
-But since we can’t reproduce this problem, we are not quite sure.
-Is there any possible that the cupid emulation in kvm/qemu has some bug ?
-Can you explain the relationship to the cpuid emulation?  What do the
-traces say about vcpus 1 and 7?
-OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
-located in
-do_boot_cpu(). It's in BSP context, the call process is:
-BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
--> wakeup_secondary_via_INIT() to trigger APs.
-It will wait 5s for APs to startup, if some AP not startup normally, it will 
-print 'CPU%d Stuck' or 'CPU%d: Not responding'.
-
-If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
-begins to execute the code
-'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
-smp_callin()(smpboot.c).
-The follow is the starup process of BSP and AP.
-BSP:
-start_kernel()
-     ->smp_init()
-        ->smp_boot_cpus()
-          ->do_boot_cpu()
-              ->start_ip = trampoline_address(); //set the address that AP will 
-go to execute
-              ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
-              ->for (timeout = 0; timeout < 50000; timeout++)
-                  if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if 
-AP startup or not
-
-APs:
-ENTRY(trampoline_data) (trampoline_64.S)
-         ->ENTRY(secondary_startup_64) (head_64.S)
-            ->start_secondary() (smpboot.c)
-               ->cpu_init();
-               ->smp_callin();
-                   ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP 
-comes here, the BSP will not prints the error message.
-
-   From above call process, we can be sure that, the AP has been stuck between 
-trampoline_data and the cpumask_set_cpu() in
-smp_callin(), we look through these codes path carefully, and only found a 
-'hlt' instruct that could block the process.
-It is located in trampoline_data():
-
-ENTRY(trampoline_data)
-           ...
-
-        call    verify_cpu              # Verify the cpu supports long mode
-        testl   %eax, %eax              # Check for return code
-        jnz     no_longmode
-
-           ...
-
-no_longmode:
-        hlt
-        jmp no_longmode
-
-For the process verify_cpu(),
-we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
-No-root mode.
-This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
-the fail in verify_cpu.
-
-   From the message in VM, we know vcpu1 and vcpu7 is something wrong.
-[    5.060042] CPU1: Stuck ??
-[   10.170815] CPU7: Stuck ??
-[   10.171648] Brought up 6 CPUs
-
-Besides, the follow is the cpus message got from host.
-80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
-instance-0000000
-* CPU #0: pc=0x00007f64160c683d thread_id=68570
-     CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
-     CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
-     CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
-     CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
-     CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
-     CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
-     CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
-
-Oh, i also forgot to mention in the above message that, we have bond each vCPU 
-to different physical CPU in
-host.
-
-Thanks,
-zhanghailiang
-
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe kvm" in
-the body of a message to address@hidden
-More majordomo info at
-http://vger.kernel.org/majordomo-info.html
-.
-.
-
diff --git a/results/classifier/005/other/31349848 b/results/classifier/005/other/31349848
deleted file mode 100644
index 2177a1bc..00000000
--- a/results/classifier/005/other/31349848
+++ /dev/null
@@ -1,162 +0,0 @@
-other: 0.901
-device: 0.881
-graphic: 0.876
-assembly: 0.855
-vnc: 0.854
-semantic: 0.846
-socket: 0.846
-instruction: 0.845
-KVM: 0.827
-boot: 0.815
-mistranslation: 0.781
-network: 0.769
-
-[Qemu-devel]  [BUG] qemu stuck when detach host-usb device
-
-Description of problem:
-The guest has a host-usb device(Kingston Technology DataTraveler 100 G3/G4/SE9 
-G2), which is attached
-to xhci controller(on host). Qemu will stuck if I detach it from guest.
-
-How reproducible:
-100%
-
-Steps to Reproduce:
-1.            Use usb stick to copy files in guest , make it busy working.
-2.            virsh detach-device vm_name usb.xml
-
-Then qemu will stuck for 20s, I found this is because libusb_release_interface 
-block for 20s.
-Dmesg prints:
-
-[35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
-[35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
-[35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
-[35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
-
-Is this a hardware error or software's bug?
-
-On Tue, Nov 27, 2018 at 01:26:24AM +0000, linzhecheng wrote:
->
-Description of problem:
->
-The guest has a host-usb device(Kingston Technology DataTraveler 100
->
-G3/G4/SE9 G2), which is attached
->
-to xhci controller(on host). Qemu will stuck if I detach it from guest.
->
->
-How reproducible:
->
-100%
->
->
-Steps to Reproduce:
->
-1.            Use usb stick to copy files in guest , make it busy working.
->
-2.            virsh detach-device vm_name usb.xml
->
->
-Then qemu will stuck for 20s, I found this is because
->
-libusb_release_interface block for 20s.
->
-Dmesg prints:
->
->
-[35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
->
-[35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
->
-[35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
->
-[35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
->
->
-Is this a hardware error or software's bug?
-I'd guess software error, could be is libusb or (host) linux kernel.
-Cc'ing libusb-devel.
-
-cheers,
-  Gerd
-
->
------Original Message-----
->
-From: Gerd Hoffmann [
-mailto:address@hidden
->
-Sent: Tuesday, November 27, 2018 2:09 PM
->
-To: linzhecheng <address@hidden>
->
-Cc: address@hidden; wangxin (U) <address@hidden>;
->
-Zhoujian (jay) <address@hidden>; address@hidden
->
-Subject: Re: [Qemu-devel] [BUG] qemu stuck when detach host-usb device
->
->
-On Tue, Nov 27, 2018 at 01:26:24AM +0000, linzhecheng wrote:
->
-> Description of problem:
->
-> The guest has a host-usb device(Kingston Technology DataTraveler 100
->
-> G3/G4/SE9 G2), which is attached to xhci controller(on host). Qemu will
->
-> stuck
->
-if I detach it from guest.
->
->
->
-> How reproducible:
->
-> 100%
->
->
->
-> Steps to Reproduce:
->
-> 1.            Use usb stick to copy files in guest , make it busy working.
->
-> 2.            virsh detach-device vm_name usb.xml
->
->
->
-> Then qemu will stuck for 20s, I found this is because
->
-> libusb_release_interface
->
-block for 20s.
->
-> Dmesg prints:
->
->
->
-> [35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
->
-> [35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
->
-> [35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
->
-> [35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
->
->
->
-> Is this a hardware error or software's bug?
->
->
-I'd guess software error, could be is libusb or (host) linux kernel.
->
-Cc'ing libusb-devel.
-Perhaps it's usb driver's bug. Could you also reproduce it?
->
->
-cheers,
->
-Gerd
-
diff --git a/results/classifier/005/other/32484936 b/results/classifier/005/other/32484936
deleted file mode 100644
index 8cada8da..00000000
--- a/results/classifier/005/other/32484936
+++ /dev/null
@@ -1,231 +0,0 @@
-other: 0.856
-assembly: 0.835
-semantic: 0.832
-vnc: 0.830
-device: 0.830
-instruction: 0.829
-socket: 0.829
-graphic: 0.813
-network: 0.811
-boot: 0.810
-mistranslation: 0.794
-KVM: 0.793
-
-[Qemu-devel] [Snapshot Bug?]Qcow2 meta data corruption
-
-Hi all,
-There was a problem about qcow2 image file happened in my serval vms and I could not figure it out,
-so have to ask for some help.
-Here is the thing:
-At first, I found there were some data corruption in a vm, so I did qemu-img check to all my vms.
-parts of check report:
-3-Leaked cluster 2926229 refcount=1 reference=0
-4-Leaked cluster 3021181 refcount=1 reference=0
-5-Leaked cluster 3021182 refcount=1 reference=0
-6-Leaked cluster 3021183 refcount=1 reference=0
-7-Leaked cluster 3021184 refcount=1 reference=0
-8-ERROR cluster 3102547 refcount=3 reference=4
-9-ERROR cluster 3111536 refcount=3 reference=4
-10-ERROR cluster 3113369 refcount=3 reference=4
-11-ERROR cluster 3235590 refcount=10 reference=11
-12-ERROR cluster 3235591 refcount=10 reference=11
-423-Warning: cluster offset=0xc000c00020000 is after the end of the image file, can't properly check refcounts.
-424-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-425-Warning: cluster offset=0xc0001000c0000 is after the end of the image file, can't properly check refcounts.
-426-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-427-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-428-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-429-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-430-Warning: cluster offset=0xc000c00010000 is after the end of the image file, can't properly check refcounts.
-After a futher look in, I found two l2 entries point to the same cluster, and that was found in serval qcow2 image files of different vms.
-Like this:
-table entry conflict (with our qcow2 check 
-tool):
-a table offset : 0x00000093f7080000 level : 2, l1 table entry 100, l2 table entry 7
-b table offset : 0x00000093f7080000 level : 2, l1 table entry 5, l2 table entry 7
-table entry conflict :
-a table offset : 0x00000000a01e0000 level : 2, l1 table entry 100, l2 table entry 19
-b table offset : 0x00000000a01e0000 level : 2, l1 table entry 5, l2 table entry 19
-table entry conflict :
-a table offset : 0x00000000a01d0000 level : 2, l1 table entry 100, l2 table entry 18
-b table offset : 0x00000000a01d0000 level : 2, l1 table entry 5, l2 table entry 18
-table entry conflict :
-a table offset : 0x00000000a01c0000 level : 2, l1 table entry 100, l2 table entry 17
-b table offset : 0x00000000a01c0000 level : 2, l1 table entry 5, l2 table entry 17
-table entry conflict :
-a table offset : 0x00000000a01b0000 level : 2, l1 table entry 100, l2 table entry 16
-b table offset : 0x00000000a01b0000 level : 2, l1 table entry 5, l2 table entry 16
-I think the problem is relate to the snapshot create, delete. But I cant reproduce it .
-Can Anyone give a hint about how this happen?
-Qemu version 2.0.1, I download the source code and make install it.
-Qemu parameters:
-/usr/bin/kvm -chardev socket,id=qmp,path=/var/run/qemu-server/5855899639838.qmp,server,nowait -mon chardev=qmp,mode=control -vnc :0,websocket,to=200 -enable-kvm -pidfile /var/run/qemu-server/5855899639838.pid -daemonize -name yfMailSvr-200.200.0.14 -smp sockets=1,cores=4 -cpu core2duo,hv_spinlocks=0xffff,hv_relaxed,hv_time,hv_vapic,+sse4.1,+sse4.2,+x2apic,+erms,+smep,+fsgsbase,+f16c,+dca,+pcid,+pdcm,+xtpr,+ht,+ss,+acpi,+ds -nodefaults -vga cirrus -k en-us -boot menu=on,splash-time=8000 -m 8192 -usb -drive if=none,id=drive-ide0,media=cdrom,aio=native -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0 -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-1.qcow2,if=none,id=drive-virtio1,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-2.qcow2,if=none,id=drive-virtio2,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio2,id=virtio2,bus=pci.0,addr=0xc,bootindex=101 -netdev type=tap,id=net0,ifname=585589963983800,script=/sf/etc/kvm/vtp-bridge,vhost=on,vhostforce=on -device virtio-net-pci,romfile=,mac=FE:FC:FE:F0:AB:BA,netdev=net0,bus=pci.0,addr=0x12,id=net0 -rtc driftfix=slew,clock=rt,base=localtime -global kvm-pit.lost_tick_policy=discard -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1
-Thanks
-Sangfor VT.
-leijian
-
-Hi all,
-There was a problem about qcow2 image file happened in my serval vms and I could not figure it out,
-so have to ask for some help.
-Here is the thing:
-At first, I found there were some data corruption in a vm, so I did qemu-img check to all my vms.
-parts of check report:
-3-Leaked cluster 2926229 refcount=1 reference=0
-4-Leaked cluster 3021181 refcount=1 reference=0
-5-Leaked cluster 3021182 refcount=1 reference=0
-6-Leaked cluster 3021183 refcount=1 reference=0
-7-Leaked cluster 3021184 refcount=1 reference=0
-8-ERROR cluster 3102547 refcount=3 reference=4
-9-ERROR cluster 3111536 refcount=3 reference=4
-10-ERROR cluster 3113369 refcount=3 reference=4
-11-ERROR cluster 3235590 refcount=10 reference=11
-12-ERROR cluster 3235591 refcount=10 reference=11
-423-Warning: cluster offset=0xc000c00020000 is after the end of the image file, can't properly check refcounts.
-424-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-425-Warning: cluster offset=0xc0001000c0000 is after the end of the image file, can't properly check refcounts.
-426-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-427-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-428-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-429-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
-430-Warning: cluster offset=0xc000c00010000 is after the end of the image file, can't properly check refcounts.
-After a futher look in, I found two l2 entries point to the same cluster, and that was found in serval qcow2 image files of different vms.
-Like this:
-table entry conflict (with our qcow2 check 
-tool):
-a table offset : 0x00000093f7080000 level : 2, l1 table entry 100, l2 table entry 7
-b table offset : 0x00000093f7080000 level : 2, l1 table entry 5, l2 table entry 7
-table entry conflict :
-a table offset : 0x00000000a01e0000 level : 2, l1 table entry 100, l2 table entry 19
-b table offset : 0x00000000a01e0000 level : 2, l1 table entry 5, l2 table entry 19
-table entry conflict :
-a table offset : 0x00000000a01d0000 level : 2, l1 table entry 100, l2 table entry 18
-b table offset : 0x00000000a01d0000 level : 2, l1 table entry 5, l2 table entry 18
-table entry conflict :
-a table offset : 0x00000000a01c0000 level : 2, l1 table entry 100, l2 table entry 17
-b table offset : 0x00000000a01c0000 level : 2, l1 table entry 5, l2 table entry 17
-table entry conflict :
-a table offset : 0x00000000a01b0000 level : 2, l1 table entry 100, l2 table entry 16
-b table offset : 0x00000000a01b0000 level : 2, l1 table entry 5, l2 table entry 16
-I think the problem is relate to the snapshot create, delete. But I cant reproduce it .
-Can Anyone give a hint about how this happen?
-Qemu version 2.0.1, I download the source code and make install it.
-Qemu parameters:
-/usr/bin/kvm -chardev socket,id=qmp,path=/var/run/qemu-server/5855899639838.qmp,server,nowait -mon chardev=qmp,mode=control -vnc :0,websocket,to=200 -enable-kvm -pidfile /var/run/qemu-server/5855899639838.pid -daemonize -name yfMailSvr-200.200.0.14 -smp sockets=1,cores=4 -cpu core2duo,hv_spinlocks=0xffff,hv_relaxed,hv_time,hv_vapic,+sse4.1,+sse4.2,+x2apic,+erms,+smep,+fsgsbase,+f16c,+dca,+pcid,+pdcm,+xtpr,+ht,+ss,+acpi,+ds -nodefaults -vga cirrus -k en-us -boot menu=on,splash-time=8000 -m 8192 -usb -drive if=none,id=drive-ide0,media=cdrom,aio=native -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0 -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-1.qcow2,if=none,id=drive-virtio1,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-2.qcow2,if=none,id=drive-virtio2,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio2,id=virtio2,bus=pci.0,addr=0xc,bootindex=101 -netdev type=tap,id=net0,ifname=585589963983800,script=/sf/etc/kvm/vtp-bridge,vhost=on,vhostforce=on -device virtio-net-pci,romfile=,mac=FE:FC:FE:F0:AB:BA,netdev=net0,bus=pci.0,addr=0x12,id=net0 -rtc driftfix=slew,clock=rt,base=localtime -global kvm-pit.lost_tick_policy=discard -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1
-Thanks
-Sangfor VT.
-leijian
-
-Am 03.04.2015 um 12:04 hat leijian geschrieben:
->
-Hi all,
->
->
-There was a problem about qcow2 image file happened in my serval vms and I
->
-could not figure it out,
->
-so have to ask for some help.
->
-[...]
->
-I think the problem is relate to the snapshot create, delete. But I cant
->
-reproduce it .
->
-Can Anyone give a hint about how this happen?
-How did you create/delete your snapshots?
-
-More specifically, did you take care to never access your image from
-more than one process (except if both are read-only)? It happens
-occasionally that people use 'qemu-img snapshot' while the VM is
-running. This is wrong and can corrupt the image.
-
-Kevin
-
-On 04/07/2015 03:33 AM, Kevin Wolf wrote:
->
-More specifically, did you take care to never access your image from
->
-more than one process (except if both are read-only)? It happens
->
-occasionally that people use 'qemu-img snapshot' while the VM is
->
-running. This is wrong and can corrupt the image.
-Since this has been done by more than one person, I'm wondering if there
-is something we can do in the qcow2 format itself to make it harder for
-the casual user to cause corruption.  Maybe if we declare some bit or
-extension header for an image open for writing, which other readers can
-use as a warning ("this image is being actively modified; reading it may
-fail"), and other writers can use to deny access ("another process is
-already modifying this image"), where a writer should set that bit
-before writing anything else in the file, then clear it on exit.  Of
-course, you'd need a way to override the bit to actively clear it to
-recover from the case of a writer dying unexpectedly without resetting
-it normally.  And it won't help the case of a reader opening the file
-first, followed by a writer, where the reader could still get thrown off
-track.
-
-Or maybe we could document in the qcow2 format that all readers and
-writers should attempt to obtain the appropriate flock() permissions [or
-other appropriate advisory locking scheme] over the file header, so that
-cooperating processes that both use advisory locking will know when the
-file is in use by another process.
-
--- 
-Eric Blake   eblake redhat com    +1-919-301-3266
-Libvirt virtualization library
-http://libvirt.org
-signature.asc
-Description:
-OpenPGP digital signature
-
-
-I created/deleted the snapshot by using qmp command "snapshot_blkdev_internal"/"snapshot_delete_blkdev_internal", and for avoiding the case you mentioned above, I have added the flock() permission in the qemu_open().
-Here is the test of doing qemu-img snapshot to a running vm:
-Diskfile:/sf/data/36c81f660e38b3b001b183da50b477d89_f8bc123b3e74/images/host-f8bc123b3e74/4a8d8728fcdc/Devried30030.vm/vm-disk-1.qcow2 is used! errno=Resource temporarily unavailable
-Does the two cluster entry happen to be the same because of the refcount of using cluster decrease to 0 unexpectedly and  is allocated again?
-If it was not accessing the image from more than one process, any other exceptions I can test for?
-Thanks
-leijian
-From:
-Eric Blake
-Date:
-2015-04-07 23:27
-To:
-Kevin Wolf
-;
-leijian
-CC:
-qemu-devel
-;
-stefanha
-Subject:
-Re: [Qemu-devel] [Snapshot Bug?]Qcow2 meta data 
-corruption
-On 04/07/2015 03:33 AM, Kevin Wolf wrote:
-> More specifically, did you take care to never access your image from
-> more than one process (except if both are read-only)? It happens
-> occasionally that people use 'qemu-img snapshot' while the VM is
-> running. This is wrong and can corrupt the image.
-Since this has been done by more than one person, I'm wondering if there
-is something we can do in the qcow2 format itself to make it harder for
-the casual user to cause corruption.  Maybe if we declare some bit or
-extension header for an image open for writing, which other readers can
-use as a warning ("this image is being actively modified; reading it may
-fail"), and other writers can use to deny access ("another process is
-already modifying this image"), where a writer should set that bit
-before writing anything else in the file, then clear it on exit.  Of
-course, you'd need a way to override the bit to actively clear it to
-recover from the case of a writer dying unexpectedly without resetting
-it normally.  And it won't help the case of a reader opening the file
-first, followed by a writer, where the reader could still get thrown off
-track.
-Or maybe we could document in the qcow2 format that all readers and
-writers should attempt to obtain the appropriate flock() permissions [or
-other appropriate advisory locking scheme] over the file header, so that
-cooperating processes that both use advisory locking will know when the
-file is in use by another process.
---
-Eric Blake   eblake redhat com    +1-919-301-3266
-Libvirt virtualization library http://libvirt.org
-
diff --git a/results/classifier/005/other/35170175 b/results/classifier/005/other/35170175
deleted file mode 100644
index 9d4185af..00000000
--- a/results/classifier/005/other/35170175
+++ /dev/null
@@ -1,529 +0,0 @@
-other: 0.933
-graphic: 0.844
-instruction: 0.812
-semantic: 0.798
-device: 0.787
-assembly: 0.767
-boot: 0.719
-KVM: 0.709
-socket: 0.681
-network: 0.666
-mistranslation: 0.641
-vnc: 0.633
-
-[Qemu-devel] [BUG] QEMU crashes with dpdk virtio pmd
-
-Qemu crashes, with pre-condition:
-vm xml config with multiqueue, and the vm's driver virtio-net support 
-multi-queue
-
-reproduce steps:
-i. start dpdk testpmd in VM with the virtio nic
-ii. stop testpmd
-iii. reboot the VM
-
-This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
-multiqueue" is introduced.
-
-Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
-VM DPDK version:  DPDK-1.6.1
-
-Call Trace:
-#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
-#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
-#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
-#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
-#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
-#5  0x00007f6088fea32c in iter_remove_or_steal () from 
-/usr/lib64/libglib-2.0.so.0
-#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
-qom/object.c:410
-#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
-#8  object_unref (address@hidden) at qom/object.c:903
-#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
-git/qemu/exec.c:1154
-#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
-#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
-#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
-
-Call Trace:
-#0  0x00007fdccaeb9790 in ?? ()
-#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
-qom/object.c:405
-#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
-#3  object_unref (address@hidden) at qom/object.c:903
-#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
-git/qemu/exec.c:1154
-#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
-#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
-#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
-
-The q->tx_bh will free in virtio_net_del_queue() function, when remove virtio 
-queues 
-if the guest doesn't support multiqueue. But it might be still referenced by 
-others (eg . virtio_net_set_status()),
-which need so set NULL.
-
-diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
-index 7d091c9..98bd683 100644
---- a/hw/net/virtio-net.c
-+++ b/hw/net/virtio-net.c
-@@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n, int index)
-     if (q->tx_timer) {
-         timer_del(q->tx_timer);
-         timer_free(q->tx_timer);
-+        q->tx_timer = NULL;
-     } else {
-         qemu_bh_delete(q->tx_bh);
-+        q->tx_bh = NULL;
-     }
-+    q->tx_waiting = 0;
-     virtio_del_queue(vdev, index * 2 + 1);
- }
-
-From: wangyunjian 
-Sent: Monday, April 24, 2017 6:10 PM
-To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason Wang' 
-<address@hidden>
-Cc: wangyunjian <address@hidden>; caihe <address@hidden>
-Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd 
-
-Qemu crashes, with pre-condition:
-vm xml config with multiqueue, and the vm's driver virtio-net support 
-multi-queue
-
-reproduce steps:
-i. start dpdk testpmd in VM with the virtio nic
-ii. stop testpmd
-iii. reboot the VM
-
-This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
-multiqueue" is introduced.
-
-Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
-VM DPDK version:  DPDK-1.6.1
-
-Call Trace:
-#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
-#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
-#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
-#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
-#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
-#5  0x00007f6088fea32c in iter_remove_or_steal () from 
-/usr/lib64/libglib-2.0.so.0
-#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
-qom/object.c:410
-#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
-#8  object_unref (address@hidden) at qom/object.c:903
-#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
-git/qemu/exec.c:1154
-#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
-#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
-#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
-
-Call Trace:
-#0  0x00007fdccaeb9790 in ?? ()
-#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
-qom/object.c:405
-#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
-#3  object_unref (address@hidden) at qom/object.c:903
-#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
-git/qemu/exec.c:1154
-#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
-#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
-#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
-
-On 2017年04月25日 19:37, wangyunjian wrote:
-The q->tx_bh will free in virtio_net_del_queue() function, when remove virtio 
-queues
-if the guest doesn't support multiqueue. But it might be still referenced by 
-others (eg . virtio_net_set_status()),
-which need so set NULL.
-
-diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
-index 7d091c9..98bd683 100644
---- a/hw/net/virtio-net.c
-+++ b/hw/net/virtio-net.c
-@@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n, int index)
-      if (q->tx_timer) {
-          timer_del(q->tx_timer);
-          timer_free(q->tx_timer);
-+        q->tx_timer = NULL;
-      } else {
-          qemu_bh_delete(q->tx_bh);
-+        q->tx_bh = NULL;
-      }
-+    q->tx_waiting = 0;
-      virtio_del_queue(vdev, index * 2 + 1);
-  }
-Thanks a lot for the fix.
-
-Two questions:
-- If virtio_net_set_status() is the only function that may access tx_bh,
-it looks like setting tx_waiting to zero is sufficient?
-- Can you post a formal patch for this?
-
-Thanks
-From: wangyunjian
-Sent: Monday, April 24, 2017 6:10 PM
-To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason Wang' 
-<address@hidden>
-Cc: wangyunjian <address@hidden>; caihe <address@hidden>
-Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd
-
-Qemu crashes, with pre-condition:
-vm xml config with multiqueue, and the vm's driver virtio-net support 
-multi-queue
-
-reproduce steps:
-i. start dpdk testpmd in VM with the virtio nic
-ii. stop testpmd
-iii. reboot the VM
-
-This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
-multiqueue" is introduced.
-
-Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
-VM DPDK version:  DPDK-1.6.1
-
-Call Trace:
-#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
-#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
-#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
-#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
-#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
-#5  0x00007f6088fea32c in iter_remove_or_steal () from 
-/usr/lib64/libglib-2.0.so.0
-#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
-qom/object.c:410
-#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
-#8  object_unref (address@hidden) at qom/object.c:903
-#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
-git/qemu/exec.c:1154
-#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
-#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
-#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
-
-Call Trace:
-#0  0x00007fdccaeb9790 in ?? ()
-#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
-qom/object.c:405
-#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
-#3  object_unref (address@hidden) at qom/object.c:903
-#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
-git/qemu/exec.c:1154
-#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
-#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
-#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
-util/rcu.c:272
-#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
-#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
-
-CCing Paolo and Stefan, since it has a relationship with bh in Qemu.
-
->
------Original Message-----
->
-From: Jason Wang [
-mailto:address@hidden
->
->
->
-On 2017年04月25日 19:37, wangyunjian wrote:
->
-> The q->tx_bh will free in virtio_net_del_queue() function, when remove
->
-> virtio
->
-queues
->
-> if the guest doesn't support multiqueue. But it might be still referenced by
->
-others (eg . virtio_net_set_status()),
->
-> which need so set NULL.
->
->
->
-> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
->
-> index 7d091c9..98bd683 100644
->
-> --- a/hw/net/virtio-net.c
->
-> +++ b/hw/net/virtio-net.c
->
-> @@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n,
->
-int index)
->
->       if (q->tx_timer) {
->
->           timer_del(q->tx_timer);
->
->           timer_free(q->tx_timer);
->
-> +        q->tx_timer = NULL;
->
->       } else {
->
->           qemu_bh_delete(q->tx_bh);
->
-> +        q->tx_bh = NULL;
->
->       }
->
-> +    q->tx_waiting = 0;
->
->       virtio_del_queue(vdev, index * 2 + 1);
->
->   }
->
->
-Thanks a lot for the fix.
->
->
-Two questions:
->
->
-- If virtio_net_set_status() is the only function that may access tx_bh,
->
-it looks like setting tx_waiting to zero is sufficient?
-Currently yes, but we don't assure that it works for all scenarios, so
-we set the tx_bh and tx_timer to NULL to avoid to possibly access wild pointer,
-which is the common method for usage of bh in Qemu.
-
-I have another question about the root cause of this issure.
-
-This below trace is the path of setting tx_waiting to one in 
-virtio_net_handle_tx_bh() :
-
-Breakpoint 1, virtio_net_handle_tx_bh (vdev=0x0, vq=0x7f335ad13900) at 
-/data/wyj/git/qemu/hw/net/virtio-net.c:1398
-1398    {
-(gdb) bt
-#0  virtio_net_handle_tx_bh (vdev=0x0, vq=0x7f335ad13900) at 
-/data/wyj/git/qemu/hw/net/virtio-net.c:1398
-#1  0x00007f3357bddf9c in virtio_bus_set_host_notifier (bus=<optimized out>, 
-address@hidden, address@hidden) at hw/virtio/virtio-bus.c:297
-#2  0x00007f3357a0055d in vhost_dev_disable_notifiers (address@hidden, 
-address@hidden) at /data/wyj/git/qemu/hw/virtio/vhost.c:1422
-#3  0x00007f33579e3373 in vhost_net_stop_one (net=0x7f335ad84dc0, 
-dev=0x7f335c6f5f90) at /data/wyj/git/qemu/hw/net/vhost_net.c:289
-#4  0x00007f33579e385b in vhost_net_stop (address@hidden, ncs=<optimized out>, 
-address@hidden) at /data/wyj/git/qemu/hw/net/vhost_net.c:367
-#5  0x00007f33579e15de in virtio_net_vhost_status (status=<optimized out>, 
-n=0x7f335c6f5f90) at /data/wyj/git/qemu/hw/net/virtio-net.c:176
-#6  virtio_net_set_status (vdev=0x7f335c6f5f90, status=0 '\000') at 
-/data/wyj/git/qemu/hw/net/virtio-net.c:250
-#7  0x00007f33579f8dc6 in virtio_set_status (address@hidden, address@hidden 
-'\000') at /data/wyj/git/qemu/hw/virtio/virtio.c:1146
-#8  0x00007f3357bdd3cc in virtio_ioport_write (val=0, addr=18, 
-opaque=0x7f335c6eda80) at hw/virtio/virtio-pci.c:387
-#9  virtio_pci_config_write (opaque=0x7f335c6eda80, addr=18, val=0, 
-size=<optimized out>) at hw/virtio/virtio-pci.c:511
-#10 0x00007f33579b2155 in memory_region_write_accessor (mr=0x7f335c6ee470, 
-addr=18, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized 
-out>, attrs=...) at /data/wyj/git/qemu/memory.c:526
-#11 0x00007f33579af2e9 in access_with_adjusted_size (address@hidden, 
-address@hidden, address@hidden, access_size_min=<optimized out>, 
-access_size_max=<optimized out>, address@hidden
-    0x7f33579b20f0 <memory_region_write_accessor>, address@hidden, 
-address@hidden) at /data/wyj/git/qemu/memory.c:592
-#12 0x00007f33579b2e15 in memory_region_dispatch_write (address@hidden, 
-address@hidden, data=0, address@hidden, address@hidden) at 
-/data/wyj/git/qemu/memory.c:1319
-#13 0x00007f335796cd93 in address_space_write_continue (mr=0x7f335c6ee470, l=1, 
-addr1=18, len=1, buf=0x7f335773d000 "", attrs=..., addr=49170, 
-as=0x7f3358317060 <address_space_io>) at /data/wyj/git/qemu/exec.c:2834
-#14 address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., 
-buf=<optimized out>, len=<optimized out>) at /data/wyj/git/qemu/exec.c:2879
-#15 0x00007f335796d3ad in address_space_rw (as=<optimized out>, address@hidden, 
-attrs=..., address@hidden, buf=<optimized out>, address@hidden, address@hidden) 
-at /data/wyj/git/qemu/exec.c:2981
-#16 0x00007f33579ae226 in kvm_handle_io (count=1, size=1, direction=<optimized 
-out>, data=<optimized out>, attrs=..., port=49170) at 
-/data/wyj/git/qemu/kvm-all.c:1803
-#17 kvm_cpu_exec (address@hidden) at /data/wyj/git/qemu/kvm-all.c:2032
-#18 0x00007f335799b632 in qemu_kvm_cpu_thread_fn (arg=0x7f335ae82070) at 
-/data/wyj/git/qemu/cpus.c:1118
-#19 0x00007f3352983dc5 in start_thread () from /usr/lib64/libpthread.so.0
-#20 0x00007f335113571d in clone () from /usr/lib64/libc.so.6
-
-It calls qemu_bh_schedule(q->tx_bh) at the bottom of virtio_net_handle_tx_bh(),
-I don't know why virtio_net_tx_bh() doesn't be invoked, so that the 
-q->tx_waiting is not zero.
-[ps: we added logs in virtio_net_tx_bh() to verify that]
-
-Some other information: 
-
-It won't crash if we don't use vhost-net.
-
-
-Thanks,
--Gonglei
-
->
-- Can you post a formal patch for this?
->
->
-Thanks
->
->
-> From: wangyunjian
->
-> Sent: Monday, April 24, 2017 6:10 PM
->
-> To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason
->
-Wang' <address@hidden>
->
-> Cc: wangyunjian <address@hidden>; caihe <address@hidden>
->
-> Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd
->
->
->
-> Qemu crashes, with pre-condition:
->
-> vm xml config with multiqueue, and the vm's driver virtio-net support
->
-multi-queue
->
->
->
-> reproduce steps:
->
-> i. start dpdk testpmd in VM with the virtio nic
->
-> ii. stop testpmd
->
-> iii. reboot the VM
->
->
->
-> This commit "f9d6dbf0  remove virtio queues if the guest doesn't support
->
-multiqueue" is introduced.
->
->
->
-> Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
->
-> VM DPDK version:  DPDK-1.6.1
->
->
->
-> Call Trace:
->
-> #0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
->
-> #1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
->
-> #2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
->
-> #3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
->
-> #4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
->
-> #5  0x00007f6088fea32c in iter_remove_or_steal () from
->
-/usr/lib64/libglib-2.0.so.0
->
-> #6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800)
->
-at qom/object.c:410
->
-> #7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
->
-> #8  object_unref (address@hidden) at qom/object.c:903
->
-> #9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at
->
-git/qemu/exec.c:1154
->
-> #10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
->
-> #11 address_space_dispatch_free (d=0x7f6090b72b90) at
->
-git/qemu/exec.c:2514
->
-> #12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at
->
-util/rcu.c:272
->
-> #13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
->
-> #14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
->
->
->
-> Call Trace:
->
-> #0  0x00007fdccaeb9790 in ?? ()
->
-> #1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at
->
-qom/object.c:405
->
-> #2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
->
-> #3  object_unref (address@hidden) at qom/object.c:903
->
-> #4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at
->
-git/qemu/exec.c:1154
->
-> #5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
->
-> #6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at
->
-git/qemu/exec.c:2514
->
-> #7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at
->
-util/rcu.c:272
->
-> #8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
->
-> #9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
->
->
->
->
-
-On 25/04/2017 14:02, Jason Wang wrote:
->
->
-Thanks a lot for the fix.
->
->
-Two questions:
->
->
-- If virtio_net_set_status() is the only function that may access tx_bh,
->
-it looks like setting tx_waiting to zero is sufficient?
-I think clearing tx_bh is better anyway, as leaving a dangling pointer
-is not very hygienic.
-
-Paolo
-
->
-- Can you post a formal patch for this?
-
diff --git a/results/classifier/005/other/42974450 b/results/classifier/005/other/42974450
deleted file mode 100644
index 05f9acca..00000000
--- a/results/classifier/005/other/42974450
+++ /dev/null
@@ -1,437 +0,0 @@
-other: 0.940
-device: 0.921
-instruction: 0.920
-semantic: 0.917
-assembly: 0.917
-boot: 0.909
-network: 0.907
-graphic: 0.906
-KVM: 0.901
-socket: 0.899
-mistranslation: 0.882
-vnc: 0.869
-
-[Bug Report] Possible Missing Endianness Conversion
-
-The virtio packed virtqueue support patch[1] suggests converting
-endianness by lines:
-
-virtio_tswap16s(vdev, &e->off_wrap);
-virtio_tswap16s(vdev, &e->flags);
-
-Though both of these conversion statements aren't present in the
-latest qemu code here[2]
-
-Is this intentional?
-
-[1]:
-https://mail.gnu.org/archive/html/qemu-block/2019-10/msg01492.html
-[2]:
-https://elixir.bootlin.com/qemu/latest/source/hw/virtio/virtio.c#L314
-
-CCing Jason.
-
-On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
->
->
-The virtio packed virtqueue support patch[1] suggests converting
->
-endianness by lines:
->
->
-virtio_tswap16s(vdev, &e->off_wrap);
->
-virtio_tswap16s(vdev, &e->flags);
->
->
-Though both of these conversion statements aren't present in the
->
-latest qemu code here[2]
->
->
-Is this intentional?
-Good catch!
-
-It looks like it was removed (maybe by mistake) by commit
-d152cdd6f6 ("virtio: use virtio accessor to access packed event")
-
-Jason can you confirm that?
-
-Thanks,
-Stefano
-
->
->
-[1]:
-https://mail.gnu.org/archive/html/qemu-block/2019-10/msg01492.html
->
-[2]:
-https://elixir.bootlin.com/qemu/latest/source/hw/virtio/virtio.c#L314
->
-
-On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
->
->
-CCing Jason.
->
->
-On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
->
->
->
-> The virtio packed virtqueue support patch[1] suggests converting
->
-> endianness by lines:
->
->
->
-> virtio_tswap16s(vdev, &e->off_wrap);
->
-> virtio_tswap16s(vdev, &e->flags);
->
->
->
-> Though both of these conversion statements aren't present in the
->
-> latest qemu code here[2]
->
->
->
-> Is this intentional?
->
->
-Good catch!
->
->
-It looks like it was removed (maybe by mistake) by commit
->
-d152cdd6f6 ("virtio: use virtio accessor to access packed event")
-That commit changes from:
-
--    address_space_read_cached(cache, off_off, &e->off_wrap,
--                              sizeof(e->off_wrap));
--    virtio_tswap16s(vdev, &e->off_wrap);
-
-which does a byte read of 2 bytes and then swaps the bytes
-depending on the host endianness and the value of
-virtio_access_is_big_endian()
-
-to this:
-
-+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
-
-virtio_lduw_phys_cached() is a small function which calls
-either lduw_be_phys_cached() or lduw_le_phys_cached()
-depending on the value of virtio_access_is_big_endian().
-(And lduw_be_phys_cached() and lduw_le_phys_cached() do
-the right thing for the host-endianness to do a "load
-a specifically big or little endian 16-bit value".)
-
-Which is to say that because we use a load/store function that's
-explicit about the size of the data type it is accessing, the
-function itself can handle doing the load as big or little
-endian, rather than the calling code having to do a manual swap after
-it has done a load-as-bag-of-bytes. This is generally preferable
-as it's less error-prone.
-
-(Explicit swap-after-loading still has a place where the
-code is doing a load of a whole structure out of the
-guest and then swapping each struct field after the fact,
-because it means we can do a single load-from-guest-memory
-rather than a whole sequence of calls all the way down
-through the memory subsystem.)
-
-thanks
--- PMM
-
-On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
-On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
-CCing Jason.
-
-On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
->
-> The virtio packed virtqueue support patch[1] suggests converting
-> endianness by lines:
->
-> virtio_tswap16s(vdev, &e->off_wrap);
-> virtio_tswap16s(vdev, &e->flags);
->
-> Though both of these conversion statements aren't present in the
-> latest qemu code here[2]
->
-> Is this intentional?
-
-Good catch!
-
-It looks like it was removed (maybe by mistake) by commit
-d152cdd6f6 ("virtio: use virtio accessor to access packed event")
-That commit changes from:
-
--    address_space_read_cached(cache, off_off, &e->off_wrap,
--                              sizeof(e->off_wrap));
--    virtio_tswap16s(vdev, &e->off_wrap);
-
-which does a byte read of 2 bytes and then swaps the bytes
-depending on the host endianness and the value of
-virtio_access_is_big_endian()
-
-to this:
-
-+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
-
-virtio_lduw_phys_cached() is a small function which calls
-either lduw_be_phys_cached() or lduw_le_phys_cached()
-depending on the value of virtio_access_is_big_endian().
-(And lduw_be_phys_cached() and lduw_le_phys_cached() do
-the right thing for the host-endianness to do a "load
-a specifically big or little endian 16-bit value".)
-
-Which is to say that because we use a load/store function that's
-explicit about the size of the data type it is accessing, the
-function itself can handle doing the load as big or little
-endian, rather than the calling code having to do a manual swap after
-it has done a load-as-bag-of-bytes. This is generally preferable
-as it's less error-prone.
-Thanks for the details!
-
-So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
-
-I mean:
-diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
-index 893a072c9d..2e5e67bdb9 100644
---- a/hw/virtio/virtio.c
-+++ b/hw/virtio/virtio.c
-@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
-     /* Make sure flags is seen before off_wrap */
-     smp_rmb();
-     e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
--    virtio_tswap16s(vdev, &e->flags);
- }
-
- static void vring_packed_off_wrap_write(VirtIODevice *vdev,
-
-Thanks,
-Stefano
-(Explicit swap-after-loading still has a place where the
-code is doing a load of a whole structure out of the
-guest and then swapping each struct field after the fact,
-because it means we can do a single load-from-guest-memory
-rather than a whole sequence of calls all the way down
-through the memory subsystem.)
-
-thanks
--- PMM
-
-On Tue, 25 Jun 2024 at 08:18, Stefano Garzarella <sgarzare@redhat.com> wrote:
->
->
-On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
->
->On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
->
->>
->
->> CCing Jason.
->
->>
->
->> On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
->
->> >
->
->> > The virtio packed virtqueue support patch[1] suggests converting
->
->> > endianness by lines:
->
->> >
->
->> > virtio_tswap16s(vdev, &e->off_wrap);
->
->> > virtio_tswap16s(vdev, &e->flags);
->
->> >
->
->> > Though both of these conversion statements aren't present in the
->
->> > latest qemu code here[2]
->
->> >
->
->> > Is this intentional?
->
->>
->
->> Good catch!
->
->>
->
->> It looks like it was removed (maybe by mistake) by commit
->
->> d152cdd6f6 ("virtio: use virtio accessor to access packed event")
->
->
->
->That commit changes from:
->
->
->
->-    address_space_read_cached(cache, off_off, &e->off_wrap,
->
->-                              sizeof(e->off_wrap));
->
->-    virtio_tswap16s(vdev, &e->off_wrap);
->
->
->
->which does a byte read of 2 bytes and then swaps the bytes
->
->depending on the host endianness and the value of
->
->virtio_access_is_big_endian()
->
->
->
->to this:
->
->
->
->+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
->
->
->
->virtio_lduw_phys_cached() is a small function which calls
->
->either lduw_be_phys_cached() or lduw_le_phys_cached()
->
->depending on the value of virtio_access_is_big_endian().
->
->(And lduw_be_phys_cached() and lduw_le_phys_cached() do
->
->the right thing for the host-endianness to do a "load
->
->a specifically big or little endian 16-bit value".)
->
->
->
->Which is to say that because we use a load/store function that's
->
->explicit about the size of the data type it is accessing, the
->
->function itself can handle doing the load as big or little
->
->endian, rather than the calling code having to do a manual swap after
->
->it has done a load-as-bag-of-bytes. This is generally preferable
->
->as it's less error-prone.
->
->
-Thanks for the details!
->
->
-So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
->
->
-I mean:
->
-diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
->
-index 893a072c9d..2e5e67bdb9 100644
->
---- a/hw/virtio/virtio.c
->
-+++ b/hw/virtio/virtio.c
->
-@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
->
-/* Make sure flags is seen before off_wrap */
->
-smp_rmb();
->
-e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
->
--    virtio_tswap16s(vdev, &e->flags);
->
-}
-That definitely looks like it's probably not correct...
-
--- PMM
-
-On Fri, Jun 28, 2024 at 03:53:09PM GMT, Peter Maydell wrote:
-On Tue, 25 Jun 2024 at 08:18, Stefano Garzarella <sgarzare@redhat.com> wrote:
-On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
->On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
->>
->> CCing Jason.
->>
->> On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
->> >
->> > The virtio packed virtqueue support patch[1] suggests converting
->> > endianness by lines:
->> >
->> > virtio_tswap16s(vdev, &e->off_wrap);
->> > virtio_tswap16s(vdev, &e->flags);
->> >
->> > Though both of these conversion statements aren't present in the
->> > latest qemu code here[2]
->> >
->> > Is this intentional?
->>
->> Good catch!
->>
->> It looks like it was removed (maybe by mistake) by commit
->> d152cdd6f6 ("virtio: use virtio accessor to access packed event")
->
->That commit changes from:
->
->-    address_space_read_cached(cache, off_off, &e->off_wrap,
->-                              sizeof(e->off_wrap));
->-    virtio_tswap16s(vdev, &e->off_wrap);
->
->which does a byte read of 2 bytes and then swaps the bytes
->depending on the host endianness and the value of
->virtio_access_is_big_endian()
->
->to this:
->
->+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
->
->virtio_lduw_phys_cached() is a small function which calls
->either lduw_be_phys_cached() or lduw_le_phys_cached()
->depending on the value of virtio_access_is_big_endian().
->(And lduw_be_phys_cached() and lduw_le_phys_cached() do
->the right thing for the host-endianness to do a "load
->a specifically big or little endian 16-bit value".)
->
->Which is to say that because we use a load/store function that's
->explicit about the size of the data type it is accessing, the
->function itself can handle doing the load as big or little
->endian, rather than the calling code having to do a manual swap after
->it has done a load-as-bag-of-bytes. This is generally preferable
->as it's less error-prone.
-
-Thanks for the details!
-
-So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
-
-I mean:
-diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
-index 893a072c9d..2e5e67bdb9 100644
---- a/hw/virtio/virtio.c
-+++ b/hw/virtio/virtio.c
-@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
-      /* Make sure flags is seen before off_wrap */
-      smp_rmb();
-      e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
--    virtio_tswap16s(vdev, &e->flags);
-  }
-That definitely looks like it's probably not correct...
-Yeah, I just sent that patch:
-20240701075208.19634-1-sgarzare@redhat.com
-">https://lore.kernel.org/qemu-devel/
-20240701075208.19634-1-sgarzare@redhat.com
-We can continue the discussion there.
-
-Thanks,
-Stefano
-
diff --git a/results/classifier/005/other/55247116 b/results/classifier/005/other/55247116
deleted file mode 100644
index a42111a5..00000000
--- a/results/classifier/005/other/55247116
+++ /dev/null
@@ -1,1318 +0,0 @@
-other: 0.945
-assembly: 0.938
-graphic: 0.933
-socket: 0.929
-semantic: 0.928
-instruction: 0.928
-device: 0.919
-boot: 0.918
-network: 0.916
-vnc: 0.916
-KVM: 0.894
-mistranslation: 0.841
-
-[Qemu-devel]  [RFC/BUG] xen-mapcache: buggy invalidate map cache?
-
-Hi,
-
-In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
-instead of first level entry (if map to rom other than guest memory
-comes first), while in xen_invalidate_map_cache(), when VM ballooned
-out memory, qemu did not invalidate cache entries in linked
-list(entry->next), so when VM balloon back in memory, gfns probably
-mapped to different mfns, thus if guest asks device to DMA to these
-GPA, qemu may DMA to stale MFNs.
-
-So I think in xen_invalidate_map_cache() linked lists should also be
-checked and invalidated.
-
-What’s your opinion? Is this a bug? Is my analyze correct?
-
-On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-Hi,
->
->
-In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
-instead of first level entry (if map to rom other than guest memory
->
-comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
-out memory, qemu did not invalidate cache entries in linked
->
-list(entry->next), so when VM balloon back in memory, gfns probably
->
-mapped to different mfns, thus if guest asks device to DMA to these
->
-GPA, qemu may DMA to stale MFNs.
->
->
-So I think in xen_invalidate_map_cache() linked lists should also be
->
-checked and invalidated.
->
->
-What’s your opinion? Is this a bug? Is my analyze correct?
-Added Jun Nakajima and Alexander Graf
-
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> Hi,
->
->
->
-> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
-> instead of first level entry (if map to rom other than guest memory
->
-> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
-> out memory, qemu did not invalidate cache entries in linked
->
-> list(entry->next), so when VM balloon back in memory, gfns probably
->
-> mapped to different mfns, thus if guest asks device to DMA to these
->
-> GPA, qemu may DMA to stale MFNs.
->
->
->
-> So I think in xen_invalidate_map_cache() linked lists should also be
->
-> checked and invalidated.
->
->
->
-> What’s your opinion? Is this a bug? Is my analyze correct?
->
->
-Added Jun Nakajima and Alexander Graf
-And correct Stefano Stabellini's email address.
-
-On Mon, 10 Apr 2017 00:36:02 +0800
-hrg <address@hidden> wrote:
-
-Hi,
-
->
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
->> Hi,
->
->>
->
->> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
->> instead of first level entry (if map to rom other than guest memory
->
->> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
->> out memory, qemu did not invalidate cache entries in linked
->
->> list(entry->next), so when VM balloon back in memory, gfns probably
->
->> mapped to different mfns, thus if guest asks device to DMA to these
->
->> GPA, qemu may DMA to stale MFNs.
->
->>
->
->> So I think in xen_invalidate_map_cache() linked lists should also be
->
->> checked and invalidated.
->
->>
->
->> What’s your opinion? Is this a bug? Is my analyze correct?
->
->
->
-> Added Jun Nakajima and Alexander Graf
->
-And correct Stefano Stabellini's email address.
-There is a real issue with the xen-mapcache corruption in fact. I encountered
-it a few months ago while experimenting with Q35 support on Xen. Q35 emulation
-uses an AHCI controller by default, along with NCQ mode enabled. The issue can
-be (somewhat) easily reproduced there, though using a normal i440 emulation
-might possibly allow to reproduce the issue as well, using a dedicated test
-code from a guest side. In case of Q35+NCQ the issue can be reproduced "as is".
-
-The issue occurs when a guest domain performs an intensive disk I/O, ex. while
-guest OS booting. QEMU crashes with "Bad ram offset 980aa000"
-message logged, where the address is different each time. The hard thing with
-this issue is that it has a very low reproducibility rate.
-
-The corruption happens when there are multiple I/O commands in the NCQ queue.
-So there are overlapping emulated DMA operations in flight and QEMU uses a
-sequence of mapcache actions which can be executed in the "wrong" order thus
-leading to an inconsistent xen-mapcache - so a bad address from the wrong
-entry is returned.
-
-The bad thing with this issue is that QEMU crash due to "Bad ram offset"
-appearance is a relatively good situation in the sense that this is a caught
-error. But there might be a much worse (artificial) situation where the returned
-address looks valid but points to a different mapped memory.
-
-The fix itself is not hard (ex. an additional checked field in MapCacheEntry),
-but there is a need of some reliable way to test it considering the low
-reproducibility rate.
-
-Regards,
-Alex
-
-On Mon, 10 Apr 2017, hrg wrote:
->
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
->> Hi,
->
->>
->
->> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
->> instead of first level entry (if map to rom other than guest memory
->
->> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
->> out memory, qemu did not invalidate cache entries in linked
->
->> list(entry->next), so when VM balloon back in memory, gfns probably
->
->> mapped to different mfns, thus if guest asks device to DMA to these
->
->> GPA, qemu may DMA to stale MFNs.
->
->>
->
->> So I think in xen_invalidate_map_cache() linked lists should also be
->
->> checked and invalidated.
->
->>
->
->> What’s your opinion? Is this a bug? Is my analyze correct?
-Yes, you are right. We need to go through the list for each element of
-the array in xen_invalidate_map_cache. Can you come up with a patch?
-
-On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-On Mon, 10 Apr 2017, hrg wrote:
->
-> On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> >> Hi,
->
-> >>
->
-> >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
-> >> instead of first level entry (if map to rom other than guest memory
->
-> >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
-> >> out memory, qemu did not invalidate cache entries in linked
->
-> >> list(entry->next), so when VM balloon back in memory, gfns probably
->
-> >> mapped to different mfns, thus if guest asks device to DMA to these
->
-> >> GPA, qemu may DMA to stale MFNs.
->
-> >>
->
-> >> So I think in xen_invalidate_map_cache() linked lists should also be
->
-> >> checked and invalidated.
->
-> >>
->
-> >> What’s your opinion? Is this a bug? Is my analyze correct?
->
->
-Yes, you are right. We need to go through the list for each element of
->
-the array in xen_invalidate_map_cache. Can you come up with a patch?
-I spoke too soon. In the regular case there should be no locked mappings
-when xen_invalidate_map_cache is called (see the DPRINTF warning at the
-beginning of the functions). Without locked mappings, there should never
-be more than one element in each list (see xen_map_cache_unlocked:
-entry->lock == true is a necessary condition to append a new entry to
-the list, otherwise it is just remapped).
-
-Can you confirm that what you are seeing are locked mappings
-when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
-by turning it into a printf or by defininig MAPCACHE_DEBUG.
-
-On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
-<address@hidden> wrote:
->
-On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-> On Mon, 10 Apr 2017, hrg wrote:
->
-> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> > >> Hi,
->
-> > >>
->
-> > >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
-> > >> instead of first level entry (if map to rom other than guest memory
->
-> > >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
-> > >> out memory, qemu did not invalidate cache entries in linked
->
-> > >> list(entry->next), so when VM balloon back in memory, gfns probably
->
-> > >> mapped to different mfns, thus if guest asks device to DMA to these
->
-> > >> GPA, qemu may DMA to stale MFNs.
->
-> > >>
->
-> > >> So I think in xen_invalidate_map_cache() linked lists should also be
->
-> > >> checked and invalidated.
->
-> > >>
->
-> > >> What’s your opinion? Is this a bug? Is my analyze correct?
->
->
->
-> Yes, you are right. We need to go through the list for each element of
->
-> the array in xen_invalidate_map_cache. Can you come up with a patch?
->
->
-I spoke too soon. In the regular case there should be no locked mappings
->
-when xen_invalidate_map_cache is called (see the DPRINTF warning at the
->
-beginning of the functions). Without locked mappings, there should never
->
-be more than one element in each list (see xen_map_cache_unlocked:
->
-entry->lock == true is a necessary condition to append a new entry to
->
-the list, otherwise it is just remapped).
->
->
-Can you confirm that what you are seeing are locked mappings
->
-when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
->
-by turning it into a printf or by defininig MAPCACHE_DEBUG.
-In fact, I think the DPRINTF above is incorrect too. In
-pci_add_option_rom(), rtl8139 rom is locked mapped in
-pci_add_option_rom->memory_region_get_ram_ptr (after
-memory_region_init_ram). So actually I think we should remove the
-DPRINTF warning as it is normal.
-
-On Tue, 11 Apr 2017, hrg wrote:
->
-On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
->
-<address@hidden> wrote:
->
-> On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
->> On Mon, 10 Apr 2017, hrg wrote:
->
->> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
->> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
->> > >> Hi,
->
->> > >>
->
->> > >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
->
->> > >> instead of first level entry (if map to rom other than guest memory
->
->> > >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
->
->> > >> out memory, qemu did not invalidate cache entries in linked
->
->> > >> list(entry->next), so when VM balloon back in memory, gfns probably
->
->> > >> mapped to different mfns, thus if guest asks device to DMA to these
->
->> > >> GPA, qemu may DMA to stale MFNs.
->
->> > >>
->
->> > >> So I think in xen_invalidate_map_cache() linked lists should also be
->
->> > >> checked and invalidated.
->
->> > >>
->
->> > >> What’s your opinion? Is this a bug? Is my analyze correct?
->
->>
->
->> Yes, you are right. We need to go through the list for each element of
->
->> the array in xen_invalidate_map_cache. Can you come up with a patch?
->
->
->
-> I spoke too soon. In the regular case there should be no locked mappings
->
-> when xen_invalidate_map_cache is called (see the DPRINTF warning at the
->
-> beginning of the functions). Without locked mappings, there should never
->
-> be more than one element in each list (see xen_map_cache_unlocked:
->
-> entry->lock == true is a necessary condition to append a new entry to
->
-> the list, otherwise it is just remapped).
->
->
->
-> Can you confirm that what you are seeing are locked mappings
->
-> when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
->
-> by turning it into a printf or by defininig MAPCACHE_DEBUG.
->
->
-In fact, I think the DPRINTF above is incorrect too. In
->
-pci_add_option_rom(), rtl8139 rom is locked mapped in
->
-pci_add_option_rom->memory_region_get_ram_ptr (after
->
-memory_region_init_ram). So actually I think we should remove the
->
-DPRINTF warning as it is normal.
-Let me explain why the DPRINTF warning is there: emulated dma operations
-can involve locked mappings. Once a dma operation completes, the related
-mapping is unlocked and can be safely destroyed. But if we destroy a
-locked mapping in xen_invalidate_map_cache, while a dma is still
-ongoing, QEMU will crash. We cannot handle that case.
-
-However, the scenario you described is different. It has nothing to do
-with DMA. It looks like pci_add_option_rom calls
-memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
-locked mapping and it is never unlocked or destroyed.
-
-It looks like "ptr" is not used after pci_add_option_rom returns. Does
-the append patch fix the problem you are seeing? For the proper fix, I
-think we probably need some sort of memory_region_unmap wrapper or maybe
-a call to address_space_unmap.
-
-
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
-index e6b08e1..04f98b7 100644
---- a/hw/pci/pci.c
-+++ b/hw/pci/pci.c
-@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool 
-is_default_rom,
-     }
- 
-     pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
-+    xen_invalidate_map_cache_entry(ptr);
- }
- 
- static void pci_del_option_rom(PCIDevice *pdev)
-
-On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
-Stefano Stabellini <address@hidden> wrote:
-
->
-On Tue, 11 Apr 2017, hrg wrote:
->
-> On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
->
-> <address@hidden> wrote:
->
-> > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-> >> On Mon, 10 Apr 2017, hrg wrote:
->
-> >> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> >> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> >> > >> Hi,
->
-> >> > >>
->
-> >> > >> In xen_map_cache_unlocked(), map to guest memory maybe in
->
-> >> > >> entry->next instead of first level entry (if map to rom other than
->
-> >> > >> guest memory comes first), while in xen_invalidate_map_cache(),
->
-> >> > >> when VM ballooned out memory, qemu did not invalidate cache entries
->
-> >> > >> in linked list(entry->next), so when VM balloon back in memory,
->
-> >> > >> gfns probably mapped to different mfns, thus if guest asks device
->
-> >> > >> to DMA to these GPA, qemu may DMA to stale MFNs.
->
-> >> > >>
->
-> >> > >> So I think in xen_invalidate_map_cache() linked lists should also be
->
-> >> > >> checked and invalidated.
->
-> >> > >>
->
-> >> > >> What’s your opinion? Is this a bug? Is my analyze correct?
->
-> >>
->
-> >> Yes, you are right. We need to go through the list for each element of
->
-> >> the array in xen_invalidate_map_cache. Can you come up with a patch?
->
-> >
->
-> > I spoke too soon. In the regular case there should be no locked mappings
->
-> > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
->
-> > beginning of the functions). Without locked mappings, there should never
->
-> > be more than one element in each list (see xen_map_cache_unlocked:
->
-> > entry->lock == true is a necessary condition to append a new entry to
->
-> > the list, otherwise it is just remapped).
->
-> >
->
-> > Can you confirm that what you are seeing are locked mappings
->
-> > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
->
-> > by turning it into a printf or by defininig MAPCACHE_DEBUG.
->
->
->
-> In fact, I think the DPRINTF above is incorrect too. In
->
-> pci_add_option_rom(), rtl8139 rom is locked mapped in
->
-> pci_add_option_rom->memory_region_get_ram_ptr (after
->
-> memory_region_init_ram). So actually I think we should remove the
->
-> DPRINTF warning as it is normal.
->
->
-Let me explain why the DPRINTF warning is there: emulated dma operations
->
-can involve locked mappings. Once a dma operation completes, the related
->
-mapping is unlocked and can be safely destroyed. But if we destroy a
->
-locked mapping in xen_invalidate_map_cache, while a dma is still
->
-ongoing, QEMU will crash. We cannot handle that case.
->
->
-However, the scenario you described is different. It has nothing to do
->
-with DMA. It looks like pci_add_option_rom calls
->
-memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
->
-locked mapping and it is never unlocked or destroyed.
->
->
-It looks like "ptr" is not used after pci_add_option_rom returns. Does
->
-the append patch fix the problem you are seeing? For the proper fix, I
->
-think we probably need some sort of memory_region_unmap wrapper or maybe
->
-a call to address_space_unmap.
-Hmm, for some reason my message to the Xen-devel list got rejected but was sent
-to Qemu-devel instead, without any notice. Sorry if I'm missing something
-obvious as a list newbie.
-
-Stefano, hrg,
-
-There is an issue with inconsistency between the list of normal MapCacheEntry's
-and their 'reverse' counterparts - MapCacheRev's in locked_entries.
-When bad situation happens, there are multiple (locked) MapCacheEntry
-entries in the bucket's linked list along with a number of MapCacheRev's. And
-when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
-first list and calculates a wrong pointer from it which may then be caught with
-the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
-this issue as well I think.
-
-I'll try to provide a test code which can reproduce the issue from the
-guest side using an emulated IDE controller, though it's much simpler to achieve
-this result with an AHCI controller using multiple NCQ I/O commands. So far I've
-seen this issue only with Windows 7 (and above) guest on AHCI, but any block I/O
-DMA should be enough I think.
-
-On 2017/4/12 14:17, Alexey G wrote:
-On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
-Stefano Stabellini <address@hidden> wrote:
-On Tue, 11 Apr 2017, hrg wrote:
-On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
-<address@hidden> wrote:
-On Mon, 10 Apr 2017, Stefano Stabellini wrote:
-On Mon, 10 Apr 2017, hrg wrote:
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
-On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
-Hi,
-
-In xen_map_cache_unlocked(), map to guest memory maybe in
-entry->next instead of first level entry (if map to rom other than
-guest memory comes first), while in xen_invalidate_map_cache(),
-when VM ballooned out memory, qemu did not invalidate cache entries
-in linked list(entry->next), so when VM balloon back in memory,
-gfns probably mapped to different mfns, thus if guest asks device
-to DMA to these GPA, qemu may DMA to stale MFNs.
-
-So I think in xen_invalidate_map_cache() linked lists should also be
-checked and invalidated.
-
-What’s your opinion? Is this a bug? Is my analyze correct?
-Yes, you are right. We need to go through the list for each element of
-the array in xen_invalidate_map_cache. Can you come up with a patch?
-I spoke too soon. In the regular case there should be no locked mappings
-when xen_invalidate_map_cache is called (see the DPRINTF warning at the
-beginning of the functions). Without locked mappings, there should never
-be more than one element in each list (see xen_map_cache_unlocked:
-entry->lock == true is a necessary condition to append a new entry to
-the list, otherwise it is just remapped).
-
-Can you confirm that what you are seeing are locked mappings
-when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
-by turning it into a printf or by defininig MAPCACHE_DEBUG.
-In fact, I think the DPRINTF above is incorrect too. In
-pci_add_option_rom(), rtl8139 rom is locked mapped in
-pci_add_option_rom->memory_region_get_ram_ptr (after
-memory_region_init_ram). So actually I think we should remove the
-DPRINTF warning as it is normal.
-Let me explain why the DPRINTF warning is there: emulated dma operations
-can involve locked mappings. Once a dma operation completes, the related
-mapping is unlocked and can be safely destroyed. But if we destroy a
-locked mapping in xen_invalidate_map_cache, while a dma is still
-ongoing, QEMU will crash. We cannot handle that case.
-
-However, the scenario you described is different. It has nothing to do
-with DMA. It looks like pci_add_option_rom calls
-memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
-locked mapping and it is never unlocked or destroyed.
-
-It looks like "ptr" is not used after pci_add_option_rom returns. Does
-the append patch fix the problem you are seeing? For the proper fix, I
-think we probably need some sort of memory_region_unmap wrapper or maybe
-a call to address_space_unmap.
-Hmm, for some reason my message to the Xen-devel list got rejected but was sent
-to Qemu-devel instead, without any notice. Sorry if I'm missing something
-obvious as a list newbie.
-
-Stefano, hrg,
-
-There is an issue with inconsistency between the list of normal MapCacheEntry's
-and their 'reverse' counterparts - MapCacheRev's in locked_entries.
-When bad situation happens, there are multiple (locked) MapCacheEntry
-entries in the bucket's linked list along with a number of MapCacheRev's. And
-when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
-first list and calculates a wrong pointer from it which may then be caught with
-the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
-this issue as well I think.
-
-I'll try to provide a test code which can reproduce the issue from the
-guest side using an emulated IDE controller, though it's much simpler to achieve
-this result with an AHCI controller using multiple NCQ I/O commands. So far I've
-seen this issue only with Windows 7 (and above) guest on AHCI, but any block I/O
-DMA should be enough I think.
-Yes, I think there may be other bugs lurking, considering the complexity, 
-though we need to reproduce it if we want to delve into it.
-
-On Wed, 12 Apr 2017, Alexey G wrote:
->
-On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
->
-Stefano Stabellini <address@hidden> wrote:
->
->
-> On Tue, 11 Apr 2017, hrg wrote:
->
-> > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
->
-> > <address@hidden> wrote:
->
-> > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-> > >> On Mon, 10 Apr 2017, hrg wrote:
->
-> > >> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> > >> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> > >> > >> Hi,
->
-> > >> > >>
->
-> > >> > >> In xen_map_cache_unlocked(), map to guest memory maybe in
->
-> > >> > >> entry->next instead of first level entry (if map to rom other than
->
-> > >> > >> guest memory comes first), while in xen_invalidate_map_cache(),
->
-> > >> > >> when VM ballooned out memory, qemu did not invalidate cache
->
-> > >> > >> entries
->
-> > >> > >> in linked list(entry->next), so when VM balloon back in memory,
->
-> > >> > >> gfns probably mapped to different mfns, thus if guest asks device
->
-> > >> > >> to DMA to these GPA, qemu may DMA to stale MFNs.
->
-> > >> > >>
->
-> > >> > >> So I think in xen_invalidate_map_cache() linked lists should also
->
-> > >> > >> be
->
-> > >> > >> checked and invalidated.
->
-> > >> > >>
->
-> > >> > >> What’s your opinion? Is this a bug? Is my analyze correct?
->
-> > >>
->
-> > >> Yes, you are right. We need to go through the list for each element of
->
-> > >> the array in xen_invalidate_map_cache. Can you come up with a patch?
->
-> > >
->
-> > > I spoke too soon. In the regular case there should be no locked mappings
->
-> > > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
->
-> > > beginning of the functions). Without locked mappings, there should never
->
-> > > be more than one element in each list (see xen_map_cache_unlocked:
->
-> > > entry->lock == true is a necessary condition to append a new entry to
->
-> > > the list, otherwise it is just remapped).
->
-> > >
->
-> > > Can you confirm that what you are seeing are locked mappings
->
-> > > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
->
-> > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
->
-> >
->
-> > In fact, I think the DPRINTF above is incorrect too. In
->
-> > pci_add_option_rom(), rtl8139 rom is locked mapped in
->
-> > pci_add_option_rom->memory_region_get_ram_ptr (after
->
-> > memory_region_init_ram). So actually I think we should remove the
->
-> > DPRINTF warning as it is normal.
->
->
->
-> Let me explain why the DPRINTF warning is there: emulated dma operations
->
-> can involve locked mappings. Once a dma operation completes, the related
->
-> mapping is unlocked and can be safely destroyed. But if we destroy a
->
-> locked mapping in xen_invalidate_map_cache, while a dma is still
->
-> ongoing, QEMU will crash. We cannot handle that case.
->
->
->
-> However, the scenario you described is different. It has nothing to do
->
-> with DMA. It looks like pci_add_option_rom calls
->
-> memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
->
-> locked mapping and it is never unlocked or destroyed.
->
->
->
-> It looks like "ptr" is not used after pci_add_option_rom returns. Does
->
-> the append patch fix the problem you are seeing? For the proper fix, I
->
-> think we probably need some sort of memory_region_unmap wrapper or maybe
->
-> a call to address_space_unmap.
->
->
-Hmm, for some reason my message to the Xen-devel list got rejected but was
->
-sent
->
-to Qemu-devel instead, without any notice. Sorry if I'm missing something
->
-obvious as a list newbie.
->
->
-Stefano, hrg,
->
->
-There is an issue with inconsistency between the list of normal
->
-MapCacheEntry's
->
-and their 'reverse' counterparts - MapCacheRev's in locked_entries.
->
-When bad situation happens, there are multiple (locked) MapCacheEntry
->
-entries in the bucket's linked list along with a number of MapCacheRev's. And
->
-when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
->
-first list and calculates a wrong pointer from it which may then be caught
->
-with
->
-the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
->
-this issue as well I think.
->
->
-I'll try to provide a test code which can reproduce the issue from the
->
-guest side using an emulated IDE controller, though it's much simpler to
->
-achieve
->
-this result with an AHCI controller using multiple NCQ I/O commands. So far
->
-I've
->
-seen this issue only with Windows 7 (and above) guest on AHCI, but any block
->
-I/O
->
-DMA should be enough I think.
-That would be helpful. Please see if you can reproduce it after fixing
-the other issue (
-http://marc.info/?l=qemu-devel&m=149195042500707&w=2
-).
-
-On 2017/4/12 6:32, Stefano Stabellini wrote:
-On Tue, 11 Apr 2017, hrg wrote:
-On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
-<address@hidden> wrote:
-On Mon, 10 Apr 2017, Stefano Stabellini wrote:
-On Mon, 10 Apr 2017, hrg wrote:
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
-On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
-Hi,
-
-In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
-instead of first level entry (if map to rom other than guest memory
-comes first), while in xen_invalidate_map_cache(), when VM ballooned
-out memory, qemu did not invalidate cache entries in linked
-list(entry->next), so when VM balloon back in memory, gfns probably
-mapped to different mfns, thus if guest asks device to DMA to these
-GPA, qemu may DMA to stale MFNs.
-
-So I think in xen_invalidate_map_cache() linked lists should also be
-checked and invalidated.
-
-What’s your opinion? Is this a bug? Is my analyze correct?
-Yes, you are right. We need to go through the list for each element of
-the array in xen_invalidate_map_cache. Can you come up with a patch?
-I spoke too soon. In the regular case there should be no locked mappings
-when xen_invalidate_map_cache is called (see the DPRINTF warning at the
-beginning of the functions). Without locked mappings, there should never
-be more than one element in each list (see xen_map_cache_unlocked:
-entry->lock == true is a necessary condition to append a new entry to
-the list, otherwise it is just remapped).
-
-Can you confirm that what you are seeing are locked mappings
-when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
-by turning it into a printf or by defininig MAPCACHE_DEBUG.
-In fact, I think the DPRINTF above is incorrect too. In
-pci_add_option_rom(), rtl8139 rom is locked mapped in
-pci_add_option_rom->memory_region_get_ram_ptr (after
-memory_region_init_ram). So actually I think we should remove the
-DPRINTF warning as it is normal.
-Let me explain why the DPRINTF warning is there: emulated dma operations
-can involve locked mappings. Once a dma operation completes, the related
-mapping is unlocked and can be safely destroyed. But if we destroy a
-locked mapping in xen_invalidate_map_cache, while a dma is still
-ongoing, QEMU will crash. We cannot handle that case.
-
-However, the scenario you described is different. It has nothing to do
-with DMA. It looks like pci_add_option_rom calls
-memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
-locked mapping and it is never unlocked or destroyed.
-
-It looks like "ptr" is not used after pci_add_option_rom returns. Does
-the append patch fix the problem you are seeing? For the proper fix, I
-think we probably need some sort of memory_region_unmap wrapper or maybe
-a call to address_space_unmap.
-Yes, I think so, maybe this is the proper way to fix this.
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
-index e6b08e1..04f98b7 100644
---- a/hw/pci/pci.c
-+++ b/hw/pci/pci.c
-@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool 
-is_default_rom,
-      }
-pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
-+    xen_invalidate_map_cache_entry(ptr);
-  }
-static void pci_del_option_rom(PCIDevice *pdev)
-
-On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
->
-On 2017/4/12 6:32, Stefano Stabellini wrote:
->
-> On Tue, 11 Apr 2017, hrg wrote:
->
-> > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
->
-> > <address@hidden> wrote:
->
-> > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-> > > > On Mon, 10 Apr 2017, hrg wrote:
->
-> > > > > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
->
-> > > > > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
->
-> > > > > > > Hi,
->
-> > > > > > >
->
-> > > > > > > In xen_map_cache_unlocked(), map to guest memory maybe in
->
-> > > > > > > entry->next
->
-> > > > > > > instead of first level entry (if map to rom other than guest
->
-> > > > > > > memory
->
-> > > > > > > comes first), while in xen_invalidate_map_cache(), when VM
->
-> > > > > > > ballooned
->
-> > > > > > > out memory, qemu did not invalidate cache entries in linked
->
-> > > > > > > list(entry->next), so when VM balloon back in memory, gfns
->
-> > > > > > > probably
->
-> > > > > > > mapped to different mfns, thus if guest asks device to DMA to
->
-> > > > > > > these
->
-> > > > > > > GPA, qemu may DMA to stale MFNs.
->
-> > > > > > >
->
-> > > > > > > So I think in xen_invalidate_map_cache() linked lists should
->
-> > > > > > > also be
->
-> > > > > > > checked and invalidated.
->
-> > > > > > >
->
-> > > > > > > What’s your opinion? Is this a bug? Is my analyze correct?
->
-> > > > Yes, you are right. We need to go through the list for each element of
->
-> > > > the array in xen_invalidate_map_cache. Can you come up with a patch?
->
-> > > I spoke too soon. In the regular case there should be no locked mappings
->
-> > > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
->
-> > > beginning of the functions). Without locked mappings, there should never
->
-> > > be more than one element in each list (see xen_map_cache_unlocked:
->
-> > > entry->lock == true is a necessary condition to append a new entry to
->
-> > > the list, otherwise it is just remapped).
->
-> > >
->
-> > > Can you confirm that what you are seeing are locked mappings
->
-> > > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
->
-> > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
->
-> > In fact, I think the DPRINTF above is incorrect too. In
->
-> > pci_add_option_rom(), rtl8139 rom is locked mapped in
->
-> > pci_add_option_rom->memory_region_get_ram_ptr (after
->
-> > memory_region_init_ram). So actually I think we should remove the
->
-> > DPRINTF warning as it is normal.
->
-> Let me explain why the DPRINTF warning is there: emulated dma operations
->
-> can involve locked mappings. Once a dma operation completes, the related
->
-> mapping is unlocked and can be safely destroyed. But if we destroy a
->
-> locked mapping in xen_invalidate_map_cache, while a dma is still
->
-> ongoing, QEMU will crash. We cannot handle that case.
->
->
->
-> However, the scenario you described is different. It has nothing to do
->
-> with DMA. It looks like pci_add_option_rom calls
->
-> memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
->
-> locked mapping and it is never unlocked or destroyed.
->
->
->
-> It looks like "ptr" is not used after pci_add_option_rom returns. Does
->
-> the append patch fix the problem you are seeing? For the proper fix, I
->
-> think we probably need some sort of memory_region_unmap wrapper or maybe
->
-> a call to address_space_unmap.
->
->
-Yes, I think so, maybe this is the proper way to fix this.
-Would you be up for sending a proper patch and testing it? We cannot call
-xen_invalidate_map_cache_entry directly from pci.c though, it would need
-to be one of the other functions like address_space_unmap for example.
-
-
->
-> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
->
-> index e6b08e1..04f98b7 100644
->
-> --- a/hw/pci/pci.c
->
-> +++ b/hw/pci/pci.c
->
-> @@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool
->
-> is_default_rom,
->
->       }
->
->         pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
->
-> +    xen_invalidate_map_cache_entry(ptr);
->
->   }
->
->     static void pci_del_option_rom(PCIDevice *pdev)
-
-On 2017/4/13 7:51, Stefano Stabellini wrote:
-On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
-On 2017/4/12 6:32, Stefano Stabellini wrote:
-On Tue, 11 Apr 2017, hrg wrote:
-On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
-<address@hidden> wrote:
-On Mon, 10 Apr 2017, Stefano Stabellini wrote:
-On Mon, 10 Apr 2017, hrg wrote:
-On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
-On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
-Hi,
-
-In xen_map_cache_unlocked(), map to guest memory maybe in
-entry->next
-instead of first level entry (if map to rom other than guest
-memory
-comes first), while in xen_invalidate_map_cache(), when VM
-ballooned
-out memory, qemu did not invalidate cache entries in linked
-list(entry->next), so when VM balloon back in memory, gfns
-probably
-mapped to different mfns, thus if guest asks device to DMA to
-these
-GPA, qemu may DMA to stale MFNs.
-
-So I think in xen_invalidate_map_cache() linked lists should
-also be
-checked and invalidated.
-
-What’s your opinion? Is this a bug? Is my analyze correct?
-Yes, you are right. We need to go through the list for each element of
-the array in xen_invalidate_map_cache. Can you come up with a patch?
-I spoke too soon. In the regular case there should be no locked mappings
-when xen_invalidate_map_cache is called (see the DPRINTF warning at the
-beginning of the functions). Without locked mappings, there should never
-be more than one element in each list (see xen_map_cache_unlocked:
-entry->lock == true is a necessary condition to append a new entry to
-the list, otherwise it is just remapped).
-
-Can you confirm that what you are seeing are locked mappings
-when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
-by turning it into a printf or by defininig MAPCACHE_DEBUG.
-In fact, I think the DPRINTF above is incorrect too. In
-pci_add_option_rom(), rtl8139 rom is locked mapped in
-pci_add_option_rom->memory_region_get_ram_ptr (after
-memory_region_init_ram). So actually I think we should remove the
-DPRINTF warning as it is normal.
-Let me explain why the DPRINTF warning is there: emulated dma operations
-can involve locked mappings. Once a dma operation completes, the related
-mapping is unlocked and can be safely destroyed. But if we destroy a
-locked mapping in xen_invalidate_map_cache, while a dma is still
-ongoing, QEMU will crash. We cannot handle that case.
-
-However, the scenario you described is different. It has nothing to do
-with DMA. It looks like pci_add_option_rom calls
-memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
-locked mapping and it is never unlocked or destroyed.
-
-It looks like "ptr" is not used after pci_add_option_rom returns. Does
-the append patch fix the problem you are seeing? For the proper fix, I
-think we probably need some sort of memory_region_unmap wrapper or maybe
-a call to address_space_unmap.
-Yes, I think so, maybe this is the proper way to fix this.
-Would you be up for sending a proper patch and testing it? We cannot call
-xen_invalidate_map_cache_entry directly from pci.c though, it would need
-to be one of the other functions like address_space_unmap for example.
-Yes, I will look into this.
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
-index e6b08e1..04f98b7 100644
---- a/hw/pci/pci.c
-+++ b/hw/pci/pci.c
-@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool
-is_default_rom,
-       }
-         pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
-+    xen_invalidate_map_cache_entry(ptr);
-   }
-     static void pci_del_option_rom(PCIDevice *pdev)
-
-On Thu, 13 Apr 2017, Herongguang (Stephen) wrote:
->
-On 2017/4/13 7:51, Stefano Stabellini wrote:
->
-> On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
->
-> > On 2017/4/12 6:32, Stefano Stabellini wrote:
->
-> > > On Tue, 11 Apr 2017, hrg wrote:
->
-> > > > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
->
-> > > > <address@hidden> wrote:
->
-> > > > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
->
-> > > > > > On Mon, 10 Apr 2017, hrg wrote:
->
-> > > > > > > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden>
->
-> > > > > > > wrote:
->
-> > > > > > > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden>
->
-> > > > > > > > wrote:
->
-> > > > > > > > > Hi,
->
-> > > > > > > > >
->
-> > > > > > > > > In xen_map_cache_unlocked(), map to guest memory maybe in
->
-> > > > > > > > > entry->next
->
-> > > > > > > > > instead of first level entry (if map to rom other than guest
->
-> > > > > > > > > memory
->
-> > > > > > > > > comes first), while in xen_invalidate_map_cache(), when VM
->
-> > > > > > > > > ballooned
->
-> > > > > > > > > out memory, qemu did not invalidate cache entries in linked
->
-> > > > > > > > > list(entry->next), so when VM balloon back in memory, gfns
->
-> > > > > > > > > probably
->
-> > > > > > > > > mapped to different mfns, thus if guest asks device to DMA
->
-> > > > > > > > > to
->
-> > > > > > > > > these
->
-> > > > > > > > > GPA, qemu may DMA to stale MFNs.
->
-> > > > > > > > >
->
-> > > > > > > > > So I think in xen_invalidate_map_cache() linked lists should
->
-> > > > > > > > > also be
->
-> > > > > > > > > checked and invalidated.
->
-> > > > > > > > >
->
-> > > > > > > > > What’s your opinion? Is this a bug? Is my analyze correct?
->
-> > > > > > Yes, you are right. We need to go through the list for each
->
-> > > > > > element of
->
-> > > > > > the array in xen_invalidate_map_cache. Can you come up with a
->
-> > > > > > patch?
->
-> > > > > I spoke too soon. In the regular case there should be no locked
->
-> > > > > mappings
->
-> > > > > when xen_invalidate_map_cache is called (see the DPRINTF warning at
->
-> > > > > the
->
-> > > > > beginning of the functions). Without locked mappings, there should
->
-> > > > > never
->
-> > > > > be more than one element in each list (see xen_map_cache_unlocked:
->
-> > > > > entry->lock == true is a necessary condition to append a new entry
->
-> > > > > to
->
-> > > > > the list, otherwise it is just remapped).
->
-> > > > >
->
-> > > > > Can you confirm that what you are seeing are locked mappings
->
-> > > > > when xen_invalidate_map_cache is called? To find out, enable the
->
-> > > > > DPRINTK
->
-> > > > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
->
-> > > > In fact, I think the DPRINTF above is incorrect too. In
->
-> > > > pci_add_option_rom(), rtl8139 rom is locked mapped in
->
-> > > > pci_add_option_rom->memory_region_get_ram_ptr (after
->
-> > > > memory_region_init_ram). So actually I think we should remove the
->
-> > > > DPRINTF warning as it is normal.
->
-> > > Let me explain why the DPRINTF warning is there: emulated dma operations
->
-> > > can involve locked mappings. Once a dma operation completes, the related
->
-> > > mapping is unlocked and can be safely destroyed. But if we destroy a
->
-> > > locked mapping in xen_invalidate_map_cache, while a dma is still
->
-> > > ongoing, QEMU will crash. We cannot handle that case.
->
-> > >
->
-> > > However, the scenario you described is different. It has nothing to do
->
-> > > with DMA. It looks like pci_add_option_rom calls
->
-> > > memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
->
-> > > locked mapping and it is never unlocked or destroyed.
->
-> > >
->
-> > > It looks like "ptr" is not used after pci_add_option_rom returns. Does
->
-> > > the append patch fix the problem you are seeing? For the proper fix, I
->
-> > > think we probably need some sort of memory_region_unmap wrapper or maybe
->
-> > > a call to address_space_unmap.
->
-> >
->
-> > Yes, I think so, maybe this is the proper way to fix this.
->
->
->
-> Would you be up for sending a proper patch and testing it? We cannot call
->
-> xen_invalidate_map_cache_entry directly from pci.c though, it would need
->
-> to be one of the other functions like address_space_unmap for example.
->
->
->
->
->
-Yes, I will look into this.
-Any updates?
-
-
->
-> > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c
->
-> > > index e6b08e1..04f98b7 100644
->
-> > > --- a/hw/pci/pci.c
->
-> > > +++ b/hw/pci/pci.c
->
-> > > @@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev,
->
-> > > bool
->
-> > > is_default_rom,
->
-> > >        }
->
-> > >          pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
->
-> > > +    xen_invalidate_map_cache_entry(ptr);
->
-> > >    }
->
-> > >      static void pci_del_option_rom(PCIDevice *pdev)
->
-
diff --git a/results/classifier/005/other/55367348 b/results/classifier/005/other/55367348
deleted file mode 100644
index 39f042ab..00000000
--- a/results/classifier/005/other/55367348
+++ /dev/null
@@ -1,540 +0,0 @@
-other: 0.626
-mistranslation: 0.615
-device: 0.586
-instruction: 0.572
-semantic: 0.555
-graphic: 0.532
-assembly: 0.531
-network: 0.518
-socket: 0.501
-boot: 0.486
-KVM: 0.470
-vnc: 0.465
-
-[Qemu-devel] [Bug] Docs build fails at interop.rst
-
-https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
-running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
-(Rawhide)
-
-uname - a
-Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
-UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
-
-Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
-allows for the build to occur
-
-Regards
-Aarushi Mehta
-
-On 5/20/19 7:30 AM, Aarushi Mehta wrote:
->
-https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
->
-running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
->
-(Rawhide)
->
->
-uname - a
->
-Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
->
-UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
->
->
-Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
->
-allows for the build to occur
->
->
-Regards
->
-Aarushi Mehta
->
->
-Ah, dang. The blocks aren't strictly conforming json, but the version I
-tested this under didn't seem to care. Your version is much newer. (I
-was using 1.7 as provided by Fedora 29.)
-
-For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
-which should at least turn off the "warnings as errors" option, but I
-don't think that reverting -n will turn off this warning.
-
-I'll try to get ahold of this newer version and see if I can't fix it
-more appropriately.
-
---js
-
-On 5/20/19 12:37 PM, John Snow wrote:
->
->
->
-On 5/20/19 7:30 AM, Aarushi Mehta wrote:
->
->
-https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
->
-> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
->
-> (Rawhide)
->
->
->
-> uname - a
->
-> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
->
-> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
->
->
->
-> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
->
-> allows for the build to occur
->
->
->
-> Regards
->
-> Aarushi Mehta
->
->
->
->
->
->
-Ah, dang. The blocks aren't strictly conforming json, but the version I
->
-tested this under didn't seem to care. Your version is much newer. (I
->
-was using 1.7 as provided by Fedora 29.)
->
->
-For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
->
-which should at least turn off the "warnings as errors" option, but I
->
-don't think that reverting -n will turn off this warning.
->
->
-I'll try to get ahold of this newer version and see if I can't fix it
->
-more appropriately.
->
->
---js
->
-...Sigh, okay.
-
-So, I am still not actually sure what changed from pygments 2.2 and
-sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
-by default always tries to do add a filter to the pygments lexer that
-raises an error on highlighting failure, instead of the default behavior
-which is to just highlight those errors in the output. There is no
-option to Sphinx that I am aware of to retain this lexing behavior.
-(Effectively, it's strict or nothing.)
-
-This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
-build works with our malformed json.
-
-There are a few options:
-
-1. Update conf.py to ignore these warnings (and all future lexing
-errors), and settle for the fact that there will be no QMP highlighting
-wherever we use the directionality indicators ('->', '<-').
-
-2. Update bitmaps.rst to remove the directionality indicators.
-
-3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
-
-4. Update bitmaps.rst to remove the "json" specification from the code
-block. This will cause sphinx to "guess" the formatting, and the
-pygments guesser will decide it's Python3.
-
-This will parse well enough, but will mis-highlight 'true' and 'false'
-which are not python keywords. This approach may break in the future if
-the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
-still invalid), and leaves us at the mercy of both the guesser and the
-lexer.
-
-I'm not actually sure what I dislike the least; I think I dislike #1 the
-most. #4 gets us most of what we want but is perhaps porcelain.
-
-I suspect if we attempt to move more of our documentation to ReST and
-Sphinx that we will need to answer for ourselves how we intend to
-document QMP code flow examples.
-
---js
-
-On Mon, May 20, 2019 at 05:25:28PM -0400, John Snow wrote:
->
->
->
-On 5/20/19 12:37 PM, John Snow wrote:
->
->
->
->
->
-> On 5/20/19 7:30 AM, Aarushi Mehta wrote:
->
->>
-https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
->
->> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
->
->> (Rawhide)
->
->>
->
->> uname - a
->
->> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
->
->> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
->
->>
->
->> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
->
->> allows for the build to occur
->
->>
->
->> Regards
->
->> Aarushi Mehta
->
->>
->
->>
->
->
->
-> Ah, dang. The blocks aren't strictly conforming json, but the version I
->
-> tested this under didn't seem to care. Your version is much newer. (I
->
-> was using 1.7 as provided by Fedora 29.)
->
->
->
-> For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
->
-> which should at least turn off the "warnings as errors" option, but I
->
-> don't think that reverting -n will turn off this warning.
->
->
->
-> I'll try to get ahold of this newer version and see if I can't fix it
->
-> more appropriately.
->
->
->
-> --js
->
->
->
->
-...Sigh, okay.
->
->
-So, I am still not actually sure what changed from pygments 2.2 and
->
-sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
->
-by default always tries to do add a filter to the pygments lexer that
->
-raises an error on highlighting failure, instead of the default behavior
->
-which is to just highlight those errors in the output. There is no
->
-option to Sphinx that I am aware of to retain this lexing behavior.
->
-(Effectively, it's strict or nothing.)
->
->
-This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
->
-build works with our malformed json.
->
->
-There are a few options:
->
->
-1. Update conf.py to ignore these warnings (and all future lexing
->
-errors), and settle for the fact that there will be no QMP highlighting
->
-wherever we use the directionality indicators ('->', '<-').
->
->
-2. Update bitmaps.rst to remove the directionality indicators.
->
->
-3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
->
->
-4. Update bitmaps.rst to remove the "json" specification from the code
->
-block. This will cause sphinx to "guess" the formatting, and the
->
-pygments guesser will decide it's Python3.
->
->
-This will parse well enough, but will mis-highlight 'true' and 'false'
->
-which are not python keywords. This approach may break in the future if
->
-the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
->
-still invalid), and leaves us at the mercy of both the guesser and the
->
-lexer.
->
->
-I'm not actually sure what I dislike the least; I think I dislike #1 the
->
-most. #4 gets us most of what we want but is perhaps porcelain.
->
->
-I suspect if we attempt to move more of our documentation to ReST and
->
-Sphinx that we will need to answer for ourselves how we intend to
->
-document QMP code flow examples.
-Writing a custom lexer that handles "<-" and "->" was simple (see below).
-
-Now, is it possible to convince Sphinx to register and use a custom lexer?
-
-$ cat > /tmp/lexer.py <<EOF
-from pygments.lexer import RegexLexer, DelegatingLexer
-from pygments.lexers.data import JsonLexer
-import re
-from pygments.token import *
-
-class QMPExampleMarkersLexer(RegexLexer):
-    tokens = {
-        'root': [
-            (r' *-> *', Generic.Prompt),
-            (r' *<- *', Generic.Output),
-        ]
-    }
-
-class QMPExampleLexer(DelegatingLexer):
-    def __init__(self, **options):
-        super(QMPExampleLexer, self).__init__(JsonLexer, 
-QMPExampleMarkersLexer, Error, **options)
-EOF
-$ pygmentize -l /tmp/lexer.py:QMPExampleLexer -x -f html <<EOF
-    -> {
-         "execute": "drive-backup",
-         "arguments": {
-           "device": "drive0",
-           "bitmap": "bitmap0",
-           "target": "drive0.inc0.qcow2",
-           "format": "qcow2",
-           "sync": "incremental",
-           "mode": "existing"
-         }
-       }
-
-    <- { "return": {} }
-EOF
-<div class="highlight"><pre><span></span><span class="gp">    -&gt; 
-</span><span class="p">{</span>
-         <span class="nt">&quot;execute&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;drive-backup&quot;</span><span class="p">,</span>
-         <span class="nt">&quot;arguments&quot;</span><span class="p">:</span> 
-<span class="p">{</span>
-           <span class="nt">&quot;device&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;drive0&quot;</span><span class="p">,</span>
-           <span class="nt">&quot;bitmap&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;bitmap0&quot;</span><span class="p">,</span>
-           <span class="nt">&quot;target&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;drive0.inc0.qcow2&quot;</span><span class="p">,</span>
-           <span class="nt">&quot;format&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;qcow2&quot;</span><span class="p">,</span>
-           <span class="nt">&quot;sync&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;incremental&quot;</span><span class="p">,</span>
-           <span class="nt">&quot;mode&quot;</span><span class="p">:</span> 
-<span class="s2">&quot;existing&quot;</span>
-         <span class="p">}</span>
-       <span class="p">}</span>
-
-<span class="go">    &lt;- </span><span class="p">{</span> <span 
-class="nt">&quot;return&quot;</span><span class="p">:</span> <span 
-class="p">{}</span> <span class="p">}</span>
-</pre></div>
-$ 
-
-
--- 
-Eduardo
-
-On 5/20/19 7:04 PM, Eduardo Habkost wrote:
->
-On Mon, May 20, 2019 at 05:25:28PM -0400, John Snow wrote:
->
->
->
->
->
-> On 5/20/19 12:37 PM, John Snow wrote:
->
->>
->
->>
->
->> On 5/20/19 7:30 AM, Aarushi Mehta wrote:
->
->>>
-https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
->
->>> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
->
->>> (Rawhide)
->
->>>
->
->>> uname - a
->
->>> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
->
->>> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
->
->>>
->
->>> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
->
->>> allows for the build to occur
->
->>>
->
->>> Regards
->
->>> Aarushi Mehta
->
->>>
->
->>>
->
->>
->
->> Ah, dang. The blocks aren't strictly conforming json, but the version I
->
->> tested this under didn't seem to care. Your version is much newer. (I
->
->> was using 1.7 as provided by Fedora 29.)
->
->>
->
->> For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
->
->> which should at least turn off the "warnings as errors" option, but I
->
->> don't think that reverting -n will turn off this warning.
->
->>
->
->> I'll try to get ahold of this newer version and see if I can't fix it
->
->> more appropriately.
->
->>
->
->> --js
->
->>
->
->
->
-> ...Sigh, okay.
->
->
->
-> So, I am still not actually sure what changed from pygments 2.2 and
->
-> sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
->
-> by default always tries to do add a filter to the pygments lexer that
->
-> raises an error on highlighting failure, instead of the default behavior
->
-> which is to just highlight those errors in the output. There is no
->
-> option to Sphinx that I am aware of to retain this lexing behavior.
->
-> (Effectively, it's strict or nothing.)
->
->
->
-> This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
->
-> build works with our malformed json.
->
->
->
-> There are a few options:
->
->
->
-> 1. Update conf.py to ignore these warnings (and all future lexing
->
-> errors), and settle for the fact that there will be no QMP highlighting
->
-> wherever we use the directionality indicators ('->', '<-').
->
->
->
-> 2. Update bitmaps.rst to remove the directionality indicators.
->
->
->
-> 3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
->
->
->
-> 4. Update bitmaps.rst to remove the "json" specification from the code
->
-> block. This will cause sphinx to "guess" the formatting, and the
->
-> pygments guesser will decide it's Python3.
->
->
->
-> This will parse well enough, but will mis-highlight 'true' and 'false'
->
-> which are not python keywords. This approach may break in the future if
->
-> the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
->
-> still invalid), and leaves us at the mercy of both the guesser and the
->
-> lexer.
->
->
->
-> I'm not actually sure what I dislike the least; I think I dislike #1 the
->
-> most. #4 gets us most of what we want but is perhaps porcelain.
->
->
->
-> I suspect if we attempt to move more of our documentation to ReST and
->
-> Sphinx that we will need to answer for ourselves how we intend to
->
-> document QMP code flow examples.
->
->
-Writing a custom lexer that handles "<-" and "->" was simple (see below).
->
->
-Now, is it possible to convince Sphinx to register and use a custom lexer?
->
-Spoilers, yes, and I've sent a patch to list. Thanks for your help!
-
diff --git a/results/classifier/005/other/55753058 b/results/classifier/005/other/55753058
deleted file mode 100644
index ff699cdc..00000000
--- a/results/classifier/005/other/55753058
+++ /dev/null
@@ -1,301 +0,0 @@
-other: 0.734
-KVM: 0.713
-vnc: 0.682
-mistranslation: 0.649
-graphic: 0.630
-device: 0.623
-instruction: 0.581
-semantic: 0.577
-assembly: 0.529
-network: 0.525
-boot: 0.478
-socket: 0.462
-
-[RESEND][BUG FIX HELP] QEMU main thread endlessly hangs in __ppoll()
-
-Hi Genius,
-I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may still
-exist in the mainline.
-Thanks in advance to heroes who can take a look and share understanding.
-
-The qemu main thread endlessly hangs in the handle of the qmp statement:
-{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
-'drive_del replication0' } }
-and we have the call trace looks like:
-#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
-timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
-sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
-#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
-__nfds=<optimized out>, __fds=<optimized out>)
-at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
-#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
-timeout=<optimized out>) at util/qemu-timer.c:348
-#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
-blocking=blocking@entry=true) at util/aio-posix.c:669
-#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
-ignore_bds_parents=false, parent=0x0, recursive=false,
-bs=0x55561138b0a0) at block/io.c:430
-#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
-parent=0x0, ignore_bds_parents=<optimized out>,
-poll=<optimized out>) at block/io.c:396
-#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
-child=0x7f36dc0ce380, errp=<optimized out>)
-at block/quorum.c:1063
-#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
-"colo-disk0", has_child=<optimized out>,
-child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
-errp=0x7ffc56c66f98) at blockdev.c:4494
-#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
-out>, ret=<optimized out>, errp=0x7ffc56c67018)
-at qapi/qapi-commands-block-core.c:1538
-#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
-allow_oob=<optimized out>, request=<optimized out>,
-cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
-#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
-out>, allow_oob=<optimized out>)
-at qapi/qmp-dispatch.c:175
-#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
-req=<optimized out>) at monitor/qmp.c:145
-#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized out>)
-at monitor/qmp.c:234
-#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
-util/async.c:117
-#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
-#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
-util/aio-posix.c:459
-#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
-callback=<optimized out>, user_data=<optimized out>)
-at util/async.c:260
-#17 0x00007f3c22302fbd in g_main_context_dispatch () from
-/lib/x86_64-linux-gnu/libglib-2.0.so.0
-#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
-#19 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
-#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
-#21 0x000055560ff600fe in main_loop () at vl.c:1814
-#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized out>,
-envp=<optimized out>) at vl.c:4503
-We found that we're doing endless check in the line of
-block/io.c:bdrv_do_drained_begin():
-BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
-and it turns out that the bdrv_drain_poll() always get true from:
-- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
-- AND atomic_read(&bs->in_flight)
-
-I personally think this is a deadlock issue in the a QEMU block layer
-(as we know, we have some #FIXME comments in related codes, such as block
-permisson update).
-Any comments are welcome and appreciated.
-
----
-thx,likexu
-
-On 2/28/21 9:39 PM, Like Xu wrote:
-Hi Genius,
-I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
-still exist in the mainline.
-Thanks in advance to heroes who can take a look and share understanding.
-Do you have a test case that reproduces on 5.2? It'd be nice to know if
-it was still a problem in the latest source tree or not.
---js
-The qemu main thread endlessly hangs in the handle of the qmp statement:
-{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
-'drive_del replication0' } }
-and we have the call trace looks like:
-#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
-timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
-sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
-#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
-__nfds=<optimized out>, __fds=<optimized out>)
-at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
-#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
-timeout=<optimized out>) at util/qemu-timer.c:348
-#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
-blocking=blocking@entry=true) at util/aio-posix.c:669
-#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
-ignore_bds_parents=false, parent=0x0, recursive=false,
-bs=0x55561138b0a0) at block/io.c:430
-#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
-parent=0x0, ignore_bds_parents=<optimized out>,
-poll=<optimized out>) at block/io.c:396
-#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
-child=0x7f36dc0ce380, errp=<optimized out>)
-at block/quorum.c:1063
-#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
-"colo-disk0", has_child=<optimized out>,
-child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
-errp=0x7ffc56c66f98) at blockdev.c:4494
-#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
-out>, ret=<optimized out>, errp=0x7ffc56c67018)
-at qapi/qapi-commands-block-core.c:1538
-#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
-allow_oob=<optimized out>, request=<optimized out>,
-cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
-#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
-out>, allow_oob=<optimized out>)
-at qapi/qmp-dispatch.c:175
-#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
-req=<optimized out>) at monitor/qmp.c:145
-#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized
-out>) at monitor/qmp.c:234
-#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
-util/async.c:117
-#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
-#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
-util/aio-posix.c:459
-#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
-callback=<optimized out>, user_data=<optimized out>)
-at util/async.c:260
-#17 0x00007f3c22302fbd in g_main_context_dispatch () from
-/lib/x86_64-linux-gnu/libglib-2.0.so.0
-#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
-#19 os_host_main_loop_wait (timeout=<optimized out>) at
-util/main-loop.c:242
-#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
-#21 0x000055560ff600fe in main_loop () at vl.c:1814
-#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized
-out>, envp=<optimized out>) at vl.c:4503
-We found that we're doing endless check in the line of
-block/io.c:bdrv_do_drained_begin():
-    BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
-and it turns out that the bdrv_drain_poll() always get true from:
-- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
-- AND atomic_read(&bs->in_flight)
-
-I personally think this is a deadlock issue in the a QEMU block layer
-(as we know, we have some #FIXME comments in related codes, such as
-block permisson update).
-Any comments are welcome and appreciated.
-
----
-thx,likexu
-
-Hi John,
-
-Thanks for your comment.
-
-On 2021/3/5 7:53, John Snow wrote:
-On 2/28/21 9:39 PM, Like Xu wrote:
-Hi Genius,
-I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
-still exist in the mainline.
-Thanks in advance to heroes who can take a look and share understanding.
-Do you have a test case that reproduces on 5.2? It'd be nice to know if it
-was still a problem in the latest source tree or not.
-We narrowed down the source of the bug, which basically came from
-the following qmp usage:
-{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
-'drive_del replication0' } }
-One of the test cases is the COLO usage (docs/colo-proxy.txt).
-
-This issue is sporadic,the probability may be 1/15 for a io-heavy guest.
-
-I believe it's reproducible on 5.2 and the latest tree.
---js
-The qemu main thread endlessly hangs in the handle of the qmp statement:
-{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
-'drive_del replication0' } }
-and we have the call trace looks like:
-#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
-timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
-sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
-#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
-__nfds=<optimized out>, __fds=<optimized out>)
-at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
-#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
-timeout=<optimized out>) at util/qemu-timer.c:348
-#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
-blocking=blocking@entry=true) at util/aio-posix.c:669
-#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
-ignore_bds_parents=false, parent=0x0, recursive=false,
-bs=0x55561138b0a0) at block/io.c:430
-#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
-parent=0x0, ignore_bds_parents=<optimized out>,
-poll=<optimized out>) at block/io.c:396
-#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
-child=0x7f36dc0ce380, errp=<optimized out>)
-at block/quorum.c:1063
-#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
-"colo-disk0", has_child=<optimized out>,
-child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
-errp=0x7ffc56c66f98) at blockdev.c:4494
-#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
-out>, ret=<optimized out>, errp=0x7ffc56c67018)
-at qapi/qapi-commands-block-core.c:1538
-#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
-allow_oob=<optimized out>, request=<optimized out>,
-cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
-#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
-out>, allow_oob=<optimized out>)
-at qapi/qmp-dispatch.c:175
-#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
-req=<optimized out>) at monitor/qmp.c:145
-#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized
-out>) at monitor/qmp.c:234
-#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
-util/async.c:117
-#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
-#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
-util/aio-posix.c:459
-#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
-callback=<optimized out>, user_data=<optimized out>)
-at util/async.c:260
-#17 0x00007f3c22302fbd in g_main_context_dispatch () from
-/lib/x86_64-linux-gnu/libglib-2.0.so.0
-#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
-#19 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
-#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
-#21 0x000055560ff600fe in main_loop () at vl.c:1814
-#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized
-out>, envp=<optimized out>) at vl.c:4503
-We found that we're doing endless check in the line of
-block/io.c:bdrv_do_drained_begin():
-     BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
-and it turns out that the bdrv_drain_poll() always get true from:
-- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
-- AND atomic_read(&bs->in_flight)
-
-I personally think this is a deadlock issue in the a QEMU block layer
-(as we know, we have some #FIXME comments in related codes, such as block
-permisson update).
-Any comments are welcome and appreciated.
-
----
-thx,likexu
-
-On 3/4/21 10:08 PM, Like Xu wrote:
-Hi John,
-
-Thanks for your comment.
-
-On 2021/3/5 7:53, John Snow wrote:
-On 2/28/21 9:39 PM, Like Xu wrote:
-Hi Genius,
-I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
-still exist in the mainline.
-Thanks in advance to heroes who can take a look and share understanding.
-Do you have a test case that reproduces on 5.2? It'd be nice to know
-if it was still a problem in the latest source tree or not.
-We narrowed down the source of the bug, which basically came from
-the following qmp usage:
-{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
-'drive_del replication0' } }
-One of the test cases is the COLO usage (docs/colo-proxy.txt).
-
-This issue is sporadic,the probability may be 1/15 for a io-heavy guest.
-
-I believe it's reproducible on 5.2 and the latest tree.
-Can you please test and confirm that this is the case, and then file a
-bug report on the LP:
-https://launchpad.net/qemu
-and include:
-- The exact commit you used (current origin/master debug build would be
-the most ideal.)
-- Which QEMU binary you are using (qemu-system-x86_64?)
-- The shortest command line you are aware of that reproduces the problem
-- The host OS and kernel version
-- An updated call trace
-- Any relevant commands issued prior to the one that caused the hang; or
-detailed reproduction steps if possible.
-Thanks,
---js
-
diff --git a/results/classifier/005/other/56309929 b/results/classifier/005/other/56309929
deleted file mode 100644
index 2efc040b..00000000
--- a/results/classifier/005/other/56309929
+++ /dev/null
@@ -1,188 +0,0 @@
-other: 0.690
-device: 0.646
-KVM: 0.636
-assembly: 0.618
-vnc: 0.600
-network: 0.589
-instruction: 0.581
-boot: 0.578
-graphic: 0.570
-mistranslation: 0.554
-semantic: 0.521
-socket: 0.516
-
-[Qemu-devel] [BUG 2.6] Broken CONFIG_TPM?
-
-A compilation test with clang -Weverything reported this problem:
-
-config-host.h:112:20: warning: '$' in identifier
-[-Wdollar-in-identifier-extension]
-
-The line of code looks like this:
-
-#define CONFIG_TPM $(CONFIG_SOFTMMU)
-
-This is fine for Makefile code, but won't work as expected in C code.
-
-Am 28.04.2016 um 22:33 schrieb Stefan Weil:
->
-A compilation test with clang -Weverything reported this problem:
->
->
-config-host.h:112:20: warning: '$' in identifier
->
-[-Wdollar-in-identifier-extension]
->
->
-The line of code looks like this:
->
->
-#define CONFIG_TPM $(CONFIG_SOFTMMU)
->
->
-This is fine for Makefile code, but won't work as expected in C code.
->
-A complete 64 bit build with clang -Weverything creates a log file of
-1.7 GB.
-Here are the uniq warnings sorted by their frequency:
-
-      1 -Wflexible-array-extensions
-      1 -Wgnu-folding-constant
-      1 -Wunknown-pragmas
-      1 -Wunknown-warning-option
-      1 -Wunreachable-code-loop-increment
-      2 -Warray-bounds-pointer-arithmetic
-      2 -Wdollar-in-identifier-extension
-      3 -Woverlength-strings
-      3 -Wweak-vtables
-      4 -Wgnu-empty-struct
-      4 -Wstring-conversion
-      6 -Wclass-varargs
-      7 -Wc99-extensions
-      7 -Wc++-compat
-      8 -Wfloat-equal
-     11 -Wformat-nonliteral
-     16 -Wshift-negative-value
-     19 -Wglobal-constructors
-     28 -Wc++11-long-long
-     29 -Wembedded-directive
-     38 -Wvla
-     40 -Wcovered-switch-default
-     40 -Wmissing-variable-declarations
-     49 -Wold-style-cast
-     53 -Wgnu-conditional-omitted-operand
-     56 -Wformat-pedantic
-     61 -Wvariadic-macros
-     77 -Wc++11-extensions
-     83 -Wgnu-flexible-array-initializer
-     83 -Wzero-length-array
-     96 -Wgnu-designator
-    102 -Wmissing-noreturn
-    103 -Wconditional-uninitialized
-    107 -Wdisabled-macro-expansion
-    115 -Wunreachable-code-return
-    134 -Wunreachable-code
-    243 -Wunreachable-code-break
-    257 -Wfloat-conversion
-    280 -Wswitch-enum
-    291 -Wpointer-arith
-    298 -Wshadow
-    378 -Wassign-enum
-    395 -Wused-but-marked-unused
-    420 -Wreserved-id-macro
-    493 -Wdocumentation
-    510 -Wshift-sign-overflow
-    565 -Wgnu-case-range
-    566 -Wgnu-zero-variadic-macro-arguments
-    650 -Wbad-function-cast
-    705 -Wmissing-field-initializers
-    817 -Wgnu-statement-expression
-    968 -Wdocumentation-unknown-command
-   1021 -Wextra-semi
-   1112 -Wgnu-empty-initializer
-   1138 -Wcast-qual
-   1509 -Wcast-align
-   1766 -Wextended-offsetof
-   1937 -Wsign-compare
-   2130 -Wpacked
-   2404 -Wunused-macros
-   3081 -Wpadded
-   4182 -Wconversion
-   5430 -Wlanguage-extension-token
-   6655 -Wshorten-64-to-32
-   6995 -Wpedantic
-   7354 -Wunused-parameter
-  27659 -Wsign-conversion
-
-Stefan Weil <address@hidden> writes:
-
->
-A compilation test with clang -Weverything reported this problem:
->
->
-config-host.h:112:20: warning: '$' in identifier
->
-[-Wdollar-in-identifier-extension]
->
->
-The line of code looks like this:
->
->
-#define CONFIG_TPM $(CONFIG_SOFTMMU)
->
->
-This is fine for Makefile code, but won't work as expected in C code.
-Broken in commit 3b8acc1 "configure: fix TPM logic".  Cc'ing Paolo.
-
-Impact: #ifdef CONFIG_TPM never disables code.  There are no other uses
-of CONFIG_TPM in C code.
-
-I had a quick peek at configure and create_config, but refrained from
-attempting to fix this, since I don't understand when exactly CONFIG_TPM
-should be defined.
-
-On 29 April 2016 at 08:42, Markus Armbruster <address@hidden> wrote:
->
-Stefan Weil <address@hidden> writes:
->
->
-> A compilation test with clang -Weverything reported this problem:
->
->
->
-> config-host.h:112:20: warning: '$' in identifier
->
-> [-Wdollar-in-identifier-extension]
->
->
->
-> The line of code looks like this:
->
->
->
-> #define CONFIG_TPM $(CONFIG_SOFTMMU)
->
->
->
-> This is fine for Makefile code, but won't work as expected in C code.
->
->
-Broken in commit 3b8acc1 "configure: fix TPM logic".  Cc'ing Paolo.
->
->
-Impact: #ifdef CONFIG_TPM never disables code.  There are no other uses
->
-of CONFIG_TPM in C code.
->
->
-I had a quick peek at configure and create_config, but refrained from
->
-attempting to fix this, since I don't understand when exactly CONFIG_TPM
->
-should be defined.
-Looking at 'git blame' suggests this has been wrong like this for
-some years, so we don't need to scramble to fix it for 2.6.
-
-thanks
--- PMM
-
diff --git a/results/classifier/005/other/56937788 b/results/classifier/005/other/56937788
deleted file mode 100644
index e4043d1f..00000000
--- a/results/classifier/005/other/56937788
+++ /dev/null
@@ -1,352 +0,0 @@
-other: 0.791
-KVM: 0.755
-vnc: 0.743
-mistranslation: 0.735
-graphic: 0.720
-semantic: 0.705
-device: 0.697
-instruction: 0.653
-assembly: 0.638
-boot: 0.636
-network: 0.633
-socket: 0.613
-
-[Qemu-devel] [Bug] virtio-blk: qemu will crash if hotplug virtio-blk device failed
-
-I found that hotplug virtio-blk device will lead to qemu crash.
-
-Re-production steps:
-
-1.       Run VM named vm001
-
-2.       Create a virtio-blk.xml which contains wrong configurations:
-<disk device="lun" rawio="yes" type="block">
-  <driver cache="none" io="native" name="qemu" type="raw" />
-  <source dev="/dev/mapper/11-dm" />
-  <target bus="virtio" dev="vdx" />
-</disk>
-
-3.       Run command : virsh attach-device vm001 vm001
-
-Libvirt will return err msg:
-
-error: Failed to attach device from blk-scsi.xml
-
-error: internal error: unable to execute QEMU command 'device_add': Please set 
-scsi=off for virtio-blk devices in order to use virtio 1.0
-
-it means hotplug virtio-blk device failed.
-
-4.       Suspend or shutdown VM will leads to qemu crash
-
-
-
-from gdb:
-
-
-(gdb) bt
-#0  object_get_class (address@hidden) at qom/object.c:750
-#1  0x00007f9a72582e01 in virtio_vmstate_change (opaque=0x7f9a73d10960, 
-running=0, state=<optimized out>) at 
-/mnt/sdb/lzc/code/open/qemu/hw/virtio/virtio.c:2203
-#2  0x00007f9a7261ef52 in vm_state_notify (address@hidden, address@hidden) at 
-vl.c:1685
-#3  0x00007f9a7252603a in do_vm_stop (state=RUN_STATE_PAUSED) at 
-/mnt/sdb/lzc/code/open/qemu/cpus.c:941
-#4  vm_stop (address@hidden) at /mnt/sdb/lzc/code/open/qemu/cpus.c:1807
-#5  0x00007f9a7262eb1b in qmp_stop (address@hidden) at qmp.c:102
-#6  0x00007f9a7262c70a in qmp_marshal_stop (args=<optimized out>, 
-ret=<optimized out>, errp=0x7ffe63e255d8) at qmp-marshal.c:5854
-#7  0x00007f9a72897e79 in do_qmp_dispatch (errp=0x7ffe63e255d0, 
-request=0x7f9a76510120, cmds=0x7f9a72ee7980 <qmp_commands>) at 
-qapi/qmp-dispatch.c:104
-#8  qmp_dispatch (cmds=0x7f9a72ee7980 <qmp_commands>, address@hidden) at 
-qapi/qmp-dispatch.c:131
-#9  0x00007f9a725288d5 in handle_qmp_command (parser=<optimized out>, 
-tokens=<optimized out>) at /mnt/sdb/lzc/code/open/qemu/monitor.c:3852
-#10 0x00007f9a7289d514 in json_message_process_token (lexer=0x7f9a73ce4498, 
-input=0x7f9a73cc6880, type=JSON_RCURLY, x=36, y=17) at 
-qobject/json-streamer.c:105
-#11 0x00007f9a728bb69b in json_lexer_feed_char (address@hidden, ch=125 '}', 
-address@hidden) at qobject/json-lexer.c:323
-#12 0x00007f9a728bb75e in json_lexer_feed (lexer=0x7f9a73ce4498, 
-buffer=<optimized out>, size=<optimized out>) at qobject/json-lexer.c:373
-#13 0x00007f9a7289d5d9 in json_message_parser_feed (parser=<optimized out>, 
-buffer=<optimized out>, size=<optimized out>) at qobject/json-streamer.c:124
-#14 0x00007f9a7252722e in monitor_qmp_read (opaque=<optimized out>, 
-buf=<optimized out>, size=<optimized out>) at 
-/mnt/sdb/lzc/code/open/qemu/monitor.c:3894
-#15 0x00007f9a7284ee1b in tcp_chr_read (chan=<optimized out>, cond=<optimized 
-out>, opaque=<optimized out>) at chardev/char-socket.c:441
-#16 0x00007f9a6e03e99a in g_main_context_dispatch () from 
-/usr/lib64/libglib-2.0.so.0
-#17 0x00007f9a728a342c in glib_pollfds_poll () at util/main-loop.c:214
-#18 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
-#19 main_loop_wait (address@hidden) at util/main-loop.c:515
-#20 0x00007f9a724e7547 in main_loop () at vl.c:1999
-#21 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at 
-vl.c:4877
-
-Problem happens in virtio_vmstate_change which is called by vm_state_notify,
-static void virtio_vmstate_change(void *opaque, int running, RunState state)
-{
-    VirtIODevice *vdev = opaque;
-    BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
-    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
-    bool backend_run = running && (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK);
-    vdev->vm_running = running;
-
-    if (backend_run) {
-        virtio_set_status(vdev, vdev->status);
-    }
-
-    if (k->vmstate_change) {
-        k->vmstate_change(qbus->parent, backend_run);
-    }
-
-    if (!backend_run) {
-        virtio_set_status(vdev, vdev->status);
-    }
-}
-
-Vdev's parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
-virtio_vmstate_change is added to the list vm_change_state_head at 
-virtio_blk_device_realize(virtio_init),
-but after hotplug virtio-blk failed, virtio_vmstate_change will not be removed 
-from vm_change_state_head.
-
-
-I apply a patch as follews:
-
-diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
-index 5884ce3..ea532dc 100644
---- a/hw/virtio/virtio.c
-+++ b/hw/virtio/virtio.c
-@@ -2491,6 +2491,7 @@ static void virtio_device_realize(DeviceState *dev, Error 
-**errp)
-     virtio_bus_device_plugged(vdev, &err);
-     if (err != NULL) {
-         error_propagate(errp, err);
-+        vdc->unrealize(dev, NULL);
-         return;
-     }
-
-On Tue, Oct 31, 2017 at 05:19:08AM +0000, linzhecheng wrote:
->
-I found that hotplug virtio-blk device will lead to qemu crash.
-The author posted a patch in a separate email thread.  Please see
-"[PATCH] fix: unrealize virtio device if we fail to hotplug it".
-
->
-Re-production steps:
->
->
-1.       Run VM named vm001
->
->
-2.       Create a virtio-blk.xml which contains wrong configurations:
->
-<disk device="lun" rawio="yes" type="block">
->
-<driver cache="none" io="native" name="qemu" type="raw" />
->
-<source dev="/dev/mapper/11-dm" />
->
-<target bus="virtio" dev="vdx" />
->
-</disk>
->
->
-3.       Run command : virsh attach-device vm001 vm001
->
->
-Libvirt will return err msg:
->
->
-error: Failed to attach device from blk-scsi.xml
->
->
-error: internal error: unable to execute QEMU command 'device_add': Please
->
-set scsi=off for virtio-blk devices in order to use virtio 1.0
->
->
-it means hotplug virtio-blk device failed.
->
->
-4.       Suspend or shutdown VM will leads to qemu crash
->
->
->
->
-from gdb:
->
->
->
-(gdb) bt
->
-#0  object_get_class (address@hidden) at qom/object.c:750
->
-#1  0x00007f9a72582e01 in virtio_vmstate_change (opaque=0x7f9a73d10960,
->
-running=0, state=<optimized out>) at
->
-/mnt/sdb/lzc/code/open/qemu/hw/virtio/virtio.c:2203
->
-#2  0x00007f9a7261ef52 in vm_state_notify (address@hidden, address@hidden) at
->
-vl.c:1685
->
-#3  0x00007f9a7252603a in do_vm_stop (state=RUN_STATE_PAUSED) at
->
-/mnt/sdb/lzc/code/open/qemu/cpus.c:941
->
-#4  vm_stop (address@hidden) at /mnt/sdb/lzc/code/open/qemu/cpus.c:1807
->
-#5  0x00007f9a7262eb1b in qmp_stop (address@hidden) at qmp.c:102
->
-#6  0x00007f9a7262c70a in qmp_marshal_stop (args=<optimized out>,
->
-ret=<optimized out>, errp=0x7ffe63e255d8) at qmp-marshal.c:5854
->
-#7  0x00007f9a72897e79 in do_qmp_dispatch (errp=0x7ffe63e255d0,
->
-request=0x7f9a76510120, cmds=0x7f9a72ee7980 <qmp_commands>) at
->
-qapi/qmp-dispatch.c:104
->
-#8  qmp_dispatch (cmds=0x7f9a72ee7980 <qmp_commands>, address@hidden) at
->
-qapi/qmp-dispatch.c:131
->
-#9  0x00007f9a725288d5 in handle_qmp_command (parser=<optimized out>,
->
-tokens=<optimized out>) at /mnt/sdb/lzc/code/open/qemu/monitor.c:3852
->
-#10 0x00007f9a7289d514 in json_message_process_token (lexer=0x7f9a73ce4498,
->
-input=0x7f9a73cc6880, type=JSON_RCURLY, x=36, y=17) at
->
-qobject/json-streamer.c:105
->
-#11 0x00007f9a728bb69b in json_lexer_feed_char (address@hidden, ch=125 '}',
->
-address@hidden) at qobject/json-lexer.c:323
->
-#12 0x00007f9a728bb75e in json_lexer_feed (lexer=0x7f9a73ce4498,
->
-buffer=<optimized out>, size=<optimized out>) at qobject/json-lexer.c:373
->
-#13 0x00007f9a7289d5d9 in json_message_parser_feed (parser=<optimized out>,
->
-buffer=<optimized out>, size=<optimized out>) at qobject/json-streamer.c:124
->
-#14 0x00007f9a7252722e in monitor_qmp_read (opaque=<optimized out>,
->
-buf=<optimized out>, size=<optimized out>) at
->
-/mnt/sdb/lzc/code/open/qemu/monitor.c:3894
->
-#15 0x00007f9a7284ee1b in tcp_chr_read (chan=<optimized out>, cond=<optimized
->
-out>, opaque=<optimized out>) at chardev/char-socket.c:441
->
-#16 0x00007f9a6e03e99a in g_main_context_dispatch () from
->
-/usr/lib64/libglib-2.0.so.0
->
-#17 0x00007f9a728a342c in glib_pollfds_poll () at util/main-loop.c:214
->
-#18 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
->
-#19 main_loop_wait (address@hidden) at util/main-loop.c:515
->
-#20 0x00007f9a724e7547 in main_loop () at vl.c:1999
->
-#21 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
->
-at vl.c:4877
->
->
-Problem happens in virtio_vmstate_change which is called by vm_state_notify,
->
-static void virtio_vmstate_change(void *opaque, int running, RunState state)
->
-{
->
-VirtIODevice *vdev = opaque;
->
-BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
->
-VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
->
-bool backend_run = running && (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK);
->
-vdev->vm_running = running;
->
->
-if (backend_run) {
->
-virtio_set_status(vdev, vdev->status);
->
-}
->
->
-if (k->vmstate_change) {
->
-k->vmstate_change(qbus->parent, backend_run);
->
-}
->
->
-if (!backend_run) {
->
-virtio_set_status(vdev, vdev->status);
->
-}
->
-}
->
->
-Vdev's parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
->
-virtio_vmstate_change is added to the list vm_change_state_head at
->
-virtio_blk_device_realize(virtio_init),
->
-but after hotplug virtio-blk failed, virtio_vmstate_change will not be
->
-removed from vm_change_state_head.
->
->
->
-I apply a patch as follews:
->
->
-diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
->
-index 5884ce3..ea532dc 100644
->
---- a/hw/virtio/virtio.c
->
-+++ b/hw/virtio/virtio.c
->
-@@ -2491,6 +2491,7 @@ static void virtio_device_realize(DeviceState *dev,
->
-Error **errp)
->
-virtio_bus_device_plugged(vdev, &err);
->
-if (err != NULL) {
->
-error_propagate(errp, err);
->
-+        vdc->unrealize(dev, NULL);
->
-return;
->
-}
-signature.asc
-Description:
-PGP signature
-
diff --git a/results/classifier/005/other/57756589 b/results/classifier/005/other/57756589
deleted file mode 100644
index 7a168faa..00000000
--- a/results/classifier/005/other/57756589
+++ /dev/null
@@ -1,1429 +0,0 @@
-other: 0.899
-mistranslation: 0.861
-instruction: 0.854
-device: 0.853
-vnc: 0.851
-assembly: 0.841
-semantic: 0.835
-boot: 0.827
-graphic: 0.824
-network: 0.822
-socket: 0.820
-KVM: 0.817
-
-[Qemu-devel] 答复: Re:   答复: Re:  答复: Re: [BUG]COLO failover hang
-
-amost like wiki，but panic in Primary Node.
-
-
-
-
-setp:
-
-1 
-
-Primary Node.
-
-x86_64-softmmu/qemu-system-x86_64 -enable-kvm -boot c -m 2048 -smp 2 -qmp stdio 
--vnc :7 -name primary -cpu qemu64,+kvmclock -device piix3-usb-uhci -usb 
--usbdevice tablet\
-
-  -drive 
-if=virtio,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,
-
-   
-children.0.file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,children.0.driver=qcow2
- -S \
-
-  -netdev 
-tap,id=hn1,vhost=off,script=/etc/qemu-ifup2,downscript=/etc/qemu-ifdown2 \
-
-  -device e1000,id=e1,netdev=hn1,mac=52:a4:00:12:78:67 \
-
-  -netdev 
-tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown \
-
-  -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 \
-
-  -chardev socket,id=mirror0,host=9.61.1.8,port=9003,server,nowait -chardev 
-socket,id=compare1,host=9.61.1.8,port=9004,server,nowait \
-
-  -chardev socket,id=compare0,host=9.61.1.8,port=9001,server,nowait -chardev 
-socket,id=compare0-0,host=9.61.1.8,port=9001 \
-
-  -chardev socket,id=compare_out,host=9.61.1.8,port=9005,server,nowait \
-
-  -chardev socket,id=compare_out0,host=9.61.1.8,port=9005 \
-
-  -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 \
-
-  -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out 
--object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 \
-
-  -object 
-colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0
-
-2 Second node:
-
-x86_64-softmmu/qemu-system-x86_64 -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 
--name secondary -enable-kvm -cpu qemu64,+kvmclock -device piix3-usb-uhci -usb 
--usbdevice tablet\
-
-  -drive 
-if=none,id=colo-disk0,file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,driver=qcow2,node-name=node0
- \
-
-  -drive 
-if=virtio,id=active-disk0,driver=replication,mode=secondary,file.driver=qcow2,top-id=active-disk0,file.file.filename=/mnt/ramfstest/active_disk.img,file.backing.driver=qcow2,file.backing.file.filename=/mnt/ramfstest/hidden_disk.img,file.backing.backing=colo-disk0
-  \
-
-   -netdev 
-tap,id=hn1,vhost=off,script=/etc/qemu-ifup2,downscript=/etc/qemu-ifdown2 \
-
-  -device e1000,id=e1,netdev=hn1,mac=52:a4:00:12:78:67 \
-
-  -netdev 
-tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown \
-
-  -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 -chardev 
-socket,id=red0,host=9.61.1.8,port=9003 \
-
-  -chardev socket,id=red1,host=9.61.1.8,port=9004 \
-
-  -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 \
-
-  -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 \
-
-  -object filter-rewriter,id=rew0,netdev=hn0,queue=all -incoming tcp:0:8888
-
-3  Secondary node:
-
-{'execute':'qmp_capabilities'}
-
-{ 'execute': 'nbd-server-start',
-
-  'arguments': {'addr': {'type': 'inet', 'data': {'host': '9.61.1.7', 'port': 
-'8889'} } }
-
-}
-
-{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk0', 'writable': 
-true } }
-
-4:Primary Node：
-
-{'execute':'qmp_capabilities'}
-
-
-{ 'execute': 'human-monitor-command',
-
-  'arguments': {'command-line': 'drive_add -n buddy 
-driver=replication,mode=primary,file.driver=nbd,file.host=9.61.1.7,file.port=8889,file.export=colo-disk0,node-name=node0'}}
-
-{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', 'node': 
-'node0' } }
-
-{ 'execute': 'migrate-set-capabilities',
-
-      'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } 
-] } }
-
-{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:9.61.1.7:8888' } }
-
-
-
-
-then can see two runing VMs, whenever you make changes to PVM, SVM will be 
-synced.  
-
-
-
-
-5：Primary Node：
-
-echo c ＞ /proc/sysrq-trigger
-
-
-
-
-６：Secondary node:
-
-{ 'execute': 'nbd-server-stop' }
-
-{ "execute": "x-colo-lost-heartbeat" }
-
-
-
-
-then can see the Secondary node hang at recvmsg recvmsg .
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月21日 16:27
-主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
-
-
-
-
-
-Hi,
-
-On 2017/3/21 16:10, address@hidden wrote:
-＞ Thank you。
-＞
-＞ I have test aready。
-＞
-＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
-＞
-＞ Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node qemu 
-will not produce the problem,but Primary Node panic can。
-＞
-＞ I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-＞
-＞
-
-Yes, you are right, when we do failover for primary/secondary VM, we will 
-shutdown the related
-fd in case it is stuck in the read/write fd.
-
-It seems that you didn't follow the above introduction exactly to do the test. 
-Could you
-share your test procedures ? Especially the commands used in the test.
-
-Thanks,
-Hailiang
-
-＞ when failover,channel_shutdown could not shut down the channel.
-＞
-＞
-＞ so the colo_process_incoming_thread will hang at recvmsg.
-＞
-＞
-＞ I test a patch:
-＞
-＞
-＞ diff --git a/migration/socket.c b/migration/socket.c
-＞
-＞
-＞ index 13966f1..d65a0ea 100644
-＞
-＞
-＞ --- a/migration/socket.c
-＞
-＞
-＞ +++ b/migration/socket.c
-＞
-＞
-＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞
-＞
-＞       }
-＞
-＞
-＞
-＞
-＞
-＞       trace_migration_socket_incoming_accepted()
-＞
-＞
-＞
-＞
-＞
-＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-＞
-＞
-＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞
-＞
-＞       migration_channel_process_incoming(migrate_get_current(),
-＞
-＞
-＞                                          QIO_CHANNEL(sioc))
-＞
-＞
-＞       object_unref(OBJECT(sioc))
-＞
-＞
-＞
-＞
-＞ My test will not hang any more.
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞
-＞
-＞
-＞ 发件人： address@hidden
-＞ 收件人：王广10165992 address@hidden
-＞ 抄送人： address@hidden address@hidden
-＞ 日 期 ：2017年03月21日 15:58
-＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-＞
-＞
-＞
-＞
-＞
-＞ Hi,Wang.
-＞
-＞ You can test this branch:
-＞
-＞
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-＞
-＞ and please follow wiki ensure your own configuration correctly.
-＞
-＞
-http://wiki.qemu-project.org/Features/COLO
-＞
-＞
-＞ Thanks
-＞
-＞ Zhang Chen
-＞
-＞
-＞ On 03/21/2017 03:27 PM, address@hidden wrote:
-＞ ＞
-＞ ＞ hi.
-＞ ＞
-＞ ＞ I test the git qemu master have the same problem.
-＞ ＞
-＞ ＞ (gdb) bt
-＞ ＞
-＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞ ＞
-＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ ＞ (address@hidden, address@hidden "",
-＞ ＞ address@hidden, address@hidden) at io/channel.c:114
-＞ ＞
-＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞
-＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ ＞ migration/qemu-file.c:295
-＞ ＞
-＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ ＞ address@hidden) at migration/qemu-file.c:555
-＞ ＞
-＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ ＞ migration/qemu-file.c:568
-＞ ＞
-＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ ＞ migration/qemu-file.c:648
-＞ ＞
-＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ ＞ address@hidden) at migration/colo.c:244
-＞ ＞
-＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ ＞ out＞, address@hidden,
-＞ ＞ address@hidden)
-＞ ＞
-＞ ＞     at migration/colo.c:264
-＞ ＞
-＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞ ＞
-＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞
-＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞ ＞
-＞ ＞ (gdb) p ioc-＞name
-＞ ＞
-＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞ ＞
-＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞ ＞
-＞ ＞ $3 = 0
-＞ ＞
-＞ ＞
-＞ ＞ (gdb) bt
-＞ ＞
-＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞ ＞
-＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ ＞ gmain.c:3054
-＞ ＞
-＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ ＞ address@hidden) at gmain.c:3630
-＞ ＞
-＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞ ＞
-＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ ＞ util/main-loop.c:258
-＞ ＞
-＞ ＞ #5  main_loop_wait (address@hidden) at
-＞ ＞ util/main-loop.c:506
-＞ ＞
-＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞ ＞
-＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ ＞ out＞) at vl.c:4709
-＞ ＞
-＞ ＞ (gdb) p ioc-＞features
-＞ ＞
-＞ ＞ $1 = 6
-＞ ＞
-＞ ＞ (gdb) p ioc-＞name
-＞ ＞
-＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞ ＞
-＞ ＞
-＞ ＞ May be socket_accept_incoming_migration should
-＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞ ＞
-＞ ＞
-＞ ＞ thank you.
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ 原始邮件
-＞ ＞ address@hidden
-＞ ＞ address@hidden
-＞ ＞ address@hidden@huawei.com＞
-＞ ＞ *日 期 ：*2017年03月16日 14:46
-＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞ ＞
-＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞ ＞
-＞ ＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞ ＞ Do the colo have any plan for development?
-＞ ＞
-＞ ＞ Yes, We are developing. You can see some of patch we pushing.
-＞ ＞
-＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞ ＞
-＞ ＞ In our internal version can run it successfully,
-＞ ＞ The failover detail you can ask Zhanghailiang for help.
-＞ ＞ Next time if you have some question about COLO,
-＞ ＞ please cc me and zhanghailiang address@hidden
-＞ ＞
-＞ ＞
-＞ ＞ Thanks
-＞ ＞ Zhang Chen
-＞ ＞
-＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞ centos7.2+qemu2.7.50
-＞ ＞ ＞ (gdb) bt
-＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ ＞ ＞ io/channel-socket.c:497
-＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞ ＞ address@hidden "", address@hidden,
-＞ ＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞ ＞ migration/qemu-file.c:257
-＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞ ＞ migration/qemu-file.c:523
-＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞ ＞ migration/qemu-file.c:603
-＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞ ＞ address@hidden) at migration/colo..c:215
-＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞ ＞ migration/colo.c:546
-＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞ ＞ migration/colo.c:649
-＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞ --
-＞ ＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞ ＞
-＞ ＞
-＞ ＞ --
-＞ ＞ Thanks
-＞ ＞ Zhang Chen
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞
-
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-     }
-
-
- 
-
-
-     trace_migration_socket_incoming_accepted()
-
-
-    
-
-
-     qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-     migration_channel_process_incoming(migrate_get_current(),
-
-
-                                        QIO_CHANNEL(sioc))
-
-
-     object_unref(OBJECT(sioc))
-
-
-
-
-Is this patch ok? 
-
-I have test it . The test could not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人： address@hidden address@hidden
-抄送人： address@hidden address@hidden address@hidden
-日 期 ：2017年03月22日 09:11
-主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
-
-
-
-
-
-On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
-＞ * Hailiang Zhang (address@hidden) wrote:
-＞＞ Hi,
-＞＞
-＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-＞＞
-＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-＞＞ case COLO thread/incoming thread is stuck in read/write() while do failover,
-＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
-＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
-＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-＞＞
-＞＞ Cc: Dr. David Alan Gilbert address@hidden
-＞＞
-＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
-＞＞ if we tried to cancel migration.
-＞＞
-＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
-Error **errp)
-＞＞ {
-＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
-＞＞      migration_channel_connect(s, ioc, NULL)
-＞＞      ... ...
-＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-＞＞ and the
-＞＞ migrate_fd_cancel()
-＞＞ {
-＞＞   ... ...
-＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
-＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
-＞＞      }
-＞＞ }
-＞
-＞ (cc'd in Daniel Berrange).
-＞ I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN) 
-at the
-＞ top of qio_channel_socket_new  so I think that's safe isn't it?
-＞
-
-Hmm, you are right, this problem is only exist for the migration incoming fd, 
-thanks.
-
-＞ Dave
-＞
-＞＞ Thanks,
-＞＞ Hailiang
-＞＞
-＞＞ On 2017/3/21 16:10, address@hidden wrote:
-＞＞＞ Thank you。
-＞＞＞
-＞＞＞ I have test aready。
-＞＞＞
-＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
-＞＞＞
-＞＞＞ Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node 
-qemu will not produce the problem,but Primary Node panic can。
-＞＞＞
-＞＞＞ I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-＞＞＞
-＞＞＞
-＞＞＞ when failover,channel_shutdown could not shut down the channel.
-＞＞＞
-＞＞＞
-＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
-＞＞＞
-＞＞＞
-＞＞＞ I test a patch:
-＞＞＞
-＞＞＞
-＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ index 13966f1..d65a0ea 100644
-＞＞＞
-＞＞＞
-＞＞＞ --- a/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ +++ b/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞＞＞
-＞＞＞
-＞＞＞        }
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞        trace_migration_socket_incoming_accepted()
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-＞＞＞
-＞＞＞
-＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞＞＞
-＞＞＞
-＞＞＞        migration_channel_process_incoming(migrate_get_current(),
-＞＞＞
-＞＞＞
-＞＞＞                                           QIO_CHANNEL(sioc))
-＞＞＞
-＞＞＞
-＞＞＞        object_unref(OBJECT(sioc))
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ My test will not hang any more.
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ 原始邮件
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ 发件人： address@hidden
-＞＞＞ 收件人：王广10165992 address@hidden
-＞＞＞ 抄送人： address@hidden address@hidden
-＞＞＞ 日 期 ：2017年03月21日 15:58
-＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ Hi,Wang.
-＞＞＞
-＞＞＞ You can test this branch:
-＞＞＞
-＞＞＞
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-＞＞＞
-＞＞＞ and please follow wiki ensure your own configuration correctly.
-＞＞＞
-＞＞＞
-http://wiki.qemu-project.org/Features/COLO
-＞＞＞
-＞＞＞
-＞＞＞ Thanks
-＞＞＞
-＞＞＞ Zhang Chen
-＞＞＞
-＞＞＞
-＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
-＞＞＞ ＞
-＞＞＞ ＞ hi.
-＞＞＞ ＞
-＞＞＞ ＞ I test the git qemu master have the same problem.
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) bt
-＞＞＞ ＞
-＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞＞＞ ＞
-＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞＞＞ ＞ (address@hidden, address@hidden "",
-＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
-＞＞＞ ＞
-＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞＞＞ ＞ migration/qemu-file-channel.c:78
-＞＞＞ ＞
-＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞＞＞ ＞ migration/qemu-file.c:295
-＞＞＞ ＞
-＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
-＞＞＞ ＞
-＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞＞＞ ＞ migration/qemu-file.c:568
-＞＞＞ ＞
-＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞＞＞ ＞ migration/qemu-file.c:648
-＞＞＞ ＞
-＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞＞＞ ＞ address@hidden) at migration/colo.c:244
-＞＞＞ ＞
-＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞＞＞ ＞ out＞, address@hidden,
-＞＞＞ ＞ address@hidden)
-＞＞＞ ＞
-＞＞＞ ＞     at migration/colo.c:264
-＞＞＞ ＞
-＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞＞＞ ＞
-＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞＞＞ ＞
-＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞name
-＞＞＞ ＞
-＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞＞＞ ＞
-＞＞＞ ＞ $3 = 0
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) bt
-＞＞＞ ＞
-＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞＞＞ ＞
-＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞＞＞ ＞ gmain.c:3054
-＞＞＞ ＞
-＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞＞＞ ＞ address@hidden) at gmain.c:3630
-＞＞＞ ＞
-＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞＞＞ ＞
-＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞＞＞ ＞ util/main-loop.c:258
-＞＞＞ ＞
-＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
-＞＞＞ ＞ util/main-loop.c:506
-＞＞＞ ＞
-＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞＞＞ ＞
-＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞＞＞ ＞ out＞) at vl.c:4709
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞features
-＞＞＞ ＞
-＞＞＞ ＞ $1 = 6
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞name
-＞＞＞ ＞
-＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ May be socket_accept_incoming_migration should
-＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ thank you.
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ 原始邮件
-＞＞＞ ＞ address@hidden
-＞＞＞ ＞ address@hidden
-＞＞＞ ＞ address@hidden@huawei.com＞
-＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
-＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞＞＞ ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
-＞＞＞ ＞ ＞ Do the colo have any plan for development?
-＞＞＞ ＞
-＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
-＞＞＞ ＞
-＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞＞＞ ＞
-＞＞＞ ＞ In our internal version can run it successfully,
-＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
-＞＞＞ ＞ Next time if you have some question about COLO,
-＞＞＞ ＞ please cc me and zhanghailiang address@hidden
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ Thanks
-＞＞＞ ＞ Zhang Chen
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
-＞＞＞ ＞ ＞ (gdb) bt
-＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) 
-at
-＞＞＞ ＞ ＞ io/channel-socket.c:497
-＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞＞＞ ＞ ＞ address@hidden "", address@hidden,
-＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
-＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
-＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:257
-＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:523
-＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:603
-＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
-＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞＞＞ ＞ ＞ migration/colo.c:546
-＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞＞＞ ＞ ＞ migration/colo.c:649
-＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ --
-＞＞＞ ＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ --
-＞＞＞ ＞ Thanks
-＞＞＞ ＞ Zhang Chen
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞
-＞＞
-＞ --
-＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
-＞
-＞ .
-＞
-
-Hi,
-
-On 2017/3/22 9:42, address@hidden wrote:
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-      }
-
-
-
-
-
-      trace_migration_socket_incoming_accepted()
-
-
-
-
-
-      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-      migration_channel_process_incoming(migrate_get_current(),
-
-
-                                         QIO_CHANNEL(sioc))
-
-
-      object_unref(OBJECT(sioc))
-
-
-
-
-Is this patch ok?
-Yes, i think this works, but a better way maybe to call 
-qio_channel_set_feature()
-in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
-socket accept fd,
-Or fix it by this:
-
-diff --git a/io/channel-socket.c b/io/channel-socket.c
-index f546c68..ce6894c 100644
---- a/io/channel-socket.c
-+++ b/io/channel-socket.c
-@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
-                           Error **errp)
- {
-     QIOChannelSocket *cioc;
--
--    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET));
--    cioc->fd = -1;
-+
-+    cioc = qio_channel_socket_new();
-     cioc->remoteAddrLen = sizeof(ioc->remoteAddr);
-     cioc->localAddrLen = sizeof(ioc->localAddr);
-
-
-Thanks,
-Hailiang
-I have test it . The test could not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人： address@hidden address@hidden
-抄送人： address@hidden address@hidden address@hidden
-日 期 ：2017年03月22日 09:11
-主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
-
-
-
-
-
-On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
-＞ * Hailiang Zhang (address@hidden) wrote:
-＞＞ Hi,
-＞＞
-＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-＞＞
-＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-＞＞ case COLO thread/incoming thread is stuck in read/write() while do failover,
-＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
-＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
-＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-＞＞
-＞＞ Cc: Dr. David Alan Gilbert address@hidden
-＞＞
-＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
-＞＞ if we tried to cancel migration.
-＞＞
-＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
-Error **errp)
-＞＞ {
-＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
-＞＞      migration_channel_connect(s, ioc, NULL)
-＞＞      ... ...
-＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-＞＞ and the
-＞＞ migrate_fd_cancel()
-＞＞ {
-＞＞   ... ...
-＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
-＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
-＞＞      }
-＞＞ }
-＞
-＞ (cc'd in Daniel Berrange).
-＞ I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN) 
-at the
-＞ top of qio_channel_socket_new  so I think that's safe isn't it?
-＞
-
-Hmm, you are right, this problem is only exist for the migration incoming fd, 
-thanks.
-
-＞ Dave
-＞
-＞＞ Thanks,
-＞＞ Hailiang
-＞＞
-＞＞ On 2017/3/21 16:10, address@hidden wrote:
-＞＞＞ Thank you。
-＞＞＞
-＞＞＞ I have test aready。
-＞＞＞
-＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
-＞＞＞
-＞＞＞ Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node 
-qemu will not produce the problem,but Primary Node panic can。
-＞＞＞
-＞＞＞ I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-＞＞＞
-＞＞＞
-＞＞＞ when failover,channel_shutdown could not shut down the channel.
-＞＞＞
-＞＞＞
-＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
-＞＞＞
-＞＞＞
-＞＞＞ I test a patch:
-＞＞＞
-＞＞＞
-＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ index 13966f1..d65a0ea 100644
-＞＞＞
-＞＞＞
-＞＞＞ --- a/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ +++ b/migration/socket.c
-＞＞＞
-＞＞＞
-＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
-socket_accept_incoming_migration(QIOChannel *ioc,
-＞＞＞
-＞＞＞
-＞＞＞        }
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞        trace_migration_socket_incoming_accepted()
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-＞＞＞
-＞＞＞
-＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN)
-＞＞＞
-＞＞＞
-＞＞＞        migration_channel_process_incoming(migrate_get_current(),
-＞＞＞
-＞＞＞
-＞＞＞                                           QIO_CHANNEL(sioc))
-＞＞＞
-＞＞＞
-＞＞＞        object_unref(OBJECT(sioc))
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ My test will not hang any more.
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ 原始邮件
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ 发件人： address@hidden
-＞＞＞ 收件人：王广10165992 address@hidden
-＞＞＞ 抄送人： address@hidden address@hidden
-＞＞＞ 日 期 ：2017年03月21日 15:58
-＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞
-＞＞＞ Hi,Wang.
-＞＞＞
-＞＞＞ You can test this branch:
-＞＞＞
-＞＞＞
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-＞＞＞
-＞＞＞ and please follow wiki ensure your own configuration correctly.
-＞＞＞
-＞＞＞
-http://wiki.qemu-project.org/Features/COLO
-＞＞＞
-＞＞＞
-＞＞＞ Thanks
-＞＞＞
-＞＞＞ Zhang Chen
-＞＞＞
-＞＞＞
-＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
-＞＞＞ ＞
-＞＞＞ ＞ hi.
-＞＞＞ ＞
-＞＞＞ ＞ I test the git qemu master have the same problem.
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) bt
-＞＞＞ ＞
-＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞＞＞ ＞
-＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞＞＞ ＞ (address@hidden, address@hidden "",
-＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
-＞＞＞ ＞
-＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞＞＞ ＞ migration/qemu-file-channel.c:78
-＞＞＞ ＞
-＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞＞＞ ＞ migration/qemu-file.c:295
-＞＞＞ ＞
-＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
-＞＞＞ ＞
-＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞＞＞ ＞ migration/qemu-file.c:568
-＞＞＞ ＞
-＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞＞＞ ＞ migration/qemu-file.c:648
-＞＞＞ ＞
-＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞＞＞ ＞ address@hidden) at migration/colo.c:244
-＞＞＞ ＞
-＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞＞＞ ＞ out＞, address@hidden,
-＞＞＞ ＞ address@hidden)
-＞＞＞ ＞
-＞＞＞ ＞     at migration/colo.c:264
-＞＞＞ ＞
-＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞＞＞ ＞
-＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞＞＞ ＞
-＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞name
-＞＞＞ ＞
-＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞＞＞ ＞
-＞＞＞ ＞ $3 = 0
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) bt
-＞＞＞ ＞
-＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞＞＞ ＞
-＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞＞＞ ＞ gmain.c:3054
-＞＞＞ ＞
-＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞＞＞ ＞ address@hidden) at gmain.c:3630
-＞＞＞ ＞
-＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞＞＞ ＞
-＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞＞＞ ＞ util/main-loop.c:258
-＞＞＞ ＞
-＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
-＞＞＞ ＞ util/main-loop.c:506
-＞＞＞ ＞
-＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞＞＞ ＞
-＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞＞＞ ＞ out＞) at vl.c:4709
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞features
-＞＞＞ ＞
-＞＞＞ ＞ $1 = 6
-＞＞＞ ＞
-＞＞＞ ＞ (gdb) p ioc-＞name
-＞＞＞ ＞
-＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ May be socket_accept_incoming_migration should
-＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ thank you.
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ 原始邮件
-＞＞＞ ＞ address@hidden
-＞＞＞ ＞ address@hidden
-＞＞＞ ＞ address@hidden@huawei.com＞
-＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
-＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞＞＞ ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
-＞＞＞ ＞ ＞ Do the colo have any plan for development?
-＞＞＞ ＞
-＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
-＞＞＞ ＞
-＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞＞＞ ＞
-＞＞＞ ＞ In our internal version can run it successfully,
-＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
-＞＞＞ ＞ Next time if you have some question about COLO,
-＞＞＞ ＞ please cc me and zhanghailiang address@hidden
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ Thanks
-＞＞＞ ＞ Zhang Chen
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
-＞＞＞ ＞ ＞ (gdb) bt
-＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) 
-at
-＞＞＞ ＞ ＞ io/channel-socket.c:497
-＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞＞＞ ＞ ＞ address@hidden "", address@hidden,
-＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
-＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
-＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:257
-＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:523
-＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞＞＞ ＞ ＞ migration/qemu-file.c:603
-＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
-＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞＞＞ ＞ ＞ migration/colo.c:546
-＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞＞＞ ＞ ＞ migration/colo.c:649
-＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞ --
-＞＞＞ ＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞ --
-＞＞＞ ＞ Thanks
-＞＞＞ ＞ Zhang Chen
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞ ＞
-＞＞＞
-＞＞
-＞ --
-＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
-＞
-＞ .
-＞
-
diff --git a/results/classifier/005/other/59540920 b/results/classifier/005/other/59540920
deleted file mode 100644
index ae43e07c..00000000
--- a/results/classifier/005/other/59540920
+++ /dev/null
@@ -1,384 +0,0 @@
-other: 0.989
-instruction: 0.986
-graphic: 0.985
-device: 0.985
-semantic: 0.985
-assembly: 0.984
-socket: 0.983
-network: 0.981
-boot: 0.980
-mistranslation: 0.978
-vnc: 0.977
-KVM: 0.970
-
-[BUG] No irqchip created after commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property")
-
-I apologize if this was already reported,
-
-I just noticed that with the latest updates QEMU doesn't start with the
-following configuration:
-
-qemu-system-x86_64 -name guest=win10 -machine pc,accel=kvm -cpu 
-host,hv_vpindex,hv_synic ...
-
-qemu-system-x86_64: failed to turn on HyperV SynIC in KVM: Invalid argument
-qemu-system-x86_64: kvm_init_vcpu failed: Invalid argument
-
-If I add 'kernel-irqchip=split' or ',kernel-irqchip=on' it starts as
-usual. I bisected this to the following commit:
-
-commit 11bc4a13d1f4b07dafbd1dda4d4bf0fdd7ad65f2 (HEAD, refs/bisect/bad)
-Author: Paolo Bonzini <address@hidden>
-Date:   Wed Nov 13 10:56:53 2019 +0100
-
-    kvm: convert "-machine kernel_irqchip" to an accelerator property
-    
-so aparently we now default to 'kernel_irqchip=off'. Is this the desired
-behavior?
-
--- 
-Vitaly
-
-No, absolutely not. I was sure I had tested it, but I will take a look.
-Paolo
-Il ven 20 dic 2019, 15:11 Vitaly Kuznetsov <
-address@hidden
-> ha scritto:
-I apologize if this was already reported,
-I just noticed that with the latest updates QEMU doesn't start with the
-following configuration:
-qemu-system-x86_64 -name guest=win10 -machine pc,accel=kvm -cpu host,hv_vpindex,hv_synic ...
-qemu-system-x86_64: failed to turn on HyperV SynIC in KVM: Invalid argument
-qemu-system-x86_64: kvm_init_vcpu failed: Invalid argument
-If I add 'kernel-irqchip=split' or ',kernel-irqchip=on' it starts as
-usual. I bisected this to the following commit:
-commit 11bc4a13d1f4b07dafbd1dda4d4bf0fdd7ad65f2 (HEAD, refs/bisect/bad)
-Author: Paolo Bonzini <
-address@hidden
->
-Date:   Wed Nov 13 10:56:53 2019 +0100
-    kvm: convert "-machine kernel_irqchip" to an accelerator property
-so aparently we now default to 'kernel_irqchip=off'. Is this the desired
-behavior?
---
-Vitaly
-
-Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
-accelerator property") moves kernel_irqchip property from "-machine" to
-"-accel kvm", but it forgets to set the default value of
-kernel_irqchip_allowed and kernel_irqchip_split.
-
-Also cleaning up the three useless members (kernel_irqchip_allowed,
-kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
-
-Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator 
-property")
-Signed-off-by: Xiaoyao Li <address@hidden>
----
- accel/kvm/kvm-all.c | 3 +++
- include/hw/boards.h | 3 ---
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
-index b2f1a5bcb5ef..40f74094f8d3 100644
---- a/accel/kvm/kvm-all.c
-+++ b/accel/kvm/kvm-all.c
-@@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
- static void kvm_accel_instance_init(Object *obj)
- {
-     KVMState *s = KVM_STATE(obj);
-+    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
- 
-     s->kvm_shadow_mem = -1;
-+    s->kernel_irqchip_allowed = true;
-+    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
- }
- 
- static void kvm_accel_class_init(ObjectClass *oc, void *data)
-diff --git a/include/hw/boards.h b/include/hw/boards.h
-index 61f8bb8e5a42..fb1b43d5b972 100644
---- a/include/hw/boards.h
-+++ b/include/hw/boards.h
-@@ -271,9 +271,6 @@ struct MachineState {
- 
-     /*< public >*/
- 
--    bool kernel_irqchip_allowed;
--    bool kernel_irqchip_required;
--    bool kernel_irqchip_split;
-     char *dtb;
-     char *dumpdtb;
-     int phandle_start;
--- 
-2.19.1
-
-Il sab 28 dic 2019, 09:48 Xiaoyao Li <
-address@hidden
-> ha scritto:
-Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
-accelerator property") moves kernel_irqchip property from "-machine" to
-"-accel kvm", but it forgets to set the default value of
-kernel_irqchip_allowed and kernel_irqchip_split.
-Also cleaning up the three useless members (kernel_irqchip_allowed,
-kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
-Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property")
-Signed-off-by: Xiaoyao Li <
-address@hidden
->
-Please also add a Reported-by line for Vitaly Kuznetsov.
----
- accel/kvm/kvm-all.c | 3 +++
- include/hw/boards.h | 3 ---
- 2 files changed, 3 insertions(+), 3 deletions(-)
-diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
-index b2f1a5bcb5ef..40f74094f8d3 100644
---- a/accel/kvm/kvm-all.c
-+++ b/accel/kvm/kvm-all.c
-@@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
- static void kvm_accel_instance_init(Object *obj)
- {
-     KVMState *s = KVM_STATE(obj);
-+    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
-     s->kvm_shadow_mem = -1;
-+    s->kernel_irqchip_allowed = true;
-+    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
-Can you initialize this from the init_machine method instead of assuming that current_machine has been initialized earlier?
-Thanks for the quick fix!
-Paolo
- }
- static void kvm_accel_class_init(ObjectClass *oc, void *data)
-diff --git a/include/hw/boards.h b/include/hw/boards.h
-index 61f8bb8e5a42..fb1b43d5b972 100644
---- a/include/hw/boards.h
-+++ b/include/hw/boards.h
-@@ -271,9 +271,6 @@ struct MachineState {
-     /*< public >*/
--    bool kernel_irqchip_allowed;
--    bool kernel_irqchip_required;
--    bool kernel_irqchip_split;
-     char *dtb;
-     char *dumpdtb;
-     int phandle_start;
---
-2.19.1
-
-On Sat, 2019-12-28 at 10:02 +0000, Paolo Bonzini wrote:
->
->
->
-Il sab 28 dic 2019, 09:48 Xiaoyao Li <address@hidden> ha scritto:
->
-> Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
->
-> accelerator property") moves kernel_irqchip property from "-machine" to
->
-> "-accel kvm", but it forgets to set the default value of
->
-> kernel_irqchip_allowed and kernel_irqchip_split.
->
->
->
-> Also cleaning up the three useless members (kernel_irqchip_allowed,
->
-> kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
->
->
->
-> Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
->
-> accelerator property")
->
-> Signed-off-by: Xiaoyao Li <address@hidden>
->
->
-Please also add a Reported-by line for Vitaly Kuznetsov.
-Sure.
-
->
-> ---
->
->  accel/kvm/kvm-all.c | 3 +++
->
->  include/hw/boards.h | 3 ---
->
->  2 files changed, 3 insertions(+), 3 deletions(-)
->
->
->
-> diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
->
-> index b2f1a5bcb5ef..40f74094f8d3 100644
->
-> --- a/accel/kvm/kvm-all.c
->
-> +++ b/accel/kvm/kvm-all.c
->
-> @@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
->
->  static void kvm_accel_instance_init(Object *obj)
->
->  {
->
->      KVMState *s = KVM_STATE(obj);
->
-> +    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
->
->
->
->      s->kvm_shadow_mem = -1;
->
-> +    s->kernel_irqchip_allowed = true;
->
-> +    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
->
->
-Can you initialize this from the init_machine method instead of assuming that
->
-current_machine has been initialized earlier?
-OK, will do it in v2.
-
->
-Thanks for the quick fix!
-BTW, it seems that this patch makes kernel_irqchip default on to workaround the
-bug. 
-However, when explicitly configuring kernel_irqchip=off, guest still fails
-booting due to "KVM: failed to send PV IPI: -95" with a latest upstream kernel
-ubuntu guest. Any idea about this? 
-
->
-Paolo
->
->  }
->
->
->
->  static void kvm_accel_class_init(ObjectClass *oc, void *data)
->
-> diff --git a/include/hw/boards.h b/include/hw/boards.h
->
-> index 61f8bb8e5a42..fb1b43d5b972 100644
->
-> --- a/include/hw/boards.h
->
-> +++ b/include/hw/boards.h
->
-> @@ -271,9 +271,6 @@ struct MachineState {
->
->
->
->      /*< public >*/
->
->
->
-> -    bool kernel_irqchip_allowed;
->
-> -    bool kernel_irqchip_required;
->
-> -    bool kernel_irqchip_split;
->
->      char *dtb;
->
->      char *dumpdtb;
->
->      int phandle_start;
-
-Il sab 28 dic 2019, 10:24 Xiaoyao Li <
-address@hidden
-> ha scritto:
-BTW, it seems that this patch makes kernel_irqchip default on to workaround the
-bug.
-However, when explicitly configuring kernel_irqchip=off, guest still fails
-booting due to "KVM: failed to send PV IPI: -95" with a latest upstream kernel
-ubuntu guest. Any idea about this?
-We need to clear the PV IPI feature for userspace irqchip. Are you using -cpu host by chance?
-Paolo
-> Paolo
-> >  }
-> >
-> >  static void kvm_accel_class_init(ObjectClass *oc, void *data)
-> > diff --git a/include/hw/boards.h b/include/hw/boards.h
-> > index 61f8bb8e5a42..fb1b43d5b972 100644
-> > --- a/include/hw/boards.h
-> > +++ b/include/hw/boards.h
-> > @@ -271,9 +271,6 @@ struct MachineState {
-> >
-> >      /*< public >*/
-> >
-> > -    bool kernel_irqchip_allowed;
-> > -    bool kernel_irqchip_required;
-> > -    bool kernel_irqchip_split;
-> >      char *dtb;
-> >      char *dumpdtb;
-> >      int phandle_start;
-
-On Sat, 2019-12-28 at 10:57 +0000, Paolo Bonzini wrote:
->
->
->
-Il sab 28 dic 2019, 10:24 Xiaoyao Li <address@hidden> ha scritto:
->
-> BTW, it seems that this patch makes kernel_irqchip default on to workaround
->
-> the
->
-> bug.
->
-> However, when explicitly configuring kernel_irqchip=off, guest still fails
->
-> booting due to "KVM: failed to send PV IPI: -95" with a latest upstream
->
-> kernel
->
-> ubuntu guest. Any idea about this?
->
->
-We need to clear the PV IPI feature for userspace irqchip. Are you using -cpu
->
-host by chance?
-Yes, I used -cpu host.
-
-After using "-cpu host,-kvm-pv-ipi" with kernel_irqchip=off, it can boot
-successfully.
-
->
-Paolo
->
->
-> > Paolo
->
-> > >  }
->
-> > >
->
-> > >  static void kvm_accel_class_init(ObjectClass *oc, void *data)
->
-> > > diff --git a/include/hw/boards.h b/include/hw/boards.h
->
-> > > index 61f8bb8e5a42..fb1b43d5b972 100644
->
-> > > --- a/include/hw/boards.h
->
-> > > +++ b/include/hw/boards.h
->
-> > > @@ -271,9 +271,6 @@ struct MachineState {
->
-> > >
->
-> > >      /*< public >*/
->
-> > >
->
-> > > -    bool kernel_irqchip_allowed;
->
-> > > -    bool kernel_irqchip_required;
->
-> > > -    bool kernel_irqchip_split;
->
-> > >      char *dtb;
->
-> > >      char *dumpdtb;
->
-> > >      int phandle_start;
->
->
-
diff --git a/results/classifier/005/other/64571620 b/results/classifier/005/other/64571620
deleted file mode 100644
index e6da5ef4..00000000
--- a/results/classifier/005/other/64571620
+++ /dev/null
@@ -1,793 +0,0 @@
-other: 0.922
-mistranslation: 0.917
-assembly: 0.913
-semantic: 0.903
-device: 0.899
-graphic: 0.897
-instruction: 0.894
-boot: 0.879
-KVM: 0.867
-socket: 0.855
-network: 0.853
-vnc: 0.819
-
-[BUG] Migration hv_time rollback
-
-Hi,
-
-We are experiencing timestamp rollbacks during live-migration of
-Windows 10 guests with the following qemu configuration (linux 5.4.46
-and qemu master):
-```
-$ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
-```
-
-I have tracked the bug to the fact that `kvmclock` is not exposed and
-disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
-
-I think we should enable the `kvmclock` (qemu device) if `hv-time` is
-present and add Hyper-V support for the `kvmclock_current_nsec`
-function.
-
-I'm asking for advice because I am unsure this is the _right_ approach
-and how to keep migration compatibility between qemu versions.
-
-Thank you all,
-
--- 
-Antoine 'xdbob' Damhet
-signature.asc
-Description:
-PGP signature
-
-cc'ing in Vitaly who knows about the hv stuff.
-
-* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
-Hi,
->
->
-We are experiencing timestamp rollbacks during live-migration of
->
-Windows 10 guests with the following qemu configuration (linux 5.4.46
->
-and qemu master):
->
-```
->
-$ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
-```
-How big a jump are you seeing, and how did you notice it in the guest?
-
-Dave
-
->
-I have tracked the bug to the fact that `kvmclock` is not exposed and
->
-disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->
-I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
-present and add Hyper-V support for the `kvmclock_current_nsec`
->
-function.
->
->
-I'm asking for advice because I am unsure this is the _right_ approach
->
-and how to keep migration compatibility between qemu versions.
->
->
-Thank you all,
->
->
---
->
-Antoine 'xdbob' Damhet
--- 
-Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
-
-"Dr. David Alan Gilbert" <dgilbert@redhat.com> writes:
-
->
-cc'ing in Vitaly who knows about the hv stuff.
->
-cc'ing Marcelo who knows about clocksources :-)
-
->
-* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
-> Hi,
->
->
->
-> We are experiencing timestamp rollbacks during live-migration of
->
-> Windows 10 guests
-Are you migrating to the same hardware (with the same TSC frequency)? Is
-TSC used as the clocksource on the host?
-
->
->  with the following qemu configuration (linux 5.4.46
->
-> and qemu master):
->
-> ```
->
-> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
-> ```
-Out of pure curiosity, what's the purpose of doing 'kvm=off'? Windows is
-not going to check for KVM identification anyway so we pretend we're
-Hyper-V. 
-
-Also, have you tried adding more Hyper-V enlightenments? 
-
->
->
-How big a jump are you seeing, and how did you notice it in the guest?
->
->
-Dave
->
->
-> I have tracked the bug to the fact that `kvmclock` is not exposed and
->
-> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->
->
-> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
-> present and add Hyper-V support for the `kvmclock_current_nsec`
->
-> function.
-AFAICT kvmclock_current_nsec() checks whether kvmclock was enabled by
-the guest:
-
-   if (!(env->system_time_msr & 1ULL)) {
-        /* KVM clock not active */
-        return 0;
-    }
-
-and this is (and way) always false for Windows guests.
-
->
->
->
-> I'm asking for advice because I am unsure this is the _right_ approach
->
-> and how to keep migration compatibility between qemu versions.
->
->
->
-> Thank you all,
->
->
->
-> --
->
-> Antoine 'xdbob' Damhet
--- 
-Vitaly
-
-On Wed, Sep 16, 2020 at 01:59:43PM +0200, Vitaly Kuznetsov wrote:
->
-"Dr. David Alan Gilbert" <dgilbert@redhat.com> writes:
->
->
-> cc'ing in Vitaly who knows about the hv stuff.
->
->
->
->
-cc'ing Marcelo who knows about clocksources :-)
->
->
-> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
->> Hi,
->
->>
->
->> We are experiencing timestamp rollbacks during live-migration of
->
->> Windows 10 guests
->
->
-Are you migrating to the same hardware (with the same TSC frequency)? Is
->
-TSC used as the clocksource on the host?
-Yes we are migrating to the exact same hardware. And yes TSC is used as
-a clocksource in the host (but the bug is still happening with `hpet` as
-a clocksource).
-
->
->
->>  with the following qemu configuration (linux 5.4.46
->
->> and qemu master):
->
->> ```
->
->> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
->> ```
->
->
-Out of pure curiosity, what's the purpose of doing 'kvm=off'? Windows is
->
-not going to check for KVM identification anyway so we pretend we're
->
-Hyper-V.
-Some softwares explicitly checks for the presence of KVM and then crash
-if they find it in CPUID :/
-
->
->
-Also, have you tried adding more Hyper-V enlightenments?
-Yes, I published a stripped-down command-line for a minimal reproducer
-but even `hv-frequencies` and `hv-reenlightenment` don't help.
-
->
->
->
->
-> How big a jump are you seeing, and how did you notice it in the guest?
->
->
->
-> Dave
->
->
->
->> I have tracked the bug to the fact that `kvmclock` is not exposed and
->
->> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->>
->
->> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
->> present and add Hyper-V support for the `kvmclock_current_nsec`
->
->> function.
->
->
-AFAICT kvmclock_current_nsec() checks whether kvmclock was enabled by
->
-the guest:
->
->
-if (!(env->system_time_msr & 1ULL)) {
->
-/* KVM clock not active */
->
-return 0;
->
-}
->
->
-and this is (and way) always false for Windows guests.
-Hooo, I missed this piece. When is `clock_is_reliable` expected to be
-false ? Because if it is I still think we should be able to query at
-least `HV_X64_MSR_REFERENCE_TSC`
-
->
->
->>
->
->> I'm asking for advice because I am unsure this is the _right_ approach
->
->> and how to keep migration compatibility between qemu versions.
->
->>
->
->> Thank you all,
->
->>
->
->> --
->
->> Antoine 'xdbob' Damhet
->
->
---
->
-Vitaly
->
--- 
-Antoine 'xdbob' Damhet
-signature.asc
-Description:
-PGP signature
-
-On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
->
-cc'ing in Vitaly who knows about the hv stuff.
-Thanks
-
->
->
-* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
-> Hi,
->
->
->
-> We are experiencing timestamp rollbacks during live-migration of
->
-> Windows 10 guests with the following qemu configuration (linux 5.4.46
->
-> and qemu master):
->
-> ```
->
-> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
-> ```
->
->
-How big a jump are you seeing, and how did you notice it in the guest?
-I'm seeing jumps of about the guest uptime (indicating a reset of the
-counter). It's expected because we won't call `KVM_SET_CLOCK` to
-restore any value.
-
-We first noticed it because after some migrations `dwm.exe` crashes with
-the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
-the past." error code.
-
-I can also confirm the following hack makes the behavior disappear:
-
-```
-diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
-index 64283358f9..f334bdf35f 100644
---- a/hw/i386/kvm/clock.c
-+++ b/hw/i386/kvm/clock.c
-@@ -332,11 +332,7 @@ void kvmclock_create(void)
- {
-     X86CPU *cpu = X86_CPU(first_cpu);
-
--    if (kvm_enabled() &&
--        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
--                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
--        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
--    }
-+    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
- }
-
- static void kvmclock_register_types(void)
-diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
-index 32b1453e6a..11d980ba85 100644
---- a/hw/i386/pc_piix.c
-+++ b/hw/i386/pc_piix.c
-@@ -158,9 +158,7 @@ static void pc_init1(MachineState *machine,
-
-     x86_cpus_init(x86ms, pcmc->default_cpu_version);
-
--    if (kvm_enabled() && pcmc->kvmclock_enabled) {
--        kvmclock_create();
--    }
-+    kvmclock_create();
-
-     if (pcmc->pci_enabled) {
-         pci_memory = g_new(MemoryRegion, 1);
-```
-
->
->
-Dave
->
->
-> I have tracked the bug to the fact that `kvmclock` is not exposed and
->
-> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->
->
-> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
-> present and add Hyper-V support for the `kvmclock_current_nsec`
->
-> function.
->
->
->
-> I'm asking for advice because I am unsure this is the _right_ approach
->
-> and how to keep migration compatibility between qemu versions.
->
->
->
-> Thank you all,
->
->
->
-> --
->
-> Antoine 'xdbob' Damhet
->
->
->
---
->
-Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
->
--- 
-Antoine 'xdbob' Damhet
-signature.asc
-Description:
-PGP signature
-
-Antoine Damhet <antoine.damhet@blade-group.com> writes:
-
->
-On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
->
-> cc'ing in Vitaly who knows about the hv stuff.
->
->
-Thanks
->
->
->
->
-> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
-> > Hi,
->
-> >
->
-> > We are experiencing timestamp rollbacks during live-migration of
->
-> > Windows 10 guests with the following qemu configuration (linux 5.4.46
->
-> > and qemu master):
->
-> > ```
->
-> > $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
-> > ```
->
->
->
-> How big a jump are you seeing, and how did you notice it in the guest?
->
->
-I'm seeing jumps of about the guest uptime (indicating a reset of the
->
-counter). It's expected because we won't call `KVM_SET_CLOCK` to
->
-restore any value.
->
->
-We first noticed it because after some migrations `dwm.exe` crashes with
->
-the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
->
-the past." error code.
->
->
-I can also confirm the following hack makes the behavior disappear:
->
->
-```
->
-diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
->
-index 64283358f9..f334bdf35f 100644
->
---- a/hw/i386/kvm/clock.c
->
-+++ b/hw/i386/kvm/clock.c
->
-@@ -332,11 +332,7 @@ void kvmclock_create(void)
->
-{
->
-X86CPU *cpu = X86_CPU(first_cpu);
->
->
--    if (kvm_enabled() &&
->
--        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
->
--                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
->
--        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
->
--    }
->
-+    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
->
-}
->
-Oh, I think I see what's going on. When you add 'kvm=off'
-cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
-kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
-migration.
-
-In case we really want to support 'kvm=off' I think we can add Hyper-V
-features check here along with KVM, this should do the job.
-
--- 
-Vitaly
-
-Vitaly Kuznetsov <vkuznets@redhat.com> writes:
-
->
-Antoine Damhet <antoine.damhet@blade-group.com> writes:
->
->
-> On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
->
->> cc'ing in Vitaly who knows about the hv stuff.
->
->
->
-> Thanks
->
->
->
->>
->
->> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
->
->> > Hi,
->
->> >
->
->> > We are experiencing timestamp rollbacks during live-migration of
->
->> > Windows 10 guests with the following qemu configuration (linux 5.4.46
->
->> > and qemu master):
->
->> > ```
->
->> > $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
->
->> > ```
->
->>
->
->> How big a jump are you seeing, and how did you notice it in the guest?
->
->
->
-> I'm seeing jumps of about the guest uptime (indicating a reset of the
->
-> counter). It's expected because we won't call `KVM_SET_CLOCK` to
->
-> restore any value.
->
->
->
-> We first noticed it because after some migrations `dwm.exe` crashes with
->
-> the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
->
-> the past." error code.
->
->
->
-> I can also confirm the following hack makes the behavior disappear:
->
->
->
-> ```
->
-> diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
->
-> index 64283358f9..f334bdf35f 100644
->
-> --- a/hw/i386/kvm/clock.c
->
-> +++ b/hw/i386/kvm/clock.c
->
-> @@ -332,11 +332,7 @@ void kvmclock_create(void)
->
->  {
->
->      X86CPU *cpu = X86_CPU(first_cpu);
->
->
->
-> -    if (kvm_enabled() &&
->
-> -        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
->
-> -                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2)))
->
-> {
->
-> -        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
->
-> -    }
->
-> +    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
->
->  }
->
->
->
->
->
-Oh, I think I see what's going on. When you add 'kvm=off'
->
-cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
->
-kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
->
-migration.
->
->
-In case we really want to support 'kvm=off' I think we can add Hyper-V
->
-features check here along with KVM, this should do the job.
-Does the untested
-
-diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
-index 64283358f91d..e03b2ca6d8f6 100644
---- a/hw/i386/kvm/clock.c
-+++ b/hw/i386/kvm/clock.c
-@@ -333,8 +333,9 @@ void kvmclock_create(void)
-     X86CPU *cpu = X86_CPU(first_cpu);
- 
-     if (kvm_enabled() &&
--        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
--                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
-+        ((cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
-+                                         (1ULL << KVM_FEATURE_CLOCKSOURCE2))) 
-||
-+         (cpu->env.features[FEAT_HYPERV_EAX] & HV_TIME_REF_COUNT_AVAILABLE))) {
-         sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
-     }
- }
-
-help?
-
-(I don't think we need to remove all 'if (kvm_enabled())' checks from
-machine types as 'kvm=off' should not be related).
-
--- 
-Vitaly
-
-On Wed, Sep 16, 2020 at 02:50:56PM +0200, Vitaly Kuznetsov wrote:
-[...]
-
->
->>
->
->
->
->
->
-> Oh, I think I see what's going on. When you add 'kvm=off'
->
-> cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
->
-> kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
->
-> migration.
->
->
->
-> In case we really want to support 'kvm=off' I think we can add Hyper-V
->
-> features check here along with KVM, this should do the job.
->
->
-Does the untested
->
->
-diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
->
-index 64283358f91d..e03b2ca6d8f6 100644
->
---- a/hw/i386/kvm/clock.c
->
-+++ b/hw/i386/kvm/clock.c
->
-@@ -333,8 +333,9 @@ void kvmclock_create(void)
->
-X86CPU *cpu = X86_CPU(first_cpu);
->
->
-if (kvm_enabled() &&
->
--        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
->
--                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
->
-+        ((cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
->
-+                                         (1ULL <<
->
-KVM_FEATURE_CLOCKSOURCE2))) ||
->
-+         (cpu->env.features[FEAT_HYPERV_EAX] &
->
-HV_TIME_REF_COUNT_AVAILABLE))) {
->
-sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
->
-}
->
-}
->
->
-help?
-It appears to work :)
-
->
->
-(I don't think we need to remove all 'if (kvm_enabled())' checks from
->
-machine types as 'kvm=off' should not be related).
-Indeed (I didn't look at the macro, it was just quick & dirty).
-
->
->
---
->
-Vitaly
->
->
--- 
-Antoine 'xdbob' Damhet
-signature.asc
-Description:
-PGP signature
-
-On 16/09/20 13:29, Dr. David Alan Gilbert wrote:
->
-> I have tracked the bug to the fact that `kvmclock` is not exposed and
->
-> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->
->
-> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
-> present and add Hyper-V support for the `kvmclock_current_nsec`
->
-> function.
-Yes, this seems correct.  I would have to check but it may even be
-better to _always_ send kvmclock data in the live migration stream.
-
-Paolo
-
-Paolo Bonzini <pbonzini@redhat.com> writes:
-
->
-On 16/09/20 13:29, Dr. David Alan Gilbert wrote:
->
->> I have tracked the bug to the fact that `kvmclock` is not exposed and
->
->> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
->
->>
->
->> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
->
->> present and add Hyper-V support for the `kvmclock_current_nsec`
->
->> function.
->
->
-Yes, this seems correct.  I would have to check but it may even be
->
-better to _always_ send kvmclock data in the live migration stream.
->
-The question I have is: with 'kvm=off', do we actually restore TSC
-reading on migration? (and I guess the answer is 'no' or Hyper-V TSC
-page would 'just work' I guess). So yea, maybe dropping the
-'cpu->env.features[FEAT_KVM]' check is the right fix.
-
--- 
-Vitaly
-
diff --git a/results/classifier/005/other/65781993 b/results/classifier/005/other/65781993
deleted file mode 100644
index a7d133b6..00000000
--- a/results/classifier/005/other/65781993
+++ /dev/null
@@ -1,2801 +0,0 @@
-other: 0.727
-instruction: 0.670
-assembly: 0.666
-semantic: 0.665
-graphic: 0.664
-socket: 0.660
-network: 0.657
-mistranslation: 0.650
-device: 0.647
-boot: 0.635
-KVM: 0.627
-vnc: 0.590
-
-[Qemu-devel] 答复: Re:   答复: Re:  [BUG]COLO failover hang
-
-Thank you。
-
-I have test aready。
-
-When the Primary Node panic,the Secondary Node qemu hang at the same place。
-
-Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node qemu 
-will not produce the problem,but Primary Node panic can。
-
-I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-
-
-when failover,channel_shutdown could not shut down the channel.
-
-
-so the colo_process_incoming_thread will hang at recvmsg.
-
-
-I test a patch:
-
-
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-     }
-
-
- 
-
-
-     trace_migration_socket_incoming_accepted()
-
-
-    
-
-
-     qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-     migration_channel_process_incoming(migrate_get_current(),
-
-
-                                        QIO_CHANNEL(sioc))
-
-
-     object_unref(OBJECT(sioc))
-
-
-
-
-My test will not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月21日 15:58
-主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-
-
-
-
-
-Hi,Wang.
-
-You can test this branch:
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-and please follow wiki ensure your own configuration correctly.
-http://wiki.qemu-project.org/Features/COLO
-Thanks
-
-Zhang Chen
-
-
-On 03/21/2017 03:27 PM, address@hidden wrote:
-＞
-＞ hi.
-＞
-＞ I test the git qemu master have the same problem.
-＞
-＞ (gdb) bt
-＞
-＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880, 
-＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞
-＞ #1  0x00007f658e4aa0c2 in qio_channel_read 
-＞ (address@hidden, address@hidden "", 
-＞ address@hidden, address@hidden) at io/channel.c:114
-＞
-＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞, 
-＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at 
-＞ migration/qemu-file-channel.c:78
-＞
-＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at 
-＞ migration/qemu-file.c:295
-＞
-＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden, 
-＞ address@hidden) at migration/qemu-file.c:555
-＞
-＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at 
-＞ migration/qemu-file.c:568
-＞
-＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at 
-＞ migration/qemu-file.c:648
-＞
-＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800, 
-＞ address@hidden) at migration/colo.c:244
-＞
-＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized 
-＞ out＞, address@hidden, 
-＞ address@hidden)
-＞
-＞     at migration/colo.c:264
-＞
-＞ #9  0x00007f658e3e740e in colo_process_incoming_thread 
-＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞
-＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞
-＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞
-＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞
-＞ $3 = 0
-＞
-＞
-＞ (gdb) bt
-＞
-＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90, 
-＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞
-＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at 
-＞ gmain.c:3054
-＞
-＞ #2  g_main_context_dispatch (context=＜optimized out＞, 
-＞ address@hidden) at gmain.c:3630
-＞
-＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞
-＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at 
-＞ util/main-loop.c:258
-＞
-＞ #5  main_loop_wait (address@hidden) at 
-＞ util/main-loop.c:506
-＞
-＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞
-＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized 
-＞ out＞) at vl.c:4709
-＞
-＞ (gdb) p ioc-＞features
-＞
-＞ $1 = 6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞
-＞
-＞ May be socket_accept_incoming_migration should 
-＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞
-＞
-＞ thank you.
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞ address@hidden
-＞ address@hidden
-＞ address@hidden@huawei.com＞
-＞ *日 期 ：*2017年03月16日 14:46
-＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞
-＞
-＞
-＞
-＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞
-＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞
-＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞ Do the colo have any plan for development?
-＞
-＞ Yes, We are developing. You can see some of patch we pushing.
-＞
-＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞
-＞ In our internal version can run it successfully,
-＞ The failover detail you can ask Zhanghailiang for help.
-＞ Next time if you have some question about COLO,
-＞ please cc me and zhanghailiang address@hidden
-＞
-＞
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ centos7.2+qemu2.7.50
-＞ ＞ (gdb) bt
-＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ ＞ io/channel-socket.c:497
-＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞ address@hidden "", address@hidden,
-＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞ migration/qemu-file.c:257
-＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞ migration/qemu-file.c:523
-＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞ migration/qemu-file.c:603
-＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞ migration/colo.c:546
-＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞ migration/colo.c:649
-＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ --
-＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞
-＞ -- 
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞
-＞
-＞
-
--- 
-Thanks
-Zhang Chen
-
-Hi,
-
-On 2017/3/21 16:10, address@hidden wrote:
-Thank you。
-
-I have test aready。
-
-When the Primary Node panic,the Secondary Node qemu hang at the same place。
-
-Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node qemu 
-will not produce the problem,but Primary Node panic can。
-
-I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-Yes, you are right, when we do failover for primary/secondary VM, we will 
-shutdown the related
-fd in case it is stuck in the read/write fd.
-
-It seems that you didn't follow the above introduction exactly to do the test. 
-Could you
-share your test procedures ? Especially the commands used in the test.
-
-Thanks,
-Hailiang
-when failover,channel_shutdown could not shut down the channel.
-
-
-so the colo_process_incoming_thread will hang at recvmsg.
-
-
-I test a patch:
-
-
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-      }
-
-
-
-
-
-      trace_migration_socket_incoming_accepted()
-
-
-
-
-
-      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-      migration_channel_process_incoming(migrate_get_current(),
-
-
-                                         QIO_CHANNEL(sioc))
-
-
-      object_unref(OBJECT(sioc))
-
-
-
-
-My test will not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月21日 15:58
-主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-
-
-
-
-
-Hi,Wang.
-
-You can test this branch:
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-and please follow wiki ensure your own configuration correctly.
-http://wiki.qemu-project.org/Features/COLO
-Thanks
-
-Zhang Chen
-
-
-On 03/21/2017 03:27 PM, address@hidden wrote:
-＞
-＞ hi.
-＞
-＞ I test the git qemu master have the same problem.
-＞
-＞ (gdb) bt
-＞
-＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞
-＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ (address@hidden, address@hidden "",
-＞ address@hidden, address@hidden) at io/channel.c:114
-＞
-＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ migration/qemu-file-channel.c:78
-＞
-＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ migration/qemu-file.c:295
-＞
-＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ address@hidden) at migration/qemu-file.c:555
-＞
-＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ migration/qemu-file.c:568
-＞
-＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ migration/qemu-file.c:648
-＞
-＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ address@hidden) at migration/colo.c:244
-＞
-＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ out＞, address@hidden,
-＞ address@hidden)
-＞
-＞     at migration/colo.c:264
-＞
-＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞
-＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞
-＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞
-＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞
-＞ $3 = 0
-＞
-＞
-＞ (gdb) bt
-＞
-＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞
-＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ gmain.c:3054
-＞
-＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ address@hidden) at gmain.c:3630
-＞
-＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞
-＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ util/main-loop.c:258
-＞
-＞ #5  main_loop_wait (address@hidden) at
-＞ util/main-loop.c:506
-＞
-＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞
-＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ out＞) at vl.c:4709
-＞
-＞ (gdb) p ioc-＞features
-＞
-＞ $1 = 6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞
-＞
-＞ May be socket_accept_incoming_migration should
-＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞
-＞
-＞ thank you.
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞ address@hidden
-＞ address@hidden
-＞ address@hidden@huawei.com＞
-＞ *日 期 ：*2017年03月16日 14:46
-＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞
-＞
-＞
-＞
-＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞
-＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞
-＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞ Do the colo have any plan for development?
-＞
-＞ Yes, We are developing. You can see some of patch we pushing.
-＞
-＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞
-＞ In our internal version can run it successfully,
-＞ The failover detail you can ask Zhanghailiang for help.
-＞ Next time if you have some question about COLO,
-＞ please cc me and zhanghailiang address@hidden
-＞
-＞
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ centos7.2+qemu2.7.50
-＞ ＞ (gdb) bt
-＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ ＞ io/channel-socket.c:497
-＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞ address@hidden "", address@hidden,
-＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞ migration/qemu-file.c:257
-＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞ migration/qemu-file.c:523
-＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞ migration/qemu-file.c:603
-＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞ migration/colo.c:546
-＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞ migration/colo.c:649
-＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ --
-＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞
-＞ --
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞
-＞
-＞
-
-Hi,
-
-Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-
-Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-case COLO thread/incoming thread is stuck in read/write() while do failover,
-but it didn't take effect, because all the fd used by COLO (also migration)
-has been wrapped by qio channel, and it will not call the shutdown API if
-we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-
-Cc: Dr. David Alan Gilbert <address@hidden>
-
-I doubted migration cancel has the same problem, it may be stuck in write()
-if we tried to cancel migration.
-
-void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error 
-**errp)
-{
-    qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
-    migration_channel_connect(s, ioc, NULL);
-    ... ...
-We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-and the
-migrate_fd_cancel()
-{
- ... ...
-    if (s->state == MIGRATION_STATUS_CANCELLING && f) {
-        qemu_file_shutdown(f);  --> This will not take effect. No ?
-    }
-}
-
-Thanks,
-Hailiang
-
-On 2017/3/21 16:10, address@hidden wrote:
-Thank you。
-
-I have test aready。
-
-When the Primary Node panic,the Secondary Node qemu hang at the same place。
-
-Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node qemu 
-will not produce the problem,but Primary Node panic can。
-
-I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-
-
-when failover,channel_shutdown could not shut down the channel.
-
-
-so the colo_process_incoming_thread will hang at recvmsg.
-
-
-I test a patch:
-
-
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-      }
-
-
-
-
-
-      trace_migration_socket_incoming_accepted()
-
-
-
-
-
-      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-      migration_channel_process_incoming(migrate_get_current(),
-
-
-                                         QIO_CHANNEL(sioc))
-
-
-      object_unref(OBJECT(sioc))
-
-
-
-
-My test will not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月21日 15:58
-主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-
-
-
-
-
-Hi,Wang.
-
-You can test this branch:
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-and please follow wiki ensure your own configuration correctly.
-http://wiki.qemu-project.org/Features/COLO
-Thanks
-
-Zhang Chen
-
-
-On 03/21/2017 03:27 PM, address@hidden wrote:
-＞
-＞ hi.
-＞
-＞ I test the git qemu master have the same problem.
-＞
-＞ (gdb) bt
-＞
-＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞
-＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ (address@hidden, address@hidden "",
-＞ address@hidden, address@hidden) at io/channel.c:114
-＞
-＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ migration/qemu-file-channel.c:78
-＞
-＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ migration/qemu-file.c:295
-＞
-＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ address@hidden) at migration/qemu-file.c:555
-＞
-＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ migration/qemu-file.c:568
-＞
-＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ migration/qemu-file.c:648
-＞
-＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ address@hidden) at migration/colo.c:244
-＞
-＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ out＞, address@hidden,
-＞ address@hidden)
-＞
-＞     at migration/colo.c:264
-＞
-＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞
-＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞
-＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞
-＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞
-＞ $3 = 0
-＞
-＞
-＞ (gdb) bt
-＞
-＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞
-＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ gmain.c:3054
-＞
-＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ address@hidden) at gmain.c:3630
-＞
-＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞
-＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ util/main-loop.c:258
-＞
-＞ #5  main_loop_wait (address@hidden) at
-＞ util/main-loop.c:506
-＞
-＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞
-＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ out＞) at vl.c:4709
-＞
-＞ (gdb) p ioc-＞features
-＞
-＞ $1 = 6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞
-＞
-＞ May be socket_accept_incoming_migration should
-＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞
-＞
-＞ thank you.
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞ address@hidden
-＞ address@hidden
-＞ address@hidden@huawei.com＞
-＞ *日 期 ：*2017年03月16日 14:46
-＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞
-＞
-＞
-＞
-＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞
-＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞
-＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞ Do the colo have any plan for development?
-＞
-＞ Yes, We are developing. You can see some of patch we pushing.
-＞
-＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞
-＞ In our internal version can run it successfully,
-＞ The failover detail you can ask Zhanghailiang for help.
-＞ Next time if you have some question about COLO,
-＞ please cc me and zhanghailiang address@hidden
-＞
-＞
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ centos7.2+qemu2.7.50
-＞ ＞ (gdb) bt
-＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ ＞ io/channel-socket.c:497
-＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞ address@hidden "", address@hidden,
-＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞ migration/qemu-file.c:257
-＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞ migration/qemu-file.c:523
-＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞ migration/qemu-file.c:603
-＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞ migration/colo.c:546
-＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞ migration/colo.c:649
-＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ --
-＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞
-＞ --
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞
-＞
-＞
-
-* Hailiang Zhang (address@hidden) wrote:
->
-Hi,
->
->
-Thanks for reporting this, and i confirmed it in my test, and it is a bug.
->
->
-Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
->
-case COLO thread/incoming thread is stuck in read/write() while do failover,
->
-but it didn't take effect, because all the fd used by COLO (also migration)
->
-has been wrapped by qio channel, and it will not call the shutdown API if
->
-we didn't qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-QIO_CHANNEL_FEATURE_SHUTDOWN).
->
->
-Cc: Dr. David Alan Gilbert <address@hidden>
->
->
-I doubted migration cancel has the same problem, it may be stuck in write()
->
-if we tried to cancel migration.
->
->
-void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error
->
-**errp)
->
-{
->
-qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
->
-migration_channel_connect(s, ioc, NULL);
->
-... ...
->
-We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
->
-and the
->
-migrate_fd_cancel()
->
-{
->
-... ...
->
-if (s->state == MIGRATION_STATUS_CANCELLING && f) {
->
-qemu_file_shutdown(f);  --> This will not take effect. No ?
->
-}
->
-}
-(cc'd in Daniel Berrange).
-I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN); 
-at the
-top of qio_channel_socket_new;  so I think that's safe isn't it?
-
-Dave
-
->
-Thanks,
->
-Hailiang
->
->
-On 2017/3/21 16:10, address@hidden wrote:
->
-> Thank you。
->
->
->
-> I have test aready。
->
->
->
-> When the Primary Node panic,the Secondary Node qemu hang at the same place。
->
->
->
-> Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node
->
-> qemu will not produce the problem,but Primary Node panic can。
->
->
->
-> I think due to the feature of channel does not support
->
-> QIO_CHANNEL_FEATURE_SHUTDOWN.
->
->
->
->
->
-> when failover,channel_shutdown could not shut down the channel.
->
->
->
->
->
-> so the colo_process_incoming_thread will hang at recvmsg.
->
->
->
->
->
-> I test a patch:
->
->
->
->
->
-> diff --git a/migration/socket.c b/migration/socket.c
->
->
->
->
->
-> index 13966f1..d65a0ea 100644
->
->
->
->
->
-> --- a/migration/socket.c
->
->
->
->
->
-> +++ b/migration/socket.c
->
->
->
->
->
-> @@ -147,8 +147,9 @@ static gboolean
->
-> socket_accept_incoming_migration(QIOChannel *ioc,
->
->
->
->
->
->       }
->
->
->
->
->
->
->
->
->
->
->
->       trace_migration_socket_incoming_accepted()
->
->
->
->
->
->
->
->
->
->
->
->       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
->
->
->
->
->
-> +    qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-> QIO_CHANNEL_FEATURE_SHUTDOWN)
->
->
->
->
->
->       migration_channel_process_incoming(migrate_get_current(),
->
->
->
->
->
->                                          QIO_CHANNEL(sioc))
->
->
->
->
->
->       object_unref(OBJECT(sioc))
->
->
->
->
->
->
->
->
->
-> My test will not hang any more.
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
-> 原始邮件
->
->
->
->
->
->
->
-> 发件人： address@hidden
->
-> 收件人：王广10165992 address@hidden
->
-> 抄送人： address@hidden address@hidden
->
-> 日 期 ：2017年03月21日 15:58
->
-> 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
->
->
->
->
->
->
->
->
->
->
->
-> Hi,Wang.
->
->
->
-> You can test this branch:
->
->
->
->
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
->
->
->
-> and please follow wiki ensure your own configuration correctly.
->
->
->
->
-http://wiki.qemu-project.org/Features/COLO
->
->
->
->
->
-> Thanks
->
->
->
-> Zhang Chen
->
->
->
->
->
-> On 03/21/2017 03:27 PM, address@hidden wrote:
->
-> ＞
->
-> ＞ hi.
->
-> ＞
->
-> ＞ I test the git qemu master have the same problem.
->
-> ＞
->
-> ＞ (gdb) bt
->
-> ＞
->
-> ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
->
-> ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
->
-> ＞
->
-> ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
->
-> ＞ (address@hidden, address@hidden "",
->
-> ＞ address@hidden, address@hidden) at io/channel.c:114
->
-> ＞
->
-> ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
->
-> ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
->
-> ＞ migration/qemu-file-channel.c:78
->
-> ＞
->
-> ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
->
-> ＞ migration/qemu-file.c:295
->
-> ＞
->
-> ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
->
-> ＞ address@hidden) at migration/qemu-file.c:555
->
-> ＞
->
-> ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
->
-> ＞ migration/qemu-file.c:568
->
-> ＞
->
-> ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
->
-> ＞ migration/qemu-file.c:648
->
-> ＞
->
-> ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
->
-> ＞ address@hidden) at migration/colo.c:244
->
-> ＞
->
-> ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
->
-> ＞ out＞, address@hidden,
->
-> ＞ address@hidden)
->
-> ＞
->
-> ＞     at migration/colo.c:264
->
-> ＞
->
-> ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
->
-> ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
->
-> ＞
->
-> ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
->
-> ＞
->
-> ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
->
-> ＞
->
-> ＞ (gdb) p ioc-＞name
->
-> ＞
->
-> ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
->
-> ＞
->
-> ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
->
-> ＞
->
-> ＞ $3 = 0
->
-> ＞
->
-> ＞
->
-> ＞ (gdb) bt
->
-> ＞
->
-> ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
->
-> ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
->
-> ＞
->
-> ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
->
-> ＞ gmain.c:3054
->
-> ＞
->
-> ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
->
-> ＞ address@hidden) at gmain.c:3630
->
-> ＞
->
-> ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
->
-> ＞
->
-> ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
->
-> ＞ util/main-loop.c:258
->
-> ＞
->
-> ＞ #5  main_loop_wait (address@hidden) at
->
-> ＞ util/main-loop.c:506
->
-> ＞
->
-> ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
->
-> ＞
->
-> ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
->
-> ＞ out＞) at vl.c:4709
->
-> ＞
->
-> ＞ (gdb) p ioc-＞features
->
-> ＞
->
-> ＞ $1 = 6
->
-> ＞
->
-> ＞ (gdb) p ioc-＞name
->
-> ＞
->
-> ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
->
-> ＞
->
-> ＞
->
-> ＞ May be socket_accept_incoming_migration should
->
-> ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
->
-> ＞
->
-> ＞
->
-> ＞ thank you.
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞ 原始邮件
->
-> ＞ address@hidden
->
-> ＞ address@hidden
->
-> ＞ address@hidden@huawei.com＞
->
-> ＞ *日 期 ：*2017年03月16日 14:46
->
-> ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞ On 03/15/2017 05:06 PM, wangguang wrote:
->
-> ＞ ＞   am testing QEMU COLO feature described here [QEMU
->
-> ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
->
-> ＞ ＞
->
-> ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
->
-> ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
->
-> ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
->
-> ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
->
-> ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
->
-> ＞ ＞
->
-> ＞ ＞ I found that the colo in qemu is not complete yet.
->
-> ＞ ＞ Do the colo have any plan for development?
->
-> ＞
->
-> ＞ Yes, We are developing. You can see some of patch we pushing.
->
-> ＞
->
-> ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
->
-> ＞
->
-> ＞ In our internal version can run it successfully,
->
-> ＞ The failover detail you can ask Zhanghailiang for help.
->
-> ＞ Next time if you have some question about COLO,
->
-> ＞ please cc me and zhanghailiang address@hidden
->
-> ＞
->
-> ＞
->
-> ＞ Thanks
->
-> ＞ Zhang Chen
->
-> ＞
->
-> ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞ centos7.2+qemu2.7.50
->
-> ＞ ＞ (gdb) bt
->
-> ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
->
-> ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
->
-> ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0)
->
-> at
->
-> ＞ ＞ io/channel-socket.c:497
->
-> ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
->
-> ＞ ＞ address@hidden "", address@hidden,
->
-> ＞ ＞ address@hidden) at io/channel.c:97
->
-> ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
->
-> ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
->
-> ＞ ＞ migration/qemu-file-channel.c:78
->
-> ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
->
-> ＞ ＞ migration/qemu-file.c:257
->
-> ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
->
-> ＞ ＞ address@hidden) at migration/qemu-file.c:510
->
-> ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
->
-> ＞ ＞ migration/qemu-file.c:523
->
-> ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
->
-> ＞ ＞ migration/qemu-file.c:603
->
-> ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
->
-> ＞ ＞ address@hidden) at migration/colo.c:215
->
-> ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
->
-> ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
->
-> ＞ ＞ migration/colo.c:546
->
-> ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
->
-> ＞ ＞ migration/colo.c:649
->
-> ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
->
-> ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞ --
->
-> ＞ ＞ View this message in context:
->
->
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
->
-> ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞ ＞
->
-> ＞
->
-> ＞ --
->
-> ＞ Thanks
->
-> ＞ Zhang Chen
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞
->
-> ＞
->
->
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
-* Hailiang Zhang (address@hidden) wrote:
-Hi,
-
-Thanks for reporting this, and i confirmed it in my test, and it is a bug.
-
-Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
-case COLO thread/incoming thread is stuck in read/write() while do failover,
-but it didn't take effect, because all the fd used by COLO (also migration)
-has been wrapped by qio channel, and it will not call the shutdown API if
-we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN).
-
-Cc: Dr. David Alan Gilbert <address@hidden>
-
-I doubted migration cancel has the same problem, it may be stuck in write()
-if we tried to cancel migration.
-
-void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error 
-**errp)
-{
-     qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
-     migration_channel_connect(s, ioc, NULL);
-     ... ...
-We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
-QIO_CHANNEL_FEATURE_SHUTDOWN) above,
-and the
-migrate_fd_cancel()
-{
-  ... ...
-     if (s->state == MIGRATION_STATUS_CANCELLING && f) {
-         qemu_file_shutdown(f);  --> This will not take effect. No ?
-     }
-}
-(cc'd in Daniel Berrange).
-I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN); 
-at the
-top of qio_channel_socket_new;  so I think that's safe isn't it?
-Hmm, you are right, this problem is only exist for the migration incoming fd, 
-thanks.
-Dave
-Thanks,
-Hailiang
-
-On 2017/3/21 16:10, address@hidden wrote:
-Thank you。
-
-I have test aready。
-
-When the Primary Node panic,the Secondary Node qemu hang at the same place。
-
-Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary Node qemu 
-will not produce the problem,but Primary Node panic can。
-
-I think due to the feature of channel does not support 
-QIO_CHANNEL_FEATURE_SHUTDOWN.
-
-
-when failover,channel_shutdown could not shut down the channel.
-
-
-so the colo_process_incoming_thread will hang at recvmsg.
-
-
-I test a patch:
-
-
-diff --git a/migration/socket.c b/migration/socket.c
-
-
-index 13966f1..d65a0ea 100644
-
-
---- a/migration/socket.c
-
-
-+++ b/migration/socket.c
-
-
-@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
-*ioc,
-
-
-       }
-
-
-
-
-
-       trace_migration_socket_incoming_accepted()
-
-
-
-
-
-       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
-
-
-+    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
-
-
-       migration_channel_process_incoming(migrate_get_current(),
-
-
-                                          QIO_CHANNEL(sioc))
-
-
-       object_unref(OBJECT(sioc))
-
-
-
-
-My test will not hang any more.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-原始邮件
-
-
-
-发件人： address@hidden
-收件人：王广10165992 address@hidden
-抄送人： address@hidden address@hidden
-日 期 ：2017年03月21日 15:58
-主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
-
-
-
-
-
-Hi,Wang.
-
-You can test this branch:
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
-and please follow wiki ensure your own configuration correctly.
-http://wiki.qemu-project.org/Features/COLO
-Thanks
-
-Zhang Chen
-
-
-On 03/21/2017 03:27 PM, address@hidden wrote:
-＞
-＞ hi.
-＞
-＞ I test the git qemu master have the same problem.
-＞
-＞ (gdb) bt
-＞
-＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
-＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
-＞
-＞ #1  0x00007f658e4aa0c2 in qio_channel_read
-＞ (address@hidden, address@hidden "",
-＞ address@hidden, address@hidden) at io/channel.c:114
-＞
-＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
-＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
-＞ migration/qemu-file-channel.c:78
-＞
-＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
-＞ migration/qemu-file.c:295
-＞
-＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
-＞ address@hidden) at migration/qemu-file.c:555
-＞
-＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
-＞ migration/qemu-file.c:568
-＞
-＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
-＞ migration/qemu-file.c:648
-＞
-＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
-＞ address@hidden) at migration/colo.c:244
-＞
-＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
-＞ out＞, address@hidden,
-＞ address@hidden)
-＞
-＞     at migration/colo.c:264
-＞
-＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
-＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
-＞
-＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
-＞
-＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
-＞
-＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
-＞
-＞ $3 = 0
-＞
-＞
-＞ (gdb) bt
-＞
-＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
-＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
-＞
-＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
-＞ gmain.c:3054
-＞
-＞ #2  g_main_context_dispatch (context=＜optimized out＞,
-＞ address@hidden) at gmain.c:3630
-＞
-＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
-＞
-＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
-＞ util/main-loop.c:258
-＞
-＞ #5  main_loop_wait (address@hidden) at
-＞ util/main-loop.c:506
-＞
-＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
-＞
-＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
-＞ out＞) at vl.c:4709
-＞
-＞ (gdb) p ioc-＞features
-＞
-＞ $1 = 6
-＞
-＞ (gdb) p ioc-＞name
-＞
-＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
-＞
-＞
-＞ May be socket_accept_incoming_migration should
-＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
-＞
-＞
-＞ thank you.
-＞
-＞
-＞
-＞
-＞
-＞ 原始邮件
-＞ address@hidden
-＞ address@hidden
-＞ address@hidden@huawei.com＞
-＞ *日 期 ：*2017年03月16日 14:46
-＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
-＞
-＞
-＞
-＞
-＞ On 03/15/2017 05:06 PM, wangguang wrote:
-＞ ＞   am testing QEMU COLO feature described here [QEMU
-＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
-＞ ＞
-＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
-＞ ＞ hang at recvmsg in qio_channel_socket_readv.
-＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
-＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
-＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
-＞ ＞
-＞ ＞ I found that the colo in qemu is not complete yet.
-＞ ＞ Do the colo have any plan for development?
-＞
-＞ Yes, We are developing. You can see some of patch we pushing.
-＞
-＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
-＞
-＞ In our internal version can run it successfully,
-＞ The failover detail you can ask Zhanghailiang for help.
-＞ Next time if you have some question about COLO,
-＞ please cc me and zhanghailiang address@hidden
-＞
-＞
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ centos7.2+qemu2.7.50
-＞ ＞ (gdb) bt
-＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
-＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
-＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
-＞ ＞ io/channel-socket.c:497
-＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
-＞ ＞ address@hidden "", address@hidden,
-＞ ＞ address@hidden) at io/channel.c:97
-＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
-＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
-＞ ＞ migration/qemu-file-channel.c:78
-＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
-＞ ＞ migration/qemu-file.c:257
-＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
-＞ ＞ address@hidden) at migration/qemu-file.c:510
-＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
-＞ ＞ migration/qemu-file.c:523
-＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
-＞ ＞ migration/qemu-file.c:603
-＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
-＞ ＞ address@hidden) at migration/colo.c:215
-＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
-＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
-＞ ＞ migration/colo.c:546
-＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
-＞ ＞ migration/colo.c:649
-＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
-＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞ --
-＞ ＞ View this message in context:
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
-＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
-＞ ＞
-＞ ＞
-＞ ＞
-＞ ＞
-＞
-＞ --
-＞ Thanks
-＞ Zhang Chen
-＞
-＞
-＞
-＞
-＞
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-.
-
-* Hailiang Zhang (address@hidden) wrote:
->
-On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
->
-> * Hailiang Zhang (address@hidden) wrote:
->
-> > Hi,
->
-> >
->
-> > Thanks for reporting this, and i confirmed it in my test, and it is a bug.
->
-> >
->
-> > Though we tried to call qemu_file_shutdown() to shutdown the related fd,
->
-> > in
->
-> > case COLO thread/incoming thread is stuck in read/write() while do
->
-> > failover,
->
-> > but it didn't take effect, because all the fd used by COLO (also
->
-> > migration)
->
-> > has been wrapped by qio channel, and it will not call the shutdown API if
->
-> > we didn't qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-> > QIO_CHANNEL_FEATURE_SHUTDOWN).
->
-> >
->
-> > Cc: Dr. David Alan Gilbert <address@hidden>
->
-> >
->
-> > I doubted migration cancel has the same problem, it may be stuck in
->
-> > write()
->
-> > if we tried to cancel migration.
->
-> >
->
-> > void fd_start_outgoing_migration(MigrationState *s, const char *fdname,
->
-> > Error **errp)
->
-> > {
->
-> >      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
->
-> >      migration_channel_connect(s, ioc, NULL);
->
-> >      ... ...
->
-> > We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-> > QIO_CHANNEL_FEATURE_SHUTDOWN) above,
->
-> > and the
->
-> > migrate_fd_cancel()
->
-> > {
->
-> >   ... ...
->
-> >      if (s->state == MIGRATION_STATUS_CANCELLING && f) {
->
-> >          qemu_file_shutdown(f);  --> This will not take effect. No ?
->
-> >      }
->
-> > }
->
->
->
-> (cc'd in Daniel Berrange).
->
-> I see that we call qio_channel_set_feature(ioc,
->
-> QIO_CHANNEL_FEATURE_SHUTDOWN); at the
->
-> top of qio_channel_socket_new;  so I think that's safe isn't it?
->
->
->
->
-Hmm, you are right, this problem is only exist for the migration incoming fd,
->
-thanks.
-Yes, and I don't think we normally do a cancel on the incoming side of a 
-migration.
-
-Dave
-
->
-> Dave
->
->
->
-> > Thanks,
->
-> > Hailiang
->
-> >
->
-> > On 2017/3/21 16:10, address@hidden wrote:
->
-> > > Thank you。
->
-> > >
->
-> > > I have test aready。
->
-> > >
->
-> > > When the Primary Node panic,the Secondary Node qemu hang at the same
->
-> > > place。
->
-> > >
->
-> > > Incorrding
-http://wiki.qemu-project.org/Features/COLO
-，kill Primary
->
-> > > Node qemu will not produce the problem,but Primary Node panic can。
->
-> > >
->
-> > > I think due to the feature of channel does not support
->
-> > > QIO_CHANNEL_FEATURE_SHUTDOWN.
->
-> > >
->
-> > >
->
-> > > when failover,channel_shutdown could not shut down the channel.
->
-> > >
->
-> > >
->
-> > > so the colo_process_incoming_thread will hang at recvmsg.
->
-> > >
->
-> > >
->
-> > > I test a patch:
->
-> > >
->
-> > >
->
-> > > diff --git a/migration/socket.c b/migration/socket.c
->
-> > >
->
-> > >
->
-> > > index 13966f1..d65a0ea 100644
->
-> > >
->
-> > >
->
-> > > --- a/migration/socket.c
->
-> > >
->
-> > >
->
-> > > +++ b/migration/socket.c
->
-> > >
->
-> > >
->
-> > > @@ -147,8 +147,9 @@ static gboolean
->
-> > > socket_accept_incoming_migration(QIOChannel *ioc,
->
-> > >
->
-> > >
->
-> > >        }
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >        trace_migration_socket_incoming_accepted()
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >        qio_channel_set_name(QIO_CHANNEL(sioc),
->
-> > > "migration-socket-incoming")
->
-> > >
->
-> > >
->
-> > > +    qio_channel_set_feature(QIO_CHANNEL(sioc),
->
-> > > QIO_CHANNEL_FEATURE_SHUTDOWN)
->
-> > >
->
-> > >
->
-> > >        migration_channel_process_incoming(migrate_get_current(),
->
-> > >
->
-> > >
->
-> > >                                           QIO_CHANNEL(sioc))
->
-> > >
->
-> > >
->
-> > >        object_unref(OBJECT(sioc))
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > > My test will not hang any more.
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > > 原始邮件
->
-> > >
->
-> > >
->
-> > >
->
-> > > 发件人： address@hidden
->
-> > > 收件人：王广10165992 address@hidden
->
-> > > 抄送人： address@hidden address@hidden
->
-> > > 日 期 ：2017年03月21日 15:58
->
-> > > 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > >
->
-> > > Hi,Wang.
->
-> > >
->
-> > > You can test this branch:
->
-> > >
->
-> > >
-https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
->
-> > >
->
-> > > and please follow wiki ensure your own configuration correctly.
->
-> > >
->
-> > >
-http://wiki.qemu-project.org/Features/COLO
->
-> > >
->
-> > >
->
-> > > Thanks
->
-> > >
->
-> > > Zhang Chen
->
-> > >
->
-> > >
->
-> > > On 03/21/2017 03:27 PM, address@hidden wrote:
->
-> > > ＞
->
-> > > ＞ hi.
->
-> > > ＞
->
-> > > ＞ I test the git qemu master have the same problem.
->
-> > > ＞
->
-> > > ＞ (gdb) bt
->
-> > > ＞
->
-> > > ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
->
-> > > ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
->
-> > > ＞
->
-> > > ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
->
-> > > ＞ (address@hidden, address@hidden "",
->
-> > > ＞ address@hidden, address@hidden) at io/channel.c:114
->
-> > > ＞
->
-> > > ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
->
-> > > ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
->
-> > > ＞ migration/qemu-file-channel.c:78
->
-> > > ＞
->
-> > > ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
->
-> > > ＞ migration/qemu-file.c:295
->
-> > > ＞
->
-> > > ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
->
-> > > ＞ address@hidden) at migration/qemu-file.c:555
->
-> > > ＞
->
-> > > ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
->
-> > > ＞ migration/qemu-file.c:568
->
-> > > ＞
->
-> > > ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
->
-> > > ＞ migration/qemu-file.c:648
->
-> > > ＞
->
-> > > ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
->
-> > > ＞ address@hidden) at migration/colo.c:244
->
-> > > ＞
->
-> > > ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
->
-> > > ＞ out＞, address@hidden,
->
-> > > ＞ address@hidden)
->
-> > > ＞
->
-> > > ＞     at migration/colo.c:264
->
-> > > ＞
->
-> > > ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
->
-> > > ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
->
-> > > ＞
->
-> > > ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
->
-> > > ＞
->
-> > > ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
->
-> > > ＞
->
-> > > ＞ (gdb) p ioc-＞name
->
-> > > ＞
->
-> > > ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
->
-> > > ＞
->
-> > > ＞ (gdb) p ioc-＞features        Do not support
->
-> > > QIO_CHANNEL_FEATURE_SHUTDOWN
->
-> > > ＞
->
-> > > ＞ $3 = 0
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ (gdb) bt
->
-> > > ＞
->
-> > > ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
->
-> > > ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
->
-> > > ＞
->
-> > > ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
->
-> > > ＞ gmain.c:3054
->
-> > > ＞
->
-> > > ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
->
-> > > ＞ address@hidden) at gmain.c:3630
->
-> > > ＞
->
-> > > ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
->
-> > > ＞
->
-> > > ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
->
-> > > ＞ util/main-loop.c:258
->
-> > > ＞
->
-> > > ＞ #5  main_loop_wait (address@hidden) at
->
-> > > ＞ util/main-loop.c:506
->
-> > > ＞
->
-> > > ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
->
-> > > ＞
->
-> > > ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
->
-> > > ＞ out＞) at vl.c:4709
->
-> > > ＞
->
-> > > ＞ (gdb) p ioc-＞features
->
-> > > ＞
->
-> > > ＞ $1 = 6
->
-> > > ＞
->
-> > > ＞ (gdb) p ioc-＞name
->
-> > > ＞
->
-> > > ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ May be socket_accept_incoming_migration should
->
-> > > ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ thank you.
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ 原始邮件
->
-> > > ＞ address@hidden
->
-> > > ＞ address@hidden
->
-> > > ＞ address@hidden@huawei.com＞
->
-> > > ＞ *日 期 ：*2017年03月16日 14:46
->
-> > > ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ On 03/15/2017 05:06 PM, wangguang wrote:
->
-> > > ＞ ＞   am testing QEMU COLO feature described here [QEMU
->
-> > > ＞ ＞ Wiki](
-http://wiki.qemu-project.org/Features/COLO
-).
->
-> > > ＞ ＞
->
-> > > ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
->
-> > > ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
->
-> > > ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
->
-> > > ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
->
-> > > ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
->
-> > > ＞ ＞
->
-> > > ＞ ＞ I found that the colo in qemu is not complete yet.
->
-> > > ＞ ＞ Do the colo have any plan for development?
->
-> > > ＞
->
-> > > ＞ Yes, We are developing. You can see some of patch we pushing.
->
-> > > ＞
->
-> > > ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
->
-> > > ＞
->
-> > > ＞ In our internal version can run it successfully,
->
-> > > ＞ The failover detail you can ask Zhanghailiang for help.
->
-> > > ＞ Next time if you have some question about COLO,
->
-> > > ＞ please cc me and zhanghailiang address@hidden
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ Thanks
->
-> > > ＞ Zhang Chen
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞ centos7.2+qemu2.7.50
->
-> > > ＞ ＞ (gdb) bt
->
-> > > ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
->
-> > > ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized
->
-> > > out＞,
->
-> > > ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0,
->
-> > > errp=0x0) at
->
-> > > ＞ ＞ io/channel-socket.c:497
->
-> > > ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
->
-> > > ＞ ＞ address@hidden "", address@hidden,
->
-> > > ＞ ＞ address@hidden) at io/channel.c:97
->
-> > > ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized
->
-> > > out＞,
->
-> > > ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
->
-> > > ＞ ＞ migration/qemu-file-channel.c:78
->
-> > > ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
->
-> > > ＞ ＞ migration/qemu-file.c:257
->
-> > > ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
->
-> > > ＞ ＞ address@hidden) at migration/qemu-file.c:510
->
-> > > ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
->
-> > > ＞ ＞ migration/qemu-file.c:523
->
-> > > ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
->
-> > > ＞ ＞ migration/qemu-file.c:603
->
-> > > ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
->
-> > > ＞ ＞ address@hidden) at migration/colo.c:215
->
-> > > ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message
->
-> > > (errp=0x7f3d62bfaa48,
->
-> > > ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
->
-> > > ＞ ＞ migration/colo.c:546
->
-> > > ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
->
-> > > ＞ ＞ migration/colo.c:649
->
-> > > ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from
->
-> > > /lib64/libpthread.so.0
->
-> > > ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞ --
->
-> > > ＞ ＞ View this message in context:
->
-> > >
-http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
->
-> > > ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞ ＞
->
-> > > ＞
->
-> > > ＞ --
->
-> > > ＞ Thanks
->
-> > > ＞ Zhang Chen
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > > ＞
->
-> > >
->
-> >
->
-> --
->
-> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
->
-> .
->
->
->
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
diff --git a/results/classifier/005/other/66743673 b/results/classifier/005/other/66743673
deleted file mode 100644
index 5562ad60..00000000
--- a/results/classifier/005/other/66743673
+++ /dev/null
@@ -1,372 +0,0 @@
-other: 0.967
-assembly: 0.954
-semantic: 0.951
-boot: 0.938
-instruction: 0.930
-network: 0.930
-graphic: 0.927
-socket: 0.926
-vnc: 0.926
-device: 0.926
-KVM: 0.891
-mistranslation: 0.855
-
-[Bug] QEMU TCG warnings after commit c6bd2dd63420 - HTT / CMP_LEG bits
-
-Hi Community,
-
-This email contains 3 bugs appear to share the same root cause.
-
-[1] We ran into the following warnings when running QEMU v10.0.0 in TCG mode:
-
-qemu-system-x86_64 \
-  -machine q35 \
-  -m 4G -smp 4 \
-  -kernel ./arch/x86/boot/bzImage \
-  -bios /usr/share/ovmf/OVMF.fd \
-  -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
-  -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
-  -nographic \
-  -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.01H:EDX.ht [bit 28]
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.80000001H:ECX.cmp-legacy [bit 1]
-(repeats 4 times, once per vCPU)
-Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up CPUID_HT in
-x86_cpu_expand_features() instead of cpu_x86_cpuid()" is what introduced the
-warnings.
-Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28]) and
-CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT support, these
-bits trigger the warnings above.
-[2] Also, Zhao pointed me to a similar report on GitLab:
-https://gitlab.com/qemu-project/qemu/-/issues/2894
-The symptoms there look identical to what we're seeing.
-By convention we file one issue per email, but these two appear to share the
-same root cause, so I'm describing them together here.
-[3] My colleague Alan noticed what appears to be a related problem: if we launch
-a guest with '-cpu <model>,-ht --enable-kvm', which means explicitly removing
-the ht flag, but the guest still reports HT(cat /proc/cpuinfo in linux guest)
-enabled. In other words, under KVM the ht bit seems to be forced on even when
-the user tries to disable it.
-Best regards,
-Ewan
-
-On 4/29/25 11:02 AM, Ewan Hai wrote:
-Hi Community,
-
-This email contains 3 bugs appear to share the same root cause.
-
-[1] We ran into the following warnings when running QEMU v10.0.0 in TCG mode:
-
-qemu-system-x86_64 \
-   -machine q35 \
-   -m 4G -smp 4 \
-   -kernel ./arch/x86/boot/bzImage \
-   -bios /usr/share/ovmf/OVMF.fd \
-   -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
-   -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
-   -nographic \
-   -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.01H:EDX.ht [bit 28]
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.80000001H:ECX.cmp-legacy [bit 1]
-(repeats 4 times, once per vCPU)
-Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up CPUID_HT in
-x86_cpu_expand_features() instead of cpu_x86_cpuid()" is what introduced the
-warnings.
-Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28]) and
-CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT support, these
-bits trigger the warnings above.
-[2] Also, Zhao pointed me to a similar report on GitLab:
-https://gitlab.com/qemu-project/qemu/-/issues/2894
-The symptoms there look identical to what we're seeing.
-By convention we file one issue per email, but these two appear to share the
-same root cause, so I'm describing them together here.
-[3] My colleague Alan noticed what appears to be a related problem: if we launch
-a guest with '-cpu <model>,-ht --enable-kvm', which means explicitly removing
-the ht flag, but the guest still reports HT(cat /proc/cpuinfo in linux guest)
-enabled. In other words, under KVM the ht bit seems to be forced on even when
-the user tries to disable it.
-XiaoYao reminded me that issue [3] stems from a different patch. Please ignore
-it for now—I'll start a separate thread to discuss that one independently.
-Best regards,
-Ewan
-
-On 4/29/2025 11:02 AM, Ewan Hai wrote:
-Hi Community,
-
-This email contains 3 bugs appear to share the same root cause.
-[1] We ran into the following warnings when running QEMU v10.0.0 in TCG
-mode:
-qemu-system-x86_64 \
-   -machine q35 \
-   -m 4G -smp 4 \
-   -kernel ./arch/x86/boot/bzImage \
-   -bios /usr/share/ovmf/OVMF.fd \
-   -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
-   -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
-   -nographic \
-   -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.01H:EDX.ht [bit 28]
-qemu-system-x86_64: warning: TCG doesn't support requested feature:
-CPUID.80000001H:ECX.cmp-legacy [bit 1]
-(repeats 4 times, once per vCPU)
-Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up
-CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()" is
-what introduced the warnings.
-Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28])
-and CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT
-support, these bits trigger the warnings above.
-[2] Also, Zhao pointed me to a similar report on GitLab:
-https://gitlab.com/qemu-project/qemu/-/issues/2894
-The symptoms there look identical to what we're seeing.
-By convention we file one issue per email, but these two appear to share
-the same root cause, so I'm describing them together here.
-It was caused by my two patches. I think the fix can be as follow.
-If no objection from the community, I can submit the formal patch.
-
-diff --git a/target/i386/cpu.c b/target/i386/cpu.c
-index 1f970aa4daa6..fb95aadd6161 100644
---- a/target/i386/cpu.c
-+++ b/target/i386/cpu.c
-@@ -776,11 +776,12 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
-vendor1,
-CPUID_PAE | CPUID_MCE | CPUID_CX8 | CPUID_APIC | CPUID_SEP | \
-           CPUID_MTRR | CPUID_PGE | CPUID_MCA | CPUID_CMOV | CPUID_PAT | \
-           CPUID_PSE36 | CPUID_CLFLUSH | CPUID_ACPI | CPUID_MMX | \
--          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE)
-+          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE | \
-+          CPUID_HT)
-           /* partly implemented:
-           CPUID_MTRR, CPUID_MCA, CPUID_CLFLUSH (needed for Win64) */
-           /* missing:
--          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_HT, CPUID_TM, CPUID_PBE */
-+          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_TM, CPUID_PBE */
-
- /*
-  * Kernel-only features that can be shown to usermode programs even if
-@@ -848,7 +849,8 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
-vendor1,
-#define TCG_EXT3_FEATURES (CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM | \
-           CPUID_EXT3_CR8LEG | CPUID_EXT3_ABM | CPUID_EXT3_SSE4A | \
--          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES)
-+          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES | \
-+          CPUID_EXT3_CMP_LEG)
-
- #define TCG_EXT4_FEATURES 0
-[3] My colleague Alan noticed what appears to be a related problem: if
-we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
-explicitly removing the ht flag, but the guest still reports HT(cat /
-proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
-bit seems to be forced on even when the user tries to disable it.
-This has been the behavior of QEMU for many years, not some regression
-introduced by my patches. We can discuss how to address it separately.
-Best regards,
-Ewan
-
-On Tue, Apr 29, 2025 at 01:55:59PM +0800, Xiaoyao Li wrote:
->
-Date: Tue, 29 Apr 2025 13:55:59 +0800
->
-From: Xiaoyao Li <xiaoyao.li@intel.com>
->
-Subject: Re: [Bug] QEMU TCG warnings after commit c6bd2dd63420 - HTT /
->
-CMP_LEG bits
->
->
-On 4/29/2025 11:02 AM, Ewan Hai wrote:
->
-> Hi Community,
->
->
->
-> This email contains 3 bugs appear to share the same root cause.
->
->
->
-> [1] We ran into the following warnings when running QEMU v10.0.0 in TCG
->
-> mode:
->
->
->
-> qemu-system-x86_64 \
->
->    -machine q35 \
->
->    -m 4G -smp 4 \
->
->    -kernel ./arch/x86/boot/bzImage \
->
->    -bios /usr/share/ovmf/OVMF.fd \
->
->    -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
->
->    -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
->
->    -nographic \
->
->    -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
->
->
->
-> qemu-system-x86_64: warning: TCG doesn't support requested feature:
->
-> CPUID.01H:EDX.ht [bit 28]
->
-> qemu-system-x86_64: warning: TCG doesn't support requested feature:
->
-> CPUID.80000001H:ECX.cmp-legacy [bit 1]
->
-> (repeats 4 times, once per vCPU)
->
->
->
-> Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up
->
-> CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()" is
->
-> what introduced the warnings.
->
->
->
-> Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28])
->
-> and CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT
->
-> support, these bits trigger the warnings above.
->
->
->
-> [2] Also, Zhao pointed me to a similar report on GitLab:
->
->
-https://gitlab.com/qemu-project/qemu/-/issues/2894
->
-> The symptoms there look identical to what we're seeing.
->
->
->
-> By convention we file one issue per email, but these two appear to share
->
-> the same root cause, so I'm describing them together here.
->
->
-It was caused by my two patches. I think the fix can be as follow.
->
-If no objection from the community, I can submit the formal patch.
->
->
-diff --git a/target/i386/cpu.c b/target/i386/cpu.c
->
-index 1f970aa4daa6..fb95aadd6161 100644
->
---- a/target/i386/cpu.c
->
-+++ b/target/i386/cpu.c
->
-@@ -776,11 +776,12 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
->
-vendor1,
->
-CPUID_PAE | CPUID_MCE | CPUID_CX8 | CPUID_APIC | CPUID_SEP | \
->
-CPUID_MTRR | CPUID_PGE | CPUID_MCA | CPUID_CMOV | CPUID_PAT | \
->
-CPUID_PSE36 | CPUID_CLFLUSH | CPUID_ACPI | CPUID_MMX | \
->
--          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE)
->
-+          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE | \
->
-+          CPUID_HT)
->
-/* partly implemented:
->
-CPUID_MTRR, CPUID_MCA, CPUID_CLFLUSH (needed for Win64) */
->
-/* missing:
->
--          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_HT, CPUID_TM, CPUID_PBE */
->
-+          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_TM, CPUID_PBE */
->
->
-/*
->
-* Kernel-only features that can be shown to usermode programs even if
->
-@@ -848,7 +849,8 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
->
-vendor1,
->
->
-#define TCG_EXT3_FEATURES (CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM | \
->
-CPUID_EXT3_CR8LEG | CPUID_EXT3_ABM | CPUID_EXT3_SSE4A | \
->
--          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES)
->
-+          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES | \
->
-+          CPUID_EXT3_CMP_LEG)
->
->
-#define TCG_EXT4_FEATURES 0
-This fix is fine for me...at least from SDM, HTT depends on topology and
-it should exist when user sets "-smp 4".
-
->
-> [3] My colleague Alan noticed what appears to be a related problem: if
->
-> we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
->
-> explicitly removing the ht flag, but the guest still reports HT(cat
->
-> /proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
->
-> bit seems to be forced on even when the user tries to disable it.
->
->
-XiaoYao reminded me that issue [3] stems from a different patch. Please
->
-ignore it for now—I'll start a separate thread to discuss that one
->
-independently.
-I haven't found any other thread :-).
-
-By the way, just curious, in what cases do you need to disbale the HT
-flag? "-smp 4" means 4 cores with 1 thread per core, and is it not
-enough?
-
-As for the “-ht” behavior, I'm also unsure whether this should be fixed
-or not - one possible consideration is whether “-ht” would be useful.
-
-On 5/8/25 5:04 PM, Zhao Liu wrote:
-[3] My colleague Alan noticed what appears to be a related problem: if
-we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
-explicitly removing the ht flag, but the guest still reports HT(cat
-/proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
-bit seems to be forced on even when the user tries to disable it.
-XiaoYao reminded me that issue [3] stems from a different patch. Please
-ignore it for now—I'll start a separate thread to discuss that one
-independently.
-I haven't found any other thread :-).
-Please refer to
-https://lore.kernel.org/all/db6ae3bb-f4e5-4719-9beb-623fcff56af2@zhaoxin.com/
-.
-By the way, just curious, in what cases do you need to disbale the HT
-flag? "-smp 4" means 4 cores with 1 thread per core, and is it not
-enough?
-
-As for the “-ht” behavior, I'm also unsure whether this should be fixed
-or not - one possible consideration is whether “-ht” would be useful.
-I wasn't trying to target any specific use case, using "-ht" was simply a way to
-check how the ht feature behaves under both KVM and TCG. There's no special
-workload behind it; I just wanted to confirm that the flag is respected (or not)
-in each mode.
-
diff --git a/results/classifier/005/other/68897003 b/results/classifier/005/other/68897003
deleted file mode 100644
index 5076ebda..00000000
--- a/results/classifier/005/other/68897003
+++ /dev/null
@@ -1,724 +0,0 @@
-other: 0.714
-assembly: 0.697
-graphic: 0.694
-semantic: 0.671
-device: 0.647
-instruction: 0.641
-network: 0.614
-KVM: 0.598
-socket: 0.585
-boot: 0.569
-mistranslation: 0.535
-vnc: 0.525
-
-[Qemu-devel] [BUG] VM abort after migration
-
-Hi guys,
-
-We found a qemu core in our testing environment, the assertion
-'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
-the bus->irq_count[i] is '-1'.
-
-Through analysis, it was happened after VM migration and we think
-it was caused by the following sequence:
-
-*Migration Source*
-1. save bus pci.0 state, including irq_count[x] ( =0 , old )
-2. save E1000:
-   e1000_pre_save
-    e1000_mit_timer
-     set_interrupt_cause
-      pci_set_irq --> update pci_dev->irq_state to 1 and
-                  update bus->irq_count[x] to 1 ( new )
-    the irq_state sent to dest.
-
-*Migration Dest*
-1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
-2. If the e1000 need change irqline , it would call to pci_irq_handler(),
-  the irq_state maybe change to 0 and bus->irq_count[x] will become
-  -1 in this situation.
-3. do VM reboot then the assertion will be triggered.
-
-We also found some guys faced the similar problem:
-[1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
-[2]
-https://bugs.launchpad.net/qemu/+bug/1702621
-Is there some patches to fix this problem ?
-Can we save pcibus state after all the pci devs are saved ?
-
-Thanks,
-Longpeng(Mike)
-
-* longpeng (address@hidden) wrote:
->
-Hi guys,
->
->
-We found a qemu core in our testing environment, the assertion
->
-'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
->
-the bus->irq_count[i] is '-1'.
->
->
-Through analysis, it was happened after VM migration and we think
->
-it was caused by the following sequence:
->
->
-*Migration Source*
->
-1. save bus pci.0 state, including irq_count[x] ( =0 , old )
->
-2. save E1000:
->
-e1000_pre_save
->
-e1000_mit_timer
->
-set_interrupt_cause
->
-pci_set_irq --> update pci_dev->irq_state to 1 and
->
-update bus->irq_count[x] to 1 ( new )
->
-the irq_state sent to dest.
->
->
-*Migration Dest*
->
-1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
->
-2. If the e1000 need change irqline , it would call to pci_irq_handler(),
->
-the irq_state maybe change to 0 and bus->irq_count[x] will become
->
--1 in this situation.
->
-3. do VM reboot then the assertion will be triggered.
->
->
-We also found some guys faced the similar problem:
->
-[1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
->
-[2]
-https://bugs.launchpad.net/qemu/+bug/1702621
->
->
-Is there some patches to fix this problem ?
-I don't remember any.
-
->
-Can we save pcibus state after all the pci devs are saved ?
-Does this problem only happen with e1000? I think so.
-If it's only e1000 I think we should fix it - I think once the VM is
-stopped for doing the device migration it shouldn't be raising
-interrupts.
-
-Dave
-
->
-Thanks,
->
-Longpeng(Mike)
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
-* longpeng (address@hidden) wrote:
-Hi guys,
-
-We found a qemu core in our testing environment, the assertion
-'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
-the bus->irq_count[i] is '-1'.
-
-Through analysis, it was happened after VM migration and we think
-it was caused by the following sequence:
-
-*Migration Source*
-1. save bus pci.0 state, including irq_count[x] ( =0 , old )
-2. save E1000:
-    e1000_pre_save
-     e1000_mit_timer
-      set_interrupt_cause
-       pci_set_irq --> update pci_dev->irq_state to 1 and
-                   update bus->irq_count[x] to 1 ( new )
-     the irq_state sent to dest.
-
-*Migration Dest*
-1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
-2. If the e1000 need change irqline , it would call to pci_irq_handler(),
-   the irq_state maybe change to 0 and bus->irq_count[x] will become
-   -1 in this situation.
-3. do VM reboot then the assertion will be triggered.
-
-We also found some guys faced the similar problem:
-[1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
-[2]
-https://bugs.launchpad.net/qemu/+bug/1702621
-Is there some patches to fix this problem ?
-I don't remember any.
-Can we save pcibus state after all the pci devs are saved ?
-Does this problem only happen with e1000? I think so.
-If it's only e1000 I think we should fix it - I think once the VM is
-stopped for doing the device migration it shouldn't be raising
-interrupts.
-I wonder maybe we can simply fix this by no setting ICS on pre_save()
-but scheduling mit timer unconditionally in post_load().
-Thanks
-Dave
-Thanks,
-Longpeng(Mike)
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-在 2019/7/10 11:25, Jason Wang 写道:
->
->
-On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
->
-> * longpeng (address@hidden) wrote:
->
->> Hi guys,
->
->>
->
->> We found a qemu core in our testing environment, the assertion
->
->> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
->
->> the bus->irq_count[i] is '-1'.
->
->>
->
->> Through analysis, it was happened after VM migration and we think
->
->> it was caused by the following sequence:
->
->>
->
->> *Migration Source*
->
->> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
->
->> 2. save E1000:
->
->>     e1000_pre_save
->
->>      e1000_mit_timer
->
->>       set_interrupt_cause
->
->>        pci_set_irq --> update pci_dev->irq_state to 1 and
->
->>                    update bus->irq_count[x] to 1 ( new )
->
->>      the irq_state sent to dest.
->
->>
->
->> *Migration Dest*
->
->> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
->
->> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
->
->>    the irq_state maybe change to 0 and bus->irq_count[x] will become
->
->>    -1 in this situation.
->
->> 3. do VM reboot then the assertion will be triggered.
->
->>
->
->> We also found some guys faced the similar problem:
->
->> [1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
->
->> [2]
-https://bugs.launchpad.net/qemu/+bug/1702621
->
->>
->
->> Is there some patches to fix this problem ?
->
-> I don't remember any.
->
->
->
->> Can we save pcibus state after all the pci devs are saved ?
->
-> Does this problem only happen with e1000? I think so.
->
-> If it's only e1000 I think we should fix it - I think once the VM is
->
-> stopped for doing the device migration it shouldn't be raising
->
-> interrupts.
->
->
->
-I wonder maybe we can simply fix this by no setting ICS on pre_save() but
->
-scheduling mit timer unconditionally in post_load().
->
-I also think this is a bug of e1000 because we find more cores with the same
-frame thease days.
-
-I'm not familiar with e1000 so hope someone could fix it, thanks. :)
-
->
-Thanks
->
->
->
->
->
-> Dave
->
->
->
->> Thanks,
->
->> Longpeng(Mike)
->
-> --
->
-> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->
-.
->
--- 
-Regards,
-Longpeng(Mike)
-
-On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
-在 2019/7/10 11:25, Jason Wang 写道:
-On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
-* longpeng (address@hidden) wrote:
-Hi guys,
-
-We found a qemu core in our testing environment, the assertion
-'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
-the bus->irq_count[i] is '-1'.
-
-Through analysis, it was happened after VM migration and we think
-it was caused by the following sequence:
-
-*Migration Source*
-1. save bus pci.0 state, including irq_count[x] ( =0 , old )
-2. save E1000:
-     e1000_pre_save
-      e1000_mit_timer
-       set_interrupt_cause
-        pci_set_irq --> update pci_dev->irq_state to 1 and
-                    update bus->irq_count[x] to 1 ( new )
-      the irq_state sent to dest.
-
-*Migration Dest*
-1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
-2. If the e1000 need change irqline , it would call to pci_irq_handler(),
-    the irq_state maybe change to 0 and bus->irq_count[x] will become
-    -1 in this situation.
-3. do VM reboot then the assertion will be triggered.
-
-We also found some guys faced the similar problem:
-[1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
-[2]
-https://bugs.launchpad.net/qemu/+bug/1702621
-Is there some patches to fix this problem ?
-I don't remember any.
-Can we save pcibus state after all the pci devs are saved ?
-Does this problem only happen with e1000? I think so.
-If it's only e1000 I think we should fix it - I think once the VM is
-stopped for doing the device migration it shouldn't be raising
-interrupts.
-I wonder maybe we can simply fix this by no setting ICS on pre_save() but
-scheduling mit timer unconditionally in post_load().
-I also think this is a bug of e1000 because we find more cores with the same
-frame thease days.
-
-I'm not familiar with e1000 so hope someone could fix it, thanks. :)
-Draft a path in attachment, please test.
-
-Thanks
-Thanks
-Dave
-Thanks,
-Longpeng(Mike)
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-.
-0001-e1000-don-t-raise-interrupt-in-pre_save.patch
-Description:
-Text Data
-
-在 2019/7/10 11:57, Jason Wang 写道:
->
->
-On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
->
-> 在 2019/7/10 11:25, Jason Wang 写道:
->
->> On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
->
->>> * longpeng (address@hidden) wrote:
->
->>>> Hi guys,
->
->>>>
->
->>>> We found a qemu core in our testing environment, the assertion
->
->>>> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
->
->>>> the bus->irq_count[i] is '-1'.
->
->>>>
->
->>>> Through analysis, it was happened after VM migration and we think
->
->>>> it was caused by the following sequence:
->
->>>>
->
->>>> *Migration Source*
->
->>>> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
->
->>>> 2. save E1000:
->
->>>>      e1000_pre_save
->
->>>>       e1000_mit_timer
->
->>>>        set_interrupt_cause
->
->>>>         pci_set_irq --> update pci_dev->irq_state to 1 and
->
->>>>                     update bus->irq_count[x] to 1 ( new )
->
->>>>       the irq_state sent to dest.
->
->>>>
->
->>>> *Migration Dest*
->
->>>> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is
->
->>>> 1.
->
->>>> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
->
->>>>     the irq_state maybe change to 0 and bus->irq_count[x] will become
->
->>>>     -1 in this situation.
->
->>>> 3. do VM reboot then the assertion will be triggered.
->
->>>>
->
->>>> We also found some guys faced the similar problem:
->
->>>> [1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
->
->>>> [2]
-https://bugs.launchpad.net/qemu/+bug/1702621
->
->>>>
->
->>>> Is there some patches to fix this problem ?
->
->>> I don't remember any.
->
->>>
->
->>>> Can we save pcibus state after all the pci devs are saved ?
->
->>> Does this problem only happen with e1000? I think so.
->
->>> If it's only e1000 I think we should fix it - I think once the VM is
->
->>> stopped for doing the device migration it shouldn't be raising
->
->>> interrupts.
->
->>
->
->> I wonder maybe we can simply fix this by no setting ICS on pre_save() but
->
->> scheduling mit timer unconditionally in post_load().
->
->>
->
-> I also think this is a bug of e1000 because we find more cores with the same
->
-> frame thease days.
->
->
->
-> I'm not familiar with e1000 so hope someone could fix it, thanks. :)
->
->
->
->
-Draft a path in attachment, please test.
->
-Thanks. We'll test it for a few weeks and then give you the feedback. :)
-
->
-Thanks
->
->
->
->> Thanks
->
->>
->
->>
->
->>> Dave
->
->>>
->
->>>> Thanks,
->
->>>> Longpeng(Mike)
->
->>> --Â
->
->>> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->> .
->
->>
--- 
-Regards,
-Longpeng(Mike)
-
-在 2019/7/10 11:57, Jason Wang 写道:
->
->
-On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
->
-> 在 2019/7/10 11:25, Jason Wang 写道:
->
->> On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
->
->>> * longpeng (address@hidden) wrote:
->
->>>> Hi guys,
->
->>>>
->
->>>> We found a qemu core in our testing environment, the assertion
->
->>>> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
->
->>>> the bus->irq_count[i] is '-1'.
->
->>>>
->
->>>> Through analysis, it was happened after VM migration and we think
->
->>>> it was caused by the following sequence:
->
->>>>
->
->>>> *Migration Source*
->
->>>> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
->
->>>> 2. save E1000:
->
->>>>      e1000_pre_save
->
->>>>       e1000_mit_timer
->
->>>>        set_interrupt_cause
->
->>>>         pci_set_irq --> update pci_dev->irq_state to 1 and
->
->>>>                     update bus->irq_count[x] to 1 ( new )
->
->>>>       the irq_state sent to dest.
->
->>>>
->
->>>> *Migration Dest*
->
->>>> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is
->
->>>> 1.
->
->>>> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
->
->>>>     the irq_state maybe change to 0 and bus->irq_count[x] will become
->
->>>>     -1 in this situation.
->
->>>> 3. do VM reboot then the assertion will be triggered.
->
->>>>
->
->>>> We also found some guys faced the similar problem:
->
->>>> [1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
->
->>>> [2]
-https://bugs.launchpad.net/qemu/+bug/1702621
->
->>>>
->
->>>> Is there some patches to fix this problem ?
->
->>> I don't remember any.
->
->>>
->
->>>> Can we save pcibus state after all the pci devs are saved ?
->
->>> Does this problem only happen with e1000? I think so.
->
->>> If it's only e1000 I think we should fix it - I think once the VM is
->
->>> stopped for doing the device migration it shouldn't be raising
->
->>> interrupts.
->
->>
->
->> I wonder maybe we can simply fix this by no setting ICS on pre_save() but
->
->> scheduling mit timer unconditionally in post_load().
->
->>
->
-> I also think this is a bug of e1000 because we find more cores with the same
->
-> frame thease days.
->
->
->
-> I'm not familiar with e1000 so hope someone could fix it, thanks. :)
->
->
->
->
-Draft a path in attachment, please test.
->
-Hi Jason,
-
-We've tested the patch for about two weeks, everything went well, thanks!
-
-Feel free to add my:
-Reported-and-tested-by: Longpeng <address@hidden>
-
->
-Thanks
->
->
->
->> Thanks
->
->>
->
->>
->
->>> Dave
->
->>>
->
->>>> Thanks,
->
->>>> Longpeng(Mike)
->
->>> --Â
->
->>> Dr. David Alan Gilbert / address@hidden / Manchester, UK
->
->> .
->
->>
--- 
-Regards,
-Longpeng(Mike)
-
-On 2019/7/27 下午2:10, Longpeng (Mike) wrote:
-在 2019/7/10 11:57, Jason Wang 写道:
-On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
-在 2019/7/10 11:25, Jason Wang 写道:
-On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
-* longpeng (address@hidden) wrote:
-Hi guys,
-
-We found a qemu core in our testing environment, the assertion
-'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
-the bus->irq_count[i] is '-1'.
-
-Through analysis, it was happened after VM migration and we think
-it was caused by the following sequence:
-
-*Migration Source*
-1. save bus pci.0 state, including irq_count[x] ( =0 , old )
-2. save E1000:
-      e1000_pre_save
-       e1000_mit_timer
-        set_interrupt_cause
-         pci_set_irq --> update pci_dev->irq_state to 1 and
-                     update bus->irq_count[x] to 1 ( new )
-       the irq_state sent to dest.
-
-*Migration Dest*
-1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
-2. If the e1000 need change irqline , it would call to pci_irq_handler(),
-     the irq_state maybe change to 0 and bus->irq_count[x] will become
-     -1 in this situation.
-3. do VM reboot then the assertion will be triggered.
-
-We also found some guys faced the similar problem:
-[1]
-https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
-[2]
-https://bugs.launchpad.net/qemu/+bug/1702621
-Is there some patches to fix this problem ?
-I don't remember any.
-Can we save pcibus state after all the pci devs are saved ?
-Does this problem only happen with e1000? I think so.
-If it's only e1000 I think we should fix it - I think once the VM is
-stopped for doing the device migration it shouldn't be raising
-interrupts.
-I wonder maybe we can simply fix this by no setting ICS on pre_save() but
-scheduling mit timer unconditionally in post_load().
-I also think this is a bug of e1000 because we find more cores with the same
-frame thease days.
-
-I'm not familiar with e1000 so hope someone could fix it, thanks. :)
-Draft a path in attachment, please test.
-Hi Jason,
-
-We've tested the patch for about two weeks, everything went well, thanks!
-
-Feel free to add my:
-Reported-and-tested-by: Longpeng <address@hidden>
-Applied.
-
-Thanks
-Thanks
-Thanks
-Dave
-Thanks,
-Longpeng(Mike)
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-.
-
diff --git a/results/classifier/005/other/70021271 b/results/classifier/005/other/70021271
deleted file mode 100644
index b8e3e535..00000000
--- a/results/classifier/005/other/70021271
+++ /dev/null
@@ -1,7456 +0,0 @@
-other: 0.963
-graphic: 0.958
-KVM: 0.949
-semantic: 0.946
-mistranslation: 0.929
-assembly: 0.910
-vnc: 0.900
-device: 0.887
-instruction: 0.880
-socket: 0.873
-network: 0.873
-boot: 0.872
-
-[Qemu-devel] [BUG]Unassigned mem write during pci device hot-plug
-
-Hi all,
-
-In our test, we configured VM with several pci-bridges and a virtio-net nic 
-been attached with bus 4,
-After VM is startup, We ping this nic from host to judge if it is working 
-normally. Then, we hot add pci devices to this VM with bus 0.
-We  found the virtio-net NIC in bus 4 is not working (can not connect) 
-occasionally, as it kick virtio backend failure with error below:
-    Unassigned mem write 00000000fc803004 = 0x1
-
-memory-region: pci_bridge_pci
-  0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
-    00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
-      00000000fc800000-00000000fc800fff (prio 0, RW): virtio-pci-common
-      00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
-      00000000fc802000-00000000fc802fff (prio 0, RW): virtio-pci-device
-      00000000fc803000-00000000fc803fff (prio 0, RW): virtio-pci-notify  <- io 
-mem unassigned
-      …
-
-We caught an exceptional address changing while this problem happened, show as 
-follow:
-Before pci_bridge_update_mappings：
-      00000000fc000000-00000000fc1fffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fc000000-00000000fc1fffff
-      00000000fc200000-00000000fc3fffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fc200000-00000000fc3fffff
-      00000000fc400000-00000000fc5fffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fc400000-00000000fc5fffff
-      00000000fc600000-00000000fc7fffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fc600000-00000000fc7fffff
-      00000000fc800000-00000000fc9fffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fc800000-00000000fc9fffff <- correct Adress Spce
-      00000000fca00000-00000000fcbfffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fca00000-00000000fcbfffff
-      00000000fcc00000-00000000fcdfffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fcc00000-00000000fcdfffff
-      00000000fce00000-00000000fcffffff (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci 00000000fce00000-00000000fcffffff
-
-After pci_bridge_update_mappings：
-      00000000fda00000-00000000fdbfffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fda00000-00000000fdbfffff
-      00000000fdc00000-00000000fddfffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fdc00000-00000000fddfffff
-      00000000fde00000-00000000fdffffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fde00000-00000000fdffffff
-      00000000fe000000-00000000fe1fffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fe000000-00000000fe1fffff
-      00000000fe200000-00000000fe3fffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fe200000-00000000fe3fffff
-      00000000fe400000-00000000fe5fffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fe400000-00000000fe5fffff
-      00000000fe600000-00000000fe7fffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fe600000-00000000fe7fffff
-      00000000fe800000-00000000fe9fffff (prio 1, RW): alias pci_bridge_mem 
-@pci_bridge_pci 00000000fe800000-00000000fe9fffff
-      fffffffffc800000-fffffffffc800000 (prio 1, RW): alias pci_bridge_pref_mem 
-@pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress Space
-
-We have figured out why this address becomes this value,  according to pci 
-spec,  pci driver can get BAR address size by writing 0xffffffff to
-the pci register firstly, and then read back the value from this register.
-We didn't handle this value  specially while process pci write in qemu, the 
-function call stack is:
-Pci_bridge_dev_write_config
--> pci_bridge_write_config
--> pci_default_write_config (we update the config[address] value here to 
-fffffffffc800000, which should be 0xfc800000 )
--> pci_bridge_update_mappings
-                ->pci_bridge_region_del(br, br->windows);
--> pci_bridge_region_init
-                                                                
-->pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong value 
-fffffffffc800000)
-                                                -> 
-memory_region_transaction_commit
-
-So, as we can see, we use the wrong base address in qemu to update the memory 
-regions, though, we update the base address to
-The correct value after pci driver in VM write the original value back, the 
-virtio NIC in bus 4 may still sends net packets concurrently with
-The wrong memory region address.
-
-We have tried to skip the memory region update action in qemu while detect pci 
-write with 0xffffffff value, and it does work, but
-This seems to be not gently.
-
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
-index b2e50c3..84b405d 100644
---- a/hw/pci/pci_bridge.c
-+++ b/hw/pci/pci_bridge.c
-@@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
-     pci_default_write_config(d, address, val, len);
--    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
-+    if ( (val != 0xffffffff) &&
-+        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
-         /* io base/limit */
-         ranges_overlap(address, len, PCI_IO_BASE, 2) ||
-@@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
-         ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
-         /* vga enable */
--        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
-+        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
-         pci_bridge_update_mappings(s);
-     }
-
-Thinks,
-Xu
-
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-Hi all,
->
->
->
->
-In our test, we configured VM with several pci-bridges and a virtio-net nic
->
-been attached with bus 4,
->
->
-After VM is startup, We ping this nic from host to judge if it is working
->
-normally. Then, we hot add pci devices to this VM with bus 0.
->
->
-We  found the virtio-net NIC in bus 4 is not working (can not connect)
->
-occasionally, as it kick virtio backend failure with error below:
->
->
-Unassigned mem write 00000000fc803004 = 0x1
-Thanks for the report. Which guest was used to produce this problem?
-
--- 
-MST
-
-n Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> Hi all,
->
->
->
->
->
->
->
-> In our test, we configured VM with several pci-bridges and a
->
-> virtio-net nic been attached with bus 4,
->
->
->
-> After VM is startup, We ping this nic from host to judge if it is
->
-> working normally. Then, we hot add pci devices to this VM with bus 0.
->
->
->
-> We  found the virtio-net NIC in bus 4 is not working (can not connect)
->
-> occasionally, as it kick virtio backend failure with error below:
->
->
->
->     Unassigned mem write 00000000fc803004 = 0x1
->
->
-Thanks for the report. Which guest was used to produce this problem?
->
->
---
->
-MST
-I was seeing this problem when I hotplug a VFIO device to guest CentOS 7.4,
-after that I compiled the latest Linux kernel and it also contains this problem.
-
-Thinks,
-Xu
-
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-Hi all,
->
->
->
->
-In our test, we configured VM with several pci-bridges and a virtio-net nic
->
-been attached with bus 4,
->
->
-After VM is startup, We ping this nic from host to judge if it is working
->
-normally. Then, we hot add pci devices to this VM with bus 0.
->
->
-We  found the virtio-net NIC in bus 4 is not working (can not connect)
->
-occasionally, as it kick virtio backend failure with error below:
->
->
-Unassigned mem write 00000000fc803004 = 0x1
->
->
->
->
-memory-region: pci_bridge_pci
->
->
-0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
->
->
-00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
->
-00000000fc800000-00000000fc800fff (prio 0, RW): virtio-pci-common
->
->
-00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
->
->
-00000000fc802000-00000000fc802fff (prio 0, RW): virtio-pci-device
->
->
-00000000fc803000-00000000fc803fff (prio 0, RW): virtio-pci-notify  <- io
->
-mem unassigned
->
->
-…
->
->
->
->
-We caught an exceptional address changing while this problem happened, show as
->
-follow:
->
->
-Before pci_bridge_update_mappings：
->
->
-00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fc000000-00000000fc1fffff
->
->
-00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fc200000-00000000fc3fffff
->
->
-00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fc400000-00000000fc5fffff
->
->
-00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fc600000-00000000fc7fffff
->
->
-00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fc800000-00000000fc9fffff <- correct Adress Spce
->
->
-00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fca00000-00000000fcbfffff
->
->
-00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fcc00000-00000000fcdfffff
->
->
-00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci 00000000fce00000-00000000fcffffff
->
->
->
->
-After pci_bridge_update_mappings：
->
->
-00000000fda00000-00000000fdbfffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fda00000-00000000fdbfffff
->
->
-00000000fdc00000-00000000fddfffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fdc00000-00000000fddfffff
->
->
-00000000fde00000-00000000fdffffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fde00000-00000000fdffffff
->
->
-00000000fe000000-00000000fe1fffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fe000000-00000000fe1fffff
->
->
-00000000fe200000-00000000fe3fffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fe200000-00000000fe3fffff
->
->
-00000000fe400000-00000000fe5fffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fe400000-00000000fe5fffff
->
->
-00000000fe600000-00000000fe7fffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fe600000-00000000fe7fffff
->
->
-00000000fe800000-00000000fe9fffff (prio 1, RW): alias pci_bridge_mem
->
-@pci_bridge_pci 00000000fe800000-00000000fe9fffff
->
->
-fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-@pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
->
-Space
-This one is empty though right?
-
->
->
->
-We have figured out why this address becomes this value,  according to pci
->
-spec,  pci driver can get BAR address size by writing 0xffffffff to
->
->
-the pci register firstly, and then read back the value from this register.
-OK however as you show below the BAR being sized is the BAR
-if a bridge. Are you then adding a bridge device by hotplug?
-
-
-
->
-We didn't handle this value  specially while process pci write in qemu, the
->
-function call stack is:
->
->
-Pci_bridge_dev_write_config
->
->
--> pci_bridge_write_config
->
->
--> pci_default_write_config (we update the config[address] value here to
->
-fffffffffc800000, which should be 0xfc800000 )
->
->
--> pci_bridge_update_mappings
->
->
-->pci_bridge_region_del(br, br->windows);
->
->
--> pci_bridge_region_init
->
->
-->
->
-pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong value
->
-fffffffffc800000)
->
->
-->
->
-memory_region_transaction_commit
->
->
->
->
-So, as we can see, we use the wrong base address in qemu to update the memory
->
-regions, though, we update the base address to
->
->
-The correct value after pci driver in VM write the original value back, the
->
-virtio NIC in bus 4 may still sends net packets concurrently with
->
->
-The wrong memory region address.
->
->
->
->
-We have tried to skip the memory region update action in qemu while detect pci
->
-write with 0xffffffff value, and it does work, but
->
->
-This seems to be not gently.
-For sure. But I'm still puzzled as to why does Linux try to
-size the BAR of the bridge while a device behind it is
-used.
-
-Can you pls post your QEMU command line?
-
-
-
->
->
->
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
->
->
-index b2e50c3..84b405d 100644
->
->
---- a/hw/pci/pci_bridge.c
->
->
-+++ b/hw/pci/pci_bridge.c
->
->
-@@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
->
->
-pci_default_write_config(d, address, val, len);
->
->
--    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
-+    if ( (val != 0xffffffff) &&
->
->
-+        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
-/* io base/limit */
->
->
-ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
->
-@@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
->
->
-ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
->
-/* vga enable */
->
->
--        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
->
-+        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
->
->
-pci_bridge_update_mappings(s);
->
->
-}
->
->
->
->
-Thinks,
->
->
-Xu
->
-
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> Hi all,
->
->
->
->
->
->
->
-> In our test, we configured VM with several pci-bridges and a
->
-> virtio-net nic been attached with bus 4,
->
->
->
-> After VM is startup, We ping this nic from host to judge if it is
->
-> working normally. Then, we hot add pci devices to this VM with bus 0.
->
->
->
-> We  found the virtio-net NIC in bus 4 is not working (can not connect)
->
-> occasionally, as it kick virtio backend failure with error below:
->
->
->
->     Unassigned mem write 00000000fc803004 = 0x1
->
->
->
->
->
->
->
-> memory-region: pci_bridge_pci
->
->
->
->   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
->
->
->
->     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
->
->
->       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> virtio-pci-common
->
->
->
->       00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
->
->
->
->       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> virtio-pci-device
->
->
->
->       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> virtio-pci-notify  <- io mem unassigned
->
->
->
->       …
->
->
->
->
->
->
->
-> We caught an exceptional address changing while this problem happened,
->
-> show as
->
-> follow:
->
->
->
-> Before pci_bridge_update_mappings：
->
->
->
->       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fc000000-00000000fc1fffff
->
->
->
->       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fc200000-00000000fc3fffff
->
->
->
->       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fc400000-00000000fc5fffff
->
->
->
->       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fc600000-00000000fc7fffff
->
->
->
->       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fc800000-00000000fc9fffff
->
-> <- correct Adress Spce
->
->
->
->       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fca00000-00000000fcbfffff
->
->
->
->       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fcc00000-00000000fcdfffff
->
->
->
->       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> pci_bridge_pref_mem @pci_bridge_pci 00000000fce00000-00000000fcffffff
->
->
->
->
->
->
->
-> After pci_bridge_update_mappings：
->
->
->
->       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
->
->
->
->       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
->
->
->
->       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
->
->
->
->       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
->
->
->
->       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
->
->
->
->       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
->
->
->
->       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
->
->
->
->       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
->
->
->
->       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-> pci_bridge_pref_mem
->
-> @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
->
-Space
->
->
-This one is empty though right?
->
->
->
->
->
->
-> We have figured out why this address becomes this value,  according to
->
-> pci spec,  pci driver can get BAR address size by writing 0xffffffff
->
-> to
->
->
->
-> the pci register firstly, and then read back the value from this register.
->
->
->
-OK however as you show below the BAR being sized is the BAR if a bridge. Are
->
-you then adding a bridge device by hotplug?
-No, I just simply hot plugged a VFIO device to Bus 0, another interesting 
-phenomenon is
-If I hot plug the device to other bus, this doesn't happened.
- 
->
->
->
-> We didn't handle this value  specially while process pci write in
->
-> qemu, the function call stack is:
->
->
->
-> Pci_bridge_dev_write_config
->
->
->
-> -> pci_bridge_write_config
->
->
->
-> -> pci_default_write_config (we update the config[address] value here
->
-> -> to
->
-> fffffffffc800000, which should be 0xfc800000 )
->
->
->
-> -> pci_bridge_update_mappings
->
->
->
->                 ->pci_bridge_region_del(br, br->windows);
->
->
->
-> -> pci_bridge_region_init
->
->
->
->                                                                 ->
->
-> pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
->
-> value
->
-> fffffffffc800000)
->
->
->
->                                                 ->
->
-> memory_region_transaction_commit
->
->
->
->
->
->
->
-> So, as we can see, we use the wrong base address in qemu to update the
->
-> memory regions, though, we update the base address to
->
->
->
-> The correct value after pci driver in VM write the original value
->
-> back, the virtio NIC in bus 4 may still sends net packets concurrently
->
-> with
->
->
->
-> The wrong memory region address.
->
->
->
->
->
->
->
-> We have tried to skip the memory region update action in qemu while
->
-> detect pci write with 0xffffffff value, and it does work, but
->
->
->
-> This seems to be not gently.
->
->
-For sure. But I'm still puzzled as to why does Linux try to size the BAR of
->
-the
->
-bridge while a device behind it is used.
->
->
-Can you pls post your QEMU command line?
-My QEMU command line:
-/root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S -object 
-secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-Linux/master-key.aes
- -machine pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu 
-host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m 
-size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp 
-20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024 -numa 
-node,nodeid=1,cpus=5-9,mem=1024 -numa node,nodeid=2,cpus=10-14,mem=1024 -numa 
-node,nodeid=3,cpus=15-19,mem=1024 -uuid 34a588c7-b0f2-4952-b39c-47fae3411439 
--no-user-config -nodefaults -chardev 
-socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/monitor.sock,server,nowait
- -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet 
--global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on -device 
-pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device 
-pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device 
-pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device 
-pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device 
-pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device 
-piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device 
-usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device 
-nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device 
-virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device 
-virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device 
-virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device 
-virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device 
-virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive 
-file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-virtio-disk0,cache=none
- -device 
-virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
- -drive if=none,id=drive-ide0-1-1,readonly=on,cache=none -device 
-ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev 
-tap,fd=35,id=hostnet0 -device 
-virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4,addr=0x1 
--chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 
--device usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device 
-cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device 
-virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
-
-I am also very curious about this issue, in the linux kernel code, maybe double 
-check in function pci_bridge_check_ranges triggered this problem.
-
-
->
->
->
->
->
->
->
->
-> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
->
->
->
-> index b2e50c3..84b405d 100644
->
->
->
-> --- a/hw/pci/pci_bridge.c
->
->
->
-> +++ b/hw/pci/pci_bridge.c
->
->
->
-> @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
->
->
->
->      pci_default_write_config(d, address, val, len);
->
->
->
-> -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
->
-> +    if ( (val != 0xffffffff) &&
->
->
->
-> +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
->
->          /* io base/limit */
->
->
->
->          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
->
->
-> @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
->
->
->
->          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
->
->
->          /* vga enable */
->
->
->
-> -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
->
->
-> +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
->
->
->
->          pci_bridge_update_mappings(s);
->
->
->
->      }
->
->
->
->
->
->
->
-> Thinks,
->
->
->
-> Xu
->
->
-
-On Mon, Dec 10, 2018 at 03:12:53AM +0000, xuyandong wrote:
->
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > Hi all,
->
-> >
->
-> >
->
-> >
->
-> > In our test, we configured VM with several pci-bridges and a
->
-> > virtio-net nic been attached with bus 4,
->
-> >
->
-> > After VM is startup, We ping this nic from host to judge if it is
->
-> > working normally. Then, we hot add pci devices to this VM with bus 0.
->
-> >
->
-> > We  found the virtio-net NIC in bus 4 is not working (can not connect)
->
-> > occasionally, as it kick virtio backend failure with error below:
->
-> >
->
-> >     Unassigned mem write 00000000fc803004 = 0x1
->
-> >
->
-> >
->
-> >
->
-> > memory-region: pci_bridge_pci
->
-> >
->
-> >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
->
-> >
->
-> >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
-> >
->
-> >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > virtio-pci-common
->
-> >
->
-> >       00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
->
-> >
->
-> >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > virtio-pci-device
->
-> >
->
-> >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > virtio-pci-notify  <- io mem unassigned
->
-> >
->
-> >       …
->
-> >
->
-> >
->
-> >
->
-> > We caught an exceptional address changing while this problem happened,
->
-> > show as
->
-> > follow:
->
-> >
->
-> > Before pci_bridge_update_mappings：
->
-> >
->
-> >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc000000-00000000fc1fffff
->
-> >
->
-> >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc200000-00000000fc3fffff
->
-> >
->
-> >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc400000-00000000fc5fffff
->
-> >
->
-> >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc600000-00000000fc7fffff
->
-> >
->
-> >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc800000-00000000fc9fffff
->
-> > <- correct Adress Spce
->
-> >
->
-> >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fca00000-00000000fcbfffff
->
-> >
->
-> >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fcc00000-00000000fcdfffff
->
-> >
->
-> >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> > pci_bridge_pref_mem @pci_bridge_pci 00000000fce00000-00000000fcffffff
->
-> >
->
-> >
->
-> >
->
-> > After pci_bridge_update_mappings：
->
-> >
->
-> >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
->
-> >
->
-> >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
->
-> >
->
-> >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
->
-> >
->
-> >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
->
-> >
->
-> >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
->
-> >
->
-> >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
->
-> >
->
-> >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
->
-> >
->
-> >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
->
-> >
->
-> >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-> > pci_bridge_pref_mem
->
-> > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
->
-> Space
->
->
->
-> This one is empty though right?
->
->
->
-> >
->
-> >
->
-> > We have figured out why this address becomes this value,  according to
->
-> > pci spec,  pci driver can get BAR address size by writing 0xffffffff
->
-> > to
->
-> >
->
-> > the pci register firstly, and then read back the value from this register.
->
->
->
->
->
-> OK however as you show below the BAR being sized is the BAR if a bridge. Are
->
-> you then adding a bridge device by hotplug?
->
->
-No, I just simply hot plugged a VFIO device to Bus 0, another interesting
->
-phenomenon is
->
-If I hot plug the device to other bus, this doesn't happened.
->
->
->
->
->
->
-> > We didn't handle this value  specially while process pci write in
->
-> > qemu, the function call stack is:
->
-> >
->
-> > Pci_bridge_dev_write_config
->
-> >
->
-> > -> pci_bridge_write_config
->
-> >
->
-> > -> pci_default_write_config (we update the config[address] value here
->
-> > -> to
->
-> > fffffffffc800000, which should be 0xfc800000 )
->
-> >
->
-> > -> pci_bridge_update_mappings
->
-> >
->
-> >                 ->pci_bridge_region_del(br, br->windows);
->
-> >
->
-> > -> pci_bridge_region_init
->
-> >
->
-> >                                                                 ->
->
-> > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
->
-> > value
->
-> > fffffffffc800000)
->
-> >
->
-> >                                                 ->
->
-> > memory_region_transaction_commit
->
-> >
->
-> >
->
-> >
->
-> > So, as we can see, we use the wrong base address in qemu to update the
->
-> > memory regions, though, we update the base address to
->
-> >
->
-> > The correct value after pci driver in VM write the original value
->
-> > back, the virtio NIC in bus 4 may still sends net packets concurrently
->
-> > with
->
-> >
->
-> > The wrong memory region address.
->
-> >
->
-> >
->
-> >
->
-> > We have tried to skip the memory region update action in qemu while
->
-> > detect pci write with 0xffffffff value, and it does work, but
->
-> >
->
-> > This seems to be not gently.
->
->
->
-> For sure. But I'm still puzzled as to why does Linux try to size the BAR of
->
-> the
->
-> bridge while a device behind it is used.
->
->
->
-> Can you pls post your QEMU command line?
->
->
-My QEMU command line:
->
-/root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S -object
->
-secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-Linux/master-key.aes
->
--machine pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
->
-20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024 -numa
->
-node,nodeid=1,cpus=5-9,mem=1024 -numa node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-node,nodeid=3,cpus=15-19,mem=1024 -uuid 34a588c7-b0f2-4952-b39c-47fae3411439
->
--no-user-config -nodefaults -chardev
->
-socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/monitor.sock,server,nowait
->
--mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
->
--global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on -device
->
-pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-virtio-disk0,cache=none
->
--device
->
-virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
->
--drive if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
->
-tap,fd=35,id=hostnet0 -device
->
-virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4,addr=0x1
->
--chardev pty,id=charserial0 -device
->
-isa-serial,chardev=charserial0,id=serial0 -device
->
-usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
->
->
-I am also very curious about this issue, in the linux kernel code, maybe
->
-double check in function pci_bridge_check_ranges triggered this problem.
-If you can get the stacktrace in Linux when it tries to write this
-fffff value, that would be quite helpful.
-
-
->
->
->
->
->
->
->
->
-> >
->
-> >
->
-> > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
->
-> >
->
-> > index b2e50c3..84b405d 100644
->
-> >
->
-> > --- a/hw/pci/pci_bridge.c
->
-> >
->
-> > +++ b/hw/pci/pci_bridge.c
->
-> >
->
-> > @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
->
-> >
->
-> >      pci_default_write_config(d, address, val, len);
->
-> >
->
-> > -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
-> >
->
-> > +    if ( (val != 0xffffffff) &&
->
-> >
->
-> > +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
-> >
->
-> >          /* io base/limit */
->
-> >
->
-> >          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-> >
->
-> > @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
->
-> >
->
-> >          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-> >
->
-> >          /* vga enable */
->
-> >
->
-> > -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
-> >
->
-> > +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
->
-> >
->
-> >          pci_bridge_update_mappings(s);
->
-> >
->
-> >      }
->
-> >
->
-> >
->
-> >
->
-> > Thinks,
->
-> >
->
-> > Xu
->
-> >
-
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > Hi all,
->
-> > >
->
-> > >
->
-> > >
->
-> > > In our test, we configured VM with several pci-bridges and a
->
-> > > virtio-net nic been attached with bus 4,
->
-> > >
->
-> > > After VM is startup, We ping this nic from host to judge if it is
->
-> > > working normally. Then, we hot add pci devices to this VM with bus 0.
->
-> > >
->
-> > > We  found the virtio-net NIC in bus 4 is not working (can not
->
-> > > connect) occasionally, as it kick virtio backend failure with error
->
-> > > below:
->
-> > >
->
-> > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > >
->
-> > >
->
-> > >
->
-> > > memory-region: pci_bridge_pci
->
-> > >
->
-> > >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
->
-> > >
->
-> > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
-> > >
->
-> > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > virtio-pci-common
->
-> > >
->
-> > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > virtio-pci-isr
->
-> > >
->
-> > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > virtio-pci-device
->
-> > >
->
-> > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > virtio-pci-notify  <- io mem unassigned
->
-> > >
->
-> > >       …
->
-> > >
->
-> > >
->
-> > >
->
-> > > We caught an exceptional address changing while this problem
->
-> > > happened, show as
->
-> > > follow:
->
-> > >
->
-> > > Before pci_bridge_update_mappings：
->
-> > >
->
-> > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fc000000-00000000fc1fffff
->
-> > >
->
-> > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fc200000-00000000fc3fffff
->
-> > >
->
-> > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fc400000-00000000fc5fffff
->
-> > >
->
-> > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fc600000-00000000fc7fffff
->
-> > >
->
-> > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fc800000-00000000fc9fffff
->
-> > > <- correct Adress Spce
->
-> > >
->
-> > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fca00000-00000000fcbfffff
->
-> > >
->
-> > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fcc00000-00000000fcdfffff
->
-> > >
->
-> > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > 00000000fce00000-00000000fcffffff
->
-> > >
->
-> > >
->
-> > >
->
-> > > After pci_bridge_update_mappings：
->
-> > >
->
-> > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
->
-> > >
->
-> > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
->
-> > >
->
-> > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
->
-> > >
->
-> > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
->
-> > >
->
-> > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
->
-> > >
->
-> > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
->
-> > >
->
-> > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
->
-> > >
->
-> > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> > > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
->
-> > >
->
-> > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-pci_bridge_pref_mem
->
-> > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
->
-> > > Adress
->
-> > Space
->
-> >
->
-> > This one is empty though right?
->
-> >
->
-> > >
->
-> > >
->
-> > > We have figured out why this address becomes this value,
->
-> > > according to pci spec,  pci driver can get BAR address size by
->
-> > > writing 0xffffffff to
->
-> > >
->
-> > > the pci register firstly, and then read back the value from this
->
-> > > register.
->
-> >
->
-> >
->
-> > OK however as you show below the BAR being sized is the BAR if a
->
-> > bridge. Are you then adding a bridge device by hotplug?
->
->
->
-> No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> interesting phenomenon is If I hot plug the device to other bus, this
->
-> doesn't
->
-happened.
->
->
->
-> >
->
-> >
->
-> > > We didn't handle this value  specially while process pci write in
->
-> > > qemu, the function call stack is:
->
-> > >
->
-> > > Pci_bridge_dev_write_config
->
-> > >
->
-> > > -> pci_bridge_write_config
->
-> > >
->
-> > > -> pci_default_write_config (we update the config[address] value
->
-> > > -> here to
->
-> > > fffffffffc800000, which should be 0xfc800000 )
->
-> > >
->
-> > > -> pci_bridge_update_mappings
->
-> > >
->
-> > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > >
->
-> > > -> pci_bridge_region_init
->
-> > >
->
-> > >                                                                 ->
->
-> > > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
->
-> > > value
->
-> > > fffffffffc800000)
->
-> > >
->
-> > >                                                 ->
->
-> > > memory_region_transaction_commit
->
-> > >
->
-> > >
->
-> > >
->
-> > > So, as we can see, we use the wrong base address in qemu to update
->
-> > > the memory regions, though, we update the base address to
->
-> > >
->
-> > > The correct value after pci driver in VM write the original value
->
-> > > back, the virtio NIC in bus 4 may still sends net packets
->
-> > > concurrently with
->
-> > >
->
-> > > The wrong memory region address.
->
-> > >
->
-> > >
->
-> > >
->
-> > > We have tried to skip the memory region update action in qemu
->
-> > > while detect pci write with 0xffffffff value, and it does work,
->
-> > > but
->
-> > >
->
-> > > This seems to be not gently.
->
-> >
->
-> > For sure. But I'm still puzzled as to why does Linux try to size the
->
-> > BAR of the bridge while a device behind it is used.
->
-> >
->
-> > Can you pls post your QEMU command line?
->
->
->
-> My QEMU command line:
->
-> /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
->
-> -object
->
-> secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-
->
-> Linux/master-key.aes -machine
->
-> pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
->
-> 20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024
->
-> -numa node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
->
-> -chardev
->
-> socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/moni
->
-> tor.sock,server,nowait -mon
->
-> chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
->
-> -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on
->
-> -device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-v
->
-> irtio-disk0,cache=none -device
->
-> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id
->
-> =virtio-disk0,bootindex=1 -drive
->
-> if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
->
-> tap,fd=35,id=hostnet0 -device
->
-> virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4
->
-> ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> isa-serial,chardev=charserial0,id=serial0 -device
->
-> usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
->
->
->
-> I am also very curious about this issue, in the linux kernel code, maybe
->
-> double
->
-check in function pci_bridge_check_ranges triggered this problem.
->
->
-If you can get the stacktrace in Linux when it tries to write this fffff
->
-value, that
->
-would be quite helpful.
->
-After I add mdelay(100) in function pci_bridge_check_ranges, this phenomenon is
-easier to reproduce, below is my modify in kernel:
-diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
-index cb389277..86e232d 100644
---- a/drivers/pci/setup-bus.c
-+++ b/drivers/pci/setup-bus.c
-@@ -27,7 +27,7 @@
- #include <linux/slab.h>
- #include <linux/acpi.h>
- #include "pci.h"
--
-+#include <linux/delay.h>
- unsigned int pci_flags;
- 
- struct pci_dev_resource {
-@@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
-                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
-                                               0xffffffff);
-                pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
-+               mdelay(100);
-+               printk(KERN_ERR "sleep\n");
-+                dump_stack();
-                if (!tmp)
-                        b_res[2].flags &= ~IORESOURCE_MEM_64;
-                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
-
-After hot plugging, we get the following log:
-
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:14.0: BAR 0: assigned [mem 
-0xc2360000-0xc237ffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:14.0: BAR 3: assigned [mem 
-0xc2328000-0xc232bfff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:18 uefi-linux kernel: sleep
-Dec 11 09:28:18 uefi-linux kernel: CPU: 16 PID: 502 Comm: kworker/u40:1 Not 
-tainted 4.11.0-rc3+ #11
-Dec 11 09:28:18 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
-PIIX, 1996), BIOS 0.0.0 02/06/2015
-Dec 11 09:28:18 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
-Dec 11 09:28:18 uefi-linux kernel: Call Trace:
-Dec 11 09:28:18 uefi-linux kernel: dump_stack+0x63/0x87
-Dec 11 09:28:18 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
-Dec 11 09:28:18 uefi-linux kernel: ? dev_printk+0x4d/0x50
-Dec 11 09:28:18 uefi-linux kernel: enable_slot+0x140/0x2f0
-Dec 11 09:28:18 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
-Dec 11 09:28:18 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:18 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
-Dec 11 09:28:18 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
-Dec 11 09:28:18 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
-Dec 11 09:28:18 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
-Dec 11 09:28:18 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
-Dec 11 09:28:18 uefi-linux kernel: process_one_work+0x165/0x410
-Dec 11 09:28:18 uefi-linux kernel: worker_thread+0x137/0x4c0
-Dec 11 09:28:18 uefi-linux kernel: kthread+0x101/0x140
-Dec 11 09:28:18 uefi-linux kernel: ? rescuer_thread+0x380/0x380
-Dec 11 09:28:18 uefi-linux kernel: ? kthread_park+0x90/0x90
-Dec 11 09:28:18 uefi-linux kernel: ret_from_fork+0x2c/0x40
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:18 uefi-linux kernel: sleep
-Dec 11 09:28:18 uefi-linux kernel: CPU: 16 PID: 502 Comm: kworker/u40:1 Not 
-tainted 4.11.0-rc3+ #11
-Dec 11 09:28:18 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
-PIIX, 1996), BIOS 0.0.0 02/06/2015
-Dec 11 09:28:18 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
-Dec 11 09:28:18 uefi-linux kernel: Call Trace:
-Dec 11 09:28:18 uefi-linux kernel: dump_stack+0x63/0x87
-Dec 11 09:28:18 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
-Dec 11 09:28:18 uefi-linux kernel: ? dev_printk+0x4d/0x50
-Dec 11 09:28:18 uefi-linux kernel: enable_slot+0x140/0x2f0
-Dec 11 09:28:18 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
-Dec 11 09:28:18 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:18 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
-Dec 11 09:28:18 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
-Dec 11 09:28:18 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
-Dec 11 09:28:18 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
-Dec 11 09:28:18 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
-Dec 11 09:28:18 uefi-linux kernel: process_one_work+0x165/0x410
-Dec 11 09:28:18 uefi-linux kernel: worker_thread+0x137/0x4c0
-Dec 11 09:28:18 uefi-linux kernel: kthread+0x101/0x140
-Dec 11 09:28:18 uefi-linux kernel: ? rescuer_thread+0x380/0x380
-Dec 11 09:28:18 uefi-linux kernel: ? kthread_park+0x90/0x90
-Dec 11 09:28:18 uefi-linux kernel: ret_from_fork+0x2c/0x40
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:19 uefi-linux kernel: sleep
-Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
-tainted 4.11.0-rc3+ #11
-Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
-PIIX, 1996), BIOS 0.0.0 02/06/2015
-Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
-Dec 11 09:28:19 uefi-linux kernel: Call Trace:
-Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
-Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
-Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
-Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
-Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
-Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
-Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
-Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
-Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
-Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
-Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
-Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
-Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
-Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
-Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:19 uefi-linux kernel: sleep
-Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
-tainted 4.11.0-rc3+ #11
-Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
-PIIX, 1996), BIOS 0.0.0 02/06/2015
-Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
-Dec 11 09:28:19 uefi-linux kernel: Call Trace:
-Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
-Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
-Dec 11 09:28:19 uefi-linux kernel: ? pci_conf1_read+0xba/0x100
-Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0xe9/0x960
-Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
-Dec 11 09:28:19 uefi-linux kernel: ? pcibios_allocate_rom_resources+0x45/0x80
-Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
-Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
-Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
-Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
-Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
-Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
-Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
-Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
-Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
-Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
-Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
-Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
-Dec 11 09:28:19 uefi-linux kernel: sleep
-Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
-tainted 4.11.0-rc3+ #11
-Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
-PIIX, 1996), BIOS 0.0.0 02/06/2015
-Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
-Dec 11 09:28:19 uefi-linux kernel: Call Trace:
-Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
-Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
-Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
-Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
-Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
-Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
-Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
-Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
-Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
-Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
-Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
-Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
-Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
-Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
-Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
-Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 lost sync at byte 1
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
-isa0060/serio1/input0 - driver resynced.
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
-0xf000-0xffff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2800000-0xc29fffff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
-0xc2b00000-0xc2cfffff 64bit pref]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
-0xe000-0xefff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2600000-0xc27fffff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
-0xc2d00000-0xc2efffff 64bit pref]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
-0xd000-0xdfff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2400000-0xc25fffff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
-0xc2f00000-0xc30fffff 64bit pref]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
-0xc000-0xcfff]
-Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
-0xc2000000-0xc21fffff]
-
->
->
->
-> >
->
-> >
->
-> >
->
-> > >
->
-> > >
->
-> > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
->
-> > >
->
-> > > index b2e50c3..84b405d 100644
->
-> > >
->
-> > > --- a/hw/pci/pci_bridge.c
->
-> > >
->
-> > > +++ b/hw/pci/pci_bridge.c
->
-> > >
->
-> > > @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
->
-> > >
->
-> > >      pci_default_write_config(d, address, val, len);
->
-> > >
->
-> > > -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
-> > >
->
-> > > +    if ( (val != 0xffffffff) &&
->
-> > >
->
-> > > +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
-> > >
->
-> > >          /* io base/limit */
->
-> > >
->
-> > >          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-> > >
->
-> > > @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
->
-> > >
->
-> > >          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-> > >
->
-> > >          /* vga enable */
->
-> > >
->
-> > > -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
-> > >
->
-> > > +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
->
-> > >
->
-> > >          pci_bridge_update_mappings(s);
->
-> > >
->
-> > >      }
->
-> > >
->
-> > >
->
-> > >
->
-> > > Thinks,
->
-> > >
->
-> > > Xu
->
-> > >
-
-On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
->
-On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > > Hi all,
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > In our test, we configured VM with several pci-bridges and a
->
-> > > > virtio-net nic been attached with bus 4,
->
-> > > >
->
-> > > > After VM is startup, We ping this nic from host to judge if it is
->
-> > > > working normally. Then, we hot add pci devices to this VM with bus 0.
->
-> > > >
->
-> > > > We  found the virtio-net NIC in bus 4 is not working (can not
->
-> > > > connect) occasionally, as it kick virtio backend failure with error
->
-> > > > below:
->
-> > > >
->
-> > > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > memory-region: pci_bridge_pci
->
-> > > >
->
-> > > >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
->
-> > > >
->
-> > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
-> > > >
->
-> > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > > virtio-pci-common
->
-> > > >
->
-> > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > > virtio-pci-isr
->
-> > > >
->
-> > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > > virtio-pci-device
->
-> > > >
->
-> > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > > virtio-pci-notify  <- io mem unassigned
->
-> > > >
->
-> > > >       …
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > We caught an exceptional address changing while this problem
->
-> > > > happened, show as
->
-> > > > follow:
->
-> > > >
->
-> > > > Before pci_bridge_update_mappings：
->
-> > > >
->
-> > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fc000000-00000000fc1fffff
->
-> > > >
->
-> > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fc200000-00000000fc3fffff
->
-> > > >
->
-> > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fc400000-00000000fc5fffff
->
-> > > >
->
-> > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fc600000-00000000fc7fffff
->
-> > > >
->
-> > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fc800000-00000000fc9fffff
->
-> > > > <- correct Adress Spce
->
-> > > >
->
-> > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fca00000-00000000fcbfffff
->
-> > > >
->
-> > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fcc00000-00000000fcdfffff
->
-> > > >
->
-> > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > 00000000fce00000-00000000fcffffff
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > After pci_bridge_update_mappings：
->
-> > > >
->
-> > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
->
-> > > >
->
-> > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
->
-> > > >
->
-> > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
->
-> > > >
->
-> > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
->
-> > > >
->
-> > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
->
-> > > >
->
-> > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
->
-> > > >
->
-> > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
->
-> > > >
->
-> > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> > > > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
->
-> > > >
->
-> > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-> pci_bridge_pref_mem
->
-> > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
->
-> > > > Adress
->
-> > > Space
->
-> > >
->
-> > > This one is empty though right?
->
-> > >
->
-> > > >
->
-> > > >
->
-> > > > We have figured out why this address becomes this value,
->
-> > > > according to pci spec,  pci driver can get BAR address size by
->
-> > > > writing 0xffffffff to
->
-> > > >
->
-> > > > the pci register firstly, and then read back the value from this
->
-> > > > register.
->
-> > >
->
-> > >
->
-> > > OK however as you show below the BAR being sized is the BAR if a
->
-> > > bridge. Are you then adding a bridge device by hotplug?
->
-> >
->
-> > No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> > interesting phenomenon is If I hot plug the device to other bus, this
->
-> > doesn't
->
-> happened.
->
-> >
->
-> > >
->
-> > >
->
-> > > > We didn't handle this value  specially while process pci write in
->
-> > > > qemu, the function call stack is:
->
-> > > >
->
-> > > > Pci_bridge_dev_write_config
->
-> > > >
->
-> > > > -> pci_bridge_write_config
->
-> > > >
->
-> > > > -> pci_default_write_config (we update the config[address] value
->
-> > > > -> here to
->
-> > > > fffffffffc800000, which should be 0xfc800000 )
->
-> > > >
->
-> > > > -> pci_bridge_update_mappings
->
-> > > >
->
-> > > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > > >
->
-> > > > -> pci_bridge_region_init
->
-> > > >
->
-> > > >                                                                 ->
->
-> > > > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
->
-> > > > value
->
-> > > > fffffffffc800000)
->
-> > > >
->
-> > > >                                                 ->
->
-> > > > memory_region_transaction_commit
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > So, as we can see, we use the wrong base address in qemu to update
->
-> > > > the memory regions, though, we update the base address to
->
-> > > >
->
-> > > > The correct value after pci driver in VM write the original value
->
-> > > > back, the virtio NIC in bus 4 may still sends net packets
->
-> > > > concurrently with
->
-> > > >
->
-> > > > The wrong memory region address.
->
-> > > >
->
-> > > >
->
-> > > >
->
-> > > > We have tried to skip the memory region update action in qemu
->
-> > > > while detect pci write with 0xffffffff value, and it does work,
->
-> > > > but
->
-> > > >
->
-> > > > This seems to be not gently.
->
-> > >
->
-> > > For sure. But I'm still puzzled as to why does Linux try to size the
->
-> > > BAR of the bridge while a device behind it is used.
->
-> > >
->
-> > > Can you pls post your QEMU command line?
->
-> >
->
-> > My QEMU command line:
->
-> > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
->
-> > -object
->
-> > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-
->
-> > Linux/master-key.aes -machine
->
-> > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
->
-> > 20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024
->
-> > -numa node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> > node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> > node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
->
-> > -chardev
->
-> > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/moni
->
-> > tor.sock,server,nowait -mon
->
-> > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
->
-> > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on
->
-> > -device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-v
->
-> > irtio-disk0,cache=none -device
->
-> > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id
->
-> > =virtio-disk0,bootindex=1 -drive
->
-> > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
->
-> > tap,fd=35,id=hostnet0 -device
->
-> > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4
->
-> > ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> > isa-serial,chardev=charserial0,id=serial0 -device
->
-> > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
->
-> >
->
-> > I am also very curious about this issue, in the linux kernel code, maybe
->
-> > double
->
-> check in function pci_bridge_check_ranges triggered this problem.
->
->
->
-> If you can get the stacktrace in Linux when it tries to write this fffff
->
-> value, that
->
-> would be quite helpful.
->
->
->
->
-After I add mdelay(100) in function pci_bridge_check_ranges, this phenomenon
->
-is
->
-easier to reproduce, below is my modify in kernel:
->
-diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
->
-index cb389277..86e232d 100644
->
---- a/drivers/pci/setup-bus.c
->
-+++ b/drivers/pci/setup-bus.c
->
-@@ -27,7 +27,7 @@
->
-#include <linux/slab.h>
->
-#include <linux/acpi.h>
->
-#include "pci.h"
->
--
->
-+#include <linux/delay.h>
->
-unsigned int pci_flags;
->
->
-struct pci_dev_resource {
->
-@@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
->
-pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-0xffffffff);
->
-pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
->
-+               mdelay(100);
->
-+               printk(KERN_ERR "sleep\n");
->
-+                dump_stack();
->
-if (!tmp)
->
-b_res[2].flags &= ~IORESOURCE_MEM_64;
->
-pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-OK!
-I just sent a Linux patch that should help.
-I would appreciate it if you will give it a try
-and if that helps reply to it with
-a Tested-by: tag.
-
--- 
-MST
-
-On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
->
-> On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > > > Hi all,
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > In our test, we configured VM with several pci-bridges and a
->
-> > > > > virtio-net nic been attached with bus 4,
->
-> > > > >
->
-> > > > > After VM is startup, We ping this nic from host to judge if it
->
-> > > > > is working normally. Then, we hot add pci devices to this VM with
->
-> > > > > bus
->
-0.
->
-> > > > >
->
-> > > > > We  found the virtio-net NIC in bus 4 is not working (can not
->
-> > > > > connect) occasionally, as it kick virtio backend failure with error
->
-> > > > > below:
->
-> > > > >
->
-> > > > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > memory-region: pci_bridge_pci
->
-> > > > >
->
-> > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
->
-> > > > > pci_bridge_pci
->
-> > > > >
->
-> > > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
-> > > > >
->
-> > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > > > virtio-pci-common
->
-> > > > >
->
-> > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > > > virtio-pci-isr
->
-> > > > >
->
-> > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > > > virtio-pci-device
->
-> > > > >
->
-> > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > > > virtio-pci-notify  <- io mem unassigned
->
-> > > > >
->
-> > > > >       …
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > We caught an exceptional address changing while this problem
->
-> > > > > happened, show as
->
-> > > > > follow:
->
-> > > > >
->
-> > > > > Before pci_bridge_update_mappings：
->
-> > > > >
->
-> > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fc000000-00000000fc1fffff
->
-> > > > >
->
-> > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fc200000-00000000fc3fffff
->
-> > > > >
->
-> > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fc400000-00000000fc5fffff
->
-> > > > >
->
-> > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fc600000-00000000fc7fffff
->
-> > > > >
->
-> > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fc800000-00000000fc9fffff
->
-> > > > > <- correct Adress Spce
->
-> > > > >
->
-> > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fca00000-00000000fcbfffff
->
-> > > > >
->
-> > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fcc00000-00000000fcdfffff
->
-> > > > >
->
-> > > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > 00000000fce00000-00000000fcffffff
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > After pci_bridge_update_mappings：
->
-> > > > >
->
-> > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fda00000-00000000fdbfffff
->
-> > > > >
->
-> > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fdc00000-00000000fddfffff
->
-> > > > >
->
-> > > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fde00000-00000000fdffffff
->
-> > > > >
->
-> > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fe000000-00000000fe1fffff
->
-> > > > >
->
-> > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fe200000-00000000fe3fffff
->
-> > > > >
->
-> > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fe400000-00000000fe5fffff
->
-> > > > >
->
-> > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fe600000-00000000fe7fffff
->
-> > > > >
->
-> > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > 00000000fe800000-00000000fe9fffff
->
-> > > > >
->
-> > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-> > pci_bridge_pref_mem
->
-> > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
->
-Adress
->
-> > > > Space
->
-> > > >
->
-> > > > This one is empty though right?
->
-> > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > We have figured out why this address becomes this value,
->
-> > > > > according to pci spec,  pci driver can get BAR address size by
->
-> > > > > writing 0xffffffff to
->
-> > > > >
->
-> > > > > the pci register firstly, and then read back the value from this
->
-> > > > > register.
->
-> > > >
->
-> > > >
->
-> > > > OK however as you show below the BAR being sized is the BAR if a
->
-> > > > bridge. Are you then adding a bridge device by hotplug?
->
-> > >
->
-> > > No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> > > interesting phenomenon is If I hot plug the device to other bus,
->
-> > > this doesn't
->
-> > happened.
->
-> > >
->
-> > > >
->
-> > > >
->
-> > > > > We didn't handle this value  specially while process pci write
->
-> > > > > in qemu, the function call stack is:
->
-> > > > >
->
-> > > > > Pci_bridge_dev_write_config
->
-> > > > >
->
-> > > > > -> pci_bridge_write_config
->
-> > > > >
->
-> > > > > -> pci_default_write_config (we update the config[address]
->
-> > > > > -> value here to
->
-> > > > > fffffffffc800000, which should be 0xfc800000 )
->
-> > > > >
->
-> > > > > -> pci_bridge_update_mappings
->
-> > > > >
->
-> > > > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > > > >
->
-> > > > > -> pci_bridge_region_init
->
-> > > > >
->
-> > > > >
->
-> > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use the
->
-> > > > > wrong value
->
-> > > > > fffffffffc800000)
->
-> > > > >
->
-> > > > >                                                 ->
->
-> > > > > memory_region_transaction_commit
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > So, as we can see, we use the wrong base address in qemu to
->
-> > > > > update the memory regions, though, we update the base address
->
-> > > > > to
->
-> > > > >
->
-> > > > > The correct value after pci driver in VM write the original
->
-> > > > > value back, the virtio NIC in bus 4 may still sends net
->
-> > > > > packets concurrently with
->
-> > > > >
->
-> > > > > The wrong memory region address.
->
-> > > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > We have tried to skip the memory region update action in qemu
->
-> > > > > while detect pci write with 0xffffffff value, and it does
->
-> > > > > work, but
->
-> > > > >
->
-> > > > > This seems to be not gently.
->
-> > > >
->
-> > > > For sure. But I'm still puzzled as to why does Linux try to size
->
-> > > > the BAR of the bridge while a device behind it is used.
->
-> > > >
->
-> > > > Can you pls post your QEMU command line?
->
-> > >
->
-> > > My QEMU command line:
->
-> > > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
->
-> > > -object
->
-> > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-
->
-> > > 194-
->
-> > > Linux/master-key.aes -machine
->
-> > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
->
-> > > 20,sockets=20,cores=1,threads=1 -numa
->
-> > > node,nodeid=0,cpus=0-4,mem=1024 -numa
->
-> > > node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> > > node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
->
-> > > -chardev
->
-> > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/
->
-> > > moni
->
-> > > tor.sock,server,nowait -mon
->
-> > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
->
-> > > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot
->
-> > > strict=on -device
->
-> > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=dri
->
-> > > ve-v
->
-> > > irtio-disk0,cache=none -device
->
-> > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk
->
-> > > 0,id
->
-> > > =virtio-disk0,bootindex=1 -drive
->
-> > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
->
-> > > tap,fd=35,id=hostnet0 -device
->
-> > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=p
->
-> > > ci.4
->
-> > > ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> > > isa-serial,chardev=charserial0,id=serial0 -device
->
-> > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
->
-> > > timestamp=on
->
-> > >
->
-> > > I am also very curious about this issue, in the linux kernel code,
->
-> > > maybe double
->
-> > check in function pci_bridge_check_ranges triggered this problem.
->
-> >
->
-> > If you can get the stacktrace in Linux when it tries to write this
->
-> > fffff value, that would be quite helpful.
->
-> >
->
->
->
-> After I add mdelay(100) in function pci_bridge_check_ranges, this
->
-> phenomenon is easier to reproduce, below is my modify in kernel:
->
-> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index
->
-> cb389277..86e232d 100644
->
-> --- a/drivers/pci/setup-bus.c
->
-> +++ b/drivers/pci/setup-bus.c
->
-> @@ -27,7 +27,7 @@
->
->  #include <linux/slab.h>
->
->  #include <linux/acpi.h>
->
->  #include "pci.h"
->
-> -
->
-> +#include <linux/delay.h>
->
->  unsigned int pci_flags;
->
->
->
->  struct pci_dev_resource {
->
-> @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus
->
-*bus)
->
->                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
->                                                0xffffffff);
->
->                 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> &tmp);
->
-> +               mdelay(100);
->
-> +               printk(KERN_ERR "sleep\n");
->
-> +                dump_stack();
->
->                 if (!tmp)
->
->                         b_res[2].flags &= ~IORESOURCE_MEM_64;
->
->                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
->
->
->
-OK!
->
-I just sent a Linux patch that should help.
->
-I would appreciate it if you will give it a try and if that helps reply to it
->
-with a
->
-Tested-by: tag.
->
-I tested this patch and it works fine on my machine.
-
-But I have another question, if we only fix this problem in the kernel, the 
-Linux
-version that has been released does not work well on the virtualization 
-platform. 
-Is there a way to fix this problem in the backend?
-
->
---
->
-MST
-
-On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
->
-On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
->
-> > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > > > > Hi all,
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > In our test, we configured VM with several pci-bridges and a
->
-> > > > > > virtio-net nic been attached with bus 4,
->
-> > > > > >
->
-> > > > > > After VM is startup, We ping this nic from host to judge if it
->
-> > > > > > is working normally. Then, we hot add pci devices to this VM with
->
-> > > > > > bus
->
-> 0.
->
-> > > > > >
->
-> > > > > > We  found the virtio-net NIC in bus 4 is not working (can not
->
-> > > > > > connect) occasionally, as it kick virtio backend failure with
->
-> > > > > > error below:
->
-> > > > > >
->
-> > > > > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > memory-region: pci_bridge_pci
->
-> > > > > >
->
-> > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
->
-> > > > > > pci_bridge_pci
->
-> > > > > >
->
-> > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
->
-> > > > > >
->
-> > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > > > > virtio-pci-common
->
-> > > > > >
->
-> > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > > > > virtio-pci-isr
->
-> > > > > >
->
-> > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > > > > virtio-pci-device
->
-> > > > > >
->
-> > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > > > > virtio-pci-notify  <- io mem unassigned
->
-> > > > > >
->
-> > > > > >       …
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > We caught an exceptional address changing while this problem
->
-> > > > > > happened, show as
->
-> > > > > > follow:
->
-> > > > > >
->
-> > > > > > Before pci_bridge_update_mappings：
->
-> > > > > >
->
-> > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fc000000-00000000fc1fffff
->
-> > > > > >
->
-> > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fc200000-00000000fc3fffff
->
-> > > > > >
->
-> > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fc400000-00000000fc5fffff
->
-> > > > > >
->
-> > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fc600000-00000000fc7fffff
->
-> > > > > >
->
-> > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fc800000-00000000fc9fffff
->
-> > > > > > <- correct Adress Spce
->
-> > > > > >
->
-> > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fca00000-00000000fcbfffff
->
-> > > > > >
->
-> > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fcc00000-00000000fcdfffff
->
-> > > > > >
->
-> > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > 00000000fce00000-00000000fcffffff
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > After pci_bridge_update_mappings：
->
-> > > > > >
->
-> > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fda00000-00000000fdbfffff
->
-> > > > > >
->
-> > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fdc00000-00000000fddfffff
->
-> > > > > >
->
-> > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fde00000-00000000fdffffff
->
-> > > > > >
->
-> > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fe000000-00000000fe1fffff
->
-> > > > > >
->
-> > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fe200000-00000000fe3fffff
->
-> > > > > >
->
-> > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fe400000-00000000fe5fffff
->
-> > > > > >
->
-> > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fe600000-00000000fe7fffff
->
-> > > > > >
->
-> > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
->
-> > > > > > pci_bridge_mem @pci_bridge_pci
->
-> > > > > > 00000000fe800000-00000000fe9fffff
->
-> > > > > >
->
-> > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
->
-> > > pci_bridge_pref_mem
->
-> > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
->
-> Adress
->
-> > > > > Space
->
-> > > > >
->
-> > > > > This one is empty though right?
->
-> > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > We have figured out why this address becomes this value,
->
-> > > > > > according to pci spec,  pci driver can get BAR address size by
->
-> > > > > > writing 0xffffffff to
->
-> > > > > >
->
-> > > > > > the pci register firstly, and then read back the value from this
->
-> > > > > > register.
->
-> > > > >
->
-> > > > >
->
-> > > > > OK however as you show below the BAR being sized is the BAR if a
->
-> > > > > bridge. Are you then adding a bridge device by hotplug?
->
-> > > >
->
-> > > > No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> > > > interesting phenomenon is If I hot plug the device to other bus,
->
-> > > > this doesn't
->
-> > > happened.
->
-> > > >
->
-> > > > >
->
-> > > > >
->
-> > > > > > We didn't handle this value  specially while process pci write
->
-> > > > > > in qemu, the function call stack is:
->
-> > > > > >
->
-> > > > > > Pci_bridge_dev_write_config
->
-> > > > > >
->
-> > > > > > -> pci_bridge_write_config
->
-> > > > > >
->
-> > > > > > -> pci_default_write_config (we update the config[address]
->
-> > > > > > -> value here to
->
-> > > > > > fffffffffc800000, which should be 0xfc800000 )
->
-> > > > > >
->
-> > > > > > -> pci_bridge_update_mappings
->
-> > > > > >
->
-> > > > > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > > > > >
->
-> > > > > > -> pci_bridge_region_init
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use the
->
-> > > > > > wrong value
->
-> > > > > > fffffffffc800000)
->
-> > > > > >
->
-> > > > > >                                                 ->
->
-> > > > > > memory_region_transaction_commit
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > So, as we can see, we use the wrong base address in qemu to
->
-> > > > > > update the memory regions, though, we update the base address
->
-> > > > > > to
->
-> > > > > >
->
-> > > > > > The correct value after pci driver in VM write the original
->
-> > > > > > value back, the virtio NIC in bus 4 may still sends net
->
-> > > > > > packets concurrently with
->
-> > > > > >
->
-> > > > > > The wrong memory region address.
->
-> > > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > We have tried to skip the memory region update action in qemu
->
-> > > > > > while detect pci write with 0xffffffff value, and it does
->
-> > > > > > work, but
->
-> > > > > >
->
-> > > > > > This seems to be not gently.
->
-> > > > >
->
-> > > > > For sure. But I'm still puzzled as to why does Linux try to size
->
-> > > > > the BAR of the bridge while a device behind it is used.
->
-> > > > >
->
-> > > > > Can you pls post your QEMU command line?
->
-> > > >
->
-> > > > My QEMU command line:
->
-> > > > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
->
-> > > > -object
->
-> > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-
->
-> > > > 194-
->
-> > > > Linux/master-key.aes -machine
->
-> > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
->
-> > > > 20,sockets=20,cores=1,threads=1 -numa
->
-> > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
->
-> > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
->
-> > > > -chardev
->
-> > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/
->
-> > > > moni
->
-> > > > tor.sock,server,nowait -mon
->
-> > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
->
-> > > > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot
->
-> > > > strict=on -device
->
-> > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=dri
->
-> > > > ve-v
->
-> > > > irtio-disk0,cache=none -device
->
-> > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk
->
-> > > > 0,id
->
-> > > > =virtio-disk0,bootindex=1 -drive
->
-> > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
->
-> > > > tap,fd=35,id=hostnet0 -device
->
-> > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=p
->
-> > > > ci.4
->
-> > > > ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> > > > isa-serial,chardev=charserial0,id=serial0 -device
->
-> > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
->
-> > > > timestamp=on
->
-> > > >
->
-> > > > I am also very curious about this issue, in the linux kernel code,
->
-> > > > maybe double
->
-> > > check in function pci_bridge_check_ranges triggered this problem.
->
-> > >
->
-> > > If you can get the stacktrace in Linux when it tries to write this
->
-> > > fffff value, that would be quite helpful.
->
-> > >
->
-> >
->
-> > After I add mdelay(100) in function pci_bridge_check_ranges, this
->
-> > phenomenon is easier to reproduce, below is my modify in kernel:
->
-> > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index
->
-> > cb389277..86e232d 100644
->
-> > --- a/drivers/pci/setup-bus.c
->
-> > +++ b/drivers/pci/setup-bus.c
->
-> > @@ -27,7 +27,7 @@
->
-> >  #include <linux/slab.h>
->
-> >  #include <linux/acpi.h>
->
-> >  #include "pci.h"
->
-> > -
->
-> > +#include <linux/delay.h>
->
-> >  unsigned int pci_flags;
->
-> >
->
-> >  struct pci_dev_resource {
->
-> > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus
->
-> *bus)
->
-> >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> >                                                0xffffffff);
->
-> >                 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> > &tmp);
->
-> > +               mdelay(100);
->
-> > +               printk(KERN_ERR "sleep\n");
->
-> > +                dump_stack();
->
-> >                 if (!tmp)
->
-> >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
->
-> >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> >
->
->
->
-> OK!
->
-> I just sent a Linux patch that should help.
->
-> I would appreciate it if you will give it a try and if that helps reply to
->
-> it with a
->
-> Tested-by: tag.
->
->
->
->
-I tested this patch and it works fine on my machine.
->
->
-But I have another question, if we only fix this problem in the kernel, the
->
-Linux
->
-version that has been released does not work well on the virtualization
->
-platform.
->
-Is there a way to fix this problem in the backend?
-There could we a way to work around this.
-Does below help?
-
-diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
-index 236a20eaa8..7834cac4b0 100644
---- a/hw/i386/acpi-build.c
-+++ b/hw/i386/acpi-build.c
-@@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, 
-PCIBus *bus,
- 
-         aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
-         aml_append(method,
--            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check */)
-+            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device Check 
-Light */)
-         );
-         aml_append(method,
-             aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request */)
-
->
-On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
->
-> On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
->
-> > > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > > > > > Hi all,
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > In our test, we configured VM with several pci-bridges and
->
-> > > > > > > a virtio-net nic been attached with bus 4,
->
-> > > > > > >
->
-> > > > > > > After VM is startup, We ping this nic from host to judge
->
-> > > > > > > if it is working normally. Then, we hot add pci devices to
->
-> > > > > > > this VM with bus
->
-> > 0.
->
-> > > > > > >
->
-> > > > > > > We  found the virtio-net NIC in bus 4 is not working (can
->
-> > > > > > > not
->
-> > > > > > > connect) occasionally, as it kick virtio backend failure with
->
-> > > > > > > error
->
-below:
->
-> > > > > > >
->
-> > > > > > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > memory-region: pci_bridge_pci
->
-> > > > > > >
->
-> > > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
->
-> > > > > > > pci_bridge_pci
->
-> > > > > > >
->
-> > > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW):
->
-> > > > > > > virtio-pci
->
-> > > > > > >
->
-> > > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > > > > > virtio-pci-common
->
-> > > > > > >
->
-> > > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > > > > > virtio-pci-isr
->
-> > > > > > >
->
-> > > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > > > > > virtio-pci-device
->
-> > > > > > >
->
-> > > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > > > > > virtio-pci-notify  <- io mem unassigned
->
-> > > > > > >
->
-> > > > > > >       …
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > We caught an exceptional address changing while this
->
-> > > > > > > problem happened, show as
->
-> > > > > > > follow:
->
-> > > > > > >
->
-> > > > > > > Before pci_bridge_update_mappings：
->
-> > > > > > >
->
-> > > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fc000000-00000000fc1fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fc200000-00000000fc3fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fc400000-00000000fc5fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fc600000-00000000fc7fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fc800000-00000000fc9fffff
->
-> > > > > > > <- correct Adress Spce
->
-> > > > > > >
->
-> > > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fca00000-00000000fcbfffff
->
-> > > > > > >
->
-> > > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fcc00000-00000000fcdfffff
->
-> > > > > > >
->
-> > > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > 00000000fce00000-00000000fcffffff
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > After pci_bridge_update_mappings：
->
-> > > > > > >
->
-> > > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fda00000-00000000fdbfffff
->
-> > > > > > >
->
-> > > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fdc00000-00000000fddfffff
->
-> > > > > > >
->
-> > > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fde00000-00000000fdffffff
->
-> > > > > > >
->
-> > > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fe000000-00000000fe1fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fe200000-00000000fe3fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fe400000-00000000fe5fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fe600000-00000000fe7fffff
->
-> > > > > > >
->
-> > > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW):
->
-> > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > 00000000fe800000-00000000fe9fffff
->
-> > > > > > >
->
-> > > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW):
->
-> > > > > > > alias
->
-> > > > pci_bridge_pref_mem
->
-> > > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <-
->
-> > > > > > > Exceptional
->
-> > Adress
->
-> > > > > > Space
->
-> > > > > >
->
-> > > > > > This one is empty though right?
->
-> > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > We have figured out why this address becomes this value,
->
-> > > > > > > according to pci spec,  pci driver can get BAR address
->
-> > > > > > > size by writing 0xffffffff to
->
-> > > > > > >
->
-> > > > > > > the pci register firstly, and then read back the value from this
->
-register.
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > OK however as you show below the BAR being sized is the BAR
->
-> > > > > > if a bridge. Are you then adding a bridge device by hotplug?
->
-> > > > >
->
-> > > > > No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> > > > > interesting phenomenon is If I hot plug the device to other
->
-> > > > > bus, this doesn't
->
-> > > > happened.
->
-> > > > >
->
-> > > > > >
->
-> > > > > >
->
-> > > > > > > We didn't handle this value  specially while process pci
->
-> > > > > > > write in qemu, the function call stack is:
->
-> > > > > > >
->
-> > > > > > > Pci_bridge_dev_write_config
->
-> > > > > > >
->
-> > > > > > > -> pci_bridge_write_config
->
-> > > > > > >
->
-> > > > > > > -> pci_default_write_config (we update the config[address]
->
-> > > > > > > -> value here to
->
-> > > > > > > fffffffffc800000, which should be 0xfc800000 )
->
-> > > > > > >
->
-> > > > > > > -> pci_bridge_update_mappings
->
-> > > > > > >
->
-> > > > > > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > > > > > >
->
-> > > > > > > -> pci_bridge_region_init
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use
->
-> > > > > > > -> the
->
-> > > > > > > wrong value
->
-> > > > > > > fffffffffc800000)
->
-> > > > > > >
->
-> > > > > > >                                                 ->
->
-> > > > > > > memory_region_transaction_commit
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > So, as we can see, we use the wrong base address in qemu
->
-> > > > > > > to update the memory regions, though, we update the base
->
-> > > > > > > address to
->
-> > > > > > >
->
-> > > > > > > The correct value after pci driver in VM write the
->
-> > > > > > > original value back, the virtio NIC in bus 4 may still
->
-> > > > > > > sends net packets concurrently with
->
-> > > > > > >
->
-> > > > > > > The wrong memory region address.
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > We have tried to skip the memory region update action in
->
-> > > > > > > qemu while detect pci write with 0xffffffff value, and it
->
-> > > > > > > does work, but
->
-> > > > > > >
->
-> > > > > > > This seems to be not gently.
->
-> > > > > >
->
-> > > > > > For sure. But I'm still puzzled as to why does Linux try to
->
-> > > > > > size the BAR of the bridge while a device behind it is used.
->
-> > > > > >
->
-> > > > > > Can you pls post your QEMU command line?
->
-> > > > >
->
-> > > > > My QEMU command line:
->
-> > > > > /root/xyd/qemu-system-x86_64 -name
->
-> > > > > guest=Linux,debug-threads=on -S -object
->
-> > > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/dom
->
-> > > > > ain-
->
-> > > > > 194-
->
-> > > > > Linux/master-key.aes -machine
->
-> > > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> > > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> > > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off
->
-> > > > > -smp
->
-> > > > > 20,sockets=20,cores=1,threads=1 -numa
->
-> > > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
->
-> > > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> > > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> > > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> > > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config
->
-> > > > > -nodefaults -chardev
->
-> > > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Li
->
-> > > > > nux/
->
-> > > > > moni
->
-> > > > > tor.sock,server,nowait -mon
->
-> > > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc
->
-> > > > > -no-hpet -global kvm-pit.lost_tick_policy=delay -no-shutdown
->
-> > > > > -boot strict=on -device
->
-> > > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> > > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> > > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> > > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> > > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> > > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> > > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> > > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> > > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> > > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> > > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> > > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> > > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id
->
-> > > > > =dri
->
-> > > > > ve-v
->
-> > > > > irtio-disk0,cache=none -device
->
-> > > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-
->
-> > > > > disk
->
-> > > > > 0,id
->
-> > > > > =virtio-disk0,bootindex=1 -drive
->
-> > > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> > > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1
->
-> > > > > -netdev
->
-> > > > > tap,fd=35,id=hostnet0 -device
->
-> > > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,b
->
-> > > > > us=p
->
-> > > > > ci.4
->
-> > > > > ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> > > > > isa-serial,chardev=charserial0,id=serial0 -device
->
-> > > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> > > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
->
-> > > > > timestamp=on
->
-> > > > >
->
-> > > > > I am also very curious about this issue, in the linux kernel
->
-> > > > > code, maybe double
->
-> > > > check in function pci_bridge_check_ranges triggered this problem.
->
-> > > >
->
-> > > > If you can get the stacktrace in Linux when it tries to write
->
-> > > > this fffff value, that would be quite helpful.
->
-> > > >
->
-> > >
->
-> > > After I add mdelay(100) in function pci_bridge_check_ranges, this
->
-> > > phenomenon is easier to reproduce, below is my modify in kernel:
->
-> > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
->
-> > > index cb389277..86e232d 100644
->
-> > > --- a/drivers/pci/setup-bus.c
->
-> > > +++ b/drivers/pci/setup-bus.c
->
-> > > @@ -27,7 +27,7 @@
->
-> > >  #include <linux/slab.h>
->
-> > >  #include <linux/acpi.h>
->
-> > >  #include "pci.h"
->
-> > > -
->
-> > > +#include <linux/delay.h>
->
-> > >  unsigned int pci_flags;
->
-> > >
->
-> > >  struct pci_dev_resource {
->
-> > > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct
->
-> > > pci_bus
->
-> > *bus)
->
-> > >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> > >                                                0xffffffff);
->
-> > >                 pci_read_config_dword(bridge,
->
-> > > PCI_PREF_BASE_UPPER32, &tmp);
->
-> > > +               mdelay(100);
->
-> > > +               printk(KERN_ERR "sleep\n");
->
-> > > +                dump_stack();
->
-> > >                 if (!tmp)
->
-> > >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
->
-> > >                 pci_write_config_dword(bridge,
->
-> > > PCI_PREF_BASE_UPPER32,
->
-> > >
->
-> >
->
-> > OK!
->
-> > I just sent a Linux patch that should help.
->
-> > I would appreciate it if you will give it a try and if that helps
->
-> > reply to it with a
->
-> > Tested-by: tag.
->
-> >
->
->
->
-> I tested this patch and it works fine on my machine.
->
->
->
-> But I have another question, if we only fix this problem in the
->
-> kernel, the Linux version that has been released does not work well on the
->
-virtualization platform.
->
-> Is there a way to fix this problem in the backend?
->
->
-There could we a way to work around this.
->
-Does below help?
-I am sorry to tell you, I tested this patch and it doesn't work fine.
-
->
->
-diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-236a20eaa8..7834cac4b0 100644
->
---- a/hw/i386/acpi-build.c
->
-+++ b/hw/i386/acpi-build.c
->
-@@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-*parent_scope, PCIBus *bus,
->
->
-aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
->
-aml_append(method,
->
--            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
->
-*/)
->
-+            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
->
-+ Check Light */)
->
-);
->
-aml_append(method,
->
-aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
->
-*/)
-
-On Tue, Dec 11, 2018 at 03:51:09AM +0000, xuyandong wrote:
->
-> There could we a way to work around this.
->
-> Does below help?
->
->
-I am sorry to tell you, I tested this patch and it doesn't work fine.
-What happens?
-
->
->
->
-> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-> 236a20eaa8..7834cac4b0 100644
->
-> --- a/hw/i386/acpi-build.c
->
-> +++ b/hw/i386/acpi-build.c
->
-> @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-> *parent_scope, PCIBus *bus,
->
->
->
->          aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
->
->          aml_append(method,
->
-> -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
->
-> */)
->
-> +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
->
-> + Check Light */)
->
->          );
->
->          aml_append(method,
->
->              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
->
-> */)
-
-On Tue, Dec 11, 2018 at 03:51:09AM +0000, xuyandong wrote:
->
-> On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
->
-> > On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
->
-> > > > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
->
-> > > > > > > > Hi all,
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > In our test, we configured VM with several pci-bridges and
->
-> > > > > > > > a virtio-net nic been attached with bus 4,
->
-> > > > > > > >
->
-> > > > > > > > After VM is startup, We ping this nic from host to judge
->
-> > > > > > > > if it is working normally. Then, we hot add pci devices to
->
-> > > > > > > > this VM with bus
->
-> > > 0.
->
-> > > > > > > >
->
-> > > > > > > > We  found the virtio-net NIC in bus 4 is not working (can
->
-> > > > > > > > not
->
-> > > > > > > > connect) occasionally, as it kick virtio backend failure with
->
-> > > > > > > > error
->
-> below:
->
-> > > > > > > >
->
-> > > > > > > >     Unassigned mem write 00000000fc803004 = 0x1
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > memory-region: pci_bridge_pci
->
-> > > > > > > >
->
-> > > > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
->
-> > > > > > > > pci_bridge_pci
->
-> > > > > > > >
->
-> > > > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW):
->
-> > > > > > > > virtio-pci
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
->
-> > > > > > > > virtio-pci-common
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
->
-> > > > > > > > virtio-pci-isr
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
->
-> > > > > > > > virtio-pci-device
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
->
-> > > > > > > > virtio-pci-notify  <- io mem unassigned
->
-> > > > > > > >
->
-> > > > > > > >       …
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > We caught an exceptional address changing while this
->
-> > > > > > > > problem happened, show as
->
-> > > > > > > > follow:
->
-> > > > > > > >
->
-> > > > > > > > Before pci_bridge_update_mappings：
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fc000000-00000000fc1fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fc200000-00000000fc3fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fc400000-00000000fc5fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fc600000-00000000fc7fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fc800000-00000000fc9fffff
->
-> > > > > > > > <- correct Adress Spce
->
-> > > > > > > >
->
-> > > > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fca00000-00000000fcbfffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fcc00000-00000000fcdfffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fce00000-00000000fcffffff
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > After pci_bridge_update_mappings：
->
-> > > > > > > >
->
-> > > > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fda00000-00000000fdbfffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fdc00000-00000000fddfffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fde00000-00000000fdffffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fe000000-00000000fe1fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fe200000-00000000fe3fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fe400000-00000000fe5fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fe600000-00000000fe7fffff
->
-> > > > > > > >
->
-> > > > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW):
->
-> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
->
-> > > > > > > > 00000000fe800000-00000000fe9fffff
->
-> > > > > > > >
->
-> > > > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW):
->
-> > > > > > > > alias
->
-> > > > > pci_bridge_pref_mem
->
-> > > > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <-
->
-> > > > > > > > Exceptional
->
-> > > Adress
->
-> > > > > > > Space
->
-> > > > > > >
->
-> > > > > > > This one is empty though right?
->
-> > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > We have figured out why this address becomes this value,
->
-> > > > > > > > according to pci spec,  pci driver can get BAR address
->
-> > > > > > > > size by writing 0xffffffff to
->
-> > > > > > > >
->
-> > > > > > > > the pci register firstly, and then read back the value from
->
-> > > > > > > > this
->
-> register.
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > OK however as you show below the BAR being sized is the BAR
->
-> > > > > > > if a bridge. Are you then adding a bridge device by hotplug?
->
-> > > > > >
->
-> > > > > > No, I just simply hot plugged a VFIO device to Bus 0, another
->
-> > > > > > interesting phenomenon is If I hot plug the device to other
->
-> > > > > > bus, this doesn't
->
-> > > > > happened.
->
-> > > > > >
->
-> > > > > > >
->
-> > > > > > >
->
-> > > > > > > > We didn't handle this value  specially while process pci
->
-> > > > > > > > write in qemu, the function call stack is:
->
-> > > > > > > >
->
-> > > > > > > > Pci_bridge_dev_write_config
->
-> > > > > > > >
->
-> > > > > > > > -> pci_bridge_write_config
->
-> > > > > > > >
->
-> > > > > > > > -> pci_default_write_config (we update the config[address]
->
-> > > > > > > > -> value here to
->
-> > > > > > > > fffffffffc800000, which should be 0xfc800000 )
->
-> > > > > > > >
->
-> > > > > > > > -> pci_bridge_update_mappings
->
-> > > > > > > >
->
-> > > > > > > >                 ->pci_bridge_region_del(br, br->windows);
->
-> > > > > > > >
->
-> > > > > > > > -> pci_bridge_region_init
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use
->
-> > > > > > > > -> the
->
-> > > > > > > > wrong value
->
-> > > > > > > > fffffffffc800000)
->
-> > > > > > > >
->
-> > > > > > > >                                                 ->
->
-> > > > > > > > memory_region_transaction_commit
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > So, as we can see, we use the wrong base address in qemu
->
-> > > > > > > > to update the memory regions, though, we update the base
->
-> > > > > > > > address to
->
-> > > > > > > >
->
-> > > > > > > > The correct value after pci driver in VM write the
->
-> > > > > > > > original value back, the virtio NIC in bus 4 may still
->
-> > > > > > > > sends net packets concurrently with
->
-> > > > > > > >
->
-> > > > > > > > The wrong memory region address.
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > >
->
-> > > > > > > > We have tried to skip the memory region update action in
->
-> > > > > > > > qemu while detect pci write with 0xffffffff value, and it
->
-> > > > > > > > does work, but
->
-> > > > > > > >
->
-> > > > > > > > This seems to be not gently.
->
-> > > > > > >
->
-> > > > > > > For sure. But I'm still puzzled as to why does Linux try to
->
-> > > > > > > size the BAR of the bridge while a device behind it is used.
->
-> > > > > > >
->
-> > > > > > > Can you pls post your QEMU command line?
->
-> > > > > >
->
-> > > > > > My QEMU command line:
->
-> > > > > > /root/xyd/qemu-system-x86_64 -name
->
-> > > > > > guest=Linux,debug-threads=on -S -object
->
-> > > > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/dom
->
-> > > > > > ain-
->
-> > > > > > 194-
->
-> > > > > > Linux/master-key.aes -machine
->
-> > > > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
->
-> > > > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
->
-> > > > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off
->
-> > > > > > -smp
->
-> > > > > > 20,sockets=20,cores=1,threads=1 -numa
->
-> > > > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
->
-> > > > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
->
-> > > > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
->
-> > > > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
->
-> > > > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config
->
-> > > > > > -nodefaults -chardev
->
-> > > > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Li
->
-> > > > > > nux/
->
-> > > > > > moni
->
-> > > > > > tor.sock,server,nowait -mon
->
-> > > > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc
->
-> > > > > > -no-hpet -global kvm-pit.lost_tick_policy=delay -no-shutdown
->
-> > > > > > -boot strict=on -device
->
-> > > > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
->
-> > > > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
->
-> > > > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
->
-> > > > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
->
-> > > > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
->
-> > > > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
->
-> > > > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
->
-> > > > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
->
-> > > > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
->
-> > > > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
->
-> > > > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
->
-> > > > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
->
-> > > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
->
-> > > > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id
->
-> > > > > > =dri
->
-> > > > > > ve-v
->
-> > > > > > irtio-disk0,cache=none -device
->
-> > > > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-
->
-> > > > > > disk
->
-> > > > > > 0,id
->
-> > > > > > =virtio-disk0,bootindex=1 -drive
->
-> > > > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
->
-> > > > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1
->
-> > > > > > -netdev
->
-> > > > > > tap,fd=35,id=hostnet0 -device
->
-> > > > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,b
->
-> > > > > > us=p
->
-> > > > > > ci.4
->
-> > > > > > ,addr=0x1 -chardev pty,id=charserial0 -device
->
-> > > > > > isa-serial,chardev=charserial0,id=serial0 -device
->
-> > > > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
->
-> > > > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
->
-> > > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
->
-> > > > > > timestamp=on
->
-> > > > > >
->
-> > > > > > I am also very curious about this issue, in the linux kernel
->
-> > > > > > code, maybe double
->
-> > > > > check in function pci_bridge_check_ranges triggered this problem.
->
-> > > > >
->
-> > > > > If you can get the stacktrace in Linux when it tries to write
->
-> > > > > this fffff value, that would be quite helpful.
->
-> > > > >
->
-> > > >
->
-> > > > After I add mdelay(100) in function pci_bridge_check_ranges, this
->
-> > > > phenomenon is easier to reproduce, below is my modify in kernel:
->
-> > > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
->
-> > > > index cb389277..86e232d 100644
->
-> > > > --- a/drivers/pci/setup-bus.c
->
-> > > > +++ b/drivers/pci/setup-bus.c
->
-> > > > @@ -27,7 +27,7 @@
->
-> > > >  #include <linux/slab.h>
->
-> > > >  #include <linux/acpi.h>
->
-> > > >  #include "pci.h"
->
-> > > > -
->
-> > > > +#include <linux/delay.h>
->
-> > > >  unsigned int pci_flags;
->
-> > > >
->
-> > > >  struct pci_dev_resource {
->
-> > > > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct
->
-> > > > pci_bus
->
-> > > *bus)
->
-> > > >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
->
-> > > >                                                0xffffffff);
->
-> > > >                 pci_read_config_dword(bridge,
->
-> > > > PCI_PREF_BASE_UPPER32, &tmp);
->
-> > > > +               mdelay(100);
->
-> > > > +               printk(KERN_ERR "sleep\n");
->
-> > > > +                dump_stack();
->
-> > > >                 if (!tmp)
->
-> > > >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
->
-> > > >                 pci_write_config_dword(bridge,
->
-> > > > PCI_PREF_BASE_UPPER32,
->
-> > > >
->
-> > >
->
-> > > OK!
->
-> > > I just sent a Linux patch that should help.
->
-> > > I would appreciate it if you will give it a try and if that helps
->
-> > > reply to it with a
->
-> > > Tested-by: tag.
->
-> > >
->
-> >
->
-> > I tested this patch and it works fine on my machine.
->
-> >
->
-> > But I have another question, if we only fix this problem in the
->
-> > kernel, the Linux version that has been released does not work well on the
->
-> virtualization platform.
->
-> > Is there a way to fix this problem in the backend?
->
->
->
-> There could we a way to work around this.
->
-> Does below help?
->
->
-I am sorry to tell you, I tested this patch and it doesn't work fine.
->
->
->
->
-> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-> 236a20eaa8..7834cac4b0 100644
->
-> --- a/hw/i386/acpi-build.c
->
-> +++ b/hw/i386/acpi-build.c
->
-> @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-> *parent_scope, PCIBus *bus,
->
->
->
->          aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
->
->          aml_append(method,
->
-> -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
->
-> */)
->
-> +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
->
-> + Check Light */)
->
->          );
->
->          aml_append(method,
->
->              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
->
-> */)
-Oh I see, another bug:
-
-        case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
-                acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT 
-event\n");
-                /* TBD: Exactly what does 'light' mean? */
-                break;
-
-And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
-and friends all just ignore this event type.
-
-
-
--- 
-MST
-
->
-> > > > > > > > > Hi all,
->
-> > > > > > > > >
->
-> > > > > > > > >
->
-> > > > > > > > >
->
-> > > > > > > > > In our test, we configured VM with several pci-bridges
->
-> > > > > > > > > and a virtio-net nic been attached with bus 4,
->
-> > > > > > > > >
->
-> > > > > > > > > After VM is startup, We ping this nic from host to
->
-> > > > > > > > > judge if it is working normally. Then, we hot add pci
->
-> > > > > > > > > devices to this VM with bus
->
-> > > > 0.
->
-> > > > > > > > >
->
-> > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
->
-> > > > > > > > > (can not
->
-> > > > > > > > > connect) occasionally, as it kick virtio backend
->
-> > > > > > > > > failure with error
->
-> > > But I have another question, if we only fix this problem in the
->
-> > > kernel, the Linux version that has been released does not work
->
-> > > well on the
->
-> > virtualization platform.
->
-> > > Is there a way to fix this problem in the backend?
->
-> >
->
-> > There could we a way to work around this.
->
-> > Does below help?
->
->
->
-> I am sorry to tell you, I tested this patch and it doesn't work fine.
->
->
->
-> >
->
-> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-> > 236a20eaa8..7834cac4b0 100644
->
-> > --- a/hw/i386/acpi-build.c
->
-> > +++ b/hw/i386/acpi-build.c
->
-> > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-> > *parent_scope, PCIBus *bus,
->
-> >
->
-> >          aml_append(method, aml_store(aml_int(bsel_val),
->
-aml_name("BNUM")));
->
-> >          aml_append(method,
->
-> > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
->
-> > Check
->
-*/)
->
-> > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
->
-> > + Device Check Light */)
->
-> >          );
->
-> >          aml_append(method,
->
-> >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject
->
-> > Request */)
->
->
->
-Oh I see, another bug:
->
->
-case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
->
-acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT
->
-event\n");
->
-/* TBD: Exactly what does 'light' mean? */
->
-break;
->
->
-And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
->
-and friends all just ignore this event type.
->
->
->
->
---
->
-MST
-Hi Michael,
-
-If we want to fix this problem on the backend, it is not enough to consider 
-only PCI
-device hot plugging, because I found that if we use a command like
-"echo 1 > /sys/bus/pci/rescan" in guest, this problem is very easy to reproduce.
-
-From the perspective of device emulation, when guest writes 0xffffffff to the 
-BAR,
-guest just want to get the size of the region but not really updating the 
-address space.
-So I made the following patch to avoid  update pci mapping.
-
-Do you think this make sense?
-
-[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
-
-When guest writes 0xffffffff to the BAR, guest just want to get the size of the 
-region
-but not really updating the address space.
-So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings 
-or pci_bridge_update_mappings.
-
-Signed-off-by: xuyandong <address@hidden>
----
- hw/pci/pci.c        | 6 ++++--
- hw/pci/pci_bridge.c | 8 +++++---
- 2 files changed, 9 insertions(+), 5 deletions(-)
-
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
-index 56b13b3..ef368e1 100644
---- a/hw/pci/pci.c
-+++ b/hw/pci/pci.c
-@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
-addr, uint32_t val_in, int
- {
-     int i, was_irq_disabled = pci_irq_disabled(d);
-     uint32_t val = val_in;
-+    uint64_t barmask = (1 << l*8) - 1;
- 
-     for (i = 0; i < l; val >>= 8, ++i) {
-         uint8_t wmask = d->wmask[addr + i];
-@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
-addr, uint32_t val_in, int
-         d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
-         d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
-     }
--    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
-+    if ((val_in != barmask &&
-+       (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
-         ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
--        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
-+        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
-         range_covers_byte(addr, l, PCI_COMMAND))
-         pci_update_mappings(d);
- 
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
-index ee9dff2..f2bad79 100644
---- a/hw/pci/pci_bridge.c
-+++ b/hw/pci/pci_bridge.c
-@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
-     PCIBridge *s = PCI_BRIDGE(d);
-     uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
-     uint16_t newctl;
-+    uint64_t barmask = (1 << len * 8) - 1;
- 
-     pci_default_write_config(d, address, val, len);
- 
-     if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
- 
--        /* io base/limit */
--        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
-+        (val != barmask &&
-+       /* io base/limit */
-+        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
- 
-         /* memory base/limit, prefetchable base/limit and
-            io base/limit upper 16 */
--        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
-+        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
- 
-         /* vga enable */
-         ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
--- 
-1.8.3.1
-
-On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
->
-> > > > > > > > > > Hi all,
->
-> > > > > > > > > >
->
-> > > > > > > > > >
->
-> > > > > > > > > >
->
-> > > > > > > > > > In our test, we configured VM with several pci-bridges
->
-> > > > > > > > > > and a virtio-net nic been attached with bus 4,
->
-> > > > > > > > > >
->
-> > > > > > > > > > After VM is startup, We ping this nic from host to
->
-> > > > > > > > > > judge if it is working normally. Then, we hot add pci
->
-> > > > > > > > > > devices to this VM with bus
->
-> > > > > 0.
->
-> > > > > > > > > >
->
-> > > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
->
-> > > > > > > > > > (can not
->
-> > > > > > > > > > connect) occasionally, as it kick virtio backend
->
-> > > > > > > > > > failure with error
->
->
-> > > > But I have another question, if we only fix this problem in the
->
-> > > > kernel, the Linux version that has been released does not work
->
-> > > > well on the
->
-> > > virtualization platform.
->
-> > > > Is there a way to fix this problem in the backend?
->
-> > >
->
-> > > There could we a way to work around this.
->
-> > > Does below help?
->
-> >
->
-> > I am sorry to tell you, I tested this patch and it doesn't work fine.
->
-> >
->
-> > >
->
-> > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-> > > 236a20eaa8..7834cac4b0 100644
->
-> > > --- a/hw/i386/acpi-build.c
->
-> > > +++ b/hw/i386/acpi-build.c
->
-> > > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-> > > *parent_scope, PCIBus *bus,
->
-> > >
->
-> > >          aml_append(method, aml_store(aml_int(bsel_val),
->
-> aml_name("BNUM")));
->
-> > >          aml_append(method,
->
-> > > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
->
-> > > Check
->
-> */)
->
-> > > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
->
-> > > + Device Check Light */)
->
-> > >          );
->
-> > >          aml_append(method,
->
-> > >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject
->
-> > > Request */)
->
->
->
->
->
-> Oh I see, another bug:
->
->
->
->         case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
->
->                 acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT
->
-> event\n");
->
->                 /* TBD: Exactly what does 'light' mean? */
->
->                 break;
->
->
->
-> And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
->
-> and friends all just ignore this event type.
->
->
->
->
->
->
->
-> --
->
-> MST
->
->
-Hi Michael,
->
->
-If we want to fix this problem on the backend, it is not enough to consider
->
-only PCI
->
-device hot plugging, because I found that if we use a command like
->
-"echo 1 > /sys/bus/pci/rescan" in guest, this problem is very easy to
->
-reproduce.
->
->
-From the perspective of device emulation, when guest writes 0xffffffff to the
->
-BAR,
->
-guest just want to get the size of the region but not really updating the
->
-address space.
->
-So I made the following patch to avoid  update pci mapping.
->
->
-Do you think this make sense?
->
->
-[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
->
->
-When guest writes 0xffffffff to the BAR, guest just want to get the size of
->
-the region
->
-but not really updating the address space.
->
-So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings
->
-or pci_bridge_update_mappings.
->
->
-Signed-off-by: xuyandong <address@hidden>
-I see how that will address the common case however there are a bunch of
-issues here.  First of all it's easy to trigger the update by some other
-action like VM migration.  More importantly it's just possible that
-guest actually does want to set the low 32 bit of the address to all
-ones.  For example, that is clearly listed as a way to disable all
-devices behind the bridge in the pci to pci bridge spec.
-
-Given upstream is dragging it's feet I'm open to adding a flag
-that will help keep guests going as a temporary measure.
-We will need to think about ways to restrict this as much as
-we can.
-
-
->
----
->
-hw/pci/pci.c        | 6 ++++--
->
-hw/pci/pci_bridge.c | 8 +++++---
->
-2 files changed, 9 insertions(+), 5 deletions(-)
->
->
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
->
-index 56b13b3..ef368e1 100644
->
---- a/hw/pci/pci.c
->
-+++ b/hw/pci/pci.c
->
-@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t
->
-addr, uint32_t val_in, int
->
-{
->
-int i, was_irq_disabled = pci_irq_disabled(d);
->
-uint32_t val = val_in;
->
-+    uint64_t barmask = (1 << l*8) - 1;
->
->
-for (i = 0; i < l; val >>= 8, ++i) {
->
-uint8_t wmask = d->wmask[addr + i];
->
-@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t
->
-addr, uint32_t val_in, int
->
-d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
->
-d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
->
-}
->
--    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-+    if ((val_in != barmask &&
->
-+     (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
->
--        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
->
-+        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
->
-range_covers_byte(addr, l, PCI_COMMAND))
->
-pci_update_mappings(d);
->
->
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
->
-index ee9dff2..f2bad79 100644
->
---- a/hw/pci/pci_bridge.c
->
-+++ b/hw/pci/pci_bridge.c
->
-@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
->
-PCIBridge *s = PCI_BRIDGE(d);
->
-uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
->
-uint16_t newctl;
->
-+    uint64_t barmask = (1 << len * 8) - 1;
->
->
-pci_default_write_config(d, address, val, len);
->
->
-if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
--        /* io base/limit */
->
--        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-+        (val != barmask &&
->
-+     /* io base/limit */
->
-+        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
->
-/* memory base/limit, prefetchable base/limit and
->
-io base/limit upper 16 */
->
--        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-+        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
->
->
-/* vga enable */
->
-ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
---
->
-1.8.3.1
->
->
->
-
->
------Original Message-----
->
-From: Michael S. Tsirkin [
-mailto:address@hidden
->
-Sent: Monday, January 07, 2019 11:06 PM
->
-To: xuyandong <address@hidden>
->
-Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
->
-address@hidden; Zhanghailiang <address@hidden>;
->
-wangxin (U) <address@hidden>; Huangweidong (C)
->
-<address@hidden>
->
-Subject: Re: [BUG]Unassigned mem write during pci device hot-plug
->
->
-On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
->
-> > > > > > > > > > > Hi all,
->
-> > > > > > > > > > >
->
-> > > > > > > > > > >
->
-> > > > > > > > > > >
->
-> > > > > > > > > > > In our test, we configured VM with several
->
-> > > > > > > > > > > pci-bridges and a virtio-net nic been attached
->
-> > > > > > > > > > > with bus 4,
->
-> > > > > > > > > > >
->
-> > > > > > > > > > > After VM is startup, We ping this nic from host to
->
-> > > > > > > > > > > judge if it is working normally. Then, we hot add
->
-> > > > > > > > > > > pci devices to this VM with bus
->
-> > > > > > 0.
->
-> > > > > > > > > > >
->
-> > > > > > > > > > > We  found the virtio-net NIC in bus 4 is not
->
-> > > > > > > > > > > working (can not
->
-> > > > > > > > > > > connect) occasionally, as it kick virtio backend
->
-> > > > > > > > > > > failure with error
->
->
->
-> > > > > But I have another question, if we only fix this problem in
->
-> > > > > the kernel, the Linux version that has been released does not
->
-> > > > > work well on the
->
-> > > > virtualization platform.
->
-> > > > > Is there a way to fix this problem in the backend?
->
->
->
-> Hi Michael,
->
->
->
-> If we want to fix this problem on the backend, it is not enough to
->
-> consider only PCI device hot plugging, because I found that if we use
->
-> a command like "echo 1 > /sys/bus/pci/rescan" in guest, this problem is very
->
-easy to reproduce.
->
->
->
-> From the perspective of device emulation, when guest writes 0xffffffff
->
-> to the BAR, guest just want to get the size of the region but not really
->
-updating the address space.
->
-> So I made the following patch to avoid  update pci mapping.
->
->
->
-> Do you think this make sense?
->
->
->
-> [PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
->
->
->
-> When guest writes 0xffffffff to the BAR, guest just want to get the
->
-> size of the region but not really updating the address space.
->
-> So when guest writes 0xffffffff to BAR, we need avoid
->
-> pci_update_mappings or pci_bridge_update_mappings.
->
->
->
-> Signed-off-by: xuyandong <address@hidden>
->
->
-I see how that will address the common case however there are a bunch of
->
-issues here.  First of all it's easy to trigger the update by some other
->
-action like
->
-VM migration.  More importantly it's just possible that guest actually does
->
-want
->
-to set the low 32 bit of the address to all ones.  For example, that is
->
-clearly
->
-listed as a way to disable all devices behind the bridge in the pci to pci
->
-bridge
->
-spec.
-Ok, I see. If I only skip upate when guest writing 0xFFFFFFFF to Prefetcable 
-Base Upper 32 Bits
-to meet the kernel double check problem.
-Do you think there is still risk?
-
->
->
-Given upstream is dragging it's feet I'm open to adding a flag that will help
->
-keep guests going as a temporary measure.
->
-We will need to think about ways to restrict this as much as we can.
->
->
->
-> ---
->
->  hw/pci/pci.c        | 6 ++++--
->
->  hw/pci/pci_bridge.c | 8 +++++---
->
->  2 files changed, 9 insertions(+), 5 deletions(-)
->
->
->
-> diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
->
-> --- a/hw/pci/pci.c
->
-> +++ b/hw/pci/pci.c
->
-> @@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d,
->
-> uint32_t addr, uint32_t val_in, int  {
->
->      int i, was_irq_disabled = pci_irq_disabled(d);
->
->      uint32_t val = val_in;
->
-> +    uint64_t barmask = (1 << l*8) - 1;
->
->
->
->      for (i = 0; i < l; val >>= 8, ++i) {
->
->          uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@
->
-> void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in,
->
-int
->
->          d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val &
->
-> wmask);
->
->          d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear
->
-> */
->
->      }
->
-> -    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-> +    if ((val_in != barmask &&
->
-> +   (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
->          ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
->
-> -        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
->
-> +        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
->
->          range_covers_byte(addr, l, PCI_COMMAND))
->
->          pci_update_mappings(d);
->
->
->
-> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index
->
-> ee9dff2..f2bad79 100644
->
-> --- a/hw/pci/pci_bridge.c
->
-> +++ b/hw/pci/pci_bridge.c
->
-> @@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
->
->      PCIBridge *s = PCI_BRIDGE(d);
->
->      uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
->
->      uint16_t newctl;
->
-> +    uint64_t barmask = (1 << len * 8) - 1;
->
->
->
->      pci_default_write_config(d, address, val, len);
->
->
->
->      if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
->
-> -        /* io base/limit */
->
-> -        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-> +        (val != barmask &&
->
-> +   /* io base/limit */
->
-> +        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
->
->
->          /* memory base/limit, prefetchable base/limit and
->
->             io base/limit upper 16 */
->
-> -        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-> +        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
->
->
->
->          /* vga enable */
->
->          ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
-> --
->
-> 1.8.3.1
->
->
->
->
->
->
-
-On Mon, Jan 07, 2019 at 03:28:36PM +0000, xuyandong wrote:
->
->
->
-> -----Original Message-----
->
-> From: Michael S. Tsirkin [
-mailto:address@hidden
->
-> Sent: Monday, January 07, 2019 11:06 PM
->
-> To: xuyandong <address@hidden>
->
-> Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
->
-> address@hidden; Zhanghailiang <address@hidden>;
->
-> wangxin (U) <address@hidden>; Huangweidong (C)
->
-> <address@hidden>
->
-> Subject: Re: [BUG]Unassigned mem write during pci device hot-plug
->
->
->
-> On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
->
-> > > > > > > > > > > > Hi all,
->
-> > > > > > > > > > > >
->
-> > > > > > > > > > > >
->
-> > > > > > > > > > > >
->
-> > > > > > > > > > > > In our test, we configured VM with several
->
-> > > > > > > > > > > > pci-bridges and a virtio-net nic been attached
->
-> > > > > > > > > > > > with bus 4,
->
-> > > > > > > > > > > >
->
-> > > > > > > > > > > > After VM is startup, We ping this nic from host to
->
-> > > > > > > > > > > > judge if it is working normally. Then, we hot add
->
-> > > > > > > > > > > > pci devices to this VM with bus
->
-> > > > > > > 0.
->
-> > > > > > > > > > > >
->
-> > > > > > > > > > > > We  found the virtio-net NIC in bus 4 is not
->
-> > > > > > > > > > > > working (can not
->
-> > > > > > > > > > > > connect) occasionally, as it kick virtio backend
->
-> > > > > > > > > > > > failure with error
->
-> >
->
-> > > > > > But I have another question, if we only fix this problem in
->
-> > > > > > the kernel, the Linux version that has been released does not
->
-> > > > > > work well on the
->
-> > > > > virtualization platform.
->
-> > > > > > Is there a way to fix this problem in the backend?
->
-> >
->
-> > Hi Michael,
->
-> >
->
-> > If we want to fix this problem on the backend, it is not enough to
->
-> > consider only PCI device hot plugging, because I found that if we use
->
-> > a command like "echo 1 > /sys/bus/pci/rescan" in guest, this problem is
->
-> > very
->
-> easy to reproduce.
->
-> >
->
-> > From the perspective of device emulation, when guest writes 0xffffffff
->
-> > to the BAR, guest just want to get the size of the region but not really
->
-> updating the address space.
->
-> > So I made the following patch to avoid  update pci mapping.
->
-> >
->
-> > Do you think this make sense?
->
-> >
->
-> > [PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
->
-> >
->
-> > When guest writes 0xffffffff to the BAR, guest just want to get the
->
-> > size of the region but not really updating the address space.
->
-> > So when guest writes 0xffffffff to BAR, we need avoid
->
-> > pci_update_mappings or pci_bridge_update_mappings.
->
-> >
->
-> > Signed-off-by: xuyandong <address@hidden>
->
->
->
-> I see how that will address the common case however there are a bunch of
->
-> issues here.  First of all it's easy to trigger the update by some other
->
-> action like
->
-> VM migration.  More importantly it's just possible that guest actually does
->
-> want
->
-> to set the low 32 bit of the address to all ones.  For example, that is
->
-> clearly
->
-> listed as a way to disable all devices behind the bridge in the pci to pci
->
-> bridge
->
-> spec.
->
->
-Ok, I see. If I only skip upate when guest writing 0xFFFFFFFF to Prefetcable
->
-Base Upper 32 Bits
->
-to meet the kernel double check problem.
->
-Do you think there is still risk?
-Well it's non zero since spec says such a write should disable all
-accesses. Just an idea: why not add an option to disable upper 32 bit?
-That is ugly and limits space but spec compliant.
-
->
->
->
-> Given upstream is dragging it's feet I'm open to adding a flag that will
->
-> help
->
-> keep guests going as a temporary measure.
->
-> We will need to think about ways to restrict this as much as we can.
->
->
->
->
->
-> > ---
->
-> >  hw/pci/pci.c        | 6 ++++--
->
-> >  hw/pci/pci_bridge.c | 8 +++++---
->
-> >  2 files changed, 9 insertions(+), 5 deletions(-)
->
-> >
->
-> > diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
->
-> > --- a/hw/pci/pci.c
->
-> > +++ b/hw/pci/pci.c
->
-> > @@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d,
->
-> > uint32_t addr, uint32_t val_in, int  {
->
-> >      int i, was_irq_disabled = pci_irq_disabled(d);
->
-> >      uint32_t val = val_in;
->
-> > +    uint64_t barmask = (1 << l*8) - 1;
->
-> >
->
-> >      for (i = 0; i < l; val >>= 8, ++i) {
->
-> >          uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@
->
-> > void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t
->
-> > val_in,
->
-> int
->
-> >          d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val &
->
-> > wmask);
->
-> >          d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to
->
-> > Clear */
->
-> >      }
->
-> > -    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-> > +    if ((val_in != barmask &&
->
-> > + (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-> >          ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
->
-> > -        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
->
-> > +        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
->
-> >          range_covers_byte(addr, l, PCI_COMMAND))
->
-> >          pci_update_mappings(d);
->
-> >
->
-> > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index
->
-> > ee9dff2..f2bad79 100644
->
-> > --- a/hw/pci/pci_bridge.c
->
-> > +++ b/hw/pci/pci_bridge.c
->
-> > @@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
->
-> >      PCIBridge *s = PCI_BRIDGE(d);
->
-> >      uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
->
-> >      uint16_t newctl;
->
-> > +    uint64_t barmask = (1 << len * 8) - 1;
->
-> >
->
-> >      pci_default_write_config(d, address, val, len);
->
-> >
->
-> >      if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
-> >
->
-> > -        /* io base/limit */
->
-> > -        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-> > +        (val != barmask &&
->
-> > + /* io base/limit */
->
-> > +        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-> >
->
-> >          /* memory base/limit, prefetchable base/limit and
->
-> >             io base/limit upper 16 */
->
-> > -        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-> > +        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
->
-> >
->
-> >          /* vga enable */
->
-> >          ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
-> > --
->
-> > 1.8.3.1
->
-> >
->
-> >
->
-> >
-
->
------Original Message-----
->
-From: xuyandong
->
-Sent: Monday, January 07, 2019 10:37 PM
->
-To: 'Michael S. Tsirkin' <address@hidden>
->
-Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
->
-address@hidden; Zhanghailiang <address@hidden>;
->
-wangxin (U) <address@hidden>; Huangweidong (C)
->
-<address@hidden>
->
-Subject: RE: [BUG]Unassigned mem write during pci device hot-plug
->
->
-> > > > > > > > > > Hi all,
->
-> > > > > > > > > >
->
-> > > > > > > > > >
->
-> > > > > > > > > >
->
-> > > > > > > > > > In our test, we configured VM with several
->
-> > > > > > > > > > pci-bridges and a virtio-net nic been attached with
->
-> > > > > > > > > > bus 4,
->
-> > > > > > > > > >
->
-> > > > > > > > > > After VM is startup, We ping this nic from host to
->
-> > > > > > > > > > judge if it is working normally. Then, we hot add
->
-> > > > > > > > > > pci devices to this VM with bus
->
-> > > > > 0.
->
-> > > > > > > > > >
->
-> > > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
->
-> > > > > > > > > > (can not
->
-> > > > > > > > > > connect) occasionally, as it kick virtio backend
->
-> > > > > > > > > > failure with error
->
->
-> > > > But I have another question, if we only fix this problem in the
->
-> > > > kernel, the Linux version that has been released does not work
->
-> > > > well on the
->
-> > > virtualization platform.
->
-> > > > Is there a way to fix this problem in the backend?
->
-> > >
->
-> > > There could we a way to work around this.
->
-> > > Does below help?
->
-> >
->
-> > I am sorry to tell you, I tested this patch and it doesn't work fine.
->
-> >
->
-> > >
->
-> > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
->
-> > > 236a20eaa8..7834cac4b0 100644
->
-> > > --- a/hw/i386/acpi-build.c
->
-> > > +++ b/hw/i386/acpi-build.c
->
-> > > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
->
-> > > *parent_scope, PCIBus *bus,
->
-> > >
->
-> > >          aml_append(method, aml_store(aml_int(bsel_val),
->
-> aml_name("BNUM")));
->
-> > >          aml_append(method,
->
-> > > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
->
-Check
->
-> */)
->
-> > > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
->
-> > > + Device Check Light */)
->
-> > >          );
->
-> > >          aml_append(method,
->
-> > >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/*
->
-> > > Eject Request */)
->
->
->
->
->
-> Oh I see, another bug:
->
->
->
->         case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
->
->                 acpi_handle_debug(handle,
->
-> "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n");
->
->                 /* TBD: Exactly what does 'light' mean? */
->
->                 break;
->
->
->
-> And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32
->
-> type) and friends all just ignore this event type.
->
->
->
->
->
->
->
-> --
->
-> MST
->
->
-Hi Michael,
->
->
-If we want to fix this problem on the backend, it is not enough to consider
->
-only
->
-PCI device hot plugging, because I found that if we use a command like "echo
->
-1 >
->
-/sys/bus/pci/rescan" in guest, this problem is very easy to reproduce.
->
->
-From the perspective of device emulation, when guest writes 0xffffffff to the
->
-BAR, guest just want to get the size of the region but not really updating the
->
-address space.
->
-So I made the following patch to avoid  update pci mapping.
->
->
-Do you think this make sense?
->
->
-[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
->
->
-When guest writes 0xffffffff to the BAR, guest just want to get the size of
->
-the
->
-region but not really updating the address space.
->
-So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings or
->
-pci_bridge_update_mappings.
->
->
-Signed-off-by: xuyandong <address@hidden>
->
----
->
-hw/pci/pci.c        | 6 ++++--
->
-hw/pci/pci_bridge.c | 8 +++++---
->
-2 files changed, 9 insertions(+), 5 deletions(-)
->
->
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
->
---- a/hw/pci/pci.c
->
-+++ b/hw/pci/pci.c
->
-@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t
->
-addr, uint32_t val_in, int  {
->
-int i, was_irq_disabled = pci_irq_disabled(d);
->
-uint32_t val = val_in;
->
-+    uint64_t barmask = (1 << l*8) - 1;
->
->
-for (i = 0; i < l; val >>= 8, ++i) {
->
-uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@ void
->
-pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int
->
-d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
->
-d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
->
-}
->
--    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-+    if ((val_in != barmask &&
->
-+     (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
->
-ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
->
--        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
->
-+        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
->
-range_covers_byte(addr, l, PCI_COMMAND))
->
-pci_update_mappings(d);
->
->
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index ee9dff2..f2bad79
->
-100644
->
---- a/hw/pci/pci_bridge.c
->
-+++ b/hw/pci/pci_bridge.c
->
-@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
->
-PCIBridge *s = PCI_BRIDGE(d);
->
-uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
->
-uint16_t newctl;
->
-+    uint64_t barmask = (1 << len * 8) - 1;
->
->
-pci_default_write_config(d, address, val, len);
->
->
-if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
->
->
--        /* io base/limit */
->
--        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
-+        (val != barmask &&
->
-+     /* io base/limit */
->
-+        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
->
->
-/* memory base/limit, prefetchable base/limit and
->
-io base/limit upper 16 */
->
--        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
->
-+        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
->
->
-/* vga enable */
->
-ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
->
---
->
-1.8.3.1
->
->
-Sorry, please ignore the patch above.
-
-Here is the patch I want to post:
-
-diff --git a/hw/pci/pci.c b/hw/pci/pci.c
-index 56b13b3..38a300f 100644
---- a/hw/pci/pci.c
-+++ b/hw/pci/pci.c
-@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
-addr, uint32_t val_in, int
- {
-     int i, was_irq_disabled = pci_irq_disabled(d);
-     uint32_t val = val_in;
-+    uint64_t barmask = ((uint64_t)1 << l*8) - 1;
- 
-     for (i = 0; i < l; val >>= 8, ++i) {
-         uint8_t wmask = d->wmask[addr + i];
-@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
-addr, uint32_t val_in, int
-         d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
-         d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
-     }
--    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
-+    if ((val_in != barmask &&
-+       (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
-         ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
--        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
-+        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
-         range_covers_byte(addr, l, PCI_COMMAND))
-         pci_update_mappings(d);
- 
-diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
-index ee9dff2..b8f7d48 100644
---- a/hw/pci/pci_bridge.c
-+++ b/hw/pci/pci_bridge.c
-@@ -253,20 +253,22 @@ void pci_bridge_write_config(PCIDevice *d,
-     PCIBridge *s = PCI_BRIDGE(d);
-     uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
-     uint16_t newctl;
-+    uint64_t barmask = ((uint64_t)1 << len * 8) - 1;
- 
-     pci_default_write_config(d, address, val, len);
- 
-     if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
- 
--        /* io base/limit */
--        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
-+        /* vga enable */
-+        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2) ||
- 
--        /* memory base/limit, prefetchable base/limit and
--           io base/limit upper 16 */
--        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
-+        (val != barmask &&
-+        /* io base/limit */
-+         (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
- 
--        /* vga enable */
--        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
-+         /* memory base/limit, prefetchable base/limit and
-+            io base/limit upper 16 */
-+         ranges_overlap(address, len, PCI_MEMORY_BASE, 20)))) {
-         pci_bridge_update_mappings(s);
-     }
- 
--- 
-1.8.3.1
-
diff --git a/results/classifier/005/other/70416488 b/results/classifier/005/other/70416488
deleted file mode 100644
index 6c0da5fd..00000000
--- a/results/classifier/005/other/70416488
+++ /dev/null
@@ -1,1187 +0,0 @@
-other: 0.980
-semantic: 0.975
-graphic: 0.972
-assembly: 0.953
-instruction: 0.947
-device: 0.945
-mistranslation: 0.942
-vnc: 0.910
-KVM: 0.908
-boot: 0.897
-network: 0.881
-socket: 0.870
-
-[Bug Report] smmuv3 event 0x10 report when running virtio-blk-pci
-
-Hi All,
-
-When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
-during kernel booting up.
-
-qemu command which I use is as below:
-
-qemu-system-aarch64 -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
--kernel Image -initrd minifs.cpio.gz \
--enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
--append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
--device 
-pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2 
-\
--device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
--device 
-virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
--drive file=/home/boot.img,if=none,id=drive0,format=raw
-
-smmuv3 event 0x10 log:
-[...]
-[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
-[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
-[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
-[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks (1.07 
-GB/1.00 GiB)
-[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
-[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
-[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
-[    1.968381] clk: Disabling unused clocks
-[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
-[    1.968990] PM: genpd: Disabling unused power domains
-[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.969814] ALSA device list:
-[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.970471]   No soundcards found.
-[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
-[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
-[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
-[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
-[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.975005] Freeing unused kernel memory: 10112K
-[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
-[    1.975442] Run init as init process
-
-Another information is that if "maxcpus=3" is removed from the kernel command 
-line,
-it will be OK.
-
-I am not sure if there is a bug about vsmmu. It will be very appreciated if 
-anyone
-know this issue or can take a look at it.
-
-Thanks,
-Zhou
-
-On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->
-Hi All,
->
->
-When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
-during kernel booting up.
-Does it still do this if you either:
- (1) use the v9.1.0 release (commit fd1952d814da)
- (2) use "-machine virt-9.1" instead of "-machine virt"
-
-?
-
-My suspicion is that this will have started happening now that
-we expose an SMMU with two-stage translation support to the guest
-in the "virt" machine type (which we do not if you either
-use virt-9.1 or in the v9.1.0 release).
-
-I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
-the two-stage support).
-
->
-qemu command which I use is as below:
->
->
-qemu-system-aarch64 -machine
->
-virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
--kernel Image -initrd minifs.cpio.gz \
->
--enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
--append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
--device
->
-pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
-\
->
--device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
--device
->
-virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
--drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->
-smmuv3 event 0x10 log:
->
-[...]
->
-[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
-[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
-[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
-[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
-(1.07 GB/1.00 GiB)
->
-[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
-[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.968381] clk: Disabling unused clocks
->
-[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.968990] PM: genpd: Disabling unused power domains
->
-[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.969814] ALSA device list:
->
-[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.970471]   No soundcards found.
->
-[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.975005] Freeing unused kernel memory: 10112K
->
-[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.975442] Run init as init process
->
->
-Another information is that if "maxcpus=3" is removed from the kernel command
->
-line,
->
-it will be OK.
->
->
-I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
-anyone
->
-know this issue or can take a look at it.
-thanks
--- PMM
-
-On 2024/9/9 22:31, Peter Maydell wrote:
->
-On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->
->
-> Hi All,
->
->
->
-> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
-> during kernel booting up.
->
->
-Does it still do this if you either:
->
-(1) use the v9.1.0 release (commit fd1952d814da)
->
-(2) use "-machine virt-9.1" instead of "-machine virt"
-I tested above two cases, the problem is still there.
-
->
->
-?
->
->
-My suspicion is that this will have started happening now that
->
-we expose an SMMU with two-stage translation support to the guest
->
-in the "virt" machine type (which we do not if you either
->
-use virt-9.1 or in the v9.1.0 release).
->
->
-I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
->
-the two-stage support).
->
->
-> qemu command which I use is as below:
->
->
->
-> qemu-system-aarch64 -machine
->
-> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
-> -kernel Image -initrd minifs.cpio.gz \
->
-> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
-> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
-> -device
->
-> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
->  \
->
-> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
-> -device
->
-> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
-> -drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->
->
-> smmuv3 event 0x10 log:
->
-> [...]
->
-> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
-> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
-> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
-> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
-> (1.07 GB/1.00 GiB)
->
-> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
-> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.968381] clk: Disabling unused clocks
->
-> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.968990] PM: genpd: Disabling unused power domains
->
-> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.969814] ALSA device list:
->
-> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.970471]   No soundcards found.
->
-> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.975005] Freeing unused kernel memory: 10112K
->
-> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.975442] Run init as init process
->
->
->
-> Another information is that if "maxcpus=3" is removed from the kernel
->
-> command line,
->
-> it will be OK.
->
->
->
-> I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
-> anyone
->
-> know this issue or can take a look at it.
->
->
-thanks
->
--- PMM
->
-.
-
-Hi Zhou,
-On 9/10/24 03:24, Zhou Wang via wrote:
->
-On 2024/9/9 22:31, Peter Maydell wrote:
->
-> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->> Hi All,
->
->>
->
->> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
->> during kernel booting up.
->
-> Does it still do this if you either:
->
->  (1) use the v9.1.0 release (commit fd1952d814da)
->
->  (2) use "-machine virt-9.1" instead of "-machine virt"
->
-I tested above two cases, the problem is still there.
-Thank you for reporting. I am able to reproduce and effectively the
-maxcpus kernel option is triggering the issue. It works without. I will
-come back to you asap.
-
-Eric
->
->
-> ?
->
->
->
-> My suspicion is that this will have started happening now that
->
-> we expose an SMMU with two-stage translation support to the guest
->
-> in the "virt" machine type (which we do not if you either
->
-> use virt-9.1 or in the v9.1.0 release).
->
->
->
-> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
->
-> the two-stage support).
->
->
->
->> qemu command which I use is as below:
->
->>
->
->> qemu-system-aarch64 -machine
->
->> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
->> -kernel Image -initrd minifs.cpio.gz \
->
->> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
->> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
->> -device
->
->> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
->>  \
->
->> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
->> -device
->
->> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
->> -drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->>
->
->> smmuv3 event 0x10 log:
->
->> [...]
->
->> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
->> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
->> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
->> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
->> (1.07 GB/1.00 GiB)
->
->> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
->> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.968381] clk: Disabling unused clocks
->
->> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.968990] PM: genpd: Disabling unused power domains
->
->> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.969814] ALSA device list:
->
->> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.970471]   No soundcards found.
->
->> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975005] Freeing unused kernel memory: 10112K
->
->> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975442] Run init as init process
->
->>
->
->> Another information is that if "maxcpus=3" is removed from the kernel
->
->> command line,
->
->> it will be OK.
->
->>
->
->> I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
->> anyone
->
->> know this issue or can take a look at it.
->
-> thanks
->
-> -- PMM
->
-> .
-
-Hi,
-
-On 9/10/24 03:24, Zhou Wang via wrote:
->
-On 2024/9/9 22:31, Peter Maydell wrote:
->
-> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->> Hi All,
->
->>
->
->> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
->> during kernel booting up.
->
-> Does it still do this if you either:
->
->  (1) use the v9.1.0 release (commit fd1952d814da)
->
->  (2) use "-machine virt-9.1" instead of "-machine virt"
->
-I tested above two cases, the problem is still there.
-I have not much progressed yet but I see it comes with
-qemu traces.
-
-smmuv3-iommu-memory-region-0-0 translation failed for iova=0x0
-(SMMU_EVT_F_TRANSLATION)
-../..
-qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
-ensure -accel kvm is set.
-qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
-userspace (slower).
-
-the PCIe Host bridge seems to cause that translation failure at iova=0
-
-Also virtio-iommu has the same issue:
-qemu-system-aarch64: virtio_iommu_translate no mapping for 0x0 for sid=1024
-qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
-ensure -accel kvm is set.
-qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
-userspace (slower).
-
-Only happens with maxcpus=3. Note the virtio-blk-pci is not protected by
-the vIOMMU in your case.
-
-Thanks
-
-Eric
-
->
->
-> ?
->
->
->
-> My suspicion is that this will have started happening now that
->
-> we expose an SMMU with two-stage translation support to the guest
->
-> in the "virt" machine type (which we do not if you either
->
-> use virt-9.1 or in the v9.1.0 release).
->
->
->
-> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
->
-> the two-stage support).
->
->
->
->> qemu command which I use is as below:
->
->>
->
->> qemu-system-aarch64 -machine
->
->> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
->> -kernel Image -initrd minifs.cpio.gz \
->
->> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
->> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
->> -device
->
->> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
->>  \
->
->> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
->> -device
->
->> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
->> -drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->>
->
->> smmuv3 event 0x10 log:
->
->> [...]
->
->> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
->> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
->> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
->> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
->> (1.07 GB/1.00 GiB)
->
->> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
->> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.968381] clk: Disabling unused clocks
->
->> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.968990] PM: genpd: Disabling unused power domains
->
->> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.969814] ALSA device list:
->
->> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.970471]   No soundcards found.
->
->> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975005] Freeing unused kernel memory: 10112K
->
->> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975442] Run init as init process
->
->>
->
->> Another information is that if "maxcpus=3" is removed from the kernel
->
->> command line,
->
->> it will be OK.
->
->>
->
->> I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
->> anyone
->
->> know this issue or can take a look at it.
->
-> thanks
->
-> -- PMM
->
-> .
-
-Hi Zhou,
-
-On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->
-Hi All,
->
->
-When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
-during kernel booting up.
->
->
-qemu command which I use is as below:
->
->
-qemu-system-aarch64 -machine
->
-virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
--kernel Image -initrd minifs.cpio.gz \
->
--enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
--append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
--device
->
-pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
-\
->
--device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
--device
->
-virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
--drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->
-smmuv3 event 0x10 log:
->
-[...]
->
-[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
-[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
-[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
-[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
-(1.07 GB/1.00 GiB)
->
-[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
-[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.968381] clk: Disabling unused clocks
->
-[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.968990] PM: genpd: Disabling unused power domains
->
-[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.969814] ALSA device list:
->
-[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.970471]   No soundcards found.
->
-[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.975005] Freeing unused kernel memory: 10112K
->
-[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-[    1.975442] Run init as init process
->
->
-Another information is that if "maxcpus=3" is removed from the kernel command
->
-line,
->
-it will be OK.
->
-That's interesting, not sure how that would be related.
-
->
-I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
-anyone
->
-know this issue or can take a look at it.
->
-Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
-
-Also if possible, can you please provide which Linux kernel version
-you are using, I will see if I can repro.
-
-Thanks,
-Mostafa
-
->
-Thanks,
->
-Zhou
->
->
->
-
-On 2024/9/9 22:47, Mostafa Saleh wrote:
->
-Hi Zhou,
->
->
-On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->
->
-> Hi All,
->
->
->
-> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
->
-> during kernel booting up.
->
->
->
-> qemu command which I use is as below:
->
->
->
-> qemu-system-aarch64 -machine
->
-> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
-> -kernel Image -initrd minifs.cpio.gz \
->
-> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
-> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
-> -device
->
-> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
->  \
->
-> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
->
-> -device
->
-> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
-> -drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->
->
-> smmuv3 event 0x10 log:
->
-> [...]
->
-> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
-> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
-> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
-> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
-> (1.07 GB/1.00 GiB)
->
-> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
-> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.968381] clk: Disabling unused clocks
->
-> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.968990] PM: genpd: Disabling unused power domains
->
-> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.969814] ALSA device list:
->
-> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.970471]   No soundcards found.
->
-> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
-> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
-> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
-> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.975005] Freeing unused kernel memory: 10112K
->
-> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
-> [    1.975442] Run init as init process
->
->
->
-> Another information is that if "maxcpus=3" is removed from the kernel
->
-> command line,
->
-> it will be OK.
->
->
->
->
-That's interesting, not sure how that would be related.
->
->
-> I am not sure if there is a bug about vsmmu. It will be very appreciated if
->
-> anyone
->
-> know this issue or can take a look at it.
->
->
->
->
-Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
-Sure. Please see the attached log(using above qemu commit and command).
-
->
->
-Also if possible, can you please provide which Linux kernel version
->
-you are using, I will see if I can repro.
-I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
-
-Thanks,
-Zhou
-
->
->
-Thanks,
->
-Mostafa
->
->
-> Thanks,
->
-> Zhou
->
->
->
->
->
->
->
->
-.
-qemu_boot_log.txt
-Description:
-Text document
-
-On Tue, Sep 10, 2024 at 2:51 AM Zhou Wang <wangzhou1@hisilicon.com> wrote:
->
->
-On 2024/9/9 22:47, Mostafa Saleh wrote:
->
-> Hi Zhou,
->
->
->
-> On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
->
->>
->
->> Hi All,
->
->>
->
->> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event
->
->> 0x10
->
->> during kernel booting up.
->
->>
->
->> qemu command which I use is as below:
->
->>
->
->> qemu-system-aarch64 -machine
->
->> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
->
->> -kernel Image -initrd minifs.cpio.gz \
->
->> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
->
->> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
->
->> -device
->
->> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
->
->>  \
->
->> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1
->
->> \
->
->> -device
->
->> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
->
->> -drive file=/home/boot.img,if=none,id=drive0,format=raw
->
->>
->
->> smmuv3 event 0x10 log:
->
->> [...]
->
->> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
->
->> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
->
->> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
->
->> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
->
->> (1.07 GB/1.00 GiB)
->
->> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
->
->> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.968381] clk: Disabling unused clocks
->
->> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.968990] PM: genpd: Disabling unused power domains
->
->> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.969814] ALSA device list:
->
->> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.970471]   No soundcards found.
->
->> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
->
->> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
->
->> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
->
->> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975005] Freeing unused kernel memory: 10112K
->
->> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
->
->> [    1.975442] Run init as init process
->
->>
->
->> Another information is that if "maxcpus=3" is removed from the kernel
->
->> command line,
->
->> it will be OK.
->
->>
->
->
->
-> That's interesting, not sure how that would be related.
->
->
->
->> I am not sure if there is a bug about vsmmu. It will be very appreciated
->
->> if anyone
->
->> know this issue or can take a look at it.
->
->>
->
->
->
-> Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
->
->
-Sure. Please see the attached log(using above qemu commit and command).
->
-Thanks a lot, it seems the SMMUv3 indeed receives a translation
-request with addr 0x0 which causes this event.
-I don't see any kind of modification (alignment) of the address in this path.
-So my hunch it's not related to the SMMUv3 and the initiator is
-issuing bogus addresses.
-
->
->
->
-> Also if possible, can you please provide which Linux kernel version
->
-> you are using, I will see if I can repro.
->
->
-I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
->
-I see, I can't repro in my setup which has no "--enable-kvm" and with
-"-cpu max" instead of host.
-I will try other options and see if I can repro.
-
-Thanks,
-Mostafa
->
-Thanks,
->
-Zhou
->
->
->
->
-> Thanks,
->
-> Mostafa
->
->
->
->> Thanks,
->
->> Zhou
->
->>
->
->>
->
->>
->
->
->
-> .
-
diff --git a/results/classifier/005/other/74715356 b/results/classifier/005/other/74715356
deleted file mode 100644
index 8725e032..00000000
--- a/results/classifier/005/other/74715356
+++ /dev/null
@@ -1,134 +0,0 @@
-other: 0.927
-semantic: 0.916
-instruction: 0.910
-assembly: 0.905
-device: 0.900
-graphic: 0.894
-boot: 0.881
-mistranslation: 0.870
-KVM: 0.863
-vnc: 0.850
-socket: 0.843
-network: 0.838
-
-[Bug] x86 EFLAGS refresh is not happening correctly
-
-Hello,
-I'm posting this here instead of opening an issue as it is not clear to me if this is a bug or not.
-The issue is located in function "cpu_compute_eflags" in target/i386/cpu.h
-(
-https://gitlab.com/qemu-project/qemu/-/blob/master/target/i386/cpu.h#L2071
-)
-This function is exectued in an out of cpu loop context.
-It is used to synchronize TCG internal eflags registers (CC_OP, CC_SRC,  etc...) with the CPU eflags field upon loop exit.
-It does:
-    eflags
-|=
-cpu_cc_compute_all
-(
-env
-,
-CC_OP
-)
-|
-(
-env
-->
-df
-&
-DF_MASK
-);
-Shouldn't it be:
-    Â
-eflags
-=
-cpu_cc_compute_all
-(
-env
-,
-CC_OP
-)
-|
-(
-env
-->
-df
-&
-DF_MASK
-);
-as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
-Thanks,
-Kind regards,
-Stevie
-
-On 05/08/21 11:51, Stevie Lavern wrote:
-Shouldn't it be:
-eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
-as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
-No, both are wrong.  env->eflags contains flags other than the
-arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
-The right code is in helper_read_eflags.  You can move it into
-cpu_compute_eflags, and make helper_read_eflags use it.
-Paolo
-
-On 05/08/21 13:24, Paolo Bonzini wrote:
-On 05/08/21 11:51, Stevie Lavern wrote:
-Shouldn't it be:
-eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
-as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
-No, both are wrong.  env->eflags contains flags other than the
-arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
-The right code is in helper_read_eflags.  You can move it into
-cpu_compute_eflags, and make helper_read_eflags use it.
-Ah, actually the two are really the same, the TF/VM bits do not apply to
-cpu_compute_eflags so it's correct.
-What seems wrong is migration of the EFLAGS register.  There should be
-code in cpu_pre_save and cpu_post_load to special-case it and setup
-CC_DST/CC_OP as done in cpu_load_eflags.
-Also, cpu_load_eflags should assert that update_mask does not include
-any of the arithmetic flags.
-Paolo
-
-Thank for your reply!
-It's still a bit cryptic for me.
-I think i need to precise that I'm using a x86_64 custom user-mode,base on linux user-mode, that i'm developing (unfortunately i cannot share the code) with modifications in the translation loop (I've added cpu loop exits on specific instructions which are not control flow instructions).
-If my understanding is correct, in the user-mode case 'cpu_compute_eflags' is called directly by 'x86_cpu_exec_exit' with the intention of synchronizing the CPU env->eflags field with its real value (represented by the CC_* fields).
-I'm not sure how 'cpu_pre_save' and 'cpu_post_load' are involved in this case.
-Â
-As you said in your first email, 'helper_read_eflags' seems to be the correct way to go.
-Here is some detail about my current experimentation/understanding of this "issue":
-With the current implementationÂ
-        Â
-eflags |= cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
-if I exit the loop with a CC_OP different from CC_OP_EFLAGS, I found that the resulting env->eflags may be invalid.
-In my test case, the loop was exiting with eflags = 0x44 and CC_OP = CC_OP_SUBL with CC_DST=1, CC_SRC=258, CC_SRC2=0.
-While 'cpu_cc_compute_all' computes the correct flags (ZF:0, PF:0), the result will still be 0x44 (ZF:1, PF:1) due to the 'or' operation, thus leading to an incorrect eflags value loaded into the CPU env.Â
-In my case, after loop reentry, it led to an invalid branch to be taken.
-Thanks for your time!
-Regards
-Stevie
-Â
-On Thu, Aug 5, 2021 at 1:33 PM Paolo Bonzini <
-pbonzini@redhat.com
-> wrote:
-On 05/08/21 13:24, Paolo Bonzini wrote:
-> On 05/08/21 11:51, Stevie Lavern wrote:
->>
->> Shouldn't it be:
->> eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
->> as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
->
-> No, both are wrong.  env->eflags contains flags other than the
-> arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
->
-> The right code is in helper_read_eflags.  You can move it into
-> cpu_compute_eflags, and make helper_read_eflags use it.
-Ah, actually the two are really the same, the TF/VM bits do not apply to
-cpu_compute_eflags so it's correct.
-What seems wrong is migration of the EFLAGS register.  There should be
-code in cpu_pre_save and cpu_post_load to special-case it and setup
-CC_DST/CC_OP as done in cpu_load_eflags.
-Also, cpu_load_eflags should assert that update_mask does not include
-any of the arithmetic flags.
-Paolo
-
diff --git a/results/classifier/005/other/79834768 b/results/classifier/005/other/79834768
deleted file mode 100644
index a773a498..00000000
--- a/results/classifier/005/other/79834768
+++ /dev/null
@@ -1,417 +0,0 @@
-other: 0.943
-graphic: 0.933
-semantic: 0.920
-assembly: 0.918
-device: 0.915
-socket: 0.912
-instruction: 0.911
-vnc: 0.885
-boot: 0.880
-mistranslation: 0.877
-KVM: 0.840
-network: 0.830
-
-[Qemu-devel] [BUG] Windows 7 got stuck easily while run PCMark10 application
-
-Hi，
-
-We hit a bug in our test while run PCMark 10 in a windows 7 VM,
-The VM got stuck and the wallclock was hang after several minutes running
-PCMark 10 in it.
-It is quite easily to reproduce the bug with the upstream KVM and Qemu.
-
-We found that KVM can not inject any RTC irq to VM after it was hang, it fails 
-to
-Deliver irq in ioapic_set_irq() because RTC irq is still pending in ioapic->irr.
-
-static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
-                  int irq_level, bool line_status)
-{
-… …
-         if (!irq_level) {
-                  ioapic->irr &= ~mask;
-                  ret = 1;
-                  goto out;
-         }
-… …
-         if ((edge && old_irr == ioapic->irr) ||
-             (!edge && entry.fields.remote_irr)) {
-                  ret = 0;
-                  goto out;
-         }
-
-According to RTC spec, after RTC injects a High level irq, OS will read CMOS’s
-register C to to clear the irq flag, and pull down the irq electric pin.
-
-For Qemu, we will emulate the reading operation in cmos_ioport_read(),
-but Guest OS will fire a write operation before to tell which register will be 
-read
-after this write, where we use s->cmos_index to record the following register 
-to read.
-
-But in our test, we found that there is a possible situation that Vcpu fails to 
-read
-RTC_REG_C to clear irq, This could happens while two VCpus are writing/reading
-registers at the same time, for example, vcpu 0 is trying to read RTC_REG_C,
-so it write RTC_REG_C first, where the s->cmos_index will be RTC_REG_C,
-but before it tries to read register C, another vcpu1 is going to read RTC_YEAR,
-it changes s->cmos_index to RTC_YEAR by a writing action.
-The next operation of vcpu0 will be lead to read RTC_YEAR, In this case, we 
-will miss
-calling qemu_irq_lower(s->irq) to clear the irq. After this, kvm will never 
-inject RTC irq,
-and Windows VM will hang.
-static void cmos_ioport_write(void *opaque, hwaddr addr,
-                              uint64_t data, unsigned size)
-{
-    RTCState *s = opaque;
-
-    if ((addr & 1) == 0) {
-        s->cmos_index = data & 0x7f;
-    }
-……
-static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
-                                 unsigned size)
-{
-    RTCState *s = opaque;
-    int ret;
-    if ((addr & 1) == 0) {
-        return 0xff;
-    } else {
-        switch(s->cmos_index) {
-
-According to CMOS spec, ‘any write to PROT 0070h should be followed by an 
-action to PROT 0071h or the RTC
-Will be RTC will be left in an unknown state’, but it seems that we can not 
-ensure this sequence in qemu/kvm.
-
-Any ideas ?
-
-Thanks,
-Hailiang
-
-Pls see the trace of kvm_pio:
-
-       CPU 1/KVM-15567 [003] .... 209311.762579: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762582: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x89
-       CPU 1/KVM-15567 [003] .... 209311.762590: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x17
-       CPU 0/KVM-15566 [005] .... 209311.762611: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0xc
-       CPU 1/KVM-15567 [003] .... 209311.762615: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762619: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x88
-       CPU 1/KVM-15567 [003] .... 209311.762627: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x12
-       CPU 0/KVM-15566 [005] .... 209311.762632: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x12
-       CPU 1/KVM-15567 [003] .... 209311.762633: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 0/KVM-15566 [005] .... 209311.762634: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0xc           <--- Firstly write to 0x70, cmo_index = 0xc & 
-0x7f = 0xc
-       CPU 1/KVM-15567 [003] .... 209311.762636: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x86       <-- Secondly write to 0x70, cmo_index = 0x86 & 
-0x7f = 0x6, cover the cmo_index result of first time
-       CPU 0/KVM-15566 [005] .... 209311.762641: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x6      <--  vcpu0 read 0x6 because cmo_index is 0x6 now
-       CPU 1/KVM-15567 [003] .... 209311.762644: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x6     <-  vcpu1 read 0x6
-       CPU 1/KVM-15567 [003] .... 209311.762649: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762669: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x87
-       CPU 1/KVM-15567 [003] .... 209311.762678: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x1
-       CPU 1/KVM-15567 [003] .... 209311.762683: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762686: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x84
-       CPU 1/KVM-15567 [003] .... 209311.762693: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x10
-       CPU 1/KVM-15567 [003] .... 209311.762699: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762702: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x82
-       CPU 1/KVM-15567 [003] .... 209311.762709: kvm_pio: pio_read at 0x71 size 
-1 count 1 val 0x25
-       CPU 1/KVM-15567 [003] .... 209311.762714: kvm_pio: pio_read at 0x70 size 
-1 count 1 val 0xff
-       CPU 1/KVM-15567 [003] .... 209311.762717: kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x80
-
-
-Regards,
--Gonglei
-
-From: Zhanghailiang
-Sent: Friday, December 01, 2017 3:03 AM
-To: address@hidden; address@hidden; Paolo Bonzini
-Cc: Huangweidong (C); Gonglei (Arei); wangxin (U); Xiexiangyou
-Subject: [BUG] Windows 7 got stuck easily while run PCMark10 application
-
-Hi，
-
-We hit a bug in our test while run PCMark 10 in a windows 7 VM,
-The VM got stuck and the wallclock was hang after several minutes running
-PCMark 10 in it.
-It is quite easily to reproduce the bug with the upstream KVM and Qemu.
-
-We found that KVM can not inject any RTC irq to VM after it was hang, it fails 
-to
-Deliver irq in ioapic_set_irq() because RTC irq is still pending in ioapic->irr.
-
-static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
-                  int irq_level, bool line_status)
-{
-… …
-         if (!irq_level) {
-                  ioapic->irr &= ~mask;
-                  ret = 1;
-                  goto out;
-         }
-… …
-         if ((edge && old_irr == ioapic->irr) ||
-             (!edge && entry.fields.remote_irr)) {
-                  ret = 0;
-                  goto out;
-         }
-
-According to RTC spec, after RTC injects a High level irq, OS will read CMOS’s
-register C to to clear the irq flag, and pull down the irq electric pin.
-
-For Qemu, we will emulate the reading operation in cmos_ioport_read(),
-but Guest OS will fire a write operation before to tell which register will be 
-read
-after this write, where we use s->cmos_index to record the following register 
-to read.
-
-But in our test, we found that there is a possible situation that Vcpu fails to 
-read
-RTC_REG_C to clear irq, This could happens while two VCpus are writing/reading
-registers at the same time, for example, vcpu 0 is trying to read RTC_REG_C,
-so it write RTC_REG_C first, where the s->cmos_index will be RTC_REG_C,
-but before it tries to read register C, another vcpu1 is going to read RTC_YEAR,
-it changes s->cmos_index to RTC_YEAR by a writing action.
-The next operation of vcpu0 will be lead to read RTC_YEAR, In this case, we 
-will miss
-calling qemu_irq_lower(s->irq) to clear the irq. After this, kvm will never 
-inject RTC irq,
-and Windows VM will hang.
-static void cmos_ioport_write(void *opaque, hwaddr addr,
-                              uint64_t data, unsigned size)
-{
-    RTCState *s = opaque;
-
-    if ((addr & 1) == 0) {
-        s->cmos_index = data & 0x7f;
-    }
-……
-static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
-                                 unsigned size)
-{
-    RTCState *s = opaque;
-    int ret;
-    if ((addr & 1) == 0) {
-        return 0xff;
-    } else {
-        switch(s->cmos_index) {
-
-According to CMOS spec, ‘any write to PROT 0070h should be followed by an 
-action to PROT 0071h or the RTC
-Will be RTC will be left in an unknown state’, but it seems that we can not 
-ensure this sequence in qemu/kvm.
-
-Any ideas ?
-
-Thanks,
-Hailiang
-
-On 01/12/2017 08:08, Gonglei (Arei) wrote:
->
-First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
->
-       CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
->
-Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
->
-kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
->
-cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71 size
->
-1 count 1 val 0x6> vcpu1 read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read
->
-at 0x71 size 1 count 1 val 0x6
-This seems to be a Windows bug.  The easiest workaround that I
-can think of is to clear the interrupts already when 0xc is written,
-without waiting for the read (because REG_C can only be read).
-
-What do you think?
-
-Thanks,
-
-Paolo
-
-I also think it's windows bug, the problem is that it doesn't occur on xen 
-platform. And there are some other works need to be done while reading REG_C. 
-So I wrote that patch.
-
-Thanks,
-Gonglei
-发件人：Paolo Bonzini
-收件人：龚磊,张海亮,qemu-devel,Michael S. Tsirkin
-抄送：黄伟栋,王欣,谢祥有
-时间：2017-12-02 01:10:08
-主题:Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
-
-On 01/12/2017 08:08, Gonglei (Arei) wrote:
->
-First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
->
-CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
->
-Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
->
-kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
->
-cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71 size
->
-1 count 1 val 0x6> vcpu1 read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read
->
-at 0x71 size 1 count 1 val 0x6
-This seems to be a Windows bug.  The easiest workaround that I
-can think of is to clear the interrupts already when 0xc is written,
-without waiting for the read (because REG_C can only be read).
-
-What do you think?
-
-Thanks,
-
-Paolo
-
-On 01/12/2017 18:45, Gonglei (Arei) wrote:
->
-I also think it's windows bug, the problem is that it doesn't occur on
->
-xen platform.
-It's a race, it may just be that RTC PIO is faster in Xen because it's
-implemented in the hypervisor.
-
-I will try reporting it to Microsoft.
-
-Thanks,
-
-Paolo
-
->
-Thanks,
->
-Gonglei
->
-*发件人：*Paolo Bonzini
->
-*收件人：*龚磊,张海亮,qemu-devel,Michael S. Tsirkin
->
-*抄送：*黄伟栋,王欣,谢祥有
->
-*时间：*2017-12-02 01:10:08
->
-*主题:*Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
->
->
-On 01/12/2017 08:08, Gonglei (Arei) wrote:
->
-> First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
->
->        CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
->
-> Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
->
-> kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
->
-> cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71
->
-> size 1 count 1 val 0x6> vcpu1
->
-read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read at 0x71 size 1 count
->
-1 val 0x6
->
-This seems to be a Windows bug.  The easiest workaround that I
->
-can think of is to clear the interrupts already when 0xc is written,
->
-without waiting for the read (because REG_C can only be read).
->
->
-What do you think?
->
->
-Thanks,
->
->
-Paolo
-
-On 2017/12/2 2:37, Paolo Bonzini wrote:
-On 01/12/2017 18:45, Gonglei (Arei) wrote:
-I also think it's windows bug, the problem is that it doesn't occur on
-xen platform.
-It's a race, it may just be that RTC PIO is faster in Xen because it's
-implemented in the hypervisor.
-No, In Xen, it does not has such problem because it injects the RTC irq without
-checking whether its previous irq been cleared or not, which we do has such 
-checking
-in KVM.
-
-static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
-        int irq_level, bool line_status)
-{
-   ... ...
-    if (!irq_level) {
-        ioapic->irr &= ~mask; -->clear the RTC irq in irr, Or we will can not 
-inject RTC irq.
-        ret = 1;
-        goto out;
-    }
-
-I agree that we move the operation of clearing RTC irq from cmos_ioport_read() 
-to
-cmos_ioport_write() to ensure the action been done.
-
-Thanks,
-Hailiang
-I will try reporting it to Microsoft.
-
-Thanks,
-
-Paolo
-Thanks,
-Gonglei
-*发件人：*Paolo Bonzini
-*收件人：*龚磊,张海亮,qemu-devel,Michael S. Tsirkin
-*抄送：*黄伟栋,王欣,谢祥有
-*时间：*2017-12-02 01:10:08
-*主题:*Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
-
-On 01/12/2017 08:08, Gonglei (Arei) wrote:
-First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
-        CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc> Second write to 
-0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567 kvm_pio: pio_write at 0x70 
-size 1 count 1 val 0x86> vcpu0 read 0x6 because cmos_index is 0x6 now:>        CPU 
-0/KVM-15566 kvm_pio: pio_read at 0x71 size 1 count 1 val 0x6> vcpu1
-read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read at 0x71 size 1 count
-1 val 0x6
-This seems to be a Windows bug.  The easiest workaround that I
-can think of is to clear the interrupts already when 0xc is written,
-without waiting for the read (because REG_C can only be read).
-
-What do you think?
-
-Thanks,
-
-Paolo
-.
-
diff --git a/results/classifier/005/other/81775929 b/results/classifier/005/other/81775929
deleted file mode 100644
index 1688f663..00000000
--- a/results/classifier/005/other/81775929
+++ /dev/null
@@ -1,243 +0,0 @@
-other: 0.877
-assembly: 0.849
-vnc: 0.825
-semantic: 0.825
-graphic: 0.818
-instruction: 0.816
-KVM: 0.815
-mistranslation: 0.811
-socket: 0.810
-device: 0.777
-network: 0.759
-boot: 0.742
-
-[Qemu-devel] [BUG] Monitor QMP is broken ?
-
-Hello!
-
- I have updated my qemu to the recent version and it seems to have lost 
-compatibility with
-libvirt. The error message is:
---- cut ---
-internal error: unable to execute QEMU command 'qmp_capabilities': QMP input 
-object member
-'id' is unexpected
---- cut ---
- What does it mean? Is it intentional or not?
-
-Kind regards,
-Pavel Fedin
-Expert Engineer
-Samsung Electronics Research center Russia
-
-Hello! 
-
->
-I have updated my qemu to the recent version and it seems to have lost
->
-compatibility
-with
->
-libvirt. The error message is:
->
---- cut ---
->
-internal error: unable to execute QEMU command 'qmp_capabilities': QMP input
->
-object
->
-member
->
-'id' is unexpected
->
---- cut ---
->
-What does it mean? Is it intentional or not?
-I have found the problem. It is caused by commit
-65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to use the 
-removed
-asynchronous interface but it still feeds in JSONs with 'id' field set to 
-something. So i
-think the related fragment in qmp_check_input_obj() function should be brought 
-back
-
-Kind regards,
-Pavel Fedin
-Expert Engineer
-Samsung Electronics Research center Russia
-
-On Fri, Jun 05, 2015 at 04:58:46PM +0300, Pavel Fedin wrote:
->
-Hello!
->
->
->  I have updated my qemu to the recent version and it seems to have lost
->
-> compatibility
->
-with
->
-> libvirt. The error message is:
->
-> --- cut ---
->
-> internal error: unable to execute QEMU command 'qmp_capabilities': QMP
->
-> input object
->
-> member
->
-> 'id' is unexpected
->
-> --- cut ---
->
->  What does it mean? Is it intentional or not?
->
->
-I have found the problem. It is caused by commit
->
-65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to use the
->
-removed
->
-asynchronous interface but it still feeds in JSONs with 'id' field set to
->
-something. So i
->
-think the related fragment in qmp_check_input_obj() function should be
->
-brought back
-If QMP is rejecting the 'id' parameter that is a regression bug.
-
-[quote]
-The QMP spec says
-
-2.3 Issuing Commands
---------------------
-
-The format for command execution is:
-
-{ "execute": json-string, "arguments": json-object, "id": json-value }
-
- Where,
-
-- The "execute" member identifies the command to be executed by the Server
-- The "arguments" member is used to pass any arguments required for the
-  execution of the command, it is optional when no arguments are
-  required. Each command documents what contents will be considered
-  valid when handling the json-argument
-- The "id" member is a transaction identification associated with the
-  command execution, it is optional and will be part of the response if
-  provided. The "id" member can be any json-value, although most
-  clients merely use a json-number incremented for each successive
-  command
-
-
-2.4 Commands Responses
-----------------------
-
-There are two possible responses which the Server will issue as the result
-of a command execution: success or error.
-
-2.4.1 success
--------------
-
-The format of a success response is:
-
-{ "return": json-value, "id": json-value }
-
- Where,
-
-- The "return" member contains the data returned by the command, which
-  is defined on a per-command basis (usually a json-object or
-  json-array of json-objects, but sometimes a json-number, json-string,
-  or json-array of json-strings); it is an empty json-object if the
-  command does not return data
-- The "id" member contains the transaction identification associated
-  with the command execution if issued by the Client
-
-[/quote]
-
-And as such, libvirt chose to /always/ send an 'id' parameter in all
-commands it issues.
-
-We don't however validate the id in the reply, though arguably we
-should have done so.
-
-Regards,
-Daniel
--- 
-|:
-http://berrange.com
--o-
-http://www.flickr.com/photos/dberrange/
-:|
-|:
-http://libvirt.org
--o-
-http://virt-manager.org
-:|
-|:
-http://autobuild.org
--o-
-http://search.cpan.org/~danberr/
-:|
-|:
-http://entangle-photo.org
--o-
-http://live.gnome.org/gtk-vnc
-:|
-
-"Daniel P. Berrange" <address@hidden> writes:
-
->
-On Fri, Jun 05, 2015 at 04:58:46PM +0300, Pavel Fedin wrote:
->
->  Hello!
->
->
->
-> >  I have updated my qemu to the recent version and it seems to have
->
-> > lost compatibility
->
-> with
->
-> > libvirt. The error message is:
->
-> > --- cut ---
->
-> > internal error: unable to execute QEMU command 'qmp_capabilities':
->
-> > QMP input object
->
-> > member
->
-> > 'id' is unexpected
->
-> > --- cut ---
->
-> >  What does it mean? Is it intentional or not?
->
->
->
->  I have found the problem. It is caused by commit
->
-> 65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to
->
-> use the removed
->
-> asynchronous interface but it still feeds in JSONs with 'id' field
->
-> set to something. So i
->
-> think the related fragment in qmp_check_input_obj() function should
->
-> be brought back
->
->
-If QMP is rejecting the 'id' parameter that is a regression bug.
-It is definitely a regression, my fault, and I'll get it fixed a.s.a.p.
-
-[...]
-
diff --git a/results/classifier/005/other/85542195 b/results/classifier/005/other/85542195
deleted file mode 100644
index 314b8f44..00000000
--- a/results/classifier/005/other/85542195
+++ /dev/null
@@ -1,128 +0,0 @@
-other: 0.944
-semantic: 0.941
-assembly: 0.941
-graphic: 0.938
-device: 0.936
-instruction: 0.935
-boot: 0.932
-vnc: 0.923
-mistranslation: 0.907
-socket: 0.905
-network: 0.899
-KVM: 0.898
-
-[Qemu-devel] [Bug in qemu-system-ppc running Mac OS 9 on Windows 10]
-
-Hi all,
-
-I've been experiencing issues when installing Mac OS 9.x using
-qemu-system-ppc.exe in Windows 10. After booting from CD image,
-partitioning a fresh disk image often hangs Qemu. When using a
-pre-partitioned disk image, the OS installation process halts
-somewhere during the process. The issues can be resolved by setting
-qemu-system-ppc.exe to run in Windows 7 compatibility mode.
-AFAIK all Qemu builds for Windows since Mac OS 9 became available as
-guest are affected.
-The issue is reproducible by installing Qemu for Windows from Stephan
-Weil on Windows 10 and boot/install Mac OS 9.x
-
-Best regards and thanks for looking into this,
-Howard
-
-On Nov 25, 2016, at 9:26 AM, address@hidden wrote:
-Hi all,
-
-I've been experiencing issues when installing Mac OS 9.x using
-qemu-system-ppc.exe in Windows 10. After booting from CD image,
-partitioning a fresh disk image often hangs Qemu. When using a
-pre-partitioned disk image, the OS installation process halts
-somewhere during the process. The issues can be resolved by setting
-qemu-system-ppc.exe to run in Windows 7 compatibility mode.
-AFAIK all Qemu builds for Windows since Mac OS 9 became available as
-guest are affected.
-The issue is reproducible by installing Qemu for Windows from Stephan
-Weil on Windows 10 and boot/install Mac OS 9.x
-
-Best regards and thanks for looking into this,
-Howard
-I assume there was some kind of behavior change for some of the
-Windows API between Windows 7 and Windows 10, that is my guess as to
-why the compatibility mode works. Could you run 'make check' on your
-system, once in Windows 7 and once in Windows 10. Maybe the tests
-will tell us something. I'm hoping that one of the tests succeeds in
-Windows 7 and fails in Windows 10. That would help us pinpoint what
-the problem is.
-What I mean by run in Windows 7 is set the mingw environment to run
-in Windows 7 compatibility mode (if possible). If you have Windows 7
-on another partition you could boot from, that would be better.
-Good luck.
-p.s. use 'make check -k' to allow all the tests to run (even if one
-or more of the tests fails).
-
->
-> Hi all,
->
->
->
-> I've been experiencing issues when installing Mac OS 9.x using
->
-> qemu-system-ppc.exe in Windows 10. After booting from CD image,
->
-> partitioning a fresh disk image often hangs Qemu. When using a
->
-> pre-partitioned disk image, the OS installation process halts
->
-> somewhere during the process. The issues can be resolved by setting
->
-> qemu-system-ppc.exe to run in Windows 7 compatibility mode.
->
-> AFAIK all Qemu builds for Windows since Mac OS 9 became available as
->
-> guest are affected.
->
-> The issue is reproducible by installing Qemu for Windows from Stephan
->
-> Weil on Windows 10 and boot/install Mac OS 9.x
->
->
->
-> Best regards and thanks for looking into this,
->
-> Howard
->
->
->
-I assume there was some kind of behavior change for some of the Windows API
->
-between Windows 7 and Windows 10, that is my guess as to why the
->
-compatibility mode works. Could you run 'make check' on your system, once in
->
-Windows 7 and once in Windows 10. Maybe the tests will tell us something.
->
-I'm hoping that one of the tests succeeds in Windows 7 and fails in Windows
->
-10. That would help us pinpoint what the problem is.
->
->
-What I mean by run in Windows 7 is set the mingw environment to run in
->
-Windows 7 compatibility mode (if possible). If you have Windows 7 on another
->
-partition you could boot from, that would be better.
->
->
-Good luck.
->
->
-p.s. use 'make check -k' to allow all the tests to run (even if one or more
->
-of the tests fails).
-Hi,
-
-Thank you for you suggestion, but I have no means to run the check you
-suggest. I cross-compile from Linux.
-
-Best regards,
-Howard
-
diff --git a/results/classifier/005/other/88225572 b/results/classifier/005/other/88225572
deleted file mode 100644
index e65837b5..00000000
--- a/results/classifier/005/other/88225572
+++ /dev/null
@@ -1,2908 +0,0 @@
-other: 0.987
-assembly: 0.981
-semantic: 0.976
-graphic: 0.974
-instruction: 0.974
-device: 0.970
-boot: 0.969
-vnc: 0.958
-socket: 0.955
-network: 0.950
-mistranslation: 0.942
-KVM: 0.924
-
-[BUG qemu 4.0] segfault when unplugging virtio-blk-pci device
-
-Hi,
-
-I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
-think it's because io completion hits use-after-free when device is
-already gone. Is this a known bug that has been fixed? (I went through
-the git log but didn't find anything obvious).
-
-gdb backtrace is:
-
-Core was generated by `/usr/local/libexec/qemu-kvm -name 
-sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
-Program terminated with signal 11, Segmentation fault.
-#0 object_get_class (obj=obj@entry=0x0) at 
-/usr/src/debug/qemu-4.0/qom/object.c:903
-903        return obj->class;
-(gdb) bt
-#0  object_get_class (obj=obj@entry=0x0) at 
-/usr/src/debug/qemu-4.0/qom/object.c:903
-#1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
-    vector=<optimized out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
-#2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
-    opaque=0x558a2f2fd420, ret=0)
-    at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
-#3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
-    at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
-#4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
-    i1=<optimized out>) at /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
-#5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
-#6  0x00007fff9ed75780 in ?? ()
-#7  0x0000000000000000 in ?? ()
-
-It seems like qemu was completing a discard/write_zero request, but
-parent BusState was already freed & set to NULL.
-
-Do we need to drain all pending request before unrealizing virtio-blk
-device? Like the following patch proposed?
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
-If more info is needed, please let me know.
-
-Thanks,
-Eryu
-
-On Tue, 31 Dec 2019 18:34:34 +0800
-Eryu Guan <address@hidden> wrote:
-
->
-Hi,
->
->
-I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-think it's because io completion hits use-after-free when device is
->
-already gone. Is this a known bug that has been fixed? (I went through
->
-the git log but didn't find anything obvious).
->
->
-gdb backtrace is:
->
->
-Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-Program terminated with signal 11, Segmentation fault.
->
-#0 object_get_class (obj=obj@entry=0x0) at
->
-/usr/src/debug/qemu-4.0/qom/object.c:903
->
-903        return obj->class;
->
-(gdb) bt
->
-#0  object_get_class (obj=obj@entry=0x0) at
->
-/usr/src/debug/qemu-4.0/qom/object.c:903
->
-#1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-    vector=<optimized out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-#2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-    opaque=0x558a2f2fd420, ret=0)
->
-    at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-#3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-    at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-#4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-    i1=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-#5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-#6  0x00007fff9ed75780 in ?? ()
->
-#7  0x0000000000000000 in ?? ()
->
->
-It seems like qemu was completing a discard/write_zero request, but
->
-parent BusState was already freed & set to NULL.
->
->
-Do we need to drain all pending request before unrealizing virtio-blk
->
-device? Like the following patch proposed?
->
->
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
->
-If more info is needed, please let me know.
-may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
->
-Thanks,
->
-Eryu
->
-
-On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-On Tue, 31 Dec 2019 18:34:34 +0800
->
-Eryu Guan <address@hidden> wrote:
->
->
-> Hi,
->
->
->
-> I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-> think it's because io completion hits use-after-free when device is
->
-> already gone. Is this a known bug that has been fixed? (I went through
->
-> the git log but didn't find anything obvious).
->
->
->
-> gdb backtrace is:
->
->
->
-> Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> Program terminated with signal 11, Segmentation fault.
->
-> #0 object_get_class (obj=obj@entry=0x0) at
->
-> /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> 903        return obj->class;
->
-> (gdb) bt
->
-> #0  object_get_class (obj=obj@entry=0x0) at
->
-> /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
->     vector=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
->     opaque=0x558a2f2fd420, ret=0)
->
->     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
->     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
->     i1=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> #6  0x00007fff9ed75780 in ?? ()
->
-> #7  0x0000000000000000 in ?? ()
->
->
->
-> It seems like qemu was completing a discard/write_zero request, but
->
-> parent BusState was already freed & set to NULL.
->
->
->
-> Do we need to drain all pending request before unrealizing virtio-blk
->
-> device? Like the following patch proposed?
->
->
->
->
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
->
->
-> If more info is needed, please let me know.
->
->
-may be this will help:
-https://patchwork.kernel.org/patch/11213047/
-Yeah, this looks promising! I'll try it out (though it's a one-time
-crash for me). Thanks!
-
-Eryu
-
-On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> On Tue, 31 Dec 2019 18:34:34 +0800
->
-> Eryu Guan <address@hidden> wrote:
->
->
->
-> > Hi,
->
-> >
->
-> > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-> > think it's because io completion hits use-after-free when device is
->
-> > already gone. Is this a known bug that has been fixed? (I went through
->
-> > the git log but didn't find anything obvious).
->
-> >
->
-> > gdb backtrace is:
->
-> >
->
-> > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > Program terminated with signal 11, Segmentation fault.
->
-> > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > 903        return obj->class;
->
-> > (gdb) bt
->
-> > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-> >     vector=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-> >     opaque=0x558a2f2fd420, ret=0)
->
-> >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-> >     i1=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > #6  0x00007fff9ed75780 in ?? ()
->
-> > #7  0x0000000000000000 in ?? ()
->
-> >
->
-> > It seems like qemu was completing a discard/write_zero request, but
->
-> > parent BusState was already freed & set to NULL.
->
-> >
->
-> > Do we need to drain all pending request before unrealizing virtio-blk
->
-> > device? Like the following patch proposed?
->
-> >
->
-> >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> >
->
-> > If more info is needed, please let me know.
->
->
->
-> may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
->
-Yeah, this looks promising! I'll try it out (though it's a one-time
->
-crash for me). Thanks!
-After applying this patch, I don't see the original segfaut and
-backtrace, but I see this crash
-
-[Thread debugging using libthread_db enabled]
-Using host libthread_db library "/lib64/libthread_db.so.1".
-Core was generated by `/usr/local/libexec/qemu-kvm -name 
-sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
-Program terminated with signal 11, Segmentation fault.
-#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0, 
-addr=0, val=<optimized out>, size=<optimized out>) at 
-/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
-1324        VirtIOPCIProxy *proxy = 
-VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
-Missing separate debuginfos, use: debuginfo-install 
-glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64 
-libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64 
-libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64 
-pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
-(gdb) bt
-#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0, 
-addr=0, val=<optimized out>, size=<optimized out>) at 
-/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
-#1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>, 
-addr=<optimized out>, value=<optimized out>, size=<optimized out>, 
-shift=<optimized out>, mask=<optimized out>, attrs=...) at 
-/usr/src/debug/qemu-4.0/memory.c:502
-#2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0, 
-value=value@entry=0x7fcdeab1b8a8, size=size@entry=2, access_size_min=<optimized 
-out>, access_size_max=<optimized out>, access_fn=0x561216835ac0 
-<memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
-    at /usr/src/debug/qemu-4.0/memory.c:568
-#3  0x0000561216837c66 in memory_region_dispatch_write 
-(mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2, 
-attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
-#4  0x00005612167e036f in flatview_write_continue (fv=fv@entry=0x56121852edd0, 
-addr=addr@entry=841813602304, attrs=..., buf=buf@entry=0x7fce7dd97028 <Address 
-0x7fce7dd97028 out of bounds>, len=len@entry=2, addr1=<optimized out>, 
-l=<optimized out>, mr=0x56121846d340)
-    at /usr/src/debug/qemu-4.0/exec.c:3279
-#5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0, addr=841813602304, 
-attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>, len=2) at 
-/usr/src/debug/qemu-4.0/exec.c:3318
-#6  0x00005612167e4a1b in address_space_write (as=<optimized out>, 
-addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>) at 
-/usr/src/debug/qemu-4.0/exec.c:3408
-#7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>, addr=<optimized 
-out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fce7dd97028 <Address 
-0x7fce7dd97028 out of bounds>, len=<optimized out>, is_write=<optimized out>) 
-at /usr/src/debug/qemu-4.0/exec.c:3419
-#8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at 
-/usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
-#9  0x000056121682255e in qemu_kvm_cpu_thread_fn (arg=arg@entry=0x56121849aa00) 
-at /usr/src/debug/qemu-4.0/cpus.c:1281
-#10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at 
-/usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
-#11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
-#12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
-
-And I searched and found
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
-backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
-blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
-bug.
-
-But I can still hit the bug even after applying the commit. Do I miss
-anything?
-
-Thanks,
-Eryu
->
-Eryu
-
-On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
->
-On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > Eryu Guan <address@hidden> wrote:
->
-> >
->
-> > > Hi,
->
-> > >
->
-> > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-> > > think it's because io completion hits use-after-free when device is
->
-> > > already gone. Is this a known bug that has been fixed? (I went through
->
-> > > the git log but didn't find anything obvious).
->
-> > >
->
-> > > gdb backtrace is:
->
-> > >
->
-> > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > Program terminated with signal 11, Segmentation fault.
->
-> > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > 903        return obj->class;
->
-> > > (gdb) bt
->
-> > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-> > >     vector=<optimized out>) at
->
-> > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-> > >     opaque=0x558a2f2fd420, ret=0)
->
-> > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-> > >     i1=<optimized out>) at
->
-> > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > #7  0x0000000000000000 in ?? ()
->
-> > >
->
-> > > It seems like qemu was completing a discard/write_zero request, but
->
-> > > parent BusState was already freed & set to NULL.
->
-> > >
->
-> > > Do we need to drain all pending request before unrealizing virtio-blk
->
-> > > device? Like the following patch proposed?
->
-> > >
->
-> > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > >
->
-> > > If more info is needed, please let me know.
->
-> >
->
-> > may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
->
->
-> Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> crash for me). Thanks!
->
->
-After applying this patch, I don't see the original segfaut and
->
-backtrace, but I see this crash
->
->
-[Thread debugging using libthread_db enabled]
->
-Using host libthread_db library "/lib64/libthread_db.so.1".
->
-Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-Program terminated with signal 11, Segmentation fault.
->
-#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-addr=0, val=<optimized out>, size=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-1324        VirtIOPCIProxy *proxy =
->
-VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-Missing separate debuginfos, use: debuginfo-install
->
-glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
->
-pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-(gdb) bt
->
-#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-addr=0, val=<optimized out>, size=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-#1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
->
-addr=<optimized out>, value=<optimized out>, size=<optimized out>,
->
-shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-/usr/src/debug/qemu-4.0/memory.c:502
->
-#2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
->
-value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
->
-access_size_min=<optimized out>, access_size_max=<optimized out>,
->
-access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
->
-attrs=...)
->
-at /usr/src/debug/qemu-4.0/memory.c:568
->
-#3  0x0000561216837c66 in memory_region_dispatch_write
->
-(mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-#4  0x00005612167e036f in flatview_write_continue
->
-(fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-len=len@entry=2, addr1=<optimized out>, l=<optimized out>, mr=0x56121846d340)
->
-at /usr/src/debug/qemu-4.0/exec.c:3279
->
-#5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028 out
->
-of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
->
-#6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/exec.c:3408
->
-#7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-addr=<optimized out>, attrs=..., attrs@entry=...,
->
-buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-len=<optimized out>, is_write=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/exec.c:3419
->
-#8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
->
-/usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-#9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-(arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-#10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-/usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-#11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-#12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
->
-And I searched and found
->
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
->
-backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
->
-bug.
->
->
-But I can still hit the bug even after applying the commit. Do I miss
->
-anything?
-Hi Eryu,
-This backtrace seems to be caused by this bug (there were two bugs in
-1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
-Although the solution hasn't been tested on virtio-blk yet, you may
-want to apply this patch:
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
-Let me know if this works.
-
-Best regards, Julia Suvorova.
-
-On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
->
->
-> On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > Eryu Guan <address@hidden> wrote:
->
-> > >
->
-> > > > Hi,
->
-> > > >
->
-> > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-> > > > think it's because io completion hits use-after-free when device is
->
-> > > > already gone. Is this a known bug that has been fixed? (I went through
->
-> > > > the git log but didn't find anything obvious).
->
-> > > >
->
-> > > > gdb backtrace is:
->
-> > > >
->
-> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > 903        return obj->class;
->
-> > > > (gdb) bt
->
-> > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-> > > >     vector=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-> > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-> > > >     i1=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > #7  0x0000000000000000 in ?? ()
->
-> > > >
->
-> > > > It seems like qemu was completing a discard/write_zero request, but
->
-> > > > parent BusState was already freed & set to NULL.
->
-> > > >
->
-> > > > Do we need to drain all pending request before unrealizing virtio-blk
->
-> > > > device? Like the following patch proposed?
->
-> > > >
->
-> > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > >
->
-> > > > If more info is needed, please let me know.
->
-> > >
->
-> > > may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
-> >
->
-> > Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> > crash for me). Thanks!
->
->
->
-> After applying this patch, I don't see the original segfaut and
->
-> backtrace, but I see this crash
->
->
->
-> [Thread debugging using libthread_db enabled]
->
-> Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> Program terminated with signal 11, Segmentation fault.
->
-> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> addr=0, val=<optimized out>, size=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> 1324        VirtIOPCIProxy *proxy =
->
-> VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> Missing separate debuginfos, use: debuginfo-install
->
-> glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
->
-> pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-> (gdb) bt
->
-> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> addr=0, val=<optimized out>, size=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
->
-> addr=<optimized out>, value=<optimized out>, size=<optimized out>,
->
-> shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-> /usr/src/debug/qemu-4.0/memory.c:502
->
-> #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
->
-> value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
->
-> access_size_min=<optimized out>, access_size_max=<optimized out>,
->
-> access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
->
-> attrs=...)
->
->     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> #4  0x00005612167e036f in flatview_write_continue
->
-> (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
->
-> mr=0x56121846d340)
->
->     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
->
-> out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
->
-> #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>)
->
-> at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> len=<optimized out>, is_write=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/exec.c:3419
->
-> #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
->
-> /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-> #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
->
->
-> And I searched and found
->
->
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
->
-> backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-> blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
->
-> bug.
->
->
->
-> But I can still hit the bug even after applying the commit. Do I miss
->
-> anything?
->
->
-Hi Eryu,
->
-This backtrace seems to be caused by this bug (there were two bugs in
->
-1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-Although the solution hasn't been tested on virtio-blk yet, you may
->
-want to apply this patch:
->
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-Let me know if this works.
-Will try it out, thanks a lot!
-
-Eryu
-
-On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
->
->
-> On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > Eryu Guan <address@hidden> wrote:
->
-> > >
->
-> > > > Hi,
->
-> > > >
->
-> > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
->
-> > > > think it's because io completion hits use-after-free when device is
->
-> > > > already gone. Is this a known bug that has been fixed? (I went through
->
-> > > > the git log but didn't find anything obvious).
->
-> > > >
->
-> > > > gdb backtrace is:
->
-> > > >
->
-> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > 903        return obj->class;
->
-> > > > (gdb) bt
->
-> > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-> > > >     vector=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-> > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-> > > >     i1=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > #7  0x0000000000000000 in ?? ()
->
-> > > >
->
-> > > > It seems like qemu was completing a discard/write_zero request, but
->
-> > > > parent BusState was already freed & set to NULL.
->
-> > > >
->
-> > > > Do we need to drain all pending request before unrealizing virtio-blk
->
-> > > > device? Like the following patch proposed?
->
-> > > >
->
-> > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > >
->
-> > > > If more info is needed, please let me know.
->
-> > >
->
-> > > may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
-> >
->
-> > Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> > crash for me). Thanks!
->
->
->
-> After applying this patch, I don't see the original segfaut and
->
-> backtrace, but I see this crash
->
->
->
-> [Thread debugging using libthread_db enabled]
->
-> Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> Program terminated with signal 11, Segmentation fault.
->
-> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> addr=0, val=<optimized out>, size=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> 1324        VirtIOPCIProxy *proxy =
->
-> VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> Missing separate debuginfos, use: debuginfo-install
->
-> glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
->
-> pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-> (gdb) bt
->
-> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> addr=0, val=<optimized out>, size=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
->
-> addr=<optimized out>, value=<optimized out>, size=<optimized out>,
->
-> shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-> /usr/src/debug/qemu-4.0/memory.c:502
->
-> #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
->
-> value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
->
-> access_size_min=<optimized out>, access_size_max=<optimized out>,
->
-> access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
->
-> attrs=...)
->
->     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> #4  0x00005612167e036f in flatview_write_continue
->
-> (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
->
-> mr=0x56121846d340)
->
->     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
->
-> out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
->
-> #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>)
->
-> at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> len=<optimized out>, is_write=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/exec.c:3419
->
-> #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
->
-> /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-> /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-> #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
->
->
-> And I searched and found
->
->
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
->
-> backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-> blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
->
-> bug.
->
->
->
-> But I can still hit the bug even after applying the commit. Do I miss
->
-> anything?
->
->
-Hi Eryu,
->
-This backtrace seems to be caused by this bug (there were two bugs in
->
-1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-Although the solution hasn't been tested on virtio-blk yet, you may
->
-want to apply this patch:
->
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-Let me know if this works.
-Unfortunately, I still see the same segfault & backtrace after applying
-commit 421afd2fe8dd ("virtio: reset region cache when on queue
-deletion")
-
-Anything I can help to debug?
-
-Thanks,
-Eryu
-
-On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
->
-On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-> On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
-> >
->
-> > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > > Eryu Guan <address@hidden> wrote:
->
-> > > >
->
-> > > > > Hi,
->
-> > > > >
->
-> > > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox,
->
-> > > > > I
->
-> > > > > think it's because io completion hits use-after-free when device is
->
-> > > > > already gone. Is this a known bug that has been fixed? (I went
->
-> > > > > through
->
-> > > > > the git log but didn't find anything obvious).
->
-> > > > >
->
-> > > > > gdb backtrace is:
->
-> > > > >
->
-> > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > 903        return obj->class;
->
-> > > > > (gdb) bt
->
-> > > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
->
-> > > > >     vector=<optimized out>) at
->
-> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
->
-> > > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
->
-> > > > >     i1=<optimized out>) at
->
-> > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > > #7  0x0000000000000000 in ?? ()
->
-> > > > >
->
-> > > > > It seems like qemu was completing a discard/write_zero request, but
->
-> > > > > parent BusState was already freed & set to NULL.
->
-> > > > >
->
-> > > > > Do we need to drain all pending request before unrealizing
->
-> > > > > virtio-blk
->
-> > > > > device? Like the following patch proposed?
->
-> > > > >
->
-> > > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > > >
->
-> > > > > If more info is needed, please let me know.
->
-> > > >
->
-> > > > may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
-> > >
->
-> > > Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> > > crash for me). Thanks!
->
-> >
->
-> > After applying this patch, I don't see the original segfaut and
->
-> > backtrace, but I see this crash
->
-> >
->
-> > [Thread debugging using libthread_db enabled]
->
-> > Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> > Program terminated with signal 11, Segmentation fault.
->
-> > #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> > addr=0, val=<optimized out>, size=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > 1324        VirtIOPCIProxy *proxy =
->
-> > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> > Missing separate debuginfos, use: debuginfo-install
->
-> > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> > libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
->
-> > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-> > (gdb) bt
->
-> > #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
->
-> > addr=0, val=<optimized out>, size=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
->
-> > out>, addr=<optimized out>, value=<optimized out>, size=<optimized out>,
->
-> > shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-> > /usr/src/debug/qemu-4.0/memory.c:502
->
-> > #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
->
-> > value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
->
-> > access_size_min=<optimized out>, access_size_max=<optimized out>,
->
-> > access_fn=0x561216835ac0 <memory_region_write_accessor>,
->
-> > mr=0x56121846d340, attrs=...)
->
-> >     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> > #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> > #4  0x00005612167e036f in flatview_write_continue
->
-> > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-> > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
->
-> > mr=0x56121846d340)
->
-> >     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
->
-> > out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
->
-> > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
->
-> > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> > addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > len=<optimized out>, is_write=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/exec.c:3419
->
-> > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
->
-> > /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-> > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-> > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
-> >
->
-> > And I searched and found
->
-> >
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
->
-> > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-> > blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
->
-> > bug.
->
-> >
->
-> > But I can still hit the bug even after applying the commit. Do I miss
->
-> > anything?
->
->
->
-> Hi Eryu,
->
-> This backtrace seems to be caused by this bug (there were two bugs in
->
-> 1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-> Although the solution hasn't been tested on virtio-blk yet, you may
->
-> want to apply this patch:
->
->
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-> Let me know if this works.
->
->
-Unfortunately, I still see the same segfault & backtrace after applying
->
-commit 421afd2fe8dd ("virtio: reset region cache when on queue
->
-deletion")
->
->
-Anything I can help to debug?
-Please post the QEMU command-line and the QMP commands use to remove the
-device.
-
-The backtrace shows a vcpu thread submitting a request.  The device
-seems to be partially destroyed.  That's surprising because the monitor
-and the vcpu thread should use the QEMU global mutex to avoid race
-conditions.  Maybe seeing the QMP commands will make it clearer...
-
-Stefan
-signature.asc
-Description:
-PGP signature
-
-On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
->
-On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
->
-> On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-> > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
-> > >
->
-> > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > > > Eryu Guan <address@hidden> wrote:
->
-> > > > >
->
-> > > > > > Hi,
->
-> > > > > >
->
-> > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
->
-> > > > > > sandbox, I
->
-> > > > > > think it's because io completion hits use-after-free when device
->
-> > > > > > is
->
-> > > > > > already gone. Is this a known bug that has been fixed? (I went
->
-> > > > > > through
->
-> > > > > > the git log but didn't find anything obvious).
->
-> > > > > >
->
-> > > > > > gdb backtrace is:
->
-> > > > > >
->
-> > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > 903        return obj->class;
->
-> > > > > > (gdb) bt
->
-> > > > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
->
-> > > > > > (vdev=0x558a2e7751d0,
->
-> > > > > >     vector=<optimized out>) at
->
-> > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > > > #2  0x0000558a2bfdcb1e in
->
-> > > > > > virtio_blk_discard_write_zeroes_complete (
->
-> > > > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
->
-> > > > > > out>,
->
-> > > > > >     i1=<optimized out>) at
->
-> > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > > > #7  0x0000000000000000 in ?? ()
->
-> > > > > >
->
-> > > > > > It seems like qemu was completing a discard/write_zero request,
->
-> > > > > > but
->
-> > > > > > parent BusState was already freed & set to NULL.
->
-> > > > > >
->
-> > > > > > Do we need to drain all pending request before unrealizing
->
-> > > > > > virtio-blk
->
-> > > > > > device? Like the following patch proposed?
->
-> > > > > >
->
-> > > > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > > > >
->
-> > > > > > If more info is needed, please let me know.
->
-> > > > >
->
-> > > > > may be this will help:
-https://patchwork.kernel.org/patch/11213047/
->
-> > > >
->
-> > > > Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> > > > crash for me). Thanks!
->
-> > >
->
-> > > After applying this patch, I don't see the original segfaut and
->
-> > > backtrace, but I see this crash
->
-> > >
->
-> > > [Thread debugging using libthread_db enabled]
->
-> > > Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> > > Program terminated with signal 11, Segmentation fault.
->
-> > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
->
-> > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > 1324        VirtIOPCIProxy *proxy =
->
-> > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> > > Missing separate debuginfos, use: debuginfo-install
->
-> > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> > > libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
->
-> > > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-> > > (gdb) bt
->
-> > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
->
-> > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
->
-> > > out>, addr=<optimized out>, value=<optimized out>, size=<optimized
->
-> > > out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-> > > /usr/src/debug/qemu-4.0/memory.c:502
->
-> > > #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
->
-> > > value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
->
-> > > access_size_min=<optimized out>, access_size_max=<optimized out>,
->
-> > > access_fn=0x561216835ac0 <memory_region_write_accessor>,
->
-> > > mr=0x56121846d340, attrs=...)
->
-> > >     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> > > #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> > > #4  0x00005612167e036f in flatview_write_continue
->
-> > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-> > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
->
-> > > mr=0x56121846d340)
->
-> > >     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
->
-> > > 0x7fce7dd97028 out of bounds>, len=2) at
->
-> > > /usr/src/debug/qemu-4.0/exec.c:3318
->
-> > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> > > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
->
-> > > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> > > addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > > len=<optimized out>, is_write=<optimized out>) at
->
-> > > /usr/src/debug/qemu-4.0/exec.c:3419
->
-> > > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00)
->
-> > > at /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> > > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-> > > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> > > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-> > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
-> > >
->
-> > > And I searched and found
->
-> > >
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the same
->
-> > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-> > > blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
->
-> > > bug.
->
-> > >
->
-> > > But I can still hit the bug even after applying the commit. Do I miss
->
-> > > anything?
->
-> >
->
-> > Hi Eryu,
->
-> > This backtrace seems to be caused by this bug (there were two bugs in
->
-> > 1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-> > Although the solution hasn't been tested on virtio-blk yet, you may
->
-> > want to apply this patch:
->
-> >
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-> > Let me know if this works.
->
->
->
-> Unfortunately, I still see the same segfault & backtrace after applying
->
-> commit 421afd2fe8dd ("virtio: reset region cache when on queue
->
-> deletion")
->
->
->
-> Anything I can help to debug?
->
->
-Please post the QEMU command-line and the QMP commands use to remove the
->
-device.
-It's a normal kata instance using virtio-fs as rootfs.
-
-/usr/local/libexec/qemu-kvm -name 
-sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
- -uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine 
-q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
- -cpu host -qmp 
-unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
- \
- -qmp 
-unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
- \
- -m 2048M,slots=10,maxmem=773893M -device 
-pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
- -device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device 
-virtconsole,chardev=charconsole0,id=console0 \
- -chardev 
-socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
- \
- -device 
-virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10 \
- -chardev 
-socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
- \
- -device nvdimm,id=nv0,memdev=mem0 -object 
-memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
- \
- -object rng-random,id=rng0,filename=/dev/urandom -device 
-virtio-rng,rng=rng0,romfile= \
- -device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
- -chardev 
-socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
- \
- -chardev 
-socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
- \
- -device 
-vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M 
--netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
- -device 
-driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
- \
- -global kvm-pit.lost_tick_policy=discard -vga none -no-user-config -nodefaults 
--nographic -daemonize \
- -object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on 
--numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
- -append tsc=reliable no_timer_check rcupdate.rcu_expedited=1 i8042.direct=1 
-i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp reboot=k console=hvc0 
-console=hvc1 iommu=off cryptomgr.notests net.ifnames=0 pci=lastbus=0 
-root=/dev/pmem0p1 rootflags=dax,data=ordered,errors=remount-ro ro 
-rootfstype=ext4 quiet systemd.show_status=false panic=1 nr_cpus=96 
-agent.use_vsock=false init=/usr/lib/systemd/systemd 
-systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service 
-systemd.mask=systemd-networkd.socket \
- -pidfile 
-/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid 
-\
- -smp 1,cores=1,threads=1,sockets=96,maxcpus=96
-
-QMP command to delete device (the device id is just an example, not the
-one caused the crash):
-
-"{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
-
-which has been hot plugged by:
-"{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
-"{\"return\": {}}"
-"{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
-"{\"return\": {}}"
-
->
->
-The backtrace shows a vcpu thread submitting a request.  The device
->
-seems to be partially destroyed.  That's surprising because the monitor
->
-and the vcpu thread should use the QEMU global mutex to avoid race
->
-conditions.  Maybe seeing the QMP commands will make it clearer...
->
->
-Stefan
-Thanks!
-
-Eryu
-
-On Tue, Jan 14, 2020 at 10:50:58AM +0800, Eryu Guan wrote:
->
-On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
->
-> On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
->
-> > On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-> > > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
-> > > >
->
-> > > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > > > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > > > > Eryu Guan <address@hidden> wrote:
->
-> > > > > >
->
-> > > > > > > Hi,
->
-> > > > > > >
->
-> > > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
->
-> > > > > > > sandbox, I
->
-> > > > > > > think it's because io completion hits use-after-free when
->
-> > > > > > > device is
->
-> > > > > > > already gone. Is this a known bug that has been fixed? (I went
->
-> > > > > > > through
->
-> > > > > > > the git log but didn't find anything obvious).
->
-> > > > > > >
->
-> > > > > > > gdb backtrace is:
->
-> > > > > > >
->
-> > > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > > 903        return obj->class;
->
-> > > > > > > (gdb) bt
->
-> > > > > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
->
-> > > > > > > (vdev=0x558a2e7751d0,
->
-> > > > > > >     vector=<optimized out>) at
->
-> > > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > > > > #2  0x0000558a2bfdcb1e in
->
-> > > > > > > virtio_blk_discard_write_zeroes_complete (
->
-> > > > > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
->
-> > > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
->
-> > > > > > > out>,
->
-> > > > > > >     i1=<optimized out>) at
->
-> > > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > > > > #7  0x0000000000000000 in ?? ()
->
-> > > > > > >
->
-> > > > > > > It seems like qemu was completing a discard/write_zero request,
->
-> > > > > > > but
->
-> > > > > > > parent BusState was already freed & set to NULL.
->
-> > > > > > >
->
-> > > > > > > Do we need to drain all pending request before unrealizing
->
-> > > > > > > virtio-blk
->
-> > > > > > > device? Like the following patch proposed?
->
-> > > > > > >
->
-> > > > > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > > > > >
->
-> > > > > > > If more info is needed, please let me know.
->
-> > > > > >
->
-> > > > > > may be this will help:
->
-> > > > > >
-https://patchwork.kernel.org/patch/11213047/
->
-> > > > >
->
-> > > > > Yeah, this looks promising! I'll try it out (though it's a one-time
->
-> > > > > crash for me). Thanks!
->
-> > > >
->
-> > > > After applying this patch, I don't see the original segfaut and
->
-> > > > backtrace, but I see this crash
->
-> > > >
->
-> > > > [Thread debugging using libthread_db enabled]
->
-> > > > Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
->
-> > > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > > 1324        VirtIOPCIProxy *proxy =
->
-> > > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> > > > Missing separate debuginfos, use: debuginfo-install
->
-> > > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> > > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> > > > libstdc++-4.8.5-28.alios7.1.x86_64
->
-> > > > numactl-libs-2.0.9-5.1.alios7.x86_64 pixman-0.32.6-3.1.alios7.x86_64
->
-> > > > zlib-1.2.7-16.2.alios7.x86_64
->
-> > > > (gdb) bt
->
-> > > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
->
-> > > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
->
-> > > > out>, addr=<optimized out>, value=<optimized out>, size=<optimized
->
-> > > > out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at
->
-> > > > /usr/src/debug/qemu-4.0/memory.c:502
->
-> > > > #2  0x0000561216833c5d in access_with_adjusted_size
->
-> > > > (addr=addr@entry=0, value=value@entry=0x7fcdeab1b8a8,
->
-> > > > size=size@entry=2, access_size_min=<optimized out>,
->
-> > > > access_size_max=<optimized out>, access_fn=0x561216835ac0
->
-> > > > <memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
->
-> > > >     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> > > > #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> > > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> > > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> > > > #4  0x00005612167e036f in flatview_write_continue
->
-> > > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
->
-> > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > > > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
->
-> > > > mr=0x56121846d340)
->
-> > > >     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> > > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> > > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
->
-> > > > 0x7fce7dd97028 out of bounds>, len=2) at
->
-> > > > /usr/src/debug/qemu-4.0/exec.c:3318
->
-> > > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> > > > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
->
-> > > > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> > > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> > > > addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
->
-> > > > len=<optimized out>, is_write=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/exec.c:3419
->
-> > > > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00)
->
-> > > > at /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> > > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> > > > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> > > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
->
-> > > > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> > > > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
->
-> > > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
-> > > >
->
-> > > > And I searched and found
->
-> > > >
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the
->
-> > > > same
->
-> > > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
->
-> > > > blk_drain() to virtio_blk_device_unrealize()") is to fix this
->
-> > > > particular
->
-> > > > bug.
->
-> > > >
->
-> > > > But I can still hit the bug even after applying the commit. Do I miss
->
-> > > > anything?
->
-> > >
->
-> > > Hi Eryu,
->
-> > > This backtrace seems to be caused by this bug (there were two bugs in
->
-> > > 1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-> > > Although the solution hasn't been tested on virtio-blk yet, you may
->
-> > > want to apply this patch:
->
-> > >
->
-> > >
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-> > > Let me know if this works.
->
-> >
->
-> > Unfortunately, I still see the same segfault & backtrace after applying
->
-> > commit 421afd2fe8dd ("virtio: reset region cache when on queue
->
-> > deletion")
->
-> >
->
-> > Anything I can help to debug?
->
->
->
-> Please post the QEMU command-line and the QMP commands use to remove the
->
-> device.
->
->
-It's a normal kata instance using virtio-fs as rootfs.
->
->
-/usr/local/libexec/qemu-kvm -name
->
-sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
->
--uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine
->
-q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
->
--cpu host -qmp
->
-unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
->
-\
->
--qmp
->
-unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
->
-\
->
--m 2048M,slots=10,maxmem=773893M -device
->
-pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
->
--device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device
->
-virtconsole,chardev=charconsole0,id=console0 \
->
--chardev
->
-socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
->
-\
->
--device
->
-virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10 \
->
--chardev
->
-socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
->
-\
->
--device nvdimm,id=nv0,memdev=mem0 -object
->
-memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
->
-\
->
--object rng-random,id=rng0,filename=/dev/urandom -device
->
-virtio-rng,rng=rng0,romfile= \
->
--device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
->
--chardev
->
-socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
->
-\
->
--chardev
->
-socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
->
-\
->
--device
->
-vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M
->
--netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
->
--device
->
-driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
->
-\
->
--global kvm-pit.lost_tick_policy=discard -vga none -no-user-config
->
--nodefaults -nographic -daemonize \
->
--object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on
->
--numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
->
--append tsc=reliable no_timer_check rcupdate.rcu_expedited=1 i8042.direct=1
->
-i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp reboot=k
->
-console=hvc0 console=hvc1 iommu=off cryptomgr.notests net.ifnames=0
->
-pci=lastbus=0 root=/dev/pmem0p1 rootflags=dax,data=ordered,errors=remount-ro
->
-ro rootfstype=ext4 quiet systemd.show_status=false panic=1 nr_cpus=96
->
-agent.use_vsock=false init=/usr/lib/systemd/systemd
->
-systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service
->
-systemd.mask=systemd-networkd.socket \
->
--pidfile
->
-/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid
->
-\
->
--smp 1,cores=1,threads=1,sockets=96,maxcpus=96
->
->
-QMP command to delete device (the device id is just an example, not the
->
-one caused the crash):
->
->
-"{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
->
->
-which has been hot plugged by:
->
-"{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
->
-"{\"return\": {}}"
->
-"{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
->
-"{\"return\": {}}"
-Thanks.  I wasn't able to reproduce this crash with qemu.git/master.
-
-One thing that is strange about the latest backtrace you posted: QEMU is
-dispatching the memory access instead of using the ioeventfd code that
-that virtio-blk-pci normally takes when a virtqueue is notified.  I
-guess this means ioeventfd has already been disabled due to the hot
-unplug.
-
-Could you try with machine type "i440fx" instead of "q35"?  I wonder if
-pci-bridge/shpc is part of the problem.
-
-Stefan
-signature.asc
-Description:
-PGP signature
-
-On Tue, Jan 14, 2020 at 04:16:24PM +0000, Stefan Hajnoczi wrote:
->
-On Tue, Jan 14, 2020 at 10:50:58AM +0800, Eryu Guan wrote:
->
-> On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
->
-> > On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
->
-> > > On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
->
-> > > > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
->
-> > > > >
->
-> > > > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
->
-> > > > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
->
-> > > > > > > On Tue, 31 Dec 2019 18:34:34 +0800
->
-> > > > > > > Eryu Guan <address@hidden> wrote:
->
-> > > > > > >
->
-> > > > > > > > Hi,
->
-> > > > > > > >
->
-> > > > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
->
-> > > > > > > > sandbox, I
->
-> > > > > > > > think it's because io completion hits use-after-free when
->
-> > > > > > > > device is
->
-> > > > > > > > already gone. Is this a known bug that has been fixed? (I
->
-> > > > > > > > went through
->
-> > > > > > > > the git log but didn't find anything obvious).
->
-> > > > > > > >
->
-> > > > > > > > gdb backtrace is:
->
-> > > > > > > >
->
-> > > > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
->
-> > > > > > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > > > > > #0 object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > > > 903        return obj->class;
->
-> > > > > > > > (gdb) bt
->
-> > > > > > > > #0  object_get_class (obj=obj@entry=0x0) at
->
-> > > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
->
-> > > > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
->
-> > > > > > > > (vdev=0x558a2e7751d0,
->
-> > > > > > > >     vector=<optimized out>) at
->
-> > > > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
->
-> > > > > > > > #2  0x0000558a2bfdcb1e in
->
-> > > > > > > > virtio_blk_discard_write_zeroes_complete (
->
-> > > > > > > >     opaque=0x558a2f2fd420, ret=0)
->
-> > > > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
->
-> > > > > > > > #3  0x0000558a2c261c7e in blk_aio_complete
->
-> > > > > > > > (acb=0x558a2eed7420)
->
-> > > > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
->
-> > > > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
->
-> > > > > > > > out>,
->
-> > > > > > > >     i1=<optimized out>) at
->
-> > > > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
->
-> > > > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
->
-> > > > > > > > #6  0x00007fff9ed75780 in ?? ()
->
-> > > > > > > > #7  0x0000000000000000 in ?? ()
->
-> > > > > > > >
->
-> > > > > > > > It seems like qemu was completing a discard/write_zero
->
-> > > > > > > > request, but
->
-> > > > > > > > parent BusState was already freed & set to NULL.
->
-> > > > > > > >
->
-> > > > > > > > Do we need to drain all pending request before unrealizing
->
-> > > > > > > > virtio-blk
->
-> > > > > > > > device? Like the following patch proposed?
->
-> > > > > > > >
->
-> > > > > > > >
-https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
->
-> > > > > > > >
->
-> > > > > > > > If more info is needed, please let me know.
->
-> > > > > > >
->
-> > > > > > > may be this will help:
->
-> > > > > > >
-https://patchwork.kernel.org/patch/11213047/
->
-> > > > > >
->
-> > > > > > Yeah, this looks promising! I'll try it out (though it's a
->
-> > > > > > one-time
->
-> > > > > > crash for me). Thanks!
->
-> > > > >
->
-> > > > > After applying this patch, I don't see the original segfaut and
->
-> > > > > backtrace, but I see this crash
->
-> > > > >
->
-> > > > > [Thread debugging using libthread_db enabled]
->
-> > > > > Using host libthread_db library "/lib64/libthread_db.so.1".
->
-> > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
->
-> > > > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
->
-> > > > > Program terminated with signal 11, Segmentation fault.
->
-> > > > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>,
->
-> > > > > size=<optimized out>) at
->
-> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > > > 1324        VirtIOPCIProxy *proxy =
->
-> > > > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
->
-> > > > > Missing separate debuginfos, use: debuginfo-install
->
-> > > > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
->
-> > > > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
->
-> > > > > libstdc++-4.8.5-28.alios7.1.x86_64
->
-> > > > > numactl-libs-2.0.9-5.1.alios7.x86_64
->
-> > > > > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
->
-> > > > > (gdb) bt
->
-> > > > > #0  0x0000561216a57609 in virtio_pci_notify_write
->
-> > > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>,
->
-> > > > > size=<optimized out>) at
->
-> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
->
-> > > > > #1  0x0000561216835b22 in memory_region_write_accessor
->
-> > > > > (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
->
-> > > > > size=<optimized out>, shift=<optimized out>, mask=<optimized out>,
->
-> > > > > attrs=...) at /usr/src/debug/qemu-4.0/memory.c:502
->
-> > > > > #2  0x0000561216833c5d in access_with_adjusted_size
->
-> > > > > (addr=addr@entry=0, value=value@entry=0x7fcdeab1b8a8,
->
-> > > > > size=size@entry=2, access_size_min=<optimized out>,
->
-> > > > > access_size_max=<optimized out>, access_fn=0x561216835ac0
->
-> > > > > <memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
->
-> > > > >     at /usr/src/debug/qemu-4.0/memory.c:568
->
-> > > > > #3  0x0000561216837c66 in memory_region_dispatch_write
->
-> > > > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
->
-> > > > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
->
-> > > > > #4  0x00005612167e036f in flatview_write_continue
->
-> > > > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304,
->
-> > > > > attrs=..., buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out
->
-> > > > > of bounds>, len=len@entry=2, addr1=<optimized out>, l=<optimized
->
-> > > > > out>, mr=0x56121846d340)
->
-> > > > >     at /usr/src/debug/qemu-4.0/exec.c:3279
->
-> > > > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
->
-> > > > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
->
-> > > > > 0x7fce7dd97028 out of bounds>, len=2) at
->
-> > > > > /usr/src/debug/qemu-4.0/exec.c:3318
->
-> > > > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
->
-> > > > > addr=<optimized out>, attrs=..., buf=<optimized out>,
->
-> > > > > len=<optimized out>) at /usr/src/debug/qemu-4.0/exec.c:3408
->
-> > > > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
->
-> > > > > addr=<optimized out>, attrs=..., attrs@entry=...,
->
-> > > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of
->
-> > > > > bounds>, len=<optimized out>, is_write=<optimized out>) at
->
-> > > > > /usr/src/debug/qemu-4.0/exec.c:3419
->
-> > > > > #8  0x0000561216849da1 in kvm_cpu_exec
->
-> > > > > (cpu=cpu@entry=0x56121849aa00) at
->
-> > > > > /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
->
-> > > > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
->
-> > > > > (arg=arg@entry=0x56121849aa00) at
->
-> > > > > /usr/src/debug/qemu-4.0/cpus.c:1281
->
-> > > > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>)
->
-> > > > > at /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
->
-> > > > > #11 0x00007fce7bef6e25 in start_thread () from
->
-> > > > > /lib64/libpthread.so.0
->
-> > > > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
->
-> > > > >
->
-> > > > > And I searched and found
->
-> > > > >
-https://bugzilla.redhat.com/show_bug.cgi?id=1706759
-, which has the
->
-> > > > > same
->
-> > > > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk:
->
-> > > > > Add
->
-> > > > > blk_drain() to virtio_blk_device_unrealize()") is to fix this
->
-> > > > > particular
->
-> > > > > bug.
->
-> > > > >
->
-> > > > > But I can still hit the bug even after applying the commit. Do I
->
-> > > > > miss
->
-> > > > > anything?
->
-> > > >
->
-> > > > Hi Eryu,
->
-> > > > This backtrace seems to be caused by this bug (there were two bugs in
->
-> > > > 1706759):
-https://bugzilla.redhat.com/show_bug.cgi?id=1708480
->
-> > > > Although the solution hasn't been tested on virtio-blk yet, you may
->
-> > > > want to apply this patch:
->
-> > > >
->
-> > > >
-https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
->
-> > > > Let me know if this works.
->
-> > >
->
-> > > Unfortunately, I still see the same segfault & backtrace after applying
->
-> > > commit 421afd2fe8dd ("virtio: reset region cache when on queue
->
-> > > deletion")
->
-> > >
->
-> > > Anything I can help to debug?
->
-> >
->
-> > Please post the QEMU command-line and the QMP commands use to remove the
->
-> > device.
->
->
->
-> It's a normal kata instance using virtio-fs as rootfs.
->
->
->
-> /usr/local/libexec/qemu-kvm -name
->
-> sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
->
->  -uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine
->
-> q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
->
->  -cpu host -qmp
->
-> unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
->
->  \
->
->  -qmp
->
-> unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
->
->  \
->
->  -m 2048M,slots=10,maxmem=773893M -device
->
-> pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
->
->  -device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device
->
-> virtconsole,chardev=charconsole0,id=console0 \
->
->  -chardev
->
-> socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
->
->  \
->
->  -device
->
-> virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10
->
->  \
->
->  -chardev
->
-> socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
->
->  \
->
->  -device nvdimm,id=nv0,memdev=mem0 -object
->
-> memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
->
->  \
->
->  -object rng-random,id=rng0,filename=/dev/urandom -device
->
-> virtio-rng,rng=rng0,romfile= \
->
->  -device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
->
->  -chardev
->
-> socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
->
->  \
->
->  -chardev
->
-> socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
->
->  \
->
->  -device
->
-> vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M
->
->  -netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
->
->  -device
->
-> driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
->
->  \
->
->  -global kvm-pit.lost_tick_policy=discard -vga none -no-user-config
->
-> -nodefaults -nographic -daemonize \
->
->  -object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on
->
-> -numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
->
->  -append tsc=reliable no_timer_check rcupdate.rcu_expedited=1
->
-> i8042.direct=1 i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp
->
-> reboot=k console=hvc0 console=hvc1 iommu=off cryptomgr.notests
->
-> net.ifnames=0 pci=lastbus=0 root=/dev/pmem0p1
->
-> rootflags=dax,data=ordered,errors=remount-ro ro rootfstype=ext4 quiet
->
-> systemd.show_status=false panic=1 nr_cpus=96 agent.use_vsock=false
->
-> init=/usr/lib/systemd/systemd systemd.unit=kata-containers.target
->
-> systemd.mask=systemd-networkd.service systemd.mask=systemd-networkd.socket \
->
->  -pidfile
->
-> /run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid
->
->  \
->
->  -smp 1,cores=1,threads=1,sockets=96,maxcpus=96
->
->
->
-> QMP command to delete device (the device id is just an example, not the
->
-> one caused the crash):
->
->
->
-> "{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
->
->
->
-> which has been hot plugged by:
->
-> "{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
->
-> "{\"return\": {}}"
->
-> "{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
->
-> "{\"return\": {}}"
->
->
-Thanks.  I wasn't able to reproduce this crash with qemu.git/master.
->
->
-One thing that is strange about the latest backtrace you posted: QEMU is
->
-dispatching the memory access instead of using the ioeventfd code that
->
-that virtio-blk-pci normally takes when a virtqueue is notified.  I
->
-guess this means ioeventfd has already been disabled due to the hot
->
-unplug.
->
->
-Could you try with machine type "i440fx" instead of "q35"?  I wonder if
->
-pci-bridge/shpc is part of the problem.
-Sure, will try it. But it may take some time, as the test bed is busy
-with other testing tasks. I'll report back once I got the results.
-
-Thanks,
-Eryu
-
diff --git a/results/classifier/005/other/88281850 b/results/classifier/005/other/88281850
deleted file mode 100644
index 10bfcf8b..00000000
--- a/results/classifier/005/other/88281850
+++ /dev/null
@@ -1,289 +0,0 @@
-other: 0.983
-instruction: 0.978
-graphic: 0.974
-network: 0.973
-assembly: 0.972
-device: 0.970
-semantic: 0.968
-boot: 0.967
-socket: 0.966
-mistranslation: 0.948
-vnc: 0.945
-KVM: 0.881
-
-[Bug] Take more 150s to boot qemu on ARM64
-
-Hi all,
-I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes
-about 150s between beginning to run qemu command and beginng to boot
-Linux kernel ("EFI stub: Booting Linux Kernel...").
-But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel
-code and it finds c2445d387850 ("srcu: Add contention check to
-call_srcu() srcu_data ->lock acquisition").
-The qemu (qemu version is 6.2.92) command i run is :
-
-./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
---trace "kvm*" \
--cpu host \
--machine virt,accel=kvm,gic-version=3  \
--machine smp.cpus=2,smp.sockets=2 \
--no-reboot \
--nographic \
--monitor unix:/home/cx/qmp-test,server,nowait \
--bios /home/cx/boot/QEMU_EFI.fd \
--kernel /home/cx/boot/Image  \
--device
-pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
-\
--device vfio-pci,host=7d:01.3,id=net0 \
--device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
--drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
--append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
--net none \
--D /home/cx/qemu_log.txt
-I am not familiar with rcu code, and don't know how it causes the issue.
-Do you have any idea about this issue?
-Best Regard,
-
-Xiang Chen
-
-On Mon, Jun 13, 2022 at 08:26:34PM +0800, chenxiang (M) wrote:
->
-Hi all,
->
->
-I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes about
->
-150s between beginning to run qemu command and beginng to boot Linux kernel
->
-("EFI stub: Booting Linux Kernel...").
->
->
-But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel code
->
-and it finds c2445d387850 ("srcu: Add contention check to call_srcu()
->
-srcu_data ->lock acquisition").
->
->
-The qemu (qemu version is 6.2.92) command i run is :
->
->
-./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
->
---trace "kvm*" \
->
--cpu host \
->
--machine virt,accel=kvm,gic-version=3  \
->
--machine smp.cpus=2,smp.sockets=2 \
->
--no-reboot \
->
--nographic \
->
--monitor unix:/home/cx/qmp-test,server,nowait \
->
--bios /home/cx/boot/QEMU_EFI.fd \
->
--kernel /home/cx/boot/Image  \
->
--device
->
-pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
->
-\
->
--device vfio-pci,host=7d:01.3,id=net0 \
->
--device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
->
--drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
->
--append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
->
--net none \
->
--D /home/cx/qemu_log.txt
->
->
-I am not familiar with rcu code, and don't know how it causes the issue. Do
->
-you have any idea about this issue?
-Please see the discussion here:
-https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
-Though that report requires ACPI to be forced on to get the
-delay, which results in more than 9,000 back-to-back calls to
-synchronize_srcu_expedited().  I cannot reproduce this on my setup, even
-with an artificial tight loop invoking synchronize_srcu_expedited(),
-but then again I don't have ARM hardware.
-
-My current guess is that the following patch, but with larger values for
-SRCU_MAX_NODELAY_PHASE.  Here "larger" might well be up in the hundreds,
-or perhaps even larger.
-
-If you get a chance to experiment with this, could you please reply
-to the discussion at the above URL?  (Or let me know, and I can CC
-you on the next message in that thread.)
-
-                                                Thanx, Paul
-
-------------------------------------------------------------------------
-
-diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
-index 50ba70f019dea..0db7873f4e95b 100644
---- a/kernel/rcu/srcutree.c
-+++ b/kernel/rcu/srcutree.c
-@@ -513,7 +513,7 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
- 
- #define SRCU_INTERVAL          1       // Base delay if no expedited GPs 
-pending.
- #define SRCU_MAX_INTERVAL      10      // Maximum incremental delay from slow 
-readers.
--#define SRCU_MAX_NODELAY_PHASE 1       // Maximum per-GP-phase consecutive 
-no-delay instances.
-+#define SRCU_MAX_NODELAY_PHASE 3       // Maximum per-GP-phase consecutive 
-no-delay instances.
- #define SRCU_MAX_NODELAY       100     // Maximum consecutive no-delay 
-instances.
- 
- /*
-@@ -522,16 +522,22 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
-  */
- static unsigned long srcu_get_delay(struct srcu_struct *ssp)
- {
-+       unsigned long gpstart;
-+       unsigned long j;
-        unsigned long jbase = SRCU_INTERVAL;
- 
-        if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), 
-READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
-                jbase = 0;
--       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)))
--               jbase += jiffies - READ_ONCE(ssp->srcu_gp_start);
--       if (!jbase) {
--               WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
-READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
--               if (READ_ONCE(ssp->srcu_n_exp_nodelay) > SRCU_MAX_NODELAY_PHASE)
--                       jbase = 1;
-+       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq))) {
-+               j = jiffies - 1;
-+               gpstart = READ_ONCE(ssp->srcu_gp_start);
-+               if (time_after(j, gpstart))
-+                       jbase += j - gpstart;
-+               if (!jbase) {
-+                       WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
-READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
-+                       if (READ_ONCE(ssp->srcu_n_exp_nodelay) > 
-SRCU_MAX_NODELAY_PHASE)
-+                               jbase = 1;
-+               }
-        }
-        return jbase > SRCU_MAX_INTERVAL ? SRCU_MAX_INTERVAL : jbase;
- }
-
-在 2022/6/13 21:22, Paul E. McKenney 写道:
-On Mon, Jun 13, 2022 at 08:26:34PM +0800, chenxiang (M) wrote:
-Hi all,
-
-I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes about
-150s between beginning to run qemu command and beginng to boot Linux kernel
-("EFI stub: Booting Linux Kernel...").
-
-But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel code
-and it finds c2445d387850 ("srcu: Add contention check to call_srcu()
-srcu_data ->lock acquisition").
-
-The qemu (qemu version is 6.2.92) command i run is :
-
-./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
---trace "kvm*" \
--cpu host \
--machine virt,accel=kvm,gic-version=3  \
--machine smp.cpus=2,smp.sockets=2 \
--no-reboot \
--nographic \
--monitor unix:/home/cx/qmp-test,server,nowait \
--bios /home/cx/boot/QEMU_EFI.fd \
--kernel /home/cx/boot/Image  \
--device 
-pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
-\
--device vfio-pci,host=7d:01.3,id=net0 \
--device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
--drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
--append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
--net none \
--D /home/cx/qemu_log.txt
-
-I am not familiar with rcu code, and don't know how it causes the issue. Do
-you have any idea about this issue?
-Please see the discussion here:
-https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
-Though that report requires ACPI to be forced on to get the
-delay, which results in more than 9,000 back-to-back calls to
-synchronize_srcu_expedited().  I cannot reproduce this on my setup, even
-with an artificial tight loop invoking synchronize_srcu_expedited(),
-but then again I don't have ARM hardware.
-
-My current guess is that the following patch, but with larger values for
-SRCU_MAX_NODELAY_PHASE.  Here "larger" might well be up in the hundreds,
-or perhaps even larger.
-
-If you get a chance to experiment with this, could you please reply
-to the discussion at the above URL?  (Or let me know, and I can CC
-you on the next message in that thread.)
-Ok, thanks, i will reply it on above URL.
-Thanx, Paul
-
-------------------------------------------------------------------------
-
-diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
-index 50ba70f019dea..0db7873f4e95b 100644
---- a/kernel/rcu/srcutree.c
-+++ b/kernel/rcu/srcutree.c
-@@ -513,7 +513,7 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
-#define SRCU_INTERVAL		1	// Base delay if no expedited GPs pending.
-#define SRCU_MAX_INTERVAL     10      // Maximum incremental delay from slow 
-readers.
--#define SRCU_MAX_NODELAY_PHASE 1       // Maximum per-GP-phase consecutive 
-no-delay instances.
-+#define SRCU_MAX_NODELAY_PHASE 3       // Maximum per-GP-phase consecutive 
-no-delay instances.
-  #define SRCU_MAX_NODELAY      100     // Maximum consecutive no-delay 
-instances.
-/*
-@@ -522,16 +522,22 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
-   */
-  static unsigned long srcu_get_delay(struct srcu_struct *ssp)
-  {
-+       unsigned long gpstart;
-+       unsigned long j;
-        unsigned long jbase = SRCU_INTERVAL;
-if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
-jbase = 0;
--       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)))
--               jbase += jiffies - READ_ONCE(ssp->srcu_gp_start);
--       if (!jbase) {
--               WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
-READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
--               if (READ_ONCE(ssp->srcu_n_exp_nodelay) > SRCU_MAX_NODELAY_PHASE)
--                       jbase = 1;
-+       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq))) {
-+               j = jiffies - 1;
-+               gpstart = READ_ONCE(ssp->srcu_gp_start);
-+               if (time_after(j, gpstart))
-+                       jbase += j - gpstart;
-+               if (!jbase) {
-+                       WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
-READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
-+                       if (READ_ONCE(ssp->srcu_n_exp_nodelay) > 
-SRCU_MAX_NODELAY_PHASE)
-+                               jbase = 1;
-+               }
-        }
-        return jbase > SRCU_MAX_INTERVAL ? SRCU_MAX_INTERVAL : jbase;
-  }
-.
-
diff --git a/results/classifier/005/other/92957605 b/results/classifier/005/other/92957605
deleted file mode 100644
index fe9db1c7..00000000
--- a/results/classifier/005/other/92957605
+++ /dev/null
@@ -1,426 +0,0 @@
-other: 0.997
-semantic: 0.995
-device: 0.993
-socket: 0.993
-instruction: 0.993
-assembly: 0.992
-boot: 0.992
-network: 0.989
-graphic: 0.986
-KVM: 0.982
-vnc: 0.981
-mistranslation: 0.974
-
-[Qemu-devel] Fwd:  [BUG] Failed to compile using gcc7.1
-
-Hi all,
-I encountered the same problem on gcc 7.1.1 and found Qu's mail in
-this list from google search.
-
-Temporarily fix it by specifying the string length in snprintf
-directive. Hope this is helpful to other people encountered the same
-problem.
-
-@@ -1,9 +1,7 @@
----
---- a/block/blkdebug.c
--                 "blkdebug:%s:%s", s->config_file ?: "",
---- a/block/blkverify.c
--                 "blkverify:%s:%s",
---- a/hw/usb/bus.c
--        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
--        snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
---
-+++ b/block/blkdebug.c
-+                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
-+++ b/block/blkverify.c
-+                 "blkverify:%.2038s:%.2038s",
-+++ b/hw/usb/bus.c
-+        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
-+        snprintf(downstream->path, sizeof(downstream->path), "%.12d", portnr);
-
-Tsung-en Hsiao
-
->
-Qu Wenruo Wrote:
->
->
-Hi all,
->
->
-After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
->
->
-The error is:
->
->
-------
->
-CC      block/blkdebug.o
->
-block/blkdebug.c: In function 'blkdebug_refresh_filename':
->
->
-block/blkdebug.c:693:31: error: '%s' directive output may be truncated
->
-writing up to 4095 bytes into a region of size 4086
->
-[-Werror=format-truncation=]
->
->
-"blkdebug:%s:%s", s->config_file ?: "",
->
-^~
->
-In file included from /usr/include/stdio.h:939:0,
->
-from /home/adam/qemu/include/qemu/osdep.h:68,
->
-from block/blkdebug.c:25:
->
->
-/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output 11
->
-or more bytes (assuming 4106) into a destination of size 4096
->
->
-return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
->
-^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->
-__bos (__s), __fmt, __va_arg_pack ());
->
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->
-cc1: all warnings being treated as errors
->
-make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
->
-------
->
->
-It seems that gcc 7 is introducing more restrict check for printf.
->
->
-If using clang, although there are some extra warning, it can at least pass
->
-the compile.
->
->
-Thanks,
->
-Qu
-
-Hi Tsung-en,
-
-On 06/11/2017 04:08 PM, Tsung-en Hsiao wrote:
-Hi all,
-I encountered the same problem on gcc 7.1.1 and found Qu's mail in
-this list from google search.
-
-Temporarily fix it by specifying the string length in snprintf
-directive. Hope this is helpful to other people encountered the same
-problem.
-Thank your for sharing this.
-@@ -1,9 +1,7 @@
----
---- a/block/blkdebug.c
--                 "blkdebug:%s:%s", s->config_file ?: "",
---- a/block/blkverify.c
--                 "blkverify:%s:%s",
---- a/hw/usb/bus.c
--        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
--        snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
---
-+++ b/block/blkdebug.c
-+                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
-It is a rather funny way to silent this warning :) Truncating the
-filename until it fits.
-However I don't think it is the correct way since there is indeed an
-overflow of bs->exact_filename.
-Apparently exact_filename from "block/block_int.h" is defined to hold a
-pathname:
-char exact_filename[PATH_MAX];
-but is used for more than that (for example in blkdebug.c it might use
-until 10+2*PATH_MAX chars).
-I suppose it started as a buffer to hold a pathname then more block
-drivers were added and this buffer ended used differently.
-If it is a multi-purpose buffer one safer option might be to declare it
-as a GString* and use g_string_printf().
-I CC'ed the block folks to have their feedback.
-
-Regards,
-
-Phil.
-+++ b/block/blkverify.c
-+                 "blkverify:%.2038s:%.2038s",
-+++ b/hw/usb/bus.c
-+        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
-+        snprintf(downstream->path, sizeof(downstream->path), "%.12d", portnr);
-
-Tsung-en Hsiao
-Qu Wenruo Wrote:
-
-Hi all,
-
-After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
-
-The error is:
-
-------
- CC      block/blkdebug.o
-block/blkdebug.c: In function 'blkdebug_refresh_filename':
-
-block/blkdebug.c:693:31: error: '%s' directive output may be truncated writing 
-up to 4095 bytes into a region of size 4086 [-Werror=format-truncation=]
-
-                 "blkdebug:%s:%s", s->config_file ?: "",
-                              ^~
-In file included from /usr/include/stdio.h:939:0,
-                from /home/adam/qemu/include/qemu/osdep.h:68,
-                from block/blkdebug.c:25:
-
-/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output 11 or 
-more bytes (assuming 4106) into a destination of size 4096
-
-  return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
-         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       __bos (__s), __fmt, __va_arg_pack ());
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-cc1: all warnings being treated as errors
-make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
-------
-
-It seems that gcc 7 is introducing more restrict check for printf.
-
-If using clang, although there are some extra warning, it can at least pass the 
-compile.
-
-Thanks,
-Qu
-
-On 2017-06-12 05:19, Philippe Mathieu-Daudé wrote:
->
-Hi Tsung-en,
->
->
-On 06/11/2017 04:08 PM, Tsung-en Hsiao wrote:
->
-> Hi all,
->
-> I encountered the same problem on gcc 7.1.1 and found Qu's mail in
->
-> this list from google search.
->
->
->
-> Temporarily fix it by specifying the string length in snprintf
->
-> directive. Hope this is helpful to other people encountered the same
->
-> problem.
->
->
-Thank your for sharing this.
->
->
->
->
-> @@ -1,9 +1,7 @@
->
-> ---
->
-> --- a/block/blkdebug.c
->
-> -                 "blkdebug:%s:%s", s->config_file ?: "",
->
-> --- a/block/blkverify.c
->
-> -                 "blkverify:%s:%s",
->
-> --- a/hw/usb/bus.c
->
-> -        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
->
-> -        snprintf(downstream->path, sizeof(downstream->path), "%d",
->
-> portnr);
->
-> --
->
-> +++ b/block/blkdebug.c
->
-> +                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
->
->
-It is a rather funny way to silent this warning :) Truncating the
->
-filename until it fits.
->
->
-However I don't think it is the correct way since there is indeed an
->
-overflow of bs->exact_filename.
->
->
-Apparently exact_filename from "block/block_int.h" is defined to hold a
->
-pathname:
->
-char exact_filename[PATH_MAX];
->
->
-but is used for more than that (for example in blkdebug.c it might use
->
-until 10+2*PATH_MAX chars).
-In any case, truncating the filenames will do just as much as truncating
-the result: You'll get an unusable filename.
-
->
-I suppose it started as a buffer to hold a pathname then more block
->
-drivers were added and this buffer ended used differently.
->
->
-If it is a multi-purpose buffer one safer option might be to declare it
->
-as a GString* and use g_string_printf().
-What it is supposed to be now is just an information string we can print
-to the user, because strings are nicer than JSON objects. There are some
-commands that take a filename for identifying a block node, but I dream
-we can get rid of them in 3.0...
-
-The right solution is to remove it altogether and have a
-"char *bdrv_filename(BlockDriverState *bs)" function (which generates
-the filename every time it's called). I've been working on this for some
-years now, actually, but it was never pressing enough to get it finished
-(so I never had enough time).
-
-What we can do in the meantime is to not generate a plain filename if it
-won't fit into bs->exact_filename.
-
-(The easiest way to do this probably would be to truncate
-bs->exact_filename back to an empty string if snprintf() returns a value
-greater than or equal to the length of bs->exact_filename.)
-
-What to do about hw/usb/bus.c I don't know (I guess the best solution
-would be to ignore the warning, but I don't suppose that is going to work).
-
-Max
-
->
->
-I CC'ed the block folks to have their feedback.
->
->
-Regards,
->
->
-Phil.
->
->
-> +++ b/block/blkverify.c
->
-> +                 "blkverify:%.2038s:%.2038s",
->
-> +++ b/hw/usb/bus.c
->
-> +        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
->
-> +        snprintf(downstream->path, sizeof(downstream->path), "%.12d",
->
-> portnr);
->
->
->
-> Tsung-en Hsiao
->
->
->
->> Qu Wenruo Wrote:
->
->>
->
->> Hi all,
->
->>
->
->> After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with
->
->> gcc.
->
->>
->
->> The error is:
->
->>
->
->> ------
->
->>  CC      block/blkdebug.o
->
->> block/blkdebug.c: In function 'blkdebug_refresh_filename':
->
->>
->
->> block/blkdebug.c:693:31: error: '%s' directive output may be
->
->> truncated writing up to 4095 bytes into a region of size 4086
->
->> [-Werror=format-truncation=]
->
->>
->
->>                  "blkdebug:%s:%s", s->config_file ?: "",
->
->>                               ^~
->
->> In file included from /usr/include/stdio.h:939:0,
->
->>                 from /home/adam/qemu/include/qemu/osdep.h:68,
->
->>                 from block/blkdebug.c:25:
->
->>
->
->> /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk'
->
->> output 11 or more bytes (assuming 4106) into a destination of size 4096
->
->>
->
->>   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
->
->>          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->
->>        __bos (__s), __fmt, __va_arg_pack ());
->
->>        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->
->> cc1: all warnings being treated as errors
->
->> make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
->
->> ------
->
->>
->
->> It seems that gcc 7 is introducing more restrict check for printf.
->
->>
->
->> If using clang, although there are some extra warning, it can at
->
->> least pass the compile.
->
->>
->
->> Thanks,
->
->> Qu
->
->
-signature.asc
-Description:
-OpenPGP digital signature
-
diff --git a/results/classifier/005/other/95154278 b/results/classifier/005/other/95154278
deleted file mode 100644
index d23c902d..00000000
--- a/results/classifier/005/other/95154278
+++ /dev/null
@@ -1,163 +0,0 @@
-other: 0.953
-device: 0.951
-graphic: 0.950
-vnc: 0.948
-assembly: 0.944
-instruction: 0.938
-semantic: 0.937
-KVM: 0.916
-socket: 0.913
-network: 0.913
-boot: 0.902
-mistranslation: 0.897
-
-[Qemu-devel] [BUG] checkpatch.pl hangs on target/mips/msa_helper.c
-
-If  checkpatch.pl is applied (using switch "-f") on file 
-target/mips/msa_helper.c, it will hang.
-
-There is a workaround for this particular file:
-
-These lines in msa_helper.c:
-
-        uint## BITS ##_t S = _S, T = _T;                            \
-        uint## BITS ##_t as, at, xs, xt, xd;                        \
-
-should be replaced with:
-
-        uint## BITS ## _t S = _S, T = _T;                           \
-        uint## BITS ## _t as, at, xs, xt, xd;                       \
-
-(a space is added after the second "##" in each line)
-
-The workaround is found by partial deleting and undeleting of the code in 
-msa_helper.c in binary search fashion.
-
-This workaround will soon be submitted by me as a patch within a series on misc 
-MIPS issues.
-
-I took a look at checkpatch.pl code, and it looks it is fairly complicated to 
-fix the issue, since it happens in the code segment involving intricate logic 
-conditions.
-
-Regards,
-Aleksandar
-
-On Wed, Jul 04, 2018 at 03:35:18PM +0000, Aleksandar Markovic wrote:
->
-If  checkpatch.pl is applied (using switch "-f") on file
->
-target/mips/msa_helper.c, it will hang.
->
->
-There is a workaround for this particular file:
->
->
-These lines in msa_helper.c:
->
->
-uint## BITS ##_t S = _S, T = _T;                            \
->
-uint## BITS ##_t as, at, xs, xt, xd;                        \
->
->
-should be replaced with:
->
->
-uint## BITS ## _t S = _S, T = _T;                           \
->
-uint## BITS ## _t as, at, xs, xt, xd;                       \
->
->
-(a space is added after the second "##" in each line)
->
->
-The workaround is found by partial deleting and undeleting of the code in
->
-msa_helper.c in binary search fashion.
->
->
-This workaround will soon be submitted by me as a patch within a series on
->
-misc MIPS issues.
->
->
-I took a look at checkpatch.pl code, and it looks it is fairly complicated to
->
-fix the issue, since it happens in the code segment involving intricate logic
->
-conditions.
-Thanks for figuring this out, Aleksandar.  Not sure if anyone else has
-the apetite to fix checkpatch.pl.
-
-Stefan
-signature.asc
-Description:
-PGP signature
-
-On 07/11/2018 09:36 AM, Stefan Hajnoczi wrote:
->
-On Wed, Jul 04, 2018 at 03:35:18PM +0000, Aleksandar Markovic wrote:
->
-> If  checkpatch.pl is applied (using switch "-f") on file
->
-> target/mips/msa_helper.c, it will hang.
->
->
->
-> There is a workaround for this particular file:
->
->
->
-> These lines in msa_helper.c:
->
->
->
->         uint## BITS ##_t S = _S, T = _T;                            \
->
->         uint## BITS ##_t as, at, xs, xt, xd;                        \
->
->
->
-> should be replaced with:
->
->
->
->         uint## BITS ## _t S = _S, T = _T;                           \
->
->         uint## BITS ## _t as, at, xs, xt, xd;                       \
->
->
->
-> (a space is added after the second "##" in each line)
->
->
->
-> The workaround is found by partial deleting and undeleting of the code in
->
-> msa_helper.c in binary search fashion.
->
->
->
-> This workaround will soon be submitted by me as a patch within a series on
->
-> misc MIPS issues.
->
->
->
-> I took a look at checkpatch.pl code, and it looks it is fairly complicated
->
-> to fix the issue, since it happens in the code segment involving intricate
->
-> logic conditions.
->
->
-Thanks for figuring this out, Aleksandar.  Not sure if anyone else has
->
-the apetite to fix checkpatch.pl.
-Anyone else but Paolo ;P
-http://lists.nongnu.org/archive/html/qemu-devel/2018-07/msg01250.html
-signature.asc
-Description:
-OpenPGP digital signature
-
diff --git a/results/classifier/005/other/96782458 b/results/classifier/005/other/96782458
deleted file mode 100644
index dabee5fb..00000000
--- a/results/classifier/005/other/96782458
+++ /dev/null
@@ -1,1007 +0,0 @@
-semantic: 0.984
-other: 0.982
-assembly: 0.982
-boot: 0.980
-socket: 0.976
-vnc: 0.976
-device: 0.974
-instruction: 0.974
-graphic: 0.973
-network: 0.967
-KVM: 0.963
-mistranslation: 0.949
-
-[Qemu-devel] [BUG] Migrate failes between boards with different PMC counts
-
-Hi all,
-
-Recently, I found migration failed when enable vPMU.
-
-migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
-
-As long as enable vPMU, qemu will save / load the
-vmstate_msr_architectural_pmu(msr_global_ctrl) register during the migration.
-But global_ctrl generated based on cpuid(0xA), the number of general-purpose 
-performance
-monitoring counters(PMC) can vary according to Intel SDN. The number of PMC 
-presented
-to vm, does not support configuration currently, it depend on host cpuid, and 
-enable all pmc
-defaultly at KVM. It cause migration to fail between boards with different PMC 
-counts.
-
-The return value of cpuid (0xA) is different dur to cpu, according to Intel 
-SDN，18-10 Vol. 3B:
-
-Note: The number of general-purpose performance monitoring counters (i.e. N in 
-Figure 18-9)
-can vary across processor generations within a processor family, across 
-processor families, or
-could be different depending on the configuration chosen at boot time in the 
-BIOS regarding
-Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom processors; N 
-=4 for processors
-based on the Nehalem microarchitecture; for processors based on the Sandy Bridge
-microarchitecture, N = 4 if Intel Hyper Threading Technology is active and N=8 
-if not active).
-
-Also I found, N=8 if HT is not active based on the broadwell，,
-such as CPU E7-8890 v4 @ 2.20GHz   
-
-# ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
-/data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming 
-tcp::8888
-Completed 100 %
-qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
-qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833: 
-kvm_put_msrs: 
-Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
-Aborted
-
-So make number of pmc configurable to vm ? Any better idea ?
-
-
-Regards,
--Zhuang Yanying
-
-* Zhuangyanying (address@hidden) wrote:
->
-Hi all,
->
->
-Recently, I found migration failed when enable vPMU.
->
->
-migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
->
-As long as enable vPMU, qemu will save / load the
->
-vmstate_msr_architectural_pmu(msr_global_ctrl) register during the migration.
->
-But global_ctrl generated based on cpuid(0xA), the number of general-purpose
->
-performance
->
-monitoring counters(PMC) can vary according to Intel SDN. The number of PMC
->
-presented
->
-to vm, does not support configuration currently, it depend on host cpuid, and
->
-enable all pmc
->
-defaultly at KVM. It cause migration to fail between boards with different
->
-PMC counts.
->
->
-The return value of cpuid (0xA) is different dur to cpu, according to Intel
->
-SDN，18-10 Vol. 3B:
->
->
-Note: The number of general-purpose performance monitoring counters (i.e. N
->
-in Figure 18-9)
->
-can vary across processor generations within a processor family, across
->
-processor families, or
->
-could be different depending on the configuration chosen at boot time in the
->
-BIOS regarding
->
-Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom processors;
->
-N =4 for processors
->
-based on the Nehalem microarchitecture; for processors based on the Sandy
->
-Bridge
->
-microarchitecture, N = 4 if Intel Hyper Threading Technology is active and
->
-N=8 if not active).
->
->
-Also I found, N=8 if HT is not active based on the broadwell，,
->
-such as CPU E7-8890 v4 @ 2.20GHz
->
->
-# ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
->
-/data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
->
-tcp::8888
->
-Completed 100 %
->
-qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
->
-qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-kvm_put_msrs:
->
-Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-Aborted
->
->
-So make number of pmc configurable to vm ? Any better idea ?
-Coincidentally we hit a similar problem a few days ago with -cpu host  - it 
-took me
-quite a while to spot the difference between the machines was the source
-had hyperthreading disabled.
-
-An option to set the number of counters makes sense to me; but I wonder
-how many other options we need as well.  Also, I'm not sure there's any
-easy way for libvirt etc to figure out how many counters a host supports - it's
-not in /proc/cpuinfo.
-
-Dave
-
->
->
-Regards,
->
--Zhuang Yanying
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
->
-* Zhuangyanying (address@hidden) wrote:
->
-> Hi all,
->
->
->
-> Recently, I found migration failed when enable vPMU.
->
->
->
-> migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
->
->
-> As long as enable vPMU, qemu will save / load the
->
-> vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
->
-> migration.
->
-> But global_ctrl generated based on cpuid(0xA), the number of
->
-> general-purpose performance
->
-> monitoring counters(PMC) can vary according to Intel SDN. The number of PMC
->
-> presented
->
-> to vm, does not support configuration currently, it depend on host cpuid,
->
-> and enable all pmc
->
-> defaultly at KVM. It cause migration to fail between boards with different
->
-> PMC counts.
->
->
->
-> The return value of cpuid (0xA) is different dur to cpu, according to Intel
->
-> SDN，18-10 Vol. 3B:
->
->
->
-> Note: The number of general-purpose performance monitoring counters (i.e. N
->
-> in Figure 18-9)
->
-> can vary across processor generations within a processor family, across
->
-> processor families, or
->
-> could be different depending on the configuration chosen at boot time in
->
-> the BIOS regarding
->
-> Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
->
-> processors; N =4 for processors
->
-> based on the Nehalem microarchitecture; for processors based on the Sandy
->
-> Bridge
->
-> microarchitecture, N = 4 if Intel Hyper Threading Technology is active and
->
-> N=8 if not active).
->
->
->
-> Also I found, N=8 if HT is not active based on the broadwell，,
->
-> such as CPU E7-8890 v4 @ 2.20GHz
->
->
->
-> # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
->
-> /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
->
-> tcp::8888
->
-> Completed 100 %
->
-> qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
->
-> qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-> kvm_put_msrs:
->
-> Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-> Aborted
->
->
->
-> So make number of pmc configurable to vm ? Any better idea ?
->
->
-Coincidentally we hit a similar problem a few days ago with -cpu host  - it
->
-took me
->
-quite a while to spot the difference between the machines was the source
->
-had hyperthreading disabled.
->
->
-An option to set the number of counters makes sense to me; but I wonder
->
-how many other options we need as well.  Also, I'm not sure there's any
->
-easy way for libvirt etc to figure out how many counters a host supports -
->
-it's not in /proc/cpuinfo.
-We actually try to avoid /proc/cpuinfo whereever possible. We do direct
-CPUID asm instructions to identify features, and prefer to use
-/sys/devices/system/cpu if that has suitable data
-
-Where do the PMC counts come from originally ? CPUID or something else ?
-
-Regards,
-Daniel
--- 
-|:
-https://berrange.com
--o-
-https://www.flickr.com/photos/dberrange
-:|
-|:
-https://libvirt.org
--o-
-https://fstop138.berrange.com
-:|
-|:
-https://entangle-photo.org
--o-
-https://www.instagram.com/dberrange
-:|
-
-* Daniel P. Berrange (address@hidden) wrote:
->
-On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
->
-> * Zhuangyanying (address@hidden) wrote:
->
-> > Hi all,
->
-> >
->
-> > Recently, I found migration failed when enable vPMU.
->
-> >
->
-> > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
-> >
->
-> > As long as enable vPMU, qemu will save / load the
->
-> > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
->
-> > migration.
->
-> > But global_ctrl generated based on cpuid(0xA), the number of
->
-> > general-purpose performance
->
-> > monitoring counters(PMC) can vary according to Intel SDN. The number of
->
-> > PMC presented
->
-> > to vm, does not support configuration currently, it depend on host cpuid,
->
-> > and enable all pmc
->
-> > defaultly at KVM. It cause migration to fail between boards with
->
-> > different PMC counts.
->
-> >
->
-> > The return value of cpuid (0xA) is different dur to cpu, according to
->
-> > Intel SDN，18-10 Vol. 3B:
->
-> >
->
-> > Note: The number of general-purpose performance monitoring counters (i.e.
->
-> > N in Figure 18-9)
->
-> > can vary across processor generations within a processor family, across
->
-> > processor families, or
->
-> > could be different depending on the configuration chosen at boot time in
->
-> > the BIOS regarding
->
-> > Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
->
-> > processors; N =4 for processors
->
-> > based on the Nehalem microarchitecture; for processors based on the Sandy
->
-> > Bridge
->
-> > microarchitecture, N = 4 if Intel Hyper Threading Technology is active
->
-> > and N=8 if not active).
->
-> >
->
-> > Also I found, N=8 if HT is not active based on the broadwell，,
->
-> > such as CPU E7-8890 v4 @ 2.20GHz
->
-> >
->
-> > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
->
-> > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
->
-> > tcp::8888
->
-> > Completed 100 %
->
-> > qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
->
-> > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-> > kvm_put_msrs:
->
-> > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-> > Aborted
->
-> >
->
-> > So make number of pmc configurable to vm ? Any better idea ?
->
->
->
-> Coincidentally we hit a similar problem a few days ago with -cpu host  - it
->
-> took me
->
-> quite a while to spot the difference between the machines was the source
->
-> had hyperthreading disabled.
->
->
->
-> An option to set the number of counters makes sense to me; but I wonder
->
-> how many other options we need as well.  Also, I'm not sure there's any
->
-> easy way for libvirt etc to figure out how many counters a host supports -
->
-> it's not in /proc/cpuinfo.
->
->
-We actually try to avoid /proc/cpuinfo whereever possible. We do direct
->
-CPUID asm instructions to identify features, and prefer to use
->
-/sys/devices/system/cpu if that has suitable data
->
->
-Where do the PMC counts come from originally ? CPUID or something else ?
-Yes, they're bits 8..15 of CPUID leaf 0xa
-
-Dave
-
->
-Regards,
->
-Daniel
->
---
->
-|:
-https://berrange.com
--o-
-https://www.flickr.com/photos/dberrange
-:|
->
-|:
-https://libvirt.org
--o-
-https://fstop138.berrange.com
-:|
->
-|:
-https://entangle-photo.org
--o-
-https://www.instagram.com/dberrange
-:|
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
-On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
->
-* Daniel P. Berrange (address@hidden) wrote:
->
-> On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
->
-> > * Zhuangyanying (address@hidden) wrote:
->
-> > > Hi all,
->
-> > >
->
-> > > Recently, I found migration failed when enable vPMU.
->
-> > >
->
-> > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
-> > >
->
-> > > As long as enable vPMU, qemu will save / load the
->
-> > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
->
-> > > migration.
->
-> > > But global_ctrl generated based on cpuid(0xA), the number of
->
-> > > general-purpose performance
->
-> > > monitoring counters(PMC) can vary according to Intel SDN. The number of
->
-> > > PMC presented
->
-> > > to vm, does not support configuration currently, it depend on host
->
-> > > cpuid, and enable all pmc
->
-> > > defaultly at KVM. It cause migration to fail between boards with
->
-> > > different PMC counts.
->
-> > >
->
-> > > The return value of cpuid (0xA) is different dur to cpu, according to
->
-> > > Intel SDN，18-10 Vol. 3B:
->
-> > >
->
-> > > Note: The number of general-purpose performance monitoring counters
->
-> > > (i.e. N in Figure 18-9)
->
-> > > can vary across processor generations within a processor family, across
->
-> > > processor families, or
->
-> > > could be different depending on the configuration chosen at boot time
->
-> > > in the BIOS regarding
->
-> > > Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
->
-> > > processors; N =4 for processors
->
-> > > based on the Nehalem microarchitecture; for processors based on the
->
-> > > Sandy Bridge
->
-> > > microarchitecture, N = 4 if Intel Hyper Threading Technology is active
->
-> > > and N=8 if not active).
->
-> > >
->
-> > > Also I found, N=8 if HT is not active based on the broadwell，,
->
-> > > such as CPU E7-8890 v4 @ 2.20GHz
->
-> > >
->
-> > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
->
-> > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
->
-> > > -incoming tcp::8888
->
-> > > Completed 100 %
->
-> > > qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
->
-> > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-> > > kvm_put_msrs:
->
-> > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-> > > Aborted
->
-> > >
->
-> > > So make number of pmc configurable to vm ? Any better idea ?
->
-> >
->
-> > Coincidentally we hit a similar problem a few days ago with -cpu host  -
->
-> > it took me
->
-> > quite a while to spot the difference between the machines was the source
->
-> > had hyperthreading disabled.
->
-> >
->
-> > An option to set the number of counters makes sense to me; but I wonder
->
-> > how many other options we need as well.  Also, I'm not sure there's any
->
-> > easy way for libvirt etc to figure out how many counters a host supports -
->
-> > it's not in /proc/cpuinfo.
->
->
->
-> We actually try to avoid /proc/cpuinfo whereever possible. We do direct
->
-> CPUID asm instructions to identify features, and prefer to use
->
-> /sys/devices/system/cpu if that has suitable data
->
->
->
-> Where do the PMC counts come from originally ? CPUID or something else ?
->
->
-Yes, they're bits 8..15 of CPUID leaf 0xa
-Ok, that's easy enough for libvirt to detect then. More a question of what
-libvirt should then do this with the info....
-
-Regards,
-Daniel
--- 
-|:
-https://berrange.com
--o-
-https://www.flickr.com/photos/dberrange
-:|
-|:
-https://libvirt.org
--o-
-https://fstop138.berrange.com
-:|
-|:
-https://entangle-photo.org
--o-
-https://www.instagram.com/dberrange
-:|
-
->
------Original Message-----
->
-From: Daniel P. Berrange [
-mailto:address@hidden
->
-Sent: Monday, April 24, 2017 6:34 PM
->
-To: Dr. David Alan Gilbert
->
-Cc: Zhuangyanying; Zhanghailiang; wangxin (U); address@hidden;
->
-Gonglei (Arei); Huangzhichao; address@hidden
->
-Subject: Re: [Qemu-devel] [BUG] Migrate failes between boards with different
->
-PMC counts
->
->
-On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
->
-> * Daniel P. Berrange (address@hidden) wrote:
->
-> > On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
->
-> > > * Zhuangyanying (address@hidden) wrote:
->
-> > > > Hi all,
->
-> > > >
->
-> > > > Recently, I found migration failed when enable vPMU.
->
-> > > >
->
-> > > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
-> > > >
->
-> > > > As long as enable vPMU, qemu will save / load the
->
-> > > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
->
-migration.
->
-> > > > But global_ctrl generated based on cpuid(0xA), the number of
->
-> > > > general-purpose performance monitoring counters(PMC) can vary
->
-> > > > according to Intel SDN. The number of PMC presented to vm, does
->
-> > > > not support configuration currently, it depend on host cpuid, and
->
-> > > > enable
->
-all pmc defaultly at KVM. It cause migration to fail between boards with
->
-different PMC counts.
->
-> > > >
->
-> > > > The return value of cpuid (0xA) is different dur to cpu, according to
->
-> > > > Intel
->
-SDN，18-10 Vol. 3B:
->
-> > > >
->
-> > > > Note: The number of general-purpose performance monitoring
->
-> > > > counters (i.e. N in Figure 18-9) can vary across processor
->
-> > > > generations within a processor family, across processor
->
-> > > > families, or could be different depending on the configuration
->
-> > > > chosen at boot time in the BIOS regarding Intel Hyper Threading
->
-> > > > Technology, (e.g. N=2 for 45 nm Intel Atom processors; N =4 for
->
-processors based on the Nehalem microarchitecture; for processors based on
->
-the Sandy Bridge microarchitecture, N = 4 if Intel Hyper Threading Technology
->
-is active and N=8 if not active).
->
-> > > >
->
-> > > > Also I found, N=8 if HT is not active based on the broadwell，,
->
-> > > > such as CPU E7-8890 v4 @ 2.20GHz
->
-> > > >
->
-> > > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m
->
-> > > > 4096 -hda
->
-> > > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
->
-> > > > -incoming tcp::8888 Completed 100 %
->
-> > > > qemu-system-x86_64: error: failed to set MSR 0x38f to
->
-> > > > 0x7000000ff
->
-> > > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-kvm_put_msrs:
->
-> > > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-> > > > Aborted
->
-> > > >
->
-> > > > So make number of pmc configurable to vm ? Any better idea ?
->
-> > >
->
-> > > Coincidentally we hit a similar problem a few days ago with -cpu
->
-> > > host  - it took me quite a while to spot the difference between
->
-> > > the machines was the source had hyperthreading disabled.
->
-> > >
->
-> > > An option to set the number of counters makes sense to me; but I
->
-> > > wonder how many other options we need as well.  Also, I'm not sure
->
-> > > there's any easy way for libvirt etc to figure out how many
->
-> > > counters a host supports - it's not in /proc/cpuinfo.
->
-> >
->
-> > We actually try to avoid /proc/cpuinfo whereever possible. We do
->
-> > direct CPUID asm instructions to identify features, and prefer to
->
-> > use /sys/devices/system/cpu if that has suitable data
->
-> >
->
-> > Where do the PMC counts come from originally ? CPUID or something
->
-else ?
->
->
->
-> Yes, they're bits 8..15 of CPUID leaf 0xa
->
->
-Ok, that's easy enough for libvirt to detect then. More a question of what
->
-libvirt
->
-should then do this with the info....
->
-Do you mean to do a validation at the begining of migration? in 
-qemuMigrationBakeCookie() & qemuMigrationEatCookie(), if the PMC numbers are 
-not equal, just quit migration?
-It maybe a good enough first edition.
-But for a further better edition, maybe it's better to support Heterogeneous 
-migration I think, so we might need to make PMC number configrable, then we 
-need to modify KVM/qemu as well.
-
-Regards,
--Zhuang Yanying
-
-* Zhuangyanying (address@hidden) wrote:
->
->
->
-> -----Original Message-----
->
-> From: Daniel P. Berrange [
-mailto:address@hidden
->
-> Sent: Monday, April 24, 2017 6:34 PM
->
-> To: Dr. David Alan Gilbert
->
-> Cc: Zhuangyanying; Zhanghailiang; wangxin (U); address@hidden;
->
-> Gonglei (Arei); Huangzhichao; address@hidden
->
-> Subject: Re: [Qemu-devel] [BUG] Migrate failes between boards with different
->
-> PMC counts
->
->
->
-> On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
->
-> > * Daniel P. Berrange (address@hidden) wrote:
->
-> > > On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
->
-> > > > * Zhuangyanying (address@hidden) wrote:
->
-> > > > > Hi all,
->
-> > > > >
->
-> > > > > Recently, I found migration failed when enable vPMU.
->
-> > > > >
->
-> > > > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
->
-> > > > >
->
-> > > > > As long as enable vPMU, qemu will save / load the
->
-> > > > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
->
-> migration.
->
-> > > > > But global_ctrl generated based on cpuid(0xA), the number of
->
-> > > > > general-purpose performance monitoring counters(PMC) can vary
->
-> > > > > according to Intel SDN. The number of PMC presented to vm, does
->
-> > > > > not support configuration currently, it depend on host cpuid, and
->
-> > > > > enable
->
-> all pmc defaultly at KVM. It cause migration to fail between boards with
->
-> different PMC counts.
->
-> > > > >
->
-> > > > > The return value of cpuid (0xA) is different dur to cpu, according
->
-> > > > > to Intel
->
-> SDN，18-10 Vol. 3B:
->
-> > > > >
->
-> > > > > Note: The number of general-purpose performance monitoring
->
-> > > > > counters (i.e. N in Figure 18-9) can vary across processor
->
-> > > > > generations within a processor family, across processor
->
-> > > > > families, or could be different depending on the configuration
->
-> > > > > chosen at boot time in the BIOS regarding Intel Hyper Threading
->
-> > > > > Technology, (e.g. N=2 for 45 nm Intel Atom processors; N =4 for
->
-> processors based on the Nehalem microarchitecture; for processors based on
->
-> the Sandy Bridge microarchitecture, N = 4 if Intel Hyper Threading
->
-> Technology
->
-> is active and N=8 if not active).
->
-> > > > >
->
-> > > > > Also I found, N=8 if HT is not active based on the broadwell，,
->
-> > > > > such as CPU E7-8890 v4 @ 2.20GHz
->
-> > > > >
->
-> > > > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m
->
-> > > > > 4096 -hda
->
-> > > > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
->
-> > > > > -incoming tcp::8888 Completed 100 %
->
-> > > > > qemu-system-x86_64: error: failed to set MSR 0x38f to
->
-> > > > > 0x7000000ff
->
-> > > > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
->
-> kvm_put_msrs:
->
-> > > > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
->
-> > > > > Aborted
->
-> > > > >
->
-> > > > > So make number of pmc configurable to vm ? Any better idea ?
->
-> > > >
->
-> > > > Coincidentally we hit a similar problem a few days ago with -cpu
->
-> > > > host  - it took me quite a while to spot the difference between
->
-> > > > the machines was the source had hyperthreading disabled.
->
-> > > >
->
-> > > > An option to set the number of counters makes sense to me; but I
->
-> > > > wonder how many other options we need as well.  Also, I'm not sure
->
-> > > > there's any easy way for libvirt etc to figure out how many
->
-> > > > counters a host supports - it's not in /proc/cpuinfo.
->
-> > >
->
-> > > We actually try to avoid /proc/cpuinfo whereever possible. We do
->
-> > > direct CPUID asm instructions to identify features, and prefer to
->
-> > > use /sys/devices/system/cpu if that has suitable data
->
-> > >
->
-> > > Where do the PMC counts come from originally ? CPUID or something
->
-> else ?
->
-> >
->
-> > Yes, they're bits 8..15 of CPUID leaf 0xa
->
->
->
-> Ok, that's easy enough for libvirt to detect then. More a question of what
->
-> libvirt
->
-> should then do this with the info....
->
->
->
->
-Do you mean to do a validation at the begining of migration? in
->
-qemuMigrationBakeCookie() & qemuMigrationEatCookie(), if the PMC numbers are
->
-not equal, just quit migration?
->
-It maybe a good enough first edition.
->
-But for a further better edition, maybe it's better to support Heterogeneous
->
-migration I think, so we might need to make PMC number configrable, then we
->
-need to modify KVM/qemu as well.
-Yes agreed; the only thing I wanted to check was that libvirt would have enough
-information to be able to use any feature we added to QEMU.
-
-Dave
-
->
-Regards,
->
--Zhuang Yanying
---
-Dr. David Alan Gilbert / address@hidden / Manchester, UK
-
diff --git a/results/classifier/005/semantic/12360755 b/results/classifier/005/semantic/12360755
deleted file mode 100644
index 3e04cfd8..00000000
--- a/results/classifier/005/semantic/12360755
+++ /dev/null
@@ -1,304 +0,0 @@
-semantic: 0.911
-device: 0.902
-graphic: 0.899
-instruction: 0.894
-assembly: 0.893
-other: 0.886
-mistranslation: 0.844
-boot: 0.818
-vnc: 0.810
-socket: 0.805
-KVM: 0.770
-network: 0.738
-
-[Qemu-devel] [BUG] virtio-net linux driver fails to probe on MIPS Malta since 'hw/virtio-pci: fix virtio behaviour'
-
-Hi,
-
-I've bisected the following failure of the virtio_net linux v4.10 driver
-to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
-
-virtio_net virtio0: virtio: device uses modern interface but does not have 
-VIRTIO_F_VERSION_1
-virtio_net: probe of virtio0 failed with error -22
-
-To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
-
-It appears that adding ",disable-modern=on,disable-legacy=off" to the
-virtio-net -device makes it work again.
-
-I presume this should really just work out of the box. Any ideas why it
-isn't?
-
-Cheers
-James
-signature.asc
-Description:
-Digital signature
-
-On 03/17/2017 11:57 PM, James Hogan wrote:
-Hi,
-
-I've bisected the following failure of the virtio_net linux v4.10 driver
-to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
-
-virtio_net virtio0: virtio: device uses modern interface but does not have 
-VIRTIO_F_VERSION_1
-virtio_net: probe of virtio0 failed with error -22
-
-To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
-
-It appears that adding ",disable-modern=on,disable-legacy=off" to the
-virtio-net -device makes it work again.
-
-I presume this should really just work out of the box. Any ideas why it
-isn't?
-Hi,
-
-
-This is strange. This commit changes virtio devices from legacy to virtio 
-"transitional".
-(your command line changes it to legacy)
-Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
-side
-there is nothing new.
-
-Michael, do you have any idea?
-
-Thanks,
-Marcel
-Cheers
-James
-
-On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
->
-On 03/17/2017 11:57 PM, James Hogan wrote:
->
-> Hi,
->
->
->
-> I've bisected the following failure of the virtio_net linux v4.10 driver
->
-> to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
->
->
->
-> virtio_net virtio0: virtio: device uses modern interface but does not have
->
-> VIRTIO_F_VERSION_1
->
-> virtio_net: probe of virtio0 failed with error -22
->
->
->
-> To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
->
->
->
-> It appears that adding ",disable-modern=on,disable-legacy=off" to the
->
-> virtio-net -device makes it work again.
->
->
->
-> I presume this should really just work out of the box. Any ideas why it
->
-> isn't?
->
->
->
->
-Hi,
->
->
->
-This is strange. This commit changes virtio devices from legacy to virtio
->
-"transitional".
->
-(your command line changes it to legacy)
->
-Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU
->
-side
->
-there is nothing new.
->
->
-Michael, do you have any idea?
->
->
-Thanks,
->
-Marcel
-My guess would be firmware mishandling 64 bit BARs - we saw such
-a case on sparc previously. As a result you are probably reading
-all zeroes from features register or something like that.
-Marcel, could you send a patch making the bar 32 bit?
-If that helps we know what the issue is.
-
->
-> Cheers
->
-> James
->
->
-
-On 03/20/2017 05:43 PM, Michael S. Tsirkin wrote:
-On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
-On 03/17/2017 11:57 PM, James Hogan wrote:
-Hi,
-
-I've bisected the following failure of the virtio_net linux v4.10 driver
-to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
-
-virtio_net virtio0: virtio: device uses modern interface but does not have 
-VIRTIO_F_VERSION_1
-virtio_net: probe of virtio0 failed with error -22
-
-To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
-
-It appears that adding ",disable-modern=on,disable-legacy=off" to the
-virtio-net -device makes it work again.
-
-I presume this should really just work out of the box. Any ideas why it
-isn't?
-Hi,
-
-
-This is strange. This commit changes virtio devices from legacy to virtio 
-"transitional".
-(your command line changes it to legacy)
-Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
-side
-there is nothing new.
-
-Michael, do you have any idea?
-
-Thanks,
-Marcel
-My guess would be firmware mishandling 64 bit BARs - we saw such
-a case on sparc previously. As a result you are probably reading
-all zeroes from features register or something like that.
-Marcel, could you send a patch making the bar 32 bit?
-If that helps we know what the issue is.
-Sure,
-
-Thanks,
-Marcel
-Cheers
-James
-
-On 03/20/2017 05:43 PM, Michael S. Tsirkin wrote:
-On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
-On 03/17/2017 11:57 PM, James Hogan wrote:
-Hi,
-
-I've bisected the following failure of the virtio_net linux v4.10 driver
-to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
-
-virtio_net virtio0: virtio: device uses modern interface but does not have 
-VIRTIO_F_VERSION_1
-virtio_net: probe of virtio0 failed with error -22
-
-To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
-
-It appears that adding ",disable-modern=on,disable-legacy=off" to the
-virtio-net -device makes it work again.
-
-I presume this should really just work out of the box. Any ideas why it
-isn't?
-Hi,
-
-
-This is strange. This commit changes virtio devices from legacy to virtio 
-"transitional".
-(your command line changes it to legacy)
-Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
-side
-there is nothing new.
-
-Michael, do you have any idea?
-
-Thanks,
-Marcel
-My guess would be firmware mishandling 64 bit BARs - we saw such
-a case on sparc previously. As a result you are probably reading
-all zeroes from features register or something like that.
-Marcel, could you send a patch making the bar 32 bit?
-If that helps we know what the issue is.
-Hi James,
-
-Can you please check if the below patch fixes the problem?
-Please note it is not a solution.
-
-diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
-index f9b7244..5b4d429 100644
---- a/hw/virtio/virtio-pci.c
-+++ b/hw/virtio/virtio-pci.c
-@@ -1671,9 +1671,7 @@ static void virtio_pci_device_plugged(DeviceState *d, 
-Error **errp)
-         }
-
-         pci_register_bar(&proxy->pci_dev, proxy->modern_mem_bar_idx,
--                         PCI_BASE_ADDRESS_SPACE_MEMORY |
--                         PCI_BASE_ADDRESS_MEM_PREFETCH |
--                         PCI_BASE_ADDRESS_MEM_TYPE_64,
-+                         PCI_BASE_ADDRESS_SPACE_MEMORY,
-                          &proxy->modern_bar);
-
-         proxy->config_cap = virtio_pci_add_mem_cap(proxy, &cfg.cap);
-
-
-Thanks,
-Marcel
-
-Hi Marcel,
-
-On Tue, Mar 21, 2017 at 04:16:58PM +0200, Marcel Apfelbaum wrote:
->
-Can you please check if the below patch fixes the problem?
->
-Please note it is not a solution.
->
->
-diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
->
-index f9b7244..5b4d429 100644
->
---- a/hw/virtio/virtio-pci.c
->
-+++ b/hw/virtio/virtio-pci.c
->
-@@ -1671,9 +1671,7 @@ static void virtio_pci_device_plugged(DeviceState *d,
->
-Error **errp)
->
-}
->
->
-pci_register_bar(&proxy->pci_dev, proxy->modern_mem_bar_idx,
->
--                         PCI_BASE_ADDRESS_SPACE_MEMORY |
->
--                         PCI_BASE_ADDRESS_MEM_PREFETCH |
->
--                         PCI_BASE_ADDRESS_MEM_TYPE_64,
->
-+                         PCI_BASE_ADDRESS_SPACE_MEMORY,
->
-&proxy->modern_bar);
->
->
-proxy->config_cap = virtio_pci_add_mem_cap(proxy, &cfg.cap);
-Sorry for the delay trying this, I was away last week.
-
-No, it doesn't seem to make any difference.
-
-Thanks
-James
-signature.asc
-Description:
-Digital signature
-
diff --git a/results/classifier/005/semantic/gitlab_semantic_addsubps b/results/classifier/005/semantic/gitlab_semantic_addsubps
deleted file mode 100644
index 11861d18..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_addsubps
+++ /dev/null
@@ -1,36 +0,0 @@
-semantic: 0.974
-instruction: 0.931
-device: 0.758
-other: 0.732
-graphic: 0.700
-vnc: 0.544
-assembly: 0.531
-boot: 0.465
-socket: 0.426
-network: 0.393
-mistranslation: 0.299
-KVM: 0.192
-
-x86 SSE/SSE2/SSE3 instruction semantic bugs with NaN
-
-Description of problem
-The result of SSE/SSE2/SSE3 instructions with NaN is different from the CPU. From Intel manual Volume 1 Appendix D.4.2.2, they defined the behavior of such instructions with NaN. But I think QEMU did not implement this semantic exactly because the byte result is different.
-
-Steps to reproduce
-
-Compile this code
-
-void main() {
-    asm("mov rax, 0x000000007fffffff; push rax; mov rax, 0x00000000ffffffff; push rax; movdqu XMM1, [rsp];");
-    asm("mov rax, 0x2e711de7aa46af1a; push rax; mov rax, 0x7fffffff7fffffff; push rax; movdqu XMM2, [rsp];");
-    asm("addsubps xmm1, xmm2");
-}
-
-Execute and compare the result with the CPU. This problem happens with other SSE/SSE2/SSE3 instructions specified in the manual, Volume 1 Appendix D.4.2.2.
-
-CPU xmm1[3] = 0xffffffff
-
-QEMU xmm1[3] = 0x7fffffff
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/semantic/gitlab_semantic_adox b/results/classifier/005/semantic/gitlab_semantic_adox
deleted file mode 100644
index ed838cbd..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_adox
+++ /dev/null
@@ -1,49 +0,0 @@
-semantic: 0.990
-instruction: 0.944
-assembly: 0.913
-graphic: 0.782
-device: 0.776
-vnc: 0.663
-boot: 0.599
-socket: 0.556
-mistranslation: 0.452
-network: 0.426
-other: 0.286
-KVM: 0.240
-
-x86 ADOX and ADCX semantic bug
-Description of problem
-The result of instruction ADOX and ADCX are different from the CPU. The value of one of EFLAGS is different.
-
-Steps to reproduce
-
-Compile this code
-
-
-void main() {
-    asm("push 512; popfq;");
-    asm("mov rax, 0xffffffff84fdbf24");
-    asm("mov rbx, 0xb197d26043bec15d");
-    asm("adox eax, ebx");
-}
-
-
-
-Execute and compare the result with the CPU. This problem happens with ADCX, too (with CF).
-
-CPU
-
-OF = 0
-
-
-QEMU
-
-OF = 1
-
-
-
-
-
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/semantic/gitlab_semantic_bextr b/results/classifier/005/semantic/gitlab_semantic_bextr
deleted file mode 100644
index 04138b62..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_bextr
+++ /dev/null
@@ -1,38 +0,0 @@
-semantic: 0.993
-instruction: 0.944
-assembly: 0.800
-graphic: 0.790
-device: 0.717
-boot: 0.516
-vnc: 0.471
-socket: 0.397
-mistranslation: 0.337
-network: 0.219
-other: 0.099
-KVM: 0.091
-
-x86 BEXTR semantic bug
-Description of problem
-The result of instruction BEXTR is different with from the CPU. The value of destination register is different. I think QEMU does not consider the operand size limit.
-
-Steps to reproduce
-
-Compile this code
-
-void main() {
-    asm("mov rax, 0x17b3693f77fb6e9");
-    asm("mov rbx, 0x8f635a775ad3b9b4");
-    asm("mov rcx, 0xb717b75da9983018");
-    asm("bextr eax, ebx, ecx");
-}
-
-Execute and compare the result with the CPU.
-
-CPU
-RAX = 0x5a
-
-QEMU
-RAX = 0x635a775a
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/semantic/gitlab_semantic_blsi b/results/classifier/005/semantic/gitlab_semantic_blsi
deleted file mode 100644
index d8fbffa2..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_blsi
+++ /dev/null
@@ -1,33 +0,0 @@
-semantic: 0.983
-instruction: 0.964
-graphic: 0.873
-assembly: 0.852
-device: 0.790
-socket: 0.764
-vnc: 0.756
-boot: 0.678
-network: 0.672
-other: 0.609
-mistranslation: 0.606
-KVM: 0.412
-
-x86 BLSI and BLSR semantic bug
-Description of problem
-The result of instruction BLSI and BLSR is different from the CPU. The value of CF is different.
-
-Steps to reproduce
-
-Compile this code
-
-
-void main() {
-    asm("blsi rax, rbx");
-}
-
-
-
-Execute and compare the result with the CPU. The value of CF is exactly the opposite. This problem happens with BLSR, too.
-
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/semantic/gitlab_semantic_blsmsk b/results/classifier/005/semantic/gitlab_semantic_blsmsk
deleted file mode 100644
index 97ed2893..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_blsmsk
+++ /dev/null
@@ -1,40 +0,0 @@
-semantic: 0.987
-instruction: 0.962
-assembly: 0.879
-device: 0.743
-graphic: 0.735
-vnc: 0.612
-socket: 0.607
-mistranslation: 0.603
-boot: 0.585
-network: 0.366
-other: 0.269
-KVM: 0.163
-
-x86 BLSMSK semantic bug
-Description of problem
-The result of instruction BLSMSK is different with from the CPU. The value of CF is different.
-
-Steps to reproduce
-
-Compile this code
-
-void main() {
-    asm("mov rax, 0x65b2e276ad27c67");
-    asm("mov rbx, 0x62f34955226b2b5d");
-    asm("blsmsk eax, ebx");
-}
-
-Execute and compare the result with the CPU.
-
-CPU
-
-CF = 0
-
-
-QEMU
-
-CF = 1
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/semantic/gitlab_semantic_bzhi b/results/classifier/005/semantic/gitlab_semantic_bzhi
deleted file mode 100644
index 476461d9..00000000
--- a/results/classifier/005/semantic/gitlab_semantic_bzhi
+++ /dev/null
@@ -1,51 +0,0 @@
-semantic: 0.920
-graphic: 0.652
-instruction: 0.623
-device: 0.589
-assembly: 0.406
-vnc: 0.287
-boot: 0.220
-network: 0.203
-socket: 0.198
-mistranslation: 0.171
-other: 0.064
-KVM: 0.064
-
-x86 BZHI semantic bug
-Description of problem
-The result of instruction BZHI is different from the CPU. The value of destination register and SF of EFLAGS are different.
-
-Steps to reproduce
-
-Compile this code
-
-
-void main() {
-    asm("mov rax, 0xb1aa9da2fe33fe3");
-    asm("mov rbx, 0x80000000ffffffff");
-    asm("mov rcx, 0xf3fce8829b99a5c6");
-    asm("bzhi rax, rbx, rcx");
-}
-
-
-
-Execute and compare the result with the CPU.
-
-CPU
-
-RAX = 0x0x80000000ffffffff
-SF = 1
-
-
-QEMU
-
-RAX = 0xffffffff
-SF = 0
-
-
-
-
-
-
-Additional information
-This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/005/vnc/11357571 b/results/classifier/005/vnc/11357571
deleted file mode 100644
index 3faedfcb..00000000
--- a/results/classifier/005/vnc/11357571
+++ /dev/null
@@ -1,55 +0,0 @@
-vnc: 0.950
-graphic: 0.915
-device: 0.763
-instruction: 0.758
-network: 0.705
-semantic: 0.694
-other: 0.687
-socket: 0.600
-boot: 0.571
-KVM: 0.516
-mistranslation: 0.516
-assembly: 0.389
-
-[Qemu-devel] [BUG] VNC: client won't send FramebufferUpdateRequest if job in flight is aborted
-
-Hi Gerd, Daniel.
-
-We noticed that if VncSharePolicy was configured with 
-VNC_SHARE_POLICY_FORCE_SHARED mode and
-multiple vnc clients opened vnc connections, some clients could go blank screen 
-at high probability.
-This problem can be reproduced when we regularly reboot suse12sp3 in graphic 
-mode both
-with RealVNC and noVNC client.
-
-Then we dig into it and find out that some clients go blank screen because they 
-don't
-send FramebufferUpdateRequest any more. One step further, we notice that each 
-time
-the job in flight is aborted one client go blank screen.
-
-The bug is triggered in the following procedure.
-Guest reboot => graphic mode switch => graphic_hw_update =>  vga_update_display
-=> vga_draw_graphic (full_update = 1) => dpy_gfx_replace_surface => 
-vnc_dpy_switch =>
-vnc_abort_display_jobs (client may have job in flight) => job removed from the 
-queue
-If one client has vnc job in flight, *vnc_abort_display_jobs* will wait until 
-its job is abandoned.
-This behavior is done in vnc_worker_thread_loop when 'if (job->vs->ioc == NULL 
-|| job->vs->abort == true)'
-branch is taken.
-
-As we can see, *vnc_abort_display_jobs* is intended to do some optimization to 
-avoid unnecessary client update.
-But if client sends FramebufferUpdateRequest for some graphic area and its 
-FramebufferUpdate response job
-is abandoned, the client may wait for the response and never send new 
-FramebufferUpdateRequest, which may
-case the client go blank screen forever.
-
-So I am wondering whether we should drop the *vnc_abort_display_jobs*  
-optimization  or do some trick here
-to push the client to send new FramebufferUpdateRequest. Do you have any idea ?
-
diff --git a/results/classifier/005/vnc/33802194 b/results/classifier/005/vnc/33802194
deleted file mode 100644
index 30fb4c3d..00000000
--- a/results/classifier/005/vnc/33802194
+++ /dev/null
@@ -1,4947 +0,0 @@
-vnc: 0.728
-KVM: 0.725
-instruction: 0.693
-device: 0.691
-mistranslation: 0.687
-assembly: 0.657
-semantic: 0.656
-socket: 0.655
-network: 0.644
-graphic: 0.640
-other: 0.637
-boot: 0.631
-
-[BUG] cxl can not create region
-
-Hi list
-
-I want to test cxl functions in arm64, and found some problems I can't
-figure out.
-
-My test environment:
-
-1. build latest bios from
-https://github.com/tianocore/edk2.git
-master
-branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
-2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
-master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
-support patch:
-https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
-3. build Linux kernel from
-https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
-preview
-branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
-4. build latest ndctl tools from
-https://github.com/pmem/ndctl
-create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
-
-And my qemu test commands:
-sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
-        -cpu max -smp 8 -nographic -no-reboot \
-        -kernel $KERNEL -bios $BIOS_BIN \
-        -drive if=none,file=$ROOTFS,format=qcow2,id=hd \
-        -device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
-nokaslr dyndbg="module cxl* +p"' \
-        -object memory-backend-ram,size=4G,id=mem0 \
-        -numa node,nodeid=0,cpus=0-7,memdev=mem0 \
-        -net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
-        -object
-memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
-\
-        -object
-memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
-\
-        -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
-        -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
-        -device cxl-upstream,bus=root_port0,id=us0 \
-        -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-        -device
-cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
-        -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-        -device
-cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
-        -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-        -device
-cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
-        -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-        -device
-cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
-        -M 
-cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
-
-And I have got two problems.
-1. When I want to create x1 region with command: "cxl create-region -d
-decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
-reference. Crash log:
-
-[  534.697324] cxl_region region0: config state: 0
-[  534.697346] cxl_region region0: probe: -6
-[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
-[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
-[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
-[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
-[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
-[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
-for mem0:decoder3.0 @ 0
-[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
-[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
-0000:0e:00.0 for mem0:decoder3.0 @ 0
-[  534.699405] Unable to handle kernel NULL pointer dereference at
-virtual address 0000000000000000
-[  534.701474] Mem abort info:
-[  534.701994]   ESR = 0x0000000086000004
-[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
-[  534.703616]   SET = 0, FnV = 0
-[  534.704174]   EA = 0, S1PTW = 0
-[  534.704803]   FSC = 0x04: level 0 translation fault
-[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
-[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
-[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
-[  534.710301] Modules linked in:
-[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
-5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
-[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
-[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
-[  534.719190] pc : 0x0
-[  534.719928] lr : commit_store+0x118/0x2cc
-[  534.721007] sp : ffff80000aec3c30
-[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27: ffff0000c0c06b30
-[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24: ffff0000c0a29400
-[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21: ffff0000c0c06800
-[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18: 0000000000000000
-[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd41fe838
-[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
-[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
-[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff0000c0906e80
-[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000aec3bf0
-[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c155a000
-[  534.738878] Call trace:
-[  534.739368]  0x0
-[  534.739713]  dev_attr_store+0x1c/0x30
-[  534.740186]  sysfs_kf_write+0x48/0x58
-[  534.740961]  kernfs_fop_write_iter+0x128/0x184
-[  534.741872]  new_sync_write+0xdc/0x158
-[  534.742706]  vfs_write+0x1ac/0x2a8
-[  534.743440]  ksys_write+0x68/0xf0
-[  534.744328]  __arm64_sys_write+0x1c/0x28
-[  534.745180]  invoke_syscall+0x44/0xf0
-[  534.745989]  el0_svc_common+0x4c/0xfc
-[  534.746661]  do_el0_svc+0x60/0xa8
-[  534.747378]  el0_svc+0x2c/0x78
-[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
-[  534.748919]  el0t_64_sync+0x18c/0x190
-[  534.749629] Code: bad PC value
-[  534.750169] ---[ end trace 0000000000000000 ]---
-
-2. When I want to create x4 region with command: "cxl create-region -d
-decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
-
-cxl region: create_region: region0: failed to set target3 to mem3
-cxl region: cmd_create_region: created 0 regions
-
-And kernel log as below:
-[   60.536663] cxl_region region0: config state: 0
-[   60.536675] cxl_region region0: probe: -6
-[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
-[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
-[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
-[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
-[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
-mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
-[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
-mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
-[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
-mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
-[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
-mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
-[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
-mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
-[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
-mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
-[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
-mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
-[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
-mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
-[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
-mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
-[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
-[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
-for mem0:decoder3.0 @ 0
-[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
-[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
-0000:0e:00.0 for mem0:decoder3.0 @ 0
-[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at 1
-
-I have tried to write sysfs node manually, got same errors.
-
-Hope I can get some helps here.
-
-Bob
-
-On Fri, 5 Aug 2022 10:20:23 +0800
-Bobo WL <lmw.bobo@gmail.com> wrote:
-
->
-Hi list
->
->
-I want to test cxl functions in arm64, and found some problems I can't
->
-figure out.
-Hi Bob,
-
-Glad to see people testing this code.
-
->
->
-My test environment:
->
->
-1. build latest bios from
-https://github.com/tianocore/edk2.git
-master
->
-branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
->
-2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
->
-master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
->
-support patch:
->
-https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
->
-3. build Linux kernel from
->
-https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
-preview
->
-branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
->
-4. build latest ndctl tools from
-https://github.com/pmem/ndctl
->
-create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
->
->
-And my qemu test commands:
->
-sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
->
--cpu max -smp 8 -nographic -no-reboot \
->
--kernel $KERNEL -bios $BIOS_BIN \
->
--drive if=none,file=$ROOTFS,format=qcow2,id=hd \
->
--device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
->
-nokaslr dyndbg="module cxl* +p"' \
->
--object memory-backend-ram,size=4G,id=mem0 \
->
--numa node,nodeid=0,cpus=0-7,memdev=mem0 \
->
--net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
->
--object
->
-memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
->
-\
->
--device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
->
--device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
-Probably not related to your problem, but there is a disconnect in QEMU /
-kernel assumptionsaround the presence of an HDM decoder when a HB only
-has a single root port. Spec allows it to be provided or not as an 
-implementation choice.
-Kernel assumes it isn't provide. Qemu assumes it is.
-
-The temporary solution is to throw in a second root port on the HB and not
-connect anything to it.  Longer term I may special case this so that the 
-particular
-decoder defaults to pass through settings in QEMU if there is only one root 
-port.
-
->
--device cxl-upstream,bus=root_port0,id=us0 \
->
--device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
->
--device
->
-cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
->
--device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
->
--device
->
-cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
->
--device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
->
--device
->
-cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
->
--device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
->
--device
->
-cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
->
--M
->
-cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
->
->
-And I have got two problems.
->
-1. When I want to create x1 region with command: "cxl create-region -d
->
-decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
->
-reference. Crash log:
->
->
-[  534.697324] cxl_region region0: config state: 0
->
-[  534.697346] cxl_region region0: probe: -6
-Seems odd this is up here.  But maybe fine.
-
->
-[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
->
-[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
->
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
->
-[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
->
-[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
->
-[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
->
-[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
->
-for mem0:decoder3.0 @ 0
->
-[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
->
-[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
->
-0000:0e:00.0 for mem0:decoder3.0 @ 0
->
-[  534.699405] Unable to handle kernel NULL pointer dereference at
->
-virtual address 0000000000000000
->
-[  534.701474] Mem abort info:
->
-[  534.701994]   ESR = 0x0000000086000004
->
-[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
->
-[  534.703616]   SET = 0, FnV = 0
->
-[  534.704174]   EA = 0, S1PTW = 0
->
-[  534.704803]   FSC = 0x04: level 0 translation fault
->
-[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
->
-[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
->
-[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
->
-[  534.710301] Modules linked in:
->
-[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
->
-5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
->
-[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
->
-[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
->
-[  534.719190] pc : 0x0
->
-[  534.719928] lr : commit_store+0x118/0x2cc
->
-[  534.721007] sp : ffff80000aec3c30
->
-[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27:
->
-ffff0000c0c06b30
->
-[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24:
->
-ffff0000c0a29400
->
-[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21:
->
-ffff0000c0c06800
->
-[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18:
->
-0000000000000000
->
-[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15:
->
-0000ffffd41fe838
->
-[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12:
->
-0000000000000000
->
-[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 :
->
-0000000000000000
->
-[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 :
->
-ffff0000c0906e80
->
-[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
->
-ffff80000aec3bf0
->
-[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
->
-ffff0000c155a000
->
-[  534.738878] Call trace:
->
-[  534.739368]  0x0
->
-[  534.739713]  dev_attr_store+0x1c/0x30
->
-[  534.740186]  sysfs_kf_write+0x48/0x58
->
-[  534.740961]  kernfs_fop_write_iter+0x128/0x184
->
-[  534.741872]  new_sync_write+0xdc/0x158
->
-[  534.742706]  vfs_write+0x1ac/0x2a8
->
-[  534.743440]  ksys_write+0x68/0xf0
->
-[  534.744328]  __arm64_sys_write+0x1c/0x28
->
-[  534.745180]  invoke_syscall+0x44/0xf0
->
-[  534.745989]  el0_svc_common+0x4c/0xfc
->
-[  534.746661]  do_el0_svc+0x60/0xa8
->
-[  534.747378]  el0_svc+0x2c/0x78
->
-[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
->
-[  534.748919]  el0t_64_sync+0x18c/0x190
->
-[  534.749629] Code: bad PC value
->
-[  534.750169] ---[ end trace 0000000000000000 ]---
->
->
-2. When I want to create x4 region with command: "cxl create-region -d
->
-decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
->
->
-cxl region: create_region: region0: failed to set target3 to mem3
->
-cxl region: cmd_create_region: created 0 regions
->
->
-And kernel log as below:
->
-[   60.536663] cxl_region region0: config state: 0
->
-[   60.536675] cxl_region region0: probe: -6
->
-[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
->
-[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
->
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
->
-[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
->
-[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
->
-[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
->
-mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
->
-[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
->
-[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
->
-[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
->
-mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
->
-[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
->
-[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
->
-[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
->
-mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
->
-[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
->
-[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
->
-[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
->
-[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
->
-for mem0:decoder3.0 @ 0
->
-[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
-This looks like off by 1 that should be fixed in the below mentioned
-cxl/pending branch.  That ig should be 256.  Note the fix was
-for a test case with a fat HB and no switch, but certainly looks
-like this is the same issue.
-
->
-[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
->
-0000:0e:00.0 for mem0:decoder3.0 @ 0
->
-[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at
->
-1
->
->
-I have tried to write sysfs node manually, got same errors.
-When stepping through by hand, which sysfs write triggers the crash above?
-
-Not sure it's related, but I've just sent out a fix to the
-target register handling in QEMU.
-20220808122051.14822-1-Jonathan.Cameron@huawei.com
-/T/#m47ff985412ce44559e6b04d677c302f8cd371330">https://lore.kernel.org/linux-cxl/
-20220808122051.14822-1-Jonathan.Cameron@huawei.com
-/T/#m47ff985412ce44559e6b04d677c302f8cd371330
-I did have one instance last week of triggering what looked to be a race 
-condition but
-the stack trace doesn't looks related to what you've hit.
-
-It will probably be a few days before I have time to take a look at replicating
-what you have seen.
-
-If you have time, try using the kernel.org cxl/pending branch as there are
-a few additional fixes on there since you sent this email.  Optimistic to hope
-this is covered by one of those, but at least it will mean we are trying to 
-replicate
-on same branch.
-
-Jonathan
-
-
->
->
-Hope I can get some helps here.
->
->
-Bob
-
-Hi Jonathan
-
-Thanks for your reply!
-
-On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
-<Jonathan.Cameron@huawei.com> wrote:
->
->
-Probably not related to your problem, but there is a disconnect in QEMU /
->
-kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-has a single root port. Spec allows it to be provided or not as an
->
-implementation choice.
->
-Kernel assumes it isn't provide. Qemu assumes it is.
->
->
-The temporary solution is to throw in a second root port on the HB and not
->
-connect anything to it.  Longer term I may special case this so that the
->
-particular
->
-decoder defaults to pass through settings in QEMU if there is only one root
->
-port.
->
-You are right! After adding an extra HB in qemu, I can create a x1
-region successfully.
-But have some errors in Nvdimm:
-
-[   74.925838] Unknown online node for memory at 0x10000000000, assuming node 0
-[   74.925846] Unknown target node for memory at 0x10000000000, assuming node 0
-[   74.927470] nd_region region0: nmem0: is disabled, failing probe
-
-And x4 region still failed with same errors, using latest cxl/preview
-branch don't work.
-I have picked "Two CXL emulation fixes" patches in qemu, still not working.
-
-Bob
-
-On Tue, 9 Aug 2022 21:07:06 +0800
-Bobo WL <lmw.bobo@gmail.com> wrote:
-
->
-Hi Jonathan
->
->
-Thanks for your reply!
->
->
-On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-<Jonathan.Cameron@huawei.com> wrote:
->
->
->
-> Probably not related to your problem, but there is a disconnect in QEMU /
->
-> kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-> has a single root port. Spec allows it to be provided or not as an
->
-> implementation choice.
->
-> Kernel assumes it isn't provide. Qemu assumes it is.
->
->
->
-> The temporary solution is to throw in a second root port on the HB and not
->
-> connect anything to it.  Longer term I may special case this so that the
->
-> particular
->
-> decoder defaults to pass through settings in QEMU if there is only one root
->
-> port.
->
->
->
->
-You are right! After adding an extra HB in qemu, I can create a x1
->
-region successfully.
->
-But have some errors in Nvdimm:
->
->
-[   74.925838] Unknown online node for memory at 0x10000000000, assuming node > 0
->
-[   74.925846] Unknown target node for memory at 0x10000000000, assuming node > 0
->
-[   74.927470] nd_region region0: nmem0: is disabled, failing probe
-Ah. I've seen this one, but not chased it down yet.  Was on my todo list to 
-chase
-down. Once I reach this state I can verify the HDM Decode is correct which is 
-what
-I've been using to test (Which wasn't true until earlier this week). 
-I'm currently testing via devmem, more for historical reasons than because it 
-makes
-that much sense anymore.  
-
->
->
-And x4 region still failed with same errors, using latest cxl/preview
->
-branch don't work.
->
-I have picked "Two CXL emulation fixes" patches in qemu, still not working.
->
->
-Bob
-
-On Tue, 9 Aug 2022 17:08:25 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Tue, 9 Aug 2022 21:07:06 +0800
->
-Bobo WL <lmw.bobo@gmail.com> wrote:
->
->
-> Hi Jonathan
->
->
->
-> Thanks for your reply!
->
->
->
-> On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> <Jonathan.Cameron@huawei.com> wrote:
->
-> >
->
-> > Probably not related to your problem, but there is a disconnect in QEMU /
->
-> > kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-> > has a single root port. Spec allows it to be provided or not as an
->
-> > implementation choice.
->
-> > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> >
->
-> > The temporary solution is to throw in a second root port on the HB and not
->
-> > connect anything to it.  Longer term I may special case this so that the
->
-> > particular
->
-> > decoder defaults to pass through settings in QEMU if there is only one
->
-> > root port.
->
-> >
->
->
->
-> You are right! After adding an extra HB in qemu, I can create a x1
->
-> region successfully.
->
-> But have some errors in Nvdimm:
->
->
->
-> [   74.925838] Unknown online node for memory at 0x10000000000, assuming
->
-> node 0
->
-> [   74.925846] Unknown target node for memory at 0x10000000000, assuming
->
-> node 0
->
-> [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
->
-Ah. I've seen this one, but not chased it down yet.  Was on my todo list to
->
-chase
->
-down. Once I reach this state I can verify the HDM Decode is correct which is
->
-what
->
-I've been using to test (Which wasn't true until earlier this week).
->
-I'm currently testing via devmem, more for historical reasons than because it
->
-makes
->
-that much sense anymore.
-*embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
-I'd forgotten that was still on the todo list. I don't think it will
-be particularly hard to do and will take a look in next few days.
-
-Very very indirectly this error is causing a driver probe fail that means that
-we hit a code path that has a rather odd looking check on NDD_LABELING.
-Should not have gotten near that path though - hence the problem is actually
-when we call cxl_pmem_get_config_data() and it returns an error because
-we haven't fully connected up the command in QEMU.
-
-Jonathan
-
-
->
->
->
->
-> And x4 region still failed with same errors, using latest cxl/preview
->
-> branch don't work.
->
-> I have picked "Two CXL emulation fixes" patches in qemu, still not working.
->
->
->
-> Bob
-
-On Thu, 11 Aug 2022 18:08:57 +0100
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
-
->
-On Tue, 9 Aug 2022 17:08:25 +0100
->
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
-> On Tue, 9 Aug 2022 21:07:06 +0800
->
-> Bobo WL <lmw.bobo@gmail.com> wrote:
->
->
->
-> > Hi Jonathan
->
-> >
->
-> > Thanks for your reply!
->
-> >
->
-> > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > <Jonathan.Cameron@huawei.com> wrote:
->
-> > >
->
-> > > Probably not related to your problem, but there is a disconnect in QEMU
->
-> > > /
->
-> > > kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-> > > has a single root port. Spec allows it to be provided or not as an
->
-> > > implementation choice.
->
-> > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > >
->
-> > > The temporary solution is to throw in a second root port on the HB and
->
-> > > not
->
-> > > connect anything to it.  Longer term I may special case this so that
->
-> > > the particular
->
-> > > decoder defaults to pass through settings in QEMU if there is only one
->
-> > > root port.
->
-> > >
->
-> >
->
-> > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > region successfully.
->
-> > But have some errors in Nvdimm:
->
-> >
->
-> > [   74.925838] Unknown online node for memory at 0x10000000000, assuming
->
-> > node 0
->
-> > [   74.925846] Unknown target node for memory at 0x10000000000, assuming
->
-> > node 0
->
-> > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
->
->
-> Ah. I've seen this one, but not chased it down yet.  Was on my todo list to
->
-> chase
->
-> down. Once I reach this state I can verify the HDM Decode is correct which
->
-> is what
->
-> I've been using to test (Which wasn't true until earlier this week).
->
-> I'm currently testing via devmem, more for historical reasons than because
->
-> it makes
->
-> that much sense anymore.
->
->
-*embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-I'd forgotten that was still on the todo list. I don't think it will
->
-be particularly hard to do and will take a look in next few days.
->
->
-Very very indirectly this error is causing a driver probe fail that means that
->
-we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-Should not have gotten near that path though - hence the problem is actually
->
-when we call cxl_pmem_get_config_data() and it returns an error because
->
-we haven't fully connected up the command in QEMU.
-So a least one bug in QEMU. We were not supporting variable length payloads on 
-mailbox
-inputs (but were on outputs).  That hasn't mattered until we get to LSA writes.
-We just need to relax condition on the supplied length.
-
-diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
-index c352a935c4..fdda9529fe 100644
---- a/hw/cxl/cxl-mailbox-utils.c
-+++ b/hw/cxl/cxl-mailbox-utils.c
-@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
-     cxl_cmd = &cxl_cmd_set[set][cmd];
-     h = cxl_cmd->handler;
-     if (h) {
--        if (len == cxl_cmd->in) {
-+        if (len == cxl_cmd->in || !cxl_cmd->in) {
-             cxl_cmd->payload = cxl_dstate->mbox_reg_state +
-                 A_CXL_DEV_CMD_PAYLOAD;
-             ret = (*h)(cxl_cmd, cxl_dstate, &len);
-
-
-This lets the nvdimm/region probe fine, but I'm getting some issues with
-namespace capacity so I'll look at what is causing that next.
-Unfortunately I'm not that familiar with the driver/nvdimm side of things
-so it's take a while to figure out what kicks off what!
-
-Jonathan
-
->
->
-Jonathan
->
->
->
->
->
-> >
->
-> > And x4 region still failed with same errors, using latest cxl/preview
->
-> > branch don't work.
->
-> > I have picked "Two CXL emulation fixes" patches in qemu, still not
->
-> > working.
->
-> >
->
-> > Bob
->
->
-
-Jonathan Cameron wrote:
->
-On Thu, 11 Aug 2022 18:08:57 +0100
->
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
-> On Tue, 9 Aug 2022 17:08:25 +0100
->
-> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
->
-> > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> >
->
-> > > Hi Jonathan
->
-> > >
->
-> > > Thanks for your reply!
->
-> > >
->
-> > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > >
->
-> > > > Probably not related to your problem, but there is a disconnect in
->
-> > > > QEMU /
->
-> > > > kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-> > > > has a single root port. Spec allows it to be provided or not as an
->
-> > > > implementation choice.
->
-> > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > >
->
-> > > > The temporary solution is to throw in a second root port on the HB
->
-> > > > and not
->
-> > > > connect anything to it.  Longer term I may special case this so that
->
-> > > > the particular
->
-> > > > decoder defaults to pass through settings in QEMU if there is only
->
-> > > > one root port.
->
-> > > >
->
-> > >
->
-> > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > region successfully.
->
-> > > But have some errors in Nvdimm:
->
-> > >
->
-> > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > assuming node 0
->
-> > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > assuming node 0
->
-> > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> >
->
-> > Ah. I've seen this one, but not chased it down yet.  Was on my todo list
->
-> > to chase
->
-> > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > which is what
->
-> > I've been using to test (Which wasn't true until earlier this week).
->
-> > I'm currently testing via devmem, more for historical reasons than
->
-> > because it makes
->
-> > that much sense anymore.
->
->
->
-> *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> I'd forgotten that was still on the todo list. I don't think it will
->
-> be particularly hard to do and will take a look in next few days.
->
->
->
-> Very very indirectly this error is causing a driver probe fail that means
->
-> that
->
-> we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> Should not have gotten near that path though - hence the problem is actually
->
-> when we call cxl_pmem_get_config_data() and it returns an error because
->
-> we haven't fully connected up the command in QEMU.
->
->
-So a least one bug in QEMU. We were not supporting variable length payloads
->
-on mailbox
->
-inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-writes.
->
-We just need to relax condition on the supplied length.
->
->
-diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-index c352a935c4..fdda9529fe 100644
->
---- a/hw/cxl/cxl-mailbox-utils.c
->
-+++ b/hw/cxl/cxl-mailbox-utils.c
->
-@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
-cxl_cmd = &cxl_cmd_set[set][cmd];
->
-h = cxl_cmd->handler;
->
-if (h) {
->
--        if (len == cxl_cmd->in) {
->
-+        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
-A_CXL_DEV_CMD_PAYLOAD;
->
-ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
->
->
-This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-namespace capacity so I'll look at what is causing that next.
->
-Unfortunately I'm not that familiar with the driver/nvdimm side of things
->
-so it's take a while to figure out what kicks off what!
-The whirlwind tour is that 'struct nd_region' instances that represent a
-persitent memory address range are composed of one more mappings of
-'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
-in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
-the dimm (if locked) and interrogating the label area to look for
-namespace labels.
-
-The label command calls are routed to the '->ndctl()' callback that was
-registered when the CXL nvdimm_bus_descriptor was created. That callback
-handles both 'bus' scope calls, currently none for CXL, and per nvdimm
-calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
-to CXL commands.
-
-The 'struct nvdimm' objects that the CXL side registers have the
-NDD_LABELING flag set which means that namespaces need to be explicitly
-created / provisioned from region capacity. Otherwise, if
-drivers/nvdimm/dimm.c does not find a namespace-label-index block then
-the region reverts to label-less mode and a default namespace equal to
-the size of the region is instantiated.
-
-If you are seeing small mismatches in namespace capacity then it may
-just be the fact that by default 'ndctl create-namespace' results in an
-'fsdax' mode namespace which just means that it is a block device where
-1.5% of the capacity is reserved for 'struct page' metadata. You should
-be able to see namespace capacity == region capacity by doing "ndctl
-create-namespace -m raw", and disable DAX operation.
-
-Hope that helps.
-
-On Fri, 12 Aug 2022 09:03:02 -0700
-Dan Williams <dan.j.williams@intel.com> wrote:
-
->
-Jonathan Cameron wrote:
->
-> On Thu, 11 Aug 2022 18:08:57 +0100
->
-> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
->
-> > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> >
->
-> > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > >
->
-> > > > Hi Jonathan
->
-> > > >
->
-> > > > Thanks for your reply!
->
-> > > >
->
-> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > >
->
-> > > > > Probably not related to your problem, but there is a disconnect in
->
-> > > > > QEMU /
->
-> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
->
-> > > > > only
->
-> > > > > has a single root port. Spec allows it to be provided or not as an
->
-> > > > > implementation choice.
->
-> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > >
->
-> > > > > The temporary solution is to throw in a second root port on the HB
->
-> > > > > and not
->
-> > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > that the particular
->
-> > > > > decoder defaults to pass through settings in QEMU if there is only
->
-> > > > > one root port.
->
-> > > > >
->
-> > > >
->
-> > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > region successfully.
->
-> > > > But have some errors in Nvdimm:
->
-> > > >
->
-> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > > >
->
-> > >
->
-> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > list to chase
->
-> > > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > > which is what
->
-> > > I've been using to test (Which wasn't true until earlier this week).
->
-> > > I'm currently testing via devmem, more for historical reasons than
->
-> > > because it makes
->
-> > > that much sense anymore.
->
-> >
->
-> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > I'd forgotten that was still on the todo list. I don't think it will
->
-> > be particularly hard to do and will take a look in next few days.
->
-> >
->
-> > Very very indirectly this error is causing a driver probe fail that means
->
-> > that
->
-> > we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> > Should not have gotten near that path though - hence the problem is
->
-> > actually
->
-> > when we call cxl_pmem_get_config_data() and it returns an error because
->
-> > we haven't fully connected up the command in QEMU.
->
->
->
-> So a least one bug in QEMU. We were not supporting variable length payloads
->
-> on mailbox
->
-> inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> writes.
->
-> We just need to relax condition on the supplied length.
->
->
->
-> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> index c352a935c4..fdda9529fe 100644
->
-> --- a/hw/cxl/cxl-mailbox-utils.c
->
-> +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
->      cxl_cmd = &cxl_cmd_set[set][cmd];
->
->      h = cxl_cmd->handler;
->
->      if (h) {
->
-> -        if (len == cxl_cmd->in) {
->
-> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
->              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
->                  A_CXL_DEV_CMD_PAYLOAD;
->
->              ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
->
->
->
->
-> This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-> namespace capacity so I'll look at what is causing that next.
->
-> Unfortunately I'm not that familiar with the driver/nvdimm side of things
->
-> so it's take a while to figure out what kicks off what!
->
->
-The whirlwind tour is that 'struct nd_region' instances that represent a
->
-persitent memory address range are composed of one more mappings of
->
-'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
->
-in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
->
-the dimm (if locked) and interrogating the label area to look for
->
-namespace labels.
->
->
-The label command calls are routed to the '->ndctl()' callback that was
->
-registered when the CXL nvdimm_bus_descriptor was created. That callback
->
-handles both 'bus' scope calls, currently none for CXL, and per nvdimm
->
-calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
->
-to CXL commands.
->
->
-The 'struct nvdimm' objects that the CXL side registers have the
->
-NDD_LABELING flag set which means that namespaces need to be explicitly
->
-created / provisioned from region capacity. Otherwise, if
->
-drivers/nvdimm/dimm.c does not find a namespace-label-index block then
->
-the region reverts to label-less mode and a default namespace equal to
->
-the size of the region is instantiated.
->
->
-If you are seeing small mismatches in namespace capacity then it may
->
-just be the fact that by default 'ndctl create-namespace' results in an
->
-'fsdax' mode namespace which just means that it is a block device where
->
-1.5% of the capacity is reserved for 'struct page' metadata. You should
->
-be able to see namespace capacity == region capacity by doing "ndctl
->
-create-namespace -m raw", and disable DAX operation.
-Currently ndctl create-namespace crashes qemu ;)
-Which isn't ideal!
-
->
->
-Hope that helps.
-Got me looking at the right code. Thanks!
-
-Jonathan
-
-On Fri, 12 Aug 2022 17:15:09 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Fri, 12 Aug 2022 09:03:02 -0700
->
-Dan Williams <dan.j.williams@intel.com> wrote:
->
->
-> Jonathan Cameron wrote:
->
-> > On Thu, 11 Aug 2022 18:08:57 +0100
->
-> > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
-> >
->
-> > > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> > >
->
-> > > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > > >
->
-> > > > > Hi Jonathan
->
-> > > > >
->
-> > > > > Thanks for your reply!
->
-> > > > >
->
-> > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > > >
->
-> > > > > > Probably not related to your problem, but there is a disconnect
->
-> > > > > > in QEMU /
->
-> > > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
->
-> > > > > > only
->
-> > > > > > has a single root port. Spec allows it to be provided or not as
->
-> > > > > > an implementation choice.
->
-> > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > > >
->
-> > > > > > The temporary solution is to throw in a second root port on the
->
-> > > > > > HB and not
->
-> > > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > > that the particular
->
-> > > > > > decoder defaults to pass through settings in QEMU if there is
->
-> > > > > > only one root port.
->
-> > > > > >
->
-> > > > >
->
-> > > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > > region successfully.
->
-> > > > > But have some errors in Nvdimm:
->
-> > > > >
->
-> > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > > assuming node 0
->
-> > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > > assuming node 0
->
-> > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > > > >
->
-> > > >
->
-> > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > > list to chase
->
-> > > > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > > > which is what
->
-> > > > I've been using to test (Which wasn't true until earlier this week).
->
-> > > > I'm currently testing via devmem, more for historical reasons than
->
-> > > > because it makes
->
-> > > > that much sense anymore.
->
-> > >
->
-> > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > > I'd forgotten that was still on the todo list. I don't think it will
->
-> > > be particularly hard to do and will take a look in next few days.
->
-> > >
->
-> > > Very very indirectly this error is causing a driver probe fail that
->
-> > > means that
->
-> > > we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> > > Should not have gotten near that path though - hence the problem is
->
-> > > actually
->
-> > > when we call cxl_pmem_get_config_data() and it returns an error because
->
-> > > we haven't fully connected up the command in QEMU.
->
-> >
->
-> > So a least one bug in QEMU. We were not supporting variable length
->
-> > payloads on mailbox
->
-> > inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> > writes.
->
-> > We just need to relax condition on the supplied length.
->
-> >
->
-> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> > index c352a935c4..fdda9529fe 100644
->
-> > --- a/hw/cxl/cxl-mailbox-utils.c
->
-> > +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
-> >      cxl_cmd = &cxl_cmd_set[set][cmd];
->
-> >      h = cxl_cmd->handler;
->
-> >      if (h) {
->
-> > -        if (len == cxl_cmd->in) {
->
-> > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-> >              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
-> >                  A_CXL_DEV_CMD_PAYLOAD;
->
-> >              ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
-> >
->
-> >
->
-> > This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-> > namespace capacity so I'll look at what is causing that next.
->
-> > Unfortunately I'm not that familiar with the driver/nvdimm side of things
->
-> > so it's take a while to figure out what kicks off what!
->
->
->
-> The whirlwind tour is that 'struct nd_region' instances that represent a
->
-> persitent memory address range are composed of one more mappings of
->
-> 'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
->
-> in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
->
-> the dimm (if locked) and interrogating the label area to look for
->
-> namespace labels.
->
->
->
-> The label command calls are routed to the '->ndctl()' callback that was
->
-> registered when the CXL nvdimm_bus_descriptor was created. That callback
->
-> handles both 'bus' scope calls, currently none for CXL, and per nvdimm
->
-> calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
->
-> to CXL commands.
->
->
->
-> The 'struct nvdimm' objects that the CXL side registers have the
->
-> NDD_LABELING flag set which means that namespaces need to be explicitly
->
-> created / provisioned from region capacity. Otherwise, if
->
-> drivers/nvdimm/dimm.c does not find a namespace-label-index block then
->
-> the region reverts to label-less mode and a default namespace equal to
->
-> the size of the region is instantiated.
->
->
->
-> If you are seeing small mismatches in namespace capacity then it may
->
-> just be the fact that by default 'ndctl create-namespace' results in an
->
-> 'fsdax' mode namespace which just means that it is a block device where
->
-> 1.5% of the capacity is reserved for 'struct page' metadata. You should
->
-> be able to see namespace capacity == region capacity by doing "ndctl
->
-> create-namespace -m raw", and disable DAX operation.
->
->
-Currently ndctl create-namespace crashes qemu ;)
->
-Which isn't ideal!
->
-Found a cause for this one.  Mailbox payload may be as small as 256 bytes.
-We have code in kernel sanity checking that output payload fits in the
-mailbox, but nothing on the input payload.  Symptom is that we write just
-off the end whatever size the payload is.  Note doing this shouldn't crash
-qemu - so I need to fix a range check somewhere.
-
-I think this is because cxl_pmem_get_config_size() returns the mailbox
-payload size as being the available LSA size, forgetting to remove the
-size of the headers on the set_lsa side of things.
-https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git/tree/drivers/cxl/pmem.c?h=next#n110
-I've hacked the max_payload to be -8
-
-Now we still don't succeed in creating the namespace, but bonus is it doesn't 
-crash any more.
-
-
-Jonathan
-
-
-
->
->
->
-> Hope that helps.
->
-Got me looking at the right code. Thanks!
->
->
-Jonathan
->
->
-
-On Mon, 15 Aug 2022 15:18:09 +0100
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
-
->
-On Fri, 12 Aug 2022 17:15:09 +0100
->
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
-> On Fri, 12 Aug 2022 09:03:02 -0700
->
-> Dan Williams <dan.j.williams@intel.com> wrote:
->
->
->
-> > Jonathan Cameron wrote:
->
-> > > On Thu, 11 Aug 2022 18:08:57 +0100
->
-> > > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
-> > >
->
-> > > > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> > > >
->
-> > > > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > > > >
->
-> > > > > > Hi Jonathan
->
-> > > > > >
->
-> > > > > > Thanks for your reply!
->
-> > > > > >
->
-> > > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > > > >
->
-> > > > > > > Probably not related to your problem, but there is a disconnect
->
-> > > > > > > in QEMU /
->
-> > > > > > > kernel assumptionsaround the presence of an HDM decoder when a
->
-> > > > > > > HB only
->
-> > > > > > > has a single root port. Spec allows it to be provided or not as
->
-> > > > > > > an implementation choice.
->
-> > > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > > > >
->
-> > > > > > > The temporary solution is to throw in a second root port on the
->
-> > > > > > > HB and not
->
-> > > > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > > > that the particular
->
-> > > > > > > decoder defaults to pass through settings in QEMU if there is
->
-> > > > > > > only one root port.
->
-> > > > > > >
->
-> > > > > >
->
-> > > > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > > > region successfully.
->
-> > > > > > But have some errors in Nvdimm:
->
-> > > > > >
->
-> > > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > > > assuming node 0
->
-> > > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > > > assuming node 0
->
-> > > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing
->
-> > > > > > probe
->
-> > > > >
->
-> > > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > > > list to chase
->
-> > > > > down. Once I reach this state I can verify the HDM Decode is
->
-> > > > > correct which is what
->
-> > > > > I've been using to test (Which wasn't true until earlier this
->
-> > > > > week).
->
-> > > > > I'm currently testing via devmem, more for historical reasons than
->
-> > > > > because it makes
->
-> > > > > that much sense anymore.
->
-> > > >
->
-> > > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > > > I'd forgotten that was still on the todo list. I don't think it will
->
-> > > > be particularly hard to do and will take a look in next few days.
->
-> > > >
->
-> > > > Very very indirectly this error is causing a driver probe fail that
->
-> > > > means that
->
-> > > > we hit a code path that has a rather odd looking check on
->
-> > > > NDD_LABELING.
->
-> > > > Should not have gotten near that path though - hence the problem is
->
-> > > > actually
->
-> > > > when we call cxl_pmem_get_config_data() and it returns an error
->
-> > > > because
->
-> > > > we haven't fully connected up the command in QEMU.
->
-> > >
->
-> > > So a least one bug in QEMU. We were not supporting variable length
->
-> > > payloads on mailbox
->
-> > > inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> > > writes.
->
-> > > We just need to relax condition on the supplied length.
->
-> > >
->
-> > > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> > > index c352a935c4..fdda9529fe 100644
->
-> > > --- a/hw/cxl/cxl-mailbox-utils.c
->
-> > > +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> > > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
-> > >      cxl_cmd = &cxl_cmd_set[set][cmd];
->
-> > >      h = cxl_cmd->handler;
->
-> > >      if (h) {
->
-> > > -        if (len == cxl_cmd->in) {
->
-> > > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-> > >              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
-> > >                  A_CXL_DEV_CMD_PAYLOAD;
->
-> > >              ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
-> > >
->
-> > >
->
-> > > This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-> > > namespace capacity so I'll look at what is causing that next.
->
-> > > Unfortunately I'm not that familiar with the driver/nvdimm side of
->
-> > > things
->
-> > > so it's take a while to figure out what kicks off what!
->
-> >
->
-> > The whirlwind tour is that 'struct nd_region' instances that represent a
->
-> > persitent memory address range are composed of one more mappings of
->
-> > 'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
->
-> > in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
->
-> > the dimm (if locked) and interrogating the label area to look for
->
-> > namespace labels.
->
-> >
->
-> > The label command calls are routed to the '->ndctl()' callback that was
->
-> > registered when the CXL nvdimm_bus_descriptor was created. That callback
->
-> > handles both 'bus' scope calls, currently none for CXL, and per nvdimm
->
-> > calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
->
-> > to CXL commands.
->
-> >
->
-> > The 'struct nvdimm' objects that the CXL side registers have the
->
-> > NDD_LABELING flag set which means that namespaces need to be explicitly
->
-> > created / provisioned from region capacity. Otherwise, if
->
-> > drivers/nvdimm/dimm.c does not find a namespace-label-index block then
->
-> > the region reverts to label-less mode and a default namespace equal to
->
-> > the size of the region is instantiated.
->
-> >
->
-> > If you are seeing small mismatches in namespace capacity then it may
->
-> > just be the fact that by default 'ndctl create-namespace' results in an
->
-> > 'fsdax' mode namespace which just means that it is a block device where
->
-> > 1.5% of the capacity is reserved for 'struct page' metadata. You should
->
-> > be able to see namespace capacity == region capacity by doing "ndctl
->
-> > create-namespace -m raw", and disable DAX operation.
->
->
->
-> Currently ndctl create-namespace crashes qemu ;)
->
-> Which isn't ideal!
->
->
->
->
-Found a cause for this one.  Mailbox payload may be as small as 256 bytes.
->
-We have code in kernel sanity checking that output payload fits in the
->
-mailbox, but nothing on the input payload.  Symptom is that we write just
->
-off the end whatever size the payload is.  Note doing this shouldn't crash
->
-qemu - so I need to fix a range check somewhere.
->
->
-I think this is because cxl_pmem_get_config_size() returns the mailbox
->
-payload size as being the available LSA size, forgetting to remove the
->
-size of the headers on the set_lsa side of things.
->
-https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git/tree/drivers/cxl/pmem.c?h=next#n110
->
->
-I've hacked the max_payload to be -8
->
->
-Now we still don't succeed in creating the namespace, but bonus is it doesn't
->
-crash any more.
-In the interests of defensive / correct handling from QEMU I took a
-look into why it was crashing.  Turns out that providing a NULL write callback 
-for
-the memory device region (that the above overlarge write was spilling into) 
-isn't
-a safe thing to do.  Needs a stub. Oops.
-
-On plus side we might never have noticed this was going wrong without the crash
-*silver lining in every cloud*
-
-Fix to follow...
-
-Jonathan
-
-
->
->
->
-Jonathan
->
->
->
->
-> >
->
-> > Hope that helps.
->
-> Got me looking at the right code. Thanks!
->
->
->
-> Jonathan
->
->
->
->
->
->
-
-On Mon, 15 Aug 2022 at 15:55, Jonathan Cameron via <qemu-arm@nongnu.org> wrote:
->
-In the interests of defensive / correct handling from QEMU I took a
->
-look into why it was crashing.  Turns out that providing a NULL write
->
-callback for
->
-the memory device region (that the above overlarge write was spilling into)
->
-isn't
->
-a safe thing to do.  Needs a stub. Oops.
-Yeah. We've talked before about adding an assert so that that kind of
-"missing function" bug is caught at device creation rather than only
-if the guest tries to access the device, but we never quite got around
-to it...
-
--- PMM
-
-On Fri, 12 Aug 2022 16:44:03 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Thu, 11 Aug 2022 18:08:57 +0100
->
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
-> On Tue, 9 Aug 2022 17:08:25 +0100
->
-> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
->
-> > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> >
->
-> > > Hi Jonathan
->
-> > >
->
-> > > Thanks for your reply!
->
-> > >
->
-> > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > >
->
-> > > > Probably not related to your problem, but there is a disconnect in
->
-> > > > QEMU /
->
-> > > > kernel assumptionsaround the presence of an HDM decoder when a HB only
->
-> > > > has a single root port. Spec allows it to be provided or not as an
->
-> > > > implementation choice.
->
-> > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > >
->
-> > > > The temporary solution is to throw in a second root port on the HB
->
-> > > > and not
->
-> > > > connect anything to it.  Longer term I may special case this so that
->
-> > > > the particular
->
-> > > > decoder defaults to pass through settings in QEMU if there is only
->
-> > > > one root port.
->
-> > > >
->
-> > >
->
-> > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > region successfully.
->
-> > > But have some errors in Nvdimm:
->
-> > >
->
-> > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > assuming node 0
->
-> > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > assuming node 0
->
-> > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > >
->
-> >
->
-> > Ah. I've seen this one, but not chased it down yet.  Was on my todo list
->
-> > to chase
->
-> > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > which is what
->
-> > I've been using to test (Which wasn't true until earlier this week).
->
-> > I'm currently testing via devmem, more for historical reasons than
->
-> > because it makes
->
-> > that much sense anymore.
->
->
->
-> *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> I'd forgotten that was still on the todo list. I don't think it will
->
-> be particularly hard to do and will take a look in next few days.
->
->
->
-> Very very indirectly this error is causing a driver probe fail that means
->
-> that
->
-> we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> Should not have gotten near that path though - hence the problem is actually
->
-> when we call cxl_pmem_get_config_data() and it returns an error because
->
-> we haven't fully connected up the command in QEMU.
->
->
-So a least one bug in QEMU. We were not supporting variable length payloads
->
-on mailbox
->
-inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-writes.
->
-We just need to relax condition on the supplied length.
->
->
-diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-index c352a935c4..fdda9529fe 100644
->
---- a/hw/cxl/cxl-mailbox-utils.c
->
-+++ b/hw/cxl/cxl-mailbox-utils.c
->
-@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
-cxl_cmd = &cxl_cmd_set[set][cmd];
->
-h = cxl_cmd->handler;
->
-if (h) {
->
--        if (len == cxl_cmd->in) {
->
-+        if (len == cxl_cmd->in || !cxl_cmd->in) {
-Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
-
-With that fixed we hit new fun paths - after some errors we get the
-worrying - not totally sure but looks like a failure on an error cleanup.
-I'll chase down the error source, but even then this is probably triggerable by
-hardware problem or similar.  Some bonus prints in here from me chasing
-error paths, but it's otherwise just cxl/next + the fix I posted earlier today.
-
-[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
-[   69.920108] nd_region_probe
-[   69.920623] ------------[ cut here ]------------
-[   69.920675] refcount_t: addition on 0; use-after-free.
-[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25 
-refcount_warn_saturate+0xa0/0x144
-[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi 
-cxl_core
-[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
-[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
-[   69.931482] Workqueue: events_unbound async_run_entry_fn
-[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
-[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
-[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
-[   69.936541] sp : ffff80000890b960
-[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27: 0000000000000000
-[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24: 0000000000000000
-[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21: ffff0000c5254800
-[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18: ffffffffffffffff
-[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15: 0000000000000000
-[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12: 657466612d657375
-[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffffa54a8f63d288
-[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 00000000fffff31e
-[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 : ffff5ab66e5ef000
-root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 : 
-0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
-[   69.957098] Call trace:
-[   69.957959]  refcount_warn_saturate+0xa0/0x144
-[   69.958773]  get_ndd+0x5c/0x80
-[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
-[   69.960253]  nd_region_probe+0x100/0x290
-[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
-[   69.962087]  really_probe+0x19c/0x3f0
-[   69.962620]  __driver_probe_device+0x11c/0x190
-[   69.963258]  driver_probe_device+0x44/0xf4
-[   69.963773]  __device_attach_driver+0xa4/0x140
-[   69.964471]  bus_for_each_drv+0x84/0xe0
-[   69.965068]  __device_attach+0xb0/0x1f0
-[   69.966101]  device_initial_probe+0x20/0x30
-[   69.967142]  bus_probe_device+0xa4/0xb0
-[   69.968104]  device_add+0x3e8/0x910
-[   69.969111]  nd_async_device_register+0x24/0x74
-[   69.969928]  async_run_entry_fn+0x40/0x150
-[   69.970725]  process_one_work+0x1dc/0x450
-[   69.971796]  worker_thread+0x154/0x450
-[   69.972700]  kthread+0x118/0x120
-[   69.974141]  ret_from_fork+0x10/0x20
-[   69.975141] ---[ end trace 0000000000000000 ]---
-[   70.117887] Into nd_namespace_pmem_set_resource()
-
->
-cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
-A_CXL_DEV_CMD_PAYLOAD;
->
-ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
->
->
-This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-namespace capacity so I'll look at what is causing that next.
->
-Unfortunately I'm not that familiar with the driver/nvdimm side of things
->
-so it's take a while to figure out what kicks off what!
->
->
-Jonathan
->
->
->
->
-> Jonathan
->
->
->
->
->
-> >
->
-> > >
->
-> > > And x4 region still failed with same errors, using latest cxl/preview
->
-> > > branch don't work.
->
-> > > I have picked "Two CXL emulation fixes" patches in qemu, still not
->
-> > > working.
->
-> > >
->
-> > > Bob
->
->
->
->
->
-
-On Mon, 15 Aug 2022 18:04:44 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Fri, 12 Aug 2022 16:44:03 +0100
->
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
-> On Thu, 11 Aug 2022 18:08:57 +0100
->
-> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
->
-> > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> >
->
-> > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > >
->
-> > > > Hi Jonathan
->
-> > > >
->
-> > > > Thanks for your reply!
->
-> > > >
->
-> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > >
->
-> > > > > Probably not related to your problem, but there is a disconnect in
->
-> > > > > QEMU /
->
-> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
->
-> > > > > only
->
-> > > > > has a single root port. Spec allows it to be provided or not as an
->
-> > > > > implementation choice.
->
-> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > >
->
-> > > > > The temporary solution is to throw in a second root port on the HB
->
-> > > > > and not
->
-> > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > that the particular
->
-> > > > > decoder defaults to pass through settings in QEMU if there is only
->
-> > > > > one root port.
->
-> > > > >
->
-> > > >
->
-> > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > region successfully.
->
-> > > > But have some errors in Nvdimm:
->
-> > > >
->
-> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > > >
->
-> > >
->
-> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > list to chase
->
-> > > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > > which is what
->
-> > > I've been using to test (Which wasn't true until earlier this week).
->
-> > > I'm currently testing via devmem, more for historical reasons than
->
-> > > because it makes
->
-> > > that much sense anymore.
->
-> >
->
-> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > I'd forgotten that was still on the todo list. I don't think it will
->
-> > be particularly hard to do and will take a look in next few days.
->
-> >
->
-> > Very very indirectly this error is causing a driver probe fail that means
->
-> > that
->
-> > we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> > Should not have gotten near that path though - hence the problem is
->
-> > actually
->
-> > when we call cxl_pmem_get_config_data() and it returns an error because
->
-> > we haven't fully connected up the command in QEMU.
->
->
->
-> So a least one bug in QEMU. We were not supporting variable length payloads
->
-> on mailbox
->
-> inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> writes.
->
-> We just need to relax condition on the supplied length.
->
->
->
-> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> index c352a935c4..fdda9529fe 100644
->
-> --- a/hw/cxl/cxl-mailbox-utils.c
->
-> +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
->      cxl_cmd = &cxl_cmd_set[set][cmd];
->
->      h = cxl_cmd->handler;
->
->      if (h) {
->
-> -        if (len == cxl_cmd->in) {
->
-> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
-Cause of the error is a failure in GET_LSA.
-Reason, payload length is wrong in QEMU but was hidden previously by my wrong
-fix here.  Probably still a good idea to inject an error in GET_LSA and chase
-down the refcount issue.
-
-
-diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
-index fdda9529fe..e8565fbd6e 100644
---- a/hw/cxl/cxl-mailbox-utils.c
-+++ b/hw/cxl/cxl-mailbox-utils.c
-@@ -489,7 +489,7 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
-         cmd_identify_memory_device, 0, 0 },
-     [CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
-         cmd_ccls_get_partition_info, 0, 0 },
--    [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 0, 0 },
-+    [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 8, 0 },
-     [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa,
-         ~0, IMMEDIATE_CONFIG_CHANGE | IMMEDIATE_DATA_CHANGE },
-     [MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST",
-@@ -510,12 +510,13 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
-     cxl_cmd = &cxl_cmd_set[set][cmd];
-     h = cxl_cmd->handler;
-     if (h) {
--        if (len == cxl_cmd->in || !cxl_cmd->in) {
-+        if (len == cxl_cmd->in || cxl_cmd->in == ~0) {
-             cxl_cmd->payload = cxl_dstate->mbox_reg_state +
-                 A_CXL_DEV_CMD_PAYLOAD;
-
-And woot, we get a namespace in the LSA :)
-
-I'll post QEMU fixes in next day or two.  Kernel side now seems more or less
-fine be it with suspicious refcount underflow.
-
->
->
-With that fixed we hit new fun paths - after some errors we get the
->
-worrying - not totally sure but looks like a failure on an error cleanup.
->
-I'll chase down the error source, but even then this is probably triggerable
->
-by
->
-hardware problem or similar.  Some bonus prints in here from me chasing
->
-error paths, but it's otherwise just cxl/next + the fix I posted earlier
->
-today.
->
->
-[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
->
-[   69.920108] nd_region_probe
->
-[   69.920623] ------------[ cut here ]------------
->
-[   69.920675] refcount_t: addition on 0; use-after-free.
->
-[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
->
-refcount_warn_saturate+0xa0/0x144
->
-[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi
->
-cxl_core
->
-[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
->
-[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
->
-[   69.931482] Workqueue: events_unbound async_run_entry_fn
->
-[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
->
-[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
->
-[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
->
-[   69.936541] sp : ffff80000890b960
->
-[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
->
-0000000000000000
->
-[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
->
-0000000000000000
->
-[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
->
-ffff0000c5254800
->
-[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
->
-ffffffffffffffff
->
-[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
->
-0000000000000000
->
-[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
->
-657466612d657375
->
-[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
->
-ffffa54a8f63d288
->
-[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
->
-00000000fffff31e
->
-[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
->
-ffff5ab66e5ef000
->
-root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
->
-0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
->
-[   69.957098] Call trace:
->
-[   69.957959]  refcount_warn_saturate+0xa0/0x144
->
-[   69.958773]  get_ndd+0x5c/0x80
->
-[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
->
-[   69.960253]  nd_region_probe+0x100/0x290
->
-[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
->
-[   69.962087]  really_probe+0x19c/0x3f0
->
-[   69.962620]  __driver_probe_device+0x11c/0x190
->
-[   69.963258]  driver_probe_device+0x44/0xf4
->
-[   69.963773]  __device_attach_driver+0xa4/0x140
->
-[   69.964471]  bus_for_each_drv+0x84/0xe0
->
-[   69.965068]  __device_attach+0xb0/0x1f0
->
-[   69.966101]  device_initial_probe+0x20/0x30
->
-[   69.967142]  bus_probe_device+0xa4/0xb0
->
-[   69.968104]  device_add+0x3e8/0x910
->
-[   69.969111]  nd_async_device_register+0x24/0x74
->
-[   69.969928]  async_run_entry_fn+0x40/0x150
->
-[   69.970725]  process_one_work+0x1dc/0x450
->
-[   69.971796]  worker_thread+0x154/0x450
->
-[   69.972700]  kthread+0x118/0x120
->
-[   69.974141]  ret_from_fork+0x10/0x20
->
-[   69.975141] ---[ end trace 0000000000000000 ]---
->
-[   70.117887] Into nd_namespace_pmem_set_resource()
->
->
->              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
->
->                  A_CXL_DEV_CMD_PAYLOAD;
->
->              ret = (*h)(cxl_cmd, cxl_dstate, &len);
->
->
->
->
->
-> This lets the nvdimm/region probe fine, but I'm getting some issues with
->
-> namespace capacity so I'll look at what is causing that next.
->
-> Unfortunately I'm not that familiar with the driver/nvdimm side of things
->
-> so it's take a while to figure out what kicks off what!
->
->
->
-> Jonathan
->
->
->
-> >
->
-> > Jonathan
->
-> >
->
-> >
->
-> > >
->
-> > > >
->
-> > > > And x4 region still failed with same errors, using latest cxl/preview
->
-> > > > branch don't work.
->
-> > > > I have picked "Two CXL emulation fixes" patches in qemu, still not
->
-> > > > working.
->
-> > > >
->
-> > > > Bob
->
-> >
->
-> >
->
->
->
-
-Jonathan Cameron wrote:
->
-On Fri, 12 Aug 2022 16:44:03 +0100
->
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
-> On Thu, 11 Aug 2022 18:08:57 +0100
->
-> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
->
-> > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> >
->
-> > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > >
->
-> > > > Hi Jonathan
->
-> > > >
->
-> > > > Thanks for your reply!
->
-> > > >
->
-> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > >
->
-> > > > > Probably not related to your problem, but there is a disconnect in
->
-> > > > > QEMU /
->
-> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
->
-> > > > > only
->
-> > > > > has a single root port. Spec allows it to be provided or not as an
->
-> > > > > implementation choice.
->
-> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > >
->
-> > > > > The temporary solution is to throw in a second root port on the HB
->
-> > > > > and not
->
-> > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > that the particular
->
-> > > > > decoder defaults to pass through settings in QEMU if there is only
->
-> > > > > one root port.
->
-> > > > >
->
-> > > >
->
-> > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > region successfully.
->
-> > > > But have some errors in Nvdimm:
->
-> > > >
->
-> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > assuming node 0
->
-> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > > >
->
-> > >
->
-> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > list to chase
->
-> > > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > > which is what
->
-> > > I've been using to test (Which wasn't true until earlier this week).
->
-> > > I'm currently testing via devmem, more for historical reasons than
->
-> > > because it makes
->
-> > > that much sense anymore.
->
-> >
->
-> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > I'd forgotten that was still on the todo list. I don't think it will
->
-> > be particularly hard to do and will take a look in next few days.
->
-> >
->
-> > Very very indirectly this error is causing a driver probe fail that means
->
-> > that
->
-> > we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> > Should not have gotten near that path though - hence the problem is
->
-> > actually
->
-> > when we call cxl_pmem_get_config_data() and it returns an error because
->
-> > we haven't fully connected up the command in QEMU.
->
->
->
-> So a least one bug in QEMU. We were not supporting variable length payloads
->
-> on mailbox
->
-> inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> writes.
->
-> We just need to relax condition on the supplied length.
->
->
->
-> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> index c352a935c4..fdda9529fe 100644
->
-> --- a/hw/cxl/cxl-mailbox-utils.c
->
-> +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
->      cxl_cmd = &cxl_cmd_set[set][cmd];
->
->      h = cxl_cmd->handler;
->
->      if (h) {
->
-> -        if (len == cxl_cmd->in) {
->
-> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
->
->
-With that fixed we hit new fun paths - after some errors we get the
->
-worrying - not totally sure but looks like a failure on an error cleanup.
->
-I'll chase down the error source, but even then this is probably triggerable
->
-by
->
-hardware problem or similar.  Some bonus prints in here from me chasing
->
-error paths, but it's otherwise just cxl/next + the fix I posted earlier
->
-today.
-One of the scenarios that I cannot rule out is nvdimm_probe() racing
-nd_region_probe(), but given all the work it takes to create a region I
-suspect all the nvdimm_probe() work to have completed...
-
-It is at least one potentially wrong hypothesis that needs to be chased
-down.
-
->
->
-[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
->
-[   69.920108] nd_region_probe
->
-[   69.920623] ------------[ cut here ]------------
->
-[   69.920675] refcount_t: addition on 0; use-after-free.
->
-[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
->
-refcount_warn_saturate+0xa0/0x144
->
-[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi
->
-cxl_core
->
-[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
->
-[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
->
-[   69.931482] Workqueue: events_unbound async_run_entry_fn
->
-[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
->
-[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
->
-[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
->
-[   69.936541] sp : ffff80000890b960
->
-[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
->
-0000000000000000
->
-[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
->
-0000000000000000
->
-[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
->
-ffff0000c5254800
->
-[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
->
-ffffffffffffffff
->
-[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
->
-0000000000000000
->
-[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
->
-657466612d657375
->
-[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
->
-ffffa54a8f63d288
->
-[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
->
-00000000fffff31e
->
-[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
->
-ffff5ab66e5ef000
->
-root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
->
-0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
->
-[   69.957098] Call trace:
->
-[   69.957959]  refcount_warn_saturate+0xa0/0x144
->
-[   69.958773]  get_ndd+0x5c/0x80
->
-[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
->
-[   69.960253]  nd_region_probe+0x100/0x290
->
-[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
->
-[   69.962087]  really_probe+0x19c/0x3f0
->
-[   69.962620]  __driver_probe_device+0x11c/0x190
->
-[   69.963258]  driver_probe_device+0x44/0xf4
->
-[   69.963773]  __device_attach_driver+0xa4/0x140
->
-[   69.964471]  bus_for_each_drv+0x84/0xe0
->
-[   69.965068]  __device_attach+0xb0/0x1f0
->
-[   69.966101]  device_initial_probe+0x20/0x30
->
-[   69.967142]  bus_probe_device+0xa4/0xb0
->
-[   69.968104]  device_add+0x3e8/0x910
->
-[   69.969111]  nd_async_device_register+0x24/0x74
->
-[   69.969928]  async_run_entry_fn+0x40/0x150
->
-[   69.970725]  process_one_work+0x1dc/0x450
->
-[   69.971796]  worker_thread+0x154/0x450
->
-[   69.972700]  kthread+0x118/0x120
->
-[   69.974141]  ret_from_fork+0x10/0x20
->
-[   69.975141] ---[ end trace 0000000000000000 ]---
->
-[   70.117887] Into nd_namespace_pmem_set_resource()
-
-On Mon, 15 Aug 2022 15:55:15 -0700
-Dan Williams <dan.j.williams@intel.com> wrote:
-
->
-Jonathan Cameron wrote:
->
-> On Fri, 12 Aug 2022 16:44:03 +0100
->
-> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
->
-> > On Thu, 11 Aug 2022 18:08:57 +0100
->
-> > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
-> >
->
-> > > On Tue, 9 Aug 2022 17:08:25 +0100
->
-> > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
-> > >
->
-> > > > On Tue, 9 Aug 2022 21:07:06 +0800
->
-> > > > Bobo WL <lmw.bobo@gmail.com> wrote:
->
-> > > >
->
-> > > > > Hi Jonathan
->
-> > > > >
->
-> > > > > Thanks for your reply!
->
-> > > > >
->
-> > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
->
-> > > > > <Jonathan.Cameron@huawei.com> wrote:
->
-> > > > > >
->
-> > > > > > Probably not related to your problem, but there is a disconnect
->
-> > > > > > in QEMU /
->
-> > > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
->
-> > > > > > only
->
-> > > > > > has a single root port. Spec allows it to be provided or not as
->
-> > > > > > an implementation choice.
->
-> > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
->
-> > > > > >
->
-> > > > > > The temporary solution is to throw in a second root port on the
->
-> > > > > > HB and not
->
-> > > > > > connect anything to it.  Longer term I may special case this so
->
-> > > > > > that the particular
->
-> > > > > > decoder defaults to pass through settings in QEMU if there is
->
-> > > > > > only one root port.
->
-> > > > > >
->
-> > > > >
->
-> > > > > You are right! After adding an extra HB in qemu, I can create a x1
->
-> > > > > region successfully.
->
-> > > > > But have some errors in Nvdimm:
->
-> > > > >
->
-> > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
->
-> > > > > assuming node 0
->
-> > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
->
-> > > > > assuming node 0
->
-> > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
->
-> > > > >
->
-> > > >
->
-> > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
->
-> > > > list to chase
->
-> > > > down. Once I reach this state I can verify the HDM Decode is correct
->
-> > > > which is what
->
-> > > > I've been using to test (Which wasn't true until earlier this week).
->
-> > > > I'm currently testing via devmem, more for historical reasons than
->
-> > > > because it makes
->
-> > > > that much sense anymore.
->
-> > >
->
-> > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
->
-> > > I'd forgotten that was still on the todo list. I don't think it will
->
-> > > be particularly hard to do and will take a look in next few days.
->
-> > >
->
-> > > Very very indirectly this error is causing a driver probe fail that
->
-> > > means that
->
-> > > we hit a code path that has a rather odd looking check on NDD_LABELING.
->
-> > > Should not have gotten near that path though - hence the problem is
->
-> > > actually
->
-> > > when we call cxl_pmem_get_config_data() and it returns an error because
->
-> > > we haven't fully connected up the command in QEMU.
->
-> >
->
-> > So a least one bug in QEMU. We were not supporting variable length
->
-> > payloads on mailbox
->
-> > inputs (but were on outputs).  That hasn't mattered until we get to LSA
->
-> > writes.
->
-> > We just need to relax condition on the supplied length.
->
-> >
->
-> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
->
-> > index c352a935c4..fdda9529fe 100644
->
-> > --- a/hw/cxl/cxl-mailbox-utils.c
->
-> > +++ b/hw/cxl/cxl-mailbox-utils.c
->
-> > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
->
-> >      cxl_cmd = &cxl_cmd_set[set][cmd];
->
-> >      h = cxl_cmd->handler;
->
-> >      if (h) {
->
-> > -        if (len == cxl_cmd->in) {
->
-> > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
->
-> Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
->
->
->
-> With that fixed we hit new fun paths - after some errors we get the
->
-> worrying - not totally sure but looks like a failure on an error cleanup.
->
-> I'll chase down the error source, but even then this is probably
->
-> triggerable by
->
-> hardware problem or similar.  Some bonus prints in here from me chasing
->
-> error paths, but it's otherwise just cxl/next + the fix I posted earlier
->
-> today.
->
->
-One of the scenarios that I cannot rule out is nvdimm_probe() racing
->
-nd_region_probe(), but given all the work it takes to create a region I
->
-suspect all the nvdimm_probe() work to have completed...
->
->
-It is at least one potentially wrong hypothesis that needs to be chased
->
-down.
-Maybe there should be a special award for the non-intuitive 
-ndctl create-namespace command (modifies existing namespace and might create
-a different empty one...) I'm sure there is some interesting history behind 
-that one :)
-
-Upshot is I just threw a filesystem on fsdax and wrote some text files on it
-to allow easy grepping. The right data ends up in the memory and a plausible
-namespace description is stored in the LSA.
-
-So to some degree at least it's 'working' on an 8 way direct connected
-set of emulated devices.
-
-One snag is that serial number support isn't yet upstream in QEMU.
-(I have had it in my tree for a while but not posted it yet because of
- QEMU feature freeze)
-https://gitlab.com/jic23/qemu/-/commit/144c783ea8a5fbe169f46ea1ba92940157f42733
-That's needed for meaningful cookie generation.  Otherwise you can build the
-namespace once, but it won't work on next probe as the cookie is 0 and you
-hit some error paths.
-
-Maybe sensible to add a sanity check and fail namespace creation if
-cookie is 0?  (Silly side question, but is there a theoretical risk of
-a serial number / other data combination leading to a fletcher64()
-checksum that happens to be 0 - that would give a very odd bug report!)
-
-So to make it work the following is needed:
-
-1) The kernel fix for mailbox buffer overflow.
-2) Qemu fix for size of arguements for get_lsa
-3) Qemu fix to allow variable size input arguements (for set_lsa)
-4) Serial number patch above + command lines to qemu to set appropriate
-   serial numbers.
-
-I'll send out the QEMU fixes shortly and post the Serial number patch,
-though that almost certainly won't go in until next QEMU development
-cycle starts in a few weeks.
-
-Next up, run through same tests on some other topologies.
-
-Jonathan
-
->
->
->
->
-> [   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
->
-> [   69.920108] nd_region_probe
->
-> [   69.920623] ------------[ cut here ]------------
->
-> [   69.920675] refcount_t: addition on 0; use-after-free.
->
-> [   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
->
-> refcount_warn_saturate+0xa0/0x144
->
-> [   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port
->
-> cxl_acpi cxl_core
->
-> [   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+
->
-> #399
->
-> [   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0
->
-> 02/06/2015
->
-> [   69.931482] Workqueue: events_unbound async_run_entry_fn
->
-> [   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
->
-> BTYPE=--)
->
-> [   69.934023] pc : refcount_warn_saturate+0xa0/0x144
->
-> [   69.935161] lr : refcount_warn_saturate+0xa0/0x144
->
-> [   69.936541] sp : ffff80000890b960
->
-> [   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
->
-> 0000000000000000
->
-> [   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
->
-> 0000000000000000
->
-> [   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
->
-> ffff0000c5254800
->
-> [   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
->
-> ffffffffffffffff
->
-> [   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
->
-> 0000000000000000
->
-> [   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
->
-> 657466612d657375
->
-> [   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
->
-> ffffa54a8f63d288
->
-> [   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
->
-> 00000000fffff31e
->
-> [   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
->
-> ffff5ab66e5ef000
->
-> root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
->
-> 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
->
-> [   69.957098] Call trace:
->
-> [   69.957959]  refcount_warn_saturate+0xa0/0x144
->
-> [   69.958773]  get_ndd+0x5c/0x80
->
-> [   69.959294]  nd_region_register_namespaces+0xe4/0xe90
->
-> [   69.960253]  nd_region_probe+0x100/0x290
->
-> [   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
->
-> [   69.962087]  really_probe+0x19c/0x3f0
->
-> [   69.962620]  __driver_probe_device+0x11c/0x190
->
-> [   69.963258]  driver_probe_device+0x44/0xf4
->
-> [   69.963773]  __device_attach_driver+0xa4/0x140
->
-> [   69.964471]  bus_for_each_drv+0x84/0xe0
->
-> [   69.965068]  __device_attach+0xb0/0x1f0
->
-> [   69.966101]  device_initial_probe+0x20/0x30
->
-> [   69.967142]  bus_probe_device+0xa4/0xb0
->
-> [   69.968104]  device_add+0x3e8/0x910
->
-> [   69.969111]  nd_async_device_register+0x24/0x74
->
-> [   69.969928]  async_run_entry_fn+0x40/0x150
->
-> [   69.970725]  process_one_work+0x1dc/0x450
->
-> [   69.971796]  worker_thread+0x154/0x450
->
-> [   69.972700]  kthread+0x118/0x120
->
-> [   69.974141]  ret_from_fork+0x10/0x20
->
-> [   69.975141] ---[ end trace 0000000000000000 ]---
->
-> [   70.117887] Into nd_namespace_pmem_set_resource()
-
-Bobo WL wrote:
->
-Hi list
->
->
-I want to test cxl functions in arm64, and found some problems I can't
->
-figure out.
->
->
-My test environment:
->
->
-1. build latest bios from
-https://github.com/tianocore/edk2.git
-master
->
-branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
->
-2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
->
-master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
->
-support patch:
->
-https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
->
-3. build Linux kernel from
->
-https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
-preview
->
-branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
->
-4. build latest ndctl tools from
-https://github.com/pmem/ndctl
->
-create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
->
->
-And my qemu test commands:
->
-sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
->
--cpu max -smp 8 -nographic -no-reboot \
->
--kernel $KERNEL -bios $BIOS_BIN \
->
--drive if=none,file=$ROOTFS,format=qcow2,id=hd \
->
--device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
->
-nokaslr dyndbg="module cxl* +p"' \
->
--object memory-backend-ram,size=4G,id=mem0 \
->
--numa node,nodeid=0,cpus=0-7,memdev=mem0 \
->
--net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
->
--object
->
-memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
->
-\
->
--object
->
-memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
->
-\
->
--device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
->
--device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
->
--device cxl-upstream,bus=root_port0,id=us0 \
->
--device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
->
--device
->
-cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
->
--device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
->
--device
->
-cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
->
--device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
->
--device
->
-cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
->
--device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
->
--device
->
-cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
->
--M
->
-cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
->
->
-And I have got two problems.
->
-1. When I want to create x1 region with command: "cxl create-region -d
->
-decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
->
-reference. Crash log:
->
->
-[  534.697324] cxl_region region0: config state: 0
->
-[  534.697346] cxl_region region0: probe: -6
->
-[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
->
-[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
->
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
->
-[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
->
-[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
->
-[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
->
-[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
->
-for mem0:decoder3.0 @ 0
->
-[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
->
-[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
->
-0000:0e:00.0 for mem0:decoder3.0 @ 0
->
-[  534.699405] Unable to handle kernel NULL pointer dereference at
->
-virtual address 0000000000000000
->
-[  534.701474] Mem abort info:
->
-[  534.701994]   ESR = 0x0000000086000004
->
-[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
->
-[  534.703616]   SET = 0, FnV = 0
->
-[  534.704174]   EA = 0, S1PTW = 0
->
-[  534.704803]   FSC = 0x04: level 0 translation fault
->
-[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
->
-[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
->
-[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
->
-[  534.710301] Modules linked in:
->
-[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
->
-5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
->
-[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
->
-[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
->
-[  534.719190] pc : 0x0
->
-[  534.719928] lr : commit_store+0x118/0x2cc
->
-[  534.721007] sp : ffff80000aec3c30
->
-[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27:
->
-ffff0000c0c06b30
->
-[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24:
->
-ffff0000c0a29400
->
-[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21:
->
-ffff0000c0c06800
->
-[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18:
->
-0000000000000000
->
-[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15:
->
-0000ffffd41fe838
->
-[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12:
->
-0000000000000000
->
-[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 :
->
-0000000000000000
->
-[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 :
->
-ffff0000c0906e80
->
-[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
->
-ffff80000aec3bf0
->
-[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
->
-ffff0000c155a000
->
-[  534.738878] Call trace:
->
-[  534.739368]  0x0
->
-[  534.739713]  dev_attr_store+0x1c/0x30
->
-[  534.740186]  sysfs_kf_write+0x48/0x58
->
-[  534.740961]  kernfs_fop_write_iter+0x128/0x184
->
-[  534.741872]  new_sync_write+0xdc/0x158
->
-[  534.742706]  vfs_write+0x1ac/0x2a8
->
-[  534.743440]  ksys_write+0x68/0xf0
->
-[  534.744328]  __arm64_sys_write+0x1c/0x28
->
-[  534.745180]  invoke_syscall+0x44/0xf0
->
-[  534.745989]  el0_svc_common+0x4c/0xfc
->
-[  534.746661]  do_el0_svc+0x60/0xa8
->
-[  534.747378]  el0_svc+0x2c/0x78
->
-[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
->
-[  534.748919]  el0t_64_sync+0x18c/0x190
->
-[  534.749629] Code: bad PC value
->
-[  534.750169] ---[ end trace 0000000000000000 ]---
-What was the top kernel commit when you ran this test? What is the line
-number of "commit_store+0x118"?
-
->
-2. When I want to create x4 region with command: "cxl create-region -d
->
-decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
->
->
-cxl region: create_region: region0: failed to set target3 to mem3
->
-cxl region: cmd_create_region: created 0 regions
->
->
-And kernel log as below:
->
-[   60.536663] cxl_region region0: config state: 0
->
-[   60.536675] cxl_region region0: probe: -6
->
-[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
->
-[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
->
-mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
->
-[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
->
-[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
->
-[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
->
-mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
->
-[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
->
-[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
->
-[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
->
-mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
->
-[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
->
-[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
->
-[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
->
-mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
->
-[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
->
-mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
->
-[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
->
-mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
->
-[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
->
-[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
->
-for mem0:decoder3.0 @ 0
->
-[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
->
-[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
->
-0000:0e:00.0 for mem0:decoder3.0 @ 0
->
-[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at
->
-1
->
->
-I have tried to write sysfs node manually, got same errors.
->
->
-Hope I can get some helps here.
-What is the output of:
-
-    cxl list -MDTu -d decoder0.0
-
-...? It might be the case that mem1 cannot be mapped by decoder0.0, or
-at least not in the specified order, or that validation check is broken.
-
-Hi Dan,
-
-Thanks for your reply!
-
-On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com> wrote:
->
->
-What is the output of:
->
->
-cxl list -MDTu -d decoder0.0
->
->
-...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-at least not in the specified order, or that validation check is broken.
-Command "cxl list -MDTu -d decoder0.0" output:
-
-[
-  {
-    "memdevs":[
-      {
-        "memdev":"mem2",
-        "pmem_size":"256.00 MiB (268.44 MB)",
-        "ram_size":0,
-        "serial":"0",
-        "host":"0000:11:00.0"
-      },
-      {
-        "memdev":"mem1",
-        "pmem_size":"256.00 MiB (268.44 MB)",
-        "ram_size":0,
-        "serial":"0",
-        "host":"0000:10:00.0"
-      },
-      {
-        "memdev":"mem0",
-        "pmem_size":"256.00 MiB (268.44 MB)",
-        "ram_size":0,
-        "serial":"0",
-        "host":"0000:0f:00.0"
-      },
-      {
-        "memdev":"mem3",
-        "pmem_size":"256.00 MiB (268.44 MB)",
-        "ram_size":0,
-        "serial":"0",
-        "host":"0000:12:00.0"
-      }
-    ]
-  },
-  {
-    "root decoders":[
-      {
-        "decoder":"decoder0.0",
-        "resource":"0x10000000000",
-        "size":"4.00 GiB (4.29 GB)",
-        "pmem_capable":true,
-        "volatile_capable":true,
-        "accelmem_capable":true,
-        "nr_targets":1,
-        "targets":[
-          {
-            "target":"ACPI0016:01",
-            "alias":"pci0000:0c",
-            "position":0,
-            "id":"0xc"
-          }
-        ]
-      }
-    ]
-  }
-]
-
-Bobo WL wrote:
->
-Hi Dan,
->
->
-Thanks for your reply!
->
->
-On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com> wrote:
->
->
->
-> What is the output of:
->
->
->
->     cxl list -MDTu -d decoder0.0
->
->
->
-> ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-> at least not in the specified order, or that validation check is broken.
->
->
-Command "cxl list -MDTu -d decoder0.0" output:
-Thanks for this, I think I know the problem, but will try some
-experiments with cxl_test first.
-
-Did the commit_store() crash stop reproducing with latest cxl/preview
-branch?
-
-On Tue, Aug 9, 2022 at 11:17 PM Dan Williams <dan.j.williams@intel.com> wrote:
->
->
-Bobo WL wrote:
->
-> Hi Dan,
->
->
->
-> Thanks for your reply!
->
->
->
-> On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
->
-> wrote:
->
-> >
->
-> > What is the output of:
->
-> >
->
-> >     cxl list -MDTu -d decoder0.0
->
-> >
->
-> > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-> > at least not in the specified order, or that validation check is broken.
->
->
->
-> Command "cxl list -MDTu -d decoder0.0" output:
->
->
-Thanks for this, I think I know the problem, but will try some
->
-experiments with cxl_test first.
->
->
-Did the commit_store() crash stop reproducing with latest cxl/preview
->
-branch?
-No, still hitting this bug if don't add extra HB device in qemu
-
-Dan Williams wrote:
->
-Bobo WL wrote:
->
-> Hi Dan,
->
->
->
-> Thanks for your reply!
->
->
->
-> On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
->
-> wrote:
->
-> >
->
-> > What is the output of:
->
-> >
->
-> >     cxl list -MDTu -d decoder0.0
->
-> >
->
-> > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-> > at least not in the specified order, or that validation check is broken.
->
->
->
-> Command "cxl list -MDTu -d decoder0.0" output:
->
->
-Thanks for this, I think I know the problem, but will try some
->
-experiments with cxl_test first.
-Hmm, so my cxl_test experiment unfortunately passed so I'm not
-reproducing the failure mode. This is the result of creating x4 region
-with devices directly attached to a single host-bridge:
-
-# cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s $((1<<30))
-{
-  "region":"region8",
-  "resource":"0xf1f0000000",
-  "size":"1024.00 MiB (1073.74 MB)",
-  "interleave_ways":4,
-  "interleave_granularity":256,
-  "decode_state":"commit",
-  "mappings":[
-    {
-      "position":3,
-      "memdev":"mem11",
-      "decoder":"decoder21.0"
-    },
-    {
-      "position":2,
-      "memdev":"mem9",
-      "decoder":"decoder19.0"
-    },
-    {
-      "position":1,
-      "memdev":"mem10",
-      "decoder":"decoder20.0"
-    },
-    {
-      "position":0,
-      "memdev":"mem12",
-      "decoder":"decoder22.0"
-    }
-  ]
-}
-cxl region: cmd_create_region: created 1 region
-
->
-Did the commit_store() crash stop reproducing with latest cxl/preview
->
-branch?
-I missed the answer to this question.
-
-All of these changes are now in Linus' tree perhaps give that a try and
-post the debug log again?
-
-On Thu, 11 Aug 2022 17:46:55 -0700
-Dan Williams <dan.j.williams@intel.com> wrote:
-
->
-Dan Williams wrote:
->
-> Bobo WL wrote:
->
-> > Hi Dan,
->
-> >
->
-> > Thanks for your reply!
->
-> >
->
-> > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
->
-> > wrote:
->
-> > >
->
-> > > What is the output of:
->
-> > >
->
-> > >     cxl list -MDTu -d decoder0.0
->
-> > >
->
-> > > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-> > > at least not in the specified order, or that validation check is
->
-> > > broken.
->
-> >
->
-> > Command "cxl list -MDTu -d decoder0.0" output:
->
->
->
-> Thanks for this, I think I know the problem, but will try some
->
-> experiments with cxl_test first.
->
->
-Hmm, so my cxl_test experiment unfortunately passed so I'm not
->
-reproducing the failure mode. This is the result of creating x4 region
->
-with devices directly attached to a single host-bridge:
->
->
-# cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s $((1<<30))
->
-{
->
-"region":"region8",
->
-"resource":"0xf1f0000000",
->
-"size":"1024.00 MiB (1073.74 MB)",
->
-"interleave_ways":4,
->
-"interleave_granularity":256,
->
-"decode_state":"commit",
->
-"mappings":[
->
-{
->
-"position":3,
->
-"memdev":"mem11",
->
-"decoder":"decoder21.0"
->
-},
->
-{
->
-"position":2,
->
-"memdev":"mem9",
->
-"decoder":"decoder19.0"
->
-},
->
-{
->
-"position":1,
->
-"memdev":"mem10",
->
-"decoder":"decoder20.0"
->
-},
->
-{
->
-"position":0,
->
-"memdev":"mem12",
->
-"decoder":"decoder22.0"
->
-}
->
-]
->
-}
->
-cxl region: cmd_create_region: created 1 region
->
->
-> Did the commit_store() crash stop reproducing with latest cxl/preview
->
-> branch?
->
->
-I missed the answer to this question.
->
->
-All of these changes are now in Linus' tree perhaps give that a try and
->
-post the debug log again?
-Hi Dan,
-
-I've moved onto looking at this one.
-1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy that 
-up
-at some stage), 1 switch, 4 downstream switch ports each with a type 3
-
-I'm not getting a crash, but can't successfully setup a region.
-Upon adding the final target
-It's failing in check_last_peer() as pos < distance.
-Seems distance is 4 which makes me think it's using the wrong level of the 
-heirarchy for
-some reason or that distance check is wrong.
-Wasn't a good idea to just skip that step though as it goes boom - though
-stack trace is not useful.
-
-Jonathan
-
-On Wed, 17 Aug 2022 17:16:19 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Thu, 11 Aug 2022 17:46:55 -0700
->
-Dan Williams <dan.j.williams@intel.com> wrote:
->
->
-> Dan Williams wrote:
->
-> > Bobo WL wrote:
->
-> > > Hi Dan,
->
-> > >
->
-> > > Thanks for your reply!
->
-> > >
->
-> > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
->
-> > > wrote:
->
-> > > >
->
-> > > > What is the output of:
->
-> > > >
->
-> > > >     cxl list -MDTu -d decoder0.0
->
-> > > >
->
-> > > > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
->
-> > > > at least not in the specified order, or that validation check is
->
-> > > > broken.
->
-> > >
->
-> > > Command "cxl list -MDTu -d decoder0.0" output:
->
-> >
->
-> > Thanks for this, I think I know the problem, but will try some
->
-> > experiments with cxl_test first.
->
->
->
-> Hmm, so my cxl_test experiment unfortunately passed so I'm not
->
-> reproducing the failure mode. This is the result of creating x4 region
->
-> with devices directly attached to a single host-bridge:
->
->
->
-> # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
->
-> $((1<<30))
->
-> {
->
->   "region":"region8",
->
->   "resource":"0xf1f0000000",
->
->   "size":"1024.00 MiB (1073.74 MB)",
->
->   "interleave_ways":4,
->
->   "interleave_granularity":256,
->
->   "decode_state":"commit",
->
->   "mappings":[
->
->     {
->
->       "position":3,
->
->       "memdev":"mem11",
->
->       "decoder":"decoder21.0"
->
->     },
->
->     {
->
->       "position":2,
->
->       "memdev":"mem9",
->
->       "decoder":"decoder19.0"
->
->     },
->
->     {
->
->       "position":1,
->
->       "memdev":"mem10",
->
->       "decoder":"decoder20.0"
->
->     },
->
->     {
->
->       "position":0,
->
->       "memdev":"mem12",
->
->       "decoder":"decoder22.0"
->
->     }
->
->   ]
->
-> }
->
-> cxl region: cmd_create_region: created 1 region
->
->
->
-> > Did the commit_store() crash stop reproducing with latest cxl/preview
->
-> > branch?
->
->
->
-> I missed the answer to this question.
->
->
->
-> All of these changes are now in Linus' tree perhaps give that a try and
->
-> post the debug log again?
->
->
-Hi Dan,
->
->
-I've moved onto looking at this one.
->
-1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
->
-that up
->
-at some stage), 1 switch, 4 downstream switch ports each with a type 3
->
->
-I'm not getting a crash, but can't successfully setup a region.
->
-Upon adding the final target
->
-It's failing in check_last_peer() as pos < distance.
->
-Seems distance is 4 which makes me think it's using the wrong level of the
->
-heirarchy for
->
-some reason or that distance check is wrong.
->
-Wasn't a good idea to just skip that step though as it goes boom - though
->
-stack trace is not useful.
-Turns out really weird corruption happens if you accidentally back two type3 
-devices
-with the same memory device. Who would have thought it :)
-
-That aside ignoring the check_last_peer() failure seems to make everything work 
-for this
-topology.  I'm not seeing the crash, so my guess is we fixed it somewhere along 
-the way.
-
-Now for the fun one.  I've replicated the crash if we have
-
-1HB 1*RP 1SW, 4SW-DSP, 4Type3
-
-Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be 
-programmed
-but the null pointer dereference isn't related to that.
-
-The bug is straight forward.  Not all decoders have commit callbacks... Will 
-send out
-a possible fix shortly.
-
-Jonathan
-
-
-
->
->
-Jonathan
->
->
->
->
->
->
-
-On Thu, 18 Aug 2022 17:37:40 +0100
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
-
->
-On Wed, 17 Aug 2022 17:16:19 +0100
->
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
-> On Thu, 11 Aug 2022 17:46:55 -0700
->
-> Dan Williams <dan.j.williams@intel.com> wrote:
->
->
->
-> > Dan Williams wrote:
->
-> > > Bobo WL wrote:
->
-> > > > Hi Dan,
->
-> > > >
->
-> > > > Thanks for your reply!
->
-> > > >
->
-> > > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams
->
-> > > > <dan.j.williams@intel.com> wrote:
->
-> > > > >
->
-> > > > > What is the output of:
->
-> > > > >
->
-> > > > >     cxl list -MDTu -d decoder0.0
->
-> > > > >
->
-> > > > > ...? It might be the case that mem1 cannot be mapped by decoder0.0,
->
-> > > > > or
->
-> > > > > at least not in the specified order, or that validation check is
->
-> > > > > broken.
->
-> > > >
->
-> > > > Command "cxl list -MDTu -d decoder0.0" output:
->
-> > >
->
-> > > Thanks for this, I think I know the problem, but will try some
->
-> > > experiments with cxl_test first.
->
-> >
->
-> > Hmm, so my cxl_test experiment unfortunately passed so I'm not
->
-> > reproducing the failure mode. This is the result of creating x4 region
->
-> > with devices directly attached to a single host-bridge:
->
-> >
->
-> > # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
->
-> > $((1<<30))
->
-> > {
->
-> >   "region":"region8",
->
-> >   "resource":"0xf1f0000000",
->
-> >   "size":"1024.00 MiB (1073.74 MB)",
->
-> >   "interleave_ways":4,
->
-> >   "interleave_granularity":256,
->
-> >   "decode_state":"commit",
->
-> >   "mappings":[
->
-> >     {
->
-> >       "position":3,
->
-> >       "memdev":"mem11",
->
-> >       "decoder":"decoder21.0"
->
-> >     },
->
-> >     {
->
-> >       "position":2,
->
-> >       "memdev":"mem9",
->
-> >       "decoder":"decoder19.0"
->
-> >     },
->
-> >     {
->
-> >       "position":1,
->
-> >       "memdev":"mem10",
->
-> >       "decoder":"decoder20.0"
->
-> >     },
->
-> >     {
->
-> >       "position":0,
->
-> >       "memdev":"mem12",
->
-> >       "decoder":"decoder22.0"
->
-> >     }
->
-> >   ]
->
-> > }
->
-> > cxl region: cmd_create_region: created 1 region
->
-> >
->
-> > > Did the commit_store() crash stop reproducing with latest cxl/preview
->
-> > > branch?
->
-> >
->
-> > I missed the answer to this question.
->
-> >
->
-> > All of these changes are now in Linus' tree perhaps give that a try and
->
-> > post the debug log again?
->
->
->
-> Hi Dan,
->
->
->
-> I've moved onto looking at this one.
->
-> 1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
->
-> that up
->
-> at some stage), 1 switch, 4 downstream switch ports each with a type 3
->
->
->
-> I'm not getting a crash, but can't successfully setup a region.
->
-> Upon adding the final target
->
-> It's failing in check_last_peer() as pos < distance.
->
-> Seems distance is 4 which makes me think it's using the wrong level of the
->
-> heirarchy for
->
-> some reason or that distance check is wrong.
->
-> Wasn't a good idea to just skip that step though as it goes boom - though
->
-> stack trace is not useful.
->
->
-Turns out really weird corruption happens if you accidentally back two type3
->
-devices
->
-with the same memory device. Who would have thought it :)
->
->
-That aside ignoring the check_last_peer() failure seems to make everything
->
-work for this
->
-topology.  I'm not seeing the crash, so my guess is we fixed it somewhere
->
-along the way.
->
->
-Now for the fun one.  I've replicated the crash if we have
->
->
-1HB 1*RP 1SW, 4SW-DSP, 4Type3
->
->
-Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be
->
-programmed
->
-but the null pointer dereference isn't related to that.
->
->
-The bug is straight forward.  Not all decoders have commit callbacks... Will
->
-send out
->
-a possible fix shortly.
->
-For completeness I'm carrying this hack because I haven't gotten my head
-around the right fix for check_last_peer() failing on this test topology.
-
-diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
-index c49d9a5f1091..275e143bd748 100644
---- a/drivers/cxl/core/region.c
-+++ b/drivers/cxl/core/region.c
-@@ -978,7 +978,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
-                                rc = check_last_peer(cxled, ep, cxl_rr,
-                                                     distance);
-                                if (rc)
--                                       return rc;
-+                                       //      return rc;
-                                goto out_target_set;
-                        }
-                goto add_target;
---
-
-I might find more bugs with more testing, but this is all the ones I've
-seen so far + in Bobo's reports.  Qemu fixes are now in upstream so
-will be there in the release. 
-
-As a reminder, testing on QEMU has a few corners...
-
-Need a patch to add serial number ECAP support. It is on list for revew,
-but will have wait for after QEMU 7.1 release (which may be next week)
-
-QEMU still assumes HDM decoder on the host bridge will be programmed.
-So if you want anything to work there should be at least
-2 RP below the HB (no need to plug anything in to one of them).
-
-I don't want to add a commandline parameter to hide the decoder in QEMU
-and detecting there is only one RP would require moving a bunch of static
-stuff into runtime code (I think).
-
-I still think we should make the kernel check to see if there is a decoder,
-but if not I might see how bad a hack it is to have QEMU ignore that decoder
-if not committed in this one special case (HB HDM decoder with only one place
-it can send stuff). Obviously that would be a break from specification
-so less than idea!
-
-Thanks,
-
-Jonathan
-
-On Fri, 19 Aug 2022 09:46:55 +0100
-Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
-
->
-On Thu, 18 Aug 2022 17:37:40 +0100
->
-Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
->
->
-> On Wed, 17 Aug 2022 17:16:19 +0100
->
-> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
->
->
->
-> > On Thu, 11 Aug 2022 17:46:55 -0700
->
-> > Dan Williams <dan.j.williams@intel.com> wrote:
->
-> >
->
-> > > Dan Williams wrote:
->
-> > > > Bobo WL wrote:
->
-> > > > > Hi Dan,
->
-> > > > >
->
-> > > > > Thanks for your reply!
->
-> > > > >
->
-> > > > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams
->
-> > > > > <dan.j.williams@intel.com> wrote:
->
-> > > > > >
->
-> > > > > > What is the output of:
->
-> > > > > >
->
-> > > > > >     cxl list -MDTu -d decoder0.0
->
-> > > > > >
->
-> > > > > > ...? It might be the case that mem1 cannot be mapped by
->
-> > > > > > decoder0.0, or
->
-> > > > > > at least not in the specified order, or that validation check is
->
-> > > > > > broken.
->
-> > > > >
->
-> > > > > Command "cxl list -MDTu -d decoder0.0" output:
->
-> > > >
->
-> > > > Thanks for this, I think I know the problem, but will try some
->
-> > > > experiments with cxl_test first.
->
-> > >
->
-> > > Hmm, so my cxl_test experiment unfortunately passed so I'm not
->
-> > > reproducing the failure mode. This is the result of creating x4 region
->
-> > > with devices directly attached to a single host-bridge:
->
-> > >
->
-> > > # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
->
-> > > $((1<<30))
->
-> > > {
->
-> > >   "region":"region8",
->
-> > >   "resource":"0xf1f0000000",
->
-> > >   "size":"1024.00 MiB (1073.74 MB)",
->
-> > >   "interleave_ways":4,
->
-> > >   "interleave_granularity":256,
->
-> > >   "decode_state":"commit",
->
-> > >   "mappings":[
->
-> > >     {
->
-> > >       "position":3,
->
-> > >       "memdev":"mem11",
->
-> > >       "decoder":"decoder21.0"
->
-> > >     },
->
-> > >     {
->
-> > >       "position":2,
->
-> > >       "memdev":"mem9",
->
-> > >       "decoder":"decoder19.0"
->
-> > >     },
->
-> > >     {
->
-> > >       "position":1,
->
-> > >       "memdev":"mem10",
->
-> > >       "decoder":"decoder20.0"
->
-> > >     },
->
-> > >     {
->
-> > >       "position":0,
->
-> > >       "memdev":"mem12",
->
-> > >       "decoder":"decoder22.0"
->
-> > >     }
->
-> > >   ]
->
-> > > }
->
-> > > cxl region: cmd_create_region: created 1 region
->
-> > >
->
-> > > > Did the commit_store() crash stop reproducing with latest cxl/preview
->
-> > > > branch?
->
-> > >
->
-> > > I missed the answer to this question.
->
-> > >
->
-> > > All of these changes are now in Linus' tree perhaps give that a try and
->
-> > > post the debug log again?
->
-> >
->
-> > Hi Dan,
->
-> >
->
-> > I've moved onto looking at this one.
->
-> > 1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
->
-> > that up
->
-> > at some stage), 1 switch, 4 downstream switch ports each with a type 3
->
-> >
->
-> > I'm not getting a crash, but can't successfully setup a region.
->
-> > Upon adding the final target
->
-> > It's failing in check_last_peer() as pos < distance.
->
-> > Seems distance is 4 which makes me think it's using the wrong level of
->
-> > the heirarchy for
->
-> > some reason or that distance check is wrong.
->
-> > Wasn't a good idea to just skip that step though as it goes boom - though
->
-> > stack trace is not useful.
->
->
->
-> Turns out really weird corruption happens if you accidentally back two
->
-> type3 devices
->
-> with the same memory device. Who would have thought it :)
->
->
->
-> That aside ignoring the check_last_peer() failure seems to make everything
->
-> work for this
->
-> topology.  I'm not seeing the crash, so my guess is we fixed it somewhere
->
-> along the way.
->
->
->
-> Now for the fun one.  I've replicated the crash if we have
->
->
->
-> 1HB 1*RP 1SW, 4SW-DSP, 4Type3
->
->
->
-> Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be
->
-> programmed
->
-> but the null pointer dereference isn't related to that.
->
->
->
-> The bug is straight forward.  Not all decoders have commit callbacks...
->
-> Will send out
->
-> a possible fix shortly.
->
->
->
-For completeness I'm carrying this hack because I haven't gotten my head
->
-around the right fix for check_last_peer() failing on this test topology.
->
->
-diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
->
-index c49d9a5f1091..275e143bd748 100644
->
---- a/drivers/cxl/core/region.c
->
-+++ b/drivers/cxl/core/region.c
->
-@@ -978,7 +978,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
->
-rc = check_last_peer(cxled, ep, cxl_rr,
->
-distance);
->
-if (rc)
->
--                                       return rc;
->
-+                                       //      return rc;
->
-goto out_target_set;
->
-}
->
-goto add_target;
-I'm still carrying this hack and still haven't worked out the right fix.
-
-Suggestions welcome!  If not I'll hopefully get some time on this
-towards the end of the week.
-
-Jonathan
-
diff --git a/results/classifier/005/vnc/42613410 b/results/classifier/005/vnc/42613410
deleted file mode 100644
index c04a83e7..00000000
--- a/results/classifier/005/vnc/42613410
+++ /dev/null
@@ -1,157 +0,0 @@
-vnc: 0.400
-KVM: 0.381
-device: 0.342
-other: 0.332
-graphic: 0.330
-semantic: 0.327
-mistranslation: 0.314
-instruction: 0.307
-network: 0.284
-assembly: 0.283
-socket: 0.190
-boot: 0.187
-
-[Qemu-devel] [PATCH, Bug 1612908] scripts: Add TCP endpoints for qom-* scripts
-
-From: Carl Allendorph <address@hidden>
-
-I've created a patch for bug #1612908. The current docs for the scripts
-in the "scripts/qmp/" directory suggest that both unix sockets and
-tcp endpoints can be used. The TCP endpoints don't work for most of the
-scripts, with notable exception of 'qmp-shell'. This patch attempts to
-refactor the process of distinguishing between unix path endpoints and
-tcp endpoints to work for all of these scripts.
-
-Carl Allendorph (1):
-  scripts: Add ability for qom-* python scripts to target tcp endpoints
-
- scripts/qmp/qmp-shell | 22 ++--------------------
- scripts/qmp/qmp.py    | 23 ++++++++++++++++++++---
- 2 files changed, 22 insertions(+), 23 deletions(-)
-
---
-2.7.4
-
-From: Carl Allendorph <address@hidden>
-
-The current code for QEMUMonitorProtocol accepts both a unix socket
-endpoint as a string and a tcp endpoint as a tuple. Most of the scripts
-that use this class don't massage the command line argument to generate
-a tuple. This patch refactors qmp-shell slightly to reuse the existing
-parsing of the "host:port" string for all the qom-* scripts.
-
-Signed-off-by: Carl Allendorph <address@hidden>
----
- scripts/qmp/qmp-shell | 22 ++--------------------
- scripts/qmp/qmp.py    | 23 ++++++++++++++++++++---
- 2 files changed, 22 insertions(+), 23 deletions(-)
-
-diff --git a/scripts/qmp/qmp-shell b/scripts/qmp/qmp-shell
-index 0373b24..8a2a437 100755
---- a/scripts/qmp/qmp-shell
-+++ b/scripts/qmp/qmp-shell
-@@ -83,9 +83,6 @@ class QMPCompleter(list):
- class QMPShellError(Exception):
-     pass
- 
--class QMPShellBadPort(QMPShellError):
--    pass
--
- class FuzzyJSON(ast.NodeTransformer):
-     '''This extension of ast.NodeTransformer filters literal "true/false/null"
-     values in an AST and replaces them by proper "True/False/None" values that
-@@ -103,28 +100,13 @@ class FuzzyJSON(ast.NodeTransformer):
- #       _execute_cmd()). Let's design a better one.
- class QMPShell(qmp.QEMUMonitorProtocol):
-     def __init__(self, address, pretty=False):
--        qmp.QEMUMonitorProtocol.__init__(self, self.__get_address(address))
-+        qmp.QEMUMonitorProtocol.__init__(self, address)
-         self._greeting = None
-         self._completer = None
-         self._pretty = pretty
-         self._transmode = False
-         self._actions = list()
- 
--    def __get_address(self, arg):
--        """
--        Figure out if the argument is in the port:host form, if it's not it's
--        probably a file path.
--        """
--        addr = arg.split(':')
--        if len(addr) == 2:
--            try:
--                port = int(addr[1])
--            except ValueError:
--                raise QMPShellBadPort
--            return ( addr[0], port )
--        # socket path
--        return arg
--
-     def _fill_completion(self):
-         for cmd in self.cmd('query-commands')['return']:
-             self._completer.append(cmd['name'])
-@@ -400,7 +382,7 @@ def main():
- 
-         if qemu is None:
-             fail_cmdline()
--    except QMPShellBadPort:
-+    except qmp.QMPShellBadPort:
-         die('bad port number in command-line')
- 
-     try:
-diff --git a/scripts/qmp/qmp.py b/scripts/qmp/qmp.py
-index 62d3651..261ece8 100644
---- a/scripts/qmp/qmp.py
-+++ b/scripts/qmp/qmp.py
-@@ -25,21 +25,23 @@ class QMPCapabilitiesError(QMPError):
- class QMPTimeoutError(QMPError):
-     pass
- 
-+class QMPShellBadPort(QMPError):
-+    pass
-+
- class QEMUMonitorProtocol:
-     def __init__(self, address, server=False, debug=False):
-         """
-         Create a QEMUMonitorProtocol class.
- 
-         @param address: QEMU address, can be either a unix socket path (string)
--                        or a tuple in the form ( address, port ) for a TCP
--                        connection
-+                        or a TCP endpoint (string in the format "host:port")
-         @param server: server mode listens on the socket (bool)
-         @raise socket.error on socket connection errors
-         @note No connection is established, this is done by the connect() or
-               accept() methods
-         """
-         self.__events = []
--        self.__address = address
-+        self.__address = self.__get_address(address)
-         self._debug = debug
-         self.__sock = self.__get_sock()
-         if server:
-@@ -47,6 +49,21 @@ class QEMUMonitorProtocol:
-             self.__sock.bind(self.__address)
-             self.__sock.listen(1)
- 
-+    def __get_address(self, arg):
-+        """
-+        Figure out if the argument is in the port:host form, if it's not it's
-+        probably a file path.
-+        """
-+        addr = arg.split(':')
-+        if len(addr) == 2:
-+            try:
-+                port = int(addr[1])
-+            except ValueError:
-+                raise QMPShellBadPort
-+            return ( addr[0], port )
-+        # socket path
-+        return arg
-+
-     def __get_sock(self):
-         if isinstance(self.__address, tuple):
-             family = socket.AF_INET
--- 
-2.7.4
-
diff --git a/results/classifier/005/vnc/80570214 b/results/classifier/005/vnc/80570214
deleted file mode 100644
index 8b1165d3..00000000
--- a/results/classifier/005/vnc/80570214
+++ /dev/null
@@ -1,408 +0,0 @@
-vnc: 0.983
-assembly: 0.979
-semantic: 0.978
-instruction: 0.978
-other: 0.978
-graphic: 0.978
-network: 0.975
-socket: 0.975
-device: 0.974
-mistranslation: 0.973
-KVM: 0.971
-boot: 0.969
-
-[Qemu-devel] [vhost-user BUG ?] QEMU process segfault when shutdown or reboot with vhost-user
-
-Hi,
-
-We catch a segfault in our project.
-
-Qemu version is 2.3.0
-
-The Stack backtrace is:
-(gdb) bt
-#0  0x0000000000000000 in ?? ()
-#1  0x00007f7ad9280b2f in qemu_deliver_packet (sender=<optimized out>, flags=<optimized 
-out>, data=<optimized out>, size=100, opaque=
-    0x7f7ad9d6db10) at net/net.c:510
-#2  0x00007f7ad92831fa in qemu_net_queue_deliver (size=<optimized out>, data=<optimized 
-out>, flags=<optimized out>,
-    sender=<optimized out>, queue=<optimized out>) at net/queue.c:157
-#3  qemu_net_queue_flush (queue=0x7f7ad9d39630) at net/queue.c:254
-#4  0x00007f7ad9280dac in qemu_flush_or_purge_queued_packets 
-(nc=0x7f7ad9d6db10, purge=true) at net/net.c:539
-#5  0x00007f7ad9280e76 in net_vm_change_state_handler (opaque=<optimized out>, 
-running=<optimized out>, state=100) at net/net.c:1214
-#6  0x00007f7ad915612f in vm_state_notify (running=0, state=RUN_STATE_SHUTDOWN) 
-at vl.c:1820
-#7  0x00007f7ad906db1a in do_vm_stop (state=<optimized out>) at 
-/usr/src/packages/BUILD/qemu-kvm-2.3.0/cpus.c:631
-#8  vm_stop (state=RUN_STATE_SHUTDOWN) at 
-/usr/src/packages/BUILD/qemu-kvm-2.3.0/cpus.c:1325
-#9  0x00007f7ad915e4a2 in main_loop_should_exit () at vl.c:2080
-#10 main_loop () at vl.c:2131
-#11 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at 
-vl.c:4721
-(gdb) p *(NetClientState *)0x7f7ad9d6db10
-$1 = {info = 0x7f7ad9824520, link_down = 0, next = {tqe_next = 0x7f7ad0f06d10, 
-tqe_prev = 0x7f7ad98b1cf0}, peer = 0x7f7ad0f06d10,
-  incoming_queue = 0x7f7ad9d39630, model = 0x7f7ad9d39590 "vhost_user", name = 
-0x7f7ad9d39570 "hostnet0", info_str =
-    "vhost-user to charnet0", '\000' <repeats 233 times>, receive_disabled = 0, 
-destructor =
-    0x7f7ad92821f0 <qemu_net_client_destructor>, queue_index = 0, 
-rxfilter_notify_enabled = 0}
-(gdb) p *(NetClientInfo *)0x7f7ad9824520
-$2 = {type = NET_CLIENT_OPTIONS_KIND_VHOST_USER, size = 360, receive = 0, 
-receive_raw = 0, receive_iov = 0, can_receive = 0, cleanup =
-    0x7f7ad9288850 <vhost_user_cleanup>, link_status_changed = 0, 
-query_rx_filter = 0, poll = 0, has_ufo =
-    0x7f7ad92886d0 <vhost_user_has_ufo>, has_vnet_hdr = 0x7f7ad9288670 
-<vhost_user_has_vnet_hdr>, has_vnet_hdr_len = 0,
-  using_vnet_hdr = 0, set_offload = 0, set_vnet_hdr_len = 0}
-(gdb)
-
-The corresponding codes where gdb reports error are: (We have added some codes 
-in net.c)
-ssize_t qemu_deliver_packet(NetClientState *sender,
-                            unsigned flags,
-                            const uint8_t *data,
-                            size_t size,
-                            void *opaque)
-{
-    NetClientState *nc = opaque;
-    ssize_t ret;
-
-    if (nc->link_down) {
-        return size;
-    }
-
-    if (nc->receive_disabled) {
-        return 0;
-    }
-
-    if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
-        ret = nc->info->receive_raw(nc, data, size);
-    } else {
-        ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
-    }
-
-I'm not quite familiar with vhost-user, but for vhost-user, these two callback 
-functions seem to be always NULL,
-Why we can come here ?
-Is it an error to add VM state change handler for vhost-user ?
-
-Thanks,
-zhanghailiang
-
-Hi
-
-On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
-<address@hidden> wrote:
->
-The corresponding codes where gdb reports error are: (We have added some
->
-codes in net.c)
-Can you reproduce with unmodified qemu? Could you give instructions to do so?
-
->
-ssize_t qemu_deliver_packet(NetClientState *sender,
->
-unsigned flags,
->
-const uint8_t *data,
->
-size_t size,
->
-void *opaque)
->
-{
->
-NetClientState *nc = opaque;
->
-ssize_t ret;
->
->
-if (nc->link_down) {
->
-return size;
->
-}
->
->
-if (nc->receive_disabled) {
->
-return 0;
->
-}
->
->
-if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
->
-ret = nc->info->receive_raw(nc, data, size);
->
-} else {
->
-ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
->
-}
->
->
-I'm not quite familiar with vhost-user, but for vhost-user, these two
->
-callback functions seem to be always NULL,
->
-Why we can come here ?
-You should not come here, vhost-user has nc->receive_disabled (it
-changes in 2.5)
-
--- 
-Marc-André Lureau
-
-On 2015/11/3 22:54, Marc-André Lureau wrote:
-Hi
-
-On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
-<address@hidden> wrote:
-The corresponding codes where gdb reports error are: (We have added some
-codes in net.c)
-Can you reproduce with unmodified qemu? Could you give instructions to do so?
-OK, i will try to do it. There is nothing special, we run iperf tool in VM,
-and then shutdown or reboot it. There is change you can catch segfault.
-ssize_t qemu_deliver_packet(NetClientState *sender,
-                             unsigned flags,
-                             const uint8_t *data,
-                             size_t size,
-                             void *opaque)
-{
-     NetClientState *nc = opaque;
-     ssize_t ret;
-
-     if (nc->link_down) {
-         return size;
-     }
-
-     if (nc->receive_disabled) {
-         return 0;
-     }
-
-     if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
-         ret = nc->info->receive_raw(nc, data, size);
-     } else {
-         ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
-     }
-
-I'm not quite familiar with vhost-user, but for vhost-user, these two
-callback functions seem to be always NULL,
-Why we can come here ?
-You should not come here, vhost-user has nc->receive_disabled (it
-changes in 2.5)
-I have looked at the newest codes, i think we can still have chance to
-come here, since we will change nc->receive_disable to false temporarily in
-qemu_flush_or_purge_queued_packets(), there is no difference between 2.3 and 2.5
-for this.
-Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
-in qemu_net_queue_flush() for vhost-user ?
-
-i will try to reproduce it by using newest qemu.
-
-Thanks,
-zhanghailiang
-
-On 11/04/2015 10:24 AM, zhanghailiang wrote:
->
-On 2015/11/3 22:54, Marc-André Lureau wrote:
->
-> Hi
->
->
->
-> On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
->
-> <address@hidden> wrote:
->
->> The corresponding codes where gdb reports error are: (We have added
->
->> some
->
->> codes in net.c)
->
->
->
-> Can you reproduce with unmodified qemu? Could you give instructions
->
-> to do so?
->
->
->
->
-OK, i will try to do it. There is nothing special, we run iperf tool
->
-in VM,
->
-and then shutdown or reboot it. There is change you can catch segfault.
->
->
->> ssize_t qemu_deliver_packet(NetClientState *sender,
->
->>                              unsigned flags,
->
->>                              const uint8_t *data,
->
->>                              size_t size,
->
->>                              void *opaque)
->
->> {
->
->>      NetClientState *nc = opaque;
->
->>      ssize_t ret;
->
->>
->
->>      if (nc->link_down) {
->
->>          return size;
->
->>      }
->
->>
->
->>      if (nc->receive_disabled) {
->
->>          return 0;
->
->>      }
->
->>
->
->>      if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
->
->>          ret = nc->info->receive_raw(nc, data, size);
->
->>      } else {
->
->>          ret = nc->info->receive(nc, data, size);   ----> Here is
->
->> 510 line
->
->>      }
->
->>
->
->> I'm not quite familiar with vhost-user, but for vhost-user, these two
->
->> callback functions seem to be always NULL,
->
->> Why we can come here ?
->
->
->
-> You should not come here, vhost-user has nc->receive_disabled (it
->
-> changes in 2.5)
->
->
->
->
-I have looked at the newest codes, i think we can still have chance to
->
-come here, since we will change nc->receive_disable to false
->
-temporarily in
->
-qemu_flush_or_purge_queued_packets(), there is no difference between
->
-2.3 and 2.5
->
-for this.
->
-Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
->
-in qemu_net_queue_flush() for vhost-user ?
-The only thing I can image is self announcing. Are you trying to do
-migration? 2.5 only support sending rarp through this.
-
-And it's better to have a breakpoint to see why a packet was queued for
-vhost-user. The stack trace may also help in this case.
-
->
->
-i will try to reproduce it by using newest qemu.
->
->
-Thanks,
->
-zhanghailiang
->
-
-On 2015/11/4 11:19, Jason Wang wrote:
-On 11/04/2015 10:24 AM, zhanghailiang wrote:
-On 2015/11/3 22:54, Marc-André Lureau wrote:
-Hi
-
-On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
-<address@hidden> wrote:
-The corresponding codes where gdb reports error are: (We have added
-some
-codes in net.c)
-Can you reproduce with unmodified qemu? Could you give instructions
-to do so?
-OK, i will try to do it. There is nothing special, we run iperf tool
-in VM,
-and then shutdown or reboot it. There is change you can catch segfault.
-ssize_t qemu_deliver_packet(NetClientState *sender,
-                              unsigned flags,
-                              const uint8_t *data,
-                              size_t size,
-                              void *opaque)
-{
-      NetClientState *nc = opaque;
-      ssize_t ret;
-
-      if (nc->link_down) {
-          return size;
-      }
-
-      if (nc->receive_disabled) {
-          return 0;
-      }
-
-      if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
-          ret = nc->info->receive_raw(nc, data, size);
-      } else {
-          ret = nc->info->receive(nc, data, size);   ----> Here is
-510 line
-      }
-
-I'm not quite familiar with vhost-user, but for vhost-user, these two
-callback functions seem to be always NULL,
-Why we can come here ?
-You should not come here, vhost-user has nc->receive_disabled (it
-changes in 2.5)
-I have looked at the newest codes, i think we can still have chance to
-come here, since we will change nc->receive_disable to false
-temporarily in
-qemu_flush_or_purge_queued_packets(), there is no difference between
-2.3 and 2.5
-for this.
-Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
-in qemu_net_queue_flush() for vhost-user ?
-The only thing I can image is self announcing. Are you trying to do
-migration? 2.5 only support sending rarp through this.
-Hmm, it's not triggered by migration, For qemu-2.5, IMHO, it doesn't have such 
-problem,
-since the callback function 'receive' is not NULL. It is vhost_user_receive().
-And it's better to have a breakpoint to see why a packet was queued for
-vhost-user. The stack trace may also help in this case.
-OK, i'm trying to reproduce it.
-
-Thanks,
-zhanghailiang
-i will try to reproduce it by using newest qemu.
-
-Thanks,
-zhanghailiang
-.
-
-- 
cgit 1.4.1