From dee4dcba78baf712cab403d47d9db319ab7f95d6 Mon Sep 17 00:00:00 2001
From: Christian Krinitsin <mail@krinitsin.com>
Date: Thu, 3 Jul 2025 19:39:53 +0200
Subject: restructure results

---
 results/classifier/zero-shot/010/009-010           |   78 +
 results/classifier/zero-shot/010/KVM/04472277      |  600 ++
 results/classifier/zero-shot/010/README.md         |   10 +
 results/classifier/zero-shot/010/boot/60339453     |   85 +
 results/classifier/zero-shot/010/categories.csv    |    8 +
 results/classifier/zero-shot/010/debug/24190340    | 2080 ++++++
 results/classifier/zero-shot/010/debug/64571620    |  809 +++
 results/classifier/zero-shot/010/network/62179944  |   55 +
 results/classifier/zero-shot/010/none/42613410     |  173 +
 results/classifier/zero-shot/010/review/02364653   |  387 +
 results/classifier/zero-shot/010/review/02572177   |  445 ++
 results/classifier/zero-shot/010/review/05479587   |  107 +
 results/classifier/zero-shot/010/review/11357571   |   71 +
 results/classifier/zero-shot/010/review/11933524   | 1149 +++
 results/classifier/zero-shot/010/review/12360755   |  320 +
 results/classifier/zero-shot/010/review/12869209   |  112 +
 results/classifier/zero-shot/010/review/13442371   |  393 +
 results/classifier/zero-shot/010/review/14488057   |  735 ++
 results/classifier/zero-shot/010/review/14887122   |  282 +
 results/classifier/zero-shot/010/review/16056596   |  122 +
 results/classifier/zero-shot/010/review/16201167   |  124 +
 results/classifier/zero-shot/010/review/16228234   | 1868 +++++
 results/classifier/zero-shot/010/review/17743720   |  795 +++
 results/classifier/zero-shot/010/review/21221931   |  352 +
 results/classifier/zero-shot/010/review/21247035   | 1345 ++++
 results/classifier/zero-shot/010/review/22219210   |   67 +
 results/classifier/zero-shot/010/review/23270873   |  716 ++
 results/classifier/zero-shot/010/review/23300761   |  337 +
 results/classifier/zero-shot/010/review/23448582   |  289 +
 results/classifier/zero-shot/010/review/24930826   |   57 +
 results/classifier/zero-shot/010/review/25842545   |  226 +
 results/classifier/zero-shot/010/review/25892827   | 1101 +++
 results/classifier/zero-shot/010/review/26095107   |  182 +
 results/classifier/zero-shot/010/review/26430026   |  189 +
 results/classifier/zero-shot/010/review/28596630   |  137 +
 results/classifier/zero-shot/010/review/30680944   |  619 ++
 results/classifier/zero-shot/010/review/31349848   |  178 +
 results/classifier/zero-shot/010/review/32484936   |  247 +
 results/classifier/zero-shot/010/review/33802194   | 4963 +++++++++++++
 results/classifier/zero-shot/010/review/35170175   |  545 ++
 results/classifier/zero-shot/010/review/36568044   | 4605 ++++++++++++
 results/classifier/zero-shot/010/review/42226390   |  211 +
 results/classifier/zero-shot/010/review/42974450   |  453 ++
 results/classifier/zero-shot/010/review/43643137   |  562 ++
 results/classifier/zero-shot/010/review/46572227   |  430 ++
 results/classifier/zero-shot/010/review/48245039   |  554 ++
 results/classifier/zero-shot/010/review/50773216   |  134 +
 results/classifier/zero-shot/010/review/51610399   |  332 +
 results/classifier/zero-shot/010/review/53568181   |  102 +
 results/classifier/zero-shot/010/review/55247116   | 1334 ++++
 results/classifier/zero-shot/010/review/55367348   |  556 ++
 results/classifier/zero-shot/010/review/55753058   |  317 +
 results/classifier/zero-shot/010/review/55961334   |   63 +
 results/classifier/zero-shot/010/review/56309929   |  204 +
 results/classifier/zero-shot/010/review/56937788   |  368 +
 results/classifier/zero-shot/010/review/57195159   |  339 +
 results/classifier/zero-shot/010/review/57231878   |  266 +
 results/classifier/zero-shot/010/review/57756589   | 1445 ++++
 results/classifier/zero-shot/010/review/59540920   |  400 ++
 results/classifier/zero-shot/010/review/63565653   |   73 +
 results/classifier/zero-shot/010/review/64322995   |   78 +
 results/classifier/zero-shot/010/review/65781993   | 2817 ++++++++
 results/classifier/zero-shot/010/review/66743673   |  388 +
 results/classifier/zero-shot/010/review/67821138   |  223 +
 results/classifier/zero-shot/010/review/68897003   |  740 ++
 results/classifier/zero-shot/010/review/70021271   | 7472 ++++++++++++++++++++
 results/classifier/zero-shot/010/review/70294255   | 1085 +++
 results/classifier/zero-shot/010/review/70416488   | 1203 ++++
 results/classifier/zero-shot/010/review/70868267   |   64 +
 results/classifier/zero-shot/010/review/71456293   | 1510 ++++
 results/classifier/zero-shot/010/review/73660729   |   55 +
 results/classifier/zero-shot/010/review/74466963   | 1902 +++++
 results/classifier/zero-shot/010/review/74545755   |  368 +
 results/classifier/zero-shot/010/review/74715356   |  150 +
 results/classifier/zero-shot/010/review/79834768   |  433 ++
 results/classifier/zero-shot/010/review/80570214   |  424 ++
 results/classifier/zero-shot/010/review/80604314   | 1504 ++++
 results/classifier/zero-shot/010/review/80615920   |  372 +
 results/classifier/zero-shot/010/review/81775929   |  259 +
 results/classifier/zero-shot/010/review/85542195   |  144 +
 results/classifier/zero-shot/010/review/88225572   | 2924 ++++++++
 results/classifier/zero-shot/010/review/88281850   |  305 +
 results/classifier/zero-shot/010/review/92957605   |  442 ++
 results/classifier/zero-shot/010/review/95154278   |  179 +
 results/classifier/zero-shot/010/review/96782458   | 1023 +++
 results/classifier/zero-shot/010/review/99674399   |  172 +
 .../010/semantic/gitlab_semantic_addsubps          |   52 +
 .../zero-shot/010/semantic/gitlab_semantic_adox    |   65 +
 .../zero-shot/010/semantic/gitlab_semantic_bextr   |   54 +
 .../zero-shot/010/semantic/gitlab_semantic_blsi    |   49 +
 .../zero-shot/010/semantic/gitlab_semantic_blsmsk  |   56 +
 .../zero-shot/010/semantic/gitlab_semantic_bzhi    |   67 +
 92 files changed, 61685 insertions(+)
 create mode 100644 results/classifier/zero-shot/010/009-010
 create mode 100644 results/classifier/zero-shot/010/KVM/04472277
 create mode 100644 results/classifier/zero-shot/010/README.md
 create mode 100644 results/classifier/zero-shot/010/boot/60339453
 create mode 100644 results/classifier/zero-shot/010/categories.csv
 create mode 100644 results/classifier/zero-shot/010/debug/24190340
 create mode 100644 results/classifier/zero-shot/010/debug/64571620
 create mode 100644 results/classifier/zero-shot/010/network/62179944
 create mode 100644 results/classifier/zero-shot/010/none/42613410
 create mode 100644 results/classifier/zero-shot/010/review/02364653
 create mode 100644 results/classifier/zero-shot/010/review/02572177
 create mode 100644 results/classifier/zero-shot/010/review/05479587
 create mode 100644 results/classifier/zero-shot/010/review/11357571
 create mode 100644 results/classifier/zero-shot/010/review/11933524
 create mode 100644 results/classifier/zero-shot/010/review/12360755
 create mode 100644 results/classifier/zero-shot/010/review/12869209
 create mode 100644 results/classifier/zero-shot/010/review/13442371
 create mode 100644 results/classifier/zero-shot/010/review/14488057
 create mode 100644 results/classifier/zero-shot/010/review/14887122
 create mode 100644 results/classifier/zero-shot/010/review/16056596
 create mode 100644 results/classifier/zero-shot/010/review/16201167
 create mode 100644 results/classifier/zero-shot/010/review/16228234
 create mode 100644 results/classifier/zero-shot/010/review/17743720
 create mode 100644 results/classifier/zero-shot/010/review/21221931
 create mode 100644 results/classifier/zero-shot/010/review/21247035
 create mode 100644 results/classifier/zero-shot/010/review/22219210
 create mode 100644 results/classifier/zero-shot/010/review/23270873
 create mode 100644 results/classifier/zero-shot/010/review/23300761
 create mode 100644 results/classifier/zero-shot/010/review/23448582
 create mode 100644 results/classifier/zero-shot/010/review/24930826
 create mode 100644 results/classifier/zero-shot/010/review/25842545
 create mode 100644 results/classifier/zero-shot/010/review/25892827
 create mode 100644 results/classifier/zero-shot/010/review/26095107
 create mode 100644 results/classifier/zero-shot/010/review/26430026
 create mode 100644 results/classifier/zero-shot/010/review/28596630
 create mode 100644 results/classifier/zero-shot/010/review/30680944
 create mode 100644 results/classifier/zero-shot/010/review/31349848
 create mode 100644 results/classifier/zero-shot/010/review/32484936
 create mode 100644 results/classifier/zero-shot/010/review/33802194
 create mode 100644 results/classifier/zero-shot/010/review/35170175
 create mode 100644 results/classifier/zero-shot/010/review/36568044
 create mode 100644 results/classifier/zero-shot/010/review/42226390
 create mode 100644 results/classifier/zero-shot/010/review/42974450
 create mode 100644 results/classifier/zero-shot/010/review/43643137
 create mode 100644 results/classifier/zero-shot/010/review/46572227
 create mode 100644 results/classifier/zero-shot/010/review/48245039
 create mode 100644 results/classifier/zero-shot/010/review/50773216
 create mode 100644 results/classifier/zero-shot/010/review/51610399
 create mode 100644 results/classifier/zero-shot/010/review/53568181
 create mode 100644 results/classifier/zero-shot/010/review/55247116
 create mode 100644 results/classifier/zero-shot/010/review/55367348
 create mode 100644 results/classifier/zero-shot/010/review/55753058
 create mode 100644 results/classifier/zero-shot/010/review/55961334
 create mode 100644 results/classifier/zero-shot/010/review/56309929
 create mode 100644 results/classifier/zero-shot/010/review/56937788
 create mode 100644 results/classifier/zero-shot/010/review/57195159
 create mode 100644 results/classifier/zero-shot/010/review/57231878
 create mode 100644 results/classifier/zero-shot/010/review/57756589
 create mode 100644 results/classifier/zero-shot/010/review/59540920
 create mode 100644 results/classifier/zero-shot/010/review/63565653
 create mode 100644 results/classifier/zero-shot/010/review/64322995
 create mode 100644 results/classifier/zero-shot/010/review/65781993
 create mode 100644 results/classifier/zero-shot/010/review/66743673
 create mode 100644 results/classifier/zero-shot/010/review/67821138
 create mode 100644 results/classifier/zero-shot/010/review/68897003
 create mode 100644 results/classifier/zero-shot/010/review/70021271
 create mode 100644 results/classifier/zero-shot/010/review/70294255
 create mode 100644 results/classifier/zero-shot/010/review/70416488
 create mode 100644 results/classifier/zero-shot/010/review/70868267
 create mode 100644 results/classifier/zero-shot/010/review/71456293
 create mode 100644 results/classifier/zero-shot/010/review/73660729
 create mode 100644 results/classifier/zero-shot/010/review/74466963
 create mode 100644 results/classifier/zero-shot/010/review/74545755
 create mode 100644 results/classifier/zero-shot/010/review/74715356
 create mode 100644 results/classifier/zero-shot/010/review/79834768
 create mode 100644 results/classifier/zero-shot/010/review/80570214
 create mode 100644 results/classifier/zero-shot/010/review/80604314
 create mode 100644 results/classifier/zero-shot/010/review/80615920
 create mode 100644 results/classifier/zero-shot/010/review/81775929
 create mode 100644 results/classifier/zero-shot/010/review/85542195
 create mode 100644 results/classifier/zero-shot/010/review/88225572
 create mode 100644 results/classifier/zero-shot/010/review/88281850
 create mode 100644 results/classifier/zero-shot/010/review/92957605
 create mode 100644 results/classifier/zero-shot/010/review/95154278
 create mode 100644 results/classifier/zero-shot/010/review/96782458
 create mode 100644 results/classifier/zero-shot/010/review/99674399
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_addsubps
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_adox
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_bextr
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_blsi
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_blsmsk
 create mode 100644 results/classifier/zero-shot/010/semantic/gitlab_semantic_bzhi

(limited to 'results/classifier/zero-shot/010')

diff --git a/results/classifier/zero-shot/010/009-010 b/results/classifier/zero-shot/010/009-010
new file mode 100644
index 00000000..0488e47c
--- /dev/null
+++ b/results/classifier/zero-shot/010/009-010
@@ -0,0 +1,78 @@
+77 changes:
+14887122: permissions -> review
+99674399: permissions -> review
+48245039: permissions -> review
+26430026: permissions -> review
+67821138: permissions -> review
+31349848: permissions -> review
+85542195: permissions -> review
+74545755: permissions -> review
+14488057: permissions -> review
+88281850: permissions -> review
+26095107: permissions -> review
+12360755: permissions -> review
+23300761: permissions -> review
+55247116: permissions -> review
+50773216: permissions -> review
+57231878: permissions -> review
+74715356: permissions -> review
+64322995: files -> review
+24930826: device -> review
+74466963: device -> review
+42226390: device -> review
+28596630: device -> review
+57195159: device -> review
+05479587: network -> review
+80615920: KVM -> review
+43643137: KVM -> review
+71456293: KVM -> review
+55367348: other -> review
+70021271: other -> review
+35170175: other -> review
+56937788: other -> review
+68897003: other -> review
+81775929: other -> review
+16201167: other -> review
+32484936: other -> review
+57756589: other -> review
+70416488: other -> review
+56309929: other -> review
+25842545: other -> review
+13442371: other -> review
+23270873: other -> review
+02364653: other -> review
+25892827: other -> review
+65781993: other -> review
+55753058: other -> review
+21247035: other -> review
+42974450: other -> review
+12869209: other -> review
+66743673: other -> review
+02572177: other -> review
+63565653: other -> review
+16228234: none -> review
+46572227: graphic -> review
+22219210: graphic -> review
+73660729: graphic -> review
+70868267: graphic -> review
+55961334: graphic -> review
+30680944: graphic -> review
+79834768: performance -> review
+80604314: performance -> review
+11933524: PID -> review
+70294255: PID -> review
+11357571: vnc -> review
+33802194: vnc -> review
+80570214: all -> review
+16056596: all -> review
+92957605: all -> review
+95154278: all -> review
+96782458: all -> review
+88225572: all -> review
+21221931: all -> review
+23448582: all -> review
+51610399: all -> review
+17743720: all -> review
+59540920: all -> review
+53568181: debug -> review
+36568044: debug -> review
diff --git a/results/classifier/zero-shot/010/KVM/04472277 b/results/classifier/zero-shot/010/KVM/04472277
new file mode 100644
index 00000000..df32085f
--- /dev/null
+++ b/results/classifier/zero-shot/010/KVM/04472277
@@ -0,0 +1,600 @@
+KVM: 0.890
+permissions: 0.851
+device: 0.849
+debug: 0.849
+network: 0.847
+graphic: 0.846
+other: 0.846
+performance: 0.841
+boot: 0.831
+vnc: 0.828
+PID: 0.826
+socket: 0.824
+semantic: 0.815
+files: 0.790
+KVM: 0.879
+debug: 0.772
+files: 0.742
+boot: 0.068
+other: 0.053
+PID: 0.025
+performance: 0.024
+socket: 0.017
+semantic: 0.015
+device: 0.010
+network: 0.007
+graphic: 0.003
+vnc: 0.003
+permissions: 0.002
+
+[BUG][KVM_SET_USER_MEMORY_REGION] KVM_SET_USER_MEMORY_REGION failed
+
+Hi all,
+I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
+Is there any one know this?
+The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
+```
+2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
+kvm_set_phys_mem: error registering slot: Invalid argument
+2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
+```
+The xml file
+```
+root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
+<!--
+WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
+OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
+  virsh edit instance-0000000e
+or other application using the libvirt API.
+-->
+<domain type='kvm'>
+  <name>instance-0000000e</name>
+  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
+  <metadata>
+    <nova:instance xmlns:nova="
+http://openstack.org/xmlns/libvirt/nova/1.1
+">
+      <nova:package version="25.1.0"/>
+      <nova:name>provider-instance</nova:name>
+      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
+      <nova:flavor name="cirros-os-dpu-test-1">
+        <nova:memory>64</nova:memory>
+        <nova:disk>1</nova:disk>
+        <nova:swap>0</nova:swap>
+        <nova:ephemeral>0</nova:ephemeral>
+        <nova:vcpus>1</nova:vcpus>
+      </nova:flavor>
+      <nova:owner>
+        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
+        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
+      </nova:owner>
+      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
+      <nova:ports>
+        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
+          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
+        </nova:port>
+      </nova:ports>
+    </nova:instance>
+  </metadata>
+  <memory unit='KiB'>65536</memory>
+  <currentMemory unit='KiB'>65536</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <sysinfo type='smbios'>
+    <system>
+      <entry name='manufacturer'>OpenStack Foundation</entry>
+      <entry name='product'>OpenStack Nova</entry>
+      <entry name='version'>25.1.0</entry>
+      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='family'>Virtual Machine</entry>
+    </system>
+  </sysinfo>
+  <os>
+    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
+    <boot dev='hd'/>
+    <smbios mode='sysinfo'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <vmcoreinfo state='on'/>
+  </features>
+  <cpu mode='host-model' check='partial'>
+    <topology sockets='1' dies='1' cores='1' threads='1'/>
+  </cpu>
+  <clock offset='utc'>
+    <timer name='pit' tickpolicy='delay'/>
+    <timer name='rtc' tickpolicy='catchup'/>
+    <timer name='hpet' present='no'/>
+  </clock>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu-system-x86_64</emulator>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='none'/>
+      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
+      <target dev='vda' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+    </disk>
+    <controller type='usb' index='0' model='piix3-uhci'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
+    <controller type='pci' index='0' model='pci-root'/>
+    <interface type='hostdev' managed='yes'>
+      <mac address='fa:16:3e:aa:d9:23'/>
+      <source>
+        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+    </interface>
+    <serial type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='isa-serial' port='0'>
+        <model name='isa-serial'/>
+      </target>
+    </serial>
+    <console type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='serial' port='0'/>
+    </console>
+    <input type='tablet' bus='usb'>
+      <address type='usb' bus='0' port='1'/>
+    </input>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
+      <listen type='address' address='0.0.0.0'/>
+    </graphics>
+    <audio id='1' type='none'/>
+    <video>
+      <model type='virtio' heads='1' primary='yes'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+    </video>
+    <hostdev mode='subsystem' type='pci' managed='yes'>
+      <source>
+        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
+    </hostdev>
+    <memballoon model='virtio'>
+      <stats period='10'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
+    </memballoon>
+    <rng model='virtio'>
+      <backend model='random'>/dev/urandom</backend>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
+    </rng>
+  </devices>
+</domain>
+```
+----
+Simon Jones
+
+This is happened in ubuntu22.04.
+QEMU is install by apt like this:
+apt install -y qemu qemu-kvm qemu-system
+and QEMU version is 6.2.0
+----
+Simon Jones
+Simon Jones <
+batmanustc@gmail.com
+> 于2023年3月21日周二 08:40写道：
+Hi all,
+I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
+Is there any one know this?
+The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
+```
+2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
+kvm_set_phys_mem: error registering slot: Invalid argument
+2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
+```
+The xml file
+```
+root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
+<!--
+WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
+OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
+  virsh edit instance-0000000e
+or other application using the libvirt API.
+-->
+<domain type='kvm'>
+  <name>instance-0000000e</name>
+  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
+  <metadata>
+    <nova:instance xmlns:nova="
+http://openstack.org/xmlns/libvirt/nova/1.1
+">
+      <nova:package version="25.1.0"/>
+      <nova:name>provider-instance</nova:name>
+      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
+      <nova:flavor name="cirros-os-dpu-test-1">
+        <nova:memory>64</nova:memory>
+        <nova:disk>1</nova:disk>
+        <nova:swap>0</nova:swap>
+        <nova:ephemeral>0</nova:ephemeral>
+        <nova:vcpus>1</nova:vcpus>
+      </nova:flavor>
+      <nova:owner>
+        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
+        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
+      </nova:owner>
+      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
+      <nova:ports>
+        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
+          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
+        </nova:port>
+      </nova:ports>
+    </nova:instance>
+  </metadata>
+  <memory unit='KiB'>65536</memory>
+  <currentMemory unit='KiB'>65536</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <sysinfo type='smbios'>
+    <system>
+      <entry name='manufacturer'>OpenStack Foundation</entry>
+      <entry name='product'>OpenStack Nova</entry>
+      <entry name='version'>25.1.0</entry>
+      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='family'>Virtual Machine</entry>
+    </system>
+  </sysinfo>
+  <os>
+    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
+    <boot dev='hd'/>
+    <smbios mode='sysinfo'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <vmcoreinfo state='on'/>
+  </features>
+  <cpu mode='host-model' check='partial'>
+    <topology sockets='1' dies='1' cores='1' threads='1'/>
+  </cpu>
+  <clock offset='utc'>
+    <timer name='pit' tickpolicy='delay'/>
+    <timer name='rtc' tickpolicy='catchup'/>
+    <timer name='hpet' present='no'/>
+  </clock>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu-system-x86_64</emulator>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='none'/>
+      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
+      <target dev='vda' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+    </disk>
+    <controller type='usb' index='0' model='piix3-uhci'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
+    <controller type='pci' index='0' model='pci-root'/>
+    <interface type='hostdev' managed='yes'>
+      <mac address='fa:16:3e:aa:d9:23'/>
+      <source>
+        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+    </interface>
+    <serial type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='isa-serial' port='0'>
+        <model name='isa-serial'/>
+      </target>
+    </serial>
+    <console type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='serial' port='0'/>
+    </console>
+    <input type='tablet' bus='usb'>
+      <address type='usb' bus='0' port='1'/>
+    </input>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
+      <listen type='address' address='0.0.0.0'/>
+    </graphics>
+    <audio id='1' type='none'/>
+    <video>
+      <model type='virtio' heads='1' primary='yes'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+    </video>
+    <hostdev mode='subsystem' type='pci' managed='yes'>
+      <source>
+        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
+    </hostdev>
+    <memballoon model='virtio'>
+      <stats period='10'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
+    </memballoon>
+    <rng model='virtio'>
+      <backend model='random'>/dev/urandom</backend>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
+    </rng>
+  </devices>
+</domain>
+```
+----
+Simon Jones
+
+This is full ERROR log
+2023-03-23 08:00:52.362+0000: starting up libvirt version: 8.0.0, package: 1ubuntu7.4 (Christian Ehrhardt <
+christian.ehrhardt@canonical.com
+> Tue, 22 Nov 2022 15:59:28 +0100), qemu version: 6.2.0Debian 1:6.2+dfsg-2ubuntu6.6, kernel: 5.19.0-35-generic, hostname: c1c2
+LC_ALL=C \
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin \
+HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e \
+XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.local/share \
+XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.cache \
+XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-4-instance-0000000e/.config \
+/usr/bin/qemu-system-x86_64 \
+-name guest=instance-0000000e,debug-threads=on \
+-S \
+-object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-4-instance-0000000e/master-key.aes"}' \
+-machine pc-i440fx-6.2,usb=off,dump-guest-core=off,memory-backend=pc.ram \
+-accel kvm \
+-cpu Cooperlake,ss=on,vmx=on,pdcm=on,hypervisor=on,tsc-adjust=on,sha-ni=on,umip=on,waitpkg=on,gfni=on,vaes=on,vpclmulqdq=on,rdpid=on,movdiri=on,movdir64b=on,fsrm=on,md-clear=on,avx-vnni=on,xsaves=on,ibpb=on,ibrs=on,amd-stibp=on,amd-ssbd=on,hle=off,rtm=off,avx512f=off,avx512dq=off,avx512cd=off,avx512bw=off,avx512vl=off,avx512vnni=off,avx512-bf16=off,taa-no=off \
+-m 64 \
+-object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":67108864}' \
+-overcommit mem-lock=off \
+-smp 1,sockets=1,dies=1,cores=1,threads=1 \
+-uuid ff91d2dc-69a1-43ef-abde-c9e4e9a0305b \
+-smbios 'type=1,manufacturer=OpenStack Foundation,product=OpenStack Nova,version=25.1.0,serial=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,uuid=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,family=Virtual Machine' \
+-no-user-config \
+-nodefaults \
+-chardev socket,id=charmonitor,fd=33,server=on,wait=off \
+-mon chardev=charmonitor,id=monitor,mode=control \
+-rtc base=utc,driftfix=slew \
+-global kvm-pit.lost_tick_policy=delay \
+-no-hpet \
+-no-shutdown \
+-boot strict=on \
+-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
+-blockdev '{"driver":"file","filename":"/var/lib/nova/instances/_base/8b58db82a488248e7c5e769599954adaa47a5314","node-name":"libvirt-2-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
+-blockdev '{"node-name":"libvirt-2-format","read-only":true,"cache":{"direct":true,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \
+-blockdev '{"driver":"file","filename":"/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk","node-name":"libvirt-1-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
+-blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":"libvirt-2-format"}' \
+-device virtio-blk-pci,bus=pci.0,addr=0x3,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=on \
+-add-fd set=1,fd=34 \
+-chardev pty,id=charserial0,logfile=/dev/fdset/1,logappend=on \
+-device isa-serial,chardev=charserial0,id=serial0 \
+-device usb-tablet,id=input0,bus=usb.0,port=1 \
+-audiodev '{"id":"audio1","driver":"none"}' \
+-vnc
+0.0.0.0:0
+,audiodev=audio1 \
+-device virtio-vga,id=video0,max_outputs=1,bus=pci.0,addr=0x2 \
+-device vfio-pci,host=0000:01:00.5,id=hostdev0,bus=pci.0,addr=0x4 \
+-device vfio-pci,host=0000:01:00.6,id=hostdev1,bus=pci.0,addr=0x5 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \
+-object '{"qom-type":"rng-random","id":"objrng0","filename":"/dev/urandom"}' \
+-device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 \
+-device vmcoreinfo \
+-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
+-msg timestamp=on
+char device redirected to /dev/pts/3 (label charserial0)
+2023-03-23T08:00:53.728550Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
+kvm_set_phys_mem: error registering slot: Invalid argument
+2023-03-23 08:00:54.201+0000: shutting down, reason=crashed
+2023-03-23 08:54:43.468+0000: starting up libvirt version: 8.0.0, package: 1ubuntu7.4 (Christian Ehrhardt <
+christian.ehrhardt@canonical.com
+> Tue, 22 Nov 2022 15:59:28 +0100), qemu version: 6.2.0Debian 1:6.2+dfsg-2ubuntu6.6, kernel: 5.19.0-35-generic, hostname: c1c2
+LC_ALL=C \
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin \
+HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e \
+XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.local/share \
+XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.cache \
+XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-5-instance-0000000e/.config \
+/usr/bin/qemu-system-x86_64 \
+-name guest=instance-0000000e,debug-threads=on \
+-S \
+-object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-5-instance-0000000e/master-key.aes"}' \
+-machine pc-i440fx-6.2,usb=off,dump-guest-core=off,memory-backend=pc.ram \
+-accel kvm \
+-cpu Cooperlake,ss=on,vmx=on,pdcm=on,hypervisor=on,tsc-adjust=on,sha-ni=on,umip=on,waitpkg=on,gfni=on,vaes=on,vpclmulqdq=on,rdpid=on,movdiri=on,movdir64b=on,fsrm=on,md-clear=on,avx-vnni=on,xsaves=on,ibpb=on,ibrs=on,amd-stibp=on,amd-ssbd=on,hle=off,rtm=off,avx512f=off,avx512dq=off,avx512cd=off,avx512bw=off,avx512vl=off,avx512vnni=off,avx512-bf16=off,taa-no=off \
+-m 64 \
+-object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":67108864}' \
+-overcommit mem-lock=off \
+-smp 1,sockets=1,dies=1,cores=1,threads=1 \
+-uuid ff91d2dc-69a1-43ef-abde-c9e4e9a0305b \
+-smbios 'type=1,manufacturer=OpenStack Foundation,product=OpenStack Nova,version=25.1.0,serial=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,uuid=ff91d2dc-69a1-43ef-abde-c9e4e9a0305b,family=Virtual Machine' \
+-no-user-config \
+-nodefaults \
+-chardev socket,id=charmonitor,fd=33,server=on,wait=off \
+-mon chardev=charmonitor,id=monitor,mode=control \
+-rtc base=utc,driftfix=slew \
+-global kvm-pit.lost_tick_policy=delay \
+-no-hpet \
+-no-shutdown \
+-boot strict=on \
+-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
+-blockdev '{"driver":"file","filename":"/var/lib/nova/instances/_base/8b58db82a488248e7c5e769599954adaa47a5314","node-name":"libvirt-2-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
+-blockdev '{"node-name":"libvirt-2-format","read-only":true,"cache":{"direct":true,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \
+-blockdev '{"driver":"file","filename":"/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk","node-name":"libvirt-1-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
+-blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":"libvirt-2-format"}' \
+-device virtio-blk-pci,bus=pci.0,addr=0x3,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=on \
+-add-fd set=1,fd=34 \
+-chardev pty,id=charserial0,logfile=/dev/fdset/1,logappend=on \
+-device isa-serial,chardev=charserial0,id=serial0 \
+-device usb-tablet,id=input0,bus=usb.0,port=1 \
+-audiodev '{"id":"audio1","driver":"none"}' \
+-vnc
+0.0.0.0:0
+,audiodev=audio1 \
+-device virtio-vga,id=video0,max_outputs=1,bus=pci.0,addr=0x2 \
+-device vfio-pci,host=0000:01:00.5,id=hostdev0,bus=pci.0,addr=0x4 \
+-device vfio-pci,host=0000:01:00.6,id=hostdev1,bus=pci.0,addr=0x5 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \
+-object '{"qom-type":"rng-random","id":"objrng0","filename":"/dev/urandom"}' \
+-device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 \
+-device vmcoreinfo \
+-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
+-msg timestamp=on
+char device redirected to /dev/pts/3 (label charserial0)
+2023-03-23T08:54:44.755039Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
+kvm_set_phys_mem: error registering slot: Invalid argument
+2023-03-23 08:54:45.230+0000: shutting down, reason=crashed
+----
+Simon Jones
+Simon Jones <
+batmanustc@gmail.com
+> 于2023年3月23日周四 05:49写道：
+This is happened in ubuntu22.04.
+QEMU is install by apt like this:
+apt install -y qemu qemu-kvm qemu-system
+and QEMU version is 6.2.0
+----
+Simon Jones
+Simon Jones <
+batmanustc@gmail.com
+> 于2023年3月21日周二 08:40写道：
+Hi all,
+I start a VM in openstack, and openstack use libvirt to start qemu VM, but now log show this ERROR.
+Is there any one know this?
+The ERROR log from /var/log/libvirt/qemu/instance-0000000e.log
+```
+2023-03-14T10:09:17.674114Z qemu-system-x86_64: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION failed, slot=4, start=0xfffffffffe000000, size=0x2000: Invalid argument
+kvm_set_phys_mem: error registering slot: Invalid argument
+2023-03-14 10:09:18.198+0000: shutting down, reason=crashed
+```
+The xml file
+```
+root@c1c2:~# cat /etc/libvirt/qemu/instance-0000000e.xml
+<!--
+WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
+OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
+  virsh edit instance-0000000e
+or other application using the libvirt API.
+-->
+<domain type='kvm'>
+  <name>instance-0000000e</name>
+  <uuid>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</uuid>
+  <metadata>
+    <nova:instance xmlns:nova="
+http://openstack.org/xmlns/libvirt/nova/1.1
+">
+      <nova:package version="25.1.0"/>
+      <nova:name>provider-instance</nova:name>
+      <nova:creationTime>2023-03-14 10:09:13</nova:creationTime>
+      <nova:flavor name="cirros-os-dpu-test-1">
+        <nova:memory>64</nova:memory>
+        <nova:disk>1</nova:disk>
+        <nova:swap>0</nova:swap>
+        <nova:ephemeral>0</nova:ephemeral>
+        <nova:vcpus>1</nova:vcpus>
+      </nova:flavor>
+      <nova:owner>
+        <nova:user uuid="ff627ad39ed94479b9c5033bc462cf78">admin</nova:user>
+        <nova:project uuid="512866f9994f4ad8916d8539a7cdeec9">admin</nova:project>
+      </nova:owner>
+      <nova:root type="image" uuid="9e58cb69-316a-4093-9f23-c1d1bd8edffe"/>
+      <nova:ports>
+        <nova:port uuid="77c1dc00-af39-4463-bea0-12808f4bc340">
+          <nova:ip type="fixed" address="172.1.1.43" ipVersion="4"/>
+        </nova:port>
+      </nova:ports>
+    </nova:instance>
+  </metadata>
+  <memory unit='KiB'>65536</memory>
+  <currentMemory unit='KiB'>65536</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <sysinfo type='smbios'>
+    <system>
+      <entry name='manufacturer'>OpenStack Foundation</entry>
+      <entry name='product'>OpenStack Nova</entry>
+      <entry name='version'>25.1.0</entry>
+      <entry name='serial'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='uuid'>ff91d2dc-69a1-43ef-abde-c9e4e9a0305b</entry>
+      <entry name='family'>Virtual Machine</entry>
+    </system>
+  </sysinfo>
+  <os>
+    <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type>
+    <boot dev='hd'/>
+    <smbios mode='sysinfo'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <vmcoreinfo state='on'/>
+  </features>
+  <cpu mode='host-model' check='partial'>
+    <topology sockets='1' dies='1' cores='1' threads='1'/>
+  </cpu>
+  <clock offset='utc'>
+    <timer name='pit' tickpolicy='delay'/>
+    <timer name='rtc' tickpolicy='catchup'/>
+    <timer name='hpet' present='no'/>
+  </clock>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu-system-x86_64</emulator>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='none'/>
+      <source file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/disk'/>
+      <target dev='vda' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+    </disk>
+    <controller type='usb' index='0' model='piix3-uhci'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
+    <controller type='pci' index='0' model='pci-root'/>
+    <interface type='hostdev' managed='yes'>
+      <mac address='fa:16:3e:aa:d9:23'/>
+      <source>
+        <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x5'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+    </interface>
+    <serial type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='isa-serial' port='0'>
+        <model name='isa-serial'/>
+      </target>
+    </serial>
+    <console type='pty'>
+      <log file='/var/lib/nova/instances/ff91d2dc-69a1-43ef-abde-c9e4e9a0305b/console.log' append='off'/>
+      <target type='serial' port='0'/>
+    </console>
+    <input type='tablet' bus='usb'>
+      <address type='usb' bus='0' port='1'/>
+    </input>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
+      <listen type='address' address='0.0.0.0'/>
+    </graphics>
+    <audio id='1' type='none'/>
+    <video>
+      <model type='virtio' heads='1' primary='yes'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+    </video>
+    <hostdev mode='subsystem' type='pci' managed='yes'>
+      <source>
+        <address domain='0x0000' bus='0x01' slot='0x00' function='0x6'/>
+      </source>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
+    </hostdev>
+    <memballoon model='virtio'>
+      <stats period='10'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
+    </memballoon>
+    <rng model='virtio'>
+      <backend model='random'>/dev/urandom</backend>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
+    </rng>
+  </devices>
+</domain>
+```
+----
+Simon Jones
+
diff --git a/results/classifier/zero-shot/010/README.md b/results/classifier/zero-shot/010/README.md
new file mode 100644
index 00000000..34746d1b
--- /dev/null
+++ b/results/classifier/zero-shot/010/README.md
@@ -0,0 +1,10 @@
+## 010
+
+```python
+multi_label = True
+model = "facebook/bart-large-mnli"
+compare = "MoritzLaurer/deberta-v3-large-zeroshot-v2.0"
+number_bugs = 89
+```
+
+Adds another model and compares both results. If the models disagree, put the bug into *review*.
diff --git a/results/classifier/zero-shot/010/boot/60339453 b/results/classifier/zero-shot/010/boot/60339453
new file mode 100644
index 00000000..e1da8a22
--- /dev/null
+++ b/results/classifier/zero-shot/010/boot/60339453
@@ -0,0 +1,85 @@
+boot: 0.782
+other: 0.776
+performance: 0.764
+permissions: 0.750
+device: 0.706
+PID: 0.685
+network: 0.682
+vnc: 0.680
+debug: 0.672
+graphic: 0.671
+KVM: 0.669
+semantic: 0.662
+files: 0.623
+socket: 0.607
+boot: 0.878
+debug: 0.165
+PID: 0.021
+files: 0.020
+performance: 0.019
+device: 0.018
+other: 0.010
+semantic: 0.009
+socket: 0.004
+KVM: 0.003
+network: 0.003
+permissions: 0.003
+vnc: 0.002
+graphic: 0.001
+
+[BUG] scsi: vmw_pvscsi: Boot hangs during scsi under qemu, post commit e662502b3a78
+
+Hi,
+
+Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length"),
+and its backports to stable trees, makes kernel hang during boot, when
+ran as a VM under qemu with following parameters:
+
+  -drive file=$DISKFILE,if=none,id=sda
+  -device pvscsi
+  -device scsi-hd,bus=scsi.0,drive=sda
+
+Diving deeper, commit e662502b3a78
+
+  @@ -585,7 +585,13 @@ static void pvscsi_complete_request(struct 
+pvscsi_adapter *adapter,
+                case BTSTAT_SUCCESS:
+  +                     /*
+  +                      * Commands like INQUIRY may transfer less data than
+  +                      * requested by the initiator via bufflen. Set residual
+  +                      * count to make upper layer aware of the actual amount
+  +                      * of data returned.
+  +                      */
+  +                     scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
+
+assumes 'e->dataLen' is properly armed with actual num of bytes
+transferred; alas qemu's hw/scsi/vmw_pvscsi.c never arms the 'dataLen'
+field of the completion descriptor (kept zero).
+
+As a result, the residual count is set as the *entire* 'scsi_bufflen' of a
+good transfer, which makes upper scsi layers repeatedly ignore this
+valid transfer.
+
+Not properly arming 'dataLen' seems as an oversight in qemu, which needs
+to be fixed.
+
+However, since kernels with commit e662502b3a78 (and backports) now fail
+to boot under qemu's "-device pvscsi", a suggested workaround is to set
+the residual count *only* if 'e->dataLen' is armed, e.g:
+
+  @@ -588,7 +588,8 @@ static void pvscsi_complete_request(struct pvscsi_adapter 
+*adapter,
+                           * count to make upper layer aware of the actual 
+amount
+                           * of data returned.
+                           */
+  -                       scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
+  +                       if (e->dataLen)
+  +                               scsi_set_resid(cmd, scsi_bufflen(cmd) - 
+e->dataLen);
+
+in order to make kernels boot on old qemu binaries.
+
+Best,
+Shmulik
+
diff --git a/results/classifier/zero-shot/010/categories.csv b/results/classifier/zero-shot/010/categories.csv
new file mode 100644
index 00000000..6e08b557
--- /dev/null
+++ b/results/classifier/zero-shot/010/categories.csv
@@ -0,0 +1,8 @@
+category, count
+KVM, 1
+debug, 2
+network, 1
+review, 77
+boot, 1
+none, 1
+semantic, 6
diff --git a/results/classifier/zero-shot/010/debug/24190340 b/results/classifier/zero-shot/010/debug/24190340
new file mode 100644
index 00000000..a86788d8
--- /dev/null
+++ b/results/classifier/zero-shot/010/debug/24190340
@@ -0,0 +1,2080 @@
+debug: 0.876
+permissions: 0.851
+device: 0.832
+performance: 0.832
+other: 0.811
+vnc: 0.808
+boot: 0.803
+semantic: 0.793
+KVM: 0.776
+graphic: 0.775
+files: 0.770
+PID: 0.762
+network: 0.723
+socket: 0.715
+debug: 0.831
+KVM: 0.485
+PID: 0.069
+performance: 0.059
+socket: 0.056
+other: 0.017
+device: 0.015
+network: 0.012
+files: 0.011
+semantic: 0.008
+vnc: 0.008
+graphic: 0.003
+permissions: 0.002
+boot: 0.002
+
+[BUG, RFC] Block graph deadlock on job-dismiss
+
+Hi all,
+
+There's a bug in block layer which leads to block graph deadlock.
+Notably, it takes place when blockdev IO is processed within a separate
+iothread.
+
+This was initially caught by our tests, and I was able to reduce it to a
+relatively simple reproducer.  Such deadlocks are probably supposed to
+be covered in iotests/graph-changes-while-io, but this deadlock isn't.
+
+Basically what the reproducer does is launches QEMU with a drive having
+'iothread' option set, creates a chain of 2 snapshots, launches
+block-commit job for a snapshot and then dismisses the job, starting
+from the lower snapshot.  If the guest is issuing IO at the same time,
+there's a race in acquiring block graph lock and a potential deadlock.
+
+Here's how it can be reproduced:
+
+1. Run QEMU:
+>
+SRCDIR=/path/to/srcdir
+>
+>
+>
+>
+>
+$SRCDIR/build/qemu-system-x86_64 -enable-kvm \
+>
+>
+-machine q35 -cpu Nehalem \
+>
+>
+-name guest=alma8-vm,debug-threads=on \
+>
+>
+-m 2g -smp 2 \
+>
+>
+-nographic -nodefaults \
+>
+>
+-qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
+>
+>
+-serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
+>
+>
+-object iothread,id=iothread0 \
+>
+>
+-blockdev
+>
+node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
+>
+\
+>
+-device virtio-blk-pci,drive=disk,iothread=iothread0
+2. Launch IO (random reads) from within the guest:
+>
+nc -U /var/run/alma8-serial.sock
+>
+...
+>
+[root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k
+>
+--size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting
+>
+--rw=randread --iodepth=1 --filename=/testfile
+3. Run snapshots creation & removal of lower snapshot operation in a
+loop (script attached):
+>
+while /bin/true ; do ./remove_lower_snap.sh ; done
+And then it occasionally hangs.
+
+Note: I've tried bisecting this, and looks like deadlock occurs starting
+from the following commit:
+
+(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
+(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
+
+On the latest v10.0.0 it does hang as well.
+
+
+Here's backtrace of the main thread:
+
+>
+#0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
+>
+timeout=<optimized out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:43
+>
+#1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
+>
+timeout=-1) at ../util/qemu-timer.c:329
+>
+#2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
+>
+ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
+>
+#3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at
+>
+../util/aio-posix.c:730
+>
+#4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
+>
+parent=0x0, poll=true) at ../block/io.c:378
+>
+#5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
+>
+../block/io.c:391
+>
+#6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7682
+>
+#7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7608
+>
+#8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7668
+>
+#9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7608
+>
+#10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7668
+>
+#11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7608
+>
+#12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../blockjob.c:157
+>
+#13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7592
+>
+#14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7661
+>
+#15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
+>
+(child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 =
+>
+{...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
+>
+#16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7592
+>
+#17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+errp=0x0)
+>
+at ../block.c:7661
+>
+#18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0,
+>
+ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
+>
+#19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at
+>
+../block.c:3317
+>
+#20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at
+>
+../blockjob.c:209
+>
+#21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
+>
+../blockjob.c:82
+>
+#22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
+>
+../job.c:474
+>
+#23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
+>
+../job.c:771
+>
+#24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
+>
+errp=0x7ffd94b4f488) at ../job.c:783
+>
+--Type <RET> for more, q to quit, c to continue without paging--
+>
+#25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0 "commit-snap1",
+>
+errp=0x7ffd94b4f488) at ../job-qmp.c:138
+>
+#26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
+>
+ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
+>
+#27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
+>
+../qapi/qmp-dispatch.c:128
+>
+#28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
+>
+../util/async.c:172
+>
+#29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
+>
+../util/async.c:219
+>
+#30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
+>
+../util/aio-posix.c:436
+>
+#31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
+>
+callback=0x0, user_data=0x0) at ../util/async.c:361
+>
+#32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
+>
+../glib/gmain.c:3364
+>
+#33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
+>
+#34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
+>
+#35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
+>
+../util/main-loop.c:310
+>
+#36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
+>
+../util/main-loop.c:589
+>
+#37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
+>
+#38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
+>
+../system/main.c:50
+>
+#39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
+>
+../system/main.c:80
+And here's coroutine trying to acquire read lock:
+
+>
+(gdb) qemu coroutine reader_queue->entries.sqh_first
+>
+#0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
+>
+to_=0x7fc537fff508, action=COROUTINE_YIELD) at
+>
+../util/coroutine-ucontext.c:321
+>
+#1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
+>
+../util/qemu-coroutine.c:339
+>
+#2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
+>
+<reader_queue>, lock=0x7fc53c57de50, flags=0) at
+>
+../util/qemu-coroutine-lock.c:60
+>
+#3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at ../block/graph-lock.c:231
+>
+#4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at
+>
+/home/root/src/qemu/master/include/block/graph-lock.h:213
+>
+#5  0x0000557eb460fa41 in blk_co_do_preadv_part
+>
+(blk=0x557eb84c0810, offset=6890553344, bytes=4096, qiov=0x7fc530006988,
+>
+qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at ../block/block-backend.c:1339
+>
+#6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
+>
+../block/block-backend.c:1619
+>
+#7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886) at
+>
+../util/coroutine-ucontext.c:175
+>
+#8  0x00007fc547c2a360 in __start_context () at
+>
+../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
+>
+#9  0x00007ffd94b4ea40 in  ()
+>
+#10 0x0000000000000000 in  ()
+So it looks like main thread is processing job-dismiss request and is
+holding write lock taken in block_job_remove_all_bdrv() (frame #20
+above).  At the same time iothread spawns a coroutine which performs IO
+request.  Before the coroutine is spawned, blk_aio_prwv() increases
+'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+trying to acquire the read lock.  But main thread isn't releasing the
+lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+Here's the deadlock.
+
+Any comments and suggestions on the subject are welcomed.  Thanks!
+
+Andrey
+remove_lower_snap.sh
+Description:
+application/shellscript
+
+On 4/24/25 8:32 PM, Andrey Drobyshev wrote:
+>
+Hi all,
+>
+>
+There's a bug in block layer which leads to block graph deadlock.
+>
+Notably, it takes place when blockdev IO is processed within a separate
+>
+iothread.
+>
+>
+This was initially caught by our tests, and I was able to reduce it to a
+>
+relatively simple reproducer.  Such deadlocks are probably supposed to
+>
+be covered in iotests/graph-changes-while-io, but this deadlock isn't.
+>
+>
+Basically what the reproducer does is launches QEMU with a drive having
+>
+'iothread' option set, creates a chain of 2 snapshots, launches
+>
+block-commit job for a snapshot and then dismisses the job, starting
+>
+from the lower snapshot.  If the guest is issuing IO at the same time,
+>
+there's a race in acquiring block graph lock and a potential deadlock.
+>
+>
+Here's how it can be reproduced:
+>
+>
+[...]
+>
+I took a closer look at iotests/graph-changes-while-io, and have managed
+to reproduce the same deadlock in a much simpler setup, without a guest.
+
+1. Run QSD:> ./build/storage-daemon/qemu-storage-daemon --object
+iothread,id=iothread0 \
+>
+--blockdev null-co,node-name=node0,read-zeroes=true \
+>
+>
+--nbd-server addr.type=unix,addr.path=/var/run/qsd_nbd.sock \
+>
+>
+--export
+>
+nbd,id=exp0,node-name=node0,iothread=iothread0,fixed-iothread=true,writable=true
+>
+\
+>
+--chardev
+>
+socket,id=qmp-sock,path=/var/run/qsd_qmp.sock,server=on,wait=off \
+>
+--monitor chardev=qmp-sock
+2. Launch IO:
+>
+qemu-img bench -f raw -c 2000000
+>
+'nbd+unix:///node0?socket=/var/run/qsd_nbd.sock'
+3. Add 2 snapshots and remove lower one (script attached):> while
+/bin/true ; do ./rls_qsd.sh ; done
+
+And then it hangs.
+
+I'll also send a patch with corresponding test case added directly to
+iotests.
+
+This reproduce seems to be hanging starting from Fiona's commit
+67446e605dc ("blockjob: drop AioContext lock before calling
+bdrv_graph_wrlock()").  AioContext locks were dropped entirely later on
+in Stefan's commit b49f4755c7 ("block: remove AioContext locking"), but
+the problem remains.
+
+Andrey
+rls_qsd.sh
+Description:
+application/shellscript
+
+From: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
+
+This case is catching potential deadlock which takes place when job-dismiss
+is issued when I/O requests are processed in a separate iothread.
+
+See
+https://mail.gnu.org/archive/html/qemu-devel/2025-04/msg04421.html
+Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
+---
+ .../qemu-iotests/tests/graph-changes-while-io | 101 ++++++++++++++++--
+ .../tests/graph-changes-while-io.out          |   4 +-
+ 2 files changed, 96 insertions(+), 9 deletions(-)
+
+diff --git a/tests/qemu-iotests/tests/graph-changes-while-io 
+b/tests/qemu-iotests/tests/graph-changes-while-io
+index 194fda500e..e30f823da4 100755
+--- a/tests/qemu-iotests/tests/graph-changes-while-io
++++ b/tests/qemu-iotests/tests/graph-changes-while-io
+@@ -27,6 +27,8 @@ from iotests import imgfmt, qemu_img, qemu_img_create, 
+qemu_io, \
+ 
+ 
+ top = os.path.join(iotests.test_dir, 'top.img')
++snap1 = os.path.join(iotests.test_dir, 'snap1.img')
++snap2 = os.path.join(iotests.test_dir, 'snap2.img')
+ nbd_sock = os.path.join(iotests.sock_dir, 'nbd.sock')
+ 
+ 
+@@ -58,6 +60,15 @@ class TestGraphChangesWhileIO(QMPTestCase):
+     def tearDown(self) -> None:
+         self.qsd.stop()
+ 
++    def _wait_for_blockjob(self, status) -> None:
++        done = False
++        while not done:
++            for event in self.qsd.get_qmp().get_events(wait=10.0):
++                if event['event'] != 'JOB_STATUS_CHANGE':
++                    continue
++                if event['data']['status'] == status:
++                    done = True
++
+     def test_blockdev_add_while_io(self) -> None:
+         # Run qemu-img bench in the background
+         bench_thr = Thread(target=do_qemu_img_bench)
+@@ -116,13 +127,89 @@ class TestGraphChangesWhileIO(QMPTestCase):
+                 'device': 'job0',
+             })
+ 
+-            cancelled = False
+-            while not cancelled:
+-                for event in self.qsd.get_qmp().get_events(wait=10.0):
+-                    if event['event'] != 'JOB_STATUS_CHANGE':
+-                        continue
+-                    if event['data']['status'] == 'null':
+-                        cancelled = True
++            self._wait_for_blockjob('null')
++
++        bench_thr.join()
++
++    def test_remove_lower_snapshot_while_io(self) -> None:
++        # Run qemu-img bench in the background
++        bench_thr = Thread(target=do_qemu_img_bench, args=(100000, ))
++        bench_thr.start()
++
++        # While I/O is performed on 'node0' node, consequently add 2 snapshots
++        # on top of it, then remove (commit) them starting from lower one.
++        while bench_thr.is_alive():
++            # Recreate snapshot images on every iteration
++            qemu_img_create('-f', imgfmt, snap1, '1G')
++            qemu_img_create('-f', imgfmt, snap2, '1G')
++
++            self.qsd.cmd('blockdev-add', {
++                'driver': imgfmt,
++                'node-name': 'snap1',
++                'file': {
++                    'driver': 'file',
++                    'filename': snap1
++                }
++            })
++
++            self.qsd.cmd('blockdev-snapshot', {
++                'node': 'node0',
++                'overlay': 'snap1',
++            })
++
++            self.qsd.cmd('blockdev-add', {
++                'driver': imgfmt,
++                'node-name': 'snap2',
++                'file': {
++                    'driver': 'file',
++                    'filename': snap2
++                }
++            })
++
++            self.qsd.cmd('blockdev-snapshot', {
++                'node': 'snap1',
++                'overlay': 'snap2',
++            })
++
++            self.qsd.cmd('block-commit', {
++                'job-id': 'commit-snap1',
++                'device': 'snap2',
++                'top-node': 'snap1',
++                'base-node': 'node0',
++                'auto-finalize': True,
++                'auto-dismiss': False,
++            })
++
++            self._wait_for_blockjob('concluded')
++            self.qsd.cmd('job-dismiss', {
++                'id': 'commit-snap1',
++            })
++
++            self.qsd.cmd('block-commit', {
++                'job-id': 'commit-snap2',
++                'device': 'snap2',
++                'top-node': 'snap2',
++                'base-node': 'node0',
++                'auto-finalize': True,
++                'auto-dismiss': False,
++            })
++
++            self._wait_for_blockjob('ready')
++            self.qsd.cmd('job-complete', {
++                'id': 'commit-snap2',
++            })
++
++            self._wait_for_blockjob('concluded')
++            self.qsd.cmd('job-dismiss', {
++                'id': 'commit-snap2',
++            })
++
++            self.qsd.cmd('blockdev-del', {
++                'node-name': 'snap1'
++            })
++            self.qsd.cmd('blockdev-del', {
++                'node-name': 'snap2'
++            })
+ 
+         bench_thr.join()
+ 
+diff --git a/tests/qemu-iotests/tests/graph-changes-while-io.out 
+b/tests/qemu-iotests/tests/graph-changes-while-io.out
+index fbc63e62f8..8d7e996700 100644
+--- a/tests/qemu-iotests/tests/graph-changes-while-io.out
++++ b/tests/qemu-iotests/tests/graph-changes-while-io.out
+@@ -1,5 +1,5 @@
+-..
++...
+ ----------------------------------------------------------------------
+-Ran 2 tests
++Ran 3 tests
+ 
+ OK
+-- 
+2.43.5
+
+Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
+>
+So it looks like main thread is processing job-dismiss request and is
+>
+holding write lock taken in block_job_remove_all_bdrv() (frame #20
+>
+above).  At the same time iothread spawns a coroutine which performs IO
+>
+request.  Before the coroutine is spawned, blk_aio_prwv() increases
+>
+'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+>
+trying to acquire the read lock.  But main thread isn't releasing the
+>
+lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+>
+Here's the deadlock.
+And for the IO test you provided, it's client->nb_requests that behaves
+similarly to blk->in_flight here.
+
+The issue also reproduces easily when issuing the following QMP command
+in a loop while doing IO on a device:
+
+>
+void qmp_block_locked_drain(const char *node_name, Error **errp)
+>
+{
+>
+BlockDriverState *bs;
+>
+>
+bs = bdrv_find_node(node_name);
+>
+if (!bs) {
+>
+error_setg(errp, "node not found");
+>
+return;
+>
+}
+>
+>
+bdrv_graph_wrlock();
+>
+bdrv_drained_begin(bs);
+>
+bdrv_drained_end(bs);
+>
+bdrv_graph_wrunlock();
+>
+}
+It seems like either it would be necessary to require:
+1. not draining inside an exclusively locked section
+or
+2. making sure that variables used by drained_poll routines are only set
+while holding the reader lock
+?
+
+Those seem to require rather involved changes, so a third option might
+be to make draining inside an exclusively locked section possible, by
+embedding such locked sections in a drained section:
+
+>
+diff --git a/blockjob.c b/blockjob.c
+>
+index 32007f31a9..9b2f3b3ea9 100644
+>
+--- a/blockjob.c
+>
++++ b/blockjob.c
+>
+@@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+* one to make sure that such a concurrent access does not attempt
+>
+* to process an already freed BdrvChild.
+>
+*/
+>
++    bdrv_drain_all_begin();
+>
+bdrv_graph_wrlock();
+>
+while (job->nodes) {
+>
+GSList *l = job->nodes;
+>
+@@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+g_slist_free_1(l);
+>
+}
+>
+bdrv_graph_wrunlock();
+>
++    bdrv_drain_all_end();
+>
+}
+>
+>
+bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
+This seems to fix the issue at hand. I can send a patch if this is
+considered an acceptable approach.
+
+Best Regards,
+Fiona
+
+On 4/30/25 11:47 AM, Fiona Ebner wrote:
+>
+Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
+>
+> So it looks like main thread is processing job-dismiss request and is
+>
+> holding write lock taken in block_job_remove_all_bdrv() (frame #20
+>
+> above).  At the same time iothread spawns a coroutine which performs IO
+>
+> request.  Before the coroutine is spawned, blk_aio_prwv() increases
+>
+> 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+>
+> trying to acquire the read lock.  But main thread isn't releasing the
+>
+> lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+>
+> Here's the deadlock.
+>
+>
+And for the IO test you provided, it's client->nb_requests that behaves
+>
+similarly to blk->in_flight here.
+>
+>
+The issue also reproduces easily when issuing the following QMP command
+>
+in a loop while doing IO on a device:
+>
+>
+> void qmp_block_locked_drain(const char *node_name, Error **errp)
+>
+> {
+>
+>     BlockDriverState *bs;
+>
+>
+>
+>     bs = bdrv_find_node(node_name);
+>
+>     if (!bs) {
+>
+>         error_setg(errp, "node not found");
+>
+>         return;
+>
+>     }
+>
+>
+>
+>     bdrv_graph_wrlock();
+>
+>     bdrv_drained_begin(bs);
+>
+>     bdrv_drained_end(bs);
+>
+>     bdrv_graph_wrunlock();
+>
+> }
+>
+>
+It seems like either it would be necessary to require:
+>
+1. not draining inside an exclusively locked section
+>
+or
+>
+2. making sure that variables used by drained_poll routines are only set
+>
+while holding the reader lock
+>
+?
+>
+>
+Those seem to require rather involved changes, so a third option might
+>
+be to make draining inside an exclusively locked section possible, by
+>
+embedding such locked sections in a drained section:
+>
+>
+> diff --git a/blockjob.c b/blockjob.c
+>
+> index 32007f31a9..9b2f3b3ea9 100644
+>
+> --- a/blockjob.c
+>
+> +++ b/blockjob.c
+>
+> @@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+>       * one to make sure that such a concurrent access does not attempt
+>
+>       * to process an already freed BdrvChild.
+>
+>       */
+>
+> +    bdrv_drain_all_begin();
+>
+>      bdrv_graph_wrlock();
+>
+>      while (job->nodes) {
+>
+>          GSList *l = job->nodes;
+>
+> @@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+>          g_slist_free_1(l);
+>
+>      }
+>
+>      bdrv_graph_wrunlock();
+>
+> +    bdrv_drain_all_end();
+>
+>  }
+>
+>
+>
+>  bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
+>
+>
+This seems to fix the issue at hand. I can send a patch if this is
+>
+considered an acceptable approach.
+>
+>
+Best Regards,
+>
+Fiona
+>
+Hello Fiona,
+
+Thanks for looking into it.  I've tried your 3rd option above and can
+confirm it does fix the deadlock, at least I can't reproduce it.  Other
+iotests also don't seem to be breaking.  So I personally am fine with
+that patch.  Would be nice to hear a word from the maintainers though on
+whether there're any caveats with such approach.
+
+Andrey
+
+On Wed, Apr 30, 2025 at 10:11 AM Andrey Drobyshev
+<andrey.drobyshev@virtuozzo.com> wrote:
+>
+>
+On 4/30/25 11:47 AM, Fiona Ebner wrote:
+>
+> Am 24.04.25 um 19:32 schrieb Andrey Drobyshev:
+>
+>> So it looks like main thread is processing job-dismiss request and is
+>
+>> holding write lock taken in block_job_remove_all_bdrv() (frame #20
+>
+>> above).  At the same time iothread spawns a coroutine which performs IO
+>
+>> request.  Before the coroutine is spawned, blk_aio_prwv() increases
+>
+>> 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+>
+>> trying to acquire the read lock.  But main thread isn't releasing the
+>
+>> lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+>
+>> Here's the deadlock.
+>
+>
+>
+> And for the IO test you provided, it's client->nb_requests that behaves
+>
+> similarly to blk->in_flight here.
+>
+>
+>
+> The issue also reproduces easily when issuing the following QMP command
+>
+> in a loop while doing IO on a device:
+>
+>
+>
+>> void qmp_block_locked_drain(const char *node_name, Error **errp)
+>
+>> {
+>
+>>     BlockDriverState *bs;
+>
+>>
+>
+>>     bs = bdrv_find_node(node_name);
+>
+>>     if (!bs) {
+>
+>>         error_setg(errp, "node not found");
+>
+>>         return;
+>
+>>     }
+>
+>>
+>
+>>     bdrv_graph_wrlock();
+>
+>>     bdrv_drained_begin(bs);
+>
+>>     bdrv_drained_end(bs);
+>
+>>     bdrv_graph_wrunlock();
+>
+>> }
+>
+>
+>
+> It seems like either it would be necessary to require:
+>
+> 1. not draining inside an exclusively locked section
+>
+> or
+>
+> 2. making sure that variables used by drained_poll routines are only set
+>
+> while holding the reader lock
+>
+> ?
+>
+>
+>
+> Those seem to require rather involved changes, so a third option might
+>
+> be to make draining inside an exclusively locked section possible, by
+>
+> embedding such locked sections in a drained section:
+>
+>
+>
+>> diff --git a/blockjob.c b/blockjob.c
+>
+>> index 32007f31a9..9b2f3b3ea9 100644
+>
+>> --- a/blockjob.c
+>
+>> +++ b/blockjob.c
+>
+>> @@ -198,6 +198,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+>>       * one to make sure that such a concurrent access does not attempt
+>
+>>       * to process an already freed BdrvChild.
+>
+>>       */
+>
+>> +    bdrv_drain_all_begin();
+>
+>>      bdrv_graph_wrlock();
+>
+>>      while (job->nodes) {
+>
+>>          GSList *l = job->nodes;
+>
+>> @@ -211,6 +212,7 @@ void block_job_remove_all_bdrv(BlockJob *job)
+>
+>>          g_slist_free_1(l);
+>
+>>      }
+>
+>>      bdrv_graph_wrunlock();
+>
+>> +    bdrv_drain_all_end();
+>
+>>  }
+>
+>>
+>
+>>  bool block_job_has_bdrv(BlockJob *job, BlockDriverState *bs)
+>
+>
+>
+> This seems to fix the issue at hand. I can send a patch if this is
+>
+> considered an acceptable approach.
+Kevin is aware of this thread but it's a public holiday tomorrow so it
+may be a little longer.
+
+Stefan
+
+Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
+>
+Hi all,
+>
+>
+There's a bug in block layer which leads to block graph deadlock.
+>
+Notably, it takes place when blockdev IO is processed within a separate
+>
+iothread.
+>
+>
+This was initially caught by our tests, and I was able to reduce it to a
+>
+relatively simple reproducer.  Such deadlocks are probably supposed to
+>
+be covered in iotests/graph-changes-while-io, but this deadlock isn't.
+>
+>
+Basically what the reproducer does is launches QEMU with a drive having
+>
+'iothread' option set, creates a chain of 2 snapshots, launches
+>
+block-commit job for a snapshot and then dismisses the job, starting
+>
+from the lower snapshot.  If the guest is issuing IO at the same time,
+>
+there's a race in acquiring block graph lock and a potential deadlock.
+>
+>
+Here's how it can be reproduced:
+>
+>
+1. Run QEMU:
+>
+> SRCDIR=/path/to/srcdir
+>
+>
+>
+>
+>
+>
+>
+>
+>
+> $SRCDIR/build/qemu-system-x86_64 -enable-kvm \
+>
+>
+>
+>   -machine q35 -cpu Nehalem \
+>
+>
+>
+>   -name guest=alma8-vm,debug-threads=on \
+>
+>
+>
+>   -m 2g -smp 2 \
+>
+>
+>
+>   -nographic -nodefaults \
+>
+>
+>
+>   -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
+>
+>
+>
+>   -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
+>
+>
+>
+>   -object iothread,id=iothread0 \
+>
+>
+>
+>   -blockdev
+>
+> node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
+>
+>  \
+>
+>   -device virtio-blk-pci,drive=disk,iothread=iothread0
+>
+>
+2. Launch IO (random reads) from within the guest:
+>
+> nc -U /var/run/alma8-serial.sock
+>
+> ...
+>
+> [root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k
+>
+> --size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting
+>
+> --rw=randread --iodepth=1 --filename=/testfile
+>
+>
+3. Run snapshots creation & removal of lower snapshot operation in a
+>
+loop (script attached):
+>
+> while /bin/true ; do ./remove_lower_snap.sh ; done
+>
+>
+And then it occasionally hangs.
+>
+>
+Note: I've tried bisecting this, and looks like deadlock occurs starting
+>
+from the following commit:
+>
+>
+(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
+>
+(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
+>
+>
+On the latest v10.0.0 it does hang as well.
+>
+>
+>
+Here's backtrace of the main thread:
+>
+>
+> #0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
+>
+> timeout=<optimized out>, sigmask=0x0) at
+>
+> ../sysdeps/unix/sysv/linux/ppoll.c:43
+>
+> #1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
+>
+> timeout=-1) at ../util/qemu-timer.c:329
+>
+> #2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
+>
+> ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
+>
+> #3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at
+>
+> ../util/aio-posix.c:730
+>
+> #4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
+>
+> parent=0x0, poll=true) at ../block/io.c:378
+>
+> #5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
+>
+> ../block/io.c:391
+>
+> #6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7682
+>
+> #7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7608
+>
+> #8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7668
+>
+> #9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7608
+>
+> #10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7668
+>
+> #11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7608
+>
+> #12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../blockjob.c:157
+>
+> #13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7592
+>
+> #14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7661
+>
+> #15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
+>
+>     (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 =
+>
+> {...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
+>
+> #16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7592
+>
+> #17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+> ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160,
+>
+> errp=0x0)
+>
+>     at ../block.c:7661
+>
+> #18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0,
+>
+> ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
+>
+> #19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at
+>
+> ../block.c:3317
+>
+> #20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at
+>
+> ../blockjob.c:209
+>
+> #21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
+>
+> ../blockjob.c:82
+>
+> #22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
+>
+> ../job.c:474
+>
+> #23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
+>
+> ../job.c:771
+>
+> #24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
+>
+> errp=0x7ffd94b4f488) at ../job.c:783
+>
+> --Type <RET> for more, q to quit, c to continue without paging--
+>
+> #25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0
+>
+> "commit-snap1", errp=0x7ffd94b4f488) at ../job-qmp.c:138
+>
+> #26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
+>
+> ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
+>
+> #27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
+>
+> ../qapi/qmp-dispatch.c:128
+>
+> #28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
+>
+> ../util/async.c:172
+>
+> #29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
+>
+> ../util/async.c:219
+>
+> #30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
+>
+> ../util/aio-posix.c:436
+>
+> #31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
+>
+> callback=0x0, user_data=0x0) at ../util/async.c:361
+>
+> #32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
+>
+> ../glib/gmain.c:3364
+>
+> #33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
+>
+> #34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
+>
+> #35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
+>
+> ../util/main-loop.c:310
+>
+> #36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
+>
+> ../util/main-loop.c:589
+>
+> #37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
+>
+> #38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
+>
+> ../system/main.c:50
+>
+> #39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
+>
+> ../system/main.c:80
+>
+>
+>
+And here's coroutine trying to acquire read lock:
+>
+>
+> (gdb) qemu coroutine reader_queue->entries.sqh_first
+>
+> #0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
+>
+> to_=0x7fc537fff508, action=COROUTINE_YIELD) at
+>
+> ../util/coroutine-ucontext.c:321
+>
+> #1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
+>
+> ../util/qemu-coroutine.c:339
+>
+> #2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
+>
+> <reader_queue>, lock=0x7fc53c57de50, flags=0) at
+>
+> ../util/qemu-coroutine-lock.c:60
+>
+> #3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at
+>
+> ../block/graph-lock.c:231
+>
+> #4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at
+>
+> /home/root/src/qemu/master/include/block/graph-lock.h:213
+>
+> #5  0x0000557eb460fa41 in blk_co_do_preadv_part
+>
+>     (blk=0x557eb84c0810, offset=6890553344, bytes=4096,
+>
+> qiov=0x7fc530006988, qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at
+>
+> ../block/block-backend.c:1339
+>
+> #6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
+>
+> ../block/block-backend.c:1619
+>
+> #7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886)
+>
+> at ../util/coroutine-ucontext.c:175
+>
+> #8  0x00007fc547c2a360 in __start_context () at
+>
+> ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
+>
+> #9  0x00007ffd94b4ea40 in  ()
+>
+> #10 0x0000000000000000 in  ()
+>
+>
+>
+So it looks like main thread is processing job-dismiss request and is
+>
+holding write lock taken in block_job_remove_all_bdrv() (frame #20
+>
+above).  At the same time iothread spawns a coroutine which performs IO
+>
+request.  Before the coroutine is spawned, blk_aio_prwv() increases
+>
+'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+>
+trying to acquire the read lock.  But main thread isn't releasing the
+>
+lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+>
+Here's the deadlock.
+>
+>
+Any comments and suggestions on the subject are welcomed.  Thanks!
+I think this is what the blk_wait_while_drained() call was supposed to
+address in blk_co_do_preadv_part(). However, with the use of multiple
+I/O threads, this is racy.
+
+Do you think that in your case we hit the small race window between the
+checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
+another reason why blk_wait_while_drained() didn't do its job?
+
+Kevin
+
+On 5/2/25 19:34, Kevin Wolf wrote:
+Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
+Hi all,
+
+There's a bug in block layer which leads to block graph deadlock.
+Notably, it takes place when blockdev IO is processed within a separate
+iothread.
+
+This was initially caught by our tests, and I was able to reduce it to a
+relatively simple reproducer.  Such deadlocks are probably supposed to
+be covered in iotests/graph-changes-while-io, but this deadlock isn't.
+
+Basically what the reproducer does is launches QEMU with a drive having
+'iothread' option set, creates a chain of 2 snapshots, launches
+block-commit job for a snapshot and then dismisses the job, starting
+from the lower snapshot.  If the guest is issuing IO at the same time,
+there's a race in acquiring block graph lock and a potential deadlock.
+
+Here's how it can be reproduced:
+
+1. Run QEMU:
+SRCDIR=/path/to/srcdir
+$SRCDIR/build/qemu-system-x86_64 -enable-kvm \
+-machine q35 -cpu Nehalem \
+   -name guest=alma8-vm,debug-threads=on \
+   -m 2g -smp 2 \
+   -nographic -nodefaults \
+   -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
+   -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
+   -object iothread,id=iothread0 \
+   -blockdev 
+node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
+ \
+   -device virtio-blk-pci,drive=disk,iothread=iothread0
+2. Launch IO (random reads) from within the guest:
+nc -U /var/run/alma8-serial.sock
+...
+[root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1 --bs=4k 
+--size=1G --numjobs=1 --time_based=1 --runtime=300 --group_reporting 
+--rw=randread --iodepth=1 --filename=/testfile
+3. Run snapshots creation & removal of lower snapshot operation in a
+loop (script attached):
+while /bin/true ; do ./remove_lower_snap.sh ; done
+And then it occasionally hangs.
+
+Note: I've tried bisecting this, and looks like deadlock occurs starting
+from the following commit:
+
+(BAD)  5bdbaebcce virtio: Re-enable notifications after drain
+(GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
+
+On the latest v10.0.0 it does hang as well.
+
+
+Here's backtrace of the main thread:
+#0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1, timeout=<optimized 
+out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:43
+#1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1, timeout=-1) 
+at ../util/qemu-timer.c:329
+#2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20, 
+ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
+#3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true) at 
+../util/aio-posix.c:730
+#4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950, parent=0x0, 
+poll=true) at ../block/io.c:378
+#5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at 
+../block/io.c:391
+#6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7682
+#7  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7964250, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7608
+#8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7668
+#9  0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb7e59110, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7608
+#10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7668
+#11 0x0000557eb45ebf2b in bdrv_child_change_aio_context (c=0x557eb814ed80, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7608
+#12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../blockjob.c:157
+#13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb7c9d3f0, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7592
+#14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7661
+#15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
+     (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, 
+tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
+#16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context (c=0x557eb8565af0, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7592
+#17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0, 
+ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...}, tran=0x557eb7a87160, 
+errp=0x0)
+     at ../block.c:7661
+#18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context (bs=0x557eb79575e0, 
+ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at ../block.c:7715
+#19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30) at 
+../block.c:3317
+#20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv (job=0x557eb7952800) at 
+../blockjob.c:209
+#21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at 
+../blockjob.c:82
+#22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at ../job.c:474
+#23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at 
+../job.c:771
+#24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400, 
+errp=0x7ffd94b4f488) at ../job.c:783
+--Type <RET> for more, q to quit, c to continue without paging--
+#25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0 "commit-snap1", 
+errp=0x7ffd94b4f488) at ../job-qmp.c:138
+#26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0, 
+ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
+#27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at 
+../qapi/qmp-dispatch.c:128
+#28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at ../util/async.c:172
+#29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at 
+../util/async.c:219
+#30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at 
+../util/aio-posix.c:436
+#31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200, 
+callback=0x0, user_data=0x0) at ../util/async.c:361
+#32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at 
+../glib/gmain.c:3364
+#33 g_main_context_dispatch (context=0x557eb76c6430) at ../glib/gmain.c:4079
+#34 0x0000557eb47d3ab1 in glib_pollfds_poll () at ../util/main-loop.c:287
+#35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at 
+../util/main-loop.c:310
+#36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at 
+../util/main-loop.c:589
+#37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
+#38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at ../system/main.c:50
+#39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at 
+../system/main.c:80
+And here's coroutine trying to acquire read lock:
+(gdb) qemu coroutine reader_queue->entries.sqh_first
+#0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0, 
+to_=0x7fc537fff508, action=COROUTINE_YIELD) at ../util/coroutine-ucontext.c:321
+#1  0x0000557eb47d4d4a in qemu_coroutine_yield () at 
+../util/qemu-coroutine.c:339
+#2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0 
+<reader_queue>, lock=0x7fc53c57de50, flags=0) at 
+../util/qemu-coroutine-lock.c:60
+#3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at ../block/graph-lock.c:231
+#4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3) at 
+/home/root/src/qemu/master/include/block/graph-lock.h:213
+#5  0x0000557eb460fa41 in blk_co_do_preadv_part
+     (blk=0x557eb84c0810, offset=6890553344, bytes=4096, qiov=0x7fc530006988, 
+qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at ../block/block-backend.c:1339
+#6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at 
+../block/block-backend.c:1619
+#7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040, i1=21886) at 
+../util/coroutine-ucontext.c:175
+#8  0x00007fc547c2a360 in __start_context () at 
+../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
+#9  0x00007ffd94b4ea40 in  ()
+#10 0x0000000000000000 in  ()
+So it looks like main thread is processing job-dismiss request and is
+holding write lock taken in block_job_remove_all_bdrv() (frame #20
+above).  At the same time iothread spawns a coroutine which performs IO
+request.  Before the coroutine is spawned, blk_aio_prwv() increases
+'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+trying to acquire the read lock.  But main thread isn't releasing the
+lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+Here's the deadlock.
+
+Any comments and suggestions on the subject are welcomed.  Thanks!
+I think this is what the blk_wait_while_drained() call was supposed to
+address in blk_co_do_preadv_part(). However, with the use of multiple
+I/O threads, this is racy.
+
+Do you think that in your case we hit the small race window between the
+checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
+another reason why blk_wait_while_drained() didn't do its job?
+
+Kevin
+At my opinion there is very big race window. Main thread has
+eaten graph write lock. After that another coroutine is stalled
+within GRAPH_RDLOCK_GUARD() as there is no drain at the moment and only
+after that main thread has started drain. That is why Fiona's idea is
+looking working. Though this would mean that normally we should always
+do that at the moment when we acquire write lock. May be even inside
+this function. Den
+
+Am 02.05.2025 um 19:52 hat Denis V. Lunev geschrieben:
+>
+On 5/2/25 19:34, Kevin Wolf wrote:
+>
+> Am 24.04.2025 um 19:32 hat Andrey Drobyshev geschrieben:
+>
+> > Hi all,
+>
+> >
+>
+> > There's a bug in block layer which leads to block graph deadlock.
+>
+> > Notably, it takes place when blockdev IO is processed within a separate
+>
+> > iothread.
+>
+> >
+>
+> > This was initially caught by our tests, and I was able to reduce it to a
+>
+> > relatively simple reproducer.  Such deadlocks are probably supposed to
+>
+> > be covered in iotests/graph-changes-while-io, but this deadlock isn't.
+>
+> >
+>
+> > Basically what the reproducer does is launches QEMU with a drive having
+>
+> > 'iothread' option set, creates a chain of 2 snapshots, launches
+>
+> > block-commit job for a snapshot and then dismisses the job, starting
+>
+> > from the lower snapshot.  If the guest is issuing IO at the same time,
+>
+> > there's a race in acquiring block graph lock and a potential deadlock.
+>
+> >
+>
+> > Here's how it can be reproduced:
+>
+> >
+>
+> > 1. Run QEMU:
+>
+> > > SRCDIR=/path/to/srcdir
+>
+> > > $SRCDIR/build/qemu-system-x86_64 -enable-kvm \
+>
+> > >    -machine q35 -cpu Nehalem \
+>
+> > >    -name guest=alma8-vm,debug-threads=on \
+>
+> > >    -m 2g -smp 2 \
+>
+> > >    -nographic -nodefaults \
+>
+> > >    -qmp unix:/var/run/alma8-qmp.sock,server=on,wait=off \
+>
+> > >    -serial unix:/var/run/alma8-serial.sock,server=on,wait=off \
+>
+> > >    -object iothread,id=iothread0 \
+>
+> > >    -blockdev
+>
+> > > node-name=disk,driver=qcow2,file.driver=file,file.filename=/path/to/img/alma8.qcow2
+>
+> > >  \
+>
+> > >    -device virtio-blk-pci,drive=disk,iothread=iothread0
+>
+> > 2. Launch IO (random reads) from within the guest:
+>
+> > > nc -U /var/run/alma8-serial.sock
+>
+> > > ...
+>
+> > > [root@alma8-vm ~]# fio --name=randread --ioengine=libaio --direct=1
+>
+> > > --bs=4k --size=1G --numjobs=1 --time_based=1 --runtime=300
+>
+> > > --group_reporting --rw=randread --iodepth=1 --filename=/testfile
+>
+> > 3. Run snapshots creation & removal of lower snapshot operation in a
+>
+> > loop (script attached):
+>
+> > > while /bin/true ; do ./remove_lower_snap.sh ; done
+>
+> > And then it occasionally hangs.
+>
+> >
+>
+> > Note: I've tried bisecting this, and looks like deadlock occurs starting
+>
+> > from the following commit:
+>
+> >
+>
+> > (BAD)  5bdbaebcce virtio: Re-enable notifications after drain
+>
+> > (GOOD) c42c3833e0 virtio-scsi: Attach event vq notifier with no_poll
+>
+> >
+>
+> > On the latest v10.0.0 it does hang as well.
+>
+> >
+>
+> >
+>
+> > Here's backtrace of the main thread:
+>
+> >
+>
+> > > #0  0x00007fc547d427ce in __ppoll (fds=0x557eb79657b0, nfds=1,
+>
+> > > timeout=<optimized out>, sigmask=0x0) at
+>
+> > > ../sysdeps/unix/sysv/linux/ppoll.c:43
+>
+> > > #1  0x0000557eb47d955c in qemu_poll_ns (fds=0x557eb79657b0, nfds=1,
+>
+> > > timeout=-1) at ../util/qemu-timer.c:329
+>
+> > > #2  0x0000557eb47b2204 in fdmon_poll_wait (ctx=0x557eb76c5f20,
+>
+> > > ready_list=0x7ffd94b4edd8, timeout=-1) at ../util/fdmon-poll.c:79
+>
+> > > #3  0x0000557eb47b1c45 in aio_poll (ctx=0x557eb76c5f20, blocking=true)
+>
+> > > at ../util/aio-posix.c:730
+>
+> > > #4  0x0000557eb4621edd in bdrv_do_drained_begin (bs=0x557eb795e950,
+>
+> > > parent=0x0, poll=true) at ../block/io.c:378
+>
+> > > #5  0x0000557eb4621f7b in bdrv_drained_begin (bs=0x557eb795e950) at
+>
+> > > ../block/io.c:391
+>
+> > > #6  0x0000557eb45ec125 in bdrv_change_aio_context (bs=0x557eb795e950,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7682
+>
+> > > #7  0x0000557eb45ebf2b in bdrv_child_change_aio_context
+>
+> > > (c=0x557eb7964250, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7608
+>
+> > > #8  0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7668
+>
+> > > #9  0x0000557eb45ebf2b in bdrv_child_change_aio_context
+>
+> > > (c=0x557eb7e59110, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7608
+>
+> > > #10 0x0000557eb45ec0c4 in bdrv_change_aio_context (bs=0x557eb7e51960,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7668
+>
+> > > #11 0x0000557eb45ebf2b in bdrv_child_change_aio_context
+>
+> > > (c=0x557eb814ed80, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7608
+>
+> > > #12 0x0000557eb45ee8e4 in child_job_change_aio_ctx (c=0x557eb7c9d3f0,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../blockjob.c:157
+>
+> > > #13 0x0000557eb45ebe2d in bdrv_parent_change_aio_context
+>
+> > > (c=0x557eb7c9d3f0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7592
+>
+> > > #14 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb7d74310,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7661
+>
+> > > #15 0x0000557eb45dcd7e in bdrv_child_cb_change_aio_ctx
+>
+> > >      (child=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60
+>
+> > > = {...}, tran=0x557eb7a87160, errp=0x0) at ../block.c:1234
+>
+> > > #16 0x0000557eb45ebe2d in bdrv_parent_change_aio_context
+>
+> > > (c=0x557eb8565af0, ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7592
+>
+> > > #17 0x0000557eb45ec06b in bdrv_change_aio_context (bs=0x557eb79575e0,
+>
+> > > ctx=0x557eb76c5f20, visited=0x557eb7e06b60 = {...},
+>
+> > > tran=0x557eb7a87160, errp=0x0)
+>
+> > >      at ../block.c:7661
+>
+> > > #18 0x0000557eb45ec1f3 in bdrv_try_change_aio_context
+>
+> > > (bs=0x557eb79575e0, ctx=0x557eb76c5f20, ignore_child=0x0, errp=0x0) at
+>
+> > > ../block.c:7715
+>
+> > > #19 0x0000557eb45e1b15 in bdrv_root_unref_child (child=0x557eb7966f30)
+>
+> > > at ../block.c:3317
+>
+> > > #20 0x0000557eb45eeaa8 in block_job_remove_all_bdrv
+>
+> > > (job=0x557eb7952800) at ../blockjob.c:209
+>
+> > > #21 0x0000557eb45ee641 in block_job_free (job=0x557eb7952800) at
+>
+> > > ../blockjob.c:82
+>
+> > > #22 0x0000557eb45f17af in job_unref_locked (job=0x557eb7952800) at
+>
+> > > ../job.c:474
+>
+> > > #23 0x0000557eb45f257d in job_do_dismiss_locked (job=0x557eb7952800) at
+>
+> > > ../job.c:771
+>
+> > > #24 0x0000557eb45f25fe in job_dismiss_locked (jobptr=0x7ffd94b4f400,
+>
+> > > errp=0x7ffd94b4f488) at ../job.c:783
+>
+> > > --Type <RET> for more, q to quit, c to continue without paging--
+>
+> > > #25 0x0000557eb45d8e84 in qmp_job_dismiss (id=0x557eb7aa42b0
+>
+> > > "commit-snap1", errp=0x7ffd94b4f488) at ../job-qmp.c:138
+>
+> > > #26 0x0000557eb472f6a3 in qmp_marshal_job_dismiss (args=0x7fc52c00a3b0,
+>
+> > > ret=0x7fc53c880da8, errp=0x7fc53c880da0) at qapi/qapi-commands-job.c:221
+>
+> > > #27 0x0000557eb47a35f3 in do_qmp_dispatch_bh (opaque=0x7fc53c880e40) at
+>
+> > > ../qapi/qmp-dispatch.c:128
+>
+> > > #28 0x0000557eb47d1cd2 in aio_bh_call (bh=0x557eb79568f0) at
+>
+> > > ../util/async.c:172
+>
+> > > #29 0x0000557eb47d1df5 in aio_bh_poll (ctx=0x557eb76c0200) at
+>
+> > > ../util/async.c:219
+>
+> > > #30 0x0000557eb47b12f3 in aio_dispatch (ctx=0x557eb76c0200) at
+>
+> > > ../util/aio-posix.c:436
+>
+> > > #31 0x0000557eb47d2266 in aio_ctx_dispatch (source=0x557eb76c0200,
+>
+> > > callback=0x0, user_data=0x0) at ../util/async.c:361
+>
+> > > #32 0x00007fc549232f4f in g_main_dispatch (context=0x557eb76c6430) at
+>
+> > > ../glib/gmain.c:3364
+>
+> > > #33 g_main_context_dispatch (context=0x557eb76c6430) at
+>
+> > > ../glib/gmain.c:4079
+>
+> > > #34 0x0000557eb47d3ab1 in glib_pollfds_poll () at
+>
+> > > ../util/main-loop.c:287
+>
+> > > #35 0x0000557eb47d3b38 in os_host_main_loop_wait (timeout=0) at
+>
+> > > ../util/main-loop.c:310
+>
+> > > #36 0x0000557eb47d3c58 in main_loop_wait (nonblocking=0) at
+>
+> > > ../util/main-loop.c:589
+>
+> > > #37 0x0000557eb4218b01 in qemu_main_loop () at ../system/runstate.c:835
+>
+> > > #38 0x0000557eb46df166 in qemu_default_main (opaque=0x0) at
+>
+> > > ../system/main.c:50
+>
+> > > #39 0x0000557eb46df215 in main (argc=24, argv=0x7ffd94b4f8d8) at
+>
+> > > ../system/main.c:80
+>
+> >
+>
+> > And here's coroutine trying to acquire read lock:
+>
+> >
+>
+> > > (gdb) qemu coroutine reader_queue->entries.sqh_first
+>
+> > > #0  0x0000557eb47d7068 in qemu_coroutine_switch (from_=0x557eb7aa48b0,
+>
+> > > to_=0x7fc537fff508, action=COROUTINE_YIELD) at
+>
+> > > ../util/coroutine-ucontext.c:321
+>
+> > > #1  0x0000557eb47d4d4a in qemu_coroutine_yield () at
+>
+> > > ../util/qemu-coroutine.c:339
+>
+> > > #2  0x0000557eb47d56c8 in qemu_co_queue_wait_impl (queue=0x557eb59954c0
+>
+> > > <reader_queue>, lock=0x7fc53c57de50, flags=0) at
+>
+> > > ../util/qemu-coroutine-lock.c:60
+>
+> > > #3  0x0000557eb461fea7 in bdrv_graph_co_rdlock () at
+>
+> > > ../block/graph-lock.c:231
+>
+> > > #4  0x0000557eb460c81a in graph_lockable_auto_lock (x=0x7fc53c57dee3)
+>
+> > > at /home/root/src/qemu/master/include/block/graph-lock.h:213
+>
+> > > #5  0x0000557eb460fa41 in blk_co_do_preadv_part
+>
+> > >      (blk=0x557eb84c0810, offset=6890553344, bytes=4096,
+>
+> > > qiov=0x7fc530006988, qiov_offset=0, flags=BDRV_REQ_REGISTERED_BUF) at
+>
+> > > ../block/block-backend.c:1339
+>
+> > > #6  0x0000557eb46104d7 in blk_aio_read_entry (opaque=0x7fc530003240) at
+>
+> > > ../block/block-backend.c:1619
+>
+> > > #7  0x0000557eb47d6c40 in coroutine_trampoline (i0=-1213577040,
+>
+> > > i1=21886) at ../util/coroutine-ucontext.c:175
+>
+> > > #8  0x00007fc547c2a360 in __start_context () at
+>
+> > > ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
+>
+> > > #9  0x00007ffd94b4ea40 in  ()
+>
+> > > #10 0x0000000000000000 in  ()
+>
+> >
+>
+> > So it looks like main thread is processing job-dismiss request and is
+>
+> > holding write lock taken in block_job_remove_all_bdrv() (frame #20
+>
+> > above).  At the same time iothread spawns a coroutine which performs IO
+>
+> > request.  Before the coroutine is spawned, blk_aio_prwv() increases
+>
+> > 'in_flight' counter for Blk.  Then blk_co_do_preadv_part() (frame #5) is
+>
+> > trying to acquire the read lock.  But main thread isn't releasing the
+>
+> > lock as blk_root_drained_poll() returns true since blk->in_flight > 0.
+>
+> > Here's the deadlock.
+>
+> >
+>
+> > Any comments and suggestions on the subject are welcomed.  Thanks!
+>
+> I think this is what the blk_wait_while_drained() call was supposed to
+>
+> address in blk_co_do_preadv_part(). However, with the use of multiple
+>
+> I/O threads, this is racy.
+>
+>
+>
+> Do you think that in your case we hit the small race window between the
+>
+> checks in blk_wait_while_drained() and GRAPH_RDLOCK_GUARD()? Or is there
+>
+> another reason why blk_wait_while_drained() didn't do its job?
+>
+>
+>
+At my opinion there is very big race window. Main thread has
+>
+eaten graph write lock. After that another coroutine is stalled
+>
+within GRAPH_RDLOCK_GUARD() as there is no drain at the moment and only
+>
+after that main thread has started drain.
+You're right, I confused taking the write lock with draining there.
+
+>
+That is why Fiona's idea is looking working. Though this would mean
+>
+that normally we should always do that at the moment when we acquire
+>
+write lock. May be even inside this function.
+I actually see now that not all of my graph locking patches were merged.
+At least I did have the thought that bdrv_drained_begin() must be marked
+GRAPH_UNLOCKED because it polls. That means that calling it from inside
+bdrv_try_change_aio_context() is actually forbidden (and that's the part
+I didn't see back then because it doesn't have TSA annotations).
+
+If you refactor the code to move the drain out to before the lock is
+taken, I think you end up with Fiona's patch, except you'll remove the
+forbidden inner drain and add more annotations for some functions and
+clarify the rules around them. I don't know, but I wouldn't be surprised
+if along the process we find other bugs, too.
+
+So Fiona's drain looks right to me, but we should probably approach it
+more systematically.
+
+Kevin
+
diff --git a/results/classifier/zero-shot/010/debug/64571620 b/results/classifier/zero-shot/010/debug/64571620
new file mode 100644
index 00000000..5beb844c
--- /dev/null
+++ b/results/classifier/zero-shot/010/debug/64571620
@@ -0,0 +1,809 @@
+debug: 0.927
+other: 0.922
+semantic: 0.903
+permissions: 0.902
+device: 0.899
+performance: 0.897
+graphic: 0.897
+PID: 0.887
+boot: 0.879
+KVM: 0.867
+files: 0.855
+socket: 0.855
+network: 0.853
+vnc: 0.819
+debug: 0.901
+KVM: 0.636
+files: 0.107
+socket: 0.102
+PID: 0.097
+other: 0.077
+performance: 0.063
+device: 0.051
+network: 0.047
+permissions: 0.024
+boot: 0.021
+vnc: 0.019
+semantic: 0.014
+graphic: 0.001
+
+[BUG] Migration hv_time rollback
+
+Hi,
+
+We are experiencing timestamp rollbacks during live-migration of
+Windows 10 guests with the following qemu configuration (linux 5.4.46
+and qemu master):
+```
+$ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+```
+
+I have tracked the bug to the fact that `kvmclock` is not exposed and
+disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+
+I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+present and add Hyper-V support for the `kvmclock_current_nsec`
+function.
+
+I'm asking for advice because I am unsure this is the _right_ approach
+and how to keep migration compatibility between qemu versions.
+
+Thank you all,
+
+-- 
+Antoine 'xdbob' Damhet
+signature.asc
+Description:
+PGP signature
+
+cc'ing in Vitaly who knows about the hv stuff.
+
+* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+Hi,
+>
+>
+We are experiencing timestamp rollbacks during live-migration of
+>
+Windows 10 guests with the following qemu configuration (linux 5.4.46
+>
+and qemu master):
+>
+```
+>
+$ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+```
+How big a jump are you seeing, and how did you notice it in the guest?
+
+Dave
+
+>
+I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>
+I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+function.
+>
+>
+I'm asking for advice because I am unsure this is the _right_ approach
+>
+and how to keep migration compatibility between qemu versions.
+>
+>
+Thank you all,
+>
+>
+--
+>
+Antoine 'xdbob' Damhet
+-- 
+Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
+
+"Dr. David Alan Gilbert" <dgilbert@redhat.com> writes:
+
+>
+cc'ing in Vitaly who knows about the hv stuff.
+>
+cc'ing Marcelo who knows about clocksources :-)
+
+>
+* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+> Hi,
+>
+>
+>
+> We are experiencing timestamp rollbacks during live-migration of
+>
+> Windows 10 guests
+Are you migrating to the same hardware (with the same TSC frequency)? Is
+TSC used as the clocksource on the host?
+
+>
+>  with the following qemu configuration (linux 5.4.46
+>
+> and qemu master):
+>
+> ```
+>
+> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+> ```
+Out of pure curiosity, what's the purpose of doing 'kvm=off'? Windows is
+not going to check for KVM identification anyway so we pretend we're
+Hyper-V. 
+
+Also, have you tried adding more Hyper-V enlightenments? 
+
+>
+>
+How big a jump are you seeing, and how did you notice it in the guest?
+>
+>
+Dave
+>
+>
+> I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>
+>
+> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+> present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+> function.
+AFAICT kvmclock_current_nsec() checks whether kvmclock was enabled by
+the guest:
+
+   if (!(env->system_time_msr & 1ULL)) {
+        /* KVM clock not active */
+        return 0;
+    }
+
+and this is (and way) always false for Windows guests.
+
+>
+>
+>
+> I'm asking for advice because I am unsure this is the _right_ approach
+>
+> and how to keep migration compatibility between qemu versions.
+>
+>
+>
+> Thank you all,
+>
+>
+>
+> --
+>
+> Antoine 'xdbob' Damhet
+-- 
+Vitaly
+
+On Wed, Sep 16, 2020 at 01:59:43PM +0200, Vitaly Kuznetsov wrote:
+>
+"Dr. David Alan Gilbert" <dgilbert@redhat.com> writes:
+>
+>
+> cc'ing in Vitaly who knows about the hv stuff.
+>
+>
+>
+>
+cc'ing Marcelo who knows about clocksources :-)
+>
+>
+> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+>> Hi,
+>
+>>
+>
+>> We are experiencing timestamp rollbacks during live-migration of
+>
+>> Windows 10 guests
+>
+>
+Are you migrating to the same hardware (with the same TSC frequency)? Is
+>
+TSC used as the clocksource on the host?
+Yes we are migrating to the exact same hardware. And yes TSC is used as
+a clocksource in the host (but the bug is still happening with `hpet` as
+a clocksource).
+
+>
+>
+>>  with the following qemu configuration (linux 5.4.46
+>
+>> and qemu master):
+>
+>> ```
+>
+>> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+>> ```
+>
+>
+Out of pure curiosity, what's the purpose of doing 'kvm=off'? Windows is
+>
+not going to check for KVM identification anyway so we pretend we're
+>
+Hyper-V.
+Some softwares explicitly checks for the presence of KVM and then crash
+if they find it in CPUID :/
+
+>
+>
+Also, have you tried adding more Hyper-V enlightenments?
+Yes, I published a stripped-down command-line for a minimal reproducer
+but even `hv-frequencies` and `hv-reenlightenment` don't help.
+
+>
+>
+>
+>
+> How big a jump are you seeing, and how did you notice it in the guest?
+>
+>
+>
+> Dave
+>
+>
+>
+>> I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+>> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>>
+>
+>> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+>> present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+>> function.
+>
+>
+AFAICT kvmclock_current_nsec() checks whether kvmclock was enabled by
+>
+the guest:
+>
+>
+if (!(env->system_time_msr & 1ULL)) {
+>
+/* KVM clock not active */
+>
+return 0;
+>
+}
+>
+>
+and this is (and way) always false for Windows guests.
+Hooo, I missed this piece. When is `clock_is_reliable` expected to be
+false ? Because if it is I still think we should be able to query at
+least `HV_X64_MSR_REFERENCE_TSC`
+
+>
+>
+>>
+>
+>> I'm asking for advice because I am unsure this is the _right_ approach
+>
+>> and how to keep migration compatibility between qemu versions.
+>
+>>
+>
+>> Thank you all,
+>
+>>
+>
+>> --
+>
+>> Antoine 'xdbob' Damhet
+>
+>
+--
+>
+Vitaly
+>
+-- 
+Antoine 'xdbob' Damhet
+signature.asc
+Description:
+PGP signature
+
+On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
+>
+cc'ing in Vitaly who knows about the hv stuff.
+Thanks
+
+>
+>
+* Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+> Hi,
+>
+>
+>
+> We are experiencing timestamp rollbacks during live-migration of
+>
+> Windows 10 guests with the following qemu configuration (linux 5.4.46
+>
+> and qemu master):
+>
+> ```
+>
+> $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+> ```
+>
+>
+How big a jump are you seeing, and how did you notice it in the guest?
+I'm seeing jumps of about the guest uptime (indicating a reset of the
+counter). It's expected because we won't call `KVM_SET_CLOCK` to
+restore any value.
+
+We first noticed it because after some migrations `dwm.exe` crashes with
+the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
+the past." error code.
+
+I can also confirm the following hack makes the behavior disappear:
+
+```
+diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
+index 64283358f9..f334bdf35f 100644
+--- a/hw/i386/kvm/clock.c
++++ b/hw/i386/kvm/clock.c
+@@ -332,11 +332,7 @@ void kvmclock_create(void)
+ {
+     X86CPU *cpu = X86_CPU(first_cpu);
+
+-    if (kvm_enabled() &&
+-        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+-                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
+-        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+-    }
++    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+ }
+
+ static void kvmclock_register_types(void)
+diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
+index 32b1453e6a..11d980ba85 100644
+--- a/hw/i386/pc_piix.c
++++ b/hw/i386/pc_piix.c
+@@ -158,9 +158,7 @@ static void pc_init1(MachineState *machine,
+
+     x86_cpus_init(x86ms, pcmc->default_cpu_version);
+
+-    if (kvm_enabled() && pcmc->kvmclock_enabled) {
+-        kvmclock_create();
+-    }
++    kvmclock_create();
+
+     if (pcmc->pci_enabled) {
+         pci_memory = g_new(MemoryRegion, 1);
+```
+
+>
+>
+Dave
+>
+>
+> I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>
+>
+> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+> present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+> function.
+>
+>
+>
+> I'm asking for advice because I am unsure this is the _right_ approach
+>
+> and how to keep migration compatibility between qemu versions.
+>
+>
+>
+> Thank you all,
+>
+>
+>
+> --
+>
+> Antoine 'xdbob' Damhet
+>
+>
+>
+--
+>
+Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
+>
+-- 
+Antoine 'xdbob' Damhet
+signature.asc
+Description:
+PGP signature
+
+Antoine Damhet <antoine.damhet@blade-group.com> writes:
+
+>
+On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
+>
+> cc'ing in Vitaly who knows about the hv stuff.
+>
+>
+Thanks
+>
+>
+>
+>
+> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+> > Hi,
+>
+> >
+>
+> > We are experiencing timestamp rollbacks during live-migration of
+>
+> > Windows 10 guests with the following qemu configuration (linux 5.4.46
+>
+> > and qemu master):
+>
+> > ```
+>
+> > $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+> > ```
+>
+>
+>
+> How big a jump are you seeing, and how did you notice it in the guest?
+>
+>
+I'm seeing jumps of about the guest uptime (indicating a reset of the
+>
+counter). It's expected because we won't call `KVM_SET_CLOCK` to
+>
+restore any value.
+>
+>
+We first noticed it because after some migrations `dwm.exe` crashes with
+>
+the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
+>
+the past." error code.
+>
+>
+I can also confirm the following hack makes the behavior disappear:
+>
+>
+```
+>
+diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
+>
+index 64283358f9..f334bdf35f 100644
+>
+--- a/hw/i386/kvm/clock.c
+>
++++ b/hw/i386/kvm/clock.c
+>
+@@ -332,11 +332,7 @@ void kvmclock_create(void)
+>
+{
+>
+X86CPU *cpu = X86_CPU(first_cpu);
+>
+>
+-    if (kvm_enabled() &&
+>
+-        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+>
+-                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
+>
+-        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+>
+-    }
+>
++    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+>
+}
+>
+Oh, I think I see what's going on. When you add 'kvm=off'
+cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
+kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
+migration.
+
+In case we really want to support 'kvm=off' I think we can add Hyper-V
+features check here along with KVM, this should do the job.
+
+-- 
+Vitaly
+
+Vitaly Kuznetsov <vkuznets@redhat.com> writes:
+
+>
+Antoine Damhet <antoine.damhet@blade-group.com> writes:
+>
+>
+> On Wed, Sep 16, 2020 at 12:29:56PM +0100, Dr. David Alan Gilbert wrote:
+>
+>> cc'ing in Vitaly who knows about the hv stuff.
+>
+>
+>
+> Thanks
+>
+>
+>
+>>
+>
+>> * Antoine Damhet (antoine.damhet@blade-group.com) wrote:
+>
+>> > Hi,
+>
+>> >
+>
+>> > We are experiencing timestamp rollbacks during live-migration of
+>
+>> > Windows 10 guests with the following qemu configuration (linux 5.4.46
+>
+>> > and qemu master):
+>
+>> > ```
+>
+>> > $ qemu-system-x86_64 -enable-kvm -cpu host,kvm=off,hv_time [...]
+>
+>> > ```
+>
+>>
+>
+>> How big a jump are you seeing, and how did you notice it in the guest?
+>
+>
+>
+> I'm seeing jumps of about the guest uptime (indicating a reset of the
+>
+> counter). It's expected because we won't call `KVM_SET_CLOCK` to
+>
+> restore any value.
+>
+>
+>
+> We first noticed it because after some migrations `dwm.exe` crashes with
+>
+> the "(NTSTATUS) 0x8898009b - QueryPerformanceCounter returned a time in
+>
+> the past." error code.
+>
+>
+>
+> I can also confirm the following hack makes the behavior disappear:
+>
+>
+>
+> ```
+>
+> diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
+>
+> index 64283358f9..f334bdf35f 100644
+>
+> --- a/hw/i386/kvm/clock.c
+>
+> +++ b/hw/i386/kvm/clock.c
+>
+> @@ -332,11 +332,7 @@ void kvmclock_create(void)
+>
+>  {
+>
+>      X86CPU *cpu = X86_CPU(first_cpu);
+>
+>
+>
+> -    if (kvm_enabled() &&
+>
+> -        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+>
+> -                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2)))
+>
+> {
+>
+> -        sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+>
+> -    }
+>
+> +    sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+>
+>  }
+>
+>
+>
+>
+>
+Oh, I think I see what's going on. When you add 'kvm=off'
+>
+cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
+>
+kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
+>
+migration.
+>
+>
+In case we really want to support 'kvm=off' I think we can add Hyper-V
+>
+features check here along with KVM, this should do the job.
+Does the untested
+
+diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
+index 64283358f91d..e03b2ca6d8f6 100644
+--- a/hw/i386/kvm/clock.c
++++ b/hw/i386/kvm/clock.c
+@@ -333,8 +333,9 @@ void kvmclock_create(void)
+     X86CPU *cpu = X86_CPU(first_cpu);
+ 
+     if (kvm_enabled() &&
+-        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+-                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
++        ((cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
++                                         (1ULL << KVM_FEATURE_CLOCKSOURCE2))) 
+||
++         (cpu->env.features[FEAT_HYPERV_EAX] & HV_TIME_REF_COUNT_AVAILABLE))) {
+         sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+     }
+ }
+
+help?
+
+(I don't think we need to remove all 'if (kvm_enabled())' checks from
+machine types as 'kvm=off' should not be related).
+
+-- 
+Vitaly
+
+On Wed, Sep 16, 2020 at 02:50:56PM +0200, Vitaly Kuznetsov wrote:
+[...]
+
+>
+>>
+>
+>
+>
+>
+>
+> Oh, I think I see what's going on. When you add 'kvm=off'
+>
+> cpu->env.features[FEAT_KVM] is reset (see x86_cpu_expand_features()) so
+>
+> kvmclock QEMU device is not created and nobody calls KVM_SET_CLOCK on
+>
+> migration.
+>
+>
+>
+> In case we really want to support 'kvm=off' I think we can add Hyper-V
+>
+> features check here along with KVM, this should do the job.
+>
+>
+Does the untested
+>
+>
+diff --git a/hw/i386/kvm/clock.c b/hw/i386/kvm/clock.c
+>
+index 64283358f91d..e03b2ca6d8f6 100644
+>
+--- a/hw/i386/kvm/clock.c
+>
++++ b/hw/i386/kvm/clock.c
+>
+@@ -333,8 +333,9 @@ void kvmclock_create(void)
+>
+X86CPU *cpu = X86_CPU(first_cpu);
+>
+>
+if (kvm_enabled() &&
+>
+-        cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+>
+-                                       (1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
+>
++        ((cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
+>
++                                         (1ULL <<
+>
+KVM_FEATURE_CLOCKSOURCE2))) ||
+>
++         (cpu->env.features[FEAT_HYPERV_EAX] &
+>
+HV_TIME_REF_COUNT_AVAILABLE))) {
+>
+sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
+>
+}
+>
+}
+>
+>
+help?
+It appears to work :)
+
+>
+>
+(I don't think we need to remove all 'if (kvm_enabled())' checks from
+>
+machine types as 'kvm=off' should not be related).
+Indeed (I didn't look at the macro, it was just quick & dirty).
+
+>
+>
+--
+>
+Vitaly
+>
+>
+-- 
+Antoine 'xdbob' Damhet
+signature.asc
+Description:
+PGP signature
+
+On 16/09/20 13:29, Dr. David Alan Gilbert wrote:
+>
+> I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>
+>
+> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+> present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+> function.
+Yes, this seems correct.  I would have to check but it may even be
+better to _always_ send kvmclock data in the live migration stream.
+
+Paolo
+
+Paolo Bonzini <pbonzini@redhat.com> writes:
+
+>
+On 16/09/20 13:29, Dr. David Alan Gilbert wrote:
+>
+>> I have tracked the bug to the fact that `kvmclock` is not exposed and
+>
+>> disabled from qemu PoV but is in fact used by `hv-time` (in KVM).
+>
+>>
+>
+>> I think we should enable the `kvmclock` (qemu device) if `hv-time` is
+>
+>> present and add Hyper-V support for the `kvmclock_current_nsec`
+>
+>> function.
+>
+>
+Yes, this seems correct.  I would have to check but it may even be
+>
+better to _always_ send kvmclock data in the live migration stream.
+>
+The question I have is: with 'kvm=off', do we actually restore TSC
+reading on migration? (and I guess the answer is 'no' or Hyper-V TSC
+page would 'just work' I guess). So yea, maybe dropping the
+'cpu->env.features[FEAT_KVM]' check is the right fix.
+
+-- 
+Vitaly
+
diff --git a/results/classifier/zero-shot/010/network/62179944 b/results/classifier/zero-shot/010/network/62179944
new file mode 100644
index 00000000..a00799fe
--- /dev/null
+++ b/results/classifier/zero-shot/010/network/62179944
@@ -0,0 +1,55 @@
+network: 0.966
+graphic: 0.907
+device: 0.818
+performance: 0.636
+socket: 0.608
+boot: 0.567
+files: 0.565
+other: 0.519
+PID: 0.504
+vnc: 0.498
+semantic: 0.454
+permissions: 0.403
+debug: 0.400
+KVM: 0.153
+network: 0.996
+debug: 0.934
+files: 0.023
+socket: 0.014
+device: 0.011
+PID: 0.010
+other: 0.008
+semantic: 0.008
+KVM: 0.003
+performance: 0.003
+vnc: 0.002
+boot: 0.002
+graphic: 0.001
+permissions: 0.001
+
+[Qemu-devel] [BUG] network : windows os lost ip address of the network card  in some cases
+
+we  found this problem for a long time 。For example, if we has three network 
+card in virtual xml file ，such as "network connection 1" / "network connection 
+2"/"network connection 3" 。
+
+Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
+delete the first card ，reboot the windows virtual os, then this problem 
+happened !
+
+
+
+
+we found that the sencond network card will  replace the first one , then the 
+ip address of "network connection 2 " become 192.168.1.1 。
+
+
+Our third party users began to complain about this bug 。All the business of the 
+second ip  lost !!! 
+
+I mean both of windows and linux has this bug ,  we solve this bug in linux  
+throught bonding netcrad pci and mac address 。
+
+There is no good solution on windows os . thera are ?  we implemented a plan to 
+resumption of IP by QGA.  Is there a better way ?
+
diff --git a/results/classifier/zero-shot/010/none/42613410 b/results/classifier/zero-shot/010/none/42613410
new file mode 100644
index 00000000..e51d5c84
--- /dev/null
+++ b/results/classifier/zero-shot/010/none/42613410
@@ -0,0 +1,173 @@
+vnc: 0.400
+KVM: 0.381
+permissions: 0.373
+device: 0.342
+other: 0.332
+graphic: 0.330
+semantic: 0.327
+performance: 0.324
+debug: 0.311
+network: 0.284
+PID: 0.276
+files: 0.264
+socket: 0.190
+boot: 0.187
+network: 0.116
+files: 0.031
+socket: 0.029
+other: 0.026
+PID: 0.020
+device: 0.017
+boot: 0.013
+vnc: 0.013
+semantic: 0.012
+debug: 0.010
+KVM: 0.006
+performance: 0.004
+permissions: 0.002
+graphic: 0.002
+
+[Qemu-devel] [PATCH, Bug 1612908] scripts: Add TCP endpoints for qom-* scripts
+
+From: Carl Allendorph <address@hidden>
+
+I've created a patch for bug #1612908. The current docs for the scripts
+in the "scripts/qmp/" directory suggest that both unix sockets and
+tcp endpoints can be used. The TCP endpoints don't work for most of the
+scripts, with notable exception of 'qmp-shell'. This patch attempts to
+refactor the process of distinguishing between unix path endpoints and
+tcp endpoints to work for all of these scripts.
+
+Carl Allendorph (1):
+  scripts: Add ability for qom-* python scripts to target tcp endpoints
+
+ scripts/qmp/qmp-shell | 22 ++--------------------
+ scripts/qmp/qmp.py    | 23 ++++++++++++++++++++---
+ 2 files changed, 22 insertions(+), 23 deletions(-)
+
+--
+2.7.4
+
+From: Carl Allendorph <address@hidden>
+
+The current code for QEMUMonitorProtocol accepts both a unix socket
+endpoint as a string and a tcp endpoint as a tuple. Most of the scripts
+that use this class don't massage the command line argument to generate
+a tuple. This patch refactors qmp-shell slightly to reuse the existing
+parsing of the "host:port" string for all the qom-* scripts.
+
+Signed-off-by: Carl Allendorph <address@hidden>
+---
+ scripts/qmp/qmp-shell | 22 ++--------------------
+ scripts/qmp/qmp.py    | 23 ++++++++++++++++++++---
+ 2 files changed, 22 insertions(+), 23 deletions(-)
+
+diff --git a/scripts/qmp/qmp-shell b/scripts/qmp/qmp-shell
+index 0373b24..8a2a437 100755
+--- a/scripts/qmp/qmp-shell
++++ b/scripts/qmp/qmp-shell
+@@ -83,9 +83,6 @@ class QMPCompleter(list):
+ class QMPShellError(Exception):
+     pass
+ 
+-class QMPShellBadPort(QMPShellError):
+-    pass
+-
+ class FuzzyJSON(ast.NodeTransformer):
+     '''This extension of ast.NodeTransformer filters literal "true/false/null"
+     values in an AST and replaces them by proper "True/False/None" values that
+@@ -103,28 +100,13 @@ class FuzzyJSON(ast.NodeTransformer):
+ #       _execute_cmd()). Let's design a better one.
+ class QMPShell(qmp.QEMUMonitorProtocol):
+     def __init__(self, address, pretty=False):
+-        qmp.QEMUMonitorProtocol.__init__(self, self.__get_address(address))
++        qmp.QEMUMonitorProtocol.__init__(self, address)
+         self._greeting = None
+         self._completer = None
+         self._pretty = pretty
+         self._transmode = False
+         self._actions = list()
+ 
+-    def __get_address(self, arg):
+-        """
+-        Figure out if the argument is in the port:host form, if it's not it's
+-        probably a file path.
+-        """
+-        addr = arg.split(':')
+-        if len(addr) == 2:
+-            try:
+-                port = int(addr[1])
+-            except ValueError:
+-                raise QMPShellBadPort
+-            return ( addr[0], port )
+-        # socket path
+-        return arg
+-
+     def _fill_completion(self):
+         for cmd in self.cmd('query-commands')['return']:
+             self._completer.append(cmd['name'])
+@@ -400,7 +382,7 @@ def main():
+ 
+         if qemu is None:
+             fail_cmdline()
+-    except QMPShellBadPort:
++    except qmp.QMPShellBadPort:
+         die('bad port number in command-line')
+ 
+     try:
+diff --git a/scripts/qmp/qmp.py b/scripts/qmp/qmp.py
+index 62d3651..261ece8 100644
+--- a/scripts/qmp/qmp.py
++++ b/scripts/qmp/qmp.py
+@@ -25,21 +25,23 @@ class QMPCapabilitiesError(QMPError):
+ class QMPTimeoutError(QMPError):
+     pass
+ 
++class QMPShellBadPort(QMPError):
++    pass
++
+ class QEMUMonitorProtocol:
+     def __init__(self, address, server=False, debug=False):
+         """
+         Create a QEMUMonitorProtocol class.
+ 
+         @param address: QEMU address, can be either a unix socket path (string)
+-                        or a tuple in the form ( address, port ) for a TCP
+-                        connection
++                        or a TCP endpoint (string in the format "host:port")
+         @param server: server mode listens on the socket (bool)
+         @raise socket.error on socket connection errors
+         @note No connection is established, this is done by the connect() or
+               accept() methods
+         """
+         self.__events = []
+-        self.__address = address
++        self.__address = self.__get_address(address)
+         self._debug = debug
+         self.__sock = self.__get_sock()
+         if server:
+@@ -47,6 +49,21 @@ class QEMUMonitorProtocol:
+             self.__sock.bind(self.__address)
+             self.__sock.listen(1)
+ 
++    def __get_address(self, arg):
++        """
++        Figure out if the argument is in the port:host form, if it's not it's
++        probably a file path.
++        """
++        addr = arg.split(':')
++        if len(addr) == 2:
++            try:
++                port = int(addr[1])
++            except ValueError:
++                raise QMPShellBadPort
++            return ( addr[0], port )
++        # socket path
++        return arg
++
+     def __get_sock(self):
+         if isinstance(self.__address, tuple):
+             family = socket.AF_INET
+-- 
+2.7.4
+
diff --git a/results/classifier/zero-shot/010/review/02364653 b/results/classifier/zero-shot/010/review/02364653
new file mode 100644
index 00000000..c96f4883
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/02364653
@@ -0,0 +1,387 @@
+other: 0.956
+graphic: 0.948
+permissions: 0.944
+semantic: 0.942
+debug: 0.940
+PID: 0.938
+performance: 0.934
+device: 0.928
+boot: 0.925
+socket: 0.924
+vnc: 0.922
+KVM: 0.911
+files: 0.908
+network: 0.881
+debug: 0.253
+semantic: 0.157
+files: 0.120
+PID: 0.076
+other: 0.075
+vnc: 0.030
+boot: 0.025
+device: 0.015
+performance: 0.008
+network: 0.005
+socket: 0.005
+permissions: 0.003
+graphic: 0.002
+KVM: 0.001
+
+[Qemu-devel] [BUG] Inappropriate size of target_sigset_t
+
+Hello, Peter, Laurent,
+
+While working on another problem yesterday, I think I discovered a 
+long-standing bug in QEMU Linux user mode: our target_sigset_t structure is 
+eight times smaller as it should be!
+
+In this code segment from syscalls_def.h:
+
+#ifdef TARGET_MIPS
+#define TARGET_NSIG        128
+#else
+#define TARGET_NSIG        64
+#endif
+#define TARGET_NSIG_BPW    TARGET_ABI_BITS
+#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
+
+typedef struct {
+    abi_ulong sig[TARGET_NSIG_WORDS];
+} target_sigset_t;
+
+... TARGET_ABI_BITS should be replaced by eight times smaller constant (in 
+fact, semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is 
+needed is actually "a byte per signal" in target_sigset_t, and we allow "a bit 
+per signal").
+
+All this probably sounds to you like something impossible, since this code is 
+in QEMU "since forever", but I checked everything, and the bug seems real. I 
+wish you can prove me wrong.
+
+I just wanted to let you know about this, given the sensitive timing of current 
+softfreeze, and the fact that I won't be able to do more investigation on this 
+in coming weeks, since I am busy with other tasks, but perhaps you can analyze 
+and do something which you consider appropriate.
+
+Yours,
+Aleksandar
+
+Le 03/07/2019 à 21:46, Aleksandar Markovic a écrit :
+>
+Hello, Peter, Laurent,
+>
+>
+While working on another problem yesterday, I think I discovered a
+>
+long-standing bug in QEMU Linux user mode: our target_sigset_t structure is
+>
+eight times smaller as it should be!
+>
+>
+In this code segment from syscalls_def.h:
+>
+>
+#ifdef TARGET_MIPS
+>
+#define TARGET_NSIG      128
+>
+#else
+>
+#define TARGET_NSIG      64
+>
+#endif
+>
+#define TARGET_NSIG_BPW          TARGET_ABI_BITS
+>
+#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
+>
+>
+typedef struct {
+>
+abi_ulong sig[TARGET_NSIG_WORDS];
+>
+} target_sigset_t;
+>
+>
+... TARGET_ABI_BITS should be replaced by eight times smaller constant (in
+>
+fact, semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is
+>
+needed is actually "a byte per signal" in target_sigset_t, and we allow "a
+>
+bit per signal").
+TARGET_NSIG is divided by TARGET_ABI_BITS which gives you the number of
+abi_ulong words we need in target_sigset_t.
+
+>
+All this probably sounds to you like something impossible, since this code is
+>
+in QEMU "since forever", but I checked everything, and the bug seems real. I
+>
+wish you can prove me wrong.
+>
+>
+I just wanted to let you know about this, given the sensitive timing of
+>
+current softfreeze, and the fact that I won't be able to do more
+>
+investigation on this in coming weeks, since I am busy with other tasks, but
+>
+perhaps you can analyze and do something which you consider appropriate.
+If I compare with kernel, it looks good:
+
+In Linux:
+
+  arch/mips/include/uapi/asm/signal.h
+
+  #define _NSIG           128
+  #define _NSIG_BPW       (sizeof(unsigned long) * 8)
+  #define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+
+  typedef struct {
+          unsigned long sig[_NSIG_WORDS];
+  } sigset_t;
+
+_NSIG_BPW is 8 * 8 = 64 on MIPS64 or 4 * 8 = 32 on MIPS
+
+In QEMU:
+
+TARGET_NSIG_BPW is TARGET_ABI_BITS which is  TARGET_LONG_BITS which is
+64 on MIPS64 and 32 on MIPS.
+
+I think there is no problem.
+
+Thanks,
+Laurent
+
+From: Laurent Vivier <address@hidden>
+>
+If I compare with kernel, it looks good:
+>
+...
+>
+I think there is no problem.
+Sure, thanks for such fast response - again, I am glad if you are right. 
+However, for some reason, glibc (and musl too) define sigset_t differently than 
+kernel. Please take a look. I am not sure if this is covered fine in our code.
+
+Yours,
+Aleksandar
+
+>
+Thanks,
+>
+Laurent
+
+On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
+>
+>
+From: Laurent Vivier <address@hidden>
+>
+> If I compare with kernel, it looks good:
+>
+> ...
+>
+> I think there is no problem.
+>
+>
+Sure, thanks for such fast response - again, I am glad if you are right.
+>
+However, for some reason, glibc (and musl too) define sigset_t differently
+>
+than kernel. Please take a look. I am not sure if this is covered fine in our
+>
+code.
+Yeah, the libc definitions of sigset_t don't match the
+kernel ones (this is for obscure historical reasons IIRC).
+We're providing implementations of the target
+syscall interface, so our target_sigset_t should be the
+target kernel's version (and the target libc's version doesn't
+matter to us). On the other hand we will be using the
+host libc version, I think, so a little caution is required
+and it's possible we have some bugs in our code.
+
+thanks
+-- PMM
+
+>
+From: Peter Maydell <address@hidden>
+>
+>
+On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
+>
+>
+>
+> From: Laurent Vivier <address@hidden>
+>
+> > If I compare with kernel, it looks good:
+>
+> > ...
+>
+> > I think there is no problem.
+>
+>
+>
+> Sure, thanks for such fast response - again, I am glad if you are right.
+>
+> However, for some reason, glibc (and musl too) define sigset_t differently
+>
+> than kernel. Please take a look. I am not sure if this is covered fine in
+>
+> our code.
+>
+>
+Yeah, the libc definitions of sigset_t don't match the
+>
+kernel ones (this is for obscure historical reasons IIRC).
+>
+We're providing implementations of the target
+>
+syscall interface, so our target_sigset_t should be the
+>
+target kernel's version (and the target libc's version doesn't
+>
+matter to us). On the other hand we will be using the
+>
+host libc version, I think, so a little caution is required
+>
+and it's possible we have some bugs in our code.
+OK, I gather than this is not something that requires our immediate attention 
+(for 4.1), but we can analyze it later on.
+
+Thanks for response!!
+
+Sincerely,
+Aleksandar
+
+>
+thanks
+>
+-- PMM
+
+Le 03/07/2019 à 22:28, Peter Maydell a écrit :
+>
+On Wed, 3 Jul 2019 at 21:20, Aleksandar Markovic <address@hidden> wrote:
+>
+>
+>
+> From: Laurent Vivier <address@hidden>
+>
+>> If I compare with kernel, it looks good:
+>
+>> ...
+>
+>> I think there is no problem.
+>
+>
+>
+> Sure, thanks for such fast response - again, I am glad if you are right.
+>
+> However, for some reason, glibc (and musl too) define sigset_t differently
+>
+> than kernel. Please take a look. I am not sure if this is covered fine in
+>
+> our code.
+>
+>
+Yeah, the libc definitions of sigset_t don't match the
+>
+kernel ones (this is for obscure historical reasons IIRC).
+>
+We're providing implementations of the target
+>
+syscall interface, so our target_sigset_t should be the
+>
+target kernel's version (and the target libc's version doesn't
+>
+matter to us). On the other hand we will be using the
+>
+host libc version, I think, so a little caution is required
+>
+and it's possible we have some bugs in our code.
+It's why we need host_to_target_sigset_internal() and
+target_to_host_sigset_internal() that translates bits and bytes between
+guest kernel interface and host libc interface.
+
+void host_to_target_sigset_internal(target_sigset_t *d,
+                                    const sigset_t *s)
+{
+    int i;
+    target_sigemptyset(d);
+    for (i = 1; i <= TARGET_NSIG; i++) {
+        if (sigismember(s, i)) {
+            target_sigaddset(d, host_to_target_signal(i));
+        }
+    }
+}
+
+void target_to_host_sigset_internal(sigset_t *d,
+                                    const target_sigset_t *s)
+{
+    int i;
+    sigemptyset(d);
+    for (i = 1; i <= TARGET_NSIG; i++) {
+        if (target_sigismember(s, i)) {
+            sigaddset(d, target_to_host_signal(i));
+        }
+    }
+}
+
+Thanks,
+Laurent
+
+Hi Aleksandar,
+
+On Wed, Jul 3, 2019 at 12:48 PM Aleksandar Markovic
+<address@hidden> wrote:
+>
+#define TARGET_NSIG_BPW    TARGET_ABI_BITS
+>
+#define TARGET_NSIG_WORDS  (TARGET_NSIG / TARGET_NSIG_BPW)
+>
+>
+typedef struct {
+>
+abi_ulong sig[TARGET_NSIG_WORDS];
+>
+} target_sigset_t;
+>
+>
+... TARGET_ABI_BITS should be replaced by eight times smaller constant (in
+>
+fact,
+>
+semantically, we need TARGET_ABI_BYTES, but it is not defined) (what is needed
+>
+is actually "a byte per signal" in target_sigset_t, and we allow "a bit per
+>
+signal").
+Why do we need a byte per target signal, if the functions in linux-user/signal.c
+operate with bits?
+
+-- 
+Thanks.
+-- Max
+
+>
+Why do we need a byte per target signal, if the functions in
+>
+linux-user/signal.c
+>
+operate with bits?
+Max,
+
+I did not base my findings on code analysis, but on dumping size/offsets of 
+elements of some structures, as they are emulated in QEMU, and in real systems. 
+So, I can't really answer your question.
+
+Yours,
+Aleksandar
+
+>
+--
+>
+Thanks.
+>
+-- Max
+
diff --git a/results/classifier/zero-shot/010/review/02572177 b/results/classifier/zero-shot/010/review/02572177
new file mode 100644
index 00000000..eaffff1d
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/02572177
@@ -0,0 +1,445 @@
+other: 0.869
+permissions: 0.812
+device: 0.791
+performance: 0.781
+semantic: 0.770
+debug: 0.756
+graphic: 0.747
+socket: 0.742
+PID: 0.731
+network: 0.708
+vnc: 0.706
+KVM: 0.669
+boot: 0.658
+files: 0.640
+debug: 0.942
+files: 0.236
+performance: 0.061
+PID: 0.058
+other: 0.031
+network: 0.025
+boot: 0.016
+socket: 0.016
+device: 0.011
+semantic: 0.006
+permissions: 0.003
+graphic: 0.002
+KVM: 0.002
+vnc: 0.001
+
+[Qemu-devel] 答复: Re:  [BUG]COLO failover hang
+
+hi.
+
+
+I test the git qemu master have the same problem.
+
+
+(gdb) bt
+
+
+#0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880, niov=1, 
+fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+
+
+#1  0x00007f658e4aa0c2 in qio_channel_read (address@hidden, address@hidden "", 
+address@hidden, address@hidden) at io/channel.c:114
+
+
+#2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞, 
+buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at 
+migration/qemu-file-channel.c:78
+
+
+#3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at 
+migration/qemu-file.c:295
+
+
+#4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden, address@hidden) at 
+migration/qemu-file.c:555
+
+
+#5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at 
+migration/qemu-file.c:568
+
+
+#6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at 
+migration/qemu-file.c:648
+
+
+#7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800, 
+address@hidden) at migration/colo.c:244
+
+
+#8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized out＞, 
+address@hidden, address@hidden)
+
+
+    at migration/colo.c:264
+
+
+#9  0x00007f658e3e740e in colo_process_incoming_thread (opaque=0x7f658eb30360 
+＜mis_current.31286＞) at migration/colo.c:577
+
+
+#10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+
+
+#11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+
+
+(gdb) p ioc-＞name
+
+
+$2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+
+
+(gdb) p ioc-＞features          Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+
+
+$3 = 0
+
+
+
+
+
+(gdb) bt
+
+
+#0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90, condition=G_IO_IN, 
+opaque=0x7fdcceeafa90) at migration/socket.c:137
+
+
+#1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at 
+gmain.c:3054
+
+
+#2  g_main_context_dispatch (context=＜optimized out＞, address@hidden) at 
+gmain.c:3630
+
+
+#3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+
+
+#4  os_host_main_loop_wait (timeout=＜optimized out＞) at util/main-loop.c:258
+
+
+#5  main_loop_wait (address@hidden) at util/main-loop.c:506
+
+
+#6  0x00007fdccb526187 in main_loop () at vl.c:1898
+
+
+#7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized out＞) at 
+vl.c:4709
+
+
+(gdb) p ioc-＞features
+
+
+$1 = 6
+
+
+(gdb) p ioc-＞name
+
+
+$2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+
+
+
+
+
+May be socket_accept_incoming_migration should call 
+qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+
+
+
+
+
+thank you.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月16日 14:46
+主 题 ：Re: [Qemu-devel] COLO failover hang
+
+
+
+
+
+
+
+On 03/15/2017 05:06 PM, wangguang wrote:
+＞   am testing QEMU COLO feature described here [QEMU
+＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞
+＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ hang at recvmsg in qio_channel_socket_readv.
+＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞
+＞ I found that the colo in qemu is not complete yet.
+＞ Do the colo have any plan for development?
+
+Yes, We are developing. You can see some of patch we pushing.
+
+＞ Has anyone ever run it successfully? Any help is appreciated!
+
+In our internal version can run it successfully,
+The failover detail you can ask Zhanghailiang for help.
+Next time if you have some question about COLO,
+please cc me and zhanghailiang address@hidden
+
+
+Thanks
+Zhang Chen
+
+
+＞
+＞
+＞
+＞ centos7.2+qemu2.7.50
+＞ (gdb) bt
+＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ io/channel-socket.c:497
+＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ address@hidden "", address@hidden,
+＞ address@hidden) at io/channel.c:97
+＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ migration/qemu-file-channel.c:78
+＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ migration/qemu-file.c:257
+＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ address@hidden) at migration/qemu-file.c:510
+＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ migration/qemu-file.c:523
+＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ migration/qemu-file.c:603
+＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ address@hidden) at migration/colo.c:215
+＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ migration/colo.c:546
+＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ migration/colo.c:649
+＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞
+＞
+＞
+＞
+＞
+＞ --
+＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ Sent from the Developer mailing list archive at Nabble.com.
+＞
+＞
+＞
+＞
+
+-- 
+Thanks
+Zhang Chen
+
+Hi,Wang.
+
+You can test this branch:
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+and please follow wiki ensure your own configuration correctly.
+http://wiki.qemu-project.org/Features/COLO
+Thanks
+
+Zhang Chen
+
+
+On 03/21/2017 03:27 PM, address@hidden wrote:
+hi.
+
+I test the git qemu master have the same problem.
+
+(gdb) bt
+#0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+#1  0x00007f658e4aa0c2 in qio_channel_read
+(address@hidden, address@hidden "",
+address@hidden, address@hidden) at io/channel.c:114
+#2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+migration/qemu-file-channel.c:78
+#3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+migration/qemu-file.c:295
+#4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+address@hidden) at migration/qemu-file.c:555
+#5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+migration/qemu-file.c:568
+#6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+migration/qemu-file.c:648
+#7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+address@hidden) at migration/colo.c:244
+#8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+out＞, address@hidden,
+address@hidden)
+at migration/colo.c:264
+#9  0x00007f658e3e740e in colo_process_incoming_thread
+(opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+#10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+
+#11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+
+(gdb) p ioc-＞name
+
+$2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+
+(gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+
+$3 = 0
+
+
+(gdb) bt
+#0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+#1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+gmain.c:3054
+#2  g_main_context_dispatch (context=＜optimized out＞,
+address@hidden) at gmain.c:3630
+#3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+#4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+util/main-loop.c:258
+#5  main_loop_wait (address@hidden) at
+util/main-loop.c:506
+#6  0x00007fdccb526187 in main_loop () at vl.c:1898
+#7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+out＞) at vl.c:4709
+(gdb) p ioc-＞features
+
+$1 = 6
+
+(gdb) p ioc-＞name
+
+$2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+May be socket_accept_incoming_migration should
+call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+thank you.
+
+
+
+
+
+原始邮件
+address@hidden;
+*收件人：*王广10165992;address@hidden;
+address@hidden;address@hidden;
+*日 期 ：*2017年03月16日 14:46
+*主 题 ：**Re: [Qemu-devel] COLO failover hang*
+
+
+
+
+On 03/15/2017 05:06 PM, wangguang wrote:
+＞   am testing QEMU COLO feature described here [QEMU
+＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞
+＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ hang at recvmsg in qio_channel_socket_readv.
+＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞
+＞ I found that the colo in qemu is not complete yet.
+＞ Do the colo have any plan for development?
+
+Yes, We are developing. You can see some of patch we pushing.
+
+＞ Has anyone ever run it successfully? Any help is appreciated!
+
+In our internal version can run it successfully,
+The failover detail you can ask Zhanghailiang for help.
+Next time if you have some question about COLO,
+please cc me and zhanghailiang address@hidden
+
+
+Thanks
+Zhang Chen
+
+
+＞
+＞
+＞
+＞ centos7.2+qemu2.7.50
+＞ (gdb) bt
+＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ io/channel-socket.c:497
+＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ address@hidden "", address@hidden,
+＞ address@hidden) at io/channel.c:97
+＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ migration/qemu-file-channel.c:78
+＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ migration/qemu-file.c:257
+＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ address@hidden) at migration/qemu-file.c:510
+＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ migration/qemu-file.c:523
+＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ migration/qemu-file.c:603
+＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ address@hidden) at migration/colo.c:215
+＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ migration/colo.c:546
+＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ migration/colo.c:649
+＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞
+＞
+＞
+＞
+＞
+＞ --
+＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ Sent from the Developer mailing list archive at Nabble.com.
+＞
+＞
+＞
+＞
+
+--
+Thanks
+Zhang Chen
+--
+Thanks
+Zhang Chen
+
diff --git a/results/classifier/zero-shot/010/review/05479587 b/results/classifier/zero-shot/010/review/05479587
new file mode 100644
index 00000000..debf97d8
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/05479587
@@ -0,0 +1,107 @@
+network: 0.963
+semantic: 0.866
+device: 0.811
+socket: 0.716
+performance: 0.669
+PID: 0.618
+permissions: 0.584
+graphic: 0.576
+boot: 0.474
+vnc: 0.464
+files: 0.395
+KVM: 0.374
+debug: 0.314
+other: 0.200
+debug: 0.967
+network: 0.931
+device: 0.063
+files: 0.056
+permissions: 0.051
+semantic: 0.049
+socket: 0.032
+boot: 0.031
+PID: 0.027
+other: 0.022
+performance: 0.010
+vnc: 0.007
+KVM: 0.005
+graphic: 0.003
+
+[Qemu-devel]  [BUG] network qga : windows os lost ip address of the network card  in some cases
+
+We think this problem coulde be solevd in qga modules。can anybody give some 
+advice ?
+
+
+[BUG] network : windows os lost ip address of the network card  in some cases
+
+we  found this problem for a long time 。For example, if we has three network 
+card in virtual xml file ，such as "network connection 1" / "network connection 
+2"/"network connection 3" 。
+
+Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
+delete the first card ，reboot the windows virtual os, then this problem 
+happened !
+
+
+
+
+we found that the sencond network card will  replace the first one , then the 
+ip address of "network connection 2 " become 192.168.1.1 。
+
+
+Our third party users began to complain about this bug 。All the business of the 
+second ip  lost !!! 
+
+I mean both of windows and linux has this bug ,  we solve this bug in linux  
+throught bonding netcrad pci and mac address 。
+
+There is no good solution on windows os . thera are ?  we implemented a plan to 
+resumption of IP by QGA.  Is there a better way ?
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人：尹作为10144574
+收件人： address@hidden
+日 期 ：2017年04月14日 16:46
+主 题 ：[BUG] network : windows os lost ip address of the network card  in some 
+cases
+
+
+
+
+
+
+we  found this problem for a long time 。For example, if we has three network 
+card in virtual xml file ，such as "network connection 1" / "network connection 
+2"/"network connection 3" 。
+
+Echo network card has own ip address ，such as 192.168.1.1 / 2.1 /3.1 , when 
+delete the first card ，reboot the windows virtual os, then this problem 
+happened !
+
+
+
+
+we found that the sencond network card will  replace the first one , then the 
+ip address of "network connection 2 " become 192.168.1.1 。
+
+
+Our third party users began to complain about this bug 。All the business of the 
+second ip  lost !!! 
+
+I mean both of windows and linux has this bug ,  we solve this bug in linux  
+throught bonding netcrad pci and mac address 。
+
+There is no good solution on windows os . thera are ?  we implemented a plan to 
+resumption of IP by QGA.  Is there a better way ?
+
diff --git a/results/classifier/zero-shot/010/review/11357571 b/results/classifier/zero-shot/010/review/11357571
new file mode 100644
index 00000000..4ad5f3ac
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/11357571
@@ -0,0 +1,71 @@
+vnc: 0.950
+graphic: 0.915
+performance: 0.806
+device: 0.763
+network: 0.705
+semantic: 0.694
+other: 0.687
+PID: 0.681
+socket: 0.600
+debug: 0.572
+boot: 0.571
+permissions: 0.517
+KVM: 0.516
+files: 0.453
+debug: 0.960
+vnc: 0.815
+network: 0.605
+graphic: 0.186
+boot: 0.049
+performance: 0.042
+other: 0.026
+files: 0.022
+PID: 0.011
+device: 0.007
+socket: 0.004
+semantic: 0.003
+KVM: 0.003
+permissions: 0.002
+
+[Qemu-devel] [BUG] VNC: client won't send FramebufferUpdateRequest if job in flight is aborted
+
+Hi Gerd, Daniel.
+
+We noticed that if VncSharePolicy was configured with 
+VNC_SHARE_POLICY_FORCE_SHARED mode and
+multiple vnc clients opened vnc connections, some clients could go blank screen 
+at high probability.
+This problem can be reproduced when we regularly reboot suse12sp3 in graphic 
+mode both
+with RealVNC and noVNC client.
+
+Then we dig into it and find out that some clients go blank screen because they 
+don't
+send FramebufferUpdateRequest any more. One step further, we notice that each 
+time
+the job in flight is aborted one client go blank screen.
+
+The bug is triggered in the following procedure.
+Guest reboot => graphic mode switch => graphic_hw_update =>  vga_update_display
+=> vga_draw_graphic (full_update = 1) => dpy_gfx_replace_surface => 
+vnc_dpy_switch =>
+vnc_abort_display_jobs (client may have job in flight) => job removed from the 
+queue
+If one client has vnc job in flight, *vnc_abort_display_jobs* will wait until 
+its job is abandoned.
+This behavior is done in vnc_worker_thread_loop when 'if (job->vs->ioc == NULL 
+|| job->vs->abort == true)'
+branch is taken.
+
+As we can see, *vnc_abort_display_jobs* is intended to do some optimization to 
+avoid unnecessary client update.
+But if client sends FramebufferUpdateRequest for some graphic area and its 
+FramebufferUpdate response job
+is abandoned, the client may wait for the response and never send new 
+FramebufferUpdateRequest, which may
+case the client go blank screen forever.
+
+So I am wondering whether we should drop the *vnc_abort_display_jobs*  
+optimization  or do some trick here
+to push the client to send new FramebufferUpdateRequest. Do you have any idea ?
+
diff --git a/results/classifier/zero-shot/010/review/11933524 b/results/classifier/zero-shot/010/review/11933524
new file mode 100644
index 00000000..2db45133
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/11933524
@@ -0,0 +1,1149 @@
+PID: 0.791
+other: 0.771
+device: 0.762
+permissions: 0.752
+debug: 0.752
+socket: 0.751
+boot: 0.743
+graphic: 0.737
+performance: 0.736
+vnc: 0.695
+KVM: 0.689
+semantic: 0.673
+network: 0.662
+files: 0.660
+debug: 0.943
+boot: 0.907
+device: 0.024
+files: 0.023
+PID: 0.022
+semantic: 0.005
+other: 0.005
+KVM: 0.003
+permissions: 0.003
+performance: 0.003
+graphic: 0.001
+network: 0.001
+socket: 0.001
+vnc: 0.000
+
+[BUG] hw/i386/pc.c: CXL Fixed Memory Window should not reserve e820 in bios
+
+Early-boot e820 records will be inserted by the bios/efi/early boot
+software and be reported to the kernel via insert_resource.  Later, when
+CXL drivers iterate through the regions again, they will insert another
+resource and make the RESERVED memory area a child.
+
+This RESERVED memory area causes the memory region to become unusable,
+and as a result attempting to create memory regions with
+
+    `cxl create-region ...`
+
+Will fail due to the RESERVED area intersecting with the CXL window.
+
+
+During boot the following traceback is observed:
+
+0xffffffff81101650 in insert_resource_expand_to_fit ()
+0xffffffff83d964c5 in e820__reserve_resources_late ()
+0xffffffff83e03210 in pcibios_resource_survey ()
+0xffffffff83e04f4a in pcibios_init ()
+
+Which produces a call to reserve the CFMWS area:
+
+(gdb) p *new
+$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
+       flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
+       child = 0x0}
+
+Later the Kernel parses ACPI tables and reserves the exact same area as
+the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
+retains the RESERVED region and makes it a child of the new region.
+
+0xffffffff811016a4 in insert_resource_conflict ()
+                      insert_resource ()
+0xffffffff81a81389 in cxl_parse_cfmws ()
+0xffffffff818c4a81 in call_handler ()
+                      acpi_parse_entries_array ()
+
+(gdb) p/x *new
+$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
+       flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
+       child = 0x0}
+
+This produces the following output in /proc/iomem:
+
+590000000-68fffffff : CXL Window 0
+  590000000-68fffffff : Reserved
+
+This reserved area causes `get_free_mem_region()` to fail due to a check
+against `__region_intersects()`.  Due to this reserved area, the
+intersect check will only ever return REGION_INTERSECTS, which causes
+`cxl create-region` to always fail.
+
+Signed-off-by: Gregory Price <gregory.price@memverge.com>
+---
+ hw/i386/pc.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+index 566accf7e6..5bf5465a21 100644
+--- a/hw/i386/pc.c
++++ b/hw/i386/pc.c
+@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+         hwaddr cxl_size = MiB;
+ 
+         cxl_base = pc_get_cxl_range_start(pcms);
+-        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+         memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+         memory_region_add_subregion(system_memory, cxl_base, mr);
+         cxl_resv_end = cxl_base + cxl_size;
+@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+                 memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
+                                       "cxl-fixed-memory-region", fw->size);
+                 memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+-                e820_add_entry(fw->base, fw->size, E820_RESERVED);
+                 cxl_fmw_base += fw->size;
+                 cxl_resv_end = cxl_fmw_base;
+             }
+-- 
+2.37.3
+
+Early-boot e820 records will be inserted by the bios/efi/early boot
+software and be reported to the kernel via insert_resource.  Later, when
+CXL drivers iterate through the regions again, they will insert another
+resource and make the RESERVED memory area a child.
+
+This RESERVED memory area causes the memory region to become unusable,
+and as a result attempting to create memory regions with
+
+     `cxl create-region ...`
+
+Will fail due to the RESERVED area intersecting with the CXL window.
+
+
+During boot the following traceback is observed:
+
+0xffffffff81101650 in insert_resource_expand_to_fit ()
+0xffffffff83d964c5 in e820__reserve_resources_late ()
+0xffffffff83e03210 in pcibios_resource_survey ()
+0xffffffff83e04f4a in pcibios_init ()
+
+Which produces a call to reserve the CFMWS area:
+
+(gdb) p *new
+$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
+        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
+        child = 0x0}
+
+Later the Kernel parses ACPI tables and reserves the exact same area as
+the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
+retains the RESERVED region and makes it a child of the new region.
+
+0xffffffff811016a4 in insert_resource_conflict ()
+                       insert_resource ()
+0xffffffff81a81389 in cxl_parse_cfmws ()
+0xffffffff818c4a81 in call_handler ()
+                       acpi_parse_entries_array ()
+
+(gdb) p/x *new
+$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
+        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
+        child = 0x0}
+
+This produces the following output in /proc/iomem:
+
+590000000-68fffffff : CXL Window 0
+   590000000-68fffffff : Reserved
+
+This reserved area causes `get_free_mem_region()` to fail due to a check
+against `__region_intersects()`.  Due to this reserved area, the
+intersect check will only ever return REGION_INTERSECTS, which causes
+`cxl create-region` to always fail.
+
+Signed-off-by: Gregory Price <gregory.price@memverge.com>
+---
+  hw/i386/pc.c | 2 --
+  1 file changed, 2 deletions(-)
+
+diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+index 566accf7e6..5bf5465a21 100644
+--- a/hw/i386/pc.c
++++ b/hw/i386/pc.c
+@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+          hwaddr cxl_size = MiB;
+cxl_base = pc_get_cxl_range_start(pcms);
+-        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+          memory_region_add_subregion(system_memory, cxl_base, mr);
+          cxl_resv_end = cxl_base + cxl_size;
+@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+                  memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, 
+fw,
+                                        "cxl-fixed-memory-region", fw->size);
+                  memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+Or will this be subregion of cxl_base?
+
+Thanks,
+Pankaj
+-                e820_add_entry(fw->base, fw->size, E820_RESERVED);
+                  cxl_fmw_base += fw->size;
+                  cxl_resv_end = cxl_fmw_base;
+              }
+
+>
+> -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+>           memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+>
+>           memory_region_add_subregion(system_memory, cxl_base, mr);
+>
+>           cxl_resv_end = cxl_base + cxl_size;
+>
+> @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+>                   memory_region_init_io(&fw->mr, OBJECT(machine),
+>
+> &cfmws_ops, fw,
+>
+>                                         "cxl-fixed-memory-region",
+>
+> fw->size);
+>
+>                   memory_region_add_subregion(system_memory, fw->base,
+>
+> &fw->mr);
+>
+>
+Or will this be subregion of cxl_base?
+>
+>
+Thanks,
+>
+Pankaj
+The memory region backing this memory area still has to be initialized
+and added in the QEMU system, but it will now be initialized for use by
+linux after PCI/ACPI setup occurs and the CXL driver discovers it via
+CDAT.
+
+It's also still possible to assign this area a static memory region at
+bool by setting up the SRATs in the ACPI tables, but that patch is not
+upstream yet.
+
+On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <gourry.memverge@gmail.com> wrote:
+>
+>
+Early-boot e820 records will be inserted by the bios/efi/early boot
+>
+software and be reported to the kernel via insert_resource.  Later, when
+>
+CXL drivers iterate through the regions again, they will insert another
+>
+resource and make the RESERVED memory area a child.
+I have already sent a patch
+https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
+.
+When the patch is applied, there would not be any reserved entries
+even with passing E820_RESERVED .
+So this patch needs to be evaluated in the light of the above patch I
+sent. Once you apply my patch, does the issue still exist?
+
+>
+>
+This RESERVED memory area causes the memory region to become unusable,
+>
+and as a result attempting to create memory regions with
+>
+>
+`cxl create-region ...`
+>
+>
+Will fail due to the RESERVED area intersecting with the CXL window.
+>
+>
+>
+During boot the following traceback is observed:
+>
+>
+0xffffffff81101650 in insert_resource_expand_to_fit ()
+>
+0xffffffff83d964c5 in e820__reserve_resources_late ()
+>
+0xffffffff83e03210 in pcibios_resource_survey ()
+>
+0xffffffff83e04f4a in pcibios_init ()
+>
+>
+Which produces a call to reserve the CFMWS area:
+>
+>
+(gdb) p *new
+>
+$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
+>
+flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
+>
+child = 0x0}
+>
+>
+Later the Kernel parses ACPI tables and reserves the exact same area as
+>
+the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
+>
+retains the RESERVED region and makes it a child of the new region.
+>
+>
+0xffffffff811016a4 in insert_resource_conflict ()
+>
+insert_resource ()
+>
+0xffffffff81a81389 in cxl_parse_cfmws ()
+>
+0xffffffff818c4a81 in call_handler ()
+>
+acpi_parse_entries_array ()
+>
+>
+(gdb) p/x *new
+>
+$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
+>
+flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
+>
+child = 0x0}
+>
+>
+This produces the following output in /proc/iomem:
+>
+>
+590000000-68fffffff : CXL Window 0
+>
+590000000-68fffffff : Reserved
+>
+>
+This reserved area causes `get_free_mem_region()` to fail due to a check
+>
+against `__region_intersects()`.  Due to this reserved area, the
+>
+intersect check will only ever return REGION_INTERSECTS, which causes
+>
+`cxl create-region` to always fail.
+>
+>
+Signed-off-by: Gregory Price <gregory.price@memverge.com>
+>
+---
+>
+hw/i386/pc.c | 2 --
+>
+1 file changed, 2 deletions(-)
+>
+>
+diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+index 566accf7e6..5bf5465a21 100644
+>
+--- a/hw/i386/pc.c
+>
++++ b/hw/i386/pc.c
+>
+@@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+hwaddr cxl_size = MiB;
+>
+>
+cxl_base = pc_get_cxl_range_start(pcms);
+>
+-        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+>
+memory_region_add_subregion(system_memory, cxl_base, mr);
+>
+cxl_resv_end = cxl_base + cxl_size;
+>
+@@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops,
+>
+fw,
+>
+"cxl-fixed-memory-region", fw->size);
+>
+memory_region_add_subregion(system_memory, fw->base,
+>
+&fw->mr);
+>
+-                e820_add_entry(fw->base, fw->size, E820_RESERVED);
+>
+cxl_fmw_base += fw->size;
+>
+cxl_resv_end = cxl_fmw_base;
+>
+}
+>
+--
+>
+2.37.3
+>
+
+This patch does not resolve the issue, reserved entries are still created.
+[    0.000000] BIOS-e820: [mem 0x0000000280000000-0x00000002800fffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000290000000-0x000000029fffffff] reserved
+# cat /proc/iomem
+290000000-29fffffff : CXL Window 0
+  290000000-29fffffff : Reserved
+# cxl create-region -m -d decoder0.0 -w 1 -g 256 mem0
+cxl region: create_region: region0: set_size failed: Numerical result out of range
+cxl region: cmd_create_region: created 0 regions
+On Tue, Oct 18, 2022 at 2:05 AM Ani Sinha <
+ani@anisinha.ca
+> wrote:
+On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <
+gourry.memverge@gmail.com
+> wrote:
+>
+> Early-boot e820 records will be inserted by the bios/efi/early boot
+> software and be reported to the kernel via insert_resource.  Later, when
+> CXL drivers iterate through the regions again, they will insert another
+> resource and make the RESERVED memory area a child.
+I have already sent a patch
+https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
+.
+When the patch is applied, there would not be any reserved entries
+even with passing E820_RESERVED .
+So this patch needs to be evaluated in the light of the above patch I
+sent. Once you apply my patch, does the issue still exist?
+>
+> This RESERVED memory area causes the memory region to become unusable,
+> and as a result attempting to create memory regions with
+>
+>     `cxl create-region ...`
+>
+> Will fail due to the RESERVED area intersecting with the CXL window.
+>
+>
+> During boot the following traceback is observed:
+>
+> 0xffffffff81101650 in insert_resource_expand_to_fit ()
+> 0xffffffff83d964c5 in e820__reserve_resources_late ()
+> 0xffffffff83e03210 in pcibios_resource_survey ()
+> 0xffffffff83e04f4a in pcibios_init ()
+>
+> Which produces a call to reserve the CFMWS area:
+>
+> (gdb) p *new
+> $54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
+>        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
+>        child = 0x0}
+>
+> Later the Kernel parses ACPI tables and reserves the exact same area as
+> the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
+> retains the RESERVED region and makes it a child of the new region.
+>
+> 0xffffffff811016a4 in insert_resource_conflict ()
+>                       insert_resource ()
+> 0xffffffff81a81389 in cxl_parse_cfmws ()
+> 0xffffffff818c4a81 in call_handler ()
+>                       acpi_parse_entries_array ()
+>
+> (gdb) p/x *new
+> $59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
+>        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
+>        child = 0x0}
+>
+> This produces the following output in /proc/iomem:
+>
+> 590000000-68fffffff : CXL Window 0
+>   590000000-68fffffff : Reserved
+>
+> This reserved area causes `get_free_mem_region()` to fail due to a check
+> against `__region_intersects()`.  Due to this reserved area, the
+> intersect check will only ever return REGION_INTERSECTS, which causes
+> `cxl create-region` to always fail.
+>
+> Signed-off-by: Gregory Price <
+gregory.price@memverge.com
+>
+> ---
+>  hw/i386/pc.c | 2 --
+>  1 file changed, 2 deletions(-)
+>
+> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+> index 566accf7e6..5bf5465a21 100644
+> --- a/hw/i386/pc.c
+> +++ b/hw/i386/pc.c
+> @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>          hwaddr cxl_size = MiB;
+>
+>          cxl_base = pc_get_cxl_range_start(pcms);
+> -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+>          memory_region_add_subregion(system_memory, cxl_base, mr);
+>          cxl_resv_end = cxl_base + cxl_size;
+> @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+>                  memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
+>                                        "cxl-fixed-memory-region", fw->size);
+>                  memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+> -                e820_add_entry(fw->base, fw->size, E820_RESERVED);
+>                  cxl_fmw_base += fw->size;
+>                  cxl_resv_end = cxl_fmw_base;
+>              }
+> --
+> 2.37.3
+>
+
++Gerd Hoffmann
+
+On Tue, Oct 18, 2022 at 8:16 PM Gregory Price <gourry.memverge@gmail.com> wrote:
+>
+>
+This patch does not resolve the issue, reserved entries are still created.
+>
+>
+[    0.000000] BIOS-e820: [mem 0x0000000280000000-0x00000002800fffff] reserved
+>
+[    0.000000] BIOS-e820: [mem 0x0000000290000000-0x000000029fffffff] reserved
+>
+>
+# cat /proc/iomem
+>
+290000000-29fffffff : CXL Window 0
+>
+290000000-29fffffff : Reserved
+>
+>
+# cxl create-region -m -d decoder0.0 -w 1 -g 256 mem0
+>
+cxl region: create_region: region0: set_size failed: Numerical result out of
+>
+range
+>
+cxl region: cmd_create_region: created 0 regions
+>
+>
+On Tue, Oct 18, 2022 at 2:05 AM Ani Sinha <ani@anisinha.ca> wrote:
+>
+>
+>
+> On Tue, Oct 18, 2022 at 5:14 AM Gregory Price <gourry.memverge@gmail.com>
+>
+> wrote:
+>
+> >
+>
+> > Early-boot e820 records will be inserted by the bios/efi/early boot
+>
+> > software and be reported to the kernel via insert_resource.  Later, when
+>
+> > CXL drivers iterate through the regions again, they will insert another
+>
+> > resource and make the RESERVED memory area a child.
+>
+>
+>
+> I have already sent a patch
+>
+>
+https://www.mail-archive.com/qemu-devel@nongnu.org/msg882012.html
+.
+>
+> When the patch is applied, there would not be any reserved entries
+>
+> even with passing E820_RESERVED .
+>
+> So this patch needs to be evaluated in the light of the above patch I
+>
+> sent. Once you apply my patch, does the issue still exist?
+>
+>
+>
+> >
+>
+> > This RESERVED memory area causes the memory region to become unusable,
+>
+> > and as a result attempting to create memory regions with
+>
+> >
+>
+> >     `cxl create-region ...`
+>
+> >
+>
+> > Will fail due to the RESERVED area intersecting with the CXL window.
+>
+> >
+>
+> >
+>
+> > During boot the following traceback is observed:
+>
+> >
+>
+> > 0xffffffff81101650 in insert_resource_expand_to_fit ()
+>
+> > 0xffffffff83d964c5 in e820__reserve_resources_late ()
+>
+> > 0xffffffff83e03210 in pcibios_resource_survey ()
+>
+> > 0xffffffff83e04f4a in pcibios_init ()
+>
+> >
+>
+> > Which produces a call to reserve the CFMWS area:
+>
+> >
+>
+> > (gdb) p *new
+>
+> > $54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
+>
+> >        flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
+>
+> >        child = 0x0}
+>
+> >
+>
+> > Later the Kernel parses ACPI tables and reserves the exact same area as
+>
+> > the CXL Fixed Memory Window.  The use of `insert_resource_conflict`
+>
+> > retains the RESERVED region and makes it a child of the new region.
+>
+> >
+>
+> > 0xffffffff811016a4 in insert_resource_conflict ()
+>
+> >                       insert_resource ()
+>
+> > 0xffffffff81a81389 in cxl_parse_cfmws ()
+>
+> > 0xffffffff818c4a81 in call_handler ()
+>
+> >                       acpi_parse_entries_array ()
+>
+> >
+>
+> > (gdb) p/x *new
+>
+> > $59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
+>
+> >        flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
+>
+> >        child = 0x0}
+>
+> >
+>
+> > This produces the following output in /proc/iomem:
+>
+> >
+>
+> > 590000000-68fffffff : CXL Window 0
+>
+> >   590000000-68fffffff : Reserved
+>
+> >
+>
+> > This reserved area causes `get_free_mem_region()` to fail due to a check
+>
+> > against `__region_intersects()`.  Due to this reserved area, the
+>
+> > intersect check will only ever return REGION_INTERSECTS, which causes
+>
+> > `cxl create-region` to always fail.
+>
+> >
+>
+> > Signed-off-by: Gregory Price <gregory.price@memverge.com>
+>
+> > ---
+>
+> >  hw/i386/pc.c | 2 --
+>
+> >  1 file changed, 2 deletions(-)
+>
+> >
+>
+> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+> > index 566accf7e6..5bf5465a21 100644
+>
+> > --- a/hw/i386/pc.c
+>
+> > +++ b/hw/i386/pc.c
+>
+> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+> >          hwaddr cxl_size = MiB;
+>
+> >
+>
+> >          cxl_base = pc_get_cxl_range_start(pcms);
+>
+> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+> >          memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+>
+> >          memory_region_add_subregion(system_memory, cxl_base, mr);
+>
+> >          cxl_resv_end = cxl_base + cxl_size;
+>
+> > @@ -1077,7 +1076,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+> >                  memory_region_init_io(&fw->mr, OBJECT(machine),
+>
+> > &cfmws_ops, fw,
+>
+> >                                        "cxl-fixed-memory-region",
+>
+> > fw->size);
+>
+> >                  memory_region_add_subregion(system_memory, fw->base,
+>
+> > &fw->mr);
+>
+> > -                e820_add_entry(fw->base, fw->size, E820_RESERVED);
+>
+> >                  cxl_fmw_base += fw->size;
+>
+> >                  cxl_resv_end = cxl_fmw_base;
+>
+> >              }
+>
+> > --
+>
+> > 2.37.3
+>
+> >
+
+>
+>> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+>> > index 566accf7e6..5bf5465a21 100644
+>
+>> > --- a/hw/i386/pc.c
+>
+>> > +++ b/hw/i386/pc.c
+>
+>> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+>> >          hwaddr cxl_size = MiB;
+>
+>> >
+>
+>> >          cxl_base = pc_get_cxl_range_start(pcms);
+>
+>> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+Just dropping it doesn't look like a good plan to me.
+
+You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
+(both seabios and ovmf) read it and will make sure the 64bit pci mmio
+window is placed above that address, i.e. this effectively reserves
+address space.  Right now used by memory hotplug code, but should work
+for cxl too I think (disclaimer: don't know much about cxl ...).
+
+take care & HTH,
+  Gerd
+
+On Tue, 8 Nov 2022 12:21:11 +0100
+Gerd Hoffmann <kraxel@redhat.com> wrote:
+
+>
+> >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+> >> > index 566accf7e6..5bf5465a21 100644
+>
+> >> > --- a/hw/i386/pc.c
+>
+> >> > +++ b/hw/i386/pc.c
+>
+> >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+> >> >          hwaddr cxl_size = MiB;
+>
+> >> >
+>
+> >> >          cxl_base = pc_get_cxl_range_start(pcms);
+>
+> >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+>
+Just dropping it doesn't look like a good plan to me.
+>
+>
+You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
+>
+(both seabios and ovmf) read it and will make sure the 64bit pci mmio
+>
+window is placed above that address, i.e. this effectively reserves
+>
+address space.  Right now used by memory hotplug code, but should work
+>
+for cxl too I think (disclaimer: don't know much about cxl ...).
+As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
+at all, it' has its own mapping.
+
+Regardless of that, reserved E820 entries look wrong, and looking at
+commit message OS is right to bailout on them (expected according
+to ACPI spec).
+Also spec says 
+
+"
+E820 Assumptions and Limitations
+ [...]
+ The platform boot firmware does not return a range description for the memory 
+mapping of
+ PCI devices, ISA Option ROMs, and ISA Plug and Play cards because the OS has 
+mechanisms
+ available to detect them.
+"
+
+so dropping reserved entries looks reasonable from ACPI spec point of view.
+(disclaimer: don't know much about cxl ... either)
+>
+>
+take care & HTH,
+>
+Gerd
+>
+
+On Fri, Nov 11, 2022 at 11:51:23AM +0100, Igor Mammedov wrote:
+>
+On Tue, 8 Nov 2022 12:21:11 +0100
+>
+Gerd Hoffmann <kraxel@redhat.com> wrote:
+>
+>
+> > >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+> > >> > index 566accf7e6..5bf5465a21 100644
+>
+> > >> > --- a/hw/i386/pc.c
+>
+> > >> > +++ b/hw/i386/pc.c
+>
+> > >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+> > >> >          hwaddr cxl_size = MiB;
+>
+> > >> >
+>
+> > >> >          cxl_base = pc_get_cxl_range_start(pcms);
+>
+> > >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+>
+>
+> Just dropping it doesn't look like a good plan to me.
+>
+>
+>
+> You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
+>
+> (both seabios and ovmf) read it and will make sure the 64bit pci mmio
+>
+> window is placed above that address, i.e. this effectively reserves
+>
+> address space.  Right now used by memory hotplug code, but should work
+>
+> for cxl too I think (disclaimer: don't know much about cxl ...).
+>
+>
+As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
+>
+at all, it' has its own mapping.
+This should be changed.  cxl should make sure the highest address used
+is stored in etc/reserved-memory-end to avoid the firmware mapping pci
+resources there.
+
+>
+so dropping reserved entries looks reasonable from ACPI spec point of view.
+Yep, I don't want dispute that.
+
+I suspect the reason for these entries to exist in the first place is to
+inform the firmware that it should not place stuff there, and if we
+remove that to conform with the spec we need some alternative way for
+that ...
+
+take care,
+  Gerd
+
+On Fri, 11 Nov 2022 12:40:59 +0100
+Gerd Hoffmann <kraxel@redhat.com> wrote:
+
+>
+On Fri, Nov 11, 2022 at 11:51:23AM +0100, Igor Mammedov wrote:
+>
+> On Tue, 8 Nov 2022 12:21:11 +0100
+>
+> Gerd Hoffmann <kraxel@redhat.com> wrote:
+>
+>
+>
+> > > >> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+>
+> > > >> > index 566accf7e6..5bf5465a21 100644
+>
+> > > >> > --- a/hw/i386/pc.c
+>
+> > > >> > +++ b/hw/i386/pc.c
+>
+> > > >> > @@ -1061,7 +1061,6 @@ void pc_memory_init(PCMachineState *pcms,
+>
+> > > >> >          hwaddr cxl_size = MiB;
+>
+> > > >> >
+>
+> > > >> >          cxl_base = pc_get_cxl_range_start(pcms);
+>
+> > > >> > -        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+>
+> >
+>
+> > Just dropping it doesn't look like a good plan to me.
+>
+> >
+>
+> > You can try set etc/reserved-memory-end fw_cfg file instead.  Firmware
+>
+> > (both seabios and ovmf) read it and will make sure the 64bit pci mmio
+>
+> > window is placed above that address, i.e. this effectively reserves
+>
+> > address space.  Right now used by memory hotplug code, but should work
+>
+> > for cxl too I think (disclaimer: don't know much about cxl ...).
+>
+>
+>
+> As far as I know CXL impl. in QEMU isn't using etc/reserved-memory-end
+>
+> at all, it' has its own mapping.
+>
+>
+This should be changed.  cxl should make sure the highest address used
+>
+is stored in etc/reserved-memory-end to avoid the firmware mapping pci
+>
+resources there.
+if (pcmc->has_reserved_memory && machine->device_memory->base) {            
+ 
+[...]
+                                                             
+        if (pcms->cxl_devices_state.is_enabled) {                               
+ 
+            res_mem_end = cxl_resv_end;
+
+that should be handled by this line
+
+        }                                   
+                                     
+        *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));                     
+ 
+        fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));  
+ 
+    }  
+
+so SeaBIOS shouldn't intrude into CXL address space
+(I assume EDK2 behave similarly here)
+ 
+>
+> so dropping reserved entries looks reasonable from ACPI spec point of view.
+>
+>
+>
+>
+Yep, I don't want dispute that.
+>
+>
+I suspect the reason for these entries to exist in the first place is to
+>
+inform the firmware that it should not place stuff there, and if we
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+just to educate me, can you point out what SeaBIOS code does with reservations.
+
+>
+remove that to conform with the spec we need some alternative way for
+>
+that ...
+with etc/reserved-memory-end set as above,
+is E820_RESERVED really needed here?
+
+(my understanding was that E820_RESERVED weren't accounted for when
+initializing PCI devices)
+
+>
+>
+take care,
+>
+Gerd
+>
+
+>
+if (pcmc->has_reserved_memory && machine->device_memory->base) {
+>
+>
+[...]
+>
+>
+if (pcms->cxl_devices_state.is_enabled) {
+>
+>
+res_mem_end = cxl_resv_end;
+>
+>
+that should be handled by this line
+>
+>
+}
+>
+>
+*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
+>
+>
+fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val,
+>
+sizeof(*val));
+>
+}
+>
+>
+so SeaBIOS shouldn't intrude into CXL address space
+Yes, looks good, so with this in place already everyting should be fine.
+
+>
+(I assume EDK2 behave similarly here)
+Correct, ovmf reads that fw_cfg file too.
+
+>
+> I suspect the reason for these entries to exist in the first place is to
+>
+> inform the firmware that it should not place stuff there, and if we
+>
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+>
+just to educate me, can you point out what SeaBIOS code does with
+>
+reservations.
+They are added to the e820 map which gets passed on to the OS.  seabios
+uses (and updateas) the e820 map too, when allocating memory for
+example.  While thinking about it I'm not fully sure it actually looks
+at reservations, maybe it only uses (and updates) ram entries when
+allocating memory.
+
+>
+> remove that to conform with the spec we need some alternative way for
+>
+> that ...
+>
+>
+with etc/reserved-memory-end set as above,
+>
+is E820_RESERVED really needed here?
+No.  Setting etc/reserved-memory-end is enough.
+
+So for the original patch:
+Acked-by: Gerd Hoffmann <kraxel@redhat.com>
+
+take care,
+  Gerd
+
+On Fri, Nov 11, 2022 at 02:36:02PM +0100, Gerd Hoffmann wrote:
+>
+>     if (pcmc->has_reserved_memory && machine->device_memory->base) {
+>
+>
+>
+> [...]
+>
+>
+>
+>         if (pcms->cxl_devices_state.is_enabled) {
+>
+>
+>
+>             res_mem_end = cxl_resv_end;
+>
+>
+>
+> that should be handled by this line
+>
+>
+>
+>         }
+>
+>
+>
+>         *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
+>
+>
+>
+>         fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val,
+>
+> sizeof(*val));
+>
+>     }
+>
+>
+>
+> so SeaBIOS shouldn't intrude into CXL address space
+>
+>
+Yes, looks good, so with this in place already everyting should be fine.
+>
+>
+> (I assume EDK2 behave similarly here)
+>
+>
+Correct, ovmf reads that fw_cfg file too.
+>
+>
+> > I suspect the reason for these entries to exist in the first place is to
+>
+> > inform the firmware that it should not place stuff there, and if we
+>
+>        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+>
+> just to educate me, can you point out what SeaBIOS code does with
+>
+> reservations.
+>
+>
+They are added to the e820 map which gets passed on to the OS.  seabios
+>
+uses (and updateas) the e820 map too, when allocating memory for
+>
+example.  While thinking about it I'm not fully sure it actually looks
+>
+at reservations, maybe it only uses (and updates) ram entries when
+>
+allocating memory.
+>
+>
+> > remove that to conform with the spec we need some alternative way for
+>
+> > that ...
+>
+>
+>
+> with etc/reserved-memory-end set as above,
+>
+> is E820_RESERVED really needed here?
+>
+>
+No.  Setting etc/reserved-memory-end is enough.
+>
+>
+So for the original patch:
+>
+Acked-by: Gerd Hoffmann <kraxel@redhat.com>
+>
+>
+take care,
+>
+Gerd
+It's upstream already, sorry I can't add your tag.
+
+-- 
+MST
+
diff --git a/results/classifier/zero-shot/010/review/12360755 b/results/classifier/zero-shot/010/review/12360755
new file mode 100644
index 00000000..cd5156e6
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/12360755
@@ -0,0 +1,320 @@
+permissions: 0.930
+debug: 0.922
+semantic: 0.911
+device: 0.902
+graphic: 0.899
+performance: 0.895
+other: 0.886
+PID: 0.876
+files: 0.851
+boot: 0.818
+vnc: 0.810
+socket: 0.805
+KVM: 0.770
+network: 0.738
+debug: 0.952
+device: 0.733
+socket: 0.595
+vnc: 0.590
+network: 0.575
+boot: 0.569
+PID: 0.546
+semantic: 0.215
+files: 0.177
+other: 0.122
+performance: 0.084
+KVM: 0.076
+permissions: 0.020
+graphic: 0.010
+
+[Qemu-devel] [BUG] virtio-net linux driver fails to probe on MIPS Malta since 'hw/virtio-pci: fix virtio behaviour'
+
+Hi,
+
+I've bisected the following failure of the virtio_net linux v4.10 driver
+to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
+
+virtio_net virtio0: virtio: device uses modern interface but does not have 
+VIRTIO_F_VERSION_1
+virtio_net: probe of virtio0 failed with error -22
+
+To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
+
+It appears that adding ",disable-modern=on,disable-legacy=off" to the
+virtio-net -device makes it work again.
+
+I presume this should really just work out of the box. Any ideas why it
+isn't?
+
+Cheers
+James
+signature.asc
+Description:
+Digital signature
+
+On 03/17/2017 11:57 PM, James Hogan wrote:
+Hi,
+
+I've bisected the following failure of the virtio_net linux v4.10 driver
+to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
+
+virtio_net virtio0: virtio: device uses modern interface but does not have 
+VIRTIO_F_VERSION_1
+virtio_net: probe of virtio0 failed with error -22
+
+To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
+
+It appears that adding ",disable-modern=on,disable-legacy=off" to the
+virtio-net -device makes it work again.
+
+I presume this should really just work out of the box. Any ideas why it
+isn't?
+Hi,
+
+
+This is strange. This commit changes virtio devices from legacy to virtio 
+"transitional".
+(your command line changes it to legacy)
+Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
+side
+there is nothing new.
+
+Michael, do you have any idea?
+
+Thanks,
+Marcel
+Cheers
+James
+
+On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
+>
+On 03/17/2017 11:57 PM, James Hogan wrote:
+>
+> Hi,
+>
+>
+>
+> I've bisected the following failure of the virtio_net linux v4.10 driver
+>
+> to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
+>
+>
+>
+> virtio_net virtio0: virtio: device uses modern interface but does not have
+>
+> VIRTIO_F_VERSION_1
+>
+> virtio_net: probe of virtio0 failed with error -22
+>
+>
+>
+> To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
+>
+>
+>
+> It appears that adding ",disable-modern=on,disable-legacy=off" to the
+>
+> virtio-net -device makes it work again.
+>
+>
+>
+> I presume this should really just work out of the box. Any ideas why it
+>
+> isn't?
+>
+>
+>
+>
+Hi,
+>
+>
+>
+This is strange. This commit changes virtio devices from legacy to virtio
+>
+"transitional".
+>
+(your command line changes it to legacy)
+>
+Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU
+>
+side
+>
+there is nothing new.
+>
+>
+Michael, do you have any idea?
+>
+>
+Thanks,
+>
+Marcel
+My guess would be firmware mishandling 64 bit BARs - we saw such
+a case on sparc previously. As a result you are probably reading
+all zeroes from features register or something like that.
+Marcel, could you send a patch making the bar 32 bit?
+If that helps we know what the issue is.
+
+>
+> Cheers
+>
+> James
+>
+>
+
+On 03/20/2017 05:43 PM, Michael S. Tsirkin wrote:
+On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
+On 03/17/2017 11:57 PM, James Hogan wrote:
+Hi,
+
+I've bisected the following failure of the virtio_net linux v4.10 driver
+to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
+
+virtio_net virtio0: virtio: device uses modern interface but does not have 
+VIRTIO_F_VERSION_1
+virtio_net: probe of virtio0 failed with error -22
+
+To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
+
+It appears that adding ",disable-modern=on,disable-legacy=off" to the
+virtio-net -device makes it work again.
+
+I presume this should really just work out of the box. Any ideas why it
+isn't?
+Hi,
+
+
+This is strange. This commit changes virtio devices from legacy to virtio 
+"transitional".
+(your command line changes it to legacy)
+Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
+side
+there is nothing new.
+
+Michael, do you have any idea?
+
+Thanks,
+Marcel
+My guess would be firmware mishandling 64 bit BARs - we saw such
+a case on sparc previously. As a result you are probably reading
+all zeroes from features register or something like that.
+Marcel, could you send a patch making the bar 32 bit?
+If that helps we know what the issue is.
+Sure,
+
+Thanks,
+Marcel
+Cheers
+James
+
+On 03/20/2017 05:43 PM, Michael S. Tsirkin wrote:
+On Mon, Mar 20, 2017 at 05:21:22PM +0200, Marcel Apfelbaum wrote:
+On 03/17/2017 11:57 PM, James Hogan wrote:
+Hi,
+
+I've bisected the following failure of the virtio_net linux v4.10 driver
+to probe in QEMU v2.9.0-rc1 emulating a MIPS Malta machine:
+
+virtio_net virtio0: virtio: device uses modern interface but does not have 
+VIRTIO_F_VERSION_1
+virtio_net: probe of virtio0 failed with error -22
+
+To QEMU commit 9a4c0e220d8a ("hw/virtio-pci: fix virtio behaviour").
+
+It appears that adding ",disable-modern=on,disable-legacy=off" to the
+virtio-net -device makes it work again.
+
+I presume this should really just work out of the box. Any ideas why it
+isn't?
+Hi,
+
+
+This is strange. This commit changes virtio devices from legacy to virtio 
+"transitional".
+(your command line changes it to legacy)
+Linux 4.10 supports virtio modern/transitional (as far as I know) and on QEMU 
+side
+there is nothing new.
+
+Michael, do you have any idea?
+
+Thanks,
+Marcel
+My guess would be firmware mishandling 64 bit BARs - we saw such
+a case on sparc previously. As a result you are probably reading
+all zeroes from features register or something like that.
+Marcel, could you send a patch making the bar 32 bit?
+If that helps we know what the issue is.
+Hi James,
+
+Can you please check if the below patch fixes the problem?
+Please note it is not a solution.
+
+diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
+index f9b7244..5b4d429 100644
+--- a/hw/virtio/virtio-pci.c
++++ b/hw/virtio/virtio-pci.c
+@@ -1671,9 +1671,7 @@ static void virtio_pci_device_plugged(DeviceState *d, 
+Error **errp)
+         }
+
+         pci_register_bar(&proxy->pci_dev, proxy->modern_mem_bar_idx,
+-                         PCI_BASE_ADDRESS_SPACE_MEMORY |
+-                         PCI_BASE_ADDRESS_MEM_PREFETCH |
+-                         PCI_BASE_ADDRESS_MEM_TYPE_64,
++                         PCI_BASE_ADDRESS_SPACE_MEMORY,
+                          &proxy->modern_bar);
+
+         proxy->config_cap = virtio_pci_add_mem_cap(proxy, &cfg.cap);
+
+
+Thanks,
+Marcel
+
+Hi Marcel,
+
+On Tue, Mar 21, 2017 at 04:16:58PM +0200, Marcel Apfelbaum wrote:
+>
+Can you please check if the below patch fixes the problem?
+>
+Please note it is not a solution.
+>
+>
+diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
+>
+index f9b7244..5b4d429 100644
+>
+--- a/hw/virtio/virtio-pci.c
+>
++++ b/hw/virtio/virtio-pci.c
+>
+@@ -1671,9 +1671,7 @@ static void virtio_pci_device_plugged(DeviceState *d,
+>
+Error **errp)
+>
+}
+>
+>
+pci_register_bar(&proxy->pci_dev, proxy->modern_mem_bar_idx,
+>
+-                         PCI_BASE_ADDRESS_SPACE_MEMORY |
+>
+-                         PCI_BASE_ADDRESS_MEM_PREFETCH |
+>
+-                         PCI_BASE_ADDRESS_MEM_TYPE_64,
+>
++                         PCI_BASE_ADDRESS_SPACE_MEMORY,
+>
+&proxy->modern_bar);
+>
+>
+proxy->config_cap = virtio_pci_add_mem_cap(proxy, &cfg.cap);
+Sorry for the delay trying this, I was away last week.
+
+No, it doesn't seem to make any difference.
+
+Thanks
+James
+signature.asc
+Description:
+Digital signature
+
diff --git a/results/classifier/zero-shot/010/review/12869209 b/results/classifier/zero-shot/010/review/12869209
new file mode 100644
index 00000000..5ce4d0fd
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/12869209
@@ -0,0 +1,112 @@
+other: 0.964
+device: 0.951
+files: 0.945
+permissions: 0.922
+performance: 0.906
+socket: 0.906
+PID: 0.894
+semantic: 0.891
+vnc: 0.885
+graphic: 0.879
+network: 0.858
+KVM: 0.857
+boot: 0.837
+debug: 0.813
+files: 0.207
+debug: 0.070
+device: 0.069
+PID: 0.043
+KVM: 0.020
+boot: 0.019
+other: 0.017
+semantic: 0.008
+network: 0.007
+performance: 0.004
+socket: 0.003
+vnc: 0.003
+graphic: 0.003
+permissions: 0.002
+
+[BUG FIX][PATCH v3 0/3] vhost-user-blk: fix bug on device disconnection during initialization
+
+This is a series fixing a bug in
+          host-user-blk.
+Is there any chance for it to be considered for the next rc?
+Thanks!
+Denis
+On 29.03.2021 16:44, Denis Plotnikov
+      wrote:
+ping!
+On 25.03.2021 18:12, Denis Plotnikov
+        wrote:
+v3:
+  * 0003: a new patch added fixing the problem on vm shutdown
+    I stumbled on this bug after v2 sending.
+  * 0001: gramma fixing (Raphael)
+  * 0002: commit message fixing (Raphael)
+
+v2:
+  * split the initial patch into two (Raphael)
+  * rename init to realized (Raphael)
+  * remove unrelated comment (Raphael)
+
+When the vhost-user-blk device lose the connection to the daemon during
+the initialization phase it kills qemu because of the assert in the code.
+The series fixes the bug.
+
+0001 is preparation for the fix
+0002 fixes the bug, patch description has the full motivation for the series
+0003 (added in v3) fix bug on vm shutdown
+
+Denis Plotnikov (3):
+  vhost-user-blk: use different event handlers on initialization
+  vhost-user-blk: perform immediate cleanup if disconnect on
+    initialization
+  vhost-user-blk: add immediate cleanup on shutdown
+
+ hw/block/vhost-user-blk.c | 79 ++++++++++++++++++++++++---------------
+ 1 file changed, 48 insertions(+), 31 deletions(-)
+
+On 01.04.2021 14:21, Denis Plotnikov wrote:
+This is a series fixing a bug in host-user-blk.
+More specifically, it's not just a bug but crasher.
+
+Valentine
+Is there any chance for it to be considered for the next rc?
+
+Thanks!
+
+Denis
+
+On 29.03.2021 16:44, Denis Plotnikov wrote:
+ping!
+
+On 25.03.2021 18:12, Denis Plotnikov wrote:
+v3:
+   * 0003: a new patch added fixing the problem on vm shutdown
+     I stumbled on this bug after v2 sending.
+   * 0001: gramma fixing (Raphael)
+   * 0002: commit message fixing (Raphael)
+
+v2:
+   * split the initial patch into two (Raphael)
+   * rename init to realized (Raphael)
+   * remove unrelated comment (Raphael)
+
+When the vhost-user-blk device lose the connection to the daemon during
+the initialization phase it kills qemu because of the assert in the code.
+The series fixes the bug.
+
+0001 is preparation for the fix
+0002 fixes the bug, patch description has the full motivation for the series
+0003 (added in v3) fix bug on vm shutdown
+
+Denis Plotnikov (3):
+   vhost-user-blk: use different event handlers on initialization
+   vhost-user-blk: perform immediate cleanup if disconnect on
+     initialization
+   vhost-user-blk: add immediate cleanup on shutdown
+
+  hw/block/vhost-user-blk.c | 79 ++++++++++++++++++++++++---------------
+  1 file changed, 48 insertions(+), 31 deletions(-)
+
diff --git a/results/classifier/zero-shot/010/review/13442371 b/results/classifier/zero-shot/010/review/13442371
new file mode 100644
index 00000000..d2f8a19a
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/13442371
@@ -0,0 +1,393 @@
+other: 0.886
+device: 0.883
+KVM: 0.872
+debug: 0.866
+vnc: 0.858
+permissions: 0.854
+graphic: 0.850
+semantic: 0.850
+PID: 0.849
+performance: 0.841
+files: 0.837
+socket: 0.831
+boot: 0.815
+network: 0.811
+debug: 0.821
+files: 0.109
+PID: 0.057
+other: 0.042
+boot: 0.032
+socket: 0.029
+device: 0.027
+vnc: 0.025
+semantic: 0.017
+network: 0.015
+performance: 0.005
+graphic: 0.003
+permissions: 0.003
+KVM: 0.001
+
+[Qemu-devel] [BUG] nanoMIPS support problem related to extract2 support for i386 TCG target
+
+Hello, Richard, Peter, and others.
+
+As a part of activities before 4.1 release, I tested nanoMIPS support
+in QEMU (which was officially fully integrated in 4.0, is currently
+limited to system mode only, and was tested in a similar fashion right
+prior to 4.0).
+
+This support appears to be broken now. Following command line works in
+4.0, but results in kernel panic for the current tip of the tree:
+
+~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
+-cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
+1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
+"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
+
+(kernel and rootfs image files used in this commend line can be
+downloaded from the locations mentioned in our user guide)
+
+The quick bisect points to the commit:
+
+commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
+Author: Richard Henderson <address@hidden>
+Date:   Mon Feb 25 11:42:35 2019 -0800
+
+    tcg/i386: Support INDEX_op_extract2_{i32,i64}
+
+    Signed-off-by: Richard Henderson <address@hidden>
+
+Please advise on further actions.
+
+Yours,
+Aleksandar
+
+On Fri, Jul 12, 2019 at 8:09 PM Aleksandar Markovic
+<address@hidden> wrote:
+>
+>
+Hello, Richard, Peter, and others.
+>
+>
+As a part of activities before 4.1 release, I tested nanoMIPS support
+>
+in QEMU (which was officially fully integrated in 4.0, is currently
+>
+limited to system mode only, and was tested in a similar fashion right
+>
+prior to 4.0).
+>
+>
+This support appears to be broken now. Following command line works in
+>
+4.0, but results in kernel panic for the current tip of the tree:
+>
+>
+~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
+>
+-cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
+>
+1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
+>
+"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
+>
+>
+(kernel and rootfs image files used in this commend line can be
+>
+downloaded from the locations mentioned in our user guide)
+>
+>
+The quick bisect points to the commit:
+>
+>
+commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
+>
+Author: Richard Henderson <address@hidden>
+>
+Date:   Mon Feb 25 11:42:35 2019 -0800
+>
+>
+tcg/i386: Support INDEX_op_extract2_{i32,i64}
+>
+>
+Signed-off-by: Richard Henderson <address@hidden>
+>
+>
+Please advise on further actions.
+>
+Just to add a data point:
+
+If the following change is applied:
+
+diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
+index 928e8b8..b6a4cf2 100644
+--- a/tcg/i386/tcg-target.h
++++ b/tcg/i386/tcg-target.h
+@@ -124,7 +124,7 @@ extern bool have_avx2;
+ #define TCG_TARGET_HAS_deposit_i32      1
+ #define TCG_TARGET_HAS_extract_i32      1
+ #define TCG_TARGET_HAS_sextract_i32     1
+-#define TCG_TARGET_HAS_extract2_i32     1
++#define TCG_TARGET_HAS_extract2_i32     0
+ #define TCG_TARGET_HAS_movcond_i32      1
+ #define TCG_TARGET_HAS_add2_i32         1
+ #define TCG_TARGET_HAS_sub2_i32         1
+@@ -163,7 +163,7 @@ extern bool have_avx2;
+ #define TCG_TARGET_HAS_deposit_i64      1
+ #define TCG_TARGET_HAS_extract_i64      1
+ #define TCG_TARGET_HAS_sextract_i64     0
+-#define TCG_TARGET_HAS_extract2_i64     1
++#define TCG_TARGET_HAS_extract2_i64     0
+ #define TCG_TARGET_HAS_movcond_i64      1
+ #define TCG_TARGET_HAS_add2_i64         1
+ #define TCG_TARGET_HAS_sub2_i64         1
+
+... the problem disappears.
+
+
+>
+Yours,
+>
+Aleksandar
+
+On Fri, Jul 12, 2019 at 8:19 PM Aleksandar Markovic
+<address@hidden> wrote:
+>
+>
+On Fri, Jul 12, 2019 at 8:09 PM Aleksandar Markovic
+>
+<address@hidden> wrote:
+>
+>
+>
+> Hello, Richard, Peter, and others.
+>
+>
+>
+> As a part of activities before 4.1 release, I tested nanoMIPS support
+>
+> in QEMU (which was officially fully integrated in 4.0, is currently
+>
+> limited to system mode only, and was tested in a similar fashion right
+>
+> prior to 4.0).
+>
+>
+>
+> This support appears to be broken now. Following command line works in
+>
+> 4.0, but results in kernel panic for the current tip of the tree:
+>
+>
+>
+> ~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
+>
+> -cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
+>
+> 1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
+>
+> "mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
+>
+>
+>
+> (kernel and rootfs image files used in this commend line can be
+>
+> downloaded from the locations mentioned in our user guide)
+>
+>
+>
+> The quick bisect points to the commit:
+>
+>
+>
+> commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
+>
+> Author: Richard Henderson <address@hidden>
+>
+> Date:   Mon Feb 25 11:42:35 2019 -0800
+>
+>
+>
+>     tcg/i386: Support INDEX_op_extract2_{i32,i64}
+>
+>
+>
+>     Signed-off-by: Richard Henderson <address@hidden>
+>
+>
+>
+> Please advise on further actions.
+>
+>
+>
+>
+Just to add a data point:
+>
+>
+If the following change is applied:
+>
+>
+diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
+>
+index 928e8b8..b6a4cf2 100644
+>
+--- a/tcg/i386/tcg-target.h
+>
++++ b/tcg/i386/tcg-target.h
+>
+@@ -124,7 +124,7 @@ extern bool have_avx2;
+>
+#define TCG_TARGET_HAS_deposit_i32      1
+>
+#define TCG_TARGET_HAS_extract_i32      1
+>
+#define TCG_TARGET_HAS_sextract_i32     1
+>
+-#define TCG_TARGET_HAS_extract2_i32     1
+>
++#define TCG_TARGET_HAS_extract2_i32     0
+>
+#define TCG_TARGET_HAS_movcond_i32      1
+>
+#define TCG_TARGET_HAS_add2_i32         1
+>
+#define TCG_TARGET_HAS_sub2_i32         1
+>
+@@ -163,7 +163,7 @@ extern bool have_avx2;
+>
+#define TCG_TARGET_HAS_deposit_i64      1
+>
+#define TCG_TARGET_HAS_extract_i64      1
+>
+#define TCG_TARGET_HAS_sextract_i64     0
+>
+-#define TCG_TARGET_HAS_extract2_i64     1
+>
++#define TCG_TARGET_HAS_extract2_i64     0
+>
+#define TCG_TARGET_HAS_movcond_i64      1
+>
+#define TCG_TARGET_HAS_add2_i64         1
+>
+#define TCG_TARGET_HAS_sub2_i64         1
+>
+>
+... the problem disappears.
+>
+It looks the problem is in this code segment in of tcg_gen_deposit_i32():
+
+        if (ofs == 0) {
+            tcg_gen_extract2_i32(ret, arg1, arg2, len);
+            tcg_gen_rotli_i32(ret, ret, len);
+            goto done;
+        }
+
+)
+
+If that code segment is deleted altogether (which effectively forces
+usage of "fallback" part of tcg_gen_deposit_i32()), the problem also
+vanishes (without changes from my previous mail).
+
+>
+>
+> Yours,
+>
+> Aleksandar
+
+Aleksandar Markovic <address@hidden> writes:
+
+>
+Hello, Richard, Peter, and others.
+>
+>
+As a part of activities before 4.1 release, I tested nanoMIPS support
+>
+in QEMU (which was officially fully integrated in 4.0, is currently
+>
+limited to system mode only, and was tested in a similar fashion right
+>
+prior to 4.0).
+>
+>
+This support appears to be broken now. Following command line works in
+>
+4.0, but results in kernel panic for the current tip of the tree:
+>
+>
+~/Build/qemu-test-revert-c6fb8c0cf704/mipsel-softmmu/qemu-system-mipsel
+>
+-cpu I7200 -kernel generic_nano32r6el_page4k -M malta -serial stdio -m
+>
+1G -hda nanomips32r6_le_sf_2017.05-03-59-gf5595d6.ext4 -append
+>
+"mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
+>
+>
+(kernel and rootfs image files used in this commend line can be
+>
+downloaded from the locations mentioned in our user guide)
+>
+>
+The quick bisect points to the commit:
+>
+>
+commit c6fb8c0cf704c4a1a48c3e99e995ad4c58150dab
+>
+Author: Richard Henderson <address@hidden>
+>
+Date:   Mon Feb 25 11:42:35 2019 -0800
+>
+>
+tcg/i386: Support INDEX_op_extract2_{i32,i64}
+>
+>
+Signed-off-by: Richard Henderson <address@hidden>
+>
+>
+Please advise on further actions.
+Please see the fix:
+
+  Subject: [PATCH for-4.1] tcg: Fix constant folding of INDEX_op_extract2_i32
+  Date: Tue,  9 Jul 2019 14:19:00 +0200
+  Message-Id: <address@hidden>
+
+>
+>
+Yours,
+>
+Aleksandar
+--
+Alex Bennée
+
+On Sat, Jul 13, 2019 at 9:21 AM Alex Bennée <address@hidden> wrote:
+>
+>
+Please see the fix:
+>
+>
+Subject: [PATCH for-4.1] tcg: Fix constant folding of INDEX_op_extract2_i32
+>
+Date: Tue,  9 Jul 2019 14:19:00 +0200
+>
+Message-Id: <address@hidden>
+>
+Thanks, this fixed the behavior.
+
+Sincerely,
+Aleksandar
+
+>
+>
+>
+>
+> Yours,
+>
+> Aleksandar
+>
+>
+>
+--
+>
+Alex Bennée
+>
+
diff --git a/results/classifier/zero-shot/010/review/14488057 b/results/classifier/zero-shot/010/review/14488057
new file mode 100644
index 00000000..15a59db1
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/14488057
@@ -0,0 +1,735 @@
+permissions: 0.940
+PID: 0.930
+device: 0.929
+debug: 0.925
+other: 0.922
+performance: 0.911
+semantic: 0.905
+boot: 0.892
+graphic: 0.887
+vnc: 0.882
+KVM: 0.880
+network: 0.846
+socket: 0.825
+files: 0.823
+permissions: 0.093
+files: 0.048
+debug: 0.029
+PID: 0.016
+other: 0.011
+semantic: 0.006
+network: 0.005
+device: 0.003
+performance: 0.003
+graphic: 0.002
+boot: 0.002
+socket: 0.002
+vnc: 0.001
+KVM: 0.000
+
+[Qemu-devel] [BUG] user-to-root privesc inside VM via bad translation caching
+
+This is an issue in QEMU's system emulation for X86 in TCG mode.
+The issue permits an attacker who can execute code in guest ring 3
+with normal user privileges to inject code into other processes that
+are running in guest ring 3, in particular root-owned processes.
+
+== reproduction steps ==
+
+ - Create an x86-64 VM and install Debian Jessie in it. The following
+   steps should all be executed inside the VM.
+ - Verify that procmail is installed and the correct version:
+       address@hidden:~# apt-cache show procmail | egrep 'Version|SHA'
+       Version: 3.22-24
+       SHA1: 54ed2d51db0e76f027f06068ab5371048c13434c
+       SHA256: 4488cf6975af9134a9b5238d5d70e8be277f70caa45a840dfbefd2dc444bfe7f
+ - Install build-essential and nasm ("apt install build-essential nasm").
+ - Unpack the exploit, compile it and run it:
+       address@hidden:~$ tar xvf procmail_cache_attack.tar
+       procmail_cache_attack/
+       procmail_cache_attack/shellcode.asm
+       procmail_cache_attack/xp.c
+       procmail_cache_attack/compile.sh
+       procmail_cache_attack/attack.c
+       address@hidden:~$ cd procmail_cache_attack
+       address@hidden:~/procmail_cache_attack$ ./compile.sh
+       address@hidden:~/procmail_cache_attack$ ./attack
+       memory mappings set up
+       child is dead, codegen should be complete
+       executing code as root! :)
+       address@hidden:~/procmail_cache_attack# id
+       uid=0(root) gid=0(root) groups=0(root),[...]
+
+Note: While the exploit depends on the precise version of procmail,
+the actual vulnerability is in QEMU, not in procmail. procmail merely
+serves as a seldomly-executed setuid root binary into which code can
+be injected.
+
+
+== detailed issue description ==
+QEMU caches translated basic blocks. To look up a translated basic
+block, the function tb_find() is used, which uses tb_htable_lookup()
+in its slowpath, which in turn compares translated basic blocks
+(TranslationBlock) to the lookup information (struct tb_desc) using
+tb_cmp().
+
+tb_cmp() attempts to ensure (among other things) that both the virtual
+start address of the basic block and the physical addresses that the
+basic block covers match. When checking the physical addresses, it
+assumes that a basic block can span at most two pages.
+
+gen_intermediate_code() attempts to enforce this by stopping the
+translation of a basic block if nearly one page of instructions has
+been translated already:
+
+    /* if too long translation, stop generation too */
+    if (tcg_op_buf_full() ||
+        (pc_ptr - pc_start) >= (TARGET_PAGE_SIZE - 32) ||
+        num_insns >= max_insns) {
+        gen_jmp_im(pc_ptr - dc->cs_base);
+        gen_eob(dc);
+        break;
+    }
+
+However, while real X86 processors have a maximum instruction length
+of 15 bytes, QEMU's instruction decoder for X86 does not place any
+limit on the instruction length or the number of instruction prefixes.
+Therefore, it is possible to create an arbitrarily long instruction
+by e.g. prepending an arbitrary number of LOCK prefixes to a normal
+instruction. This permits creating a basic block that spans three
+pages by simply appending an approximately page-sized instruction to
+the end of a normal basic block that starts close to the end of a
+page.
+
+Such an overlong basic block causes the basic block caching to fail as
+follows: If code is generated and cached for a basic block that spans
+the physical pages (A,E,B), this basic block will be returned by
+lookups in a process in which the physical pages (A,B,C) are mapped
+in the same virtual address range (assuming that all other lookup
+parameters match).
+
+This behavior can be abused by an attacker e.g. as follows: If a
+non-relocatable world-readable setuid executable legitimately contains
+the pages (A,B,C), an attacker can map (A,E,B) into his own process,
+at the normal load address of A, where E is an attacker-controlled
+page. If a legitimate basic block spans the pages A and B, an attacker
+can write arbitrary non-branch instructions at the start of E, then
+append an overlong instruction
+that ends behind the start of C, yielding a modified basic block that
+spans all three pages. If the attacker then executes the modified
+basic block in his process, the modified basic block is cached.
+Next, the attacker can execute the setuid binary, which will reuse the
+cached modified basic block, executing attacker-controlled
+instructions in the context of the privileged process.
+
+I am sending this to qemu-devel because a QEMU security contact
+told me that QEMU does not consider privilege escalation inside a
+TCG VM to be a security concern.
+procmail_cache_attack.tar
+Description:
+Unix tar archive
+
+On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
+>
+This is an issue in QEMU's system emulation for X86 in TCG mode.
+>
+The issue permits an attacker who can execute code in guest ring 3
+>
+with normal user privileges to inject code into other processes that
+>
+are running in guest ring 3, in particular root-owned processes.
+>
+I am sending this to qemu-devel because a QEMU security contact
+>
+told me that QEMU does not consider privilege escalation inside a
+>
+TCG VM to be a security concern.
+Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
+
+We should really fix the crossing-a-page-boundary code for x86.
+I believe we do get it correct for ARM Thumb instructions.
+
+thanks
+-- PMM
+
+On Mon, Mar 20, 2017 at 10:46 AM, Peter Maydell wrote:
+>
+On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
+>
+> This is an issue in QEMU's system emulation for X86 in TCG mode.
+>
+> The issue permits an attacker who can execute code in guest ring 3
+>
+> with normal user privileges to inject code into other processes that
+>
+> are running in guest ring 3, in particular root-owned processes.
+>
+>
+> I am sending this to qemu-devel because a QEMU security contact
+>
+> told me that QEMU does not consider privilege escalation inside a
+>
+> TCG VM to be a security concern.
+>
+>
+Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
+>
+>
+We should really fix the crossing-a-page-boundary code for x86.
+>
+I believe we do get it correct for ARM Thumb instructions.
+How about doing the instruction size check as follows?
+
+diff --git a/target/i386/translate.c b/target/i386/translate.c
+index 72c1b03a2a..94cf3da719 100644
+--- a/target/i386/translate.c
++++ b/target/i386/translate.c
+@@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
+*env, DisasContext *s,
+     default:
+         goto unknown_op;
+     }
++    if (s->pc - pc_start > 15) {
++        s->pc = pc_start;
++        goto illegal_op;
++    }
+     return s->pc;
+  illegal_op:
+     gen_illegal_opcode(s);
+
+Thanks,
+--
+Pranith
+
+On 22 March 2017 at 14:55, Pranith Kumar <address@hidden> wrote:
+>
+On Mon, Mar 20, 2017 at 10:46 AM, Peter Maydell wrote:
+>
+> On 20 March 2017 at 14:36, Jann Horn <address@hidden> wrote:
+>
+>> This is an issue in QEMU's system emulation for X86 in TCG mode.
+>
+>> The issue permits an attacker who can execute code in guest ring 3
+>
+>> with normal user privileges to inject code into other processes that
+>
+>> are running in guest ring 3, in particular root-owned processes.
+>
+>
+>
+>> I am sending this to qemu-devel because a QEMU security contact
+>
+>> told me that QEMU does not consider privilege escalation inside a
+>
+>> TCG VM to be a security concern.
+>
+>
+>
+> Correct; it's just a bug. Don't trust TCG QEMU as a security boundary.
+>
+>
+>
+> We should really fix the crossing-a-page-boundary code for x86.
+>
+> I believe we do get it correct for ARM Thumb instructions.
+>
+>
+How about doing the instruction size check as follows?
+>
+>
+diff --git a/target/i386/translate.c b/target/i386/translate.c
+>
+index 72c1b03a2a..94cf3da719 100644
+>
+--- a/target/i386/translate.c
+>
++++ b/target/i386/translate.c
+>
+@@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
+>
+*env, DisasContext *s,
+>
+default:
+>
+goto unknown_op;
+>
+}
+>
++    if (s->pc - pc_start > 15) {
+>
++        s->pc = pc_start;
+>
++        goto illegal_op;
+>
++    }
+>
+return s->pc;
+>
+illegal_op:
+>
+gen_illegal_opcode(s);
+This doesn't look right because it means we'll check
+only after we've emitted all the code to do the
+instruction operation, so the effect will be
+"execute instruction, then take illegal-opcode
+exception".
+
+We should check what the x86 architecture spec actually
+says and implement that.
+
+thanks
+-- PMM
+
+On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
+<address@hidden> wrote:
+>
+>
+>
+> How about doing the instruction size check as follows?
+>
+>
+>
+> diff --git a/target/i386/translate.c b/target/i386/translate.c
+>
+> index 72c1b03a2a..94cf3da719 100644
+>
+> --- a/target/i386/translate.c
+>
+> +++ b/target/i386/translate.c
+>
+> @@ -8235,6 +8235,10 @@ static target_ulong disas_insn(CPUX86State
+>
+> *env, DisasContext *s,
+>
+>      default:
+>
+>          goto unknown_op;
+>
+>      }
+>
+> +    if (s->pc - pc_start > 15) {
+>
+> +        s->pc = pc_start;
+>
+> +        goto illegal_op;
+>
+> +    }
+>
+>      return s->pc;
+>
+>   illegal_op:
+>
+>      gen_illegal_opcode(s);
+>
+>
+This doesn't look right because it means we'll check
+>
+only after we've emitted all the code to do the
+>
+instruction operation, so the effect will be
+>
+"execute instruction, then take illegal-opcode
+>
+exception".
+>
+The pc is restored to original address (s->pc = pc_start), so the
+exception will overwrite the generated illegal instruction and will be
+executed first.
+
+But yes, it's better to follow the architecture manual.
+
+Thanks,
+--
+Pranith
+
+On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
+>
+On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
+>
+<address@hidden> wrote:
+>
+> This doesn't look right because it means we'll check
+>
+> only after we've emitted all the code to do the
+>
+> instruction operation, so the effect will be
+>
+> "execute instruction, then take illegal-opcode
+>
+> exception".
+>
+The pc is restored to original address (s->pc = pc_start), so the
+>
+exception will overwrite the generated illegal instruction and will be
+>
+executed first.
+s->pc is the guest PC -- moving that backwards will
+not do anything about the generated TCG IR that's
+already been written. You'd need to rewind the
+write pointer in the IR stream, which there is
+no support for doing AFAIK.
+
+thanks
+-- PMM
+
+On Wed, Mar 22, 2017 at 11:21 AM, Peter Maydell
+<address@hidden> wrote:
+>
+On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
+>
+> On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
+>
+> <address@hidden> wrote:
+>
+>> This doesn't look right because it means we'll check
+>
+>> only after we've emitted all the code to do the
+>
+>> instruction operation, so the effect will be
+>
+>> "execute instruction, then take illegal-opcode
+>
+>> exception".
+>
+>
+> The pc is restored to original address (s->pc = pc_start), so the
+>
+> exception will overwrite the generated illegal instruction and will be
+>
+> executed first.
+>
+>
+s->pc is the guest PC -- moving that backwards will
+>
+not do anything about the generated TCG IR that's
+>
+already been written. You'd need to rewind the
+>
+write pointer in the IR stream, which there is
+>
+no support for doing AFAIK.
+Ah, OK. Thanks for the explanation. May be we should check the size of
+the instruction while decoding the prefixes and error out once we
+exceed the limit. We would not generate any IR code.
+
+--
+Pranith
+
+On 03/23/2017 02:29 AM, Pranith Kumar wrote:
+On Wed, Mar 22, 2017 at 11:21 AM, Peter Maydell
+<address@hidden> wrote:
+On 22 March 2017 at 15:14, Pranith Kumar <address@hidden> wrote:
+On Wed, Mar 22, 2017 at 11:04 AM, Peter Maydell
+<address@hidden> wrote:
+This doesn't look right because it means we'll check
+only after we've emitted all the code to do the
+instruction operation, so the effect will be
+"execute instruction, then take illegal-opcode
+exception".
+The pc is restored to original address (s->pc = pc_start), so the
+exception will overwrite the generated illegal instruction and will be
+executed first.
+s->pc is the guest PC -- moving that backwards will
+not do anything about the generated TCG IR that's
+already been written. You'd need to rewind the
+write pointer in the IR stream, which there is
+no support for doing AFAIK.
+Ah, OK. Thanks for the explanation. May be we should check the size of
+the instruction while decoding the prefixes and error out once we
+exceed the limit. We would not generate any IR code.
+Yes.
+It would not enforce a true limit of 15 bytes, since you can't know that until
+you've done the rest of the decode.  But you'd be able to say that no more than
+14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25 bytes is used.
+Which does fix the bug.
+
+
+r~
+
+On 22/03/2017 21:01, Richard Henderson wrote:
+>
+>
+>
+> Ah, OK. Thanks for the explanation. May be we should check the size of
+>
+> the instruction while decoding the prefixes and error out once we
+>
+> exceed the limit. We would not generate any IR code.
+>
+>
+Yes.
+>
+>
+It would not enforce a true limit of 15 bytes, since you can't know that
+>
+until you've done the rest of the decode.  But you'd be able to say that
+>
+no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
+>
+bytes is used.
+>
+>
+Which does fix the bug.
+Yeah, that would work for 2.9 if somebody wants to put together a patch.
+ Ensuring that all instruction fetching happens before translation side
+effects is a little harder, but perhaps it's also the opportunity to get
+rid of s->rip_offset which is a little ugly.
+
+Paolo
+
+On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
+>
+>
+>
+On 22/03/2017 21:01, Richard Henderson wrote:
+>
+>>
+>
+>> Ah, OK. Thanks for the explanation. May be we should check the size of
+>
+>> the instruction while decoding the prefixes and error out once we
+>
+>> exceed the limit. We would not generate any IR code.
+>
+>
+>
+> Yes.
+>
+>
+>
+> It would not enforce a true limit of 15 bytes, since you can't know that
+>
+> until you've done the rest of the decode.  But you'd be able to say that
+>
+> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
+>
+> bytes is used.
+>
+>
+>
+> Which does fix the bug.
+>
+>
+Yeah, that would work for 2.9 if somebody wants to put together a patch.
+>
+Ensuring that all instruction fetching happens before translation side
+>
+effects is a little harder, but perhaps it's also the opportunity to get
+>
+rid of s->rip_offset which is a little ugly.
+How about the following?
+
+diff --git a/target/i386/translate.c b/target/i386/translate.c
+index 72c1b03a2a..67c58b8900 100644
+--- a/target/i386/translate.c
++++ b/target/i386/translate.c
+@@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
+*env, DisasContext *s,
+     s->vex_l = 0;
+     s->vex_v = 0;
+  next_byte:
++    /* The prefixes can atmost be 14 bytes since x86 has an upper
++       limit of 15 bytes for the instruction */
++    if (s->pc - pc_start > 14) {
++        goto illegal_op;
++    }
+     b = cpu_ldub_code(env, s->pc);
+     s->pc++;
+     /* Collect prefixes.  */
+
+--
+Pranith
+
+On 23/03/2017 17:50, Pranith Kumar wrote:
+>
+On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
+>
+>
+>
+>
+>
+> On 22/03/2017 21:01, Richard Henderson wrote:
+>
+>>>
+>
+>>> Ah, OK. Thanks for the explanation. May be we should check the size of
+>
+>>> the instruction while decoding the prefixes and error out once we
+>
+>>> exceed the limit. We would not generate any IR code.
+>
+>>
+>
+>> Yes.
+>
+>>
+>
+>> It would not enforce a true limit of 15 bytes, since you can't know that
+>
+>> until you've done the rest of the decode.  But you'd be able to say that
+>
+>> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
+>
+>> bytes is used.
+>
+>>
+>
+>> Which does fix the bug.
+>
+>
+>
+> Yeah, that would work for 2.9 if somebody wants to put together a patch.
+>
+>  Ensuring that all instruction fetching happens before translation side
+>
+> effects is a little harder, but perhaps it's also the opportunity to get
+>
+> rid of s->rip_offset which is a little ugly.
+>
+>
+How about the following?
+>
+>
+diff --git a/target/i386/translate.c b/target/i386/translate.c
+>
+index 72c1b03a2a..67c58b8900 100644
+>
+--- a/target/i386/translate.c
+>
++++ b/target/i386/translate.c
+>
+@@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
+>
+*env, DisasContext *s,
+>
+s->vex_l = 0;
+>
+s->vex_v = 0;
+>
+next_byte:
+>
++    /* The prefixes can atmost be 14 bytes since x86 has an upper
+>
++       limit of 15 bytes for the instruction */
+>
++    if (s->pc - pc_start > 14) {
+>
++        goto illegal_op;
+>
++    }
+>
+b = cpu_ldub_code(env, s->pc);
+>
+s->pc++;
+>
+/* Collect prefixes.  */
+Please make the comment more verbose, based on Richard's remark.  We
+should apply it to 2.9.
+
+Also, QEMU usually formats comments with stars on every line.
+
+Paolo
+
+On Thu, Mar 23, 2017 at 1:37 PM, Paolo Bonzini <address@hidden> wrote:
+>
+>
+>
+On 23/03/2017 17:50, Pranith Kumar wrote:
+>
+> On Thu, Mar 23, 2017 at 6:27 AM, Paolo Bonzini <address@hidden> wrote:
+>
+>>
+>
+>>
+>
+>> On 22/03/2017 21:01, Richard Henderson wrote:
+>
+>>>>
+>
+>>>> Ah, OK. Thanks for the explanation. May be we should check the size of
+>
+>>>> the instruction while decoding the prefixes and error out once we
+>
+>>>> exceed the limit. We would not generate any IR code.
+>
+>>>
+>
+>>> Yes.
+>
+>>>
+>
+>>> It would not enforce a true limit of 15 bytes, since you can't know that
+>
+>>> until you've done the rest of the decode.  But you'd be able to say that
+>
+>>> no more than 14 prefix + 1 opc + 6 modrm+sib+ofs + 4 immediate = 25
+>
+>>> bytes is used.
+>
+>>>
+>
+>>> Which does fix the bug.
+>
+>>
+>
+>> Yeah, that would work for 2.9 if somebody wants to put together a patch.
+>
+>>  Ensuring that all instruction fetching happens before translation side
+>
+>> effects is a little harder, but perhaps it's also the opportunity to get
+>
+>> rid of s->rip_offset which is a little ugly.
+>
+>
+>
+> How about the following?
+>
+>
+>
+> diff --git a/target/i386/translate.c b/target/i386/translate.c
+>
+> index 72c1b03a2a..67c58b8900 100644
+>
+> --- a/target/i386/translate.c
+>
+> +++ b/target/i386/translate.c
+>
+> @@ -4418,6 +4418,11 @@ static target_ulong disas_insn(CPUX86State
+>
+> *env, DisasContext *s,
+>
+>      s->vex_l = 0;
+>
+>      s->vex_v = 0;
+>
+>   next_byte:
+>
+> +    /* The prefixes can atmost be 14 bytes since x86 has an upper
+>
+> +       limit of 15 bytes for the instruction */
+>
+> +    if (s->pc - pc_start > 14) {
+>
+> +        goto illegal_op;
+>
+> +    }
+>
+>      b = cpu_ldub_code(env, s->pc);
+>
+>      s->pc++;
+>
+>      /* Collect prefixes.  */
+>
+>
+Please make the comment more verbose, based on Richard's remark.  We
+>
+should apply it to 2.9.
+>
+>
+Also, QEMU usually formats comments with stars on every line.
+OK. I'll send a proper patch with updated comment.
+
+Thanks,
+--
+Pranith
+
diff --git a/results/classifier/zero-shot/010/review/14887122 b/results/classifier/zero-shot/010/review/14887122
new file mode 100644
index 00000000..9575085c
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/14887122
@@ -0,0 +1,282 @@
+permissions: 0.964
+files: 0.944
+debug: 0.934
+semantic: 0.928
+device: 0.919
+PID: 0.914
+socket: 0.914
+graphic: 0.910
+performance: 0.897
+other: 0.890
+vnc: 0.871
+network: 0.855
+boot: 0.831
+KVM: 0.814
+debug: 0.505
+files: 0.098
+network: 0.074
+permissions: 0.071
+socket: 0.059
+other: 0.027
+KVM: 0.023
+PID: 0.016
+device: 0.008
+semantic: 0.007
+vnc: 0.006
+performance: 0.005
+boot: 0.003
+graphic: 0.002
+
+[BUG][RFC] CPR transfer Issues: Socket permissions and PID files
+
+Hello,
+
+While testing CPR transfer I encountered two issues. The first is that the 
+transfer fails when running with pidfiles due to the destination qemu process 
+attempting to create the pidfile while it is still locked by the source 
+process. The second is that the transfer fails when running with the -run-with 
+user=$USERID parameter. This is because the destination qemu process creates 
+the UNIX sockets used for the CPR transfer before dropping to the lower 
+permissioned user, which causes them to be owned by the original user. The 
+source qemu process then does not have permission to connect to it because it 
+is already running as the lesser permissioned user.
+
+Reproducing the first issue:
+
+Create a source and destination qemu instance associated with the same VM where 
+both processes have the -pidfile parameter passed on the command line. You 
+should see the following error on the command line of the second process:
+
+qemu-system-x86_64: cannot create PID file: Cannot lock pid file: Resource 
+temporarily unavailable
+
+Reproducing the second issue:
+
+Create a source and destination qemu instance associated with the same VM where 
+both processes have -run-with user=$USERID passed on the command line, where 
+$USERID is a different user from the one launching the processes. Then attempt 
+a CPR transfer using UNIX sockets for the main and cpr sockets. You should 
+receive the following error via QMP:
+{"error": {"class": "GenericError", "desc": "Failed to connect to 'cpr.sock': 
+Permission denied"}}
+
+I provided a minimal patch that works around the second issue.
+
+Thank you,
+Ben Chaney
+
+---
+include/system/os-posix.h | 4 ++++
+os-posix.c | 8 --------
+util/qemu-sockets.c | 21 +++++++++++++++++++++
+3 files changed, 25 insertions(+), 8 deletions(-)
+
+diff --git a/include/system/os-posix.h b/include/system/os-posix.h
+index ce5b3bccf8..2a414a914a 100644
+--- a/include/system/os-posix.h
++++ b/include/system/os-posix.h
+@@ -55,6 +55,10 @@ void os_setup_limits(void);
+void os_setup_post(void);
+int os_mlock(bool on_fault);
+
++extern struct passwd *user_pwd;
++extern uid_t user_uid;
++extern gid_t user_gid;
++
+/**
+* qemu_alloc_stack:
+* @sz: pointer to a size_t holding the requested usable stack size
+diff --git a/os-posix.c b/os-posix.c
+index 52925c23d3..9369b312a0 100644
+--- a/os-posix.c
++++ b/os-posix.c
+@@ -86,14 +86,6 @@ void os_set_proc_name(const char *s)
+}
+
+
+-/*
+- * Must set all three of these at once.
+- * Legal combinations are unset by name by uid
+- */
+-static struct passwd *user_pwd; /* NULL non-NULL NULL */
+-static uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
+-static gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
+-
+/*
+* Prepare to change user ID. user_id can be one of 3 forms:
+* - a username, in which case user ID will be changed to its uid,
+diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
+index 77477c1cd5..987977ead9 100644
+--- a/util/qemu-sockets.c
++++ b/util/qemu-sockets.c
+@@ -871,6 +871,14 @@ static bool saddr_is_tight(UnixSocketAddress *saddr)
+#endif
+}
+
++/*
++ * Must set all three of these at once.
++ * Legal combinations are unset by name by uid
++ */
++struct passwd *user_pwd; /* NULL non-NULL NULL */
++uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
++gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
++
+static int unix_listen_saddr(UnixSocketAddress *saddr,
+int num,
+Error **errp)
+@@ -947,6 +955,19 @@ static int unix_listen_saddr(UnixSocketAddress *saddr,
+error_setg_errno(errp, errno, "Failed to bind socket to %s", path);
+goto err;
+}
++ if (user_pwd) {
++ if (chown(un.sun_path, user_pwd->pw_uid, user_pwd->pw_gid) < 0) {
++ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
+path);
++ goto err;
++ }
++ }
++ else if (user_uid != -1 && user_gid != -1) {
++ if (chown(un.sun_path, user_uid, user_gid) < 0) {
++ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
+path);
++ goto err;
++ }
++ }
++
+if (listen(sock, num) < 0) {
+error_setg_errno(errp, errno, "Failed to listen on socket");
+goto err;
+--
+2.40.1
+
+Thank you Ben.  I appreciate you testing CPR and shaking out the bugs.
+I will study these and propose patches.
+
+My initial reaction to the pidfile issue is that the orchestration layer must
+pass a different filename when starting the destination qemu instance.  When
+using live update without containers, these types of resource conflicts in the
+global namespaces are a known issue.
+
+- Steve
+
+On 3/14/2025 2:33 PM, Chaney, Ben wrote:
+Hello,
+
+While testing CPR transfer I encountered two issues. The first is that the 
+transfer fails when running with pidfiles due to the destination qemu process 
+attempting to create the pidfile while it is still locked by the source 
+process. The second is that the transfer fails when running with the -run-with 
+user=$USERID parameter. This is because the destination qemu process creates 
+the UNIX sockets used for the CPR transfer before dropping to the lower 
+permissioned user, which causes them to be owned by the original user. The 
+source qemu process then does not have permission to connect to it because it 
+is already running as the lesser permissioned user.
+
+Reproducing the first issue:
+
+Create a source and destination qemu instance associated with the same VM where 
+both processes have the -pidfile parameter passed on the command line. You 
+should see the following error on the command line of the second process:
+
+qemu-system-x86_64: cannot create PID file: Cannot lock pid file: Resource 
+temporarily unavailable
+
+Reproducing the second issue:
+
+Create a source and destination qemu instance associated with the same VM where 
+both processes have -run-with user=$USERID passed on the command line, where 
+$USERID is a different user from the one launching the processes. Then attempt 
+a CPR transfer using UNIX sockets for the main and cpr sockets. You should 
+receive the following error via QMP:
+{"error": {"class": "GenericError", "desc": "Failed to connect to 'cpr.sock': 
+Permission denied"}}
+
+I provided a minimal patch that works around the second issue.
+
+Thank you,
+Ben Chaney
+
+---
+include/system/os-posix.h | 4 ++++
+os-posix.c | 8 --------
+util/qemu-sockets.c | 21 +++++++++++++++++++++
+3 files changed, 25 insertions(+), 8 deletions(-)
+
+diff --git a/include/system/os-posix.h b/include/system/os-posix.h
+index ce5b3bccf8..2a414a914a 100644
+--- a/include/system/os-posix.h
++++ b/include/system/os-posix.h
+@@ -55,6 +55,10 @@ void os_setup_limits(void);
+void os_setup_post(void);
+int os_mlock(bool on_fault);
+
++extern struct passwd *user_pwd;
++extern uid_t user_uid;
++extern gid_t user_gid;
++
+/**
+* qemu_alloc_stack:
+* @sz: pointer to a size_t holding the requested usable stack size
+diff --git a/os-posix.c b/os-posix.c
+index 52925c23d3..9369b312a0 100644
+--- a/os-posix.c
++++ b/os-posix.c
+@@ -86,14 +86,6 @@ void os_set_proc_name(const char *s)
+}
+
+
+-/*
+- * Must set all three of these at once.
+- * Legal combinations are unset by name by uid
+- */
+-static struct passwd *user_pwd; /* NULL non-NULL NULL */
+-static uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
+-static gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
+-
+/*
+* Prepare to change user ID. user_id can be one of 3 forms:
+* - a username, in which case user ID will be changed to its uid,
+diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
+index 77477c1cd5..987977ead9 100644
+--- a/util/qemu-sockets.c
++++ b/util/qemu-sockets.c
+@@ -871,6 +871,14 @@ static bool saddr_is_tight(UnixSocketAddress *saddr)
+#endif
+}
+
++/*
++ * Must set all three of these at once.
++ * Legal combinations are unset by name by uid
++ */
++struct passwd *user_pwd; /* NULL non-NULL NULL */
++uid_t user_uid = (uid_t)-1; /* -1 -1 >=0 */
++gid_t user_gid = (gid_t)-1; /* -1 -1 >=0 */
++
+static int unix_listen_saddr(UnixSocketAddress *saddr,
+int num,
+Error **errp)
+@@ -947,6 +955,19 @@ static int unix_listen_saddr(UnixSocketAddress *saddr,
+error_setg_errno(errp, errno, "Failed to bind socket to %s", path);
+goto err;
+}
++ if (user_pwd) {
++ if (chown(un.sun_path, user_pwd->pw_uid, user_pwd->pw_gid) < 0) {
++ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
+path);
++ goto err;
++ }
++ }
++ else if (user_uid != -1 && user_gid != -1) {
++ if (chown(un.sun_path, user_uid, user_gid) < 0) {
++ error_setg_errno(errp, errno, "Failed to change permissions on socket %s", 
+path);
++ goto err;
++ }
++ }
++
+if (listen(sock, num) < 0) {
+error_setg_errno(errp, errno, "Failed to listen on socket");
+goto err;
+--
+2.40.1
+
diff --git a/results/classifier/zero-shot/010/review/16056596 b/results/classifier/zero-shot/010/review/16056596
new file mode 100644
index 00000000..fe50439e
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/16056596
@@ -0,0 +1,122 @@
+permissions: 0.985
+other: 0.980
+semantic: 0.979
+debug: 0.978
+files: 0.975
+device: 0.973
+boot: 0.971
+graphic: 0.970
+performance: 0.970
+PID: 0.961
+socket: 0.952
+vnc: 0.946
+network: 0.940
+KVM: 0.934
+boot: 0.952
+KVM: 0.879
+debug: 0.385
+PID: 0.058
+device: 0.033
+socket: 0.032
+files: 0.029
+performance: 0.007
+semantic: 0.006
+other: 0.005
+network: 0.003
+graphic: 0.002
+permissions: 0.001
+vnc: 0.001
+
+[BUG][powerpc] KVM Guest Boot Failure and Hang at "Booting Linux via __start()"
+
+Bug Description:
+Encountering a boot failure when launching a KVM guest with
+'qemu-system-ppc64'. The guest hangs at boot, and the QEMU monitor
+crashes.
+Reproduction Steps:
+# qemu-system-ppc64 --version
+QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
+Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
+# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
+pseries,accel=kvm \
+-m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
+  -device virtio-scsi-pci,id=scsi \
+-drive
+file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
+\
+-device scsi-hd,drive=drive0,bus=scsi.0 \
+  -netdev bridge,id=net0,br=virbr0 \
+  -device virtio-net-pci,netdev=net0 \
+  -serial pty \
+  -device virtio-balloon-pci \
+  -cpu host
+QEMU 9.2.50 monitor - type 'help' for more information
+char device redirected to /dev/pts/2 (label serial0)
+(qemu)
+(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
+unavailable: IRQ_XIVE capability must be present for KVM
+Falling back to kernel-irqchip=off
+** Qemu Hang
+
+(In another ssh session)
+# screen /dev/pts/2
+Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
+(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
+(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
+15:20:17 UTC 2024
+Detected machine type: 0000000000000101
+command line:
+BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
+root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
+Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
+Calling ibm,client-architecture-support... done
+memory layout at init:
+  memory_limit : 0000000000000000 (16 MB aligned)
+  alloc_bottom : 0000000008200000
+  alloc_top    : 0000000030000000
+  alloc_top_hi : 0000000800000000
+  rmo_top      : 0000000030000000
+  ram_top      : 0000000800000000
+instantiating rtas at 0x000000002fff0000... done
+prom_hold_cpus: skipped
+copying OF device tree...
+Building dt strings...
+Building dt structure...
+Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
+Device tree struct  0x0000000008220000 -> 0x0000000008230000
+Quiescing Open Firmware ...
+Booting Linux via __start() @ 0x0000000000440000 ...
+** Guest Console Hang
+
+
+Git Bisect:
+Performing git bisect points to the following patch:
+# git bisect bad
+e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
+commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
+Author: Nicholas Piggin <npiggin@gmail.com>
+Date:   Thu Dec 19 13:40:31 2024 +1000
+
+    target/ppc: fix timebase register reset state
+(H)DEC and PURR get reset before icount does, which causes them to
+be
+skewed and not match the init state. This can cause replay to not
+match the recorded trace exactly. For DEC and HDEC this is usually
+not
+noticable since they tend to get programmed before affecting the
+    target machine. PURR has been observed to cause replay bugs when
+    running Linux.
+
+    Fix this by resetting using a time of 0.
+
+    Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
+    Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
+
+ hw/ppc/ppc.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+
+Reverting the patch helps boot the guest.
+Thanks,
+Misbah Anjum N
+
diff --git a/results/classifier/zero-shot/010/review/16201167 b/results/classifier/zero-shot/010/review/16201167
new file mode 100644
index 00000000..6d0e32d9
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/16201167
@@ -0,0 +1,124 @@
+other: 0.954
+vnc: 0.946
+permissions: 0.939
+graphic: 0.937
+debug: 0.935
+semantic: 0.933
+KVM: 0.928
+performance: 0.927
+device: 0.911
+files: 0.900
+PID: 0.899
+socket: 0.892
+network: 0.864
+boot: 0.845
+KVM: 0.915
+debug: 0.653
+performance: 0.135
+PID: 0.107
+files: 0.093
+device: 0.025
+other: 0.022
+semantic: 0.009
+boot: 0.006
+network: 0.004
+socket: 0.003
+vnc: 0.003
+graphic: 0.003
+permissions: 0.001
+
+[BUG] Qemu abort with error "kvm_mem_ioeventfd_add: error adding ioeventfd: File exists (17)"
+
+Hi list,
+
+When I did some tests in my virtual domain with live-attached virtio deivces, I 
+got a coredump file of Qemu.
+
+The error print from qemu is "kvm_mem_ioeventfd_add: error adding ioeventfd: 
+File exists (17)".
+And the call trace in the coredump file displays as below:
+#0  0x0000ffff89acecc8 in ?? () from /usr/lib64/libc.so.6
+#1  0x0000ffff89a8acbc in raise () from /usr/lib64/libc.so.6
+#2  0x0000ffff89a78d2c in abort () from /usr/lib64/libc.so.6
+#3  0x0000aaaabd7ccf1c in kvm_mem_ioeventfd_add (listener=<optimized out>, 
+section=<optimized out>, match_data=<optimized out>, data=<optimized out>, 
+e=<optimized out>) at ../accel/kvm/kvm-all.c:1607
+#4  0x0000aaaabd6e0304 in address_space_add_del_ioeventfds (fds_old_nb=164, 
+fds_old=0xffff5c80a1d0, fds_new_nb=160, fds_new=0xffff5c565080, 
+as=0xaaaabdfa8810 <address_space_memory>)
+    at ../softmmu/memory.c:795
+#5  address_space_update_ioeventfds (as=0xaaaabdfa8810 <address_space_memory>) 
+at ../softmmu/memory.c:856
+#6  0x0000aaaabd6e24d8 in memory_region_commit () at ../softmmu/memory.c:1113
+#7  0x0000aaaabd6e25c4 in memory_region_transaction_commit () at 
+../softmmu/memory.c:1144
+#8  0x0000aaaabd394eb4 in pci_bridge_update_mappings 
+(br=br@entry=0xaaaae755f7c0) at ../hw/pci/pci_bridge.c:248
+#9  0x0000aaaabd394f4c in pci_bridge_write_config (d=0xaaaae755f7c0, 
+address=44, val=<optimized out>, len=4) at ../hw/pci/pci_bridge.c:272
+#10 0x0000aaaabd39a928 in rp_write_config (d=0xaaaae755f7c0, address=44, 
+val=128, len=4) at ../hw/pci-bridge/pcie_root_port.c:39
+#11 0x0000aaaabd6df328 in memory_region_write_accessor (mr=0xaaaae63898d0, 
+addr=65580, value=<optimized out>, size=4, shift=<optimized out>, 
+mask=<optimized out>, attrs=...) at ../softmmu/memory.c:494
+#12 0x0000aaaabd6dcb6c in access_with_adjusted_size (addr=addr@entry=65580, 
+value=value@entry=0xffff817adc78, size=size@entry=4, access_size_min=<optimized 
+out>, access_size_max=<optimized out>,
+    access_fn=access_fn@entry=0xaaaabd6df284 <memory_region_write_accessor>, 
+mr=mr@entry=0xaaaae63898d0, attrs=attrs@entry=...) at ../softmmu/memory.c:556
+#13 0x0000aaaabd6e0dc8 in memory_region_dispatch_write 
+(mr=mr@entry=0xaaaae63898d0, addr=65580, data=<optimized out>, op=MO_32, 
+attrs=attrs@entry=...) at ../softmmu/memory.c:1534
+#14 0x0000aaaabd6d0574 in flatview_write_continue (fv=fv@entry=0xffff5c02da00, 
+addr=addr@entry=275146407980, attrs=attrs@entry=..., 
+ptr=ptr@entry=0xffff8aa8c028, len=len@entry=4,
+    addr1=<optimized out>, l=<optimized out>, mr=mr@entry=0xaaaae63898d0) at 
+/usr/src/debug/qemu-6.2.0-226.aarch64/include/qemu/host-utils.h:165
+#15 0x0000aaaabd6d4584 in flatview_write (len=4, buf=0xffff8aa8c028, attrs=..., 
+addr=275146407980, fv=0xffff5c02da00) at ../softmmu/physmem.c:3375
+#16 address_space_write (as=<optimized out>, addr=275146407980, attrs=..., 
+buf=buf@entry=0xffff8aa8c028, len=4) at ../softmmu/physmem.c:3467
+#17 0x0000aaaabd6d462c in address_space_rw (as=<optimized out>, addr=<optimized 
+out>, attrs=..., attrs@entry=..., buf=buf@entry=0xffff8aa8c028, len=<optimized 
+out>, is_write=<optimized out>)
+    at ../softmmu/physmem.c:3477
+#18 0x0000aaaabd7cf6e8 in kvm_cpu_exec (cpu=cpu@entry=0xaaaae625dfd0) at 
+../accel/kvm/kvm-all.c:2970
+#19 0x0000aaaabd7d09bc in kvm_vcpu_thread_fn (arg=arg@entry=0xaaaae625dfd0) at 
+../accel/kvm/kvm-accel-ops.c:49
+#20 0x0000aaaabd94ccd8 in qemu_thread_start (args=<optimized out>) at 
+../util/qemu-thread-posix.c:559
+
+
+By printing more info in the coredump file, I found that the addr of 
+fds_old[146] and fds_new[146] are same, but fds_old[146] belonged to a 
+live-attached virtio-scsi device while fds_new[146] was owned by another 
+live-attached virtio-net.
+The reason why addr conflicted was then been found from vm's console log. Just 
+before qemu aborted, the guest kernel crashed and kdump.service booted the 
+dump-capture kernel where re-alloced address for the devices.
+Because those virtio devices were live-attached after vm creating, different 
+addr may been assigned to them in the dump-capture kernel:
+
+the initial kernel booting log:
+[    1.663297] pci 0000:00:02.1: BAR 14: assigned [mem 0x11900000-0x11afffff]
+[    1.664560] pci 0000:00:02.1: BAR 15: assigned [mem 
+0x8001800000-0x80019fffff 64bit pref]
+
+the dump-capture kernel booting log:
+[    1.845211] pci 0000:00:02.0: BAR 14: assigned [mem 0x11900000-0x11bfffff]
+[    1.846542] pci 0000:00:02.0: BAR 15: assigned [mem 
+0x8001800000-0x8001afffff 64bit pref]
+
+
+I think directly aborting the qemu process may not be the best choice in this 
+case cuz it will interrupt the work of kdump.service so that failed to generate 
+memory dump of the crashed guest kernel.
+Perhaps, IMO, the error could be simply ignored in this case and just let kdump 
+to reboot the system after memory-dump finishing, but I failed to find a 
+suitable judgment in the codes.
+
+Any solution for this problem? Hope I can get some helps here.
+
+Hao
+
diff --git a/results/classifier/zero-shot/010/review/16228234 b/results/classifier/zero-shot/010/review/16228234
new file mode 100644
index 00000000..033ebc25
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/16228234
@@ -0,0 +1,1868 @@
+other: 0.535
+KVM: 0.445
+network: 0.440
+permissions: 0.439
+device: 0.439
+vnc: 0.420
+semantic: 0.411
+performance: 0.409
+graphic: 0.408
+boot: 0.402
+socket: 0.401
+files: 0.394
+PID: 0.385
+debug: 0.384
+debug: 0.880
+files: 0.246
+network: 0.159
+PID: 0.075
+other: 0.035
+device: 0.033
+performance: 0.019
+KVM: 0.011
+semantic: 0.010
+socket: 0.007
+vnc: 0.003
+permissions: 0.002
+graphic: 0.002
+boot: 0.001
+
+[Qemu-devel] [Bug?] BQL about live migration
+
+Hello Juan & Dave,
+
+We hit a bug in our test:
+Network error occurs when migrating a guest, libvirt then rollback the
+migration, causes qemu coredump
+qemu log:
+2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+ {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": "STOP"}
+2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+ qmp_cmd_name: migrate_cancel
+2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+ {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": 
+"MIGRATION", "data": {"status": "cancelling"}}
+2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+ qmp_cmd_name: cont
+2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+ virtio-balloon device status is 7 that means DRIVER OK
+2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+ virtio-net device status is 7 that means DRIVER OK
+2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+ virtio-blk device status is 7 that means DRIVER OK
+2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+ virtio-serial device status is 7 that means DRIVER OK
+2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: 
+vm_state-notify:3ms
+2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+ {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": 
+"RESUME"}
+2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
+ this iteration cycle takes 3s, new dirtied data:0MB
+2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+ {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": 
+"MIGRATION_PASS", "data": {"pass": 3}}
+2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for 
+(131583/18446744073709551615)
+qemu-kvm: /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: 
+virtio_net_save: Assertion `!n->vhost_started' failed.
+2017-03-01 12:54:43.028: shutting down
+
+>
+From qemu log, qemu received and processed migrate_cancel/cont qmp commands
+after guest been stopped and entered the last round of migration. Then
+migration thread try to save device state when guest is running(started by
+cont command), causes assert and coredump.
+This is because in last iter, we call cpu_synchronize_all_states() to
+synchronize vcpu states, this call will release qemu_global_mutex and wait
+for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
+(gdb) bt
+#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from 
+/lib64/libpthread.so.0
+#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 <qemu_work_cond>, 
+mutex=0x7f764445eba0 <qemu_global_mutex>) at util/qemu-thread-posix.c:132
+#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413 
+<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at 
+/mnt/public/yanghy/qemu-kvm/cpus.c:995
+#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at 
+/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
+#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at 
+/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
+#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at 
+/mnt/public/yanghy/qemu-kvm/cpus.c:766
+#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy (f=0x7f76462f2d30, 
+iterable_only=false) at /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
+#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 
+<current_migration.37571>, current_active_state=4, 
+old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at 
+migration/migration.c:1753
+#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 
+<current_migration.37571>) at migration/migration.c:1922
+#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
+#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
+(gdb) p iothread_locked
+$1 = true
+
+and then, qemu main thread been executed, it won't block because migration
+thread released the qemu_global_mutex:
+(gdb) thr 1
+[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
+#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", 
+timeout);
+(gdb) p iothread_locked
+$2 = true
+(gdb) l 268
+263
+264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, 
+timeout);
+265
+266
+267         if (timeout) {
+268             qemu_mutex_lock_iothread();
+269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", 
+timeout);
+271             }
+272         }
+(gdb)
+
+So, although we've hold iothread_lock in stop&copy phase of migration, we
+can't guarantee the iothread been locked all through the stop & copy phase,
+any thoughts on how to solve this problem?
+
+
+Thanks,
+-Gonglei
+
+On Fri, 03/03 09:29, Gonglei (Arei) wrote:
+>
+Hello Juan & Dave,
+>
+>
+We hit a bug in our test:
+>
+Network error occurs when migrating a guest, libvirt then rollback the
+>
+migration, causes qemu coredump
+>
+qemu log:
+>
+2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
+>
+"STOP"}
+>
+2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+qmp_cmd_name: migrate_cancel
+>
+2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
+>
+"MIGRATION", "data": {"status": "cancelling"}}
+>
+2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+qmp_cmd_name: cont
+>
+2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-balloon device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-net device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-blk device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-serial device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
+>
+vm_state-notify:3ms
+>
+2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
+>
+"RESUME"}
+>
+2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
+>
+this iteration cycle takes 3s, new dirtied data:0MB
+>
+2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
+>
+"MIGRATION_PASS", "data": {"pass": 3}}
+>
+2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
+>
+(131583/18446744073709551615)
+>
+qemu-kvm:
+>
+/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
+>
+virtio_net_save: Assertion `!n->vhost_started' failed.
+>
+2017-03-01 12:54:43.028: shutting down
+>
+>
+From qemu log, qemu received and processed migrate_cancel/cont qmp commands
+>
+after guest been stopped and entered the last round of migration. Then
+>
+migration thread try to save device state when guest is running(started by
+>
+cont command), causes assert and coredump.
+>
+This is because in last iter, we call cpu_synchronize_all_states() to
+>
+synchronize vcpu states, this call will release qemu_global_mutex and wait
+>
+for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
+>
+(gdb) bt
+>
+#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
+>
+/lib64/libpthread.so.0
+>
+#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
+>
+<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
+>
+util/qemu-thread-posix.c:132
+>
+#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413
+>
+<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/cpus.c:995
+>
+#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
+>
+#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
+>
+#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
+>
+/mnt/public/yanghy/qemu-kvm/cpus.c:766
+>
+#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
+>
+(f=0x7f76462f2d30, iterable_only=false) at
+>
+/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
+>
+#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
+>
+<current_migration.37571>, current_active_state=4,
+>
+old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
+>
+migration/migration.c:1753
+>
+#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
+>
+<current_migration.37571>) at migration/migration.c:1922
+>
+#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
+>
+#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
+>
+(gdb) p iothread_locked
+>
+$1 = true
+>
+>
+and then, qemu main thread been executed, it won't block because migration
+>
+thread released the qemu_global_mutex:
+>
+(gdb) thr 1
+>
+[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
+>
+#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
+>
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+%d\n", timeout);
+>
+(gdb) p iothread_locked
+>
+$2 = true
+>
+(gdb) l 268
+>
+263
+>
+264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
+>
+timeout);
+>
+265
+>
+266
+>
+267         if (timeout) {
+>
+268             qemu_mutex_lock_iothread();
+>
+269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+>
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+%d\n", timeout);
+>
+271             }
+>
+272         }
+>
+(gdb)
+>
+>
+So, although we've hold iothread_lock in stop&copy phase of migration, we
+>
+can't guarantee the iothread been locked all through the stop & copy phase,
+>
+any thoughts on how to solve this problem?
+Could you post a backtrace of the assertion?
+
+Fam
+
+On 2017/3/3 18:42, Fam Zheng wrote:
+>
+On Fri, 03/03 09:29, Gonglei (Arei) wrote:
+>
+> Hello Juan & Dave,
+>
+>
+>
+> We hit a bug in our test:
+>
+> Network error occurs when migrating a guest, libvirt then rollback the
+>
+> migration, causes qemu coredump
+>
+> qemu log:
+>
+> 2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+>  {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
+>
+> "STOP"}
+>
+> 2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+>  qmp_cmd_name: migrate_cancel
+>
+> 2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+>  {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
+>
+> "MIGRATION", "data": {"status": "cancelling"}}
+>
+> 2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+>  qmp_cmd_name: cont
+>
+> 2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+>  virtio-balloon device status is 7 that means DRIVER OK
+>
+> 2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+>  virtio-net device status is 7 that means DRIVER OK
+>
+> 2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+>  virtio-blk device status is 7 that means DRIVER OK
+>
+> 2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+>  virtio-serial device status is 7 that means DRIVER OK
+>
+> 2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
+>
+> vm_state-notify:3ms
+>
+> 2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+>  {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
+>
+> "RESUME"}
+>
+> 2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
+>
+>  this iteration cycle takes 3s, new dirtied data:0MB
+>
+> 2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+>  {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
+>
+> "MIGRATION_PASS", "data": {"pass": 3}}
+>
+> 2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
+>
+> (131583/18446744073709551615)
+>
+> qemu-kvm:
+>
+> /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
+>
+> virtio_net_save: Assertion `!n->vhost_started' failed.
+>
+> 2017-03-01 12:54:43.028: shutting down
+>
+>
+>
+> From qemu log, qemu received and processed migrate_cancel/cont qmp commands
+>
+> after guest been stopped and entered the last round of migration. Then
+>
+> migration thread try to save device state when guest is running(started by
+>
+> cont command), causes assert and coredump.
+>
+> This is because in last iter, we call cpu_synchronize_all_states() to
+>
+> synchronize vcpu states, this call will release qemu_global_mutex and wait
+>
+> for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
+>
+> (gdb) bt
+>
+> #0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
+>
+> /lib64/libpthread.so.0
+>
+> #1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
+>
+> <qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
+>
+> util/qemu-thread-posix.c:132
+>
+> #2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80,
+>
+> func=0x7f7643a46413 <do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
+>
+> /mnt/public/yanghy/qemu-kvm/cpus.c:995
+>
+> #3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+> /mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
+>
+> #4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+> /mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
+>
+> #5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
+>
+> /mnt/public/yanghy/qemu-kvm/cpus.c:766
+>
+> #6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
+>
+> (f=0x7f76462f2d30, iterable_only=false) at
+>
+> /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
+>
+> #7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
+>
+> <current_migration.37571>, current_active_state=4,
+>
+> old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
+>
+> migration/migration.c:1753
+>
+> #8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
+>
+> <current_migration.37571>) at migration/migration.c:1922
+>
+> #9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
+>
+> #10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
+>
+> (gdb) p iothread_locked
+>
+> $1 = true
+>
+>
+>
+> and then, qemu main thread been executed, it won't block because migration
+>
+> thread released the qemu_global_mutex:
+>
+> (gdb) thr 1
+>
+> [Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
+>
+> #0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
+>
+> 270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+> %d\n", timeout);
+>
+> (gdb) p iothread_locked
+>
+> $2 = true
+>
+> (gdb) l 268
+>
+> 263
+>
+> 264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
+>
+> timeout);
+>
+> 265
+>
+> 266
+>
+> 267         if (timeout) {
+>
+> 268             qemu_mutex_lock_iothread();
+>
+> 269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+>
+> 270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+> %d\n", timeout);
+>
+> 271             }
+>
+> 272         }
+>
+> (gdb)
+>
+>
+>
+> So, although we've hold iothread_lock in stop&copy phase of migration, we
+>
+> can't guarantee the iothread been locked all through the stop & copy phase,
+>
+> any thoughts on how to solve this problem?
+>
+>
+Could you post a backtrace of the assertion?
+#0  0x00007f97b1fbe5d7 in raise () from /usr/lib64/libc.so.6
+#1  0x00007f97b1fbfcc8 in abort () from /usr/lib64/libc.so.6
+#2  0x00007f97b1fb7546 in __assert_fail_base () from /usr/lib64/libc.so.6
+#3  0x00007f97b1fb75f2 in __assert_fail () from /usr/lib64/libc.so.6
+#4  0x000000000049fd19 in virtio_net_save (f=0x7f97a8ca44d0, 
+opaque=0x7f97a86e9018) at /usr/src/debug/qemu-kvm-2.6.0/hw/
+#5  0x000000000047e380 in vmstate_save_old_style (address@hidden, 
+address@hidden, se=0x7f9
+#6  0x000000000047fb93 in vmstate_save (address@hidden, address@hidden, 
+address@hidden
+#7  0x0000000000481ad2 in qemu_savevm_state_complete_precopy (f=0x7f97a8ca44d0, 
+address@hidden)
+#8  0x00000000006c6b60 in migration_completion (address@hidden 
+<current_migration.38312>, current_active_state=curre
+    address@hidden) at migration/migration.c:1761
+#9  0x00000000006c71db in migration_thread (address@hidden 
+<current_migration.38312>) at migration/migrati
+
+>
+>
+Fam
+>
+--
+Thanks,
+Yang
+
+* Gonglei (Arei) (address@hidden) wrote:
+>
+Hello Juan & Dave,
+cc'ing in pbonzini since it's magic involving cpu_synrhonize_all_states()
+
+>
+We hit a bug in our test:
+>
+Network error occurs when migrating a guest, libvirt then rollback the
+>
+migration, causes qemu coredump
+>
+qemu log:
+>
+2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event":
+>
+"STOP"}
+>
+2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+qmp_cmd_name: migrate_cancel
+>
+2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event":
+>
+"MIGRATION", "data": {"status": "cancelling"}}
+>
+2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|:
+>
+qmp_cmd_name: cont
+>
+2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-balloon device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-net device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-blk device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|:
+>
+virtio-serial device status is 7 that means DRIVER OK
+>
+2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|:
+>
+vm_state-notify:3ms
+>
+2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event":
+>
+"RESUME"}
+>
+2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|:
+>
+this iteration cycle takes 3s, new dirtied data:0MB
+>
+2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|:
+>
+{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event":
+>
+"MIGRATION_PASS", "data": {"pass": 3}}
+>
+2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for
+>
+(131583/18446744073709551615)
+>
+qemu-kvm:
+>
+/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519:
+>
+virtio_net_save: Assertion `!n->vhost_started' failed.
+>
+2017-03-01 12:54:43.028: shutting down
+>
+>
+From qemu log, qemu received and processed migrate_cancel/cont qmp commands
+>
+after guest been stopped and entered the last round of migration. Then
+>
+migration thread try to save device state when guest is running(started by
+>
+cont command), causes assert and coredump.
+>
+This is because in last iter, we call cpu_synchronize_all_states() to
+>
+synchronize vcpu states, this call will release qemu_global_mutex and wait
+>
+for do_kvm_cpu_synchronize_state() to be executed on target vcpu:
+>
+(gdb) bt
+>
+#0  0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from
+>
+/lib64/libpthread.so.0
+>
+#1  0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0
+>
+<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at
+>
+util/qemu-thread-posix.c:132
+>
+#2  0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413
+>
+<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/cpus.c:995
+>
+#3  0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805
+>
+#4  0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at
+>
+/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457
+>
+#5  0x00007f7643a2db0c in cpu_synchronize_all_states () at
+>
+/mnt/public/yanghy/qemu-kvm/cpus.c:766
+>
+#6  0x00007f7643a67b5b in qemu_savevm_state_complete_precopy
+>
+(f=0x7f76462f2d30, iterable_only=false) at
+>
+/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051
+>
+#7  0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0
+>
+<current_migration.37571>, current_active_state=4,
+>
+old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at
+>
+migration/migration.c:1753
+>
+#8  0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0
+>
+<current_migration.37571>) at migration/migration.c:1922
+>
+#9  0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0
+>
+#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6
+>
+(gdb) p iothread_locked
+>
+$1 = true
+>
+>
+and then, qemu main thread been executed, it won't block because migration
+>
+thread released the qemu_global_mutex:
+>
+(gdb) thr 1
+>
+[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))]
+>
+#0  os_host_main_loop_wait (timeout=931565) at main-loop.c:270
+>
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+%d\n", timeout);
+>
+(gdb) p iothread_locked
+>
+$2 = true
+>
+(gdb) l 268
+>
+263
+>
+264         ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len,
+>
+timeout);
+>
+265
+>
+266
+>
+267         if (timeout) {
+>
+268             qemu_mutex_lock_iothread();
+>
+269             if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+>
+270                 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout
+>
+%d\n", timeout);
+>
+271             }
+>
+272         }
+>
+(gdb)
+>
+>
+So, although we've hold iothread_lock in stop&copy phase of migration, we
+>
+can't guarantee the iothread been locked all through the stop & copy phase,
+>
+any thoughts on how to solve this problem?
+Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
+their were times when run_on_cpu would have to drop the BQL and I worried about 
+it,
+but this is the 1st time I've seen an error due to it.
+
+Do you know what the migration state was at that point? Was it 
+MIGRATION_STATUS_CANCELLING?
+I'm thinking perhaps we should stop 'cont' from continuing while migration is in
+MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED - so 
+that
+perhaps libvirt could avoid sending the 'cont' until then?
+
+Dave
+
+
+>
+>
+Thanks,
+>
+-Gonglei
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
+>
+their were times when run_on_cpu would have to drop the BQL and I worried
+>
+about it,
+>
+but this is the 1st time I've seen an error due to it.
+>
+>
+Do you know what the migration state was at that point? Was it
+>
+MIGRATION_STATUS_CANCELLING?
+>
+I'm thinking perhaps we should stop 'cont' from continuing while migration is
+>
+in
+>
+MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED - so
+>
+that
+>
+perhaps libvirt could avoid sending the 'cont' until then?
+No, there's no event, though I thought libvirt would poll until
+"query-migrate" returns the cancelled state.  Of course that is a small
+consolation, because a segfault is unacceptable.
+
+One possibility is to suspend the monitor in qmp_migrate_cancel and
+resume it (with add_migration_state_change_notifier) when we hit the
+CANCELLED state.  I'm not sure what the latency would be between the end
+of migrate_fd_cancel and finally reaching CANCELLED.
+
+Paolo
+
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
+>
+> their were times when run_on_cpu would have to drop the BQL and I worried
+>
+> about it,
+>
+> but this is the 1st time I've seen an error due to it.
+>
+>
+>
+> Do you know what the migration state was at that point? Was it
+>
+> MIGRATION_STATUS_CANCELLING?
+>
+> I'm thinking perhaps we should stop 'cont' from continuing while migration
+>
+> is in
+>
+> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
+>
+> so that
+>
+> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>
+No, there's no event, though I thought libvirt would poll until
+>
+"query-migrate" returns the cancelled state.  Of course that is a small
+>
+consolation, because a segfault is unacceptable.
+I think you might get an event if you set the new migrate capability called
+'events' on!
+
+void migrate_set_state(int *state, int old_state, int new_state)
+{
+    if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+        trace_migrate_set_state(new_state);
+        migrate_generate_event(new_state);
+    }
+}
+
+static void migrate_generate_event(int new_state)
+{
+    if (migrate_use_events()) {
+        qapi_event_send_migration(new_state, &error_abort); 
+    }
+}
+
+That event feature went in sometime after 2.3.0.
+
+>
+One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+resume it (with add_migration_state_change_notifier) when we hit the
+>
+CANCELLED state.  I'm not sure what the latency would be between the end
+>
+of migrate_fd_cancel and finally reaching CANCELLED.
+I don't like suspending monitors; it can potentially take quite a significant
+time to do a cancel.
+How about making 'cont' fail if we're in CANCELLING?
+
+I'd really love to see the 'run_on_cpu' being more careful about the BQL;
+we really need all of the rest of the devices to stay quiesced at times.
+
+Dave
+
+>
+Paolo
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+>
+>
+> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that
+>
+>> their were times when run_on_cpu would have to drop the BQL and I worried
+>
+>> about it,
+>
+>> but this is the 1st time I've seen an error due to it.
+>
+>>
+>
+>> Do you know what the migration state was at that point? Was it
+>
+>> MIGRATION_STATUS_CANCELLING?
+>
+>> I'm thinking perhaps we should stop 'cont' from continuing while migration
+>
+>> is in
+>
+>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
+>
+>> so that
+>
+>> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>
+>
+> No, there's no event, though I thought libvirt would poll until
+>
+> "query-migrate" returns the cancelled state.  Of course that is a small
+>
+> consolation, because a segfault is unacceptable.
+>
+>
+I think you might get an event if you set the new migrate capability called
+>
+'events' on!
+>
+>
+void migrate_set_state(int *state, int old_state, int new_state)
+>
+{
+>
+if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+>
+trace_migrate_set_state(new_state);
+>
+migrate_generate_event(new_state);
+>
+}
+>
+}
+>
+>
+static void migrate_generate_event(int new_state)
+>
+{
+>
+if (migrate_use_events()) {
+>
+qapi_event_send_migration(new_state, &error_abort);
+>
+}
+>
+}
+>
+>
+That event feature went in sometime after 2.3.0.
+>
+>
+> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+> resume it (with add_migration_state_change_notifier) when we hit the
+>
+> CANCELLED state.  I'm not sure what the latency would be between the end
+>
+> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+>
+I don't like suspending monitors; it can potentially take quite a significant
+>
+time to do a cancel.
+>
+How about making 'cont' fail if we're in CANCELLING?
+Actually I thought that would be the case already (in fact CANCELLING is
+internal only; the outside world sees it as "active" in query-migrate).
+
+Lei, what is the runstate?  (That is, why did cont succeed at all)?
+
+Paolo
+
+>
+I'd really love to see the 'run_on_cpu' being more careful about the BQL;
+>
+we really need all of the rest of the devices to stay quiesced at times.
+That's not really possible, because of how condition variables work. :(
+
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+> * Paolo Bonzini (address@hidden) wrote:
+>
+>>
+>
+>>
+>
+>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
+>
+>>> that
+>
+>>> their were times when run_on_cpu would have to drop the BQL and I worried
+>
+>>> about it,
+>
+>>> but this is the 1st time I've seen an error due to it.
+>
+>>>
+>
+>>> Do you know what the migration state was at that point? Was it
+>
+>>> MIGRATION_STATUS_CANCELLING?
+>
+>>> I'm thinking perhaps we should stop 'cont' from continuing while
+>
+>>> migration is in
+>
+>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
+>
+>>> so that
+>
+>>> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>>
+>
+>> No, there's no event, though I thought libvirt would poll until
+>
+>> "query-migrate" returns the cancelled state.  Of course that is a small
+>
+>> consolation, because a segfault is unacceptable.
+>
+>
+>
+> I think you might get an event if you set the new migrate capability called
+>
+> 'events' on!
+>
+>
+>
+> void migrate_set_state(int *state, int old_state, int new_state)
+>
+> {
+>
+>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+>
+>         trace_migrate_set_state(new_state);
+>
+>         migrate_generate_event(new_state);
+>
+>     }
+>
+> }
+>
+>
+>
+> static void migrate_generate_event(int new_state)
+>
+> {
+>
+>     if (migrate_use_events()) {
+>
+>         qapi_event_send_migration(new_state, &error_abort);
+>
+>     }
+>
+> }
+>
+>
+>
+> That event feature went in sometime after 2.3.0.
+>
+>
+>
+>> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+>> resume it (with add_migration_state_change_notifier) when we hit the
+>
+>> CANCELLED state.  I'm not sure what the latency would be between the end
+>
+>> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+>
+>
+> I don't like suspending monitors; it can potentially take quite a
+>
+> significant
+>
+> time to do a cancel.
+>
+> How about making 'cont' fail if we're in CANCELLING?
+>
+>
+Actually I thought that would be the case already (in fact CANCELLING is
+>
+internal only; the outside world sees it as "active" in query-migrate).
+>
+>
+Lei, what is the runstate?  (That is, why did cont succeed at all)?
+I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device
+save, and that's what we get at the end of a migrate and it's legal to restart
+from there.
+
+>
+Paolo
+>
+>
+> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
+>
+> we really need all of the rest of the devices to stay quiesced at times.
+>
+>
+That's not really possible, because of how condition variables work. :(
+*Really* we need to find a solution to that - there's probably lots of 
+other things that can spring up in that small window other than the
+'cont'.
+
+Dave
+
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
+>
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+>
+>
+> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+>> * Paolo Bonzini (address@hidden) wrote:
+>
+>>>
+>
+>>>
+>
+>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
+>
+>>>> that
+>
+>>>> their were times when run_on_cpu would have to drop the BQL and I worried
+>
+>>>> about it,
+>
+>>>> but this is the 1st time I've seen an error due to it.
+>
+>>>>
+>
+>>>> Do you know what the migration state was at that point? Was it
+>
+>>>> MIGRATION_STATUS_CANCELLING?
+>
+>>>> I'm thinking perhaps we should stop 'cont' from continuing while
+>
+>>>> migration is in
+>
+>>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED -
+>
+>>>> so that
+>
+>>>> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>>>
+>
+>>> No, there's no event, though I thought libvirt would poll until
+>
+>>> "query-migrate" returns the cancelled state.  Of course that is a small
+>
+>>> consolation, because a segfault is unacceptable.
+>
+>>
+>
+>> I think you might get an event if you set the new migrate capability called
+>
+>> 'events' on!
+>
+>>
+>
+>> void migrate_set_state(int *state, int old_state, int new_state)
+>
+>> {
+>
+>>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+>
+>>         trace_migrate_set_state(new_state);
+>
+>>         migrate_generate_event(new_state);
+>
+>>     }
+>
+>> }
+>
+>>
+>
+>> static void migrate_generate_event(int new_state)
+>
+>> {
+>
+>>     if (migrate_use_events()) {
+>
+>>         qapi_event_send_migration(new_state, &error_abort);
+>
+>>     }
+>
+>> }
+>
+>>
+>
+>> That event feature went in sometime after 2.3.0.
+>
+>>
+>
+>>> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+>>> resume it (with add_migration_state_change_notifier) when we hit the
+>
+>>> CANCELLED state.  I'm not sure what the latency would be between the end
+>
+>>> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+>>
+>
+>> I don't like suspending monitors; it can potentially take quite a
+>
+>> significant
+>
+>> time to do a cancel.
+>
+>> How about making 'cont' fail if we're in CANCELLING?
+>
+>
+>
+> Actually I thought that would be the case already (in fact CANCELLING is
+>
+> internal only; the outside world sees it as "active" in query-migrate).
+>
+>
+>
+> Lei, what is the runstate?  (That is, why did cont succeed at all)?
+>
+>
+I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device
+>
+save, and that's what we get at the end of a migrate and it's legal to restart
+>
+from there.
+Yeah, but I think we get there at the end of a failed migrate only.  So
+perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid
+"cont" from finish-migrate (only allow it from failed-migrate)?
+
+Paolo
+
+>
+> Paolo
+>
+>
+>
+>> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
+>
+>> we really need all of the rest of the devices to stay quiesced at times.
+>
+>
+>
+> That's not really possible, because of how condition variables work. :(
+>
+>
+*Really* we need to find a solution to that - there's probably lots of
+>
+other things that can spring up in that small window other than the
+>
+'cont'.
+>
+>
+Dave
+>
+>
+--
+>
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+
+Hi Paolo,
+
+On Fri, Mar 3, 2017 at 9:33 PM, Paolo Bonzini <address@hidden> wrote:
+
+>
+>
+>
+On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
+>
+> * Paolo Bonzini (address@hidden) wrote:
+>
+>>
+>
+>>
+>
+>> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+>>> * Paolo Bonzini (address@hidden) wrote:
+>
+>>>>
+>
+>>>>
+>
+>>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+>>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while
+>
+ago that
+>
+>>>>> their were times when run_on_cpu would have to drop the BQL and I
+>
+worried about it,
+>
+>>>>> but this is the 1st time I've seen an error due to it.
+>
+>>>>>
+>
+>>>>> Do you know what the migration state was at that point? Was it
+>
+MIGRATION_STATUS_CANCELLING?
+>
+>>>>> I'm thinking perhaps we should stop 'cont' from continuing while
+>
+migration is in
+>
+>>>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit
+>
+CANCELLED - so that
+>
+>>>>> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>>>>
+>
+>>>> No, there's no event, though I thought libvirt would poll until
+>
+>>>> "query-migrate" returns the cancelled state.  Of course that is a
+>
+small
+>
+>>>> consolation, because a segfault is unacceptable.
+>
+>>>
+>
+>>> I think you might get an event if you set the new migrate capability
+>
+called
+>
+>>> 'events' on!
+>
+>>>
+>
+>>> void migrate_set_state(int *state, int old_state, int new_state)
+>
+>>> {
+>
+>>>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+>
+>>>         trace_migrate_set_state(new_state);
+>
+>>>         migrate_generate_event(new_state);
+>
+>>>     }
+>
+>>> }
+>
+>>>
+>
+>>> static void migrate_generate_event(int new_state)
+>
+>>> {
+>
+>>>     if (migrate_use_events()) {
+>
+>>>         qapi_event_send_migration(new_state, &error_abort);
+>
+>>>     }
+>
+>>> }
+>
+>>>
+>
+>>> That event feature went in sometime after 2.3.0.
+>
+>>>
+>
+>>>> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+>>>> resume it (with add_migration_state_change_notifier) when we hit the
+>
+>>>> CANCELLED state.  I'm not sure what the latency would be between the
+>
+end
+>
+>>>> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+>>>
+>
+>>> I don't like suspending monitors; it can potentially take quite a
+>
+significant
+>
+>>> time to do a cancel.
+>
+>>> How about making 'cont' fail if we're in CANCELLING?
+>
+>>
+>
+>> Actually I thought that would be the case already (in fact CANCELLING is
+>
+>> internal only; the outside world sees it as "active" in query-migrate).
+>
+>>
+>
+>> Lei, what is the runstate?  (That is, why did cont succeed at all)?
+>
+>
+>
+> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
+>
+device
+>
+> save, and that's what we get at the end of a migrate and it's legal to
+>
+restart
+>
+> from there.
+>
+>
+Yeah, but I think we get there at the end of a failed migrate only.  So
+>
+perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE
+I think we do not need to introduce a new state here. If we hit 'cont' and
+the run state is RUN_STATE_FINISH_MIGRATE, we could assume that
+migration failed because 'RUN_STATE_FINISH_MIGRATE' only exists on
+source side, means we are finishing migration, a 'cont' at the meantime
+indicates that we are rolling back, otherwise source side should be
+destroyed.
+
+
+>
+and forbid
+>
+"cont" from finish-migrate (only allow it from failed-migrate)?
+>
+The problem of forbid 'cont' here is that it will result in a failed
+migration and the source
+side will remain paused. We actually expect a usable guest when rollback.
+Is there a way to kill migration thread when we're under main thread, if
+there is, we
+could do the following to solve this problem:
+1. 'cont' received during runstate RUN_STATE_FINISH_MIGRATE
+2. kill migration thread
+3. vm_start()
+
+But this only solves 'cont' problem. As Dave said before, other things could
+happen during the small windows while we are finishing migration, that's
+what I was worried about...
+
+
+>
+Paolo
+>
+>
+>> Paolo
+>
+>>
+>
+>>> I'd really love to see the 'run_on_cpu' being more careful about the
+>
+BQL;
+>
+>>> we really need all of the rest of the devices to stay quiesced at
+>
+times.
+>
+>>
+>
+>> That's not really possible, because of how condition variables work. :(
+>
+>
+>
+> *Really* we need to find a solution to that - there's probably lots of
+>
+> other things that can spring up in that small window other than the
+>
+> 'cont'.
+>
+>
+>
+> Dave
+>
+>
+>
+> --
+>
+> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+>
+>
+
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+On 03/03/2017 14:26, Dr. David Alan Gilbert wrote:
+>
+> * Paolo Bonzini (address@hidden) wrote:
+>
+>>
+>
+>>
+>
+>> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+>>> * Paolo Bonzini (address@hidden) wrote:
+>
+>>>>
+>
+>>>>
+>
+>>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+>>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago
+>
+>>>>> that
+>
+>>>>> their were times when run_on_cpu would have to drop the BQL and I
+>
+>>>>> worried about it,
+>
+>>>>> but this is the 1st time I've seen an error due to it.
+>
+>>>>>
+>
+>>>>> Do you know what the migration state was at that point? Was it
+>
+>>>>> MIGRATION_STATUS_CANCELLING?
+>
+>>>>> I'm thinking perhaps we should stop 'cont' from continuing while
+>
+>>>>> migration is in
+>
+>>>>> MIGRATION_STATUS_CANCELLING.  Do we send an event when we hit CANCELLED
+>
+>>>>> - so that
+>
+>>>>> perhaps libvirt could avoid sending the 'cont' until then?
+>
+>>>>
+>
+>>>> No, there's no event, though I thought libvirt would poll until
+>
+>>>> "query-migrate" returns the cancelled state.  Of course that is a small
+>
+>>>> consolation, because a segfault is unacceptable.
+>
+>>>
+>
+>>> I think you might get an event if you set the new migrate capability
+>
+>>> called
+>
+>>> 'events' on!
+>
+>>>
+>
+>>> void migrate_set_state(int *state, int old_state, int new_state)
+>
+>>> {
+>
+>>>     if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
+>
+>>>         trace_migrate_set_state(new_state);
+>
+>>>         migrate_generate_event(new_state);
+>
+>>>     }
+>
+>>> }
+>
+>>>
+>
+>>> static void migrate_generate_event(int new_state)
+>
+>>> {
+>
+>>>     if (migrate_use_events()) {
+>
+>>>         qapi_event_send_migration(new_state, &error_abort);
+>
+>>>     }
+>
+>>> }
+>
+>>>
+>
+>>> That event feature went in sometime after 2.3.0.
+>
+>>>
+>
+>>>> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+>>>> resume it (with add_migration_state_change_notifier) when we hit the
+>
+>>>> CANCELLED state.  I'm not sure what the latency would be between the end
+>
+>>>> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+>>>
+>
+>>> I don't like suspending monitors; it can potentially take quite a
+>
+>>> significant
+>
+>>> time to do a cancel.
+>
+>>> How about making 'cont' fail if we're in CANCELLING?
+>
+>>
+>
+>> Actually I thought that would be the case already (in fact CANCELLING is
+>
+>> internal only; the outside world sees it as "active" in query-migrate).
+>
+>>
+>
+>> Lei, what is the runstate?  (That is, why did cont succeed at all)?
+>
+>
+>
+> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
+>
+> device
+>
+> save, and that's what we get at the end of a migrate and it's legal to
+>
+> restart
+>
+> from there.
+>
+>
+Yeah, but I think we get there at the end of a failed migrate only.  So
+>
+perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid
+>
+"cont" from finish-migrate (only allow it from failed-migrate)?
+OK, I was wrong in my previous statement; we actually go 
+FINISH_MIGRATE->POSTMIGRATE
+so no new state is needed; you shouldn't be restarting the cpu in 
+FINISH_MIGRATE.
+
+My preference is to get libvirt to wait for the transition to POSTMIGRATE before
+it issues the 'cont'.  I'd rather not block the monitor with 'cont' but I'm
+not sure how we'd cleanly make cont fail without breaking existing libvirts
+that usually don't hit this race. (cc'ing in Jiri).
+
+Dave
+
+>
+Paolo
+>
+>
+>> Paolo
+>
+>>
+>
+>>> I'd really love to see the 'run_on_cpu' being more careful about the BQL;
+>
+>>> we really need all of the rest of the devices to stay quiesced at times.
+>
+>>
+>
+>> That's not really possible, because of how condition variables work. :(
+>
+>
+>
+> *Really* we need to find a solution to that - there's probably lots of
+>
+> other things that can spring up in that small window other than the
+>
+> 'cont'.
+>
+>
+>
+> Dave
+>
+>
+>
+> --
+>
+> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+Hi Dave,
+
+On Fri, Mar 3, 2017 at 9:26 PM, Dr. David Alan Gilbert <address@hidden>
+wrote:
+
+>
+* Paolo Bonzini (address@hidden) wrote:
+>
+>
+>
+>
+>
+> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote:
+>
+> > * Paolo Bonzini (address@hidden) wrote:
+>
+> >>
+>
+> >>
+>
+> >> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote:
+>
+...
+>
+> > That event feature went in sometime after 2.3.0.
+>
+> >
+>
+> >> One possibility is to suspend the monitor in qmp_migrate_cancel and
+>
+> >> resume it (with add_migration_state_change_notifier) when we hit the
+>
+> >> CANCELLED state.  I'm not sure what the latency would be between the
+>
+end
+>
+> >> of migrate_fd_cancel and finally reaching CANCELLED.
+>
+> >
+>
+> > I don't like suspending monitors; it can potentially take quite a
+>
+significant
+>
+> > time to do a cancel.
+>
+> > How about making 'cont' fail if we're in CANCELLING?
+>
+>
+>
+> Actually I thought that would be the case already (in fact CANCELLING is
+>
+> internal only; the outside world sees it as "active" in query-migrate).
+>
+>
+>
+> Lei, what is the runstate?  (That is, why did cont succeed at all)?
+>
+>
+I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the
+>
+device
+>
+It is RUN_STATE_FINISH_MIGRATE.
+
+
+>
+save, and that's what we get at the end of a migrate and it's legal to
+>
+restart
+>
+from there.
+>
+>
+> Paolo
+>
+>
+>
+> > I'd really love to see the 'run_on_cpu' being more careful about the
+>
+BQL;
+>
+> > we really need all of the rest of the devices to stay quiesced at
+>
+times.
+>
+>
+>
+> That's not really possible, because of how condition variables work. :(
+>
+>
+*Really* we need to find a solution to that - there's probably lots of
+>
+other things that can spring up in that small window other than the
+>
+'cont'.
+>
+This is what I was worry about. Not only sync_cpu_state() will call
+run_on_cpu()
+but also vm_stop_force_state() will, both of them did hit the small windows
+in our
+test.
+
+
+>
+>
+Dave
+>
+>
+--
+>
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+
diff --git a/results/classifier/zero-shot/010/review/17743720 b/results/classifier/zero-shot/010/review/17743720
new file mode 100644
index 00000000..1652f7ad
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/17743720
@@ -0,0 +1,795 @@
+other: 0.984
+permissions: 0.981
+debug: 0.974
+graphic: 0.972
+device: 0.971
+performance: 0.965
+semantic: 0.962
+files: 0.961
+PID: 0.955
+socket: 0.954
+vnc: 0.945
+boot: 0.945
+network: 0.944
+KVM: 0.933
+debug: 0.447
+files: 0.081
+performance: 0.076
+PID: 0.049
+other: 0.015
+semantic: 0.006
+device: 0.003
+KVM: 0.003
+graphic: 0.001
+network: 0.001
+socket: 0.001
+permissions: 0.001
+boot: 0.001
+vnc: 0.000
+
+[Qemu-devel] [BUG] living migrate vm pause forever
+
+Sometimes, living migrate vm pause forever, migrate job stop, but very small 
+probability, I can’t reproduce.
+qemu wait semaphore from libvirt send migrate continue, however libvirt wait 
+semaphore from qemu send vm pause.
+
+follow stack:
+qemu:
+Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
+#0  0x00007f504b84d670 in sem_wait () from /lib/x86_64-linux-gnu/libpthread.so.0
+#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0) at 
+qemu-2.12/util/qemu-thread-posix.c:322
+#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50, 
+current_active_state=0x7f50445f2ae4, new_state=10)
+    at qemu-2.12/migration/migration.c:2106
+#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at 
+qemu-2.12/migration/migration.c:2137
+#4  migration_iteration_run (s=0x5574ef692f50) at 
+qemu-2.12/migration/migration.c:2311
+#5  migration_thread (opaque=0x5574ef692f50) 
+atqemu-2.12/migration/migration.c:2415
+#6  0x00007f504b847184 in start_thread () from 
+/lib/x86_64-linux-gnu/libpthread.so.0
+#7  0x00007f504b574bed in clone () from /lib/x86_64-linux-gnu/libc.so.6
+
+libvirt:
+Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
+#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from 
+/lib/x86_64-linux-gnu/libpthread.so.0
+#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000, m=0x7fdbc4002f30) at 
+../../../src/util/virthread.c:252
+#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at 
+../../../src/conf/domain_conf.c:3303
+#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0, 
+vm=0x7fdbc4002f20, persist_xml=0x0,
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss 
+</hostname>\n  
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+flags=777,
+    resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0, 
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990, 
+migParams=0x7fdb82ffc900)
+    at ../../../src/qemu/qemu_migration.c:3937
+#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0, 
+vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0 
+"tcp://172.16.202.17:49152",
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
+ <hos---Type <return> to continue, or q <return> to quit---
+tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+flags=777,
+    resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0, 
+migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
+    at ../../../src/qemu/qemu_migration.c:4118
+#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0, 
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
+    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0, 
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990, 
+migParams=0x7fdb82ffc900,
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
+ <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+flags=777,
+    resource=0) at ../../../src/qemu/qemu_migration.c:5030
+#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0, 
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0, 
+dconnuri=0x0,
+    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0, 
+listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0, 
+compression=0x7fdb78007990,
+    migParams=0x7fdb82ffc900,
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
+ <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+flags=777,
+    dname=0x0, resource=0, v3proto=true) at 
+../../../src/qemu/qemu_migration.c:5124
+#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00, 
+xmlin=0x0,
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
+ <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+dconnuri=0x0,
+    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0, 
+resource=0) at ../../../src/qemu/qemu_driver.c:12996
+#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00, 
+xmlin=0x0,
+    cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n  
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss</hostname>\n 
+ <hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..., 
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8, 
+dconnuri=0x0,
+    uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0, 
+bandwidth=0) at ../../../src/libvirt-domain.c:4698
+#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3 
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620, 
+rerr=0x7fdb82ffcbc0,
+    args=0x7fdb7800b220, ret=0x7fdb78021e90) at ../../../daemon/remote.c:4528
+#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper 
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620, 
+rerr=0x7fdb82ffcbc0,
+    args=0x7fdb7800b220, ret=0x7fdb78021e90) at 
+../../../daemon/remote_dispatch.h:7944
+#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall (prog=0x55d13af98b50, 
+server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
+    at ../../../src/rpc/virnetserverprogram.c:436
+#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50, 
+server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
+    at ../../../src/rpc/virnetserverprogram.c:307
+#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60, 
+client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
+    at ../../../src/rpc/virnetserver.c:148
+-------------------------------------------------------------------------------------------------------------------------------------
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+邮件！
+This e-mail and its attachments contain confidential information from New H3C, 
+which is
+intended only for the person or entity whose address is listed above. Any use 
+of the
+information contained herein in any way (including, but not limited to, total 
+or partial
+disclosure, reproduction, or dissemination) by persons other than the intended
+recipient(s) is prohibited. If you receive this e-mail in error, please notify 
+the sender
+by phone or email immediately and delete it!
+
+* Yuchen (address@hidden) wrote:
+>
+Sometimes, living migrate vm pause forever, migrate job stop, but very small
+>
+probability, I can’t reproduce.
+>
+qemu wait semaphore from libvirt send migrate continue, however libvirt wait
+>
+semaphore from qemu send vm pause.
+Hi,
+  I've copied in Jiri Denemark from libvirt.
+Can you confirm exactly which qemu and libvirt versions you're using
+please.
+
+>
+follow stack:
+>
+qemu:
+>
+Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
+>
+#0  0x00007f504b84d670 in sem_wait () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0) at
+>
+qemu-2.12/util/qemu-thread-posix.c:322
+>
+#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50,
+>
+current_active_state=0x7f50445f2ae4, new_state=10)
+>
+at qemu-2.12/migration/migration.c:2106
+>
+#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at
+>
+qemu-2.12/migration/migration.c:2137
+>
+#4  migration_iteration_run (s=0x5574ef692f50) at
+>
+qemu-2.12/migration/migration.c:2311
+>
+#5  migration_thread (opaque=0x5574ef692f50)
+>
+atqemu-2.12/migration/migration.c:2415
+>
+#6  0x00007f504b847184 in start_thread () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#7  0x00007f504b574bed in clone () from /lib/x86_64-linux-gnu/libc.so.6
+In migration_maybe_pause we have:
+
+    migrate_set_state(&s->state, *current_active_state,
+                      MIGRATION_STATUS_PRE_SWITCHOVER);
+    qemu_sem_wait(&s->pause_sem);
+    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
+                      new_state);
+
+the line numbers don't match my 2.12.0 checkout; so I guess that it's
+that qemu_sem_wait it's stuck at.
+
+QEMU must have sent the switch to PRE_SWITCHOVER and that should have
+sent an event to libvirt, and libvirt should notice that - I'm
+not sure how to tell whether libvirt has seen that event yet or not?
+
+Dave
+
+>
+libvirt:
+>
+Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
+>
+#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000, m=0x7fdbc4002f30) at
+>
+../../../src/util/virthread.c:252
+>
+#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at
+>
+../../../src/conf/domain_conf.c:3303
+>
+#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0,
+>
+vm=0x7fdbc4002f20, persist_xml=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss
+>
+</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0,
+>
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900)
+>
+at ../../../src/qemu/qemu_migration.c:3937
+>
+#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0,
+>
+vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0
+>
+"tcp://172.16.202.17:49152",
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n  <hos---Type <return> to continue, or q <return>
+>
+to quit---
+>
+tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0,
+>
+migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
+>
+at ../../../src/qemu/qemu_migration.c:4118
+>
+#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0,
+>
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
+>
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+resource=0) at ../../../src/qemu/qemu_migration.c:5030
+>
+#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0,
+>
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
+>
+listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0,
+>
+compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+dname=0x0, resource=0, v3proto=true) at
+>
+../../../src/qemu/qemu_migration.c:5124
+>
+#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00,
+>
+xmlin=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0,
+>
+resource=0) at ../../../src/qemu/qemu_driver.c:12996
+>
+#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00,
+>
+xmlin=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777, dname=0x0,
+>
+bandwidth=0) at ../../../src/libvirt-domain.c:4698
+>
+#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3
+>
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
+>
+rerr=0x7fdb82ffcbc0,
+>
+args=0x7fdb7800b220, ret=0x7fdb78021e90) at ../../../daemon/remote.c:4528
+>
+#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper
+>
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
+>
+rerr=0x7fdb82ffcbc0,
+>
+args=0x7fdb7800b220, ret=0x7fdb78021e90) at
+>
+../../../daemon/remote_dispatch.h:7944
+>
+#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall
+>
+(prog=0x55d13af98b50, server=0x55d13af90e60, client=0x55d13b0156f0,
+>
+msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserverprogram.c:436
+>
+#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50,
+>
+server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserverprogram.c:307
+>
+#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60,
+>
+client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserver.c:148
+>
+-------------------------------------------------------------------------------------------------------------------------------------
+>
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+>
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+>
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+>
+邮件！
+>
+This e-mail and its attachments contain confidential information from New
+>
+H3C, which is
+>
+intended only for the person or entity whose address is listed above. Any use
+>
+of the
+>
+information contained herein in any way (including, but not limited to, total
+>
+or partial
+>
+disclosure, reproduction, or dissemination) by persons other than the intended
+>
+recipient(s) is prohibited. If you receive this e-mail in error, please
+>
+notify the sender
+>
+by phone or email immediately and delete it!
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+In migration_maybe_pause we have:
+
+    migrate_set_state(&s->state, *current_active_state,
+                      MIGRATION_STATUS_PRE_SWITCHOVER);
+    qemu_sem_wait(&s->pause_sem);
+    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
+                      new_state);
+
+the line numbers don't match my 2.12.0 checkout; so I guess that it's that 
+qemu_sem_wait it's stuck at.
+
+QEMU must have sent the switch to PRE_SWITCHOVER and that should have sent an 
+event to libvirt, and libvirt should notice that - I'm not sure how to tell 
+whether libvirt has seen that event yet or not?
+
+
+Thank you for your attention. 
+Yes, you are right, QEMU wait semaphore in this place.
+I use qemu-2.12.1, libvirt-4.0.0.
+Because I added some debug code, so the line numbers doesn't match open qemu
+
+-----邮件原件-----
+发件人: Dr. David Alan Gilbert [
+mailto:address@hidden
+] 
+发送时间: 2019年8月21日 19:13
+收件人: yuchen (Cloud) <address@hidden>; address@hidden
+抄送: address@hidden
+主题: Re: [Qemu-devel] [BUG] living migrate vm pause forever
+
+* Yuchen (address@hidden) wrote:
+>
+Sometimes, living migrate vm pause forever, migrate job stop, but very small
+>
+probability, I can’t reproduce.
+>
+qemu wait semaphore from libvirt send migrate continue, however libvirt wait
+>
+semaphore from qemu send vm pause.
+Hi,
+  I've copied in Jiri Denemark from libvirt.
+Can you confirm exactly which qemu and libvirt versions you're using please.
+
+>
+follow stack:
+>
+qemu:
+>
+Thread 6 (Thread 0x7f50445f3700 (LWP 18120)):
+>
+#0  0x00007f504b84d670 in sem_wait () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#1  0x00005574eda1e164 in qemu_sem_wait (sem=sem@entry=0x5574ef6930e0)
+>
+at qemu-2.12/util/qemu-thread-posix.c:322
+>
+#2  0x00005574ed8dd72e in migration_maybe_pause (s=0x5574ef692f50,
+>
+current_active_state=0x7f50445f2ae4, new_state=10)
+>
+at qemu-2.12/migration/migration.c:2106
+>
+#3  0x00005574ed8df51a in migration_completion (s=0x5574ef692f50) at
+>
+qemu-2.12/migration/migration.c:2137
+>
+#4  migration_iteration_run (s=0x5574ef692f50) at
+>
+qemu-2.12/migration/migration.c:2311
+>
+#5  migration_thread (opaque=0x5574ef692f50)
+>
+atqemu-2.12/migration/migration.c:2415
+>
+#6  0x00007f504b847184 in start_thread () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#7  0x00007f504b574bed in clone () from
+>
+/lib/x86_64-linux-gnu/libc.so.6
+In migration_maybe_pause we have:
+
+    migrate_set_state(&s->state, *current_active_state,
+                      MIGRATION_STATUS_PRE_SWITCHOVER);
+    qemu_sem_wait(&s->pause_sem);
+    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
+                      new_state);
+
+the line numbers don't match my 2.12.0 checkout; so I guess that it's that 
+qemu_sem_wait it's stuck at.
+
+QEMU must have sent the switch to PRE_SWITCHOVER and that should have sent an 
+event to libvirt, and libvirt should notice that - I'm not sure how to tell 
+whether libvirt has seen that event yet or not?
+
+Dave
+
+>
+libvirt:
+>
+Thread 95 (Thread 0x7fdb82ffd700 (LWP 28775)):
+>
+#0  0x00007fdd177dc404 in pthread_cond_wait@@GLIBC_2.3.2 () from
+>
+/lib/x86_64-linux-gnu/libpthread.so.0
+>
+#1  0x00007fdd198c3b07 in virCondWait (c=0x7fdbc4003000,
+>
+m=0x7fdbc4002f30) at ../../../src/util/virthread.c:252
+>
+#2  0x00007fdd198f36d2 in virDomainObjWait (vm=0x7fdbc4002f20) at
+>
+../../../src/conf/domain_conf.c:3303
+>
+#3  0x00007fdd09ffaa44 in qemuMigrationRun (driver=0x7fdd000037b0,
+>
+vm=0x7fdbc4002f20, persist_xml=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n  <hostname>mss
+>
+</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+resource=0, spec=0x7fdb82ffc670, dconn=0x0, graphicsuri=0x0,
+>
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900)
+>
+at ../../../src/qemu/qemu_migration.c:3937
+>
+#4  0x00007fdd09ffb26a in doNativeMigrate (driver=0x7fdd000037b0,
+>
+vm=0x7fdbc4002f20, persist_xml=0x0, uri=0x7fdb780073a0
+>
+"tcp://172.16.202.17:49152",
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n
+>
+<name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n  <hos---Type <return> to continue, or q
+>
+<return> to quit---
+>
+tuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"..
+>
+tuuid>., cookieinlen=207, cookieout=0x7fdb82ffcad0,
+>
+tuuid>cookieoutlen=0x7fdb82ffcac8, flags=777,
+>
+resource=0, dconn=0x0, graphicsuri=0x0, nmigrate_disks=0,
+>
+migrate_disks=0x0, compression=0x7fdb78007990, migParams=0x7fdb82ffc900)
+>
+at ../../../src/qemu/qemu_migration.c:4118
+>
+#5  0x00007fdd09ffd808 in qemuMigrationPerformPhase (driver=0x7fdd000037b0,
+>
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, persist_xml=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
+>
+nmigrate_disks=0, migrate_disks=0x0, compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+resource=0) at ../../../src/qemu/qemu_migration.c:5030
+>
+#6  0x00007fdd09ffdbb5 in qemuMigrationPerform (driver=0x7fdd000037b0,
+>
+conn=0x7fdb500205d0, vm=0x7fdbc4002f20, xmlin=0x0, persist_xml=0x0,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", graphicsuri=0x0,
+>
+listenAddress=0x0, nmigrate_disks=0, migrate_disks=0x0, nbdPort=0,
+>
+compression=0x7fdb78007990,
+>
+migParams=0x7fdb82ffc900,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+flags=777,
+>
+dname=0x0, resource=0, v3proto=true) at
+>
+../../../src/qemu/qemu_migration.c:5124
+>
+#7  0x00007fdd0a054725 in qemuDomainMigratePerform3 (dom=0x7fdb78007b00,
+>
+xmlin=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777,
+>
+dname=0x0, resource=0) at ../../../src/qemu/qemu_driver.c:12996
+>
+#8  0x00007fdd199ad0f0 in virDomainMigratePerform3 (domain=0x7fdb78007b00,
+>
+xmlin=0x0,
+>
+cookiein=0x7fdb780084e0 "<qemu-migration>\n  <name>mss-pl_652</name>\n
+>
+<uuid>1f2b2334-451e-424b-822a-ea10452abb38</uuid>\n
+>
+<hostname>mss</hostname>\n
+>
+<hostuuid>334e344a-4130-4336-5534-323544543642</hostuuid>\n</qemu-migra"...,
+>
+cookieinlen=207, cookieout=0x7fdb82ffcad0, cookieoutlen=0x7fdb82ffcac8,
+>
+dconnuri=0x0,
+>
+uri=0x7fdb780073a0 "tcp://172.16.202.17:49152", flags=777,
+>
+dname=0x0, bandwidth=0) at ../../../src/libvirt-domain.c:4698
+>
+#9  0x000055d13923a939 in remoteDispatchDomainMigratePerform3
+>
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
+>
+rerr=0x7fdb82ffcbc0,
+>
+args=0x7fdb7800b220, ret=0x7fdb78021e90) at
+>
+../../../daemon/remote.c:4528
+>
+#10 0x000055d13921a043 in remoteDispatchDomainMigratePerform3Helper
+>
+(server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620,
+>
+rerr=0x7fdb82ffcbc0,
+>
+args=0x7fdb7800b220, ret=0x7fdb78021e90) at
+>
+../../../daemon/remote_dispatch.h:7944
+>
+#11 0x00007fdd19a260b4 in virNetServerProgramDispatchCall
+>
+(prog=0x55d13af98b50, server=0x55d13af90e60, client=0x55d13b0156f0,
+>
+msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserverprogram.c:436
+>
+#12 0x00007fdd19a25c17 in virNetServerProgramDispatch (prog=0x55d13af98b50,
+>
+server=0x55d13af90e60, client=0x55d13b0156f0, msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserverprogram.c:307
+>
+#13 0x000055d13925933b in virNetServerProcessMsg (srv=0x55d13af90e60,
+>
+client=0x55d13b0156f0, prog=0x55d13af98b50, msg=0x55d13afbf620)
+>
+at ../../../src/rpc/virnetserver.c:148
+>
+----------------------------------------------------------------------
+>
+---------------------------------------------------------------
+>
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+>
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+>
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+>
+邮件！
+>
+This e-mail and its attachments contain confidential information from
+>
+New H3C, which is intended only for the person or entity whose address
+>
+is listed above. Any use of the information contained herein in any
+>
+way (including, but not limited to, total or partial disclosure,
+>
+reproduction, or dissemination) by persons other than the intended
+>
+recipient(s) is prohibited. If you receive this e-mail in error,
+>
+please notify the sender by phone or email immediately and delete it!
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
diff --git a/results/classifier/zero-shot/010/review/21221931 b/results/classifier/zero-shot/010/review/21221931
new file mode 100644
index 00000000..759a7668
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/21221931
@@ -0,0 +1,352 @@
+permissions: 0.982
+other: 0.979
+network: 0.976
+device: 0.971
+debug: 0.971
+files: 0.967
+semantic: 0.967
+performance: 0.966
+socket: 0.957
+graphic: 0.948
+boot: 0.947
+PID: 0.945
+vnc: 0.944
+KVM: 0.913
+debug: 0.882
+boot: 0.135
+files: 0.024
+KVM: 0.013
+other: 0.009
+PID: 0.009
+socket: 0.008
+device: 0.007
+performance: 0.005
+graphic: 0.004
+network: 0.003
+semantic: 0.002
+permissions: 0.001
+vnc: 0.001
+
+[BUG] qemu git error with virgl
+
+Hello,
+
+i can't start any system if i use virgl. I get the following error:
+qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
+`con->gl' failed.
+./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
+-smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
+virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
+intel-hda,id=sound0,msi=on -device
+hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
+-device usb-tablet,bus=xhci.0 -net
+nic,macaddr=52:54:00:12:34:62,model=e1000 -net
+tap,ifname=$INTERFACE,script=no,downscript=no -drive
+file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
+Set 'tap3' nonpersistent
+
+i have bicected the issue:
+
+towo:Defiant> git bisect good
+b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
+commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
+Author: Paolo Bonzini <pbonzini@redhat.com>
+Date:   Tue Oct 27 08:44:23 2020 -0400
+
+    vl: remove separate preconfig main_loop
+    Move post-preconfig initialization to the x-exit-preconfig. If
+preconfig
+    is not requested, just exit preconfig mode immediately with the QMP
+    command.
+
+    As a result, the preconfig loop will run with accel_setup_post
+    and os_setup_post restrictions (xen_restrict, chroot, etc.)
+    already done.
+
+    Reviewed-by: Igor Mammedov <imammedo@redhat.com>
+    Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+
+ include/sysemu/runstate.h |  1 -
+ monitor/qmp-cmds.c        |  9 -----
+ softmmu/vl.c              | 95
+++++++++++++++++++++---------------------------
+ 3 files changed, 41 insertions(+), 64 deletions(-)
+
+Regards,
+
+Torsten Wohlfarth
+
+Cc'ing Gerd + patch author/reviewer.
+
+On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
+>
+Hello,
+>
+>
+i can't start any system if i use virgl. I get the following error:
+>
+>
+qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
+>
+`con->gl' failed.
+>
+./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
+>
+-smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
+>
+virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
+>
+intel-hda,id=sound0,msi=on -device
+>
+hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
+>
+-device usb-tablet,bus=xhci.0 -net
+>
+nic,macaddr=52:54:00:12:34:62,model=e1000 -net
+>
+tap,ifname=$INTERFACE,script=no,downscript=no -drive
+>
+file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
+>
+>
+Set 'tap3' nonpersistent
+>
+>
+i have bicected the issue:
+>
+>
+towo:Defiant> git bisect good
+>
+b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
+>
+commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
+>
+Author: Paolo Bonzini <pbonzini@redhat.com>
+>
+Date:   Tue Oct 27 08:44:23 2020 -0400
+>
+>
+    vl: remove separate preconfig main_loop
+>
+>
+    Move post-preconfig initialization to the x-exit-preconfig. If
+>
+preconfig
+>
+    is not requested, just exit preconfig mode immediately with the QMP
+>
+    command.
+>
+>
+    As a result, the preconfig loop will run with accel_setup_post
+>
+    and os_setup_post restrictions (xen_restrict, chroot, etc.)
+>
+    already done.
+>
+>
+    Reviewed-by: Igor Mammedov <imammedo@redhat.com>
+>
+    Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+>
+>
+ include/sysemu/runstate.h |  1 -
+>
+ monitor/qmp-cmds.c        |  9 -----
+>
+ softmmu/vl.c              | 95
+>
+++++++++++++++++++++---------------------------
+>
+ 3 files changed, 41 insertions(+), 64 deletions(-)
+>
+>
+Regards,
+>
+>
+Torsten Wohlfarth
+>
+>
+>
+
+On Sun, 3 Jan 2021 18:28:11 +0100
+Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
+
+>
+Cc'ing Gerd + patch author/reviewer.
+>
+>
+On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
+>
+> Hello,
+>
+>
+>
+> i can't start any system if i use virgl. I get the following error:
+>
+>
+>
+> qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
+>
+> `con->gl' failed.
+Does following fix issue:
+  [PULL 12/55] vl: initialize displays _after_ exiting preconfiguration
+
+>
+> ./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
+>
+> -smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
+>
+> virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
+>
+> intel-hda,id=sound0,msi=on -device
+>
+> hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
+>
+> -device usb-tablet,bus=xhci.0 -net
+>
+> nic,macaddr=52:54:00:12:34:62,model=e1000 -net
+>
+> tap,ifname=$INTERFACE,script=no,downscript=no -drive
+>
+> file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
+>
+>
+>
+> Set 'tap3' nonpersistent
+>
+>
+>
+> i have bicected the issue:
+>
+>
+>
+> towo:Defiant> git bisect good
+>
+> b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
+>
+> commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
+>
+> Author: Paolo Bonzini <pbonzini@redhat.com>
+>
+> Date:   Tue Oct 27 08:44:23 2020 -0400
+>
+>
+>
+>     vl: remove separate preconfig main_loop
+>
+>
+>
+>     Move post-preconfig initialization to the x-exit-preconfig. If
+>
+> preconfig
+>
+>     is not requested, just exit preconfig mode immediately with the QMP
+>
+>     command.
+>
+>
+>
+>     As a result, the preconfig loop will run with accel_setup_post
+>
+>     and os_setup_post restrictions (xen_restrict, chroot, etc.)
+>
+>     already done.
+>
+>
+>
+>     Reviewed-by: Igor Mammedov <imammedo@redhat.com>
+>
+>     Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+>
+>
+>
+>  include/sysemu/runstate.h |  1 -
+>
+>  monitor/qmp-cmds.c        |  9 -----
+>
+>  softmmu/vl.c              | 95
+>
+> ++++++++++++++++++++---------------------------
+>
+>  3 files changed, 41 insertions(+), 64 deletions(-)
+>
+>
+>
+> Regards,
+>
+>
+>
+> Torsten Wohlfarth
+>
+>
+>
+>
+>
+>
+>
+>
+
+Hi Igor,
+
+yes, that fixes my issue.
+
+Regards, Torsten
+
+Am 04.01.21 um 19:50 schrieb Igor Mammedov:
+On Sun, 3 Jan 2021 18:28:11 +0100
+Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
+Cc'ing Gerd + patch author/reviewer.
+
+On 1/2/21 2:11 PM, Torsten Wohlfarth wrote:
+Hello,
+
+i can't start any system if i use virgl. I get the following error:
+
+qemu-x86_64: ../ui/console.c:1791: dpy_gl_ctx_create: Assertion
+`con->gl' failed.
+Does following fix issue:
+   [PULL 12/55] vl: initialize displays _after_ exiting preconfiguration
+./and.sh: line 27: 3337167 Aborted                 qemu-x86_64 -m 4096
+-smp cores=4,sockets=1 -cpu host -machine pc-q35-4.0,accel=kvm -device
+virtio-vga,virgl=on,xres=1280,yres=800 -display sdl,gl=on -device
+intel-hda,id=sound0,msi=on -device
+hda-micro,id=sound0-codec0,bus=sound0.0,cad=0 -device qemu-xhci,id=xhci
+-device usb-tablet,bus=xhci.0 -net
+nic,macaddr=52:54:00:12:34:62,model=e1000 -net
+tap,ifname=$INTERFACE,script=no,downscript=no -drive
+file=/media/daten2/image/lineageos.qcow2,if=virtio,index=1,media=disk,cache=none,aio=threads
+
+Set 'tap3' nonpersistent
+
+i have bicected the issue:
+towo:Defiant> git bisect good
+b4e1a342112e50e05b609e857f38c1f2b7aafdc4 is the first bad commit
+commit b4e1a342112e50e05b609e857f38c1f2b7aafdc4
+Author: Paolo Bonzini <pbonzini@redhat.com>
+Date:   Tue Oct 27 08:44:23 2020 -0400
+
+     vl: remove separate preconfig main_loop
+
+     Move post-preconfig initialization to the x-exit-preconfig. If
+preconfig
+     is not requested, just exit preconfig mode immediately with the QMP
+     command.
+
+     As a result, the preconfig loop will run with accel_setup_post
+     and os_setup_post restrictions (xen_restrict, chroot, etc.)
+     already done.
+
+     Reviewed-by: Igor Mammedov <imammedo@redhat.com>
+     Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+
+  include/sysemu/runstate.h |  1 -
+  monitor/qmp-cmds.c        |  9 -----
+  softmmu/vl.c              | 95
+++++++++++++++++++++---------------------------
+  3 files changed, 41 insertions(+), 64 deletions(-)
+
+Regards,
+
+Torsten Wohlfarth
+
diff --git a/results/classifier/zero-shot/010/review/21247035 b/results/classifier/zero-shot/010/review/21247035
new file mode 100644
index 00000000..748ef48b
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/21247035
@@ -0,0 +1,1345 @@
+other: 0.640
+permissions: 0.541
+device: 0.525
+KVM: 0.514
+debug: 0.468
+performance: 0.427
+graphic: 0.426
+files: 0.375
+semantic: 0.374
+PID: 0.370
+vnc: 0.367
+boot: 0.345
+network: 0.322
+socket: 0.322
+debug: 0.843
+files: 0.092
+PID: 0.063
+performance: 0.027
+device: 0.014
+other: 0.012
+semantic: 0.006
+socket: 0.003
+network: 0.003
+graphic: 0.002
+boot: 0.001
+permissions: 0.001
+vnc: 0.001
+KVM: 0.001
+
+[Qemu-devel] [BUG] I/O thread segfault for QEMU on s390x
+
+Hi,
+I have been noticing some segfaults for QEMU on s390x, and I have been
+hitting this issue quite reliably (at least once in 10 runs of a test
+case). The qemu version is 2.11.50, and I have systemd created coredumps
+when this happens.
+
+Here is a back trace of the segfaulting thread:
+
+
+#0  0x000003ffafed202c in swapcontext () from /lib64/libc.so.6
+#1  0x000002aa355c02ee in qemu_coroutine_new () at
+util/coroutine-ucontext.c:164
+#2  0x000002aa355bec34 in qemu_coroutine_create
+(address@hidden <blk_aio_read_entry>,
+address@hidden) at util/qemu-coroutine.c:76
+#3  0x000002aa35510262 in blk_aio_prwv (blk=0x2aa65fbefa0,
+offset=<optimized out>, bytes=<optimized out>, qiov=0x3ffa002a9c0,
+address@hidden <blk_aio_read_entry>, flags=0,
+cb=0x2aa35340a50 <virtio_blk_rw_complete>, opaque=0x3ffa002a960) at
+block/block-backend.c:1299
+#4  0x000002aa35510376 in blk_aio_preadv (blk=<optimized out>,
+offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
+cb=<optimized out>, opaque=0x3ffa002a960) at block/block-backend.c:1392
+#5  0x000002aa3534114e in submit_requests (niov=<optimized out>,
+num_reqs=<optimized out>, start=<optimized out>, mrb=<optimized out>,
+blk=<optimized out>) at
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:372
+#6  virtio_blk_submit_multireq (blk=<optimized out>,
+address@hidden) at
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:402
+#7  0x000002aa353422e0 in virtio_blk_handle_vq (s=0x2aa6611e7d8,
+vq=0x3ffb0f5f010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
+#8  0x000002aa3536655a in virtio_queue_notify_aio_vq
+(address@hidden) at
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
+#9  0x000002aa35366cd6 in virtio_queue_notify_aio_vq (vq=0x3ffb0f5f010)
+at /usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1511
+#10 virtio_queue_host_notifier_aio_poll (opaque=0x3ffb0f5f078) at
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:2409
+#11 0x000002aa355a8ba4 in run_poll_handlers_once
+(address@hidden) at util/aio-posix.c:497
+#12 0x000002aa355a9b74 in run_poll_handlers (max_ns=<optimized out>,
+ctx=0x2aa65f99310) at util/aio-posix.c:534
+#13 try_poll_mode (blocking=true, ctx=0x2aa65f99310) at util/aio-posix.c:562
+#14 aio_poll (ctx=0x2aa65f99310, address@hidden) at
+util/aio-posix.c:602
+#15 0x000002aa353d2d0a in iothread_run (opaque=0x2aa65f990f0) at
+iothread.c:60
+#16 0x000003ffb0f07e82 in start_thread () from /lib64/libpthread.so.0
+#17 0x000003ffaff91596 in thread_start () from /lib64/libc.so.6
+I don't have much knowledge about i/o threads and the block layer code
+in QEMU, so I would like to report to the community about this issue.
+I believe this very similar to the bug that I reported upstream couple
+of days ago
+(
+https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg04452.html
+).
+Any help would be greatly appreciated.
+
+Thanks
+Farhan
+
+On Thu, Mar 1, 2018 at 10:33 PM, Farhan Ali <address@hidden> wrote:
+>
+Hi,
+>
+>
+I have been noticing some segfaults for QEMU on s390x, and I have been
+>
+hitting this issue quite reliably (at least once in 10 runs of a test case).
+>
+The qemu version is 2.11.50, and I have systemd created coredumps
+>
+when this happens.
+Can you describe the test case or suggest how to reproduce it for us?
+
+Fam
+
+On 03/02/2018 01:13 AM, Fam Zheng wrote:
+On Thu, Mar 1, 2018 at 10:33 PM, Farhan Ali <address@hidden> wrote:
+Hi,
+
+I have been noticing some segfaults for QEMU on s390x, and I have been
+hitting this issue quite reliably (at least once in 10 runs of a test case).
+The qemu version is 2.11.50, and I have systemd created coredumps
+when this happens.
+Can you describe the test case or suggest how to reproduce it for us?
+
+Fam
+The test case is with a single guest, running a memory intensive
+workload. The guest has 8 vpcus and 4G of memory.
+Here is the qemu command line, if that helps:
+
+/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
+-S -object
+secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
+\
+-machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
+-m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
+-object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
+b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
+-display none -no-user-config -nodefaults -chardev
+socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
+-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
+-no-shutdown \
+-boot strict=on -drive
+file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
+-device
+virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
+-drive
+file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
+-device
+virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
+-netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
+virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
+-chardev pty,id=charconsole0 -device
+sclpconsole,chardev=charconsole0,id=console0 -device
+virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
+Please let me know if I need to provide any other information.
+
+Thanks
+Farhan
+
+On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
+>
+Hi,
+>
+>
+I have been noticing some segfaults for QEMU on s390x, and I have been
+>
+hitting this issue quite reliably (at least once in 10 runs of a test case).
+>
+The qemu version is 2.11.50, and I have systemd created coredumps
+>
+when this happens.
+>
+>
+Here is a back trace of the segfaulting thread:
+The backtrace looks normal.
+
+Please post the QEMU command-line and the details of the segfault (which
+memory access faulted?).
+
+>
+#0  0x000003ffafed202c in swapcontext () from /lib64/libc.so.6
+>
+#1  0x000002aa355c02ee in qemu_coroutine_new () at
+>
+util/coroutine-ucontext.c:164
+>
+#2  0x000002aa355bec34 in qemu_coroutine_create
+>
+(address@hidden <blk_aio_read_entry>,
+>
+address@hidden) at util/qemu-coroutine.c:76
+>
+#3  0x000002aa35510262 in blk_aio_prwv (blk=0x2aa65fbefa0, offset=<optimized
+>
+out>, bytes=<optimized out>, qiov=0x3ffa002a9c0,
+>
+address@hidden <blk_aio_read_entry>, flags=0,
+>
+cb=0x2aa35340a50 <virtio_blk_rw_complete>, opaque=0x3ffa002a960) at
+>
+block/block-backend.c:1299
+>
+#4  0x000002aa35510376 in blk_aio_preadv (blk=<optimized out>,
+>
+offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
+>
+cb=<optimized out>, opaque=0x3ffa002a960) at block/block-backend.c:1392
+>
+#5  0x000002aa3534114e in submit_requests (niov=<optimized out>,
+>
+num_reqs=<optimized out>, start=<optimized out>, mrb=<optimized out>,
+>
+blk=<optimized out>) at
+>
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:372
+>
+#6  virtio_blk_submit_multireq (blk=<optimized out>,
+>
+address@hidden) at
+>
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:402
+>
+#7  0x000002aa353422e0 in virtio_blk_handle_vq (s=0x2aa6611e7d8,
+>
+vq=0x3ffb0f5f010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
+>
+#8  0x000002aa3536655a in virtio_queue_notify_aio_vq
+>
+(address@hidden) at
+>
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
+>
+#9  0x000002aa35366cd6 in virtio_queue_notify_aio_vq (vq=0x3ffb0f5f010) at
+>
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1511
+>
+#10 virtio_queue_host_notifier_aio_poll (opaque=0x3ffb0f5f078) at
+>
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:2409
+>
+#11 0x000002aa355a8ba4 in run_poll_handlers_once
+>
+(address@hidden) at util/aio-posix.c:497
+>
+#12 0x000002aa355a9b74 in run_poll_handlers (max_ns=<optimized out>,
+>
+ctx=0x2aa65f99310) at util/aio-posix.c:534
+>
+#13 try_poll_mode (blocking=true, ctx=0x2aa65f99310) at util/aio-posix.c:562
+>
+#14 aio_poll (ctx=0x2aa65f99310, address@hidden) at
+>
+util/aio-posix.c:602
+>
+#15 0x000002aa353d2d0a in iothread_run (opaque=0x2aa65f990f0) at
+>
+iothread.c:60
+>
+#16 0x000003ffb0f07e82 in start_thread () from /lib64/libpthread.so.0
+>
+#17 0x000003ffaff91596 in thread_start () from /lib64/libc.so.6
+>
+>
+>
+I don't have much knowledge about i/o threads and the block layer code in
+>
+QEMU, so I would like to report to the community about this issue.
+>
+I believe this very similar to the bug that I reported upstream couple of
+>
+days ago
+>
+(
+https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg04452.html
+).
+>
+>
+Any help would be greatly appreciated.
+>
+>
+Thanks
+>
+Farhan
+>
+signature.asc
+Description:
+PGP signature
+
+On 03/02/2018 04:23 AM, Stefan Hajnoczi wrote:
+On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
+Hi,
+
+I have been noticing some segfaults for QEMU on s390x, and I have been
+hitting this issue quite reliably (at least once in 10 runs of a test case).
+The qemu version is 2.11.50, and I have systemd created coredumps
+when this happens.
+
+Here is a back trace of the segfaulting thread:
+The backtrace looks normal.
+
+Please post the QEMU command-line and the details of the segfault (which
+memory access faulted?).
+I was able to create another crash today and here is the qemu comand line
+
+/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
+-S -object
+secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
+\
+-machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
+-m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
+-object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
+b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
+-display none -no-user-config -nodefaults -chardev
+socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
+-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
+-no-shutdown \
+-boot strict=on -drive
+file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
+-device
+virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
+-drive
+file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
+-device
+virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
+-netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
+virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
+-chardev pty,id=charconsole0 -device
+sclpconsole,chardev=charconsole0,id=console0 -device
+virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
+This the latest back trace on the segfaulting thread, and it seems to
+segfault in swapcontext.
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
+
+
+This is the remaining back trace:
+
+#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
+#1  0x000002aa33b45566 in qemu_coroutine_new () at
+util/coroutine-ucontext.c:164
+#2  0x000002aa33b43eac in qemu_coroutine_create
+(address@hidden <blk_aio_write_entry>,
+address@hidden) at util/qemu-coroutine.c:76
+#3  0x000002aa33a954da in blk_aio_prwv (blk=0x2aa4f0efda0,
+offset=<optimized out>, bytes=<optimized out>, qiov=0x3ff74019080,
+address@hidden <blk_aio_write_entry>, flags=0,
+cb=0x2aa338c62e8 <virtio_blk_rw_complete>, opaque=0x3ff74019020) at
+block/block-backend.c:1299
+#4  0x000002aa33a9563e in blk_aio_pwritev (blk=<optimized out>,
+offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
+cb=<optimized out>, opaque=0x3ff74019020) at block/block-backend.c:1400
+#5  0x000002aa338c6a38 in submit_requests (niov=<optimized out>,
+num_reqs=1, start=<optimized out>, mrb=0x3ff831fe6e0, blk=<optimized
+out>) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:369
+#6  virtio_blk_submit_multireq (blk=<optimized out>,
+address@hidden) at
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:426
+#7  0x000002aa338c7b78 in virtio_blk_handle_vq (s=0x2aa4f2507c8,
+vq=0x3ff869df010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
+#8  0x000002aa338ebdf2 in virtio_queue_notify_aio_vq (vq=0x3ff869df010)
+at /usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
+#9  0x000002aa33b2df46 in aio_dispatch_handlers
+(address@hidden) at util/aio-posix.c:406
+#10 0x000002aa33b2eb50 in aio_poll (ctx=0x2aa4f0ca050,
+address@hidden) at util/aio-posix.c:692
+#11 0x000002aa33957f6a in iothread_run (opaque=0x2aa4f0c9630) at
+iothread.c:60
+#12 0x000003ff86987e82 in start_thread () from /lib64/libpthread.so.0
+#13 0x000003ff85a11596 in thread_start () from /lib64/libc.so.6
+Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+
+On Fri, Mar 02, 2018 at 10:30:57AM -0500, Farhan Ali wrote:
+>
+>
+>
+On 03/02/2018 04:23 AM, Stefan Hajnoczi wrote:
+>
+> On Thu, Mar 01, 2018 at 09:33:35AM -0500, Farhan Ali wrote:
+>
+> > Hi,
+>
+> >
+>
+> > I have been noticing some segfaults for QEMU on s390x, and I have been
+>
+> > hitting this issue quite reliably (at least once in 10 runs of a test
+>
+> > case).
+>
+> > The qemu version is 2.11.50, and I have systemd created coredumps
+>
+> > when this happens.
+>
+> >
+>
+> > Here is a back trace of the segfaulting thread:
+>
+> The backtrace looks normal.
+>
+>
+>
+> Please post the QEMU command-line and the details of the segfault (which
+>
+> memory access faulted?).
+>
+>
+>
+>
+>
+I was able to create another crash today and here is the qemu comand line
+>
+>
+/usr/bin/qemu-kvm -name guest=sles,debug-threads=on \
+>
+-S -object
+>
+secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-2-sles/master-key.aes
+>
+\
+>
+-machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off \
+>
+-m 4096 -realtime mlock=off -smp 8,sockets=8,cores=1,threads=1 \
+>
+-object iothread,id=iothread1 -object iothread,id=iothread2 -uuid
+>
+b83a596b-3a1a-4ac9-9f3e-d9a4032ee52c \
+>
+-display none -no-user-config -nodefaults -chardev
+>
+socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-2-sles/monitor.sock,server,nowait
+>
+>
+-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
+>
+\
+>
+-boot strict=on -drive
+>
+file=/dev/mapper/360050763998b0883980000002400002b,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
+>
+-device
+>
+virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
+>
+-drive
+>
+file=/dev/mapper/360050763998b0883980000002800002f,format=raw,if=none,id=drive-virtio-disk1,cache=none,aio=native
+>
+-device
+>
+virtio-blk-ccw,iothread=iothread2,scsi=off,devno=fe.0.0002,drive=drive-virtio-disk1,id=virtio-disk1
+>
+-netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=26 -device
+>
+virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:38:a6:36:e8:1f,devno=fe.0.0000
+>
+-chardev pty,id=charconsole0 -device
+>
+sclpconsole,chardev=charconsole0,id=console0 -device
+>
+virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -msg timestamp=on
+>
+>
+>
+This the latest back trace on the segfaulting thread, and it seems to
+>
+segfault in swapcontext.
+>
+>
+Program terminated with signal SIGSEGV, Segmentation fault.
+>
+#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
+Please include the following gdb output:
+
+  (gdb) disas swapcontext
+  (gdb) i r
+
+That way it's possible to see which instruction faulted and which
+registers were being accessed.
+
+>
+This is the remaining back trace:
+>
+>
+#0  0x000003ff8595202c in swapcontext () from /lib64/libc.so.6
+>
+#1  0x000002aa33b45566 in qemu_coroutine_new () at
+>
+util/coroutine-ucontext.c:164
+>
+#2  0x000002aa33b43eac in qemu_coroutine_create
+>
+(address@hidden <blk_aio_write_entry>,
+>
+address@hidden) at util/qemu-coroutine.c:76
+>
+#3  0x000002aa33a954da in blk_aio_prwv (blk=0x2aa4f0efda0, offset=<optimized
+>
+out>, bytes=<optimized out>, qiov=0x3ff74019080,
+>
+address@hidden <blk_aio_write_entry>, flags=0,
+>
+cb=0x2aa338c62e8 <virtio_blk_rw_complete>, opaque=0x3ff74019020) at
+>
+block/block-backend.c:1299
+>
+#4  0x000002aa33a9563e in blk_aio_pwritev (blk=<optimized out>,
+>
+offset=<optimized out>, qiov=<optimized out>, flags=<optimized out>,
+>
+cb=<optimized out>, opaque=0x3ff74019020) at block/block-backend.c:1400
+>
+#5  0x000002aa338c6a38 in submit_requests (niov=<optimized out>, num_reqs=1,
+>
+start=<optimized out>, mrb=0x3ff831fe6e0, blk=<optimized out>) at
+>
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:369
+>
+#6  virtio_blk_submit_multireq (blk=<optimized out>,
+>
+address@hidden) at
+>
+/usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:426
+>
+#7  0x000002aa338c7b78 in virtio_blk_handle_vq (s=0x2aa4f2507c8,
+>
+vq=0x3ff869df010) at /usr/src/debug/qemu-2.11.50/hw/block/virtio-blk.c:620
+>
+#8  0x000002aa338ebdf2 in virtio_queue_notify_aio_vq (vq=0x3ff869df010) at
+>
+/usr/src/debug/qemu-2.11.50/hw/virtio/virtio.c:1515
+>
+#9  0x000002aa33b2df46 in aio_dispatch_handlers
+>
+(address@hidden) at util/aio-posix.c:406
+>
+#10 0x000002aa33b2eb50 in aio_poll (ctx=0x2aa4f0ca050,
+>
+address@hidden) at util/aio-posix.c:692
+>
+#11 0x000002aa33957f6a in iothread_run (opaque=0x2aa4f0c9630) at
+>
+iothread.c:60
+>
+#12 0x000003ff86987e82 in start_thread () from /lib64/libpthread.so.0
+>
+#13 0x000003ff85a11596 in thread_start () from /lib64/libc.so.6
+>
+Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+>
+signature.asc
+Description:
+PGP signature
+
+On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
+Please include the following gdb output:
+
+   (gdb) disas swapcontext
+   (gdb) i r
+
+That way it's possible to see which instruction faulted and which
+registers were being accessed.
+here is the disas out for swapcontext, this is on a coredump with
+debugging symbols enabled for qemu. So the addresses from the previous
+dump is a little different.
+(gdb) disas swapcontext
+Dump of assembler code for function swapcontext:
+   0x000003ff90751fb8 <+0>:       lgr     %r1,%r2
+   0x000003ff90751fbc <+4>:       lgr     %r0,%r3
+   0x000003ff90751fc0 <+8>:       stfpc   248(%r1)
+   0x000003ff90751fc4 <+12>:      std     %f0,256(%r1)
+   0x000003ff90751fc8 <+16>:      std     %f1,264(%r1)
+   0x000003ff90751fcc <+20>:      std     %f2,272(%r1)
+   0x000003ff90751fd0 <+24>:      std     %f3,280(%r1)
+   0x000003ff90751fd4 <+28>:      std     %f4,288(%r1)
+   0x000003ff90751fd8 <+32>:      std     %f5,296(%r1)
+   0x000003ff90751fdc <+36>:      std     %f6,304(%r1)
+   0x000003ff90751fe0 <+40>:      std     %f7,312(%r1)
+   0x000003ff90751fe4 <+44>:      std     %f8,320(%r1)
+   0x000003ff90751fe8 <+48>:      std     %f9,328(%r1)
+   0x000003ff90751fec <+52>:      std     %f10,336(%r1)
+   0x000003ff90751ff0 <+56>:      std     %f11,344(%r1)
+   0x000003ff90751ff4 <+60>:      std     %f12,352(%r1)
+   0x000003ff90751ff8 <+64>:      std     %f13,360(%r1)
+   0x000003ff90751ffc <+68>:      std     %f14,368(%r1)
+   0x000003ff90752000 <+72>:      std     %f15,376(%r1)
+   0x000003ff90752004 <+76>:      slgr    %r2,%r2
+   0x000003ff90752008 <+80>:      stam    %a0,%a15,184(%r1)
+   0x000003ff9075200c <+84>:      stmg    %r0,%r15,56(%r1)
+   0x000003ff90752012 <+90>:      la      %r2,2
+   0x000003ff90752016 <+94>:      lgr     %r5,%r0
+   0x000003ff9075201a <+98>:      la      %r3,384(%r5)
+   0x000003ff9075201e <+102>:     la      %r4,384(%r1)
+   0x000003ff90752022 <+106>:     lghi    %r5,8
+   0x000003ff90752026 <+110>:     svc     175
+   0x000003ff90752028 <+112>:     lgr     %r5,%r0
+=> 0x000003ff9075202c <+116>:  lfpc    248(%r5)
+   0x000003ff90752030 <+120>:     ld      %f0,256(%r5)
+   0x000003ff90752034 <+124>:     ld      %f1,264(%r5)
+   0x000003ff90752038 <+128>:     ld      %f2,272(%r5)
+   0x000003ff9075203c <+132>:     ld      %f3,280(%r5)
+   0x000003ff90752040 <+136>:     ld      %f4,288(%r5)
+   0x000003ff90752044 <+140>:     ld      %f5,296(%r5)
+   0x000003ff90752048 <+144>:     ld      %f6,304(%r5)
+   0x000003ff9075204c <+148>:     ld      %f7,312(%r5)
+   0x000003ff90752050 <+152>:     ld      %f8,320(%r5)
+   0x000003ff90752054 <+156>:     ld      %f9,328(%r5)
+   0x000003ff90752058 <+160>:     ld      %f10,336(%r5)
+   0x000003ff9075205c <+164>:     ld      %f11,344(%r5)
+   0x000003ff90752060 <+168>:     ld      %f12,352(%r5)
+   0x000003ff90752064 <+172>:     ld      %f13,360(%r5)
+   0x000003ff90752068 <+176>:     ld      %f14,368(%r5)
+   0x000003ff9075206c <+180>:     ld      %f15,376(%r5)
+   0x000003ff90752070 <+184>:     lam     %a2,%a15,192(%r5)
+   0x000003ff90752074 <+188>:     lmg     %r0,%r15,56(%r5)
+   0x000003ff9075207a <+194>:     br      %r14
+End of assembler dump.
+
+(gdb) i r
+r0             0x0      0
+r1             0x3ff8fe7de40    4396165881408
+r2             0x0      0
+r3             0x3ff8fe7e1c0    4396165882304
+r4             0x3ff8fe7dfc0    4396165881792
+r5             0x0      0
+r6             0xffffffff88004880       18446744071696304256
+r7             0x3ff880009e0    4396033247712
+r8             0x27ff89000      10736930816
+r9             0x3ff88001460    4396033250400
+r10            0x1000   4096
+r11            0x1261be0        19274720
+r12            0x3ff88001e00    4396033252864
+r13            0x14d0bc0        21826496
+r14            0x1312ac8        19999432
+r15            0x3ff8fe7dc80    4396165880960
+pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
+cc             0x2      2
+
+On 03/05/2018 07:45 PM, Farhan Ali wrote:
+>
+>
+>
+On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
+>
+> Please include the following gdb output:
+>
+>
+>
+>    (gdb) disas swapcontext
+>
+>    (gdb) i r
+>
+>
+>
+> That way it's possible to see which instruction faulted and which
+>
+> registers were being accessed.
+>
+>
+>
+here is the disas out for swapcontext, this is on a coredump with debugging
+>
+symbols enabled for qemu. So the addresses from the previous dump is a little
+>
+different.
+>
+>
+>
+(gdb) disas swapcontext
+>
+Dump of assembler code for function swapcontext:
+>
+   0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
+>
+   0x000003ff90751fbc <+4>:    lgr    %r0,%r3
+>
+   0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
+>
+   0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
+>
+   0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
+>
+   0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
+>
+   0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
+>
+   0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
+>
+   0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
+>
+   0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
+>
+   0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
+>
+   0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
+>
+   0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
+>
+   0x000003ff90751fec <+52>:    std    %f10,336(%r1)
+>
+   0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
+>
+   0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
+>
+   0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
+>
+   0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
+>
+   0x000003ff90752000 <+72>:    std    %f15,376(%r1)
+>
+   0x000003ff90752004 <+76>:    slgr    %r2,%r2
+>
+   0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
+>
+   0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
+>
+   0x000003ff90752012 <+90>:    la    %r2,2
+>
+   0x000003ff90752016 <+94>:    lgr    %r5,%r0
+>
+   0x000003ff9075201a <+98>:    la    %r3,384(%r5)
+>
+   0x000003ff9075201e <+102>:    la    %r4,384(%r1)
+>
+   0x000003ff90752022 <+106>:    lghi    %r5,8
+>
+   0x000003ff90752026 <+110>:    svc    175
+sys_rt_sigprocmask. r0 should not be changed by the system call.
+
+>
+   0x000003ff90752028 <+112>:    lgr    %r5,%r0
+>
+=> 0x000003ff9075202c <+116>:    lfpc    248(%r5)
+so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the 
+2nd parameter to this
+function). Now this is odd.
+
+>
+   0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
+>
+   0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
+>
+   0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
+>
+   0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
+>
+   0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
+>
+   0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
+>
+   0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
+>
+   0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
+>
+   0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
+>
+   0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
+>
+   0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
+>
+   0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
+>
+   0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
+>
+   0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
+>
+   0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
+>
+   0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
+>
+   0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
+>
+   0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
+>
+   0x000003ff9075207a <+194>:    br    %r14
+>
+End of assembler dump.
+>
+>
+(gdb) i r
+>
+r0             0x0    0
+>
+r1             0x3ff8fe7de40    4396165881408
+>
+r2             0x0    0
+>
+r3             0x3ff8fe7e1c0    4396165882304
+>
+r4             0x3ff8fe7dfc0    4396165881792
+>
+r5             0x0    0
+>
+r6             0xffffffff88004880    18446744071696304256
+>
+r7             0x3ff880009e0    4396033247712
+>
+r8             0x27ff89000    10736930816
+>
+r9             0x3ff88001460    4396033250400
+>
+r10            0x1000    4096
+>
+r11            0x1261be0    19274720
+>
+r12            0x3ff88001e00    4396033252864
+>
+r13            0x14d0bc0    21826496
+>
+r14            0x1312ac8    19999432
+>
+r15            0x3ff8fe7dc80    4396165880960
+>
+pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
+>
+cc             0x2    2
+
+On 5 March 2018 at 18:54, Christian Borntraeger <address@hidden> wrote:
+>
+>
+>
+On 03/05/2018 07:45 PM, Farhan Ali wrote:
+>
+>    0x000003ff90752026 <+110>:    svc    175
+>
+>
+sys_rt_sigprocmask. r0 should not be changed by the system call.
+>
+>
+>    0x000003ff90752028 <+112>:    lgr    %r5,%r0
+>
+> => 0x000003ff9075202c <+116>:    lfpc    248(%r5)
+>
+>
+so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the
+>
+2nd parameter to this
+>
+function). Now this is odd.
+...particularly given that the only place we call swapcontext()
+the second parameter is always the address of a local variable
+and can't be 0...
+
+thanks
+-- PMM
+
+Do you happen to run with a recent host kernel that has 
+
+commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
+    s390: scrub registers on kernel entry and KVM exit
+
+
+
+
+
+Can you run with this on top
+diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
+index 13a133a6015c..d6dc0e5e8f74 100644
+--- a/arch/s390/kernel/entry.S
++++ b/arch/s390/kernel/entry.S
+@@ -426,13 +426,13 @@ ENTRY(system_call)
+        UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
+        BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
+        stmg    %r0,%r7,__PT_R0(%r11)
+-       # clear user controlled register to prevent speculative use
+-       xgr     %r0,%r0
+        mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
+        mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
+        mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
+        stg     %r14,__PT_FLAGS(%r11)
+ .Lsysc_do_svc:
++       # clear user controlled register to prevent speculative use
++       xgr     %r0,%r0
+        # load address of system call table
+        lg      %r10,__THREAD_sysc_table(%r13,%r12)
+        llgh    %r8,__PT_INT_CODE+2(%r11)
+
+
+To me it looks like that the critical section cleanup (interrupt during system 
+call entry) might
+save the registers again into ptregs but we have already zeroed out r0.
+This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
+critical
+section cleanup.
+
+Adding Martin and Heiko. Will spin a patch.
+
+
+On 03/05/2018 07:54 PM, Christian Borntraeger wrote:
+>
+>
+>
+On 03/05/2018 07:45 PM, Farhan Ali wrote:
+>
+>
+>
+>
+>
+> On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
+>
+>> Please include the following gdb output:
+>
+>>
+>
+>>    (gdb) disas swapcontext
+>
+>>    (gdb) i r
+>
+>>
+>
+>> That way it's possible to see which instruction faulted and which
+>
+>> registers were being accessed.
+>
+>
+>
+>
+>
+> here is the disas out for swapcontext, this is on a coredump with debugging
+>
+> symbols enabled for qemu. So the addresses from the previous dump is a
+>
+> little different.
+>
+>
+>
+>
+>
+> (gdb) disas swapcontext
+>
+> Dump of assembler code for function swapcontext:
+>
+>    0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
+>
+>    0x000003ff90751fbc <+4>:    lgr    %r0,%r3
+>
+>    0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
+>
+>    0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
+>
+>    0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
+>
+>    0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
+>
+>    0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
+>
+>    0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
+>
+>    0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
+>
+>    0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
+>
+>    0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
+>
+>    0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
+>
+>    0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
+>
+>    0x000003ff90751fec <+52>:    std    %f10,336(%r1)
+>
+>    0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
+>
+>    0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
+>
+>    0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
+>
+>    0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
+>
+>    0x000003ff90752000 <+72>:    std    %f15,376(%r1)
+>
+>    0x000003ff90752004 <+76>:    slgr    %r2,%r2
+>
+>    0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
+>
+>    0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
+>
+>    0x000003ff90752012 <+90>:    la    %r2,2
+>
+>    0x000003ff90752016 <+94>:    lgr    %r5,%r0
+>
+>    0x000003ff9075201a <+98>:    la    %r3,384(%r5)
+>
+>    0x000003ff9075201e <+102>:    la    %r4,384(%r1)
+>
+>    0x000003ff90752022 <+106>:    lghi    %r5,8
+>
+>    0x000003ff90752026 <+110>:    svc    175
+>
+>
+sys_rt_sigprocmask. r0 should not be changed by the system call.
+>
+>
+>    0x000003ff90752028 <+112>:    lgr    %r5,%r0
+>
+> => 0x000003ff9075202c <+116>:    lfpc    248(%r5)
+>
+>
+so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the
+>
+2nd parameter to this
+>
+function). Now this is odd.
+>
+>
+>    0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
+>
+>    0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
+>
+>    0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
+>
+>    0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
+>
+>    0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
+>
+>    0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
+>
+>    0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
+>
+>    0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
+>
+>    0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
+>
+>    0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
+>
+>    0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
+>
+>    0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
+>
+>    0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
+>
+>    0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
+>
+>    0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
+>
+>    0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
+>
+>    0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
+>
+>    0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
+>
+>    0x000003ff9075207a <+194>:    br    %r14
+>
+> End of assembler dump.
+>
+>
+>
+> (gdb) i r
+>
+> r0             0x0    0
+>
+> r1             0x3ff8fe7de40    4396165881408
+>
+> r2             0x0    0
+>
+> r3             0x3ff8fe7e1c0    4396165882304
+>
+> r4             0x3ff8fe7dfc0    4396165881792
+>
+> r5             0x0    0
+>
+> r6             0xffffffff88004880    18446744071696304256
+>
+> r7             0x3ff880009e0    4396033247712
+>
+> r8             0x27ff89000    10736930816
+>
+> r9             0x3ff88001460    4396033250400
+>
+> r10            0x1000    4096
+>
+> r11            0x1261be0    19274720
+>
+> r12            0x3ff88001e00    4396033252864
+>
+> r13            0x14d0bc0    21826496
+>
+> r14            0x1312ac8    19999432
+>
+> r15            0x3ff8fe7dc80    4396165880960
+>
+> pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
+>
+> cc             0x2    2
+
+On 03/05/2018 02:08 PM, Christian Borntraeger wrote:
+Do you happen to run with a recent host kernel that has
+
+commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
+     s390: scrub registers on kernel entry and KVM exit
+Yes.
+Can you run with this on top
+diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
+index 13a133a6015c..d6dc0e5e8f74 100644
+--- a/arch/s390/kernel/entry.S
++++ b/arch/s390/kernel/entry.S
+@@ -426,13 +426,13 @@ ENTRY(system_call)
+         UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
+         BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
+         stmg    %r0,%r7,__PT_R0(%r11)
+-       # clear user controlled register to prevent speculative use
+-       xgr     %r0,%r0
+         mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
+         mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
+         mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
+         stg     %r14,__PT_FLAGS(%r11)
+  .Lsysc_do_svc:
++       # clear user controlled register to prevent speculative use
++       xgr     %r0,%r0
+         # load address of system call table
+         lg      %r10,__THREAD_sysc_table(%r13,%r12)
+         llgh    %r8,__PT_INT_CODE+2(%r11)
+
+
+To me it looks like that the critical section cleanup (interrupt during system 
+call entry) might
+save the registers again into ptregs but we have already zeroed out r0.
+This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
+critical
+section cleanup.
+Okay I will run with this.
+Adding Martin and Heiko. Will spin a patch.
+
+
+On 03/05/2018 07:54 PM, Christian Borntraeger wrote:
+On 03/05/2018 07:45 PM, Farhan Ali wrote:
+On 03/05/2018 06:03 AM, Stefan Hajnoczi wrote:
+Please include the following gdb output:
+
+    (gdb) disas swapcontext
+    (gdb) i r
+
+That way it's possible to see which instruction faulted and which
+registers were being accessed.
+here is the disas out for swapcontext, this is on a coredump with debugging 
+symbols enabled for qemu. So the addresses from the previous dump is a little 
+different.
+
+
+(gdb) disas swapcontext
+Dump of assembler code for function swapcontext:
+    0x000003ff90751fb8 <+0>:    lgr    %r1,%r2
+    0x000003ff90751fbc <+4>:    lgr    %r0,%r3
+    0x000003ff90751fc0 <+8>:    stfpc    248(%r1)
+    0x000003ff90751fc4 <+12>:    std    %f0,256(%r1)
+    0x000003ff90751fc8 <+16>:    std    %f1,264(%r1)
+    0x000003ff90751fcc <+20>:    std    %f2,272(%r1)
+    0x000003ff90751fd0 <+24>:    std    %f3,280(%r1)
+    0x000003ff90751fd4 <+28>:    std    %f4,288(%r1)
+    0x000003ff90751fd8 <+32>:    std    %f5,296(%r1)
+    0x000003ff90751fdc <+36>:    std    %f6,304(%r1)
+    0x000003ff90751fe0 <+40>:    std    %f7,312(%r1)
+    0x000003ff90751fe4 <+44>:    std    %f8,320(%r1)
+    0x000003ff90751fe8 <+48>:    std    %f9,328(%r1)
+    0x000003ff90751fec <+52>:    std    %f10,336(%r1)
+    0x000003ff90751ff0 <+56>:    std    %f11,344(%r1)
+    0x000003ff90751ff4 <+60>:    std    %f12,352(%r1)
+    0x000003ff90751ff8 <+64>:    std    %f13,360(%r1)
+    0x000003ff90751ffc <+68>:    std    %f14,368(%r1)
+    0x000003ff90752000 <+72>:    std    %f15,376(%r1)
+    0x000003ff90752004 <+76>:    slgr    %r2,%r2
+    0x000003ff90752008 <+80>:    stam    %a0,%a15,184(%r1)
+    0x000003ff9075200c <+84>:    stmg    %r0,%r15,56(%r1)
+    0x000003ff90752012 <+90>:    la    %r2,2
+    0x000003ff90752016 <+94>:    lgr    %r5,%r0
+    0x000003ff9075201a <+98>:    la    %r3,384(%r5)
+    0x000003ff9075201e <+102>:    la    %r4,384(%r1)
+    0x000003ff90752022 <+106>:    lghi    %r5,8
+    0x000003ff90752026 <+110>:    svc    175
+sys_rt_sigprocmask. r0 should not be changed by the system call.
+   0x000003ff90752028 <+112>:    lgr    %r5,%r0
+=> 0x000003ff9075202c <+116>:    lfpc    248(%r5)
+so r5 is zero and it was loaded from r0. r0 was loaded from r3 (which is the 
+2nd parameter to this
+function). Now this is odd.
+   0x000003ff90752030 <+120>:    ld    %f0,256(%r5)
+    0x000003ff90752034 <+124>:    ld    %f1,264(%r5)
+    0x000003ff90752038 <+128>:    ld    %f2,272(%r5)
+    0x000003ff9075203c <+132>:    ld    %f3,280(%r5)
+    0x000003ff90752040 <+136>:    ld    %f4,288(%r5)
+    0x000003ff90752044 <+140>:    ld    %f5,296(%r5)
+    0x000003ff90752048 <+144>:    ld    %f6,304(%r5)
+    0x000003ff9075204c <+148>:    ld    %f7,312(%r5)
+    0x000003ff90752050 <+152>:    ld    %f8,320(%r5)
+    0x000003ff90752054 <+156>:    ld    %f9,328(%r5)
+    0x000003ff90752058 <+160>:    ld    %f10,336(%r5)
+    0x000003ff9075205c <+164>:    ld    %f11,344(%r5)
+    0x000003ff90752060 <+168>:    ld    %f12,352(%r5)
+    0x000003ff90752064 <+172>:    ld    %f13,360(%r5)
+    0x000003ff90752068 <+176>:    ld    %f14,368(%r5)
+    0x000003ff9075206c <+180>:    ld    %f15,376(%r5)
+    0x000003ff90752070 <+184>:    lam    %a2,%a15,192(%r5)
+    0x000003ff90752074 <+188>:    lmg    %r0,%r15,56(%r5)
+    0x000003ff9075207a <+194>:    br    %r14
+End of assembler dump.
+
+(gdb) i r
+r0             0x0    0
+r1             0x3ff8fe7de40    4396165881408
+r2             0x0    0
+r3             0x3ff8fe7e1c0    4396165882304
+r4             0x3ff8fe7dfc0    4396165881792
+r5             0x0    0
+r6             0xffffffff88004880    18446744071696304256
+r7             0x3ff880009e0    4396033247712
+r8             0x27ff89000    10736930816
+r9             0x3ff88001460    4396033250400
+r10            0x1000    4096
+r11            0x1261be0    19274720
+r12            0x3ff88001e00    4396033252864
+r13            0x14d0bc0    21826496
+r14            0x1312ac8    19999432
+r15            0x3ff8fe7dc80    4396165880960
+pc             0x3ff9075202c    0x3ff9075202c <swapcontext+116>
+cc             0x2    2
+
+On Mon, 5 Mar 2018 20:08:45 +0100
+Christian Borntraeger <address@hidden> wrote:
+
+>
+Do you happen to run with a recent host kernel that has
+>
+>
+commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
+>
+s390: scrub registers on kernel entry and KVM exit
+>
+>
+Can you run with this on top
+>
+diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
+>
+index 13a133a6015c..d6dc0e5e8f74 100644
+>
+--- a/arch/s390/kernel/entry.S
+>
++++ b/arch/s390/kernel/entry.S
+>
+@@ -426,13 +426,13 @@ ENTRY(system_call)
+>
+UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
+>
+BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
+>
+stmg    %r0,%r7,__PT_R0(%r11)
+>
+-       # clear user controlled register to prevent speculative use
+>
+-       xgr     %r0,%r0
+>
+mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
+>
+mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
+>
+mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
+>
+stg     %r14,__PT_FLAGS(%r11)
+>
+.Lsysc_do_svc:
+>
++       # clear user controlled register to prevent speculative use
+>
++       xgr     %r0,%r0
+>
+# load address of system call table
+>
+lg      %r10,__THREAD_sysc_table(%r13,%r12)
+>
+llgh    %r8,__PT_INT_CODE+2(%r11)
+>
+>
+>
+To me it looks like that the critical section cleanup (interrupt during
+>
+system call entry) might
+>
+save the registers again into ptregs but we have already zeroed out r0.
+>
+This patch moves the clearing of r0 after sysc_do_svc, which should fix the
+>
+critical
+>
+section cleanup.
+>
+>
+Adding Martin and Heiko. Will spin a patch.
+Argh, yes. Thanks Chrisitan, this is it. I have been searching for the bug
+for days now. The point is that if the system call handler is interrupted
+after the xgr but before .Lsysc_do_svc the code at .Lcleanup_system_call 
+repeats the stmg for %r0-%r7 but now %r0 is already zero.
+
+Please commit a patch for this and I'll will queue it up immediately.
+
+-- 
+blue skies,
+   Martin.
+
+"Reality continues to ruin my life." - Calvin.
+
+On 03/06/2018 01:34 AM, Martin Schwidefsky wrote:
+On Mon, 5 Mar 2018 20:08:45 +0100
+Christian Borntraeger <address@hidden> wrote:
+Do you happen to run with a recent host kernel that has
+
+commit 7041d28115e91f2144f811ffe8a195c696b1e1d0
+     s390: scrub registers on kernel entry and KVM exit
+
+Can you run with this on top
+diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
+index 13a133a6015c..d6dc0e5e8f74 100644
+--- a/arch/s390/kernel/entry.S
++++ b/arch/s390/kernel/entry.S
+@@ -426,13 +426,13 @@ ENTRY(system_call)
+         UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
+         BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
+         stmg    %r0,%r7,__PT_R0(%r11)
+-       # clear user controlled register to prevent speculative use
+-       xgr     %r0,%r0
+         mvc     __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
+         mvc     __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
+         mvc     __PT_INT_CODE(4,%r11),__LC_SVC_ILC
+         stg     %r14,__PT_FLAGS(%r11)
+  .Lsysc_do_svc:
++       # clear user controlled register to prevent speculative use
++       xgr     %r0,%r0
+         # load address of system call table
+         lg      %r10,__THREAD_sysc_table(%r13,%r12)
+         llgh    %r8,__PT_INT_CODE+2(%r11)
+
+
+To me it looks like that the critical section cleanup (interrupt during system 
+call entry) might
+save the registers again into ptregs but we have already zeroed out r0.
+This patch moves the clearing of r0 after sysc_do_svc, which should fix the 
+critical
+section cleanup.
+
+Adding Martin and Heiko. Will spin a patch.
+Argh, yes. Thanks Chrisitan, this is it. I have been searching for the bug
+for days now. The point is that if the system call handler is interrupted
+after the xgr but before .Lsysc_do_svc the code at .Lcleanup_system_call
+repeats the stmg for %r0-%r7 but now %r0 is already zero.
+
+Please commit a patch for this and I'll will queue it up immediately.
+This patch does fix the QEMU crash. I haven't seen the crash after
+running the test case for more than a day. Thanks to everyone for taking
+a look at this problem :)
+Thanks
+Farhan
+
diff --git a/results/classifier/zero-shot/010/review/22219210 b/results/classifier/zero-shot/010/review/22219210
new file mode 100644
index 00000000..70293322
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/22219210
@@ -0,0 +1,67 @@
+graphic: 0.701
+performance: 0.498
+device: 0.489
+semantic: 0.387
+other: 0.345
+network: 0.323
+socket: 0.244
+debug: 0.225
+PID: 0.214
+vnc: 0.204
+files: 0.202
+permissions: 0.141
+KVM: 0.099
+boot: 0.070
+debug: 0.965
+network: 0.538
+PID: 0.051
+other: 0.031
+performance: 0.029
+device: 0.023
+socket: 0.021
+files: 0.019
+semantic: 0.005
+boot: 0.004
+graphic: 0.004
+KVM: 0.003
+permissions: 0.002
+vnc: 0.002
+
+[BUG][CPU hot-plug]CPU hot-plugs cause the qemu process to coredump
+
+Hello,Recently, when I was developing CPU hot-plugs under the loongarch
+architecture,
+I found that there was a problem with qemu cpu hot-plugs under x86
+architecture,
+which caused the qemu process coredump when repeatedly inserting and
+unplugging
+the CPU when the TCG was accelerated.
+
+
+The specific operation process is as follows:
+
+1.Use the following command to start the virtual machine
+
+qemu-system-x86_64 \
+-machine q35  \
+-cpu Broadwell-IBRS \
+-smp 1,maxcpus=4,sockets=4,cores=1,threads=1 \
+-m 4G \
+-drive file=~/anolis-8.8.qcow2  \
+-serial stdio   \
+-monitor telnet:localhost:4498,server,nowait
+
+
+2.Enter QEMU Monitor via telnet for repeated CPU insertion and unplugging
+
+telnet 127.0.0.1 4498
+(qemu) device_add
+Broadwell-IBRS-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=cpu1
+(qemu) device_del cpu1
+(qemu) device_add
+Broadwell-IBRS-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=cpu1
+3.You will notice that the QEMU process has a coredump
+
+# malloc(): unsorted double linked list corrupted
+Aborted (core dumped)
+
diff --git a/results/classifier/zero-shot/010/review/23270873 b/results/classifier/zero-shot/010/review/23270873
new file mode 100644
index 00000000..8bc8d59d
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/23270873
@@ -0,0 +1,716 @@
+other: 0.839
+boot: 0.830
+vnc: 0.820
+device: 0.810
+KVM: 0.803
+permissions: 0.802
+debug: 0.788
+network: 0.768
+graphic: 0.764
+socket: 0.758
+semantic: 0.752
+performance: 0.744
+PID: 0.731
+files: 0.730
+debug: 0.890
+boot: 0.131
+files: 0.068
+performance: 0.031
+other: 0.027
+PID: 0.019
+semantic: 0.016
+device: 0.006
+network: 0.003
+socket: 0.003
+KVM: 0.002
+vnc: 0.002
+graphic: 0.001
+permissions: 0.001
+
+[Qemu-devel] [BUG?] aio_get_linux_aio: Assertion `ctx->linux_aio' failed
+
+Hi,
+
+I am seeing some strange QEMU assertion failures for qemu on s390x,
+which prevents a guest from starting.
+
+Git bisecting points to the following commit as the source of the error.
+
+commit ed6e2161715c527330f936d44af4c547f25f687e
+Author: Nishanth Aravamudan <address@hidden>
+Date:   Fri Jun 22 12:37:00 2018 -0700
+
+    linux-aio: properly bubble up errors from initialization
+
+    laio_init() can fail for a couple of reasons, which will lead to a NULL
+    pointer dereference in laio_attach_aio_context().
+
+    To solve this, add a aio_setup_linux_aio() function which is called
+    early in raw_open_common. If this fails, propagate the error up. The
+    signature of aio_get_linux_aio() was not modified, because it seems
+    preferable to return the actual errno from the possible failing
+    initialization calls.
+
+    Additionally, when the AioContext changes, we need to associate a
+    LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
+    callback and call the new aio_setup_linux_aio(), which will allocate a
+new AioContext if needed, and return errors on failures. If it
+fails for
+any reason, fallback to threaded AIO with an error message, as the
+    device is already in-use by the guest.
+
+    Add an assert that aio_get_linux_aio() cannot return NULL.
+
+    Signed-off-by: Nishanth Aravamudan <address@hidden>
+    Message-id: address@hidden
+    Signed-off-by: Stefan Hajnoczi <address@hidden>
+Not sure what is causing this assertion to fail. Here is the qemu
+command line of the guest, from qemu log, which throws this error:
+LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
+QEMU_AUDIO_DRV=none /usr/local/bin/qemu-system-s390x -name
+guest=rt_vm1,debug-threads=on -S -object
+secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-21-rt_vm1/master-key.aes
+-machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off -m
+1024 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -object
+iothread,id=iothread1 -uuid 0cde16cd-091d-41bd-9ac2-5243df5c9a0d
+-display none -no-user-config -nodefaults -chardev
+socket,id=charmonitor,fd=28,server,nowait -mon
+chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
+-boot strict=on -drive
+file=/dev/mapper/360050763998b0883980000002a000031,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
+-device
+virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,write-cache=on
+-netdev tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device
+virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:3a:c8:67:95:84,devno=fe.0.0000
+-netdev tap,fd=32,id=hostnet1,vhost=on,vhostfd=33 -device
+virtio-net-ccw,netdev=hostnet1,id=net1,mac=52:54:00:2a:e5:08,devno=fe.0.0002
+-chardev pty,id=charconsole0 -device
+sclpconsole,chardev=charconsole0,id=console0 -device
+virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -sandbox
+on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny
+-msg timestamp=on
+2018-07-17 15:48:42.252+0000: Domain id=21 is tainted: high-privileges
+2018-07-17T15:48:42.279380Z qemu-system-s390x: -chardev
+pty,id=charconsole0: char device redirected to /dev/pts/3 (label
+charconsole0)
+qemu-system-s390x: util/async.c:339: aio_get_linux_aio: Assertion
+`ctx->linux_aio' failed.
+2018-07-17 15:48:43.309+0000: shutting down, reason=failed
+
+
+Any help debugging this would be greatly appreciated.
+
+Thank you
+Farhan
+
+On 17.07.2018 [13:25:53 -0400], Farhan Ali wrote:
+>
+Hi,
+>
+>
+I am seeing some strange QEMU assertion failures for qemu on s390x,
+>
+which prevents a guest from starting.
+>
+>
+Git bisecting points to the following commit as the source of the error.
+>
+>
+commit ed6e2161715c527330f936d44af4c547f25f687e
+>
+Author: Nishanth Aravamudan <address@hidden>
+>
+Date:   Fri Jun 22 12:37:00 2018 -0700
+>
+>
+linux-aio: properly bubble up errors from initialization
+>
+>
+laio_init() can fail for a couple of reasons, which will lead to a NULL
+>
+pointer dereference in laio_attach_aio_context().
+>
+>
+To solve this, add a aio_setup_linux_aio() function which is called
+>
+early in raw_open_common. If this fails, propagate the error up. The
+>
+signature of aio_get_linux_aio() was not modified, because it seems
+>
+preferable to return the actual errno from the possible failing
+>
+initialization calls.
+>
+>
+Additionally, when the AioContext changes, we need to associate a
+>
+LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
+>
+callback and call the new aio_setup_linux_aio(), which will allocate a
+>
+new AioContext if needed, and return errors on failures. If it fails for
+>
+any reason, fallback to threaded AIO with an error message, as the
+>
+device is already in-use by the guest.
+>
+>
+Add an assert that aio_get_linux_aio() cannot return NULL.
+>
+>
+Signed-off-by: Nishanth Aravamudan <address@hidden>
+>
+Message-id: address@hidden
+>
+Signed-off-by: Stefan Hajnoczi <address@hidden>
+>
+>
+>
+Not sure what is causing this assertion to fail. Here is the qemu command
+>
+line of the guest, from qemu log, which throws this error:
+>
+>
+>
+LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
+>
+QEMU_AUDIO_DRV=none /usr/local/bin/qemu-system-s390x -name
+>
+guest=rt_vm1,debug-threads=on -S -object
+>
+secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-21-rt_vm1/master-key.aes
+>
+-machine s390-ccw-virtio-2.12,accel=kvm,usb=off,dump-guest-core=off -m 1024
+>
+-realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -object
+>
+iothread,id=iothread1 -uuid 0cde16cd-091d-41bd-9ac2-5243df5c9a0d -display
+>
+none -no-user-config -nodefaults -chardev
+>
+socket,id=charmonitor,fd=28,server,nowait -mon
+>
+chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot
+>
+strict=on -drive
+>
+file=/dev/mapper/360050763998b0883980000002a000031,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
+>
+-device
+>
+virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0001,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,write-cache=on
+>
+-netdev tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device
+>
+virtio-net-ccw,netdev=hostnet0,id=net0,mac=02:3a:c8:67:95:84,devno=fe.0.0000
+>
+-netdev tap,fd=32,id=hostnet1,vhost=on,vhostfd=33 -device
+>
+virtio-net-ccw,netdev=hostnet1,id=net1,mac=52:54:00:2a:e5:08,devno=fe.0.0002
+>
+-chardev pty,id=charconsole0 -device
+>
+sclpconsole,chardev=charconsole0,id=console0 -device
+>
+virtio-balloon-ccw,id=balloon0,devno=fe.3.ffba -sandbox
+>
+on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny -msg
+>
+timestamp=on
+>
+>
+>
+>
+2018-07-17 15:48:42.252+0000: Domain id=21 is tainted: high-privileges
+>
+2018-07-17T15:48:42.279380Z qemu-system-s390x: -chardev pty,id=charconsole0:
+>
+char device redirected to /dev/pts/3 (label charconsole0)
+>
+qemu-system-s390x: util/async.c:339: aio_get_linux_aio: Assertion
+>
+`ctx->linux_aio' failed.
+>
+2018-07-17 15:48:43.309+0000: shutting down, reason=failed
+>
+>
+>
+Any help debugging this would be greatly appreciated.
+iiuc, this possibly implies AIO was not actually used previously on this
+guest (it might have silently been falling back to threaded IO?). I
+don't have access to s390x, but would it be possible to run qemu under
+gdb and see if aio_setup_linux_aio is being called at all (I think it
+might not be, but I'm not sure why), and if so, if it's for the context
+in question?
+
+If it's not being called first, could you see what callpath is calling
+aio_get_linux_aio when this assertion trips?
+
+Thanks!
+-Nish
+
+On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
+iiuc, this possibly implies AIO was not actually used previously on this
+guest (it might have silently been falling back to threaded IO?). I
+don't have access to s390x, but would it be possible to run qemu under
+gdb and see if aio_setup_linux_aio is being called at all (I think it
+might not be, but I'm not sure why), and if so, if it's for the context
+in question?
+
+If it's not being called first, could you see what callpath is calling
+aio_get_linux_aio when this assertion trips?
+
+Thanks!
+-Nish
+Hi Nishant,
+From the coredump of the guest this is the call trace that calls
+aio_get_linux_aio:
+Stack trace of thread 145158:
+#0  0x000003ff94dbe274 raise (libc.so.6)
+#1  0x000003ff94da39a8 abort (libc.so.6)
+#2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
+#3  0x000003ff94db634c __assert_fail (libc.so.6)
+#4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
+#5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
+#6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
+#7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
+#8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
+#9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
+#10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
+#11 0x000003ff94f879a8 start_thread (libpthread.so.0)
+#12 0x000003ff94e797ee thread_start (libc.so.6)
+
+
+Thanks for taking a look and responding.
+
+Thanks
+Farhan
+
+On 07/18/2018 09:42 AM, Farhan Ali wrote:
+On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
+iiuc, this possibly implies AIO was not actually used previously on this
+guest (it might have silently been falling back to threaded IO?). I
+don't have access to s390x, but would it be possible to run qemu under
+gdb and see if aio_setup_linux_aio is being called at all (I think it
+might not be, but I'm not sure why), and if so, if it's for the context
+in question?
+
+If it's not being called first, could you see what callpath is calling
+aio_get_linux_aio when this assertion trips?
+
+Thanks!
+-Nish
+Hi Nishant,
+From the coredump of the guest this is the call trace that calls
+aio_get_linux_aio:
+Stack trace of thread 145158:
+#0  0x000003ff94dbe274 raise (libc.so.6)
+#1  0x000003ff94da39a8 abort (libc.so.6)
+#2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
+#3  0x000003ff94db634c __assert_fail (libc.so.6)
+#4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
+#5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
+#6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
+#7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
+#8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
+#9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
+#10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
+#11 0x000003ff94f879a8 start_thread (libpthread.so.0)
+#12 0x000003ff94e797ee thread_start (libc.so.6)
+
+
+Thanks for taking a look and responding.
+
+Thanks
+Farhan
+Trying to debug a little further, the block device in this case is a
+"host device". And looking at your commit carefully you use the
+bdrv_attach_aio_context callback to setup a Linux AioContext.
+For some reason the "host device" struct (BlockDriver bdrv_host_device
+in block/file-posix.c) does not have a bdrv_attach_aio_context defined.
+So a simple change of adding the callback to the struct solves the issue
+and the guest starts fine.
+diff --git a/block/file-posix.c b/block/file-posix.c
+index 28824aa..b8d59fb 100644
+--- a/block/file-posix.c
++++ b/block/file-posix.c
+@@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
+     .bdrv_refresh_limits = raw_refresh_limits,
+     .bdrv_io_plug = raw_aio_plug,
+     .bdrv_io_unplug = raw_aio_unplug,
++    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
+
+     .bdrv_co_truncate       = raw_co_truncate,
+     .bdrv_getlength    = raw_getlength,
+I am not too familiar with block device code in QEMU, so not sure if
+this is the right fix or if there are some underlying problems.
+Thanks
+Farhan
+
+On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
+>
+>
+>
+On 07/18/2018 09:42 AM, Farhan Ali wrote:
+>
+>
+>
+>
+>
+> On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
+>
+> > iiuc, this possibly implies AIO was not actually used previously on this
+>
+> > guest (it might have silently been falling back to threaded IO?). I
+>
+> > don't have access to s390x, but would it be possible to run qemu under
+>
+> > gdb and see if aio_setup_linux_aio is being called at all (I think it
+>
+> > might not be, but I'm not sure why), and if so, if it's for the context
+>
+> > in question?
+>
+> >
+>
+> > If it's not being called first, could you see what callpath is calling
+>
+> > aio_get_linux_aio when this assertion trips?
+>
+> >
+>
+> > Thanks!
+>
+> > -Nish
+>
+>
+>
+>
+>
+> Hi Nishant,
+>
+>
+>
+>  From the coredump of the guest this is the call trace that calls
+>
+> aio_get_linux_aio:
+>
+>
+>
+>
+>
+> Stack trace of thread 145158:
+>
+> #0  0x000003ff94dbe274 raise (libc.so.6)
+>
+> #1  0x000003ff94da39a8 abort (libc.so.6)
+>
+> #2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
+>
+> #3  0x000003ff94db634c __assert_fail (libc.so.6)
+>
+> #4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
+>
+> #5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
+>
+> #6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
+>
+> #7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
+>
+> #8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
+>
+> #9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
+>
+> #10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
+>
+> #11 0x000003ff94f879a8 start_thread (libpthread.so.0)
+>
+> #12 0x000003ff94e797ee thread_start (libc.so.6)
+>
+>
+>
+>
+>
+> Thanks for taking a look and responding.
+>
+>
+>
+> Thanks
+>
+> Farhan
+>
+>
+>
+>
+>
+>
+>
+>
+Trying to debug a little further, the block device in this case is a "host
+>
+device". And looking at your commit carefully you use the
+>
+bdrv_attach_aio_context callback to setup a Linux AioContext.
+>
+>
+For some reason the "host device" struct (BlockDriver bdrv_host_device in
+>
+block/file-posix.c) does not have a bdrv_attach_aio_context defined.
+>
+So a simple change of adding the callback to the struct solves the issue and
+>
+the guest starts fine.
+>
+>
+>
+diff --git a/block/file-posix.c b/block/file-posix.c
+>
+index 28824aa..b8d59fb 100644
+>
+--- a/block/file-posix.c
+>
++++ b/block/file-posix.c
+>
+@@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
+>
+.bdrv_refresh_limits = raw_refresh_limits,
+>
+.bdrv_io_plug = raw_aio_plug,
+>
+.bdrv_io_unplug = raw_aio_unplug,
+>
++    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
+>
+>
+.bdrv_co_truncate       = raw_co_truncate,
+>
+.bdrv_getlength    = raw_getlength,
+>
+>
+>
+>
+I am not too familiar with block device code in QEMU, so not sure if
+>
+this is the right fix or if there are some underlying problems.
+Oh this is quite embarassing! I only added the bdrv_attach_aio_context
+callback for the file-backed device. Your fix is definitely corect for
+host device. Let me make sure there weren't any others missed and I will
+send out a properly formatted patch. Thank you for the quick testing and
+turnaround!
+
+-Nish
+
+On 07/18/2018 08:52 PM, Nishanth Aravamudan wrote:
+>
+On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
+>
+>
+>
+>
+>
+> On 07/18/2018 09:42 AM, Farhan Ali wrote:
+>
+>>
+>
+>>
+>
+>> On 07/17/2018 04:52 PM, Nishanth Aravamudan wrote:
+>
+>>> iiuc, this possibly implies AIO was not actually used previously on this
+>
+>>> guest (it might have silently been falling back to threaded IO?). I
+>
+>>> don't have access to s390x, but would it be possible to run qemu under
+>
+>>> gdb and see if aio_setup_linux_aio is being called at all (I think it
+>
+>>> might not be, but I'm not sure why), and if so, if it's for the context
+>
+>>> in question?
+>
+>>>
+>
+>>> If it's not being called first, could you see what callpath is calling
+>
+>>> aio_get_linux_aio when this assertion trips?
+>
+>>>
+>
+>>> Thanks!
+>
+>>> -Nish
+>
+>>
+>
+>>
+>
+>> Hi Nishant,
+>
+>>
+>
+>>  From the coredump of the guest this is the call trace that calls
+>
+>> aio_get_linux_aio:
+>
+>>
+>
+>>
+>
+>> Stack trace of thread 145158:
+>
+>> #0  0x000003ff94dbe274 raise (libc.so.6)
+>
+>> #1  0x000003ff94da39a8 abort (libc.so.6)
+>
+>> #2  0x000003ff94db62ce __assert_fail_base (libc.so.6)
+>
+>> #3  0x000003ff94db634c __assert_fail (libc.so.6)
+>
+>> #4  0x000002aa20db067a aio_get_linux_aio (qemu-system-s390x)
+>
+>> #5  0x000002aa20d229a8 raw_aio_plug (qemu-system-s390x)
+>
+>> #6  0x000002aa20d309ee bdrv_io_plug (qemu-system-s390x)
+>
+>> #7  0x000002aa20b5a8ea virtio_blk_handle_vq (qemu-system-s390x)
+>
+>> #8  0x000002aa20db2f6e aio_dispatch_handlers (qemu-system-s390x)
+>
+>> #9  0x000002aa20db3c34 aio_poll (qemu-system-s390x)
+>
+>> #10 0x000002aa20be32a2 iothread_run (qemu-system-s390x)
+>
+>> #11 0x000003ff94f879a8 start_thread (libpthread.so.0)
+>
+>> #12 0x000003ff94e797ee thread_start (libc.so.6)
+>
+>>
+>
+>>
+>
+>> Thanks for taking a look and responding.
+>
+>>
+>
+>> Thanks
+>
+>> Farhan
+>
+>>
+>
+>>
+>
+>>
+>
+>
+>
+> Trying to debug a little further, the block device in this case is a "host
+>
+> device". And looking at your commit carefully you use the
+>
+> bdrv_attach_aio_context callback to setup a Linux AioContext.
+>
+>
+>
+> For some reason the "host device" struct (BlockDriver bdrv_host_device in
+>
+> block/file-posix.c) does not have a bdrv_attach_aio_context defined.
+>
+> So a simple change of adding the callback to the struct solves the issue and
+>
+> the guest starts fine.
+>
+>
+>
+>
+>
+> diff --git a/block/file-posix.c b/block/file-posix.c
+>
+> index 28824aa..b8d59fb 100644
+>
+> --- a/block/file-posix.c
+>
+> +++ b/block/file-posix.c
+>
+> @@ -3135,6 +3135,7 @@ static BlockDriver bdrv_host_device = {
+>
+>      .bdrv_refresh_limits = raw_refresh_limits,
+>
+>      .bdrv_io_plug = raw_aio_plug,
+>
+>      .bdrv_io_unplug = raw_aio_unplug,
+>
+> +    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
+>
+>
+>
+>      .bdrv_co_truncate       = raw_co_truncate,
+>
+>      .bdrv_getlength    = raw_getlength,
+>
+>
+>
+>
+>
+>
+>
+> I am not too familiar with block device code in QEMU, so not sure if
+>
+> this is the right fix or if there are some underlying problems.
+>
+>
+Oh this is quite embarassing! I only added the bdrv_attach_aio_context
+>
+callback for the file-backed device. Your fix is definitely corect for
+>
+host device. Let me make sure there weren't any others missed and I will
+>
+send out a properly formatted patch. Thank you for the quick testing and
+>
+turnaround!
+Farhan, can you respin your patch with proper sign-off and patch description?
+Adding qemu-block.
+
+Hi Christian,
+
+On 19.07.2018 [08:55:20 +0200], Christian Borntraeger wrote:
+>
+>
+>
+On 07/18/2018 08:52 PM, Nishanth Aravamudan wrote:
+>
+> On 18.07.2018 [11:10:27 -0400], Farhan Ali wrote:
+>
+>>
+>
+>>
+>
+>> On 07/18/2018 09:42 AM, Farhan Ali wrote:
+<snip>
+
+>
+>> I am not too familiar with block device code in QEMU, so not sure if
+>
+>> this is the right fix or if there are some underlying problems.
+>
+>
+>
+> Oh this is quite embarassing! I only added the bdrv_attach_aio_context
+>
+> callback for the file-backed device. Your fix is definitely corect for
+>
+> host device. Let me make sure there weren't any others missed and I will
+>
+> send out a properly formatted patch. Thank you for the quick testing and
+>
+> turnaround!
+>
+>
+Farhan, can you respin your patch with proper sign-off and patch description?
+>
+Adding qemu-block.
+I sent it yesterday, sorry I didn't cc everyone from this e-mail:
+http://lists.nongnu.org/archive/html/qemu-block/2018-07/msg00516.html
+Thanks,
+Nish
+
diff --git a/results/classifier/zero-shot/010/review/23300761 b/results/classifier/zero-shot/010/review/23300761
new file mode 100644
index 00000000..618f70e0
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/23300761
@@ -0,0 +1,337 @@
+permissions: 0.984
+debug: 0.978
+other: 0.963
+performance: 0.952
+PID: 0.950
+semantic: 0.950
+device: 0.932
+boot: 0.929
+socket: 0.927
+vnc: 0.926
+graphic: 0.924
+files: 0.910
+KVM: 0.897
+network: 0.879
+debug: 0.052
+other: 0.044
+files: 0.038
+performance: 0.030
+PID: 0.025
+semantic: 0.018
+socket: 0.013
+boot: 0.013
+device: 0.012
+vnc: 0.004
+network: 0.004
+permissions: 0.003
+graphic: 0.002
+KVM: 0.000
+
+[Qemu-devel] [BUG] 216 Alerts reported by LGTM for QEMU (some might be release critical)
+
+Hi,
+LGTM reports 16 errors, 81 warnings and 119 recommendations:
+https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
+.
+Some of them are already know (wrong format strings), others look like
+real errors:
+- several multiplication results which don't work as they should in
+contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
+32 bit!),  target/i386/translate.c and other files
+- potential buffer overflows in gdbstub.c and other files
+I am afraid that the overflows in the block code are release critical,
+maybe that in target/i386/translate.c and other errors, too.
+About half of the alerts are issues which can be fixed later.
+
+Regards
+
+Stefan
+
+On 13/07/19 19:46, Stefan Weil wrote:
+>
+>
+LGTM reports 16 errors, 81 warnings and 119 recommendations:
+>
+https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
+.
+>
+>
+Some of them are already know (wrong format strings), others look like
+>
+real errors:
+>
+>
+- several multiplication results which don't work as they should in
+>
+contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
+>
+32 bit!),  target/i386/translate.c and other files
+m->nb_clusters here is limited by s->l2_slice_size (see for example
+handle_alloc) so I wouldn't be surprised if this is a false positive.  I
+couldn't find this particular multiplication in Coverity, but it has
+about 250 issues marked as intentional or false positive so there's
+probably a lot of overlap with what LGTM found.
+
+Paolo
+
+Am 13.07.2019 um 21:42 schrieb Paolo Bonzini:
+>
+On 13/07/19 19:46, Stefan Weil wrote:
+>
+> LGTM reports 16 errors, 81 warnings and 119 recommendations:
+>
+>
+https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
+.
+>
+>
+>
+> Some of them are already known (wrong format strings), others look like
+>
+> real errors:
+>
+>
+>
+> - several multiplication results which don't work as they should in
+>
+> contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
+>
+> 32 bit!),  target/i386/translate.c and other files
+>
+m->nb_clusters here is limited by s->l2_slice_size (see for example
+>
+handle_alloc) so I wouldn't be surprised if this is a false positive.  I
+>
+couldn't find this particular multiplication in Coverity, but it has
+>
+about 250 issues marked as intentional or false positive so there's
+>
+probably a lot of overlap with what LGTM found.
+>
+>
+Paolo
+>
+From other projects I know that there is a certain overlap between the
+results from Coverity Scan an LGTM, but it is good to have both
+analyzers, and the results from LGTM are typically quite reliable.
+
+Even if we know that there is no multiplication overflow, the code could
+be modified. Either the assigned value should use the same data type as
+the factors (possible when there is never an overflow, avoids a size
+extension), or the multiplication could use the larger data type by
+adding a type cast to one of the factors (then an overflow cannot
+happen, static code analysers and human reviewers have an easier job,
+but the multiplication costs more time).
+
+Stefan
+
+Am 14.07.2019 um 15:28 hat Stefan Weil geschrieben:
+>
+Am 13.07.2019 um 21:42 schrieb Paolo Bonzini:
+>
+> On 13/07/19 19:46, Stefan Weil wrote:
+>
+>> LGTM reports 16 errors, 81 warnings and 119 recommendations:
+>
+>>
+https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
+.
+>
+>>
+>
+>> Some of them are already known (wrong format strings), others look like
+>
+>> real errors:
+>
+>>
+>
+>> - several multiplication results which don't work as they should in
+>
+>> contrib/vhost-user-gpu, block/* (m->nb_clusters * s->cluster_size only
+>
+>> 32 bit!),  target/i386/translate.c and other files
+Request sizes are limited to 32 bit in the generic block layer before
+they are even passed to the individual block drivers, so most if not all
+of these are going to be false positives.
+
+>
+> m->nb_clusters here is limited by s->l2_slice_size (see for example
+>
+> handle_alloc) so I wouldn't be surprised if this is a false positive.  I
+>
+> couldn't find this particular multiplication in Coverity, but it has
+>
+> about 250 issues marked as intentional or false positive so there's
+>
+> probably a lot of overlap with what LGTM found.
+>
+>
+>
+> Paolo
+>
+>
+From other projects I know that there is a certain overlap between the
+>
+results from Coverity Scan an LGTM, but it is good to have both
+>
+analyzers, and the results from LGTM are typically quite reliable.
+>
+>
+Even if we know that there is no multiplication overflow, the code could
+>
+be modified. Either the assigned value should use the same data type as
+>
+the factors (possible when there is never an overflow, avoids a size
+>
+extension), or the multiplication could use the larger data type by
+>
+adding a type cast to one of the factors (then an overflow cannot
+>
+happen, static code analysers and human reviewers have an easier job,
+>
+but the multiplication costs more time).
+But if you look at the code we're talking about, you see that it's
+complaining about things where being more explicit would make things
+less readable.
+
+For example, if complains about the multiplication in this line:
+
+    s->file_size += n * s->header.cluster_size;
+
+We know that n * s->header.cluster_size fits in 32 bits, but
+s->file_size is 64 bits (and has to be 64 bits). Do you really think we
+should introduce another uint32_t variable to store the intermediate
+result? And if we cast n to uint64_t, not only might the multiplication
+cost more time, but also human readers would wonder why the result could
+become larger than 32 bits. So a cast would be misleading.
+
+
+It also complains about this line:
+
+    ret = bdrv_truncate(bs->file, (3 + l1_clusters) * s->cluster_size,
+                        PREALLOC_MODE_OFF, &local_err);
+
+Here, we don't even assign the result to a 64 bit variable, but just
+pass it to a function which takes a 64 bit parameter. Again, I don't
+think introducing additional variables for the intermediate result or
+adding casts would be an improvement of the situation.
+
+
+So I don't think this is a good enough tool to base our code on what it
+does and doesn't understand. It would have too much of a negative impact
+on our code. We'd rather need a way to mark false positives as such and
+move on without changing the code in such cases.
+
+Kevin
+
+On Sat, 13 Jul 2019 at 18:46, Stefan Weil <address@hidden> wrote:
+>
+LGTM reports 16 errors, 81 warnings and 119 recommendations:
+>
+https://lgtm.com/projects/g/qemu/qemu/alerts/?mode=list
+.
+I had a look at some of these before, but mostly I came
+to the conclusion that it wasn't worth trying to put the
+effort into keeping up with the site because they didn't
+seem to provide any useful way to mark things as false
+positives. Coverity has its flaws but at least you can do
+that kind of thing in its UI (it runs at about a 33% fp
+rate, I think.) "Analyzer thinks this multiply can overflow
+but in fact it's not possible" is quite a common false
+positive cause...
+
+Anyway, if you want to fish out specific issues, analyse
+whether they're false positive or real, and report them
+to the mailing list as followups to the patches which
+introduced the issue, that's probably the best way for
+us to make use of this analyzer. (That is essentially
+what I do for coverity.)
+
+thanks
+-- PMM
+
+Am 14.07.2019 um 19:30 schrieb Peter Maydell:
+[...]
+>
+"Analyzer thinks this multiply can overflow
+>
+but in fact it's not possible" is quite a common false
+>
+positive cause...
+The analysers don't complain because a multiply can overflow.
+
+They complain because the code indicates that a larger result is
+expected, for example uint64_t = uint32_t * uint32_t. They would not
+complain for the same multiplication if it were assigned to a uint32_t.
+
+So there is a simple solution to write the code in a way which avoids
+false positives...
+
+Stefan
+
+Stefan Weil <address@hidden> writes:
+
+>
+Am 14.07.2019 um 19:30 schrieb Peter Maydell:
+>
+[...]
+>
+> "Analyzer thinks this multiply can overflow
+>
+> but in fact it's not possible" is quite a common false
+>
+> positive cause...
+>
+>
+>
+The analysers don't complain because a multiply can overflow.
+>
+>
+They complain because the code indicates that a larger result is
+>
+expected, for example uint64_t = uint32_t * uint32_t. They would not
+>
+complain for the same multiplication if it were assigned to a uint32_t.
+I agree this is an anti-pattern.
+
+>
+So there is a simple solution to write the code in a way which avoids
+>
+false positives...
+You wrote elsewhere in this thread:
+
+    Either the assigned value should use the same data type as the
+    factors (possible when there is never an overflow, avoids a size
+    extension), or the multiplication could use the larger data type by
+    adding a type cast to one of the factors (then an overflow cannot
+    happen, static code analysers and human reviewers have an easier
+    job, but the multiplication costs more time).
+
+Makes sense to me.
+
+On 7/14/19 5:30 PM, Peter Maydell wrote:
+>
+I had a look at some of these before, but mostly I came
+>
+to the conclusion that it wasn't worth trying to put the
+>
+effort into keeping up with the site because they didn't
+>
+seem to provide any useful way to mark things as false
+>
+positives. Coverity has its flaws but at least you can do
+>
+that kind of thing in its UI (it runs at about a 33% fp
+>
+rate, I think.)
+Yes, LGTM wants you to modify the source code with
+
+  /* lgtm [cpp/some-warning-code] */
+
+and on the same line as the reported problem.  Which is mildly annoying in that
+you're definitely committing to LGTM in the long term.  Also for any
+non-trivial bit of code, it will almost certainly run over 80 columns.
+
+
+r~
+
diff --git a/results/classifier/zero-shot/010/review/23448582 b/results/classifier/zero-shot/010/review/23448582
new file mode 100644
index 00000000..47d23df6
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/23448582
@@ -0,0 +1,289 @@
+other: 0.990
+debug: 0.989
+permissions: 0.988
+semantic: 0.987
+graphic: 0.987
+performance: 0.985
+PID: 0.983
+socket: 0.982
+files: 0.979
+device: 0.979
+network: 0.973
+vnc: 0.973
+boot: 0.967
+KVM: 0.958
+debug: 0.851
+device: 0.126
+PID: 0.104
+files: 0.031
+performance: 0.025
+other: 0.020
+socket: 0.020
+vnc: 0.009
+semantic: 0.005
+network: 0.005
+KVM: 0.004
+boot: 0.003
+graphic: 0.003
+permissions: 0.003
+
+[BUG REPORT] cxl process in infinity loop
+
+Hi, all
+
+When I did the cxl memory hot-plug test on QEMU, I accidentally connected 
+two memdev to the same downstream port, the command like below:
+
+>
+-object memory-backend-ram,size=262144k,share=on,id=vmem0 \
+>
+-object memory-backend-ram,size=262144k,share=on,id=vmem1 \
+>
+-device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+>
+-device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+>
+-device cxl-upstream,bus=root_port0,id=us0 \
+>
+-device cxl-downstream,port=0,bus=us0,id=swport00,chassis=0,slot=5 \
+>
+-device cxl-downstream,port=0,bus=us0,id=swport01,chassis=0,slot=7 \
+same downstream port but has different slot!
+
+>
+-device cxl-type3,bus=swport00,volatile-memdev=vmem0,id=cxl-vmem0 \
+>
+-device cxl-type3,bus=swport01,volatile-memdev=vmem1,id=cxl-vmem1 \
+>
+-M
+>
+cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=64G,cxl-fmw.0.interleave-granularity=4k
+>
+\
+There is no error occurred when vm start, but when I executed the “cxl list” 
+command to view
+the CXL objects info, the process can not end properly.
+
+Then I used strace to trace the process, I found that the process is in 
+infinity loop:
+# strace cxl list
+......
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+write(3, "1\n\0", 3)                    = 3
+close(3)                                = 0
+access("/run/udev/queue", F_OK)         = 0
+
+[Environment]:
+linux: V6.10-rc3
+QEMU: V9.0.0
+ndctl: v79
+
+I know this is because of the wrong use of the QEMU command, but I think we 
+should 
+be aware of this error in one of the QEMU, OS or ndctl side at least.
+
+Thanks
+Xingtao
+
+On Tue, 2 Jul 2024 00:30:06 +0000
+"Xingtao Yao (Fujitsu)" <yaoxt.fnst@fujitsu.com> wrote:
+
+>
+Hi, all
+>
+>
+When I did the cxl memory hot-plug test on QEMU, I accidentally connected
+>
+two memdev to the same downstream port, the command like below:
+>
+>
+> -object memory-backend-ram,size=262144k,share=on,id=vmem0 \
+>
+> -object memory-backend-ram,size=262144k,share=on,id=vmem1 \
+>
+> -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+>
+> -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+>
+> -device cxl-upstream,bus=root_port0,id=us0 \
+>
+> -device cxl-downstream,port=0,bus=us0,id=swport00,chassis=0,slot=5 \
+>
+> -device cxl-downstream,port=0,bus=us0,id=swport01,chassis=0,slot=7 \
+>
+same downstream port but has different slot!
+>
+>
+> -device cxl-type3,bus=swport00,volatile-memdev=vmem0,id=cxl-vmem0 \
+>
+> -device cxl-type3,bus=swport01,volatile-memdev=vmem1,id=cxl-vmem1 \
+>
+> -M
+>
+> cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=64G,cxl-fmw.0.interleave-granularity=4k
+>
+>  \
+>
+>
+There is no error occurred when vm start, but when I executed the “cxl list”
+>
+command to view
+>
+the CXL objects info, the process can not end properly.
+I'd be happy to look preventing this on QEMU side if you send one,
+but in general there are are lots of ways to shoot yourself in the
+foot with CXL and PCI device emulation in QEMU so I'm not going
+to rush to solve this specific one.
+
+Likewise, some hardening in kernel / userspace probably makes sense but
+this is a non compliant switch so priority of a fix is probably fairly low.
+
+Jonathan
+
+>
+>
+Then I used strace to trace the process, I found that the process is in
+>
+infinity loop:
+>
+# strace cxl list
+>
+......
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=1000000}, NULL) = 0
+>
+openat(AT_FDCWD, "/sys/bus/cxl/flush", O_WRONLY|O_CLOEXEC) = 3
+>
+write(3, "1\n\0", 3)                    = 3
+>
+close(3)                                = 0
+>
+access("/run/udev/queue", F_OK)         = 0
+>
+>
+[Environment]:
+>
+linux: V6.10-rc3
+>
+QEMU: V9.0.0
+>
+ndctl: v79
+>
+>
+I know this is because of the wrong use of the QEMU command, but I think we
+>
+should
+>
+be aware of this error in one of the QEMU, OS or ndctl side at least.
+>
+>
+Thanks
+>
+Xingtao
+
diff --git a/results/classifier/zero-shot/010/review/24930826 b/results/classifier/zero-shot/010/review/24930826
new file mode 100644
index 00000000..a2df7fc6
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/24930826
@@ -0,0 +1,57 @@
+device: 0.709
+graphic: 0.667
+performance: 0.624
+other: 0.535
+PID: 0.532
+debug: 0.525
+network: 0.513
+semantic: 0.487
+vnc: 0.473
+socket: 0.447
+permissions: 0.398
+files: 0.338
+boot: 0.218
+KVM: 0.172
+debug: 0.787
+device: 0.253
+network: 0.044
+files: 0.037
+KVM: 0.018
+PID: 0.016
+socket: 0.012
+other: 0.008
+semantic: 0.004
+performance: 0.003
+permissions: 0.002
+vnc: 0.002
+boot: 0.001
+graphic: 0.001
+
+[Qemu-devel] [BUG] vhost-user: hot-unplug vhost-user nic for windows guest OS will fail with 100% reproduce rate
+
+Hi, guys
+
+I met a problem when hot-unplug vhost-user nic for Windows 2008 rc2 sp1 64 
+(Guest OS)
+
+The xml of nic is as followed:
+<interface type='vhostuser'>
+  <mac address='52:54:00:3b:83:aa'/>
+  <source type='unix' path='/var/run/vhost-user/port1' mode='client'/>
+  <target dev='port1'/>
+  <model type='virtio'/>
+  <driver queues='4'/>
+  <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
+</interface>
+
+Firstly, I use virsh attach-device win2008 vif.xml to hot-plug a nic for Guest 
+OS. This operation returns success.
+After guest OS discover nic successfully, I use virsh detach-device win2008 
+vif.xml to hot-unplug it. This operation will fail with 100% reproduce rate.
+
+However, if I hot-plug and hot-unplug virtio-net nic , it will not fail.
+
+I have analysis the process of qmp_device_del , I found that qemu have inject 
+interrupt to acpi to let it notice guest OS to remove nic.
+I guess there is something wrong in Windows when handle the interrupt.
+
diff --git a/results/classifier/zero-shot/010/review/25842545 b/results/classifier/zero-shot/010/review/25842545
new file mode 100644
index 00000000..05add992
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/25842545
@@ -0,0 +1,226 @@
+other: 0.912
+KVM: 0.867
+vnc: 0.862
+device: 0.847
+debug: 0.836
+performance: 0.831
+semantic: 0.829
+PID: 0.829
+boot: 0.824
+graphic: 0.822
+permissions: 0.817
+socket: 0.808
+files: 0.806
+network: 0.796
+KVM: 0.983
+debug: 0.931
+socket: 0.682
+PID: 0.068
+device: 0.047
+files: 0.047
+performance: 0.045
+other: 0.035
+network: 0.012
+semantic: 0.011
+boot: 0.008
+permissions: 0.004
+graphic: 0.003
+vnc: 0.003
+
+[Qemu-devel] [Bug?] Guest pause because VMPTRLD failed in KVM
+
+Hello,
+
+  We encountered a problem that a guest paused because the KMOD report VMPTRLD 
+failed.
+
+The related information is as follows:
+
+1) Qemu command:
+   /usr/bin/qemu-kvm -name omu1 -S -machine pc-i440fx-2.3,accel=kvm,usb=off -cpu
+host -m 15625 -realtime mlock=off -smp 8,sockets=1,cores=8,threads=1 -uuid
+a2aacfff-6583-48b4-b6a4-e6830e519931 -no-user-config -nodefaults -chardev
+socket,id=charmonitor,path=/var/lib/libvirt/qemu/omu1.monitor,server,nowait
+-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown
+-boot strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive
+file=/home/env/guest1.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native
+  -device
+virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0
+  -drive
+file=/home/env/guest_300G.img,if=none,id=drive-virtio-disk1,format=raw,cache=none,aio=native
+  -device
+virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk1,id=virtio-disk1
+  -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device
+virtio-net-pci,netdev=hostnet0,id=net0,mac=00:00:80:05:00:00,bus=pci.0,addr=0x3
+-netdev tap,fd=27,id=hostnet1,vhost=on,vhostfd=28 -device
+virtio-net-pci,netdev=hostnet1,id=net1,mac=00:00:80:05:00:01,bus=pci.0,addr=0x4
+-chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0
+-device usb-tablet,id=input0 -vnc 0.0.0.0:0 -device
+cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2 -device
+virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on
+
+   2) Qemu log:
+   KVM: entry failed, hardware error 0x4
+   RAX=00000000ffffffed RBX=ffff8803fa2d7fd8 RCX=0100000000000000
+RDX=0000000000000000
+   RSI=0000000000000000 RDI=0000000000000046 RBP=ffff8803fa2d7e90
+RSP=ffff8803fa2efe90
+   R8 =0000000000000000 R9 =0000000000000000 R10=0000000000000000
+R11=000000000000b69a
+   R12=0000000000000001 R13=ffffffff81a25b40 R14=0000000000000000
+R15=ffff8803fa2d7fd8
+   RIP=ffffffff81053e16 RFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
+   ES =0000 0000000000000000 ffffffff 00c00000
+   CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
+   SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS   [-WA]
+   DS =0000 0000000000000000 ffffffff 00c00000
+   FS =0000 0000000000000000 ffffffff 00c00000
+   GS =0000 ffff88040f540000 ffffffff 00c00000
+   LDT=0000 0000000000000000 ffffffff 00c00000
+   TR =0040 ffff88040f550a40 00002087 00008b00 DPL=0 TSS64-busy
+   GDT=     ffff88040f549000 0000007f
+   IDT=     ffffffffff529000 00000fff
+   CR0=80050033 CR2=00007f81ca0c5000 CR3=00000003f5081000 CR4=000407e0
+   DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
+DR3=0000000000000000
+   DR6=00000000ffff0ff0 DR7=0000000000000400
+   EFER=0000000000000d01
+   Code=?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? <??> ?? ??
+?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
+
+   3) Demsg
+   [347315.028339] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
+   klogd 1.4.1, ---------- state change ----------
+   [347315.039506] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
+   [347315.051728] kvm: vmptrld ffff8817ec5f0000/17ec5f0000 failed
+   [347315.057472] vmwrite error: reg 6c0a value ffff88307e66e480 (err
+2120672384)
+   [347315.064567] Pid: 69523, comm: qemu-kvm Tainted: GF           X
+3.0.93-0.8-default #1
+   [347315.064569] Call Trace:
+   [347315.064587]  [<ffffffff810049d5>] dump_trace+0x75/0x300
+   [347315.064595]  [<ffffffff8145e3e3>] dump_stack+0x69/0x6f
+   [347315.064617]  [<ffffffffa03738de>] vmx_vcpu_load+0x11e/0x1d0 [kvm_intel]
+   [347315.064647]  [<ffffffffa029a204>] kvm_arch_vcpu_load+0x44/0x1d0 [kvm]
+   [347315.064669]  [<ffffffff81054ee1>] finish_task_switch+0x81/0xe0
+   [347315.064676]  [<ffffffff8145f0b4>] thread_return+0x3b/0x2a7
+   [347315.064687]  [<ffffffffa028d9b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+   [347315.064703]  [<ffffffffa02a16d1>] __vcpu_run+0xd1/0x260 [kvm]
+   [347315.064732]  [<ffffffffa02a2418>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 
+[kvm]
+   [347315.064759]  [<ffffffffa028ecee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+   [347315.064771]  [<ffffffff8116bdfb>] do_vfs_ioctl+0x8b/0x3b0
+   [347315.064776]  [<ffffffff8116c1c1>] sys_ioctl+0xa1/0xb0
+   [347315.064783]  [<ffffffff81469272>] system_call_fastpath+0x16/0x1b
+   [347315.064797]  [<00007fee51969ce7>] 0x7fee51969ce6
+   [347315.064799] vmwrite error: reg 6c0c value ffff88307e664000 (err
+2120630272)
+   [347315.064802] Pid: 69523, comm: qemu-kvm Tainted: GF           X
+3.0.93-0.8-default #1
+   [347315.064803] Call Trace:
+   [347315.064807]  [<ffffffff810049d5>] dump_trace+0x75/0x300
+   [347315.064811]  [<ffffffff8145e3e3>] dump_stack+0x69/0x6f
+   [347315.064817]  [<ffffffffa03738ec>] vmx_vcpu_load+0x12c/0x1d0 [kvm_intel]
+   [347315.064832]  [<ffffffffa029a204>] kvm_arch_vcpu_load+0x44/0x1d0 [kvm]
+   [347315.064851]  [<ffffffff81054ee1>] finish_task_switch+0x81/0xe0
+   [347315.064855]  [<ffffffff8145f0b4>] thread_return+0x3b/0x2a7
+   [347315.064865]  [<ffffffffa028d9b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+   [347315.064880]  [<ffffffffa02a16d1>] __vcpu_run+0xd1/0x260 [kvm]
+   [347315.064907]  [<ffffffffa02a2418>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 
+[kvm]
+   [347315.064933]  [<ffffffffa028ecee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+   [347315.064943]  [<ffffffff8116bdfb>] do_vfs_ioctl+0x8b/0x3b0
+   [347315.064947]  [<ffffffff8116c1c1>] sys_ioctl+0xa1/0xb0
+   [347315.064951]  [<ffffffff81469272>] system_call_fastpath+0x16/0x1b
+   [347315.064957]  [<00007fee51969ce7>] 0x7fee51969ce6
+   [347315.064959] vmwrite error: reg 6c10 value 0 (err 0)
+
+   4) The isssue can't be reporduced. I search the Intel VMX sepc about reaseons
+of vmptrld failure:
+   The instruction fails if its operand is not properly aligned, sets
+unsupported physical-address bits, or is equal to the VMXON
+   pointer. In addition, the instruction fails if the 32 bits in memory
+referenced by the operand do not match the VMCS
+   revision identifier supported by this processor.
+
+   But I can't find any cues from the KVM source code. It seems each
+   error conditions is impossible in theory. :(
+
+Any suggestions will be appreciated! Paolo?
+
+-- 
+Regards,
+-Gonglei
+
+On 10/11/2016 15:10, gong lei wrote:
+>
+4) The isssue can't be reporduced. I search the Intel VMX sepc about
+>
+reaseons
+>
+of vmptrld failure:
+>
+The instruction fails if its operand is not properly aligned, sets
+>
+unsupported physical-address bits, or is equal to the VMXON
+>
+pointer. In addition, the instruction fails if the 32 bits in memory
+>
+referenced by the operand do not match the VMCS
+>
+revision identifier supported by this processor.
+>
+>
+But I can't find any cues from the KVM source code. It seems each
+>
+error conditions is impossible in theory. :(
+Yes, it should not happen. :(
+
+If it's not reproducible, it's really hard to say what it was, except a
+random memory corruption elsewhere or even a bit flip (!).
+
+Paolo
+
+On 2016/11/17 20:39, Paolo Bonzini wrote:
+>
+>
+On 10/11/2016 15:10, gong lei wrote:
+>
+>     4) The isssue can't be reporduced. I search the Intel VMX sepc about
+>
+> reaseons
+>
+> of vmptrld failure:
+>
+>     The instruction fails if its operand is not properly aligned, sets
+>
+> unsupported physical-address bits, or is equal to the VMXON
+>
+>     pointer. In addition, the instruction fails if the 32 bits in memory
+>
+> referenced by the operand do not match the VMCS
+>
+>     revision identifier supported by this processor.
+>
+>
+>
+>     But I can't find any cues from the KVM source code. It seems each
+>
+>     error conditions is impossible in theory. :(
+>
+Yes, it should not happen. :(
+>
+>
+If it's not reproducible, it's really hard to say what it was, except a
+>
+random memory corruption elsewhere or even a bit flip (!).
+>
+>
+Paolo
+Thanks for your reply, Paolo :)
+
+-- 
+Regards,
+-Gonglei
+
diff --git a/results/classifier/zero-shot/010/review/25892827 b/results/classifier/zero-shot/010/review/25892827
new file mode 100644
index 00000000..3e61ed66
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/25892827
@@ -0,0 +1,1101 @@
+other: 0.892
+permissions: 0.881
+KVM: 0.872
+debug: 0.868
+vnc: 0.846
+boot: 0.839
+network: 0.839
+device: 0.839
+graphic: 0.832
+semantic: 0.825
+socket: 0.822
+performance: 0.819
+files: 0.804
+PID: 0.792
+KVM: 0.881
+debug: 0.617
+PID: 0.132
+performance: 0.058
+files: 0.056
+boot: 0.025
+other: 0.023
+device: 0.014
+socket: 0.013
+semantic: 0.009
+permissions: 0.004
+vnc: 0.004
+network: 0.004
+graphic: 0.002
+
+[Qemu-devel] [BUG/RFC] Two cpus are not brought up normally in SLES11 sp3 VM after reboot
+
+Hi,
+
+Recently we encountered a problem in our project: 2 CPUs in VM are not brought 
+up normally after reboot.
+
+Our host is using KVM kmod 3.6 and QEMU 2.1.
+A SLES 11 sp3 VM configured with 8 vcpus,
+cpu model is configured with 'host-passthrough'.
+
+After VM's first time started up, everything seems to be OK.
+and then VM is paniced and rebooted.
+After reboot, only 6 cpus are brought up in VM, cpu1 and cpu7 are not online.
+
+This is the only message we can get from VM:
+VM dmesg shows:
+[    0.069867] Booting Node   0, Processors  #1
+[    5.060042] CPU1: Stuck ??
+[    5.060499]  #2
+[    5.088322] kvm-clock: cpu 2, msr 6:3fc90901, secondary cpu clock
+[    5.088335] KVM setup async PF for cpu 2
+[    5.092967] NMI watchdog enabled, takes one hw-pmu counter.
+[    5.094405]  #3
+[    5.108324] kvm-clock: cpu 3, msr 6:3fcd0901, secondary cpu clock
+[    5.108333] KVM setup async PF for cpu 3
+[    5.113553] NMI watchdog enabled, takes one hw-pmu counter.
+[    5.114970]  #4
+[    5.128325] kvm-clock: cpu 4, msr 6:3fd10901, secondary cpu clock
+[    5.128336] KVM setup async PF for cpu 4
+[    5.134576] NMI watchdog enabled, takes one hw-pmu counter.
+[    5.135998]  #5
+[    5.152324] kvm-clock: cpu 5, msr 6:3fd50901, secondary cpu clock
+[    5.152334] KVM setup async PF for cpu 5
+[    5.154764] NMI watchdog enabled, takes one hw-pmu counter.
+[    5.156467]  #6
+[    5.172327] kvm-clock: cpu 6, msr 6:3fd90901, secondary cpu clock
+[    5.172341] KVM setup async PF for cpu 6
+[    5.180738] NMI watchdog enabled, takes one hw-pmu counter.
+[    5.182173]  #7 Ok.
+[   10.170815] CPU7: Stuck ??
+[   10.171648] Brought up 6 CPUs
+[   10.172394] Total of 6 processors activated (28799.97 BogoMIPS).
+
+From host, we found that QEMU vcpu1 thread and vcpu7 thread were not consuming 
+any cpu (Should be in idle state),
+All of VCPUs' stacks in host is like bellow:
+
+[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+[<ffffffffffffffff>] 0xffffffffffffffff
+
+We looked into the kernel codes that could leading to the above 'Stuck' warning,
+and found that the only possible is the emulation of 'cpuid' instruct in 
+kvm/qemu has something wrong.
+But since we can’t reproduce this problem, we are not quite sure.
+Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+
+Has anyone come across these problem before? Or any idea?
+
+Thanks,
+zhanghailiang
+
+On 06/07/2015 09:54, zhanghailiang wrote:
+>
+>
+From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+>
+consuming any cpu (Should be in idle state),
+>
+All of VCPUs' stacks in host is like bellow:
+>
+>
+[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+>
+[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+>
+[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+>
+[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+>
+[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+>
+[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+>
+[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+>
+[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+>
+[<ffffffffffffffff>] 0xffffffffffffffff
+>
+>
+We looked into the kernel codes that could leading to the above 'Stuck'
+>
+warning,
+>
+and found that the only possible is the emulation of 'cpuid' instruct in
+>
+kvm/qemu has something wrong.
+>
+But since we can’t reproduce this problem, we are not quite sure.
+>
+Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+Can you explain the relationship to the cpuid emulation?  What do the
+traces say about vcpus 1 and 7?
+
+Paolo
+
+On 2015/7/6 16:45, Paolo Bonzini wrote:
+On 06/07/2015 09:54, zhanghailiang wrote:
+From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+consuming any cpu (Should be in idle state),
+All of VCPUs' stacks in host is like bellow:
+
+[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+[<ffffffffffffffff>] 0xffffffffffffffff
+
+We looked into the kernel codes that could leading to the above 'Stuck'
+warning,
+and found that the only possible is the emulation of 'cpuid' instruct in
+kvm/qemu has something wrong.
+But since we can’t reproduce this problem, we are not quite sure.
+Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+Can you explain the relationship to the cpuid emulation?  What do the
+traces say about vcpus 1 and 7?
+OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
+located in
+do_boot_cpu(). It's in BSP context, the call process is:
+BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
+-> wakeup_secondary_via_INIT() to trigger APs.
+It will wait 5s for APs to startup, if some AP not startup normally, it will 
+print 'CPU%d Stuck' or 'CPU%d: Not responding'.
+
+If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
+begins to execute the code
+'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
+smp_callin()(smpboot.c).
+The follow is the starup process of BSP and AP.
+BSP:
+start_kernel()
+  ->smp_init()
+     ->smp_boot_cpus()
+       ->do_boot_cpu()
+           ->start_ip = trampoline_address(); //set the address that AP will go 
+to execute
+           ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
+           ->for (timeout = 0; timeout < 50000; timeout++)
+               if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if AP 
+startup or not
+
+APs:
+ENTRY(trampoline_data) (trampoline_64.S)
+      ->ENTRY(secondary_startup_64) (head_64.S)
+         ->start_secondary() (smpboot.c)
+            ->cpu_init();
+            ->smp_callin();
+                ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP comes 
+here, the BSP will not prints the error message.
+
+From above call process, we can be sure that, the AP has been stuck between 
+trampoline_data and the cpumask_set_cpu() in
+smp_callin(), we look through these codes path carefully, and only found a 
+'hlt' instruct that could block the process.
+It is located in trampoline_data():
+
+ENTRY(trampoline_data)
+        ...
+
+        call    verify_cpu              # Verify the cpu supports long mode
+        testl   %eax, %eax              # Check for return code
+        jnz     no_longmode
+
+        ...
+
+no_longmode:
+        hlt
+        jmp no_longmode
+
+For the process verify_cpu(),
+we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
+No-root mode.
+This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
+the fail in verify_cpu.
+
+From the message in VM, we know vcpu1 and vcpu7 is something wrong.
+[    5.060042] CPU1: Stuck ??
+[   10.170815] CPU7: Stuck ??
+[   10.171648] Brought up 6 CPUs
+
+Besides, the follow is the cpus message got from host.
+80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
+instance-0000000
+* CPU #0: pc=0x00007f64160c683d thread_id=68570
+  CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+  CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+  CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+  CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+  CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+  CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+  CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+
+Oh, i also forgot to mention in the above message that, we have bond each vCPU 
+to different physical CPU in
+host.
+
+Thanks,
+zhanghailiang
+
+On 06/07/2015 11:59, zhanghailiang wrote:
+>
+>
+>
+Besides, the follow is the cpus message got from host.
+>
+80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
+>
+qemu-monitor-command instance-0000000
+>
+* CPU #0: pc=0x00007f64160c683d thread_id=68570
+>
+CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+>
+CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+>
+CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+>
+CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+>
+CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+>
+CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+>
+CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+>
+>
+Oh, i also forgot to mention in the above message that, we have bond
+>
+each vCPU to different physical CPU in
+>
+host.
+Can you capture a trace on the host (trace-cmd record -e kvm) and send
+it privately?  Please note which CPUs get stuck, since I guess it's not
+always 1 and 7.
+
+Paolo
+
+On Mon, 6 Jul 2015 17:59:10 +0800
+zhanghailiang <address@hidden> wrote:
+
+>
+On 2015/7/6 16:45, Paolo Bonzini wrote:
+>
+>
+>
+>
+>
+> On 06/07/2015 09:54, zhanghailiang wrote:
+>
+>>
+>
+>>  From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+>
+>> consuming any cpu (Should be in idle state),
+>
+>> All of VCPUs' stacks in host is like bellow:
+>
+>>
+>
+>> [<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+>
+>> [<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+>
+>> [<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+>
+>> [<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+>
+>> [<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+>
+>> [<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+>
+>> [<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+>
+>> [<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+>
+>> [<ffffffffffffffff>] 0xffffffffffffffff
+>
+>>
+>
+>> We looked into the kernel codes that could leading to the above 'Stuck'
+>
+>> warning,
+in current upstream there isn't any printk(...Stuck...) left since that code 
+path
+has been reworked.
+I've often seen this on over-committed host during guest CPUs up/down torture 
+test.
+Could you update guest kernel to upstream and see if issue reproduces?
+
+>
+>> and found that the only possible is the emulation of 'cpuid' instruct in
+>
+>> kvm/qemu has something wrong.
+>
+>> But since we can’t reproduce this problem, we are not quite sure.
+>
+>> Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+>
+>
+>
+> Can you explain the relationship to the cpuid emulation?  What do the
+>
+> traces say about vcpus 1 and 7?
+>
+>
+OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is
+>
+located in
+>
+do_boot_cpu(). It's in BSP context, the call process is:
+>
+BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu()
+>
+-> wakeup_secondary_via_INIT() to trigger APs.
+>
+It will wait 5s for APs to startup, if some AP not startup normally, it will
+>
+print 'CPU%d Stuck' or 'CPU%d: Not responding'.
+>
+>
+If it prints 'Stuck', it means the AP has received the SIPI interrupt and
+>
+begins to execute the code
+>
+'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places
+>
+before smp_callin()(smpboot.c).
+>
+The follow is the starup process of BSP and AP.
+>
+BSP:
+>
+start_kernel()
+>
+->smp_init()
+>
+->smp_boot_cpus()
+>
+->do_boot_cpu()
+>
+->start_ip = trampoline_address(); //set the address that AP will
+>
+go to execute
+>
+->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
+>
+->for (timeout = 0; timeout < 50000; timeout++)
+>
+if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if
+>
+AP startup or not
+>
+>
+APs:
+>
+ENTRY(trampoline_data) (trampoline_64.S)
+>
+->ENTRY(secondary_startup_64) (head_64.S)
+>
+->start_secondary() (smpboot.c)
+>
+->cpu_init();
+>
+->smp_callin();
+>
+->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP
+>
+comes here, the BSP will not prints the error message.
+>
+>
+From above call process, we can be sure that, the AP has been stuck between
+>
+trampoline_data and the cpumask_set_cpu() in
+>
+smp_callin(), we look through these codes path carefully, and only found a
+>
+'hlt' instruct that could block the process.
+>
+It is located in trampoline_data():
+>
+>
+ENTRY(trampoline_data)
+>
+...
+>
+>
+call    verify_cpu              # Verify the cpu supports long mode
+>
+testl   %eax, %eax              # Check for return code
+>
+jnz     no_longmode
+>
+>
+...
+>
+>
+no_longmode:
+>
+hlt
+>
+jmp no_longmode
+>
+>
+For the process verify_cpu(),
+>
+we can only find the 'cpuid' sensitive instruct that could lead VM exit from
+>
+No-root mode.
+>
+This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to
+>
+the fail in verify_cpu.
+>
+>
+From the message in VM, we know vcpu1 and vcpu7 is something wrong.
+>
+[    5.060042] CPU1: Stuck ??
+>
+[   10.170815] CPU7: Stuck ??
+>
+[   10.171648] Brought up 6 CPUs
+>
+>
+Besides, the follow is the cpus message got from host.
+>
+80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
+>
+qemu-monitor-command instance-0000000
+>
+* CPU #0: pc=0x00007f64160c683d thread_id=68570
+>
+CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+>
+CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+>
+CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+>
+CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+>
+CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+>
+CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+>
+CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+>
+>
+Oh, i also forgot to mention in the above message that, we have bond each
+>
+vCPU to different physical CPU in
+>
+host.
+>
+>
+Thanks,
+>
+zhanghailiang
+>
+>
+>
+>
+>
+--
+>
+To unsubscribe from this list: send the line "unsubscribe kvm" in
+>
+the body of a message to address@hidden
+>
+More majordomo info at
+http://vger.kernel.org/majordomo-info.html
+
+On 2015/7/7 19:23, Igor Mammedov wrote:
+On Mon, 6 Jul 2015 17:59:10 +0800
+zhanghailiang <address@hidden> wrote:
+On 2015/7/6 16:45, Paolo Bonzini wrote:
+On 06/07/2015 09:54, zhanghailiang wrote:
+From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+consuming any cpu (Should be in idle state),
+All of VCPUs' stacks in host is like bellow:
+
+[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+[<ffffffffffffffff>] 0xffffffffffffffff
+
+We looked into the kernel codes that could leading to the above 'Stuck'
+warning,
+in current upstream there isn't any printk(...Stuck...) left since that code 
+path
+has been reworked.
+I've often seen this on over-committed host during guest CPUs up/down torture 
+test.
+Could you update guest kernel to upstream and see if issue reproduces?
+Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to 
+reproduce it.
+
+For your test case, is it a kernel bug?
+Or is there any related patch could solve your test problem been merged into
+upstream ?
+
+Thanks,
+zhanghailiang
+and found that the only possible is the emulation of 'cpuid' instruct in
+kvm/qemu has something wrong.
+But since we can’t reproduce this problem, we are not quite sure.
+Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+Can you explain the relationship to the cpuid emulation?  What do the
+traces say about vcpus 1 and 7?
+OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
+located in
+do_boot_cpu(). It's in BSP context, the call process is:
+BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
+-> wakeup_secondary_via_INIT() to trigger APs.
+It will wait 5s for APs to startup, if some AP not startup normally, it will 
+print 'CPU%d Stuck' or 'CPU%d: Not responding'.
+
+If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
+begins to execute the code
+'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
+smp_callin()(smpboot.c).
+The follow is the starup process of BSP and AP.
+BSP:
+start_kernel()
+    ->smp_init()
+       ->smp_boot_cpus()
+         ->do_boot_cpu()
+             ->start_ip = trampoline_address(); //set the address that AP will 
+go to execute
+             ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
+             ->for (timeout = 0; timeout < 50000; timeout++)
+                 if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if 
+AP startup or not
+
+APs:
+ENTRY(trampoline_data) (trampoline_64.S)
+        ->ENTRY(secondary_startup_64) (head_64.S)
+           ->start_secondary() (smpboot.c)
+              ->cpu_init();
+              ->smp_callin();
+                  ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP 
+comes here, the BSP will not prints the error message.
+
+  From above call process, we can be sure that, the AP has been stuck between 
+trampoline_data and the cpumask_set_cpu() in
+smp_callin(), we look through these codes path carefully, and only found a 
+'hlt' instruct that could block the process.
+It is located in trampoline_data():
+
+ENTRY(trampoline_data)
+          ...
+
+        call    verify_cpu              # Verify the cpu supports long mode
+        testl   %eax, %eax              # Check for return code
+        jnz     no_longmode
+
+          ...
+
+no_longmode:
+        hlt
+        jmp no_longmode
+
+For the process verify_cpu(),
+we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
+No-root mode.
+This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
+the fail in verify_cpu.
+
+  From the message in VM, we know vcpu1 and vcpu7 is something wrong.
+[    5.060042] CPU1: Stuck ??
+[   10.170815] CPU7: Stuck ??
+[   10.171648] Brought up 6 CPUs
+
+Besides, the follow is the cpus message got from host.
+80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
+instance-0000000
+* CPU #0: pc=0x00007f64160c683d thread_id=68570
+    CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+    CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+    CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+    CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+    CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+    CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+    CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+
+Oh, i also forgot to mention in the above message that, we have bond each vCPU 
+to different physical CPU in
+host.
+
+Thanks,
+zhanghailiang
+
+
+
+
+--
+To unsubscribe from this list: send the line "unsubscribe kvm" in
+the body of a message to address@hidden
+More majordomo info at
+http://vger.kernel.org/majordomo-info.html
+.
+
+On Tue, 7 Jul 2015 19:43:35 +0800
+zhanghailiang <address@hidden> wrote:
+
+>
+On 2015/7/7 19:23, Igor Mammedov wrote:
+>
+> On Mon, 6 Jul 2015 17:59:10 +0800
+>
+> zhanghailiang <address@hidden> wrote:
+>
+>
+>
+>> On 2015/7/6 16:45, Paolo Bonzini wrote:
+>
+>>>
+>
+>>>
+>
+>>> On 06/07/2015 09:54, zhanghailiang wrote:
+>
+>>>>
+>
+>>>>   From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+>
+>>>> consuming any cpu (Should be in idle state),
+>
+>>>> All of VCPUs' stacks in host is like bellow:
+>
+>>>>
+>
+>>>> [<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+>
+>>>> [<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+>
+>>>> [<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+>
+>>>> [<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+>
+>>>> [<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+>
+>>>> [<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+>
+>>>> [<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+>
+>>>> [<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+>
+>>>> [<ffffffffffffffff>] 0xffffffffffffffff
+>
+>>>>
+>
+>>>> We looked into the kernel codes that could leading to the above 'Stuck'
+>
+>>>> warning,
+>
+> in current upstream there isn't any printk(...Stuck...) left since that
+>
+> code path
+>
+> has been reworked.
+>
+> I've often seen this on over-committed host during guest CPUs up/down
+>
+> torture test.
+>
+> Could you update guest kernel to upstream and see if issue reproduces?
+>
+>
+>
+>
+Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to
+>
+reproduce it.
+>
+>
+For your test case, is it a kernel bug?
+>
+Or is there any related patch could solve your test problem been merged into
+>
+upstream ?
+I don't remember all prerequisite patches but you should be able to find
+http://marc.info/?l=linux-kernel&m=140326703108009&w=2
+"x86/smpboot: Initialize secondary CPU only if master CPU will wait for it"
+and then look for dependencies.
+
+
+>
+>
+Thanks,
+>
+zhanghailiang
+>
+>
+>>>> and found that the only possible is the emulation of 'cpuid' instruct in
+>
+>>>> kvm/qemu has something wrong.
+>
+>>>> But since we can’t reproduce this problem, we are not quite sure.
+>
+>>>> Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+>
+>>>
+>
+>>> Can you explain the relationship to the cpuid emulation?  What do the
+>
+>>> traces say about vcpus 1 and 7?
+>
+>>
+>
+>> OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is
+>
+>> located in
+>
+>> do_boot_cpu(). It's in BSP context, the call process is:
+>
+>> BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() ->
+>
+>> do_boot_cpu() -> wakeup_secondary_via_INIT() to trigger APs.
+>
+>> It will wait 5s for APs to startup, if some AP not startup normally, it
+>
+>> will print 'CPU%d Stuck' or 'CPU%d: Not responding'.
+>
+>>
+>
+>> If it prints 'Stuck', it means the AP has received the SIPI interrupt and
+>
+>> begins to execute the code
+>
+>> 'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places
+>
+>> before smp_callin()(smpboot.c).
+>
+>> The follow is the starup process of BSP and AP.
+>
+>> BSP:
+>
+>> start_kernel()
+>
+>>     ->smp_init()
+>
+>>        ->smp_boot_cpus()
+>
+>>          ->do_boot_cpu()
+>
+>>              ->start_ip = trampoline_address(); //set the address that AP
+>
+>> will go to execute
+>
+>>              ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
+>
+>>              ->for (timeout = 0; timeout < 50000; timeout++)
+>
+>>                  if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;//
+>
+>> check if AP startup or not
+>
+>>
+>
+>> APs:
+>
+>> ENTRY(trampoline_data) (trampoline_64.S)
+>
+>>         ->ENTRY(secondary_startup_64) (head_64.S)
+>
+>>            ->start_secondary() (smpboot.c)
+>
+>>               ->cpu_init();
+>
+>>               ->smp_callin();
+>
+>>                   ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP
+>
+>> comes here, the BSP will not prints the error message.
+>
+>>
+>
+>>   From above call process, we can be sure that, the AP has been stuck
+>
+>> between trampoline_data and the cpumask_set_cpu() in
+>
+>> smp_callin(), we look through these codes path carefully, and only found a
+>
+>> 'hlt' instruct that could block the process.
+>
+>> It is located in trampoline_data():
+>
+>>
+>
+>> ENTRY(trampoline_data)
+>
+>>           ...
+>
+>>
+>
+>>    call    verify_cpu              # Verify the cpu supports long mode
+>
+>>    testl   %eax, %eax              # Check for return code
+>
+>>    jnz     no_longmode
+>
+>>
+>
+>>           ...
+>
+>>
+>
+>> no_longmode:
+>
+>>    hlt
+>
+>>    jmp no_longmode
+>
+>>
+>
+>> For the process verify_cpu(),
+>
+>> we can only find the 'cpuid' sensitive instruct that could lead VM exit
+>
+>> from No-root mode.
+>
+>> This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading
+>
+>> to the fail in verify_cpu.
+>
+>>
+>
+>>   From the message in VM, we know vcpu1 and vcpu7 is something wrong.
+>
+>> [    5.060042] CPU1: Stuck ??
+>
+>> [   10.170815] CPU7: Stuck ??
+>
+>> [   10.171648] Brought up 6 CPUs
+>
+>>
+>
+>> Besides, the follow is the cpus message got from host.
+>
+>> 80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh
+>
+>> qemu-monitor-command instance-0000000
+>
+>> * CPU #0: pc=0x00007f64160c683d thread_id=68570
+>
+>>     CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+>
+>>     CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+>
+>>     CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+>
+>>     CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+>
+>>     CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+>
+>>     CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+>
+>>     CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+>
+>>
+>
+>> Oh, i also forgot to mention in the above message that, we have bond each
+>
+>> vCPU to different physical CPU in
+>
+>> host.
+>
+>>
+>
+>> Thanks,
+>
+>> zhanghailiang
+>
+>>
+>
+>>
+>
+>>
+>
+>>
+>
+>> --
+>
+>> To unsubscribe from this list: send the line "unsubscribe kvm" in
+>
+>> the body of a message to address@hidden
+>
+>> More majordomo info at
+http://vger.kernel.org/majordomo-info.html
+>
+>
+>
+>
+>
+> .
+>
+>
+>
+>
+>
+
+On 2015/7/7 20:21, Igor Mammedov wrote:
+On Tue, 7 Jul 2015 19:43:35 +0800
+zhanghailiang <address@hidden> wrote:
+On 2015/7/7 19:23, Igor Mammedov wrote:
+On Mon, 6 Jul 2015 17:59:10 +0800
+zhanghailiang <address@hidden> wrote:
+On 2015/7/6 16:45, Paolo Bonzini wrote:
+On 06/07/2015 09:54, zhanghailiang wrote:
+From host, we found that QEMU vcpu1 thread and vcpu7 thread were not
+consuming any cpu (Should be in idle state),
+All of VCPUs' stacks in host is like bellow:
+
+[<ffffffffa07089b5>] kvm_vcpu_block+0x65/0xa0 [kvm]
+[<ffffffffa071c7c1>] __vcpu_run+0xd1/0x260 [kvm]
+[<ffffffffa071d508>] kvm_arch_vcpu_ioctl_run+0x68/0x1a0 [kvm]
+[<ffffffffa0709cee>] kvm_vcpu_ioctl+0x38e/0x580 [kvm]
+[<ffffffff8116be8b>] do_vfs_ioctl+0x8b/0x3b0
+[<ffffffff8116c251>] sys_ioctl+0xa1/0xb0
+[<ffffffff81468092>] system_call_fastpath+0x16/0x1b
+[<00002ab9fe1f99a7>] 0x2ab9fe1f99a7
+[<ffffffffffffffff>] 0xffffffffffffffff
+
+We looked into the kernel codes that could leading to the above 'Stuck'
+warning,
+in current upstream there isn't any printk(...Stuck...) left since that code 
+path
+has been reworked.
+I've often seen this on over-committed host during guest CPUs up/down torture 
+test.
+Could you update guest kernel to upstream and see if issue reproduces?
+Hmm, Unfortunately, it is very hard to reproduce, and we are still trying to 
+reproduce it.
+
+For your test case, is it a kernel bug?
+Or is there any related patch could solve your test problem been merged into
+upstream ?
+I don't remember all prerequisite patches but you should be able to find
+http://marc.info/?l=linux-kernel&m=140326703108009&w=2
+"x86/smpboot: Initialize secondary CPU only if master CPU will wait for it"
+and then look for dependencies.
+Er, we have investigated this patch, and it is not related to our problem, :)
+
+Thanks.
+Thanks,
+zhanghailiang
+and found that the only possible is the emulation of 'cpuid' instruct in
+kvm/qemu has something wrong.
+But since we can’t reproduce this problem, we are not quite sure.
+Is there any possible that the cupid emulation in kvm/qemu has some bug ?
+Can you explain the relationship to the cpuid emulation?  What do the
+traces say about vcpus 1 and 7?
+OK, we searched the VM's kernel codes with the 'Stuck' message, and  it is 
+located in
+do_boot_cpu(). It's in BSP context, the call process is:
+BSP executes start_kernel() -> smp_init() -> smp_boot_cpus() -> do_boot_cpu() 
+-> wakeup_secondary_via_INIT() to trigger APs.
+It will wait 5s for APs to startup, if some AP not startup normally, it will 
+print 'CPU%d Stuck' or 'CPU%d: Not responding'.
+
+If it prints 'Stuck', it means the AP has received the SIPI interrupt and 
+begins to execute the code
+'ENTRY(trampoline_data)' (trampoline_64.S) , but be stuck in some places before 
+smp_callin()(smpboot.c).
+The follow is the starup process of BSP and AP.
+BSP:
+start_kernel()
+     ->smp_init()
+        ->smp_boot_cpus()
+          ->do_boot_cpu()
+              ->start_ip = trampoline_address(); //set the address that AP will 
+go to execute
+              ->wakeup_secondary_cpu_via_init(); // kick the secondary CPU
+              ->for (timeout = 0; timeout < 50000; timeout++)
+                  if (cpumask_test_cpu(cpu, cpu_callin_mask)) break;// check if 
+AP startup or not
+
+APs:
+ENTRY(trampoline_data) (trampoline_64.S)
+         ->ENTRY(secondary_startup_64) (head_64.S)
+            ->start_secondary() (smpboot.c)
+               ->cpu_init();
+               ->smp_callin();
+                   ->cpumask_set_cpu(cpuid, cpu_callin_mask); ->Note: if AP 
+comes here, the BSP will not prints the error message.
+
+   From above call process, we can be sure that, the AP has been stuck between 
+trampoline_data and the cpumask_set_cpu() in
+smp_callin(), we look through these codes path carefully, and only found a 
+'hlt' instruct that could block the process.
+It is located in trampoline_data():
+
+ENTRY(trampoline_data)
+           ...
+
+        call    verify_cpu              # Verify the cpu supports long mode
+        testl   %eax, %eax              # Check for return code
+        jnz     no_longmode
+
+           ...
+
+no_longmode:
+        hlt
+        jmp no_longmode
+
+For the process verify_cpu(),
+we can only find the 'cpuid' sensitive instruct that could lead VM exit from 
+No-root mode.
+This is why we doubt if cpuid emulation is wrong in KVM/QEMU that leading to 
+the fail in verify_cpu.
+
+   From the message in VM, we know vcpu1 and vcpu7 is something wrong.
+[    5.060042] CPU1: Stuck ??
+[   10.170815] CPU7: Stuck ??
+[   10.171648] Brought up 6 CPUs
+
+Besides, the follow is the cpus message got from host.
+80FF72F5-FF6D-E411-A8C8-000000821800:/home/fsp/hrg # virsh qemu-monitor-command 
+instance-0000000
+* CPU #0: pc=0x00007f64160c683d thread_id=68570
+     CPU #1: pc=0xffffffff810301f1 (halted) thread_id=68573
+     CPU #2: pc=0xffffffff810301e2 (halted) thread_id=68575
+     CPU #3: pc=0xffffffff810301e2 (halted) thread_id=68576
+     CPU #4: pc=0xffffffff810301e2 (halted) thread_id=68577
+     CPU #5: pc=0xffffffff810301e2 (halted) thread_id=68578
+     CPU #6: pc=0xffffffff810301e2 (halted) thread_id=68583
+     CPU #7: pc=0xffffffff810301f1 (halted) thread_id=68584
+
+Oh, i also forgot to mention in the above message that, we have bond each vCPU 
+to different physical CPU in
+host.
+
+Thanks,
+zhanghailiang
+
+
+
+
+--
+To unsubscribe from this list: send the line "unsubscribe kvm" in
+the body of a message to address@hidden
+More majordomo info at
+http://vger.kernel.org/majordomo-info.html
+.
+.
+
diff --git a/results/classifier/zero-shot/010/review/26095107 b/results/classifier/zero-shot/010/review/26095107
new file mode 100644
index 00000000..8fff01ee
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/26095107
@@ -0,0 +1,182 @@
+permissions: 0.993
+debug: 0.993
+files: 0.989
+PID: 0.988
+device: 0.988
+performance: 0.987
+socket: 0.987
+boot: 0.987
+KVM: 0.985
+other: 0.979
+semantic: 0.974
+vnc: 0.972
+graphic: 0.955
+network: 0.879
+KVM: 0.987
+debug: 0.905
+PID: 0.046
+other: 0.028
+files: 0.026
+device: 0.022
+socket: 0.014
+semantic: 0.012
+performance: 0.012
+network: 0.010
+graphic: 0.003
+boot: 0.003
+vnc: 0.002
+permissions: 0.002
+
+[Qemu-devel]  [Bug Report] vm paused after succeeding to migrate
+
+Hi, all
+I encounterd a bug when I try to migrate a windows vm.
+
+Enviroment information:
+host A: cpu E5620(model WestmereEP without flag xsave)
+host B: cpu E5-2643(model SandyBridgeEP with xsave)
+
+The reproduce steps is :
+1. Start a windows 2008 vm with -cpu host(which means host-passthrough).
+2. Migrate the vm to host B when cr4.OSXSAVE=0 (successfully).
+3. Vm runs on host B for a while so that cr4.OSXSAVE changes to 1.
+4. Then migrate the vm to host A (successfully), but vm was paused, and qemu 
+printed log as followed:
+
+KVM: entry failed, hardware error 0x80000021
+
+If you're running a guest on an Intel machine without unrestricted mode
+support, the failure can be most likely due to the guest entering an invalid
+state for Intel VT. For example, the guest maybe running in big real mode
+which is not supported on less recent Intel processors.
+
+EAX=019b3bb0 EBX=01a3ae80 ECX=01a61ce8 EDX=00000000
+ESI=01a62000 EDI=00000000 EBP=00000000 ESP=01718b20
+EIP=0185d982 EFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
+ES =0000 00000000 0000ffff 00009300
+CS =f000 ffff0000 0000ffff 00009b00
+SS =0000 00000000 0000ffff 00009300
+DS =0000 00000000 0000ffff 00009300
+FS =0000 00000000 0000ffff 00009300
+GS =0000 00000000 0000ffff 00009300
+LDT=0000 00000000 0000ffff 00008200
+TR =0000 00000000 0000ffff 00008b00
+GDT=     00000000 0000ffff
+IDT=     00000000 0000ffff
+CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
+DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 
+DR3=0000000000000000
+DR6=00000000ffff0ff0 DR7=0000000000000400
+EFER=0000000000000000
+Code=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00 00 
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
+I have found that problem happened when kvm_put_sregs returns err -22(called by 
+kvm_arch_put_registers(qemu)).
+Because kvm_arch_vcpu_ioctl_set_sregs(kvm-mod) checked that guest_cpuid_has no 
+X86_FEATURE_XSAVE but cr4.OSXSAVE=1.
+So should we cancel migration when kvm_arch_put_registers returns error?
+
+* linzhecheng (address@hidden) wrote:
+>
+Hi, all
+>
+I encounterd a bug when I try to migrate a windows vm.
+>
+>
+Enviroment information:
+>
+host A: cpu E5620(model WestmereEP without flag xsave)
+>
+host B: cpu E5-2643(model SandyBridgeEP with xsave)
+>
+>
+The reproduce steps is :
+>
+1. Start a windows 2008 vm with -cpu host(which means host-passthrough).
+>
+2. Migrate the vm to host B when cr4.OSXSAVE=0 (successfully).
+>
+3. Vm runs on host B for a while so that cr4.OSXSAVE changes to 1.
+>
+4. Then migrate the vm to host A (successfully), but vm was paused, and qemu
+>
+printed log as followed:
+Remember that migrating using -cpu host  across different CPU models is NOT
+expected to work.
+
+>
+KVM: entry failed, hardware error 0x80000021
+>
+>
+If you're running a guest on an Intel machine without unrestricted mode
+>
+support, the failure can be most likely due to the guest entering an invalid
+>
+state for Intel VT. For example, the guest maybe running in big real mode
+>
+which is not supported on less recent Intel processors.
+>
+>
+EAX=019b3bb0 EBX=01a3ae80 ECX=01a61ce8 EDX=00000000
+>
+ESI=01a62000 EDI=00000000 EBP=00000000 ESP=01718b20
+>
+EIP=0185d982 EFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
+>
+ES =0000 00000000 0000ffff 00009300
+>
+CS =f000 ffff0000 0000ffff 00009b00
+>
+SS =0000 00000000 0000ffff 00009300
+>
+DS =0000 00000000 0000ffff 00009300
+>
+FS =0000 00000000 0000ffff 00009300
+>
+GS =0000 00000000 0000ffff 00009300
+>
+LDT=0000 00000000 0000ffff 00008200
+>
+TR =0000 00000000 0000ffff 00008b00
+>
+GDT=     00000000 0000ffff
+>
+IDT=     00000000 0000ffff
+>
+CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
+>
+DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
+>
+DR3=0000000000000000
+>
+DR6=00000000ffff0ff0 DR7=0000000000000400
+>
+EFER=0000000000000000
+>
+Code=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00
+>
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+>
+00
+>
+>
+I have found that problem happened when kvm_put_sregs returns err -22(called
+>
+by kvm_arch_put_registers(qemu)).
+>
+Because kvm_arch_vcpu_ioctl_set_sregs(kvm-mod) checked that guest_cpuid_has
+>
+no X86_FEATURE_XSAVE but cr4.OSXSAVE=1.
+>
+So should we cancel migration when kvm_arch_put_registers returns error?
+It would seem good if we can make the migration fail there rather than
+hitting that KVM error.
+It looks like we need to do a bit of plumbing to convert the places that
+call it to return a bool rather than void.
+
+Dave
+
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
diff --git a/results/classifier/zero-shot/010/review/26430026 b/results/classifier/zero-shot/010/review/26430026
new file mode 100644
index 00000000..b661cb52
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/26430026
@@ -0,0 +1,189 @@
+permissions: 0.937
+debug: 0.925
+KVM: 0.919
+semantic: 0.904
+device: 0.904
+performance: 0.898
+PID: 0.894
+vnc: 0.893
+files: 0.879
+graphic: 0.862
+boot: 0.841
+socket: 0.817
+other: 0.813
+network: 0.758
+debug: 0.885
+device: 0.061
+other: 0.037
+boot: 0.032
+files: 0.021
+semantic: 0.020
+PID: 0.012
+KVM: 0.008
+socket: 0.003
+vnc: 0.002
+graphic: 0.001
+network: 0.001
+performance: 0.001
+permissions: 0.001
+
+[BUG] cxl,i386: e820 mappings may not be correct for cxl
+
+Context included below from prior discussion
+    - `cxl create-region` would fail on inability to allocate memory
+    - traced this down to the memory region being marked RESERVED
+    - E820 map marks the CXL fixed memory window as RESERVED
+
+
+Re: x86 errors, I found that region worked with this patch. (I also
+added the SRAT patches the Davidlohr posted, but I do not think they are
+relevant).
+
+I don't think this is correct, and setting this to E820_RAM causes the
+system to fail to boot at all, but with this change `cxl create-region`
+succeeds, which suggests our e820 mappings in the i386 machine are
+incorrect.
+
+Anyone who can help or have an idea as to what e820 should actually be
+doing with this region, or if this is correct and something else is
+failing, please help!
+
+
+diff --git a/hw/i386/pc.c b/hw/i386/pc.c
+index 566accf7e6..a5e688a742 100644
+--- a/hw/i386/pc.c
++++ b/hw/i386/pc.c
+@@ -1077,7 +1077,7 @@ void pc_memory_init(PCMachineState *pcms,
+                 memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
+                                       "cxl-fixed-memory-region", fw->size);
+                 memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+-                e820_add_entry(fw->base, fw->size, E820_RESERVED);
++                e820_add_entry(fw->base, fw->size, E820_NVS);
+                 cxl_fmw_base += fw->size;
+                 cxl_resv_end = cxl_fmw_base;
+             }
+
+
+On Mon, Oct 10, 2022 at 05:32:42PM +0100, Jonathan Cameron wrote:
+>
+>
+> > but i'm not sure of what to do with this info.  We have some proof
+>
+> > that real hardware works with this no problem, and the only difference
+>
+> > is that the EFI/bios/firmware is setting the memory regions as `usable`
+>
+> > or `soft reserved`, which would imply the EDK2 is the blocker here
+>
+> > regardless of the OS driver status.
+>
+> >
+>
+> > But I'd seen elsewhere you had gotten some of this working, and I'm
+>
+> > failing to get anything working at the moment.  If you have any input i
+>
+> > would greatly appreciate the help.
+>
+> >
+>
+> > QEMU config:
+>
+> >
+>
+> > /opt/qemu-cxl2/bin/qemu-system-x86_64 \
+>
+> > -drive
+>
+> > file=/var/lib/libvirt/images/cxl.qcow2,format=qcow2,index=0,media=d\
+>
+> > -m 2G,slots=4,maxmem=4G \
+>
+> > -smp 4 \
+>
+> > -machine type=q35,accel=kvm,cxl=on \
+>
+> > -enable-kvm \
+>
+> > -nographic \
+>
+> > -device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 \
+>
+> > -device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 \
+>
+> > -object memory-backend-file,id=cxl-mem0,mem-path=/tmp/cxl-mem0,size=256M \
+>
+> > -object memory-backend-file,id=lsa0,mem-path=/tmp/cxl-lsa0,size=256M \
+>
+> > -device cxl-type3,bus=rp0,pmem=true,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0
+>
+> > \
+>
+> > -M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=256M
+>
+> >
+>
+> > I'd seen on the lists that you had seen issues with single-rp setups,
+>
+> > but no combination of configuration I've tried (including all the ones
+>
+> > in the docs and tests) lead to a successful region creation with
+>
+> > `cxl create-region`
+>
+>
+>
+> Hmm. Let me have a play.  I've not run x86 tests for a while so
+>
+> perhaps something is missing there.
+>
+>
+>
+> I'm carrying a patch to override check_last_peer() in
+>
+> cxl_port_setup_targets() as that is wrong for some combinations,
+>
+> but that doesn't look like it's related to what you are seeing.
+>
+>
+I'm not sure if it's relevant, but turned out I'd forgotten I'm carrying 3
+>
+patches that aren't upstream (and one is a horrible hack).
+>
+>
+Hack:
+https://lore.kernel.org/linux-cxl/20220819094655.000005ed@huawei.com/
+>
+Shouldn't affect a simple case like this...
+>
+>
+https://lore.kernel.org/linux-cxl/20220819093133.00006c22@huawei.com/T/#t
+>
+(Dan's version)
+>
+>
+https://lore.kernel.org/linux-cxl/20220815154044.24733-1-Jonathan.Cameron@huawei.com/T/#t
+>
+>
+For writes to work you will currently need two rps (nothing on the second is
+>
+fine)
+>
+as we still haven't resolved if the kernel should support an HDM decoder on
+>
+a host bridge with one port.  I think it should (Spec allows it), others
+>
+unconvinced.
+>
+>
+Note I haven't shifted over to x86 yet so may still be something different
+>
+from
+>
+arm64.
+>
+>
+Jonathan
+>
+>
+
diff --git a/results/classifier/zero-shot/010/review/28596630 b/results/classifier/zero-shot/010/review/28596630
new file mode 100644
index 00000000..11131162
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/28596630
@@ -0,0 +1,137 @@
+device: 0.835
+semantic: 0.814
+performance: 0.797
+permissions: 0.791
+graphic: 0.785
+network: 0.780
+PID: 0.750
+other: 0.707
+debug: 0.704
+socket: 0.697
+vnc: 0.674
+KVM: 0.649
+files: 0.630
+boot: 0.609
+debug: 0.492
+files: 0.270
+other: 0.128
+PID: 0.035
+socket: 0.033
+device: 0.026
+network: 0.020
+vnc: 0.016
+performance: 0.015
+boot: 0.013
+semantic: 0.009
+KVM: 0.005
+permissions: 0.004
+graphic: 0.002
+
+[Qemu-devel] [BUG] [low severity] a strange appearance of message involving slirp while doing "empty" make
+
+Folks,
+
+If qemu tree is already fully built, and "make" is attempted, for 3.1, the 
+outcome is:
+
+$ make
+        CHK version_gen.h
+$
+
+For 4.0-rc0, the outcome seems to be different:
+
+$ make
+make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+make[1]: Nothing to be done for 'all'.
+make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+        CHK version_gen.h
+$
+
+Not sure how significant is that, but I report it just in case.
+
+Yours,
+Aleksandar
+
+On 20/03/2019 22.08, Aleksandar Markovic wrote:
+>
+Folks,
+>
+>
+If qemu tree is already fully built, and "make" is attempted, for 3.1, the
+>
+outcome is:
+>
+>
+$ make
+>
+CHK version_gen.h
+>
+$
+>
+>
+For 4.0-rc0, the outcome seems to be different:
+>
+>
+$ make
+>
+make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+>
+make[1]: Nothing to be done for 'all'.
+>
+make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+>
+CHK version_gen.h
+>
+$
+>
+>
+Not sure how significant is that, but I report it just in case.
+It's likely because slirp is currently being reworked to become a
+separate project, so the makefiles have been changed a little bit. I
+guess the message will go away again once slirp has become a stand-alone
+library.
+
+ Thomas
+
+On Fri, 22 Mar 2019 at 04:59, Thomas Huth <address@hidden> wrote:
+>
+On 20/03/2019 22.08, Aleksandar Markovic wrote:
+>
+> $ make
+>
+> make[1]: Entering directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+>
+> make[1]: Nothing to be done for 'all'.
+>
+> make[1]: Leaving directory '/home/build/malta-mips64r6/qemu-4.0/slirp'
+>
+>       CHK version_gen.h
+>
+> $
+>
+>
+>
+> Not sure how significant is that, but I report it just in case.
+>
+>
+It's likely because slirp is currently being reworked to become a
+>
+separate project, so the makefiles have been changed a little bit. I
+>
+guess the message will go away again once slirp has become a stand-alone
+>
+library.
+Well, we'll still need to ship slirp for the foreseeable future...
+
+I think the cause of this is that the rule in Makefile for
+calling the slirp Makefile is not passing it $(SUBDIR_MAKEFLAGS)
+like all the other recursive make invocations. If we do that
+then we'll suppress the entering/leaving messages for
+non-verbose builds. (Some tweaking will be needed as
+it looks like the slirp makefile has picked an incompatible
+meaning for $BUILD_DIR, which the SUBDIR_MAKEFLAGS will
+also be passing to it.)
+
+thanks
+-- PMM
+
diff --git a/results/classifier/zero-shot/010/review/30680944 b/results/classifier/zero-shot/010/review/30680944
new file mode 100644
index 00000000..7904e3cd
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/30680944
@@ -0,0 +1,619 @@
+graphic: 0.965
+semantic: 0.953
+other: 0.944
+performance: 0.937
+debug: 0.936
+device: 0.935
+permissions: 0.933
+PID: 0.913
+socket: 0.864
+boot: 0.840
+files: 0.835
+vnc: 0.815
+network: 0.813
+KVM: 0.701
+debug: 0.994
+files: 0.057
+PID: 0.020
+other: 0.013
+device: 0.013
+network: 0.007
+performance: 0.007
+socket: 0.005
+semantic: 0.004
+vnc: 0.002
+graphic: 0.002
+permissions: 0.002
+boot: 0.001
+KVM: 0.001
+
+[BUG]QEMU jump into interrupt when single-stepping on aarch64
+
+Dear, folks,
+
+I try to debug Linux kernel with QEMU in single-stepping mode on aarch64 
+platform,
+the added breakpoint hits but after I type `step`, the gdb always jumps into 
+interrupt.
+
+My env:
+
+        gdb-10.2
+        qemu-6.2.0
+        host kernel: 5.10.84
+        VM kernel: 5.10.84
+
+The steps to reproduce:
+        # host console: run a VM with only one core, the import arg: <qemu:arg 
+value='-s'/>
+        # details can be found here:
+https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
+virsh create dev_core0.xml
+        
+        # run gdb client
+        gdb ./vmlinux
+
+        # gdb client on host console
+        (gdb) dir 
+./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
+        (gdb) target remote localhost:1234
+        (gdb) info b
+        Num     Type           Disp Enb Address            What
+        1       breakpoint     keep y   <MULTIPLE>
+        1.1                         y   0xffff800010361444 
+mm/memory-failure.c:1318
+        1.2                         y   0xffff800010361450 in memory_failure
+                                                   at mm/memory-failure.c:1488
+        (gdb) c
+        Continuing.
+
+        # console in VM, use madvise to inject a hwposion at virtual address 
+vaddr,
+        # which will hit the b inmemory_failur: madvise(vaddr, pagesize, 
+MADV_HWPOISON);
+        # and the VM pause
+        ./run_madvise.c
+
+        # gdb client on host console
+        (gdb)
+        Continuing.
+        Breakpoint 1, 0xffff800010361444 in memory_failure () at 
+mm/memory-failure.c:1318
+        1318                    res = -EHWPOISON;
+        (gdb) n
+        vectors () at arch/arm64/kernel/entry.S:552
+        552             kernel_ventry   1, irq                          // IRQ 
+EL1h
+        (gdb) n
+        (gdb) n
+        (gdb) n
+        (gdb) n
+        gic_handle_irq (regs=0xffff8000147c3b80) at 
+drivers/irqchip/irq-gic-v3.c:721
+        # after several step, I got the irqnr
+        (gdb) p irqnr
+        $5 = 8262
+
+Sometimes, the irqnr is 27， which is used for arch_timer.
+
+I was wondering do you have any comments on this? And feedback are welcomed.
+
+Thank you.
+
+Best Regards.
+Shuai
+
+On 4/6/22 09:30, Shuai Xue wrote:
+Dear, folks,
+
+I try to debug Linux kernel with QEMU in single-stepping mode on aarch64 
+platform,
+the added breakpoint hits but after I type `step`, the gdb always jumps into 
+interrupt.
+
+My env:
+
+        gdb-10.2
+        qemu-6.2.0
+        host kernel: 5.10.84
+        VM kernel: 5.10.84
+
+The steps to reproduce:
+        # host console: run a VM with only one core, the import arg: <qemu:arg 
+value='-s'/>
+        # details can be found here:
+https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
+virsh create dev_core0.xml
+        
+        # run gdb client
+        gdb ./vmlinux
+
+        # gdb client on host console
+        (gdb) dir 
+./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
+        (gdb) target remote localhost:1234
+        (gdb) info b
+        Num     Type           Disp Enb Address            What
+        1       breakpoint     keep y   <MULTIPLE>
+        1.1                         y   0xffff800010361444 
+mm/memory-failure.c:1318
+        1.2                         y   0xffff800010361450 in memory_failure
+                                                    at mm/memory-failure.c:1488
+        (gdb) c
+        Continuing.
+
+        # console in VM, use madvise to inject a hwposion at virtual address 
+vaddr,
+        # which will hit the b inmemory_failur: madvise(vaddr, pagesize, 
+MADV_HWPOISON);
+        # and the VM pause
+        ./run_madvise.c
+
+        # gdb client on host console
+        (gdb)
+        Continuing.
+        Breakpoint 1, 0xffff800010361444 in memory_failure () at 
+mm/memory-failure.c:1318
+        1318                    res = -EHWPOISON;
+        (gdb) n
+        vectors () at arch/arm64/kernel/entry.S:552
+        552             kernel_ventry   1, irq                          // IRQ 
+EL1h
+The 'n' command is not a single-step: use stepi, which will suppress interrupts.
+Anyway, not a bug.
+
+r~
+
+在 2022/4/7 AM12:57, Richard Henderson 写道:
+>
+On 4/6/22 09:30, Shuai Xue wrote:
+>
+> Dear, folks,
+>
+>
+>
+> I try to debug Linux kernel with QEMU in single-stepping mode on aarch64
+>
+> platform,
+>
+> the added breakpoint hits but after I type `step`, the gdb always jumps into
+>
+> interrupt.
+>
+>
+>
+> My env:
+>
+>
+>
+>     gdb-10.2
+>
+>     qemu-6.2.0
+>
+>     host kernel: 5.10.84
+>
+>     VM kernel: 5.10.84
+>
+>
+>
+> The steps to reproduce:
+>
+>     # host console: run a VM with only one core, the import arg: <qemu:arg
+>
+> value='-s'/>
+>
+>     # details can be found here:
+>
+>
+https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
+>
+>     virsh create dev_core0.xml
+>
+>    Â
+>
+>     # run gdb client
+>
+>     gdb ./vmlinux
+>
+>
+>
+>     # gdb client on host console
+>
+>     (gdb) dir
+>
+> ./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
+>
+>     (gdb) target remote localhost:1234
+>
+>     (gdb) info b
+>
+>     Num     Type           Disp Enb Address            What
+>
+>     1       breakpoint     keep y   <MULTIPLE>
+>
+>     1.1                         y   0xffff800010361444
+>
+> mm/memory-failure.c:1318
+>
+>     1.2                         y   0xffff800010361450 in memory_failure
+>
+>                                                     at
+>
+> mm/memory-failure.c:1488
+>
+>     (gdb) c
+>
+>     Continuing.
+>
+>
+>
+>     # console in VM, use madvise to inject a hwposion at virtual address
+>
+> vaddr,
+>
+>     # which will hit the b inmemory_failur: madvise(vaddr, pagesize,
+>
+> MADV_HWPOISON);
+>
+>     # and the VM pause
+>
+>     ./run_madvise.c
+>
+>
+>
+>     # gdb client on host console
+>
+>     (gdb)
+>
+>     Continuing.
+>
+>     Breakpoint 1, 0xffff800010361444 in memory_failure () at
+>
+> mm/memory-failure.c:1318
+>
+>     1318                    res = -EHWPOISON;
+>
+>     (gdb) n
+>
+>     vectors () at arch/arm64/kernel/entry.S:552
+>
+>     552             kernel_ventry   1, irq                          // IRQ
+>
+> EL1h
+>
+>
+The 'n' command is not a single-step: use stepi, which will suppress
+>
+interrupts.
+>
+Anyway, not a bug.
+>
+>
+r~
+Hi, Richard,
+
+Thank you for your quick reply, I also try `stepi`, but it does NOT work either.
+
+        (gdb) c
+        Continuing.
+
+        Breakpoint 1, memory_failure (pfn=1273982, flags=1) at 
+mm/memory-failure.c:1488
+        1488    {
+        (gdb) stepi
+        vectors () at arch/arm64/kernel/entry.S:552
+        552             kernel_ventry   1, irq                          // IRQ 
+EL1h
+
+According to QEMU doc[1]: the default single stepping behavior is step with the 
+IRQs
+and timer service routines off. I checked the MASK bits used to control the 
+single
+stepping IE on my machine as bellow:
+
+        # gdb client on host (x86 plafrom)
+        (gdb) maintenance packet qqemu.sstepbits
+        sending: "qqemu.sstepbits"
+        received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
+
+The sstep MASK looks as expected, but does not work as expected.
+
+I also try the same kernel and qemu version on X86 platform:
+>
+>     gdb-10.2
+>
+>     qemu-6.2.0
+>
+>     host kernel: 5.10.84
+>
+>     VM kernel: 5.10.84
+The command `n` jumps to the next instruction.
+
+        # gdb client on host (x86 plafrom)
+        (gdb) b memory-failure.c:1488
+        Breakpoint 1, memory_failure (pfn=1128931, flags=1) at 
+mm/memory-failure.c:1488
+        1488    {
+        (gdb) n
+        1497            if (!sysctl_memory_failure_recovery)
+        (gdb) stepi
+        0xffffffff812efdbc      1497            if 
+(!sysctl_memory_failure_recovery)
+        (gdb) stepi
+        0xffffffff812efdbe      1497            if 
+(!sysctl_memory_failure_recovery)
+        (gdb) n
+        1500            p = pfn_to_online_page(pfn);
+        (gdb) l
+        1496
+        1497            if (!sysctl_memory_failure_recovery)
+        1498                    panic("Memory failure on page %lx", pfn);
+        1499
+        1500            p = pfn_to_online_page(pfn);
+        1501            if (!p) {
+
+Best Regrades,
+Shuai
+
+
+[1]
+https://github.com/qemu/qemu/blob/master/docs/system/gdb.rst
+
+在 2022/4/7 PM12:10, Shuai Xue 写道:
+>
+在 2022/4/7 AM12:57, Richard Henderson 写道:
+>
+> On 4/6/22 09:30, Shuai Xue wrote:
+>
+>> Dear, folks,
+>
+>>
+>
+>> I try to debug Linux kernel with QEMU in single-stepping mode on aarch64
+>
+>> platform,
+>
+>> the added breakpoint hits but after I type `step`, the gdb always jumps
+>
+>> into interrupt.
+>
+>>
+>
+>> My env:
+>
+>>
+>
+>>     gdb-10.2
+>
+>>     qemu-6.2.0
+>
+>>     host kernel: 5.10.84
+>
+>>     VM kernel: 5.10.84
+>
+>>
+>
+>> The steps to reproduce:
+>
+>>     # host console: run a VM with only one core, the import arg: <qemu:arg
+>
+>> value='-s'/>
+>
+>>     # details can be found here:
+>
+>>
+https://www.redhat.com/en/blog/debugging-kernel-qemulibvirt
+>
+>>     virsh create dev_core0.xml
+>
+>>    Â
+>
+>>     # run gdb client
+>
+>>     gdb ./vmlinux
+>
+>>
+>
+>>     # gdb client on host console
+>
+>>     (gdb) dir
+>
+>> ./usr/src/debug/kernel-5.10.84/linux-5.10.84-004.alpha.ali5000.alios7.aarch64
+>
+>>     (gdb) target remote localhost:1234
+>
+>>     (gdb) info b
+>
+>>     Num     Type           Disp Enb Address            What
+>
+>>     1       breakpoint     keep y   <MULTIPLE>
+>
+>>     1.1                         y   0xffff800010361444
+>
+>> mm/memory-failure.c:1318
+>
+>>     1.2                         y   0xffff800010361450 in memory_failure
+>
+>>                                                     at
+>
+>> mm/memory-failure.c:1488
+>
+>>     (gdb) c
+>
+>>     Continuing.
+>
+>>
+>
+>>     # console in VM, use madvise to inject a hwposion at virtual address
+>
+>> vaddr,
+>
+>>     # which will hit the b inmemory_failur: madvise(vaddr, pagesize,
+>
+>> MADV_HWPOISON);
+>
+>>     # and the VM pause
+>
+>>     ./run_madvise.c
+>
+>>
+>
+>>     # gdb client on host console
+>
+>>     (gdb)
+>
+>>     Continuing.
+>
+>>     Breakpoint 1, 0xffff800010361444 in memory_failure () at
+>
+>> mm/memory-failure.c:1318
+>
+>>     1318                    res = -EHWPOISON;
+>
+>>     (gdb) n
+>
+>>     vectors () at arch/arm64/kernel/entry.S:552
+>
+>>     552             kernel_ventry   1, irq                          // IRQ
+>
+>> EL1h
+>
+>
+>
+> The 'n' command is not a single-step: use stepi, which will suppress
+>
+> interrupts.
+>
+> Anyway, not a bug.
+>
+>
+>
+> r~
+>
+>
+Hi, Richard,
+>
+>
+Thank you for your quick reply, I also try `stepi`, but it does NOT work
+>
+either.
+>
+>
+(gdb) c
+>
+Continuing.
+>
+>
+Breakpoint 1, memory_failure (pfn=1273982, flags=1) at
+>
+mm/memory-failure.c:1488
+>
+1488    {
+>
+(gdb) stepi
+>
+vectors () at arch/arm64/kernel/entry.S:552
+>
+552             kernel_ventry   1, irq                          // IRQ
+>
+EL1h
+>
+>
+According to QEMU doc[1]: the default single stepping behavior is step with
+>
+the IRQs
+>
+and timer service routines off. I checked the MASK bits used to control the
+>
+single
+>
+stepping IE on my machine as bellow:
+>
+>
+# gdb client on host (x86 plafrom)
+>
+(gdb) maintenance packet qqemu.sstepbits
+>
+sending: "qqemu.sstepbits"
+>
+received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
+>
+>
+The sstep MASK looks as expected, but does not work as expected.
+>
+>
+I also try the same kernel and qemu version on X86 platform:
+>
+>>     gdb-10.2
+>
+>>     qemu-6.2.0
+>
+>>     host kernel: 5.10.84
+>
+>>     VM kernel: 5.10.84
+>
+>
+>
+The command `n` jumps to the next instruction.
+>
+>
+# gdb client on host (x86 plafrom)
+>
+(gdb) b memory-failure.c:1488
+>
+Breakpoint 1, memory_failure (pfn=1128931, flags=1) at
+>
+mm/memory-failure.c:1488
+>
+1488    {
+>
+(gdb) n
+>
+1497            if (!sysctl_memory_failure_recovery)
+>
+(gdb) stepi
+>
+0xffffffff812efdbc      1497            if
+>
+(!sysctl_memory_failure_recovery)
+>
+(gdb) stepi
+>
+0xffffffff812efdbe      1497            if
+>
+(!sysctl_memory_failure_recovery)
+>
+(gdb) n
+>
+1500            p = pfn_to_online_page(pfn);
+>
+(gdb) l
+>
+1496
+>
+1497            if (!sysctl_memory_failure_recovery)
+>
+1498                    panic("Memory failure on page %lx", pfn);
+>
+1499
+>
+1500            p = pfn_to_online_page(pfn);
+>
+1501            if (!p) {
+>
+>
+Best Regrades,
+>
+Shuai
+>
+>
+>
+[1]
+https://github.com/qemu/qemu/blob/master/docs/system/gdb.rst
+Hi, Richard,
+
+I was wondering that do you have any comments to this?
+
+Best Regrades,
+Shuai
+
diff --git a/results/classifier/zero-shot/010/review/31349848 b/results/classifier/zero-shot/010/review/31349848
new file mode 100644
index 00000000..9fd4186f
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/31349848
@@ -0,0 +1,178 @@
+permissions: 0.908
+PID: 0.903
+other: 0.901
+device: 0.881
+graphic: 0.876
+performance: 0.864
+vnc: 0.854
+semantic: 0.846
+socket: 0.846
+KVM: 0.827
+debug: 0.826
+files: 0.820
+boot: 0.815
+network: 0.769
+debug: 0.733
+PID: 0.116
+device: 0.104
+files: 0.067
+socket: 0.062
+other: 0.060
+performance: 0.029
+semantic: 0.022
+boot: 0.020
+vnc: 0.013
+network: 0.012
+permissions: 0.005
+KVM: 0.005
+graphic: 0.005
+
+[Qemu-devel]  [BUG] qemu stuck when detach host-usb device
+
+Description of problem:
+The guest has a host-usb device(Kingston Technology DataTraveler 100 G3/G4/SE9 
+G2), which is attached
+to xhci controller(on host). Qemu will stuck if I detach it from guest.
+
+How reproducible:
+100%
+
+Steps to Reproduce:
+1.            Use usb stick to copy files in guest , make it busy working.
+2.            virsh detach-device vm_name usb.xml
+
+Then qemu will stuck for 20s, I found this is because libusb_release_interface 
+block for 20s.
+Dmesg prints:
+
+[35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
+[35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
+[35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
+[35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
+
+Is this a hardware error or software's bug?
+
+On Tue, Nov 27, 2018 at 01:26:24AM +0000, linzhecheng wrote:
+>
+Description of problem:
+>
+The guest has a host-usb device(Kingston Technology DataTraveler 100
+>
+G3/G4/SE9 G2), which is attached
+>
+to xhci controller(on host). Qemu will stuck if I detach it from guest.
+>
+>
+How reproducible:
+>
+100%
+>
+>
+Steps to Reproduce:
+>
+1.            Use usb stick to copy files in guest , make it busy working.
+>
+2.            virsh detach-device vm_name usb.xml
+>
+>
+Then qemu will stuck for 20s, I found this is because
+>
+libusb_release_interface block for 20s.
+>
+Dmesg prints:
+>
+>
+[35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
+>
+[35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
+>
+[35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
+>
+[35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
+>
+>
+Is this a hardware error or software's bug?
+I'd guess software error, could be is libusb or (host) linux kernel.
+Cc'ing libusb-devel.
+
+cheers,
+  Gerd
+
+>
+-----Original Message-----
+>
+From: Gerd Hoffmann [
+mailto:address@hidden
+>
+Sent: Tuesday, November 27, 2018 2:09 PM
+>
+To: linzhecheng <address@hidden>
+>
+Cc: address@hidden; wangxin (U) <address@hidden>;
+>
+Zhoujian (jay) <address@hidden>; address@hidden
+>
+Subject: Re: [Qemu-devel] [BUG] qemu stuck when detach host-usb device
+>
+>
+On Tue, Nov 27, 2018 at 01:26:24AM +0000, linzhecheng wrote:
+>
+> Description of problem:
+>
+> The guest has a host-usb device(Kingston Technology DataTraveler 100
+>
+> G3/G4/SE9 G2), which is attached to xhci controller(on host). Qemu will
+>
+> stuck
+>
+if I detach it from guest.
+>
+>
+>
+> How reproducible:
+>
+> 100%
+>
+>
+>
+> Steps to Reproduce:
+>
+> 1.            Use usb stick to copy files in guest , make it busy working.
+>
+> 2.            virsh detach-device vm_name usb.xml
+>
+>
+>
+> Then qemu will stuck for 20s, I found this is because
+>
+> libusb_release_interface
+>
+block for 20s.
+>
+> Dmesg prints:
+>
+>
+>
+> [35442.034861] usb 4-2.1: Disable of device-initiated U1 failed.
+>
+> [35447.034993] usb 4-2.1: Disable of device-initiated U2 failed.
+>
+> [35452.035131] usb 4-2.1: Set SEL for device-initiated U1 failed.
+>
+> [35457.035259] usb 4-2.1: Set SEL for device-initiated U2 failed.
+>
+>
+>
+> Is this a hardware error or software's bug?
+>
+>
+I'd guess software error, could be is libusb or (host) linux kernel.
+>
+Cc'ing libusb-devel.
+Perhaps it's usb driver's bug. Could you also reproduce it?
+>
+>
+cheers,
+>
+Gerd
+
diff --git a/results/classifier/zero-shot/010/review/32484936 b/results/classifier/zero-shot/010/review/32484936
new file mode 100644
index 00000000..fcbcdf31
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/32484936
@@ -0,0 +1,247 @@
+other: 0.856
+PID: 0.839
+semantic: 0.832
+vnc: 0.830
+device: 0.830
+socket: 0.829
+permissions: 0.826
+debug: 0.825
+files: 0.816
+performance: 0.815
+graphic: 0.813
+network: 0.811
+boot: 0.810
+KVM: 0.793
+debug: 0.860
+files: 0.094
+other: 0.017
+PID: 0.010
+semantic: 0.007
+device: 0.006
+network: 0.005
+graphic: 0.004
+performance: 0.004
+socket: 0.003
+vnc: 0.003
+KVM: 0.003
+boot: 0.002
+permissions: 0.001
+
+[Qemu-devel] [Snapshot Bug?]Qcow2 meta data corruption
+
+Hi all,
+There was a problem about qcow2 image file happened in my serval vms and I could not figure it out,
+so have to ask for some help.
+Here is the thing:
+At first, I found there were some data corruption in a vm, so I did qemu-img check to all my vms.
+parts of check report:
+3-Leaked cluster 2926229 refcount=1 reference=0
+4-Leaked cluster 3021181 refcount=1 reference=0
+5-Leaked cluster 3021182 refcount=1 reference=0
+6-Leaked cluster 3021183 refcount=1 reference=0
+7-Leaked cluster 3021184 refcount=1 reference=0
+8-ERROR cluster 3102547 refcount=3 reference=4
+9-ERROR cluster 3111536 refcount=3 reference=4
+10-ERROR cluster 3113369 refcount=3 reference=4
+11-ERROR cluster 3235590 refcount=10 reference=11
+12-ERROR cluster 3235591 refcount=10 reference=11
+423-Warning: cluster offset=0xc000c00020000 is after the end of the image file, can't properly check refcounts.
+424-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+425-Warning: cluster offset=0xc0001000c0000 is after the end of the image file, can't properly check refcounts.
+426-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+427-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+428-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+429-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+430-Warning: cluster offset=0xc000c00010000 is after the end of the image file, can't properly check refcounts.
+After a futher look in, I found two l2 entries point to the same cluster, and that was found in serval qcow2 image files of different vms.
+Like this:
+table entry conflict (with our qcow2 check 
+tool):
+a table offset : 0x00000093f7080000 level : 2, l1 table entry 100, l2 table entry 7
+b table offset : 0x00000093f7080000 level : 2, l1 table entry 5, l2 table entry 7
+table entry conflict :
+a table offset : 0x00000000a01e0000 level : 2, l1 table entry 100, l2 table entry 19
+b table offset : 0x00000000a01e0000 level : 2, l1 table entry 5, l2 table entry 19
+table entry conflict :
+a table offset : 0x00000000a01d0000 level : 2, l1 table entry 100, l2 table entry 18
+b table offset : 0x00000000a01d0000 level : 2, l1 table entry 5, l2 table entry 18
+table entry conflict :
+a table offset : 0x00000000a01c0000 level : 2, l1 table entry 100, l2 table entry 17
+b table offset : 0x00000000a01c0000 level : 2, l1 table entry 5, l2 table entry 17
+table entry conflict :
+a table offset : 0x00000000a01b0000 level : 2, l1 table entry 100, l2 table entry 16
+b table offset : 0x00000000a01b0000 level : 2, l1 table entry 5, l2 table entry 16
+I think the problem is relate to the snapshot create, delete. But I cant reproduce it .
+Can Anyone give a hint about how this happen?
+Qemu version 2.0.1, I download the source code and make install it.
+Qemu parameters:
+/usr/bin/kvm -chardev socket,id=qmp,path=/var/run/qemu-server/5855899639838.qmp,server,nowait -mon chardev=qmp,mode=control -vnc :0,websocket,to=200 -enable-kvm -pidfile /var/run/qemu-server/5855899639838.pid -daemonize -name yfMailSvr-200.200.0.14 -smp sockets=1,cores=4 -cpu core2duo,hv_spinlocks=0xffff,hv_relaxed,hv_time,hv_vapic,+sse4.1,+sse4.2,+x2apic,+erms,+smep,+fsgsbase,+f16c,+dca,+pcid,+pdcm,+xtpr,+ht,+ss,+acpi,+ds -nodefaults -vga cirrus -k en-us -boot menu=on,splash-time=8000 -m 8192 -usb -drive if=none,id=drive-ide0,media=cdrom,aio=native -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0 -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-1.qcow2,if=none,id=drive-virtio1,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-2.qcow2,if=none,id=drive-virtio2,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio2,id=virtio2,bus=pci.0,addr=0xc,bootindex=101 -netdev type=tap,id=net0,ifname=585589963983800,script=/sf/etc/kvm/vtp-bridge,vhost=on,vhostforce=on -device virtio-net-pci,romfile=,mac=FE:FC:FE:F0:AB:BA,netdev=net0,bus=pci.0,addr=0x12,id=net0 -rtc driftfix=slew,clock=rt,base=localtime -global kvm-pit.lost_tick_policy=discard -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1
+Thanks
+Sangfor VT.
+leijian
+
+Hi all,
+There was a problem about qcow2 image file happened in my serval vms and I could not figure it out,
+so have to ask for some help.
+Here is the thing:
+At first, I found there were some data corruption in a vm, so I did qemu-img check to all my vms.
+parts of check report:
+3-Leaked cluster 2926229 refcount=1 reference=0
+4-Leaked cluster 3021181 refcount=1 reference=0
+5-Leaked cluster 3021182 refcount=1 reference=0
+6-Leaked cluster 3021183 refcount=1 reference=0
+7-Leaked cluster 3021184 refcount=1 reference=0
+8-ERROR cluster 3102547 refcount=3 reference=4
+9-ERROR cluster 3111536 refcount=3 reference=4
+10-ERROR cluster 3113369 refcount=3 reference=4
+11-ERROR cluster 3235590 refcount=10 reference=11
+12-ERROR cluster 3235591 refcount=10 reference=11
+423-Warning: cluster offset=0xc000c00020000 is after the end of the image file, can't properly check refcounts.
+424-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+425-Warning: cluster offset=0xc0001000c0000 is after the end of the image file, can't properly check refcounts.
+426-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+427-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+428-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+429-Warning: cluster offset=0xc000c000c0000 is after the end of the image file, can't properly check refcounts.
+430-Warning: cluster offset=0xc000c00010000 is after the end of the image file, can't properly check refcounts.
+After a futher look in, I found two l2 entries point to the same cluster, and that was found in serval qcow2 image files of different vms.
+Like this:
+table entry conflict (with our qcow2 check 
+tool):
+a table offset : 0x00000093f7080000 level : 2, l1 table entry 100, l2 table entry 7
+b table offset : 0x00000093f7080000 level : 2, l1 table entry 5, l2 table entry 7
+table entry conflict :
+a table offset : 0x00000000a01e0000 level : 2, l1 table entry 100, l2 table entry 19
+b table offset : 0x00000000a01e0000 level : 2, l1 table entry 5, l2 table entry 19
+table entry conflict :
+a table offset : 0x00000000a01d0000 level : 2, l1 table entry 100, l2 table entry 18
+b table offset : 0x00000000a01d0000 level : 2, l1 table entry 5, l2 table entry 18
+table entry conflict :
+a table offset : 0x00000000a01c0000 level : 2, l1 table entry 100, l2 table entry 17
+b table offset : 0x00000000a01c0000 level : 2, l1 table entry 5, l2 table entry 17
+table entry conflict :
+a table offset : 0x00000000a01b0000 level : 2, l1 table entry 100, l2 table entry 16
+b table offset : 0x00000000a01b0000 level : 2, l1 table entry 5, l2 table entry 16
+I think the problem is relate to the snapshot create, delete. But I cant reproduce it .
+Can Anyone give a hint about how this happen?
+Qemu version 2.0.1, I download the source code and make install it.
+Qemu parameters:
+/usr/bin/kvm -chardev socket,id=qmp,path=/var/run/qemu-server/5855899639838.qmp,server,nowait -mon chardev=qmp,mode=control -vnc :0,websocket,to=200 -enable-kvm -pidfile /var/run/qemu-server/5855899639838.pid -daemonize -name yfMailSvr-200.200.0.14 -smp sockets=1,cores=4 -cpu core2duo,hv_spinlocks=0xffff,hv_relaxed,hv_time,hv_vapic,+sse4.1,+sse4.2,+x2apic,+erms,+smep,+fsgsbase,+f16c,+dca,+pcid,+pdcm,+xtpr,+ht,+ss,+acpi,+ds -nodefaults -vga cirrus -k en-us -boot menu=on,splash-time=8000 -m 8192 -usb -drive if=none,id=drive-ide0,media=cdrom,aio=native -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0 -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-1.qcow2,if=none,id=drive-virtio1,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb -drive file=/sf/data/36b82a720d3a278001ba904e80c20c13e_ecf4bbbf3e94/images/host-ecf4bbbf3e94/784f3f08532a/yfMailSvr-200.200.0.14.vm/vm-disk-2.qcow2,if=none,id=drive-virtio2,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio2,id=virtio2,bus=pci.0,addr=0xc,bootindex=101 -netdev type=tap,id=net0,ifname=585589963983800,script=/sf/etc/kvm/vtp-bridge,vhost=on,vhostforce=on -device virtio-net-pci,romfile=,mac=FE:FC:FE:F0:AB:BA,netdev=net0,bus=pci.0,addr=0x12,id=net0 -rtc driftfix=slew,clock=rt,base=localtime -global kvm-pit.lost_tick_policy=discard -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1
+Thanks
+Sangfor VT.
+leijian
+
+Am 03.04.2015 um 12:04 hat leijian geschrieben:
+>
+Hi all,
+>
+>
+There was a problem about qcow2 image file happened in my serval vms and I
+>
+could not figure it out,
+>
+so have to ask for some help.
+>
+[...]
+>
+I think the problem is relate to the snapshot create, delete. But I cant
+>
+reproduce it .
+>
+Can Anyone give a hint about how this happen?
+How did you create/delete your snapshots?
+
+More specifically, did you take care to never access your image from
+more than one process (except if both are read-only)? It happens
+occasionally that people use 'qemu-img snapshot' while the VM is
+running. This is wrong and can corrupt the image.
+
+Kevin
+
+On 04/07/2015 03:33 AM, Kevin Wolf wrote:
+>
+More specifically, did you take care to never access your image from
+>
+more than one process (except if both are read-only)? It happens
+>
+occasionally that people use 'qemu-img snapshot' while the VM is
+>
+running. This is wrong and can corrupt the image.
+Since this has been done by more than one person, I'm wondering if there
+is something we can do in the qcow2 format itself to make it harder for
+the casual user to cause corruption.  Maybe if we declare some bit or
+extension header for an image open for writing, which other readers can
+use as a warning ("this image is being actively modified; reading it may
+fail"), and other writers can use to deny access ("another process is
+already modifying this image"), where a writer should set that bit
+before writing anything else in the file, then clear it on exit.  Of
+course, you'd need a way to override the bit to actively clear it to
+recover from the case of a writer dying unexpectedly without resetting
+it normally.  And it won't help the case of a reader opening the file
+first, followed by a writer, where the reader could still get thrown off
+track.
+
+Or maybe we could document in the qcow2 format that all readers and
+writers should attempt to obtain the appropriate flock() permissions [or
+other appropriate advisory locking scheme] over the file header, so that
+cooperating processes that both use advisory locking will know when the
+file is in use by another process.
+
+-- 
+Eric Blake   eblake redhat com    +1-919-301-3266
+Libvirt virtualization library
+http://libvirt.org
+signature.asc
+Description:
+OpenPGP digital signature
+
+
+I created/deleted the snapshot by using qmp command "snapshot_blkdev_internal"/"snapshot_delete_blkdev_internal", and for avoiding the case you mentioned above, I have added the flock() permission in the qemu_open().
+Here is the test of doing qemu-img snapshot to a running vm:
+Diskfile:/sf/data/36c81f660e38b3b001b183da50b477d89_f8bc123b3e74/images/host-f8bc123b3e74/4a8d8728fcdc/Devried30030.vm/vm-disk-1.qcow2 is used! errno=Resource temporarily unavailable
+Does the two cluster entry happen to be the same because of the refcount of using cluster decrease to 0 unexpectedly and  is allocated again?
+If it was not accessing the image from more than one process, any other exceptions I can test for?
+Thanks
+leijian
+From:
+Eric Blake
+Date:
+2015-04-07 23:27
+To:
+Kevin Wolf
+;
+leijian
+CC:
+qemu-devel
+;
+stefanha
+Subject:
+Re: [Qemu-devel] [Snapshot Bug?]Qcow2 meta data 
+corruption
+On 04/07/2015 03:33 AM, Kevin Wolf wrote:
+> More specifically, did you take care to never access your image from
+> more than one process (except if both are read-only)? It happens
+> occasionally that people use 'qemu-img snapshot' while the VM is
+> running. This is wrong and can corrupt the image.
+Since this has been done by more than one person, I'm wondering if there
+is something we can do in the qcow2 format itself to make it harder for
+the casual user to cause corruption.  Maybe if we declare some bit or
+extension header for an image open for writing, which other readers can
+use as a warning ("this image is being actively modified; reading it may
+fail"), and other writers can use to deny access ("another process is
+already modifying this image"), where a writer should set that bit
+before writing anything else in the file, then clear it on exit.  Of
+course, you'd need a way to override the bit to actively clear it to
+recover from the case of a writer dying unexpectedly without resetting
+it normally.  And it won't help the case of a reader opening the file
+first, followed by a writer, where the reader could still get thrown off
+track.
+Or maybe we could document in the qcow2 format that all readers and
+writers should attempt to obtain the appropriate flock() permissions [or
+other appropriate advisory locking scheme] over the file header, so that
+cooperating processes that both use advisory locking will know when the
+file is in use by another process.
+--
+Eric Blake   eblake redhat com    +1-919-301-3266
+Libvirt virtualization library http://libvirt.org
+
diff --git a/results/classifier/zero-shot/010/review/33802194 b/results/classifier/zero-shot/010/review/33802194
new file mode 100644
index 00000000..27d3a086
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/33802194
@@ -0,0 +1,4963 @@
+vnc: 0.728
+KVM: 0.725
+permissions: 0.705
+device: 0.691
+debug: 0.681
+performance: 0.659
+semantic: 0.656
+socket: 0.655
+network: 0.644
+graphic: 0.640
+other: 0.637
+PID: 0.636
+boot: 0.631
+files: 0.598
+debug: 0.560
+other: 0.063
+PID: 0.041
+device: 0.031
+boot: 0.014
+files: 0.013
+performance: 0.011
+socket: 0.010
+semantic: 0.008
+network: 0.007
+KVM: 0.005
+graphic: 0.003
+permissions: 0.003
+vnc: 0.001
+
+[BUG] cxl can not create region
+
+Hi list
+
+I want to test cxl functions in arm64, and found some problems I can't
+figure out.
+
+My test environment:
+
+1. build latest bios from
+https://github.com/tianocore/edk2.git
+master
+branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
+2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
+master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
+support patch:
+https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
+3. build Linux kernel from
+https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
+preview
+branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
+4. build latest ndctl tools from
+https://github.com/pmem/ndctl
+create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
+
+And my qemu test commands:
+sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
+        -cpu max -smp 8 -nographic -no-reboot \
+        -kernel $KERNEL -bios $BIOS_BIN \
+        -drive if=none,file=$ROOTFS,format=qcow2,id=hd \
+        -device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
+nokaslr dyndbg="module cxl* +p"' \
+        -object memory-backend-ram,size=4G,id=mem0 \
+        -numa node,nodeid=0,cpus=0-7,memdev=mem0 \
+        -net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
+        -object
+memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
+\
+        -object
+memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
+\
+        -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+        -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+        -device cxl-upstream,bus=root_port0,id=us0 \
+        -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+        -device
+cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
+        -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+        -device
+cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
+        -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+        -device
+cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
+        -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+        -device
+cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
+        -M 
+cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
+
+And I have got two problems.
+1. When I want to create x1 region with command: "cxl create-region -d
+decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
+reference. Crash log:
+
+[  534.697324] cxl_region region0: config state: 0
+[  534.697346] cxl_region region0: probe: -6
+[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
+[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+for mem0:decoder3.0 @ 0
+[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
+[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+[  534.699405] Unable to handle kernel NULL pointer dereference at
+virtual address 0000000000000000
+[  534.701474] Mem abort info:
+[  534.701994]   ESR = 0x0000000086000004
+[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
+[  534.703616]   SET = 0, FnV = 0
+[  534.704174]   EA = 0, S1PTW = 0
+[  534.704803]   FSC = 0x04: level 0 translation fault
+[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
+[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
+[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
+[  534.710301] Modules linked in:
+[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
+5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
+[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
+[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+[  534.719190] pc : 0x0
+[  534.719928] lr : commit_store+0x118/0x2cc
+[  534.721007] sp : ffff80000aec3c30
+[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27: ffff0000c0c06b30
+[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24: ffff0000c0a29400
+[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21: ffff0000c0c06800
+[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18: 0000000000000000
+[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd41fe838
+[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
+[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
+[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff0000c0906e80
+[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000aec3bf0
+[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c155a000
+[  534.738878] Call trace:
+[  534.739368]  0x0
+[  534.739713]  dev_attr_store+0x1c/0x30
+[  534.740186]  sysfs_kf_write+0x48/0x58
+[  534.740961]  kernfs_fop_write_iter+0x128/0x184
+[  534.741872]  new_sync_write+0xdc/0x158
+[  534.742706]  vfs_write+0x1ac/0x2a8
+[  534.743440]  ksys_write+0x68/0xf0
+[  534.744328]  __arm64_sys_write+0x1c/0x28
+[  534.745180]  invoke_syscall+0x44/0xf0
+[  534.745989]  el0_svc_common+0x4c/0xfc
+[  534.746661]  do_el0_svc+0x60/0xa8
+[  534.747378]  el0_svc+0x2c/0x78
+[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
+[  534.748919]  el0t_64_sync+0x18c/0x190
+[  534.749629] Code: bad PC value
+[  534.750169] ---[ end trace 0000000000000000 ]---
+
+2. When I want to create x4 region with command: "cxl create-region -d
+decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
+
+cxl region: create_region: region0: failed to set target3 to mem3
+cxl region: cmd_create_region: created 0 regions
+
+And kernel log as below:
+[   60.536663] cxl_region region0: config state: 0
+[   60.536675] cxl_region region0: probe: -6
+[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
+[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
+mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
+[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
+[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
+[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
+mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
+[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
+[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
+[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
+mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
+[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
+[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
+[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+for mem0:decoder3.0 @ 0
+[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
+[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at 1
+
+I have tried to write sysfs node manually, got same errors.
+
+Hope I can get some helps here.
+
+Bob
+
+On Fri, 5 Aug 2022 10:20:23 +0800
+Bobo WL <lmw.bobo@gmail.com> wrote:
+
+>
+Hi list
+>
+>
+I want to test cxl functions in arm64, and found some problems I can't
+>
+figure out.
+Hi Bob,
+
+Glad to see people testing this code.
+
+>
+>
+My test environment:
+>
+>
+1. build latest bios from
+https://github.com/tianocore/edk2.git
+master
+>
+branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
+>
+2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
+>
+master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
+>
+support patch:
+>
+https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
+>
+3. build Linux kernel from
+>
+https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
+preview
+>
+branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
+>
+4. build latest ndctl tools from
+https://github.com/pmem/ndctl
+>
+create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
+>
+>
+And my qemu test commands:
+>
+sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
+>
+-cpu max -smp 8 -nographic -no-reboot \
+>
+-kernel $KERNEL -bios $BIOS_BIN \
+>
+-drive if=none,file=$ROOTFS,format=qcow2,id=hd \
+>
+-device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
+>
+nokaslr dyndbg="module cxl* +p"' \
+>
+-object memory-backend-ram,size=4G,id=mem0 \
+>
+-numa node,nodeid=0,cpus=0-7,memdev=mem0 \
+>
+-net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
+>
+-object
+>
+memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
+>
+\
+>
+-device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+>
+-device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+Probably not related to your problem, but there is a disconnect in QEMU /
+kernel assumptionsaround the presence of an HDM decoder when a HB only
+has a single root port. Spec allows it to be provided or not as an 
+implementation choice.
+Kernel assumes it isn't provide. Qemu assumes it is.
+
+The temporary solution is to throw in a second root port on the HB and not
+connect anything to it.  Longer term I may special case this so that the 
+particular
+decoder defaults to pass through settings in QEMU if there is only one root 
+port.
+
+>
+-device cxl-upstream,bus=root_port0,id=us0 \
+>
+-device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+>
+-device
+>
+cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
+>
+-device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+>
+-device
+>
+cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
+>
+-device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+>
+-device
+>
+cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
+>
+-device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+>
+-device
+>
+cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
+>
+-M
+>
+cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
+>
+>
+And I have got two problems.
+>
+1. When I want to create x1 region with command: "cxl create-region -d
+>
+decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
+>
+reference. Crash log:
+>
+>
+[  534.697324] cxl_region region0: config state: 0
+>
+[  534.697346] cxl_region region0: probe: -6
+Seems odd this is up here.  But maybe fine.
+
+>
+[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
+>
+[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
+>
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+>
+[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+>
+[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+>
+[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+>
+[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+>
+for mem0:decoder3.0 @ 0
+>
+[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
+>
+[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
+>
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+>
+[  534.699405] Unable to handle kernel NULL pointer dereference at
+>
+virtual address 0000000000000000
+>
+[  534.701474] Mem abort info:
+>
+[  534.701994]   ESR = 0x0000000086000004
+>
+[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
+>
+[  534.703616]   SET = 0, FnV = 0
+>
+[  534.704174]   EA = 0, S1PTW = 0
+>
+[  534.704803]   FSC = 0x04: level 0 translation fault
+>
+[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
+>
+[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
+>
+[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
+>
+[  534.710301] Modules linked in:
+>
+[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
+>
+5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
+>
+[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
+>
+[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+>
+[  534.719190] pc : 0x0
+>
+[  534.719928] lr : commit_store+0x118/0x2cc
+>
+[  534.721007] sp : ffff80000aec3c30
+>
+[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27:
+>
+ffff0000c0c06b30
+>
+[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24:
+>
+ffff0000c0a29400
+>
+[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21:
+>
+ffff0000c0c06800
+>
+[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18:
+>
+0000000000000000
+>
+[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15:
+>
+0000ffffd41fe838
+>
+[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12:
+>
+0000000000000000
+>
+[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 :
+>
+0000000000000000
+>
+[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 :
+>
+ffff0000c0906e80
+>
+[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
+>
+ffff80000aec3bf0
+>
+[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
+>
+ffff0000c155a000
+>
+[  534.738878] Call trace:
+>
+[  534.739368]  0x0
+>
+[  534.739713]  dev_attr_store+0x1c/0x30
+>
+[  534.740186]  sysfs_kf_write+0x48/0x58
+>
+[  534.740961]  kernfs_fop_write_iter+0x128/0x184
+>
+[  534.741872]  new_sync_write+0xdc/0x158
+>
+[  534.742706]  vfs_write+0x1ac/0x2a8
+>
+[  534.743440]  ksys_write+0x68/0xf0
+>
+[  534.744328]  __arm64_sys_write+0x1c/0x28
+>
+[  534.745180]  invoke_syscall+0x44/0xf0
+>
+[  534.745989]  el0_svc_common+0x4c/0xfc
+>
+[  534.746661]  do_el0_svc+0x60/0xa8
+>
+[  534.747378]  el0_svc+0x2c/0x78
+>
+[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
+>
+[  534.748919]  el0t_64_sync+0x18c/0x190
+>
+[  534.749629] Code: bad PC value
+>
+[  534.750169] ---[ end trace 0000000000000000 ]---
+>
+>
+2. When I want to create x4 region with command: "cxl create-region -d
+>
+decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
+>
+>
+cxl region: create_region: region0: failed to set target3 to mem3
+>
+cxl region: cmd_create_region: created 0 regions
+>
+>
+And kernel log as below:
+>
+[   60.536663] cxl_region region0: config state: 0
+>
+[   60.536675] cxl_region region0: probe: -6
+>
+[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
+>
+[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
+>
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+>
+[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+>
+[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
+>
+mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
+>
+[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
+>
+[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
+>
+mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
+>
+[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
+>
+[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
+>
+mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
+>
+[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
+>
+[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+>
+[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+>
+for mem0:decoder3.0 @ 0
+>
+[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
+This looks like off by 1 that should be fixed in the below mentioned
+cxl/pending branch.  That ig should be 256.  Note the fix was
+for a test case with a fat HB and no switch, but certainly looks
+like this is the same issue.
+
+>
+[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
+>
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+>
+[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at
+>
+1
+>
+>
+I have tried to write sysfs node manually, got same errors.
+When stepping through by hand, which sysfs write triggers the crash above?
+
+Not sure it's related, but I've just sent out a fix to the
+target register handling in QEMU.
+20220808122051.14822-1-Jonathan.Cameron@huawei.com
+/T/#m47ff985412ce44559e6b04d677c302f8cd371330">https://lore.kernel.org/linux-cxl/
+20220808122051.14822-1-Jonathan.Cameron@huawei.com
+/T/#m47ff985412ce44559e6b04d677c302f8cd371330
+I did have one instance last week of triggering what looked to be a race 
+condition but
+the stack trace doesn't looks related to what you've hit.
+
+It will probably be a few days before I have time to take a look at replicating
+what you have seen.
+
+If you have time, try using the kernel.org cxl/pending branch as there are
+a few additional fixes on there since you sent this email.  Optimistic to hope
+this is covered by one of those, but at least it will mean we are trying to 
+replicate
+on same branch.
+
+Jonathan
+
+
+>
+>
+Hope I can get some helps here.
+>
+>
+Bob
+
+Hi Jonathan
+
+Thanks for your reply!
+
+On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+<Jonathan.Cameron@huawei.com> wrote:
+>
+>
+Probably not related to your problem, but there is a disconnect in QEMU /
+>
+kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+has a single root port. Spec allows it to be provided or not as an
+>
+implementation choice.
+>
+Kernel assumes it isn't provide. Qemu assumes it is.
+>
+>
+The temporary solution is to throw in a second root port on the HB and not
+>
+connect anything to it.  Longer term I may special case this so that the
+>
+particular
+>
+decoder defaults to pass through settings in QEMU if there is only one root
+>
+port.
+>
+You are right! After adding an extra HB in qemu, I can create a x1
+region successfully.
+But have some errors in Nvdimm:
+
+[   74.925838] Unknown online node for memory at 0x10000000000, assuming node 0
+[   74.925846] Unknown target node for memory at 0x10000000000, assuming node 0
+[   74.927470] nd_region region0: nmem0: is disabled, failing probe
+
+And x4 region still failed with same errors, using latest cxl/preview
+branch don't work.
+I have picked "Two CXL emulation fixes" patches in qemu, still not working.
+
+Bob
+
+On Tue, 9 Aug 2022 21:07:06 +0800
+Bobo WL <lmw.bobo@gmail.com> wrote:
+
+>
+Hi Jonathan
+>
+>
+Thanks for your reply!
+>
+>
+On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+<Jonathan.Cameron@huawei.com> wrote:
+>
+>
+>
+> Probably not related to your problem, but there is a disconnect in QEMU /
+>
+> kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+> has a single root port. Spec allows it to be provided or not as an
+>
+> implementation choice.
+>
+> Kernel assumes it isn't provide. Qemu assumes it is.
+>
+>
+>
+> The temporary solution is to throw in a second root port on the HB and not
+>
+> connect anything to it.  Longer term I may special case this so that the
+>
+> particular
+>
+> decoder defaults to pass through settings in QEMU if there is only one root
+>
+> port.
+>
+>
+>
+>
+You are right! After adding an extra HB in qemu, I can create a x1
+>
+region successfully.
+>
+But have some errors in Nvdimm:
+>
+>
+[   74.925838] Unknown online node for memory at 0x10000000000, assuming node > 0
+>
+[   74.925846] Unknown target node for memory at 0x10000000000, assuming node > 0
+>
+[   74.927470] nd_region region0: nmem0: is disabled, failing probe
+Ah. I've seen this one, but not chased it down yet.  Was on my todo list to 
+chase
+down. Once I reach this state I can verify the HDM Decode is correct which is 
+what
+I've been using to test (Which wasn't true until earlier this week). 
+I'm currently testing via devmem, more for historical reasons than because it 
+makes
+that much sense anymore.  
+
+>
+>
+And x4 region still failed with same errors, using latest cxl/preview
+>
+branch don't work.
+>
+I have picked "Two CXL emulation fixes" patches in qemu, still not working.
+>
+>
+Bob
+
+On Tue, 9 Aug 2022 17:08:25 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Tue, 9 Aug 2022 21:07:06 +0800
+>
+Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+>
+> Hi Jonathan
+>
+>
+>
+> Thanks for your reply!
+>
+>
+>
+> On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> <Jonathan.Cameron@huawei.com> wrote:
+>
+> >
+>
+> > Probably not related to your problem, but there is a disconnect in QEMU /
+>
+> > kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+> > has a single root port. Spec allows it to be provided or not as an
+>
+> > implementation choice.
+>
+> > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> >
+>
+> > The temporary solution is to throw in a second root port on the HB and not
+>
+> > connect anything to it.  Longer term I may special case this so that the
+>
+> > particular
+>
+> > decoder defaults to pass through settings in QEMU if there is only one
+>
+> > root port.
+>
+> >
+>
+>
+>
+> You are right! After adding an extra HB in qemu, I can create a x1
+>
+> region successfully.
+>
+> But have some errors in Nvdimm:
+>
+>
+>
+> [   74.925838] Unknown online node for memory at 0x10000000000, assuming
+>
+> node 0
+>
+> [   74.925846] Unknown target node for memory at 0x10000000000, assuming
+>
+> node 0
+>
+> [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+>
+Ah. I've seen this one, but not chased it down yet.  Was on my todo list to
+>
+chase
+>
+down. Once I reach this state I can verify the HDM Decode is correct which is
+>
+what
+>
+I've been using to test (Which wasn't true until earlier this week).
+>
+I'm currently testing via devmem, more for historical reasons than because it
+>
+makes
+>
+that much sense anymore.
+*embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+I'd forgotten that was still on the todo list. I don't think it will
+be particularly hard to do and will take a look in next few days.
+
+Very very indirectly this error is causing a driver probe fail that means that
+we hit a code path that has a rather odd looking check on NDD_LABELING.
+Should not have gotten near that path though - hence the problem is actually
+when we call cxl_pmem_get_config_data() and it returns an error because
+we haven't fully connected up the command in QEMU.
+
+Jonathan
+
+
+>
+>
+>
+>
+> And x4 region still failed with same errors, using latest cxl/preview
+>
+> branch don't work.
+>
+> I have picked "Two CXL emulation fixes" patches in qemu, still not working.
+>
+>
+>
+> Bob
+
+On Thu, 11 Aug 2022 18:08:57 +0100
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+
+>
+On Tue, 9 Aug 2022 17:08:25 +0100
+>
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+> On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+>
+>
+> > Hi Jonathan
+>
+> >
+>
+> > Thanks for your reply!
+>
+> >
+>
+> > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > >
+>
+> > > Probably not related to your problem, but there is a disconnect in QEMU
+>
+> > > /
+>
+> > > kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+> > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > implementation choice.
+>
+> > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > >
+>
+> > > The temporary solution is to throw in a second root port on the HB and
+>
+> > > not
+>
+> > > connect anything to it.  Longer term I may special case this so that
+>
+> > > the particular
+>
+> > > decoder defaults to pass through settings in QEMU if there is only one
+>
+> > > root port.
+>
+> > >
+>
+> >
+>
+> > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > region successfully.
+>
+> > But have some errors in Nvdimm:
+>
+> >
+>
+> > [   74.925838] Unknown online node for memory at 0x10000000000, assuming
+>
+> > node 0
+>
+> > [   74.925846] Unknown target node for memory at 0x10000000000, assuming
+>
+> > node 0
+>
+> > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+>
+>
+> Ah. I've seen this one, but not chased it down yet.  Was on my todo list to
+>
+> chase
+>
+> down. Once I reach this state I can verify the HDM Decode is correct which
+>
+> is what
+>
+> I've been using to test (Which wasn't true until earlier this week).
+>
+> I'm currently testing via devmem, more for historical reasons than because
+>
+> it makes
+>
+> that much sense anymore.
+>
+>
+*embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+I'd forgotten that was still on the todo list. I don't think it will
+>
+be particularly hard to do and will take a look in next few days.
+>
+>
+Very very indirectly this error is causing a driver probe fail that means that
+>
+we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+Should not have gotten near that path though - hence the problem is actually
+>
+when we call cxl_pmem_get_config_data() and it returns an error because
+>
+we haven't fully connected up the command in QEMU.
+So a least one bug in QEMU. We were not supporting variable length payloads on 
+mailbox
+inputs (but were on outputs).  That hasn't mattered until we get to LSA writes.
+We just need to relax condition on the supplied length.
+
+diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+index c352a935c4..fdda9529fe 100644
+--- a/hw/cxl/cxl-mailbox-utils.c
++++ b/hw/cxl/cxl-mailbox-utils.c
+@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+     cxl_cmd = &cxl_cmd_set[set][cmd];
+     h = cxl_cmd->handler;
+     if (h) {
+-        if (len == cxl_cmd->in) {
++        if (len == cxl_cmd->in || !cxl_cmd->in) {
+             cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+                 A_CXL_DEV_CMD_PAYLOAD;
+             ret = (*h)(cxl_cmd, cxl_dstate, &len);
+
+
+This lets the nvdimm/region probe fine, but I'm getting some issues with
+namespace capacity so I'll look at what is causing that next.
+Unfortunately I'm not that familiar with the driver/nvdimm side of things
+so it's take a while to figure out what kicks off what!
+
+Jonathan
+
+>
+>
+Jonathan
+>
+>
+>
+>
+>
+> >
+>
+> > And x4 region still failed with same errors, using latest cxl/preview
+>
+> > branch don't work.
+>
+> > I have picked "Two CXL emulation fixes" patches in qemu, still not
+>
+> > working.
+>
+> >
+>
+> > Bob
+>
+>
+
+Jonathan Cameron wrote:
+>
+On Thu, 11 Aug 2022 18:08:57 +0100
+>
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+> On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+>
+> > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> >
+>
+> > > Hi Jonathan
+>
+> > >
+>
+> > > Thanks for your reply!
+>
+> > >
+>
+> > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > >
+>
+> > > > Probably not related to your problem, but there is a disconnect in
+>
+> > > > QEMU /
+>
+> > > > kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+> > > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > > implementation choice.
+>
+> > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > >
+>
+> > > > The temporary solution is to throw in a second root port on the HB
+>
+> > > > and not
+>
+> > > > connect anything to it.  Longer term I may special case this so that
+>
+> > > > the particular
+>
+> > > > decoder defaults to pass through settings in QEMU if there is only
+>
+> > > > one root port.
+>
+> > > >
+>
+> > >
+>
+> > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > region successfully.
+>
+> > > But have some errors in Nvdimm:
+>
+> > >
+>
+> > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > assuming node 0
+>
+> > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > assuming node 0
+>
+> > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> >
+>
+> > Ah. I've seen this one, but not chased it down yet.  Was on my todo list
+>
+> > to chase
+>
+> > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > which is what
+>
+> > I've been using to test (Which wasn't true until earlier this week).
+>
+> > I'm currently testing via devmem, more for historical reasons than
+>
+> > because it makes
+>
+> > that much sense anymore.
+>
+>
+>
+> *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> I'd forgotten that was still on the todo list. I don't think it will
+>
+> be particularly hard to do and will take a look in next few days.
+>
+>
+>
+> Very very indirectly this error is causing a driver probe fail that means
+>
+> that
+>
+> we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> Should not have gotten near that path though - hence the problem is actually
+>
+> when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> we haven't fully connected up the command in QEMU.
+>
+>
+So a least one bug in QEMU. We were not supporting variable length payloads
+>
+on mailbox
+>
+inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+writes.
+>
+We just need to relax condition on the supplied length.
+>
+>
+diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+index c352a935c4..fdda9529fe 100644
+>
+--- a/hw/cxl/cxl-mailbox-utils.c
+>
++++ b/hw/cxl/cxl-mailbox-utils.c
+>
+@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+h = cxl_cmd->handler;
+>
+if (h) {
+>
+-        if (len == cxl_cmd->in) {
+>
++        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+A_CXL_DEV_CMD_PAYLOAD;
+>
+ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+>
+>
+This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+namespace capacity so I'll look at what is causing that next.
+>
+Unfortunately I'm not that familiar with the driver/nvdimm side of things
+>
+so it's take a while to figure out what kicks off what!
+The whirlwind tour is that 'struct nd_region' instances that represent a
+persitent memory address range are composed of one more mappings of
+'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
+in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
+the dimm (if locked) and interrogating the label area to look for
+namespace labels.
+
+The label command calls are routed to the '->ndctl()' callback that was
+registered when the CXL nvdimm_bus_descriptor was created. That callback
+handles both 'bus' scope calls, currently none for CXL, and per nvdimm
+calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
+to CXL commands.
+
+The 'struct nvdimm' objects that the CXL side registers have the
+NDD_LABELING flag set which means that namespaces need to be explicitly
+created / provisioned from region capacity. Otherwise, if
+drivers/nvdimm/dimm.c does not find a namespace-label-index block then
+the region reverts to label-less mode and a default namespace equal to
+the size of the region is instantiated.
+
+If you are seeing small mismatches in namespace capacity then it may
+just be the fact that by default 'ndctl create-namespace' results in an
+'fsdax' mode namespace which just means that it is a block device where
+1.5% of the capacity is reserved for 'struct page' metadata. You should
+be able to see namespace capacity == region capacity by doing "ndctl
+create-namespace -m raw", and disable DAX operation.
+
+Hope that helps.
+
+On Fri, 12 Aug 2022 09:03:02 -0700
+Dan Williams <dan.j.williams@intel.com> wrote:
+
+>
+Jonathan Cameron wrote:
+>
+> On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> >
+>
+> > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > >
+>
+> > > > Hi Jonathan
+>
+> > > >
+>
+> > > > Thanks for your reply!
+>
+> > > >
+>
+> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > >
+>
+> > > > > Probably not related to your problem, but there is a disconnect in
+>
+> > > > > QEMU /
+>
+> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
+>
+> > > > > only
+>
+> > > > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > > > implementation choice.
+>
+> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > >
+>
+> > > > > The temporary solution is to throw in a second root port on the HB
+>
+> > > > > and not
+>
+> > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > that the particular
+>
+> > > > > decoder defaults to pass through settings in QEMU if there is only
+>
+> > > > > one root port.
+>
+> > > > >
+>
+> > > >
+>
+> > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > region successfully.
+>
+> > > > But have some errors in Nvdimm:
+>
+> > > >
+>
+> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > > >
+>
+> > >
+>
+> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > list to chase
+>
+> > > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > > which is what
+>
+> > > I've been using to test (Which wasn't true until earlier this week).
+>
+> > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > because it makes
+>
+> > > that much sense anymore.
+>
+> >
+>
+> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > be particularly hard to do and will take a look in next few days.
+>
+> >
+>
+> > Very very indirectly this error is causing a driver probe fail that means
+>
+> > that
+>
+> > we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> > Should not have gotten near that path though - hence the problem is
+>
+> > actually
+>
+> > when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> > we haven't fully connected up the command in QEMU.
+>
+>
+>
+> So a least one bug in QEMU. We were not supporting variable length payloads
+>
+> on mailbox
+>
+> inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> writes.
+>
+> We just need to relax condition on the supplied length.
+>
+>
+>
+> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> index c352a935c4..fdda9529fe 100644
+>
+> --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+>      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+>      h = cxl_cmd->handler;
+>
+>      if (h) {
+>
+> -        if (len == cxl_cmd->in) {
+>
+> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+>              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+>                  A_CXL_DEV_CMD_PAYLOAD;
+>
+>              ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+>
+>
+>
+>
+> This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+> namespace capacity so I'll look at what is causing that next.
+>
+> Unfortunately I'm not that familiar with the driver/nvdimm side of things
+>
+> so it's take a while to figure out what kicks off what!
+>
+>
+The whirlwind tour is that 'struct nd_region' instances that represent a
+>
+persitent memory address range are composed of one more mappings of
+>
+'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
+>
+in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
+>
+the dimm (if locked) and interrogating the label area to look for
+>
+namespace labels.
+>
+>
+The label command calls are routed to the '->ndctl()' callback that was
+>
+registered when the CXL nvdimm_bus_descriptor was created. That callback
+>
+handles both 'bus' scope calls, currently none for CXL, and per nvdimm
+>
+calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
+>
+to CXL commands.
+>
+>
+The 'struct nvdimm' objects that the CXL side registers have the
+>
+NDD_LABELING flag set which means that namespaces need to be explicitly
+>
+created / provisioned from region capacity. Otherwise, if
+>
+drivers/nvdimm/dimm.c does not find a namespace-label-index block then
+>
+the region reverts to label-less mode and a default namespace equal to
+>
+the size of the region is instantiated.
+>
+>
+If you are seeing small mismatches in namespace capacity then it may
+>
+just be the fact that by default 'ndctl create-namespace' results in an
+>
+'fsdax' mode namespace which just means that it is a block device where
+>
+1.5% of the capacity is reserved for 'struct page' metadata. You should
+>
+be able to see namespace capacity == region capacity by doing "ndctl
+>
+create-namespace -m raw", and disable DAX operation.
+Currently ndctl create-namespace crashes qemu ;)
+Which isn't ideal!
+
+>
+>
+Hope that helps.
+Got me looking at the right code. Thanks!
+
+Jonathan
+
+On Fri, 12 Aug 2022 17:15:09 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Fri, 12 Aug 2022 09:03:02 -0700
+>
+Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+> Jonathan Cameron wrote:
+>
+> > On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+> >
+>
+> > > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> > >
+>
+> > > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > > >
+>
+> > > > > Hi Jonathan
+>
+> > > > >
+>
+> > > > > Thanks for your reply!
+>
+> > > > >
+>
+> > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > > >
+>
+> > > > > > Probably not related to your problem, but there is a disconnect
+>
+> > > > > > in QEMU /
+>
+> > > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
+>
+> > > > > > only
+>
+> > > > > > has a single root port. Spec allows it to be provided or not as
+>
+> > > > > > an implementation choice.
+>
+> > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > > >
+>
+> > > > > > The temporary solution is to throw in a second root port on the
+>
+> > > > > > HB and not
+>
+> > > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > > that the particular
+>
+> > > > > > decoder defaults to pass through settings in QEMU if there is
+>
+> > > > > > only one root port.
+>
+> > > > > >
+>
+> > > > >
+>
+> > > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > > region successfully.
+>
+> > > > > But have some errors in Nvdimm:
+>
+> > > > >
+>
+> > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > > assuming node 0
+>
+> > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > > assuming node 0
+>
+> > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > > > >
+>
+> > > >
+>
+> > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > > list to chase
+>
+> > > > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > > > which is what
+>
+> > > > I've been using to test (Which wasn't true until earlier this week).
+>
+> > > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > > because it makes
+>
+> > > > that much sense anymore.
+>
+> > >
+>
+> > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > > be particularly hard to do and will take a look in next few days.
+>
+> > >
+>
+> > > Very very indirectly this error is causing a driver probe fail that
+>
+> > > means that
+>
+> > > we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> > > Should not have gotten near that path though - hence the problem is
+>
+> > > actually
+>
+> > > when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> > > we haven't fully connected up the command in QEMU.
+>
+> >
+>
+> > So a least one bug in QEMU. We were not supporting variable length
+>
+> > payloads on mailbox
+>
+> > inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> > writes.
+>
+> > We just need to relax condition on the supplied length.
+>
+> >
+>
+> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> > index c352a935c4..fdda9529fe 100644
+>
+> > --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> > +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+> >      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+> >      h = cxl_cmd->handler;
+>
+> >      if (h) {
+>
+> > -        if (len == cxl_cmd->in) {
+>
+> > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+> >              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+> >                  A_CXL_DEV_CMD_PAYLOAD;
+>
+> >              ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+> >
+>
+> >
+>
+> > This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+> > namespace capacity so I'll look at what is causing that next.
+>
+> > Unfortunately I'm not that familiar with the driver/nvdimm side of things
+>
+> > so it's take a while to figure out what kicks off what!
+>
+>
+>
+> The whirlwind tour is that 'struct nd_region' instances that represent a
+>
+> persitent memory address range are composed of one more mappings of
+>
+> 'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
+>
+> in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
+>
+> the dimm (if locked) and interrogating the label area to look for
+>
+> namespace labels.
+>
+>
+>
+> The label command calls are routed to the '->ndctl()' callback that was
+>
+> registered when the CXL nvdimm_bus_descriptor was created. That callback
+>
+> handles both 'bus' scope calls, currently none for CXL, and per nvdimm
+>
+> calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
+>
+> to CXL commands.
+>
+>
+>
+> The 'struct nvdimm' objects that the CXL side registers have the
+>
+> NDD_LABELING flag set which means that namespaces need to be explicitly
+>
+> created / provisioned from region capacity. Otherwise, if
+>
+> drivers/nvdimm/dimm.c does not find a namespace-label-index block then
+>
+> the region reverts to label-less mode and a default namespace equal to
+>
+> the size of the region is instantiated.
+>
+>
+>
+> If you are seeing small mismatches in namespace capacity then it may
+>
+> just be the fact that by default 'ndctl create-namespace' results in an
+>
+> 'fsdax' mode namespace which just means that it is a block device where
+>
+> 1.5% of the capacity is reserved for 'struct page' metadata. You should
+>
+> be able to see namespace capacity == region capacity by doing "ndctl
+>
+> create-namespace -m raw", and disable DAX operation.
+>
+>
+Currently ndctl create-namespace crashes qemu ;)
+>
+Which isn't ideal!
+>
+Found a cause for this one.  Mailbox payload may be as small as 256 bytes.
+We have code in kernel sanity checking that output payload fits in the
+mailbox, but nothing on the input payload.  Symptom is that we write just
+off the end whatever size the payload is.  Note doing this shouldn't crash
+qemu - so I need to fix a range check somewhere.
+
+I think this is because cxl_pmem_get_config_size() returns the mailbox
+payload size as being the available LSA size, forgetting to remove the
+size of the headers on the set_lsa side of things.
+https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git/tree/drivers/cxl/pmem.c?h=next#n110
+I've hacked the max_payload to be -8
+
+Now we still don't succeed in creating the namespace, but bonus is it doesn't 
+crash any more.
+
+
+Jonathan
+
+
+
+>
+>
+>
+> Hope that helps.
+>
+Got me looking at the right code. Thanks!
+>
+>
+Jonathan
+>
+>
+
+On Mon, 15 Aug 2022 15:18:09 +0100
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+
+>
+On Fri, 12 Aug 2022 17:15:09 +0100
+>
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+> On Fri, 12 Aug 2022 09:03:02 -0700
+>
+> Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+>
+> > Jonathan Cameron wrote:
+>
+> > > On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> > > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+> > >
+>
+> > > > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > >
+>
+> > > > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > > > >
+>
+> > > > > > Hi Jonathan
+>
+> > > > > >
+>
+> > > > > > Thanks for your reply!
+>
+> > > > > >
+>
+> > > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > > > >
+>
+> > > > > > > Probably not related to your problem, but there is a disconnect
+>
+> > > > > > > in QEMU /
+>
+> > > > > > > kernel assumptionsaround the presence of an HDM decoder when a
+>
+> > > > > > > HB only
+>
+> > > > > > > has a single root port. Spec allows it to be provided or not as
+>
+> > > > > > > an implementation choice.
+>
+> > > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > > > >
+>
+> > > > > > > The temporary solution is to throw in a second root port on the
+>
+> > > > > > > HB and not
+>
+> > > > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > > > that the particular
+>
+> > > > > > > decoder defaults to pass through settings in QEMU if there is
+>
+> > > > > > > only one root port.
+>
+> > > > > > >
+>
+> > > > > >
+>
+> > > > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > > > region successfully.
+>
+> > > > > > But have some errors in Nvdimm:
+>
+> > > > > >
+>
+> > > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > > > assuming node 0
+>
+> > > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > > > assuming node 0
+>
+> > > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing
+>
+> > > > > > probe
+>
+> > > > >
+>
+> > > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > > > list to chase
+>
+> > > > > down. Once I reach this state I can verify the HDM Decode is
+>
+> > > > > correct which is what
+>
+> > > > > I've been using to test (Which wasn't true until earlier this
+>
+> > > > > week).
+>
+> > > > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > > > because it makes
+>
+> > > > > that much sense anymore.
+>
+> > > >
+>
+> > > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > > > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > > > be particularly hard to do and will take a look in next few days.
+>
+> > > >
+>
+> > > > Very very indirectly this error is causing a driver probe fail that
+>
+> > > > means that
+>
+> > > > we hit a code path that has a rather odd looking check on
+>
+> > > > NDD_LABELING.
+>
+> > > > Should not have gotten near that path though - hence the problem is
+>
+> > > > actually
+>
+> > > > when we call cxl_pmem_get_config_data() and it returns an error
+>
+> > > > because
+>
+> > > > we haven't fully connected up the command in QEMU.
+>
+> > >
+>
+> > > So a least one bug in QEMU. We were not supporting variable length
+>
+> > > payloads on mailbox
+>
+> > > inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> > > writes.
+>
+> > > We just need to relax condition on the supplied length.
+>
+> > >
+>
+> > > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> > > index c352a935c4..fdda9529fe 100644
+>
+> > > --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> > > +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> > > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+> > >      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+> > >      h = cxl_cmd->handler;
+>
+> > >      if (h) {
+>
+> > > -        if (len == cxl_cmd->in) {
+>
+> > > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+> > >              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+> > >                  A_CXL_DEV_CMD_PAYLOAD;
+>
+> > >              ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+> > >
+>
+> > >
+>
+> > > This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+> > > namespace capacity so I'll look at what is causing that next.
+>
+> > > Unfortunately I'm not that familiar with the driver/nvdimm side of
+>
+> > > things
+>
+> > > so it's take a while to figure out what kicks off what!
+>
+> >
+>
+> > The whirlwind tour is that 'struct nd_region' instances that represent a
+>
+> > persitent memory address range are composed of one more mappings of
+>
+> > 'struct nvdimm' objects. The nvdimm object is driven by the dimm driver
+>
+> > in drivers/nvdimm/dimm.c. That driver is mainly charged with unlocking
+>
+> > the dimm (if locked) and interrogating the label area to look for
+>
+> > namespace labels.
+>
+> >
+>
+> > The label command calls are routed to the '->ndctl()' callback that was
+>
+> > registered when the CXL nvdimm_bus_descriptor was created. That callback
+>
+> > handles both 'bus' scope calls, currently none for CXL, and per nvdimm
+>
+> > calls. cxl_pmem_nvdimm_ctl() translates those generic LIBNVDIMM commands
+>
+> > to CXL commands.
+>
+> >
+>
+> > The 'struct nvdimm' objects that the CXL side registers have the
+>
+> > NDD_LABELING flag set which means that namespaces need to be explicitly
+>
+> > created / provisioned from region capacity. Otherwise, if
+>
+> > drivers/nvdimm/dimm.c does not find a namespace-label-index block then
+>
+> > the region reverts to label-less mode and a default namespace equal to
+>
+> > the size of the region is instantiated.
+>
+> >
+>
+> > If you are seeing small mismatches in namespace capacity then it may
+>
+> > just be the fact that by default 'ndctl create-namespace' results in an
+>
+> > 'fsdax' mode namespace which just means that it is a block device where
+>
+> > 1.5% of the capacity is reserved for 'struct page' metadata. You should
+>
+> > be able to see namespace capacity == region capacity by doing "ndctl
+>
+> > create-namespace -m raw", and disable DAX operation.
+>
+>
+>
+> Currently ndctl create-namespace crashes qemu ;)
+>
+> Which isn't ideal!
+>
+>
+>
+>
+Found a cause for this one.  Mailbox payload may be as small as 256 bytes.
+>
+We have code in kernel sanity checking that output payload fits in the
+>
+mailbox, but nothing on the input payload.  Symptom is that we write just
+>
+off the end whatever size the payload is.  Note doing this shouldn't crash
+>
+qemu - so I need to fix a range check somewhere.
+>
+>
+I think this is because cxl_pmem_get_config_size() returns the mailbox
+>
+payload size as being the available LSA size, forgetting to remove the
+>
+size of the headers on the set_lsa side of things.
+>
+https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git/tree/drivers/cxl/pmem.c?h=next#n110
+>
+>
+I've hacked the max_payload to be -8
+>
+>
+Now we still don't succeed in creating the namespace, but bonus is it doesn't
+>
+crash any more.
+In the interests of defensive / correct handling from QEMU I took a
+look into why it was crashing.  Turns out that providing a NULL write callback 
+for
+the memory device region (that the above overlarge write was spilling into) 
+isn't
+a safe thing to do.  Needs a stub. Oops.
+
+On plus side we might never have noticed this was going wrong without the crash
+*silver lining in every cloud*
+
+Fix to follow...
+
+Jonathan
+
+
+>
+>
+>
+Jonathan
+>
+>
+>
+>
+> >
+>
+> > Hope that helps.
+>
+> Got me looking at the right code. Thanks!
+>
+>
+>
+> Jonathan
+>
+>
+>
+>
+>
+>
+
+On Mon, 15 Aug 2022 at 15:55, Jonathan Cameron via <qemu-arm@nongnu.org> wrote:
+>
+In the interests of defensive / correct handling from QEMU I took a
+>
+look into why it was crashing.  Turns out that providing a NULL write
+>
+callback for
+>
+the memory device region (that the above overlarge write was spilling into)
+>
+isn't
+>
+a safe thing to do.  Needs a stub. Oops.
+Yeah. We've talked before about adding an assert so that that kind of
+"missing function" bug is caught at device creation rather than only
+if the guest tries to access the device, but we never quite got around
+to it...
+
+-- PMM
+
+On Fri, 12 Aug 2022 16:44:03 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Thu, 11 Aug 2022 18:08:57 +0100
+>
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+> On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+>
+> > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> >
+>
+> > > Hi Jonathan
+>
+> > >
+>
+> > > Thanks for your reply!
+>
+> > >
+>
+> > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > >
+>
+> > > > Probably not related to your problem, but there is a disconnect in
+>
+> > > > QEMU /
+>
+> > > > kernel assumptionsaround the presence of an HDM decoder when a HB only
+>
+> > > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > > implementation choice.
+>
+> > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > >
+>
+> > > > The temporary solution is to throw in a second root port on the HB
+>
+> > > > and not
+>
+> > > > connect anything to it.  Longer term I may special case this so that
+>
+> > > > the particular
+>
+> > > > decoder defaults to pass through settings in QEMU if there is only
+>
+> > > > one root port.
+>
+> > > >
+>
+> > >
+>
+> > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > region successfully.
+>
+> > > But have some errors in Nvdimm:
+>
+> > >
+>
+> > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > assuming node 0
+>
+> > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > assuming node 0
+>
+> > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > >
+>
+> >
+>
+> > Ah. I've seen this one, but not chased it down yet.  Was on my todo list
+>
+> > to chase
+>
+> > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > which is what
+>
+> > I've been using to test (Which wasn't true until earlier this week).
+>
+> > I'm currently testing via devmem, more for historical reasons than
+>
+> > because it makes
+>
+> > that much sense anymore.
+>
+>
+>
+> *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> I'd forgotten that was still on the todo list. I don't think it will
+>
+> be particularly hard to do and will take a look in next few days.
+>
+>
+>
+> Very very indirectly this error is causing a driver probe fail that means
+>
+> that
+>
+> we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> Should not have gotten near that path though - hence the problem is actually
+>
+> when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> we haven't fully connected up the command in QEMU.
+>
+>
+So a least one bug in QEMU. We were not supporting variable length payloads
+>
+on mailbox
+>
+inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+writes.
+>
+We just need to relax condition on the supplied length.
+>
+>
+diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+index c352a935c4..fdda9529fe 100644
+>
+--- a/hw/cxl/cxl-mailbox-utils.c
+>
++++ b/hw/cxl/cxl-mailbox-utils.c
+>
+@@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+h = cxl_cmd->handler;
+>
+if (h) {
+>
+-        if (len == cxl_cmd->in) {
+>
++        if (len == cxl_cmd->in || !cxl_cmd->in) {
+Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
+
+With that fixed we hit new fun paths - after some errors we get the
+worrying - not totally sure but looks like a failure on an error cleanup.
+I'll chase down the error source, but even then this is probably triggerable by
+hardware problem or similar.  Some bonus prints in here from me chasing
+error paths, but it's otherwise just cxl/next + the fix I posted earlier today.
+
+[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
+[   69.920108] nd_region_probe
+[   69.920623] ------------[ cut here ]------------
+[   69.920675] refcount_t: addition on 0; use-after-free.
+[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25 
+refcount_warn_saturate+0xa0/0x144
+[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi 
+cxl_core
+[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
+[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
+[   69.931482] Workqueue: events_unbound async_run_entry_fn
+[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
+[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
+[   69.936541] sp : ffff80000890b960
+[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27: 0000000000000000
+[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24: 0000000000000000
+[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21: ffff0000c5254800
+[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18: ffffffffffffffff
+[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15: 0000000000000000
+[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12: 657466612d657375
+[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffffa54a8f63d288
+[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 00000000fffff31e
+[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 : ffff5ab66e5ef000
+root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 : 
+0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
+[   69.957098] Call trace:
+[   69.957959]  refcount_warn_saturate+0xa0/0x144
+[   69.958773]  get_ndd+0x5c/0x80
+[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
+[   69.960253]  nd_region_probe+0x100/0x290
+[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
+[   69.962087]  really_probe+0x19c/0x3f0
+[   69.962620]  __driver_probe_device+0x11c/0x190
+[   69.963258]  driver_probe_device+0x44/0xf4
+[   69.963773]  __device_attach_driver+0xa4/0x140
+[   69.964471]  bus_for_each_drv+0x84/0xe0
+[   69.965068]  __device_attach+0xb0/0x1f0
+[   69.966101]  device_initial_probe+0x20/0x30
+[   69.967142]  bus_probe_device+0xa4/0xb0
+[   69.968104]  device_add+0x3e8/0x910
+[   69.969111]  nd_async_device_register+0x24/0x74
+[   69.969928]  async_run_entry_fn+0x40/0x150
+[   69.970725]  process_one_work+0x1dc/0x450
+[   69.971796]  worker_thread+0x154/0x450
+[   69.972700]  kthread+0x118/0x120
+[   69.974141]  ret_from_fork+0x10/0x20
+[   69.975141] ---[ end trace 0000000000000000 ]---
+[   70.117887] Into nd_namespace_pmem_set_resource()
+
+>
+cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+A_CXL_DEV_CMD_PAYLOAD;
+>
+ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+>
+>
+This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+namespace capacity so I'll look at what is causing that next.
+>
+Unfortunately I'm not that familiar with the driver/nvdimm side of things
+>
+so it's take a while to figure out what kicks off what!
+>
+>
+Jonathan
+>
+>
+>
+>
+> Jonathan
+>
+>
+>
+>
+>
+> >
+>
+> > >
+>
+> > > And x4 region still failed with same errors, using latest cxl/preview
+>
+> > > branch don't work.
+>
+> > > I have picked "Two CXL emulation fixes" patches in qemu, still not
+>
+> > > working.
+>
+> > >
+>
+> > > Bob
+>
+>
+>
+>
+>
+
+On Mon, 15 Aug 2022 18:04:44 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Fri, 12 Aug 2022 16:44:03 +0100
+>
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+> On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> >
+>
+> > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > >
+>
+> > > > Hi Jonathan
+>
+> > > >
+>
+> > > > Thanks for your reply!
+>
+> > > >
+>
+> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > >
+>
+> > > > > Probably not related to your problem, but there is a disconnect in
+>
+> > > > > QEMU /
+>
+> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
+>
+> > > > > only
+>
+> > > > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > > > implementation choice.
+>
+> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > >
+>
+> > > > > The temporary solution is to throw in a second root port on the HB
+>
+> > > > > and not
+>
+> > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > that the particular
+>
+> > > > > decoder defaults to pass through settings in QEMU if there is only
+>
+> > > > > one root port.
+>
+> > > > >
+>
+> > > >
+>
+> > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > region successfully.
+>
+> > > > But have some errors in Nvdimm:
+>
+> > > >
+>
+> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > > >
+>
+> > >
+>
+> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > list to chase
+>
+> > > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > > which is what
+>
+> > > I've been using to test (Which wasn't true until earlier this week).
+>
+> > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > because it makes
+>
+> > > that much sense anymore.
+>
+> >
+>
+> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > be particularly hard to do and will take a look in next few days.
+>
+> >
+>
+> > Very very indirectly this error is causing a driver probe fail that means
+>
+> > that
+>
+> > we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> > Should not have gotten near that path though - hence the problem is
+>
+> > actually
+>
+> > when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> > we haven't fully connected up the command in QEMU.
+>
+>
+>
+> So a least one bug in QEMU. We were not supporting variable length payloads
+>
+> on mailbox
+>
+> inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> writes.
+>
+> We just need to relax condition on the supplied length.
+>
+>
+>
+> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> index c352a935c4..fdda9529fe 100644
+>
+> --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+>      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+>      h = cxl_cmd->handler;
+>
+>      if (h) {
+>
+> -        if (len == cxl_cmd->in) {
+>
+> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
+Cause of the error is a failure in GET_LSA.
+Reason, payload length is wrong in QEMU but was hidden previously by my wrong
+fix here.  Probably still a good idea to inject an error in GET_LSA and chase
+down the refcount issue.
+
+
+diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+index fdda9529fe..e8565fbd6e 100644
+--- a/hw/cxl/cxl-mailbox-utils.c
++++ b/hw/cxl/cxl-mailbox-utils.c
+@@ -489,7 +489,7 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
+         cmd_identify_memory_device, 0, 0 },
+     [CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
+         cmd_ccls_get_partition_info, 0, 0 },
+-    [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 0, 0 },
++    [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 8, 0 },
+     [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa,
+         ~0, IMMEDIATE_CONFIG_CHANGE | IMMEDIATE_DATA_CHANGE },
+     [MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST",
+@@ -510,12 +510,13 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+     cxl_cmd = &cxl_cmd_set[set][cmd];
+     h = cxl_cmd->handler;
+     if (h) {
+-        if (len == cxl_cmd->in || !cxl_cmd->in) {
++        if (len == cxl_cmd->in || cxl_cmd->in == ~0) {
+             cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+                 A_CXL_DEV_CMD_PAYLOAD;
+
+And woot, we get a namespace in the LSA :)
+
+I'll post QEMU fixes in next day or two.  Kernel side now seems more or less
+fine be it with suspicious refcount underflow.
+
+>
+>
+With that fixed we hit new fun paths - after some errors we get the
+>
+worrying - not totally sure but looks like a failure on an error cleanup.
+>
+I'll chase down the error source, but even then this is probably triggerable
+>
+by
+>
+hardware problem or similar.  Some bonus prints in here from me chasing
+>
+error paths, but it's otherwise just cxl/next + the fix I posted earlier
+>
+today.
+>
+>
+[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
+>
+[   69.920108] nd_region_probe
+>
+[   69.920623] ------------[ cut here ]------------
+>
+[   69.920675] refcount_t: addition on 0; use-after-free.
+>
+[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
+>
+refcount_warn_saturate+0xa0/0x144
+>
+[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi
+>
+cxl_core
+>
+[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
+>
+[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
+>
+[   69.931482] Workqueue: events_unbound async_run_entry_fn
+>
+[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+>
+[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
+>
+[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
+>
+[   69.936541] sp : ffff80000890b960
+>
+[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
+>
+0000000000000000
+>
+[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
+>
+0000000000000000
+>
+[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
+>
+ffff0000c5254800
+>
+[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
+>
+ffffffffffffffff
+>
+[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
+>
+0000000000000000
+>
+[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
+>
+657466612d657375
+>
+[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
+>
+ffffa54a8f63d288
+>
+[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
+>
+00000000fffff31e
+>
+[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
+>
+ffff5ab66e5ef000
+>
+root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
+>
+0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
+>
+[   69.957098] Call trace:
+>
+[   69.957959]  refcount_warn_saturate+0xa0/0x144
+>
+[   69.958773]  get_ndd+0x5c/0x80
+>
+[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
+>
+[   69.960253]  nd_region_probe+0x100/0x290
+>
+[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
+>
+[   69.962087]  really_probe+0x19c/0x3f0
+>
+[   69.962620]  __driver_probe_device+0x11c/0x190
+>
+[   69.963258]  driver_probe_device+0x44/0xf4
+>
+[   69.963773]  __device_attach_driver+0xa4/0x140
+>
+[   69.964471]  bus_for_each_drv+0x84/0xe0
+>
+[   69.965068]  __device_attach+0xb0/0x1f0
+>
+[   69.966101]  device_initial_probe+0x20/0x30
+>
+[   69.967142]  bus_probe_device+0xa4/0xb0
+>
+[   69.968104]  device_add+0x3e8/0x910
+>
+[   69.969111]  nd_async_device_register+0x24/0x74
+>
+[   69.969928]  async_run_entry_fn+0x40/0x150
+>
+[   69.970725]  process_one_work+0x1dc/0x450
+>
+[   69.971796]  worker_thread+0x154/0x450
+>
+[   69.972700]  kthread+0x118/0x120
+>
+[   69.974141]  ret_from_fork+0x10/0x20
+>
+[   69.975141] ---[ end trace 0000000000000000 ]---
+>
+[   70.117887] Into nd_namespace_pmem_set_resource()
+>
+>
+>              cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+>
+>                  A_CXL_DEV_CMD_PAYLOAD;
+>
+>              ret = (*h)(cxl_cmd, cxl_dstate, &len);
+>
+>
+>
+>
+>
+> This lets the nvdimm/region probe fine, but I'm getting some issues with
+>
+> namespace capacity so I'll look at what is causing that next.
+>
+> Unfortunately I'm not that familiar with the driver/nvdimm side of things
+>
+> so it's take a while to figure out what kicks off what!
+>
+>
+>
+> Jonathan
+>
+>
+>
+> >
+>
+> > Jonathan
+>
+> >
+>
+> >
+>
+> > >
+>
+> > > >
+>
+> > > > And x4 region still failed with same errors, using latest cxl/preview
+>
+> > > > branch don't work.
+>
+> > > > I have picked "Two CXL emulation fixes" patches in qemu, still not
+>
+> > > > working.
+>
+> > > >
+>
+> > > > Bob
+>
+> >
+>
+> >
+>
+>
+>
+
+Jonathan Cameron wrote:
+>
+On Fri, 12 Aug 2022 16:44:03 +0100
+>
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+> On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> >
+>
+> > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > >
+>
+> > > > Hi Jonathan
+>
+> > > >
+>
+> > > > Thanks for your reply!
+>
+> > > >
+>
+> > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > >
+>
+> > > > > Probably not related to your problem, but there is a disconnect in
+>
+> > > > > QEMU /
+>
+> > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
+>
+> > > > > only
+>
+> > > > > has a single root port. Spec allows it to be provided or not as an
+>
+> > > > > implementation choice.
+>
+> > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > >
+>
+> > > > > The temporary solution is to throw in a second root port on the HB
+>
+> > > > > and not
+>
+> > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > that the particular
+>
+> > > > > decoder defaults to pass through settings in QEMU if there is only
+>
+> > > > > one root port.
+>
+> > > > >
+>
+> > > >
+>
+> > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > region successfully.
+>
+> > > > But have some errors in Nvdimm:
+>
+> > > >
+>
+> > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > assuming node 0
+>
+> > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > > >
+>
+> > >
+>
+> > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > list to chase
+>
+> > > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > > which is what
+>
+> > > I've been using to test (Which wasn't true until earlier this week).
+>
+> > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > because it makes
+>
+> > > that much sense anymore.
+>
+> >
+>
+> > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > be particularly hard to do and will take a look in next few days.
+>
+> >
+>
+> > Very very indirectly this error is causing a driver probe fail that means
+>
+> > that
+>
+> > we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> > Should not have gotten near that path though - hence the problem is
+>
+> > actually
+>
+> > when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> > we haven't fully connected up the command in QEMU.
+>
+>
+>
+> So a least one bug in QEMU. We were not supporting variable length payloads
+>
+> on mailbox
+>
+> inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> writes.
+>
+> We just need to relax condition on the supplied length.
+>
+>
+>
+> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> index c352a935c4..fdda9529fe 100644
+>
+> --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+>      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+>      h = cxl_cmd->handler;
+>
+>      if (h) {
+>
+> -        if (len == cxl_cmd->in) {
+>
+> +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
+>
+>
+With that fixed we hit new fun paths - after some errors we get the
+>
+worrying - not totally sure but looks like a failure on an error cleanup.
+>
+I'll chase down the error source, but even then this is probably triggerable
+>
+by
+>
+hardware problem or similar.  Some bonus prints in here from me chasing
+>
+error paths, but it's otherwise just cxl/next + the fix I posted earlier
+>
+today.
+One of the scenarios that I cannot rule out is nvdimm_probe() racing
+nd_region_probe(), but given all the work it takes to create a region I
+suspect all the nvdimm_probe() work to have completed...
+
+It is at least one potentially wrong hypothesis that needs to be chased
+down.
+
+>
+>
+[   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
+>
+[   69.920108] nd_region_probe
+>
+[   69.920623] ------------[ cut here ]------------
+>
+[   69.920675] refcount_t: addition on 0; use-after-free.
+>
+[   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
+>
+refcount_warn_saturate+0xa0/0x144
+>
+[   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port cxl_acpi
+>
+cxl_core
+>
+[   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+ #399
+>
+[   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
+>
+[   69.931482] Workqueue: events_unbound async_run_entry_fn
+>
+[   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+>
+[   69.934023] pc : refcount_warn_saturate+0xa0/0x144
+>
+[   69.935161] lr : refcount_warn_saturate+0xa0/0x144
+>
+[   69.936541] sp : ffff80000890b960
+>
+[   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
+>
+0000000000000000
+>
+[   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
+>
+0000000000000000
+>
+[   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
+>
+ffff0000c5254800
+>
+[   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
+>
+ffffffffffffffff
+>
+[   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
+>
+0000000000000000
+>
+[   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
+>
+657466612d657375
+>
+[   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
+>
+ffffa54a8f63d288
+>
+[   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
+>
+00000000fffff31e
+>
+[   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
+>
+ffff5ab66e5ef000
+>
+root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
+>
+0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
+>
+[   69.957098] Call trace:
+>
+[   69.957959]  refcount_warn_saturate+0xa0/0x144
+>
+[   69.958773]  get_ndd+0x5c/0x80
+>
+[   69.959294]  nd_region_register_namespaces+0xe4/0xe90
+>
+[   69.960253]  nd_region_probe+0x100/0x290
+>
+[   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
+>
+[   69.962087]  really_probe+0x19c/0x3f0
+>
+[   69.962620]  __driver_probe_device+0x11c/0x190
+>
+[   69.963258]  driver_probe_device+0x44/0xf4
+>
+[   69.963773]  __device_attach_driver+0xa4/0x140
+>
+[   69.964471]  bus_for_each_drv+0x84/0xe0
+>
+[   69.965068]  __device_attach+0xb0/0x1f0
+>
+[   69.966101]  device_initial_probe+0x20/0x30
+>
+[   69.967142]  bus_probe_device+0xa4/0xb0
+>
+[   69.968104]  device_add+0x3e8/0x910
+>
+[   69.969111]  nd_async_device_register+0x24/0x74
+>
+[   69.969928]  async_run_entry_fn+0x40/0x150
+>
+[   69.970725]  process_one_work+0x1dc/0x450
+>
+[   69.971796]  worker_thread+0x154/0x450
+>
+[   69.972700]  kthread+0x118/0x120
+>
+[   69.974141]  ret_from_fork+0x10/0x20
+>
+[   69.975141] ---[ end trace 0000000000000000 ]---
+>
+[   70.117887] Into nd_namespace_pmem_set_resource()
+
+On Mon, 15 Aug 2022 15:55:15 -0700
+Dan Williams <dan.j.williams@intel.com> wrote:
+
+>
+Jonathan Cameron wrote:
+>
+> On Fri, 12 Aug 2022 16:44:03 +0100
+>
+> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+>
+> > On Thu, 11 Aug 2022 18:08:57 +0100
+>
+> > Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+> >
+>
+> > > On Tue, 9 Aug 2022 17:08:25 +0100
+>
+> > > Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+> > >
+>
+> > > > On Tue, 9 Aug 2022 21:07:06 +0800
+>
+> > > > Bobo WL <lmw.bobo@gmail.com> wrote:
+>
+> > > >
+>
+> > > > > Hi Jonathan
+>
+> > > > >
+>
+> > > > > Thanks for your reply!
+>
+> > > > >
+>
+> > > > > On Mon, Aug 8, 2022 at 8:37 PM Jonathan Cameron
+>
+> > > > > <Jonathan.Cameron@huawei.com> wrote:
+>
+> > > > > >
+>
+> > > > > > Probably not related to your problem, but there is a disconnect
+>
+> > > > > > in QEMU /
+>
+> > > > > > kernel assumptionsaround the presence of an HDM decoder when a HB
+>
+> > > > > > only
+>
+> > > > > > has a single root port. Spec allows it to be provided or not as
+>
+> > > > > > an implementation choice.
+>
+> > > > > > Kernel assumes it isn't provide. Qemu assumes it is.
+>
+> > > > > >
+>
+> > > > > > The temporary solution is to throw in a second root port on the
+>
+> > > > > > HB and not
+>
+> > > > > > connect anything to it.  Longer term I may special case this so
+>
+> > > > > > that the particular
+>
+> > > > > > decoder defaults to pass through settings in QEMU if there is
+>
+> > > > > > only one root port.
+>
+> > > > > >
+>
+> > > > >
+>
+> > > > > You are right! After adding an extra HB in qemu, I can create a x1
+>
+> > > > > region successfully.
+>
+> > > > > But have some errors in Nvdimm:
+>
+> > > > >
+>
+> > > > > [   74.925838] Unknown online node for memory at 0x10000000000,
+>
+> > > > > assuming node 0
+>
+> > > > > [   74.925846] Unknown target node for memory at 0x10000000000,
+>
+> > > > > assuming node 0
+>
+> > > > > [   74.927470] nd_region region0: nmem0: is disabled, failing probe
+>
+> > > > >
+>
+> > > >
+>
+> > > > Ah. I've seen this one, but not chased it down yet.  Was on my todo
+>
+> > > > list to chase
+>
+> > > > down. Once I reach this state I can verify the HDM Decode is correct
+>
+> > > > which is what
+>
+> > > > I've been using to test (Which wasn't true until earlier this week).
+>
+> > > > I'm currently testing via devmem, more for historical reasons than
+>
+> > > > because it makes
+>
+> > > > that much sense anymore.
+>
+> > >
+>
+> > > *embarassed cough*.  We haven't fully hooked the LSA up in qemu yet.
+>
+> > > I'd forgotten that was still on the todo list. I don't think it will
+>
+> > > be particularly hard to do and will take a look in next few days.
+>
+> > >
+>
+> > > Very very indirectly this error is causing a driver probe fail that
+>
+> > > means that
+>
+> > > we hit a code path that has a rather odd looking check on NDD_LABELING.
+>
+> > > Should not have gotten near that path though - hence the problem is
+>
+> > > actually
+>
+> > > when we call cxl_pmem_get_config_data() and it returns an error because
+>
+> > > we haven't fully connected up the command in QEMU.
+>
+> >
+>
+> > So a least one bug in QEMU. We were not supporting variable length
+>
+> > payloads on mailbox
+>
+> > inputs (but were on outputs).  That hasn't mattered until we get to LSA
+>
+> > writes.
+>
+> > We just need to relax condition on the supplied length.
+>
+> >
+>
+> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
+>
+> > index c352a935c4..fdda9529fe 100644
+>
+> > --- a/hw/cxl/cxl-mailbox-utils.c
+>
+> > +++ b/hw/cxl/cxl-mailbox-utils.c
+>
+> > @@ -510,7 +510,7 @@ void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+>
+> >      cxl_cmd = &cxl_cmd_set[set][cmd];
+>
+> >      h = cxl_cmd->handler;
+>
+> >      if (h) {
+>
+> > -        if (len == cxl_cmd->in) {
+>
+> > +        if (len == cxl_cmd->in || !cxl_cmd->in) {
+>
+> Fix is wrong as we use ~0 as the placeholder for variable payload, not 0.
+>
+>
+>
+> With that fixed we hit new fun paths - after some errors we get the
+>
+> worrying - not totally sure but looks like a failure on an error cleanup.
+>
+> I'll chase down the error source, but even then this is probably
+>
+> triggerable by
+>
+> hardware problem or similar.  Some bonus prints in here from me chasing
+>
+> error paths, but it's otherwise just cxl/next + the fix I posted earlier
+>
+> today.
+>
+>
+One of the scenarios that I cannot rule out is nvdimm_probe() racing
+>
+nd_region_probe(), but given all the work it takes to create a region I
+>
+suspect all the nvdimm_probe() work to have completed...
+>
+>
+It is at least one potentially wrong hypothesis that needs to be chased
+>
+down.
+Maybe there should be a special award for the non-intuitive 
+ndctl create-namespace command (modifies existing namespace and might create
+a different empty one...) I'm sure there is some interesting history behind 
+that one :)
+
+Upshot is I just threw a filesystem on fsdax and wrote some text files on it
+to allow easy grepping. The right data ends up in the memory and a plausible
+namespace description is stored in the LSA.
+
+So to some degree at least it's 'working' on an 8 way direct connected
+set of emulated devices.
+
+One snag is that serial number support isn't yet upstream in QEMU.
+(I have had it in my tree for a while but not posted it yet because of
+ QEMU feature freeze)
+https://gitlab.com/jic23/qemu/-/commit/144c783ea8a5fbe169f46ea1ba92940157f42733
+That's needed for meaningful cookie generation.  Otherwise you can build the
+namespace once, but it won't work on next probe as the cookie is 0 and you
+hit some error paths.
+
+Maybe sensible to add a sanity check and fail namespace creation if
+cookie is 0?  (Silly side question, but is there a theoretical risk of
+a serial number / other data combination leading to a fletcher64()
+checksum that happens to be 0 - that would give a very odd bug report!)
+
+So to make it work the following is needed:
+
+1) The kernel fix for mailbox buffer overflow.
+2) Qemu fix for size of arguements for get_lsa
+3) Qemu fix to allow variable size input arguements (for set_lsa)
+4) Serial number patch above + command lines to qemu to set appropriate
+   serial numbers.
+
+I'll send out the QEMU fixes shortly and post the Serial number patch,
+though that almost certainly won't go in until next QEMU development
+cycle starts in a few weeks.
+
+Next up, run through same tests on some other topologies.
+
+Jonathan
+
+>
+>
+>
+>
+> [   69.919877] nd_bus ndbus0: START: nd_region.probe(region0)
+>
+> [   69.920108] nd_region_probe
+>
+> [   69.920623] ------------[ cut here ]------------
+>
+> [   69.920675] refcount_t: addition on 0; use-after-free.
+>
+> [   69.921314] WARNING: CPU: 3 PID: 710 at lib/refcount.c:25
+>
+> refcount_warn_saturate+0xa0/0x144
+>
+> [   69.926949] Modules linked in: cxl_pmem cxl_mem cxl_pci cxl_port
+>
+> cxl_acpi cxl_core
+>
+> [   69.928830] CPU: 3 PID: 710 Comm: kworker/u8:9 Not tainted 5.19.0-rc3+
+>
+> #399
+>
+> [   69.930596] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0
+>
+> 02/06/2015
+>
+> [   69.931482] Workqueue: events_unbound async_run_entry_fn
+>
+> [   69.932403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
+>
+> BTYPE=--)
+>
+> [   69.934023] pc : refcount_warn_saturate+0xa0/0x144
+>
+> [   69.935161] lr : refcount_warn_saturate+0xa0/0x144
+>
+> [   69.936541] sp : ffff80000890b960
+>
+> [   69.937921] x29: ffff80000890b960 x28: 0000000000000000 x27:
+>
+> 0000000000000000
+>
+> [   69.940917] x26: ffffa54a90d5cb10 x25: ffffa54a90809e98 x24:
+>
+> 0000000000000000
+>
+> [   69.942537] x23: ffffa54a91a3d8d8 x22: ffff0000c5254800 x21:
+>
+> ffff0000c5254800
+>
+> [   69.944013] x20: ffff0000ce924180 x19: ffff0000c5254800 x18:
+>
+> ffffffffffffffff
+>
+> [   69.946100] x17: ffff5ab66e5ef000 x16: ffff80000801c000 x15:
+>
+> 0000000000000000
+>
+> [   69.947585] x14: 0000000000000001 x13: 0a2e656572662d72 x12:
+>
+> 657466612d657375
+>
+> [   69.948670] x11: 203b30206e6f206e x10: 6f69746964646120 x9 :
+>
+> ffffa54a8f63d288
+>
+> [   69.950679] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 :
+>
+> 00000000fffff31e
+>
+> [   69.952113] x5 : ffff0000ff61ba08 x4 : 00000000fffff31e x3 :
+>
+> ffff5ab66e5ef000
+>
+> root@debian:/sys/bus/cxl/devices/decoder0.0/region0# [   69.954752] x2 :
+>
+> 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c512e740
+>
+> [   69.957098] Call trace:
+>
+> [   69.957959]  refcount_warn_saturate+0xa0/0x144
+>
+> [   69.958773]  get_ndd+0x5c/0x80
+>
+> [   69.959294]  nd_region_register_namespaces+0xe4/0xe90
+>
+> [   69.960253]  nd_region_probe+0x100/0x290
+>
+> [   69.960796]  nvdimm_bus_probe+0xf4/0x1c0
+>
+> [   69.962087]  really_probe+0x19c/0x3f0
+>
+> [   69.962620]  __driver_probe_device+0x11c/0x190
+>
+> [   69.963258]  driver_probe_device+0x44/0xf4
+>
+> [   69.963773]  __device_attach_driver+0xa4/0x140
+>
+> [   69.964471]  bus_for_each_drv+0x84/0xe0
+>
+> [   69.965068]  __device_attach+0xb0/0x1f0
+>
+> [   69.966101]  device_initial_probe+0x20/0x30
+>
+> [   69.967142]  bus_probe_device+0xa4/0xb0
+>
+> [   69.968104]  device_add+0x3e8/0x910
+>
+> [   69.969111]  nd_async_device_register+0x24/0x74
+>
+> [   69.969928]  async_run_entry_fn+0x40/0x150
+>
+> [   69.970725]  process_one_work+0x1dc/0x450
+>
+> [   69.971796]  worker_thread+0x154/0x450
+>
+> [   69.972700]  kthread+0x118/0x120
+>
+> [   69.974141]  ret_from_fork+0x10/0x20
+>
+> [   69.975141] ---[ end trace 0000000000000000 ]---
+>
+> [   70.117887] Into nd_namespace_pmem_set_resource()
+
+Bobo WL wrote:
+>
+Hi list
+>
+>
+I want to test cxl functions in arm64, and found some problems I can't
+>
+figure out.
+>
+>
+My test environment:
+>
+>
+1. build latest bios from
+https://github.com/tianocore/edk2.git
+master
+>
+branch(cc2db6ebfb6d9d85ba4c7b35fba1fa37fffc0bc2)
+>
+2. build latest qemu-system-aarch64 from git://git.qemu.org/qemu.git
+>
+master branch(846dcf0ba4eff824c295f06550b8673ff3f31314). With cxl arm
+>
+support patch:
+>
+https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
+>
+3. build Linux kernel from
+>
+https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
+preview
+>
+branch(65fc1c3d26b96002a5aa1f4012fae4dc98fd5683)
+>
+4. build latest ndctl tools from
+https://github.com/pmem/ndctl
+>
+create_region branch(8558b394e449779e3a4f3ae90fae77ede0bca159)
+>
+>
+And my qemu test commands:
+>
+sudo $QEMU_BIN -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 \
+>
+-cpu max -smp 8 -nographic -no-reboot \
+>
+-kernel $KERNEL -bios $BIOS_BIN \
+>
+-drive if=none,file=$ROOTFS,format=qcow2,id=hd \
+>
+-device virtio-blk-pci,drive=hd -append 'root=/dev/vda1
+>
+nokaslr dyndbg="module cxl* +p"' \
+>
+-object memory-backend-ram,size=4G,id=mem0 \
+>
+-numa node,nodeid=0,cpus=0-7,memdev=mem0 \
+>
+-net nic -net user,hostfwd=tcp::2222-:22 -enable-kvm \
+>
+-object
+>
+memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M
+>
+\
+>
+-object
+>
+memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M
+>
+\
+>
+-device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+>
+-device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+>
+-device cxl-upstream,bus=root_port0,id=us0 \
+>
+-device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+>
+-device
+>
+cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
+>
+-device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+>
+-device
+>
+cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
+>
+-device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+>
+-device
+>
+cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
+>
+-device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+>
+-device
+>
+cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
+>
+-M
+>
+cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
+>
+>
+And I have got two problems.
+>
+1. When I want to create x1 region with command: "cxl create-region -d
+>
+decoder0.0 -w 1 -g 4096 mem0", kernel crashed with null pointer
+>
+reference. Crash log:
+>
+>
+[  534.697324] cxl_region region0: config state: 0
+>
+[  534.697346] cxl_region region0: probe: -6
+>
+[  534.697368] cxl_acpi ACPI0017:00: decoder0.0: created region0
+>
+[  534.699115] cxl region0: mem0:endpoint3 decoder3.0 add:
+>
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+>
+[  534.699149] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+>
+[  534.699167] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+>
+[  534.699176] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+>
+[  534.699182] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+>
+for mem0:decoder3.0 @ 0
+>
+[  534.699189] cxl region0: 0000:0d:00.0:port2 iw: 1 ig: 256
+>
+[  534.699193] cxl region0: 0000:0d:00.0:port2 target[0] =
+>
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+>
+[  534.699405] Unable to handle kernel NULL pointer dereference at
+>
+virtual address 0000000000000000
+>
+[  534.701474] Mem abort info:
+>
+[  534.701994]   ESR = 0x0000000086000004
+>
+[  534.702653]   EC = 0x21: IABT (current EL), IL = 32 bits
+>
+[  534.703616]   SET = 0, FnV = 0
+>
+[  534.704174]   EA = 0, S1PTW = 0
+>
+[  534.704803]   FSC = 0x04: level 0 translation fault
+>
+[  534.705694] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010144a000
+>
+[  534.706875] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
+>
+[  534.709855] Internal error: Oops: 86000004 [#1] PREEMPT SMP
+>
+[  534.710301] Modules linked in:
+>
+[  534.710546] CPU: 7 PID: 331 Comm: cxl Not tainted
+>
+5.19.0-rc3-00064-g65fc1c3d26b9-dirty #11
+>
+[  534.715393] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
+>
+[  534.717179] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+>
+[  534.719190] pc : 0x0
+>
+[  534.719928] lr : commit_store+0x118/0x2cc
+>
+[  534.721007] sp : ffff80000aec3c30
+>
+[  534.721793] x29: ffff80000aec3c30 x28: ffff0000da62e740 x27:
+>
+ffff0000c0c06b30
+>
+[  534.723875] x26: 0000000000000000 x25: ffff0000c0a2a400 x24:
+>
+ffff0000c0a29400
+>
+[  534.725440] x23: 0000000000000003 x22: 0000000000000000 x21:
+>
+ffff0000c0c06800
+>
+[  534.727312] x20: 0000000000000000 x19: ffff0000c1559800 x18:
+>
+0000000000000000
+>
+[  534.729138] x17: 0000000000000000 x16: 0000000000000000 x15:
+>
+0000ffffd41fe838
+>
+[  534.731046] x14: 0000000000000000 x13: 0000000000000000 x12:
+>
+0000000000000000
+>
+[  534.732402] x11: 0000000000000000 x10: 0000000000000000 x9 :
+>
+0000000000000000
+>
+[  534.734432] x8 : 0000000000000000 x7 : 0000000000000000 x6 :
+>
+ffff0000c0906e80
+>
+[  534.735921] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
+>
+ffff80000aec3bf0
+>
+[  534.737437] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
+>
+ffff0000c155a000
+>
+[  534.738878] Call trace:
+>
+[  534.739368]  0x0
+>
+[  534.739713]  dev_attr_store+0x1c/0x30
+>
+[  534.740186]  sysfs_kf_write+0x48/0x58
+>
+[  534.740961]  kernfs_fop_write_iter+0x128/0x184
+>
+[  534.741872]  new_sync_write+0xdc/0x158
+>
+[  534.742706]  vfs_write+0x1ac/0x2a8
+>
+[  534.743440]  ksys_write+0x68/0xf0
+>
+[  534.744328]  __arm64_sys_write+0x1c/0x28
+>
+[  534.745180]  invoke_syscall+0x44/0xf0
+>
+[  534.745989]  el0_svc_common+0x4c/0xfc
+>
+[  534.746661]  do_el0_svc+0x60/0xa8
+>
+[  534.747378]  el0_svc+0x2c/0x78
+>
+[  534.748066]  el0t_64_sync_handler+0xb8/0x12c
+>
+[  534.748919]  el0t_64_sync+0x18c/0x190
+>
+[  534.749629] Code: bad PC value
+>
+[  534.750169] ---[ end trace 0000000000000000 ]---
+What was the top kernel commit when you ran this test? What is the line
+number of "commit_store+0x118"?
+
+>
+2. When I want to create x4 region with command: "cxl create-region -d
+>
+decoder0.0 -w 4 -g 4096 -m mem0 mem1 mem2 mem3". I got below errors:
+>
+>
+cxl region: create_region: region0: failed to set target3 to mem3
+>
+cxl region: cmd_create_region: created 0 regions
+>
+>
+And kernel log as below:
+>
+[   60.536663] cxl_region region0: config state: 0
+>
+[   60.536675] cxl_region region0: probe: -6
+>
+[   60.536696] cxl_acpi ACPI0017:00: decoder0.0: created region0
+>
+[   60.538251] cxl region0: mem0:endpoint3 decoder3.0 add:
+>
+mem0:decoder3.0 @ 0 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.538278] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem0:decoder3.0 @ 0 next: mem0 nr_eps: 1 nr_targets: 1
+>
+[   60.538295] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem0:decoder3.0 @ 0 next: 0000:0d:00.0 nr_eps: 1 nr_targets: 1
+>
+[   60.538647] cxl region0: mem1:endpoint4 decoder4.0 add:
+>
+mem1:decoder4.0 @ 1 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.538663] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem1:decoder4.0 @ 1 next: mem1 nr_eps: 2 nr_targets: 2
+>
+[   60.538675] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem1:decoder4.0 @ 1 next: 0000:0d:00.0 nr_eps: 2 nr_targets: 1
+>
+[   60.539311] cxl region0: mem2:endpoint5 decoder5.0 add:
+>
+mem2:decoder5.0 @ 2 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.539332] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem2:decoder5.0 @ 2 next: mem2 nr_eps: 3 nr_targets: 3
+>
+[   60.539343] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem2:decoder5.0 @ 2 next: 0000:0d:00.0 nr_eps: 3 nr_targets: 1
+>
+[   60.539711] cxl region0: mem3:endpoint6 decoder6.0 add:
+>
+mem3:decoder6.0 @ 3 next: none nr_eps: 1 nr_targets: 1
+>
+[   60.539723] cxl region0: 0000:0d:00.0:port2 decoder2.0 add:
+>
+mem3:decoder6.0 @ 3 next: mem3 nr_eps: 4 nr_targets: 4
+>
+[   60.539735] cxl region0: ACPI0016:00:port1 decoder1.0 add:
+>
+mem3:decoder6.0 @ 3 next: 0000:0d:00.0 nr_eps: 4 nr_targets: 1
+>
+[   60.539742] cxl region0: ACPI0016:00:port1 iw: 1 ig: 256
+>
+[   60.539747] cxl region0: ACPI0016:00:port1 target[0] = 0000:0c:00.0
+>
+for mem0:decoder3.0 @ 0
+>
+[   60.539754] cxl region0: 0000:0d:00.0:port2 iw: 4 ig: 512
+>
+[   60.539758] cxl region0: 0000:0d:00.0:port2 target[0] =
+>
+0000:0e:00.0 for mem0:decoder3.0 @ 0
+>
+[   60.539764] cxl region0: ACPI0016:00:port1: cannot host mem1:decoder4.0 at
+>
+1
+>
+>
+I have tried to write sysfs node manually, got same errors.
+>
+>
+Hope I can get some helps here.
+What is the output of:
+
+    cxl list -MDTu -d decoder0.0
+
+...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+at least not in the specified order, or that validation check is broken.
+
+Hi Dan,
+
+Thanks for your reply!
+
+On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+What is the output of:
+>
+>
+cxl list -MDTu -d decoder0.0
+>
+>
+...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+at least not in the specified order, or that validation check is broken.
+Command "cxl list -MDTu -d decoder0.0" output:
+
+[
+  {
+    "memdevs":[
+      {
+        "memdev":"mem2",
+        "pmem_size":"256.00 MiB (268.44 MB)",
+        "ram_size":0,
+        "serial":"0",
+        "host":"0000:11:00.0"
+      },
+      {
+        "memdev":"mem1",
+        "pmem_size":"256.00 MiB (268.44 MB)",
+        "ram_size":0,
+        "serial":"0",
+        "host":"0000:10:00.0"
+      },
+      {
+        "memdev":"mem0",
+        "pmem_size":"256.00 MiB (268.44 MB)",
+        "ram_size":0,
+        "serial":"0",
+        "host":"0000:0f:00.0"
+      },
+      {
+        "memdev":"mem3",
+        "pmem_size":"256.00 MiB (268.44 MB)",
+        "ram_size":0,
+        "serial":"0",
+        "host":"0000:12:00.0"
+      }
+    ]
+  },
+  {
+    "root decoders":[
+      {
+        "decoder":"decoder0.0",
+        "resource":"0x10000000000",
+        "size":"4.00 GiB (4.29 GB)",
+        "pmem_capable":true,
+        "volatile_capable":true,
+        "accelmem_capable":true,
+        "nr_targets":1,
+        "targets":[
+          {
+            "target":"ACPI0016:01",
+            "alias":"pci0000:0c",
+            "position":0,
+            "id":"0xc"
+          }
+        ]
+      }
+    ]
+  }
+]
+
+Bobo WL wrote:
+>
+Hi Dan,
+>
+>
+Thanks for your reply!
+>
+>
+On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+>
+> What is the output of:
+>
+>
+>
+>     cxl list -MDTu -d decoder0.0
+>
+>
+>
+> ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+> at least not in the specified order, or that validation check is broken.
+>
+>
+Command "cxl list -MDTu -d decoder0.0" output:
+Thanks for this, I think I know the problem, but will try some
+experiments with cxl_test first.
+
+Did the commit_store() crash stop reproducing with latest cxl/preview
+branch?
+
+On Tue, Aug 9, 2022 at 11:17 PM Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+Bobo WL wrote:
+>
+> Hi Dan,
+>
+>
+>
+> Thanks for your reply!
+>
+>
+>
+> On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
+>
+> wrote:
+>
+> >
+>
+> > What is the output of:
+>
+> >
+>
+> >     cxl list -MDTu -d decoder0.0
+>
+> >
+>
+> > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+> > at least not in the specified order, or that validation check is broken.
+>
+>
+>
+> Command "cxl list -MDTu -d decoder0.0" output:
+>
+>
+Thanks for this, I think I know the problem, but will try some
+>
+experiments with cxl_test first.
+>
+>
+Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+branch?
+No, still hitting this bug if don't add extra HB device in qemu
+
+Dan Williams wrote:
+>
+Bobo WL wrote:
+>
+> Hi Dan,
+>
+>
+>
+> Thanks for your reply!
+>
+>
+>
+> On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
+>
+> wrote:
+>
+> >
+>
+> > What is the output of:
+>
+> >
+>
+> >     cxl list -MDTu -d decoder0.0
+>
+> >
+>
+> > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+> > at least not in the specified order, or that validation check is broken.
+>
+>
+>
+> Command "cxl list -MDTu -d decoder0.0" output:
+>
+>
+Thanks for this, I think I know the problem, but will try some
+>
+experiments with cxl_test first.
+Hmm, so my cxl_test experiment unfortunately passed so I'm not
+reproducing the failure mode. This is the result of creating x4 region
+with devices directly attached to a single host-bridge:
+
+# cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s $((1<<30))
+{
+  "region":"region8",
+  "resource":"0xf1f0000000",
+  "size":"1024.00 MiB (1073.74 MB)",
+  "interleave_ways":4,
+  "interleave_granularity":256,
+  "decode_state":"commit",
+  "mappings":[
+    {
+      "position":3,
+      "memdev":"mem11",
+      "decoder":"decoder21.0"
+    },
+    {
+      "position":2,
+      "memdev":"mem9",
+      "decoder":"decoder19.0"
+    },
+    {
+      "position":1,
+      "memdev":"mem10",
+      "decoder":"decoder20.0"
+    },
+    {
+      "position":0,
+      "memdev":"mem12",
+      "decoder":"decoder22.0"
+    }
+  ]
+}
+cxl region: cmd_create_region: created 1 region
+
+>
+Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+branch?
+I missed the answer to this question.
+
+All of these changes are now in Linus' tree perhaps give that a try and
+post the debug log again?
+
+On Thu, 11 Aug 2022 17:46:55 -0700
+Dan Williams <dan.j.williams@intel.com> wrote:
+
+>
+Dan Williams wrote:
+>
+> Bobo WL wrote:
+>
+> > Hi Dan,
+>
+> >
+>
+> > Thanks for your reply!
+>
+> >
+>
+> > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
+>
+> > wrote:
+>
+> > >
+>
+> > > What is the output of:
+>
+> > >
+>
+> > >     cxl list -MDTu -d decoder0.0
+>
+> > >
+>
+> > > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+> > > at least not in the specified order, or that validation check is
+>
+> > > broken.
+>
+> >
+>
+> > Command "cxl list -MDTu -d decoder0.0" output:
+>
+>
+>
+> Thanks for this, I think I know the problem, but will try some
+>
+> experiments with cxl_test first.
+>
+>
+Hmm, so my cxl_test experiment unfortunately passed so I'm not
+>
+reproducing the failure mode. This is the result of creating x4 region
+>
+with devices directly attached to a single host-bridge:
+>
+>
+# cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s $((1<<30))
+>
+{
+>
+"region":"region8",
+>
+"resource":"0xf1f0000000",
+>
+"size":"1024.00 MiB (1073.74 MB)",
+>
+"interleave_ways":4,
+>
+"interleave_granularity":256,
+>
+"decode_state":"commit",
+>
+"mappings":[
+>
+{
+>
+"position":3,
+>
+"memdev":"mem11",
+>
+"decoder":"decoder21.0"
+>
+},
+>
+{
+>
+"position":2,
+>
+"memdev":"mem9",
+>
+"decoder":"decoder19.0"
+>
+},
+>
+{
+>
+"position":1,
+>
+"memdev":"mem10",
+>
+"decoder":"decoder20.0"
+>
+},
+>
+{
+>
+"position":0,
+>
+"memdev":"mem12",
+>
+"decoder":"decoder22.0"
+>
+}
+>
+]
+>
+}
+>
+cxl region: cmd_create_region: created 1 region
+>
+>
+> Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+> branch?
+>
+>
+I missed the answer to this question.
+>
+>
+All of these changes are now in Linus' tree perhaps give that a try and
+>
+post the debug log again?
+Hi Dan,
+
+I've moved onto looking at this one.
+1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy that 
+up
+at some stage), 1 switch, 4 downstream switch ports each with a type 3
+
+I'm not getting a crash, but can't successfully setup a region.
+Upon adding the final target
+It's failing in check_last_peer() as pos < distance.
+Seems distance is 4 which makes me think it's using the wrong level of the 
+heirarchy for
+some reason or that distance check is wrong.
+Wasn't a good idea to just skip that step though as it goes boom - though
+stack trace is not useful.
+
+Jonathan
+
+On Wed, 17 Aug 2022 17:16:19 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Thu, 11 Aug 2022 17:46:55 -0700
+>
+Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+> Dan Williams wrote:
+>
+> > Bobo WL wrote:
+>
+> > > Hi Dan,
+>
+> > >
+>
+> > > Thanks for your reply!
+>
+> > >
+>
+> > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams <dan.j.williams@intel.com>
+>
+> > > wrote:
+>
+> > > >
+>
+> > > > What is the output of:
+>
+> > > >
+>
+> > > >     cxl list -MDTu -d decoder0.0
+>
+> > > >
+>
+> > > > ...? It might be the case that mem1 cannot be mapped by decoder0.0, or
+>
+> > > > at least not in the specified order, or that validation check is
+>
+> > > > broken.
+>
+> > >
+>
+> > > Command "cxl list -MDTu -d decoder0.0" output:
+>
+> >
+>
+> > Thanks for this, I think I know the problem, but will try some
+>
+> > experiments with cxl_test first.
+>
+>
+>
+> Hmm, so my cxl_test experiment unfortunately passed so I'm not
+>
+> reproducing the failure mode. This is the result of creating x4 region
+>
+> with devices directly attached to a single host-bridge:
+>
+>
+>
+> # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
+>
+> $((1<<30))
+>
+> {
+>
+>   "region":"region8",
+>
+>   "resource":"0xf1f0000000",
+>
+>   "size":"1024.00 MiB (1073.74 MB)",
+>
+>   "interleave_ways":4,
+>
+>   "interleave_granularity":256,
+>
+>   "decode_state":"commit",
+>
+>   "mappings":[
+>
+>     {
+>
+>       "position":3,
+>
+>       "memdev":"mem11",
+>
+>       "decoder":"decoder21.0"
+>
+>     },
+>
+>     {
+>
+>       "position":2,
+>
+>       "memdev":"mem9",
+>
+>       "decoder":"decoder19.0"
+>
+>     },
+>
+>     {
+>
+>       "position":1,
+>
+>       "memdev":"mem10",
+>
+>       "decoder":"decoder20.0"
+>
+>     },
+>
+>     {
+>
+>       "position":0,
+>
+>       "memdev":"mem12",
+>
+>       "decoder":"decoder22.0"
+>
+>     }
+>
+>   ]
+>
+> }
+>
+> cxl region: cmd_create_region: created 1 region
+>
+>
+>
+> > Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+> > branch?
+>
+>
+>
+> I missed the answer to this question.
+>
+>
+>
+> All of these changes are now in Linus' tree perhaps give that a try and
+>
+> post the debug log again?
+>
+>
+Hi Dan,
+>
+>
+I've moved onto looking at this one.
+>
+1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
+>
+that up
+>
+at some stage), 1 switch, 4 downstream switch ports each with a type 3
+>
+>
+I'm not getting a crash, but can't successfully setup a region.
+>
+Upon adding the final target
+>
+It's failing in check_last_peer() as pos < distance.
+>
+Seems distance is 4 which makes me think it's using the wrong level of the
+>
+heirarchy for
+>
+some reason or that distance check is wrong.
+>
+Wasn't a good idea to just skip that step though as it goes boom - though
+>
+stack trace is not useful.
+Turns out really weird corruption happens if you accidentally back two type3 
+devices
+with the same memory device. Who would have thought it :)
+
+That aside ignoring the check_last_peer() failure seems to make everything work 
+for this
+topology.  I'm not seeing the crash, so my guess is we fixed it somewhere along 
+the way.
+
+Now for the fun one.  I've replicated the crash if we have
+
+1HB 1*RP 1SW, 4SW-DSP, 4Type3
+
+Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be 
+programmed
+but the null pointer dereference isn't related to that.
+
+The bug is straight forward.  Not all decoders have commit callbacks... Will 
+send out
+a possible fix shortly.
+
+Jonathan
+
+
+
+>
+>
+Jonathan
+>
+>
+>
+>
+>
+>
+
+On Thu, 18 Aug 2022 17:37:40 +0100
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+
+>
+On Wed, 17 Aug 2022 17:16:19 +0100
+>
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+> On Thu, 11 Aug 2022 17:46:55 -0700
+>
+> Dan Williams <dan.j.williams@intel.com> wrote:
+>
+>
+>
+> > Dan Williams wrote:
+>
+> > > Bobo WL wrote:
+>
+> > > > Hi Dan,
+>
+> > > >
+>
+> > > > Thanks for your reply!
+>
+> > > >
+>
+> > > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams
+>
+> > > > <dan.j.williams@intel.com> wrote:
+>
+> > > > >
+>
+> > > > > What is the output of:
+>
+> > > > >
+>
+> > > > >     cxl list -MDTu -d decoder0.0
+>
+> > > > >
+>
+> > > > > ...? It might be the case that mem1 cannot be mapped by decoder0.0,
+>
+> > > > > or
+>
+> > > > > at least not in the specified order, or that validation check is
+>
+> > > > > broken.
+>
+> > > >
+>
+> > > > Command "cxl list -MDTu -d decoder0.0" output:
+>
+> > >
+>
+> > > Thanks for this, I think I know the problem, but will try some
+>
+> > > experiments with cxl_test first.
+>
+> >
+>
+> > Hmm, so my cxl_test experiment unfortunately passed so I'm not
+>
+> > reproducing the failure mode. This is the result of creating x4 region
+>
+> > with devices directly attached to a single host-bridge:
+>
+> >
+>
+> > # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
+>
+> > $((1<<30))
+>
+> > {
+>
+> >   "region":"region8",
+>
+> >   "resource":"0xf1f0000000",
+>
+> >   "size":"1024.00 MiB (1073.74 MB)",
+>
+> >   "interleave_ways":4,
+>
+> >   "interleave_granularity":256,
+>
+> >   "decode_state":"commit",
+>
+> >   "mappings":[
+>
+> >     {
+>
+> >       "position":3,
+>
+> >       "memdev":"mem11",
+>
+> >       "decoder":"decoder21.0"
+>
+> >     },
+>
+> >     {
+>
+> >       "position":2,
+>
+> >       "memdev":"mem9",
+>
+> >       "decoder":"decoder19.0"
+>
+> >     },
+>
+> >     {
+>
+> >       "position":1,
+>
+> >       "memdev":"mem10",
+>
+> >       "decoder":"decoder20.0"
+>
+> >     },
+>
+> >     {
+>
+> >       "position":0,
+>
+> >       "memdev":"mem12",
+>
+> >       "decoder":"decoder22.0"
+>
+> >     }
+>
+> >   ]
+>
+> > }
+>
+> > cxl region: cmd_create_region: created 1 region
+>
+> >
+>
+> > > Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+> > > branch?
+>
+> >
+>
+> > I missed the answer to this question.
+>
+> >
+>
+> > All of these changes are now in Linus' tree perhaps give that a try and
+>
+> > post the debug log again?
+>
+>
+>
+> Hi Dan,
+>
+>
+>
+> I've moved onto looking at this one.
+>
+> 1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
+>
+> that up
+>
+> at some stage), 1 switch, 4 downstream switch ports each with a type 3
+>
+>
+>
+> I'm not getting a crash, but can't successfully setup a region.
+>
+> Upon adding the final target
+>
+> It's failing in check_last_peer() as pos < distance.
+>
+> Seems distance is 4 which makes me think it's using the wrong level of the
+>
+> heirarchy for
+>
+> some reason or that distance check is wrong.
+>
+> Wasn't a good idea to just skip that step though as it goes boom - though
+>
+> stack trace is not useful.
+>
+>
+Turns out really weird corruption happens if you accidentally back two type3
+>
+devices
+>
+with the same memory device. Who would have thought it :)
+>
+>
+That aside ignoring the check_last_peer() failure seems to make everything
+>
+work for this
+>
+topology.  I'm not seeing the crash, so my guess is we fixed it somewhere
+>
+along the way.
+>
+>
+Now for the fun one.  I've replicated the crash if we have
+>
+>
+1HB 1*RP 1SW, 4SW-DSP, 4Type3
+>
+>
+Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be
+>
+programmed
+>
+but the null pointer dereference isn't related to that.
+>
+>
+The bug is straight forward.  Not all decoders have commit callbacks... Will
+>
+send out
+>
+a possible fix shortly.
+>
+For completeness I'm carrying this hack because I haven't gotten my head
+around the right fix for check_last_peer() failing on this test topology.
+
+diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
+index c49d9a5f1091..275e143bd748 100644
+--- a/drivers/cxl/core/region.c
++++ b/drivers/cxl/core/region.c
+@@ -978,7 +978,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
+                                rc = check_last_peer(cxled, ep, cxl_rr,
+                                                     distance);
+                                if (rc)
+-                                       return rc;
++                                       //      return rc;
+                                goto out_target_set;
+                        }
+                goto add_target;
+--
+
+I might find more bugs with more testing, but this is all the ones I've
+seen so far + in Bobo's reports.  Qemu fixes are now in upstream so
+will be there in the release. 
+
+As a reminder, testing on QEMU has a few corners...
+
+Need a patch to add serial number ECAP support. It is on list for revew,
+but will have wait for after QEMU 7.1 release (which may be next week)
+
+QEMU still assumes HDM decoder on the host bridge will be programmed.
+So if you want anything to work there should be at least
+2 RP below the HB (no need to plug anything in to one of them).
+
+I don't want to add a commandline parameter to hide the decoder in QEMU
+and detecting there is only one RP would require moving a bunch of static
+stuff into runtime code (I think).
+
+I still think we should make the kernel check to see if there is a decoder,
+but if not I might see how bad a hack it is to have QEMU ignore that decoder
+if not committed in this one special case (HB HDM decoder with only one place
+it can send stuff). Obviously that would be a break from specification
+so less than idea!
+
+Thanks,
+
+Jonathan
+
+On Fri, 19 Aug 2022 09:46:55 +0100
+Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+
+>
+On Thu, 18 Aug 2022 17:37:40 +0100
+>
+Jonathan Cameron via <qemu-devel@nongnu.org> wrote:
+>
+>
+> On Wed, 17 Aug 2022 17:16:19 +0100
+>
+> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
+>
+>
+>
+> > On Thu, 11 Aug 2022 17:46:55 -0700
+>
+> > Dan Williams <dan.j.williams@intel.com> wrote:
+>
+> >
+>
+> > > Dan Williams wrote:
+>
+> > > > Bobo WL wrote:
+>
+> > > > > Hi Dan,
+>
+> > > > >
+>
+> > > > > Thanks for your reply!
+>
+> > > > >
+>
+> > > > > On Mon, Aug 8, 2022 at 11:58 PM Dan Williams
+>
+> > > > > <dan.j.williams@intel.com> wrote:
+>
+> > > > > >
+>
+> > > > > > What is the output of:
+>
+> > > > > >
+>
+> > > > > >     cxl list -MDTu -d decoder0.0
+>
+> > > > > >
+>
+> > > > > > ...? It might be the case that mem1 cannot be mapped by
+>
+> > > > > > decoder0.0, or
+>
+> > > > > > at least not in the specified order, or that validation check is
+>
+> > > > > > broken.
+>
+> > > > >
+>
+> > > > > Command "cxl list -MDTu -d decoder0.0" output:
+>
+> > > >
+>
+> > > > Thanks for this, I think I know the problem, but will try some
+>
+> > > > experiments with cxl_test first.
+>
+> > >
+>
+> > > Hmm, so my cxl_test experiment unfortunately passed so I'm not
+>
+> > > reproducing the failure mode. This is the result of creating x4 region
+>
+> > > with devices directly attached to a single host-bridge:
+>
+> > >
+>
+> > > # cxl create-region -d decoder3.5 -w 4 -m -g 256 mem{12,10,9,11} -s
+>
+> > > $((1<<30))
+>
+> > > {
+>
+> > >   "region":"region8",
+>
+> > >   "resource":"0xf1f0000000",
+>
+> > >   "size":"1024.00 MiB (1073.74 MB)",
+>
+> > >   "interleave_ways":4,
+>
+> > >   "interleave_granularity":256,
+>
+> > >   "decode_state":"commit",
+>
+> > >   "mappings":[
+>
+> > >     {
+>
+> > >       "position":3,
+>
+> > >       "memdev":"mem11",
+>
+> > >       "decoder":"decoder21.0"
+>
+> > >     },
+>
+> > >     {
+>
+> > >       "position":2,
+>
+> > >       "memdev":"mem9",
+>
+> > >       "decoder":"decoder19.0"
+>
+> > >     },
+>
+> > >     {
+>
+> > >       "position":1,
+>
+> > >       "memdev":"mem10",
+>
+> > >       "decoder":"decoder20.0"
+>
+> > >     },
+>
+> > >     {
+>
+> > >       "position":0,
+>
+> > >       "memdev":"mem12",
+>
+> > >       "decoder":"decoder22.0"
+>
+> > >     }
+>
+> > >   ]
+>
+> > > }
+>
+> > > cxl region: cmd_create_region: created 1 region
+>
+> > >
+>
+> > > > Did the commit_store() crash stop reproducing with latest cxl/preview
+>
+> > > > branch?
+>
+> > >
+>
+> > > I missed the answer to this question.
+>
+> > >
+>
+> > > All of these changes are now in Linus' tree perhaps give that a try and
+>
+> > > post the debug log again?
+>
+> >
+>
+> > Hi Dan,
+>
+> >
+>
+> > I've moved onto looking at this one.
+>
+> > 1 HB, 2RP (to make it configure the HDM decoder in the QEMU HB, I'll tidy
+>
+> > that up
+>
+> > at some stage), 1 switch, 4 downstream switch ports each with a type 3
+>
+> >
+>
+> > I'm not getting a crash, but can't successfully setup a region.
+>
+> > Upon adding the final target
+>
+> > It's failing in check_last_peer() as pos < distance.
+>
+> > Seems distance is 4 which makes me think it's using the wrong level of
+>
+> > the heirarchy for
+>
+> > some reason or that distance check is wrong.
+>
+> > Wasn't a good idea to just skip that step though as it goes boom - though
+>
+> > stack trace is not useful.
+>
+>
+>
+> Turns out really weird corruption happens if you accidentally back two
+>
+> type3 devices
+>
+> with the same memory device. Who would have thought it :)
+>
+>
+>
+> That aside ignoring the check_last_peer() failure seems to make everything
+>
+> work for this
+>
+> topology.  I'm not seeing the crash, so my guess is we fixed it somewhere
+>
+> along the way.
+>
+>
+>
+> Now for the fun one.  I've replicated the crash if we have
+>
+>
+>
+> 1HB 1*RP 1SW, 4SW-DSP, 4Type3
+>
+>
+>
+> Now, I'd expect to see it not 'work' because the QEMU HDM decoder won't be
+>
+> programmed
+>
+> but the null pointer dereference isn't related to that.
+>
+>
+>
+> The bug is straight forward.  Not all decoders have commit callbacks...
+>
+> Will send out
+>
+> a possible fix shortly.
+>
+>
+>
+For completeness I'm carrying this hack because I haven't gotten my head
+>
+around the right fix for check_last_peer() failing on this test topology.
+>
+>
+diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
+>
+index c49d9a5f1091..275e143bd748 100644
+>
+--- a/drivers/cxl/core/region.c
+>
++++ b/drivers/cxl/core/region.c
+>
+@@ -978,7 +978,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
+>
+rc = check_last_peer(cxled, ep, cxl_rr,
+>
+distance);
+>
+if (rc)
+>
+-                                       return rc;
+>
++                                       //      return rc;
+>
+goto out_target_set;
+>
+}
+>
+goto add_target;
+I'm still carrying this hack and still haven't worked out the right fix.
+
+Suggestions welcome!  If not I'll hopefully get some time on this
+towards the end of the week.
+
+Jonathan
+
diff --git a/results/classifier/zero-shot/010/review/35170175 b/results/classifier/zero-shot/010/review/35170175
new file mode 100644
index 00000000..c4aef9d9
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/35170175
@@ -0,0 +1,545 @@
+other: 0.933
+permissions: 0.870
+graphic: 0.844
+debug: 0.830
+performance: 0.818
+semantic: 0.798
+device: 0.787
+boot: 0.719
+KVM: 0.709
+files: 0.706
+PID: 0.699
+socket: 0.681
+network: 0.666
+vnc: 0.633
+debug: 0.796
+files: 0.086
+PID: 0.072
+other: 0.014
+performance: 0.008
+semantic: 0.007
+device: 0.005
+network: 0.003
+boot: 0.003
+graphic: 0.002
+permissions: 0.002
+KVM: 0.002
+socket: 0.001
+vnc: 0.001
+
+[Qemu-devel] [BUG] QEMU crashes with dpdk virtio pmd
+
+Qemu crashes, with pre-condition:
+vm xml config with multiqueue, and the vm's driver virtio-net support 
+multi-queue
+
+reproduce steps:
+i. start dpdk testpmd in VM with the virtio nic
+ii. stop testpmd
+iii. reboot the VM
+
+This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
+multiqueue" is introduced.
+
+Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
+VM DPDK version:  DPDK-1.6.1
+
+Call Trace:
+#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
+#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
+#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
+#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
+#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
+#5  0x00007f6088fea32c in iter_remove_or_steal () from 
+/usr/lib64/libglib-2.0.so.0
+#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
+qom/object.c:410
+#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
+#8  object_unref (address@hidden) at qom/object.c:903
+#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
+git/qemu/exec.c:1154
+#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
+#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
+#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
+
+Call Trace:
+#0  0x00007fdccaeb9790 in ?? ()
+#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
+qom/object.c:405
+#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
+#3  object_unref (address@hidden) at qom/object.c:903
+#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
+git/qemu/exec.c:1154
+#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
+#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
+#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
+
+The q->tx_bh will free in virtio_net_del_queue() function, when remove virtio 
+queues 
+if the guest doesn't support multiqueue. But it might be still referenced by 
+others (eg . virtio_net_set_status()),
+which need so set NULL.
+
+diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
+index 7d091c9..98bd683 100644
+--- a/hw/net/virtio-net.c
++++ b/hw/net/virtio-net.c
+@@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n, int index)
+     if (q->tx_timer) {
+         timer_del(q->tx_timer);
+         timer_free(q->tx_timer);
++        q->tx_timer = NULL;
+     } else {
+         qemu_bh_delete(q->tx_bh);
++        q->tx_bh = NULL;
+     }
++    q->tx_waiting = 0;
+     virtio_del_queue(vdev, index * 2 + 1);
+ }
+
+From: wangyunjian 
+Sent: Monday, April 24, 2017 6:10 PM
+To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason Wang' 
+<address@hidden>
+Cc: wangyunjian <address@hidden>; caihe <address@hidden>
+Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd 
+
+Qemu crashes, with pre-condition:
+vm xml config with multiqueue, and the vm's driver virtio-net support 
+multi-queue
+
+reproduce steps:
+i. start dpdk testpmd in VM with the virtio nic
+ii. stop testpmd
+iii. reboot the VM
+
+This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
+multiqueue" is introduced.
+
+Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
+VM DPDK version:  DPDK-1.6.1
+
+Call Trace:
+#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
+#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
+#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
+#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
+#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
+#5  0x00007f6088fea32c in iter_remove_or_steal () from 
+/usr/lib64/libglib-2.0.so.0
+#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
+qom/object.c:410
+#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
+#8  object_unref (address@hidden) at qom/object.c:903
+#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
+git/qemu/exec.c:1154
+#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
+#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
+#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
+
+Call Trace:
+#0  0x00007fdccaeb9790 in ?? ()
+#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
+qom/object.c:405
+#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
+#3  object_unref (address@hidden) at qom/object.c:903
+#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
+git/qemu/exec.c:1154
+#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
+#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
+#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
+
+On 2017年04月25日 19:37, wangyunjian wrote:
+The q->tx_bh will free in virtio_net_del_queue() function, when remove virtio 
+queues
+if the guest doesn't support multiqueue. But it might be still referenced by 
+others (eg . virtio_net_set_status()),
+which need so set NULL.
+
+diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
+index 7d091c9..98bd683 100644
+--- a/hw/net/virtio-net.c
++++ b/hw/net/virtio-net.c
+@@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n, int index)
+      if (q->tx_timer) {
+          timer_del(q->tx_timer);
+          timer_free(q->tx_timer);
++        q->tx_timer = NULL;
+      } else {
+          qemu_bh_delete(q->tx_bh);
++        q->tx_bh = NULL;
+      }
++    q->tx_waiting = 0;
+      virtio_del_queue(vdev, index * 2 + 1);
+  }
+Thanks a lot for the fix.
+
+Two questions:
+- If virtio_net_set_status() is the only function that may access tx_bh,
+it looks like setting tx_waiting to zero is sufficient?
+- Can you post a formal patch for this?
+
+Thanks
+From: wangyunjian
+Sent: Monday, April 24, 2017 6:10 PM
+To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason Wang' 
+<address@hidden>
+Cc: wangyunjian <address@hidden>; caihe <address@hidden>
+Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd
+
+Qemu crashes, with pre-condition:
+vm xml config with multiqueue, and the vm's driver virtio-net support 
+multi-queue
+
+reproduce steps:
+i. start dpdk testpmd in VM with the virtio nic
+ii. stop testpmd
+iii. reboot the VM
+
+This commit "f9d6dbf0  remove virtio queues if the guest doesn't support 
+multiqueue" is introduced.
+
+Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
+VM DPDK version:  DPDK-1.6.1
+
+Call Trace:
+#0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
+#1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
+#2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
+#3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
+#4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
+#5  0x00007f6088fea32c in iter_remove_or_steal () from 
+/usr/lib64/libglib-2.0.so.0
+#6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800) at 
+qom/object.c:410
+#7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
+#8  object_unref (address@hidden) at qom/object.c:903
+#9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at 
+git/qemu/exec.c:1154
+#10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
+#11 address_space_dispatch_free (d=0x7f6090b72b90) at git/qemu/exec.c:2514
+#12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
+
+Call Trace:
+#0  0x00007fdccaeb9790 in ?? ()
+#1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at 
+qom/object.c:405
+#2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
+#3  object_unref (address@hidden) at qom/object.c:903
+#4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at 
+git/qemu/exec.c:1154
+#5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
+#6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at git/qemu/exec.c:2514
+#7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at 
+util/rcu.c:272
+#8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+#9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
+
+CCing Paolo and Stefan, since it has a relationship with bh in Qemu.
+
+>
+-----Original Message-----
+>
+From: Jason Wang [
+mailto:address@hidden
+>
+>
+>
+On 2017年04月25日 19:37, wangyunjian wrote:
+>
+> The q->tx_bh will free in virtio_net_del_queue() function, when remove
+>
+> virtio
+>
+queues
+>
+> if the guest doesn't support multiqueue. But it might be still referenced by
+>
+others (eg . virtio_net_set_status()),
+>
+> which need so set NULL.
+>
+>
+>
+> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
+>
+> index 7d091c9..98bd683 100644
+>
+> --- a/hw/net/virtio-net.c
+>
+> +++ b/hw/net/virtio-net.c
+>
+> @@ -1522,9 +1522,12 @@ static void virtio_net_del_queue(VirtIONet *n,
+>
+int index)
+>
+>       if (q->tx_timer) {
+>
+>           timer_del(q->tx_timer);
+>
+>           timer_free(q->tx_timer);
+>
+> +        q->tx_timer = NULL;
+>
+>       } else {
+>
+>           qemu_bh_delete(q->tx_bh);
+>
+> +        q->tx_bh = NULL;
+>
+>       }
+>
+> +    q->tx_waiting = 0;
+>
+>       virtio_del_queue(vdev, index * 2 + 1);
+>
+>   }
+>
+>
+Thanks a lot for the fix.
+>
+>
+Two questions:
+>
+>
+- If virtio_net_set_status() is the only function that may access tx_bh,
+>
+it looks like setting tx_waiting to zero is sufficient?
+Currently yes, but we don't assure that it works for all scenarios, so
+we set the tx_bh and tx_timer to NULL to avoid to possibly access wild pointer,
+which is the common method for usage of bh in Qemu.
+
+I have another question about the root cause of this issure.
+
+This below trace is the path of setting tx_waiting to one in 
+virtio_net_handle_tx_bh() :
+
+Breakpoint 1, virtio_net_handle_tx_bh (vdev=0x0, vq=0x7f335ad13900) at 
+/data/wyj/git/qemu/hw/net/virtio-net.c:1398
+1398    {
+(gdb) bt
+#0  virtio_net_handle_tx_bh (vdev=0x0, vq=0x7f335ad13900) at 
+/data/wyj/git/qemu/hw/net/virtio-net.c:1398
+#1  0x00007f3357bddf9c in virtio_bus_set_host_notifier (bus=<optimized out>, 
+address@hidden, address@hidden) at hw/virtio/virtio-bus.c:297
+#2  0x00007f3357a0055d in vhost_dev_disable_notifiers (address@hidden, 
+address@hidden) at /data/wyj/git/qemu/hw/virtio/vhost.c:1422
+#3  0x00007f33579e3373 in vhost_net_stop_one (net=0x7f335ad84dc0, 
+dev=0x7f335c6f5f90) at /data/wyj/git/qemu/hw/net/vhost_net.c:289
+#4  0x00007f33579e385b in vhost_net_stop (address@hidden, ncs=<optimized out>, 
+address@hidden) at /data/wyj/git/qemu/hw/net/vhost_net.c:367
+#5  0x00007f33579e15de in virtio_net_vhost_status (status=<optimized out>, 
+n=0x7f335c6f5f90) at /data/wyj/git/qemu/hw/net/virtio-net.c:176
+#6  virtio_net_set_status (vdev=0x7f335c6f5f90, status=0 '\000') at 
+/data/wyj/git/qemu/hw/net/virtio-net.c:250
+#7  0x00007f33579f8dc6 in virtio_set_status (address@hidden, address@hidden 
+'\000') at /data/wyj/git/qemu/hw/virtio/virtio.c:1146
+#8  0x00007f3357bdd3cc in virtio_ioport_write (val=0, addr=18, 
+opaque=0x7f335c6eda80) at hw/virtio/virtio-pci.c:387
+#9  virtio_pci_config_write (opaque=0x7f335c6eda80, addr=18, val=0, 
+size=<optimized out>) at hw/virtio/virtio-pci.c:511
+#10 0x00007f33579b2155 in memory_region_write_accessor (mr=0x7f335c6ee470, 
+addr=18, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized 
+out>, attrs=...) at /data/wyj/git/qemu/memory.c:526
+#11 0x00007f33579af2e9 in access_with_adjusted_size (address@hidden, 
+address@hidden, address@hidden, access_size_min=<optimized out>, 
+access_size_max=<optimized out>, address@hidden
+    0x7f33579b20f0 <memory_region_write_accessor>, address@hidden, 
+address@hidden) at /data/wyj/git/qemu/memory.c:592
+#12 0x00007f33579b2e15 in memory_region_dispatch_write (address@hidden, 
+address@hidden, data=0, address@hidden, address@hidden) at 
+/data/wyj/git/qemu/memory.c:1319
+#13 0x00007f335796cd93 in address_space_write_continue (mr=0x7f335c6ee470, l=1, 
+addr1=18, len=1, buf=0x7f335773d000 "", attrs=..., addr=49170, 
+as=0x7f3358317060 <address_space_io>) at /data/wyj/git/qemu/exec.c:2834
+#14 address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., 
+buf=<optimized out>, len=<optimized out>) at /data/wyj/git/qemu/exec.c:2879
+#15 0x00007f335796d3ad in address_space_rw (as=<optimized out>, address@hidden, 
+attrs=..., address@hidden, buf=<optimized out>, address@hidden, address@hidden) 
+at /data/wyj/git/qemu/exec.c:2981
+#16 0x00007f33579ae226 in kvm_handle_io (count=1, size=1, direction=<optimized 
+out>, data=<optimized out>, attrs=..., port=49170) at 
+/data/wyj/git/qemu/kvm-all.c:1803
+#17 kvm_cpu_exec (address@hidden) at /data/wyj/git/qemu/kvm-all.c:2032
+#18 0x00007f335799b632 in qemu_kvm_cpu_thread_fn (arg=0x7f335ae82070) at 
+/data/wyj/git/qemu/cpus.c:1118
+#19 0x00007f3352983dc5 in start_thread () from /usr/lib64/libpthread.so.0
+#20 0x00007f335113571d in clone () from /usr/lib64/libc.so.6
+
+It calls qemu_bh_schedule(q->tx_bh) at the bottom of virtio_net_handle_tx_bh(),
+I don't know why virtio_net_tx_bh() doesn't be invoked, so that the 
+q->tx_waiting is not zero.
+[ps: we added logs in virtio_net_tx_bh() to verify that]
+
+Some other information: 
+
+It won't crash if we don't use vhost-net.
+
+
+Thanks,
+-Gonglei
+
+>
+- Can you post a formal patch for this?
+>
+>
+Thanks
+>
+>
+> From: wangyunjian
+>
+> Sent: Monday, April 24, 2017 6:10 PM
+>
+> To: address@hidden; Michael S. Tsirkin <address@hidden>; 'Jason
+>
+Wang' <address@hidden>
+>
+> Cc: wangyunjian <address@hidden>; caihe <address@hidden>
+>
+> Subject: [Qemu-devel][BUG] QEMU crashes with dpdk virtio pmd
+>
+>
+>
+> Qemu crashes, with pre-condition:
+>
+> vm xml config with multiqueue, and the vm's driver virtio-net support
+>
+multi-queue
+>
+>
+>
+> reproduce steps:
+>
+> i. start dpdk testpmd in VM with the virtio nic
+>
+> ii. stop testpmd
+>
+> iii. reboot the VM
+>
+>
+>
+> This commit "f9d6dbf0  remove virtio queues if the guest doesn't support
+>
+multiqueue" is introduced.
+>
+>
+>
+> Qemu version: QEMU emulator version 2.9.50 (v2.9.0-137-g32c7e0a)
+>
+> VM DPDK version:  DPDK-1.6.1
+>
+>
+>
+> Call Trace:
+>
+> #0  0x00007f60881fe5d7 in raise () from /usr/lib64/libc.so.6
+>
+> #1  0x00007f60881ffcc8 in abort () from /usr/lib64/libc.so.6
+>
+> #2  0x00007f608823e2f7 in __libc_message () from /usr/lib64/libc.so.6
+>
+> #3  0x00007f60882456d3 in _int_free () from /usr/lib64/libc.so.6
+>
+> #4  0x00007f608900158f in g_free () from /usr/lib64/libglib-2.0.so.0
+>
+> #5  0x00007f6088fea32c in iter_remove_or_steal () from
+>
+/usr/lib64/libglib-2.0.so.0
+>
+> #6  0x00007f608edc0986 in object_property_del_all (obj=0x7f6091e74800)
+>
+at qom/object.c:410
+>
+> #7  object_finalize (data=0x7f6091e74800) at qom/object.c:467
+>
+> #8  object_unref (address@hidden) at qom/object.c:903
+>
+> #9  0x00007f608eaf1fd3 in phys_section_destroy (mr=0x7f6091e74800) at
+>
+git/qemu/exec.c:1154
+>
+> #10 phys_sections_free (map=0x7f6090b72bb0) at git/qemu/exec.c:1163
+>
+> #11 address_space_dispatch_free (d=0x7f6090b72b90) at
+>
+git/qemu/exec.c:2514
+>
+> #12 0x00007f608ee91ace in call_rcu_thread (opaque=<optimized out>) at
+>
+util/rcu.c:272
+>
+> #13 0x00007f6089b0ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+>
+> #14 0x00007f60882bf71d in clone () from /usr/lib64/libc.so.6
+>
+>
+>
+> Call Trace:
+>
+> #0  0x00007fdccaeb9790 in ?? ()
+>
+> #1  0x00007fdcd82d09fc in object_property_del_all (obj=0x7fdcdb8acf60) at
+>
+qom/object.c:405
+>
+> #2  object_finalize (data=0x7fdcdb8acf60) at qom/object.c:467
+>
+> #3  object_unref (address@hidden) at qom/object.c:903
+>
+> #4  0x00007fdcd8001fd3 in phys_section_destroy (mr=0x7fdcdb8acf60) at
+>
+git/qemu/exec.c:1154
+>
+> #5  phys_sections_free (map=0x7fdcdc86aa00) at git/qemu/exec.c:1163
+>
+> #6  address_space_dispatch_free (d=0x7fdcdc86a9e0) at
+>
+git/qemu/exec.c:2514
+>
+> #7  0x00007fdcd83a1ace in call_rcu_thread (opaque=<optimized out>) at
+>
+util/rcu.c:272
+>
+> #8  0x00007fdcd301ddc5 in start_thread () from /usr/lib64/libpthread.so.0
+>
+> #9  0x00007fdcd17cf71d in clone () from /usr/lib64/libc.so.6
+>
+>
+>
+>
+
+On 25/04/2017 14:02, Jason Wang wrote:
+>
+>
+Thanks a lot for the fix.
+>
+>
+Two questions:
+>
+>
+- If virtio_net_set_status() is the only function that may access tx_bh,
+>
+it looks like setting tx_waiting to zero is sufficient?
+I think clearing tx_bh is better anyway, as leaving a dangling pointer
+is not very hygienic.
+
+Paolo
+
+>
+- Can you post a formal patch for this?
+
diff --git a/results/classifier/zero-shot/010/review/36568044 b/results/classifier/zero-shot/010/review/36568044
new file mode 100644
index 00000000..aceee555
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/36568044
@@ -0,0 +1,4605 @@
+debug: 0.939
+device: 0.931
+graphic: 0.931
+other: 0.930
+permissions: 0.927
+PID: 0.926
+semantic: 0.923
+performance: 0.920
+KVM: 0.914
+socket: 0.907
+vnc: 0.905
+network: 0.904
+boot: 0.895
+files: 0.884
+KVM: 0.717
+debug: 0.694
+socket: 0.541
+network: 0.208
+device: 0.063
+PID: 0.049
+other: 0.045
+files: 0.034
+semantic: 0.008
+performance: 0.007
+graphic: 0.004
+permissions: 0.004
+vnc: 0.003
+boot: 0.003
+
+[BUG, RFC] cpr-transfer: qxl guest driver crashes after migration
+
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+>
+EMULATOR=/path/to/emulator
+>
+ROOTFS=/path/to/image
+>
+QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>
+$EMULATOR -enable-kvm \
+>
+-machine q35 \
+>
+-cpu host -smp 2 -m 2G \
+>
+-object
+>
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+>
+-machine memory-backend=ram0 \
+>
+-machine aux-ram-share=on \
+>
+-drive file=$ROOTFS,media=disk,if=virtio \
+>
+-qmp unix:$QMPSOCK,server=on,wait=off \
+>
+-nographic \
+>
+-device qxl-vga
+Run migration target:
+>
+EMULATOR=/path/to/emulator
+>
+ROOTFS=/path/to/image
+>
+QMPSOCK=/var/run/alma8qmp-dst.sock
+>
+>
+>
+>
+$EMULATOR -enable-kvm \
+>
+-machine q35 \
+>
+-cpu host -smp 2 -m 2G \
+>
+-object
+>
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+>
+-machine memory-backend=ram0 \
+>
+-machine aux-ram-share=on \
+>
+-drive file=$ROOTFS,media=disk,if=virtio \
+>
+-qmp unix:$QMPSOCK,server=on,wait=off \
+>
+-nographic \
+>
+-device qxl-vga \
+>
+-incoming tcp:0:44444 \
+>
+-incoming '{"channel-type": "cpr", "addr": { "transport": "socket",
+>
+"type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+>
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+>
+QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>
+$QMPSHELL -p $QMPSOCK <<EOF
+>
+migrate-set-parameters mode=cpr-transfer
+>
+migrate
+>
+channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
+>
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+>
+[   73.962002] [TTM] Buffer eviction failed
+>
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
+>
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate
+>
+VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which speeds up
+the crash in the guest):
+>
+#!/bin/bash
+>
+>
+chvt 3
+>
+>
+for j in $(seq 80); do
+>
+echo "$(date) starting round $j"
+>
+if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != ""
+>
+]; then
+>
+echo "bug was reproduced after $j tries"
+>
+exit 1
+>
+fi
+>
+for i in $(seq 100); do
+>
+dmesg > /dev/tty3
+>
+done
+>
+done
+>
+>
+echo "bug could not be reproduced"
+>
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into this?  Any
+suggestions would be appreciated.  Thanks!
+
+Andrey
+
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+     -machine q35 \
+     -cpu host -smp 2 -m 2G \
+     -object 
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+     -machine memory-backend=ram0 \
+     -machine aux-ram-share=on \
+     -drive file=$ROOTFS,media=disk,if=virtio \
+     -qmp unix:$QMPSOCK,server=on,wait=off \
+     -nographic \
+     -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+-machine q35 \
+     -cpu host -smp 2 -m 2G \
+     -object 
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+     -machine memory-backend=ram0 \
+     -machine aux-ram-share=on \
+     -drive file=$ROOTFS,media=disk,if=virtio \
+     -qmp unix:$QMPSOCK,server=on,wait=off \
+     -nographic \
+     -device qxl-vga \
+     -incoming tcp:0:44444 \
+     -incoming '{"channel-type": "cpr", "addr": { "transport": "socket", "type": "unix", 
+"path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+     migrate-set-parameters mode=cpr-transfer
+     migrate 
+channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate 
+VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+         echo "$(date) starting round $j"
+         if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != "" 
+]; then
+                 echo "bug was reproduced after $j tries"
+                 exit 1
+         fi
+         for i in $(seq 100); do
+                 dmesg > /dev/tty3
+         done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+
+- Steve
+
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+     -machine q35 \
+     -cpu host -smp 2 -m 2G \
+     -object 
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+     -machine memory-backend=ram0 \
+     -machine aux-ram-share=on \
+     -drive file=$ROOTFS,media=disk,if=virtio \
+     -qmp unix:$QMPSOCK,server=on,wait=off \
+     -nographic \
+     -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+     -machine q35 \
+     -cpu host -smp 2 -m 2G \
+     -object 
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/ram0,share=on\
+     -machine memory-backend=ram0 \
+     -machine aux-ram-share=on \
+     -drive file=$ROOTFS,media=disk,if=virtio \
+     -qmp unix:$QMPSOCK,server=on,wait=off \
+     -nographic \
+     -device qxl-vga \
+     -incoming tcp:0:44444 \
+     -incoming '{"channel-type": "cpr", "addr": { "transport": "socket", "type": "unix", 
+"path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+     migrate-set-parameters mode=cpr-transfer
+     migrate 
+channels=[{"channel-type":"main","addr":{"transport":"socket","type":"inet","host":"0","port":"44444"}},{"channel-type":"cpr","addr":{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate 
+VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+         echo "$(date) starting round $j"
+         if [ "$(journalctl --boot | grep "failed to allocate VRAM BO")" != "" 
+]; then
+                 echo "bug was reproduced after $j tries"
+                 exit 1
+         fi
+         for i in $(seq 100); do
+                 dmesg > /dev/tty3
+         done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+1740667681-257312-1-git-send-email-steven.sistare@oracle.com
+/">https://lore.kernel.org/qemu-devel/
+1740667681-257312-1-git-send-email-steven.sistare@oracle.com
+/
+- Steve
+
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+>
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+>
+> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+>
+>> Hi all,
+>
+>>
+>
+>> We've been experimenting with cpr-transfer migration mode recently and
+>
+>> have discovered the following issue with the guest QXL driver:
+>
+>>
+>
+>> Run migration source:
+>
+>>> EMULATOR=/path/to/emulator
+>
+>>> ROOTFS=/path/to/image
+>
+>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>
+>
+>>> $EMULATOR -enable-kvm \
+>
+>>>      -machine q35 \
+>
+>>>      -cpu host -smp 2 -m 2G \
+>
+>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>> ram0,share=on\
+>
+>>>      -machine memory-backend=ram0 \
+>
+>>>      -machine aux-ram-share=on \
+>
+>>>      -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>      -nographic \
+>
+>>>      -device qxl-vga
+>
+>>
+>
+>> Run migration target:
+>
+>>> EMULATOR=/path/to/emulator
+>
+>>> ROOTFS=/path/to/image
+>
+>>> QMPSOCK=/var/run/alma8qmp-dst.sock
+>
+>>> $EMULATOR -enable-kvm \
+>
+>>>      -machine q35 \
+>
+>>>      -cpu host -smp 2 -m 2G \
+>
+>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>> ram0,share=on\
+>
+>>>      -machine memory-backend=ram0 \
+>
+>>>      -machine aux-ram-share=on \
+>
+>>>      -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>      -nographic \
+>
+>>>      -device qxl-vga \
+>
+>>>      -incoming tcp:0:44444 \
+>
+>>>      -incoming '{"channel-type": "cpr", "addr": { "transport":
+>
+>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+>
+>>
+>
+>>
+>
+>> Launch the migration:
+>
+>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+>
+>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>
+>
+>>> $QMPSHELL -p $QMPSOCK <<EOF
+>
+>>>      migrate-set-parameters mode=cpr-transfer
+>
+>>>      migrate channels=[{"channel-type":"main","addr":
+>
+>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
+>
+>>> {"channel-type":"cpr","addr":
+>
+>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+>
+>>> dst.sock"}}]
+>
+>>> EOF
+>
+>>
+>
+>> Then, after a while, QXL guest driver on target crashes spewing the
+>
+>> following messages:
+>
+>>> [   73.962002] [TTM] Buffer eviction failed
+>
+>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+>
+>>> 0x00000001)
+>
+>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+>
+>>> allocate VRAM BO
+>
+>>
+>
+>> That seems to be a known kernel QXL driver bug:
+>
+>>
+>
+>>
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+>
+>>
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+>
+>>
+>
+>> (the latter discussion contains that reproduce script which speeds up
+>
+>> the crash in the guest):
+>
+>>> #!/bin/bash
+>
+>>>
+>
+>>> chvt 3
+>
+>>>
+>
+>>> for j in $(seq 80); do
+>
+>>>          echo "$(date) starting round $j"
+>
+>>>          if [ "$(journalctl --boot | grep "failed to allocate VRAM
+>
+>>> BO")" != "" ]; then
+>
+>>>                  echo "bug was reproduced after $j tries"
+>
+>>>                  exit 1
+>
+>>>          fi
+>
+>>>          for i in $(seq 100); do
+>
+>>>                  dmesg > /dev/tty3
+>
+>>>          done
+>
+>>> done
+>
+>>>
+>
+>>> echo "bug could not be reproduced"
+>
+>>> exit 0
+>
+>>
+>
+>> The bug itself seems to remain unfixed, as I was able to reproduce that
+>
+>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+>
+>> cpr-transfer code also seems to be buggy as it triggers the crash -
+>
+>> without the cpr-transfer migration the above reproduce doesn't lead to
+>
+>> crash on the source VM.
+>
+>>
+>
+>> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+>
+>> rather passes it through the memory backend object, our code might
+>
+>> somehow corrupt the VRAM.  However, I wasn't able to trace the
+>
+>> corruption so far.
+>
+>>
+>
+>> Could somebody help the investigation and take a look into this?  Any
+>
+>> suggestions would be appreciated.  Thanks!
+>
+>
+>
+> Possibly some memory region created by qxl is not being preserved.
+>
+> Try adding these traces to see what is preserved:
+>
+>
+>
+> -trace enable='*cpr*'
+>
+> -trace enable='*ram_alloc*'
+>
+>
+Also try adding this patch to see if it flags any ram blocks as not
+>
+compatible with cpr.  A message is printed at migration start time.
+>
+Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
+>
+steven.sistare@oracle.com/
+>
+>
+- Steve
+>
+With the traces enabled + the "migration: ram block cpr blockers" patch
+applied:
+
+Source:
+>
+cpr_find_fd pc.bios, id 0 returns -1
+>
+cpr_save_fd pc.bios, id 0, fd 22
+>
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+>
+0x7fec18e00000
+>
+cpr_find_fd pc.rom, id 0 returns -1
+>
+cpr_save_fd pc.rom, id 0, fd 23
+>
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+>
+0x7fec18c00000
+>
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+>
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+>
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
+>
+24 host 0x7fec18a00000
+>
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+>
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+>
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
+>
+fd 25 host 0x7feb77e00000
+>
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+>
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27
+>
+host 0x7fec18800000
+>
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+>
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
+>
+fd 28 host 0x7feb73c00000
+>
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+>
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34
+>
+host 0x7fec18600000
+>
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+>
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+>
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 35
+>
+host 0x7fec18200000
+>
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+>
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+>
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36
+>
+host 0x7feb8b600000
+>
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+>
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+>
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host
+>
+0x7feb8b400000
+>
+>
+cpr_state_save cpr-transfer mode
+>
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+>
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+>
+cpr_state_load cpr-transfer mode
+>
+cpr_find_fd pc.bios, id 0 returns 20
+>
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+>
+0x7fcdc9800000
+>
+cpr_find_fd pc.rom, id 0 returns 19
+>
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+>
+0x7fcdc9600000
+>
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+>
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
+>
+18 host 0x7fcdc9400000
+>
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+>
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
+>
+fd 17 host 0x7fcd27e00000
+>
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16
+>
+host 0x7fcdc9200000
+>
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
+>
+fd 15 host 0x7fcd23c00000
+>
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+>
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14
+>
+host 0x7fcdc8800000
+>
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+>
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 13
+>
+host 0x7fcdc8400000
+>
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+>
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11
+>
+host 0x7fcdc8200000
+>
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+>
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host
+>
+0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the same
+addresses), and no incompatible ram blocks are found during migration.
+
+Andrey
+
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+>
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+>
+> On 2/28/2025 1:13 PM, Steven Sistare wrote:
+>
+>> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+>
+>>> Hi all,
+>
+>>>
+>
+>>> We've been experimenting with cpr-transfer migration mode recently and
+>
+>>> have discovered the following issue with the guest QXL driver:
+>
+>>>
+>
+>>> Run migration source:
+>
+>>>> EMULATOR=/path/to/emulator
+>
+>>>> ROOTFS=/path/to/image
+>
+>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>
+>
+>>>> $EMULATOR -enable-kvm \
+>
+>>>>      -machine q35 \
+>
+>>>>      -cpu host -smp 2 -m 2G \
+>
+>>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>>> ram0,share=on\
+>
+>>>>      -machine memory-backend=ram0 \
+>
+>>>>      -machine aux-ram-share=on \
+>
+>>>>      -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>      -nographic \
+>
+>>>>      -device qxl-vga
+>
+>>>
+>
+>>> Run migration target:
+>
+>>>> EMULATOR=/path/to/emulator
+>
+>>>> ROOTFS=/path/to/image
+>
+>>>> QMPSOCK=/var/run/alma8qmp-dst.sock
+>
+>>>> $EMULATOR -enable-kvm \
+>
+>>>>      -machine q35 \
+>
+>>>>      -cpu host -smp 2 -m 2G \
+>
+>>>>      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>>> ram0,share=on\
+>
+>>>>      -machine memory-backend=ram0 \
+>
+>>>>      -machine aux-ram-share=on \
+>
+>>>>      -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>      -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>      -nographic \
+>
+>>>>      -device qxl-vga \
+>
+>>>>      -incoming tcp:0:44444 \
+>
+>>>>      -incoming '{"channel-type": "cpr", "addr": { "transport":
+>
+>>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+>
+>>>
+>
+>>>
+>
+>>> Launch the migration:
+>
+>>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+>
+>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>
+>
+>>>> $QMPSHELL -p $QMPSOCK <<EOF
+>
+>>>>      migrate-set-parameters mode=cpr-transfer
+>
+>>>>      migrate channels=[{"channel-type":"main","addr":
+>
+>>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
+>
+>>>> {"channel-type":"cpr","addr":
+>
+>>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+>
+>>>> dst.sock"}}]
+>
+>>>> EOF
+>
+>>>
+>
+>>> Then, after a while, QXL guest driver on target crashes spewing the
+>
+>>> following messages:
+>
+>>>> [   73.962002] [TTM] Buffer eviction failed
+>
+>>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+>
+>>>> 0x00000001)
+>
+>>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+>
+>>>> allocate VRAM BO
+>
+>>>
+>
+>>> That seems to be a known kernel QXL driver bug:
+>
+>>>
+>
+>>>
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+>
+>>>
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+>
+>>>
+>
+>>> (the latter discussion contains that reproduce script which speeds up
+>
+>>> the crash in the guest):
+>
+>>>> #!/bin/bash
+>
+>>>>
+>
+>>>> chvt 3
+>
+>>>>
+>
+>>>> for j in $(seq 80); do
+>
+>>>>          echo "$(date) starting round $j"
+>
+>>>>          if [ "$(journalctl --boot | grep "failed to allocate VRAM
+>
+>>>> BO")" != "" ]; then
+>
+>>>>                  echo "bug was reproduced after $j tries"
+>
+>>>>                  exit 1
+>
+>>>>          fi
+>
+>>>>          for i in $(seq 100); do
+>
+>>>>                  dmesg > /dev/tty3
+>
+>>>>          done
+>
+>>>> done
+>
+>>>>
+>
+>>>> echo "bug could not be reproduced"
+>
+>>>> exit 0
+>
+>>>
+>
+>>> The bug itself seems to remain unfixed, as I was able to reproduce that
+>
+>>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+>
+>>> cpr-transfer code also seems to be buggy as it triggers the crash -
+>
+>>> without the cpr-transfer migration the above reproduce doesn't lead to
+>
+>>> crash on the source VM.
+>
+>>>
+>
+>>> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+>
+>>> rather passes it through the memory backend object, our code might
+>
+>>> somehow corrupt the VRAM.  However, I wasn't able to trace the
+>
+>>> corruption so far.
+>
+>>>
+>
+>>> Could somebody help the investigation and take a look into this?  Any
+>
+>>> suggestions would be appreciated.  Thanks!
+>
+>>
+>
+>> Possibly some memory region created by qxl is not being preserved.
+>
+>> Try adding these traces to see what is preserved:
+>
+>>
+>
+>> -trace enable='*cpr*'
+>
+>> -trace enable='*ram_alloc*'
+>
+>
+>
+> Also try adding this patch to see if it flags any ram blocks as not
+>
+> compatible with cpr.  A message is printed at migration start time.
+>
+> Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
+>
+> steven.sistare@oracle.com/
+>
+>
+>
+> - Steve
+>
+>
+>
+>
+With the traces enabled + the "migration: ram block cpr blockers" patch
+>
+applied:
+>
+>
+Source:
+>
+> cpr_find_fd pc.bios, id 0 returns -1
+>
+> cpr_save_fd pc.bios, id 0, fd 22
+>
+> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+>
+> 0x7fec18e00000
+>
+> cpr_find_fd pc.rom, id 0 returns -1
+>
+> cpr_save_fd pc.rom, id 0, fd 23
+>
+> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+>
+> 0x7fec18c00000
+>
+> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+>
+> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+>
+> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
+>
+> 24 host 0x7fec18a00000
+>
+> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+>
+> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+>
+> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
+>
+> fd 25 host 0x7feb77e00000
+>
+> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+>
+> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27
+>
+> host 0x7fec18800000
+>
+> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+>
+> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
+>
+> fd 28 host 0x7feb73c00000
+>
+> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+>
+> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34
+>
+> host 0x7fec18600000
+>
+> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+>
+> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+>
+> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd
+>
+> 35 host 0x7fec18200000
+>
+> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+>
+> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+>
+> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36
+>
+> host 0x7feb8b600000
+>
+> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+>
+> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+>
+> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host
+>
+> 0x7feb8b400000
+>
+>
+>
+> cpr_state_save cpr-transfer mode
+>
+> cpr_transfer_output /var/run/alma8cpr-dst.sock
+>
+>
+Target:
+>
+> cpr_transfer_input /var/run/alma8cpr-dst.sock
+>
+> cpr_state_load cpr-transfer mode
+>
+> cpr_find_fd pc.bios, id 0 returns 20
+>
+> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+>
+> 0x7fcdc9800000
+>
+> cpr_find_fd pc.rom, id 0 returns 19
+>
+> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+>
+> 0x7fcdc9600000
+>
+> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+>
+> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd
+>
+> 18 host 0x7fcdc9400000
+>
+> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+>
+> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864
+>
+> fd 17 host 0x7fcd27e00000
+>
+> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16
+>
+> host 0x7fcdc9200000
+>
+> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864
+>
+> fd 15 host 0x7fcd23c00000
+>
+> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+>
+> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14
+>
+> host 0x7fcdc8800000
+>
+> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+>
+> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd
+>
+> 13 host 0x7fcdc8400000
+>
+> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+>
+> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11
+>
+> host 0x7fcdc8200000
+>
+> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+>
+> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host
+>
+> 0x7fcd3be00000
+>
+>
+Looks like both vga.vram and qxl.vram are being preserved (with the same
+>
+addresses), and no incompatible ram blocks are found during migration.
+>
+Sorry, addressed are not the same, of course.  However corresponding ram
+blocks do seem to be preserved and initialized.
+
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+      -machine q35 \
+      -cpu host -smp 2 -m 2G \
+      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+      -machine memory-backend=ram0 \
+      -machine aux-ram-share=on \
+      -drive file=$ROOTFS,media=disk,if=virtio \
+      -qmp unix:$QMPSOCK,server=on,wait=off \
+      -nographic \
+      -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+      -machine q35 \
+      -cpu host -smp 2 -m 2G \
+      -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+      -machine memory-backend=ram0 \
+      -machine aux-ram-share=on \
+      -drive file=$ROOTFS,media=disk,if=virtio \
+      -qmp unix:$QMPSOCK,server=on,wait=off \
+      -nographic \
+      -device qxl-vga \
+      -incoming tcp:0:44444 \
+      -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+      migrate-set-parameters mode=cpr-transfer
+      migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+          echo "$(date) starting round $j"
+          if [ "$(journalctl --boot | grep "failed to allocate VRAM
+BO")" != "" ]; then
+                  echo "bug was reproduced after $j tries"
+                  exit 1
+          fi
+          for i in $(seq 100); do
+                  dmesg > /dev/tty3
+          done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+ Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers" patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host 
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host 
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd 24 
+host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864 fd 
+25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 27 host 
+0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864 fd 
+28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 34 host 
+0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 35 
+host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 36 host 
+0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 37 host 
+0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host 
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host 
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size 262144 fd 18 
+host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size 67108864 fd 
+17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192 fd 16 host 
+0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size 67108864 fd 
+15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536 fd 14 host 
+0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size 2097152 fd 13 
+host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536 fd 11 host 
+0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd 10 host 
+0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the same
+addresses), and no incompatible ram blocks are found during migration.
+Sorry, addressed are not the same, of course.  However corresponding ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+  qemu_ram_alloc_internal()
+    if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+        ram_flags |= RAM_READONLY;
+    new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+0001-hw-qxl-cpr-support-preliminary.patch
+Description:
+Text document
+
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+>
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+>
+> On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+>
+>> On 2/28/25 8:20 PM, Steven Sistare wrote:
+>
+>>> On 2/28/2025 1:13 PM, Steven Sistare wrote:
+>
+>>>> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+>
+>>>>> Hi all,
+>
+>>>>>
+>
+>>>>> We've been experimenting with cpr-transfer migration mode recently
+>
+>>>>> and
+>
+>>>>> have discovered the following issue with the guest QXL driver:
+>
+>>>>>
+>
+>>>>> Run migration source:
+>
+>>>>>> EMULATOR=/path/to/emulator
+>
+>>>>>> ROOTFS=/path/to/image
+>
+>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>>>
+>
+>>>>>> $EMULATOR -enable-kvm \
+>
+>>>>>>       -machine q35 \
+>
+>>>>>>       -cpu host -smp 2 -m 2G \
+>
+>>>>>>       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>>>>> ram0,share=on\
+>
+>>>>>>       -machine memory-backend=ram0 \
+>
+>>>>>>       -machine aux-ram-share=on \
+>
+>>>>>>       -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>>>       -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>>>       -nographic \
+>
+>>>>>>       -device qxl-vga
+>
+>>>>>
+>
+>>>>> Run migration target:
+>
+>>>>>> EMULATOR=/path/to/emulator
+>
+>>>>>> ROOTFS=/path/to/image
+>
+>>>>>> QMPSOCK=/var/run/alma8qmp-dst.sock
+>
+>>>>>> $EMULATOR -enable-kvm \
+>
+>>>>>>       -machine q35 \
+>
+>>>>>>       -cpu host -smp 2 -m 2G \
+>
+>>>>>>       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+>
+>>>>>> ram0,share=on\
+>
+>>>>>>       -machine memory-backend=ram0 \
+>
+>>>>>>       -machine aux-ram-share=on \
+>
+>>>>>>       -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>>>       -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>>>       -nographic \
+>
+>>>>>>       -device qxl-vga \
+>
+>>>>>>       -incoming tcp:0:44444 \
+>
+>>>>>>       -incoming '{"channel-type": "cpr", "addr": { "transport":
+>
+>>>>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+>
+>>>>>
+>
+>>>>>
+>
+>>>>> Launch the migration:
+>
+>>>>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+>
+>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>>>
+>
+>>>>>> $QMPSHELL -p $QMPSOCK <<EOF
+>
+>>>>>>       migrate-set-parameters mode=cpr-transfer
+>
+>>>>>>       migrate channels=[{"channel-type":"main","addr":
+>
+>>>>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
+>
+>>>>>> {"channel-type":"cpr","addr":
+>
+>>>>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+>
+>>>>>> dst.sock"}}]
+>
+>>>>>> EOF
+>
+>>>>>
+>
+>>>>> Then, after a while, QXL guest driver on target crashes spewing the
+>
+>>>>> following messages:
+>
+>>>>>> [   73.962002] [TTM] Buffer eviction failed
+>
+>>>>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+>
+>>>>>> 0x00000001)
+>
+>>>>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+>
+>>>>>> allocate VRAM BO
+>
+>>>>>
+>
+>>>>> That seems to be a known kernel QXL driver bug:
+>
+>>>>>
+>
+>>>>>
+https://lore.kernel.org/all/20220907094423.93581-1-
+>
+>>>>> min_halo@163.com/T/
+>
+>>>>>
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+>
+>>>>>
+>
+>>>>> (the latter discussion contains that reproduce script which speeds up
+>
+>>>>> the crash in the guest):
+>
+>>>>>> #!/bin/bash
+>
+>>>>>>
+>
+>>>>>> chvt 3
+>
+>>>>>>
+>
+>>>>>> for j in $(seq 80); do
+>
+>>>>>>           echo "$(date) starting round $j"
+>
+>>>>>>           if [ "$(journalctl --boot | grep "failed to allocate VRAM
+>
+>>>>>> BO")" != "" ]; then
+>
+>>>>>>                   echo "bug was reproduced after $j tries"
+>
+>>>>>>                   exit 1
+>
+>>>>>>           fi
+>
+>>>>>>           for i in $(seq 100); do
+>
+>>>>>>                   dmesg > /dev/tty3
+>
+>>>>>>           done
+>
+>>>>>> done
+>
+>>>>>>
+>
+>>>>>> echo "bug could not be reproduced"
+>
+>>>>>> exit 0
+>
+>>>>>
+>
+>>>>> The bug itself seems to remain unfixed, as I was able to reproduce
+>
+>>>>> that
+>
+>>>>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+>
+>>>>> cpr-transfer code also seems to be buggy as it triggers the crash -
+>
+>>>>> without the cpr-transfer migration the above reproduce doesn't
+>
+>>>>> lead to
+>
+>>>>> crash on the source VM.
+>
+>>>>>
+>
+>>>>> I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+>
+>>>>> rather passes it through the memory backend object, our code might
+>
+>>>>> somehow corrupt the VRAM.  However, I wasn't able to trace the
+>
+>>>>> corruption so far.
+>
+>>>>>
+>
+>>>>> Could somebody help the investigation and take a look into this?  Any
+>
+>>>>> suggestions would be appreciated.  Thanks!
+>
+>>>>
+>
+>>>> Possibly some memory region created by qxl is not being preserved.
+>
+>>>> Try adding these traces to see what is preserved:
+>
+>>>>
+>
+>>>> -trace enable='*cpr*'
+>
+>>>> -trace enable='*ram_alloc*'
+>
+>>>
+>
+>>> Also try adding this patch to see if it flags any ram blocks as not
+>
+>>> compatible with cpr.  A message is printed at migration start time.
+>
+>>>  Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+>
+>>> email-
+>
+>>> steven.sistare@oracle.com/
+>
+>>>
+>
+>>> - Steve
+>
+>>>
+>
+>>
+>
+>> With the traces enabled + the "migration: ram block cpr blockers" patch
+>
+>> applied:
+>
+>>
+>
+>> Source:
+>
+>>> cpr_find_fd pc.bios, id 0 returns -1
+>
+>>> cpr_save_fd pc.bios, id 0, fd 22
+>
+>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+>
+>>> 0x7fec18e00000
+>
+>>> cpr_find_fd pc.rom, id 0 returns -1
+>
+>>> cpr_save_fd pc.rom, id 0, fd 23
+>
+>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+>
+>>> 0x7fec18c00000
+>
+>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+>
+>>> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+>
+>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+>
+>>> 262144 fd 24 host 0x7fec18a00000
+>
+>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+>
+>>> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+>
+>>> 67108864 fd 25 host 0x7feb77e00000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+>
+>>> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+>
+>>> fd 27 host 0x7fec18800000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+>
+>>> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+>
+>>> 67108864 fd 28 host 0x7feb73c00000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+>
+>>> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+>
+>>> fd 34 host 0x7fec18600000
+>
+>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+>
+>>> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+>
+>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+>
+>>> 2097152 fd 35 host 0x7fec18200000
+>
+>>> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+>
+>>> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+>
+>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+>
+>>> fd 36 host 0x7feb8b600000
+>
+>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+>
+>>> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+>
+>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+>
+>>> 37 host 0x7feb8b400000
+>
+>>>
+>
+>>> cpr_state_save cpr-transfer mode
+>
+>>> cpr_transfer_output /var/run/alma8cpr-dst.sock
+>
+>>
+>
+>> Target:
+>
+>>> cpr_transfer_input /var/run/alma8cpr-dst.sock
+>
+>>> cpr_state_load cpr-transfer mode
+>
+>>> cpr_find_fd pc.bios, id 0 returns 20
+>
+>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+>
+>>> 0x7fcdc9800000
+>
+>>> cpr_find_fd pc.rom, id 0 returns 19
+>
+>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+>
+>>> 0x7fcdc9600000
+>
+>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+>
+>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+>
+>>> 262144 fd 18 host 0x7fcdc9400000
+>
+>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+>
+>>> 67108864 fd 17 host 0x7fcd27e00000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+>
+>>> fd 16 host 0x7fcdc9200000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+>
+>>> 67108864 fd 15 host 0x7fcd23c00000
+>
+>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+>
+>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+>
+>>> fd 14 host 0x7fcdc8800000
+>
+>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+>
+>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+>
+>>> 2097152 fd 13 host 0x7fcdc8400000
+>
+>>> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+>
+>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+>
+>>> fd 11 host 0x7fcdc8200000
+>
+>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+>
+>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+>
+>>> 10 host 0x7fcd3be00000
+>
+>>
+>
+>> Looks like both vga.vram and qxl.vram are being preserved (with the same
+>
+>> addresses), and no incompatible ram blocks are found during migration.
+>
+>
+>
+> Sorry, addressed are not the same, of course.  However corresponding ram
+>
+> blocks do seem to be preserved and initialized.
+>
+>
+So far, I have not reproduced the guest driver failure.
+>
+>
+However, I have isolated places where new QEMU improperly writes to
+>
+the qxl memory regions prior to starting the guest, by mmap'ing them
+>
+readonly after cpr:
+>
+>
+  qemu_ram_alloc_internal()
+>
+    if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+>
+        ram_flags |= RAM_READONLY;
+>
+    new_block = qemu_ram_alloc_from_fd(...)
+>
+>
+I have attached a draft fix; try it and let me know.
+>
+My console window looks fine before and after cpr, using
+>
+-vnc $hostip:0 -vga qxl
+>
+>
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?  Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+
+>
+Program terminated with signal SIGSEGV, Segmentation fault.
+>
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+>
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+>
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+>
+(gdb) bt
+>
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+>
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+>
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+>
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+>
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+>
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+>
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+>
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+>
+value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+>
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+>
+v=0x5638996f3770, name=0x56389759b141 "realized", opaque=0x5638987893d0,
+>
+errp=0x7ffd3c2b84e0)
+>
+at ../qom/object.c:2374
+>
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+>
+name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+>
+at ../qom/object.c:1449
+>
+#7  0x00005638970f8586 in object_property_set_qobject (obj=0x5638996e0e70,
+>
+name=0x56389759b141 "realized", value=0x5638996df900, errp=0x7ffd3c2b84e0)
+>
+at ../qom/qom-qobject.c:28
+>
+#8  0x00005638970f3d8d in object_property_set_bool (obj=0x5638996e0e70,
+>
+name=0x56389759b141 "realized", value=true, errp=0x7ffd3c2b84e0)
+>
+at ../qom/object.c:1519
+>
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+>
+bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+>
+#10 0x0000563896dba675 in qdev_device_add_from_qdict (opts=0x5638996dfe50,
+>
+from_json=false, errp=0x7ffd3c2b84e0) at ../system/qdev-monitor.c:714
+>
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+>
+errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+>
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0, opts=0x563898786150,
+>
+errp=0x56389855dc40 <error_fatal>) at ../system/vl.c:1207
+>
+#13 0x000056389737a6cc in qemu_opts_foreach
+>
+(list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+>
+<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+>
+at ../util/qemu-option.c:1135
+>
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/vl.c:2745
+>
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+>
+<error_fatal>) at ../system/vl.c:2806
+>
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948) at
+>
+../system/vl.c:3838
+>
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at
+>
+../system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+
+Andrey
+0001-hw-qxl-cpr-support-preliminary.patch
+Description:
+Text Data
+
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently
+and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+       -machine q35 \
+       -cpu host -smp 2 -m 2G \
+       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+       -machine memory-backend=ram0 \
+       -machine aux-ram-share=on \
+       -drive file=$ROOTFS,media=disk,if=virtio \
+       -qmp unix:$QMPSOCK,server=on,wait=off \
+       -nographic \
+       -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+       -machine q35 \
+       -cpu host -smp 2 -m 2G \
+       -object memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+       -machine memory-backend=ram0 \
+       -machine aux-ram-share=on \
+       -drive file=$ROOTFS,media=disk,if=virtio \
+       -qmp unix:$QMPSOCK,server=on,wait=off \
+       -nographic \
+       -device qxl-vga \
+       -incoming tcp:0:44444 \
+       -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+       migrate-set-parameters mode=cpr-transfer
+       migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-
+min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+           echo "$(date) starting round $j"
+           if [ "$(journalctl --boot | grep "failed to allocate VRAM
+BO")" != "" ]; then
+                   echo "bug was reproduced after $j tries"
+                   exit 1
+           fi
+           for i in $(seq 100); do
+                   dmesg > /dev/tty3
+           done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce
+that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't
+lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+  Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers" patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 24 host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 27 host 0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 34 host 0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 35 host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 36 host 0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+37 host 0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 18 host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 16 host 0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 14 host 0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 13 host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 11 host 0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+10 host 0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the same
+addresses), and no incompatible ram blocks are found during migration.
+Sorry, addressed are not the same, of course.  However corresponding ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+   qemu_ram_alloc_internal()
+     if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+         ram_flags |= RAM_READONLY;
+     new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?
+cpr does not preserve the vnc connection and session.  To test, I specify
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+dormant the dest vnc becomes active.
+Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+I have been running like that, but have not reproduced the qxl driver crash,
+and I suspect my guest image+kernel is too old.  However, once I realized the
+issue was post-cpr modification of qxl memory, I switched my attention to the
+fix.
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+(gdb) bt
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70, 
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70, 
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70, 
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70, value=true, 
+errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70, v=0x5638996f3770, 
+name=0x56389759b141 "realized", opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:2374
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70, name=0x56389759b141 
+"realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:1449
+#7  0x00005638970f8586 in object_property_set_qobject (obj=0x5638996e0e70, 
+name=0x56389759b141 "realized", value=0x5638996df900, errp=0x7ffd3c2b84e0)
+     at ../qom/qom-qobject.c:28
+#8  0x00005638970f3d8d in object_property_set_bool (obj=0x5638996e0e70, 
+name=0x56389759b141 "realized", value=true, errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:1519
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70, bus=0x563898cf3c20, 
+errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+#10 0x0000563896dba675 in qdev_device_add_from_qdict (opts=0x5638996dfe50, 
+from_json=false, errp=0x7ffd3c2b84e0) at ../system/qdev-monitor.c:714
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150, errp=0x56389855dc40 
+<error_fatal>) at ../system/qdev-monitor.c:733
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0, opts=0x563898786150, 
+errp=0x56389855dc40 <error_fatal>) at ../system/vl.c:1207
+#13 0x000056389737a6cc in qemu_opts_foreach
+     (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca <device_init_func>, 
+opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+     at ../util/qemu-option.c:1135
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/vl.c:2745
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40 
+<error_fatal>) at ../system/vl.c:2806
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948) at 
+../system/vl.c:3838
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at 
+../system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram are
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+of init_qxl_ram that modify guest memory.
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+It's a useful debugging technique, but changing protection on a large memory 
+region
+can be too expensive for production due to TLB shootdowns.
+
+Also, there are cases where writes are performed but the value is guaranteed to
+be the same:
+  qxl_post_load()
+    qxl_set_mode()
+      d->rom->mode = cpu_to_le32(modenr);
+The value is the same because mode and shadow_rom.mode were passed in vmstate
+from old qemu.
+
+- Steve
+0001-hw-qxl-cpr-support-preliminary-V2.patch
+Description:
+Text document
+
+On 3/5/25 22:19, Steven Sistare wrote:
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently
+and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+       -machine q35 \
+       -cpu host -smp 2 -m 2G \
+       -object
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+       -machine memory-backend=ram0 \
+       -machine aux-ram-share=on \
+       -drive file=$ROOTFS,media=disk,if=virtio \
+       -qmp unix:$QMPSOCK,server=on,wait=off \
+       -nographic \
+       -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+       -machine q35 \
+       -cpu host -smp 2 -m 2G \
+       -object
+memory-backend-file,id=ram0,size=2G,mem-path=/dev/shm/
+ram0,share=on\
+       -machine memory-backend=ram0 \
+       -machine aux-ram-share=on \
+       -drive file=$ROOTFS,media=disk,if=virtio \
+       -qmp unix:$QMPSOCK,server=on,wait=off \
+       -nographic \
+       -device qxl-vga \
+       -incoming tcp:0:44444 \
+       -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+       migrate-set-parameters mode=cpr-transfer
+       migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing
+the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR*
+failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-
+min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which
+speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+           echo "$(date) starting round $j"
+           if [ "$(journalctl --boot | grep "failed to
+allocate VRAM
+BO")" != "" ]; then
+                   echo "bug was reproduced after $j tries"
+                   exit 1
+           fi
+           for i in $(seq 100); do
+                   dmesg > /dev/tty3
+           done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce
+that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the
+crash -
+without the cpr-transfer migration the above reproduce doesn't
+lead to
+crash on the source VM.
+I suspect that, as cpr-transfer doesn't migrate the guest
+memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+Could somebody help the investigation and take a look into
+this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers"
+patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 24 host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 27 host 0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 34 host 0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 35 host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 36 host 0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+37 host 0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 18 host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 16 host 0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 14 host 0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 13 host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 11 host 0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+10 host 0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with
+the same
+addresses), and no incompatible ram blocks are found during
+migration.
+Sorry, addressed are not the same, of course.  However
+corresponding ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+   qemu_ram_alloc_internal()
+     if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+         ram_flags |= RAM_READONLY;
+     new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?
+cpr does not preserve the vnc connection and session.  To test, I specify
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+dormant the dest vnc becomes active.
+Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+I have been running like that, but have not reproduced the qxl driver
+crash,
+and I suspect my guest image+kernel is too old.  However, once I
+realized the
+issue was post-cpr modification of qxl memory, I switched my attention
+to the
+fix.
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+(gdb) bt
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+v=0x5638996f3770, name=0x56389759b141 "realized",
+opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:2374
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:1449
+#7  0x00005638970f8586 in object_property_set_qobject
+(obj=0x5638996e0e70, name=0x56389759b141 "realized",
+value=0x5638996df900, errp=0x7ffd3c2b84e0)
+     at ../qom/qom-qobject.c:28
+#8  0x00005638970f3d8d in object_property_set_bool
+(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
+errp=0x7ffd3c2b84e0)
+     at ../qom/object.c:1519
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+#10 0x0000563896dba675 in qdev_device_add_from_qdict
+(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at
+../system/qdev-monitor.c:714
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
+opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at
+../system/vl.c:1207
+#13 0x000056389737a6cc in qemu_opts_foreach
+     (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+     at ../util/qemu-option.c:1135
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at
+../system/vl.c:2745
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+<error_fatal>) at ../system/vl.c:2806
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
+at ../system/vl.c:3838
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at
+../system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+Thanks for the stack trace; the calls to SPICE_RING_INIT in
+init_qxl_ram are
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+of init_qxl_ram that modify guest memory.
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+It's a useful debugging technique, but changing protection on a large
+memory region
+can be too expensive for production due to TLB shootdowns.
+Good point. Though we could move this code under non-default option to
+avoid re-writing.
+
+Den
+
+On 3/5/25 11:19 PM, Steven Sistare wrote:
+>
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+>
+> On 3/4/25 9:05 PM, Steven Sistare wrote:
+>
+>> On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+>
+>>> On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+>
+>>>> On 2/28/25 8:20 PM, Steven Sistare wrote:
+>
+>>>>> On 2/28/2025 1:13 PM, Steven Sistare wrote:
+>
+>>>>>> On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+>
+>>>>>>> Hi all,
+>
+>>>>>>>
+>
+>>>>>>> We've been experimenting with cpr-transfer migration mode recently
+>
+>>>>>>> and
+>
+>>>>>>> have discovered the following issue with the guest QXL driver:
+>
+>>>>>>>
+>
+>>>>>>> Run migration source:
+>
+>>>>>>>> EMULATOR=/path/to/emulator
+>
+>>>>>>>> ROOTFS=/path/to/image
+>
+>>>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>>>>>
+>
+>>>>>>>> $EMULATOR -enable-kvm \
+>
+>>>>>>>>        -machine q35 \
+>
+>>>>>>>>        -cpu host -smp 2 -m 2G \
+>
+>>>>>>>>        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+>
+>>>>>>>> dev/shm/
+>
+>>>>>>>> ram0,share=on\
+>
+>>>>>>>>        -machine memory-backend=ram0 \
+>
+>>>>>>>>        -machine aux-ram-share=on \
+>
+>>>>>>>>        -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>>>>>        -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>>>>>        -nographic \
+>
+>>>>>>>>        -device qxl-vga
+>
+>>>>>>>
+>
+>>>>>>> Run migration target:
+>
+>>>>>>>> EMULATOR=/path/to/emulator
+>
+>>>>>>>> ROOTFS=/path/to/image
+>
+>>>>>>>> QMPSOCK=/var/run/alma8qmp-dst.sock
+>
+>>>>>>>> $EMULATOR -enable-kvm \
+>
+>>>>>>>>        -machine q35 \
+>
+>>>>>>>>        -cpu host -smp 2 -m 2G \
+>
+>>>>>>>>        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+>
+>>>>>>>> dev/shm/
+>
+>>>>>>>> ram0,share=on\
+>
+>>>>>>>>        -machine memory-backend=ram0 \
+>
+>>>>>>>>        -machine aux-ram-share=on \
+>
+>>>>>>>>        -drive file=$ROOTFS,media=disk,if=virtio \
+>
+>>>>>>>>        -qmp unix:$QMPSOCK,server=on,wait=off \
+>
+>>>>>>>>        -nographic \
+>
+>>>>>>>>        -device qxl-vga \
+>
+>>>>>>>>        -incoming tcp:0:44444 \
+>
+>>>>>>>>        -incoming '{"channel-type": "cpr", "addr": { "transport":
+>
+>>>>>>>> "socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+>
+>>>>>>>
+>
+>>>>>>>
+>
+>>>>>>> Launch the migration:
+>
+>>>>>>>> QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+>
+>>>>>>>> QMPSOCK=/var/run/alma8qmp-src.sock
+>
+>>>>>>>>
+>
+>>>>>>>> $QMPSHELL -p $QMPSOCK <<EOF
+>
+>>>>>>>>        migrate-set-parameters mode=cpr-transfer
+>
+>>>>>>>>        migrate channels=[{"channel-type":"main","addr":
+>
+>>>>>>>> {"transport":"socket","type":"inet","host":"0","port":"44444"}},
+>
+>>>>>>>> {"channel-type":"cpr","addr":
+>
+>>>>>>>> {"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+>
+>>>>>>>> dst.sock"}}]
+>
+>>>>>>>> EOF
+>
+>>>>>>>
+>
+>>>>>>> Then, after a while, QXL guest driver on target crashes spewing the
+>
+>>>>>>> following messages:
+>
+>>>>>>>> [   73.962002] [TTM] Buffer eviction failed
+>
+>>>>>>>> [   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+>
+>>>>>>>> 0x00000001)
+>
+>>>>>>>> [   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+>
+>>>>>>>> allocate VRAM BO
+>
+>>>>>>>
+>
+>>>>>>> That seems to be a known kernel QXL driver bug:
+>
+>>>>>>>
+>
+>>>>>>>
+https://lore.kernel.org/all/20220907094423.93581-1-
+>
+>>>>>>> min_halo@163.com/T/
+>
+>>>>>>>
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+>
+>>>>>>>
+>
+>>>>>>> (the latter discussion contains that reproduce script which
+>
+>>>>>>> speeds up
+>
+>>>>>>> the crash in the guest):
+>
+>>>>>>>> #!/bin/bash
+>
+>>>>>>>>
+>
+>>>>>>>> chvt 3
+>
+>>>>>>>>
+>
+>>>>>>>> for j in $(seq 80); do
+>
+>>>>>>>>            echo "$(date) starting round $j"
+>
+>>>>>>>>            if [ "$(journalctl --boot | grep "failed to allocate
+>
+>>>>>>>> VRAM
+>
+>>>>>>>> BO")" != "" ]; then
+>
+>>>>>>>>                    echo "bug was reproduced after $j tries"
+>
+>>>>>>>>                    exit 1
+>
+>>>>>>>>            fi
+>
+>>>>>>>>            for i in $(seq 100); do
+>
+>>>>>>>>                    dmesg > /dev/tty3
+>
+>>>>>>>>            done
+>
+>>>>>>>> done
+>
+>>>>>>>>
+>
+>>>>>>>> echo "bug could not be reproduced"
+>
+>>>>>>>> exit 0
+>
+>>>>>>>
+>
+>>>>>>> The bug itself seems to remain unfixed, as I was able to reproduce
+>
+>>>>>>> that
+>
+>>>>>>> with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+>
+>>>>>>> cpr-transfer code also seems to be buggy as it triggers the crash -
+>
+>>>>>>> without the cpr-transfer migration the above reproduce doesn't
+>
+>>>>>>> lead to
+>
+>>>>>>> crash on the source VM.
+>
+>>>>>>>
+>
+>>>>>>> I suspect that, as cpr-transfer doesn't migrate the guest
+>
+>>>>>>> memory, but
+>
+>>>>>>> rather passes it through the memory backend object, our code might
+>
+>>>>>>> somehow corrupt the VRAM.  However, I wasn't able to trace the
+>
+>>>>>>> corruption so far.
+>
+>>>>>>>
+>
+>>>>>>> Could somebody help the investigation and take a look into
+>
+>>>>>>> this?  Any
+>
+>>>>>>> suggestions would be appreciated.  Thanks!
+>
+>>>>>>
+>
+>>>>>> Possibly some memory region created by qxl is not being preserved.
+>
+>>>>>> Try adding these traces to see what is preserved:
+>
+>>>>>>
+>
+>>>>>> -trace enable='*cpr*'
+>
+>>>>>> -trace enable='*ram_alloc*'
+>
+>>>>>
+>
+>>>>> Also try adding this patch to see if it flags any ram blocks as not
+>
+>>>>> compatible with cpr.  A message is printed at migration start time.
+>
+>>>>>   Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+>
+>>>>> email-
+>
+>>>>> steven.sistare@oracle.com/
+>
+>>>>>
+>
+>>>>> - Steve
+>
+>>>>>
+>
+>>>>
+>
+>>>> With the traces enabled + the "migration: ram block cpr blockers"
+>
+>>>> patch
+>
+>>>> applied:
+>
+>>>>
+>
+>>>> Source:
+>
+>>>>> cpr_find_fd pc.bios, id 0 returns -1
+>
+>>>>> cpr_save_fd pc.bios, id 0, fd 22
+>
+>>>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+>
+>>>>> 0x7fec18e00000
+>
+>>>>> cpr_find_fd pc.rom, id 0 returns -1
+>
+>>>>> cpr_save_fd pc.rom, id 0, fd 23
+>
+>>>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+>
+>>>>> 0x7fec18c00000
+>
+>>>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+>
+>>>>> cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+>
+>>>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+>
+>>>>> 262144 fd 24 host 0x7fec18a00000
+>
+>>>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+>
+>>>>> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+>
+>>>>> 67108864 fd 25 host 0x7feb77e00000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+>
+>>>>> cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+>
+>>>>> fd 27 host 0x7fec18800000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+>
+>>>>> cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+>
+>>>>> 67108864 fd 28 host 0x7feb73c00000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+>
+>>>>> cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+>
+>>>>> fd 34 host 0x7fec18600000
+>
+>>>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+>
+>>>>> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+>
+>>>>> 2097152 fd 35 host 0x7fec18200000
+>
+>>>>> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+>
+>>>>> cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+>
+>>>>> fd 36 host 0x7feb8b600000
+>
+>>>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+>
+>>>>> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+>
+>>>>> 37 host 0x7feb8b400000
+>
+>>>>>
+>
+>>>>> cpr_state_save cpr-transfer mode
+>
+>>>>> cpr_transfer_output /var/run/alma8cpr-dst.sock
+>
+>>>>
+>
+>>>> Target:
+>
+>>>>> cpr_transfer_input /var/run/alma8cpr-dst.sock
+>
+>>>>> cpr_state_load cpr-transfer mode
+>
+>>>>> cpr_find_fd pc.bios, id 0 returns 20
+>
+>>>>> qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+>
+>>>>> 0x7fcdc9800000
+>
+>>>>> cpr_find_fd pc.rom, id 0 returns 19
+>
+>>>>> qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+>
+>>>>> 0x7fcdc9600000
+>
+>>>>> cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+>
+>>>>> qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+>
+>>>>> 262144 fd 18 host 0x7fcdc9400000
+>
+>>>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+>
+>>>>> 67108864 fd 17 host 0x7fcd27e00000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+>
+>>>>> fd 16 host 0x7fcdc9200000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+>
+>>>>> 67108864 fd 15 host 0x7fcd23c00000
+>
+>>>>> cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+>
+>>>>> qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+>
+>>>>> fd 14 host 0x7fcdc8800000
+>
+>>>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+>
+>>>>> 2097152 fd 13 host 0x7fcdc8400000
+>
+>>>>> cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+>
+>>>>> fd 11 host 0x7fcdc8200000
+>
+>>>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+>
+>>>>> qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+>
+>>>>> 10 host 0x7fcd3be00000
+>
+>>>>
+>
+>>>> Looks like both vga.vram and qxl.vram are being preserved (with the
+>
+>>>> same
+>
+>>>> addresses), and no incompatible ram blocks are found during migration.
+>
+>>>
+>
+>>> Sorry, addressed are not the same, of course.  However corresponding
+>
+>>> ram
+>
+>>> blocks do seem to be preserved and initialized.
+>
+>>
+>
+>> So far, I have not reproduced the guest driver failure.
+>
+>>
+>
+>> However, I have isolated places where new QEMU improperly writes to
+>
+>> the qxl memory regions prior to starting the guest, by mmap'ing them
+>
+>> readonly after cpr:
+>
+>>
+>
+>>    qemu_ram_alloc_internal()
+>
+>>      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+>
+>>          ram_flags |= RAM_READONLY;
+>
+>>      new_block = qemu_ram_alloc_from_fd(...)
+>
+>>
+>
+>> I have attached a draft fix; try it and let me know.
+>
+>> My console window looks fine before and after cpr, using
+>
+>> -vnc $hostip:0 -vga qxl
+>
+>>
+>
+>> - Steve
+>
+>
+>
+> Regarding the reproduce: when I launch the buggy version with the same
+>
+> options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+>
+> my VNC client silently hangs on the target after a while.  Could it
+>
+> happen on your stand as well?Â
+>
+>
+cpr does not preserve the vnc connection and session.  To test, I specify
+>
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+>
+dormant the dest vnc becomes active.
+>
+Sure, I meant that VNC on the dest (on the port 1) works for a while
+after the migration and then hangs, apparently after the guest QXL crash.
+
+>
+> Could you try launching VM with
+>
+> "-nographic -device qxl-vga"?  That way VM's serial console is given you
+>
+> directly in the shell, so when qxl driver crashes you're still able to
+>
+> inspect the kernel messages.
+>
+>
+I have been running like that, but have not reproduced the qxl driver
+>
+crash,
+>
+and I suspect my guest image+kernel is too old.
+Yes, that's probably the case.  But the crash occurs on my Fedora 41
+guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
+be buggy.
+
+
+>
+However, once I realized the
+>
+issue was post-cpr modification of qxl memory, I switched my attention
+>
+to the
+>
+fix.
+>
+>
+> As for your patch, I can report that it doesn't resolve the issue as it
+>
+> is.  But I was able to track down another possible memory corruption
+>
+> using your approach with readonly mmap'ing:
+>
+>
+>
+>> Program terminated with signal SIGSEGV, Segmentation fault.
+>
+>> #0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+>
+>> 412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+>
+>> [Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+>
+>> (gdb) bt
+>
+>> #0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+>
+>> #1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+>
+>> errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+>
+>> #2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+>
+>> errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+>
+>> #3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+>
+>> errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+>
+>> #4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+>
+>> value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+>
+>> #5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+>
+>> v=0x5638996f3770, name=0x56389759b141 "realized",
+>
+>> opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+>
+>>      at ../qom/object.c:2374
+>
+>> #6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+>
+>> name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+>
+>>      at ../qom/object.c:1449
+>
+>> #7  0x00005638970f8586 in object_property_set_qobject
+>
+>> (obj=0x5638996e0e70, name=0x56389759b141 "realized",
+>
+>> value=0x5638996df900, errp=0x7ffd3c2b84e0)
+>
+>>      at ../qom/qom-qobject.c:28
+>
+>> #8  0x00005638970f3d8d in object_property_set_bool
+>
+>> (obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
+>
+>> errp=0x7ffd3c2b84e0)
+>
+>>      at ../qom/object.c:1519
+>
+>> #9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+>
+>> bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+>
+>> #10 0x0000563896dba675 in qdev_device_add_from_qdict
+>
+>> (opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
+>
+>> system/qdev-monitor.c:714
+>
+>> #11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+>
+>> errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+>
+>> #12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
+>
+>> opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
+>
+>> vl.c:1207
+>
+>> #13 0x000056389737a6cc in qemu_opts_foreach
+>
+>>      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+>
+>> <device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+>
+>>      at ../util/qemu-option.c:1135
+>
+>> #14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
+>
+>> vl.c:2745
+>
+>> #15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+>
+>> <error_fatal>) at ../system/vl.c:2806
+>
+>> #16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
+>
+>> at ../system/vl.c:3838
+>
+>> #17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
+>
+>> system/main.c:72
+>
+>
+>
+> So the attached adjusted version of your patch does seem to help.  At
+>
+> least I can't reproduce the crash on my stand.
+>
+>
+Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
+>
+are
+>
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+>
+of init_qxl_ram that modify guest memory.
+>
+Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
+it to the list as a proper fix?
+
+>
+> I'm wondering, could it be useful to explicitly mark all the reused
+>
+> memory regions readonly upon cpr-transfer, and then make them writable
+>
+> back again after the migration is done?  That way we will be segfaulting
+>
+> early on instead of debugging tricky memory corruptions.
+>
+>
+It's a useful debugging technique, but changing protection on a large
+>
+memory region
+>
+can be too expensive for production due to TLB shootdowns.
+>
+>
+Also, there are cases where writes are performed but the value is
+>
+guaranteed to
+>
+be the same:
+>
+  qxl_post_load()
+>
+    qxl_set_mode()
+>
+      d->rom->mode = cpu_to_le32(modenr);
+>
+The value is the same because mode and shadow_rom.mode were passed in
+>
+vmstate
+>
+from old qemu.
+>
+There're also cases where devices' ROM might be re-initialized.  E.g.
+this segfault occures upon further exploration of RO mapped RAM blocks:
+
+>
+Program terminated with signal SIGSEGV, Segmentation fault.
+>
+#0  __memmove_avx_unaligned_erms () at
+>
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+>
+664             rep     movsb
+>
+[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
+>
+(gdb) bt
+>
+#0  __memmove_avx_unaligned_erms () at
+>
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+>
+#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380,
+>
+owner=0x55aa2019ac10, name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
+>
+at ../hw/core/loader.c:1032
+>
+#2  0x000055aa1d031577 in rom_add_blob
+>
+(name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072,
+>
+max_len=2097152, addr=18446744073709551615, fw_file_name=0x55aa1da51f13
+>
+"etc/acpi/tables", fw_callback=0x55aa1d441f59 <acpi_build_update>,
+>
+callback_opaque=0x55aa20ff0010, as=0x0, read_only=true) at
+>
+../hw/core/loader.c:1147
+>
+#3  0x000055aa1cfd788d in acpi_add_rom_blob
+>
+(update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010,
+>
+blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at
+>
+../hw/acpi/utils.c:46
+>
+#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
+>
+#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0)
+>
+at ../hw/i386/pc.c:638
+>
+#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10
+>
+<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
+>
+#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at
+>
+../hw/core/machine.c:1749
+>
+#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40
+>
+<error_fatal>) at ../system/vl.c:2779
+>
+#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40
+>
+<error_fatal>) at ../system/vl.c:2807
+>
+#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at
+>
+../system/vl.c:3838
+>
+#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at
+>
+../system/main.c:72
+I'm not sure whether ACPI tables ROM in particular is rewritten with the
+same content, but there might be cases where ROM can be read from file
+system upon initialization.  That is undesirable as guest kernel
+certainly won't be too happy about sudden change of the device's ROM
+content.
+
+So the issue we're dealing with here is any unwanted memory related
+device initialization upon cpr.
+
+For now the only thing that comes to my mind is to make a test where we
+put as many devices as we can into a VM, make ram blocks RO upon cpr
+(and remap them as RW later after migration is done, if needed), and
+catch any unwanted memory violations.  As Den suggested, we might
+consider adding that behaviour as a separate non-default option (or
+"migrate" command flag specific to cpr-transfer), which would only be
+used in the testing.
+
+Andrey
+
+On 3/6/25 16:16, Andrey Drobyshev wrote:
+On 3/5/25 11:19 PM, Steven Sistare wrote:
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently
+and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga \
+        -incoming tcp:0:44444 \
+        -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+        migrate-set-parameters mode=cpr-transfer
+        migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-
+min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which
+speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+            echo "$(date) starting round $j"
+            if [ "$(journalctl --boot | grep "failed to allocate
+VRAM
+BO")" != "" ]; then
+                    echo "bug was reproduced after $j tries"
+                    exit 1
+            fi
+            for i in $(seq 100); do
+                    dmesg > /dev/tty3
+            done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce
+that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't
+lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest
+memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into
+this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+   Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers"
+patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 24 host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 27 host 0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 34 host 0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 35 host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 36 host 0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+37 host 0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 18 host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 16 host 0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 14 host 0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 13 host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 11 host 0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+10 host 0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the
+same
+addresses), and no incompatible ram blocks are found during migration.
+Sorry, addressed are not the same, of course.  However corresponding
+ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+    qemu_ram_alloc_internal()
+      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+          ram_flags |= RAM_READONLY;
+      new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?
+cpr does not preserve the vnc connection and session.  To test, I specify
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+dormant the dest vnc becomes active.
+Sure, I meant that VNC on the dest (on the port 1) works for a while
+after the migration and then hangs, apparently after the guest QXL crash.
+Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+I have been running like that, but have not reproduced the qxl driver
+crash,
+and I suspect my guest image+kernel is too old.
+Yes, that's probably the case.  But the crash occurs on my Fedora 41
+guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
+be buggy.
+However, once I realized the
+issue was post-cpr modification of qxl memory, I switched my attention
+to the
+fix.
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+(gdb) bt
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+v=0x5638996f3770, name=0x56389759b141 "realized",
+opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:2374
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1449
+#7  0x00005638970f8586 in object_property_set_qobject
+(obj=0x5638996e0e70, name=0x56389759b141 "realized",
+value=0x5638996df900, errp=0x7ffd3c2b84e0)
+      at ../qom/qom-qobject.c:28
+#8  0x00005638970f3d8d in object_property_set_bool
+(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
+errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1519
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+#10 0x0000563896dba675 in qdev_device_add_from_qdict
+(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
+system/qdev-monitor.c:714
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
+opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
+vl.c:1207
+#13 0x000056389737a6cc in qemu_opts_foreach
+      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+      at ../util/qemu-option.c:1135
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
+vl.c:2745
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+<error_fatal>) at ../system/vl.c:2806
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
+at ../system/vl.c:3838
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
+system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
+are
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+of init_qxl_ram that modify guest memory.
+Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
+it to the list as a proper fix?
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+It's a useful debugging technique, but changing protection on a large
+memory region
+can be too expensive for production due to TLB shootdowns.
+
+Also, there are cases where writes are performed but the value is
+guaranteed to
+be the same:
+   qxl_post_load()
+     qxl_set_mode()
+       d->rom->mode = cpu_to_le32(modenr);
+The value is the same because mode and shadow_rom.mode were passed in
+vmstate
+from old qemu.
+There're also cases where devices' ROM might be re-initialized.  E.g.
+this segfault occures upon further exploration of RO mapped RAM blocks:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+664             rep     movsb
+[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
+(gdb) bt
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
+name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
+     at ../hw/core/loader.c:1032
+#2  0x000055aa1d031577 in rom_add_blob
+     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
+addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
+fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
+read_only=true) at ../hw/core/loader.c:1147
+#3  0x000055aa1cfd788d in acpi_add_rom_blob
+     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
+blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
+#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
+#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
+at ../hw/i386/pc.c:638
+#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
+<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
+#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
+../hw/core/machine.c:1749
+#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2779
+#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2807
+#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
+../system/vl.c:3838
+#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
+../system/main.c:72
+I'm not sure whether ACPI tables ROM in particular is rewritten with the
+same content, but there might be cases where ROM can be read from file
+system upon initialization.  That is undesirable as guest kernel
+certainly won't be too happy about sudden change of the device's ROM
+content.
+
+So the issue we're dealing with here is any unwanted memory related
+device initialization upon cpr.
+
+For now the only thing that comes to my mind is to make a test where we
+put as many devices as we can into a VM, make ram blocks RO upon cpr
+(and remap them as RW later after migration is done, if needed), and
+catch any unwanted memory violations.  As Den suggested, we might
+consider adding that behaviour as a separate non-default option (or
+"migrate" command flag specific to cpr-transfer), which would only be
+used in the testing.
+
+Andrey
+No way. ACPI with the source must be used in the same way as BIOSes
+and optional ROMs.
+
+Den
+
+On 3/6/2025 10:52 AM, Denis V. Lunev wrote:
+On 3/6/25 16:16, Andrey Drobyshev wrote:
+On 3/5/25 11:19 PM, Steven Sistare wrote:
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently
+and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga \
+        -incoming tcp:0:44444 \
+        -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+        migrate-set-parameters mode=cpr-transfer
+        migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-
+min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which
+speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+            echo "$(date) starting round $j"
+            if [ "$(journalctl --boot | grep "failed to allocate
+VRAM
+BO")" != "" ]; then
+                    echo "bug was reproduced after $j tries"
+                    exit 1
+            fi
+            for i in $(seq 100); do
+                    dmesg > /dev/tty3
+            done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce
+that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't
+lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest
+memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into
+this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+   Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers"
+patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 24 host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 27 host 0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 34 host 0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 35 host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 36 host 0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+37 host 0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 18 host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 16 host 0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 14 host 0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 13 host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 11 host 0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+10 host 0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the
+same
+addresses), and no incompatible ram blocks are found during migration.
+Sorry, addressed are not the same, of course.  However corresponding
+ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+    qemu_ram_alloc_internal()
+      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+          ram_flags |= RAM_READONLY;
+      new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?
+cpr does not preserve the vnc connection and session.  To test, I specify
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+dormant the dest vnc becomes active.
+Sure, I meant that VNC on the dest (on the port 1) works for a while
+after the migration and then hangs, apparently after the guest QXL crash.
+Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+I have been running like that, but have not reproduced the qxl driver
+crash,
+and I suspect my guest image+kernel is too old.
+Yes, that's probably the case.  But the crash occurs on my Fedora 41
+guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
+be buggy.
+However, once I realized the
+issue was post-cpr modification of qxl memory, I switched my attention
+to the
+fix.
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+(gdb) bt
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+v=0x5638996f3770, name=0x56389759b141 "realized",
+opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:2374
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1449
+#7  0x00005638970f8586 in object_property_set_qobject
+(obj=0x5638996e0e70, name=0x56389759b141 "realized",
+value=0x5638996df900, errp=0x7ffd3c2b84e0)
+      at ../qom/qom-qobject.c:28
+#8  0x00005638970f3d8d in object_property_set_bool
+(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
+errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1519
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+#10 0x0000563896dba675 in qdev_device_add_from_qdict
+(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
+system/qdev-monitor.c:714
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
+opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
+vl.c:1207
+#13 0x000056389737a6cc in qemu_opts_foreach
+      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+      at ../util/qemu-option.c:1135
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
+vl.c:2745
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+<error_fatal>) at ../system/vl.c:2806
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
+at ../system/vl.c:3838
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
+system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
+are
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+of init_qxl_ram that modify guest memory.
+Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
+it to the list as a proper fix?
+Yes.  Was waiting for your confirmation.
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+It's a useful debugging technique, but changing protection on a large
+memory region
+can be too expensive for production due to TLB shootdowns.
+
+Also, there are cases where writes are performed but the value is
+guaranteed to
+be the same:
+   qxl_post_load()
+     qxl_set_mode()
+       d->rom->mode = cpu_to_le32(modenr);
+The value is the same because mode and shadow_rom.mode were passed in
+vmstate
+from old qemu.
+There're also cases where devices' ROM might be re-initialized.  E.g.
+this segfault occures upon further exploration of RO mapped RAM blocks:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+664             rep     movsb
+[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
+(gdb) bt
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
+name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
+     at ../hw/core/loader.c:1032
+#2  0x000055aa1d031577 in rom_add_blob
+     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
+addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
+fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
+read_only=true) at ../hw/core/loader.c:1147
+#3  0x000055aa1cfd788d in acpi_add_rom_blob
+     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
+blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
+#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
+#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
+at ../hw/i386/pc.c:638
+#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
+<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
+#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
+../hw/core/machine.c:1749
+#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2779
+#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2807
+#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
+../system/vl.c:3838
+#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
+../system/main.c:72
+I'm not sure whether ACPI tables ROM in particular is rewritten with the
+same content, but there might be cases where ROM can be read from file
+system upon initialization.  That is undesirable as guest kernel
+certainly won't be too happy about sudden change of the device's ROM
+content.
+
+So the issue we're dealing with here is any unwanted memory related
+device initialization upon cpr.
+
+For now the only thing that comes to my mind is to make a test where we
+put as many devices as we can into a VM, make ram blocks RO upon cpr
+(and remap them as RW later after migration is done, if needed), and
+catch any unwanted memory violations.  As Den suggested, we might
+consider adding that behaviour as a separate non-default option (or
+"migrate" command flag specific to cpr-transfer), which would only be
+used in the testing.
+I'll look into adding an option, but there may be too many false positives,
+such as the qxl_set_mode case above.  And the maintainers may object to me
+eliminating the false positives by adding more CPR_IN tests, due to gratuitous
+(from their POV) ugliness.
+
+But I will use the technique to look for more write violations.
+Andrey
+No way. ACPI with the source must be used in the same way as BIOSes
+and optional ROMs.
+Yup, its a bug.  Will fix.
+
+- Steve
+
+see
+1741380954-341079-1-git-send-email-steven.sistare@oracle.com
+/">https://lore.kernel.org/qemu-devel/
+1741380954-341079-1-git-send-email-steven.sistare@oracle.com
+/
+- Steve
+
+On 3/6/2025 11:13 AM, Steven Sistare wrote:
+On 3/6/2025 10:52 AM, Denis V. Lunev wrote:
+On 3/6/25 16:16, Andrey Drobyshev wrote:
+On 3/5/25 11:19 PM, Steven Sistare wrote:
+On 3/5/2025 11:50 AM, Andrey Drobyshev wrote:
+On 3/4/25 9:05 PM, Steven Sistare wrote:
+On 2/28/2025 1:37 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:35 PM, Andrey Drobyshev wrote:
+On 2/28/25 8:20 PM, Steven Sistare wrote:
+On 2/28/2025 1:13 PM, Steven Sistare wrote:
+On 2/28/2025 12:39 PM, Andrey Drobyshev wrote:
+Hi all,
+
+We've been experimenting with cpr-transfer migration mode recently
+and
+have discovered the following issue with the guest QXL driver:
+
+Run migration source:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga
+Run migration target:
+EMULATOR=/path/to/emulator
+ROOTFS=/path/to/image
+QMPSOCK=/var/run/alma8qmp-dst.sock
+$EMULATOR -enable-kvm \
+        -machine q35 \
+        -cpu host -smp 2 -m 2G \
+        -object memory-backend-file,id=ram0,size=2G,mem-path=/
+dev/shm/
+ram0,share=on\
+        -machine memory-backend=ram0 \
+        -machine aux-ram-share=on \
+        -drive file=$ROOTFS,media=disk,if=virtio \
+        -qmp unix:$QMPSOCK,server=on,wait=off \
+        -nographic \
+        -device qxl-vga \
+        -incoming tcp:0:44444 \
+        -incoming '{"channel-type": "cpr", "addr": { "transport":
+"socket", "type": "unix", "path": "/var/run/alma8cpr-dst.sock"}}'
+Launch the migration:
+QMPSHELL=/root/src/qemu/master/scripts/qmp/qmp-shell
+QMPSOCK=/var/run/alma8qmp-src.sock
+
+$QMPSHELL -p $QMPSOCK <<EOF
+        migrate-set-parameters mode=cpr-transfer
+        migrate channels=[{"channel-type":"main","addr":
+{"transport":"socket","type":"inet","host":"0","port":"44444"}},
+{"channel-type":"cpr","addr":
+{"transport":"socket","type":"unix","path":"/var/run/alma8cpr-
+dst.sock"}}]
+EOF
+Then, after a while, QXL guest driver on target crashes spewing the
+following messages:
+[   73.962002] [TTM] Buffer eviction failed
+[   73.962072] qxl 0000:00:02.0: object_init failed for (3149824,
+0x00000001)
+[   73.962081] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to
+allocate VRAM BO
+That seems to be a known kernel QXL driver bug:
+https://lore.kernel.org/all/20220907094423.93581-1-
+min_halo@163.com/T/
+https://lore.kernel.org/lkml/ZTgydqRlK6WX_b29@eldamar.lan/
+(the latter discussion contains that reproduce script which
+speeds up
+the crash in the guest):
+#!/bin/bash
+
+chvt 3
+
+for j in $(seq 80); do
+            echo "$(date) starting round $j"
+            if [ "$(journalctl --boot | grep "failed to allocate
+VRAM
+BO")" != "" ]; then
+                    echo "bug was reproduced after $j tries"
+                    exit 1
+            fi
+            for i in $(seq 100); do
+                    dmesg > /dev/tty3
+            done
+done
+
+echo "bug could not be reproduced"
+exit 0
+The bug itself seems to remain unfixed, as I was able to reproduce
+that
+with Fedora 41 guest, as well as AlmaLinux 8 guest. However our
+cpr-transfer code also seems to be buggy as it triggers the crash -
+without the cpr-transfer migration the above reproduce doesn't
+lead to
+crash on the source VM.
+
+I suspect that, as cpr-transfer doesn't migrate the guest
+memory, but
+rather passes it through the memory backend object, our code might
+somehow corrupt the VRAM.  However, I wasn't able to trace the
+corruption so far.
+
+Could somebody help the investigation and take a look into
+this?  Any
+suggestions would be appreciated.  Thanks!
+Possibly some memory region created by qxl is not being preserved.
+Try adding these traces to see what is preserved:
+
+-trace enable='*cpr*'
+-trace enable='*ram_alloc*'
+Also try adding this patch to see if it flags any ram blocks as not
+compatible with cpr.  A message is printed at migration start time.
+   Â
+https://lore.kernel.org/qemu-devel/1740667681-257312-1-git-send-
+email-
+steven.sistare@oracle.com/
+
+- Steve
+With the traces enabled + the "migration: ram block cpr blockers"
+patch
+applied:
+
+Source:
+cpr_find_fd pc.bios, id 0 returns -1
+cpr_save_fd pc.bios, id 0, fd 22
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 22 host
+0x7fec18e00000
+cpr_find_fd pc.rom, id 0 returns -1
+cpr_save_fd pc.rom, id 0, fd 23
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 23 host
+0x7fec18c00000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns -1
+cpr_save_fd 0000:00:01.0/e1000e.rom, id 0, fd 24
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 24 host 0x7fec18a00000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 25
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 25 host 0x7feb77e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vrom, id 0, fd 27
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 27 host 0x7fec18800000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.vram, id 0, fd 28
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 28 host 0x7feb73c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns -1
+cpr_save_fd 0000:00:02.0/qxl.rom, id 0, fd 34
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 34 host 0x7fec18600000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/tables, id 0, fd 35
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 35 host 0x7fec18200000
+cpr_find_fd /rom@etc/table-loader, id 0 returns -1
+cpr_save_fd /rom@etc/table-loader, id 0, fd 36
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 36 host 0x7feb8b600000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
+cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 37
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+37 host 0x7feb8b400000
+
+cpr_state_save cpr-transfer mode
+cpr_transfer_output /var/run/alma8cpr-dst.sock
+Target:
+cpr_transfer_input /var/run/alma8cpr-dst.sock
+cpr_state_load cpr-transfer mode
+cpr_find_fd pc.bios, id 0 returns 20
+qemu_ram_alloc_shared pc.bios size 262144 max_size 262144 fd 20 host
+0x7fcdc9800000
+cpr_find_fd pc.rom, id 0 returns 19
+qemu_ram_alloc_shared pc.rom size 131072 max_size 131072 fd 19 host
+0x7fcdc9600000
+cpr_find_fd 0000:00:01.0/e1000e.rom, id 0 returns 18
+qemu_ram_alloc_shared 0000:00:01.0/e1000e.rom size 262144 max_size
+262144 fd 18 host 0x7fcdc9400000
+cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 17
+qemu_ram_alloc_shared 0000:00:02.0/vga.vram size 67108864 max_size
+67108864 fd 17 host 0x7fcd27e00000
+cpr_find_fd 0000:00:02.0/qxl.vrom, id 0 returns 16
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vrom size 8192 max_size 8192
+fd 16 host 0x7fcdc9200000
+cpr_find_fd 0000:00:02.0/qxl.vram, id 0 returns 15
+qemu_ram_alloc_shared 0000:00:02.0/qxl.vram size 67108864 max_size
+67108864 fd 15 host 0x7fcd23c00000
+cpr_find_fd 0000:00:02.0/qxl.rom, id 0 returns 14
+qemu_ram_alloc_shared 0000:00:02.0/qxl.rom size 65536 max_size 65536
+fd 14 host 0x7fcdc8800000
+cpr_find_fd /rom@etc/acpi/tables, id 0 returns 13
+qemu_ram_alloc_shared /rom@etc/acpi/tables size 131072 max_size
+2097152 fd 13 host 0x7fcdc8400000
+cpr_find_fd /rom@etc/table-loader, id 0 returns 11
+qemu_ram_alloc_shared /rom@etc/table-loader size 4096 max_size 65536
+fd 11 host 0x7fcdc8200000
+cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 10
+qemu_ram_alloc_shared /rom@etc/acpi/rsdp size 4096 max_size 4096 fd
+10 host 0x7fcd3be00000
+Looks like both vga.vram and qxl.vram are being preserved (with the
+same
+addresses), and no incompatible ram blocks are found during migration.
+Sorry, addressed are not the same, of course.  However corresponding
+ram
+blocks do seem to be preserved and initialized.
+So far, I have not reproduced the guest driver failure.
+
+However, I have isolated places where new QEMU improperly writes to
+the qxl memory regions prior to starting the guest, by mmap'ing them
+readonly after cpr:
+
+    qemu_ram_alloc_internal()
+      if (reused && (strstr(name, "qxl") || strstr("name", "vga")))
+          ram_flags |= RAM_READONLY;
+      new_block = qemu_ram_alloc_from_fd(...)
+
+I have attached a draft fix; try it and let me know.
+My console window looks fine before and after cpr, using
+-vnc $hostip:0 -vga qxl
+
+- Steve
+Regarding the reproduce: when I launch the buggy version with the same
+options as you, i.e. "-vnc 0.0.0.0:$port -vga qxl", and do cpr-transfer,
+my VNC client silently hangs on the target after a while.  Could it
+happen on your stand as well?
+cpr does not preserve the vnc connection and session.  To test, I specify
+port 0 for the source VM and port 1 for the dest.  When the src vnc goes
+dormant the dest vnc becomes active.
+Sure, I meant that VNC on the dest (on the port 1) works for a while
+after the migration and then hangs, apparently after the guest QXL crash.
+Could you try launching VM with
+"-nographic -device qxl-vga"?  That way VM's serial console is given you
+directly in the shell, so when qxl driver crashes you're still able to
+inspect the kernel messages.
+I have been running like that, but have not reproduced the qxl driver
+crash,
+and I suspect my guest image+kernel is too old.
+Yes, that's probably the case.  But the crash occurs on my Fedora 41
+guest with the 6.11.5-300.fc41.x86_64 kernel, so newer kernels seem to
+be buggy.
+However, once I realized the
+issue was post-cpr modification of qxl memory, I switched my attention
+to the
+fix.
+As for your patch, I can report that it doesn't resolve the issue as it
+is.  But I was able to track down another possible memory corruption
+using your approach with readonly mmap'ing:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+412         d->ram->magic       = cpu_to_le32(QXL_RAM_MAGIC);
+[Current thread is 1 (Thread 0x7f1a4f83b480 (LWP 229798))]
+(gdb) bt
+#0  init_qxl_ram (d=0x5638996e0e70) at ../hw/display/qxl.c:412
+#1  0x0000563896e7f467 in qxl_realize_common (qxl=0x5638996e0e70,
+errp=0x7ffd3c2b8170) at ../hw/display/qxl.c:2142
+#2  0x0000563896e7fda1 in qxl_realize_primary (dev=0x5638996e0e70,
+errp=0x7ffd3c2b81d0) at ../hw/display/qxl.c:2257
+#3  0x0000563896c7e8f2 in pci_qdev_realize (qdev=0x5638996e0e70,
+errp=0x7ffd3c2b8250) at ../hw/pci/pci.c:2174
+#4  0x00005638970eb54b in device_set_realized (obj=0x5638996e0e70,
+value=true, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:494
+#5  0x00005638970f5e14 in property_set_bool (obj=0x5638996e0e70,
+v=0x5638996f3770, name=0x56389759b141 "realized",
+opaque=0x5638987893d0, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:2374
+#6  0x00005638970f39f8 in object_property_set (obj=0x5638996e0e70,
+name=0x56389759b141 "realized", v=0x5638996f3770, errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1449
+#7  0x00005638970f8586 in object_property_set_qobject
+(obj=0x5638996e0e70, name=0x56389759b141 "realized",
+value=0x5638996df900, errp=0x7ffd3c2b84e0)
+      at ../qom/qom-qobject.c:28
+#8  0x00005638970f3d8d in object_property_set_bool
+(obj=0x5638996e0e70, name=0x56389759b141 "realized", value=true,
+errp=0x7ffd3c2b84e0)
+      at ../qom/object.c:1519
+#9  0x00005638970eacb0 in qdev_realize (dev=0x5638996e0e70,
+bus=0x563898cf3c20, errp=0x7ffd3c2b84e0) at ../hw/core/qdev.c:276
+#10 0x0000563896dba675 in qdev_device_add_from_qdict
+(opts=0x5638996dfe50, from_json=false, errp=0x7ffd3c2b84e0) at ../
+system/qdev-monitor.c:714
+#11 0x0000563896dba721 in qdev_device_add (opts=0x563898786150,
+errp=0x56389855dc40 <error_fatal>) at ../system/qdev-monitor.c:733
+#12 0x0000563896dc48f1 in device_init_func (opaque=0x0,
+opts=0x563898786150, errp=0x56389855dc40 <error_fatal>) at ../system/
+vl.c:1207
+#13 0x000056389737a6cc in qemu_opts_foreach
+      (list=0x563898427b60 <qemu_device_opts>, func=0x563896dc48ca
+<device_init_func>, opaque=0x0, errp=0x56389855dc40 <error_fatal>)
+      at ../util/qemu-option.c:1135
+#14 0x0000563896dc89b5 in qemu_create_cli_devices () at ../system/
+vl.c:2745
+#15 0x0000563896dc8c00 in qmp_x_exit_preconfig (errp=0x56389855dc40
+<error_fatal>) at ../system/vl.c:2806
+#16 0x0000563896dcb5de in qemu_init (argc=33, argv=0x7ffd3c2b8948)
+at ../system/vl.c:3838
+#17 0x0000563897297323 in main (argc=33, argv=0x7ffd3c2b8948) at ../
+system/main.c:72
+So the attached adjusted version of your patch does seem to help.  At
+least I can't reproduce the crash on my stand.
+Thanks for the stack trace; the calls to SPICE_RING_INIT in init_qxl_ram
+are
+definitely harmful.  Try V2 of the patch, attached, which skips the lines
+of init_qxl_ram that modify guest memory.
+Thanks, your v2 patch does seem to prevent the crash.  Would you re-send
+it to the list as a proper fix?
+Yes.  Was waiting for your confirmation.
+I'm wondering, could it be useful to explicitly mark all the reused
+memory regions readonly upon cpr-transfer, and then make them writable
+back again after the migration is done?  That way we will be segfaulting
+early on instead of debugging tricky memory corruptions.
+It's a useful debugging technique, but changing protection on a large
+memory region
+can be too expensive for production due to TLB shootdowns.
+
+Also, there are cases where writes are performed but the value is
+guaranteed to
+be the same:
+   qxl_post_load()
+     qxl_set_mode()
+       d->rom->mode = cpu_to_le32(modenr);
+The value is the same because mode and shadow_rom.mode were passed in
+vmstate
+from old qemu.
+There're also cases where devices' ROM might be re-initialized.  E.g.
+this segfault occures upon further exploration of RO mapped RAM blocks:
+Program terminated with signal SIGSEGV, Segmentation fault.
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+664             rep     movsb
+[Current thread is 1 (Thread 0x7f6e7d08b480 (LWP 310379))]
+(gdb) bt
+#0  __memmove_avx_unaligned_erms () at 
+../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:664
+#1  0x000055aa1d030ecd in rom_set_mr (rom=0x55aa200ba380, owner=0x55aa2019ac10, 
+name=0x7fffb8272bc0 "/rom@etc/acpi/tables", ro=true)
+     at ../hw/core/loader.c:1032
+#2  0x000055aa1d031577 in rom_add_blob
+     (name=0x55aa1da51f13 "etc/acpi/tables", blob=0x55aa208a1070, len=131072, max_len=2097152, 
+addr=18446744073709551615, fw_file_name=0x55aa1da51f13 "etc/acpi/tables", 
+fw_callback=0x55aa1d441f59 <acpi_build_update>, callback_opaque=0x55aa20ff0010, as=0x0, 
+read_only=true) at ../hw/core/loader.c:1147
+#3  0x000055aa1cfd788d in acpi_add_rom_blob
+     (update=0x55aa1d441f59 <acpi_build_update>, opaque=0x55aa20ff0010, 
+blob=0x55aa1fc9aa00, name=0x55aa1da51f13 "etc/acpi/tables") at ../hw/acpi/utils.c:46
+#4  0x000055aa1d44213f in acpi_setup () at ../hw/i386/acpi-build.c:2720
+#5  0x000055aa1d434199 in pc_machine_done (notifier=0x55aa1ff15050, data=0x0) 
+at ../hw/i386/pc.c:638
+#6  0x000055aa1d876845 in notifier_list_notify (list=0x55aa1ea25c10 
+<machine_init_done_notifiers>, data=0x0) at ../util/notify.c:39
+#7  0x000055aa1d039ee5 in qdev_machine_creation_done () at 
+../hw/core/machine.c:1749
+#8  0x000055aa1d2c7b3e in qemu_machine_creation_done (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2779
+#9  0x000055aa1d2c7c7d in qmp_x_exit_preconfig (errp=0x55aa1ea5cc40 
+<error_fatal>) at ../system/vl.c:2807
+#10 0x000055aa1d2ca64f in qemu_init (argc=35, argv=0x7fffb82730e8) at 
+../system/vl.c:3838
+#11 0x000055aa1d79638c in main (argc=35, argv=0x7fffb82730e8) at 
+../system/main.c:72
+I'm not sure whether ACPI tables ROM in particular is rewritten with the
+same content, but there might be cases where ROM can be read from file
+system upon initialization.  That is undesirable as guest kernel
+certainly won't be too happy about sudden change of the device's ROM
+content.
+
+So the issue we're dealing with here is any unwanted memory related
+device initialization upon cpr.
+
+For now the only thing that comes to my mind is to make a test where we
+put as many devices as we can into a VM, make ram blocks RO upon cpr
+(and remap them as RW later after migration is done, if needed), and
+catch any unwanted memory violations.  As Den suggested, we might
+consider adding that behaviour as a separate non-default option (or
+"migrate" command flag specific to cpr-transfer), which would only be
+used in the testing.
+I'll look into adding an option, but there may be too many false positives,
+such as the qxl_set_mode case above.  And the maintainers may object to me
+eliminating the false positives by adding more CPR_IN tests, due to gratuitous
+(from their POV) ugliness.
+
+But I will use the technique to look for more write violations.
+Andrey
+No way. ACPI with the source must be used in the same way as BIOSes
+and optional ROMs.
+Yup, its a bug.  Will fix.
+
+- Steve
+
diff --git a/results/classifier/zero-shot/010/review/42226390 b/results/classifier/zero-shot/010/review/42226390
new file mode 100644
index 00000000..409eb9bf
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/42226390
@@ -0,0 +1,211 @@
+device: 0.951
+boot: 0.943
+debug: 0.942
+graphic: 0.942
+permissions: 0.936
+performance: 0.927
+semantic: 0.924
+PID: 0.914
+KVM: 0.905
+network: 0.894
+other: 0.894
+socket: 0.882
+files: 0.878
+vnc: 0.853
+debug: 0.971
+boot: 0.967
+PID: 0.068
+device: 0.061
+files: 0.035
+socket: 0.034
+vnc: 0.024
+semantic: 0.020
+performance: 0.020
+other: 0.020
+KVM: 0.012
+network: 0.006
+graphic: 0.002
+permissions: 0.002
+
+[BUG] AArch64 boot hang with -icount and -smp >1 (iothread locking issue?)
+
+Hello,
+
+I am encountering one or more bugs when using -icount and -smp >1 that I am
+attempting to sort out. My current theory is that it is an iothread locking
+issue.
+
+I am using a command-line like the following where $kernel is a recent upstream
+AArch64 Linux kernel Image (I can provide a binary if that would be helpful -
+let me know how is best to post):
+
+        qemu-system-aarch64 \
+                -M virt -cpu cortex-a57 -m 1G \
+                -nographic \
+                -smp 2 \
+                -icount 0 \
+                -kernel $kernel
+
+For any/all of the symptoms described below, they seem to disappear when I
+either remove `-icount 0` or change smp to `-smp 1`. In other words, it is the
+combination of `-smp >1` and `-icount` which triggers what I'm seeing.
+
+I am seeing two different (but seemingly related) behaviors. The first (and
+what I originally started debugging) shows up as a boot hang. When booting
+using the above command after Peter's "icount: Take iothread lock when running
+QEMU timers" patch [1], The kernel boots for a while and then hangs after:
+
+>
+...snip...
+>
+[    0.010764] Serial: AMBA PL011 UART driver
+>
+[    0.016334] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud
+>
+= 0) is a PL011 rev1
+>
+[    0.016907] printk: console [ttyAMA0] enabled
+>
+[    0.017624] KASLR enabled
+>
+[    0.031986] HugeTLB: registered 16.0 GiB page size, pre-allocated 0 pages
+>
+[    0.031986] HugeTLB: 16320 KiB vmemmap can be freed for a 16.0 GiB page
+>
+[    0.031986] HugeTLB: registered 512 MiB page size, pre-allocated 0 pages
+>
+[    0.031986] HugeTLB: 448 KiB vmemmap can be freed for a 512 MiB page
+>
+[    0.031986] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
+>
+[    0.031986] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
+When it hangs here, I drop into QEMU's console, attach to the gdbserver, and it
+always reports that it is at address 0xffff800008dc42e8 (as shown below from an
+objdump of the vmlinux). I note this is in the middle of messing with timer
+system registers - which makes me suspect we're attempting to take the iothread
+lock when its already held:
+
+>
+ffff800008dc42b8 <arch_timer_set_next_event_virt>:
+>
+ffff800008dc42b8:       d503201f        nop
+>
+ffff800008dc42bc:       d503201f        nop
+>
+ffff800008dc42c0:       d503233f        paciasp
+>
+ffff800008dc42c4:       d53be321        mrs     x1, cntv_ctl_el0
+>
+ffff800008dc42c8:       32000021        orr     w1, w1, #0x1
+>
+ffff800008dc42cc:       d5033fdf        isb
+>
+ffff800008dc42d0:       d53be042        mrs     x2, cntvct_el0
+>
+ffff800008dc42d4:       ca020043        eor     x3, x2, x2
+>
+ffff800008dc42d8:       8b2363e3        add     x3, sp, x3
+>
+ffff800008dc42dc:       f940007f        ldr     xzr, [x3]
+>
+ffff800008dc42e0:       8b020000        add     x0, x0, x2
+>
+ffff800008dc42e4:       d51be340        msr     cntv_cval_el0, x0
+>
+* ffff800008dc42e8:       927ef820        and     x0, x1, #0xfffffffffffffffd
+>
+ffff800008dc42ec:       d51be320        msr     cntv_ctl_el0, x0
+>
+ffff800008dc42f0:       d5033fdf        isb
+>
+ffff800008dc42f4:       52800000        mov     w0, #0x0
+>
+// #0
+>
+ffff800008dc42f8:       d50323bf        autiasp
+>
+ffff800008dc42fc:       d65f03c0        ret
+The second behavior is that prior to Peter's "icount: Take iothread lock when
+running QEMU timers" patch [1], I observe the following message (same command
+as above):
+
+>
+ERROR:../accel/tcg/tcg-accel-ops.c:79:tcg_handle_interrupt: assertion failed:
+>
+(qemu_mutex_iothread_locked())
+>
+Aborted (core dumped)
+This is the same behavior described in Gitlab issue 1130 [0] and addressed by
+[1]. I bisected the appearance of this assertion, and found it was introduced
+by Pavel's "replay: rewrite async event handling" commit [2]. Commits prior to
+that one boot successfully (neither assertions nor hangs) with `-icount 0 -smp
+2`.
+
+I've looked over these two commits ([1], [2]), but it is not obvious to me
+how/why they might be interacting to produce the boot hangs I'm seeing and
+I welcome any help investigating further.
+
+Thanks!
+
+-Aaron Lindsay
+
+[0] -
+https://gitlab.com/qemu-project/qemu/-/issues/1130
+[1] -
+https://gitlab.com/qemu-project/qemu/-/commit/c7f26ded6d5065e4116f630f6a490b55f6c5f58e
+[2] -
+https://gitlab.com/qemu-project/qemu/-/commit/60618e2d77691e44bb78e23b2b0cf07b5c405e56
+
+On Fri, 21 Oct 2022 at 16:48, Aaron Lindsay
+<aaron@os.amperecomputing.com> wrote:
+>
+>
+Hello,
+>
+>
+I am encountering one or more bugs when using -icount and -smp >1 that I am
+>
+attempting to sort out. My current theory is that it is an iothread locking
+>
+issue.
+Weird coincidence, that is a bug that's been in the tree for months
+but was only reported to me earlier this week. Try reverting
+commit a82fd5a4ec24d923ff1e -- that should fix it.
+CAFEAcA_i8x00hD-4XX18ySLNbCB6ds1-DSazVb4yDnF8skjd9A@mail.gmail.com
+/">https://lore.kernel.org/qemu-devel/
+CAFEAcA_i8x00hD-4XX18ySLNbCB6ds1-DSazVb4yDnF8skjd9A@mail.gmail.com
+/
+has the explanation.
+
+thanks
+-- PMM
+
+On Oct 21 17:00, Peter Maydell wrote:
+>
+On Fri, 21 Oct 2022 at 16:48, Aaron Lindsay
+>
+<aaron@os.amperecomputing.com> wrote:
+>
+>
+>
+> Hello,
+>
+>
+>
+> I am encountering one or more bugs when using -icount and -smp >1 that I am
+>
+> attempting to sort out. My current theory is that it is an iothread locking
+>
+> issue.
+>
+>
+Weird coincidence, that is a bug that's been in the tree for months
+>
+but was only reported to me earlier this week. Try reverting
+>
+commit a82fd5a4ec24d923ff1e -- that should fix it.
+I can confirm that reverting a82fd5a4ec24d923ff1e fixes it for me.
+Thanks for the help and fast response!
+
+-Aaron
+
diff --git a/results/classifier/zero-shot/010/review/42974450 b/results/classifier/zero-shot/010/review/42974450
new file mode 100644
index 00000000..771eedc0
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/42974450
@@ -0,0 +1,453 @@
+other: 0.940
+debug: 0.924
+device: 0.921
+permissions: 0.918
+semantic: 0.917
+performance: 0.914
+PID: 0.913
+boot: 0.909
+network: 0.907
+graphic: 0.906
+KVM: 0.901
+socket: 0.899
+files: 0.877
+vnc: 0.869
+debug: 0.442
+files: 0.192
+device: 0.116
+KVM: 0.071
+PID: 0.052
+boot: 0.047
+other: 0.037
+socket: 0.033
+network: 0.028
+semantic: 0.017
+vnc: 0.014
+performance: 0.005
+permissions: 0.004
+graphic: 0.002
+
+[Bug Report] Possible Missing Endianness Conversion
+
+The virtio packed virtqueue support patch[1] suggests converting
+endianness by lines:
+
+virtio_tswap16s(vdev, &e->off_wrap);
+virtio_tswap16s(vdev, &e->flags);
+
+Though both of these conversion statements aren't present in the
+latest qemu code here[2]
+
+Is this intentional?
+
+[1]:
+https://mail.gnu.org/archive/html/qemu-block/2019-10/msg01492.html
+[2]:
+https://elixir.bootlin.com/qemu/latest/source/hw/virtio/virtio.c#L314
+
+CCing Jason.
+
+On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
+>
+>
+The virtio packed virtqueue support patch[1] suggests converting
+>
+endianness by lines:
+>
+>
+virtio_tswap16s(vdev, &e->off_wrap);
+>
+virtio_tswap16s(vdev, &e->flags);
+>
+>
+Though both of these conversion statements aren't present in the
+>
+latest qemu code here[2]
+>
+>
+Is this intentional?
+Good catch!
+
+It looks like it was removed (maybe by mistake) by commit
+d152cdd6f6 ("virtio: use virtio accessor to access packed event")
+
+Jason can you confirm that?
+
+Thanks,
+Stefano
+
+>
+>
+[1]:
+https://mail.gnu.org/archive/html/qemu-block/2019-10/msg01492.html
+>
+[2]:
+https://elixir.bootlin.com/qemu/latest/source/hw/virtio/virtio.c#L314
+>
+
+On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
+>
+>
+CCing Jason.
+>
+>
+On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
+>
+>
+>
+> The virtio packed virtqueue support patch[1] suggests converting
+>
+> endianness by lines:
+>
+>
+>
+> virtio_tswap16s(vdev, &e->off_wrap);
+>
+> virtio_tswap16s(vdev, &e->flags);
+>
+>
+>
+> Though both of these conversion statements aren't present in the
+>
+> latest qemu code here[2]
+>
+>
+>
+> Is this intentional?
+>
+>
+Good catch!
+>
+>
+It looks like it was removed (maybe by mistake) by commit
+>
+d152cdd6f6 ("virtio: use virtio accessor to access packed event")
+That commit changes from:
+
+-    address_space_read_cached(cache, off_off, &e->off_wrap,
+-                              sizeof(e->off_wrap));
+-    virtio_tswap16s(vdev, &e->off_wrap);
+
+which does a byte read of 2 bytes and then swaps the bytes
+depending on the host endianness and the value of
+virtio_access_is_big_endian()
+
+to this:
+
++    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+
+virtio_lduw_phys_cached() is a small function which calls
+either lduw_be_phys_cached() or lduw_le_phys_cached()
+depending on the value of virtio_access_is_big_endian().
+(And lduw_be_phys_cached() and lduw_le_phys_cached() do
+the right thing for the host-endianness to do a "load
+a specifically big or little endian 16-bit value".)
+
+Which is to say that because we use a load/store function that's
+explicit about the size of the data type it is accessing, the
+function itself can handle doing the load as big or little
+endian, rather than the calling code having to do a manual swap after
+it has done a load-as-bag-of-bytes. This is generally preferable
+as it's less error-prone.
+
+(Explicit swap-after-loading still has a place where the
+code is doing a load of a whole structure out of the
+guest and then swapping each struct field after the fact,
+because it means we can do a single load-from-guest-memory
+rather than a whole sequence of calls all the way down
+through the memory subsystem.)
+
+thanks
+-- PMM
+
+On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
+On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
+CCing Jason.
+
+On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
+>
+> The virtio packed virtqueue support patch[1] suggests converting
+> endianness by lines:
+>
+> virtio_tswap16s(vdev, &e->off_wrap);
+> virtio_tswap16s(vdev, &e->flags);
+>
+> Though both of these conversion statements aren't present in the
+> latest qemu code here[2]
+>
+> Is this intentional?
+
+Good catch!
+
+It looks like it was removed (maybe by mistake) by commit
+d152cdd6f6 ("virtio: use virtio accessor to access packed event")
+That commit changes from:
+
+-    address_space_read_cached(cache, off_off, &e->off_wrap,
+-                              sizeof(e->off_wrap));
+-    virtio_tswap16s(vdev, &e->off_wrap);
+
+which does a byte read of 2 bytes and then swaps the bytes
+depending on the host endianness and the value of
+virtio_access_is_big_endian()
+
+to this:
+
++    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+
+virtio_lduw_phys_cached() is a small function which calls
+either lduw_be_phys_cached() or lduw_le_phys_cached()
+depending on the value of virtio_access_is_big_endian().
+(And lduw_be_phys_cached() and lduw_le_phys_cached() do
+the right thing for the host-endianness to do a "load
+a specifically big or little endian 16-bit value".)
+
+Which is to say that because we use a load/store function that's
+explicit about the size of the data type it is accessing, the
+function itself can handle doing the load as big or little
+endian, rather than the calling code having to do a manual swap after
+it has done a load-as-bag-of-bytes. This is generally preferable
+as it's less error-prone.
+Thanks for the details!
+
+So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
+
+I mean:
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+index 893a072c9d..2e5e67bdb9 100644
+--- a/hw/virtio/virtio.c
++++ b/hw/virtio/virtio.c
+@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
+     /* Make sure flags is seen before off_wrap */
+     smp_rmb();
+     e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+-    virtio_tswap16s(vdev, &e->flags);
+ }
+
+ static void vring_packed_off_wrap_write(VirtIODevice *vdev,
+
+Thanks,
+Stefano
+(Explicit swap-after-loading still has a place where the
+code is doing a load of a whole structure out of the
+guest and then swapping each struct field after the fact,
+because it means we can do a single load-from-guest-memory
+rather than a whole sequence of calls all the way down
+through the memory subsystem.)
+
+thanks
+-- PMM
+
+On Tue, 25 Jun 2024 at 08:18, Stefano Garzarella <sgarzare@redhat.com> wrote:
+>
+>
+On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
+>
+>On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
+>
+>>
+>
+>> CCing Jason.
+>
+>>
+>
+>> On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
+>
+>> >
+>
+>> > The virtio packed virtqueue support patch[1] suggests converting
+>
+>> > endianness by lines:
+>
+>> >
+>
+>> > virtio_tswap16s(vdev, &e->off_wrap);
+>
+>> > virtio_tswap16s(vdev, &e->flags);
+>
+>> >
+>
+>> > Though both of these conversion statements aren't present in the
+>
+>> > latest qemu code here[2]
+>
+>> >
+>
+>> > Is this intentional?
+>
+>>
+>
+>> Good catch!
+>
+>>
+>
+>> It looks like it was removed (maybe by mistake) by commit
+>
+>> d152cdd6f6 ("virtio: use virtio accessor to access packed event")
+>
+>
+>
+>That commit changes from:
+>
+>
+>
+>-    address_space_read_cached(cache, off_off, &e->off_wrap,
+>
+>-                              sizeof(e->off_wrap));
+>
+>-    virtio_tswap16s(vdev, &e->off_wrap);
+>
+>
+>
+>which does a byte read of 2 bytes and then swaps the bytes
+>
+>depending on the host endianness and the value of
+>
+>virtio_access_is_big_endian()
+>
+>
+>
+>to this:
+>
+>
+>
+>+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+>
+>
+>
+>virtio_lduw_phys_cached() is a small function which calls
+>
+>either lduw_be_phys_cached() or lduw_le_phys_cached()
+>
+>depending on the value of virtio_access_is_big_endian().
+>
+>(And lduw_be_phys_cached() and lduw_le_phys_cached() do
+>
+>the right thing for the host-endianness to do a "load
+>
+>a specifically big or little endian 16-bit value".)
+>
+>
+>
+>Which is to say that because we use a load/store function that's
+>
+>explicit about the size of the data type it is accessing, the
+>
+>function itself can handle doing the load as big or little
+>
+>endian, rather than the calling code having to do a manual swap after
+>
+>it has done a load-as-bag-of-bytes. This is generally preferable
+>
+>as it's less error-prone.
+>
+>
+Thanks for the details!
+>
+>
+So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
+>
+>
+I mean:
+>
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+>
+index 893a072c9d..2e5e67bdb9 100644
+>
+--- a/hw/virtio/virtio.c
+>
++++ b/hw/virtio/virtio.c
+>
+@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
+>
+/* Make sure flags is seen before off_wrap */
+>
+smp_rmb();
+>
+e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+>
+-    virtio_tswap16s(vdev, &e->flags);
+>
+}
+That definitely looks like it's probably not correct...
+
+-- PMM
+
+On Fri, Jun 28, 2024 at 03:53:09PM GMT, Peter Maydell wrote:
+On Tue, 25 Jun 2024 at 08:18, Stefano Garzarella <sgarzare@redhat.com> wrote:
+On Mon, Jun 24, 2024 at 04:19:52PM GMT, Peter Maydell wrote:
+>On Mon, 24 Jun 2024 at 16:11, Stefano Garzarella <sgarzare@redhat.com> wrote:
+>>
+>> CCing Jason.
+>>
+>> On Mon, Jun 24, 2024 at 4:30 PM Xoykie <xoykie@gmail.com> wrote:
+>> >
+>> > The virtio packed virtqueue support patch[1] suggests converting
+>> > endianness by lines:
+>> >
+>> > virtio_tswap16s(vdev, &e->off_wrap);
+>> > virtio_tswap16s(vdev, &e->flags);
+>> >
+>> > Though both of these conversion statements aren't present in the
+>> > latest qemu code here[2]
+>> >
+>> > Is this intentional?
+>>
+>> Good catch!
+>>
+>> It looks like it was removed (maybe by mistake) by commit
+>> d152cdd6f6 ("virtio: use virtio accessor to access packed event")
+>
+>That commit changes from:
+>
+>-    address_space_read_cached(cache, off_off, &e->off_wrap,
+>-                              sizeof(e->off_wrap));
+>-    virtio_tswap16s(vdev, &e->off_wrap);
+>
+>which does a byte read of 2 bytes and then swaps the bytes
+>depending on the host endianness and the value of
+>virtio_access_is_big_endian()
+>
+>to this:
+>
+>+    e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+>
+>virtio_lduw_phys_cached() is a small function which calls
+>either lduw_be_phys_cached() or lduw_le_phys_cached()
+>depending on the value of virtio_access_is_big_endian().
+>(And lduw_be_phys_cached() and lduw_le_phys_cached() do
+>the right thing for the host-endianness to do a "load
+>a specifically big or little endian 16-bit value".)
+>
+>Which is to say that because we use a load/store function that's
+>explicit about the size of the data type it is accessing, the
+>function itself can handle doing the load as big or little
+>endian, rather than the calling code having to do a manual swap after
+>it has done a load-as-bag-of-bytes. This is generally preferable
+>as it's less error-prone.
+
+Thanks for the details!
+
+So, should we also remove `virtio_tswap16s(vdev, &e->flags);` ?
+
+I mean:
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+index 893a072c9d..2e5e67bdb9 100644
+--- a/hw/virtio/virtio.c
++++ b/hw/virtio/virtio.c
+@@ -323,7 +323,6 @@ static void vring_packed_event_read(VirtIODevice *vdev,
+      /* Make sure flags is seen before off_wrap */
+      smp_rmb();
+      e->off_wrap = virtio_lduw_phys_cached(vdev, cache, off_off);
+-    virtio_tswap16s(vdev, &e->flags);
+  }
+That definitely looks like it's probably not correct...
+Yeah, I just sent that patch:
+20240701075208.19634-1-sgarzare@redhat.com
+">https://lore.kernel.org/qemu-devel/
+20240701075208.19634-1-sgarzare@redhat.com
+We can continue the discussion there.
+
+Thanks,
+Stefano
+
diff --git a/results/classifier/zero-shot/010/review/43643137 b/results/classifier/zero-shot/010/review/43643137
new file mode 100644
index 00000000..88a572a1
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/43643137
@@ -0,0 +1,562 @@
+KVM: 0.794
+performance: 0.784
+other: 0.781
+debug: 0.775
+semantic: 0.764
+device: 0.760
+permissions: 0.755
+PID: 0.742
+vnc: 0.742
+graphic: 0.721
+network: 0.709
+socket: 0.674
+boot: 0.652
+files: 0.612
+boot: 0.933
+debug: 0.726
+KVM: 0.449
+PID: 0.047
+other: 0.015
+files: 0.014
+performance: 0.013
+semantic: 0.011
+socket: 0.008
+network: 0.007
+device: 0.007
+vnc: 0.004
+permissions: 0.004
+graphic: 0.001
+
+[Qemu-devel] [BUG/RFC] INIT IPI lost when VM starts
+
+Hi,
+We encountered a problem that when a domain starts, seabios failed to online a 
+vCPU.
+
+After investigation, we found that the reason is in kvm-kmod, KVM_APIC_INIT bit 
+in
+vcpu->arch.apic->pending_events was overwritten by qemu, and thus an INIT IPI 
+sent
+to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp command 
+to qemu
+on VM start.
+
+In qemu, qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
+do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from kvm-kmod and
+sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
+kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus pending_events is
+overwritten by qemu.
+
+I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true after 
+‘query-cpus’,
+and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am not sure 
+whether
+it is OK for qemu to set cpu->kvm_vcpu_dirty in do_kvm_cpu_synchronize_state in 
+each caller.
+
+What’s your opinion?
+
+Let me clarify it more clearly. Time sequence is that qemu handles ‘query-cpus’ qmp 
+command, vcpu 1 (and vcpu 0) got registers from kvm-kmod (qmp_query_cpus-> 
+cpu_synchronize_state-> kvm_cpu_synchronize_state->
+> do_kvm_cpu_synchronize_state-> kvm_arch_get_registers), then vcpu 0 (BSP) 
+sends INIT-SIPI to vcpu 1(AP). In kvm-kmod, vcpu 1’s pending_events’s KVM_APIC_INIT 
+bit set.
+Then vcpu 1 continue running, vcpu1 thread in qemu calls 
+kvm_arch_put_registers-> kvm_put_vcpu_events, so KVM_APIC_INIT bit in vcpu 1’s 
+pending_events got cleared, i.e., lost.
+
+In kvm-kmod, except for pending_events, sipi_vector may also be overwritten., 
+so I am not sure if there are other fields/registers in danger, i.e., those may 
+be modified asynchronously with vcpu thread itself.
+
+BTW, using a sleep like following can reliably reproduce this problem, if VM 
+equipped with more than 2 vcpus and starting VM using libvirtd.
+
+diff --git a/target/i386/kvm.c b/target/i386/kvm.c
+index 55865db..5099290 100644
+--- a/target/i386/kvm.c
++++ b/target/i386/kvm.c
+@@ -2534,6 +2534,11 @@ static int kvm_put_vcpu_events(X86CPU *cpu, int level)
+             KVM_VCPUEVENT_VALID_NMI_PENDING | KVM_VCPUEVENT_VALID_SIPI_VECTOR;
+     }
+
++    if (CPU(cpu)->cpu_index == 1) {
++        fprintf(stderr, "vcpu 1 sleep!!!!\n");
++        sleep(10);
++    }
++
+     return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_VCPU_EVENTS, &events);
+ }
+
+
+On 2017/3/20 22:21, Herongguang (Stephen) wrote:
+Hi,
+We encountered a problem that when a domain starts, seabios failed to online a 
+vCPU.
+
+After investigation, we found that the reason is in kvm-kmod, KVM_APIC_INIT bit 
+in
+vcpu->arch.apic->pending_events was overwritten by qemu, and thus an INIT IPI 
+sent
+to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp command 
+to qemu
+on VM start.
+
+In qemu, qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
+do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from kvm-kmod and
+sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
+kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus pending_events is
+overwritten by qemu.
+
+I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true after 
+‘query-cpus’,
+and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am not sure 
+whether
+it is OK for qemu to set cpu->kvm_vcpu_dirty in do_kvm_cpu_synchronize_state in 
+each caller.
+
+What’s your opinion?
+
+On 20/03/2017 15:21, Herongguang (Stephen) wrote:
+>
+>
+We encountered a problem that when a domain starts, seabios failed to
+>
+online a vCPU.
+>
+>
+After investigation, we found that the reason is in kvm-kmod,
+>
+KVM_APIC_INIT bit in
+>
+vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
+>
+INIT IPI sent
+>
+to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
+>
+command to qemu
+>
+on VM start.
+>
+>
+In qemu, qmp_query_cpus-> cpu_synchronize_state->
+>
+kvm_cpu_synchronize_state->
+>
+do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
+>
+kvm-kmod and
+>
+sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
+>
+kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
+>
+pending_events is
+>
+overwritten by qemu.
+>
+>
+I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
+>
+after ‘query-cpus’,
+>
+and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
+>
+not sure whether
+>
+it is OK for qemu to set cpu->kvm_vcpu_dirty in
+>
+do_kvm_cpu_synchronize_state in each caller.
+>
+>
+What’s your opinion?
+Hi Rongguang,
+
+sorry for the late response.
+
+Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear the
+bit, but the result of the INIT is stored in mp_state.
+
+kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
+KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
+it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
+but I would like to understand the exact sequence of events.
+
+Thanks,
+
+paolo
+
+On 2017/4/6 0:16, Paolo Bonzini wrote:
+On 20/03/2017 15:21, Herongguang (Stephen) wrote:
+We encountered a problem that when a domain starts, seabios failed to
+online a vCPU.
+
+After investigation, we found that the reason is in kvm-kmod,
+KVM_APIC_INIT bit in
+vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
+INIT IPI sent
+to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
+command to qemu
+on VM start.
+
+In qemu, qmp_query_cpus-> cpu_synchronize_state->
+kvm_cpu_synchronize_state->
+do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
+kvm-kmod and
+sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
+kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
+pending_events is
+overwritten by qemu.
+
+I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
+after ‘query-cpus’,
+and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
+not sure whether
+it is OK for qemu to set cpu->kvm_vcpu_dirty in
+do_kvm_cpu_synchronize_state in each caller.
+
+What’s your opinion?
+Hi Rongguang,
+
+sorry for the late response.
+
+Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear the
+bit, but the result of the INIT is stored in mp_state.
+It's dropped in KVM_SET_VCPU_EVENTS, see below.
+kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
+KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
+it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
+but I would like to understand the exact sequence of events.
+time0:
+vcpu1:
+qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
+> do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to true)-> 
+kvm_arch_get_registers(KVM_APIC_INIT bit in vcpu->arch.apic->pending_events was not set)
+
+time1:
+vcpu0:
+send INIT-SIPI to all AP->(in vcpu 0's context)__apic_accept_irq(KVM_APIC_INIT bit 
+in vcpu1's arch.apic->pending_events is set)
+
+time2:
+vcpu1:
+kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is 
+true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten KVM_APIC_INIT bit in 
+vcpu->arch.apic->pending_events!)
+
+So it's a race between vcpu1 get/put registers with kvm/other vcpus changing 
+vcpu1's status/structure fields in the mean time, I am in worry of if there are 
+other fields may be overwritten,
+sipi_vector is one.
+
+also see:
+https://www.mail-archive.com/address@hidden/msg438675.html
+Thanks,
+
+paolo
+
+.
+
+Hi Paolo,
+
+What's your opinion about this patch? We found it just before finishing patches 
+for the past two days.
+
+
+Thanks,
+-Gonglei
+
+
+>
+-----Original Message-----
+>
+From: address@hidden [
+mailto:address@hidden
+On
+>
+Behalf Of Herongguang (Stephen)
+>
+Sent: Thursday, April 06, 2017 9:47 AM
+>
+To: Paolo Bonzini; address@hidden; address@hidden;
+>
+address@hidden; address@hidden; address@hidden;
+>
+wangxin (U); Huangweidong (C)
+>
+Subject: Re: [BUG/RFC] INIT IPI lost when VM starts
+>
+>
+>
+>
+On 2017/4/6 0:16, Paolo Bonzini wrote:
+>
+>
+>
+> On 20/03/2017 15:21, Herongguang (Stephen) wrote:
+>
+>> We encountered a problem that when a domain starts, seabios failed to
+>
+>> online a vCPU.
+>
+>>
+>
+>> After investigation, we found that the reason is in kvm-kmod,
+>
+>> KVM_APIC_INIT bit in
+>
+>> vcpu->arch.apic->pending_events was overwritten by qemu, and thus an
+>
+>> INIT IPI sent
+>
+>> to AP was lost. Qemu does this since libvirtd sends a ‘query-cpus’ qmp
+>
+>> command to qemu
+>
+>> on VM start.
+>
+>>
+>
+>> In qemu, qmp_query_cpus-> cpu_synchronize_state->
+>
+>> kvm_cpu_synchronize_state->
+>
+>> do_kvm_cpu_synchronize_state, qemu gets registers/vcpu_events from
+>
+>> kvm-kmod and
+>
+>> sets cpu->kvm_vcpu_dirty to true, and vcpu thread in qemu will call
+>
+>> kvm_arch_put_registers if cpu->kvm_vcpu_dirty is true, thus
+>
+>> pending_events is
+>
+>> overwritten by qemu.
+>
+>>
+>
+>> I think there is no need for qemu to set cpu->kvm_vcpu_dirty to true
+>
+>> after ‘query-cpus’,
+>
+>> and  kvm-kmod should not clear KVM_APIC_INIT unconditionally. And I am
+>
+>> not sure whether
+>
+>> it is OK for qemu to set cpu->kvm_vcpu_dirty in
+>
+>> do_kvm_cpu_synchronize_state in each caller.
+>
+>>
+>
+>> What’s your opinion?
+>
+> Hi Rongguang,
+>
+>
+>
+> sorry for the late response.
+>
+>
+>
+> Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear
+>
+the
+>
+> bit, but the result of the INIT is stored in mp_state.
+>
+>
+It's dropped in KVM_SET_VCPU_EVENTS, see below.
+>
+>
+>
+>
+> kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
+>
+> KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
+>
+> it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
+>
+> but I would like to understand the exact sequence of events.
+>
+>
+time0:
+>
+vcpu1:
+>
+qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
+>
+> do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to
+>
+true)-> kvm_arch_get_registers(KVM_APIC_INIT bit in
+>
+vcpu->arch.apic->pending_events was not set)
+>
+>
+time1:
+>
+vcpu0:
+>
+send INIT-SIPI to all AP->(in vcpu 0's
+>
+context)__apic_accept_irq(KVM_APIC_INIT bit in vcpu1's
+>
+arch.apic->pending_events is set)
+>
+>
+time2:
+>
+vcpu1:
+>
+kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is
+>
+true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten
+>
+KVM_APIC_INIT bit in vcpu->arch.apic->pending_events!)
+>
+>
+So it's a race between vcpu1 get/put registers with kvm/other vcpus changing
+>
+vcpu1's status/structure fields in the mean time, I am in worry of if there
+>
+are
+>
+other fields may be overwritten,
+>
+sipi_vector is one.
+>
+>
+also see:
+>
+https://www.mail-archive.com/address@hidden/msg438675.html
+>
+>
+> Thanks,
+>
+>
+>
+> paolo
+>
+>
+>
+> .
+>
+>
+>
+
+2017-11-20 06:57+0000, Gonglei (Arei):
+>
+Hi Paolo,
+>
+>
+What's your opinion about this patch? We found it just before finishing
+>
+patches
+>
+for the past two days.
+I think your case was fixed by f4ef19108608 ("KVM: X86: Fix loss of
+pending INIT due to race"), but that patch didn't fix it perfectly, so
+maybe you're hitting a similar case that happens in SMM ...
+
+>
+> -----Original Message-----
+>
+> From: address@hidden [
+mailto:address@hidden
+On
+>
+> Behalf Of Herongguang (Stephen)
+>
+> On 2017/4/6 0:16, Paolo Bonzini wrote:
+>
+> > Hi Rongguang,
+>
+> >
+>
+> > sorry for the late response.
+>
+> >
+>
+> > Where exactly is KVM_APIC_INIT dropped?  kvm_get_mp_state does clear
+>
+> the
+>
+> > bit, but the result of the INIT is stored in mp_state.
+>
+>
+>
+> It's dropped in KVM_SET_VCPU_EVENTS, see below.
+>
+>
+>
+> >
+>
+> > kvm_get_vcpu_events is called after kvm_get_mp_state; it retrieves
+>
+> > KVM_APIC_INIT in events.smi.latched_init and kvm_set_vcpu_events passes
+>
+> > it back.  Maybe it should ignore events.smi.latched_init if not in SMM,
+>
+> > but I would like to understand the exact sequence of events.
+>
+>
+>
+> time0:
+>
+> vcpu1:
+>
+> qmp_query_cpus-> cpu_synchronize_state-> kvm_cpu_synchronize_state->
+>
+>  > do_kvm_cpu_synchronize_state(and set vcpu1's cpu->kvm_vcpu_dirty to
+>
+> true)-> kvm_arch_get_registers(KVM_APIC_INIT bit in
+>
+> vcpu->arch.apic->pending_events was not set)
+>
+>
+>
+> time1:
+>
+> vcpu0:
+>
+> send INIT-SIPI to all AP->(in vcpu 0's
+>
+> context)__apic_accept_irq(KVM_APIC_INIT bit in vcpu1's
+>
+> arch.apic->pending_events is set)
+>
+>
+>
+> time2:
+>
+> vcpu1:
+>
+> kvm_cpu_exec->(if cpu->kvm_vcpu_dirty is
+>
+> true)kvm_arch_put_registers->kvm_put_vcpu_events(overwritten
+>
+> KVM_APIC_INIT bit in vcpu->arch.apic->pending_events!)
+>
+>
+>
+> So it's a race between vcpu1 get/put registers with kvm/other vcpus changing
+>
+> vcpu1's status/structure fields in the mean time, I am in worry of if there
+>
+> are
+>
+> other fields may be overwritten,
+>
+> sipi_vector is one.
+Fields that can be asynchronously written by other VCPUs (like SIPI,
+NMI) must not be SET if other VCPUs were not paused since the last GET.
+(Looking at the interface, we can currently lose pending SMI.)
+
+INIT is one of the restricted fields, but the API unconditionally
+couples SMM with latched INIT, which means that we can lose an INIT if
+the VCPU is in SMM mode -- do you see SMM in kvm_vcpu_events?
+
+Thanks.
+
diff --git a/results/classifier/zero-shot/010/review/46572227 b/results/classifier/zero-shot/010/review/46572227
new file mode 100644
index 00000000..80481fff
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/46572227
@@ -0,0 +1,430 @@
+semantic: 0.965
+graphic: 0.962
+debug: 0.958
+permissions: 0.955
+PID: 0.937
+performance: 0.935
+other: 0.927
+vnc: 0.904
+device: 0.901
+boot: 0.900
+files: 0.879
+KVM: 0.857
+network: 0.841
+socket: 0.841
+performance: 0.100
+debug: 0.091
+vnc: 0.088
+KVM: 0.065
+network: 0.025
+files: 0.015
+socket: 0.013
+boot: 0.009
+device: 0.009
+other: 0.009
+PID: 0.007
+permissions: 0.006
+semantic: 0.004
+graphic: 0.001
+
+[Qemu-devel] [Bug?] Windows 7's time drift obviously while RTC rate switching frequently between high and low timer rate
+
+Hi,
+
+We tested with the latest QEMU, and found that time drift obviously (clock fast 
+in guest)
+in Windows 7 64 bits guest in some cases.
+
+It is easily to reproduce, using the follow QEMU command line to start windows 
+7:
+
+# x86_64-softmmu/qemu-system-x86_64 -name win7_64_2U_raw -machine 
+pc-i440fx-2.6,accel=kvm,usb=off -cpu host -m 2048 -realtime mlock=off -smp 
+4,sockets=2,cores=2,threads=1 -rtc base=utc,clock=vm,driftfix=slew -no-hpet 
+-global kvm-pit.lost_tick_policy=discard -hda /mnt/nfs/win7_sp1_32_2U_raw -vnc 
+:11 -netdev tap,id=hn0,vhost=off -device rtl8139,id=net-pci0,netdev=hn0 -device 
+piix3-usb-uhci,id=usb -device usb-tablet,id=input0 -device usb-mouse,id=input1 
+-device usb-kbd,id=input2 -monitor stdio
+
+Adjust the VM's time to host time, and run java application or run the follow 
+program
+in windows 7:
+
+#pragma comment(lib, "winmm")
+#include <stdio.h>
+#include <windows.h>
+
+#define SWITCH_PEROID  13
+
+int main()
+{
+        DWORD count = 0;
+
+        while (1)
+        {
+                count++;
+                timeBeginPeriod(1);
+                DWORD start = timeGetTime();
+                Sleep(40);
+                timeEndPeriod(1);
+                if ((count % SWITCH_PEROID) == 0) {
+                        Sleep(1);
+                }
+        }
+        return 0;
+}
+
+After few minutes, you will find that the time in windows 7 goes ahead of the
+host time, drifts about several seconds.
+
+I have dug deeper in this problem. For windows systems that use the CMOS timer,
+the base interrupt rate is usually 64Hz, but running some application in VM
+will raise the timer rate to 1024Hz, running java application and or above
+program will raise the timer rate.
+Besides, Windows operating systems generally keep time by counting timer
+interrupts (ticks). But QEMU seems not emulate the rate converting fine.
+
+We update the timer in function periodic_timer_update():
+static void periodic_timer_update(RTCState *s, int64_t current_time)
+{
+
+        cur_clock = muldiv64(current_time, RTC_CLOCK_RATE, get_ticks_per_sec());
+        next_irq_clock = (cur_clock & ~(period - 1)) + period;
+                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Here we calculate the next interrupt time by align the current clock with the
+new period, I'm a little confused that why we care about the *history* time ?
+If VM switches from high rate to low rate, the next interrupt time may come
+earlier than it supposed to be. We have observed it in our test. we printed the
+interval time of interrupts and the VM's current time (We got the time from VM).
+
+Here is part of the log:
+... ...
+period=512 irq inject 1534: 15625 us
+Tue Mar 29 04:38:00 2016
+*irq_num_period_32=0, irq_num_period_512=64: [3]: Real time interval is 999696 
+us
+... ...
+*irq_num_period_32=893, irq_num_period_512=9 [81]: Real time interval is 951086 
+us
+Convert 32 --- > 512: 703: 96578 us
+period=512 irq inject 44391: 12702 us
+Convert 512 --- > 32: 704: 12704 us11
+period=32 irq inject 44392: 979 us
+... ...
+32 --- > 512: 705: 24388 us
+period=512 irq inject 44417: 6834 us
+Convert 512 --- > 32: 706: 6830 us
+period=32 irq inject 44418: 978 us
+... ...
+Convert 32 --- > 512: 707: 60525 us
+period=512 irq inject 44480: 1945 us
+Convert 512 --- > 32: 708: 1955 us
+period=32 irq inject 44481: 977 us
+... ...
+Convert 32 --- > 512: 709: 36105 us
+period=512 irq inject 44518: 10741 us
+Convert 512 --- > 32: 710: 10736 us
+period=32 irq inject 44519: 989 us
+... ...
+Convert 32 --- > 512: 711: 123998 us
+period=512 irq inject 44646: 974 us
+period=512 irq inject 44647: 15607 us
+Convert 512 --- > 32: 712: 16560 us
+period=32 irq inject 44648: 980 us
+... ...
+period=32 irq inject 44738: 974 us
+Convert 32 --- > 512: 713: 88828 us
+period=512 irq inject 44739: 4885 us
+Convert 512 --- > 32: 714: 4882 us
+period=32 irq inject 44740: 989 us
+... ...
+period=32 irq inject 44842: 974 us
+Convert 32 --- > 512: 715: 100537 us
+period=512 irq inject 44843: 8788 us
+Convert 512 --- > 32: 716: 8789 us
+period=32 irq inject 44844: 972 us
+... ...
+period=32 irq inject 44941: 979 us
+Convert 32 --- > 512: 717: 95677 us
+period=512 irq inject 44942: 13661 us
+Convert 512 --- > 32: 718: 13657 us
+period=32 irq inject 44943: 987 us
+... ...
+Convert 32 --- > 512: 719: 94690 us
+period=512 irq inject 45040: 14643 us
+Convert 512 --- > 32: 720: 14642 us
+period=32 irq inject 45041: 974 us
+... ...
+Convert 32 --- > 512: 721: 88848 us
+period=512 irq inject 45132: 4892 us
+Convert 512 --- > 32: 722: 4931 us
+period=32 irq inject 45133: 964 us
+... ...
+Tue Mar 29 04:39:19 2016
+*irq_num_period_32:835, irq_num_period_512:11 [82], Real time interval is 
+911520 us
+
+For windows 7, it has got 835 IRQs which injected during the period of 32,
+and got 11 IRQs that injected during the period of 512. it updated the 
+wall-clock
+time with one second, because it supposed it has counted
+(835*976.5+11*15625)= 987252.5 us, but the real interval time is 911520 us.
+
+IMHO, we should calculate the next interrupt time based on the time of last
+interrupt injected, and it seems to be more similar with hardware CMOS timer
+in this way.
+Maybe someone can tell me the reason why we calculated the interrupt timer
+in that way, or is it a bug ? ;)
+
+Thanks,
+Hailiang
+
+ping...
+
+It seems that we can eliminate the drift by the following patch.
+(I tested it for two hours, and there is no drift, before, the timer
+in Windows 7 drifts about 2 seconds per minute.) I'm not sure if it is
+the right way to solve the problem.
+Any comments are welcomed. Thanks.
+
+From bd6acd577cbbc9d92d6376c770219470f184f7de Mon Sep 17 00:00:00 2001
+From: zhanghailiang <address@hidden>
+Date: Thu, 31 Mar 2016 16:36:15 -0400
+Subject: [PATCH] timer/mc146818rtc: fix timer drift in Windows OS while RTC
+ rate converting frequently
+
+Signed-off-by: zhanghailiang <address@hidden>
+---
+ hw/timer/mc146818rtc.c | 25 ++++++++++++++++++++++---
+ 1 file changed, 22 insertions(+), 3 deletions(-)
+
+diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c
+index 2ac0fd3..e39d2da 100644
+--- a/hw/timer/mc146818rtc.c
++++ b/hw/timer/mc146818rtc.c
+@@ -79,6 +79,7 @@ typedef struct RTCState {
+     /* periodic timer */
+     QEMUTimer *periodic_timer;
+     int64_t next_periodic_time;
++    uint64_t last_periodic_time;
+     /* update-ended timer */
+     QEMUTimer *update_timer;
+     uint64_t next_alarm_time;
+@@ -152,7 +153,8 @@ static void rtc_coalesced_timer(void *opaque)
+ static void periodic_timer_update(RTCState *s, int64_t current_time)
+ {
+     int period_code, period;
+-    int64_t cur_clock, next_irq_clock;
++    int64_t cur_clock, next_irq_clock, pre_irq_clock;
++    bool change = false;
+
+     period_code = s->cmos_data[RTC_REG_A] & 0x0f;
+     if (period_code != 0
+@@ -165,14 +167,28 @@ static void periodic_timer_update(RTCState *s, int64_t 
+current_time)
+         if (period != s->period) {
+             s->irq_coalesced = (s->irq_coalesced * s->period) / period;
+             DPRINTF_C("cmos: coalesced irqs scaled to %d\n", s->irq_coalesced);
++            if (s->period && period) {
++                change = true;
++            }
+         }
+         s->period = period;
+ #endif
+         /* compute 32 khz clock */
+         cur_clock =
+             muldiv64(current_time, RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
++        if (change) {
++            int offset = 0;
+
+-        next_irq_clock = (cur_clock & ~(period - 1)) + period;
++            pre_irq_clock = muldiv64(s->last_periodic_time, RTC_CLOCK_RATE,
++                                    NANOSECONDS_PER_SECOND);
++            if ((cur_clock - pre_irq_clock) >  period) {
++                offset =  (cur_clock - pre_irq_clock) / period;
++            }
++            s->irq_coalesced += offset;
++            next_irq_clock = pre_irq_clock + (offset + 1) * period;
++        } else {
++            next_irq_clock = (cur_clock & ~(period - 1)) + period;
++        }
+         s->next_periodic_time = muldiv64(next_irq_clock, 
+NANOSECONDS_PER_SECOND,
+                                          RTC_CLOCK_RATE) + 1;
+         timer_mod(s->periodic_timer, s->next_periodic_time);
+@@ -187,7 +203,9 @@ static void periodic_timer_update(RTCState *s, int64_t 
+current_time)
+ static void rtc_periodic_timer(void *opaque)
+ {
+     RTCState *s = opaque;
+-
++    int64_t next_periodic_time;
++
++    next_periodic_time = s->next_periodic_time;
+     periodic_timer_update(s, s->next_periodic_time);
+     s->cmos_data[RTC_REG_C] |= REG_C_PF;
+     if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
+@@ -204,6 +222,7 @@ static void rtc_periodic_timer(void *opaque)
+                 DPRINTF_C("cmos: coalesced irqs increased to %d\n",
+                           s->irq_coalesced);
+             }
++            s->last_periodic_time = next_periodic_time;
+         } else
+ #endif
+         qemu_irq_raise(s->irq);
+--
+1.8.3.1
+
+
+On 2016/3/29 19:58, Hailiang Zhang wrote:
+Hi,
+
+We tested with the latest QEMU, and found that time drift obviously (clock fast 
+in guest)
+in Windows 7 64 bits guest in some cases.
+
+It is easily to reproduce, using the follow QEMU command line to start windows 
+7:
+
+# x86_64-softmmu/qemu-system-x86_64 -name win7_64_2U_raw -machine 
+pc-i440fx-2.6,accel=kvm,usb=off -cpu host -m 2048 -realtime mlock=off -smp 
+4,sockets=2,cores=2,threads=1 -rtc base=utc,clock=vm,driftfix=slew -no-hpet 
+-global kvm-pit.lost_tick_policy=discard -hda /mnt/nfs/win7_sp1_32_2U_raw -vnc 
+:11 -netdev tap,id=hn0,vhost=off -device rtl8139,id=net-pci0,netdev=hn0 -device 
+piix3-usb-uhci,id=usb -device usb-tablet,id=input0 -device usb-mouse,id=input1 
+-device usb-kbd,id=input2 -monitor stdio
+
+Adjust the VM's time to host time, and run java application or run the follow 
+program
+in windows 7:
+
+#pragma comment(lib, "winmm")
+#include <stdio.h>
+#include <windows.h>
+
+#define SWITCH_PEROID  13
+
+int main()
+{
+        DWORD count = 0;
+
+        while (1)
+        {
+                count++;
+                timeBeginPeriod(1);
+                DWORD start = timeGetTime();
+                Sleep(40);
+                timeEndPeriod(1);
+                if ((count % SWITCH_PEROID) == 0) {
+                        Sleep(1);
+                }
+        }
+        return 0;
+}
+
+After few minutes, you will find that the time in windows 7 goes ahead of the
+host time, drifts about several seconds.
+
+I have dug deeper in this problem. For windows systems that use the CMOS timer,
+the base interrupt rate is usually 64Hz, but running some application in VM
+will raise the timer rate to 1024Hz, running java application and or above
+program will raise the timer rate.
+Besides, Windows operating systems generally keep time by counting timer
+interrupts (ticks). But QEMU seems not emulate the rate converting fine.
+
+We update the timer in function periodic_timer_update():
+static void periodic_timer_update(RTCState *s, int64_t current_time)
+{
+
+          cur_clock = muldiv64(current_time, RTC_CLOCK_RATE, 
+get_ticks_per_sec());
+          next_irq_clock = (cur_clock & ~(period - 1)) + period;
+                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Here we calculate the next interrupt time by align the current clock with the
+new period, I'm a little confused that why we care about the *history* time ?
+If VM switches from high rate to low rate, the next interrupt time may come
+earlier than it supposed to be. We have observed it in our test. we printed the
+interval time of interrupts and the VM's current time (We got the time from VM).
+
+Here is part of the log:
+... ...
+period=512 irq inject 1534: 15625 us
+Tue Mar 29 04:38:00 2016
+*irq_num_period_32=0, irq_num_period_512=64: [3]: Real time interval is 999696 
+us
+... ...
+*irq_num_period_32=893, irq_num_period_512=9 [81]: Real time interval is 951086 
+us
+Convert 32 --- > 512: 703: 96578 us
+period=512 irq inject 44391: 12702 us
+Convert 512 --- > 32: 704: 12704 us11
+period=32 irq inject 44392: 979 us
+... ...
+32 --- > 512: 705: 24388 us
+period=512 irq inject 44417: 6834 us
+Convert 512 --- > 32: 706: 6830 us
+period=32 irq inject 44418: 978 us
+... ...
+Convert 32 --- > 512: 707: 60525 us
+period=512 irq inject 44480: 1945 us
+Convert 512 --- > 32: 708: 1955 us
+period=32 irq inject 44481: 977 us
+... ...
+Convert 32 --- > 512: 709: 36105 us
+period=512 irq inject 44518: 10741 us
+Convert 512 --- > 32: 710: 10736 us
+period=32 irq inject 44519: 989 us
+... ...
+Convert 32 --- > 512: 711: 123998 us
+period=512 irq inject 44646: 974 us
+period=512 irq inject 44647: 15607 us
+Convert 512 --- > 32: 712: 16560 us
+period=32 irq inject 44648: 980 us
+... ...
+period=32 irq inject 44738: 974 us
+Convert 32 --- > 512: 713: 88828 us
+period=512 irq inject 44739: 4885 us
+Convert 512 --- > 32: 714: 4882 us
+period=32 irq inject 44740: 989 us
+... ...
+period=32 irq inject 44842: 974 us
+Convert 32 --- > 512: 715: 100537 us
+period=512 irq inject 44843: 8788 us
+Convert 512 --- > 32: 716: 8789 us
+period=32 irq inject 44844: 972 us
+... ...
+period=32 irq inject 44941: 979 us
+Convert 32 --- > 512: 717: 95677 us
+period=512 irq inject 44942: 13661 us
+Convert 512 --- > 32: 718: 13657 us
+period=32 irq inject 44943: 987 us
+... ...
+Convert 32 --- > 512: 719: 94690 us
+period=512 irq inject 45040: 14643 us
+Convert 512 --- > 32: 720: 14642 us
+period=32 irq inject 45041: 974 us
+... ...
+Convert 32 --- > 512: 721: 88848 us
+period=512 irq inject 45132: 4892 us
+Convert 512 --- > 32: 722: 4931 us
+period=32 irq inject 45133: 964 us
+... ...
+Tue Mar 29 04:39:19 2016
+*irq_num_period_32:835, irq_num_period_512:11 [82], Real time interval is 
+911520 us
+
+For windows 7, it has got 835 IRQs which injected during the period of 32,
+and got 11 IRQs that injected during the period of 512. it updated the 
+wall-clock
+time with one second, because it supposed it has counted
+(835*976.5+11*15625)= 987252.5 us, but the real interval time is 911520 us.
+
+IMHO, we should calculate the next interrupt time based on the time of last
+interrupt injected, and it seems to be more similar with hardware CMOS timer
+in this way.
+Maybe someone can tell me the reason why we calculated the interrupt timer
+in that way, or is it a bug ? ;)
+
+Thanks,
+Hailiang
+
diff --git a/results/classifier/zero-shot/010/review/48245039 b/results/classifier/zero-shot/010/review/48245039
new file mode 100644
index 00000000..2dce8e75
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/48245039
@@ -0,0 +1,554 @@
+permissions: 0.966
+debug: 0.961
+PID: 0.954
+device: 0.953
+other: 0.953
+semantic: 0.939
+graphic: 0.935
+socket: 0.932
+boot: 0.932
+vnc: 0.926
+files: 0.924
+performance: 0.890
+KVM: 0.855
+network: 0.818
+performance: 0.642
+debug: 0.341
+device: 0.139
+boot: 0.111
+files: 0.104
+PID: 0.099
+vnc: 0.095
+socket: 0.085
+network: 0.081
+other: 0.057
+semantic: 0.025
+KVM: 0.010
+graphic: 0.004
+permissions: 0.002
+
+[Qemu-devel] [BUG] gcov support appears to be broken
+
+Hello, according to out docs, here is the procedure that should produce 
+coverage report for execution of the complete "make check":
+
+#./configure --enable-gcov
+#make
+#make check
+#make coverage-report
+
+It seems that first three commands execute as expected. (For example, there are 
+plenty of files generated by "make check" that would've not been generated if 
+"enable-gcov" hadn't been chosen.) However, the last command complains about 
+some missing files related to FP support. If those files are added (for 
+example, artificially, using "touch <missing-file"), that it starts complaining 
+about missing some decodetree-generated files. Other kinds of files are 
+involved too.
+
+It would be nice to have coverage support working. Please somebody take a look, 
+or explain if I make a mistake or misunderstood our gcov support.
+
+Yours,
+Aleksandar
+
+On Mon, 5 Aug 2019 at 11:39, Aleksandar Markovic <address@hidden> wrote:
+>
+>
+Hello, according to out docs, here is the procedure that should produce
+>
+coverage report for execution of the complete "make check":
+>
+>
+#./configure --enable-gcov
+>
+#make
+>
+#make check
+>
+#make coverage-report
+>
+>
+It seems that first three commands execute as expected. (For example, there
+>
+are plenty of files generated by "make check" that would've not been
+>
+generated if "enable-gcov" hadn't been chosen.) However, the last command
+>
+complains about some missing files related to FP support. If those files are
+>
+added (for example, artificially, using "touch <missing-file"), that it
+>
+starts complaining about missing some decodetree-generated files. Other kinds
+>
+of files are involved too.
+>
+>
+It would be nice to have coverage support working. Please somebody take a
+>
+look, or explain if I make a mistake or misunderstood our gcov support.
+Cc'ing Alex who's probably the closest we have to a gcov expert.
+
+(make/make check of a --enable-gcov build is in the set of things our
+Travis CI setup runs, so we do defend that part against regressions.)
+
+thanks
+-- PMM
+
+Peter Maydell <address@hidden> writes:
+
+>
+On Mon, 5 Aug 2019 at 11:39, Aleksandar Markovic <address@hidden> wrote:
+>
+>
+>
+> Hello, according to out docs, here is the procedure that should produce
+>
+> coverage report for execution of the complete "make check":
+>
+>
+>
+> #./configure --enable-gcov
+>
+> #make
+>
+> #make check
+>
+> #make coverage-report
+>
+>
+>
+> It seems that first three commands execute as expected. (For example,
+>
+> there are plenty of files generated by "make check" that would've not
+>
+> been generated if "enable-gcov" hadn't been chosen.) However, the
+>
+> last command complains about some missing files related to FP
+>
+> support. If those files are added (for example, artificially, using
+>
+> "touch <missing-file"), that it starts complaining about missing some
+>
+> decodetree-generated files. Other kinds of files are involved too.
+The gcov tool is fairly noisy about missing files but that just
+indicates the tests haven't exercised those code paths. "make check"
+especially doesn't touch much of the TCG code and a chunk of floating
+point.
+
+>
+>
+>
+> It would be nice to have coverage support working. Please somebody
+>
+> take a look, or explain if I make a mistake or misunderstood our gcov
+>
+> support.
+So your failure mode is no report is generated at all? It's working for
+me here.
+
+>
+>
+Cc'ing Alex who's probably the closest we have to a gcov expert.
+>
+>
+(make/make check of a --enable-gcov build is in the set of things our
+>
+Travis CI setup runs, so we do defend that part against regressions.)
+We defend the build but I have just checked and it seems our
+check_coverage script is currently failing:
+https://travis-ci.org/stsquad/qemu/jobs/567809808#L10328
+But as it's an after_success script it doesn't fail the build.
+
+>
+>
+thanks
+>
+-- PMM
+--
+Alex Bennée
+
+>
+> #./configure --enable-gcov
+>
+> #make
+>
+> #make check
+>
+> #make coverage-report
+>
+>
+>
+> It seems that first three commands execute as expected. (For example,
+>
+> there are plenty of files generated by "make check" that would've not
+>
+> been generated if "enable-gcov" hadn't been chosen.) However, the
+>
+> last command complains about some missing files related to FP
+>
+So your failure mode is no report is generated at all? It's working for
+>
+me here.
+Alex, no report is generated for my test setups - in fact, "make 
+coverage-report" even says that it explicitly deletes what appears to be the 
+main coverage report html file).
+
+This is the terminal output of an unsuccessful executions of "make 
+coverage-report" for recent ToT:
+
+~/Build/qemu-TOT-TEST$ make coverage-report
+make[1]: Entering directory '/home/user/Build/qemu-TOT-TEST/slirp'
+make[1]: Nothing to be done for 'all'.
+make[1]: Leaving directory '/home/user/Build/qemu-TOT-TEST/slirp'
+        CHK version_gen.h
+  GEN     coverage-report.html
+Traceback (most recent call last):
+  File "/usr/bin/gcovr", line 1970, in <module>
+    print_html_report(covdata, options.html_details)
+  File "/usr/bin/gcovr", line 1473, in print_html_report
+    INPUT = open(data['FILENAME'], 'r')
+IOError: [Errno 2] No such file or directory: 'wrap.inc.c'
+Makefile:1048: recipe for target 
+'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html' failed
+make: *** 
+[/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html] Error 1
+make: *** Deleting file 
+'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html'
+
+This instance is executed in QEMU 3.0 source tree: (so, it looks the problem 
+existed for quite some time)
+
+~/Build/qemu-3.0$ make coverage-report
+        CHK version_gen.h
+  GEN     coverage-report.html
+Traceback (most recent call last):
+  File "/usr/bin/gcovr", line 1970, in <module>
+    print_html_report(covdata, options.html_details)
+  File "/usr/bin/gcovr", line 1473, in print_html_report
+    INPUT = open(data['FILENAME'], 'r')
+IOError: [Errno 2] No such file or directory: 
+'/home/user/Build/qemu-3.0/target/openrisc/decode.inc.c'
+Makefile:992: recipe for target 
+'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html' failed
+make: *** [/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html] 
+Error 1
+make: *** Deleting file 
+'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html'
+
+Fond regards,
+Aleksandar
+
+
+>
+Alex Bennée
+
+>
+> #./configure --enable-gcov
+>
+> #make
+>
+> #make check
+>
+> #make coverage-report
+>
+>
+>
+> It seems that first three commands execute as expected. (For example,
+>
+> there are plenty of files generated by "make check" that would've not
+>
+> been generated if "enable-gcov" hadn't been chosen.) However, the
+>
+> last command complains about some missing files related to FP
+>
+So your failure mode is no report is generated at all? It's working for
+>
+me here.
+Another piece of info:
+
+~/Build/qemu-TOT-TEST$ gcov --version
+gcov (Ubuntu 5.5.0-12ubuntu1~16.04) 5.5.0 20171010
+Copyright (C) 2015 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.
+There is NO warranty; not even for MERCHANTABILITY or 
+FITNESS FOR A PARTICULAR PURPOSE.
+
+:~/Build/qemu-TOT-TEST$ gcc --version
+gcc (Ubuntu 7.2.0-1ubuntu1~16.04) 7.2.0
+Copyright (C) 2017 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+
+
+
+Alex, no report is generated for my test setups - in fact, "make 
+coverage-report" even says that it explicitly deletes what appears to be the 
+main coverage report html file).
+
+This is the terminal output of an unsuccessful executions of "make 
+coverage-report" for recent ToT:
+
+~/Build/qemu-TOT-TEST$ make coverage-report
+make[1]: Entering directory '/home/user/Build/qemu-TOT-TEST/slirp'
+make[1]: Nothing to be done for 'all'.
+make[1]: Leaving directory '/home/user/Build/qemu-TOT-TEST/slirp'
+        CHK version_gen.h
+  GEN     coverage-report.html
+Traceback (most recent call last):
+  File "/usr/bin/gcovr", line 1970, in <module>
+    print_html_report(covdata, options.html_details)
+  File "/usr/bin/gcovr", line 1473, in print_html_report
+    INPUT = open(data['FILENAME'], 'r')
+IOError: [Errno 2] No such file or directory: 'wrap.inc.c'
+Makefile:1048: recipe for target 
+'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html' failed
+make: *** 
+[/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html] Error 1
+make: *** Deleting file 
+'/home/user/Build/qemu-TOT-TEST/reports/coverage/coverage-report.html'
+
+This instance is executed in QEMU 3.0 source tree: (so, it looks the problem 
+existed for quite some time)
+
+~/Build/qemu-3.0$ make coverage-report
+        CHK version_gen.h
+  GEN     coverage-report.html
+Traceback (most recent call last):
+  File "/usr/bin/gcovr", line 1970, in <module>
+    print_html_report(covdata, options.html_details)
+  File "/usr/bin/gcovr", line 1473, in print_html_report
+    INPUT = open(data['FILENAME'], 'r')
+IOError: [Errno 2] No such file or directory: 
+'/home/user/Build/qemu-3.0/target/openrisc/decode.inc.c'
+Makefile:992: recipe for target 
+'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html' failed
+make: *** [/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html] 
+Error 1
+make: *** Deleting file 
+'/home/user/Build/qemu-3.0/reports/coverage/coverage-report.html'
+
+Fond regards,
+Aleksandar
+
+
+>
+Alex Bennée
+
+>
+> #./configure --enable-gcov
+>
+> #make
+>
+> #make check
+>
+> #make coverage-report
+>
+>
+>
+> It seems that first three commands execute as expected. (For example,
+>
+> there are plenty of files generated by "make check" that would've not
+>
+> been generated if "enable-gcov" hadn't been chosen.) However, the
+>
+> last command complains about some missing files related to FP
+>
+So your failure mode is no report is generated at all? It's working for
+>
+me here.
+Alex, here is the thing:
+
+Seeing that my gcovr is relatively old (2014) 3.2 version, I upgraded it from 
+git repo to the most recent 4.1 (actually, to a dev version, from the very tip 
+of the tree), and "make coverage-report" started generating coverage reports. 
+It did emit some error messages (totally different than previous), but still it 
+did not stop like it used to do with gcovr 3.2.
+
+Perhaps you would want to add some gcov/gcovr minimal version info in our docs. 
+(or at least a statement "this was tested with such and such gcc, gcov and 
+gcovr", etc.?)
+
+Coverage report looked fine at first glance, but it a kind of disappointed me 
+when I digged deeper into its content - for example, it shows very low coverage 
+for our FP code (softfloat), while, in fact, we know that "make check" contains 
+detailed tests on FP functionalities. But this is most likely a separate 
+problem of a very different nature, perhaps the issue of separate git repo for 
+FP tests (testfloat) that our FP tests use as a mid-layer.
+
+I'll try how everything works with my test examples, and will let you know.
+
+Your help is greatly appreciated,
+Aleksandar
+
+Fond regards,
+Aleksandar
+
+
+>
+Alex Bennée
+
+Aleksandar Markovic <address@hidden> writes:
+
+>
+>> #./configure --enable-gcov
+>
+>> #make
+>
+>> #make check
+>
+>> #make coverage-report
+>
+>>
+>
+>> It seems that first three commands execute as expected. (For example,
+>
+>> there are plenty of files generated by "make check" that would've not
+>
+>> been generated if "enable-gcov" hadn't been chosen.) However, the
+>
+>> last command complains about some missing files related to FP
+>
+>
+> So your failure mode is no report is generated at all? It's working for
+>
+> me here.
+>
+>
+Alex, here is the thing:
+>
+>
+Seeing that my gcovr is relatively old (2014) 3.2 version, I upgraded it from
+>
+git repo to the most recent 4.1 (actually, to a dev version, from the very
+>
+tip of the tree), and "make coverage-report" started generating coverage
+>
+reports. It did emit some error messages (totally different than previous),
+>
+but still it did not stop like it used to do with gcovr 3.2.
+>
+>
+Perhaps you would want to add some gcov/gcovr minimal version info in our
+>
+docs. (or at least a statement "this was tested with such and such gcc, gcov
+>
+and gcovr", etc.?)
+>
+>
+Coverage report looked fine at first glance, but it a kind of
+>
+disappointed me when I digged deeper into its content - for example,
+>
+it shows very low coverage for our FP code (softfloat), while, in
+>
+fact, we know that "make check" contains detailed tests on FP
+>
+functionalities. But this is most likely a separate problem of a very
+>
+different nature, perhaps the issue of separate git repo for FP tests
+>
+(testfloat) that our FP tests use as a mid-layer.
+I get:
+
+68.6 %  2593 / 3782     62.2 %  1690 / 2718
+
+Which is not bad considering we don't exercise the 80 and 128 bit
+softfloat code at all (which is not shared by the re-factored 16/32/64
+bit code).
+
+>
+>
+I'll try how everything works with my test examples, and will let you know.
+>
+>
+Your help is greatly appreciated,
+>
+Aleksandar
+>
+>
+Fond regards,
+>
+Aleksandar
+>
+>
+>
+> Alex Bennée
+--
+Alex Bennée
+
+>
+> it shows very low coverage for our FP code (softfloat), while, in
+>
+> fact, we know that "make check" contains detailed tests on FP
+>
+> functionalities. But this is most likely a separate problem of a very
+>
+> different nature, perhaps the issue of separate git repo for FP tests
+>
+> (testfloat) that our FP tests use as a mid-layer.
+>
+>
+I get:
+>
+>
+68.6 %  2593 / 3782     62.2 %  1690 / 2718
+>
+I would expect that kind of result too.
+
+However, I get:
+
+File:   fpu/softfloat.c                 Lines:  8       3334    0.2 %
+Date:   2019-08-05 19:56:58             Branches:       3       2376    0.1 %
+
+:(
+
+OK, I'll try to figure that out, and most likely I could live with it if it is 
+an isolated problem.
+
+Thank you for your assistance in this matter,
+Aleksandar
+
+>
+Which is not bad considering we don't exercise the 80 and 128 bit
+>
+softfloat code at all (which is not shared by the re-factored 16/32/64
+>
+bit code).
+>
+>
+Alex Bennée
+
+>
+> it shows very low coverage for our FP code (softfloat), while, in
+>
+> fact, we know that "make check" contains detailed tests on FP
+>
+> functionalities. But this is most likely a separate problem of a very
+>
+> different nature, perhaps the issue of separate git repo for FP tests
+>
+> (testfloat) that our FP tests use as a mid-layer.
+>
+>
+I get:
+>
+>
+68.6 %  2593 / 3782     62.2 %  1690 / 2718
+>
+This problem is solved too. (and it is my fault)
+
+I worked with multiple versions of QEMU, and my previous low-coverage results 
+were for QEMU 3.0, and for that version the directory tests/fp did not even 
+exist. :D (<blush>)
+
+For QEMU ToT, I get now:
+
+fpu/softfloat.c         
+        68.8 %  2592 / 3770     62.3 %  1693 / 2718
+
+which is identical for all intents and purposes to your result.
+
+Yours cordially,
+Aleksandar
+
diff --git a/results/classifier/zero-shot/010/review/50773216 b/results/classifier/zero-shot/010/review/50773216
new file mode 100644
index 00000000..70036114
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/50773216
@@ -0,0 +1,134 @@
+permissions: 0.813
+device: 0.764
+other: 0.737
+graphic: 0.723
+semantic: 0.669
+files: 0.666
+debug: 0.659
+vnc: 0.656
+socket: 0.652
+boot: 0.637
+PID: 0.636
+performance: 0.628
+network: 0.606
+KVM: 0.601
+debug: 0.366
+vnc: 0.116
+files: 0.082
+PID: 0.068
+other: 0.055
+network: 0.041
+performance: 0.039
+semantic: 0.031
+socket: 0.027
+device: 0.018
+boot: 0.017
+permissions: 0.007
+graphic: 0.003
+KVM: 0.002
+
+[Qemu-devel] Can I have someone's feedback on [bug 1809075] Concurrency bug on keyboard events: capslock LED messing up keycode streams causes character misses at guest kernel
+
+Hi everyone.
+Can I please have someone's feedback on this bug?
+https://bugs.launchpad.net/qemu/+bug/1809075
+Briefly, guest OS loses characters sent to it via vnc. And I spot the
+bug in relation to ps2 driver.
+I'm thinking of possible fixes and I might want to use a memory barrier.
+But I would really like to have some suggestion from a qemu developer
+first. For example, can we brutally drop capslock LED key events in ps2
+queue?
+It is actually relevant to openQA, an automated QA tool for openSUSE.
+And this bug blocks a few test cases for us.
+Thank you in advance!
+
+Kind regards,
+Gao Zhiyuan
+
+Cc'ing Marc-André & Gerd.
+
+On 12/19/18 10:31 AM, Gao Zhiyuan wrote:
+>
+Hi everyone.
+>
+>
+Can I please have someone's feedback on this bug?
+>
+https://bugs.launchpad.net/qemu/+bug/1809075
+>
+Briefly, guest OS loses characters sent to it via vnc. And I spot the
+>
+bug in relation to ps2 driver.
+>
+>
+I'm thinking of possible fixes and I might want to use a memory barrier.
+>
+But I would really like to have some suggestion from a qemu developer
+>
+first. For example, can we brutally drop capslock LED key events in ps2
+>
+queue?
+>
+>
+It is actually relevant to openQA, an automated QA tool for openSUSE.
+>
+And this bug blocks a few test cases for us.
+>
+>
+Thank you in advance!
+>
+>
+Kind regards,
+>
+Gao Zhiyuan
+>
+
+On Thu, Jan 03, 2019 at 12:05:54PM +0100, Philippe Mathieu-Daudé wrote:
+>
+Cc'ing Marc-André & Gerd.
+>
+>
+On 12/19/18 10:31 AM, Gao Zhiyuan wrote:
+>
+> Hi everyone.
+>
+>
+>
+> Can I please have someone's feedback on this bug?
+>
+>
+https://bugs.launchpad.net/qemu/+bug/1809075
+>
+> Briefly, guest OS loses characters sent to it via vnc. And I spot the
+>
+> bug in relation to ps2 driver.
+>
+>
+>
+> I'm thinking of possible fixes and I might want to use a memory barrier.
+>
+> But I would really like to have some suggestion from a qemu developer
+>
+> first. For example, can we brutally drop capslock LED key events in ps2
+>
+> queue?
+There is no "capslock LED key event".  0xfa is KBD_REPLY_ACK, and the
+device queues it in response to guest port writes.  Yes, the ack can
+race with actual key events.  But IMO that isn't a bug in qemu.
+
+Probably the linux kernel just throws away everything until it got the
+ack for the port write, and that way the key event gets lost.  On
+physical hardware you will not notice because it is next to impossible
+to type fast enough to hit the race window.
+
+So, go fix the kernel.
+
+Alternatively fix vncdotool to send uppercase letters properly with
+shift key pressed.  Then qemu wouldn't generate capslock key events
+(that happens because qemu thinks guest and host capslock state is out
+of sync) and the guests's capslock led update request wouldn't get into
+the way.
+
+cheers,
+  Gerd
+
diff --git a/results/classifier/zero-shot/010/review/51610399 b/results/classifier/zero-shot/010/review/51610399
new file mode 100644
index 00000000..ff94a69d
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/51610399
@@ -0,0 +1,332 @@
+permissions: 0.988
+debug: 0.986
+boot: 0.986
+graphic: 0.986
+other: 0.985
+semantic: 0.984
+device: 0.984
+performance: 0.983
+files: 0.981
+PID: 0.978
+socket: 0.978
+KVM: 0.975
+vnc: 0.974
+network: 0.973
+boot: 0.964
+KVM: 0.904
+debug: 0.468
+PID: 0.089
+device: 0.058
+socket: 0.048
+files: 0.031
+performance: 0.010
+semantic: 0.007
+other: 0.007
+network: 0.004
+graphic: 0.002
+permissions: 0.002
+vnc: 0.001
+
+[BUG][powerpc] KVM Guest Boot Failure – Hangs at "Booting Linux via __start()”
+
+Bug Description:
+Encountering a boot failure when launching a KVM guest with
+qemu-system-ppc64. The guest hangs at boot, and the QEMU monitor
+crashes.
+Reproduction Steps:
+# qemu-system-ppc64 --version
+QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
+Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
+# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
+pseries,accel=kvm \
+-m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
+  -device virtio-scsi-pci,id=scsi \
+-drive
+file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
+\
+-device scsi-hd,drive=drive0,bus=scsi.0 \
+  -netdev bridge,id=net0,br=virbr0 \
+  -device virtio-net-pci,netdev=net0 \
+  -serial pty \
+  -device virtio-balloon-pci \
+  -cpu host
+QEMU 9.2.50 monitor - type 'help' for more information
+char device redirected to /dev/pts/2 (label serial0)
+(qemu)
+(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
+unavailable: IRQ_XIVE capability must be present for KVM
+Falling back to kernel-irqchip=off
+** Qemu Hang
+
+(In another ssh session)
+# screen /dev/pts/2
+Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
+(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
+(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
+15:20:17 UTC 2024
+Detected machine type: 0000000000000101
+command line:
+BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
+root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
+Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
+Calling ibm,client-architecture-support... done
+memory layout at init:
+  memory_limit : 0000000000000000 (16 MB aligned)
+  alloc_bottom : 0000000008200000
+  alloc_top    : 0000000030000000
+  alloc_top_hi : 0000000800000000
+  rmo_top      : 0000000030000000
+  ram_top      : 0000000800000000
+instantiating rtas at 0x000000002fff0000... done
+prom_hold_cpus: skipped
+copying OF device tree...
+Building dt strings...
+Building dt structure...
+Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
+Device tree struct  0x0000000008220000 -> 0x0000000008230000
+Quiescing Open Firmware ...
+Booting Linux via __start() @ 0x0000000000440000 ...
+** Guest Console Hang
+
+
+Git Bisect:
+Performing git bisect points to the following patch:
+# git bisect bad
+e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
+commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
+Author: Nicholas Piggin <npiggin@gmail.com>
+Date:   Thu Dec 19 13:40:31 2024 +1000
+
+    target/ppc: fix timebase register reset state
+(H)DEC and PURR get reset before icount does, which causes them to
+be
+skewed and not match the init state. This can cause replay to not
+match the recorded trace exactly. For DEC and HDEC this is usually
+not
+noticable since they tend to get programmed before affecting the
+    target machine. PURR has been observed to cause replay bugs when
+    running Linux.
+
+    Fix this by resetting using a time of 0.
+
+    Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
+    Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
+
+ hw/ppc/ppc.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+
+Reverting the patch helps boot the guest.
+Thanks,
+Misbah Anjum N
+
+Thanks for the report.
+
+Tricky problem. A secondary CPU is hanging before it is started by the
+primary via rtas call.
+
+That secondary keeps calling kvm_cpu_exec(), which keeps exiting out
+early with EXCP_HLT because kvm_arch_process_async_events() returns
+true because that cpu has ->halted=1. That just goes around he run
+loop because there is an interrupt pending (DEC).
+
+So it never runs. It also never releases the BQL, and another CPU,
+the primary which is actually supposed to be running, is stuck in
+spapr_set_all_lpcrs() in run_on_cpu() waiting for the BQL.
+
+This patch just exposes the bug I think, by causing the interrupt.
+although I'm not quite sure why it's okay previously (-ve decrementer
+values should be causing a timer exception too). The timer exception
+should not be taken as an interrupt by those secondary CPUs, and it
+doesn't because it is masked, until set_all_lpcrs sets an LPCR value
+that enables powersave wakeup on decrementer interrupt.
+
+The start_powered_off sate just sets ->halted, which makes it look
+like a powersaving state. Logically I think it's not the same thing
+as far as spapr goes. I don't know why start_powered_off only sets
+->halted, and not ->stop/stopped as well.
+
+Not sure how best to solve it cleanly. I'll send a revert if I can't
+get something working soon.
+
+Thanks,
+Nick
+
+On Tue Mar 18, 2025 at 7:09 AM AEST, misanjum wrote:
+>
+Bug Description:
+>
+Encountering a boot failure when launching a KVM guest with
+>
+qemu-system-ppc64. The guest hangs at boot, and the QEMU monitor
+>
+crashes.
+>
+>
+>
+Reproduction Steps:
+>
+# qemu-system-ppc64 --version
+>
+QEMU emulator version 9.2.50 (v9.2.0-2799-g0462a32b4f)
+>
+Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers
+>
+>
+# /usr/bin/qemu-system-ppc64 -name avocado-vt-vm1 -machine
+>
+pseries,accel=kvm \
+>
+-m 32768 -smp 32,sockets=1,cores=32,threads=1 -nographic \
+>
+-device virtio-scsi-pci,id=scsi \
+>
+-drive
+>
+file=/home/kvmci/tests/data/avocado-vt/images/rhel8.0devel-ppc64le.qcow2,if=none,id=drive0,format=qcow2
+>
+>
+\
+>
+-device scsi-hd,drive=drive0,bus=scsi.0 \
+>
+-netdev bridge,id=net0,br=virbr0 \
+>
+-device virtio-net-pci,netdev=net0 \
+>
+-serial pty \
+>
+-device virtio-balloon-pci \
+>
+-cpu host
+>
+QEMU 9.2.50 monitor - type 'help' for more information
+>
+char device redirected to /dev/pts/2 (label serial0)
+>
+(qemu)
+>
+(qemu) qemu-system-ppc64: warning: kernel_irqchip allowed but
+>
+unavailable: IRQ_XIVE capability must be present for KVM
+>
+Falling back to kernel-irqchip=off
+>
+** Qemu Hang
+>
+>
+(In another ssh session)
+>
+# screen /dev/pts/2
+>
+Preparing to boot Linux version 6.10.4-200.fc40.ppc64le
+>
+(mockbuild@c23cc4e677614c34bb22d54eeea4dc1f) (gcc (GCC) 14.2.1 20240801
+>
+(Red Hat 14.2.1-1), GNU ld version 2.41-37.fc40) #1 SMP Sun Aug 11
+>
+15:20:17 UTC 2024
+>
+Detected machine type: 0000000000000101
+>
+command line:
+>
+BOOT_IMAGE=(ieee1275/disk,msdos2)/vmlinuz-6.10.4-200.fc40.ppc64le
+>
+root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root crashkernel=1024M
+>
+Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
+>
+Calling ibm,client-architecture-support... done
+>
+memory layout at init:
+>
+memory_limit : 0000000000000000 (16 MB aligned)
+>
+alloc_bottom : 0000000008200000
+>
+alloc_top    : 0000000030000000
+>
+alloc_top_hi : 0000000800000000
+>
+rmo_top      : 0000000030000000
+>
+ram_top      : 0000000800000000
+>
+instantiating rtas at 0x000000002fff0000... done
+>
+prom_hold_cpus: skipped
+>
+copying OF device tree...
+>
+Building dt strings...
+>
+Building dt structure...
+>
+Device tree strings 0x0000000008210000 -> 0x0000000008210bd0
+>
+Device tree struct  0x0000000008220000 -> 0x0000000008230000
+>
+Quiescing Open Firmware ...
+>
+Booting Linux via __start() @ 0x0000000000440000 ...
+>
+** Guest Console Hang
+>
+>
+>
+Git Bisect:
+>
+Performing git bisect points to the following patch:
+>
+# git bisect bad
+>
+e8291ec16da80566c121c68d9112be458954d90b is the first bad commit
+>
+commit e8291ec16da80566c121c68d9112be458954d90b (HEAD)
+>
+Author: Nicholas Piggin <npiggin@gmail.com>
+>
+Date:   Thu Dec 19 13:40:31 2024 +1000
+>
+>
+target/ppc: fix timebase register reset state
+>
+>
+(H)DEC and PURR get reset before icount does, which causes them to
+>
+be
+>
+skewed and not match the init state. This can cause replay to not
+>
+match the recorded trace exactly. For DEC and HDEC this is usually
+>
+not
+>
+noticable since they tend to get programmed before affecting the
+>
+target machine. PURR has been observed to cause replay bugs when
+>
+running Linux.
+>
+>
+Fix this by resetting using a time of 0.
+>
+>
+Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
+>
+Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
+>
+>
+hw/ppc/ppc.c | 11 ++++++++---
+>
+1 file changed, 8 insertions(+), 3 deletions(-)
+>
+>
+>
+Reverting the patch helps boot the guest.
+>
+Thanks,
+>
+Misbah Anjum N
+
diff --git a/results/classifier/zero-shot/010/review/53568181 b/results/classifier/zero-shot/010/review/53568181
new file mode 100644
index 00000000..56a38e62
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/53568181
@@ -0,0 +1,102 @@
+debug: 0.968
+permissions: 0.965
+performance: 0.948
+semantic: 0.943
+graphic: 0.940
+PID: 0.938
+device: 0.936
+vnc: 0.935
+network: 0.925
+other: 0.921
+KVM: 0.917
+files: 0.890
+boot: 0.876
+socket: 0.875
+performance: 0.800
+KVM: 0.696
+debug: 0.238
+device: 0.097
+other: 0.059
+graphic: 0.058
+files: 0.018
+semantic: 0.006
+PID: 0.005
+socket: 0.004
+network: 0.003
+permissions: 0.002
+boot: 0.002
+vnc: 0.001
+
+[BUG] x86/PAT handling severely crippled AMD-V SVM KVM performance
+
+Hi, I maintain an out-of-tree 3D APIs pass-through QEMU device models at
+https://github.com/kjliew/qemu-3dfx
+that provide 3D acceleration for legacy
+32-bit Windows guests (Win98SE, WinME, Win2k and WinXP) with the focus on
+playing old legacy games from 1996-2003. It currently supports the now-defunct
+3Dfx propriety API called Glide and an alternative OpenGL pass-through based on
+MESA implementation.
+
+The basic concept of both implementations create memory-mapped virtual
+interfaces consist of host/guest shared memory with guest-push model instead of
+a more common host-pull model for typical QEMU device model implementation.
+Guest uses shared memory as FIFOs for drawing commands and data to bulk up the
+operations until serialization event that flushes the FIFOs into host. This
+achieves extremely good performance since virtual CPUs are fast with hardware
+acceleration (Intel VT/AMD-V) and reduces the overhead of frequent VMEXITs to
+service the device emulation. Both implementations work on Windows 10 with WHPX
+and HAXM accelerators as well as KVM in Linux.
+
+On Windows 10, QEMU WHPX implementation does not sync MSR_IA32_PAT during
+host/guest states sync. There is no visibility into the closed-source WHPX on
+how things are managed behind the scene, but from measuring performance figures
+I can conclude that it didn't handle the MSR_IA32_PAT correctly for both Intel
+and AMD. Call this fair enough, if you will, it didn't flag any concerns, in
+fact games such as Quake2 and Quake3 were still within playable frame rate of
+40~60FPS on Win2k/XP guest. Until the same games were run on Win98/ME guest and
+the frame rate blew off the roof (300~500FPS) on the same CPU and GPU. In fact,
+the later seemed to be more inlined with runnng the games bare-metal with vsync
+off.
+
+On Linux (at the time of writing kernel 5.6.7/Mesa 20.0), the difference
+prevailed. Intel CPUs (and it so happened that I was on laptop with Intel GPU),
+the VMX-based kvm_intel got it right while SVM-based kvm_amd did not.
+To put this in simple exaggeration, an aging Core i3-4010U/HD Graphics 4400
+(Haswell GT2) exhibited an insane performance in Quake2/Quake3 timedemos that
+totally crushed more recent AMD Ryzen 2500U APU/Vega 8 Graphics and AMD
+FX8300/NVIDIA GT730 on desktop. Simply unbelievable!
+
+It turned out that there was something to do with AMD-V NPT. By loading kvm_amd
+with npt=0, AMD Ryzen APU and FX8300 regained a huge performance leap. However,
+AMD NPT issue with KVM was supposedly fixed in 2017 kernel commits. NPT=0 would
+actually incur performance loss for VM due to intervention required by
+hypervisors to maintain the shadow page tables.  Finally, I was able to find the
+pointer that pointed to MSR_IA32_PAT register. By updating the MSR_IA32_PAT to
+0x0606xxxx0606xxxxULL, AMD CPUs now regain their rightful performance without
+taking the hit of NPT=0 for Linux KVM. Taking the same solution into Windows,
+both Intel and AMD CPUs no longer require Win98/ME guest to unleash the full
+performance potentials and performance figures based on games measured on WHPX
+were not very far behind Linux KVM.
+
+So I guess the problem lies in host/guest shared memory regions mapped as
+uncacheable from virtual CPU perspective. As virtual CPUs now completely execute
+in hardware context with x86 hardware virtualiztion extensions, the cacheability
+of memory types would severely impact the performance on guests. WHPX didn't
+handle it for both Intel EPT and AMD NPT, but KVM seems to do it right for Intel
+EPT. I don't have the correct fix for QEMU. But what I can do for my 3D APIs
+pass-through device models is to implement host-side hooks to reprogram and
+restore MSR_IA32_PAT upon activation/deactivation of the 3D APIs. Perhaps there
+is also a better solution of having the proper kernel drivers for virtual
+interfaces to manage the memory types of host/guest shared memory in kernel
+space, but to do that and the needs of Microsoft tools/DDKs, I will just forget
+it. The guest stubs uses the same kernel drivers included in 3Dfx drivers for
+memory mapping and the virtual interfaces remain driver-less from Windows OS
+perspective. Considering the current state of halting progress for QEMU native
+virgil3D to support Windows OS, I am just being pragmatic. I understand that
+QEMU virgil3D will eventually bring 3D acceleration for Windows guests, but I do
+not expect anything to support legacy 32-bit Windows OSes which have out-grown
+their commercial usefulness.
+
+Regards,
+KJ Liew
+
diff --git a/results/classifier/zero-shot/010/review/55247116 b/results/classifier/zero-shot/010/review/55247116
new file mode 100644
index 00000000..a1711adc
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/55247116
@@ -0,0 +1,1334 @@
+permissions: 0.946
+other: 0.945
+debug: 0.941
+performance: 0.938
+graphic: 0.933
+PID: 0.929
+socket: 0.929
+semantic: 0.928
+device: 0.919
+boot: 0.918
+network: 0.916
+vnc: 0.916
+files: 0.912
+KVM: 0.894
+debug: 0.906
+network: 0.086
+other: 0.080
+files: 0.067
+performance: 0.064
+PID: 0.031
+socket: 0.017
+semantic: 0.016
+boot: 0.015
+device: 0.011
+KVM: 0.010
+permissions: 0.009
+vnc: 0.009
+graphic: 0.003
+
+[Qemu-devel]  [RFC/BUG] xen-mapcache: buggy invalidate map cache?
+
+Hi,
+
+In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+instead of first level entry (if map to rom other than guest memory
+comes first), while in xen_invalidate_map_cache(), when VM ballooned
+out memory, qemu did not invalidate cache entries in linked
+list(entry->next), so when VM balloon back in memory, gfns probably
+mapped to different mfns, thus if guest asks device to DMA to these
+GPA, qemu may DMA to stale MFNs.
+
+So I think in xen_invalidate_map_cache() linked lists should also be
+checked and invalidated.
+
+What’s your opinion? Is this a bug? Is my analyze correct?
+
+On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+Hi,
+>
+>
+In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+instead of first level entry (if map to rom other than guest memory
+>
+comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+out memory, qemu did not invalidate cache entries in linked
+>
+list(entry->next), so when VM balloon back in memory, gfns probably
+>
+mapped to different mfns, thus if guest asks device to DMA to these
+>
+GPA, qemu may DMA to stale MFNs.
+>
+>
+So I think in xen_invalidate_map_cache() linked lists should also be
+>
+checked and invalidated.
+>
+>
+What’s your opinion? Is this a bug? Is my analyze correct?
+Added Jun Nakajima and Alexander Graf
+
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> Hi,
+>
+>
+>
+> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+> instead of first level entry (if map to rom other than guest memory
+>
+> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+> out memory, qemu did not invalidate cache entries in linked
+>
+> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+> mapped to different mfns, thus if guest asks device to DMA to these
+>
+> GPA, qemu may DMA to stale MFNs.
+>
+>
+>
+> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+> checked and invalidated.
+>
+>
+>
+> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+>
+Added Jun Nakajima and Alexander Graf
+And correct Stefano Stabellini's email address.
+
+On Mon, 10 Apr 2017 00:36:02 +0800
+hrg <address@hidden> wrote:
+
+Hi,
+
+>
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+>> Hi,
+>
+>>
+>
+>> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+>> instead of first level entry (if map to rom other than guest memory
+>
+>> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+>> out memory, qemu did not invalidate cache entries in linked
+>
+>> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+>> mapped to different mfns, thus if guest asks device to DMA to these
+>
+>> GPA, qemu may DMA to stale MFNs.
+>
+>>
+>
+>> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+>> checked and invalidated.
+>
+>>
+>
+>> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+>
+>
+> Added Jun Nakajima and Alexander Graf
+>
+And correct Stefano Stabellini's email address.
+There is a real issue with the xen-mapcache corruption in fact. I encountered
+it a few months ago while experimenting with Q35 support on Xen. Q35 emulation
+uses an AHCI controller by default, along with NCQ mode enabled. The issue can
+be (somewhat) easily reproduced there, though using a normal i440 emulation
+might possibly allow to reproduce the issue as well, using a dedicated test
+code from a guest side. In case of Q35+NCQ the issue can be reproduced "as is".
+
+The issue occurs when a guest domain performs an intensive disk I/O, ex. while
+guest OS booting. QEMU crashes with "Bad ram offset 980aa000"
+message logged, where the address is different each time. The hard thing with
+this issue is that it has a very low reproducibility rate.
+
+The corruption happens when there are multiple I/O commands in the NCQ queue.
+So there are overlapping emulated DMA operations in flight and QEMU uses a
+sequence of mapcache actions which can be executed in the "wrong" order thus
+leading to an inconsistent xen-mapcache - so a bad address from the wrong
+entry is returned.
+
+The bad thing with this issue is that QEMU crash due to "Bad ram offset"
+appearance is a relatively good situation in the sense that this is a caught
+error. But there might be a much worse (artificial) situation where the returned
+address looks valid but points to a different mapped memory.
+
+The fix itself is not hard (ex. an additional checked field in MapCacheEntry),
+but there is a need of some reliable way to test it considering the low
+reproducibility rate.
+
+Regards,
+Alex
+
+On Mon, 10 Apr 2017, hrg wrote:
+>
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+>> Hi,
+>
+>>
+>
+>> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+>> instead of first level entry (if map to rom other than guest memory
+>
+>> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+>> out memory, qemu did not invalidate cache entries in linked
+>
+>> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+>> mapped to different mfns, thus if guest asks device to DMA to these
+>
+>> GPA, qemu may DMA to stale MFNs.
+>
+>>
+>
+>> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+>> checked and invalidated.
+>
+>>
+>
+>> What’s your opinion? Is this a bug? Is my analyze correct?
+Yes, you are right. We need to go through the list for each element of
+the array in xen_invalidate_map_cache. Can you come up with a patch?
+
+On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+On Mon, 10 Apr 2017, hrg wrote:
+>
+> On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> >> Hi,
+>
+> >>
+>
+> >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+> >> instead of first level entry (if map to rom other than guest memory
+>
+> >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+> >> out memory, qemu did not invalidate cache entries in linked
+>
+> >> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+> >> mapped to different mfns, thus if guest asks device to DMA to these
+>
+> >> GPA, qemu may DMA to stale MFNs.
+>
+> >>
+>
+> >> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+> >> checked and invalidated.
+>
+> >>
+>
+> >> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+>
+Yes, you are right. We need to go through the list for each element of
+>
+the array in xen_invalidate_map_cache. Can you come up with a patch?
+I spoke too soon. In the regular case there should be no locked mappings
+when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+beginning of the functions). Without locked mappings, there should never
+be more than one element in each list (see xen_map_cache_unlocked:
+entry->lock == true is a necessary condition to append a new entry to
+the list, otherwise it is just remapped).
+
+Can you confirm that what you are seeing are locked mappings
+when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+by turning it into a printf or by defininig MAPCACHE_DEBUG.
+
+On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+<address@hidden> wrote:
+>
+On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+> On Mon, 10 Apr 2017, hrg wrote:
+>
+> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> > >> Hi,
+>
+> > >>
+>
+> > >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+> > >> instead of first level entry (if map to rom other than guest memory
+>
+> > >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+> > >> out memory, qemu did not invalidate cache entries in linked
+>
+> > >> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+> > >> mapped to different mfns, thus if guest asks device to DMA to these
+>
+> > >> GPA, qemu may DMA to stale MFNs.
+>
+> > >>
+>
+> > >> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+> > >> checked and invalidated.
+>
+> > >>
+>
+> > >> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+>
+>
+> Yes, you are right. We need to go through the list for each element of
+>
+> the array in xen_invalidate_map_cache. Can you come up with a patch?
+>
+>
+I spoke too soon. In the regular case there should be no locked mappings
+>
+when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+>
+beginning of the functions). Without locked mappings, there should never
+>
+be more than one element in each list (see xen_map_cache_unlocked:
+>
+entry->lock == true is a necessary condition to append a new entry to
+>
+the list, otherwise it is just remapped).
+>
+>
+Can you confirm that what you are seeing are locked mappings
+>
+when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+>
+by turning it into a printf or by defininig MAPCACHE_DEBUG.
+In fact, I think the DPRINTF above is incorrect too. In
+pci_add_option_rom(), rtl8139 rom is locked mapped in
+pci_add_option_rom->memory_region_get_ram_ptr (after
+memory_region_init_ram). So actually I think we should remove the
+DPRINTF warning as it is normal.
+
+On Tue, 11 Apr 2017, hrg wrote:
+>
+On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+>
+<address@hidden> wrote:
+>
+> On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+>> On Mon, 10 Apr 2017, hrg wrote:
+>
+>> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+>> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+>> > >> Hi,
+>
+>> > >>
+>
+>> > >> In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+>
+>> > >> instead of first level entry (if map to rom other than guest memory
+>
+>> > >> comes first), while in xen_invalidate_map_cache(), when VM ballooned
+>
+>> > >> out memory, qemu did not invalidate cache entries in linked
+>
+>> > >> list(entry->next), so when VM balloon back in memory, gfns probably
+>
+>> > >> mapped to different mfns, thus if guest asks device to DMA to these
+>
+>> > >> GPA, qemu may DMA to stale MFNs.
+>
+>> > >>
+>
+>> > >> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+>> > >> checked and invalidated.
+>
+>> > >>
+>
+>> > >> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+>>
+>
+>> Yes, you are right. We need to go through the list for each element of
+>
+>> the array in xen_invalidate_map_cache. Can you come up with a patch?
+>
+>
+>
+> I spoke too soon. In the regular case there should be no locked mappings
+>
+> when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+>
+> beginning of the functions). Without locked mappings, there should never
+>
+> be more than one element in each list (see xen_map_cache_unlocked:
+>
+> entry->lock == true is a necessary condition to append a new entry to
+>
+> the list, otherwise it is just remapped).
+>
+>
+>
+> Can you confirm that what you are seeing are locked mappings
+>
+> when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+>
+> by turning it into a printf or by defininig MAPCACHE_DEBUG.
+>
+>
+In fact, I think the DPRINTF above is incorrect too. In
+>
+pci_add_option_rom(), rtl8139 rom is locked mapped in
+>
+pci_add_option_rom->memory_region_get_ram_ptr (after
+>
+memory_region_init_ram). So actually I think we should remove the
+>
+DPRINTF warning as it is normal.
+Let me explain why the DPRINTF warning is there: emulated dma operations
+can involve locked mappings. Once a dma operation completes, the related
+mapping is unlocked and can be safely destroyed. But if we destroy a
+locked mapping in xen_invalidate_map_cache, while a dma is still
+ongoing, QEMU will crash. We cannot handle that case.
+
+However, the scenario you described is different. It has nothing to do
+with DMA. It looks like pci_add_option_rom calls
+memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+locked mapping and it is never unlocked or destroyed.
+
+It looks like "ptr" is not used after pci_add_option_rom returns. Does
+the append patch fix the problem you are seeing? For the proper fix, I
+think we probably need some sort of memory_region_unmap wrapper or maybe
+a call to address_space_unmap.
+
+
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+index e6b08e1..04f98b7 100644
+--- a/hw/pci/pci.c
++++ b/hw/pci/pci.c
+@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool 
+is_default_rom,
+     }
+ 
+     pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
++    xen_invalidate_map_cache_entry(ptr);
+ }
+ 
+ static void pci_del_option_rom(PCIDevice *pdev)
+
+On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
+Stefano Stabellini <address@hidden> wrote:
+
+>
+On Tue, 11 Apr 2017, hrg wrote:
+>
+> On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+>
+> <address@hidden> wrote:
+>
+> > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+> >> On Mon, 10 Apr 2017, hrg wrote:
+>
+> >> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> >> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> >> > >> Hi,
+>
+> >> > >>
+>
+> >> > >> In xen_map_cache_unlocked(), map to guest memory maybe in
+>
+> >> > >> entry->next instead of first level entry (if map to rom other than
+>
+> >> > >> guest memory comes first), while in xen_invalidate_map_cache(),
+>
+> >> > >> when VM ballooned out memory, qemu did not invalidate cache entries
+>
+> >> > >> in linked list(entry->next), so when VM balloon back in memory,
+>
+> >> > >> gfns probably mapped to different mfns, thus if guest asks device
+>
+> >> > >> to DMA to these GPA, qemu may DMA to stale MFNs.
+>
+> >> > >>
+>
+> >> > >> So I think in xen_invalidate_map_cache() linked lists should also be
+>
+> >> > >> checked and invalidated.
+>
+> >> > >>
+>
+> >> > >> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+> >>
+>
+> >> Yes, you are right. We need to go through the list for each element of
+>
+> >> the array in xen_invalidate_map_cache. Can you come up with a patch?
+>
+> >
+>
+> > I spoke too soon. In the regular case there should be no locked mappings
+>
+> > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+>
+> > beginning of the functions). Without locked mappings, there should never
+>
+> > be more than one element in each list (see xen_map_cache_unlocked:
+>
+> > entry->lock == true is a necessary condition to append a new entry to
+>
+> > the list, otherwise it is just remapped).
+>
+> >
+>
+> > Can you confirm that what you are seeing are locked mappings
+>
+> > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+>
+> > by turning it into a printf or by defininig MAPCACHE_DEBUG.
+>
+>
+>
+> In fact, I think the DPRINTF above is incorrect too. In
+>
+> pci_add_option_rom(), rtl8139 rom is locked mapped in
+>
+> pci_add_option_rom->memory_region_get_ram_ptr (after
+>
+> memory_region_init_ram). So actually I think we should remove the
+>
+> DPRINTF warning as it is normal.
+>
+>
+Let me explain why the DPRINTF warning is there: emulated dma operations
+>
+can involve locked mappings. Once a dma operation completes, the related
+>
+mapping is unlocked and can be safely destroyed. But if we destroy a
+>
+locked mapping in xen_invalidate_map_cache, while a dma is still
+>
+ongoing, QEMU will crash. We cannot handle that case.
+>
+>
+However, the scenario you described is different. It has nothing to do
+>
+with DMA. It looks like pci_add_option_rom calls
+>
+memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+>
+locked mapping and it is never unlocked or destroyed.
+>
+>
+It looks like "ptr" is not used after pci_add_option_rom returns. Does
+>
+the append patch fix the problem you are seeing? For the proper fix, I
+>
+think we probably need some sort of memory_region_unmap wrapper or maybe
+>
+a call to address_space_unmap.
+Hmm, for some reason my message to the Xen-devel list got rejected but was sent
+to Qemu-devel instead, without any notice. Sorry if I'm missing something
+obvious as a list newbie.
+
+Stefano, hrg,
+
+There is an issue with inconsistency between the list of normal MapCacheEntry's
+and their 'reverse' counterparts - MapCacheRev's in locked_entries.
+When bad situation happens, there are multiple (locked) MapCacheEntry
+entries in the bucket's linked list along with a number of MapCacheRev's. And
+when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
+first list and calculates a wrong pointer from it which may then be caught with
+the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
+this issue as well I think.
+
+I'll try to provide a test code which can reproduce the issue from the
+guest side using an emulated IDE controller, though it's much simpler to achieve
+this result with an AHCI controller using multiple NCQ I/O commands. So far I've
+seen this issue only with Windows 7 (and above) guest on AHCI, but any block I/O
+DMA should be enough I think.
+
+On 2017/4/12 14:17, Alexey G wrote:
+On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
+Stefano Stabellini <address@hidden> wrote:
+On Tue, 11 Apr 2017, hrg wrote:
+On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+<address@hidden> wrote:
+On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+On Mon, 10 Apr 2017, hrg wrote:
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+Hi,
+
+In xen_map_cache_unlocked(), map to guest memory maybe in
+entry->next instead of first level entry (if map to rom other than
+guest memory comes first), while in xen_invalidate_map_cache(),
+when VM ballooned out memory, qemu did not invalidate cache entries
+in linked list(entry->next), so when VM balloon back in memory,
+gfns probably mapped to different mfns, thus if guest asks device
+to DMA to these GPA, qemu may DMA to stale MFNs.
+
+So I think in xen_invalidate_map_cache() linked lists should also be
+checked and invalidated.
+
+What’s your opinion? Is this a bug? Is my analyze correct?
+Yes, you are right. We need to go through the list for each element of
+the array in xen_invalidate_map_cache. Can you come up with a patch?
+I spoke too soon. In the regular case there should be no locked mappings
+when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+beginning of the functions). Without locked mappings, there should never
+be more than one element in each list (see xen_map_cache_unlocked:
+entry->lock == true is a necessary condition to append a new entry to
+the list, otherwise it is just remapped).
+
+Can you confirm that what you are seeing are locked mappings
+when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+by turning it into a printf or by defininig MAPCACHE_DEBUG.
+In fact, I think the DPRINTF above is incorrect too. In
+pci_add_option_rom(), rtl8139 rom is locked mapped in
+pci_add_option_rom->memory_region_get_ram_ptr (after
+memory_region_init_ram). So actually I think we should remove the
+DPRINTF warning as it is normal.
+Let me explain why the DPRINTF warning is there: emulated dma operations
+can involve locked mappings. Once a dma operation completes, the related
+mapping is unlocked and can be safely destroyed. But if we destroy a
+locked mapping in xen_invalidate_map_cache, while a dma is still
+ongoing, QEMU will crash. We cannot handle that case.
+
+However, the scenario you described is different. It has nothing to do
+with DMA. It looks like pci_add_option_rom calls
+memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+locked mapping and it is never unlocked or destroyed.
+
+It looks like "ptr" is not used after pci_add_option_rom returns. Does
+the append patch fix the problem you are seeing? For the proper fix, I
+think we probably need some sort of memory_region_unmap wrapper or maybe
+a call to address_space_unmap.
+Hmm, for some reason my message to the Xen-devel list got rejected but was sent
+to Qemu-devel instead, without any notice. Sorry if I'm missing something
+obvious as a list newbie.
+
+Stefano, hrg,
+
+There is an issue with inconsistency between the list of normal MapCacheEntry's
+and their 'reverse' counterparts - MapCacheRev's in locked_entries.
+When bad situation happens, there are multiple (locked) MapCacheEntry
+entries in the bucket's linked list along with a number of MapCacheRev's. And
+when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
+first list and calculates a wrong pointer from it which may then be caught with
+the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
+this issue as well I think.
+
+I'll try to provide a test code which can reproduce the issue from the
+guest side using an emulated IDE controller, though it's much simpler to achieve
+this result with an AHCI controller using multiple NCQ I/O commands. So far I've
+seen this issue only with Windows 7 (and above) guest on AHCI, but any block I/O
+DMA should be enough I think.
+Yes, I think there may be other bugs lurking, considering the complexity, 
+though we need to reproduce it if we want to delve into it.
+
+On Wed, 12 Apr 2017, Alexey G wrote:
+>
+On Tue, 11 Apr 2017 15:32:09 -0700 (PDT)
+>
+Stefano Stabellini <address@hidden> wrote:
+>
+>
+> On Tue, 11 Apr 2017, hrg wrote:
+>
+> > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+>
+> > <address@hidden> wrote:
+>
+> > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+> > >> On Mon, 10 Apr 2017, hrg wrote:
+>
+> > >> > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> > >> > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> > >> > >> Hi,
+>
+> > >> > >>
+>
+> > >> > >> In xen_map_cache_unlocked(), map to guest memory maybe in
+>
+> > >> > >> entry->next instead of first level entry (if map to rom other than
+>
+> > >> > >> guest memory comes first), while in xen_invalidate_map_cache(),
+>
+> > >> > >> when VM ballooned out memory, qemu did not invalidate cache
+>
+> > >> > >> entries
+>
+> > >> > >> in linked list(entry->next), so when VM balloon back in memory,
+>
+> > >> > >> gfns probably mapped to different mfns, thus if guest asks device
+>
+> > >> > >> to DMA to these GPA, qemu may DMA to stale MFNs.
+>
+> > >> > >>
+>
+> > >> > >> So I think in xen_invalidate_map_cache() linked lists should also
+>
+> > >> > >> be
+>
+> > >> > >> checked and invalidated.
+>
+> > >> > >>
+>
+> > >> > >> What’s your opinion? Is this a bug? Is my analyze correct?
+>
+> > >>
+>
+> > >> Yes, you are right. We need to go through the list for each element of
+>
+> > >> the array in xen_invalidate_map_cache. Can you come up with a patch?
+>
+> > >
+>
+> > > I spoke too soon. In the regular case there should be no locked mappings
+>
+> > > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+>
+> > > beginning of the functions). Without locked mappings, there should never
+>
+> > > be more than one element in each list (see xen_map_cache_unlocked:
+>
+> > > entry->lock == true is a necessary condition to append a new entry to
+>
+> > > the list, otherwise it is just remapped).
+>
+> > >
+>
+> > > Can you confirm that what you are seeing are locked mappings
+>
+> > > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+>
+> > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
+>
+> >
+>
+> > In fact, I think the DPRINTF above is incorrect too. In
+>
+> > pci_add_option_rom(), rtl8139 rom is locked mapped in
+>
+> > pci_add_option_rom->memory_region_get_ram_ptr (after
+>
+> > memory_region_init_ram). So actually I think we should remove the
+>
+> > DPRINTF warning as it is normal.
+>
+>
+>
+> Let me explain why the DPRINTF warning is there: emulated dma operations
+>
+> can involve locked mappings. Once a dma operation completes, the related
+>
+> mapping is unlocked and can be safely destroyed. But if we destroy a
+>
+> locked mapping in xen_invalidate_map_cache, while a dma is still
+>
+> ongoing, QEMU will crash. We cannot handle that case.
+>
+>
+>
+> However, the scenario you described is different. It has nothing to do
+>
+> with DMA. It looks like pci_add_option_rom calls
+>
+> memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+>
+> locked mapping and it is never unlocked or destroyed.
+>
+>
+>
+> It looks like "ptr" is not used after pci_add_option_rom returns. Does
+>
+> the append patch fix the problem you are seeing? For the proper fix, I
+>
+> think we probably need some sort of memory_region_unmap wrapper or maybe
+>
+> a call to address_space_unmap.
+>
+>
+Hmm, for some reason my message to the Xen-devel list got rejected but was
+>
+sent
+>
+to Qemu-devel instead, without any notice. Sorry if I'm missing something
+>
+obvious as a list newbie.
+>
+>
+Stefano, hrg,
+>
+>
+There is an issue with inconsistency between the list of normal
+>
+MapCacheEntry's
+>
+and their 'reverse' counterparts - MapCacheRev's in locked_entries.
+>
+When bad situation happens, there are multiple (locked) MapCacheEntry
+>
+entries in the bucket's linked list along with a number of MapCacheRev's. And
+>
+when it comes to a reverse lookup, xen-mapcache picks the wrong entry from the
+>
+first list and calculates a wrong pointer from it which may then be caught
+>
+with
+>
+the "Bad RAM offset" check (or not). Mapcache invalidation might be related to
+>
+this issue as well I think.
+>
+>
+I'll try to provide a test code which can reproduce the issue from the
+>
+guest side using an emulated IDE controller, though it's much simpler to
+>
+achieve
+>
+this result with an AHCI controller using multiple NCQ I/O commands. So far
+>
+I've
+>
+seen this issue only with Windows 7 (and above) guest on AHCI, but any block
+>
+I/O
+>
+DMA should be enough I think.
+That would be helpful. Please see if you can reproduce it after fixing
+the other issue (
+http://marc.info/?l=qemu-devel&m=149195042500707&w=2
+).
+
+On 2017/4/12 6:32, Stefano Stabellini wrote:
+On Tue, 11 Apr 2017, hrg wrote:
+On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+<address@hidden> wrote:
+On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+On Mon, 10 Apr 2017, hrg wrote:
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+Hi,
+
+In xen_map_cache_unlocked(), map to guest memory maybe in entry->next
+instead of first level entry (if map to rom other than guest memory
+comes first), while in xen_invalidate_map_cache(), when VM ballooned
+out memory, qemu did not invalidate cache entries in linked
+list(entry->next), so when VM balloon back in memory, gfns probably
+mapped to different mfns, thus if guest asks device to DMA to these
+GPA, qemu may DMA to stale MFNs.
+
+So I think in xen_invalidate_map_cache() linked lists should also be
+checked and invalidated.
+
+What’s your opinion? Is this a bug? Is my analyze correct?
+Yes, you are right. We need to go through the list for each element of
+the array in xen_invalidate_map_cache. Can you come up with a patch?
+I spoke too soon. In the regular case there should be no locked mappings
+when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+beginning of the functions). Without locked mappings, there should never
+be more than one element in each list (see xen_map_cache_unlocked:
+entry->lock == true is a necessary condition to append a new entry to
+the list, otherwise it is just remapped).
+
+Can you confirm that what you are seeing are locked mappings
+when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+by turning it into a printf or by defininig MAPCACHE_DEBUG.
+In fact, I think the DPRINTF above is incorrect too. In
+pci_add_option_rom(), rtl8139 rom is locked mapped in
+pci_add_option_rom->memory_region_get_ram_ptr (after
+memory_region_init_ram). So actually I think we should remove the
+DPRINTF warning as it is normal.
+Let me explain why the DPRINTF warning is there: emulated dma operations
+can involve locked mappings. Once a dma operation completes, the related
+mapping is unlocked and can be safely destroyed. But if we destroy a
+locked mapping in xen_invalidate_map_cache, while a dma is still
+ongoing, QEMU will crash. We cannot handle that case.
+
+However, the scenario you described is different. It has nothing to do
+with DMA. It looks like pci_add_option_rom calls
+memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+locked mapping and it is never unlocked or destroyed.
+
+It looks like "ptr" is not used after pci_add_option_rom returns. Does
+the append patch fix the problem you are seeing? For the proper fix, I
+think we probably need some sort of memory_region_unmap wrapper or maybe
+a call to address_space_unmap.
+Yes, I think so, maybe this is the proper way to fix this.
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+index e6b08e1..04f98b7 100644
+--- a/hw/pci/pci.c
++++ b/hw/pci/pci.c
+@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool 
+is_default_rom,
+      }
+pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
++    xen_invalidate_map_cache_entry(ptr);
+  }
+static void pci_del_option_rom(PCIDevice *pdev)
+
+On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
+>
+On 2017/4/12 6:32, Stefano Stabellini wrote:
+>
+> On Tue, 11 Apr 2017, hrg wrote:
+>
+> > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+>
+> > <address@hidden> wrote:
+>
+> > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+> > > > On Mon, 10 Apr 2017, hrg wrote:
+>
+> > > > > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+>
+> > > > > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+>
+> > > > > > > Hi,
+>
+> > > > > > >
+>
+> > > > > > > In xen_map_cache_unlocked(), map to guest memory maybe in
+>
+> > > > > > > entry->next
+>
+> > > > > > > instead of first level entry (if map to rom other than guest
+>
+> > > > > > > memory
+>
+> > > > > > > comes first), while in xen_invalidate_map_cache(), when VM
+>
+> > > > > > > ballooned
+>
+> > > > > > > out memory, qemu did not invalidate cache entries in linked
+>
+> > > > > > > list(entry->next), so when VM balloon back in memory, gfns
+>
+> > > > > > > probably
+>
+> > > > > > > mapped to different mfns, thus if guest asks device to DMA to
+>
+> > > > > > > these
+>
+> > > > > > > GPA, qemu may DMA to stale MFNs.
+>
+> > > > > > >
+>
+> > > > > > > So I think in xen_invalidate_map_cache() linked lists should
+>
+> > > > > > > also be
+>
+> > > > > > > checked and invalidated.
+>
+> > > > > > >
+>
+> > > > > > > What’s your opinion? Is this a bug? Is my analyze correct?
+>
+> > > > Yes, you are right. We need to go through the list for each element of
+>
+> > > > the array in xen_invalidate_map_cache. Can you come up with a patch?
+>
+> > > I spoke too soon. In the regular case there should be no locked mappings
+>
+> > > when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+>
+> > > beginning of the functions). Without locked mappings, there should never
+>
+> > > be more than one element in each list (see xen_map_cache_unlocked:
+>
+> > > entry->lock == true is a necessary condition to append a new entry to
+>
+> > > the list, otherwise it is just remapped).
+>
+> > >
+>
+> > > Can you confirm that what you are seeing are locked mappings
+>
+> > > when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+>
+> > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
+>
+> > In fact, I think the DPRINTF above is incorrect too. In
+>
+> > pci_add_option_rom(), rtl8139 rom is locked mapped in
+>
+> > pci_add_option_rom->memory_region_get_ram_ptr (after
+>
+> > memory_region_init_ram). So actually I think we should remove the
+>
+> > DPRINTF warning as it is normal.
+>
+> Let me explain why the DPRINTF warning is there: emulated dma operations
+>
+> can involve locked mappings. Once a dma operation completes, the related
+>
+> mapping is unlocked and can be safely destroyed. But if we destroy a
+>
+> locked mapping in xen_invalidate_map_cache, while a dma is still
+>
+> ongoing, QEMU will crash. We cannot handle that case.
+>
+>
+>
+> However, the scenario you described is different. It has nothing to do
+>
+> with DMA. It looks like pci_add_option_rom calls
+>
+> memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+>
+> locked mapping and it is never unlocked or destroyed.
+>
+>
+>
+> It looks like "ptr" is not used after pci_add_option_rom returns. Does
+>
+> the append patch fix the problem you are seeing? For the proper fix, I
+>
+> think we probably need some sort of memory_region_unmap wrapper or maybe
+>
+> a call to address_space_unmap.
+>
+>
+Yes, I think so, maybe this is the proper way to fix this.
+Would you be up for sending a proper patch and testing it? We cannot call
+xen_invalidate_map_cache_entry directly from pci.c though, it would need
+to be one of the other functions like address_space_unmap for example.
+
+
+>
+> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+>
+> index e6b08e1..04f98b7 100644
+>
+> --- a/hw/pci/pci.c
+>
+> +++ b/hw/pci/pci.c
+>
+> @@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool
+>
+> is_default_rom,
+>
+>       }
+>
+>         pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
+>
+> +    xen_invalidate_map_cache_entry(ptr);
+>
+>   }
+>
+>     static void pci_del_option_rom(PCIDevice *pdev)
+
+On 2017/4/13 7:51, Stefano Stabellini wrote:
+On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
+On 2017/4/12 6:32, Stefano Stabellini wrote:
+On Tue, 11 Apr 2017, hrg wrote:
+On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+<address@hidden> wrote:
+On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+On Mon, 10 Apr 2017, hrg wrote:
+On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden> wrote:
+On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden> wrote:
+Hi,
+
+In xen_map_cache_unlocked(), map to guest memory maybe in
+entry->next
+instead of first level entry (if map to rom other than guest
+memory
+comes first), while in xen_invalidate_map_cache(), when VM
+ballooned
+out memory, qemu did not invalidate cache entries in linked
+list(entry->next), so when VM balloon back in memory, gfns
+probably
+mapped to different mfns, thus if guest asks device to DMA to
+these
+GPA, qemu may DMA to stale MFNs.
+
+So I think in xen_invalidate_map_cache() linked lists should
+also be
+checked and invalidated.
+
+What’s your opinion? Is this a bug? Is my analyze correct?
+Yes, you are right. We need to go through the list for each element of
+the array in xen_invalidate_map_cache. Can you come up with a patch?
+I spoke too soon. In the regular case there should be no locked mappings
+when xen_invalidate_map_cache is called (see the DPRINTF warning at the
+beginning of the functions). Without locked mappings, there should never
+be more than one element in each list (see xen_map_cache_unlocked:
+entry->lock == true is a necessary condition to append a new entry to
+the list, otherwise it is just remapped).
+
+Can you confirm that what you are seeing are locked mappings
+when xen_invalidate_map_cache is called? To find out, enable the DPRINTK
+by turning it into a printf or by defininig MAPCACHE_DEBUG.
+In fact, I think the DPRINTF above is incorrect too. In
+pci_add_option_rom(), rtl8139 rom is locked mapped in
+pci_add_option_rom->memory_region_get_ram_ptr (after
+memory_region_init_ram). So actually I think we should remove the
+DPRINTF warning as it is normal.
+Let me explain why the DPRINTF warning is there: emulated dma operations
+can involve locked mappings. Once a dma operation completes, the related
+mapping is unlocked and can be safely destroyed. But if we destroy a
+locked mapping in xen_invalidate_map_cache, while a dma is still
+ongoing, QEMU will crash. We cannot handle that case.
+
+However, the scenario you described is different. It has nothing to do
+with DMA. It looks like pci_add_option_rom calls
+memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+locked mapping and it is never unlocked or destroyed.
+
+It looks like "ptr" is not used after pci_add_option_rom returns. Does
+the append patch fix the problem you are seeing? For the proper fix, I
+think we probably need some sort of memory_region_unmap wrapper or maybe
+a call to address_space_unmap.
+Yes, I think so, maybe this is the proper way to fix this.
+Would you be up for sending a proper patch and testing it? We cannot call
+xen_invalidate_map_cache_entry directly from pci.c though, it would need
+to be one of the other functions like address_space_unmap for example.
+Yes, I will look into this.
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+index e6b08e1..04f98b7 100644
+--- a/hw/pci/pci.c
++++ b/hw/pci/pci.c
+@@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev, bool
+is_default_rom,
+       }
+         pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
++    xen_invalidate_map_cache_entry(ptr);
+   }
+     static void pci_del_option_rom(PCIDevice *pdev)
+
+On Thu, 13 Apr 2017, Herongguang (Stephen) wrote:
+>
+On 2017/4/13 7:51, Stefano Stabellini wrote:
+>
+> On Wed, 12 Apr 2017, Herongguang (Stephen) wrote:
+>
+> > On 2017/4/12 6:32, Stefano Stabellini wrote:
+>
+> > > On Tue, 11 Apr 2017, hrg wrote:
+>
+> > > > On Tue, Apr 11, 2017 at 3:50 AM, Stefano Stabellini
+>
+> > > > <address@hidden> wrote:
+>
+> > > > > On Mon, 10 Apr 2017, Stefano Stabellini wrote:
+>
+> > > > > > On Mon, 10 Apr 2017, hrg wrote:
+>
+> > > > > > > On Sun, Apr 9, 2017 at 11:55 PM, hrg <address@hidden>
+>
+> > > > > > > wrote:
+>
+> > > > > > > > On Sun, Apr 9, 2017 at 11:52 PM, hrg <address@hidden>
+>
+> > > > > > > > wrote:
+>
+> > > > > > > > > Hi,
+>
+> > > > > > > > >
+>
+> > > > > > > > > In xen_map_cache_unlocked(), map to guest memory maybe in
+>
+> > > > > > > > > entry->next
+>
+> > > > > > > > > instead of first level entry (if map to rom other than guest
+>
+> > > > > > > > > memory
+>
+> > > > > > > > > comes first), while in xen_invalidate_map_cache(), when VM
+>
+> > > > > > > > > ballooned
+>
+> > > > > > > > > out memory, qemu did not invalidate cache entries in linked
+>
+> > > > > > > > > list(entry->next), so when VM balloon back in memory, gfns
+>
+> > > > > > > > > probably
+>
+> > > > > > > > > mapped to different mfns, thus if guest asks device to DMA
+>
+> > > > > > > > > to
+>
+> > > > > > > > > these
+>
+> > > > > > > > > GPA, qemu may DMA to stale MFNs.
+>
+> > > > > > > > >
+>
+> > > > > > > > > So I think in xen_invalidate_map_cache() linked lists should
+>
+> > > > > > > > > also be
+>
+> > > > > > > > > checked and invalidated.
+>
+> > > > > > > > >
+>
+> > > > > > > > > What’s your opinion? Is this a bug? Is my analyze correct?
+>
+> > > > > > Yes, you are right. We need to go through the list for each
+>
+> > > > > > element of
+>
+> > > > > > the array in xen_invalidate_map_cache. Can you come up with a
+>
+> > > > > > patch?
+>
+> > > > > I spoke too soon. In the regular case there should be no locked
+>
+> > > > > mappings
+>
+> > > > > when xen_invalidate_map_cache is called (see the DPRINTF warning at
+>
+> > > > > the
+>
+> > > > > beginning of the functions). Without locked mappings, there should
+>
+> > > > > never
+>
+> > > > > be more than one element in each list (see xen_map_cache_unlocked:
+>
+> > > > > entry->lock == true is a necessary condition to append a new entry
+>
+> > > > > to
+>
+> > > > > the list, otherwise it is just remapped).
+>
+> > > > >
+>
+> > > > > Can you confirm that what you are seeing are locked mappings
+>
+> > > > > when xen_invalidate_map_cache is called? To find out, enable the
+>
+> > > > > DPRINTK
+>
+> > > > > by turning it into a printf or by defininig MAPCACHE_DEBUG.
+>
+> > > > In fact, I think the DPRINTF above is incorrect too. In
+>
+> > > > pci_add_option_rom(), rtl8139 rom is locked mapped in
+>
+> > > > pci_add_option_rom->memory_region_get_ram_ptr (after
+>
+> > > > memory_region_init_ram). So actually I think we should remove the
+>
+> > > > DPRINTF warning as it is normal.
+>
+> > > Let me explain why the DPRINTF warning is there: emulated dma operations
+>
+> > > can involve locked mappings. Once a dma operation completes, the related
+>
+> > > mapping is unlocked and can be safely destroyed. But if we destroy a
+>
+> > > locked mapping in xen_invalidate_map_cache, while a dma is still
+>
+> > > ongoing, QEMU will crash. We cannot handle that case.
+>
+> > >
+>
+> > > However, the scenario you described is different. It has nothing to do
+>
+> > > with DMA. It looks like pci_add_option_rom calls
+>
+> > > memory_region_get_ram_ptr to map the rtl8139 rom. The mapping is a
+>
+> > > locked mapping and it is never unlocked or destroyed.
+>
+> > >
+>
+> > > It looks like "ptr" is not used after pci_add_option_rom returns. Does
+>
+> > > the append patch fix the problem you are seeing? For the proper fix, I
+>
+> > > think we probably need some sort of memory_region_unmap wrapper or maybe
+>
+> > > a call to address_space_unmap.
+>
+> >
+>
+> > Yes, I think so, maybe this is the proper way to fix this.
+>
+>
+>
+> Would you be up for sending a proper patch and testing it? We cannot call
+>
+> xen_invalidate_map_cache_entry directly from pci.c though, it would need
+>
+> to be one of the other functions like address_space_unmap for example.
+>
+>
+>
+>
+>
+Yes, I will look into this.
+Any updates?
+
+
+>
+> > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+>
+> > > index e6b08e1..04f98b7 100644
+>
+> > > --- a/hw/pci/pci.c
+>
+> > > +++ b/hw/pci/pci.c
+>
+> > > @@ -2242,6 +2242,7 @@ static void pci_add_option_rom(PCIDevice *pdev,
+>
+> > > bool
+>
+> > > is_default_rom,
+>
+> > >        }
+>
+> > >          pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom);
+>
+> > > +    xen_invalidate_map_cache_entry(ptr);
+>
+> > >    }
+>
+> > >      static void pci_del_option_rom(PCIDevice *pdev)
+>
+
diff --git a/results/classifier/zero-shot/010/review/55367348 b/results/classifier/zero-shot/010/review/55367348
new file mode 100644
index 00000000..a2047c41
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/55367348
@@ -0,0 +1,556 @@
+other: 0.626
+permissions: 0.595
+device: 0.586
+PID: 0.559
+semantic: 0.555
+performance: 0.546
+graphic: 0.532
+network: 0.518
+debug: 0.516
+socket: 0.501
+files: 0.490
+boot: 0.486
+KVM: 0.470
+vnc: 0.465
+debug: 0.157
+files: 0.062
+other: 0.032
+PID: 0.013
+semantic: 0.007
+socket: 0.007
+network: 0.006
+device: 0.005
+KVM: 0.004
+boot: 0.002
+performance: 0.002
+permissions: 0.002
+vnc: 0.002
+graphic: 0.001
+
+[Qemu-devel] [Bug] Docs build fails at interop.rst
+
+https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
+running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
+(Rawhide)
+
+uname - a
+Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
+UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
+
+Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
+allows for the build to occur
+
+Regards
+Aarushi Mehta
+
+On 5/20/19 7:30 AM, Aarushi Mehta wrote:
+>
+https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
+>
+running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
+>
+(Rawhide)
+>
+>
+uname - a
+>
+Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
+>
+UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
+>
+>
+Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
+>
+allows for the build to occur
+>
+>
+Regards
+>
+Aarushi Mehta
+>
+>
+Ah, dang. The blocks aren't strictly conforming json, but the version I
+tested this under didn't seem to care. Your version is much newer. (I
+was using 1.7 as provided by Fedora 29.)
+
+For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
+which should at least turn off the "warnings as errors" option, but I
+don't think that reverting -n will turn off this warning.
+
+I'll try to get ahold of this newer version and see if I can't fix it
+more appropriately.
+
+--js
+
+On 5/20/19 12:37 PM, John Snow wrote:
+>
+>
+>
+On 5/20/19 7:30 AM, Aarushi Mehta wrote:
+>
+>
+https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
+>
+> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
+>
+> (Rawhide)
+>
+>
+>
+> uname - a
+>
+> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
+>
+> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
+>
+>
+>
+> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
+>
+> allows for the build to occur
+>
+>
+>
+> Regards
+>
+> Aarushi Mehta
+>
+>
+>
+>
+>
+>
+Ah, dang. The blocks aren't strictly conforming json, but the version I
+>
+tested this under didn't seem to care. Your version is much newer. (I
+>
+was using 1.7 as provided by Fedora 29.)
+>
+>
+For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
+>
+which should at least turn off the "warnings as errors" option, but I
+>
+don't think that reverting -n will turn off this warning.
+>
+>
+I'll try to get ahold of this newer version and see if I can't fix it
+>
+more appropriately.
+>
+>
+--js
+>
+...Sigh, okay.
+
+So, I am still not actually sure what changed from pygments 2.2 and
+sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
+by default always tries to do add a filter to the pygments lexer that
+raises an error on highlighting failure, instead of the default behavior
+which is to just highlight those errors in the output. There is no
+option to Sphinx that I am aware of to retain this lexing behavior.
+(Effectively, it's strict or nothing.)
+
+This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
+build works with our malformed json.
+
+There are a few options:
+
+1. Update conf.py to ignore these warnings (and all future lexing
+errors), and settle for the fact that there will be no QMP highlighting
+wherever we use the directionality indicators ('->', '<-').
+
+2. Update bitmaps.rst to remove the directionality indicators.
+
+3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
+
+4. Update bitmaps.rst to remove the "json" specification from the code
+block. This will cause sphinx to "guess" the formatting, and the
+pygments guesser will decide it's Python3.
+
+This will parse well enough, but will mis-highlight 'true' and 'false'
+which are not python keywords. This approach may break in the future if
+the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
+still invalid), and leaves us at the mercy of both the guesser and the
+lexer.
+
+I'm not actually sure what I dislike the least; I think I dislike #1 the
+most. #4 gets us most of what we want but is perhaps porcelain.
+
+I suspect if we attempt to move more of our documentation to ReST and
+Sphinx that we will need to answer for ourselves how we intend to
+document QMP code flow examples.
+
+--js
+
+On Mon, May 20, 2019 at 05:25:28PM -0400, John Snow wrote:
+>
+>
+>
+On 5/20/19 12:37 PM, John Snow wrote:
+>
+>
+>
+>
+>
+> On 5/20/19 7:30 AM, Aarushi Mehta wrote:
+>
+>>
+https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
+>
+>> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
+>
+>> (Rawhide)
+>
+>>
+>
+>> uname - a
+>
+>> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
+>
+>> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
+>
+>>
+>
+>> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
+>
+>> allows for the build to occur
+>
+>>
+>
+>> Regards
+>
+>> Aarushi Mehta
+>
+>>
+>
+>>
+>
+>
+>
+> Ah, dang. The blocks aren't strictly conforming json, but the version I
+>
+> tested this under didn't seem to care. Your version is much newer. (I
+>
+> was using 1.7 as provided by Fedora 29.)
+>
+>
+>
+> For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
+>
+> which should at least turn off the "warnings as errors" option, but I
+>
+> don't think that reverting -n will turn off this warning.
+>
+>
+>
+> I'll try to get ahold of this newer version and see if I can't fix it
+>
+> more appropriately.
+>
+>
+>
+> --js
+>
+>
+>
+>
+...Sigh, okay.
+>
+>
+So, I am still not actually sure what changed from pygments 2.2 and
+>
+sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
+>
+by default always tries to do add a filter to the pygments lexer that
+>
+raises an error on highlighting failure, instead of the default behavior
+>
+which is to just highlight those errors in the output. There is no
+>
+option to Sphinx that I am aware of to retain this lexing behavior.
+>
+(Effectively, it's strict or nothing.)
+>
+>
+This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
+>
+build works with our malformed json.
+>
+>
+There are a few options:
+>
+>
+1. Update conf.py to ignore these warnings (and all future lexing
+>
+errors), and settle for the fact that there will be no QMP highlighting
+>
+wherever we use the directionality indicators ('->', '<-').
+>
+>
+2. Update bitmaps.rst to remove the directionality indicators.
+>
+>
+3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
+>
+>
+4. Update bitmaps.rst to remove the "json" specification from the code
+>
+block. This will cause sphinx to "guess" the formatting, and the
+>
+pygments guesser will decide it's Python3.
+>
+>
+This will parse well enough, but will mis-highlight 'true' and 'false'
+>
+which are not python keywords. This approach may break in the future if
+>
+the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
+>
+still invalid), and leaves us at the mercy of both the guesser and the
+>
+lexer.
+>
+>
+I'm not actually sure what I dislike the least; I think I dislike #1 the
+>
+most. #4 gets us most of what we want but is perhaps porcelain.
+>
+>
+I suspect if we attempt to move more of our documentation to ReST and
+>
+Sphinx that we will need to answer for ourselves how we intend to
+>
+document QMP code flow examples.
+Writing a custom lexer that handles "<-" and "->" was simple (see below).
+
+Now, is it possible to convince Sphinx to register and use a custom lexer?
+
+$ cat > /tmp/lexer.py <<EOF
+from pygments.lexer import RegexLexer, DelegatingLexer
+from pygments.lexers.data import JsonLexer
+import re
+from pygments.token import *
+
+class QMPExampleMarkersLexer(RegexLexer):
+    tokens = {
+        'root': [
+            (r' *-> *', Generic.Prompt),
+            (r' *<- *', Generic.Output),
+        ]
+    }
+
+class QMPExampleLexer(DelegatingLexer):
+    def __init__(self, **options):
+        super(QMPExampleLexer, self).__init__(JsonLexer, 
+QMPExampleMarkersLexer, Error, **options)
+EOF
+$ pygmentize -l /tmp/lexer.py:QMPExampleLexer -x -f html <<EOF
+    -> {
+         "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "drive0.inc0.qcow2",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+    <- { "return": {} }
+EOF
+<div class="highlight"><pre><span></span><span class="gp">    -&gt; 
+</span><span class="p">{</span>
+         <span class="nt">&quot;execute&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;drive-backup&quot;</span><span class="p">,</span>
+         <span class="nt">&quot;arguments&quot;</span><span class="p">:</span> 
+<span class="p">{</span>
+           <span class="nt">&quot;device&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;drive0&quot;</span><span class="p">,</span>
+           <span class="nt">&quot;bitmap&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;bitmap0&quot;</span><span class="p">,</span>
+           <span class="nt">&quot;target&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;drive0.inc0.qcow2&quot;</span><span class="p">,</span>
+           <span class="nt">&quot;format&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;qcow2&quot;</span><span class="p">,</span>
+           <span class="nt">&quot;sync&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;incremental&quot;</span><span class="p">,</span>
+           <span class="nt">&quot;mode&quot;</span><span class="p">:</span> 
+<span class="s2">&quot;existing&quot;</span>
+         <span class="p">}</span>
+       <span class="p">}</span>
+
+<span class="go">    &lt;- </span><span class="p">{</span> <span 
+class="nt">&quot;return&quot;</span><span class="p">:</span> <span 
+class="p">{}</span> <span class="p">}</span>
+</pre></div>
+$ 
+
+
+-- 
+Eduardo
+
+On 5/20/19 7:04 PM, Eduardo Habkost wrote:
+>
+On Mon, May 20, 2019 at 05:25:28PM -0400, John Snow wrote:
+>
+>
+>
+>
+>
+> On 5/20/19 12:37 PM, John Snow wrote:
+>
+>>
+>
+>>
+>
+>> On 5/20/19 7:30 AM, Aarushi Mehta wrote:
+>
+>>>
+https://paste.fedoraproject.org/paste/kOPx4jhtUli---TmxSLrlw
+>
+>>> running python3-sphinx-2.0.1-1.fc31.noarch on Fedora release 31
+>
+>>> (Rawhide)
+>
+>>>
+>
+>>> uname - a
+>
+>>> Linux iouring 5.1.0-0.rc6.git3.1.fc31.x86_64 #1 SMP Thu Apr 25 14:25:32
+>
+>>> UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
+>
+>>>
+>
+>>> Reverting commmit 90edef80a0852cf8a3d2668898ee40e8970e431
+>
+>>> allows for the build to occur
+>
+>>>
+>
+>>> Regards
+>
+>>> Aarushi Mehta
+>
+>>>
+>
+>>>
+>
+>>
+>
+>> Ah, dang. The blocks aren't strictly conforming json, but the version I
+>
+>> tested this under didn't seem to care. Your version is much newer. (I
+>
+>> was using 1.7 as provided by Fedora 29.)
+>
+>>
+>
+>> For now, try reverting 9e5b6cb87db66dfb606604fe6cf40e5ddf1ef0e7 instead,
+>
+>> which should at least turn off the "warnings as errors" option, but I
+>
+>> don't think that reverting -n will turn off this warning.
+>
+>>
+>
+>> I'll try to get ahold of this newer version and see if I can't fix it
+>
+>> more appropriately.
+>
+>>
+>
+>> --js
+>
+>>
+>
+>
+>
+> ...Sigh, okay.
+>
+>
+>
+> So, I am still not actually sure what changed from pygments 2.2 and
+>
+> sphinx 1.7 to pygments 2.4 and sphinx 2.0.1, but it appears as if Sphinx
+>
+> by default always tries to do add a filter to the pygments lexer that
+>
+> raises an error on highlighting failure, instead of the default behavior
+>
+> which is to just highlight those errors in the output. There is no
+>
+> option to Sphinx that I am aware of to retain this lexing behavior.
+>
+> (Effectively, it's strict or nothing.)
+>
+>
+>
+> This approach, apparently, is broken in Sphinx 1.7/Pygments 2.2, so the
+>
+> build works with our malformed json.
+>
+>
+>
+> There are a few options:
+>
+>
+>
+> 1. Update conf.py to ignore these warnings (and all future lexing
+>
+> errors), and settle for the fact that there will be no QMP highlighting
+>
+> wherever we use the directionality indicators ('->', '<-').
+>
+>
+>
+> 2. Update bitmaps.rst to remove the directionality indicators.
+>
+>
+>
+> 3. Update bitmaps.rst to format the QMP blocks as raw text instead of JSON.
+>
+>
+>
+> 4. Update bitmaps.rst to remove the "json" specification from the code
+>
+> block. This will cause sphinx to "guess" the formatting, and the
+>
+> pygments guesser will decide it's Python3.
+>
+>
+>
+> This will parse well enough, but will mis-highlight 'true' and 'false'
+>
+> which are not python keywords. This approach may break in the future if
+>
+> the Python3 lexer is upgraded to be stricter (because '->' and '<-' are
+>
+> still invalid), and leaves us at the mercy of both the guesser and the
+>
+> lexer.
+>
+>
+>
+> I'm not actually sure what I dislike the least; I think I dislike #1 the
+>
+> most. #4 gets us most of what we want but is perhaps porcelain.
+>
+>
+>
+> I suspect if we attempt to move more of our documentation to ReST and
+>
+> Sphinx that we will need to answer for ourselves how we intend to
+>
+> document QMP code flow examples.
+>
+>
+Writing a custom lexer that handles "<-" and "->" was simple (see below).
+>
+>
+Now, is it possible to convince Sphinx to register and use a custom lexer?
+>
+Spoilers, yes, and I've sent a patch to list. Thanks for your help!
+
diff --git a/results/classifier/zero-shot/010/review/55753058 b/results/classifier/zero-shot/010/review/55753058
new file mode 100644
index 00000000..197814ae
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/55753058
@@ -0,0 +1,317 @@
+other: 0.734
+KVM: 0.713
+vnc: 0.682
+graphic: 0.630
+device: 0.623
+debug: 0.611
+performance: 0.591
+permissions: 0.580
+semantic: 0.577
+network: 0.525
+PID: 0.512
+boot: 0.478
+socket: 0.462
+files: 0.459
+debug: 0.645
+files: 0.093
+performance: 0.091
+PID: 0.040
+other: 0.013
+semantic: 0.010
+network: 0.007
+device: 0.006
+boot: 0.005
+socket: 0.002
+permissions: 0.002
+vnc: 0.002
+graphic: 0.002
+KVM: 0.000
+
+[RESEND][BUG FIX HELP] QEMU main thread endlessly hangs in __ppoll()
+
+Hi Genius,
+I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may still
+exist in the mainline.
+Thanks in advance to heroes who can take a look and share understanding.
+
+The qemu main thread endlessly hangs in the handle of the qmp statement:
+{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
+'drive_del replication0' } }
+and we have the call trace looks like:
+#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
+timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
+sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
+#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
+__nfds=<optimized out>, __fds=<optimized out>)
+at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
+#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
+timeout=<optimized out>) at util/qemu-timer.c:348
+#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
+blocking=blocking@entry=true) at util/aio-posix.c:669
+#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
+ignore_bds_parents=false, parent=0x0, recursive=false,
+bs=0x55561138b0a0) at block/io.c:430
+#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
+parent=0x0, ignore_bds_parents=<optimized out>,
+poll=<optimized out>) at block/io.c:396
+#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
+child=0x7f36dc0ce380, errp=<optimized out>)
+at block/quorum.c:1063
+#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
+"colo-disk0", has_child=<optimized out>,
+child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
+errp=0x7ffc56c66f98) at blockdev.c:4494
+#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
+out>, ret=<optimized out>, errp=0x7ffc56c67018)
+at qapi/qapi-commands-block-core.c:1538
+#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
+allow_oob=<optimized out>, request=<optimized out>,
+cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
+#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
+out>, allow_oob=<optimized out>)
+at qapi/qmp-dispatch.c:175
+#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
+req=<optimized out>) at monitor/qmp.c:145
+#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized out>)
+at monitor/qmp.c:234
+#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
+util/async.c:117
+#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
+#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
+util/aio-posix.c:459
+#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
+callback=<optimized out>, user_data=<optimized out>)
+at util/async.c:260
+#17 0x00007f3c22302fbd in g_main_context_dispatch () from
+/lib/x86_64-linux-gnu/libglib-2.0.so.0
+#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
+#19 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
+#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
+#21 0x000055560ff600fe in main_loop () at vl.c:1814
+#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized out>,
+envp=<optimized out>) at vl.c:4503
+We found that we're doing endless check in the line of
+block/io.c:bdrv_do_drained_begin():
+BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
+and it turns out that the bdrv_drain_poll() always get true from:
+- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
+- AND atomic_read(&bs->in_flight)
+
+I personally think this is a deadlock issue in the a QEMU block layer
+(as we know, we have some #FIXME comments in related codes, such as block
+permisson update).
+Any comments are welcome and appreciated.
+
+---
+thx,likexu
+
+On 2/28/21 9:39 PM, Like Xu wrote:
+Hi Genius,
+I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
+still exist in the mainline.
+Thanks in advance to heroes who can take a look and share understanding.
+Do you have a test case that reproduces on 5.2? It'd be nice to know if
+it was still a problem in the latest source tree or not.
+--js
+The qemu main thread endlessly hangs in the handle of the qmp statement:
+{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
+'drive_del replication0' } }
+and we have the call trace looks like:
+#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
+timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
+sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
+#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
+__nfds=<optimized out>, __fds=<optimized out>)
+at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
+#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
+timeout=<optimized out>) at util/qemu-timer.c:348
+#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
+blocking=blocking@entry=true) at util/aio-posix.c:669
+#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
+ignore_bds_parents=false, parent=0x0, recursive=false,
+bs=0x55561138b0a0) at block/io.c:430
+#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
+parent=0x0, ignore_bds_parents=<optimized out>,
+poll=<optimized out>) at block/io.c:396
+#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
+child=0x7f36dc0ce380, errp=<optimized out>)
+at block/quorum.c:1063
+#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
+"colo-disk0", has_child=<optimized out>,
+child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
+errp=0x7ffc56c66f98) at blockdev.c:4494
+#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
+out>, ret=<optimized out>, errp=0x7ffc56c67018)
+at qapi/qapi-commands-block-core.c:1538
+#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
+allow_oob=<optimized out>, request=<optimized out>,
+cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
+#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
+out>, allow_oob=<optimized out>)
+at qapi/qmp-dispatch.c:175
+#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
+req=<optimized out>) at monitor/qmp.c:145
+#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized
+out>) at monitor/qmp.c:234
+#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
+util/async.c:117
+#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
+#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
+util/aio-posix.c:459
+#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
+callback=<optimized out>, user_data=<optimized out>)
+at util/async.c:260
+#17 0x00007f3c22302fbd in g_main_context_dispatch () from
+/lib/x86_64-linux-gnu/libglib-2.0.so.0
+#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
+#19 os_host_main_loop_wait (timeout=<optimized out>) at
+util/main-loop.c:242
+#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
+#21 0x000055560ff600fe in main_loop () at vl.c:1814
+#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized
+out>, envp=<optimized out>) at vl.c:4503
+We found that we're doing endless check in the line of
+block/io.c:bdrv_do_drained_begin():
+    BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
+and it turns out that the bdrv_drain_poll() always get true from:
+- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
+- AND atomic_read(&bs->in_flight)
+
+I personally think this is a deadlock issue in the a QEMU block layer
+(as we know, we have some #FIXME comments in related codes, such as
+block permisson update).
+Any comments are welcome and appreciated.
+
+---
+thx,likexu
+
+Hi John,
+
+Thanks for your comment.
+
+On 2021/3/5 7:53, John Snow wrote:
+On 2/28/21 9:39 PM, Like Xu wrote:
+Hi Genius,
+I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
+still exist in the mainline.
+Thanks in advance to heroes who can take a look and share understanding.
+Do you have a test case that reproduces on 5.2? It'd be nice to know if it
+was still a problem in the latest source tree or not.
+We narrowed down the source of the bug, which basically came from
+the following qmp usage:
+{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
+'drive_del replication0' } }
+One of the test cases is the COLO usage (docs/colo-proxy.txt).
+
+This issue is sporadic,the probability may be 1/15 for a io-heavy guest.
+
+I believe it's reproducible on 5.2 and the latest tree.
+--js
+The qemu main thread endlessly hangs in the handle of the qmp statement:
+{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
+'drive_del replication0' } }
+and we have the call trace looks like:
+#0 0x00007f3c22045bf6 in __ppoll (fds=0x555611328410, nfds=1,
+timeout=<optimized out>, timeout@entry=0x7ffc56c66db0,
+sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
+#1 0x000055561021f415 in ppoll (__ss=0x0, __timeout=0x7ffc56c66db0,
+__nfds=<optimized out>, __fds=<optimized out>)
+at /usr/include/x86_64-linux-gnu/bits/poll2.h:77
+#2 qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>,
+timeout=<optimized out>) at util/qemu-timer.c:348
+#3 0x0000555610221430 in aio_poll (ctx=ctx@entry=0x5556113010f0,
+blocking=blocking@entry=true) at util/aio-posix.c:669
+#4 0x000055561019268d in bdrv_do_drained_begin (poll=true,
+ignore_bds_parents=false, parent=0x0, recursive=false,
+bs=0x55561138b0a0) at block/io.c:430
+#5 bdrv_do_drained_begin (bs=0x55561138b0a0, recursive=<optimized out>,
+parent=0x0, ignore_bds_parents=<optimized out>,
+poll=<optimized out>) at block/io.c:396
+#6 0x000055561017b60b in quorum_del_child (bs=0x55561138b0a0,
+child=0x7f36dc0ce380, errp=<optimized out>)
+at block/quorum.c:1063
+#7 0x000055560ff5836b in qmp_x_blockdev_change (parent=0x555612373120
+"colo-disk0", has_child=<optimized out>,
+child=0x5556112df3e0 "children.1", has_node=<optimized out>, node=0x0,
+errp=0x7ffc56c66f98) at blockdev.c:4494
+#8 0x00005556100f8f57 in qmp_marshal_x_blockdev_change (args=<optimized
+out>, ret=<optimized out>, errp=0x7ffc56c67018)
+at qapi/qapi-commands-block-core.c:1538
+#9 0x00005556101d8290 in do_qmp_dispatch (errp=0x7ffc56c67010,
+allow_oob=<optimized out>, request=<optimized out>,
+cmds=0x5556109c69a0 <qmp_commands>) at qapi/qmp-dispatch.c:132
+#10 qmp_dispatch (cmds=0x5556109c69a0 <qmp_commands>, request=<optimized
+out>, allow_oob=<optimized out>)
+at qapi/qmp-dispatch.c:175
+#11 0x00005556100d4c4d in monitor_qmp_dispatch (mon=0x5556113a6f40,
+req=<optimized out>) at monitor/qmp.c:145
+#12 0x00005556100d5437 in monitor_qmp_bh_dispatcher (data=<optimized
+out>) at monitor/qmp.c:234
+#13 0x000055561021dbec in aio_bh_call (bh=0x5556112164bGrateful0) at
+util/async.c:117
+#14 aio_bh_poll (ctx=ctx@entry=0x5556112151b0) at util/async.c:117
+#15 0x00005556102212c4 in aio_dispatch (ctx=0x5556112151b0) at
+util/aio-posix.c:459
+#16 0x000055561021dab2 in aio_ctx_dispatch (source=<optimized out>,
+callback=<optimized out>, user_data=<optimized out>)
+at util/async.c:260
+#17 0x00007f3c22302fbd in g_main_context_dispatch () from
+/lib/x86_64-linux-gnu/libglib-2.0.so.0
+#18 0x0000555610220358 in glib_pollfds_poll () at util/main-loop.c:219
+#19 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
+#20 main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
+#21 0x000055560ff600fe in main_loop () at vl.c:1814
+#22 0x000055560fddbce9 in main (argc=<optimized out>, argv=<optimized
+out>, envp=<optimized out>) at vl.c:4503
+We found that we're doing endless check in the line of
+block/io.c:bdrv_do_drained_begin():
+     BDRV_POLL_WHILE(bs, bdrv_drain_poll_top_level(bs, recursive, parent));
+and it turns out that the bdrv_drain_poll() always get true from:
+- bdrv_parent_drained_poll(bs, ignore_parent, ignore_bds_parents)
+- AND atomic_read(&bs->in_flight)
+
+I personally think this is a deadlock issue in the a QEMU block layer
+(as we know, we have some #FIXME comments in related codes, such as block
+permisson update).
+Any comments are welcome and appreciated.
+
+---
+thx,likexu
+
+On 3/4/21 10:08 PM, Like Xu wrote:
+Hi John,
+
+Thanks for your comment.
+
+On 2021/3/5 7:53, John Snow wrote:
+On 2/28/21 9:39 PM, Like Xu wrote:
+Hi Genius,
+I am a user of QEMU v4.2.0 and stuck in an interesting bug, which may
+still exist in the mainline.
+Thanks in advance to heroes who can take a look and share understanding.
+Do you have a test case that reproduces on 5.2? It'd be nice to know
+if it was still a problem in the latest source tree or not.
+We narrowed down the source of the bug, which basically came from
+the following qmp usage:
+{'execute': 'human-monitor-command', 'arguments':{ 'command-line':
+'drive_del replication0' } }
+One of the test cases is the COLO usage (docs/colo-proxy.txt).
+
+This issue is sporadic,the probability may be 1/15 for a io-heavy guest.
+
+I believe it's reproducible on 5.2 and the latest tree.
+Can you please test and confirm that this is the case, and then file a
+bug report on the LP:
+https://launchpad.net/qemu
+and include:
+- The exact commit you used (current origin/master debug build would be
+the most ideal.)
+- Which QEMU binary you are using (qemu-system-x86_64?)
+- The shortest command line you are aware of that reproduces the problem
+- The host OS and kernel version
+- An updated call trace
+- Any relevant commands issued prior to the one that caused the hang; or
+detailed reproduction steps if possible.
+Thanks,
+--js
+
diff --git a/results/classifier/zero-shot/010/review/55961334 b/results/classifier/zero-shot/010/review/55961334
new file mode 100644
index 00000000..f373601b
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/55961334
@@ -0,0 +1,63 @@
+graphic: 0.909
+KVM: 0.881
+semantic: 0.775
+files: 0.766
+device: 0.764
+performance: 0.758
+other: 0.715
+vnc: 0.709
+network: 0.697
+PID: 0.683
+socket: 0.636
+debug: 0.604
+boot: 0.569
+permissions: 0.560
+KVM: 0.924
+debug: 0.797
+other: 0.044
+network: 0.028
+PID: 0.016
+performance: 0.016
+files: 0.011
+socket: 0.007
+semantic: 0.003
+device: 0.003
+vnc: 0.002
+boot: 0.001
+permissions: 0.001
+graphic: 0.000
+
+[Bug] "-ht" flag ignored under KVM - guest still reports HT
+
+Hi Community,
+We have observed that the 'ht' feature bit cannot be disabled when QEMU runs
+with KVM acceleration.
+qemu-system-x86_64 \
+  --enable-kvm \
+  -machine q35 \
+  -cpu host,-ht \
+  -smp 4 \
+  -m 4G \
+  -drive file=rootfs.img,format=raw \
+  -nographic \
+  -append 'console=ttyS0 root=/dev/sda rw'
+Because '-ht' is specified, the guest should expose no HT capability
+(cpuid.1.edx[28] = 0), and /proc/cpuinfo shouldn't show HT feature, but we still
+saw ht in linux guest when run 'cat /proc/cpuinfo'.
+XiaoYao mentioned that:
+
+It has been the behavior of QEMU since
+
+  commit 400281af34e5ee6aa9f5496b53d8f82c6fef9319
+  Author: Andre Przywara <andre.przywara@amd.com>
+  Date:   Wed Aug 19 15:42:42 2009 +0200
+
+    set CPUID bits to present cores and threads topology
+
+that we cannot remove HT CPUID bit from guest via "-cpu xxx,-ht" if the
+VM has >= 2 vcpus.
+I'd like to know whether there's a plan to address this issue, or if the current
+behaviour is considered acceptable.
+Best regards,
+Ewan.
+
diff --git a/results/classifier/zero-shot/010/review/56309929 b/results/classifier/zero-shot/010/review/56309929
new file mode 100644
index 00000000..eb3e4ae3
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/56309929
@@ -0,0 +1,204 @@
+other: 0.690
+device: 0.646
+KVM: 0.636
+performance: 0.608
+vnc: 0.600
+network: 0.589
+permissions: 0.587
+debug: 0.585
+boot: 0.578
+graphic: 0.570
+PID: 0.561
+semantic: 0.521
+socket: 0.516
+files: 0.311
+files: 0.249
+semantic: 0.071
+debug: 0.041
+other: 0.039
+PID: 0.015
+device: 0.007
+performance: 0.007
+network: 0.004
+KVM: 0.003
+permissions: 0.002
+vnc: 0.002
+socket: 0.002
+boot: 0.002
+graphic: 0.001
+
+[Qemu-devel] [BUG 2.6] Broken CONFIG_TPM?
+
+A compilation test with clang -Weverything reported this problem:
+
+config-host.h:112:20: warning: '$' in identifier
+[-Wdollar-in-identifier-extension]
+
+The line of code looks like this:
+
+#define CONFIG_TPM $(CONFIG_SOFTMMU)
+
+This is fine for Makefile code, but won't work as expected in C code.
+
+Am 28.04.2016 um 22:33 schrieb Stefan Weil:
+>
+A compilation test with clang -Weverything reported this problem:
+>
+>
+config-host.h:112:20: warning: '$' in identifier
+>
+[-Wdollar-in-identifier-extension]
+>
+>
+The line of code looks like this:
+>
+>
+#define CONFIG_TPM $(CONFIG_SOFTMMU)
+>
+>
+This is fine for Makefile code, but won't work as expected in C code.
+>
+A complete 64 bit build with clang -Weverything creates a log file of
+1.7 GB.
+Here are the uniq warnings sorted by their frequency:
+
+      1 -Wflexible-array-extensions
+      1 -Wgnu-folding-constant
+      1 -Wunknown-pragmas
+      1 -Wunknown-warning-option
+      1 -Wunreachable-code-loop-increment
+      2 -Warray-bounds-pointer-arithmetic
+      2 -Wdollar-in-identifier-extension
+      3 -Woverlength-strings
+      3 -Wweak-vtables
+      4 -Wgnu-empty-struct
+      4 -Wstring-conversion
+      6 -Wclass-varargs
+      7 -Wc99-extensions
+      7 -Wc++-compat
+      8 -Wfloat-equal
+     11 -Wformat-nonliteral
+     16 -Wshift-negative-value
+     19 -Wglobal-constructors
+     28 -Wc++11-long-long
+     29 -Wembedded-directive
+     38 -Wvla
+     40 -Wcovered-switch-default
+     40 -Wmissing-variable-declarations
+     49 -Wold-style-cast
+     53 -Wgnu-conditional-omitted-operand
+     56 -Wformat-pedantic
+     61 -Wvariadic-macros
+     77 -Wc++11-extensions
+     83 -Wgnu-flexible-array-initializer
+     83 -Wzero-length-array
+     96 -Wgnu-designator
+    102 -Wmissing-noreturn
+    103 -Wconditional-uninitialized
+    107 -Wdisabled-macro-expansion
+    115 -Wunreachable-code-return
+    134 -Wunreachable-code
+    243 -Wunreachable-code-break
+    257 -Wfloat-conversion
+    280 -Wswitch-enum
+    291 -Wpointer-arith
+    298 -Wshadow
+    378 -Wassign-enum
+    395 -Wused-but-marked-unused
+    420 -Wreserved-id-macro
+    493 -Wdocumentation
+    510 -Wshift-sign-overflow
+    565 -Wgnu-case-range
+    566 -Wgnu-zero-variadic-macro-arguments
+    650 -Wbad-function-cast
+    705 -Wmissing-field-initializers
+    817 -Wgnu-statement-expression
+    968 -Wdocumentation-unknown-command
+   1021 -Wextra-semi
+   1112 -Wgnu-empty-initializer
+   1138 -Wcast-qual
+   1509 -Wcast-align
+   1766 -Wextended-offsetof
+   1937 -Wsign-compare
+   2130 -Wpacked
+   2404 -Wunused-macros
+   3081 -Wpadded
+   4182 -Wconversion
+   5430 -Wlanguage-extension-token
+   6655 -Wshorten-64-to-32
+   6995 -Wpedantic
+   7354 -Wunused-parameter
+  27659 -Wsign-conversion
+
+Stefan Weil <address@hidden> writes:
+
+>
+A compilation test with clang -Weverything reported this problem:
+>
+>
+config-host.h:112:20: warning: '$' in identifier
+>
+[-Wdollar-in-identifier-extension]
+>
+>
+The line of code looks like this:
+>
+>
+#define CONFIG_TPM $(CONFIG_SOFTMMU)
+>
+>
+This is fine for Makefile code, but won't work as expected in C code.
+Broken in commit 3b8acc1 "configure: fix TPM logic".  Cc'ing Paolo.
+
+Impact: #ifdef CONFIG_TPM never disables code.  There are no other uses
+of CONFIG_TPM in C code.
+
+I had a quick peek at configure and create_config, but refrained from
+attempting to fix this, since I don't understand when exactly CONFIG_TPM
+should be defined.
+
+On 29 April 2016 at 08:42, Markus Armbruster <address@hidden> wrote:
+>
+Stefan Weil <address@hidden> writes:
+>
+>
+> A compilation test with clang -Weverything reported this problem:
+>
+>
+>
+> config-host.h:112:20: warning: '$' in identifier
+>
+> [-Wdollar-in-identifier-extension]
+>
+>
+>
+> The line of code looks like this:
+>
+>
+>
+> #define CONFIG_TPM $(CONFIG_SOFTMMU)
+>
+>
+>
+> This is fine for Makefile code, but won't work as expected in C code.
+>
+>
+Broken in commit 3b8acc1 "configure: fix TPM logic".  Cc'ing Paolo.
+>
+>
+Impact: #ifdef CONFIG_TPM never disables code.  There are no other uses
+>
+of CONFIG_TPM in C code.
+>
+>
+I had a quick peek at configure and create_config, but refrained from
+>
+attempting to fix this, since I don't understand when exactly CONFIG_TPM
+>
+should be defined.
+Looking at 'git blame' suggests this has been wrong like this for
+some years, so we don't need to scramble to fix it for 2.6.
+
+thanks
+-- PMM
+
diff --git a/results/classifier/zero-shot/010/review/56937788 b/results/classifier/zero-shot/010/review/56937788
new file mode 100644
index 00000000..4d369778
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/56937788
@@ -0,0 +1,368 @@
+other: 0.791
+KVM: 0.755
+vnc: 0.743
+debug: 0.723
+graphic: 0.720
+semantic: 0.705
+device: 0.697
+performance: 0.692
+permissions: 0.685
+files: 0.680
+boot: 0.636
+network: 0.633
+PID: 0.620
+socket: 0.613
+debug: 0.971
+files: 0.082
+PID: 0.062
+device: 0.048
+other: 0.009
+socket: 0.006
+performance: 0.005
+semantic: 0.004
+boot: 0.003
+network: 0.003
+KVM: 0.002
+graphic: 0.001
+permissions: 0.001
+vnc: 0.001
+
+[Qemu-devel] [Bug] virtio-blk: qemu will crash if hotplug virtio-blk device failed
+
+I found that hotplug virtio-blk device will lead to qemu crash.
+
+Re-production steps:
+
+1.       Run VM named vm001
+
+2.       Create a virtio-blk.xml which contains wrong configurations:
+<disk device="lun" rawio="yes" type="block">
+  <driver cache="none" io="native" name="qemu" type="raw" />
+  <source dev="/dev/mapper/11-dm" />
+  <target bus="virtio" dev="vdx" />
+</disk>
+
+3.       Run command : virsh attach-device vm001 vm001
+
+Libvirt will return err msg:
+
+error: Failed to attach device from blk-scsi.xml
+
+error: internal error: unable to execute QEMU command 'device_add': Please set 
+scsi=off for virtio-blk devices in order to use virtio 1.0
+
+it means hotplug virtio-blk device failed.
+
+4.       Suspend or shutdown VM will leads to qemu crash
+
+
+
+from gdb:
+
+
+(gdb) bt
+#0  object_get_class (address@hidden) at qom/object.c:750
+#1  0x00007f9a72582e01 in virtio_vmstate_change (opaque=0x7f9a73d10960, 
+running=0, state=<optimized out>) at 
+/mnt/sdb/lzc/code/open/qemu/hw/virtio/virtio.c:2203
+#2  0x00007f9a7261ef52 in vm_state_notify (address@hidden, address@hidden) at 
+vl.c:1685
+#3  0x00007f9a7252603a in do_vm_stop (state=RUN_STATE_PAUSED) at 
+/mnt/sdb/lzc/code/open/qemu/cpus.c:941
+#4  vm_stop (address@hidden) at /mnt/sdb/lzc/code/open/qemu/cpus.c:1807
+#5  0x00007f9a7262eb1b in qmp_stop (address@hidden) at qmp.c:102
+#6  0x00007f9a7262c70a in qmp_marshal_stop (args=<optimized out>, 
+ret=<optimized out>, errp=0x7ffe63e255d8) at qmp-marshal.c:5854
+#7  0x00007f9a72897e79 in do_qmp_dispatch (errp=0x7ffe63e255d0, 
+request=0x7f9a76510120, cmds=0x7f9a72ee7980 <qmp_commands>) at 
+qapi/qmp-dispatch.c:104
+#8  qmp_dispatch (cmds=0x7f9a72ee7980 <qmp_commands>, address@hidden) at 
+qapi/qmp-dispatch.c:131
+#9  0x00007f9a725288d5 in handle_qmp_command (parser=<optimized out>, 
+tokens=<optimized out>) at /mnt/sdb/lzc/code/open/qemu/monitor.c:3852
+#10 0x00007f9a7289d514 in json_message_process_token (lexer=0x7f9a73ce4498, 
+input=0x7f9a73cc6880, type=JSON_RCURLY, x=36, y=17) at 
+qobject/json-streamer.c:105
+#11 0x00007f9a728bb69b in json_lexer_feed_char (address@hidden, ch=125 '}', 
+address@hidden) at qobject/json-lexer.c:323
+#12 0x00007f9a728bb75e in json_lexer_feed (lexer=0x7f9a73ce4498, 
+buffer=<optimized out>, size=<optimized out>) at qobject/json-lexer.c:373
+#13 0x00007f9a7289d5d9 in json_message_parser_feed (parser=<optimized out>, 
+buffer=<optimized out>, size=<optimized out>) at qobject/json-streamer.c:124
+#14 0x00007f9a7252722e in monitor_qmp_read (opaque=<optimized out>, 
+buf=<optimized out>, size=<optimized out>) at 
+/mnt/sdb/lzc/code/open/qemu/monitor.c:3894
+#15 0x00007f9a7284ee1b in tcp_chr_read (chan=<optimized out>, cond=<optimized 
+out>, opaque=<optimized out>) at chardev/char-socket.c:441
+#16 0x00007f9a6e03e99a in g_main_context_dispatch () from 
+/usr/lib64/libglib-2.0.so.0
+#17 0x00007f9a728a342c in glib_pollfds_poll () at util/main-loop.c:214
+#18 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
+#19 main_loop_wait (address@hidden) at util/main-loop.c:515
+#20 0x00007f9a724e7547 in main_loop () at vl.c:1999
+#21 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at 
+vl.c:4877
+
+Problem happens in virtio_vmstate_change which is called by vm_state_notify,
+static void virtio_vmstate_change(void *opaque, int running, RunState state)
+{
+    VirtIODevice *vdev = opaque;
+    BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
+    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+    bool backend_run = running && (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK);
+    vdev->vm_running = running;
+
+    if (backend_run) {
+        virtio_set_status(vdev, vdev->status);
+    }
+
+    if (k->vmstate_change) {
+        k->vmstate_change(qbus->parent, backend_run);
+    }
+
+    if (!backend_run) {
+        virtio_set_status(vdev, vdev->status);
+    }
+}
+
+Vdev's parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
+virtio_vmstate_change is added to the list vm_change_state_head at 
+virtio_blk_device_realize(virtio_init),
+but after hotplug virtio-blk failed, virtio_vmstate_change will not be removed 
+from vm_change_state_head.
+
+
+I apply a patch as follews:
+
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+index 5884ce3..ea532dc 100644
+--- a/hw/virtio/virtio.c
++++ b/hw/virtio/virtio.c
+@@ -2491,6 +2491,7 @@ static void virtio_device_realize(DeviceState *dev, Error 
+**errp)
+     virtio_bus_device_plugged(vdev, &err);
+     if (err != NULL) {
+         error_propagate(errp, err);
++        vdc->unrealize(dev, NULL);
+         return;
+     }
+
+On Tue, Oct 31, 2017 at 05:19:08AM +0000, linzhecheng wrote:
+>
+I found that hotplug virtio-blk device will lead to qemu crash.
+The author posted a patch in a separate email thread.  Please see
+"[PATCH] fix: unrealize virtio device if we fail to hotplug it".
+
+>
+Re-production steps:
+>
+>
+1.       Run VM named vm001
+>
+>
+2.       Create a virtio-blk.xml which contains wrong configurations:
+>
+<disk device="lun" rawio="yes" type="block">
+>
+<driver cache="none" io="native" name="qemu" type="raw" />
+>
+<source dev="/dev/mapper/11-dm" />
+>
+<target bus="virtio" dev="vdx" />
+>
+</disk>
+>
+>
+3.       Run command : virsh attach-device vm001 vm001
+>
+>
+Libvirt will return err msg:
+>
+>
+error: Failed to attach device from blk-scsi.xml
+>
+>
+error: internal error: unable to execute QEMU command 'device_add': Please
+>
+set scsi=off for virtio-blk devices in order to use virtio 1.0
+>
+>
+it means hotplug virtio-blk device failed.
+>
+>
+4.       Suspend or shutdown VM will leads to qemu crash
+>
+>
+>
+>
+from gdb:
+>
+>
+>
+(gdb) bt
+>
+#0  object_get_class (address@hidden) at qom/object.c:750
+>
+#1  0x00007f9a72582e01 in virtio_vmstate_change (opaque=0x7f9a73d10960,
+>
+running=0, state=<optimized out>) at
+>
+/mnt/sdb/lzc/code/open/qemu/hw/virtio/virtio.c:2203
+>
+#2  0x00007f9a7261ef52 in vm_state_notify (address@hidden, address@hidden) at
+>
+vl.c:1685
+>
+#3  0x00007f9a7252603a in do_vm_stop (state=RUN_STATE_PAUSED) at
+>
+/mnt/sdb/lzc/code/open/qemu/cpus.c:941
+>
+#4  vm_stop (address@hidden) at /mnt/sdb/lzc/code/open/qemu/cpus.c:1807
+>
+#5  0x00007f9a7262eb1b in qmp_stop (address@hidden) at qmp.c:102
+>
+#6  0x00007f9a7262c70a in qmp_marshal_stop (args=<optimized out>,
+>
+ret=<optimized out>, errp=0x7ffe63e255d8) at qmp-marshal.c:5854
+>
+#7  0x00007f9a72897e79 in do_qmp_dispatch (errp=0x7ffe63e255d0,
+>
+request=0x7f9a76510120, cmds=0x7f9a72ee7980 <qmp_commands>) at
+>
+qapi/qmp-dispatch.c:104
+>
+#8  qmp_dispatch (cmds=0x7f9a72ee7980 <qmp_commands>, address@hidden) at
+>
+qapi/qmp-dispatch.c:131
+>
+#9  0x00007f9a725288d5 in handle_qmp_command (parser=<optimized out>,
+>
+tokens=<optimized out>) at /mnt/sdb/lzc/code/open/qemu/monitor.c:3852
+>
+#10 0x00007f9a7289d514 in json_message_process_token (lexer=0x7f9a73ce4498,
+>
+input=0x7f9a73cc6880, type=JSON_RCURLY, x=36, y=17) at
+>
+qobject/json-streamer.c:105
+>
+#11 0x00007f9a728bb69b in json_lexer_feed_char (address@hidden, ch=125 '}',
+>
+address@hidden) at qobject/json-lexer.c:323
+>
+#12 0x00007f9a728bb75e in json_lexer_feed (lexer=0x7f9a73ce4498,
+>
+buffer=<optimized out>, size=<optimized out>) at qobject/json-lexer.c:373
+>
+#13 0x00007f9a7289d5d9 in json_message_parser_feed (parser=<optimized out>,
+>
+buffer=<optimized out>, size=<optimized out>) at qobject/json-streamer.c:124
+>
+#14 0x00007f9a7252722e in monitor_qmp_read (opaque=<optimized out>,
+>
+buf=<optimized out>, size=<optimized out>) at
+>
+/mnt/sdb/lzc/code/open/qemu/monitor.c:3894
+>
+#15 0x00007f9a7284ee1b in tcp_chr_read (chan=<optimized out>, cond=<optimized
+>
+out>, opaque=<optimized out>) at chardev/char-socket.c:441
+>
+#16 0x00007f9a6e03e99a in g_main_context_dispatch () from
+>
+/usr/lib64/libglib-2.0.so.0
+>
+#17 0x00007f9a728a342c in glib_pollfds_poll () at util/main-loop.c:214
+>
+#18 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
+>
+#19 main_loop_wait (address@hidden) at util/main-loop.c:515
+>
+#20 0x00007f9a724e7547 in main_loop () at vl.c:1999
+>
+#21 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
+>
+at vl.c:4877
+>
+>
+Problem happens in virtio_vmstate_change which is called by vm_state_notify,
+>
+static void virtio_vmstate_change(void *opaque, int running, RunState state)
+>
+{
+>
+VirtIODevice *vdev = opaque;
+>
+BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
+>
+VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+>
+bool backend_run = running && (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK);
+>
+vdev->vm_running = running;
+>
+>
+if (backend_run) {
+>
+virtio_set_status(vdev, vdev->status);
+>
+}
+>
+>
+if (k->vmstate_change) {
+>
+k->vmstate_change(qbus->parent, backend_run);
+>
+}
+>
+>
+if (!backend_run) {
+>
+virtio_set_status(vdev, vdev->status);
+>
+}
+>
+}
+>
+>
+Vdev's parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
+>
+virtio_vmstate_change is added to the list vm_change_state_head at
+>
+virtio_blk_device_realize(virtio_init),
+>
+but after hotplug virtio-blk failed, virtio_vmstate_change will not be
+>
+removed from vm_change_state_head.
+>
+>
+>
+I apply a patch as follews:
+>
+>
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+>
+index 5884ce3..ea532dc 100644
+>
+--- a/hw/virtio/virtio.c
+>
++++ b/hw/virtio/virtio.c
+>
+@@ -2491,6 +2491,7 @@ static void virtio_device_realize(DeviceState *dev,
+>
+Error **errp)
+>
+virtio_bus_device_plugged(vdev, &err);
+>
+if (err != NULL) {
+>
+error_propagate(errp, err);
+>
++        vdc->unrealize(dev, NULL);
+>
+return;
+>
+}
+signature.asc
+Description:
+PGP signature
+
diff --git a/results/classifier/zero-shot/010/review/57195159 b/results/classifier/zero-shot/010/review/57195159
new file mode 100644
index 00000000..d9c4e454
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/57195159
@@ -0,0 +1,339 @@
+device: 0.877
+other: 0.868
+graphic: 0.861
+permissions: 0.857
+performance: 0.855
+debug: 0.821
+semantic: 0.794
+boot: 0.781
+PID: 0.755
+KVM: 0.752
+socket: 0.750
+files: 0.697
+network: 0.687
+vnc: 0.626
+debug: 0.764
+files: 0.061
+performance: 0.029
+PID: 0.026
+other: 0.023
+KVM: 0.022
+semantic: 0.017
+device: 0.015
+boot: 0.013
+socket: 0.006
+network: 0.005
+graphic: 0.003
+vnc: 0.003
+permissions: 0.001
+
+[BUG Report] Got a use-after-free error while start arm64 VM with lots of pci controllers
+
+Hi,
+
+We got a use-after-free report in our Euler Robot Test, it is can be reproduced 
+quite easily,
+It can be reproduced by start VM with lots of pci controller and virtio-scsi 
+devices.
+You can find the full qemu log from attachment.
+We have analyzed the log and got the rough process how it happened, but don't 
+know how to fix it.
+
+Could anyone help to fix it ?
+
+The key message shows bellow:
+har device redirected to /dev/pts/1 (label charserial0)
+==1517174==WARNING: ASan doesn't fully support makecontext/swapcontext 
+functions and may produce false positives in some cases!
+=================================================================
+==1517174==ERROR: AddressSanitizer: heap-use-after-free on address 
+0xfffc31a002a0 at pc 0xaaad73e1f668 bp 0xfffc319fddb0 sp 0xfffc319fddd0
+READ of size 8 at 0xfffc31a002a0 thread T1
+    #0 0xaaad73e1f667 in memory_region_unref /home/qemu/memory.c:1771
+    #1 0xaaad73e1f667 in flatview_destroy /home/qemu/memory.c:291
+    #2 0xaaad74adc85b in call_rcu_thread util/rcu.c:283
+    #3 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
+    #4 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
+    #5 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
+
+0xfffc31a002a0 is located 544 bytes inside of 1440-byte region 
+[0xfffc31a00080,0xfffc31a00620)
+freed by thread T37 (CPU 0/KVM) here:
+    #0 0xfffc3c102e23 in free (/lib64/libasan.so.4+0xd2e23)
+    #1 0xfffc3bbc729f in g_free (/lib64/libglib-2.0.so.0+0x5729f)
+    #2 0xaaad745cce03 in pci_bridge_update_mappings hw/pci/pci_bridge.c:245
+    #3 0xaaad745ccf33 in pci_bridge_write_config hw/pci/pci_bridge.c:271
+    #4 0xaaad745ba867 in pci_bridge_dev_write_config 
+hw/pci-bridge/pci_bridge_dev.c:153
+    #5 0xaaad745d6013 in pci_host_config_write_common hw/pci/pci_host.c:81
+    #6 0xaaad73e2346f in memory_region_write_accessor /home/qemu/memory.c:483
+    #7 0xaaad73e1d9ff in access_with_adjusted_size /home/qemu/memory.c:544
+    #8 0xaaad73e28d1f in memory_region_dispatch_write /home/qemu/memory.c:1482
+    #9 0xaaad73d7274f in flatview_write_continue /home/qemu/exec.c:3167
+    #10 0xaaad73d72a53 in flatview_write /home/qemu/exec.c:3207
+    #11 0xaaad73d7c8c3 in address_space_write /home/qemu/exec.c:3297
+    #12 0xaaad73e5059b in kvm_cpu_exec /home/qemu/accel/kvm/kvm-all.c:2386
+    #13 0xaaad73e07ac7 in qemu_kvm_cpu_thread_fn /home/qemu/cpus.c:1246
+    #14 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
+    #15 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
+    #16 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
+
+previously allocated by thread T0 here:
+    #0 0xfffc3c1031cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
+    #1 0xfffc3bbc7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
+    #2 0xaaad745ccb57 in pci_bridge_region_init hw/pci/pci_bridge.c:188
+    #3 0xaaad745cd8cb in pci_bridge_initfn hw/pci/pci_bridge.c:385
+    #4 0xaaad745baaf3 in pci_bridge_dev_realize 
+hw/pci-bridge/pci_bridge_dev.c:64
+    #5 0xaaad745cacd7 in pci_qdev_realize hw/pci/pci.c:2095
+    #6 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
+    #7 0xaaad7485ed23 in property_set_bool qom/object.c:2102
+    #8 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
+    #9 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
+    #10 0xaaad742a53b7 in qdev_device_add /home/qemu/qdev-monitor.c:675
+    #11 0xaaad742a9c7b in device_init_func /home/qemu/vl.c:2074
+    #12 0xaaad74ad4d33 in qemu_opts_foreach util/qemu-option.c:1170
+    #13 0xaaad73d60c17 in main /home/qemu/vl.c:4313
+    #14 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
+    #15 0xaaad73d6db33  
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+
+Thread T1 created by T0 here:
+    #0 0xfffc3c068f6f in __interceptor_pthread_create 
+(/lib64/libasan.so.4+0x38f6f)
+    #1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
+    #2 0xaaad74adc6a7 in rcu_init_complete util/rcu.c:326
+    #3 0xaaad74bab2a7 in __libc_csu_init 
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x17cb2a7)
+    #4 0xfffc39ff0b47 in __libc_start_main (/lib64/libc.so.6+0x20b47)
+    #5 0xaaad73d6db33  (/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+
+Thread T37 (CPU 0/KVM) created by T0 here:
+    #0 0xfffc3c068f6f in __interceptor_pthread_create 
+(/lib64/libasan.so.4+0x38f6f)
+    #1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
+    #2 0xaaad73e09b0f in qemu_dummy_start_vcpu /home/qemu/cpus.c:2045
+    #3 0xaaad73e09b0f in qemu_init_vcpu /home/qemu/cpus.c:2077
+    #4 0xaaad740d36b7 in arm_cpu_realizefn /home/qemu/target/arm/cpu.c:1712
+    #5 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
+    #6 0xaaad7485ed23 in property_set_bool qom/object.c:2102
+    #7 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
+    #8 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
+    #9 0xaaad73fe3e67 in machvirt_init /home/qemu/hw/arm/virt.c:1682
+    #10 0xaaad743acfc7 in machine_run_board_init hw/core/machine.c:1077
+    #11 0xaaad73d60b73 in main /home/qemu/vl.c:4292
+    #12 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
+    #13 0xaaad73d6db33  
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+
+SUMMARY: AddressSanitizer: heap-use-after-free /home/qemu/memory.c:1771 in 
+memory_region_unref
+
+Thanks
+use-after-free-qemu.log
+Description:
+Text document
+
+Cc: address@hidden
+
+On 1/17/2020 4:18 PM, Pan Nengyuan wrote:
+>
+Hi,
+>
+>
+We got a use-after-free report in our Euler Robot Test, it is can be
+>
+reproduced quite easily,
+>
+It can be reproduced by start VM with lots of pci controller and virtio-scsi
+>
+devices.
+>
+You can find the full qemu log from attachment.
+>
+We have analyzed the log and got the rough process how it happened, but don't
+>
+know how to fix it.
+>
+>
+Could anyone help to fix it ?
+>
+>
+The key message shows bellow:
+>
+har device redirected to /dev/pts/1 (label charserial0)
+>
+==1517174==WARNING: ASan doesn't fully support makecontext/swapcontext
+>
+functions and may produce false positives in some cases!
+>
+=================================================================
+>
+==1517174==ERROR: AddressSanitizer: heap-use-after-free on address
+>
+0xfffc31a002a0 at pc 0xaaad73e1f668 bp 0xfffc319fddb0 sp 0xfffc319fddd0
+>
+READ of size 8 at 0xfffc31a002a0 thread T1
+>
+#0 0xaaad73e1f667 in memory_region_unref /home/qemu/memory.c:1771
+>
+#1 0xaaad73e1f667 in flatview_destroy /home/qemu/memory.c:291
+>
+#2 0xaaad74adc85b in call_rcu_thread util/rcu.c:283
+>
+#3 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
+>
+#4 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
+>
+#5 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
+>
+>
+0xfffc31a002a0 is located 544 bytes inside of 1440-byte region
+>
+[0xfffc31a00080,0xfffc31a00620)
+>
+freed by thread T37 (CPU 0/KVM) here:
+>
+#0 0xfffc3c102e23 in free (/lib64/libasan.so.4+0xd2e23)
+>
+#1 0xfffc3bbc729f in g_free (/lib64/libglib-2.0.so.0+0x5729f)
+>
+#2 0xaaad745cce03 in pci_bridge_update_mappings hw/pci/pci_bridge.c:245
+>
+#3 0xaaad745ccf33 in pci_bridge_write_config hw/pci/pci_bridge.c:271
+>
+#4 0xaaad745ba867 in pci_bridge_dev_write_config
+>
+hw/pci-bridge/pci_bridge_dev.c:153
+>
+#5 0xaaad745d6013 in pci_host_config_write_common hw/pci/pci_host.c:81
+>
+#6 0xaaad73e2346f in memory_region_write_accessor /home/qemu/memory.c:483
+>
+#7 0xaaad73e1d9ff in access_with_adjusted_size /home/qemu/memory.c:544
+>
+#8 0xaaad73e28d1f in memory_region_dispatch_write /home/qemu/memory.c:1482
+>
+#9 0xaaad73d7274f in flatview_write_continue /home/qemu/exec.c:3167
+>
+#10 0xaaad73d72a53 in flatview_write /home/qemu/exec.c:3207
+>
+#11 0xaaad73d7c8c3 in address_space_write /home/qemu/exec.c:3297
+>
+#12 0xaaad73e5059b in kvm_cpu_exec /home/qemu/accel/kvm/kvm-all.c:2386
+>
+#13 0xaaad73e07ac7 in qemu_kvm_cpu_thread_fn /home/qemu/cpus.c:1246
+>
+#14 0xaaad74ab31db in qemu_thread_start util/qemu-thread-posix.c:519
+>
+#15 0xfffc3a1678bb  (/lib64/libpthread.so.0+0x78bb)
+>
+#16 0xfffc3a0a616b  (/lib64/libc.so.6+0xd616b)
+>
+>
+previously allocated by thread T0 here:
+>
+#0 0xfffc3c1031cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
+>
+#1 0xfffc3bbc7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
+>
+#2 0xaaad745ccb57 in pci_bridge_region_init hw/pci/pci_bridge.c:188
+>
+#3 0xaaad745cd8cb in pci_bridge_initfn hw/pci/pci_bridge.c:385
+>
+#4 0xaaad745baaf3 in pci_bridge_dev_realize
+>
+hw/pci-bridge/pci_bridge_dev.c:64
+>
+#5 0xaaad745cacd7 in pci_qdev_realize hw/pci/pci.c:2095
+>
+#6 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
+>
+#7 0xaaad7485ed23 in property_set_bool qom/object.c:2102
+>
+#8 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
+>
+#9 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
+>
+#10 0xaaad742a53b7 in qdev_device_add /home/qemu/qdev-monitor.c:675
+>
+#11 0xaaad742a9c7b in device_init_func /home/qemu/vl.c:2074
+>
+#12 0xaaad74ad4d33 in qemu_opts_foreach util/qemu-option.c:1170
+>
+#13 0xaaad73d60c17 in main /home/qemu/vl.c:4313
+>
+#14 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
+>
+#15 0xaaad73d6db33
+>
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+>
+>
+Thread T1 created by T0 here:
+>
+#0 0xfffc3c068f6f in __interceptor_pthread_create
+>
+(/lib64/libasan.so.4+0x38f6f)
+>
+#1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
+>
+#2 0xaaad74adc6a7 in rcu_init_complete util/rcu.c:326
+>
+#3 0xaaad74bab2a7 in __libc_csu_init
+>
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x17cb2a7)
+>
+#4 0xfffc39ff0b47 in __libc_start_main (/lib64/libc.so.6+0x20b47)
+>
+#5 0xaaad73d6db33
+>
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+>
+>
+Thread T37 (CPU 0/KVM) created by T0 here:
+>
+#0 0xfffc3c068f6f in __interceptor_pthread_create
+>
+(/lib64/libasan.so.4+0x38f6f)
+>
+#1 0xaaad74ab54ab in qemu_thread_create util/qemu-thread-posix.c:556
+>
+#2 0xaaad73e09b0f in qemu_dummy_start_vcpu /home/qemu/cpus.c:2045
+>
+#3 0xaaad73e09b0f in qemu_init_vcpu /home/qemu/cpus.c:2077
+>
+#4 0xaaad740d36b7 in arm_cpu_realizefn /home/qemu/target/arm/cpu.c:1712
+>
+#5 0xaaad7439d9f7 in device_set_realized hw/core/qdev.c:865
+>
+#6 0xaaad7485ed23 in property_set_bool qom/object.c:2102
+>
+#7 0xaaad74868f4b in object_property_set_qobject qom/qom-qobject.c:26
+>
+#8 0xaaad74863a43 in object_property_set_bool qom/object.c:1360
+>
+#9 0xaaad73fe3e67 in machvirt_init /home/qemu/hw/arm/virt.c:1682
+>
+#10 0xaaad743acfc7 in machine_run_board_init hw/core/machine.c:1077
+>
+#11 0xaaad73d60b73 in main /home/qemu/vl.c:4292
+>
+#12 0xfffc39ff0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
+>
+#13 0xaaad73d6db33
+>
+(/home/qemu/aarch64-softmmu/qemu-system-aarch64+0x98db33)
+>
+>
+SUMMARY: AddressSanitizer: heap-use-after-free /home/qemu/memory.c:1771 in
+>
+memory_region_unref
+>
+>
+Thanks
+>
+use-after-free-qemu.log
+Description:
+Text document
+
diff --git a/results/classifier/zero-shot/010/review/57231878 b/results/classifier/zero-shot/010/review/57231878
new file mode 100644
index 00000000..54acab79
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/57231878
@@ -0,0 +1,266 @@
+permissions: 0.856
+device: 0.818
+other: 0.788
+semantic: 0.774
+graphic: 0.751
+debug: 0.732
+KVM: 0.708
+PID: 0.684
+network: 0.659
+performance: 0.644
+vnc: 0.640
+socket: 0.624
+boot: 0.609
+files: 0.587
+debug: 0.271
+other: 0.052
+PID: 0.025
+files: 0.025
+boot: 0.023
+network: 0.018
+socket: 0.013
+semantic: 0.012
+device: 0.012
+performance: 0.005
+KVM: 0.003
+graphic: 0.002
+vnc: 0.002
+permissions: 0.001
+
+[Qemu-devel] [BUG] qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
+
+Hello all,
+I wanted to submit a bug report in the tracker, but it seem to require
+an Ubuntu One account, which I'm having trouble with, so I'll just
+give it here and hopefully somebody can make use of it.  The issue
+seems to be in an experimental format, so it's likely not very
+consequential anyway.
+
+For the sake of anyone else simply googling for a workaround, I'll
+just paste in the (cleaned up) brief IRC conversation about my issue
+from the official channel:
+<quy> I'm using QEMU version 2.12.0 on an x86_64 host (Arch Linux,
+Kernel v4.17.2), and I'm trying to create an x86_64 virtual machine
+(FreeBSD-11.1).  The VM always aborts at the same point in the
+installation (downloading 'ports.tgz') with the following error
+message:
+"qemu-system-x86_64: /build/qemu/src/qemu-2.12.0/block/qed.c:1197:
+qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
+zsh: abort (core dumped)  qemu-system-x86_64 -smp 2 -m 4096
+-enable-kvm -hda freebsd/freebsd.qed -devic"
+The commands I ran to create the machine are as follows:
+"qemu-img create -f qed freebsd/freebsd.qed 16G"
+"qemu-system-x86_64 -smp 2 -m 4096 -enable-kvm -hda
+freebsd/freebsd.qed -device e1000,netdev=net0 -netdev user,id=net0
+-cdrom FreeBSD-11.1-RELEASE-amd64-bootonly.iso -boot order=d"
+I tried adding logging options with the -d flag, but I didn't get
+anything that seemed relevant, since I'm not sure what to look for.
+<stsquad> ohh what's a qed device?
+<stsquad> quy: it might be a workaround to use a qcow2 image for now
+<stsquad> ahh the wiki has a statement "It is not recommended to use
+QED for any new images. "
+<danpb> 'qed' was an experimental disk image format created by IBM
+before qcow2 v3 came along
+<danpb> honestly nothing should ever use  QED these days
+<danpb> the good ideas from QED became  qcow2v3
+<stsquad> danpb: sounds like we should put a warning on the option to
+remind users of that fact
+<danpb> quy: sounds like qed driver is simply broken - please do file
+a bug against qemu bug tracker
+<danpb> quy: but you should also really switch to qcow2
+<quy> I see; some people need to update their wikis then.  I don't
+remember where which guide I read when I first learned what little
+QEMU I know, but I remember it specifically remember it saying QED was
+the newest and most optimal format.
+<stsquad> quy: we can only be responsible for our own wiki I'm afraid...
+<danpb> if you remember where you saw that please let us know so we
+can try to get it fixed
+<quy> Thank you very much for the info; I will switch to QCOW.
+Unfortunately, I'm not sure if I will be able to file any bug reports
+in the tracker as I can't seem to log Launchpad, which it seems to
+require.
+<danpb> quy:  an email to the mailing list would suffice too if you
+can't deal with launchpad
+<danpb> kwolf: ^^^ in case you're interested in possible QED
+assertions from 2.12
+
+If any more info is needed, feel free to email me; I'm not actually
+subscribed to this list though.
+Thank you,
+Quytelda Kahja
+
+CC Qemu Block; looks like QED is a bit busted.
+
+On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
+>
+Hello all,
+>
+I wanted to submit a bug report in the tracker, but it seem to require
+>
+an Ubuntu One account, which I'm having trouble with, so I'll just
+>
+give it here and hopefully somebody can make use of it.  The issue
+>
+seems to be in an experimental format, so it's likely not very
+>
+consequential anyway.
+>
+>
+For the sake of anyone else simply googling for a workaround, I'll
+>
+just paste in the (cleaned up) brief IRC conversation about my issue
+>
+from the official channel:
+>
+<quy> I'm using QEMU version 2.12.0 on an x86_64 host (Arch Linux,
+>
+Kernel v4.17.2), and I'm trying to create an x86_64 virtual machine
+>
+(FreeBSD-11.1).  The VM always aborts at the same point in the
+>
+installation (downloading 'ports.tgz') with the following error
+>
+message:
+>
+"qemu-system-x86_64: /build/qemu/src/qemu-2.12.0/block/qed.c:1197:
+>
+qed_aio_write_alloc: Assertion `s->allocating_acb == NULL' failed.
+>
+zsh: abort (core dumped)  qemu-system-x86_64 -smp 2 -m 4096
+>
+-enable-kvm -hda freebsd/freebsd.qed -devic"
+>
+The commands I ran to create the machine are as follows:
+>
+"qemu-img create -f qed freebsd/freebsd.qed 16G"
+>
+"qemu-system-x86_64 -smp 2 -m 4096 -enable-kvm -hda
+>
+freebsd/freebsd.qed -device e1000,netdev=net0 -netdev user,id=net0
+>
+-cdrom FreeBSD-11.1-RELEASE-amd64-bootonly.iso -boot order=d"
+>
+I tried adding logging options with the -d flag, but I didn't get
+>
+anything that seemed relevant, since I'm not sure what to look for.
+>
+<stsquad> ohh what's a qed device?
+>
+<stsquad> quy: it might be a workaround to use a qcow2 image for now
+>
+<stsquad> ahh the wiki has a statement "It is not recommended to use
+>
+QED for any new images. "
+>
+<danpb> 'qed' was an experimental disk image format created by IBM
+>
+before qcow2 v3 came along
+>
+<danpb> honestly nothing should ever use  QED these days
+>
+<danpb> the good ideas from QED became  qcow2v3
+>
+<stsquad> danpb: sounds like we should put a warning on the option to
+>
+remind users of that fact
+>
+<danpb> quy: sounds like qed driver is simply broken - please do file
+>
+a bug against qemu bug tracker
+>
+<danpb> quy: but you should also really switch to qcow2
+>
+<quy> I see; some people need to update their wikis then.  I don't
+>
+remember where which guide I read when I first learned what little
+>
+QEMU I know, but I remember it specifically remember it saying QED was
+>
+the newest and most optimal format.
+>
+<stsquad> quy: we can only be responsible for our own wiki I'm afraid...
+>
+<danpb> if you remember where you saw that please let us know so we
+>
+can try to get it fixed
+>
+<quy> Thank you very much for the info; I will switch to QCOW.
+>
+Unfortunately, I'm not sure if I will be able to file any bug reports
+>
+in the tracker as I can't seem to log Launchpad, which it seems to
+>
+require.
+>
+<danpb> quy:  an email to the mailing list would suffice too if you
+>
+can't deal with launchpad
+>
+<danpb> kwolf: ^^^ in case you're interested in possible QED
+>
+assertions from 2.12
+>
+>
+If any more info is needed, feel free to email me; I'm not actually
+>
+subscribed to this list though.
+>
+Thank you,
+>
+Quytelda Kahja
+>
+
+On 06/29/2018 03:07 PM, John Snow wrote:
+CC Qemu Block; looks like QED is a bit busted.
+
+On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
+Hello all,
+I wanted to submit a bug report in the tracker, but it seem to require
+an Ubuntu One account, which I'm having trouble with, so I'll just
+give it here and hopefully somebody can make use of it.  The issue
+seems to be in an experimental format, so it's likely not very
+consequential anyway.
+Analysis in another thread may be relevant:
+https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg08963.html
+--
+Eric Blake, Principal Software Engineer
+Red Hat, Inc.           +1-919-301-3266
+Virtualization:  qemu.org | libvirt.org
+
+Am 29.06.2018 um 22:16 hat Eric Blake geschrieben:
+>
+On 06/29/2018 03:07 PM, John Snow wrote:
+>
+> CC Qemu Block; looks like QED is a bit busted.
+>
+>
+>
+> On 06/27/2018 10:25 AM, Quytelda Kahja wrote:
+>
+> > Hello all,
+>
+> > I wanted to submit a bug report in the tracker, but it seem to require
+>
+> > an Ubuntu One account, which I'm having trouble with, so I'll just
+>
+> > give it here and hopefully somebody can make use of it.  The issue
+>
+> > seems to be in an experimental format, so it's likely not very
+>
+> > consequential anyway.
+>
+>
+Analysis in another thread may be relevant:
+>
+>
+https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg08963.html
+The assertion there was:
+
+qemu-system-x86_64: block.c:3434: bdrv_replace_node: Assertion 
+`!atomic_read(&to->in_flight)' failed.
+
+Which quite clearly pointed to a drain bug. This one, however, doesn't
+seem to be related to drain, so I think it's probably a different bug.
+
+Kevin
+
diff --git a/results/classifier/zero-shot/010/review/57756589 b/results/classifier/zero-shot/010/review/57756589
new file mode 100644
index 00000000..0b4d1b98
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/57756589
@@ -0,0 +1,1445 @@
+other: 0.899
+device: 0.853
+vnc: 0.851
+permissions: 0.842
+performance: 0.839
+semantic: 0.835
+boot: 0.827
+graphic: 0.824
+network: 0.822
+socket: 0.820
+PID: 0.819
+KVM: 0.817
+files: 0.816
+debug: 0.803
+debug: 0.667
+vnc: 0.451
+socket: 0.358
+boot: 0.101
+KVM: 0.100
+files: 0.092
+PID: 0.083
+network: 0.075
+device: 0.070
+other: 0.046
+performance: 0.042
+permissions: 0.008
+semantic: 0.008
+graphic: 0.004
+
+[Qemu-devel] 答复: Re:   答复: Re:  答复: Re: [BUG]COLO failover hang
+
+amost like wiki，but panic in Primary Node.
+
+
+
+
+setp:
+
+1 
+
+Primary Node.
+
+x86_64-softmmu/qemu-system-x86_64 -enable-kvm -boot c -m 2048 -smp 2 -qmp stdio 
+-vnc :7 -name primary -cpu qemu64,+kvmclock -device piix3-usb-uhci -usb 
+-usbdevice tablet\
+
+  -drive 
+if=virtio,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,
+
+   
+children.0.file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,children.0.driver=qcow2
+ -S \
+
+  -netdev 
+tap,id=hn1,vhost=off,script=/etc/qemu-ifup2,downscript=/etc/qemu-ifdown2 \
+
+  -device e1000,id=e1,netdev=hn1,mac=52:a4:00:12:78:67 \
+
+  -netdev 
+tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown \
+
+  -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 \
+
+  -chardev socket,id=mirror0,host=9.61.1.8,port=9003,server,nowait -chardev 
+socket,id=compare1,host=9.61.1.8,port=9004,server,nowait \
+
+  -chardev socket,id=compare0,host=9.61.1.8,port=9001,server,nowait -chardev 
+socket,id=compare0-0,host=9.61.1.8,port=9001 \
+
+  -chardev socket,id=compare_out,host=9.61.1.8,port=9005,server,nowait \
+
+  -chardev socket,id=compare_out0,host=9.61.1.8,port=9005 \
+
+  -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 \
+
+  -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out 
+-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 \
+
+  -object 
+colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0
+
+2 Second node:
+
+x86_64-softmmu/qemu-system-x86_64 -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 
+-name secondary -enable-kvm -cpu qemu64,+kvmclock -device piix3-usb-uhci -usb 
+-usbdevice tablet\
+
+  -drive 
+if=none,id=colo-disk0,file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,driver=qcow2,node-name=node0
+ \
+
+  -drive 
+if=virtio,id=active-disk0,driver=replication,mode=secondary,file.driver=qcow2,top-id=active-disk0,file.file.filename=/mnt/ramfstest/active_disk.img,file.backing.driver=qcow2,file.backing.file.filename=/mnt/ramfstest/hidden_disk.img,file.backing.backing=colo-disk0
+  \
+
+   -netdev 
+tap,id=hn1,vhost=off,script=/etc/qemu-ifup2,downscript=/etc/qemu-ifdown2 \
+
+  -device e1000,id=e1,netdev=hn1,mac=52:a4:00:12:78:67 \
+
+  -netdev 
+tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown \
+
+  -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 -chardev 
+socket,id=red0,host=9.61.1.8,port=9003 \
+
+  -chardev socket,id=red1,host=9.61.1.8,port=9004 \
+
+  -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 \
+
+  -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 \
+
+  -object filter-rewriter,id=rew0,netdev=hn0,queue=all -incoming tcp:0:8888
+
+3  Secondary node:
+
+{'execute':'qmp_capabilities'}
+
+{ 'execute': 'nbd-server-start',
+
+  'arguments': {'addr': {'type': 'inet', 'data': {'host': '9.61.1.7', 'port': 
+'8889'} } }
+
+}
+
+{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk0', 'writable': 
+true } }
+
+4:Primary Node：
+
+{'execute':'qmp_capabilities'}
+
+
+{ 'execute': 'human-monitor-command',
+
+  'arguments': {'command-line': 'drive_add -n buddy 
+driver=replication,mode=primary,file.driver=nbd,file.host=9.61.1.7,file.port=8889,file.export=colo-disk0,node-name=node0'}}
+
+{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', 'node': 
+'node0' } }
+
+{ 'execute': 'migrate-set-capabilities',
+
+      'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } 
+] } }
+
+{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:9.61.1.7:8888' } }
+
+
+
+
+then can see two runing VMs, whenever you make changes to PVM, SVM will be 
+synced.  
+
+
+
+
+5：Primary Node：
+
+echo c ＞ /proc/sysrq-trigger
+
+
+
+
+６：Secondary node:
+
+{ 'execute': 'nbd-server-stop' }
+
+{ "execute": "x-colo-lost-heartbeat" }
+
+
+
+
+then can see the Secondary node hang at recvmsg recvmsg .
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月21日 16:27
+主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
+
+
+
+
+
+Hi,
+
+On 2017/3/21 16:10, address@hidden wrote:
+＞ Thank you。
+＞
+＞ I have test aready。
+＞
+＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
+＞
+＞ Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node qemu 
+will not produce the problem,but Primary Node panic can。
+＞
+＞ I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+＞
+＞
+
+Yes, you are right, when we do failover for primary/secondary VM, we will 
+shutdown the related
+fd in case it is stuck in the read/write fd.
+
+It seems that you didn't follow the above introduction exactly to do the test. 
+Could you
+share your test procedures ? Especially the commands used in the test.
+
+Thanks,
+Hailiang
+
+＞ when failover,channel_shutdown could not shut down the channel.
+＞
+＞
+＞ so the colo_process_incoming_thread will hang at recvmsg.
+＞
+＞
+＞ I test a patch:
+＞
+＞
+＞ diff --git a/migration/socket.c b/migration/socket.c
+＞
+＞
+＞ index 13966f1..d65a0ea 100644
+＞
+＞
+＞ --- a/migration/socket.c
+＞
+＞
+＞ +++ b/migration/socket.c
+＞
+＞
+＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞
+＞
+＞       }
+＞
+＞
+＞
+＞
+＞
+＞       trace_migration_socket_incoming_accepted()
+＞
+＞
+＞
+＞
+＞
+＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+＞
+＞
+＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞
+＞
+＞       migration_channel_process_incoming(migrate_get_current(),
+＞
+＞
+＞                                          QIO_CHANNEL(sioc))
+＞
+＞
+＞       object_unref(OBJECT(sioc))
+＞
+＞
+＞
+＞
+＞ My test will not hang any more.
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞
+＞
+＞
+＞ 发件人： address@hidden
+＞ 收件人：王广10165992 address@hidden
+＞ 抄送人： address@hidden address@hidden
+＞ 日 期 ：2017年03月21日 15:58
+＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+＞
+＞
+＞
+＞
+＞
+＞ Hi,Wang.
+＞
+＞ You can test this branch:
+＞
+＞
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+＞
+＞ and please follow wiki ensure your own configuration correctly.
+＞
+＞
+http://wiki.qemu-project.org/Features/COLO
+＞
+＞
+＞ Thanks
+＞
+＞ Zhang Chen
+＞
+＞
+＞ On 03/21/2017 03:27 PM, address@hidden wrote:
+＞ ＞
+＞ ＞ hi.
+＞ ＞
+＞ ＞ I test the git qemu master have the same problem.
+＞ ＞
+＞ ＞ (gdb) bt
+＞ ＞
+＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞ ＞
+＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ ＞ (address@hidden, address@hidden "",
+＞ ＞ address@hidden, address@hidden) at io/channel.c:114
+＞ ＞
+＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞
+＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ ＞ migration/qemu-file.c:295
+＞ ＞
+＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ ＞ address@hidden) at migration/qemu-file.c:555
+＞ ＞
+＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ ＞ migration/qemu-file.c:568
+＞ ＞
+＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ ＞ migration/qemu-file.c:648
+＞ ＞
+＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ ＞ address@hidden) at migration/colo.c:244
+＞ ＞
+＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ ＞ out＞, address@hidden,
+＞ ＞ address@hidden)
+＞ ＞
+＞ ＞     at migration/colo.c:264
+＞ ＞
+＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞ ＞
+＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞
+＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞ ＞
+＞ ＞ (gdb) p ioc-＞name
+＞ ＞
+＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞ ＞
+＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞ ＞
+＞ ＞ $3 = 0
+＞ ＞
+＞ ＞
+＞ ＞ (gdb) bt
+＞ ＞
+＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞ ＞
+＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ ＞ gmain.c:3054
+＞ ＞
+＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ ＞ address@hidden) at gmain.c:3630
+＞ ＞
+＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞ ＞
+＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ ＞ util/main-loop.c:258
+＞ ＞
+＞ ＞ #5  main_loop_wait (address@hidden) at
+＞ ＞ util/main-loop.c:506
+＞ ＞
+＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞ ＞
+＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ ＞ out＞) at vl.c:4709
+＞ ＞
+＞ ＞ (gdb) p ioc-＞features
+＞ ＞
+＞ ＞ $1 = 6
+＞ ＞
+＞ ＞ (gdb) p ioc-＞name
+＞ ＞
+＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞ ＞
+＞ ＞
+＞ ＞ May be socket_accept_incoming_migration should
+＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞ ＞
+＞ ＞
+＞ ＞ thank you.
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ 原始邮件
+＞ ＞ address@hidden
+＞ ＞ address@hidden
+＞ ＞ address@hidden@huawei.com＞
+＞ ＞ *日 期 ：*2017年03月16日 14:46
+＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞ ＞
+＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞ ＞
+＞ ＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞ ＞ Do the colo have any plan for development?
+＞ ＞
+＞ ＞ Yes, We are developing. You can see some of patch we pushing.
+＞ ＞
+＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞ ＞
+＞ ＞ In our internal version can run it successfully,
+＞ ＞ The failover detail you can ask Zhanghailiang for help.
+＞ ＞ Next time if you have some question about COLO,
+＞ ＞ please cc me and zhanghailiang address@hidden
+＞ ＞
+＞ ＞
+＞ ＞ Thanks
+＞ ＞ Zhang Chen
+＞ ＞
+＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞ centos7.2+qemu2.7.50
+＞ ＞ ＞ (gdb) bt
+＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ ＞ ＞ io/channel-socket.c:497
+＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞ ＞ address@hidden "", address@hidden,
+＞ ＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞ ＞ migration/qemu-file.c:257
+＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞ ＞ migration/qemu-file.c:523
+＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞ ＞ migration/qemu-file.c:603
+＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞ ＞ address@hidden) at migration/colo..c:215
+＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞ ＞ migration/colo.c:546
+＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞ ＞ migration/colo.c:649
+＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞ --
+＞ ＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞ ＞
+＞ ＞
+＞ ＞ --
+＞ ＞ Thanks
+＞ ＞ Zhang Chen
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞
+
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+     }
+
+
+ 
+
+
+     trace_migration_socket_incoming_accepted()
+
+
+    
+
+
+     qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+     migration_channel_process_incoming(migrate_get_current(),
+
+
+                                        QIO_CHANNEL(sioc))
+
+
+     object_unref(OBJECT(sioc))
+
+
+
+
+Is this patch ok? 
+
+I have test it . The test could not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人： address@hidden address@hidden
+抄送人： address@hidden address@hidden address@hidden
+日 期 ：2017年03月22日 09:11
+主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
+
+
+
+
+
+On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+＞ * Hailiang Zhang (address@hidden) wrote:
+＞＞ Hi,
+＞＞
+＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+＞＞
+＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+＞＞ case COLO thread/incoming thread is stuck in read/write() while do failover,
+＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
+＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
+＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+＞＞
+＞＞ Cc: Dr. David Alan Gilbert address@hidden
+＞＞
+＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
+＞＞ if we tried to cancel migration.
+＞＞
+＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
+Error **errp)
+＞＞ {
+＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
+＞＞      migration_channel_connect(s, ioc, NULL)
+＞＞      ... ...
+＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+＞＞ and the
+＞＞ migrate_fd_cancel()
+＞＞ {
+＞＞   ... ...
+＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
+＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
+＞＞      }
+＞＞ }
+＞
+＞ (cc'd in Daniel Berrange).
+＞ I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN) 
+at the
+＞ top of qio_channel_socket_new  so I think that's safe isn't it?
+＞
+
+Hmm, you are right, this problem is only exist for the migration incoming fd, 
+thanks.
+
+＞ Dave
+＞
+＞＞ Thanks,
+＞＞ Hailiang
+＞＞
+＞＞ On 2017/3/21 16:10, address@hidden wrote:
+＞＞＞ Thank you。
+＞＞＞
+＞＞＞ I have test aready。
+＞＞＞
+＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
+＞＞＞
+＞＞＞ Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node 
+qemu will not produce the problem,but Primary Node panic can。
+＞＞＞
+＞＞＞ I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+＞＞＞
+＞＞＞
+＞＞＞ when failover,channel_shutdown could not shut down the channel.
+＞＞＞
+＞＞＞
+＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
+＞＞＞
+＞＞＞
+＞＞＞ I test a patch:
+＞＞＞
+＞＞＞
+＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ index 13966f1..d65a0ea 100644
+＞＞＞
+＞＞＞
+＞＞＞ --- a/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ +++ b/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞＞＞
+＞＞＞
+＞＞＞        }
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞        trace_migration_socket_incoming_accepted()
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+＞＞＞
+＞＞＞
+＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞＞＞
+＞＞＞
+＞＞＞        migration_channel_process_incoming(migrate_get_current(),
+＞＞＞
+＞＞＞
+＞＞＞                                           QIO_CHANNEL(sioc))
+＞＞＞
+＞＞＞
+＞＞＞        object_unref(OBJECT(sioc))
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ My test will not hang any more.
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ 原始邮件
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ 发件人： address@hidden
+＞＞＞ 收件人：王广10165992 address@hidden
+＞＞＞ 抄送人： address@hidden address@hidden
+＞＞＞ 日 期 ：2017年03月21日 15:58
+＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ Hi,Wang.
+＞＞＞
+＞＞＞ You can test this branch:
+＞＞＞
+＞＞＞
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+＞＞＞
+＞＞＞ and please follow wiki ensure your own configuration correctly.
+＞＞＞
+＞＞＞
+http://wiki.qemu-project.org/Features/COLO
+＞＞＞
+＞＞＞
+＞＞＞ Thanks
+＞＞＞
+＞＞＞ Zhang Chen
+＞＞＞
+＞＞＞
+＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
+＞＞＞ ＞
+＞＞＞ ＞ hi.
+＞＞＞ ＞
+＞＞＞ ＞ I test the git qemu master have the same problem.
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) bt
+＞＞＞ ＞
+＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞＞＞ ＞
+＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞＞＞ ＞ (address@hidden, address@hidden "",
+＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
+＞＞＞ ＞
+＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞＞＞ ＞ migration/qemu-file-channel.c:78
+＞＞＞ ＞
+＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞＞＞ ＞ migration/qemu-file.c:295
+＞＞＞ ＞
+＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
+＞＞＞ ＞
+＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞＞＞ ＞ migration/qemu-file.c:568
+＞＞＞ ＞
+＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞＞＞ ＞ migration/qemu-file.c:648
+＞＞＞ ＞
+＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞＞＞ ＞ address@hidden) at migration/colo.c:244
+＞＞＞ ＞
+＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞＞＞ ＞ out＞, address@hidden,
+＞＞＞ ＞ address@hidden)
+＞＞＞ ＞
+＞＞＞ ＞     at migration/colo.c:264
+＞＞＞ ＞
+＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞＞＞ ＞
+＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞＞＞ ＞
+＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞name
+＞＞＞ ＞
+＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞＞＞ ＞
+＞＞＞ ＞ $3 = 0
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) bt
+＞＞＞ ＞
+＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞＞＞ ＞
+＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞＞＞ ＞ gmain.c:3054
+＞＞＞ ＞
+＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞＞＞ ＞ address@hidden) at gmain.c:3630
+＞＞＞ ＞
+＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞＞＞ ＞
+＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞＞＞ ＞ util/main-loop.c:258
+＞＞＞ ＞
+＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
+＞＞＞ ＞ util/main-loop.c:506
+＞＞＞ ＞
+＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞＞＞ ＞
+＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞＞＞ ＞ out＞) at vl.c:4709
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞features
+＞＞＞ ＞
+＞＞＞ ＞ $1 = 6
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞name
+＞＞＞ ＞
+＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ May be socket_accept_incoming_migration should
+＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ thank you.
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ 原始邮件
+＞＞＞ ＞ address@hidden
+＞＞＞ ＞ address@hidden
+＞＞＞ ＞ address@hidden@huawei.com＞
+＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
+＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞＞＞ ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
+＞＞＞ ＞ ＞ Do the colo have any plan for development?
+＞＞＞ ＞
+＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
+＞＞＞ ＞
+＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞＞＞ ＞
+＞＞＞ ＞ In our internal version can run it successfully,
+＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
+＞＞＞ ＞ Next time if you have some question about COLO,
+＞＞＞ ＞ please cc me and zhanghailiang address@hidden
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ Thanks
+＞＞＞ ＞ Zhang Chen
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
+＞＞＞ ＞ ＞ (gdb) bt
+＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) 
+at
+＞＞＞ ＞ ＞ io/channel-socket.c:497
+＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞＞＞ ＞ ＞ address@hidden "", address@hidden,
+＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
+＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
+＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:257
+＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:523
+＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:603
+＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
+＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞＞＞ ＞ ＞ migration/colo.c:546
+＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞＞＞ ＞ ＞ migration/colo.c:649
+＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ --
+＞＞＞ ＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ --
+＞＞＞ ＞ Thanks
+＞＞＞ ＞ Zhang Chen
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞
+＞＞
+＞ --
+＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
+＞
+＞ .
+＞
+
+Hi,
+
+On 2017/3/22 9:42, address@hidden wrote:
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+      }
+
+
+
+
+
+      trace_migration_socket_incoming_accepted()
+
+
+
+
+
+      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+      migration_channel_process_incoming(migrate_get_current(),
+
+
+                                         QIO_CHANNEL(sioc))
+
+
+      object_unref(OBJECT(sioc))
+
+
+
+
+Is this patch ok?
+Yes, i think this works, but a better way maybe to call 
+qio_channel_set_feature()
+in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
+socket accept fd,
+Or fix it by this:
+
+diff --git a/io/channel-socket.c b/io/channel-socket.c
+index f546c68..ce6894c 100644
+--- a/io/channel-socket.c
++++ b/io/channel-socket.c
+@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
+                           Error **errp)
+ {
+     QIOChannelSocket *cioc;
+-
+-    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET));
+-    cioc->fd = -1;
++
++    cioc = qio_channel_socket_new();
+     cioc->remoteAddrLen = sizeof(ioc->remoteAddr);
+     cioc->localAddrLen = sizeof(ioc->localAddr);
+
+
+Thanks,
+Hailiang
+I have test it . The test could not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人： address@hidden address@hidden
+抄送人： address@hidden address@hidden address@hidden
+日 期 ：2017年03月22日 09:11
+主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
+
+
+
+
+
+On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+＞ * Hailiang Zhang (address@hidden) wrote:
+＞＞ Hi,
+＞＞
+＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+＞＞
+＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+＞＞ case COLO thread/incoming thread is stuck in read/write() while do failover,
+＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
+＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
+＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+＞＞
+＞＞ Cc: Dr. David Alan Gilbert address@hidden
+＞＞
+＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
+＞＞ if we tried to cancel migration.
+＞＞
+＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
+Error **errp)
+＞＞ {
+＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
+＞＞      migration_channel_connect(s, ioc, NULL)
+＞＞      ... ...
+＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+＞＞ and the
+＞＞ migrate_fd_cancel()
+＞＞ {
+＞＞   ... ...
+＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
+＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
+＞＞      }
+＞＞ }
+＞
+＞ (cc'd in Daniel Berrange).
+＞ I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN) 
+at the
+＞ top of qio_channel_socket_new  so I think that's safe isn't it?
+＞
+
+Hmm, you are right, this problem is only exist for the migration incoming fd, 
+thanks.
+
+＞ Dave
+＞
+＞＞ Thanks,
+＞＞ Hailiang
+＞＞
+＞＞ On 2017/3/21 16:10, address@hidden wrote:
+＞＞＞ Thank you。
+＞＞＞
+＞＞＞ I have test aready。
+＞＞＞
+＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same place。
+＞＞＞
+＞＞＞ Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node 
+qemu will not produce the problem,but Primary Node panic can。
+＞＞＞
+＞＞＞ I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+＞＞＞
+＞＞＞
+＞＞＞ when failover,channel_shutdown could not shut down the channel.
+＞＞＞
+＞＞＞
+＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
+＞＞＞
+＞＞＞
+＞＞＞ I test a patch:
+＞＞＞
+＞＞＞
+＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ index 13966f1..d65a0ea 100644
+＞＞＞
+＞＞＞
+＞＞＞ --- a/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ +++ b/migration/socket.c
+＞＞＞
+＞＞＞
+＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞＞＞
+＞＞＞
+＞＞＞        }
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞        trace_migration_socket_incoming_accepted()
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+＞＞＞
+＞＞＞
+＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞＞＞
+＞＞＞
+＞＞＞        migration_channel_process_incoming(migrate_get_current(),
+＞＞＞
+＞＞＞
+＞＞＞                                           QIO_CHANNEL(sioc))
+＞＞＞
+＞＞＞
+＞＞＞        object_unref(OBJECT(sioc))
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ My test will not hang any more.
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ 原始邮件
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ 发件人： address@hidden
+＞＞＞ 收件人：王广10165992 address@hidden
+＞＞＞ 抄送人： address@hidden address@hidden
+＞＞＞ 日 期 ：2017年03月21日 15:58
+＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞
+＞＞＞ Hi,Wang.
+＞＞＞
+＞＞＞ You can test this branch:
+＞＞＞
+＞＞＞
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+＞＞＞
+＞＞＞ and please follow wiki ensure your own configuration correctly.
+＞＞＞
+＞＞＞
+http://wiki.qemu-project.org/Features/COLO
+＞＞＞
+＞＞＞
+＞＞＞ Thanks
+＞＞＞
+＞＞＞ Zhang Chen
+＞＞＞
+＞＞＞
+＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
+＞＞＞ ＞
+＞＞＞ ＞ hi.
+＞＞＞ ＞
+＞＞＞ ＞ I test the git qemu master have the same problem.
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) bt
+＞＞＞ ＞
+＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞＞＞ ＞
+＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞＞＞ ＞ (address@hidden, address@hidden "",
+＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
+＞＞＞ ＞
+＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞＞＞ ＞ migration/qemu-file-channel.c:78
+＞＞＞ ＞
+＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞＞＞ ＞ migration/qemu-file.c:295
+＞＞＞ ＞
+＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
+＞＞＞ ＞
+＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞＞＞ ＞ migration/qemu-file.c:568
+＞＞＞ ＞
+＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞＞＞ ＞ migration/qemu-file.c:648
+＞＞＞ ＞
+＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞＞＞ ＞ address@hidden) at migration/colo.c:244
+＞＞＞ ＞
+＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞＞＞ ＞ out＞, address@hidden,
+＞＞＞ ＞ address@hidden)
+＞＞＞ ＞
+＞＞＞ ＞     at migration/colo.c:264
+＞＞＞ ＞
+＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞＞＞ ＞
+＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞＞＞ ＞
+＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞name
+＞＞＞ ＞
+＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞＞＞ ＞
+＞＞＞ ＞ $3 = 0
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) bt
+＞＞＞ ＞
+＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞＞＞ ＞
+＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞＞＞ ＞ gmain.c:3054
+＞＞＞ ＞
+＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞＞＞ ＞ address@hidden) at gmain.c:3630
+＞＞＞ ＞
+＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞＞＞ ＞
+＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞＞＞ ＞ util/main-loop.c:258
+＞＞＞ ＞
+＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
+＞＞＞ ＞ util/main-loop.c:506
+＞＞＞ ＞
+＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞＞＞ ＞
+＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞＞＞ ＞ out＞) at vl.c:4709
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞features
+＞＞＞ ＞
+＞＞＞ ＞ $1 = 6
+＞＞＞ ＞
+＞＞＞ ＞ (gdb) p ioc-＞name
+＞＞＞ ＞
+＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ May be socket_accept_incoming_migration should
+＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ thank you.
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ 原始邮件
+＞＞＞ ＞ address@hidden
+＞＞＞ ＞ address@hidden
+＞＞＞ ＞ address@hidden@huawei.com＞
+＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
+＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞＞＞ ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
+＞＞＞ ＞ ＞ Do the colo have any plan for development?
+＞＞＞ ＞
+＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
+＞＞＞ ＞
+＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞＞＞ ＞
+＞＞＞ ＞ In our internal version can run it successfully,
+＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
+＞＞＞ ＞ Next time if you have some question about COLO,
+＞＞＞ ＞ please cc me and zhanghailiang address@hidden
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ Thanks
+＞＞＞ ＞ Zhang Chen
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
+＞＞＞ ＞ ＞ (gdb) bt
+＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) 
+at
+＞＞＞ ＞ ＞ io/channel-socket.c:497
+＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞＞＞ ＞ ＞ address@hidden "", address@hidden,
+＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
+＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
+＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:257
+＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:523
+＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞＞＞ ＞ ＞ migration/qemu-file.c:603
+＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
+＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞＞＞ ＞ ＞ migration/colo.c:546
+＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞＞＞ ＞ ＞ migration/colo.c:649
+＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞ --
+＞＞＞ ＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞ --
+＞＞＞ ＞ Thanks
+＞＞＞ ＞ Zhang Chen
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞ ＞
+＞＞＞
+＞＞
+＞ --
+＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
+＞
+＞ .
+＞
+
diff --git a/results/classifier/zero-shot/010/review/59540920 b/results/classifier/zero-shot/010/review/59540920
new file mode 100644
index 00000000..605fe0c9
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/59540920
@@ -0,0 +1,400 @@
+other: 0.989
+files: 0.987
+permissions: 0.986
+graphic: 0.985
+debug: 0.985
+device: 0.985
+semantic: 0.985
+socket: 0.983
+performance: 0.983
+PID: 0.982
+network: 0.981
+boot: 0.980
+vnc: 0.977
+KVM: 0.970
+KVM: 0.913
+boot: 0.770
+debug: 0.662
+files: 0.088
+socket: 0.078
+PID: 0.056
+other: 0.050
+vnc: 0.040
+performance: 0.037
+device: 0.034
+network: 0.024
+semantic: 0.013
+permissions: 0.006
+graphic: 0.005
+
+[BUG] No irqchip created after commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property")
+
+I apologize if this was already reported,
+
+I just noticed that with the latest updates QEMU doesn't start with the
+following configuration:
+
+qemu-system-x86_64 -name guest=win10 -machine pc,accel=kvm -cpu 
+host,hv_vpindex,hv_synic ...
+
+qemu-system-x86_64: failed to turn on HyperV SynIC in KVM: Invalid argument
+qemu-system-x86_64: kvm_init_vcpu failed: Invalid argument
+
+If I add 'kernel-irqchip=split' or ',kernel-irqchip=on' it starts as
+usual. I bisected this to the following commit:
+
+commit 11bc4a13d1f4b07dafbd1dda4d4bf0fdd7ad65f2 (HEAD, refs/bisect/bad)
+Author: Paolo Bonzini <address@hidden>
+Date:   Wed Nov 13 10:56:53 2019 +0100
+
+    kvm: convert "-machine kernel_irqchip" to an accelerator property
+    
+so aparently we now default to 'kernel_irqchip=off'. Is this the desired
+behavior?
+
+-- 
+Vitaly
+
+No, absolutely not. I was sure I had tested it, but I will take a look.
+Paolo
+Il ven 20 dic 2019, 15:11 Vitaly Kuznetsov <
+address@hidden
+> ha scritto:
+I apologize if this was already reported,
+I just noticed that with the latest updates QEMU doesn't start with the
+following configuration:
+qemu-system-x86_64 -name guest=win10 -machine pc,accel=kvm -cpu host,hv_vpindex,hv_synic ...
+qemu-system-x86_64: failed to turn on HyperV SynIC in KVM: Invalid argument
+qemu-system-x86_64: kvm_init_vcpu failed: Invalid argument
+If I add 'kernel-irqchip=split' or ',kernel-irqchip=on' it starts as
+usual. I bisected this to the following commit:
+commit 11bc4a13d1f4b07dafbd1dda4d4bf0fdd7ad65f2 (HEAD, refs/bisect/bad)
+Author: Paolo Bonzini <
+address@hidden
+>
+Date:   Wed Nov 13 10:56:53 2019 +0100
+    kvm: convert "-machine kernel_irqchip" to an accelerator property
+so aparently we now default to 'kernel_irqchip=off'. Is this the desired
+behavior?
+--
+Vitaly
+
+Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
+accelerator property") moves kernel_irqchip property from "-machine" to
+"-accel kvm", but it forgets to set the default value of
+kernel_irqchip_allowed and kernel_irqchip_split.
+
+Also cleaning up the three useless members (kernel_irqchip_allowed,
+kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
+
+Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator 
+property")
+Signed-off-by: Xiaoyao Li <address@hidden>
+---
+ accel/kvm/kvm-all.c | 3 +++
+ include/hw/boards.h | 3 ---
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
+index b2f1a5bcb5ef..40f74094f8d3 100644
+--- a/accel/kvm/kvm-all.c
++++ b/accel/kvm/kvm-all.c
+@@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
+ static void kvm_accel_instance_init(Object *obj)
+ {
+     KVMState *s = KVM_STATE(obj);
++    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
+ 
+     s->kvm_shadow_mem = -1;
++    s->kernel_irqchip_allowed = true;
++    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
+ }
+ 
+ static void kvm_accel_class_init(ObjectClass *oc, void *data)
+diff --git a/include/hw/boards.h b/include/hw/boards.h
+index 61f8bb8e5a42..fb1b43d5b972 100644
+--- a/include/hw/boards.h
++++ b/include/hw/boards.h
+@@ -271,9 +271,6 @@ struct MachineState {
+ 
+     /*< public >*/
+ 
+-    bool kernel_irqchip_allowed;
+-    bool kernel_irqchip_required;
+-    bool kernel_irqchip_split;
+     char *dtb;
+     char *dumpdtb;
+     int phandle_start;
+-- 
+2.19.1
+
+Il sab 28 dic 2019, 09:48 Xiaoyao Li <
+address@hidden
+> ha scritto:
+Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
+accelerator property") moves kernel_irqchip property from "-machine" to
+"-accel kvm", but it forgets to set the default value of
+kernel_irqchip_allowed and kernel_irqchip_split.
+Also cleaning up the three useless members (kernel_irqchip_allowed,
+kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
+Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property")
+Signed-off-by: Xiaoyao Li <
+address@hidden
+>
+Please also add a Reported-by line for Vitaly Kuznetsov.
+---
+ accel/kvm/kvm-all.c | 3 +++
+ include/hw/boards.h | 3 ---
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
+index b2f1a5bcb5ef..40f74094f8d3 100644
+--- a/accel/kvm/kvm-all.c
++++ b/accel/kvm/kvm-all.c
+@@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
+ static void kvm_accel_instance_init(Object *obj)
+ {
+     KVMState *s = KVM_STATE(obj);
++    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
+     s->kvm_shadow_mem = -1;
++    s->kernel_irqchip_allowed = true;
++    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
+Can you initialize this from the init_machine method instead of assuming that current_machine has been initialized earlier?
+Thanks for the quick fix!
+Paolo
+ }
+ static void kvm_accel_class_init(ObjectClass *oc, void *data)
+diff --git a/include/hw/boards.h b/include/hw/boards.h
+index 61f8bb8e5a42..fb1b43d5b972 100644
+--- a/include/hw/boards.h
++++ b/include/hw/boards.h
+@@ -271,9 +271,6 @@ struct MachineState {
+     /*< public >*/
+-    bool kernel_irqchip_allowed;
+-    bool kernel_irqchip_required;
+-    bool kernel_irqchip_split;
+     char *dtb;
+     char *dumpdtb;
+     int phandle_start;
+--
+2.19.1
+
+On Sat, 2019-12-28 at 10:02 +0000, Paolo Bonzini wrote:
+>
+>
+>
+Il sab 28 dic 2019, 09:48 Xiaoyao Li <address@hidden> ha scritto:
+>
+> Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
+>
+> accelerator property") moves kernel_irqchip property from "-machine" to
+>
+> "-accel kvm", but it forgets to set the default value of
+>
+> kernel_irqchip_allowed and kernel_irqchip_split.
+>
+>
+>
+> Also cleaning up the three useless members (kernel_irqchip_allowed,
+>
+> kernel_irqchip_required, kernel_irqchip_split) in struct MachineState.
+>
+>
+>
+> Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an
+>
+> accelerator property")
+>
+> Signed-off-by: Xiaoyao Li <address@hidden>
+>
+>
+Please also add a Reported-by line for Vitaly Kuznetsov.
+Sure.
+
+>
+> ---
+>
+>  accel/kvm/kvm-all.c | 3 +++
+>
+>  include/hw/boards.h | 3 ---
+>
+>  2 files changed, 3 insertions(+), 3 deletions(-)
+>
+>
+>
+> diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
+>
+> index b2f1a5bcb5ef..40f74094f8d3 100644
+>
+> --- a/accel/kvm/kvm-all.c
+>
+> +++ b/accel/kvm/kvm-all.c
+>
+> @@ -3044,8 +3044,11 @@ bool kvm_kernel_irqchip_split(void)
+>
+>  static void kvm_accel_instance_init(Object *obj)
+>
+>  {
+>
+>      KVMState *s = KVM_STATE(obj);
+>
+> +    MachineClass *mc = MACHINE_GET_CLASS(current_machine);
+>
+>
+>
+>      s->kvm_shadow_mem = -1;
+>
+> +    s->kernel_irqchip_allowed = true;
+>
+> +    s->kernel_irqchip_split = mc->default_kernel_irqchip_split;
+>
+>
+Can you initialize this from the init_machine method instead of assuming that
+>
+current_machine has been initialized earlier?
+OK, will do it in v2.
+
+>
+Thanks for the quick fix!
+BTW, it seems that this patch makes kernel_irqchip default on to workaround the
+bug. 
+However, when explicitly configuring kernel_irqchip=off, guest still fails
+booting due to "KVM: failed to send PV IPI: -95" with a latest upstream kernel
+ubuntu guest. Any idea about this? 
+
+>
+Paolo
+>
+>  }
+>
+>
+>
+>  static void kvm_accel_class_init(ObjectClass *oc, void *data)
+>
+> diff --git a/include/hw/boards.h b/include/hw/boards.h
+>
+> index 61f8bb8e5a42..fb1b43d5b972 100644
+>
+> --- a/include/hw/boards.h
+>
+> +++ b/include/hw/boards.h
+>
+> @@ -271,9 +271,6 @@ struct MachineState {
+>
+>
+>
+>      /*< public >*/
+>
+>
+>
+> -    bool kernel_irqchip_allowed;
+>
+> -    bool kernel_irqchip_required;
+>
+> -    bool kernel_irqchip_split;
+>
+>      char *dtb;
+>
+>      char *dumpdtb;
+>
+>      int phandle_start;
+
+Il sab 28 dic 2019, 10:24 Xiaoyao Li <
+address@hidden
+> ha scritto:
+BTW, it seems that this patch makes kernel_irqchip default on to workaround the
+bug.
+However, when explicitly configuring kernel_irqchip=off, guest still fails
+booting due to "KVM: failed to send PV IPI: -95" with a latest upstream kernel
+ubuntu guest. Any idea about this?
+We need to clear the PV IPI feature for userspace irqchip. Are you using -cpu host by chance?
+Paolo
+> Paolo
+> >  }
+> >
+> >  static void kvm_accel_class_init(ObjectClass *oc, void *data)
+> > diff --git a/include/hw/boards.h b/include/hw/boards.h
+> > index 61f8bb8e5a42..fb1b43d5b972 100644
+> > --- a/include/hw/boards.h
+> > +++ b/include/hw/boards.h
+> > @@ -271,9 +271,6 @@ struct MachineState {
+> >
+> >      /*< public >*/
+> >
+> > -    bool kernel_irqchip_allowed;
+> > -    bool kernel_irqchip_required;
+> > -    bool kernel_irqchip_split;
+> >      char *dtb;
+> >      char *dumpdtb;
+> >      int phandle_start;
+
+On Sat, 2019-12-28 at 10:57 +0000, Paolo Bonzini wrote:
+>
+>
+>
+Il sab 28 dic 2019, 10:24 Xiaoyao Li <address@hidden> ha scritto:
+>
+> BTW, it seems that this patch makes kernel_irqchip default on to workaround
+>
+> the
+>
+> bug.
+>
+> However, when explicitly configuring kernel_irqchip=off, guest still fails
+>
+> booting due to "KVM: failed to send PV IPI: -95" with a latest upstream
+>
+> kernel
+>
+> ubuntu guest. Any idea about this?
+>
+>
+We need to clear the PV IPI feature for userspace irqchip. Are you using -cpu
+>
+host by chance?
+Yes, I used -cpu host.
+
+After using "-cpu host,-kvm-pv-ipi" with kernel_irqchip=off, it can boot
+successfully.
+
+>
+Paolo
+>
+>
+> > Paolo
+>
+> > >  }
+>
+> > >
+>
+> > >  static void kvm_accel_class_init(ObjectClass *oc, void *data)
+>
+> > > diff --git a/include/hw/boards.h b/include/hw/boards.h
+>
+> > > index 61f8bb8e5a42..fb1b43d5b972 100644
+>
+> > > --- a/include/hw/boards.h
+>
+> > > +++ b/include/hw/boards.h
+>
+> > > @@ -271,9 +271,6 @@ struct MachineState {
+>
+> > >
+>
+> > >      /*< public >*/
+>
+> > >
+>
+> > > -    bool kernel_irqchip_allowed;
+>
+> > > -    bool kernel_irqchip_required;
+>
+> > > -    bool kernel_irqchip_split;
+>
+> > >      char *dtb;
+>
+> > >      char *dumpdtb;
+>
+> > >      int phandle_start;
+>
+>
+
diff --git a/results/classifier/zero-shot/010/review/63565653 b/results/classifier/zero-shot/010/review/63565653
new file mode 100644
index 00000000..41913849
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/63565653
@@ -0,0 +1,73 @@
+other: 0.898
+device: 0.889
+boot: 0.889
+PID: 0.887
+network: 0.861
+debug: 0.855
+performance: 0.834
+KVM: 0.827
+semantic: 0.825
+socket: 0.745
+permissions: 0.739
+graphic: 0.734
+files: 0.705
+vnc: 0.588
+debug: 0.927
+files: 0.064
+PID: 0.045
+performance: 0.024
+other: 0.013
+device: 0.012
+boot: 0.007
+network: 0.006
+semantic: 0.003
+vnc: 0.002
+graphic: 0.002
+KVM: 0.001
+socket: 0.001
+permissions: 0.001
+
+[Qemu-devel] [BUG]pcibus_reset assertion failure on guest reboot
+
+Qemu-2.6.2
+
+Start a vm with vhost-net , do reboot and hot-unplug viritio-net nic in short 
+time, we touch 
+pcibus_reset assertion failure.
+
+Here is qemu log:
+22:29:46.359386+08:00  acpi_pm1_cnt_write -> guest do soft power off
+22:29:46.785310+08:00  qemu_devices_reset
+22:29:46.788093+08:00  virtio_pci_device_unplugged -> virtio net unpluged
+22:29:46.803427+08:00  pcibus_reset: Assertion `bus->irq_count[i] == 0' failed.
+
+Here is stack info: 
+(gdb) bt
+#0  0x00007f9a336795d7 in raise () from /usr/lib64/libc.so.6
+#1  0x00007f9a3367acc8 in abort () from /usr/lib64/libc.so.6
+#2  0x00007f9a33672546 in __assert_fail_base () from /usr/lib64/libc.so.6
+#3  0x00007f9a336725f2 in __assert_fail () from /usr/lib64/libc.so.6
+#4  0x0000000000641884 in pcibus_reset (qbus=0x29eee60) at hw/pci/pci.c:283
+#5  0x00000000005bfc30 in qbus_reset_one (bus=0x29eee60, opaque=<optimized 
+out>) at hw/core/qdev.c:319
+#6  0x00000000005c1b19 in qdev_walk_children (dev=0x29ed2b0, pre_devfn=0x0, 
+pre_busfn=0x0, post_devfn=0x5c2440 ...
+#7  0x00000000005c1c59 in qbus_walk_children (bus=0x2736f80, pre_devfn=0x0, 
+pre_busfn=0x0, post_devfn=0x5c2440 ...
+#8  0x00000000005513f5 in qemu_devices_reset () at vl.c:1998
+#9  0x00000000004cab9d in pc_machine_reset () at 
+/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/i386/pc.c:1976
+#10 0x000000000055148b in qemu_system_reset (address@hidden) at vl.c:2011
+#11 0x000000000055164f in main_loop_should_exit () at vl.c:2169
+#12 0x0000000000551719 in main_loop () at vl.c:2212
+#13 0x000000000041c9a8 in main (argc=<optimized out>, argv=<optimized out>, 
+envp=<optimized out>) at vl.c:5130
+(gdb) f 4
+...
+(gdb) p bus->irq_count[0]
+$6 = 1
+
+Seems pci_update_irq_disabled doesn't work well
+
+can anyone help?
+
diff --git a/results/classifier/zero-shot/010/review/64322995 b/results/classifier/zero-shot/010/review/64322995
new file mode 100644
index 00000000..59a559ca
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/64322995
@@ -0,0 +1,78 @@
+files: 0.941
+performance: 0.939
+device: 0.915
+network: 0.914
+semantic: 0.906
+graphic: 0.904
+other: 0.881
+PID: 0.875
+socket: 0.866
+debug: 0.837
+permissions: 0.835
+vnc: 0.801
+boot: 0.780
+KVM: 0.742
+debug: 0.886
+performance: 0.705
+boot: 0.569
+PID: 0.125
+other: 0.070
+files: 0.067
+device: 0.053
+socket: 0.031
+network: 0.031
+vnc: 0.029
+semantic: 0.013
+graphic: 0.008
+permissions: 0.004
+KVM: 0.001
+
+[Qemu-devel] [BUG] trace: QEMU hangs on initialization with the	"simple" backend
+
+While starting the softmmu version of QEMU, the simple backend waits for the
+writeout thread to signal a condition variable when initializing the output file
+path. But since the writeout thread has not been created, it just waits forever.
+
+Thanks,
+  Lluis
+
+On Tue, Feb 09, 2016 at 09:24:04PM +0100, Lluís Vilanova wrote:
+>
+While starting the softmmu version of QEMU, the simple backend waits for the
+>
+writeout thread to signal a condition variable when initializing the output
+>
+file
+>
+path. But since the writeout thread has not been created, it just waits
+>
+forever.
+Denis Lunev posted a fix:
+https://patchwork.ozlabs.org/patch/580968/
+Stefan
+signature.asc
+Description:
+PGP signature
+
+Stefan Hajnoczi writes:
+
+>
+On Tue, Feb 09, 2016 at 09:24:04PM +0100, Lluís Vilanova wrote:
+>
+> While starting the softmmu version of QEMU, the simple backend waits for the
+>
+> writeout thread to signal a condition variable when initializing the output
+>
+> file
+>
+> path. But since the writeout thread has not been created, it just waits
+>
+> forever.
+>
+Denis Lunev posted a fix:
+>
+https://patchwork.ozlabs.org/patch/580968/
+Great, thanks.
+
+Lluis
+
diff --git a/results/classifier/zero-shot/010/review/65781993 b/results/classifier/zero-shot/010/review/65781993
new file mode 100644
index 00000000..53d3b784
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/65781993
@@ -0,0 +1,2817 @@
+other: 0.727
+PID: 0.673
+debug: 0.673
+semantic: 0.665
+graphic: 0.664
+socket: 0.660
+permissions: 0.658
+network: 0.657
+files: 0.657
+device: 0.647
+performance: 0.636
+boot: 0.635
+KVM: 0.627
+vnc: 0.590
+debug: 0.668
+socket: 0.188
+files: 0.071
+performance: 0.053
+network: 0.043
+other: 0.017
+device: 0.010
+permissions: 0.009
+PID: 0.008
+semantic: 0.006
+boot: 0.003
+vnc: 0.002
+graphic: 0.002
+KVM: 0.001
+
+[Qemu-devel] 答复: Re:   答复: Re:  [BUG]COLO failover hang
+
+Thank you。
+
+I have test aready。
+
+When the Primary Node panic,the Secondary Node qemu hang at the same place。
+
+Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node qemu 
+will not produce the problem,but Primary Node panic can。
+
+I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+
+
+when failover,channel_shutdown could not shut down the channel.
+
+
+so the colo_process_incoming_thread will hang at recvmsg.
+
+
+I test a patch:
+
+
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+     }
+
+
+ 
+
+
+     trace_migration_socket_incoming_accepted()
+
+
+    
+
+
+     qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+     migration_channel_process_incoming(migrate_get_current(),
+
+
+                                        QIO_CHANNEL(sioc))
+
+
+     object_unref(OBJECT(sioc))
+
+
+
+
+My test will not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月21日 15:58
+主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+
+
+
+
+
+Hi,Wang.
+
+You can test this branch:
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+and please follow wiki ensure your own configuration correctly.
+http://wiki.qemu-project.org/Features/COLO
+Thanks
+
+Zhang Chen
+
+
+On 03/21/2017 03:27 PM, address@hidden wrote:
+＞
+＞ hi.
+＞
+＞ I test the git qemu master have the same problem.
+＞
+＞ (gdb) bt
+＞
+＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880, 
+＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞
+＞ #1  0x00007f658e4aa0c2 in qio_channel_read 
+＞ (address@hidden, address@hidden "", 
+＞ address@hidden, address@hidden) at io/channel.c:114
+＞
+＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞, 
+＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at 
+＞ migration/qemu-file-channel.c:78
+＞
+＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at 
+＞ migration/qemu-file.c:295
+＞
+＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden, 
+＞ address@hidden) at migration/qemu-file.c:555
+＞
+＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at 
+＞ migration/qemu-file.c:568
+＞
+＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at 
+＞ migration/qemu-file.c:648
+＞
+＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800, 
+＞ address@hidden) at migration/colo.c:244
+＞
+＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized 
+＞ out＞, address@hidden, 
+＞ address@hidden)
+＞
+＞     at migration/colo.c:264
+＞
+＞ #9  0x00007f658e3e740e in colo_process_incoming_thread 
+＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞
+＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞
+＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞
+＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞
+＞ $3 = 0
+＞
+＞
+＞ (gdb) bt
+＞
+＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90, 
+＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞
+＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at 
+＞ gmain.c:3054
+＞
+＞ #2  g_main_context_dispatch (context=＜optimized out＞, 
+＞ address@hidden) at gmain.c:3630
+＞
+＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞
+＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at 
+＞ util/main-loop.c:258
+＞
+＞ #5  main_loop_wait (address@hidden) at 
+＞ util/main-loop.c:506
+＞
+＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞
+＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized 
+＞ out＞) at vl.c:4709
+＞
+＞ (gdb) p ioc-＞features
+＞
+＞ $1 = 6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞
+＞
+＞ May be socket_accept_incoming_migration should 
+＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞
+＞
+＞ thank you.
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞ address@hidden
+＞ address@hidden
+＞ address@hidden@huawei.com＞
+＞ *日 期 ：*2017年03月16日 14:46
+＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞
+＞
+＞
+＞
+＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞
+＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞
+＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞ Do the colo have any plan for development?
+＞
+＞ Yes, We are developing. You can see some of patch we pushing.
+＞
+＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞
+＞ In our internal version can run it successfully,
+＞ The failover detail you can ask Zhanghailiang for help.
+＞ Next time if you have some question about COLO,
+＞ please cc me and zhanghailiang address@hidden
+＞
+＞
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ centos7.2+qemu2.7.50
+＞ ＞ (gdb) bt
+＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ ＞ io/channel-socket.c:497
+＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞ address@hidden "", address@hidden,
+＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞ migration/qemu-file.c:257
+＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞ migration/qemu-file.c:523
+＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞ migration/qemu-file.c:603
+＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞ migration/colo.c:546
+＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞ migration/colo.c:649
+＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ --
+＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞
+＞ -- 
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞
+＞
+＞
+
+-- 
+Thanks
+Zhang Chen
+
+Hi,
+
+On 2017/3/21 16:10, address@hidden wrote:
+Thank you。
+
+I have test aready。
+
+When the Primary Node panic,the Secondary Node qemu hang at the same place。
+
+Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node qemu 
+will not produce the problem,but Primary Node panic can。
+
+I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+Yes, you are right, when we do failover for primary/secondary VM, we will 
+shutdown the related
+fd in case it is stuck in the read/write fd.
+
+It seems that you didn't follow the above introduction exactly to do the test. 
+Could you
+share your test procedures ? Especially the commands used in the test.
+
+Thanks,
+Hailiang
+when failover,channel_shutdown could not shut down the channel.
+
+
+so the colo_process_incoming_thread will hang at recvmsg.
+
+
+I test a patch:
+
+
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+      }
+
+
+
+
+
+      trace_migration_socket_incoming_accepted()
+
+
+
+
+
+      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+      migration_channel_process_incoming(migrate_get_current(),
+
+
+                                         QIO_CHANNEL(sioc))
+
+
+      object_unref(OBJECT(sioc))
+
+
+
+
+My test will not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月21日 15:58
+主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+
+
+
+
+
+Hi,Wang.
+
+You can test this branch:
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+and please follow wiki ensure your own configuration correctly.
+http://wiki.qemu-project.org/Features/COLO
+Thanks
+
+Zhang Chen
+
+
+On 03/21/2017 03:27 PM, address@hidden wrote:
+＞
+＞ hi.
+＞
+＞ I test the git qemu master have the same problem.
+＞
+＞ (gdb) bt
+＞
+＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞
+＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ (address@hidden, address@hidden "",
+＞ address@hidden, address@hidden) at io/channel.c:114
+＞
+＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ migration/qemu-file-channel.c:78
+＞
+＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ migration/qemu-file.c:295
+＞
+＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ address@hidden) at migration/qemu-file.c:555
+＞
+＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ migration/qemu-file.c:568
+＞
+＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ migration/qemu-file.c:648
+＞
+＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ address@hidden) at migration/colo.c:244
+＞
+＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ out＞, address@hidden,
+＞ address@hidden)
+＞
+＞     at migration/colo.c:264
+＞
+＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞
+＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞
+＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞
+＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞
+＞ $3 = 0
+＞
+＞
+＞ (gdb) bt
+＞
+＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞
+＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ gmain.c:3054
+＞
+＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ address@hidden) at gmain.c:3630
+＞
+＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞
+＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ util/main-loop.c:258
+＞
+＞ #5  main_loop_wait (address@hidden) at
+＞ util/main-loop.c:506
+＞
+＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞
+＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ out＞) at vl.c:4709
+＞
+＞ (gdb) p ioc-＞features
+＞
+＞ $1 = 6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞
+＞
+＞ May be socket_accept_incoming_migration should
+＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞
+＞
+＞ thank you.
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞ address@hidden
+＞ address@hidden
+＞ address@hidden@huawei.com＞
+＞ *日 期 ：*2017年03月16日 14:46
+＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞
+＞
+＞
+＞
+＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞
+＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞
+＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞ Do the colo have any plan for development?
+＞
+＞ Yes, We are developing. You can see some of patch we pushing.
+＞
+＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞
+＞ In our internal version can run it successfully,
+＞ The failover detail you can ask Zhanghailiang for help.
+＞ Next time if you have some question about COLO,
+＞ please cc me and zhanghailiang address@hidden
+＞
+＞
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ centos7.2+qemu2.7.50
+＞ ＞ (gdb) bt
+＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ ＞ io/channel-socket.c:497
+＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞ address@hidden "", address@hidden,
+＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞ migration/qemu-file.c:257
+＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞ migration/qemu-file.c:523
+＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞ migration/qemu-file.c:603
+＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞ migration/colo.c:546
+＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞ migration/colo.c:649
+＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ --
+＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞
+＞ --
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞
+＞
+＞
+
+Hi,
+
+Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+
+Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+case COLO thread/incoming thread is stuck in read/write() while do failover,
+but it didn't take effect, because all the fd used by COLO (also migration)
+has been wrapped by qio channel, and it will not call the shutdown API if
+we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+
+Cc: Dr. David Alan Gilbert <address@hidden>
+
+I doubted migration cancel has the same problem, it may be stuck in write()
+if we tried to cancel migration.
+
+void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error 
+**errp)
+{
+    qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
+    migration_channel_connect(s, ioc, NULL);
+    ... ...
+We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+and the
+migrate_fd_cancel()
+{
+ ... ...
+    if (s->state == MIGRATION_STATUS_CANCELLING && f) {
+        qemu_file_shutdown(f);  --> This will not take effect. No ?
+    }
+}
+
+Thanks,
+Hailiang
+
+On 2017/3/21 16:10, address@hidden wrote:
+Thank you。
+
+I have test aready。
+
+When the Primary Node panic,the Secondary Node qemu hang at the same place。
+
+Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node qemu 
+will not produce the problem,but Primary Node panic can。
+
+I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+
+
+when failover,channel_shutdown could not shut down the channel.
+
+
+so the colo_process_incoming_thread will hang at recvmsg.
+
+
+I test a patch:
+
+
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+      }
+
+
+
+
+
+      trace_migration_socket_incoming_accepted()
+
+
+
+
+
+      qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+      migration_channel_process_incoming(migrate_get_current(),
+
+
+                                         QIO_CHANNEL(sioc))
+
+
+      object_unref(OBJECT(sioc))
+
+
+
+
+My test will not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月21日 15:58
+主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+
+
+
+
+
+Hi,Wang.
+
+You can test this branch:
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+and please follow wiki ensure your own configuration correctly.
+http://wiki.qemu-project.org/Features/COLO
+Thanks
+
+Zhang Chen
+
+
+On 03/21/2017 03:27 PM, address@hidden wrote:
+＞
+＞ hi.
+＞
+＞ I test the git qemu master have the same problem.
+＞
+＞ (gdb) bt
+＞
+＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞
+＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ (address@hidden, address@hidden "",
+＞ address@hidden, address@hidden) at io/channel.c:114
+＞
+＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ migration/qemu-file-channel.c:78
+＞
+＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ migration/qemu-file.c:295
+＞
+＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ address@hidden) at migration/qemu-file.c:555
+＞
+＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ migration/qemu-file.c:568
+＞
+＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ migration/qemu-file.c:648
+＞
+＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ address@hidden) at migration/colo.c:244
+＞
+＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ out＞, address@hidden,
+＞ address@hidden)
+＞
+＞     at migration/colo.c:264
+＞
+＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞
+＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞
+＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞
+＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞
+＞ $3 = 0
+＞
+＞
+＞ (gdb) bt
+＞
+＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞
+＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ gmain.c:3054
+＞
+＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ address@hidden) at gmain.c:3630
+＞
+＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞
+＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ util/main-loop.c:258
+＞
+＞ #5  main_loop_wait (address@hidden) at
+＞ util/main-loop.c:506
+＞
+＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞
+＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ out＞) at vl.c:4709
+＞
+＞ (gdb) p ioc-＞features
+＞
+＞ $1 = 6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞
+＞
+＞ May be socket_accept_incoming_migration should
+＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞
+＞
+＞ thank you.
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞ address@hidden
+＞ address@hidden
+＞ address@hidden@huawei.com＞
+＞ *日 期 ：*2017年03月16日 14:46
+＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞
+＞
+＞
+＞
+＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞
+＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞
+＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞ Do the colo have any plan for development?
+＞
+＞ Yes, We are developing. You can see some of patch we pushing.
+＞
+＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞
+＞ In our internal version can run it successfully,
+＞ The failover detail you can ask Zhanghailiang for help.
+＞ Next time if you have some question about COLO,
+＞ please cc me and zhanghailiang address@hidden
+＞
+＞
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ centos7.2+qemu2.7.50
+＞ ＞ (gdb) bt
+＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ ＞ io/channel-socket.c:497
+＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞ address@hidden "", address@hidden,
+＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞ migration/qemu-file.c:257
+＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞ migration/qemu-file.c:523
+＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞ migration/qemu-file.c:603
+＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞ migration/colo.c:546
+＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞ migration/colo.c:649
+＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ --
+＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞
+＞ --
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞
+＞
+＞
+
+* Hailiang Zhang (address@hidden) wrote:
+>
+Hi,
+>
+>
+Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+>
+>
+Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+>
+case COLO thread/incoming thread is stuck in read/write() while do failover,
+>
+but it didn't take effect, because all the fd used by COLO (also migration)
+>
+has been wrapped by qio channel, and it will not call the shutdown API if
+>
+we didn't qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+>
+>
+Cc: Dr. David Alan Gilbert <address@hidden>
+>
+>
+I doubted migration cancel has the same problem, it may be stuck in write()
+>
+if we tried to cancel migration.
+>
+>
+void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error
+>
+**errp)
+>
+{
+>
+qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
+>
+migration_channel_connect(s, ioc, NULL);
+>
+... ...
+>
+We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+>
+and the
+>
+migrate_fd_cancel()
+>
+{
+>
+... ...
+>
+if (s->state == MIGRATION_STATUS_CANCELLING && f) {
+>
+qemu_file_shutdown(f);  --> This will not take effect. No ?
+>
+}
+>
+}
+(cc'd in Daniel Berrange).
+I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN); 
+at the
+top of qio_channel_socket_new;  so I think that's safe isn't it?
+
+Dave
+
+>
+Thanks,
+>
+Hailiang
+>
+>
+On 2017/3/21 16:10, address@hidden wrote:
+>
+> Thank you。
+>
+>
+>
+> I have test aready。
+>
+>
+>
+> When the Primary Node panic,the Secondary Node qemu hang at the same place。
+>
+>
+>
+> Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node
+>
+> qemu will not produce the problem,but Primary Node panic can。
+>
+>
+>
+> I think due to the feature of channel does not support
+>
+> QIO_CHANNEL_FEATURE_SHUTDOWN.
+>
+>
+>
+>
+>
+> when failover,channel_shutdown could not shut down the channel.
+>
+>
+>
+>
+>
+> so the colo_process_incoming_thread will hang at recvmsg.
+>
+>
+>
+>
+>
+> I test a patch:
+>
+>
+>
+>
+>
+> diff --git a/migration/socket.c b/migration/socket.c
+>
+>
+>
+>
+>
+> index 13966f1..d65a0ea 100644
+>
+>
+>
+>
+>
+> --- a/migration/socket.c
+>
+>
+>
+>
+>
+> +++ b/migration/socket.c
+>
+>
+>
+>
+>
+> @@ -147,8 +147,9 @@ static gboolean
+>
+> socket_accept_incoming_migration(QIOChannel *ioc,
+>
+>
+>
+>
+>
+>       }
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>       trace_migration_socket_incoming_accepted()
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+>
+>
+>
+>
+>
+> +    qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+> QIO_CHANNEL_FEATURE_SHUTDOWN)
+>
+>
+>
+>
+>
+>       migration_channel_process_incoming(migrate_get_current(),
+>
+>
+>
+>
+>
+>                                          QIO_CHANNEL(sioc))
+>
+>
+>
+>
+>
+>       object_unref(OBJECT(sioc))
+>
+>
+>
+>
+>
+>
+>
+>
+>
+> My test will not hang any more.
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+> 原始邮件
+>
+>
+>
+>
+>
+>
+>
+> 发件人： address@hidden
+>
+> 收件人：王广10165992 address@hidden
+>
+> 抄送人： address@hidden address@hidden
+>
+> 日 期 ：2017年03月21日 15:58
+>
+> 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+>
+> Hi,Wang.
+>
+>
+>
+> You can test this branch:
+>
+>
+>
+>
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+>
+>
+>
+> and please follow wiki ensure your own configuration correctly.
+>
+>
+>
+>
+http://wiki.qemu-project.org/Features/COLO
+>
+>
+>
+>
+>
+> Thanks
+>
+>
+>
+> Zhang Chen
+>
+>
+>
+>
+>
+> On 03/21/2017 03:27 PM, address@hidden wrote:
+>
+> ＞
+>
+> ＞ hi.
+>
+> ＞
+>
+> ＞ I test the git qemu master have the same problem.
+>
+> ＞
+>
+> ＞ (gdb) bt
+>
+> ＞
+>
+> ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+>
+> ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+>
+> ＞
+>
+> ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+>
+> ＞ (address@hidden, address@hidden "",
+>
+> ＞ address@hidden, address@hidden) at io/channel.c:114
+>
+> ＞
+>
+> ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+>
+> ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+>
+> ＞ migration/qemu-file-channel.c:78
+>
+> ＞
+>
+> ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+>
+> ＞ migration/qemu-file.c:295
+>
+> ＞
+>
+> ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+>
+> ＞ address@hidden) at migration/qemu-file.c:555
+>
+> ＞
+>
+> ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+>
+> ＞ migration/qemu-file.c:568
+>
+> ＞
+>
+> ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+>
+> ＞ migration/qemu-file.c:648
+>
+> ＞
+>
+> ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+>
+> ＞ address@hidden) at migration/colo.c:244
+>
+> ＞
+>
+> ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+>
+> ＞ out＞, address@hidden,
+>
+> ＞ address@hidden)
+>
+> ＞
+>
+> ＞     at migration/colo.c:264
+>
+> ＞
+>
+> ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+>
+> ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+>
+> ＞
+>
+> ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+>
+> ＞
+>
+> ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+>
+> ＞
+>
+> ＞ (gdb) p ioc-＞name
+>
+> ＞
+>
+> ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+>
+> ＞
+>
+> ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+>
+> ＞
+>
+> ＞ $3 = 0
+>
+> ＞
+>
+> ＞
+>
+> ＞ (gdb) bt
+>
+> ＞
+>
+> ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+>
+> ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+>
+> ＞
+>
+> ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+>
+> ＞ gmain.c:3054
+>
+> ＞
+>
+> ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+>
+> ＞ address@hidden) at gmain.c:3630
+>
+> ＞
+>
+> ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+>
+> ＞
+>
+> ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+>
+> ＞ util/main-loop.c:258
+>
+> ＞
+>
+> ＞ #5  main_loop_wait (address@hidden) at
+>
+> ＞ util/main-loop.c:506
+>
+> ＞
+>
+> ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+>
+> ＞
+>
+> ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+>
+> ＞ out＞) at vl.c:4709
+>
+> ＞
+>
+> ＞ (gdb) p ioc-＞features
+>
+> ＞
+>
+> ＞ $1 = 6
+>
+> ＞
+>
+> ＞ (gdb) p ioc-＞name
+>
+> ＞
+>
+> ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+>
+> ＞
+>
+> ＞
+>
+> ＞ May be socket_accept_incoming_migration should
+>
+> ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+>
+> ＞
+>
+> ＞
+>
+> ＞ thank you.
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞ 原始邮件
+>
+> ＞ address@hidden
+>
+> ＞ address@hidden
+>
+> ＞ address@hidden@huawei.com＞
+>
+> ＞ *日 期 ：*2017年03月16日 14:46
+>
+> ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+>
+> ＞ ＞   am testing QEMU COLO feature described here [QEMU
+>
+> ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+>
+> ＞ ＞
+>
+> ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+>
+> ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+>
+> ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+>
+> ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+>
+> ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+>
+> ＞ ＞
+>
+> ＞ ＞ I found that the colo in qemu is not complete yet.
+>
+> ＞ ＞ Do the colo have any plan for development?
+>
+> ＞
+>
+> ＞ Yes, We are developing. You can see some of patch we pushing.
+>
+> ＞
+>
+> ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+>
+> ＞
+>
+> ＞ In our internal version can run it successfully,
+>
+> ＞ The failover detail you can ask Zhanghailiang for help.
+>
+> ＞ Next time if you have some question about COLO,
+>
+> ＞ please cc me and zhanghailiang address@hidden
+>
+> ＞
+>
+> ＞
+>
+> ＞ Thanks
+>
+> ＞ Zhang Chen
+>
+> ＞
+>
+> ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞ centos7.2+qemu2.7.50
+>
+> ＞ ＞ (gdb) bt
+>
+> ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+>
+> ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+>
+> ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0)
+>
+> at
+>
+> ＞ ＞ io/channel-socket.c:497
+>
+> ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+>
+> ＞ ＞ address@hidden "", address@hidden,
+>
+> ＞ ＞ address@hidden) at io/channel.c:97
+>
+> ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+>
+> ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+>
+> ＞ ＞ migration/qemu-file-channel.c:78
+>
+> ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+>
+> ＞ ＞ migration/qemu-file.c:257
+>
+> ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+>
+> ＞ ＞ address@hidden) at migration/qemu-file.c:510
+>
+> ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+>
+> ＞ ＞ migration/qemu-file.c:523
+>
+> ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+>
+> ＞ ＞ migration/qemu-file.c:603
+>
+> ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+>
+> ＞ ＞ address@hidden) at migration/colo.c:215
+>
+> ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+>
+> ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+>
+> ＞ ＞ migration/colo.c:546
+>
+> ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+>
+> ＞ ＞ migration/colo.c:649
+>
+> ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+>
+> ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞ --
+>
+> ＞ ＞ View this message in context:
+>
+>
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+>
+> ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞ ＞
+>
+> ＞
+>
+> ＞ --
+>
+> ＞ Thanks
+>
+> ＞ Zhang Chen
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+> ＞
+>
+>
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+* Hailiang Zhang (address@hidden) wrote:
+Hi,
+
+Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+
+Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+case COLO thread/incoming thread is stuck in read/write() while do failover,
+but it didn't take effect, because all the fd used by COLO (also migration)
+has been wrapped by qio channel, and it will not call the shutdown API if
+we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+
+Cc: Dr. David Alan Gilbert <address@hidden>
+
+I doubted migration cancel has the same problem, it may be stuck in write()
+if we tried to cancel migration.
+
+void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error 
+**errp)
+{
+     qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
+     migration_channel_connect(s, ioc, NULL);
+     ... ...
+We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+and the
+migrate_fd_cancel()
+{
+  ... ...
+     if (s->state == MIGRATION_STATUS_CANCELLING && f) {
+         qemu_file_shutdown(f);  --> This will not take effect. No ?
+     }
+}
+(cc'd in Daniel Berrange).
+I see that we call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN); 
+at the
+top of qio_channel_socket_new;  so I think that's safe isn't it?
+Hmm, you are right, this problem is only exist for the migration incoming fd, 
+thanks.
+Dave
+Thanks,
+Hailiang
+
+On 2017/3/21 16:10, address@hidden wrote:
+Thank you。
+
+I have test aready。
+
+When the Primary Node panic,the Secondary Node qemu hang at the same place。
+
+Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node qemu 
+will not produce the problem,but Primary Node panic can。
+
+I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+
+
+when failover,channel_shutdown could not shut down the channel.
+
+
+so the colo_process_incoming_thread will hang at recvmsg.
+
+
+I test a patch:
+
+
+diff --git a/migration/socket.c b/migration/socket.c
+
+
+index 13966f1..d65a0ea 100644
+
+
+--- a/migration/socket.c
+
+
++++ b/migration/socket.c
+
+
+@@ -147,8 +147,9 @@ static gboolean socket_accept_incoming_migration(QIOChannel 
+*ioc,
+
+
+       }
+
+
+
+
+
+       trace_migration_socket_incoming_accepted()
+
+
+
+
+
+       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+
+
++    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+
+
+       migration_channel_process_incoming(migrate_get_current(),
+
+
+                                          QIO_CHANNEL(sioc))
+
+
+       object_unref(OBJECT(sioc))
+
+
+
+
+My test will not hang any more.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992 address@hidden
+抄送人： address@hidden address@hidden
+日 期 ：2017年03月21日 15:58
+主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+
+
+
+
+
+Hi,Wang.
+
+You can test this branch:
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+and please follow wiki ensure your own configuration correctly.
+http://wiki.qemu-project.org/Features/COLO
+Thanks
+
+Zhang Chen
+
+
+On 03/21/2017 03:27 PM, address@hidden wrote:
+＞
+＞ hi.
+＞
+＞ I test the git qemu master have the same problem.
+＞
+＞ (gdb) bt
+＞
+＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞
+＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ (address@hidden, address@hidden "",
+＞ address@hidden, address@hidden) at io/channel.c:114
+＞
+＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ migration/qemu-file-channel.c:78
+＞
+＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ migration/qemu-file.c:295
+＞
+＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ address@hidden) at migration/qemu-file.c:555
+＞
+＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ migration/qemu-file.c:568
+＞
+＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ migration/qemu-file.c:648
+＞
+＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ address@hidden) at migration/colo.c:244
+＞
+＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ out＞, address@hidden,
+＞ address@hidden)
+＞
+＞     at migration/colo.c:264
+＞
+＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞
+＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞
+＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞
+＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞
+＞ $3 = 0
+＞
+＞
+＞ (gdb) bt
+＞
+＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞
+＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ gmain.c:3054
+＞
+＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ address@hidden) at gmain.c:3630
+＞
+＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞
+＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ util/main-loop.c:258
+＞
+＞ #5  main_loop_wait (address@hidden) at
+＞ util/main-loop.c:506
+＞
+＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞
+＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ out＞) at vl.c:4709
+＞
+＞ (gdb) p ioc-＞features
+＞
+＞ $1 = 6
+＞
+＞ (gdb) p ioc-＞name
+＞
+＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞
+＞
+＞ May be socket_accept_incoming_migration should
+＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞
+＞
+＞ thank you.
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞ address@hidden
+＞ address@hidden
+＞ address@hidden@huawei.com＞
+＞ *日 期 ：*2017年03月16日 14:46
+＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞
+＞
+＞
+＞
+＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞
+＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞
+＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞ Do the colo have any plan for development?
+＞
+＞ Yes, We are developing. You can see some of patch we pushing.
+＞
+＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞
+＞ In our internal version can run it successfully,
+＞ The failover detail you can ask Zhanghailiang for help.
+＞ Next time if you have some question about COLO,
+＞ please cc me and zhanghailiang address@hidden
+＞
+＞
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ centos7.2+qemu2.7.50
+＞ ＞ (gdb) bt
+＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized out＞,
+＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, errp=0x0) at
+＞ ＞ io/channel-socket.c:497
+＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞ address@hidden "", address@hidden,
+＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞ migration/qemu-file.c:257
+＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞ migration/qemu-file.c:523
+＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞ migration/qemu-file.c:603
+＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message (errp=0x7f3d62bfaa48,
+＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞ migration/colo.c:546
+＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞ migration/colo.c:649
+＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞ --
+＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞
+＞ ＞
+＞ ＞
+＞ ＞
+＞
+＞ --
+＞ Thanks
+＞ Zhang Chen
+＞
+＞
+＞
+＞
+＞
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+.
+
+* Hailiang Zhang (address@hidden) wrote:
+>
+On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+>
+> * Hailiang Zhang (address@hidden) wrote:
+>
+> > Hi,
+>
+> >
+>
+> > Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+>
+> >
+>
+> > Though we tried to call qemu_file_shutdown() to shutdown the related fd,
+>
+> > in
+>
+> > case COLO thread/incoming thread is stuck in read/write() while do
+>
+> > failover,
+>
+> > but it didn't take effect, because all the fd used by COLO (also
+>
+> > migration)
+>
+> > has been wrapped by qio channel, and it will not call the shutdown API if
+>
+> > we didn't qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+> > QIO_CHANNEL_FEATURE_SHUTDOWN).
+>
+> >
+>
+> > Cc: Dr. David Alan Gilbert <address@hidden>
+>
+> >
+>
+> > I doubted migration cancel has the same problem, it may be stuck in
+>
+> > write()
+>
+> > if we tried to cancel migration.
+>
+> >
+>
+> > void fd_start_outgoing_migration(MigrationState *s, const char *fdname,
+>
+> > Error **errp)
+>
+> > {
+>
+> >      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing");
+>
+> >      migration_channel_connect(s, ioc, NULL);
+>
+> >      ... ...
+>
+> > We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+> > QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+>
+> > and the
+>
+> > migrate_fd_cancel()
+>
+> > {
+>
+> >   ... ...
+>
+> >      if (s->state == MIGRATION_STATUS_CANCELLING && f) {
+>
+> >          qemu_file_shutdown(f);  --> This will not take effect. No ?
+>
+> >      }
+>
+> > }
+>
+>
+>
+> (cc'd in Daniel Berrange).
+>
+> I see that we call qio_channel_set_feature(ioc,
+>
+> QIO_CHANNEL_FEATURE_SHUTDOWN); at the
+>
+> top of qio_channel_socket_new;  so I think that's safe isn't it?
+>
+>
+>
+>
+Hmm, you are right, this problem is only exist for the migration incoming fd,
+>
+thanks.
+Yes, and I don't think we normally do a cancel on the incoming side of a 
+migration.
+
+Dave
+
+>
+> Dave
+>
+>
+>
+> > Thanks,
+>
+> > Hailiang
+>
+> >
+>
+> > On 2017/3/21 16:10, address@hidden wrote:
+>
+> > > Thank you。
+>
+> > >
+>
+> > > I have test aready。
+>
+> > >
+>
+> > > When the Primary Node panic,the Secondary Node qemu hang at the same
+>
+> > > place。
+>
+> > >
+>
+> > > Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary
+>
+> > > Node qemu will not produce the problem,but Primary Node panic can。
+>
+> > >
+>
+> > > I think due to the feature of channel does not support
+>
+> > > QIO_CHANNEL_FEATURE_SHUTDOWN.
+>
+> > >
+>
+> > >
+>
+> > > when failover,channel_shutdown could not shut down the channel.
+>
+> > >
+>
+> > >
+>
+> > > so the colo_process_incoming_thread will hang at recvmsg.
+>
+> > >
+>
+> > >
+>
+> > > I test a patch:
+>
+> > >
+>
+> > >
+>
+> > > diff --git a/migration/socket.c b/migration/socket.c
+>
+> > >
+>
+> > >
+>
+> > > index 13966f1..d65a0ea 100644
+>
+> > >
+>
+> > >
+>
+> > > --- a/migration/socket.c
+>
+> > >
+>
+> > >
+>
+> > > +++ b/migration/socket.c
+>
+> > >
+>
+> > >
+>
+> > > @@ -147,8 +147,9 @@ static gboolean
+>
+> > > socket_accept_incoming_migration(QIOChannel *ioc,
+>
+> > >
+>
+> > >
+>
+> > >        }
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >        trace_migration_socket_incoming_accepted()
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >        qio_channel_set_name(QIO_CHANNEL(sioc),
+>
+> > > "migration-socket-incoming")
+>
+> > >
+>
+> > >
+>
+> > > +    qio_channel_set_feature(QIO_CHANNEL(sioc),
+>
+> > > QIO_CHANNEL_FEATURE_SHUTDOWN)
+>
+> > >
+>
+> > >
+>
+> > >        migration_channel_process_incoming(migrate_get_current(),
+>
+> > >
+>
+> > >
+>
+> > >                                           QIO_CHANNEL(sioc))
+>
+> > >
+>
+> > >
+>
+> > >        object_unref(OBJECT(sioc))
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > My test will not hang any more.
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > 原始邮件
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > 发件人： address@hidden
+>
+> > > 收件人：王广10165992 address@hidden
+>
+> > > 抄送人： address@hidden address@hidden
+>
+> > > 日 期 ：2017年03月21日 15:58
+>
+> > > 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > Hi,Wang.
+>
+> > >
+>
+> > > You can test this branch:
+>
+> > >
+>
+> > >
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+>
+> > >
+>
+> > > and please follow wiki ensure your own configuration correctly.
+>
+> > >
+>
+> > >
+http://wiki.qemu-project.org/Features/COLO
+>
+> > >
+>
+> > >
+>
+> > > Thanks
+>
+> > >
+>
+> > > Zhang Chen
+>
+> > >
+>
+> > >
+>
+> > > On 03/21/2017 03:27 PM, address@hidden wrote:
+>
+> > > ＞
+>
+> > > ＞ hi.
+>
+> > > ＞
+>
+> > > ＞ I test the git qemu master have the same problem.
+>
+> > > ＞
+>
+> > > ＞ (gdb) bt
+>
+> > > ＞
+>
+> > > ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+>
+> > > ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+>
+> > > ＞
+>
+> > > ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+>
+> > > ＞ (address@hidden, address@hidden "",
+>
+> > > ＞ address@hidden, address@hidden) at io/channel.c:114
+>
+> > > ＞
+>
+> > > ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+>
+> > > ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+>
+> > > ＞ migration/qemu-file-channel.c:78
+>
+> > > ＞
+>
+> > > ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+>
+> > > ＞ migration/qemu-file.c:295
+>
+> > > ＞
+>
+> > > ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+>
+> > > ＞ address@hidden) at migration/qemu-file.c:555
+>
+> > > ＞
+>
+> > > ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+>
+> > > ＞ migration/qemu-file.c:568
+>
+> > > ＞
+>
+> > > ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+>
+> > > ＞ migration/qemu-file.c:648
+>
+> > > ＞
+>
+> > > ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+>
+> > > ＞ address@hidden) at migration/colo.c:244
+>
+> > > ＞
+>
+> > > ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+>
+> > > ＞ out＞, address@hidden,
+>
+> > > ＞ address@hidden)
+>
+> > > ＞
+>
+> > > ＞     at migration/colo.c:264
+>
+> > > ＞
+>
+> > > ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+>
+> > > ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+>
+> > > ＞
+>
+> > > ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+>
+> > > ＞
+>
+> > > ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+>
+> > > ＞
+>
+> > > ＞ (gdb) p ioc-＞name
+>
+> > > ＞
+>
+> > > ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+>
+> > > ＞
+>
+> > > ＞ (gdb) p ioc-＞features        Do not support
+>
+> > > QIO_CHANNEL_FEATURE_SHUTDOWN
+>
+> > > ＞
+>
+> > > ＞ $3 = 0
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ (gdb) bt
+>
+> > > ＞
+>
+> > > ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+>
+> > > ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+>
+> > > ＞
+>
+> > > ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+>
+> > > ＞ gmain.c:3054
+>
+> > > ＞
+>
+> > > ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+>
+> > > ＞ address@hidden) at gmain.c:3630
+>
+> > > ＞
+>
+> > > ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+>
+> > > ＞
+>
+> > > ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+>
+> > > ＞ util/main-loop.c:258
+>
+> > > ＞
+>
+> > > ＞ #5  main_loop_wait (address@hidden) at
+>
+> > > ＞ util/main-loop.c:506
+>
+> > > ＞
+>
+> > > ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+>
+> > > ＞
+>
+> > > ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+>
+> > > ＞ out＞) at vl.c:4709
+>
+> > > ＞
+>
+> > > ＞ (gdb) p ioc-＞features
+>
+> > > ＞
+>
+> > > ＞ $1 = 6
+>
+> > > ＞
+>
+> > > ＞ (gdb) p ioc-＞name
+>
+> > > ＞
+>
+> > > ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ May be socket_accept_incoming_migration should
+>
+> > > ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ thank you.
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ 原始邮件
+>
+> > > ＞ address@hidden
+>
+> > > ＞ address@hidden
+>
+> > > ＞ address@hidden@huawei.com＞
+>
+> > > ＞ *日 期 ：*2017年03月16日 14:46
+>
+> > > ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+>
+> > > ＞ ＞   am testing QEMU COLO feature described here [QEMU
+>
+> > > ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+>
+> > > ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+>
+> > > ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+>
+> > > ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+>
+> > > ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞ I found that the colo in qemu is not complete yet.
+>
+> > > ＞ ＞ Do the colo have any plan for development?
+>
+> > > ＞
+>
+> > > ＞ Yes, We are developing. You can see some of patch we pushing.
+>
+> > > ＞
+>
+> > > ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+>
+> > > ＞
+>
+> > > ＞ In our internal version can run it successfully,
+>
+> > > ＞ The failover detail you can ask Zhanghailiang for help.
+>
+> > > ＞ Next time if you have some question about COLO,
+>
+> > > ＞ please cc me and zhanghailiang address@hidden
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ Thanks
+>
+> > > ＞ Zhang Chen
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞ centos7.2+qemu2.7.50
+>
+> > > ＞ ＞ (gdb) bt
+>
+> > > ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+>
+> > > ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized
+>
+> > > out＞,
+>
+> > > ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0,
+>
+> > > errp=0x0) at
+>
+> > > ＞ ＞ io/channel-socket.c:497
+>
+> > > ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+>
+> > > ＞ ＞ address@hidden "", address@hidden,
+>
+> > > ＞ ＞ address@hidden) at io/channel.c:97
+>
+> > > ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized
+>
+> > > out＞,
+>
+> > > ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+>
+> > > ＞ ＞ migration/qemu-file-channel.c:78
+>
+> > > ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+>
+> > > ＞ ＞ migration/qemu-file.c:257
+>
+> > > ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+>
+> > > ＞ ＞ address@hidden) at migration/qemu-file.c:510
+>
+> > > ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+>
+> > > ＞ ＞ migration/qemu-file.c:523
+>
+> > > ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+>
+> > > ＞ ＞ migration/qemu-file.c:603
+>
+> > > ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+>
+> > > ＞ ＞ address@hidden) at migration/colo.c:215
+>
+> > > ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message
+>
+> > > (errp=0x7f3d62bfaa48,
+>
+> > > ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+>
+> > > ＞ ＞ migration/colo.c:546
+>
+> > > ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+>
+> > > ＞ ＞ migration/colo.c:649
+>
+> > > ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from
+>
+> > > /lib64/libpthread.so.0
+>
+> > > ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc.so.6
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞ --
+>
+> > > ＞ ＞ View this message in context:
+>
+> > >
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+>
+> > > ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞ ＞
+>
+> > > ＞
+>
+> > > ＞ --
+>
+> > > ＞ Thanks
+>
+> > > ＞ Zhang Chen
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > > ＞
+>
+> > >
+>
+> >
+>
+> --
+>
+> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+>
+> .
+>
+>
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
diff --git a/results/classifier/zero-shot/010/review/66743673 b/results/classifier/zero-shot/010/review/66743673
new file mode 100644
index 00000000..c953d047
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/66743673
@@ -0,0 +1,388 @@
+other: 0.967
+permissions: 0.963
+semantic: 0.951
+PID: 0.949
+debug: 0.945
+boot: 0.938
+files: 0.937
+network: 0.930
+graphic: 0.927
+socket: 0.926
+vnc: 0.926
+device: 0.926
+performance: 0.905
+KVM: 0.891
+debug: 0.421
+files: 0.057
+PID: 0.046
+socket: 0.027
+boot: 0.022
+semantic: 0.016
+device: 0.012
+vnc: 0.012
+other: 0.011
+KVM: 0.008
+performance: 0.005
+network: 0.004
+permissions: 0.002
+graphic: 0.002
+
+[Bug] QEMU TCG warnings after commit c6bd2dd63420 - HTT / CMP_LEG bits
+
+Hi Community,
+
+This email contains 3 bugs appear to share the same root cause.
+
+[1] We ran into the following warnings when running QEMU v10.0.0 in TCG mode:
+
+qemu-system-x86_64 \
+  -machine q35 \
+  -m 4G -smp 4 \
+  -kernel ./arch/x86/boot/bzImage \
+  -bios /usr/share/ovmf/OVMF.fd \
+  -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
+  -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
+  -nographic \
+  -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.01H:EDX.ht [bit 28]
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.80000001H:ECX.cmp-legacy [bit 1]
+(repeats 4 times, once per vCPU)
+Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up CPUID_HT in
+x86_cpu_expand_features() instead of cpu_x86_cpuid()" is what introduced the
+warnings.
+Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28]) and
+CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT support, these
+bits trigger the warnings above.
+[2] Also, Zhao pointed me to a similar report on GitLab:
+https://gitlab.com/qemu-project/qemu/-/issues/2894
+The symptoms there look identical to what we're seeing.
+By convention we file one issue per email, but these two appear to share the
+same root cause, so I'm describing them together here.
+[3] My colleague Alan noticed what appears to be a related problem: if we launch
+a guest with '-cpu <model>,-ht --enable-kvm', which means explicitly removing
+the ht flag, but the guest still reports HT(cat /proc/cpuinfo in linux guest)
+enabled. In other words, under KVM the ht bit seems to be forced on even when
+the user tries to disable it.
+Best regards,
+Ewan
+
+On 4/29/25 11:02 AM, Ewan Hai wrote:
+Hi Community,
+
+This email contains 3 bugs appear to share the same root cause.
+
+[1] We ran into the following warnings when running QEMU v10.0.0 in TCG mode:
+
+qemu-system-x86_64 \
+   -machine q35 \
+   -m 4G -smp 4 \
+   -kernel ./arch/x86/boot/bzImage \
+   -bios /usr/share/ovmf/OVMF.fd \
+   -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
+   -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
+   -nographic \
+   -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.01H:EDX.ht [bit 28]
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.80000001H:ECX.cmp-legacy [bit 1]
+(repeats 4 times, once per vCPU)
+Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up CPUID_HT in
+x86_cpu_expand_features() instead of cpu_x86_cpuid()" is what introduced the
+warnings.
+Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28]) and
+CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT support, these
+bits trigger the warnings above.
+[2] Also, Zhao pointed me to a similar report on GitLab:
+https://gitlab.com/qemu-project/qemu/-/issues/2894
+The symptoms there look identical to what we're seeing.
+By convention we file one issue per email, but these two appear to share the
+same root cause, so I'm describing them together here.
+[3] My colleague Alan noticed what appears to be a related problem: if we launch
+a guest with '-cpu <model>,-ht --enable-kvm', which means explicitly removing
+the ht flag, but the guest still reports HT(cat /proc/cpuinfo in linux guest)
+enabled. In other words, under KVM the ht bit seems to be forced on even when
+the user tries to disable it.
+XiaoYao reminded me that issue [3] stems from a different patch. Please ignore
+it for now—I'll start a separate thread to discuss that one independently.
+Best regards,
+Ewan
+
+On 4/29/2025 11:02 AM, Ewan Hai wrote:
+Hi Community,
+
+This email contains 3 bugs appear to share the same root cause.
+[1] We ran into the following warnings when running QEMU v10.0.0 in TCG
+mode:
+qemu-system-x86_64 \
+   -machine q35 \
+   -m 4G -smp 4 \
+   -kernel ./arch/x86/boot/bzImage \
+   -bios /usr/share/ovmf/OVMF.fd \
+   -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
+   -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
+   -nographic \
+   -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.01H:EDX.ht [bit 28]
+qemu-system-x86_64: warning: TCG doesn't support requested feature:
+CPUID.80000001H:ECX.cmp-legacy [bit 1]
+(repeats 4 times, once per vCPU)
+Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up
+CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()" is
+what introduced the warnings.
+Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28])
+and CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT
+support, these bits trigger the warnings above.
+[2] Also, Zhao pointed me to a similar report on GitLab:
+https://gitlab.com/qemu-project/qemu/-/issues/2894
+The symptoms there look identical to what we're seeing.
+By convention we file one issue per email, but these two appear to share
+the same root cause, so I'm describing them together here.
+It was caused by my two patches. I think the fix can be as follow.
+If no objection from the community, I can submit the formal patch.
+
+diff --git a/target/i386/cpu.c b/target/i386/cpu.c
+index 1f970aa4daa6..fb95aadd6161 100644
+--- a/target/i386/cpu.c
++++ b/target/i386/cpu.c
+@@ -776,11 +776,12 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
+vendor1,
+CPUID_PAE | CPUID_MCE | CPUID_CX8 | CPUID_APIC | CPUID_SEP | \
+           CPUID_MTRR | CPUID_PGE | CPUID_MCA | CPUID_CMOV | CPUID_PAT | \
+           CPUID_PSE36 | CPUID_CLFLUSH | CPUID_ACPI | CPUID_MMX | \
+-          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE)
++          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE | \
++          CPUID_HT)
+           /* partly implemented:
+           CPUID_MTRR, CPUID_MCA, CPUID_CLFLUSH (needed for Win64) */
+           /* missing:
+-          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_HT, CPUID_TM, CPUID_PBE */
++          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_TM, CPUID_PBE */
+
+ /*
+  * Kernel-only features that can be shown to usermode programs even if
+@@ -848,7 +849,8 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
+vendor1,
+#define TCG_EXT3_FEATURES (CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM | \
+           CPUID_EXT3_CR8LEG | CPUID_EXT3_ABM | CPUID_EXT3_SSE4A | \
+-          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES)
++          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES | \
++          CPUID_EXT3_CMP_LEG)
+
+ #define TCG_EXT4_FEATURES 0
+[3] My colleague Alan noticed what appears to be a related problem: if
+we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
+explicitly removing the ht flag, but the guest still reports HT(cat /
+proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
+bit seems to be forced on even when the user tries to disable it.
+This has been the behavior of QEMU for many years, not some regression
+introduced by my patches. We can discuss how to address it separately.
+Best regards,
+Ewan
+
+On Tue, Apr 29, 2025 at 01:55:59PM +0800, Xiaoyao Li wrote:
+>
+Date: Tue, 29 Apr 2025 13:55:59 +0800
+>
+From: Xiaoyao Li <xiaoyao.li@intel.com>
+>
+Subject: Re: [Bug] QEMU TCG warnings after commit c6bd2dd63420 - HTT /
+>
+CMP_LEG bits
+>
+>
+On 4/29/2025 11:02 AM, Ewan Hai wrote:
+>
+> Hi Community,
+>
+>
+>
+> This email contains 3 bugs appear to share the same root cause.
+>
+>
+>
+> [1] We ran into the following warnings when running QEMU v10.0.0 in TCG
+>
+> mode:
+>
+>
+>
+> qemu-system-x86_64 \
+>
+>    -machine q35 \
+>
+>    -m 4G -smp 4 \
+>
+>    -kernel ./arch/x86/boot/bzImage \
+>
+>    -bios /usr/share/ovmf/OVMF.fd \
+>
+>    -drive file=~/kernel/rootfs.ext4,index=0,format=raw,media=disk \
+>
+>    -drive file=~/kernel/swap.img,index=1,format=raw,media=disk \
+>
+>    -nographic \
+>
+>    -append 'root=/dev/sda rw resume=/dev/sdb console=ttyS0 nokaslr'
+>
+>
+>
+> qemu-system-x86_64: warning: TCG doesn't support requested feature:
+>
+> CPUID.01H:EDX.ht [bit 28]
+>
+> qemu-system-x86_64: warning: TCG doesn't support requested feature:
+>
+> CPUID.80000001H:ECX.cmp-legacy [bit 1]
+>
+> (repeats 4 times, once per vCPU)
+>
+>
+>
+> Tracing the history shows that commit c6bd2dd63420 "i386/cpu: Set up
+>
+> CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()" is
+>
+> what introduced the warnings.
+>
+>
+>
+> Since that commit, TCG unconditionally advertises HTT (CPUID 1 EDX[28])
+>
+> and CMP_LEG (CPUID 8000_0001 ECX[1]). Because TCG itself has no SMT
+>
+> support, these bits trigger the warnings above.
+>
+>
+>
+> [2] Also, Zhao pointed me to a similar report on GitLab:
+>
+>
+https://gitlab.com/qemu-project/qemu/-/issues/2894
+>
+> The symptoms there look identical to what we're seeing.
+>
+>
+>
+> By convention we file one issue per email, but these two appear to share
+>
+> the same root cause, so I'm describing them together here.
+>
+>
+It was caused by my two patches. I think the fix can be as follow.
+>
+If no objection from the community, I can submit the formal patch.
+>
+>
+diff --git a/target/i386/cpu.c b/target/i386/cpu.c
+>
+index 1f970aa4daa6..fb95aadd6161 100644
+>
+--- a/target/i386/cpu.c
+>
++++ b/target/i386/cpu.c
+>
+@@ -776,11 +776,12 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
+>
+vendor1,
+>
+CPUID_PAE | CPUID_MCE | CPUID_CX8 | CPUID_APIC | CPUID_SEP | \
+>
+CPUID_MTRR | CPUID_PGE | CPUID_MCA | CPUID_CMOV | CPUID_PAT | \
+>
+CPUID_PSE36 | CPUID_CLFLUSH | CPUID_ACPI | CPUID_MMX | \
+>
+-          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE)
+>
++          CPUID_FXSR | CPUID_SSE | CPUID_SSE2 | CPUID_SS | CPUID_DE | \
+>
++          CPUID_HT)
+>
+/* partly implemented:
+>
+CPUID_MTRR, CPUID_MCA, CPUID_CLFLUSH (needed for Win64) */
+>
+/* missing:
+>
+-          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_HT, CPUID_TM, CPUID_PBE */
+>
++          CPUID_VME, CPUID_DTS, CPUID_SS, CPUID_TM, CPUID_PBE */
+>
+>
+/*
+>
+* Kernel-only features that can be shown to usermode programs even if
+>
+@@ -848,7 +849,8 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t
+>
+vendor1,
+>
+>
+#define TCG_EXT3_FEATURES (CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM | \
+>
+CPUID_EXT3_CR8LEG | CPUID_EXT3_ABM | CPUID_EXT3_SSE4A | \
+>
+-          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES)
+>
++          CPUID_EXT3_3DNOWPREFETCH | CPUID_EXT3_KERNEL_FEATURES | \
+>
++          CPUID_EXT3_CMP_LEG)
+>
+>
+#define TCG_EXT4_FEATURES 0
+This fix is fine for me...at least from SDM, HTT depends on topology and
+it should exist when user sets "-smp 4".
+
+>
+> [3] My colleague Alan noticed what appears to be a related problem: if
+>
+> we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
+>
+> explicitly removing the ht flag, but the guest still reports HT(cat
+>
+> /proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
+>
+> bit seems to be forced on even when the user tries to disable it.
+>
+>
+XiaoYao reminded me that issue [3] stems from a different patch. Please
+>
+ignore it for now—I'll start a separate thread to discuss that one
+>
+independently.
+I haven't found any other thread :-).
+
+By the way, just curious, in what cases do you need to disbale the HT
+flag? "-smp 4" means 4 cores with 1 thread per core, and is it not
+enough?
+
+As for the “-ht” behavior, I'm also unsure whether this should be fixed
+or not - one possible consideration is whether “-ht” would be useful.
+
+On 5/8/25 5:04 PM, Zhao Liu wrote:
+[3] My colleague Alan noticed what appears to be a related problem: if
+we launch a guest with '-cpu <model>,-ht --enable-kvm', which means
+explicitly removing the ht flag, but the guest still reports HT(cat
+/proc/cpuinfo in linux guest) enabled. In other words, under KVM the ht
+bit seems to be forced on even when the user tries to disable it.
+XiaoYao reminded me that issue [3] stems from a different patch. Please
+ignore it for now—I'll start a separate thread to discuss that one
+independently.
+I haven't found any other thread :-).
+Please refer to
+https://lore.kernel.org/all/db6ae3bb-f4e5-4719-9beb-623fcff56af2@zhaoxin.com/
+.
+By the way, just curious, in what cases do you need to disbale the HT
+flag? "-smp 4" means 4 cores with 1 thread per core, and is it not
+enough?
+
+As for the “-ht” behavior, I'm also unsure whether this should be fixed
+or not - one possible consideration is whether “-ht” would be useful.
+I wasn't trying to target any specific use case, using "-ht" was simply a way to
+check how the ht feature behaves under both KVM and TCG. There's no special
+workload behind it; I just wanted to confirm that the flag is respected (or not)
+in each mode.
+
diff --git a/results/classifier/zero-shot/010/review/67821138 b/results/classifier/zero-shot/010/review/67821138
new file mode 100644
index 00000000..76047145
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/67821138
@@ -0,0 +1,223 @@
+permissions: 0.935
+device: 0.916
+PID: 0.909
+boot: 0.881
+debug: 0.870
+other: 0.853
+performance: 0.845
+semantic: 0.843
+graphic: 0.826
+files: 0.824
+KVM: 0.822
+vnc: 0.734
+network: 0.718
+socket: 0.699
+debug: 0.461
+PID: 0.283
+KVM: 0.099
+permissions: 0.032
+files: 0.027
+other: 0.025
+device: 0.017
+socket: 0.010
+network: 0.007
+vnc: 0.006
+semantic: 0.005
+graphic: 0.004
+performance: 0.004
+boot: 0.001
+
+[BUG, RFC] Base node is in RW after making external snapshot
+
+Hi everyone,
+
+When making an external snapshot, we end up in a situation when 2 block
+graph nodes related to the same image file (format and storage nodes)
+have different RO flags set on them.
+
+E.g.
+
+# ls -la /proc/PID/fd
+lrwx------ 1 root qemu 64 Apr 24 20:14 12 -> /path/to/harddisk.hdd
+
+# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
+--pretty | egrep '"node-name"|"ro"'
+      "ro": false,
+      "node-name": "libvirt-1-format",
+      "ro": false,
+      "node-name": "libvirt-1-storage",
+
+# virsh snapshot-create-as VM --name snap --disk-only
+Domain snapshot snap created
+
+# ls -la /proc/PID/fd
+lr-x------ 1 root qemu 64 Apr 24 20:14 134 -> /path/to/harddisk.hdd
+lrwx------ 1 root qemu 64 Apr 24 20:14 135 -> /path/to/harddisk.snap
+
+# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
+--pretty | egrep '"node-name"|"ro"'
+      "ro": false,
+      "node-name": "libvirt-2-format",
+      "ro": false,
+      "node-name": "libvirt-2-storage",
+      "ro": true,
+      "node-name": "libvirt-1-format",
+      "ro": false,                        <--------------
+      "node-name": "libvirt-1-storage",
+
+File descriptor has been reopened in RO, but "libvirt-1-storage" node
+still has RW permissions set.
+
+I'm wondering it this a bug or this is intended?  Looks like a bug to
+me, although I see that some iotests (e.g. 273) expect 2 nodes related
+to the same image file to have different RO flags.
+
+bdrv_reopen_set_read_only()
+  bdrv_reopen()
+    bdrv_reopen_queue()
+      bdrv_reopen_queue_child()
+    bdrv_reopen_multiple()
+      bdrv_list_refresh_perms()
+        bdrv_topological_dfs()
+        bdrv_do_refresh_perms()
+      bdrv_reopen_commit()
+
+In the stack above bdrv_reopen_set_read_only() is only being called for
+the parent (libvirt-1-format) node.  There're 2 lists: BDSs from
+refresh_list are used by bdrv_drv_set_perm and this leads to actual
+reopen with RO of the file descriptor.  And then there's reopen queue
+bs_queue -- BDSs from this queue get their parameters updated.  While
+refresh_list ends up having the whole subtree (including children, this
+is done in bdrv_topological_dfs()) bs_queue only has the parent.  And
+that is because storage (child) node's (bs->inherits_from == NULL), so
+bdrv_reopen_queue_child() never adds it to the queue.  Could it be the
+source of this bug?
+
+Anyway, would greatly appreciate a clarification.
+
+Andrey
+
+On 4/24/24 21:00, Andrey Drobyshev wrote:
+>
+Hi everyone,
+>
+>
+When making an external snapshot, we end up in a situation when 2 block
+>
+graph nodes related to the same image file (format and storage nodes)
+>
+have different RO flags set on them.
+>
+>
+E.g.
+>
+>
+# ls -la /proc/PID/fd
+>
+lrwx------ 1 root qemu 64 Apr 24 20:14 12 -> /path/to/harddisk.hdd
+>
+>
+# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
+>
+--pretty | egrep '"node-name"|"ro"'
+>
+"ro": false,
+>
+"node-name": "libvirt-1-format",
+>
+"ro": false,
+>
+"node-name": "libvirt-1-storage",
+>
+>
+# virsh snapshot-create-as VM --name snap --disk-only
+>
+Domain snapshot snap created
+>
+>
+# ls -la /proc/PID/fd
+>
+lr-x------ 1 root qemu 64 Apr 24 20:14 134 -> /path/to/harddisk.hdd
+>
+lrwx------ 1 root qemu 64 Apr 24 20:14 135 -> /path/to/harddisk.snap
+>
+>
+# virsh qemu-monitor-command VM '{"execute": "query-named-block-nodes"}'
+>
+--pretty | egrep '"node-name"|"ro"'
+>
+"ro": false,
+>
+"node-name": "libvirt-2-format",
+>
+"ro": false,
+>
+"node-name": "libvirt-2-storage",
+>
+"ro": true,
+>
+"node-name": "libvirt-1-format",
+>
+"ro": false,                        <--------------
+>
+"node-name": "libvirt-1-storage",
+>
+>
+File descriptor has been reopened in RO, but "libvirt-1-storage" node
+>
+still has RW permissions set.
+>
+>
+I'm wondering it this a bug or this is intended?  Looks like a bug to
+>
+me, although I see that some iotests (e.g. 273) expect 2 nodes related
+>
+to the same image file to have different RO flags.
+>
+>
+bdrv_reopen_set_read_only()
+>
+bdrv_reopen()
+>
+bdrv_reopen_queue()
+>
+bdrv_reopen_queue_child()
+>
+bdrv_reopen_multiple()
+>
+bdrv_list_refresh_perms()
+>
+bdrv_topological_dfs()
+>
+bdrv_do_refresh_perms()
+>
+bdrv_reopen_commit()
+>
+>
+In the stack above bdrv_reopen_set_read_only() is only being called for
+>
+the parent (libvirt-1-format) node.  There're 2 lists: BDSs from
+>
+refresh_list are used by bdrv_drv_set_perm and this leads to actual
+>
+reopen with RO of the file descriptor.  And then there's reopen queue
+>
+bs_queue -- BDSs from this queue get their parameters updated.  While
+>
+refresh_list ends up having the whole subtree (including children, this
+>
+is done in bdrv_topological_dfs()) bs_queue only has the parent.  And
+>
+that is because storage (child) node's (bs->inherits_from == NULL), so
+>
+bdrv_reopen_queue_child() never adds it to the queue.  Could it be the
+>
+source of this bug?
+>
+>
+Anyway, would greatly appreciate a clarification.
+>
+>
+Andrey
+Friendly ping.  Could somebody confirm that it is a bug indeed?
+
diff --git a/results/classifier/zero-shot/010/review/68897003 b/results/classifier/zero-shot/010/review/68897003
new file mode 100644
index 00000000..b043ceea
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/68897003
@@ -0,0 +1,740 @@
+other: 0.714
+graphic: 0.694
+permissions: 0.677
+PID: 0.677
+performance: 0.673
+semantic: 0.671
+debug: 0.663
+device: 0.647
+network: 0.614
+files: 0.608
+KVM: 0.598
+socket: 0.585
+boot: 0.569
+vnc: 0.525
+debug: 0.863
+PID: 0.235
+files: 0.082
+performance: 0.062
+device: 0.047
+other: 0.027
+socket: 0.020
+network: 0.017
+boot: 0.013
+vnc: 0.012
+semantic: 0.011
+permissions: 0.003
+graphic: 0.002
+KVM: 0.001
+
+[Qemu-devel] [BUG] VM abort after migration
+
+Hi guys,
+
+We found a qemu core in our testing environment, the assertion
+'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+the bus->irq_count[i] is '-1'.
+
+Through analysis, it was happened after VM migration and we think
+it was caused by the following sequence:
+
+*Migration Source*
+1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+2. save E1000:
+   e1000_pre_save
+    e1000_mit_timer
+     set_interrupt_cause
+      pci_set_irq --> update pci_dev->irq_state to 1 and
+                  update bus->irq_count[x] to 1 ( new )
+    the irq_state sent to dest.
+
+*Migration Dest*
+1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+  the irq_state maybe change to 0 and bus->irq_count[x] will become
+  -1 in this situation.
+3. do VM reboot then the assertion will be triggered.
+
+We also found some guys faced the similar problem:
+[1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+[2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+Is there some patches to fix this problem ?
+Can we save pcibus state after all the pci devs are saved ?
+
+Thanks,
+Longpeng(Mike)
+
+* longpeng (address@hidden) wrote:
+>
+Hi guys,
+>
+>
+We found a qemu core in our testing environment, the assertion
+>
+'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+>
+the bus->irq_count[i] is '-1'.
+>
+>
+Through analysis, it was happened after VM migration and we think
+>
+it was caused by the following sequence:
+>
+>
+*Migration Source*
+>
+1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+>
+2. save E1000:
+>
+e1000_pre_save
+>
+e1000_mit_timer
+>
+set_interrupt_cause
+>
+pci_set_irq --> update pci_dev->irq_state to 1 and
+>
+update bus->irq_count[x] to 1 ( new )
+>
+the irq_state sent to dest.
+>
+>
+*Migration Dest*
+>
+1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+>
+2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+>
+the irq_state maybe change to 0 and bus->irq_count[x] will become
+>
+-1 in this situation.
+>
+3. do VM reboot then the assertion will be triggered.
+>
+>
+We also found some guys faced the similar problem:
+>
+[1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+>
+[2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+>
+>
+Is there some patches to fix this problem ?
+I don't remember any.
+
+>
+Can we save pcibus state after all the pci devs are saved ?
+Does this problem only happen with e1000? I think so.
+If it's only e1000 I think we should fix it - I think once the VM is
+stopped for doing the device migration it shouldn't be raising
+interrupts.
+
+Dave
+
+>
+Thanks,
+>
+Longpeng(Mike)
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+* longpeng (address@hidden) wrote:
+Hi guys,
+
+We found a qemu core in our testing environment, the assertion
+'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+the bus->irq_count[i] is '-1'.
+
+Through analysis, it was happened after VM migration and we think
+it was caused by the following sequence:
+
+*Migration Source*
+1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+2. save E1000:
+    e1000_pre_save
+     e1000_mit_timer
+      set_interrupt_cause
+       pci_set_irq --> update pci_dev->irq_state to 1 and
+                   update bus->irq_count[x] to 1 ( new )
+     the irq_state sent to dest.
+
+*Migration Dest*
+1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+   the irq_state maybe change to 0 and bus->irq_count[x] will become
+   -1 in this situation.
+3. do VM reboot then the assertion will be triggered.
+
+We also found some guys faced the similar problem:
+[1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+[2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+Is there some patches to fix this problem ?
+I don't remember any.
+Can we save pcibus state after all the pci devs are saved ?
+Does this problem only happen with e1000? I think so.
+If it's only e1000 I think we should fix it - I think once the VM is
+stopped for doing the device migration it shouldn't be raising
+interrupts.
+I wonder maybe we can simply fix this by no setting ICS on pre_save()
+but scheduling mit timer unconditionally in post_load().
+Thanks
+Dave
+Thanks,
+Longpeng(Mike)
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+在 2019/7/10 11:25, Jason Wang 写道:
+>
+>
+On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+>
+> * longpeng (address@hidden) wrote:
+>
+>> Hi guys,
+>
+>>
+>
+>> We found a qemu core in our testing environment, the assertion
+>
+>> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+>
+>> the bus->irq_count[i] is '-1'.
+>
+>>
+>
+>> Through analysis, it was happened after VM migration and we think
+>
+>> it was caused by the following sequence:
+>
+>>
+>
+>> *Migration Source*
+>
+>> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+>
+>> 2. save E1000:
+>
+>>     e1000_pre_save
+>
+>>      e1000_mit_timer
+>
+>>       set_interrupt_cause
+>
+>>        pci_set_irq --> update pci_dev->irq_state to 1 and
+>
+>>                    update bus->irq_count[x] to 1 ( new )
+>
+>>      the irq_state sent to dest.
+>
+>>
+>
+>> *Migration Dest*
+>
+>> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+>
+>> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+>
+>>    the irq_state maybe change to 0 and bus->irq_count[x] will become
+>
+>>    -1 in this situation.
+>
+>> 3. do VM reboot then the assertion will be triggered.
+>
+>>
+>
+>> We also found some guys faced the similar problem:
+>
+>> [1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+>
+>> [2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+>
+>>
+>
+>> Is there some patches to fix this problem ?
+>
+> I don't remember any.
+>
+>
+>
+>> Can we save pcibus state after all the pci devs are saved ?
+>
+> Does this problem only happen with e1000? I think so.
+>
+> If it's only e1000 I think we should fix it - I think once the VM is
+>
+> stopped for doing the device migration it shouldn't be raising
+>
+> interrupts.
+>
+>
+>
+I wonder maybe we can simply fix this by no setting ICS on pre_save() but
+>
+scheduling mit timer unconditionally in post_load().
+>
+I also think this is a bug of e1000 because we find more cores with the same
+frame thease days.
+
+I'm not familiar with e1000 so hope someone could fix it, thanks. :)
+
+>
+Thanks
+>
+>
+>
+>
+>
+> Dave
+>
+>
+>
+>> Thanks,
+>
+>> Longpeng(Mike)
+>
+> --
+>
+> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+.
+>
+-- 
+Regards,
+Longpeng(Mike)
+
+On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
+在 2019/7/10 11:25, Jason Wang 写道:
+On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+* longpeng (address@hidden) wrote:
+Hi guys,
+
+We found a qemu core in our testing environment, the assertion
+'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+the bus->irq_count[i] is '-1'.
+
+Through analysis, it was happened after VM migration and we think
+it was caused by the following sequence:
+
+*Migration Source*
+1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+2. save E1000:
+     e1000_pre_save
+      e1000_mit_timer
+       set_interrupt_cause
+        pci_set_irq --> update pci_dev->irq_state to 1 and
+                    update bus->irq_count[x] to 1 ( new )
+      the irq_state sent to dest.
+
+*Migration Dest*
+1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+    the irq_state maybe change to 0 and bus->irq_count[x] will become
+    -1 in this situation.
+3. do VM reboot then the assertion will be triggered.
+
+We also found some guys faced the similar problem:
+[1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+[2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+Is there some patches to fix this problem ?
+I don't remember any.
+Can we save pcibus state after all the pci devs are saved ?
+Does this problem only happen with e1000? I think so.
+If it's only e1000 I think we should fix it - I think once the VM is
+stopped for doing the device migration it shouldn't be raising
+interrupts.
+I wonder maybe we can simply fix this by no setting ICS on pre_save() but
+scheduling mit timer unconditionally in post_load().
+I also think this is a bug of e1000 because we find more cores with the same
+frame thease days.
+
+I'm not familiar with e1000 so hope someone could fix it, thanks. :)
+Draft a path in attachment, please test.
+
+Thanks
+Thanks
+Dave
+Thanks,
+Longpeng(Mike)
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+.
+0001-e1000-don-t-raise-interrupt-in-pre_save.patch
+Description:
+Text Data
+
+在 2019/7/10 11:57, Jason Wang 写道:
+>
+>
+On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
+>
+> 在 2019/7/10 11:25, Jason Wang 写道:
+>
+>> On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+>
+>>> * longpeng (address@hidden) wrote:
+>
+>>>> Hi guys,
+>
+>>>>
+>
+>>>> We found a qemu core in our testing environment, the assertion
+>
+>>>> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+>
+>>>> the bus->irq_count[i] is '-1'.
+>
+>>>>
+>
+>>>> Through analysis, it was happened after VM migration and we think
+>
+>>>> it was caused by the following sequence:
+>
+>>>>
+>
+>>>> *Migration Source*
+>
+>>>> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+>
+>>>> 2. save E1000:
+>
+>>>>      e1000_pre_save
+>
+>>>>       e1000_mit_timer
+>
+>>>>        set_interrupt_cause
+>
+>>>>         pci_set_irq --> update pci_dev->irq_state to 1 and
+>
+>>>>                     update bus->irq_count[x] to 1 ( new )
+>
+>>>>       the irq_state sent to dest.
+>
+>>>>
+>
+>>>> *Migration Dest*
+>
+>>>> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is
+>
+>>>> 1.
+>
+>>>> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+>
+>>>>     the irq_state maybe change to 0 and bus->irq_count[x] will become
+>
+>>>>     -1 in this situation.
+>
+>>>> 3. do VM reboot then the assertion will be triggered.
+>
+>>>>
+>
+>>>> We also found some guys faced the similar problem:
+>
+>>>> [1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+>
+>>>> [2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+>
+>>>>
+>
+>>>> Is there some patches to fix this problem ?
+>
+>>> I don't remember any.
+>
+>>>
+>
+>>>> Can we save pcibus state after all the pci devs are saved ?
+>
+>>> Does this problem only happen with e1000? I think so.
+>
+>>> If it's only e1000 I think we should fix it - I think once the VM is
+>
+>>> stopped for doing the device migration it shouldn't be raising
+>
+>>> interrupts.
+>
+>>
+>
+>> I wonder maybe we can simply fix this by no setting ICS on pre_save() but
+>
+>> scheduling mit timer unconditionally in post_load().
+>
+>>
+>
+> I also think this is a bug of e1000 because we find more cores with the same
+>
+> frame thease days.
+>
+>
+>
+> I'm not familiar with e1000 so hope someone could fix it, thanks. :)
+>
+>
+>
+>
+Draft a path in attachment, please test.
+>
+Thanks. We'll test it for a few weeks and then give you the feedback. :)
+
+>
+Thanks
+>
+>
+>
+>> Thanks
+>
+>>
+>
+>>
+>
+>>> Dave
+>
+>>>
+>
+>>>> Thanks,
+>
+>>>> Longpeng(Mike)
+>
+>>> --Â
+>
+>>> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>> .
+>
+>>
+-- 
+Regards,
+Longpeng(Mike)
+
+在 2019/7/10 11:57, Jason Wang 写道:
+>
+>
+On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
+>
+> 在 2019/7/10 11:25, Jason Wang 写道:
+>
+>> On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+>
+>>> * longpeng (address@hidden) wrote:
+>
+>>>> Hi guys,
+>
+>>>>
+>
+>>>> We found a qemu core in our testing environment, the assertion
+>
+>>>> 'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+>
+>>>> the bus->irq_count[i] is '-1'.
+>
+>>>>
+>
+>>>> Through analysis, it was happened after VM migration and we think
+>
+>>>> it was caused by the following sequence:
+>
+>>>>
+>
+>>>> *Migration Source*
+>
+>>>> 1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+>
+>>>> 2. save E1000:
+>
+>>>>      e1000_pre_save
+>
+>>>>       e1000_mit_timer
+>
+>>>>        set_interrupt_cause
+>
+>>>>         pci_set_irq --> update pci_dev->irq_state to 1 and
+>
+>>>>                     update bus->irq_count[x] to 1 ( new )
+>
+>>>>       the irq_state sent to dest.
+>
+>>>>
+>
+>>>> *Migration Dest*
+>
+>>>> 1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is
+>
+>>>> 1.
+>
+>>>> 2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+>
+>>>>     the irq_state maybe change to 0 and bus->irq_count[x] will become
+>
+>>>>     -1 in this situation.
+>
+>>>> 3. do VM reboot then the assertion will be triggered.
+>
+>>>>
+>
+>>>> We also found some guys faced the similar problem:
+>
+>>>> [1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+>
+>>>> [2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+>
+>>>>
+>
+>>>> Is there some patches to fix this problem ?
+>
+>>> I don't remember any.
+>
+>>>
+>
+>>>> Can we save pcibus state after all the pci devs are saved ?
+>
+>>> Does this problem only happen with e1000? I think so.
+>
+>>> If it's only e1000 I think we should fix it - I think once the VM is
+>
+>>> stopped for doing the device migration it shouldn't be raising
+>
+>>> interrupts.
+>
+>>
+>
+>> I wonder maybe we can simply fix this by no setting ICS on pre_save() but
+>
+>> scheduling mit timer unconditionally in post_load().
+>
+>>
+>
+> I also think this is a bug of e1000 because we find more cores with the same
+>
+> frame thease days.
+>
+>
+>
+> I'm not familiar with e1000 so hope someone could fix it, thanks. :)
+>
+>
+>
+>
+Draft a path in attachment, please test.
+>
+Hi Jason,
+
+We've tested the patch for about two weeks, everything went well, thanks!
+
+Feel free to add my:
+Reported-and-tested-by: Longpeng <address@hidden>
+
+>
+Thanks
+>
+>
+>
+>> Thanks
+>
+>>
+>
+>>
+>
+>>> Dave
+>
+>>>
+>
+>>>> Thanks,
+>
+>>>> Longpeng(Mike)
+>
+>>> --Â
+>
+>>> Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>> .
+>
+>>
+-- 
+Regards,
+Longpeng(Mike)
+
+On 2019/7/27 下午2:10, Longpeng (Mike) wrote:
+在 2019/7/10 11:57, Jason Wang 写道:
+On 2019/7/10 上午11:36, Longpeng (Mike) wrote:
+在 2019/7/10 11:25, Jason Wang 写道:
+On 2019/7/8 下午5:47, Dr. David Alan Gilbert wrote:
+* longpeng (address@hidden) wrote:
+Hi guys,
+
+We found a qemu core in our testing environment, the assertion
+'assert(bus->irq_count[i] == 0)' in pcibus_reset() was triggered and
+the bus->irq_count[i] is '-1'.
+
+Through analysis, it was happened after VM migration and we think
+it was caused by the following sequence:
+
+*Migration Source*
+1. save bus pci.0 state, including irq_count[x] ( =0 , old )
+2. save E1000:
+      e1000_pre_save
+       e1000_mit_timer
+        set_interrupt_cause
+         pci_set_irq --> update pci_dev->irq_state to 1 and
+                     update bus->irq_count[x] to 1 ( new )
+       the irq_state sent to dest.
+
+*Migration Dest*
+1. Receive the irq_count[x] of pci.0 is 0 , but the irq_state of e1000 is 1.
+2. If the e1000 need change irqline , it would call to pci_irq_handler(),
+     the irq_state maybe change to 0 and bus->irq_count[x] will become
+     -1 in this situation.
+3. do VM reboot then the assertion will be triggered.
+
+We also found some guys faced the similar problem:
+[1]
+https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg02525.html
+[2]
+https://bugs.launchpad.net/qemu/+bug/1702621
+Is there some patches to fix this problem ?
+I don't remember any.
+Can we save pcibus state after all the pci devs are saved ?
+Does this problem only happen with e1000? I think so.
+If it's only e1000 I think we should fix it - I think once the VM is
+stopped for doing the device migration it shouldn't be raising
+interrupts.
+I wonder maybe we can simply fix this by no setting ICS on pre_save() but
+scheduling mit timer unconditionally in post_load().
+I also think this is a bug of e1000 because we find more cores with the same
+frame thease days.
+
+I'm not familiar with e1000 so hope someone could fix it, thanks. :)
+Draft a path in attachment, please test.
+Hi Jason,
+
+We've tested the patch for about two weeks, everything went well, thanks!
+
+Feel free to add my:
+Reported-and-tested-by: Longpeng <address@hidden>
+Applied.
+
+Thanks
+Thanks
+Thanks
+Dave
+Thanks,
+Longpeng(Mike)
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+.
+
diff --git a/results/classifier/zero-shot/010/review/70021271 b/results/classifier/zero-shot/010/review/70021271
new file mode 100644
index 00000000..ac86c2f9
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/70021271
@@ -0,0 +1,7472 @@
+other: 0.963
+graphic: 0.958
+permissions: 0.957
+debug: 0.956
+performance: 0.949
+KVM: 0.949
+semantic: 0.946
+vnc: 0.900
+device: 0.887
+PID: 0.880
+socket: 0.873
+network: 0.873
+boot: 0.872
+files: 0.867
+debug: 0.870
+device: 0.054
+files: 0.053
+PID: 0.037
+other: 0.017
+KVM: 0.017
+performance: 0.014
+boot: 0.009
+network: 0.007
+semantic: 0.005
+socket: 0.005
+permissions: 0.004
+graphic: 0.003
+vnc: 0.002
+
+[Qemu-devel] [BUG]Unassigned mem write during pci device hot-plug
+
+Hi all,
+
+In our test, we configured VM with several pci-bridges and a virtio-net nic 
+been attached with bus 4,
+After VM is startup, We ping this nic from host to judge if it is working 
+normally. Then, we hot add pci devices to this VM with bus 0.
+We  found the virtio-net NIC in bus 4 is not working (can not connect) 
+occasionally, as it kick virtio backend failure with error below:
+    Unassigned mem write 00000000fc803004 = 0x1
+
+memory-region: pci_bridge_pci
+  0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+    00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+      00000000fc800000-00000000fc800fff (prio 0, RW): virtio-pci-common
+      00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
+      00000000fc802000-00000000fc802fff (prio 0, RW): virtio-pci-device
+      00000000fc803000-00000000fc803fff (prio 0, RW): virtio-pci-notify  <- io 
+mem unassigned
+      …
+
+We caught an exceptional address changing while this problem happened, show as 
+follow:
+Before pci_bridge_update_mappings：
+      00000000fc000000-00000000fc1fffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fc000000-00000000fc1fffff
+      00000000fc200000-00000000fc3fffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fc200000-00000000fc3fffff
+      00000000fc400000-00000000fc5fffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fc400000-00000000fc5fffff
+      00000000fc600000-00000000fc7fffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fc600000-00000000fc7fffff
+      00000000fc800000-00000000fc9fffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fc800000-00000000fc9fffff <- correct Adress Spce
+      00000000fca00000-00000000fcbfffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fca00000-00000000fcbfffff
+      00000000fcc00000-00000000fcdfffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fcc00000-00000000fcdfffff
+      00000000fce00000-00000000fcffffff (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci 00000000fce00000-00000000fcffffff
+
+After pci_bridge_update_mappings：
+      00000000fda00000-00000000fdbfffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fda00000-00000000fdbfffff
+      00000000fdc00000-00000000fddfffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fdc00000-00000000fddfffff
+      00000000fde00000-00000000fdffffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fde00000-00000000fdffffff
+      00000000fe000000-00000000fe1fffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fe000000-00000000fe1fffff
+      00000000fe200000-00000000fe3fffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fe200000-00000000fe3fffff
+      00000000fe400000-00000000fe5fffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fe400000-00000000fe5fffff
+      00000000fe600000-00000000fe7fffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fe600000-00000000fe7fffff
+      00000000fe800000-00000000fe9fffff (prio 1, RW): alias pci_bridge_mem 
+@pci_bridge_pci 00000000fe800000-00000000fe9fffff
+      fffffffffc800000-fffffffffc800000 (prio 1, RW): alias pci_bridge_pref_mem 
+@pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress Space
+
+We have figured out why this address becomes this value,  according to pci 
+spec,  pci driver can get BAR address size by writing 0xffffffff to
+the pci register firstly, and then read back the value from this register.
+We didn't handle this value  specially while process pci write in qemu, the 
+function call stack is:
+Pci_bridge_dev_write_config
+-> pci_bridge_write_config
+-> pci_default_write_config (we update the config[address] value here to 
+fffffffffc800000, which should be 0xfc800000 )
+-> pci_bridge_update_mappings
+                ->pci_bridge_region_del(br, br->windows);
+-> pci_bridge_region_init
+                                                                
+->pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong value 
+fffffffffc800000)
+                                                -> 
+memory_region_transaction_commit
+
+So, as we can see, we use the wrong base address in qemu to update the memory 
+regions, though, we update the base address to
+The correct value after pci driver in VM write the original value back, the 
+virtio NIC in bus 4 may still sends net packets concurrently with
+The wrong memory region address.
+
+We have tried to skip the memory region update action in qemu while detect pci 
+write with 0xffffffff value, and it does work, but
+This seems to be not gently.
+
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+index b2e50c3..84b405d 100644
+--- a/hw/pci/pci_bridge.c
++++ b/hw/pci/pci_bridge.c
+@@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
+     pci_default_write_config(d, address, val, len);
+-    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
++    if ( (val != 0xffffffff) &&
++        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+         /* io base/limit */
+         ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+@@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
+         ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+         /* vga enable */
+-        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
++        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
+         pci_bridge_update_mappings(s);
+     }
+
+Thinks,
+Xu
+
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+Hi all,
+>
+>
+>
+>
+In our test, we configured VM with several pci-bridges and a virtio-net nic
+>
+been attached with bus 4,
+>
+>
+After VM is startup, We ping this nic from host to judge if it is working
+>
+normally. Then, we hot add pci devices to this VM with bus 0.
+>
+>
+We  found the virtio-net NIC in bus 4 is not working (can not connect)
+>
+occasionally, as it kick virtio backend failure with error below:
+>
+>
+Unassigned mem write 00000000fc803004 = 0x1
+Thanks for the report. Which guest was used to produce this problem?
+
+-- 
+MST
+
+n Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> Hi all,
+>
+>
+>
+>
+>
+>
+>
+> In our test, we configured VM with several pci-bridges and a
+>
+> virtio-net nic been attached with bus 4,
+>
+>
+>
+> After VM is startup, We ping this nic from host to judge if it is
+>
+> working normally. Then, we hot add pci devices to this VM with bus 0.
+>
+>
+>
+> We  found the virtio-net NIC in bus 4 is not working (can not connect)
+>
+> occasionally, as it kick virtio backend failure with error below:
+>
+>
+>
+>     Unassigned mem write 00000000fc803004 = 0x1
+>
+>
+Thanks for the report. Which guest was used to produce this problem?
+>
+>
+--
+>
+MST
+I was seeing this problem when I hotplug a VFIO device to guest CentOS 7.4,
+after that I compiled the latest Linux kernel and it also contains this problem.
+
+Thinks,
+Xu
+
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+Hi all,
+>
+>
+>
+>
+In our test, we configured VM with several pci-bridges and a virtio-net nic
+>
+been attached with bus 4,
+>
+>
+After VM is startup, We ping this nic from host to judge if it is working
+>
+normally. Then, we hot add pci devices to this VM with bus 0.
+>
+>
+We  found the virtio-net NIC in bus 4 is not working (can not connect)
+>
+occasionally, as it kick virtio backend failure with error below:
+>
+>
+Unassigned mem write 00000000fc803004 = 0x1
+>
+>
+>
+>
+memory-region: pci_bridge_pci
+>
+>
+0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+>
+>
+00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+>
+00000000fc800000-00000000fc800fff (prio 0, RW): virtio-pci-common
+>
+>
+00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
+>
+>
+00000000fc802000-00000000fc802fff (prio 0, RW): virtio-pci-device
+>
+>
+00000000fc803000-00000000fc803fff (prio 0, RW): virtio-pci-notify  <- io
+>
+mem unassigned
+>
+>
+…
+>
+>
+>
+>
+We caught an exceptional address changing while this problem happened, show as
+>
+follow:
+>
+>
+Before pci_bridge_update_mappings：
+>
+>
+00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fc000000-00000000fc1fffff
+>
+>
+00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fc200000-00000000fc3fffff
+>
+>
+00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fc400000-00000000fc5fffff
+>
+>
+00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fc600000-00000000fc7fffff
+>
+>
+00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fc800000-00000000fc9fffff <- correct Adress Spce
+>
+>
+00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fca00000-00000000fcbfffff
+>
+>
+00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fcc00000-00000000fcdfffff
+>
+>
+00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci 00000000fce00000-00000000fcffffff
+>
+>
+>
+>
+After pci_bridge_update_mappings：
+>
+>
+00000000fda00000-00000000fdbfffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fda00000-00000000fdbfffff
+>
+>
+00000000fdc00000-00000000fddfffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fdc00000-00000000fddfffff
+>
+>
+00000000fde00000-00000000fdffffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fde00000-00000000fdffffff
+>
+>
+00000000fe000000-00000000fe1fffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fe000000-00000000fe1fffff
+>
+>
+00000000fe200000-00000000fe3fffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fe200000-00000000fe3fffff
+>
+>
+00000000fe400000-00000000fe5fffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fe400000-00000000fe5fffff
+>
+>
+00000000fe600000-00000000fe7fffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fe600000-00000000fe7fffff
+>
+>
+00000000fe800000-00000000fe9fffff (prio 1, RW): alias pci_bridge_mem
+>
+@pci_bridge_pci 00000000fe800000-00000000fe9fffff
+>
+>
+fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+@pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
+>
+Space
+This one is empty though right?
+
+>
+>
+>
+We have figured out why this address becomes this value,  according to pci
+>
+spec,  pci driver can get BAR address size by writing 0xffffffff to
+>
+>
+the pci register firstly, and then read back the value from this register.
+OK however as you show below the BAR being sized is the BAR
+if a bridge. Are you then adding a bridge device by hotplug?
+
+
+
+>
+We didn't handle this value  specially while process pci write in qemu, the
+>
+function call stack is:
+>
+>
+Pci_bridge_dev_write_config
+>
+>
+-> pci_bridge_write_config
+>
+>
+-> pci_default_write_config (we update the config[address] value here to
+>
+fffffffffc800000, which should be 0xfc800000 )
+>
+>
+-> pci_bridge_update_mappings
+>
+>
+->pci_bridge_region_del(br, br->windows);
+>
+>
+-> pci_bridge_region_init
+>
+>
+->
+>
+pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong value
+>
+fffffffffc800000)
+>
+>
+->
+>
+memory_region_transaction_commit
+>
+>
+>
+>
+So, as we can see, we use the wrong base address in qemu to update the memory
+>
+regions, though, we update the base address to
+>
+>
+The correct value after pci driver in VM write the original value back, the
+>
+virtio NIC in bus 4 may still sends net packets concurrently with
+>
+>
+The wrong memory region address.
+>
+>
+>
+>
+We have tried to skip the memory region update action in qemu while detect pci
+>
+write with 0xffffffff value, and it does work, but
+>
+>
+This seems to be not gently.
+For sure. But I'm still puzzled as to why does Linux try to
+size the BAR of the bridge while a device behind it is
+used.
+
+Can you pls post your QEMU command line?
+
+
+
+>
+>
+>
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+>
+>
+index b2e50c3..84b405d 100644
+>
+>
+--- a/hw/pci/pci_bridge.c
+>
+>
++++ b/hw/pci/pci_bridge.c
+>
+>
+@@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+>
+pci_default_write_config(d, address, val, len);
+>
+>
+-    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
++    if ( (val != 0xffffffff) &&
+>
+>
++        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+/* io base/limit */
+>
+>
+ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+>
+@@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+>
+ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+>
+/* vga enable */
+>
+>
+-        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+>
++        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
+>
+>
+pci_bridge_update_mappings(s);
+>
+>
+}
+>
+>
+>
+>
+Thinks,
+>
+>
+Xu
+>
+
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> Hi all,
+>
+>
+>
+>
+>
+>
+>
+> In our test, we configured VM with several pci-bridges and a
+>
+> virtio-net nic been attached with bus 4,
+>
+>
+>
+> After VM is startup, We ping this nic from host to judge if it is
+>
+> working normally. Then, we hot add pci devices to this VM with bus 0.
+>
+>
+>
+> We  found the virtio-net NIC in bus 4 is not working (can not connect)
+>
+> occasionally, as it kick virtio backend failure with error below:
+>
+>
+>
+>     Unassigned mem write 00000000fc803004 = 0x1
+>
+>
+>
+>
+>
+>
+>
+> memory-region: pci_bridge_pci
+>
+>
+>
+>   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+>
+>
+>
+>     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+>
+>
+>       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> virtio-pci-common
+>
+>
+>
+>       00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
+>
+>
+>
+>       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> virtio-pci-device
+>
+>
+>
+>       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> virtio-pci-notify  <- io mem unassigned
+>
+>
+>
+>       …
+>
+>
+>
+>
+>
+>
+>
+> We caught an exceptional address changing while this problem happened,
+>
+> show as
+>
+> follow:
+>
+>
+>
+> Before pci_bridge_update_mappings：
+>
+>
+>
+>       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fc000000-00000000fc1fffff
+>
+>
+>
+>       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fc200000-00000000fc3fffff
+>
+>
+>
+>       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fc400000-00000000fc5fffff
+>
+>
+>
+>       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fc600000-00000000fc7fffff
+>
+>
+>
+>       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fc800000-00000000fc9fffff
+>
+> <- correct Adress Spce
+>
+>
+>
+>       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fca00000-00000000fcbfffff
+>
+>
+>
+>       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fcc00000-00000000fcdfffff
+>
+>
+>
+>       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> pci_bridge_pref_mem @pci_bridge_pci 00000000fce00000-00000000fcffffff
+>
+>
+>
+>
+>
+>
+>
+> After pci_bridge_update_mappings：
+>
+>
+>
+>       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
+>
+>
+>
+>       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
+>
+>
+>
+>       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
+>
+>
+>
+>       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
+>
+>
+>
+>       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
+>
+>
+>
+>       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
+>
+>
+>
+>       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
+>
+>
+>
+>       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
+>
+>
+>
+>       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+> pci_bridge_pref_mem
+>
+> @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
+>
+Space
+>
+>
+This one is empty though right?
+>
+>
+>
+>
+>
+>
+> We have figured out why this address becomes this value,  according to
+>
+> pci spec,  pci driver can get BAR address size by writing 0xffffffff
+>
+> to
+>
+>
+>
+> the pci register firstly, and then read back the value from this register.
+>
+>
+>
+OK however as you show below the BAR being sized is the BAR if a bridge. Are
+>
+you then adding a bridge device by hotplug?
+No, I just simply hot plugged a VFIO device to Bus 0, another interesting 
+phenomenon is
+If I hot plug the device to other bus, this doesn't happened.
+ 
+>
+>
+>
+> We didn't handle this value  specially while process pci write in
+>
+> qemu, the function call stack is:
+>
+>
+>
+> Pci_bridge_dev_write_config
+>
+>
+>
+> -> pci_bridge_write_config
+>
+>
+>
+> -> pci_default_write_config (we update the config[address] value here
+>
+> -> to
+>
+> fffffffffc800000, which should be 0xfc800000 )
+>
+>
+>
+> -> pci_bridge_update_mappings
+>
+>
+>
+>                 ->pci_bridge_region_del(br, br->windows);
+>
+>
+>
+> -> pci_bridge_region_init
+>
+>
+>
+>                                                                 ->
+>
+> pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
+>
+> value
+>
+> fffffffffc800000)
+>
+>
+>
+>                                                 ->
+>
+> memory_region_transaction_commit
+>
+>
+>
+>
+>
+>
+>
+> So, as we can see, we use the wrong base address in qemu to update the
+>
+> memory regions, though, we update the base address to
+>
+>
+>
+> The correct value after pci driver in VM write the original value
+>
+> back, the virtio NIC in bus 4 may still sends net packets concurrently
+>
+> with
+>
+>
+>
+> The wrong memory region address.
+>
+>
+>
+>
+>
+>
+>
+> We have tried to skip the memory region update action in qemu while
+>
+> detect pci write with 0xffffffff value, and it does work, but
+>
+>
+>
+> This seems to be not gently.
+>
+>
+For sure. But I'm still puzzled as to why does Linux try to size the BAR of
+>
+the
+>
+bridge while a device behind it is used.
+>
+>
+Can you pls post your QEMU command line?
+My QEMU command line:
+/root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S -object 
+secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-Linux/master-key.aes
+ -machine pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu 
+host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m 
+size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp 
+20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024 -numa 
+node,nodeid=1,cpus=5-9,mem=1024 -numa node,nodeid=2,cpus=10-14,mem=1024 -numa 
+node,nodeid=3,cpus=15-19,mem=1024 -uuid 34a588c7-b0f2-4952-b39c-47fae3411439 
+-no-user-config -nodefaults -chardev 
+socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/monitor.sock,server,nowait
+ -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet 
+-global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on -device 
+pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device 
+pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device 
+pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device 
+pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device 
+pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device 
+piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device 
+usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device 
+nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device 
+virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device 
+virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device 
+virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device 
+virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device 
+virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive 
+file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-virtio-disk0,cache=none
+ -device 
+virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
+ -drive if=none,id=drive-ide0-1-1,readonly=on,cache=none -device 
+ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev 
+tap,fd=35,id=hostnet0 -device 
+virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4,addr=0x1 
+-chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 
+-device usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device 
+cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device 
+virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
+
+I am also very curious about this issue, in the linux kernel code, maybe double 
+check in function pci_bridge_check_ranges triggered this problem.
+
+
+>
+>
+>
+>
+>
+>
+>
+>
+> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+>
+>
+>
+> index b2e50c3..84b405d 100644
+>
+>
+>
+> --- a/hw/pci/pci_bridge.c
+>
+>
+>
+> +++ b/hw/pci/pci_bridge.c
+>
+>
+>
+> @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+>
+>
+>      pci_default_write_config(d, address, val, len);
+>
+>
+>
+> -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+>
+> +    if ( (val != 0xffffffff) &&
+>
+>
+>
+> +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+>
+>          /* io base/limit */
+>
+>
+>
+>          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+>
+>
+> @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+>
+>
+>          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+>
+>
+>          /* vga enable */
+>
+>
+>
+> -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+>
+>
+> +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
+>
+>
+>
+>          pci_bridge_update_mappings(s);
+>
+>
+>
+>      }
+>
+>
+>
+>
+>
+>
+>
+> Thinks,
+>
+>
+>
+> Xu
+>
+>
+
+On Mon, Dec 10, 2018 at 03:12:53AM +0000, xuyandong wrote:
+>
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > Hi all,
+>
+> >
+>
+> >
+>
+> >
+>
+> > In our test, we configured VM with several pci-bridges and a
+>
+> > virtio-net nic been attached with bus 4,
+>
+> >
+>
+> > After VM is startup, We ping this nic from host to judge if it is
+>
+> > working normally. Then, we hot add pci devices to this VM with bus 0.
+>
+> >
+>
+> > We  found the virtio-net NIC in bus 4 is not working (can not connect)
+>
+> > occasionally, as it kick virtio backend failure with error below:
+>
+> >
+>
+> >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> >
+>
+> >
+>
+> >
+>
+> > memory-region: pci_bridge_pci
+>
+> >
+>
+> >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+>
+> >
+>
+> >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+> >
+>
+> >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > virtio-pci-common
+>
+> >
+>
+> >       00000000fc801000-00000000fc801fff (prio 0, RW): virtio-pci-isr
+>
+> >
+>
+> >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > virtio-pci-device
+>
+> >
+>
+> >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > virtio-pci-notify  <- io mem unassigned
+>
+> >
+>
+> >       …
+>
+> >
+>
+> >
+>
+> >
+>
+> > We caught an exceptional address changing while this problem happened,
+>
+> > show as
+>
+> > follow:
+>
+> >
+>
+> > Before pci_bridge_update_mappings：
+>
+> >
+>
+> >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc000000-00000000fc1fffff
+>
+> >
+>
+> >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc200000-00000000fc3fffff
+>
+> >
+>
+> >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc400000-00000000fc5fffff
+>
+> >
+>
+> >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc600000-00000000fc7fffff
+>
+> >
+>
+> >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fc800000-00000000fc9fffff
+>
+> > <- correct Adress Spce
+>
+> >
+>
+> >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fca00000-00000000fcbfffff
+>
+> >
+>
+> >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fcc00000-00000000fcdfffff
+>
+> >
+>
+> >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem @pci_bridge_pci 00000000fce00000-00000000fcffffff
+>
+> >
+>
+> >
+>
+> >
+>
+> > After pci_bridge_update_mappings：
+>
+> >
+>
+> >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
+>
+> >
+>
+> >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
+>
+> >
+>
+> >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
+>
+> >
+>
+> >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
+>
+> >
+>
+> >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
+>
+> >
+>
+> >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
+>
+> >
+>
+> >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
+>
+> >
+>
+> >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
+>
+> >
+>
+> >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem
+>
+> > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional Adress
+>
+> Space
+>
+>
+>
+> This one is empty though right?
+>
+>
+>
+> >
+>
+> >
+>
+> > We have figured out why this address becomes this value,  according to
+>
+> > pci spec,  pci driver can get BAR address size by writing 0xffffffff
+>
+> > to
+>
+> >
+>
+> > the pci register firstly, and then read back the value from this register.
+>
+>
+>
+>
+>
+> OK however as you show below the BAR being sized is the BAR if a bridge. Are
+>
+> you then adding a bridge device by hotplug?
+>
+>
+No, I just simply hot plugged a VFIO device to Bus 0, another interesting
+>
+phenomenon is
+>
+If I hot plug the device to other bus, this doesn't happened.
+>
+>
+>
+>
+>
+>
+> > We didn't handle this value  specially while process pci write in
+>
+> > qemu, the function call stack is:
+>
+> >
+>
+> > Pci_bridge_dev_write_config
+>
+> >
+>
+> > -> pci_bridge_write_config
+>
+> >
+>
+> > -> pci_default_write_config (we update the config[address] value here
+>
+> > -> to
+>
+> > fffffffffc800000, which should be 0xfc800000 )
+>
+> >
+>
+> > -> pci_bridge_update_mappings
+>
+> >
+>
+> >                 ->pci_bridge_region_del(br, br->windows);
+>
+> >
+>
+> > -> pci_bridge_region_init
+>
+> >
+>
+> >                                                                 ->
+>
+> > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
+>
+> > value
+>
+> > fffffffffc800000)
+>
+> >
+>
+> >                                                 ->
+>
+> > memory_region_transaction_commit
+>
+> >
+>
+> >
+>
+> >
+>
+> > So, as we can see, we use the wrong base address in qemu to update the
+>
+> > memory regions, though, we update the base address to
+>
+> >
+>
+> > The correct value after pci driver in VM write the original value
+>
+> > back, the virtio NIC in bus 4 may still sends net packets concurrently
+>
+> > with
+>
+> >
+>
+> > The wrong memory region address.
+>
+> >
+>
+> >
+>
+> >
+>
+> > We have tried to skip the memory region update action in qemu while
+>
+> > detect pci write with 0xffffffff value, and it does work, but
+>
+> >
+>
+> > This seems to be not gently.
+>
+>
+>
+> For sure. But I'm still puzzled as to why does Linux try to size the BAR of
+>
+> the
+>
+> bridge while a device behind it is used.
+>
+>
+>
+> Can you pls post your QEMU command line?
+>
+>
+My QEMU command line:
+>
+/root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S -object
+>
+secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-Linux/master-key.aes
+>
+-machine pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
+>
+20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024 -numa
+>
+node,nodeid=1,cpus=5-9,mem=1024 -numa node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+node,nodeid=3,cpus=15-19,mem=1024 -uuid 34a588c7-b0f2-4952-b39c-47fae3411439
+>
+-no-user-config -nodefaults -chardev
+>
+socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/monitor.sock,server,nowait
+>
+-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
+>
+-global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on -device
+>
+pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-virtio-disk0,cache=none
+>
+-device
+>
+virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
+>
+-drive if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
+>
+tap,fd=35,id=hostnet0 -device
+>
+virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4,addr=0x1
+>
+-chardev pty,id=charserial0 -device
+>
+isa-serial,chardev=charserial0,id=serial0 -device
+>
+usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
+>
+>
+I am also very curious about this issue, in the linux kernel code, maybe
+>
+double check in function pci_bridge_check_ranges triggered this problem.
+If you can get the stacktrace in Linux when it tries to write this
+fffff value, that would be quite helpful.
+
+
+>
+>
+>
+>
+>
+>
+>
+>
+> >
+>
+> >
+>
+> > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+>
+> >
+>
+> > index b2e50c3..84b405d 100644
+>
+> >
+>
+> > --- a/hw/pci/pci_bridge.c
+>
+> >
+>
+> > +++ b/hw/pci/pci_bridge.c
+>
+> >
+>
+> > @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+> >
+>
+> >      pci_default_write_config(d, address, val, len);
+>
+> >
+>
+> > -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+> >
+>
+> > +    if ( (val != 0xffffffff) &&
+>
+> >
+>
+> > +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+> >
+>
+> >          /* io base/limit */
+>
+> >
+>
+> >          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+> >
+>
+> > @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+> >
+>
+> >          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+> >
+>
+> >          /* vga enable */
+>
+> >
+>
+> > -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+> >
+>
+> > +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
+>
+> >
+>
+> >          pci_bridge_update_mappings(s);
+>
+> >
+>
+> >      }
+>
+> >
+>
+> >
+>
+> >
+>
+> > Thinks,
+>
+> >
+>
+> > Xu
+>
+> >
+
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > Hi all,
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > In our test, we configured VM with several pci-bridges and a
+>
+> > > virtio-net nic been attached with bus 4,
+>
+> > >
+>
+> > > After VM is startup, We ping this nic from host to judge if it is
+>
+> > > working normally. Then, we hot add pci devices to this VM with bus 0.
+>
+> > >
+>
+> > > We  found the virtio-net NIC in bus 4 is not working (can not
+>
+> > > connect) occasionally, as it kick virtio backend failure with error
+>
+> > > below:
+>
+> > >
+>
+> > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > memory-region: pci_bridge_pci
+>
+> > >
+>
+> > >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+>
+> > >
+>
+> > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+> > >
+>
+> > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > virtio-pci-common
+>
+> > >
+>
+> > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > virtio-pci-isr
+>
+> > >
+>
+> > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > virtio-pci-device
+>
+> > >
+>
+> > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > virtio-pci-notify  <- io mem unassigned
+>
+> > >
+>
+> > >       …
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > We caught an exceptional address changing while this problem
+>
+> > > happened, show as
+>
+> > > follow:
+>
+> > >
+>
+> > > Before pci_bridge_update_mappings：
+>
+> > >
+>
+> > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fc000000-00000000fc1fffff
+>
+> > >
+>
+> > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fc200000-00000000fc3fffff
+>
+> > >
+>
+> > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fc400000-00000000fc5fffff
+>
+> > >
+>
+> > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fc600000-00000000fc7fffff
+>
+> > >
+>
+> > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fc800000-00000000fc9fffff
+>
+> > > <- correct Adress Spce
+>
+> > >
+>
+> > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fca00000-00000000fcbfffff
+>
+> > >
+>
+> > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fcc00000-00000000fcdfffff
+>
+> > >
+>
+> > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > 00000000fce00000-00000000fcffffff
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > After pci_bridge_update_mappings：
+>
+> > >
+>
+> > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
+>
+> > >
+>
+> > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
+>
+> > >
+>
+> > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
+>
+> > >
+>
+> > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
+>
+> > >
+>
+> > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
+>
+> > >
+>
+> > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
+>
+> > >
+>
+> > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
+>
+> > >
+>
+> > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> > > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
+>
+> > >
+>
+> > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+pci_bridge_pref_mem
+>
+> > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
+>
+> > > Adress
+>
+> > Space
+>
+> >
+>
+> > This one is empty though right?
+>
+> >
+>
+> > >
+>
+> > >
+>
+> > > We have figured out why this address becomes this value,
+>
+> > > according to pci spec,  pci driver can get BAR address size by
+>
+> > > writing 0xffffffff to
+>
+> > >
+>
+> > > the pci register firstly, and then read back the value from this
+>
+> > > register.
+>
+> >
+>
+> >
+>
+> > OK however as you show below the BAR being sized is the BAR if a
+>
+> > bridge. Are you then adding a bridge device by hotplug?
+>
+>
+>
+> No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> interesting phenomenon is If I hot plug the device to other bus, this
+>
+> doesn't
+>
+happened.
+>
+>
+>
+> >
+>
+> >
+>
+> > > We didn't handle this value  specially while process pci write in
+>
+> > > qemu, the function call stack is:
+>
+> > >
+>
+> > > Pci_bridge_dev_write_config
+>
+> > >
+>
+> > > -> pci_bridge_write_config
+>
+> > >
+>
+> > > -> pci_default_write_config (we update the config[address] value
+>
+> > > -> here to
+>
+> > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > >
+>
+> > > -> pci_bridge_update_mappings
+>
+> > >
+>
+> > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > >
+>
+> > > -> pci_bridge_region_init
+>
+> > >
+>
+> > >                                                                 ->
+>
+> > > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
+>
+> > > value
+>
+> > > fffffffffc800000)
+>
+> > >
+>
+> > >                                                 ->
+>
+> > > memory_region_transaction_commit
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > So, as we can see, we use the wrong base address in qemu to update
+>
+> > > the memory regions, though, we update the base address to
+>
+> > >
+>
+> > > The correct value after pci driver in VM write the original value
+>
+> > > back, the virtio NIC in bus 4 may still sends net packets
+>
+> > > concurrently with
+>
+> > >
+>
+> > > The wrong memory region address.
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > We have tried to skip the memory region update action in qemu
+>
+> > > while detect pci write with 0xffffffff value, and it does work,
+>
+> > > but
+>
+> > >
+>
+> > > This seems to be not gently.
+>
+> >
+>
+> > For sure. But I'm still puzzled as to why does Linux try to size the
+>
+> > BAR of the bridge while a device behind it is used.
+>
+> >
+>
+> > Can you pls post your QEMU command line?
+>
+>
+>
+> My QEMU command line:
+>
+> /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
+>
+> -object
+>
+> secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-
+>
+> Linux/master-key.aes -machine
+>
+> pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
+>
+> 20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024
+>
+> -numa node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
+>
+> -chardev
+>
+> socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/moni
+>
+> tor.sock,server,nowait -mon
+>
+> chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
+>
+> -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on
+>
+> -device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-v
+>
+> irtio-disk0,cache=none -device
+>
+> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id
+>
+> =virtio-disk0,bootindex=1 -drive
+>
+> if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
+>
+> tap,fd=35,id=hostnet0 -device
+>
+> virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4
+>
+> ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> isa-serial,chardev=charserial0,id=serial0 -device
+>
+> usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
+>
+>
+>
+> I am also very curious about this issue, in the linux kernel code, maybe
+>
+> double
+>
+check in function pci_bridge_check_ranges triggered this problem.
+>
+>
+If you can get the stacktrace in Linux when it tries to write this fffff
+>
+value, that
+>
+would be quite helpful.
+>
+After I add mdelay(100) in function pci_bridge_check_ranges, this phenomenon is
+easier to reproduce, below is my modify in kernel:
+diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
+index cb389277..86e232d 100644
+--- a/drivers/pci/setup-bus.c
++++ b/drivers/pci/setup-bus.c
+@@ -27,7 +27,7 @@
+ #include <linux/slab.h>
+ #include <linux/acpi.h>
+ #include "pci.h"
+-
++#include <linux/delay.h>
+ unsigned int pci_flags;
+ 
+ struct pci_dev_resource {
+@@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
+                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+                                               0xffffffff);
+                pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
++               mdelay(100);
++               printk(KERN_ERR "sleep\n");
++                dump_stack();
+                if (!tmp)
+                        b_res[2].flags &= ~IORESOURCE_MEM_64;
+                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+
+After hot plugging, we get the following log:
+
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:14.0: BAR 0: assigned [mem 
+0xc2360000-0xc237ffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:14.0: BAR 3: assigned [mem 
+0xc2328000-0xc232bfff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:16 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:17 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:18 uefi-linux kernel: sleep
+Dec 11 09:28:18 uefi-linux kernel: CPU: 16 PID: 502 Comm: kworker/u40:1 Not 
+tainted 4.11.0-rc3+ #11
+Dec 11 09:28:18 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
+PIIX, 1996), BIOS 0.0.0 02/06/2015
+Dec 11 09:28:18 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
+Dec 11 09:28:18 uefi-linux kernel: Call Trace:
+Dec 11 09:28:18 uefi-linux kernel: dump_stack+0x63/0x87
+Dec 11 09:28:18 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
+Dec 11 09:28:18 uefi-linux kernel: ? dev_printk+0x4d/0x50
+Dec 11 09:28:18 uefi-linux kernel: enable_slot+0x140/0x2f0
+Dec 11 09:28:18 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
+Dec 11 09:28:18 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:18 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
+Dec 11 09:28:18 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
+Dec 11 09:28:18 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
+Dec 11 09:28:18 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
+Dec 11 09:28:18 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
+Dec 11 09:28:18 uefi-linux kernel: process_one_work+0x165/0x410
+Dec 11 09:28:18 uefi-linux kernel: worker_thread+0x137/0x4c0
+Dec 11 09:28:18 uefi-linux kernel: kthread+0x101/0x140
+Dec 11 09:28:18 uefi-linux kernel: ? rescuer_thread+0x380/0x380
+Dec 11 09:28:18 uefi-linux kernel: ? kthread_park+0x90/0x90
+Dec 11 09:28:18 uefi-linux kernel: ret_from_fork+0x2c/0x40
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:18 uefi-linux kernel: sleep
+Dec 11 09:28:18 uefi-linux kernel: CPU: 16 PID: 502 Comm: kworker/u40:1 Not 
+tainted 4.11.0-rc3+ #11
+Dec 11 09:28:18 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
+PIIX, 1996), BIOS 0.0.0 02/06/2015
+Dec 11 09:28:18 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
+Dec 11 09:28:18 uefi-linux kernel: Call Trace:
+Dec 11 09:28:18 uefi-linux kernel: dump_stack+0x63/0x87
+Dec 11 09:28:18 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
+Dec 11 09:28:18 uefi-linux kernel: ? dev_printk+0x4d/0x50
+Dec 11 09:28:18 uefi-linux kernel: enable_slot+0x140/0x2f0
+Dec 11 09:28:18 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
+Dec 11 09:28:18 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:18 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
+Dec 11 09:28:18 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
+Dec 11 09:28:18 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
+Dec 11 09:28:18 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
+Dec 11 09:28:18 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
+Dec 11 09:28:18 uefi-linux kernel: process_one_work+0x165/0x410
+Dec 11 09:28:18 uefi-linux kernel: worker_thread+0x137/0x4c0
+Dec 11 09:28:18 uefi-linux kernel: kthread+0x101/0x140
+Dec 11 09:28:18 uefi-linux kernel: ? rescuer_thread+0x380/0x380
+Dec 11 09:28:18 uefi-linux kernel: ? kthread_park+0x90/0x90
+Dec 11 09:28:18 uefi-linux kernel: ret_from_fork+0x2c/0x40
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:18 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:19 uefi-linux kernel: sleep
+Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
+tainted 4.11.0-rc3+ #11
+Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
+PIIX, 1996), BIOS 0.0.0 02/06/2015
+Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
+Dec 11 09:28:19 uefi-linux kernel: Call Trace:
+Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
+Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
+Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
+Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
+Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
+Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
+Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
+Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
+Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
+Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
+Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
+Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
+Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
+Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
+Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:19 uefi-linux kernel: sleep
+Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
+tainted 4.11.0-rc3+ #11
+Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
+PIIX, 1996), BIOS 0.0.0 02/06/2015
+Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
+Dec 11 09:28:19 uefi-linux kernel: Call Trace:
+Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
+Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
+Dec 11 09:28:19 uefi-linux kernel: ? pci_conf1_read+0xba/0x100
+Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0xe9/0x960
+Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
+Dec 11 09:28:19 uefi-linux kernel: ? pcibios_allocate_rom_resources+0x45/0x80
+Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
+Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
+Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
+Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
+Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
+Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
+Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
+Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
+Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
+Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
+Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
+Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
+Dec 11 09:28:19 uefi-linux kernel: sleep
+Dec 11 09:28:19 uefi-linux kernel: CPU: 17 PID: 502 Comm: kworker/u40:1 Not 
+tainted 4.11.0-rc3+ #11
+Dec 11 09:28:19 uefi-linux kernel: Hardware name: QEMU Standard PC (i440FX + 
+PIIX, 1996), BIOS 0.0.0 02/06/2015
+Dec 11 09:28:19 uefi-linux kernel: Workqueue: kacpi_hotplug acpi_hotplug_work_fn
+Dec 11 09:28:19 uefi-linux kernel: Call Trace:
+Dec 11 09:28:19 uefi-linux kernel: dump_stack+0x63/0x87
+Dec 11 09:28:19 uefi-linux kernel: __pci_bus_size_bridges+0x931/0x960
+Dec 11 09:28:19 uefi-linux kernel: ? dev_printk+0x4d/0x50
+Dec 11 09:28:19 uefi-linux kernel: enable_slot+0x140/0x2f0
+Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:19 uefi-linux kernel: ? __pm_runtime_resume+0x5c/0x80
+Dec 11 09:28:19 uefi-linux kernel: ? trim_stale_devices+0x9a/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_check_bridge.part.6+0xf5/0x120
+Dec 11 09:28:19 uefi-linux kernel: acpiphp_hotplug_notify+0x145/0x1c0
+Dec 11 09:28:19 uefi-linux kernel: ? acpiphp_post_dock_fixup+0xc0/0xc0
+Dec 11 09:28:19 uefi-linux kernel: acpi_device_hotplug+0x3a6/0x3f3
+Dec 11 09:28:19 uefi-linux kernel: acpi_hotplug_work_fn+0x1e/0x29
+Dec 11 09:28:19 uefi-linux kernel: process_one_work+0x165/0x410
+Dec 11 09:28:19 uefi-linux kernel: worker_thread+0x137/0x4c0
+Dec 11 09:28:19 uefi-linux kernel: kthread+0x101/0x140
+Dec 11 09:28:19 uefi-linux kernel: ? rescuer_thread+0x380/0x380
+Dec 11 09:28:19 uefi-linux kernel: ? kthread_park+0x90/0x90
+Dec 11 09:28:19 uefi-linux kernel: ret_from_fork+0x2c/0x40
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:19 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:20 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:20 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 lost sync at byte 1
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: psmouse serio1: VMMouse at 
+isa0060/serio1/input0 - driver resynced.
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:21 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0: PCI bridge to [bus 01]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [io  
+0xf000-0xffff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2800000-0xc29fffff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:08.0:   bridge window [mem 
+0xc2b00000-0xc2cfffff 64bit pref]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [io  
+0xe000-0xefff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2600000-0xc27fffff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:09.0:   bridge window [mem 
+0xc2d00000-0xc2efffff 64bit pref]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [io  
+0xd000-0xdfff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2400000-0xc25fffff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:00:0a.0:   bridge window [mem 
+0xc2f00000-0xc30fffff 64bit pref]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0: PCI bridge to [bus 05]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [io  
+0xc000-0xcfff]
+Dec 11 09:28:22 uefi-linux kernel: pci 0000:04:0c.0:   bridge window [mem 
+0xc2000000-0xc21fffff]
+
+>
+>
+>
+> >
+>
+> >
+>
+> >
+>
+> > >
+>
+> > >
+>
+> > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+>
+> > >
+>
+> > > index b2e50c3..84b405d 100644
+>
+> > >
+>
+> > > --- a/hw/pci/pci_bridge.c
+>
+> > >
+>
+> > > +++ b/hw/pci/pci_bridge.c
+>
+> > >
+>
+> > > @@ -256,7 +256,8 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+> > >
+>
+> > >      pci_default_write_config(d, address, val, len);
+>
+> > >
+>
+> > > -    if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+> > >
+>
+> > > +    if ( (val != 0xffffffff) &&
+>
+> > >
+>
+> > > +        (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+> > >
+>
+> > >          /* io base/limit */
+>
+> > >
+>
+> > >          ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+> > >
+>
+> > > @@ -266,7 +267,7 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+> > >
+>
+> > >          ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+> > >
+>
+> > >          /* vga enable */
+>
+> > >
+>
+> > > -        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+> > >
+>
+> > > +        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2))) {
+>
+> > >
+>
+> > >          pci_bridge_update_mappings(s);
+>
+> > >
+>
+> > >      }
+>
+> > >
+>
+> > >
+>
+> > >
+>
+> > > Thinks,
+>
+> > >
+>
+> > > Xu
+>
+> > >
+
+On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
+>
+On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > > Hi all,
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > In our test, we configured VM with several pci-bridges and a
+>
+> > > > virtio-net nic been attached with bus 4,
+>
+> > > >
+>
+> > > > After VM is startup, We ping this nic from host to judge if it is
+>
+> > > > working normally. Then, we hot add pci devices to this VM with bus 0.
+>
+> > > >
+>
+> > > > We  found the virtio-net NIC in bus 4 is not working (can not
+>
+> > > > connect) occasionally, as it kick virtio backend failure with error
+>
+> > > > below:
+>
+> > > >
+>
+> > > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > memory-region: pci_bridge_pci
+>
+> > > >
+>
+> > > >   0000000000000000-ffffffffffffffff (prio 0, RW): pci_bridge_pci
+>
+> > > >
+>
+> > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+> > > >
+>
+> > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > > virtio-pci-common
+>
+> > > >
+>
+> > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > > virtio-pci-isr
+>
+> > > >
+>
+> > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > > virtio-pci-device
+>
+> > > >
+>
+> > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > > virtio-pci-notify  <- io mem unassigned
+>
+> > > >
+>
+> > > >       …
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > We caught an exceptional address changing while this problem
+>
+> > > > happened, show as
+>
+> > > > follow:
+>
+> > > >
+>
+> > > > Before pci_bridge_update_mappings：
+>
+> > > >
+>
+> > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fc000000-00000000fc1fffff
+>
+> > > >
+>
+> > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fc200000-00000000fc3fffff
+>
+> > > >
+>
+> > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fc400000-00000000fc5fffff
+>
+> > > >
+>
+> > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fc600000-00000000fc7fffff
+>
+> > > >
+>
+> > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fc800000-00000000fc9fffff
+>
+> > > > <- correct Adress Spce
+>
+> > > >
+>
+> > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fca00000-00000000fcbfffff
+>
+> > > >
+>
+> > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fcc00000-00000000fcdfffff
+>
+> > > >
+>
+> > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > 00000000fce00000-00000000fcffffff
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > After pci_bridge_update_mappings：
+>
+> > > >
+>
+> > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fda00000-00000000fdbfffff
+>
+> > > >
+>
+> > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fdc00000-00000000fddfffff
+>
+> > > >
+>
+> > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fde00000-00000000fdffffff
+>
+> > > >
+>
+> > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fe000000-00000000fe1fffff
+>
+> > > >
+>
+> > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fe200000-00000000fe3fffff
+>
+> > > >
+>
+> > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fe400000-00000000fe5fffff
+>
+> > > >
+>
+> > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fe600000-00000000fe7fffff
+>
+> > > >
+>
+> > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> > > > pci_bridge_mem @pci_bridge_pci 00000000fe800000-00000000fe9fffff
+>
+> > > >
+>
+> > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+> pci_bridge_pref_mem
+>
+> > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
+>
+> > > > Adress
+>
+> > > Space
+>
+> > >
+>
+> > > This one is empty though right?
+>
+> > >
+>
+> > > >
+>
+> > > >
+>
+> > > > We have figured out why this address becomes this value,
+>
+> > > > according to pci spec,  pci driver can get BAR address size by
+>
+> > > > writing 0xffffffff to
+>
+> > > >
+>
+> > > > the pci register firstly, and then read back the value from this
+>
+> > > > register.
+>
+> > >
+>
+> > >
+>
+> > > OK however as you show below the BAR being sized is the BAR if a
+>
+> > > bridge. Are you then adding a bridge device by hotplug?
+>
+> >
+>
+> > No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> > interesting phenomenon is If I hot plug the device to other bus, this
+>
+> > doesn't
+>
+> happened.
+>
+> >
+>
+> > >
+>
+> > >
+>
+> > > > We didn't handle this value  specially while process pci write in
+>
+> > > > qemu, the function call stack is:
+>
+> > > >
+>
+> > > > Pci_bridge_dev_write_config
+>
+> > > >
+>
+> > > > -> pci_bridge_write_config
+>
+> > > >
+>
+> > > > -> pci_default_write_config (we update the config[address] value
+>
+> > > > -> here to
+>
+> > > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > > >
+>
+> > > > -> pci_bridge_update_mappings
+>
+> > > >
+>
+> > > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > > >
+>
+> > > > -> pci_bridge_region_init
+>
+> > > >
+>
+> > > >                                                                 ->
+>
+> > > > pci_bridge_init_alias (here pci_bridge_get_base, we use the wrong
+>
+> > > > value
+>
+> > > > fffffffffc800000)
+>
+> > > >
+>
+> > > >                                                 ->
+>
+> > > > memory_region_transaction_commit
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > So, as we can see, we use the wrong base address in qemu to update
+>
+> > > > the memory regions, though, we update the base address to
+>
+> > > >
+>
+> > > > The correct value after pci driver in VM write the original value
+>
+> > > > back, the virtio NIC in bus 4 may still sends net packets
+>
+> > > > concurrently with
+>
+> > > >
+>
+> > > > The wrong memory region address.
+>
+> > > >
+>
+> > > >
+>
+> > > >
+>
+> > > > We have tried to skip the memory region update action in qemu
+>
+> > > > while detect pci write with 0xffffffff value, and it does work,
+>
+> > > > but
+>
+> > > >
+>
+> > > > This seems to be not gently.
+>
+> > >
+>
+> > > For sure. But I'm still puzzled as to why does Linux try to size the
+>
+> > > BAR of the bridge while a device behind it is used.
+>
+> > >
+>
+> > > Can you pls post your QEMU command line?
+>
+> >
+>
+> > My QEMU command line:
+>
+> > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
+>
+> > -object
+>
+> > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-194-
+>
+> > Linux/master-key.aes -machine
+>
+> > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
+>
+> > 20,sockets=20,cores=1,threads=1 -numa node,nodeid=0,cpus=0-4,mem=1024
+>
+> > -numa node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> > node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> > node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
+>
+> > -chardev
+>
+> > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/moni
+>
+> > tor.sock,server,nowait -mon
+>
+> > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
+>
+> > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot strict=on
+>
+> > -device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=drive-v
+>
+> > irtio-disk0,cache=none -device
+>
+> > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk0,id
+>
+> > =virtio-disk0,bootindex=1 -drive
+>
+> > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
+>
+> > tap,fd=35,id=hostnet0 -device
+>
+> > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=pci.4
+>
+> > ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> > isa-serial,chardev=charserial0,id=serial0 -device
+>
+> > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg timestamp=on
+>
+> >
+>
+> > I am also very curious about this issue, in the linux kernel code, maybe
+>
+> > double
+>
+> check in function pci_bridge_check_ranges triggered this problem.
+>
+>
+>
+> If you can get the stacktrace in Linux when it tries to write this fffff
+>
+> value, that
+>
+> would be quite helpful.
+>
+>
+>
+>
+After I add mdelay(100) in function pci_bridge_check_ranges, this phenomenon
+>
+is
+>
+easier to reproduce, below is my modify in kernel:
+>
+diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
+>
+index cb389277..86e232d 100644
+>
+--- a/drivers/pci/setup-bus.c
+>
++++ b/drivers/pci/setup-bus.c
+>
+@@ -27,7 +27,7 @@
+>
+#include <linux/slab.h>
+>
+#include <linux/acpi.h>
+>
+#include "pci.h"
+>
+-
+>
++#include <linux/delay.h>
+>
+unsigned int pci_flags;
+>
+>
+struct pci_dev_resource {
+>
+@@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
+>
+pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+0xffffffff);
+>
+pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
+>
++               mdelay(100);
+>
++               printk(KERN_ERR "sleep\n");
+>
++                dump_stack();
+>
+if (!tmp)
+>
+b_res[2].flags &= ~IORESOURCE_MEM_64;
+>
+pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+OK!
+I just sent a Linux patch that should help.
+I would appreciate it if you will give it a try
+and if that helps reply to it with
+a Tested-by: tag.
+
+-- 
+MST
+
+On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
+>
+> On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > > > Hi all,
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > In our test, we configured VM with several pci-bridges and a
+>
+> > > > > virtio-net nic been attached with bus 4,
+>
+> > > > >
+>
+> > > > > After VM is startup, We ping this nic from host to judge if it
+>
+> > > > > is working normally. Then, we hot add pci devices to this VM with
+>
+> > > > > bus
+>
+0.
+>
+> > > > >
+>
+> > > > > We  found the virtio-net NIC in bus 4 is not working (can not
+>
+> > > > > connect) occasionally, as it kick virtio backend failure with error
+>
+> > > > > below:
+>
+> > > > >
+>
+> > > > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > memory-region: pci_bridge_pci
+>
+> > > > >
+>
+> > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
+>
+> > > > > pci_bridge_pci
+>
+> > > > >
+>
+> > > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+> > > > >
+>
+> > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > > > virtio-pci-common
+>
+> > > > >
+>
+> > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > > > virtio-pci-isr
+>
+> > > > >
+>
+> > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > > > virtio-pci-device
+>
+> > > > >
+>
+> > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > > > virtio-pci-notify  <- io mem unassigned
+>
+> > > > >
+>
+> > > > >       …
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > We caught an exceptional address changing while this problem
+>
+> > > > > happened, show as
+>
+> > > > > follow:
+>
+> > > > >
+>
+> > > > > Before pci_bridge_update_mappings：
+>
+> > > > >
+>
+> > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fc000000-00000000fc1fffff
+>
+> > > > >
+>
+> > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fc200000-00000000fc3fffff
+>
+> > > > >
+>
+> > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fc400000-00000000fc5fffff
+>
+> > > > >
+>
+> > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fc600000-00000000fc7fffff
+>
+> > > > >
+>
+> > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fc800000-00000000fc9fffff
+>
+> > > > > <- correct Adress Spce
+>
+> > > > >
+>
+> > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fca00000-00000000fcbfffff
+>
+> > > > >
+>
+> > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fcc00000-00000000fcdfffff
+>
+> > > > >
+>
+> > > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > 00000000fce00000-00000000fcffffff
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > After pci_bridge_update_mappings：
+>
+> > > > >
+>
+> > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fda00000-00000000fdbfffff
+>
+> > > > >
+>
+> > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fdc00000-00000000fddfffff
+>
+> > > > >
+>
+> > > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fde00000-00000000fdffffff
+>
+> > > > >
+>
+> > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fe000000-00000000fe1fffff
+>
+> > > > >
+>
+> > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fe200000-00000000fe3fffff
+>
+> > > > >
+>
+> > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fe400000-00000000fe5fffff
+>
+> > > > >
+>
+> > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fe600000-00000000fe7fffff
+>
+> > > > >
+>
+> > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > 00000000fe800000-00000000fe9fffff
+>
+> > > > >
+>
+> > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+> > pci_bridge_pref_mem
+>
+> > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
+>
+Adress
+>
+> > > > Space
+>
+> > > >
+>
+> > > > This one is empty though right?
+>
+> > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > We have figured out why this address becomes this value,
+>
+> > > > > according to pci spec,  pci driver can get BAR address size by
+>
+> > > > > writing 0xffffffff to
+>
+> > > > >
+>
+> > > > > the pci register firstly, and then read back the value from this
+>
+> > > > > register.
+>
+> > > >
+>
+> > > >
+>
+> > > > OK however as you show below the BAR being sized is the BAR if a
+>
+> > > > bridge. Are you then adding a bridge device by hotplug?
+>
+> > >
+>
+> > > No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> > > interesting phenomenon is If I hot plug the device to other bus,
+>
+> > > this doesn't
+>
+> > happened.
+>
+> > >
+>
+> > > >
+>
+> > > >
+>
+> > > > > We didn't handle this value  specially while process pci write
+>
+> > > > > in qemu, the function call stack is:
+>
+> > > > >
+>
+> > > > > Pci_bridge_dev_write_config
+>
+> > > > >
+>
+> > > > > -> pci_bridge_write_config
+>
+> > > > >
+>
+> > > > > -> pci_default_write_config (we update the config[address]
+>
+> > > > > -> value here to
+>
+> > > > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > > > >
+>
+> > > > > -> pci_bridge_update_mappings
+>
+> > > > >
+>
+> > > > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > > > >
+>
+> > > > > -> pci_bridge_region_init
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use the
+>
+> > > > > wrong value
+>
+> > > > > fffffffffc800000)
+>
+> > > > >
+>
+> > > > >                                                 ->
+>
+> > > > > memory_region_transaction_commit
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > So, as we can see, we use the wrong base address in qemu to
+>
+> > > > > update the memory regions, though, we update the base address
+>
+> > > > > to
+>
+> > > > >
+>
+> > > > > The correct value after pci driver in VM write the original
+>
+> > > > > value back, the virtio NIC in bus 4 may still sends net
+>
+> > > > > packets concurrently with
+>
+> > > > >
+>
+> > > > > The wrong memory region address.
+>
+> > > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > We have tried to skip the memory region update action in qemu
+>
+> > > > > while detect pci write with 0xffffffff value, and it does
+>
+> > > > > work, but
+>
+> > > > >
+>
+> > > > > This seems to be not gently.
+>
+> > > >
+>
+> > > > For sure. But I'm still puzzled as to why does Linux try to size
+>
+> > > > the BAR of the bridge while a device behind it is used.
+>
+> > > >
+>
+> > > > Can you pls post your QEMU command line?
+>
+> > >
+>
+> > > My QEMU command line:
+>
+> > > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
+>
+> > > -object
+>
+> > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-
+>
+> > > 194-
+>
+> > > Linux/master-key.aes -machine
+>
+> > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
+>
+> > > 20,sockets=20,cores=1,threads=1 -numa
+>
+> > > node,nodeid=0,cpus=0-4,mem=1024 -numa
+>
+> > > node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> > > node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
+>
+> > > -chardev
+>
+> > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/
+>
+> > > moni
+>
+> > > tor.sock,server,nowait -mon
+>
+> > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
+>
+> > > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot
+>
+> > > strict=on -device
+>
+> > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=dri
+>
+> > > ve-v
+>
+> > > irtio-disk0,cache=none -device
+>
+> > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk
+>
+> > > 0,id
+>
+> > > =virtio-disk0,bootindex=1 -drive
+>
+> > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
+>
+> > > tap,fd=35,id=hostnet0 -device
+>
+> > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=p
+>
+> > > ci.4
+>
+> > > ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> > > isa-serial,chardev=charserial0,id=serial0 -device
+>
+> > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
+>
+> > > timestamp=on
+>
+> > >
+>
+> > > I am also very curious about this issue, in the linux kernel code,
+>
+> > > maybe double
+>
+> > check in function pci_bridge_check_ranges triggered this problem.
+>
+> >
+>
+> > If you can get the stacktrace in Linux when it tries to write this
+>
+> > fffff value, that would be quite helpful.
+>
+> >
+>
+>
+>
+> After I add mdelay(100) in function pci_bridge_check_ranges, this
+>
+> phenomenon is easier to reproduce, below is my modify in kernel:
+>
+> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index
+>
+> cb389277..86e232d 100644
+>
+> --- a/drivers/pci/setup-bus.c
+>
+> +++ b/drivers/pci/setup-bus.c
+>
+> @@ -27,7 +27,7 @@
+>
+>  #include <linux/slab.h>
+>
+>  #include <linux/acpi.h>
+>
+>  #include "pci.h"
+>
+> -
+>
+> +#include <linux/delay.h>
+>
+>  unsigned int pci_flags;
+>
+>
+>
+>  struct pci_dev_resource {
+>
+> @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus
+>
+*bus)
+>
+>                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+>                                                0xffffffff);
+>
+>                 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> &tmp);
+>
+> +               mdelay(100);
+>
+> +               printk(KERN_ERR "sleep\n");
+>
+> +                dump_stack();
+>
+>                 if (!tmp)
+>
+>                         b_res[2].flags &= ~IORESOURCE_MEM_64;
+>
+>                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+>
+>
+>
+OK!
+>
+I just sent a Linux patch that should help.
+>
+I would appreciate it if you will give it a try and if that helps reply to it
+>
+with a
+>
+Tested-by: tag.
+>
+I tested this patch and it works fine on my machine.
+
+But I have another question, if we only fix this problem in the kernel, the 
+Linux
+version that has been released does not work well on the virtualization 
+platform. 
+Is there a way to fix this problem in the backend?
+
+>
+--
+>
+MST
+
+On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
+>
+On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
+>
+> > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > > > > Hi all,
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > In our test, we configured VM with several pci-bridges and a
+>
+> > > > > > virtio-net nic been attached with bus 4,
+>
+> > > > > >
+>
+> > > > > > After VM is startup, We ping this nic from host to judge if it
+>
+> > > > > > is working normally. Then, we hot add pci devices to this VM with
+>
+> > > > > > bus
+>
+> 0.
+>
+> > > > > >
+>
+> > > > > > We  found the virtio-net NIC in bus 4 is not working (can not
+>
+> > > > > > connect) occasionally, as it kick virtio backend failure with
+>
+> > > > > > error below:
+>
+> > > > > >
+>
+> > > > > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > memory-region: pci_bridge_pci
+>
+> > > > > >
+>
+> > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
+>
+> > > > > > pci_bridge_pci
+>
+> > > > > >
+>
+> > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW): virtio-pci
+>
+> > > > > >
+>
+> > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > > > > virtio-pci-common
+>
+> > > > > >
+>
+> > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > > > > virtio-pci-isr
+>
+> > > > > >
+>
+> > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > > > > virtio-pci-device
+>
+> > > > > >
+>
+> > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > > > > virtio-pci-notify  <- io mem unassigned
+>
+> > > > > >
+>
+> > > > > >       …
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > We caught an exceptional address changing while this problem
+>
+> > > > > > happened, show as
+>
+> > > > > > follow:
+>
+> > > > > >
+>
+> > > > > > Before pci_bridge_update_mappings：
+>
+> > > > > >
+>
+> > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fc000000-00000000fc1fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fc200000-00000000fc3fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fc400000-00000000fc5fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fc600000-00000000fc7fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fc800000-00000000fc9fffff
+>
+> > > > > > <- correct Adress Spce
+>
+> > > > > >
+>
+> > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fca00000-00000000fcbfffff
+>
+> > > > > >
+>
+> > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fcc00000-00000000fcdfffff
+>
+> > > > > >
+>
+> > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > 00000000fce00000-00000000fcffffff
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > After pci_bridge_update_mappings：
+>
+> > > > > >
+>
+> > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fda00000-00000000fdbfffff
+>
+> > > > > >
+>
+> > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fdc00000-00000000fddfffff
+>
+> > > > > >
+>
+> > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fde00000-00000000fdffffff
+>
+> > > > > >
+>
+> > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fe000000-00000000fe1fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fe200000-00000000fe3fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fe400000-00000000fe5fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fe600000-00000000fe7fffff
+>
+> > > > > >
+>
+> > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW): alias
+>
+> > > > > > pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > 00000000fe800000-00000000fe9fffff
+>
+> > > > > >
+>
+> > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW): alias
+>
+> > > pci_bridge_pref_mem
+>
+> > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <- Exceptional
+>
+> Adress
+>
+> > > > > Space
+>
+> > > > >
+>
+> > > > > This one is empty though right?
+>
+> > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > We have figured out why this address becomes this value,
+>
+> > > > > > according to pci spec,  pci driver can get BAR address size by
+>
+> > > > > > writing 0xffffffff to
+>
+> > > > > >
+>
+> > > > > > the pci register firstly, and then read back the value from this
+>
+> > > > > > register.
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > OK however as you show below the BAR being sized is the BAR if a
+>
+> > > > > bridge. Are you then adding a bridge device by hotplug?
+>
+> > > >
+>
+> > > > No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> > > > interesting phenomenon is If I hot plug the device to other bus,
+>
+> > > > this doesn't
+>
+> > > happened.
+>
+> > > >
+>
+> > > > >
+>
+> > > > >
+>
+> > > > > > We didn't handle this value  specially while process pci write
+>
+> > > > > > in qemu, the function call stack is:
+>
+> > > > > >
+>
+> > > > > > Pci_bridge_dev_write_config
+>
+> > > > > >
+>
+> > > > > > -> pci_bridge_write_config
+>
+> > > > > >
+>
+> > > > > > -> pci_default_write_config (we update the config[address]
+>
+> > > > > > -> value here to
+>
+> > > > > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > > > > >
+>
+> > > > > > -> pci_bridge_update_mappings
+>
+> > > > > >
+>
+> > > > > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > > > > >
+>
+> > > > > > -> pci_bridge_region_init
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use the
+>
+> > > > > > wrong value
+>
+> > > > > > fffffffffc800000)
+>
+> > > > > >
+>
+> > > > > >                                                 ->
+>
+> > > > > > memory_region_transaction_commit
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > So, as we can see, we use the wrong base address in qemu to
+>
+> > > > > > update the memory regions, though, we update the base address
+>
+> > > > > > to
+>
+> > > > > >
+>
+> > > > > > The correct value after pci driver in VM write the original
+>
+> > > > > > value back, the virtio NIC in bus 4 may still sends net
+>
+> > > > > > packets concurrently with
+>
+> > > > > >
+>
+> > > > > > The wrong memory region address.
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > We have tried to skip the memory region update action in qemu
+>
+> > > > > > while detect pci write with 0xffffffff value, and it does
+>
+> > > > > > work, but
+>
+> > > > > >
+>
+> > > > > > This seems to be not gently.
+>
+> > > > >
+>
+> > > > > For sure. But I'm still puzzled as to why does Linux try to size
+>
+> > > > > the BAR of the bridge while a device behind it is used.
+>
+> > > > >
+>
+> > > > > Can you pls post your QEMU command line?
+>
+> > > >
+>
+> > > > My QEMU command line:
+>
+> > > > /root/xyd/qemu-system-x86_64 -name guest=Linux,debug-threads=on -S
+>
+> > > > -object
+>
+> > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/domain-
+>
+> > > > 194-
+>
+> > > > Linux/master-key.aes -machine
+>
+> > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off -smp
+>
+> > > > 20,sockets=20,cores=1,threads=1 -numa
+>
+> > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
+>
+> > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config -nodefaults
+>
+> > > > -chardev
+>
+> > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Linux/
+>
+> > > > moni
+>
+> > > > tor.sock,server,nowait -mon
+>
+> > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-hpet
+>
+> > > > -global kvm-pit.lost_tick_policy=delay -no-shutdown -boot
+>
+> > > > strict=on -device
+>
+> > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id=dri
+>
+> > > > ve-v
+>
+> > > > irtio-disk0,cache=none -device
+>
+> > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-disk
+>
+> > > > 0,id
+>
+> > > > =virtio-disk0,bootindex=1 -drive
+>
+> > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1 -netdev
+>
+> > > > tap,fd=35,id=hostnet0 -device
+>
+> > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,bus=p
+>
+> > > > ci.4
+>
+> > > > ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> > > > isa-serial,chardev=charserial0,id=serial0 -device
+>
+> > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
+>
+> > > > timestamp=on
+>
+> > > >
+>
+> > > > I am also very curious about this issue, in the linux kernel code,
+>
+> > > > maybe double
+>
+> > > check in function pci_bridge_check_ranges triggered this problem.
+>
+> > >
+>
+> > > If you can get the stacktrace in Linux when it tries to write this
+>
+> > > fffff value, that would be quite helpful.
+>
+> > >
+>
+> >
+>
+> > After I add mdelay(100) in function pci_bridge_check_ranges, this
+>
+> > phenomenon is easier to reproduce, below is my modify in kernel:
+>
+> > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index
+>
+> > cb389277..86e232d 100644
+>
+> > --- a/drivers/pci/setup-bus.c
+>
+> > +++ b/drivers/pci/setup-bus.c
+>
+> > @@ -27,7 +27,7 @@
+>
+> >  #include <linux/slab.h>
+>
+> >  #include <linux/acpi.h>
+>
+> >  #include "pci.h"
+>
+> > -
+>
+> > +#include <linux/delay.h>
+>
+> >  unsigned int pci_flags;
+>
+> >
+>
+> >  struct pci_dev_resource {
+>
+> > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct pci_bus
+>
+> *bus)
+>
+> >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> >                                                0xffffffff);
+>
+> >                 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> > &tmp);
+>
+> > +               mdelay(100);
+>
+> > +               printk(KERN_ERR "sleep\n");
+>
+> > +                dump_stack();
+>
+> >                 if (!tmp)
+>
+> >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
+>
+> >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> >
+>
+>
+>
+> OK!
+>
+> I just sent a Linux patch that should help.
+>
+> I would appreciate it if you will give it a try and if that helps reply to
+>
+> it with a
+>
+> Tested-by: tag.
+>
+>
+>
+>
+I tested this patch and it works fine on my machine.
+>
+>
+But I have another question, if we only fix this problem in the kernel, the
+>
+Linux
+>
+version that has been released does not work well on the virtualization
+>
+platform.
+>
+Is there a way to fix this problem in the backend?
+There could we a way to work around this.
+Does below help?
+
+diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
+index 236a20eaa8..7834cac4b0 100644
+--- a/hw/i386/acpi-build.c
++++ b/hw/i386/acpi-build.c
+@@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, 
+PCIBus *bus,
+ 
+         aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
+         aml_append(method,
+-            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check */)
++            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device Check 
+Light */)
+         );
+         aml_append(method,
+             aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request */)
+
+>
+On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
+>
+> On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
+>
+> > > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > > > > > Hi all,
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > In our test, we configured VM with several pci-bridges and
+>
+> > > > > > > a virtio-net nic been attached with bus 4,
+>
+> > > > > > >
+>
+> > > > > > > After VM is startup, We ping this nic from host to judge
+>
+> > > > > > > if it is working normally. Then, we hot add pci devices to
+>
+> > > > > > > this VM with bus
+>
+> > 0.
+>
+> > > > > > >
+>
+> > > > > > > We  found the virtio-net NIC in bus 4 is not working (can
+>
+> > > > > > > not
+>
+> > > > > > > connect) occasionally, as it kick virtio backend failure with
+>
+> > > > > > > error
+>
+below:
+>
+> > > > > > >
+>
+> > > > > > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > memory-region: pci_bridge_pci
+>
+> > > > > > >
+>
+> > > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
+>
+> > > > > > > pci_bridge_pci
+>
+> > > > > > >
+>
+> > > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW):
+>
+> > > > > > > virtio-pci
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > > > > > virtio-pci-common
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > > > > > virtio-pci-isr
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > > > > > virtio-pci-device
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > > > > > virtio-pci-notify  <- io mem unassigned
+>
+> > > > > > >
+>
+> > > > > > >       …
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > We caught an exceptional address changing while this
+>
+> > > > > > > problem happened, show as
+>
+> > > > > > > follow:
+>
+> > > > > > >
+>
+> > > > > > > Before pci_bridge_update_mappings：
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fc000000-00000000fc1fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fc200000-00000000fc3fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fc400000-00000000fc5fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fc600000-00000000fc7fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fc800000-00000000fc9fffff
+>
+> > > > > > > <- correct Adress Spce
+>
+> > > > > > >
+>
+> > > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fca00000-00000000fcbfffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fcc00000-00000000fcdfffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fce00000-00000000fcffffff
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > After pci_bridge_update_mappings：
+>
+> > > > > > >
+>
+> > > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fda00000-00000000fdbfffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fdc00000-00000000fddfffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fde00000-00000000fdffffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fe000000-00000000fe1fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fe200000-00000000fe3fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fe400000-00000000fe5fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fe600000-00000000fe7fffff
+>
+> > > > > > >
+>
+> > > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW):
+>
+> > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > 00000000fe800000-00000000fe9fffff
+>
+> > > > > > >
+>
+> > > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW):
+>
+> > > > > > > alias
+>
+> > > > pci_bridge_pref_mem
+>
+> > > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <-
+>
+> > > > > > > Exceptional
+>
+> > Adress
+>
+> > > > > > Space
+>
+> > > > > >
+>
+> > > > > > This one is empty though right?
+>
+> > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > We have figured out why this address becomes this value,
+>
+> > > > > > > according to pci spec,  pci driver can get BAR address
+>
+> > > > > > > size by writing 0xffffffff to
+>
+> > > > > > >
+>
+> > > > > > > the pci register firstly, and then read back the value from this
+>
+register.
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > OK however as you show below the BAR being sized is the BAR
+>
+> > > > > > if a bridge. Are you then adding a bridge device by hotplug?
+>
+> > > > >
+>
+> > > > > No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> > > > > interesting phenomenon is If I hot plug the device to other
+>
+> > > > > bus, this doesn't
+>
+> > > > happened.
+>
+> > > > >
+>
+> > > > > >
+>
+> > > > > >
+>
+> > > > > > > We didn't handle this value  specially while process pci
+>
+> > > > > > > write in qemu, the function call stack is:
+>
+> > > > > > >
+>
+> > > > > > > Pci_bridge_dev_write_config
+>
+> > > > > > >
+>
+> > > > > > > -> pci_bridge_write_config
+>
+> > > > > > >
+>
+> > > > > > > -> pci_default_write_config (we update the config[address]
+>
+> > > > > > > -> value here to
+>
+> > > > > > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > > > > > >
+>
+> > > > > > > -> pci_bridge_update_mappings
+>
+> > > > > > >
+>
+> > > > > > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > > > > > >
+>
+> > > > > > > -> pci_bridge_region_init
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use
+>
+> > > > > > > -> the
+>
+> > > > > > > wrong value
+>
+> > > > > > > fffffffffc800000)
+>
+> > > > > > >
+>
+> > > > > > >                                                 ->
+>
+> > > > > > > memory_region_transaction_commit
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > So, as we can see, we use the wrong base address in qemu
+>
+> > > > > > > to update the memory regions, though, we update the base
+>
+> > > > > > > address to
+>
+> > > > > > >
+>
+> > > > > > > The correct value after pci driver in VM write the
+>
+> > > > > > > original value back, the virtio NIC in bus 4 may still
+>
+> > > > > > > sends net packets concurrently with
+>
+> > > > > > >
+>
+> > > > > > > The wrong memory region address.
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > We have tried to skip the memory region update action in
+>
+> > > > > > > qemu while detect pci write with 0xffffffff value, and it
+>
+> > > > > > > does work, but
+>
+> > > > > > >
+>
+> > > > > > > This seems to be not gently.
+>
+> > > > > >
+>
+> > > > > > For sure. But I'm still puzzled as to why does Linux try to
+>
+> > > > > > size the BAR of the bridge while a device behind it is used.
+>
+> > > > > >
+>
+> > > > > > Can you pls post your QEMU command line?
+>
+> > > > >
+>
+> > > > > My QEMU command line:
+>
+> > > > > /root/xyd/qemu-system-x86_64 -name
+>
+> > > > > guest=Linux,debug-threads=on -S -object
+>
+> > > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/dom
+>
+> > > > > ain-
+>
+> > > > > 194-
+>
+> > > > > Linux/master-key.aes -machine
+>
+> > > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> > > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> > > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off
+>
+> > > > > -smp
+>
+> > > > > 20,sockets=20,cores=1,threads=1 -numa
+>
+> > > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
+>
+> > > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> > > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> > > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> > > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config
+>
+> > > > > -nodefaults -chardev
+>
+> > > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Li
+>
+> > > > > nux/
+>
+> > > > > moni
+>
+> > > > > tor.sock,server,nowait -mon
+>
+> > > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc
+>
+> > > > > -no-hpet -global kvm-pit.lost_tick_policy=delay -no-shutdown
+>
+> > > > > -boot strict=on -device
+>
+> > > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> > > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> > > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> > > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> > > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> > > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> > > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> > > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> > > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> > > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> > > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> > > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> > > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id
+>
+> > > > > =dri
+>
+> > > > > ve-v
+>
+> > > > > irtio-disk0,cache=none -device
+>
+> > > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-
+>
+> > > > > disk
+>
+> > > > > 0,id
+>
+> > > > > =virtio-disk0,bootindex=1 -drive
+>
+> > > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> > > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1
+>
+> > > > > -netdev
+>
+> > > > > tap,fd=35,id=hostnet0 -device
+>
+> > > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,b
+>
+> > > > > us=p
+>
+> > > > > ci.4
+>
+> > > > > ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> > > > > isa-serial,chardev=charserial0,id=serial0 -device
+>
+> > > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> > > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
+>
+> > > > > timestamp=on
+>
+> > > > >
+>
+> > > > > I am also very curious about this issue, in the linux kernel
+>
+> > > > > code, maybe double
+>
+> > > > check in function pci_bridge_check_ranges triggered this problem.
+>
+> > > >
+>
+> > > > If you can get the stacktrace in Linux when it tries to write
+>
+> > > > this fffff value, that would be quite helpful.
+>
+> > > >
+>
+> > >
+>
+> > > After I add mdelay(100) in function pci_bridge_check_ranges, this
+>
+> > > phenomenon is easier to reproduce, below is my modify in kernel:
+>
+> > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
+>
+> > > index cb389277..86e232d 100644
+>
+> > > --- a/drivers/pci/setup-bus.c
+>
+> > > +++ b/drivers/pci/setup-bus.c
+>
+> > > @@ -27,7 +27,7 @@
+>
+> > >  #include <linux/slab.h>
+>
+> > >  #include <linux/acpi.h>
+>
+> > >  #include "pci.h"
+>
+> > > -
+>
+> > > +#include <linux/delay.h>
+>
+> > >  unsigned int pci_flags;
+>
+> > >
+>
+> > >  struct pci_dev_resource {
+>
+> > > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct
+>
+> > > pci_bus
+>
+> > *bus)
+>
+> > >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> > >                                                0xffffffff);
+>
+> > >                 pci_read_config_dword(bridge,
+>
+> > > PCI_PREF_BASE_UPPER32, &tmp);
+>
+> > > +               mdelay(100);
+>
+> > > +               printk(KERN_ERR "sleep\n");
+>
+> > > +                dump_stack();
+>
+> > >                 if (!tmp)
+>
+> > >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
+>
+> > >                 pci_write_config_dword(bridge,
+>
+> > > PCI_PREF_BASE_UPPER32,
+>
+> > >
+>
+> >
+>
+> > OK!
+>
+> > I just sent a Linux patch that should help.
+>
+> > I would appreciate it if you will give it a try and if that helps
+>
+> > reply to it with a
+>
+> > Tested-by: tag.
+>
+> >
+>
+>
+>
+> I tested this patch and it works fine on my machine.
+>
+>
+>
+> But I have another question, if we only fix this problem in the
+>
+> kernel, the Linux version that has been released does not work well on the
+>
+virtualization platform.
+>
+> Is there a way to fix this problem in the backend?
+>
+>
+There could we a way to work around this.
+>
+Does below help?
+I am sorry to tell you, I tested this patch and it doesn't work fine.
+
+>
+>
+diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+236a20eaa8..7834cac4b0 100644
+>
+--- a/hw/i386/acpi-build.c
+>
++++ b/hw/i386/acpi-build.c
+>
+@@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+*parent_scope, PCIBus *bus,
+>
+>
+aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
+>
+aml_append(method,
+>
+-            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
+>
+*/)
+>
++            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
+>
++ Check Light */)
+>
+);
+>
+aml_append(method,
+>
+aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
+>
+*/)
+
+On Tue, Dec 11, 2018 at 03:51:09AM +0000, xuyandong wrote:
+>
+> There could we a way to work around this.
+>
+> Does below help?
+>
+>
+I am sorry to tell you, I tested this patch and it doesn't work fine.
+What happens?
+
+>
+>
+>
+> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+> 236a20eaa8..7834cac4b0 100644
+>
+> --- a/hw/i386/acpi-build.c
+>
+> +++ b/hw/i386/acpi-build.c
+>
+> @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+> *parent_scope, PCIBus *bus,
+>
+>
+>
+>          aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
+>
+>          aml_append(method,
+>
+> -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
+>
+> */)
+>
+> +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
+>
+> + Check Light */)
+>
+>          );
+>
+>          aml_append(method,
+>
+>              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
+>
+> */)
+
+On Tue, Dec 11, 2018 at 03:51:09AM +0000, xuyandong wrote:
+>
+> On Tue, Dec 11, 2018 at 02:55:43AM +0000, xuyandong wrote:
+>
+> > On Tue, Dec 11, 2018 at 01:47:37AM +0000, xuyandong wrote:
+>
+> > > > On Sat, Dec 08, 2018 at 11:58:59AM +0000, xuyandong wrote:
+>
+> > > > > > > > Hi all,
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > In our test, we configured VM with several pci-bridges and
+>
+> > > > > > > > a virtio-net nic been attached with bus 4,
+>
+> > > > > > > >
+>
+> > > > > > > > After VM is startup, We ping this nic from host to judge
+>
+> > > > > > > > if it is working normally. Then, we hot add pci devices to
+>
+> > > > > > > > this VM with bus
+>
+> > > 0.
+>
+> > > > > > > >
+>
+> > > > > > > > We  found the virtio-net NIC in bus 4 is not working (can
+>
+> > > > > > > > not
+>
+> > > > > > > > connect) occasionally, as it kick virtio backend failure with
+>
+> > > > > > > > error
+>
+> below:
+>
+> > > > > > > >
+>
+> > > > > > > >     Unassigned mem write 00000000fc803004 = 0x1
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > memory-region: pci_bridge_pci
+>
+> > > > > > > >
+>
+> > > > > > > >   0000000000000000-ffffffffffffffff (prio 0, RW):
+>
+> > > > > > > > pci_bridge_pci
+>
+> > > > > > > >
+>
+> > > > > > > >     00000000fc800000-00000000fc803fff (prio 1, RW):
+>
+> > > > > > > > virtio-pci
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc800000-00000000fc800fff (prio 0, RW):
+>
+> > > > > > > > virtio-pci-common
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc801000-00000000fc801fff (prio 0, RW):
+>
+> > > > > > > > virtio-pci-isr
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc802000-00000000fc802fff (prio 0, RW):
+>
+> > > > > > > > virtio-pci-device
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc803000-00000000fc803fff (prio 0, RW):
+>
+> > > > > > > > virtio-pci-notify  <- io mem unassigned
+>
+> > > > > > > >
+>
+> > > > > > > >       …
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > We caught an exceptional address changing while this
+>
+> > > > > > > > problem happened, show as
+>
+> > > > > > > > follow:
+>
+> > > > > > > >
+>
+> > > > > > > > Before pci_bridge_update_mappings：
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc000000-00000000fc1fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fc000000-00000000fc1fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc200000-00000000fc3fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fc200000-00000000fc3fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc400000-00000000fc5fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fc400000-00000000fc5fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc600000-00000000fc7fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fc600000-00000000fc7fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fc800000-00000000fc9fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fc800000-00000000fc9fffff
+>
+> > > > > > > > <- correct Adress Spce
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fca00000-00000000fcbfffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fca00000-00000000fcbfffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fcc00000-00000000fcdfffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fcc00000-00000000fcdfffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fce00000-00000000fcffffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_pref_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fce00000-00000000fcffffff
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > After pci_bridge_update_mappings：
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fda00000-00000000fdbfffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fda00000-00000000fdbfffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fdc00000-00000000fddfffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fdc00000-00000000fddfffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fde00000-00000000fdffffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fde00000-00000000fdffffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fe000000-00000000fe1fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fe000000-00000000fe1fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fe200000-00000000fe3fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fe200000-00000000fe3fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fe400000-00000000fe5fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fe400000-00000000fe5fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fe600000-00000000fe7fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fe600000-00000000fe7fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       00000000fe800000-00000000fe9fffff (prio 1, RW):
+>
+> > > > > > > > alias pci_bridge_mem @pci_bridge_pci
+>
+> > > > > > > > 00000000fe800000-00000000fe9fffff
+>
+> > > > > > > >
+>
+> > > > > > > >       fffffffffc800000-fffffffffc800000 (prio 1, RW):
+>
+> > > > > > > > alias
+>
+> > > > > pci_bridge_pref_mem
+>
+> > > > > > > > @pci_bridge_pci fffffffffc800000-fffffffffc800000   <-
+>
+> > > > > > > > Exceptional
+>
+> > > Adress
+>
+> > > > > > > Space
+>
+> > > > > > >
+>
+> > > > > > > This one is empty though right?
+>
+> > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > We have figured out why this address becomes this value,
+>
+> > > > > > > > according to pci spec,  pci driver can get BAR address
+>
+> > > > > > > > size by writing 0xffffffff to
+>
+> > > > > > > >
+>
+> > > > > > > > the pci register firstly, and then read back the value from
+>
+> > > > > > > > this
+>
+> register.
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > OK however as you show below the BAR being sized is the BAR
+>
+> > > > > > > if a bridge. Are you then adding a bridge device by hotplug?
+>
+> > > > > >
+>
+> > > > > > No, I just simply hot plugged a VFIO device to Bus 0, another
+>
+> > > > > > interesting phenomenon is If I hot plug the device to other
+>
+> > > > > > bus, this doesn't
+>
+> > > > > happened.
+>
+> > > > > >
+>
+> > > > > > >
+>
+> > > > > > >
+>
+> > > > > > > > We didn't handle this value  specially while process pci
+>
+> > > > > > > > write in qemu, the function call stack is:
+>
+> > > > > > > >
+>
+> > > > > > > > Pci_bridge_dev_write_config
+>
+> > > > > > > >
+>
+> > > > > > > > -> pci_bridge_write_config
+>
+> > > > > > > >
+>
+> > > > > > > > -> pci_default_write_config (we update the config[address]
+>
+> > > > > > > > -> value here to
+>
+> > > > > > > > fffffffffc800000, which should be 0xfc800000 )
+>
+> > > > > > > >
+>
+> > > > > > > > -> pci_bridge_update_mappings
+>
+> > > > > > > >
+>
+> > > > > > > >                 ->pci_bridge_region_del(br, br->windows);
+>
+> > > > > > > >
+>
+> > > > > > > > -> pci_bridge_region_init
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > -> pci_bridge_init_alias (here pci_bridge_get_base, we use
+>
+> > > > > > > > -> the
+>
+> > > > > > > > wrong value
+>
+> > > > > > > > fffffffffc800000)
+>
+> > > > > > > >
+>
+> > > > > > > >                                                 ->
+>
+> > > > > > > > memory_region_transaction_commit
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > So, as we can see, we use the wrong base address in qemu
+>
+> > > > > > > > to update the memory regions, though, we update the base
+>
+> > > > > > > > address to
+>
+> > > > > > > >
+>
+> > > > > > > > The correct value after pci driver in VM write the
+>
+> > > > > > > > original value back, the virtio NIC in bus 4 may still
+>
+> > > > > > > > sends net packets concurrently with
+>
+> > > > > > > >
+>
+> > > > > > > > The wrong memory region address.
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > >
+>
+> > > > > > > > We have tried to skip the memory region update action in
+>
+> > > > > > > > qemu while detect pci write with 0xffffffff value, and it
+>
+> > > > > > > > does work, but
+>
+> > > > > > > >
+>
+> > > > > > > > This seems to be not gently.
+>
+> > > > > > >
+>
+> > > > > > > For sure. But I'm still puzzled as to why does Linux try to
+>
+> > > > > > > size the BAR of the bridge while a device behind it is used.
+>
+> > > > > > >
+>
+> > > > > > > Can you pls post your QEMU command line?
+>
+> > > > > >
+>
+> > > > > > My QEMU command line:
+>
+> > > > > > /root/xyd/qemu-system-x86_64 -name
+>
+> > > > > > guest=Linux,debug-threads=on -S -object
+>
+> > > > > > secret,id=masterKey0,format=raw,file=/var/run/libvirt/qemu/dom
+>
+> > > > > > ain-
+>
+> > > > > > 194-
+>
+> > > > > > Linux/master-key.aes -machine
+>
+> > > > > > pc-i440fx-2.8,accel=kvm,usb=off,dump-guest-core=off -cpu
+>
+> > > > > > host,+kvm_pv_eoi -bios /usr/share/OVMF/OVMF.fd -m
+>
+> > > > > > size=4194304k,slots=256,maxmem=33554432k -realtime mlock=off
+>
+> > > > > > -smp
+>
+> > > > > > 20,sockets=20,cores=1,threads=1 -numa
+>
+> > > > > > node,nodeid=0,cpus=0-4,mem=1024 -numa
+>
+> > > > > > node,nodeid=1,cpus=5-9,mem=1024 -numa
+>
+> > > > > > node,nodeid=2,cpus=10-14,mem=1024 -numa
+>
+> > > > > > node,nodeid=3,cpus=15-19,mem=1024 -uuid
+>
+> > > > > > 34a588c7-b0f2-4952-b39c-47fae3411439 -no-user-config
+>
+> > > > > > -nodefaults -chardev
+>
+> > > > > > socket,id=charmonitor,path=/var/run/libvirt/qemu/domain-194-Li
+>
+> > > > > > nux/
+>
+> > > > > > moni
+>
+> > > > > > tor.sock,server,nowait -mon
+>
+> > > > > > chardev=charmonitor,id=monitor,mode=control -rtc base=utc
+>
+> > > > > > -no-hpet -global kvm-pit.lost_tick_policy=delay -no-shutdown
+>
+> > > > > > -boot strict=on -device
+>
+> > > > > > pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x8 -device
+>
+> > > > > > pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x9 -device
+>
+> > > > > > pci-bridge,chassis_nr=3,id=pci.3,bus=pci.0,addr=0xa -device
+>
+> > > > > > pci-bridge,chassis_nr=4,id=pci.4,bus=pci.0,addr=0xb -device
+>
+> > > > > > pci-bridge,chassis_nr=5,id=pci.5,bus=pci.0,addr=0xc -device
+>
+> > > > > > piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
+>
+> > > > > > usb-ehci,id=usb1,bus=pci.0,addr=0x10 -device
+>
+> > > > > > nec-usb-xhci,id=usb2,bus=pci.0,addr=0x11 -device
+>
+> > > > > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -device
+>
+> > > > > > virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x4 -device
+>
+> > > > > > virtio-scsi-pci,id=scsi2,bus=pci.0,addr=0x5 -device
+>
+> > > > > > virtio-scsi-pci,id=scsi3,bus=pci.0,addr=0x6 -device
+>
+> > > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 -drive
+>
+> > > > > > file=/mnt/sdb/xml/centos_74_x64_uefi.raw,format=raw,if=none,id
+>
+> > > > > > =dri
+>
+> > > > > > ve-v
+>
+> > > > > > irtio-disk0,cache=none -device
+>
+> > > > > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x2,drive=drive-virtio-
+>
+> > > > > > disk
+>
+> > > > > > 0,id
+>
+> > > > > > =virtio-disk0,bootindex=1 -drive
+>
+> > > > > > if=none,id=drive-ide0-1-1,readonly=on,cache=none -device
+>
+> > > > > > ide-cd,bus=ide.1,unit=1,drive=drive-ide0-1-1,id=ide0-1-1
+>
+> > > > > > -netdev
+>
+> > > > > > tap,fd=35,id=hostnet0 -device
+>
+> > > > > > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:89:5d:8b,b
+>
+> > > > > > us=p
+>
+> > > > > > ci.4
+>
+> > > > > > ,addr=0x1 -chardev pty,id=charserial0 -device
+>
+> > > > > > isa-serial,chardev=charserial0,id=serial0 -device
+>
+> > > > > > usb-tablet,id=input0,bus=usb.0,port=1 -vnc 0.0.0.0:0 -device
+>
+> > > > > > cirrus-vga,id=video0,vgamem_mb=8,bus=pci.0,addr=0x12 -device
+>
+> > > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xd -msg
+>
+> > > > > > timestamp=on
+>
+> > > > > >
+>
+> > > > > > I am also very curious about this issue, in the linux kernel
+>
+> > > > > > code, maybe double
+>
+> > > > > check in function pci_bridge_check_ranges triggered this problem.
+>
+> > > > >
+>
+> > > > > If you can get the stacktrace in Linux when it tries to write
+>
+> > > > > this fffff value, that would be quite helpful.
+>
+> > > > >
+>
+> > > >
+>
+> > > > After I add mdelay(100) in function pci_bridge_check_ranges, this
+>
+> > > > phenomenon is easier to reproduce, below is my modify in kernel:
+>
+> > > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
+>
+> > > > index cb389277..86e232d 100644
+>
+> > > > --- a/drivers/pci/setup-bus.c
+>
+> > > > +++ b/drivers/pci/setup-bus.c
+>
+> > > > @@ -27,7 +27,7 @@
+>
+> > > >  #include <linux/slab.h>
+>
+> > > >  #include <linux/acpi.h>
+>
+> > > >  #include "pci.h"
+>
+> > > > -
+>
+> > > > +#include <linux/delay.h>
+>
+> > > >  unsigned int pci_flags;
+>
+> > > >
+>
+> > > >  struct pci_dev_resource {
+>
+> > > > @@ -787,6 +787,9 @@ static void pci_bridge_check_ranges(struct
+>
+> > > > pci_bus
+>
+> > > *bus)
+>
+> > > >                 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+>
+> > > >                                                0xffffffff);
+>
+> > > >                 pci_read_config_dword(bridge,
+>
+> > > > PCI_PREF_BASE_UPPER32, &tmp);
+>
+> > > > +               mdelay(100);
+>
+> > > > +               printk(KERN_ERR "sleep\n");
+>
+> > > > +                dump_stack();
+>
+> > > >                 if (!tmp)
+>
+> > > >                         b_res[2].flags &= ~IORESOURCE_MEM_64;
+>
+> > > >                 pci_write_config_dword(bridge,
+>
+> > > > PCI_PREF_BASE_UPPER32,
+>
+> > > >
+>
+> > >
+>
+> > > OK!
+>
+> > > I just sent a Linux patch that should help.
+>
+> > > I would appreciate it if you will give it a try and if that helps
+>
+> > > reply to it with a
+>
+> > > Tested-by: tag.
+>
+> > >
+>
+> >
+>
+> > I tested this patch and it works fine on my machine.
+>
+> >
+>
+> > But I have another question, if we only fix this problem in the
+>
+> > kernel, the Linux version that has been released does not work well on the
+>
+> virtualization platform.
+>
+> > Is there a way to fix this problem in the backend?
+>
+>
+>
+> There could we a way to work around this.
+>
+> Does below help?
+>
+>
+I am sorry to tell you, I tested this patch and it doesn't work fine.
+>
+>
+>
+>
+> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+> 236a20eaa8..7834cac4b0 100644
+>
+> --- a/hw/i386/acpi-build.c
+>
+> +++ b/hw/i386/acpi-build.c
+>
+> @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+> *parent_scope, PCIBus *bus,
+>
+>
+>
+>          aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM")));
+>
+>          aml_append(method,
+>
+> -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check
+>
+> */)
+>
+> +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /* Device
+>
+> + Check Light */)
+>
+>          );
+>
+>          aml_append(method,
+>
+>              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request
+>
+> */)
+Oh I see, another bug:
+
+        case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
+                acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT 
+event\n");
+                /* TBD: Exactly what does 'light' mean? */
+                break;
+
+And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
+and friends all just ignore this event type.
+
+
+
+-- 
+MST
+
+>
+> > > > > > > > > Hi all,
+>
+> > > > > > > > >
+>
+> > > > > > > > >
+>
+> > > > > > > > >
+>
+> > > > > > > > > In our test, we configured VM with several pci-bridges
+>
+> > > > > > > > > and a virtio-net nic been attached with bus 4,
+>
+> > > > > > > > >
+>
+> > > > > > > > > After VM is startup, We ping this nic from host to
+>
+> > > > > > > > > judge if it is working normally. Then, we hot add pci
+>
+> > > > > > > > > devices to this VM with bus
+>
+> > > > 0.
+>
+> > > > > > > > >
+>
+> > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
+>
+> > > > > > > > > (can not
+>
+> > > > > > > > > connect) occasionally, as it kick virtio backend
+>
+> > > > > > > > > failure with error
+>
+> > > But I have another question, if we only fix this problem in the
+>
+> > > kernel, the Linux version that has been released does not work
+>
+> > > well on the
+>
+> > virtualization platform.
+>
+> > > Is there a way to fix this problem in the backend?
+>
+> >
+>
+> > There could we a way to work around this.
+>
+> > Does below help?
+>
+>
+>
+> I am sorry to tell you, I tested this patch and it doesn't work fine.
+>
+>
+>
+> >
+>
+> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+> > 236a20eaa8..7834cac4b0 100644
+>
+> > --- a/hw/i386/acpi-build.c
+>
+> > +++ b/hw/i386/acpi-build.c
+>
+> > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+> > *parent_scope, PCIBus *bus,
+>
+> >
+>
+> >          aml_append(method, aml_store(aml_int(bsel_val),
+>
+aml_name("BNUM")));
+>
+> >          aml_append(method,
+>
+> > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
+>
+> > Check
+>
+*/)
+>
+> > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
+>
+> > + Device Check Light */)
+>
+> >          );
+>
+> >          aml_append(method,
+>
+> >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject
+>
+> > Request */)
+>
+>
+>
+Oh I see, another bug:
+>
+>
+case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
+>
+acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT
+>
+event\n");
+>
+/* TBD: Exactly what does 'light' mean? */
+>
+break;
+>
+>
+And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
+>
+and friends all just ignore this event type.
+>
+>
+>
+>
+--
+>
+MST
+Hi Michael,
+
+If we want to fix this problem on the backend, it is not enough to consider 
+only PCI
+device hot plugging, because I found that if we use a command like
+"echo 1 > /sys/bus/pci/rescan" in guest, this problem is very easy to reproduce.
+
+From the perspective of device emulation, when guest writes 0xffffffff to the 
+BAR,
+guest just want to get the size of the region but not really updating the 
+address space.
+So I made the following patch to avoid  update pci mapping.
+
+Do you think this make sense?
+
+[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
+
+When guest writes 0xffffffff to the BAR, guest just want to get the size of the 
+region
+but not really updating the address space.
+So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings 
+or pci_bridge_update_mappings.
+
+Signed-off-by: xuyandong <address@hidden>
+---
+ hw/pci/pci.c        | 6 ++++--
+ hw/pci/pci_bridge.c | 8 +++++---
+ 2 files changed, 9 insertions(+), 5 deletions(-)
+
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+index 56b13b3..ef368e1 100644
+--- a/hw/pci/pci.c
++++ b/hw/pci/pci.c
+@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
+addr, uint32_t val_in, int
+ {
+     int i, was_irq_disabled = pci_irq_disabled(d);
+     uint32_t val = val_in;
++    uint64_t barmask = (1 << l*8) - 1;
+ 
+     for (i = 0; i < l; val >>= 8, ++i) {
+         uint8_t wmask = d->wmask[addr + i];
+@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
+addr, uint32_t val_in, int
+         d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
+         d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+     }
+-    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
++    if ((val_in != barmask &&
++       (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+         ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+-        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
++        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+         range_covers_byte(addr, l, PCI_COMMAND))
+         pci_update_mappings(d);
+ 
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+index ee9dff2..f2bad79 100644
+--- a/hw/pci/pci_bridge.c
++++ b/hw/pci/pci_bridge.c
+@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
+     PCIBridge *s = PCI_BRIDGE(d);
+     uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+     uint16_t newctl;
++    uint64_t barmask = (1 << len * 8) - 1;
+ 
+     pci_default_write_config(d, address, val, len);
+ 
+     if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+ 
+-        /* io base/limit */
+-        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
++        (val != barmask &&
++       /* io base/limit */
++        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+ 
+         /* memory base/limit, prefetchable base/limit and
+            io base/limit upper 16 */
+-        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
++        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
+ 
+         /* vga enable */
+         ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+-- 
+1.8.3.1
+
+On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
+>
+> > > > > > > > > > Hi all,
+>
+> > > > > > > > > >
+>
+> > > > > > > > > >
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > In our test, we configured VM with several pci-bridges
+>
+> > > > > > > > > > and a virtio-net nic been attached with bus 4,
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > After VM is startup, We ping this nic from host to
+>
+> > > > > > > > > > judge if it is working normally. Then, we hot add pci
+>
+> > > > > > > > > > devices to this VM with bus
+>
+> > > > > 0.
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
+>
+> > > > > > > > > > (can not
+>
+> > > > > > > > > > connect) occasionally, as it kick virtio backend
+>
+> > > > > > > > > > failure with error
+>
+>
+> > > > But I have another question, if we only fix this problem in the
+>
+> > > > kernel, the Linux version that has been released does not work
+>
+> > > > well on the
+>
+> > > virtualization platform.
+>
+> > > > Is there a way to fix this problem in the backend?
+>
+> > >
+>
+> > > There could we a way to work around this.
+>
+> > > Does below help?
+>
+> >
+>
+> > I am sorry to tell you, I tested this patch and it doesn't work fine.
+>
+> >
+>
+> > >
+>
+> > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+> > > 236a20eaa8..7834cac4b0 100644
+>
+> > > --- a/hw/i386/acpi-build.c
+>
+> > > +++ b/hw/i386/acpi-build.c
+>
+> > > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+> > > *parent_scope, PCIBus *bus,
+>
+> > >
+>
+> > >          aml_append(method, aml_store(aml_int(bsel_val),
+>
+> aml_name("BNUM")));
+>
+> > >          aml_append(method,
+>
+> > > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
+>
+> > > Check
+>
+> */)
+>
+> > > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
+>
+> > > + Device Check Light */)
+>
+> > >          );
+>
+> > >          aml_append(method,
+>
+> > >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject
+>
+> > > Request */)
+>
+>
+>
+>
+>
+> Oh I see, another bug:
+>
+>
+>
+>         case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
+>
+>                 acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT
+>
+> event\n");
+>
+>                 /* TBD: Exactly what does 'light' mean? */
+>
+>                 break;
+>
+>
+>
+> And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
+>
+> and friends all just ignore this event type.
+>
+>
+>
+>
+>
+>
+>
+> --
+>
+> MST
+>
+>
+Hi Michael,
+>
+>
+If we want to fix this problem on the backend, it is not enough to consider
+>
+only PCI
+>
+device hot plugging, because I found that if we use a command like
+>
+"echo 1 > /sys/bus/pci/rescan" in guest, this problem is very easy to
+>
+reproduce.
+>
+>
+From the perspective of device emulation, when guest writes 0xffffffff to the
+>
+BAR,
+>
+guest just want to get the size of the region but not really updating the
+>
+address space.
+>
+So I made the following patch to avoid  update pci mapping.
+>
+>
+Do you think this make sense?
+>
+>
+[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
+>
+>
+When guest writes 0xffffffff to the BAR, guest just want to get the size of
+>
+the region
+>
+but not really updating the address space.
+>
+So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings
+>
+or pci_bridge_update_mappings.
+>
+>
+Signed-off-by: xuyandong <address@hidden>
+I see how that will address the common case however there are a bunch of
+issues here.  First of all it's easy to trigger the update by some other
+action like VM migration.  More importantly it's just possible that
+guest actually does want to set the low 32 bit of the address to all
+ones.  For example, that is clearly listed as a way to disable all
+devices behind the bridge in the pci to pci bridge spec.
+
+Given upstream is dragging it's feet I'm open to adding a flag
+that will help keep guests going as a temporary measure.
+We will need to think about ways to restrict this as much as
+we can.
+
+
+>
+---
+>
+hw/pci/pci.c        | 6 ++++--
+>
+hw/pci/pci_bridge.c | 8 +++++---
+>
+2 files changed, 9 insertions(+), 5 deletions(-)
+>
+>
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+>
+index 56b13b3..ef368e1 100644
+>
+--- a/hw/pci/pci.c
+>
++++ b/hw/pci/pci.c
+>
+@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t
+>
+addr, uint32_t val_in, int
+>
+{
+>
+int i, was_irq_disabled = pci_irq_disabled(d);
+>
+uint32_t val = val_in;
+>
++    uint64_t barmask = (1 << l*8) - 1;
+>
+>
+for (i = 0; i < l; val >>= 8, ++i) {
+>
+uint8_t wmask = d->wmask[addr + i];
+>
+@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t
+>
+addr, uint32_t val_in, int
+>
+d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
+>
+d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+>
+}
+>
+-    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
++    if ((val_in != barmask &&
+>
++     (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+>
+-        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
+>
++        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+>
+range_covers_byte(addr, l, PCI_COMMAND))
+>
+pci_update_mappings(d);
+>
+>
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+>
+index ee9dff2..f2bad79 100644
+>
+--- a/hw/pci/pci_bridge.c
+>
++++ b/hw/pci/pci_bridge.c
+>
+@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+PCIBridge *s = PCI_BRIDGE(d);
+>
+uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+>
+uint16_t newctl;
+>
++    uint64_t barmask = (1 << len * 8) - 1;
+>
+>
+pci_default_write_config(d, address, val, len);
+>
+>
+if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+-        /* io base/limit */
+>
+-        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
++        (val != barmask &&
+>
++     /* io base/limit */
+>
++        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+>
+/* memory base/limit, prefetchable base/limit and
+>
+io base/limit upper 16 */
+>
+-        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
++        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
+>
+>
+/* vga enable */
+>
+ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+--
+>
+1.8.3.1
+>
+>
+>
+
+>
+-----Original Message-----
+>
+From: Michael S. Tsirkin [
+mailto:address@hidden
+>
+Sent: Monday, January 07, 2019 11:06 PM
+>
+To: xuyandong <address@hidden>
+>
+Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
+>
+address@hidden; Zhanghailiang <address@hidden>;
+>
+wangxin (U) <address@hidden>; Huangweidong (C)
+>
+<address@hidden>
+>
+Subject: Re: [BUG]Unassigned mem write during pci device hot-plug
+>
+>
+On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
+>
+> > > > > > > > > > > Hi all,
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > > In our test, we configured VM with several
+>
+> > > > > > > > > > > pci-bridges and a virtio-net nic been attached
+>
+> > > > > > > > > > > with bus 4,
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > > After VM is startup, We ping this nic from host to
+>
+> > > > > > > > > > > judge if it is working normally. Then, we hot add
+>
+> > > > > > > > > > > pci devices to this VM with bus
+>
+> > > > > > 0.
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > > We  found the virtio-net NIC in bus 4 is not
+>
+> > > > > > > > > > > working (can not
+>
+> > > > > > > > > > > connect) occasionally, as it kick virtio backend
+>
+> > > > > > > > > > > failure with error
+>
+>
+>
+> > > > > But I have another question, if we only fix this problem in
+>
+> > > > > the kernel, the Linux version that has been released does not
+>
+> > > > > work well on the
+>
+> > > > virtualization platform.
+>
+> > > > > Is there a way to fix this problem in the backend?
+>
+>
+>
+> Hi Michael,
+>
+>
+>
+> If we want to fix this problem on the backend, it is not enough to
+>
+> consider only PCI device hot plugging, because I found that if we use
+>
+> a command like "echo 1 > /sys/bus/pci/rescan" in guest, this problem is very
+>
+easy to reproduce.
+>
+>
+>
+> From the perspective of device emulation, when guest writes 0xffffffff
+>
+> to the BAR, guest just want to get the size of the region but not really
+>
+updating the address space.
+>
+> So I made the following patch to avoid  update pci mapping.
+>
+>
+>
+> Do you think this make sense?
+>
+>
+>
+> [PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
+>
+>
+>
+> When guest writes 0xffffffff to the BAR, guest just want to get the
+>
+> size of the region but not really updating the address space.
+>
+> So when guest writes 0xffffffff to BAR, we need avoid
+>
+> pci_update_mappings or pci_bridge_update_mappings.
+>
+>
+>
+> Signed-off-by: xuyandong <address@hidden>
+>
+>
+I see how that will address the common case however there are a bunch of
+>
+issues here.  First of all it's easy to trigger the update by some other
+>
+action like
+>
+VM migration.  More importantly it's just possible that guest actually does
+>
+want
+>
+to set the low 32 bit of the address to all ones.  For example, that is
+>
+clearly
+>
+listed as a way to disable all devices behind the bridge in the pci to pci
+>
+bridge
+>
+spec.
+Ok, I see. If I only skip upate when guest writing 0xFFFFFFFF to Prefetcable 
+Base Upper 32 Bits
+to meet the kernel double check problem.
+Do you think there is still risk?
+
+>
+>
+Given upstream is dragging it's feet I'm open to adding a flag that will help
+>
+keep guests going as a temporary measure.
+>
+We will need to think about ways to restrict this as much as we can.
+>
+>
+>
+> ---
+>
+>  hw/pci/pci.c        | 6 ++++--
+>
+>  hw/pci/pci_bridge.c | 8 +++++---
+>
+>  2 files changed, 9 insertions(+), 5 deletions(-)
+>
+>
+>
+> diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
+>
+> --- a/hw/pci/pci.c
+>
+> +++ b/hw/pci/pci.c
+>
+> @@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d,
+>
+> uint32_t addr, uint32_t val_in, int  {
+>
+>      int i, was_irq_disabled = pci_irq_disabled(d);
+>
+>      uint32_t val = val_in;
+>
+> +    uint64_t barmask = (1 << l*8) - 1;
+>
+>
+>
+>      for (i = 0; i < l; val >>= 8, ++i) {
+>
+>          uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@
+>
+> void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in,
+>
+int
+>
+>          d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val &
+>
+> wmask);
+>
+>          d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear
+>
+> */
+>
+>      }
+>
+> -    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+> +    if ((val_in != barmask &&
+>
+> +   (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+>          ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+>
+> -        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
+>
+> +        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+>
+>          range_covers_byte(addr, l, PCI_COMMAND))
+>
+>          pci_update_mappings(d);
+>
+>
+>
+> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index
+>
+> ee9dff2..f2bad79 100644
+>
+> --- a/hw/pci/pci_bridge.c
+>
+> +++ b/hw/pci/pci_bridge.c
+>
+> @@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+>      PCIBridge *s = PCI_BRIDGE(d);
+>
+>      uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+>
+>      uint16_t newctl;
+>
+> +    uint64_t barmask = (1 << len * 8) - 1;
+>
+>
+>
+>      pci_default_write_config(d, address, val, len);
+>
+>
+>
+>      if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+>
+> -        /* io base/limit */
+>
+> -        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+> +        (val != barmask &&
+>
+> +   /* io base/limit */
+>
+> +        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+>
+>
+>          /* memory base/limit, prefetchable base/limit and
+>
+>             io base/limit upper 16 */
+>
+> -        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+> +        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
+>
+>
+>
+>          /* vga enable */
+>
+>          ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+> --
+>
+> 1.8.3.1
+>
+>
+>
+>
+>
+>
+
+On Mon, Jan 07, 2019 at 03:28:36PM +0000, xuyandong wrote:
+>
+>
+>
+> -----Original Message-----
+>
+> From: Michael S. Tsirkin [
+mailto:address@hidden
+>
+> Sent: Monday, January 07, 2019 11:06 PM
+>
+> To: xuyandong <address@hidden>
+>
+> Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
+>
+> address@hidden; Zhanghailiang <address@hidden>;
+>
+> wangxin (U) <address@hidden>; Huangweidong (C)
+>
+> <address@hidden>
+>
+> Subject: Re: [BUG]Unassigned mem write during pci device hot-plug
+>
+>
+>
+> On Mon, Jan 07, 2019 at 02:37:17PM +0000, xuyandong wrote:
+>
+> > > > > > > > > > > > Hi all,
+>
+> > > > > > > > > > > >
+>
+> > > > > > > > > > > >
+>
+> > > > > > > > > > > >
+>
+> > > > > > > > > > > > In our test, we configured VM with several
+>
+> > > > > > > > > > > > pci-bridges and a virtio-net nic been attached
+>
+> > > > > > > > > > > > with bus 4,
+>
+> > > > > > > > > > > >
+>
+> > > > > > > > > > > > After VM is startup, We ping this nic from host to
+>
+> > > > > > > > > > > > judge if it is working normally. Then, we hot add
+>
+> > > > > > > > > > > > pci devices to this VM with bus
+>
+> > > > > > > 0.
+>
+> > > > > > > > > > > >
+>
+> > > > > > > > > > > > We  found the virtio-net NIC in bus 4 is not
+>
+> > > > > > > > > > > > working (can not
+>
+> > > > > > > > > > > > connect) occasionally, as it kick virtio backend
+>
+> > > > > > > > > > > > failure with error
+>
+> >
+>
+> > > > > > But I have another question, if we only fix this problem in
+>
+> > > > > > the kernel, the Linux version that has been released does not
+>
+> > > > > > work well on the
+>
+> > > > > virtualization platform.
+>
+> > > > > > Is there a way to fix this problem in the backend?
+>
+> >
+>
+> > Hi Michael,
+>
+> >
+>
+> > If we want to fix this problem on the backend, it is not enough to
+>
+> > consider only PCI device hot plugging, because I found that if we use
+>
+> > a command like "echo 1 > /sys/bus/pci/rescan" in guest, this problem is
+>
+> > very
+>
+> easy to reproduce.
+>
+> >
+>
+> > From the perspective of device emulation, when guest writes 0xffffffff
+>
+> > to the BAR, guest just want to get the size of the region but not really
+>
+> updating the address space.
+>
+> > So I made the following patch to avoid  update pci mapping.
+>
+> >
+>
+> > Do you think this make sense?
+>
+> >
+>
+> > [PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
+>
+> >
+>
+> > When guest writes 0xffffffff to the BAR, guest just want to get the
+>
+> > size of the region but not really updating the address space.
+>
+> > So when guest writes 0xffffffff to BAR, we need avoid
+>
+> > pci_update_mappings or pci_bridge_update_mappings.
+>
+> >
+>
+> > Signed-off-by: xuyandong <address@hidden>
+>
+>
+>
+> I see how that will address the common case however there are a bunch of
+>
+> issues here.  First of all it's easy to trigger the update by some other
+>
+> action like
+>
+> VM migration.  More importantly it's just possible that guest actually does
+>
+> want
+>
+> to set the low 32 bit of the address to all ones.  For example, that is
+>
+> clearly
+>
+> listed as a way to disable all devices behind the bridge in the pci to pci
+>
+> bridge
+>
+> spec.
+>
+>
+Ok, I see. If I only skip upate when guest writing 0xFFFFFFFF to Prefetcable
+>
+Base Upper 32 Bits
+>
+to meet the kernel double check problem.
+>
+Do you think there is still risk?
+Well it's non zero since spec says such a write should disable all
+accesses. Just an idea: why not add an option to disable upper 32 bit?
+That is ugly and limits space but spec compliant.
+
+>
+>
+>
+> Given upstream is dragging it's feet I'm open to adding a flag that will
+>
+> help
+>
+> keep guests going as a temporary measure.
+>
+> We will need to think about ways to restrict this as much as we can.
+>
+>
+>
+>
+>
+> > ---
+>
+> >  hw/pci/pci.c        | 6 ++++--
+>
+> >  hw/pci/pci_bridge.c | 8 +++++---
+>
+> >  2 files changed, 9 insertions(+), 5 deletions(-)
+>
+> >
+>
+> > diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
+>
+> > --- a/hw/pci/pci.c
+>
+> > +++ b/hw/pci/pci.c
+>
+> > @@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d,
+>
+> > uint32_t addr, uint32_t val_in, int  {
+>
+> >      int i, was_irq_disabled = pci_irq_disabled(d);
+>
+> >      uint32_t val = val_in;
+>
+> > +    uint64_t barmask = (1 << l*8) - 1;
+>
+> >
+>
+> >      for (i = 0; i < l; val >>= 8, ++i) {
+>
+> >          uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@
+>
+> > void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t
+>
+> > val_in,
+>
+> int
+>
+> >          d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val &
+>
+> > wmask);
+>
+> >          d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to
+>
+> > Clear */
+>
+> >      }
+>
+> > -    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+> > +    if ((val_in != barmask &&
+>
+> > + (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+> >          ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+>
+> > -        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
+>
+> > +        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+>
+> >          range_covers_byte(addr, l, PCI_COMMAND))
+>
+> >          pci_update_mappings(d);
+>
+> >
+>
+> > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index
+>
+> > ee9dff2..f2bad79 100644
+>
+> > --- a/hw/pci/pci_bridge.c
+>
+> > +++ b/hw/pci/pci_bridge.c
+>
+> > @@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+> >      PCIBridge *s = PCI_BRIDGE(d);
+>
+> >      uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+>
+> >      uint16_t newctl;
+>
+> > +    uint64_t barmask = (1 << len * 8) - 1;
+>
+> >
+>
+> >      pci_default_write_config(d, address, val, len);
+>
+> >
+>
+> >      if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+> >
+>
+> > -        /* io base/limit */
+>
+> > -        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+> > +        (val != barmask &&
+>
+> > + /* io base/limit */
+>
+> > +        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+> >
+>
+> >          /* memory base/limit, prefetchable base/limit and
+>
+> >             io base/limit upper 16 */
+>
+> > -        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
+> > +        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
+>
+> >
+>
+> >          /* vga enable */
+>
+> >          ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+> > --
+>
+> > 1.8.3.1
+>
+> >
+>
+> >
+>
+> >
+
+>
+-----Original Message-----
+>
+From: xuyandong
+>
+Sent: Monday, January 07, 2019 10:37 PM
+>
+To: 'Michael S. Tsirkin' <address@hidden>
+>
+Cc: address@hidden; Paolo Bonzini <address@hidden>; qemu-
+>
+address@hidden; Zhanghailiang <address@hidden>;
+>
+wangxin (U) <address@hidden>; Huangweidong (C)
+>
+<address@hidden>
+>
+Subject: RE: [BUG]Unassigned mem write during pci device hot-plug
+>
+>
+> > > > > > > > > > Hi all,
+>
+> > > > > > > > > >
+>
+> > > > > > > > > >
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > In our test, we configured VM with several
+>
+> > > > > > > > > > pci-bridges and a virtio-net nic been attached with
+>
+> > > > > > > > > > bus 4,
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > After VM is startup, We ping this nic from host to
+>
+> > > > > > > > > > judge if it is working normally. Then, we hot add
+>
+> > > > > > > > > > pci devices to this VM with bus
+>
+> > > > > 0.
+>
+> > > > > > > > > >
+>
+> > > > > > > > > > We  found the virtio-net NIC in bus 4 is not working
+>
+> > > > > > > > > > (can not
+>
+> > > > > > > > > > connect) occasionally, as it kick virtio backend
+>
+> > > > > > > > > > failure with error
+>
+>
+> > > > But I have another question, if we only fix this problem in the
+>
+> > > > kernel, the Linux version that has been released does not work
+>
+> > > > well on the
+>
+> > > virtualization platform.
+>
+> > > > Is there a way to fix this problem in the backend?
+>
+> > >
+>
+> > > There could we a way to work around this.
+>
+> > > Does below help?
+>
+> >
+>
+> > I am sorry to tell you, I tested this patch and it doesn't work fine.
+>
+> >
+>
+> > >
+>
+> > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index
+>
+> > > 236a20eaa8..7834cac4b0 100644
+>
+> > > --- a/hw/i386/acpi-build.c
+>
+> > > +++ b/hw/i386/acpi-build.c
+>
+> > > @@ -551,7 +551,7 @@ static void build_append_pci_bus_devices(Aml
+>
+> > > *parent_scope, PCIBus *bus,
+>
+> > >
+>
+> > >          aml_append(method, aml_store(aml_int(bsel_val),
+>
+> aml_name("BNUM")));
+>
+> > >          aml_append(method,
+>
+> > > -            aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device
+>
+Check
+>
+> */)
+>
+> > > +            aml_call2("DVNT", aml_name("PCIU"), aml_int(4) /*
+>
+> > > + Device Check Light */)
+>
+> > >          );
+>
+> > >          aml_append(method,
+>
+> > >              aml_call2("DVNT", aml_name("PCID"), aml_int(3)/*
+>
+> > > Eject Request */)
+>
+>
+>
+>
+>
+> Oh I see, another bug:
+>
+>
+>
+>         case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
+>
+>                 acpi_handle_debug(handle,
+>
+> "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n");
+>
+>                 /* TBD: Exactly what does 'light' mean? */
+>
+>                 break;
+>
+>
+>
+> And then e.g. acpi_generic_hotplug_event(struct acpi_device *adev, u32
+>
+> type) and friends all just ignore this event type.
+>
+>
+>
+>
+>
+>
+>
+> --
+>
+> MST
+>
+>
+Hi Michael,
+>
+>
+If we want to fix this problem on the backend, it is not enough to consider
+>
+only
+>
+PCI device hot plugging, because I found that if we use a command like "echo
+>
+1 >
+>
+/sys/bus/pci/rescan" in guest, this problem is very easy to reproduce.
+>
+>
+From the perspective of device emulation, when guest writes 0xffffffff to the
+>
+BAR, guest just want to get the size of the region but not really updating the
+>
+address space.
+>
+So I made the following patch to avoid  update pci mapping.
+>
+>
+Do you think this make sense?
+>
+>
+[PATCH] pci: avoid update pci mapping when writing 0xFFFF FFFF to BAR
+>
+>
+When guest writes 0xffffffff to the BAR, guest just want to get the size of
+>
+the
+>
+region but not really updating the address space.
+>
+So when guest writes 0xffffffff to BAR, we need avoid pci_update_mappings or
+>
+pci_bridge_update_mappings.
+>
+>
+Signed-off-by: xuyandong <address@hidden>
+>
+---
+>
+hw/pci/pci.c        | 6 ++++--
+>
+hw/pci/pci_bridge.c | 8 +++++---
+>
+2 files changed, 9 insertions(+), 5 deletions(-)
+>
+>
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 56b13b3..ef368e1 100644
+>
+--- a/hw/pci/pci.c
+>
++++ b/hw/pci/pci.c
+>
+@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t
+>
+addr, uint32_t val_in, int  {
+>
+int i, was_irq_disabled = pci_irq_disabled(d);
+>
+uint32_t val = val_in;
+>
++    uint64_t barmask = (1 << l*8) - 1;
+>
+>
+for (i = 0; i < l; val >>= 8, ++i) {
+>
+uint8_t wmask = d->wmask[addr + i]; @@ -1369,9 +1370,10 @@ void
+>
+pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int
+>
+d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
+>
+d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+>
+}
+>
+-    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
++    if ((val_in != barmask &&
+>
++     (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+>
+ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+>
+-        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
+>
++        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+>
+range_covers_byte(addr, l, PCI_COMMAND))
+>
+pci_update_mappings(d);
+>
+>
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index ee9dff2..f2bad79
+>
+100644
+>
+--- a/hw/pci/pci_bridge.c
+>
++++ b/hw/pci/pci_bridge.c
+>
+@@ -253,17 +253,19 @@ void pci_bridge_write_config(PCIDevice *d,
+>
+PCIBridge *s = PCI_BRIDGE(d);
+>
+uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+>
+uint16_t newctl;
+>
++    uint64_t barmask = (1 << len * 8) - 1;
+>
+>
+pci_default_write_config(d, address, val, len);
+>
+>
+if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+>
+>
+-        /* io base/limit */
+>
+-        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
++        (val != barmask &&
+>
++     /* io base/limit */
+>
++        (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+>
+>
+/* memory base/limit, prefetchable base/limit and
+>
+io base/limit upper 16 */
+>
+-        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
+>
++        ranges_overlap(address, len, PCI_MEMORY_BASE, 20))) ||
+>
+>
+/* vga enable */
+>
+ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
+>
+--
+>
+1.8.3.1
+>
+>
+Sorry, please ignore the patch above.
+
+Here is the patch I want to post:
+
+diff --git a/hw/pci/pci.c b/hw/pci/pci.c
+index 56b13b3..38a300f 100644
+--- a/hw/pci/pci.c
++++ b/hw/pci/pci.c
+@@ -1361,6 +1361,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
+addr, uint32_t val_in, int
+ {
+     int i, was_irq_disabled = pci_irq_disabled(d);
+     uint32_t val = val_in;
++    uint64_t barmask = ((uint64_t)1 << l*8) - 1;
+ 
+     for (i = 0; i < l; val >>= 8, ++i) {
+         uint8_t wmask = d->wmask[addr + i];
+@@ -1369,9 +1370,10 @@ void pci_default_write_config(PCIDevice *d, uint32_t 
+addr, uint32_t val_in, int
+         d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask);
+         d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+     }
+-    if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
++    if ((val_in != barmask &&
++       (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) ||
+         ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) ||
+-        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
++        ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4))) ||
+         range_covers_byte(addr, l, PCI_COMMAND))
+         pci_update_mappings(d);
+ 
+diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
+index ee9dff2..b8f7d48 100644
+--- a/hw/pci/pci_bridge.c
++++ b/hw/pci/pci_bridge.c
+@@ -253,20 +253,22 @@ void pci_bridge_write_config(PCIDevice *d,
+     PCIBridge *s = PCI_BRIDGE(d);
+     uint16_t oldctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
+     uint16_t newctl;
++    uint64_t barmask = ((uint64_t)1 << len * 8) - 1;
+ 
+     pci_default_write_config(d, address, val, len);
+ 
+     if (ranges_overlap(address, len, PCI_COMMAND, 2) ||
+ 
+-        /* io base/limit */
+-        ranges_overlap(address, len, PCI_IO_BASE, 2) ||
++        /* vga enable */
++        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2) ||
+ 
+-        /* memory base/limit, prefetchable base/limit and
+-           io base/limit upper 16 */
+-        ranges_overlap(address, len, PCI_MEMORY_BASE, 20) ||
++        (val != barmask &&
++        /* io base/limit */
++         (ranges_overlap(address, len, PCI_IO_BASE, 2) ||
+ 
+-        /* vga enable */
+-        ranges_overlap(address, len, PCI_BRIDGE_CONTROL, 2)) {
++         /* memory base/limit, prefetchable base/limit and
++            io base/limit upper 16 */
++         ranges_overlap(address, len, PCI_MEMORY_BASE, 20)))) {
+         pci_bridge_update_mappings(s);
+     }
+ 
+-- 
+1.8.3.1
+
diff --git a/results/classifier/zero-shot/010/review/70294255 b/results/classifier/zero-shot/010/review/70294255
new file mode 100644
index 00000000..c95bfa4a
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/70294255
@@ -0,0 +1,1085 @@
+PID: 0.859
+semantic: 0.858
+socket: 0.858
+device: 0.857
+graphic: 0.857
+debug: 0.854
+permissions: 0.854
+other: 0.852
+performance: 0.850
+network: 0.846
+vnc: 0.837
+files: 0.832
+boot: 0.811
+KVM: 0.806
+socket: 0.753
+debug: 0.454
+network: 0.316
+files: 0.213
+performance: 0.044
+other: 0.040
+permissions: 0.032
+device: 0.025
+PID: 0.021
+boot: 0.014
+KVM: 0.013
+semantic: 0.011
+vnc: 0.006
+graphic: 0.003
+
+[Qemu-devel] 答复: Re:   答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
+
+hi:
+
+yes.it is better.
+
+And should we delete 
+
+
+
+
+#ifdef WIN32
+
+    QIO_CHANNEL(cioc)-＞event = CreateEvent(NULL, FALSE, FALSE, NULL)
+
+#endif
+
+
+
+
+in qio_channel_socket_accept？
+
+qio_channel_socket_new already have it.
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992
+抄送人： address@hidden address@hidden address@hidden address@hidden
+日 期 ：2017年03月22日 15:03
+主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
+
+
+
+
+
+Hi,
+
+On 2017/3/22 9:42, address@hidden wrote:
+＞ diff --git a/migration/socket.c b/migration/socket.c
+＞
+＞
+＞ index 13966f1..d65a0ea 100644
+＞
+＞
+＞ --- a/migration/socket.c
+＞
+＞
+＞ +++ b/migration/socket.c
+＞
+＞
+＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞
+＞
+＞       }
+＞
+＞
+＞
+＞
+＞
+＞       trace_migration_socket_incoming_accepted()
+＞
+＞
+＞
+＞
+＞
+＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+＞
+＞
+＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞
+＞
+＞       migration_channel_process_incoming(migrate_get_current(),
+＞
+＞
+＞                                          QIO_CHANNEL(sioc))
+＞
+＞
+＞       object_unref(OBJECT(sioc))
+＞
+＞
+＞
+＞
+＞ Is this patch ok?
+＞
+
+Yes, i think this works, but a better way maybe to call 
+qio_channel_set_feature()
+in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
+socket accept fd,
+Or fix it by this:
+
+diff --git a/io/channel-socket.c b/io/channel-socket.c
+index f546c68..ce6894c 100644
+--- a/io/channel-socket.c
++++ b/io/channel-socket.c
+@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
+                            Error **errp)
+  {
+      QIOChannelSocket *cioc
+-
+-    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET))
+-    cioc-＞fd = -1
++
++    cioc = qio_channel_socket_new()
+      cioc-＞remoteAddrLen = sizeof(ioc-＞remoteAddr)
+      cioc-＞localAddrLen = sizeof(ioc-＞localAddr)
+
+
+Thanks,
+Hailiang
+
+＞ I have test it . The test could not hang any more.
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞
+＞
+＞
+＞ 发件人： address@hidden
+＞ 收件人： address@hidden address@hidden
+＞ 抄送人： address@hidden address@hidden address@hidden
+＞ 日 期 ：2017年03月22日 09:11
+＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
+＞
+＞
+＞
+＞
+＞
+＞ On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+＞ ＞ * Hailiang Zhang (address@hidden) wrote:
+＞ ＞＞ Hi,
+＞ ＞＞
+＞ ＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+＞ ＞＞
+＞ ＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+＞ ＞＞ case COLO thread/incoming thread is stuck in read/write() while do 
+failover,
+＞ ＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
+＞ ＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
+＞ ＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+＞ ＞＞
+＞ ＞＞ Cc: Dr. David Alan Gilbert address@hidden
+＞ ＞＞
+＞ ＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
+＞ ＞＞ if we tried to cancel migration.
+＞ ＞＞
+＞ ＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
+Error **errp)
+＞ ＞＞ {
+＞ ＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
+＞ ＞＞      migration_channel_connect(s, ioc, NULL)
+＞ ＞＞      ... ...
+＞ ＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+＞ ＞＞ and the
+＞ ＞＞ migrate_fd_cancel()
+＞ ＞＞ {
+＞ ＞＞   ... ...
+＞ ＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
+＞ ＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
+＞ ＞＞      }
+＞ ＞＞ }
+＞ ＞
+＞ ＞ (cc'd in Daniel Berrange).
+＞ ＞ I see that we call qio_channel_set_feature(ioc, 
+QIO_CHANNEL_FEATURE_SHUTDOWN) at the
+＞ ＞ top of qio_channel_socket_new  so I think that's safe isn't it?
+＞ ＞
+＞
+＞ Hmm, you are right, this problem is only exist for the migration incoming fd, 
+thanks.
+＞
+＞ ＞ Dave
+＞ ＞
+＞ ＞＞ Thanks,
+＞ ＞＞ Hailiang
+＞ ＞＞
+＞ ＞＞ On 2017/3/21 16:10, address@hidden wrote:
+＞ ＞＞＞ Thank you。
+＞ ＞＞＞
+＞ ＞＞＞ I have test aready。
+＞ ＞＞＞
+＞ ＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same 
+place。
+＞ ＞＞＞
+＞ ＞＞＞ Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node 
+qemu will not produce the problem,but Primary Node panic can。
+＞ ＞＞＞
+＞ ＞＞＞ I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ when failover,channel_shutdown could not shut down the channel.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ I test a patch:
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ index 13966f1..d65a0ea 100644
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ --- a/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ +++ b/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        }
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        trace_migration_socket_incoming_accepted()
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), 
+"migration-socket-incoming")
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        migration_channel_process_incoming(migrate_get_current(),
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞                                           QIO_CHANNEL(sioc))
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        object_unref(OBJECT(sioc))
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ My test will not hang any more.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ 原始邮件
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ 发件人： address@hidden
+＞ ＞＞＞ 收件人：王广10165992 address@hidden
+＞ ＞＞＞ 抄送人： address@hidden address@hidden
+＞ ＞＞＞ 日 期 ：2017年03月21日 15:58
+＞ ＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ Hi,Wang.
+＞ ＞＞＞
+＞ ＞＞＞ You can test this branch:
+＞ ＞＞＞
+＞ ＞＞＞
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+＞ ＞＞＞
+＞ ＞＞＞ and please follow wiki ensure your own configuration correctly.
+＞ ＞＞＞
+＞ ＞＞＞
+http://wiki.qemu-project.org/Features/COLO
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ Thanks
+＞ ＞＞＞
+＞ ＞＞＞ Zhang Chen
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ hi.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ I test the git qemu master have the same problem.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ ＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ ＞＞＞ ＞ (address@hidden, address@hidden "",
+＞ ＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ ＞＞＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:295
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ ＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:568
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:648
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ ＞＞＞ ＞ address@hidden) at migration/colo.c:244
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ ＞＞＞ ＞ out＞, address@hidden,
+＞ ＞＞＞ ＞ address@hidden)
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞     at migration/colo.c:264
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ ＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞name
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $3 = 0
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ ＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ ＞＞＞ ＞ gmain.c:3054
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ ＞＞＞ ＞ address@hidden) at gmain.c:3630
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ ＞＞＞ ＞ util/main-loop.c:258
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
+＞ ＞＞＞ ＞ util/main-loop.c:506
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ ＞＞＞ ＞ out＞) at vl.c:4709
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞features
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $1 = 6
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞name
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ May be socket_accept_incoming_migration should
+＞ ＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ thank you.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ 原始邮件
+＞ ＞＞＞ ＞ address@hidden
+＞ ＞＞＞ ＞ address@hidden
+＞ ＞＞＞ ＞ address@hidden@huawei.com＞
+＞ ＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
+＞ ＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞＞＞ ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞＞＞ ＞ ＞ Do the colo have any plan for development?
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ In our internal version can run it successfully,
+＞ ＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
+＞ ＞＞＞ ＞ Next time if you have some question about COLO,
+＞ ＞＞＞ ＞ please cc me and zhanghailiang address@hidden
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ Thanks
+＞ ＞＞＞ ＞ Zhang Chen
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
+＞ ＞＞＞ ＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized 
+out＞,
+＞ ＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, 
+errp=0x0) at
+＞ ＞＞＞ ＞ ＞ io/channel-socket.c:497
+＞ ＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden "", address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:257
+＞ ＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:523
+＞ ＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:603
+＞ ＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message 
+(errp=0x7f3d62bfaa48,
+＞ ＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞＞＞ ＞ ＞ migration/colo.c:546
+＞ ＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞＞＞ ＞ ＞ migration/colo.c:649
+＞ ＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ --
+＞ ＞＞＞ ＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ --
+＞ ＞＞＞ ＞ Thanks
+＞ ＞＞＞ ＞ Zhang Chen
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞
+＞ ＞＞
+＞ ＞ --
+＞ ＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
+＞ ＞
+＞ ＞ .
+＞ ＞
+＞
+
+On 2017/3/22 16:09, address@hidden wrote:
+hi:
+
+yes.it is better.
+
+And should we delete
+Yes, you are right.
+#ifdef WIN32
+
+     QIO_CHANNEL(cioc)-＞event = CreateEvent(NULL, FALSE, FALSE, NULL)
+
+#endif
+
+
+
+
+in qio_channel_socket_accept？
+
+qio_channel_socket_new already have it.
+
+
+
+
+
+
+
+
+
+
+
+
+原始邮件
+
+
+
+发件人： address@hidden
+收件人：王广10165992
+抄送人： address@hidden address@hidden address@hidden address@hidden
+日 期 ：2017年03月22日 15:03
+主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: 答复: Re: [BUG]COLO failover hang
+
+
+
+
+
+Hi,
+
+On 2017/3/22 9:42, address@hidden wrote:
+＞ diff --git a/migration/socket.c b/migration/socket.c
+＞
+＞
+＞ index 13966f1..d65a0ea 100644
+＞
+＞
+＞ --- a/migration/socket.c
+＞
+＞
+＞ +++ b/migration/socket.c
+＞
+＞
+＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞
+＞
+＞       }
+＞
+＞
+＞
+＞
+＞
+＞       trace_migration_socket_incoming_accepted()
+＞
+＞
+＞
+＞
+＞
+＞       qio_channel_set_name(QIO_CHANNEL(sioc), "migration-socket-incoming")
+＞
+＞
+＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞
+＞
+＞       migration_channel_process_incoming(migrate_get_current(),
+＞
+＞
+＞                                          QIO_CHANNEL(sioc))
+＞
+＞
+＞       object_unref(OBJECT(sioc))
+＞
+＞
+＞
+＞
+＞ Is this patch ok?
+＞
+
+Yes, i think this works, but a better way maybe to call 
+qio_channel_set_feature()
+in qio_channel_socket_accept(), we didn't set the SHUTDOWN feature for the 
+socket accept fd,
+Or fix it by this:
+
+diff --git a/io/channel-socket.c b/io/channel-socket.c
+index f546c68..ce6894c 100644
+--- a/io/channel-socket.c
++++ b/io/channel-socket.c
+@@ -330,9 +330,8 @@ qio_channel_socket_accept(QIOChannelSocket *ioc,
+                             Error **errp)
+   {
+       QIOChannelSocket *cioc
+-
+-    cioc = QIO_CHANNEL_SOCKET(object_new(TYPE_QIO_CHANNEL_SOCKET))
+-    cioc-＞fd = -1
++
++    cioc = qio_channel_socket_new()
+       cioc-＞remoteAddrLen = sizeof(ioc-＞remoteAddr)
+       cioc-＞localAddrLen = sizeof(ioc-＞localAddr)
+
+
+Thanks,
+Hailiang
+
+＞ I have test it . The test could not hang any more.
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞
+＞ 原始邮件
+＞
+＞
+＞
+＞ 发件人： address@hidden
+＞ 收件人： address@hidden address@hidden
+＞ 抄送人： address@hidden address@hidden address@hidden
+＞ 日 期 ：2017年03月22日 09:11
+＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  答复: Re: [BUG]COLO failover hang
+＞
+＞
+＞
+＞
+＞
+＞ On 2017/3/21 19:56, Dr. David Alan Gilbert wrote:
+＞ ＞ * Hailiang Zhang (address@hidden) wrote:
+＞ ＞＞ Hi,
+＞ ＞＞
+＞ ＞＞ Thanks for reporting this, and i confirmed it in my test, and it is a bug.
+＞ ＞＞
+＞ ＞＞ Though we tried to call qemu_file_shutdown() to shutdown the related fd, in
+＞ ＞＞ case COLO thread/incoming thread is stuck in read/write() while do 
+failover,
+＞ ＞＞ but it didn't take effect, because all the fd used by COLO (also migration)
+＞ ＞＞ has been wrapped by qio channel, and it will not call the shutdown API if
+＞ ＞＞ we didn't qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN).
+＞ ＞＞
+＞ ＞＞ Cc: Dr. David Alan Gilbert address@hidden
+＞ ＞＞
+＞ ＞＞ I doubted migration cancel has the same problem, it may be stuck in write()
+＞ ＞＞ if we tried to cancel migration.
+＞ ＞＞
+＞ ＞＞ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, 
+Error **errp)
+＞ ＞＞ {
+＞ ＞＞      qio_channel_set_name(QIO_CHANNEL(ioc), "migration-fd-outgoing")
+＞ ＞＞      migration_channel_connect(s, ioc, NULL)
+＞ ＞＞      ... ...
+＞ ＞＞ We didn't call qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN) above,
+＞ ＞＞ and the
+＞ ＞＞ migrate_fd_cancel()
+＞ ＞＞ {
+＞ ＞＞   ... ...
+＞ ＞＞      if (s-＞state == MIGRATION_STATUS_CANCELLING && f) {
+＞ ＞＞          qemu_file_shutdown(f)  --＞ This will not take effect. No ?
+＞ ＞＞      }
+＞ ＞＞ }
+＞ ＞
+＞ ＞ (cc'd in Daniel Berrange).
+＞ ＞ I see that we call qio_channel_set_feature(ioc, 
+QIO_CHANNEL_FEATURE_SHUTDOWN) at the
+＞ ＞ top of qio_channel_socket_new  so I think that's safe isn't it?
+＞ ＞
+＞
+＞ Hmm, you are right, this problem is only exist for the migration incoming fd, 
+thanks.
+＞
+＞ ＞ Dave
+＞ ＞
+＞ ＞＞ Thanks,
+＞ ＞＞ Hailiang
+＞ ＞＞
+＞ ＞＞ On 2017/3/21 16:10, address@hidden wrote:
+＞ ＞＞＞ Thank you。
+＞ ＞＞＞
+＞ ＞＞＞ I have test aready。
+＞ ＞＞＞
+＞ ＞＞＞ When the Primary Node panic,the Secondary Node qemu hang at the same 
+place。
+＞ ＞＞＞
+＞ ＞＞＞ Incorrding
+http://wiki.qemu-project.org/Features/COLO
+，kill Primary Node 
+qemu will not produce the problem,but Primary Node panic can。
+＞ ＞＞＞
+＞ ＞＞＞ I think due to the feature of channel does not support 
+QIO_CHANNEL_FEATURE_SHUTDOWN.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ when failover,channel_shutdown could not shut down the channel.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ so the colo_process_incoming_thread will hang at recvmsg.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ I test a patch:
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ diff --git a/migration/socket.c b/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ index 13966f1..d65a0ea 100644
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ --- a/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ +++ b/migration/socket.c
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ @@ -147,8 +147,9 @@ static gboolean 
+socket_accept_incoming_migration(QIOChannel *ioc,
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        }
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        trace_migration_socket_incoming_accepted()
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        qio_channel_set_name(QIO_CHANNEL(sioc), 
+"migration-socket-incoming")
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ +    qio_channel_set_feature(QIO_CHANNEL(sioc), 
+QIO_CHANNEL_FEATURE_SHUTDOWN)
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        migration_channel_process_incoming(migrate_get_current(),
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞                                           QIO_CHANNEL(sioc))
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞        object_unref(OBJECT(sioc))
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ My test will not hang any more.
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ 原始邮件
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ 发件人： address@hidden
+＞ ＞＞＞ 收件人：王广10165992 address@hidden
+＞ ＞＞＞ 抄送人： address@hidden address@hidden
+＞ ＞＞＞ 日 期 ：2017年03月21日 15:58
+＞ ＞＞＞ 主 题 ：Re: [Qemu-devel]  答复: Re:  [BUG]COLO failover hang
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ Hi,Wang.
+＞ ＞＞＞
+＞ ＞＞＞ You can test this branch:
+＞ ＞＞＞
+＞ ＞＞＞
+https://github.com/coloft/qemu/tree/colo-v5.1-developing-COLO-frame-v21-with-shared-disk
+＞ ＞＞＞
+＞ ＞＞＞ and please follow wiki ensure your own configuration correctly.
+＞ ＞＞＞
+＞ ＞＞＞
+http://wiki.qemu-project.org/Features/COLO
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ Thanks
+＞ ＞＞＞
+＞ ＞＞＞ Zhang Chen
+＞ ＞＞＞
+＞ ＞＞＞
+＞ ＞＞＞ On 03/21/2017 03:27 PM, address@hidden wrote:
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ hi.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ I test the git qemu master have the same problem.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #0  qio_channel_socket_readv (ioc=0x7f65911b4e50, iov=0x7f64ef3fd880,
+＞ ＞＞＞ ＞ niov=1, fds=0x0, nfds=0x0, errp=0x0) at io/channel-socket.c:461
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #1  0x00007f658e4aa0c2 in qio_channel_read
+＞ ＞＞＞ ＞ (address@hidden, address@hidden "",
+＞ ＞＞＞ ＞ address@hidden, address@hidden) at io/channel.c:114
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #2  0x00007f658e3ea990 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞＞＞ ＞ buf=0x7f65907cb838 "", pos=＜optimized out＞, size=32768) at
+＞ ＞＞＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #3  0x00007f658e3e97fc in qemu_fill_buffer (f=0x7f65907cb800) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:295
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #4  0x00007f658e3ea2e1 in qemu_peek_byte (address@hidden,
+＞ ＞＞＞ ＞ address@hidden) at migration/qemu-file.c:555
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #5  0x00007f658e3ea34b in qemu_get_byte (address@hidden) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:568
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #6  0x00007f658e3ea552 in qemu_get_be32 (address@hidden) at
+＞ ＞＞＞ ＞ migration/qemu-file.c:648
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #7  0x00007f658e3e66e5 in colo_receive_message (f=0x7f65907cb800,
+＞ ＞＞＞ ＞ address@hidden) at migration/colo.c:244
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #8  0x00007f658e3e681e in colo_receive_check_message (f=＜optimized
+＞ ＞＞＞ ＞ out＞, address@hidden,
+＞ ＞＞＞ ＞ address@hidden)
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞     at migration/colo.c:264
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #9  0x00007f658e3e740e in colo_process_incoming_thread
+＞ ＞＞＞ ＞ (opaque=0x7f658eb30360 ＜mis_current.31286＞) at migration/colo.c:577
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #10 0x00007f658be09df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #11 0x00007f65881983ed in clone () from /lib64/libc.so.6
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞name
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $2 = 0x7f658ff7d5c0 "migration-socket-incoming"
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞features        Do not support QIO_CHANNEL_FEATURE_SHUTDOWN
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $3 = 0
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #0  socket_accept_incoming_migration (ioc=0x7fdcceeafa90,
+＞ ＞＞＞ ＞ condition=G_IO_IN, opaque=0x7fdcceeafa90) at migration/socket.c:137
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #1  0x00007fdcc6966350 in g_main_dispatch (context=＜optimized out＞) at
+＞ ＞＞＞ ＞ gmain.c:3054
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #2  g_main_context_dispatch (context=＜optimized out＞,
+＞ ＞＞＞ ＞ address@hidden) at gmain.c:3630
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #3  0x00007fdccb8a6dcc in glib_pollfds_poll () at util/main-loop.c:213
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #4  os_host_main_loop_wait (timeout=＜optimized out＞) at
+＞ ＞＞＞ ＞ util/main-loop.c:258
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #5  main_loop_wait (address@hidden) at
+＞ ＞＞＞ ＞ util/main-loop.c:506
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #6  0x00007fdccb526187 in main_loop () at vl.c:1898
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ #7  main (argc=＜optimized out＞, argv=＜optimized out＞, envp=＜optimized
+＞ ＞＞＞ ＞ out＞) at vl.c:4709
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞features
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $1 = 6
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ (gdb) p ioc-＞name
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ $2 = 0x7fdcce1b1ab0 "migration-socket-listener"
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ May be socket_accept_incoming_migration should
+＞ ＞＞＞ ＞ call qio_channel_set_feature(ioc, QIO_CHANNEL_FEATURE_SHUTDOWN)??
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ thank you.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ 原始邮件
+＞ ＞＞＞ ＞ address@hidden
+＞ ＞＞＞ ＞ address@hidden
+＞ ＞＞＞ ＞ address@hidden@huawei.com＞
+＞ ＞＞＞ ＞ *日 期 ：*2017年03月16日 14:46
+＞ ＞＞＞ ＞ *主 题 ：**Re: [Qemu-devel] COLO failover hang*
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ On 03/15/2017 05:06 PM, wangguang wrote:
+＞ ＞＞＞ ＞ ＞   am testing QEMU COLO feature described here [QEMU
+＞ ＞＞＞ ＞ ＞ Wiki](
+http://wiki.qemu-project.org/Features/COLO
+).
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ When the Primary Node panic,the Secondary Node qemu hang.
+＞ ＞＞＞ ＞ ＞ hang at recvmsg in qio_channel_socket_readv.
+＞ ＞＞＞ ＞ ＞ And  I run  { 'execute': 'nbd-server-stop' } and { "execute":
+＞ ＞＞＞ ＞ ＞ "x-colo-lost-heartbeat" } in Secondary VM's
+＞ ＞＞＞ ＞ ＞ monitor,the  Secondary Node qemu still hang at recvmsg .
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ I found that the colo in qemu is not complete yet.
+＞ ＞＞＞ ＞ ＞ Do the colo have any plan for development?
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ Yes, We are developing. You can see some of patch we pushing.
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ ＞ Has anyone ever run it successfully? Any help is appreciated!
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ In our internal version can run it successfully,
+＞ ＞＞＞ ＞ The failover detail you can ask Zhanghailiang for help.
+＞ ＞＞＞ ＞ Next time if you have some question about COLO,
+＞ ＞＞＞ ＞ please cc me and zhanghailiang address@hidden
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ Thanks
+＞ ＞＞＞ ＞ Zhang Chen
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ centos7.2+qemu2.7.50
+＞ ＞＞＞ ＞ ＞ (gdb) bt
+＞ ＞＞＞ ＞ ＞ #0  0x00007f3e00cc86ad in recvmsg () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞ ＞ #1  0x00007f3e0332b738 in qio_channel_socket_readv (ioc=＜optimized 
+out＞,
+＞ ＞＞＞ ＞ ＞ iov=＜optimized out＞, niov=＜optimized out＞, fds=0x0, nfds=0x0, 
+errp=0x0) at
+＞ ＞＞＞ ＞ ＞ io/channel-socket.c:497
+＞ ＞＞＞ ＞ ＞ #2  0x00007f3e03329472 in qio_channel_read (address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden "", address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden) at io/channel.c:97
+＞ ＞＞＞ ＞ ＞ #3  0x00007f3e032750e0 in channel_get_buffer (opaque=＜optimized out＞,
+＞ ＞＞＞ ＞ ＞ buf=0x7f3e05910f38 "", pos=＜optimized out＞, size=32768) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file-channel.c:78
+＞ ＞＞＞ ＞ ＞ #4  0x00007f3e0327412c in qemu_fill_buffer (f=0x7f3e05910f00) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:257
+＞ ＞＞＞ ＞ ＞ #5  0x00007f3e03274a41 in qemu_peek_byte (address@hidden,
+＞ ＞＞＞ ＞ ＞ address@hidden) at migration/qemu-file.c:510
+＞ ＞＞＞ ＞ ＞ #6  0x00007f3e03274aab in qemu_get_byte (address@hidden) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:523
+＞ ＞＞＞ ＞ ＞ #7  0x00007f3e03274cb2 in qemu_get_be32 (address@hidden) at
+＞ ＞＞＞ ＞ ＞ migration/qemu-file.c:603
+＞ ＞＞＞ ＞ ＞ #8  0x00007f3e03271735 in colo_receive_message (f=0x7f3e05910f00,
+＞ ＞＞＞ ＞ ＞ address@hidden) at migration/colo.c:215
+＞ ＞＞＞ ＞ ＞ #9  0x00007f3e0327250d in colo_wait_handle_message 
+(errp=0x7f3d62bfaa48,
+＞ ＞＞＞ ＞ ＞ checkpoint_request=＜synthetic pointer＞, f=＜optimized out＞) at
+＞ ＞＞＞ ＞ ＞ migration/colo.c:546
+＞ ＞＞＞ ＞ ＞ #10 colo_process_incoming_thread (opaque=0x7f3e067245e0) at
+＞ ＞＞＞ ＞ ＞ migration/colo.c:649
+＞ ＞＞＞ ＞ ＞ #11 0x00007f3e00cc1df3 in start_thread () from /lib64/libpthread.so.0
+＞ ＞＞＞ ＞ ＞ #12 0x00007f3dfc9c03ed in clone () from /lib64/libc..so.6
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞ --
+＞ ＞＞＞ ＞ ＞ View this message in context:
+http://qemu.11.n7.nabble.com/COLO-failover-hang-tp473250.html
+＞ ＞＞＞ ＞ ＞ Sent from the Developer mailing list archive at Nabble.com.
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞ --
+＞ ＞＞＞ ＞ Thanks
+＞ ＞＞＞ ＞ Zhang Chen
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞ ＞
+＞ ＞＞＞
+＞ ＞＞
+＞ ＞ --
+＞ ＞ Dr. David Alan Gilbert / address@hidden / Manchester, UK
+＞ ＞
+＞ ＞ .
+＞ ＞
+＞
+
diff --git a/results/classifier/zero-shot/010/review/70416488 b/results/classifier/zero-shot/010/review/70416488
new file mode 100644
index 00000000..450d98b0
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/70416488
@@ -0,0 +1,1203 @@
+other: 0.980
+semantic: 0.975
+graphic: 0.972
+debug: 0.967
+device: 0.945
+performance: 0.939
+permissions: 0.922
+PID: 0.916
+vnc: 0.910
+KVM: 0.908
+boot: 0.897
+network: 0.881
+socket: 0.870
+files: 0.858
+debug: 0.857
+boot: 0.817
+KVM: 0.289
+device: 0.047
+PID: 0.037
+files: 0.027
+semantic: 0.016
+other: 0.016
+socket: 0.015
+performance: 0.009
+vnc: 0.007
+network: 0.003
+permissions: 0.002
+graphic: 0.002
+
+[Bug Report] smmuv3 event 0x10 report when running virtio-blk-pci
+
+Hi All,
+
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+during kernel booting up.
+
+qemu command which I use is as below:
+
+qemu-system-aarch64 -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+-kernel Image -initrd minifs.cpio.gz \
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+-device 
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2 
+\
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+-device 
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+
+smmuv3 event 0x10 log:
+[...]
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks (1.07 
+GB/1.00 GiB)
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.968381] clk: Disabling unused clocks
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.968990] PM: genpd: Disabling unused power domains
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.969814] ALSA device list:
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.970471]   No soundcards found.
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.975005] Freeing unused kernel memory: 10112K
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.975442] Run init as init process
+
+Another information is that if "maxcpus=3" is removed from the kernel command 
+line,
+it will be OK.
+
+I am not sure if there is a bug about vsmmu. It will be very appreciated if 
+anyone
+know this issue or can take a look at it.
+
+Thanks,
+Zhou
+
+On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+Hi All,
+>
+>
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+during kernel booting up.
+Does it still do this if you either:
+ (1) use the v9.1.0 release (commit fd1952d814da)
+ (2) use "-machine virt-9.1" instead of "-machine virt"
+
+?
+
+My suspicion is that this will have started happening now that
+we expose an SMMU with two-stage translation support to the guest
+in the "virt" machine type (which we do not if you either
+use virt-9.1 or in the v9.1.0 release).
+
+I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+the two-stage support).
+
+>
+qemu command which I use is as below:
+>
+>
+qemu-system-aarch64 -machine
+>
+virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+-kernel Image -initrd minifs.cpio.gz \
+>
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+-device
+>
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+\
+>
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+-device
+>
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+smmuv3 event 0x10 log:
+>
+[...]
+>
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+(1.07 GB/1.00 GiB)
+>
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.968381] clk: Disabling unused clocks
+>
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.968990] PM: genpd: Disabling unused power domains
+>
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.969814] ALSA device list:
+>
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.970471]   No soundcards found.
+>
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975005] Freeing unused kernel memory: 10112K
+>
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975442] Run init as init process
+>
+>
+Another information is that if "maxcpus=3" is removed from the kernel command
+>
+line,
+>
+it will be OK.
+>
+>
+I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+anyone
+>
+know this issue or can take a look at it.
+thanks
+-- PMM
+
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> Hi All,
+>
+>
+>
+> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+> during kernel booting up.
+>
+>
+Does it still do this if you either:
+>
+(1) use the v9.1.0 release (commit fd1952d814da)
+>
+(2) use "-machine virt-9.1" instead of "-machine virt"
+I tested above two cases, the problem is still there.
+
+>
+>
+?
+>
+>
+My suspicion is that this will have started happening now that
+>
+we expose an SMMU with two-stage translation support to the guest
+>
+in the "virt" machine type (which we do not if you either
+>
+use virt-9.1 or in the v9.1.0 release).
+>
+>
+I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+the two-stage support).
+>
+>
+> qemu command which I use is as below:
+>
+>
+>
+> qemu-system-aarch64 -machine
+>
+> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+> -kernel Image -initrd minifs.cpio.gz \
+>
+> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+> -device
+>
+> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>  \
+>
+> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+> -device
+>
+> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+>
+> smmuv3 event 0x10 log:
+>
+> [...]
+>
+> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+> (1.07 GB/1.00 GiB)
+>
+> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.968381] clk: Disabling unused clocks
+>
+> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.968990] PM: genpd: Disabling unused power domains
+>
+> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.969814] ALSA device list:
+>
+> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.970471]   No soundcards found.
+>
+> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975005] Freeing unused kernel memory: 10112K
+>
+> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975442] Run init as init process
+>
+>
+>
+> Another information is that if "maxcpus=3" is removed from the kernel
+>
+> command line,
+>
+> it will be OK.
+>
+>
+>
+> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+> anyone
+>
+> know this issue or can take a look at it.
+>
+>
+thanks
+>
+-- PMM
+>
+.
+
+Hi Zhou,
+On 9/10/24 03:24, Zhou Wang via wrote:
+>
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+>> during kernel booting up.
+>
+> Does it still do this if you either:
+>
+>  (1) use the v9.1.0 release (commit fd1952d814da)
+>
+>  (2) use "-machine virt-9.1" instead of "-machine virt"
+>
+I tested above two cases, the problem is still there.
+Thank you for reporting. I am able to reproduce and effectively the
+maxcpus kernel option is triggering the issue. It works without. I will
+come back to you asap.
+
+Eric
+>
+>
+> ?
+>
+>
+>
+> My suspicion is that this will have started happening now that
+>
+> we expose an SMMU with two-stage translation support to the guest
+>
+> in the "virt" machine type (which we do not if you either
+>
+> use virt-9.1 or in the v9.1.0 release).
+>
+>
+>
+> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+> the two-stage support).
+>
+>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+>> anyone
+>
+>> know this issue or can take a look at it.
+>
+> thanks
+>
+> -- PMM
+>
+> .
+
+Hi,
+
+On 9/10/24 03:24, Zhou Wang via wrote:
+>
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+>> during kernel booting up.
+>
+> Does it still do this if you either:
+>
+>  (1) use the v9.1.0 release (commit fd1952d814da)
+>
+>  (2) use "-machine virt-9.1" instead of "-machine virt"
+>
+I tested above two cases, the problem is still there.
+I have not much progressed yet but I see it comes with
+qemu traces.
+
+smmuv3-iommu-memory-region-0-0 translation failed for iova=0x0
+(SMMU_EVT_F_TRANSLATION)
+../..
+qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
+ensure -accel kvm is set.
+qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
+userspace (slower).
+
+the PCIe Host bridge seems to cause that translation failure at iova=0
+
+Also virtio-iommu has the same issue:
+qemu-system-aarch64: virtio_iommu_translate no mapping for 0x0 for sid=1024
+qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
+ensure -accel kvm is set.
+qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
+userspace (slower).
+
+Only happens with maxcpus=3. Note the virtio-blk-pci is not protected by
+the vIOMMU in your case.
+
+Thanks
+
+Eric
+
+>
+>
+> ?
+>
+>
+>
+> My suspicion is that this will have started happening now that
+>
+> we expose an SMMU with two-stage translation support to the guest
+>
+> in the "virt" machine type (which we do not if you either
+>
+> use virt-9.1 or in the v9.1.0 release).
+>
+>
+>
+> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+> the two-stage support).
+>
+>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+>> anyone
+>
+>> know this issue or can take a look at it.
+>
+> thanks
+>
+> -- PMM
+>
+> .
+
+Hi Zhou,
+
+On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+Hi All,
+>
+>
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+during kernel booting up.
+>
+>
+qemu command which I use is as below:
+>
+>
+qemu-system-aarch64 -machine
+>
+virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+-kernel Image -initrd minifs.cpio.gz \
+>
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+-device
+>
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+\
+>
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+-device
+>
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+smmuv3 event 0x10 log:
+>
+[...]
+>
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+(1.07 GB/1.00 GiB)
+>
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.968381] clk: Disabling unused clocks
+>
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.968990] PM: genpd: Disabling unused power domains
+>
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.969814] ALSA device list:
+>
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.970471]   No soundcards found.
+>
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975005] Freeing unused kernel memory: 10112K
+>
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975442] Run init as init process
+>
+>
+Another information is that if "maxcpus=3" is removed from the kernel command
+>
+line,
+>
+it will be OK.
+>
+That's interesting, not sure how that would be related.
+
+>
+I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+anyone
+>
+know this issue or can take a look at it.
+>
+Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+
+Also if possible, can you please provide which Linux kernel version
+you are using, I will see if I can repro.
+
+Thanks,
+Mostafa
+
+>
+Thanks,
+>
+Zhou
+>
+>
+>
+
+On 2024/9/9 22:47, Mostafa Saleh wrote:
+>
+Hi Zhou,
+>
+>
+On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> Hi All,
+>
+>
+>
+> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+> during kernel booting up.
+>
+>
+>
+> qemu command which I use is as below:
+>
+>
+>
+> qemu-system-aarch64 -machine
+>
+> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+> -kernel Image -initrd minifs.cpio.gz \
+>
+> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+> -device
+>
+> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>  \
+>
+> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+> -device
+>
+> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+>
+> smmuv3 event 0x10 log:
+>
+> [...]
+>
+> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+> (1.07 GB/1.00 GiB)
+>
+> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.968381] clk: Disabling unused clocks
+>
+> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.968990] PM: genpd: Disabling unused power domains
+>
+> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.969814] ALSA device list:
+>
+> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.970471]   No soundcards found.
+>
+> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975005] Freeing unused kernel memory: 10112K
+>
+> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975442] Run init as init process
+>
+>
+>
+> Another information is that if "maxcpus=3" is removed from the kernel
+>
+> command line,
+>
+> it will be OK.
+>
+>
+>
+>
+That's interesting, not sure how that would be related.
+>
+>
+> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+> anyone
+>
+> know this issue or can take a look at it.
+>
+>
+>
+>
+Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+Sure. Please see the attached log(using above qemu commit and command).
+
+>
+>
+Also if possible, can you please provide which Linux kernel version
+>
+you are using, I will see if I can repro.
+I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
+
+Thanks,
+Zhou
+
+>
+>
+Thanks,
+>
+Mostafa
+>
+>
+> Thanks,
+>
+> Zhou
+>
+>
+>
+>
+>
+>
+>
+>
+.
+qemu_boot_log.txt
+Description:
+Text document
+
+On Tue, Sep 10, 2024 at 2:51 AM Zhou Wang <wangzhou1@hisilicon.com> wrote:
+>
+>
+On 2024/9/9 22:47, Mostafa Saleh wrote:
+>
+> Hi Zhou,
+>
+>
+>
+> On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>>
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event
+>
+>> 0x10
+>
+>> during kernel booting up.
+>
+>>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1
+>
+>> \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>
+>
+> That's interesting, not sure how that would be related.
+>
+>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated
+>
+>> if anyone
+>
+>> know this issue or can take a look at it.
+>
+>>
+>
+>
+>
+> Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+>
+>
+Sure. Please see the attached log(using above qemu commit and command).
+>
+Thanks a lot, it seems the SMMUv3 indeed receives a translation
+request with addr 0x0 which causes this event.
+I don't see any kind of modification (alignment) of the address in this path.
+So my hunch it's not related to the SMMUv3 and the initiator is
+issuing bogus addresses.
+
+>
+>
+>
+> Also if possible, can you please provide which Linux kernel version
+>
+> you are using, I will see if I can repro.
+>
+>
+I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
+>
+I see, I can't repro in my setup which has no "--enable-kvm" and with
+"-cpu max" instead of host.
+I will try other options and see if I can repro.
+
+Thanks,
+Mostafa
+>
+Thanks,
+>
+Zhou
+>
+>
+>
+>
+> Thanks,
+>
+> Mostafa
+>
+>
+>
+>> Thanks,
+>
+>> Zhou
+>
+>>
+>
+>>
+>
+>>
+>
+>
+>
+> .
+
diff --git a/results/classifier/zero-shot/010/review/70868267 b/results/classifier/zero-shot/010/review/70868267
new file mode 100644
index 00000000..f2afd7c7
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/70868267
@@ -0,0 +1,64 @@
+graphic: 0.706
+device: 0.643
+semantic: 0.635
+files: 0.552
+performance: 0.525
+debug: 0.521
+PID: 0.420
+socket: 0.418
+network: 0.411
+permissions: 0.265
+other: 0.236
+vnc: 0.227
+boot: 0.197
+KVM: 0.167
+files: 0.026
+debug: 0.020
+network: 0.019
+PID: 0.018
+other: 0.003
+semantic: 0.003
+device: 0.002
+socket: 0.002
+performance: 0.001
+graphic: 0.001
+vnc: 0.001
+boot: 0.001
+permissions: 0.000
+KVM: 0.000
+
+[Qemu-devel] [BUG] Failed to compile using gcc7.1
+
+Hi all,
+
+After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
+
+The error is:
+
+------
+  CC      block/blkdebug.o
+block/blkdebug.c: In function 'blkdebug_refresh_filename':
+block/blkdebug.c:693:31: error: '%s' directive output may be truncated
+writing up to 4095 bytes into a region of size 4086
+[-Werror=format-truncation=]
+"blkdebug:%s:%s", s->config_file ?: "",
+                               ^~
+In file included from /usr/include/stdio.h:939:0,
+                 from /home/adam/qemu/include/qemu/osdep.h:68,
+                 from block/blkdebug.c:25:
+/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk'
+output 11 or more bytes (assuming 4106) into a destination of size 4096
+return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
+          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+        __bos (__s), __fmt, __va_arg_pack ());
+        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cc1: all warnings being treated as errors
+make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
+------
+
+It seems that gcc 7 is introducing more restrict check for printf.
+If using clang, although there are some extra warning, it can at least
+pass the compile.
+Thanks,
+Qu
+
diff --git a/results/classifier/zero-shot/010/review/71456293 b/results/classifier/zero-shot/010/review/71456293
new file mode 100644
index 00000000..d86e28a4
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/71456293
@@ -0,0 +1,1510 @@
+KVM: 0.691
+vnc: 0.625
+debug: 0.620
+PID: 0.614
+permissions: 0.613
+graphic: 0.603
+device: 0.601
+semantic: 0.600
+other: 0.598
+boot: 0.598
+socket: 0.596
+performance: 0.594
+files: 0.592
+network: 0.491
+debug: 0.853
+files: 0.173
+PID: 0.059
+KVM: 0.025
+other: 0.025
+performance: 0.019
+device: 0.010
+semantic: 0.003
+network: 0.002
+vnc: 0.002
+boot: 0.002
+socket: 0.002
+graphic: 0.001
+permissions: 0.001
+
+[Qemu-devel][bug] qemu crash when migrate vm and vm's disks
+
+When migrate vm and vm’s disks target host qemu crash due to an invalid free.
+#0  object_unref (obj=0x1000) at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
+#1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
+at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
+#2  flatview_destroy (view=0x560439653880) at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
+#3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
+at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
+#4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
+#5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
+test base qemu-2.12.0
+，
+but use lastest qemu(v6.0.0-rc2) also reproduce.
+As follow patch can resolve this problem:
+https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
+Steps to reproduce:
+(1) Create VM (virsh define)
+(2) Add 64 virtio scsi disks
+(3) migrate vm and vm’disks
+-------------------------------------------------------------------------------------------------------------------------------------
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+邮件！
+This e-mail and its attachments contain confidential information from New H3C, which is
+intended only for the person or entity whose address is listed above. Any use of the
+information contained herein in any way (including, but not limited to, total or partial
+disclosure, reproduction, or dissemination) by persons other than the intended
+recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender
+by phone or email immediately and delete it!
+
+* Yuchen (yu.chen@h3c.com) wrote:
+>
+When migrate vm and vm’s disks target host qemu crash due to an invalid free.
+>
+>
+#0  object_unref (obj=0x1000) at
+>
+/qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
+>
+#1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
+>
+at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
+>
+#2  flatview_destroy (view=0x560439653880) at
+>
+/qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
+>
+#3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
+>
+at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
+>
+#4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
+>
+#5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
+>
+>
+test base qemu-2.12.0，but use lastest qemu(v6.0.0-rc2) also reproduce.
+Interesting.
+
+>
+As follow patch can resolve this problem:
+>
+https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
+That's a pci/rcu change; ccing Paolo and Micahel.
+
+>
+Steps to reproduce:
+>
+(1) Create VM (virsh define)
+>
+(2) Add 64 virtio scsi disks
+Is that hot adding the disks later, or are they included in the VM at
+creation?
+Can you provide a libvirt XML example?
+
+>
+(3) migrate vm and vm’disks
+What do you mean by 'and vm disks' - are you doing a block migration?
+
+Dave
+
+>
+-------------------------------------------------------------------------------------------------------------------------------------
+>
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+>
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+>
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+>
+邮件！
+>
+This e-mail and its attachments contain confidential information from New
+>
+H3C, which is
+>
+intended only for the person or entity whose address is listed above. Any use
+>
+of the
+>
+information contained herein in any way (including, but not limited to, total
+>
+or partial
+>
+disclosure, reproduction, or dissemination) by persons other than the intended
+>
+recipient(s) is prohibited. If you receive this e-mail in error, please
+>
+notify the sender
+>
+by phone or email immediately and delete it!
+-- 
+Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
+
+>
+-----邮件原件-----
+>
+发件人: Dr. David Alan Gilbert [
+mailto:dgilbert@redhat.com
+]
+>
+发送时间: 2021年4月8日 19:27
+>
+收件人: yuchen (Cloud) <yu.chen@h3c.com>; pbonzini@redhat.com;
+>
+mst@redhat.com
+>
+抄送: qemu-devel@nongnu.org
+>
+主题: Re: [Qemu-devel][bug] qemu crash when migrate vm and vm's disks
+>
+>
+* Yuchen (yu.chen@h3c.com) wrote:
+>
+> When migrate vm and vm’s disks target host qemu crash due to an invalid
+>
+free.
+>
+>
+>
+> #0  object_unref (obj=0x1000) at
+>
+> /qemu-2.12/rpmbuild/BUILD/qemu-2.12/qom/object.c:920
+>
+> #1  0x0000560434d79e79 in memory_region_unref (mr=<optimized out>)
+>
+>     at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:1730
+>
+> #2  flatview_destroy (view=0x560439653880) at
+>
+> /qemu-2.12/rpmbuild/BUILD/qemu-2.12/memory.c:292
+>
+> #3  0x000056043514dfbe in call_rcu_thread (opaque=<optimized out>)
+>
+>     at /qemu-2.12/rpmbuild/BUILD/qemu-2.12/util/rcu.c:284
+>
+> #4  0x00007fbc2b36fe25 in start_thread () from /lib64/libpthread.so.0
+>
+> #5  0x00007fbc2b099bad in clone () from /lib64/libc.so.6
+>
+>
+>
+> test base qemu-2.12.0，but use lastest qemu(v6.0.0-rc2) also reproduce.
+>
+>
+Interesting.
+>
+>
+> As follow patch can resolve this problem:
+>
+>
+https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02272.html
+>
+>
+That's a pci/rcu change; ccing Paolo and Micahel.
+>
+>
+> Steps to reproduce:
+>
+> (1) Create VM (virsh define)
+>
+> (2) Add 64 virtio scsi disks
+>
+>
+Is that hot adding the disks later, or are they included in the VM at
+>
+creation?
+>
+Can you provide a libvirt XML example?
+>
+Include disks in the VM at creation
+
+vm disks xml (only virtio scsi disks):
+  <devices>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native'/>
+      <source file='/vms/tempp/vm-os'/>
+      <target dev='vda' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data1'/>
+      <target dev='sda' bus='scsi'/>
+      <address type='drive' controller='2' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data2'/>
+      <target dev='sdb' bus='scsi'/>
+      <address type='drive' controller='3' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data3'/>
+      <target dev='sdc' bus='scsi'/>
+      <address type='drive' controller='4' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data4'/>
+      <target dev='sdd' bus='scsi'/>
+      <address type='drive' controller='5' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data5'/>
+      <target dev='sde' bus='scsi'/>
+      <address type='drive' controller='6' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data6'/>
+      <target dev='sdf' bus='scsi'/>
+      <address type='drive' controller='7' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data7'/>
+      <target dev='sdg' bus='scsi'/>
+      <address type='drive' controller='8' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data8'/>
+      <target dev='sdh' bus='scsi'/>
+      <address type='drive' controller='9' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data9'/>
+      <target dev='sdi' bus='scsi'/>
+      <address type='drive' controller='10' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data10'/>
+      <target dev='sdj' bus='scsi'/>
+      <address type='drive' controller='11' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data11'/>
+      <target dev='sdk' bus='scsi'/>
+      <address type='drive' controller='12' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data12'/>
+      <target dev='sdl' bus='scsi'/>
+      <address type='drive' controller='13' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data13'/>
+      <target dev='sdm' bus='scsi'/>
+      <address type='drive' controller='14' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data14'/>
+      <target dev='sdn' bus='scsi'/>
+      <address type='drive' controller='15' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data15'/>
+      <target dev='sdo' bus='scsi'/>
+      <address type='drive' controller='16' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data16'/>
+      <target dev='sdp' bus='scsi'/>
+      <address type='drive' controller='17' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data17'/>
+      <target dev='sdq' bus='scsi'/>
+      <address type='drive' controller='18' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data18'/>
+      <target dev='sdr' bus='scsi'/>
+      <address type='drive' controller='19' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data19'/>
+      <target dev='sds' bus='scsi'/>
+      <address type='drive' controller='20' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data20'/>
+      <target dev='sdt' bus='scsi'/>
+      <address type='drive' controller='21' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data21'/>
+      <target dev='sdu' bus='scsi'/>
+      <address type='drive' controller='22' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data22'/>
+      <target dev='sdv' bus='scsi'/>
+      <address type='drive' controller='23' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data23'/>
+      <target dev='sdw' bus='scsi'/>
+      <address type='drive' controller='24' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data24'/>
+      <target dev='sdx' bus='scsi'/>
+      <address type='drive' controller='25' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data25'/>
+      <target dev='sdy' bus='scsi'/>
+      <address type='drive' controller='26' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data26'/>
+      <target dev='sdz' bus='scsi'/>
+      <address type='drive' controller='27' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data27'/>
+      <target dev='sdaa' bus='scsi'/>
+      <address type='drive' controller='28' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data28'/>
+      <target dev='sdab' bus='scsi'/>
+      <address type='drive' controller='29' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data29'/>
+      <target dev='sdac' bus='scsi'/>
+      <address type='drive' controller='30' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data30'/>
+      <target dev='sdad' bus='scsi'/>
+      <address type='drive' controller='31' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data31'/>
+      <target dev='sdae' bus='scsi'/>
+      <address type='drive' controller='32' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data32'/>
+      <target dev='sdaf' bus='scsi'/>
+      <address type='drive' controller='33' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data33'/>
+      <target dev='sdag' bus='scsi'/>
+      <address type='drive' controller='34' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data34'/>
+      <target dev='sdah' bus='scsi'/>
+      <address type='drive' controller='35' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data35'/>
+      <target dev='sdai' bus='scsi'/>
+      <address type='drive' controller='36' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data36'/>
+      <target dev='sdaj' bus='scsi'/>
+      <address type='drive' controller='37' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data37'/>
+      <target dev='sdak' bus='scsi'/>
+      <address type='drive' controller='38' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data38'/>
+      <target dev='sdal' bus='scsi'/>
+      <address type='drive' controller='39' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data39'/>
+      <target dev='sdam' bus='scsi'/>
+      <address type='drive' controller='40' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data40'/>
+      <target dev='sdan' bus='scsi'/>
+      <address type='drive' controller='41' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data41'/>
+      <target dev='sdao' bus='scsi'/>
+      <address type='drive' controller='42' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data42'/>
+      <target dev='sdap' bus='scsi'/>
+      <address type='drive' controller='43' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data43'/>
+      <target dev='sdaq' bus='scsi'/>
+      <address type='drive' controller='44' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data44'/>
+      <target dev='sdar' bus='scsi'/>
+      <address type='drive' controller='45' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data45'/>
+      <target dev='sdas' bus='scsi'/>
+      <address type='drive' controller='46' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data46'/>
+      <target dev='sdat' bus='scsi'/>
+      <address type='drive' controller='47' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data47'/>
+      <target dev='sdau' bus='scsi'/>
+      <address type='drive' controller='48' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data48'/>
+      <target dev='sdav' bus='scsi'/>
+      <address type='drive' controller='49' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data49'/>
+      <target dev='sdaw' bus='scsi'/>
+      <address type='drive' controller='50' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data50'/>
+      <target dev='sdax' bus='scsi'/>
+      <address type='drive' controller='51' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data51'/>
+      <target dev='sday' bus='scsi'/>
+      <address type='drive' controller='52' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data52'/>
+      <target dev='sdaz' bus='scsi'/>
+      <address type='drive' controller='53' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data53'/>
+      <target dev='sdba' bus='scsi'/>
+      <address type='drive' controller='54' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data54'/>
+      <target dev='sdbb' bus='scsi'/>
+      <address type='drive' controller='55' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data55'/>
+      <target dev='sdbc' bus='scsi'/>
+      <address type='drive' controller='56' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data56'/>
+      <target dev='sdbd' bus='scsi'/>
+      <address type='drive' controller='57' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data57'/>
+      <target dev='sdbe' bus='scsi'/>
+      <address type='drive' controller='58' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data58'/>
+      <target dev='sdbf' bus='scsi'/>
+      <address type='drive' controller='59' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data59'/>
+      <target dev='sdbg' bus='scsi'/>
+      <address type='drive' controller='60' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data60'/>
+      <target dev='sdbh' bus='scsi'/>
+      <address type='drive' controller='61' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data61'/>
+      <target dev='sdbi' bus='scsi'/>
+      <address type='drive' controller='62' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data62'/>
+      <target dev='sdbj' bus='scsi'/>
+      <address type='drive' controller='63' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data63'/>
+      <target dev='sdbk' bus='scsi'/>
+      <address type='drive' controller='64' bus='0' target='0' unit='0'/>
+    </disk>
+    <controller type='scsi' index='0'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x02' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='1' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='2' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x01' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='3' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x03' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='4' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x04' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='5' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x05' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='6' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x06' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='7' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x07' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='8' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x08' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='9' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x09' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='10' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0a' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='11' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0b' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='12' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0c' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='13' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0d' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='14' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0e' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='15' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0f' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='16' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x10' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='17' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x11' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='18' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x12' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='19' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x13' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='20' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x14' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='21' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x15' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='22' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x16' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='23' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x17' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='24' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x18' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='25' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x19' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='26' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1a' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='27' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1b' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='28' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1c' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='29' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1d' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='30' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1e' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='31' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='32' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='33' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x03' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='34' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x04' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='35' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x05' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='36' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x06' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='37' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x07' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='38' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x08' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='39' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x09' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='40' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0a' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='41' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0b' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='42' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0c' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='43' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0d' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='44' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='45' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='46' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='47' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='48' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='49' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='50' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='51' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x10' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='52' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x11' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='53' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x12' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='54' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x13' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='55' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x14' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='56' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x15' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='57' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x16' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='58' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x17' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='59' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x18' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='60' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x19' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='61' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1a' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='62' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='63' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1c' 
+function='0x0'/>
+    </controller>
+    <controller type='scsi' index='64' model='virtio-scsi'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1d' 
+function='0x0'/>
+    </controller>
+    <controller type='pci' index='0' model='pci-root'/>
+    <controller type='pci' index='1' model='pci-bridge'>
+      <model name='pci-bridge'/>
+      <target chassisNr='1'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' 
+function='0x0'/>
+    </controller>
+    <controller type='pci' index='2' model='pci-bridge'>
+      <model name='pci-bridge'/>
+      <target chassisNr='2'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1f' 
+function='0x0'/>
+    </controller>
+  </devices>
+
+vm disks xml (only virtio disks):
+  <devices>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native'/>
+      <source file='/vms/tempp/vm-os'/>
+      <target dev='vda' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data2'/>
+      <target dev='vdb' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data3'/>
+      <target dev='vdc' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data4'/>
+      <target dev='vdd' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data5'/>
+      <target dev='vde' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data6'/>
+      <target dev='vdf' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data7'/>
+      <target dev='vdg' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data8'/>
+      <target dev='vdh' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data9'/>
+      <target dev='vdi' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x10' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data10'/>
+      <target dev='vdj' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x11' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data11'/>
+      <target dev='vdk' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x12' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data12'/>
+      <target dev='vdl' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x13' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data13'/>
+      <target dev='vdm' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x14' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data14'/>
+      <target dev='vdn' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x15' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data15'/>
+      <target dev='vdo' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x16' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data16'/>
+      <target dev='vdp' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x17' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data17'/>
+      <target dev='vdq' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x18' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data18'/>
+      <target dev='vdr' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x19' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data19'/>
+      <target dev='vds' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1a' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data20'/>
+      <target dev='vdt' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data21'/>
+      <target dev='vdu' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1c' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data22'/>
+      <target dev='vdv' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1d' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data23'/>
+      <target dev='vdw' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data24'/>
+      <target dev='vdx' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x01' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data25'/>
+      <target dev='vdy' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x03' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data26'/>
+      <target dev='vdz' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x04' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data27'/>
+      <target dev='vdaa' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x05' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data28'/>
+      <target dev='vdab' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x06' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data29'/>
+      <target dev='vdac' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x07' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data30'/>
+      <target dev='vdad' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x08' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data31'/>
+      <target dev='vdae' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x09' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data32'/>
+      <target dev='vdaf' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0a' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data33'/>
+      <target dev='vdag' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0b' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data34'/>
+      <target dev='vdah' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0c' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data35'/>
+      <target dev='vdai' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0d' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data36'/>
+      <target dev='vdaj' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0e' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data37'/>
+      <target dev='vdak' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x0f' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data38'/>
+      <target dev='vdal' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x10' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data39'/>
+      <target dev='vdam' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x11' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data40'/>
+      <target dev='vdan' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x12' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data41'/>
+      <target dev='vdao' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x13' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data42'/>
+      <target dev='vdap' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x14' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data43'/>
+      <target dev='vdaq' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x15' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data44'/>
+      <target dev='vdar' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x16' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data45'/>
+      <target dev='vdas' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x17' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data46'/>
+      <target dev='vdat' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x18' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data47'/>
+      <target dev='vdau' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x19' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data48'/>
+      <target dev='vdav' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1a' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data49'/>
+      <target dev='vdaw' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1b' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data50'/>
+      <target dev='vdax' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1c' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data51'/>
+      <target dev='vday' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1d' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data52'/>
+      <target dev='vdaz' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1e' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data53'/>
+      <target dev='vdba' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data54'/>
+      <target dev='vdbb' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data55'/>
+      <target dev='vdbc' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x03' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data56'/>
+      <target dev='vdbd' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x04' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data57'/>
+      <target dev='vdbe' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x05' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data58'/>
+      <target dev='vdbf' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x06' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data59'/>
+      <target dev='vdbg' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x07' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data60'/>
+      <target dev='vdbh' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x08' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data61'/>
+      <target dev='vdbi' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x09' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data62'/>
+      <target dev='vdbj' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0a' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data63'/>
+      <target dev='vdbk' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x0b' 
+function='0x0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2' cache='directsync' io='native' 
+discard='unmap'/>
+      <source file='/vms/tempp/vm-data1'/>
+      <target dev='vdbl' bus='virtio'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' 
+function='0x0'/>
+    </disk>
+    <controller type='pci' index='0' model='pci-root'/>
+    <controller type='pci' index='1' model='pci-bridge'>
+      <model name='pci-bridge'/>
+      <target chassisNr='1'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' 
+function='0x0'/>
+    </controller>
+    <controller type='pci' index='2' model='pci-bridge'>
+      <model name='pci-bridge'/>
+      <target chassisNr='2'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x1f' 
+function='0x0'/>
+    </controller>
+  </devices>
+
+>
+> (3) migrate vm and vm’disks
+>
+>
+What do you mean by 'and vm disks' - are you doing a block migration?
+>
+Yes, block migration.
+In fact, only migration domain also reproduced.
+
+>
+Dave
+>
+>
+> ----------------------------------------------------------------------
+>
+> ---------------------------------------------------------------
+>
+Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
+-------------------------------------------------------------------------------------------------------------------------------------
+本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
+的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
+或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
+邮件！
+This e-mail and its attachments contain confidential information from New H3C, 
+which is
+intended only for the person or entity whose address is listed above. Any use 
+of the
+information contained herein in any way (including, but not limited to, total 
+or partial
+disclosure, reproduction, or dissemination) by persons other than the intended
+recipient(s) is prohibited. If you receive this e-mail in error, please notify 
+the sender
+by phone or email immediately and delete it!
+
diff --git a/results/classifier/zero-shot/010/review/73660729 b/results/classifier/zero-shot/010/review/73660729
new file mode 100644
index 00000000..c0f234cd
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/73660729
@@ -0,0 +1,55 @@
+graphic: 0.858
+performance: 0.786
+semantic: 0.698
+device: 0.697
+files: 0.640
+other: 0.620
+network: 0.598
+debug: 0.580
+socket: 0.556
+PID: 0.549
+vnc: 0.467
+permissions: 0.403
+boot: 0.367
+KVM: 0.272
+debug: 0.925
+files: 0.096
+device: 0.035
+other: 0.027
+network: 0.013
+PID: 0.009
+performance: 0.006
+socket: 0.005
+semantic: 0.003
+KVM: 0.001
+boot: 0.001
+graphic: 0.001
+permissions: 0.001
+vnc: 0.001
+
+[BUG]The latest qemu crashed when I tested cxl
+
+I test cxl with the patch:[v11,0/2] arm/virt:
+ CXL support via pxb_cxl.
+https://patchwork.kernel.org/project/cxl/cover/20220616141950.23374-1-Jonathan.Cameron@huawei.com/
+But the qemu crashed,and showing an error:
+qemu-system-aarch64: ../hw/arm/virt.c:1735: virt_get_high_memmap_enabled:
+ Assertion `ARRAY_SIZE(extended_memmap) - VIRT_LOWMEMMAP_LAST == ARRAY_SIZE(enabled_array)' failed.
+Then I modify the patch to fix the bug:
+diff --git a/hw/arm/virt.c b/hw/arm/virt.c
+index ea2413a0ba..3d4cee3491 100644
+--- a/hw/arm/virt.c
++++ b/hw/arm/virt.c
+@@ -1710,6 +1730,7 @@ static inline bool *virt_get_high_memmap_enabled(VirtMachineState
+ *vms,
+&vms->highmem_redists,
+&vms->highmem_ecam,
+&vms->highmem_mmio,
++ &vms->cxl_devices_state.is_enabled,
+};
+Now qemu works good.
+Could you tell me when the patch(
+arm/virt:
+ CXL support via pxb_cxl
+) will be merged into upstream?
+
diff --git a/results/classifier/zero-shot/010/review/74466963 b/results/classifier/zero-shot/010/review/74466963
new file mode 100644
index 00000000..467c124c
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/74466963
@@ -0,0 +1,1902 @@
+device: 0.909
+permissions: 0.907
+KVM: 0.903
+debug: 0.897
+files: 0.896
+graphic: 0.895
+boot: 0.894
+performance: 0.892
+semantic: 0.891
+PID: 0.886
+socket: 0.879
+vnc: 0.878
+other: 0.877
+network: 0.871
+vnc: 0.807
+debug: 0.545
+network: 0.046
+socket: 0.038
+boot: 0.036
+device: 0.027
+PID: 0.016
+other: 0.015
+files: 0.014
+semantic: 0.006
+performance: 0.005
+KVM: 0.003
+permissions: 0.002
+graphic: 0.001
+
+[Qemu-devel] [TCG only][Migration Bug? ] Occasionally, the content of VM's memory is inconsistent between Source and Destination of migration
+
+Hi all,
+
+Does anyboday remember the similar issue post by hailiang months ago
+http://patchwork.ozlabs.org/patch/454322/
+At least tow bugs about migration had been fixed since that.
+And now we found the same issue at the tcg vm(kvm is fine), after
+migration, the content VM's memory is inconsistent.
+we add a patch to check memory content, you can find it from affix
+
+steps to reporduce:
+1) apply the patch and re-build qemu
+2) prepare the ubuntu guest and run memtest in grub.
+soruce side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off
+destination side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+3) start migration
+with 1000M NIC, migration will finish within 3 min.
+
+at source:
+(qemu) migrate tcp:192.168.2.66:8881
+after saving ram complete
+e9e725df678d392b1a83b3a917f332bb
+qemu-system-x86_64: end ram md5
+(qemu)
+
+at destination:
+...skip...
+Completed load of VM with exit code 0 seq iteration 1264
+Completed load of VM with exit code 0 seq iteration 1265
+Completed load of VM with exit code 0 seq iteration 1266
+qemu-system-x86_64: after loading state section id 2(ram)
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+
+This occurs occasionally and only at tcg machine. It seems that
+some pages dirtied in source side don't transferred to destination.
+This problem can be reproduced even if we disable virtio.
+Is it OK for some pages that not transferred to destination when do
+migration ? Or is it a bug?
+Any idea...
+
+=================md5 check patch=============================
+
+diff --git a/Makefile.target b/Makefile.target
+index 962d004..e2cb8e9 100644
+--- a/Makefile.target
++++ b/Makefile.target
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+ obj-y += memory_mapping.o
+ obj-y += dump.o
+ obj-y += migration/ram.o migration/savevm.o
+-LIBS := $(libs_softmmu) $(LIBS)
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+
+ # xen support
+ obj-$(CONFIG_XEN) += xen-common.o
+diff --git a/migration/ram.c b/migration/ram.c
+index 1eb155a..3b7a09d 100644
+--- a/migration/ram.c
++++ b/migration/ram.c
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+version_id)
+}
+
+     rcu_read_unlock();
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
++    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+             "%" PRIu64 "\n", ret, seq_iter);
+     return ret;
+ }
+diff --git a/migration/savevm.c b/migration/savevm.c
+index 0ad1b93..3feaa61 100644
+--- a/migration/savevm.c
++++ b/migration/savevm.c
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+
+ }
+
++#include "exec/ram_addr.h"
++#include "qemu/rcu_queue.h"
++#include <clplumbing/md5.h>
++#ifndef MD5_DIGEST_LENGTH
++#define MD5_DIGEST_LENGTH 16
++#endif
++
++static void check_host_md5(void)
++{
++    int i;
++    unsigned char md[MD5_DIGEST_LENGTH];
++    rcu_read_lock();
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+'pc.ram' block */
++    rcu_read_unlock();
++
++    MD5(block->host, block->used_length, md);
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
++        fprintf(stderr, "%02x", md[i]);
++    }
++    fprintf(stderr, "\n");
++    error_report("end ram md5");
++}
++
+ void qemu_savevm_state_begin(QEMUFile *f,
+                              const MigrationParams *params)
+ {
+@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile
+*f, bool iterable_only)
+save_section_header(f, se, QEMU_VM_SECTION_END);
+
+         ret = se->ops->save_live_complete_precopy(f, se->opaque);
++
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
++        check_host_md5();
++
+         trace_savevm_section_end(se->idstr, se->section_id, ret);
+         save_section_footer(f, se);
+         if (ret < 0) {
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+MigrationIncomingState *mis)
+section_id, le->se->idstr);
+                 return ret;
+             }
++            if (section_type == QEMU_VM_SECTION_END) {
++                error_report("after loading state section id %d(%s)",
++                             section_id, le->se->idstr);
++                check_host_md5();
++            }
+             if (!check_section_footer(f, le)) {
+                 return -EINVAL;
+             }
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+     }
+
+     cpu_synchronize_all_post_init();
++    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
++    check_host_md5();
+
+     return ret;
+ }
+
+* Li Zhijian (address@hidden) wrote:
+>
+Hi all,
+>
+>
+Does anyboday remember the similar issue post by hailiang months ago
+>
+http://patchwork.ozlabs.org/patch/454322/
+>
+At least tow bugs about migration had been fixed since that.
+Yes, I wondered what happened to that.
+
+>
+And now we found the same issue at the tcg vm(kvm is fine), after migration,
+>
+the content VM's memory is inconsistent.
+Hmm, TCG only - I don't know much about that; but I guess something must
+be accessing memory without using the proper macros/functions so
+it doesn't mark it as dirty.
+
+>
+we add a patch to check memory content, you can find it from affix
+>
+>
+steps to reporduce:
+>
+1) apply the patch and re-build qemu
+>
+2) prepare the ubuntu guest and run memtest in grub.
+>
+soruce side:
+>
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+pc-i440fx-2.3,accel=tcg,usb=off
+>
+>
+destination side:
+>
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+>
+>
+3) start migration
+>
+with 1000M NIC, migration will finish within 3 min.
+>
+>
+at source:
+>
+(qemu) migrate tcp:192.168.2.66:8881
+>
+after saving ram complete
+>
+e9e725df678d392b1a83b3a917f332bb
+>
+qemu-system-x86_64: end ram md5
+>
+(qemu)
+>
+>
+at destination:
+>
+...skip...
+>
+Completed load of VM with exit code 0 seq iteration 1264
+>
+Completed load of VM with exit code 0 seq iteration 1265
+>
+Completed load of VM with exit code 0 seq iteration 1266
+>
+qemu-system-x86_64: after loading state section id 2(ram)
+>
+49c2dac7bde0e5e22db7280dcb3824f9
+>
+qemu-system-x86_64: end ram md5
+>
+qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+>
+>
+49c2dac7bde0e5e22db7280dcb3824f9
+>
+qemu-system-x86_64: end ram md5
+>
+>
+This occurs occasionally and only at tcg machine. It seems that
+>
+some pages dirtied in source side don't transferred to destination.
+>
+This problem can be reproduced even if we disable virtio.
+>
+>
+Is it OK for some pages that not transferred to destination when do
+>
+migration ? Or is it a bug?
+I'm pretty sure that means it's a bug.  Hard to find though, I guess
+at least memtest is smaller than a big OS.  I think I'd dump the whole
+of memory on both sides, hexdump and diff them  - I'd guess it would
+just be one byte/word different, maybe that would offer some idea what
+wrote it.
+
+Dave
+
+>
+Any idea...
+>
+>
+=================md5 check patch=============================
+>
+>
+diff --git a/Makefile.target b/Makefile.target
+>
+index 962d004..e2cb8e9 100644
+>
+--- a/Makefile.target
+>
++++ b/Makefile.target
+>
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+>
+obj-y += memory_mapping.o
+>
+obj-y += dump.o
+>
+obj-y += migration/ram.o migration/savevm.o
+>
+-LIBS := $(libs_softmmu) $(LIBS)
+>
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+>
+>
+# xen support
+>
+obj-$(CONFIG_XEN) += xen-common.o
+>
+diff --git a/migration/ram.c b/migration/ram.c
+>
+index 1eb155a..3b7a09d 100644
+>
+--- a/migration/ram.c
+>
++++ b/migration/ram.c
+>
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+>
+version_id)
+>
+}
+>
+>
+rcu_read_unlock();
+>
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
+>
++    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+>
+"%" PRIu64 "\n", ret, seq_iter);
+>
+return ret;
+>
+}
+>
+diff --git a/migration/savevm.c b/migration/savevm.c
+>
+index 0ad1b93..3feaa61 100644
+>
+--- a/migration/savevm.c
+>
++++ b/migration/savevm.c
+>
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+>
+>
+}
+>
+>
++#include "exec/ram_addr.h"
+>
++#include "qemu/rcu_queue.h"
+>
++#include <clplumbing/md5.h>
+>
++#ifndef MD5_DIGEST_LENGTH
+>
++#define MD5_DIGEST_LENGTH 16
+>
++#endif
+>
++
+>
++static void check_host_md5(void)
+>
++{
+>
++    int i;
+>
++    unsigned char md[MD5_DIGEST_LENGTH];
+>
++    rcu_read_lock();
+>
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+>
+'pc.ram' block */
+>
++    rcu_read_unlock();
+>
++
+>
++    MD5(block->host, block->used_length, md);
+>
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
+>
++        fprintf(stderr, "%02x", md[i]);
+>
++    }
+>
++    fprintf(stderr, "\n");
+>
++    error_report("end ram md5");
+>
++}
+>
++
+>
+void qemu_savevm_state_begin(QEMUFile *f,
+>
+const MigrationParams *params)
+>
+{
+>
+@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
+>
+bool iterable_only)
+>
+save_section_header(f, se, QEMU_VM_SECTION_END);
+>
+>
+ret = se->ops->save_live_complete_precopy(f, se->opaque);
+>
++
+>
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
+>
++        check_host_md5();
+>
++
+>
+trace_savevm_section_end(se->idstr, se->section_id, ret);
+>
+save_section_footer(f, se);
+>
+if (ret < 0) {
+>
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+>
+MigrationIncomingState *mis)
+>
+section_id, le->se->idstr);
+>
+return ret;
+>
+}
+>
++            if (section_type == QEMU_VM_SECTION_END) {
+>
++                error_report("after loading state section id %d(%s)",
+>
++                             section_id, le->se->idstr);
+>
++                check_host_md5();
+>
++            }
+>
+if (!check_section_footer(f, le)) {
+>
+return -EINVAL;
+>
+}
+>
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+>
+}
+>
+>
+cpu_synchronize_all_post_init();
+>
++    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
+>
++    check_host_md5();
+>
+>
+return ret;
+>
+}
+>
+>
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On 2015/12/3 17:24, Dr. David Alan Gilbert wrote:
+* Li Zhijian (address@hidden) wrote:
+Hi all,
+
+Does anyboday remember the similar issue post by hailiang months ago
+http://patchwork.ozlabs.org/patch/454322/
+At least tow bugs about migration had been fixed since that.
+Yes, I wondered what happened to that.
+And now we found the same issue at the tcg vm(kvm is fine), after migration,
+the content VM's memory is inconsistent.
+Hmm, TCG only - I don't know much about that; but I guess something must
+be accessing memory without using the proper macros/functions so
+it doesn't mark it as dirty.
+we add a patch to check memory content, you can find it from affix
+
+steps to reporduce:
+1) apply the patch and re-build qemu
+2) prepare the ubuntu guest and run memtest in grub.
+soruce side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off
+
+destination side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+
+3) start migration
+with 1000M NIC, migration will finish within 3 min.
+
+at source:
+(qemu) migrate tcp:192.168.2.66:8881
+after saving ram complete
+e9e725df678d392b1a83b3a917f332bb
+qemu-system-x86_64: end ram md5
+(qemu)
+
+at destination:
+...skip...
+Completed load of VM with exit code 0 seq iteration 1264
+Completed load of VM with exit code 0 seq iteration 1265
+Completed load of VM with exit code 0 seq iteration 1266
+qemu-system-x86_64: after loading state section id 2(ram)
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+
+This occurs occasionally and only at tcg machine. It seems that
+some pages dirtied in source side don't transferred to destination.
+This problem can be reproduced even if we disable virtio.
+
+Is it OK for some pages that not transferred to destination when do
+migration ? Or is it a bug?
+I'm pretty sure that means it's a bug.  Hard to find though, I guess
+at least memtest is smaller than a big OS.  I think I'd dump the whole
+of memory on both sides, hexdump and diff them  - I'd guess it would
+just be one byte/word different, maybe that would offer some idea what
+wrote it.
+Maybe one better way to do that is with the help of userfaultfd's write-protect
+capability. It is still in the development by Andrea Arcangeli, but there
+is a RFC version available, please refer to
+http://www.spinics.net/lists/linux-mm/msg97422.html
+（I'm developing live memory snapshot which based on it, maybe this is another 
+scene where we
+can use userfaultfd's WP ;) ).
+Dave
+Any idea...
+
+=================md5 check patch=============================
+
+diff --git a/Makefile.target b/Makefile.target
+index 962d004..e2cb8e9 100644
+--- a/Makefile.target
++++ b/Makefile.target
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+  obj-y += memory_mapping.o
+  obj-y += dump.o
+  obj-y += migration/ram.o migration/savevm.o
+-LIBS := $(libs_softmmu) $(LIBS)
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+
+  # xen support
+  obj-$(CONFIG_XEN) += xen-common.o
+diff --git a/migration/ram.c b/migration/ram.c
+index 1eb155a..3b7a09d 100644
+--- a/migration/ram.c
++++ b/migration/ram.c
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+version_id)
+      }
+
+      rcu_read_unlock();
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
++    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+              "%" PRIu64 "\n", ret, seq_iter);
+      return ret;
+  }
+diff --git a/migration/savevm.c b/migration/savevm.c
+index 0ad1b93..3feaa61 100644
+--- a/migration/savevm.c
++++ b/migration/savevm.c
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+
+  }
+
++#include "exec/ram_addr.h"
++#include "qemu/rcu_queue.h"
++#include <clplumbing/md5.h>
++#ifndef MD5_DIGEST_LENGTH
++#define MD5_DIGEST_LENGTH 16
++#endif
++
++static void check_host_md5(void)
++{
++    int i;
++    unsigned char md[MD5_DIGEST_LENGTH];
++    rcu_read_lock();
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+'pc.ram' block */
++    rcu_read_unlock();
++
++    MD5(block->host, block->used_length, md);
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
++        fprintf(stderr, "%02x", md[i]);
++    }
++    fprintf(stderr, "\n");
++    error_report("end ram md5");
++}
++
+  void qemu_savevm_state_begin(QEMUFile *f,
+                               const MigrationParams *params)
+  {
+@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
+bool iterable_only)
+          save_section_header(f, se, QEMU_VM_SECTION_END);
+
+          ret = se->ops->save_live_complete_precopy(f, se->opaque);
++
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
++        check_host_md5();
++
+          trace_savevm_section_end(se->idstr, se->section_id, ret);
+          save_section_footer(f, se);
+          if (ret < 0) {
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+MigrationIncomingState *mis)
+                               section_id, le->se->idstr);
+                  return ret;
+              }
++            if (section_type == QEMU_VM_SECTION_END) {
++                error_report("after loading state section id %d(%s)",
++                             section_id, le->se->idstr);
++                check_host_md5();
++            }
+              if (!check_section_footer(f, le)) {
+                  return -EINVAL;
+              }
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+      }
+
+      cpu_synchronize_all_post_init();
++    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
++    check_host_md5();
+
+      return ret;
+  }
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+.
+
+On 12/03/2015 05:37 PM, Hailiang Zhang wrote:
+On 2015/12/3 17:24, Dr. David Alan Gilbert wrote:
+* Li Zhijian (address@hidden) wrote:
+Hi all,
+
+Does anyboday remember the similar issue post by hailiang months ago
+http://patchwork.ozlabs.org/patch/454322/
+At least tow bugs about migration had been fixed since that.
+Yes, I wondered what happened to that.
+And now we found the same issue at the tcg vm(kvm is fine), after
+migration,
+the content VM's memory is inconsistent.
+Hmm, TCG only - I don't know much about that; but I guess something must
+be accessing memory without using the proper macros/functions so
+it doesn't mark it as dirty.
+we add a patch to check memory content, you can find it from affix
+
+steps to reporduce:
+1) apply the patch and re-build qemu
+2) prepare the ubuntu guest and run memtest in grub.
+soruce side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off
+
+destination side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+
+3) start migration
+with 1000M NIC, migration will finish within 3 min.
+
+at source:
+(qemu) migrate tcp:192.168.2.66:8881
+after saving ram complete
+e9e725df678d392b1a83b3a917f332bb
+qemu-system-x86_64: end ram md5
+(qemu)
+
+at destination:
+...skip...
+Completed load of VM with exit code 0 seq iteration 1264
+Completed load of VM with exit code 0 seq iteration 1265
+Completed load of VM with exit code 0 seq iteration 1266
+qemu-system-x86_64: after loading state section id 2(ram)
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+qemu-system-x86_64: qemu_loadvm_state: after
+cpu_synchronize_all_post_init
+
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+
+This occurs occasionally and only at tcg machine. It seems that
+some pages dirtied in source side don't transferred to destination.
+This problem can be reproduced even if we disable virtio.
+
+Is it OK for some pages that not transferred to destination when do
+migration ? Or is it a bug?
+I'm pretty sure that means it's a bug.  Hard to find though, I guess
+at least memtest is smaller than a big OS.  I think I'd dump the whole
+of memory on both sides, hexdump and diff them  - I'd guess it would
+just be one byte/word different, maybe that would offer some idea what
+wrote it.
+Maybe one better way to do that is with the help of userfaultfd's
+write-protect
+capability. It is still in the development by Andrea Arcangeli, but there
+is a RFC version available, please refer to
+http://www.spinics.net/lists/linux-mm/msg97422.html
+（I'm developing live memory snapshot which based on it, maybe this is
+another scene where we
+can use userfaultfd's WP ;) ).
+sounds good.
+
+thanks
+Li
+Dave
+Any idea...
+
+=================md5 check patch=============================
+
+diff --git a/Makefile.target b/Makefile.target
+index 962d004..e2cb8e9 100644
+--- a/Makefile.target
++++ b/Makefile.target
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+  obj-y += memory_mapping.o
+  obj-y += dump.o
+  obj-y += migration/ram.o migration/savevm.o
+-LIBS := $(libs_softmmu) $(LIBS)
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+
+  # xen support
+  obj-$(CONFIG_XEN) += xen-common.o
+diff --git a/migration/ram.c b/migration/ram.c
+index 1eb155a..3b7a09d 100644
+--- a/migration/ram.c
++++ b/migration/ram.c
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+version_id)
+      }
+
+      rcu_read_unlock();
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
++    fprintf(stderr, "Completed load of VM with exit code %d seq
+iteration "
+              "%" PRIu64 "\n", ret, seq_iter);
+      return ret;
+  }
+diff --git a/migration/savevm.c b/migration/savevm.c
+index 0ad1b93..3feaa61 100644
+--- a/migration/savevm.c
++++ b/migration/savevm.c
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+
+  }
+
++#include "exec/ram_addr.h"
++#include "qemu/rcu_queue.h"
++#include <clplumbing/md5.h>
++#ifndef MD5_DIGEST_LENGTH
++#define MD5_DIGEST_LENGTH 16
++#endif
++
++static void check_host_md5(void)
++{
++    int i;
++    unsigned char md[MD5_DIGEST_LENGTH];
++    rcu_read_lock();
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+'pc.ram' block */
++    rcu_read_unlock();
++
++    MD5(block->host, block->used_length, md);
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
++        fprintf(stderr, "%02x", md[i]);
++    }
++    fprintf(stderr, "\n");
++    error_report("end ram md5");
++}
++
+  void qemu_savevm_state_begin(QEMUFile *f,
+                               const MigrationParams *params)
+  {
+@@ -1056,6 +1079,10 @@ void
+qemu_savevm_state_complete_precopy(QEMUFile *f,
+bool iterable_only)
+          save_section_header(f, se, QEMU_VM_SECTION_END);
+
+          ret = se->ops->save_live_complete_precopy(f, se->opaque);
++
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
++        check_host_md5();
++
+          trace_savevm_section_end(se->idstr, se->section_id, ret);
+          save_section_footer(f, se);
+          if (ret < 0) {
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+MigrationIncomingState *mis)
+                               section_id, le->se->idstr);
+                  return ret;
+              }
++            if (section_type == QEMU_VM_SECTION_END) {
++                error_report("after loading state section id %d(%s)",
++                             section_id, le->se->idstr);
++                check_host_md5();
++            }
+              if (!check_section_footer(f, le)) {
+                  return -EINVAL;
+              }
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+      }
+
+      cpu_synchronize_all_post_init();
++    error_report("%s: after cpu_synchronize_all_post_init\n",
+__func__);
++    check_host_md5();
+
+      return ret;
+  }
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+.
+.
+--
+Best regards.
+Li Zhijian (8555)
+
+On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote:
+* Li Zhijian (address@hidden) wrote:
+Hi all,
+
+Does anyboday remember the similar issue post by hailiang months ago
+http://patchwork.ozlabs.org/patch/454322/
+At least tow bugs about migration had been fixed since that.
+Yes, I wondered what happened to that.
+And now we found the same issue at the tcg vm(kvm is fine), after migration,
+the content VM's memory is inconsistent.
+Hmm, TCG only - I don't know much about that; but I guess something must
+be accessing memory without using the proper macros/functions so
+it doesn't mark it as dirty.
+we add a patch to check memory content, you can find it from affix
+
+steps to reporduce:
+1) apply the patch and re-build qemu
+2) prepare the ubuntu guest and run memtest in grub.
+soruce side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off
+
+destination side:
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+
+3) start migration
+with 1000M NIC, migration will finish within 3 min.
+
+at source:
+(qemu) migrate tcp:192.168.2.66:8881
+after saving ram complete
+e9e725df678d392b1a83b3a917f332bb
+qemu-system-x86_64: end ram md5
+(qemu)
+
+at destination:
+...skip...
+Completed load of VM with exit code 0 seq iteration 1264
+Completed load of VM with exit code 0 seq iteration 1265
+Completed load of VM with exit code 0 seq iteration 1266
+qemu-system-x86_64: after loading state section id 2(ram)
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+
+49c2dac7bde0e5e22db7280dcb3824f9
+qemu-system-x86_64: end ram md5
+
+This occurs occasionally and only at tcg machine. It seems that
+some pages dirtied in source side don't transferred to destination.
+This problem can be reproduced even if we disable virtio.
+
+Is it OK for some pages that not transferred to destination when do
+migration ? Or is it a bug?
+I'm pretty sure that means it's a bug.  Hard to find though, I guess
+at least memtest is smaller than a big OS.  I think I'd dump the whole
+of memory on both sides, hexdump and diff them  - I'd guess it would
+just be one byte/word different, maybe that would offer some idea what
+wrote it.
+I try to dump and compare them, more than 10 pages are different.
+in source side, they are random value rather than always 'FF' 'FB' 'EF'
+'BF'... in destination.
+and not all of the different pages are continuous.
+
+thanks
+Li
+Dave
+Any idea...
+
+=================md5 check patch=============================
+
+diff --git a/Makefile.target b/Makefile.target
+index 962d004..e2cb8e9 100644
+--- a/Makefile.target
++++ b/Makefile.target
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+  obj-y += memory_mapping.o
+  obj-y += dump.o
+  obj-y += migration/ram.o migration/savevm.o
+-LIBS := $(libs_softmmu) $(LIBS)
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+
+  # xen support
+  obj-$(CONFIG_XEN) += xen-common.o
+diff --git a/migration/ram.c b/migration/ram.c
+index 1eb155a..3b7a09d 100644
+--- a/migration/ram.c
++++ b/migration/ram.c
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+version_id)
+      }
+
+      rcu_read_unlock();
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
++    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+              "%" PRIu64 "\n", ret, seq_iter);
+      return ret;
+  }
+diff --git a/migration/savevm.c b/migration/savevm.c
+index 0ad1b93..3feaa61 100644
+--- a/migration/savevm.c
++++ b/migration/savevm.c
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+
+  }
+
++#include "exec/ram_addr.h"
++#include "qemu/rcu_queue.h"
++#include <clplumbing/md5.h>
++#ifndef MD5_DIGEST_LENGTH
++#define MD5_DIGEST_LENGTH 16
++#endif
++
++static void check_host_md5(void)
++{
++    int i;
++    unsigned char md[MD5_DIGEST_LENGTH];
++    rcu_read_lock();
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+'pc.ram' block */
++    rcu_read_unlock();
++
++    MD5(block->host, block->used_length, md);
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
++        fprintf(stderr, "%02x", md[i]);
++    }
++    fprintf(stderr, "\n");
++    error_report("end ram md5");
++}
++
+  void qemu_savevm_state_begin(QEMUFile *f,
+                               const MigrationParams *params)
+  {
+@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
+bool iterable_only)
+          save_section_header(f, se, QEMU_VM_SECTION_END);
+
+          ret = se->ops->save_live_complete_precopy(f, se->opaque);
++
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
++        check_host_md5();
++
+          trace_savevm_section_end(se->idstr, se->section_id, ret);
+          save_section_footer(f, se);
+          if (ret < 0) {
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+MigrationIncomingState *mis)
+                               section_id, le->se->idstr);
+                  return ret;
+              }
++            if (section_type == QEMU_VM_SECTION_END) {
++                error_report("after loading state section id %d(%s)",
++                             section_id, le->se->idstr);
++                check_host_md5();
++            }
+              if (!check_section_footer(f, le)) {
+                  return -EINVAL;
+              }
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+      }
+
+      cpu_synchronize_all_post_init();
++    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
++    check_host_md5();
+
+      return ret;
+  }
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+
+.
+--
+Best regards.
+Li Zhijian (8555)
+
+* Li Zhijian (address@hidden) wrote:
+>
+>
+>
+On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote:
+>
+>* Li Zhijian (address@hidden) wrote:
+>
+>>Hi all,
+>
+>>
+>
+>>Does anyboday remember the similar issue post by hailiang months ago
+>
+>>
+http://patchwork.ozlabs.org/patch/454322/
+>
+>>At least tow bugs about migration had been fixed since that.
+>
+>
+>
+>Yes, I wondered what happened to that.
+>
+>
+>
+>>And now we found the same issue at the tcg vm(kvm is fine), after migration,
+>
+>>the content VM's memory is inconsistent.
+>
+>
+>
+>Hmm, TCG only - I don't know much about that; but I guess something must
+>
+>be accessing memory without using the proper macros/functions so
+>
+>it doesn't mark it as dirty.
+>
+>
+>
+>>we add a patch to check memory content, you can find it from affix
+>
+>>
+>
+>>steps to reporduce:
+>
+>>1) apply the patch and re-build qemu
+>
+>>2) prepare the ubuntu guest and run memtest in grub.
+>
+>>soruce side:
+>
+>>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+>>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+>>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+>>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+>>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+>>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+>>pc-i440fx-2.3,accel=tcg,usb=off
+>
+>>
+>
+>>destination side:
+>
+>>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+>>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+>>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+>>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+>>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+>>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+>>pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+>
+>>
+>
+>>3) start migration
+>
+>>with 1000M NIC, migration will finish within 3 min.
+>
+>>
+>
+>>at source:
+>
+>>(qemu) migrate tcp:192.168.2.66:8881
+>
+>>after saving ram complete
+>
+>>e9e725df678d392b1a83b3a917f332bb
+>
+>>qemu-system-x86_64: end ram md5
+>
+>>(qemu)
+>
+>>
+>
+>>at destination:
+>
+>>...skip...
+>
+>>Completed load of VM with exit code 0 seq iteration 1264
+>
+>>Completed load of VM with exit code 0 seq iteration 1265
+>
+>>Completed load of VM with exit code 0 seq iteration 1266
+>
+>>qemu-system-x86_64: after loading state section id 2(ram)
+>
+>>49c2dac7bde0e5e22db7280dcb3824f9
+>
+>>qemu-system-x86_64: end ram md5
+>
+>>qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+>
+>>
+>
+>>49c2dac7bde0e5e22db7280dcb3824f9
+>
+>>qemu-system-x86_64: end ram md5
+>
+>>
+>
+>>This occurs occasionally and only at tcg machine. It seems that
+>
+>>some pages dirtied in source side don't transferred to destination.
+>
+>>This problem can be reproduced even if we disable virtio.
+>
+>>
+>
+>>Is it OK for some pages that not transferred to destination when do
+>
+>>migration ? Or is it a bug?
+>
+>
+>
+>I'm pretty sure that means it's a bug.  Hard to find though, I guess
+>
+>at least memtest is smaller than a big OS.  I think I'd dump the whole
+>
+>of memory on both sides, hexdump and diff them  - I'd guess it would
+>
+>just be one byte/word different, maybe that would offer some idea what
+>
+>wrote it.
+>
+>
+I try to dump and compare them, more than 10 pages are different.
+>
+in source side, they are random value rather than always 'FF' 'FB' 'EF'
+>
+'BF'... in destination.
+>
+>
+and not all of the different pages are continuous.
+I wonder if it happens on all of memtest's different test patterns,
+perhaps it might be possible to narrow it down if you tell memtest
+to only run one test at a time.
+
+Dave
+
+>
+>
+thanks
+>
+Li
+>
+>
+>
+>
+>
+>Dave
+>
+>
+>
+>>Any idea...
+>
+>>
+>
+>>=================md5 check patch=============================
+>
+>>
+>
+>>diff --git a/Makefile.target b/Makefile.target
+>
+>>index 962d004..e2cb8e9 100644
+>
+>>--- a/Makefile.target
+>
+>>+++ b/Makefile.target
+>
+>>@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+>
+>>  obj-y += memory_mapping.o
+>
+>>  obj-y += dump.o
+>
+>>  obj-y += migration/ram.o migration/savevm.o
+>
+>>-LIBS := $(libs_softmmu) $(LIBS)
+>
+>>+LIBS := $(libs_softmmu) $(LIBS) -lplumb
+>
+>>
+>
+>>  # xen support
+>
+>>  obj-$(CONFIG_XEN) += xen-common.o
+>
+>>diff --git a/migration/ram.c b/migration/ram.c
+>
+>>index 1eb155a..3b7a09d 100644
+>
+>>--- a/migration/ram.c
+>
+>>+++ b/migration/ram.c
+>
+>>@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
+>
+>>version_id)
+>
+>>      }
+>
+>>
+>
+>>      rcu_read_unlock();
+>
+>>-    DPRINTF("Completed load of VM with exit code %d seq iteration "
+>
+>>+    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+>
+>>              "%" PRIu64 "\n", ret, seq_iter);
+>
+>>      return ret;
+>
+>>  }
+>
+>>diff --git a/migration/savevm.c b/migration/savevm.c
+>
+>>index 0ad1b93..3feaa61 100644
+>
+>>--- a/migration/savevm.c
+>
+>>+++ b/migration/savevm.c
+>
+>>@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+>
+>>
+>
+>>  }
+>
+>>
+>
+>>+#include "exec/ram_addr.h"
+>
+>>+#include "qemu/rcu_queue.h"
+>
+>>+#include <clplumbing/md5.h>
+>
+>>+#ifndef MD5_DIGEST_LENGTH
+>
+>>+#define MD5_DIGEST_LENGTH 16
+>
+>>+#endif
+>
+>>+
+>
+>>+static void check_host_md5(void)
+>
+>>+{
+>
+>>+    int i;
+>
+>>+    unsigned char md[MD5_DIGEST_LENGTH];
+>
+>>+    rcu_read_lock();
+>
+>>+    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+>
+>>'pc.ram' block */
+>
+>>+    rcu_read_unlock();
+>
+>>+
+>
+>>+    MD5(block->host, block->used_length, md);
+>
+>>+    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
+>
+>>+        fprintf(stderr, "%02x", md[i]);
+>
+>>+    }
+>
+>>+    fprintf(stderr, "\n");
+>
+>>+    error_report("end ram md5");
+>
+>>+}
+>
+>>+
+>
+>>  void qemu_savevm_state_begin(QEMUFile *f,
+>
+>>                               const MigrationParams *params)
+>
+>>  {
+>
+>>@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f,
+>
+>>bool iterable_only)
+>
+>>          save_section_header(f, se, QEMU_VM_SECTION_END);
+>
+>>
+>
+>>          ret = se->ops->save_live_complete_precopy(f, se->opaque);
+>
+>>+
+>
+>>+        fprintf(stderr, "after saving %s complete\n", se->idstr);
+>
+>>+        check_host_md5();
+>
+>>+
+>
+>>          trace_savevm_section_end(se->idstr, se->section_id, ret);
+>
+>>          save_section_footer(f, se);
+>
+>>          if (ret < 0) {
+>
+>>@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+>
+>>MigrationIncomingState *mis)
+>
+>>                               section_id, le->se->idstr);
+>
+>>                  return ret;
+>
+>>              }
+>
+>>+            if (section_type == QEMU_VM_SECTION_END) {
+>
+>>+                error_report("after loading state section id %d(%s)",
+>
+>>+                             section_id, le->se->idstr);
+>
+>>+                check_host_md5();
+>
+>>+            }
+>
+>>              if (!check_section_footer(f, le)) {
+>
+>>                  return -EINVAL;
+>
+>>              }
+>
+>>@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+>
+>>      }
+>
+>>
+>
+>>      cpu_synchronize_all_post_init();
+>
+>>+    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
+>
+>>+    check_host_md5();
+>
+>>
+>
+>>      return ret;
+>
+>>  }
+>
+>>
+>
+>>
+>
+>>
+>
+>--
+>
+>Dr. David Alan Gilbert / address@hidden / Manchester, UK
+>
+>
+>
+>
+>
+>.
+>
+>
+>
+>
+--
+>
+Best regards.
+>
+Li Zhijian (8555)
+>
+>
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+Li Zhijian <address@hidden> wrote:
+>
+Hi all,
+>
+>
+Does anyboday remember the similar issue post by hailiang months ago
+>
+http://patchwork.ozlabs.org/patch/454322/
+>
+At least tow bugs about migration had been fixed since that.
+>
+>
+And now we found the same issue at the tcg vm(kvm is fine), after
+>
+migration, the content VM's memory is inconsistent.
+>
+>
+we add a patch to check memory content, you can find it from affix
+>
+>
+steps to reporduce:
+>
+1) apply the patch and re-build qemu
+>
+2) prepare the ubuntu guest and run memtest in grub.
+>
+soruce side:
+>
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+pc-i440fx-2.3,accel=tcg,usb=off
+>
+>
+destination side:
+>
+x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device
+>
+e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive
+>
+if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device
+>
+virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
+>
+-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp
+>
+tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine
+>
+pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881
+>
+>
+3) start migration
+>
+with 1000M NIC, migration will finish within 3 min.
+>
+>
+at source:
+>
+(qemu) migrate tcp:192.168.2.66:8881
+>
+after saving ram complete
+>
+e9e725df678d392b1a83b3a917f332bb
+>
+qemu-system-x86_64: end ram md5
+>
+(qemu)
+>
+>
+at destination:
+>
+...skip...
+>
+Completed load of VM with exit code 0 seq iteration 1264
+>
+Completed load of VM with exit code 0 seq iteration 1265
+>
+Completed load of VM with exit code 0 seq iteration 1266
+>
+qemu-system-x86_64: after loading state section id 2(ram)
+>
+49c2dac7bde0e5e22db7280dcb3824f9
+>
+qemu-system-x86_64: end ram md5
+>
+qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init
+>
+>
+49c2dac7bde0e5e22db7280dcb3824f9
+>
+qemu-system-x86_64: end ram md5
+>
+>
+This occurs occasionally and only at tcg machine. It seems that
+>
+some pages dirtied in source side don't transferred to destination.
+>
+This problem can be reproduced even if we disable virtio.
+>
+>
+Is it OK for some pages that not transferred to destination when do
+>
+migration ? Or is it a bug?
+>
+>
+Any idea...
+Thanks for describing how to reproduce the bug.
+If some pages are not transferred to destination then it is a bug, so we
+need to know what the problem is, notice that the problem can be that
+TCG is not marking dirty some page, that Migration code "forgets" about
+that page, or anything eles altogether, that is what we need to find.
+
+There are more posibilities, I am not sure that memtest is on 32bit
+mode, and it is inside posibility that we are missing some state when we
+are on real mode.
+
+Will try to take a look at this.
+
+THanks, again.
+
+
+>
+>
+=================md5 check patch=============================
+>
+>
+diff --git a/Makefile.target b/Makefile.target
+>
+index 962d004..e2cb8e9 100644
+>
+--- a/Makefile.target
+>
++++ b/Makefile.target
+>
+@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o
+>
+obj-y += memory_mapping.o
+>
+obj-y += dump.o
+>
+obj-y += migration/ram.o migration/savevm.o
+>
+-LIBS := $(libs_softmmu) $(LIBS)
+>
++LIBS := $(libs_softmmu) $(LIBS) -lplumb
+>
+>
+# xen support
+>
+obj-$(CONFIG_XEN) += xen-common.o
+>
+diff --git a/migration/ram.c b/migration/ram.c
+>
+index 1eb155a..3b7a09d 100644
+>
+--- a/migration/ram.c
+>
++++ b/migration/ram.c
+>
+@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque,
+>
+int version_id)
+>
+}
+>
+>
+rcu_read_unlock();
+>
+-    DPRINTF("Completed load of VM with exit code %d seq iteration "
+>
++    fprintf(stderr, "Completed load of VM with exit code %d seq iteration "
+>
+"%" PRIu64 "\n", ret, seq_iter);
+>
+return ret;
+>
+}
+>
+diff --git a/migration/savevm.c b/migration/savevm.c
+>
+index 0ad1b93..3feaa61 100644
+>
+--- a/migration/savevm.c
+>
++++ b/migration/savevm.c
+>
+@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f)
+>
+>
+}
+>
+>
++#include "exec/ram_addr.h"
+>
++#include "qemu/rcu_queue.h"
+>
++#include <clplumbing/md5.h>
+>
++#ifndef MD5_DIGEST_LENGTH
+>
++#define MD5_DIGEST_LENGTH 16
+>
++#endif
+>
++
+>
++static void check_host_md5(void)
+>
++{
+>
++    int i;
+>
++    unsigned char md[MD5_DIGEST_LENGTH];
+>
++    rcu_read_lock();
+>
++    RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check
+>
+'pc.ram' block */
+>
++    rcu_read_unlock();
+>
++
+>
++    MD5(block->host, block->used_length, md);
+>
++    for(i = 0; i < MD5_DIGEST_LENGTH; i++) {
+>
++        fprintf(stderr, "%02x", md[i]);
+>
++    }
+>
++    fprintf(stderr, "\n");
+>
++    error_report("end ram md5");
+>
++}
+>
++
+>
+void qemu_savevm_state_begin(QEMUFile *f,
+>
+const MigrationParams *params)
+>
+{
+>
+@@ -1056,6 +1079,10 @@ void
+>
+qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only)
+>
+save_section_header(f, se, QEMU_VM_SECTION_END);
+>
+>
+ret = se->ops->save_live_complete_precopy(f, se->opaque);
+>
++
+>
++        fprintf(stderr, "after saving %s complete\n", se->idstr);
+>
++        check_host_md5();
+>
++
+>
+trace_savevm_section_end(se->idstr, se->section_id, ret);
+>
+save_section_footer(f, se);
+>
+if (ret < 0) {
+>
+@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f,
+>
+MigrationIncomingState *mis)
+>
+section_id, le->se->idstr);
+>
+return ret;
+>
+}
+>
++            if (section_type == QEMU_VM_SECTION_END) {
+>
++                error_report("after loading state section id %d(%s)",
+>
++                             section_id, le->se->idstr);
+>
++                check_host_md5();
+>
++            }
+>
+if (!check_section_footer(f, le)) {
+>
+return -EINVAL;
+>
+}
+>
+@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f)
+>
+}
+>
+>
+cpu_synchronize_all_post_init();
+>
++    error_report("%s: after cpu_synchronize_all_post_init\n", __func__);
+>
++    check_host_md5();
+>
+>
+return ret;
+>
+}
+
+>
+>
+Thanks for describing how to reproduce the bug.
+>
+If some pages are not transferred to destination then it is a bug, so we need
+>
+to know what the problem is, notice that the problem can be that TCG is not
+>
+marking dirty some page, that Migration code "forgets" about that page, or
+>
+anything eles altogether, that is what we need to find.
+>
+>
+There are more posibilities, I am not sure that memtest is on 32bit mode, and
+>
+it is inside posibility that we are missing some state when we are on real
+>
+mode.
+>
+>
+Will try to take a look at this.
+>
+>
+THanks, again.
+>
+Hi Juan & Amit
+
+ Do you think we should add a mechanism to check the data integrity during LM 
+like Zhijian's patch did?  it may be very helpful for developers. 
+ Actually, I did the similar thing before in order to make sure that I did the 
+right thing we I change the code related to LM.
+
+Liang
+
+On (Fri) 04 Dec 2015 [01:43:07], Li, Liang Z wrote:
+>
+>
+>
+> Thanks for describing how to reproduce the bug.
+>
+> If some pages are not transferred to destination then it is a bug, so we
+>
+> need
+>
+> to know what the problem is, notice that the problem can be that TCG is not
+>
+> marking dirty some page, that Migration code "forgets" about that page, or
+>
+> anything eles altogether, that is what we need to find.
+>
+>
+>
+> There are more posibilities, I am not sure that memtest is on 32bit mode,
+>
+> and
+>
+> it is inside posibility that we are missing some state when we are on real
+>
+> mode.
+>
+>
+>
+> Will try to take a look at this.
+>
+>
+>
+> THanks, again.
+>
+>
+>
+>
+Hi Juan & Amit
+>
+>
+Do you think we should add a mechanism to check the data integrity during LM
+>
+like Zhijian's patch did?  it may be very helpful for developers.
+>
+Actually, I did the similar thing before in order to make sure that I did
+>
+the right thing we I change the code related to LM.
+If you mean for debugging, something that's not always on, then I'm
+fine with it.
+
+A script that goes along that shows the result of comparison of the
+diff will be helpful too, something that shows how many pages are
+differnt, how many bytes in a page on average, and so on.
+
+                Amit
+
diff --git a/results/classifier/zero-shot/010/review/74545755 b/results/classifier/zero-shot/010/review/74545755
new file mode 100644
index 00000000..64bf30f3
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/74545755
@@ -0,0 +1,368 @@
+permissions: 0.770
+debug: 0.740
+performance: 0.721
+device: 0.720
+other: 0.683
+semantic: 0.669
+KVM: 0.661
+graphic: 0.660
+vnc: 0.650
+boot: 0.607
+files: 0.577
+network: 0.550
+socket: 0.549
+PID: 0.479
+debug: 0.973
+PID: 0.132
+files: 0.051
+KVM: 0.014
+other: 0.014
+performance: 0.009
+semantic: 0.009
+device: 0.006
+network: 0.004
+socket: 0.002
+graphic: 0.001
+vnc: 0.001
+permissions: 0.001
+boot: 0.001
+
+[Bug Report][RFC PATCH 0/1] block: fix failing assert on paused VM migration
+
+There's a bug (failing assert) which is reproduced during migration of
+a paused VM.  I am able to reproduce it on a stand with 2 nodes and a common
+NFS share, with VM's disk on that share.
+
+root@fedora40-1-vm:~# virsh domblklist alma8-vm
+ Target   Source
+------------------------------------------
+ sda      /mnt/shared/images/alma8.qcow2
+
+root@fedora40-1-vm:~# df -Th /mnt/shared
+Filesystem          Type  Size  Used Avail Use% Mounted on
+127.0.0.1:/srv/nfsd nfs4   63G   16G   48G  25% /mnt/shared
+
+On the 1st node:
+
+root@fedora40-1-vm:~# virsh start alma8-vm ; virsh suspend alma8-vm
+root@fedora40-1-vm:~# virsh migrate --compressed --p2p --persistent 
+--undefinesource --live alma8-vm qemu+ssh://fedora40-2-vm/system
+
+Then on the 2nd node:
+
+root@fedora40-2-vm:~# virsh migrate --compressed --p2p --persistent 
+--undefinesource --live alma8-vm qemu+ssh://fedora40-1-vm/system
+error: operation failed: domain is not running
+
+root@fedora40-2-vm:~# tail -3 /var/log/libvirt/qemu/alma8-vm.log
+2024-09-19 13:53:33.336+0000: initiating migration
+qemu-system-x86_64: ../block.c:6976: int 
+bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & 
+BDRV_O_INACTIVE)' failed.
+2024-09-19 13:53:42.991+0000: shutting down, reason=crashed
+
+Backtrace:
+
+(gdb) bt
+#0  0x00007f7eaa2f1664 in __pthread_kill_implementation () at /lib64/libc.so.6
+#1  0x00007f7eaa298c4e in raise () at /lib64/libc.so.6
+#2  0x00007f7eaa280902 in abort () at /lib64/libc.so.6
+#3  0x00007f7eaa28081e in __assert_fail_base.cold () at /lib64/libc.so.6
+#4  0x00007f7eaa290d87 in __assert_fail () at /lib64/libc.so.6
+#5  0x0000563c38b95eb8 in bdrv_inactivate_recurse (bs=0x563c3b6c60c0) at 
+../block.c:6976
+#6  0x0000563c38b95aeb in bdrv_inactivate_all () at ../block.c:7038
+#7  0x0000563c3884d354 in qemu_savevm_state_complete_precopy_non_iterable 
+(f=0x563c3b700c20, in_postcopy=false, inactivate_disks=true)
+    at ../migration/savevm.c:1571
+#8  0x0000563c3884dc1a in qemu_savevm_state_complete_precopy (f=0x563c3b700c20, 
+iterable_only=false, inactivate_disks=true) at ../migration/savevm.c:1631
+#9  0x0000563c3883a340 in migration_completion_precopy (s=0x563c3b4d51f0, 
+current_active_state=<optimized out>) at ../migration/migration.c:2780
+#10 migration_completion (s=0x563c3b4d51f0) at ../migration/migration.c:2844
+#11 migration_iteration_run (s=0x563c3b4d51f0) at ../migration/migration.c:3270
+#12 migration_thread (opaque=0x563c3b4d51f0) at ../migration/migration.c:3536
+#13 0x0000563c38dbcf14 in qemu_thread_start (args=0x563c3c2d5bf0) at 
+../util/qemu-thread-posix.c:541
+#14 0x00007f7eaa2ef6d7 in start_thread () at /lib64/libc.so.6
+#15 0x00007f7eaa373414 in clone () at /lib64/libc.so.6
+
+What happens here is that after 1st migration BDS related to HDD remains
+inactive as VM is still paused.  Then when we initiate 2nd migration,
+bdrv_inactivate_all() leads to the attempt to set BDRV_O_INACTIVE flag
+on that node which is already set, thus assert fails.
+
+Attached patch which simply skips setting flag if it's already set is more
+of a kludge than a clean solution.  Should we use more sophisticated logic
+which allows some of the nodes be in inactive state prior to the migration,
+and takes them into account during bdrv_inactivate_all()?  Comments would
+be appreciated.
+
+Andrey
+
+Andrey Drobyshev (1):
+  block: do not fail when inactivating node which is inactive
+
+ block.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+-- 
+2.39.3
+
+Instead of throwing an assert let's just ignore that flag is already set
+and return.  We assume that it's going to be safe to ignore.  Otherwise
+this assert fails when migrating a paused VM back and forth.
+
+Ideally we'd like to have a more sophisticated solution, e.g. not even
+scan the nodes which should be inactive at this point.
+
+Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
+---
+ block.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/block.c b/block.c
+index 7d90007cae..c1dcf906d1 100644
+--- a/block.c
++++ b/block.c
+@@ -6973,7 +6973,15 @@ static int GRAPH_RDLOCK 
+bdrv_inactivate_recurse(BlockDriverState *bs)
+         return 0;
+     }
+ 
+-    assert(!(bs->open_flags & BDRV_O_INACTIVE));
++    if (bs->open_flags & BDRV_O_INACTIVE) {
++        /*
++         * Return here instead of throwing assert as a workaround to
++         * prevent failure on migrating paused VM.
++         * Here we assume that if we're trying to inactivate BDS that's
++         * already inactive, it's safe to just ignore it.
++         */
++        return 0;
++    }
+ 
+     /* Inactivate this node */
+     if (bs->drv->bdrv_inactivate) {
+-- 
+2.39.3
+
+[add migration maintainers]
+
+On 24.09.24 15:56, Andrey Drobyshev wrote:
+Instead of throwing an assert let's just ignore that flag is already set
+and return.  We assume that it's going to be safe to ignore.  Otherwise
+this assert fails when migrating a paused VM back and forth.
+
+Ideally we'd like to have a more sophisticated solution, e.g. not even
+scan the nodes which should be inactive at this point.
+
+Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
+---
+  block.c | 10 +++++++++-
+  1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/block.c b/block.c
+index 7d90007cae..c1dcf906d1 100644
+--- a/block.c
++++ b/block.c
+@@ -6973,7 +6973,15 @@ static int GRAPH_RDLOCK 
+bdrv_inactivate_recurse(BlockDriverState *bs)
+          return 0;
+      }
+-    assert(!(bs->open_flags & BDRV_O_INACTIVE));
++    if (bs->open_flags & BDRV_O_INACTIVE) {
++        /*
++         * Return here instead of throwing assert as a workaround to
++         * prevent failure on migrating paused VM.
++         * Here we assume that if we're trying to inactivate BDS that's
++         * already inactive, it's safe to just ignore it.
++         */
++        return 0;
++    }
+/* Inactivate this node */
+if (bs->drv->bdrv_inactivate) {
+I doubt that this a correct way to go.
+
+As far as I understand, "inactive" actually means that "storage is not belong to 
+qemu, but to someone else (another qemu process for example), and may be changed 
+transparently". In turn this means that Qemu should do nothing with inactive disks. So the 
+problem is that nobody called bdrv_activate_all on target, and we shouldn't ignore that.
+
+Hmm, I see in process_incoming_migration_bh() we do call bdrv_activate_all(), 
+but only in some scenarios. May be, the condition should be less strict here.
+
+Why we need any condition here at all? Don't we want to activate block-layer on 
+target after migration anyway?
+
+--
+Best regards,
+Vladimir
+
+On 9/30/24 12:25 PM, Vladimir Sementsov-Ogievskiy wrote:
+>
+[add migration maintainers]
+>
+>
+On 24.09.24 15:56, Andrey Drobyshev wrote:
+>
+> [...]
+>
+>
+I doubt that this a correct way to go.
+>
+>
+As far as I understand, "inactive" actually means that "storage is not
+>
+belong to qemu, but to someone else (another qemu process for example),
+>
+and may be changed transparently". In turn this means that Qemu should
+>
+do nothing with inactive disks. So the problem is that nobody called
+>
+bdrv_activate_all on target, and we shouldn't ignore that.
+>
+>
+Hmm, I see in process_incoming_migration_bh() we do call
+>
+bdrv_activate_all(), but only in some scenarios. May be, the condition
+>
+should be less strict here.
+>
+>
+Why we need any condition here at all? Don't we want to activate
+>
+block-layer on target after migration anyway?
+>
+Hmm I'm not sure about the unconditional activation, since we at least
+have to honor LATE_BLOCK_ACTIVATE cap if it's set (and probably delay it
+in such a case).  In current libvirt upstream I see such code:
+
+>
+/* Migration capabilities which should always be enabled as long as they
+>
+>
+* are supported by QEMU. If the capability is supposed to be enabled on both
+>
+>
+* sides of migration, it won't be enabled unless both sides support it.
+>
+>
+*/
+>
+>
+static const qemuMigrationParamsAlwaysOnItem qemuMigrationParamsAlwaysOn[] =
+>
+{
+>
+>
+{QEMU_MIGRATION_CAP_PAUSE_BEFORE_SWITCHOVER,
+>
+>
+QEMU_MIGRATION_SOURCE},
+>
+>
+>
+>
+{QEMU_MIGRATION_CAP_LATE_BLOCK_ACTIVATE,
+>
+>
+QEMU_MIGRATION_DESTINATION},
+>
+>
+};
+which means that libvirt always wants LATE_BLOCK_ACTIVATE to be set.
+
+The code from process_incoming_migration_bh() you're referring to:
+
+>
+/* If capability late_block_activate is set:
+>
+>
+* Only fire up the block code now if we're going to restart the
+>
+>
+* VM, else 'cont' will do it.
+>
+>
+* This causes file locking to happen; so we don't want it to happen
+>
+>
+* unless we really are starting the VM.
+>
+>
+*/
+>
+>
+if (!migrate_late_block_activate() ||
+>
+>
+(autostart && (!global_state_received() ||
+>
+>
+runstate_is_live(global_state_get_runstate())))) {
+>
+>
+/* Make sure all file formats throw away their mutable metadata.
+>
+>
+>
+* If we get an error here, just don't restart the VM yet. */
+>
+>
+bdrv_activate_all(&local_err);
+>
+>
+if (local_err) {
+>
+>
+error_report_err(local_err);
+>
+>
+local_err = NULL;
+>
+>
+autostart = false;
+>
+>
+}
+>
+>
+}
+It states explicitly that we're either going to start VM right at this
+point if (autostart == true), or we wait till "cont" command happens.
+None of this is going to happen if we start another migration while
+still being in PAUSED state.  So I think it seems reasonable to take
+such case into account.  For instance, this patch does prevent the crash:
+
+>
+diff --git a/migration/migration.c b/migration/migration.c
+>
+index ae2be31557..3222f6745b 100644
+>
+--- a/migration/migration.c
+>
++++ b/migration/migration.c
+>
+@@ -733,7 +733,8 @@ static void process_incoming_migration_bh(void *opaque)
+>
+*/
+>
+if (!migrate_late_block_activate() ||
+>
+(autostart && (!global_state_received() ||
+>
+-            runstate_is_live(global_state_get_runstate())))) {
+>
++            runstate_is_live(global_state_get_runstate()))) ||
+>
++         (!autostart && global_state_get_runstate() == RUN_STATE_PAUSED)) {
+>
+/* Make sure all file formats throw away their mutable metadata.
+>
+* If we get an error here, just don't restart the VM yet. */
+>
+bdrv_activate_all(&local_err);
+What are your thoughts on it?
+
+Andrey
+
diff --git a/results/classifier/zero-shot/010/review/74715356 b/results/classifier/zero-shot/010/review/74715356
new file mode 100644
index 00000000..d30d98ba
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/74715356
@@ -0,0 +1,150 @@
+permissions: 0.930
+other: 0.927
+semantic: 0.916
+debug: 0.907
+performance: 0.905
+device: 0.900
+PID: 0.897
+graphic: 0.894
+boot: 0.881
+KVM: 0.863
+vnc: 0.850
+files: 0.850
+socket: 0.843
+network: 0.838
+debug: 0.452
+files: 0.212
+semantic: 0.072
+other: 0.037
+KVM: 0.035
+performance: 0.024
+PID: 0.019
+boot: 0.008
+socket: 0.007
+device: 0.005
+network: 0.005
+vnc: 0.004
+graphic: 0.002
+permissions: 0.001
+
+[Bug] x86 EFLAGS refresh is not happening correctly
+
+Hello,
+I'm posting this here instead of opening an issue as it is not clear to me if this is a bug or not.
+The issue is located in function "cpu_compute_eflags" in target/i386/cpu.h
+(
+https://gitlab.com/qemu-project/qemu/-/blob/master/target/i386/cpu.h#L2071
+)
+This function is exectued in an out of cpu loop context.
+It is used to synchronize TCG internal eflags registers (CC_OP, CC_SRC,  etc...) with the CPU eflags field upon loop exit.
+It does:
+    eflags
+|=
+cpu_cc_compute_all
+(
+env
+,
+CC_OP
+)
+|
+(
+env
+->
+df
+&
+DF_MASK
+);
+Shouldn't it be:
+    Â
+eflags
+=
+cpu_cc_compute_all
+(
+env
+,
+CC_OP
+)
+|
+(
+env
+->
+df
+&
+DF_MASK
+);
+as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
+Thanks,
+Kind regards,
+Stevie
+
+On 05/08/21 11:51, Stevie Lavern wrote:
+Shouldn't it be:
+eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
+as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
+No, both are wrong.  env->eflags contains flags other than the
+arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
+The right code is in helper_read_eflags.  You can move it into
+cpu_compute_eflags, and make helper_read_eflags use it.
+Paolo
+
+On 05/08/21 13:24, Paolo Bonzini wrote:
+On 05/08/21 11:51, Stevie Lavern wrote:
+Shouldn't it be:
+eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
+as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
+No, both are wrong.  env->eflags contains flags other than the
+arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
+The right code is in helper_read_eflags.  You can move it into
+cpu_compute_eflags, and make helper_read_eflags use it.
+Ah, actually the two are really the same, the TF/VM bits do not apply to
+cpu_compute_eflags so it's correct.
+What seems wrong is migration of the EFLAGS register.  There should be
+code in cpu_pre_save and cpu_post_load to special-case it and setup
+CC_DST/CC_OP as done in cpu_load_eflags.
+Also, cpu_load_eflags should assert that update_mask does not include
+any of the arithmetic flags.
+Paolo
+
+Thank for your reply!
+It's still a bit cryptic for me.
+I think i need to precise that I'm using a x86_64 custom user-mode,base on linux user-mode, that i'm developing (unfortunately i cannot share the code) with modifications in the translation loop (I've added cpu loop exits on specific instructions which are not control flow instructions).
+If my understanding is correct, in the user-mode case 'cpu_compute_eflags' is called directly by 'x86_cpu_exec_exit' with the intention of synchronizing the CPU env->eflags field with its real value (represented by the CC_* fields).
+I'm not sure how 'cpu_pre_save' and 'cpu_post_load' are involved in this case.
+Â
+As you said in your first email, 'helper_read_eflags' seems to be the correct way to go.
+Here is some detail about my current experimentation/understanding of this "issue":
+With the current implementationÂ
+        Â
+eflags |= cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
+if I exit the loop with a CC_OP different from CC_OP_EFLAGS, I found that the resulting env->eflags may be invalid.
+In my test case, the loop was exiting with eflags = 0x44 and CC_OP = CC_OP_SUBL with CC_DST=1, CC_SRC=258, CC_SRC2=0.
+While 'cpu_cc_compute_all' computes the correct flags (ZF:0, PF:0), the result will still be 0x44 (ZF:1, PF:1) due to the 'or' operation, thus leading to an incorrect eflags value loaded into the CPU env.Â
+In my case, after loop reentry, it led to an invalid branch to be taken.
+Thanks for your time!
+Regards
+Stevie
+Â
+On Thu, Aug 5, 2021 at 1:33 PM Paolo Bonzini <
+pbonzini@redhat.com
+> wrote:
+On 05/08/21 13:24, Paolo Bonzini wrote:
+> On 05/08/21 11:51, Stevie Lavern wrote:
+>>
+>> Shouldn't it be:
+>> eflags = cpu_cc_compute_all(env, CC_OP) | (env->df & DF_MASK);
+>> as eflags is entirely reevaluated by "cpu_cc_compute_all" ?
+>
+> No, both are wrong.  env->eflags contains flags other than the
+> arithmetic flags (OF/SF/ZF/AF/PF/CF) and those have to be preserved.
+>
+> The right code is in helper_read_eflags.  You can move it into
+> cpu_compute_eflags, and make helper_read_eflags use it.
+Ah, actually the two are really the same, the TF/VM bits do not apply to
+cpu_compute_eflags so it's correct.
+What seems wrong is migration of the EFLAGS register.  There should be
+code in cpu_pre_save and cpu_post_load to special-case it and setup
+CC_DST/CC_OP as done in cpu_load_eflags.
+Also, cpu_load_eflags should assert that update_mask does not include
+any of the arithmetic flags.
+Paolo
+
diff --git a/results/classifier/zero-shot/010/review/79834768 b/results/classifier/zero-shot/010/review/79834768
new file mode 100644
index 00000000..2f079edb
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/79834768
@@ -0,0 +1,433 @@
+performance: 0.952
+debug: 0.943
+other: 0.943
+permissions: 0.939
+graphic: 0.933
+semantic: 0.920
+PID: 0.916
+device: 0.915
+socket: 0.912
+files: 0.904
+vnc: 0.885
+boot: 0.880
+KVM: 0.840
+network: 0.830
+KVM: 0.958
+debug: 0.901
+performance: 0.042
+files: 0.016
+PID: 0.010
+device: 0.009
+socket: 0.008
+semantic: 0.008
+other: 0.007
+vnc: 0.006
+graphic: 0.003
+permissions: 0.003
+network: 0.003
+boot: 0.002
+
+[Qemu-devel] [BUG] Windows 7 got stuck easily while run PCMark10 application
+
+Hi，
+
+We hit a bug in our test while run PCMark 10 in a windows 7 VM,
+The VM got stuck and the wallclock was hang after several minutes running
+PCMark 10 in it.
+It is quite easily to reproduce the bug with the upstream KVM and Qemu.
+
+We found that KVM can not inject any RTC irq to VM after it was hang, it fails 
+to
+Deliver irq in ioapic_set_irq() because RTC irq is still pending in ioapic->irr.
+
+static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
+                  int irq_level, bool line_status)
+{
+… …
+         if (!irq_level) {
+                  ioapic->irr &= ~mask;
+                  ret = 1;
+                  goto out;
+         }
+… …
+         if ((edge && old_irr == ioapic->irr) ||
+             (!edge && entry.fields.remote_irr)) {
+                  ret = 0;
+                  goto out;
+         }
+
+According to RTC spec, after RTC injects a High level irq, OS will read CMOS’s
+register C to to clear the irq flag, and pull down the irq electric pin.
+
+For Qemu, we will emulate the reading operation in cmos_ioport_read(),
+but Guest OS will fire a write operation before to tell which register will be 
+read
+after this write, where we use s->cmos_index to record the following register 
+to read.
+
+But in our test, we found that there is a possible situation that Vcpu fails to 
+read
+RTC_REG_C to clear irq, This could happens while two VCpus are writing/reading
+registers at the same time, for example, vcpu 0 is trying to read RTC_REG_C,
+so it write RTC_REG_C first, where the s->cmos_index will be RTC_REG_C,
+but before it tries to read register C, another vcpu1 is going to read RTC_YEAR,
+it changes s->cmos_index to RTC_YEAR by a writing action.
+The next operation of vcpu0 will be lead to read RTC_YEAR, In this case, we 
+will miss
+calling qemu_irq_lower(s->irq) to clear the irq. After this, kvm will never 
+inject RTC irq,
+and Windows VM will hang.
+static void cmos_ioport_write(void *opaque, hwaddr addr,
+                              uint64_t data, unsigned size)
+{
+    RTCState *s = opaque;
+
+    if ((addr & 1) == 0) {
+        s->cmos_index = data & 0x7f;
+    }
+……
+static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
+                                 unsigned size)
+{
+    RTCState *s = opaque;
+    int ret;
+    if ((addr & 1) == 0) {
+        return 0xff;
+    } else {
+        switch(s->cmos_index) {
+
+According to CMOS spec, ‘any write to PROT 0070h should be followed by an 
+action to PROT 0071h or the RTC
+Will be RTC will be left in an unknown state’, but it seems that we can not 
+ensure this sequence in qemu/kvm.
+
+Any ideas ?
+
+Thanks,
+Hailiang
+
+Pls see the trace of kvm_pio:
+
+       CPU 1/KVM-15567 [003] .... 209311.762579: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762582: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x89
+       CPU 1/KVM-15567 [003] .... 209311.762590: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x17
+       CPU 0/KVM-15566 [005] .... 209311.762611: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0xc
+       CPU 1/KVM-15567 [003] .... 209311.762615: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762619: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x88
+       CPU 1/KVM-15567 [003] .... 209311.762627: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x12
+       CPU 0/KVM-15566 [005] .... 209311.762632: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x12
+       CPU 1/KVM-15567 [003] .... 209311.762633: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 0/KVM-15566 [005] .... 209311.762634: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0xc           <--- Firstly write to 0x70, cmo_index = 0xc & 
+0x7f = 0xc
+       CPU 1/KVM-15567 [003] .... 209311.762636: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x86       <-- Secondly write to 0x70, cmo_index = 0x86 & 
+0x7f = 0x6, cover the cmo_index result of first time
+       CPU 0/KVM-15566 [005] .... 209311.762641: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x6      <--  vcpu0 read 0x6 because cmo_index is 0x6 now
+       CPU 1/KVM-15567 [003] .... 209311.762644: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x6     <-  vcpu1 read 0x6
+       CPU 1/KVM-15567 [003] .... 209311.762649: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762669: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x87
+       CPU 1/KVM-15567 [003] .... 209311.762678: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x1
+       CPU 1/KVM-15567 [003] .... 209311.762683: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762686: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x84
+       CPU 1/KVM-15567 [003] .... 209311.762693: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x10
+       CPU 1/KVM-15567 [003] .... 209311.762699: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762702: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x82
+       CPU 1/KVM-15567 [003] .... 209311.762709: kvm_pio: pio_read at 0x71 size 
+1 count 1 val 0x25
+       CPU 1/KVM-15567 [003] .... 209311.762714: kvm_pio: pio_read at 0x70 size 
+1 count 1 val 0xff
+       CPU 1/KVM-15567 [003] .... 209311.762717: kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x80
+
+
+Regards,
+-Gonglei
+
+From: Zhanghailiang
+Sent: Friday, December 01, 2017 3:03 AM
+To: address@hidden; address@hidden; Paolo Bonzini
+Cc: Huangweidong (C); Gonglei (Arei); wangxin (U); Xiexiangyou
+Subject: [BUG] Windows 7 got stuck easily while run PCMark10 application
+
+Hi，
+
+We hit a bug in our test while run PCMark 10 in a windows 7 VM,
+The VM got stuck and the wallclock was hang after several minutes running
+PCMark 10 in it.
+It is quite easily to reproduce the bug with the upstream KVM and Qemu.
+
+We found that KVM can not inject any RTC irq to VM after it was hang, it fails 
+to
+Deliver irq in ioapic_set_irq() because RTC irq is still pending in ioapic->irr.
+
+static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
+                  int irq_level, bool line_status)
+{
+… …
+         if (!irq_level) {
+                  ioapic->irr &= ~mask;
+                  ret = 1;
+                  goto out;
+         }
+… …
+         if ((edge && old_irr == ioapic->irr) ||
+             (!edge && entry.fields.remote_irr)) {
+                  ret = 0;
+                  goto out;
+         }
+
+According to RTC spec, after RTC injects a High level irq, OS will read CMOS’s
+register C to to clear the irq flag, and pull down the irq electric pin.
+
+For Qemu, we will emulate the reading operation in cmos_ioport_read(),
+but Guest OS will fire a write operation before to tell which register will be 
+read
+after this write, where we use s->cmos_index to record the following register 
+to read.
+
+But in our test, we found that there is a possible situation that Vcpu fails to 
+read
+RTC_REG_C to clear irq, This could happens while two VCpus are writing/reading
+registers at the same time, for example, vcpu 0 is trying to read RTC_REG_C,
+so it write RTC_REG_C first, where the s->cmos_index will be RTC_REG_C,
+but before it tries to read register C, another vcpu1 is going to read RTC_YEAR,
+it changes s->cmos_index to RTC_YEAR by a writing action.
+The next operation of vcpu0 will be lead to read RTC_YEAR, In this case, we 
+will miss
+calling qemu_irq_lower(s->irq) to clear the irq. After this, kvm will never 
+inject RTC irq,
+and Windows VM will hang.
+static void cmos_ioport_write(void *opaque, hwaddr addr,
+                              uint64_t data, unsigned size)
+{
+    RTCState *s = opaque;
+
+    if ((addr & 1) == 0) {
+        s->cmos_index = data & 0x7f;
+    }
+……
+static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
+                                 unsigned size)
+{
+    RTCState *s = opaque;
+    int ret;
+    if ((addr & 1) == 0) {
+        return 0xff;
+    } else {
+        switch(s->cmos_index) {
+
+According to CMOS spec, ‘any write to PROT 0070h should be followed by an 
+action to PROT 0071h or the RTC
+Will be RTC will be left in an unknown state’, but it seems that we can not 
+ensure this sequence in qemu/kvm.
+
+Any ideas ?
+
+Thanks,
+Hailiang
+
+On 01/12/2017 08:08, Gonglei (Arei) wrote:
+>
+First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
+>
+       CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
+>
+Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
+>
+kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
+>
+cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71 size
+>
+1 count 1 val 0x6> vcpu1 read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read
+>
+at 0x71 size 1 count 1 val 0x6
+This seems to be a Windows bug.  The easiest workaround that I
+can think of is to clear the interrupts already when 0xc is written,
+without waiting for the read (because REG_C can only be read).
+
+What do you think?
+
+Thanks,
+
+Paolo
+
+I also think it's windows bug, the problem is that it doesn't occur on xen 
+platform. And there are some other works need to be done while reading REG_C. 
+So I wrote that patch.
+
+Thanks,
+Gonglei
+发件人：Paolo Bonzini
+收件人：龚磊,张海亮,qemu-devel,Michael S. Tsirkin
+抄送：黄伟栋,王欣,谢祥有
+时间：2017-12-02 01:10:08
+主题:Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
+
+On 01/12/2017 08:08, Gonglei (Arei) wrote:
+>
+First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
+>
+CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
+>
+Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
+>
+kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
+>
+cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71 size
+>
+1 count 1 val 0x6> vcpu1 read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read
+>
+at 0x71 size 1 count 1 val 0x6
+This seems to be a Windows bug.  The easiest workaround that I
+can think of is to clear the interrupts already when 0xc is written,
+without waiting for the read (because REG_C can only be read).
+
+What do you think?
+
+Thanks,
+
+Paolo
+
+On 01/12/2017 18:45, Gonglei (Arei) wrote:
+>
+I also think it's windows bug, the problem is that it doesn't occur on
+>
+xen platform.
+It's a race, it may just be that RTC PIO is faster in Xen because it's
+implemented in the hypervisor.
+
+I will try reporting it to Microsoft.
+
+Thanks,
+
+Paolo
+
+>
+Thanks,
+>
+Gonglei
+>
+*发件人：*Paolo Bonzini
+>
+*收件人：*龚磊,张海亮,qemu-devel,Michael S. Tsirkin
+>
+*抄送：*黄伟栋,王欣,谢祥有
+>
+*时间：*2017-12-02 01:10:08
+>
+*主题:*Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
+>
+>
+On 01/12/2017 08:08, Gonglei (Arei) wrote:
+>
+> First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
+>
+>        CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc>
+>
+> Second write to 0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567
+>
+> kvm_pio: pio_write at 0x70 size 1 count 1 val 0x86> vcpu0 read 0x6 because
+>
+> cmos_index is 0x6 now:>        CPU 0/KVM-15566 kvm_pio: pio_read at 0x71
+>
+> size 1 count 1 val 0x6> vcpu1
+>
+read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read at 0x71 size 1 count
+>
+1 val 0x6
+>
+This seems to be a Windows bug.  The easiest workaround that I
+>
+can think of is to clear the interrupts already when 0xc is written,
+>
+without waiting for the read (because REG_C can only be read).
+>
+>
+What do you think?
+>
+>
+Thanks,
+>
+>
+Paolo
+
+On 2017/12/2 2:37, Paolo Bonzini wrote:
+On 01/12/2017 18:45, Gonglei (Arei) wrote:
+I also think it's windows bug, the problem is that it doesn't occur on
+xen platform.
+It's a race, it may just be that RTC PIO is faster in Xen because it's
+implemented in the hypervisor.
+No, In Xen, it does not has such problem because it injects the RTC irq without
+checking whether its previous irq been cleared or not, which we do has such 
+checking
+in KVM.
+
+static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
+        int irq_level, bool line_status)
+{
+   ... ...
+    if (!irq_level) {
+        ioapic->irr &= ~mask; -->clear the RTC irq in irr, Or we will can not 
+inject RTC irq.
+        ret = 1;
+        goto out;
+    }
+
+I agree that we move the operation of clearing RTC irq from cmos_ioport_read() 
+to
+cmos_ioport_write() to ensure the action been done.
+
+Thanks,
+Hailiang
+I will try reporting it to Microsoft.
+
+Thanks,
+
+Paolo
+Thanks,
+Gonglei
+*发件人：*Paolo Bonzini
+*收件人：*龚磊,张海亮,qemu-devel,Michael S. Tsirkin
+*抄送：*黄伟栋,王欣,谢祥有
+*时间：*2017-12-02 01:10:08
+*主题:*Re: [BUG] Windows 7 got stuck easily while run PCMark10 application
+
+On 01/12/2017 08:08, Gonglei (Arei) wrote:
+First write to 0x70, cmos_index = 0xc & 0x7f = 0xc
+        CPU 0/KVM-15566 kvm_pio: pio_write at 0x70 size 1 count 1 val 0xc> Second write to 
+0x70, cmos_index = 0x86 & 0x7f = 0x6>        CPU 1/KVM-15567 kvm_pio: pio_write at 0x70 
+size 1 count 1 val 0x86> vcpu0 read 0x6 because cmos_index is 0x6 now:>        CPU 
+0/KVM-15566 kvm_pio: pio_read at 0x71 size 1 count 1 val 0x6> vcpu1
+read 0x6:>        CPU 1/KVM-15567 kvm_pio: pio_read at 0x71 size 1 count
+1 val 0x6
+This seems to be a Windows bug.  The easiest workaround that I
+can think of is to clear the interrupts already when 0xc is written,
+without waiting for the read (because REG_C can only be read).
+
+What do you think?
+
+Thanks,
+
+Paolo
+.
+
diff --git a/results/classifier/zero-shot/010/review/80570214 b/results/classifier/zero-shot/010/review/80570214
new file mode 100644
index 00000000..ea22e620
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/80570214
@@ -0,0 +1,424 @@
+vnc: 0.983
+permissions: 0.983
+debug: 0.979
+semantic: 0.978
+other: 0.978
+graphic: 0.978
+performance: 0.976
+PID: 0.976
+network: 0.975
+socket: 0.975
+device: 0.974
+KVM: 0.971
+boot: 0.969
+files: 0.961
+debug: 0.918
+PID: 0.085
+files: 0.068
+network: 0.061
+performance: 0.032
+other: 0.024
+KVM: 0.015
+socket: 0.011
+semantic: 0.010
+vnc: 0.005
+device: 0.005
+graphic: 0.002
+permissions: 0.002
+boot: 0.001
+
+[Qemu-devel] [vhost-user BUG ?] QEMU process segfault when shutdown or reboot with vhost-user
+
+Hi,
+
+We catch a segfault in our project.
+
+Qemu version is 2.3.0
+
+The Stack backtrace is:
+(gdb) bt
+#0  0x0000000000000000 in ?? ()
+#1  0x00007f7ad9280b2f in qemu_deliver_packet (sender=<optimized out>, flags=<optimized 
+out>, data=<optimized out>, size=100, opaque=
+    0x7f7ad9d6db10) at net/net.c:510
+#2  0x00007f7ad92831fa in qemu_net_queue_deliver (size=<optimized out>, data=<optimized 
+out>, flags=<optimized out>,
+    sender=<optimized out>, queue=<optimized out>) at net/queue.c:157
+#3  qemu_net_queue_flush (queue=0x7f7ad9d39630) at net/queue.c:254
+#4  0x00007f7ad9280dac in qemu_flush_or_purge_queued_packets 
+(nc=0x7f7ad9d6db10, purge=true) at net/net.c:539
+#5  0x00007f7ad9280e76 in net_vm_change_state_handler (opaque=<optimized out>, 
+running=<optimized out>, state=100) at net/net.c:1214
+#6  0x00007f7ad915612f in vm_state_notify (running=0, state=RUN_STATE_SHUTDOWN) 
+at vl.c:1820
+#7  0x00007f7ad906db1a in do_vm_stop (state=<optimized out>) at 
+/usr/src/packages/BUILD/qemu-kvm-2.3.0/cpus.c:631
+#8  vm_stop (state=RUN_STATE_SHUTDOWN) at 
+/usr/src/packages/BUILD/qemu-kvm-2.3.0/cpus.c:1325
+#9  0x00007f7ad915e4a2 in main_loop_should_exit () at vl.c:2080
+#10 main_loop () at vl.c:2131
+#11 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at 
+vl.c:4721
+(gdb) p *(NetClientState *)0x7f7ad9d6db10
+$1 = {info = 0x7f7ad9824520, link_down = 0, next = {tqe_next = 0x7f7ad0f06d10, 
+tqe_prev = 0x7f7ad98b1cf0}, peer = 0x7f7ad0f06d10,
+  incoming_queue = 0x7f7ad9d39630, model = 0x7f7ad9d39590 "vhost_user", name = 
+0x7f7ad9d39570 "hostnet0", info_str =
+    "vhost-user to charnet0", '\000' <repeats 233 times>, receive_disabled = 0, 
+destructor =
+    0x7f7ad92821f0 <qemu_net_client_destructor>, queue_index = 0, 
+rxfilter_notify_enabled = 0}
+(gdb) p *(NetClientInfo *)0x7f7ad9824520
+$2 = {type = NET_CLIENT_OPTIONS_KIND_VHOST_USER, size = 360, receive = 0, 
+receive_raw = 0, receive_iov = 0, can_receive = 0, cleanup =
+    0x7f7ad9288850 <vhost_user_cleanup>, link_status_changed = 0, 
+query_rx_filter = 0, poll = 0, has_ufo =
+    0x7f7ad92886d0 <vhost_user_has_ufo>, has_vnet_hdr = 0x7f7ad9288670 
+<vhost_user_has_vnet_hdr>, has_vnet_hdr_len = 0,
+  using_vnet_hdr = 0, set_offload = 0, set_vnet_hdr_len = 0}
+(gdb)
+
+The corresponding codes where gdb reports error are: (We have added some codes 
+in net.c)
+ssize_t qemu_deliver_packet(NetClientState *sender,
+                            unsigned flags,
+                            const uint8_t *data,
+                            size_t size,
+                            void *opaque)
+{
+    NetClientState *nc = opaque;
+    ssize_t ret;
+
+    if (nc->link_down) {
+        return size;
+    }
+
+    if (nc->receive_disabled) {
+        return 0;
+    }
+
+    if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
+        ret = nc->info->receive_raw(nc, data, size);
+    } else {
+        ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
+    }
+
+I'm not quite familiar with vhost-user, but for vhost-user, these two callback 
+functions seem to be always NULL,
+Why we can come here ?
+Is it an error to add VM state change handler for vhost-user ?
+
+Thanks,
+zhanghailiang
+
+Hi
+
+On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
+<address@hidden> wrote:
+>
+The corresponding codes where gdb reports error are: (We have added some
+>
+codes in net.c)
+Can you reproduce with unmodified qemu? Could you give instructions to do so?
+
+>
+ssize_t qemu_deliver_packet(NetClientState *sender,
+>
+unsigned flags,
+>
+const uint8_t *data,
+>
+size_t size,
+>
+void *opaque)
+>
+{
+>
+NetClientState *nc = opaque;
+>
+ssize_t ret;
+>
+>
+if (nc->link_down) {
+>
+return size;
+>
+}
+>
+>
+if (nc->receive_disabled) {
+>
+return 0;
+>
+}
+>
+>
+if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
+>
+ret = nc->info->receive_raw(nc, data, size);
+>
+} else {
+>
+ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
+>
+}
+>
+>
+I'm not quite familiar with vhost-user, but for vhost-user, these two
+>
+callback functions seem to be always NULL,
+>
+Why we can come here ?
+You should not come here, vhost-user has nc->receive_disabled (it
+changes in 2.5)
+
+-- 
+Marc-André Lureau
+
+On 2015/11/3 22:54, Marc-André Lureau wrote:
+Hi
+
+On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
+<address@hidden> wrote:
+The corresponding codes where gdb reports error are: (We have added some
+codes in net.c)
+Can you reproduce with unmodified qemu? Could you give instructions to do so?
+OK, i will try to do it. There is nothing special, we run iperf tool in VM,
+and then shutdown or reboot it. There is change you can catch segfault.
+ssize_t qemu_deliver_packet(NetClientState *sender,
+                             unsigned flags,
+                             const uint8_t *data,
+                             size_t size,
+                             void *opaque)
+{
+     NetClientState *nc = opaque;
+     ssize_t ret;
+
+     if (nc->link_down) {
+         return size;
+     }
+
+     if (nc->receive_disabled) {
+         return 0;
+     }
+
+     if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
+         ret = nc->info->receive_raw(nc, data, size);
+     } else {
+         ret = nc->info->receive(nc, data, size);   ----> Here is 510 line
+     }
+
+I'm not quite familiar with vhost-user, but for vhost-user, these two
+callback functions seem to be always NULL,
+Why we can come here ?
+You should not come here, vhost-user has nc->receive_disabled (it
+changes in 2.5)
+I have looked at the newest codes, i think we can still have chance to
+come here, since we will change nc->receive_disable to false temporarily in
+qemu_flush_or_purge_queued_packets(), there is no difference between 2.3 and 2.5
+for this.
+Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
+in qemu_net_queue_flush() for vhost-user ?
+
+i will try to reproduce it by using newest qemu.
+
+Thanks,
+zhanghailiang
+
+On 11/04/2015 10:24 AM, zhanghailiang wrote:
+>
+On 2015/11/3 22:54, Marc-André Lureau wrote:
+>
+> Hi
+>
+>
+>
+> On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
+>
+> <address@hidden> wrote:
+>
+>> The corresponding codes where gdb reports error are: (We have added
+>
+>> some
+>
+>> codes in net.c)
+>
+>
+>
+> Can you reproduce with unmodified qemu? Could you give instructions
+>
+> to do so?
+>
+>
+>
+>
+OK, i will try to do it. There is nothing special, we run iperf tool
+>
+in VM,
+>
+and then shutdown or reboot it. There is change you can catch segfault.
+>
+>
+>> ssize_t qemu_deliver_packet(NetClientState *sender,
+>
+>>                              unsigned flags,
+>
+>>                              const uint8_t *data,
+>
+>>                              size_t size,
+>
+>>                              void *opaque)
+>
+>> {
+>
+>>      NetClientState *nc = opaque;
+>
+>>      ssize_t ret;
+>
+>>
+>
+>>      if (nc->link_down) {
+>
+>>          return size;
+>
+>>      }
+>
+>>
+>
+>>      if (nc->receive_disabled) {
+>
+>>          return 0;
+>
+>>      }
+>
+>>
+>
+>>      if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
+>
+>>          ret = nc->info->receive_raw(nc, data, size);
+>
+>>      } else {
+>
+>>          ret = nc->info->receive(nc, data, size);   ----> Here is
+>
+>> 510 line
+>
+>>      }
+>
+>>
+>
+>> I'm not quite familiar with vhost-user, but for vhost-user, these two
+>
+>> callback functions seem to be always NULL,
+>
+>> Why we can come here ?
+>
+>
+>
+> You should not come here, vhost-user has nc->receive_disabled (it
+>
+> changes in 2.5)
+>
+>
+>
+>
+I have looked at the newest codes, i think we can still have chance to
+>
+come here, since we will change nc->receive_disable to false
+>
+temporarily in
+>
+qemu_flush_or_purge_queued_packets(), there is no difference between
+>
+2.3 and 2.5
+>
+for this.
+>
+Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
+>
+in qemu_net_queue_flush() for vhost-user ?
+The only thing I can image is self announcing. Are you trying to do
+migration? 2.5 only support sending rarp through this.
+
+And it's better to have a breakpoint to see why a packet was queued for
+vhost-user. The stack trace may also help in this case.
+
+>
+>
+i will try to reproduce it by using newest qemu.
+>
+>
+Thanks,
+>
+zhanghailiang
+>
+
+On 2015/11/4 11:19, Jason Wang wrote:
+On 11/04/2015 10:24 AM, zhanghailiang wrote:
+On 2015/11/3 22:54, Marc-André Lureau wrote:
+Hi
+
+On Tue, Nov 3, 2015 at 2:01 PM, zhanghailiang
+<address@hidden> wrote:
+The corresponding codes where gdb reports error are: (We have added
+some
+codes in net.c)
+Can you reproduce with unmodified qemu? Could you give instructions
+to do so?
+OK, i will try to do it. There is nothing special, we run iperf tool
+in VM,
+and then shutdown or reboot it. There is change you can catch segfault.
+ssize_t qemu_deliver_packet(NetClientState *sender,
+                              unsigned flags,
+                              const uint8_t *data,
+                              size_t size,
+                              void *opaque)
+{
+      NetClientState *nc = opaque;
+      ssize_t ret;
+
+      if (nc->link_down) {
+          return size;
+      }
+
+      if (nc->receive_disabled) {
+          return 0;
+      }
+
+      if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
+          ret = nc->info->receive_raw(nc, data, size);
+      } else {
+          ret = nc->info->receive(nc, data, size);   ----> Here is
+510 line
+      }
+
+I'm not quite familiar with vhost-user, but for vhost-user, these two
+callback functions seem to be always NULL,
+Why we can come here ?
+You should not come here, vhost-user has nc->receive_disabled (it
+changes in 2.5)
+I have looked at the newest codes, i think we can still have chance to
+come here, since we will change nc->receive_disable to false
+temporarily in
+qemu_flush_or_purge_queued_packets(), there is no difference between
+2.3 and 2.5
+for this.
+Besides, is it possible for !QTAILQ_EMPTY(&queue->packets) to be true
+in qemu_net_queue_flush() for vhost-user ?
+The only thing I can image is self announcing. Are you trying to do
+migration? 2.5 only support sending rarp through this.
+Hmm, it's not triggered by migration, For qemu-2.5, IMHO, it doesn't have such 
+problem,
+since the callback function 'receive' is not NULL. It is vhost_user_receive().
+And it's better to have a breakpoint to see why a packet was queued for
+vhost-user. The stack trace may also help in this case.
+OK, i'm trying to reproduce it.
+
+Thanks,
+zhanghailiang
+i will try to reproduce it by using newest qemu.
+
+Thanks,
+zhanghailiang
+.
+
diff --git a/results/classifier/zero-shot/010/review/80604314 b/results/classifier/zero-shot/010/review/80604314
new file mode 100644
index 00000000..b90d7c05
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/80604314
@@ -0,0 +1,1504 @@
+performance: 0.919
+device: 0.917
+debug: 0.901
+graphic: 0.901
+other: 0.898
+PID: 0.896
+permissions: 0.892
+KVM: 0.891
+semantic: 0.890
+socket: 0.884
+vnc: 0.881
+network: 0.865
+files: 0.861
+boot: 0.860
+network: 0.654
+debug: 0.554
+files: 0.103
+PID: 0.097
+boot: 0.095
+device: 0.090
+vnc: 0.081
+socket: 0.055
+other: 0.021
+KVM: 0.021
+performance: 0.014
+semantic: 0.008
+permissions: 0.003
+graphic: 0.003
+
+[BUG] vhost-vdpa: qemu-system-s390x crashes with second virtio-net-ccw device
+
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>, 
+    config=0x55d6ad9e3f80 "RT") at /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+
+Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
+the autogenerated virtio-net-ccw device is present) works. Specifying
+several "-device virtio-net-pci" works as well.
+
+Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
+client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
+works (in-between state does not compile).
+
+This is reproducible with tcg as well. Same problem both with
+--enable-vhost-vdpa and --disable-vhost-vdpa.
+
+Have not yet tried to figure out what might be special with
+virtio-ccw... anyone have an idea?
+
+[This should probably be considered a blocker?]
+
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+-device virtio-net-ccw in addition to the autogenerated device), I get
+>
+a segfault. gdb points to
+>
+>
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+config=0x55d6ad9e3f80 "RT") at
+>
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+146       if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+>
+(backtrace doesn't go further)
+>
+>
+Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
+>
+the autogenerated virtio-net-ccw device is present) works. Specifying
+>
+several "-device virtio-net-pci" works as well.
+>
+>
+Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
+>
+client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
+>
+works (in-between state does not compile).
+Ouch. I didn't test all in-between states :(
+But I wish we had a 0-day instrastructure like kernel has,
+that catches things like that.
+
+>
+This is reproducible with tcg as well. Same problem both with
+>
+--enable-vhost-vdpa and --disable-vhost-vdpa.
+>
+>
+Have not yet tried to figure out what might be special with
+>
+virtio-ccw... anyone have an idea?
+>
+>
+[This should probably be considered a blocker?]
+
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin" <mst@redhat.com> wrote:
+
+>
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+> When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+> -device virtio-net-ccw in addition to the autogenerated device), I get
+>
+> a segfault. gdb points to
+>
+>
+>
+> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+>     config=0x55d6ad9e3f80 "RT") at
+>
+> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+> 146     if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+>
+>
+> (backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+
+>
+>
+>
+> Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
+>
+> the autogenerated virtio-net-ccw device is present) works. Specifying
+>
+> several "-device virtio-net-pci" works as well.
+>
+>
+>
+> Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
+>
+> client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
+>
+> works (in-between state does not compile).
+>
+>
+Ouch. I didn't test all in-between states :(
+>
+But I wish we had a 0-day instrastructure like kernel has,
+>
+that catches things like that.
+Yep, that would be useful... so patchew only builds the complete series?
+
+>
+>
+> This is reproducible with tcg as well. Same problem both with
+>
+> --enable-vhost-vdpa and --disable-vhost-vdpa.
+>
+>
+>
+> Have not yet tried to figure out what might be special with
+>
+> virtio-ccw... anyone have an idea?
+>
+>
+>
+> [This should probably be considered a blocker?]
+I think so, as it makes s390x unusable with more that one
+virtio-net-ccw device, and I don't even see a workaround.
+
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+On Fri, 24 Jul 2020 09:30:58 -0400
+>
+"Michael S. Tsirkin" <mst@redhat.com> wrote:
+>
+>
+> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+> > When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+> > -device virtio-net-ccw in addition to the autogenerated device), I get
+>
+> > a segfault. gdb points to
+>
+> >
+>
+> > #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+> >     config=0x55d6ad9e3f80 "RT") at
+>
+> > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+> > 146           if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+> >
+>
+> > (backtrace doesn't go further)
+>
+>
+The core was incomplete, but running under gdb directly shows that it
+>
+is just a bog-standard config space access (first for that device).
+>
+>
+The cause of the crash is that nc->peer is not set... no idea how that
+>
+can happen, not that familiar with that part of QEMU. (Should the code
+>
+check, or is that really something that should not happen?)
+>
+>
+What I don't understand is why it is set correctly for the first,
+>
+autogenerated virtio-net-ccw device, but not for the second one, and
+>
+why virtio-net-pci doesn't show these problems. The only difference
+>
+between -ccw and -pci that comes to my mind here is that config space
+>
+accesses for ccw are done via an asynchronous operation, so timing
+>
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+
+>
+> >
+>
+> > Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
+>
+> > the autogenerated virtio-net-ccw device is present) works. Specifying
+>
+> > several "-device virtio-net-pci" works as well.
+>
+> >
+>
+> > Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
+>
+> > client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
+>
+> > works (in-between state does not compile).
+>
+>
+>
+> Ouch. I didn't test all in-between states :(
+>
+> But I wish we had a 0-day instrastructure like kernel has,
+>
+> that catches things like that.
+>
+>
+Yep, that would be useful... so patchew only builds the complete series?
+>
+>
+>
+>
+> > This is reproducible with tcg as well. Same problem both with
+>
+> > --enable-vhost-vdpa and --disable-vhost-vdpa.
+>
+> >
+>
+> > Have not yet tried to figure out what might be special with
+>
+> > virtio-ccw... anyone have an idea?
+>
+> >
+>
+> > [This should probably be considered a blocker?]
+>
+>
+I think so, as it makes s390x unusable with more that one
+>
+virtio-net-ccw device, and I don't even see a workaround.
+
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin" <mst@redhat.com> wrote:
+
+>
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+> On Fri, 24 Jul 2020 09:30:58 -0400
+>
+> "Michael S. Tsirkin" <mst@redhat.com> wrote:
+>
+>
+>
+> > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+> > > When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+> > > -device virtio-net-ccw in addition to the autogenerated device), I get
+>
+> > > a segfault. gdb points to
+>
+> > >
+>
+> > > #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+> > >     config=0x55d6ad9e3f80 "RT") at
+>
+> > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+> > > 146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+> > >
+>
+> > > (backtrace doesn't go further)
+>
+>
+>
+> The core was incomplete, but running under gdb directly shows that it
+>
+> is just a bog-standard config space access (first for that device).
+>
+>
+>
+> The cause of the crash is that nc->peer is not set... no idea how that
+>
+> can happen, not that familiar with that part of QEMU. (Should the code
+>
+> check, or is that really something that should not happen?)
+>
+>
+>
+> What I don't understand is why it is set correctly for the first,
+>
+> autogenerated virtio-net-ccw device, but not for the second one, and
+>
+> why virtio-net-pci doesn't show these problems. The only difference
+>
+> between -ccw and -pci that comes to my mind here is that config space
+>
+> accesses for ccw are done via an asynchronous operation, so timing
+>
+> might be different.
+>
+>
+Hopefully Jason has an idea. Could you post a full command line
+>
+please? Do you need a working guest to trigger this? Does this trigger
+>
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on 
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001 
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0 
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+ 
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+
+>
+>
+> > >
+>
+> > > Starting qemu with no additional "-device virtio-net-ccw" (i.e., only
+>
+> > > the autogenerated virtio-net-ccw device is present) works. Specifying
+>
+> > > several "-device virtio-net-pci" works as well.
+>
+> > >
+>
+> > > Things break with 1e0a84ea49b6 ("vhost-vdpa: introduce vhost-vdpa net
+>
+> > > client"), 38140cc4d971 ("vhost_net: introduce set_config & get_config")
+>
+> > > works (in-between state does not compile).
+>
+> >
+>
+> > Ouch. I didn't test all in-between states :(
+>
+> > But I wish we had a 0-day instrastructure like kernel has,
+>
+> > that catches things like that.
+>
+>
+>
+> Yep, that would be useful... so patchew only builds the complete series?
+>
+>
+>
+> >
+>
+> > > This is reproducible with tcg as well. Same problem both with
+>
+> > > --enable-vhost-vdpa and --disable-vhost-vdpa.
+>
+> > >
+>
+> > > Have not yet tried to figure out what might be special with
+>
+> > > virtio-ccw... anyone have an idea?
+>
+> > >
+>
+> > > [This should probably be considered a blocker?]
+>
+>
+>
+> I think so, as it makes s390x unusable with more that one
+>
+> virtio-net-ccw device, and I don't even see a workaround.
+>
+
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+     config=0x55d6ad9e3f80 "RT") at 
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+It looks to me we forget the check the existence of peer.
+
+Please try the attached patch to see if it works.
+
+Thanks
+0001-virtio-net-check-the-existence-of-peer-before-accesi.patch
+Description:
+Text Data
+
+On Sat, 25 Jul 2020 08:40:07 +0800
+Jason Wang <jasowang@redhat.com> wrote:
+
+>
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+>
+> On Fri, 24 Jul 2020 11:17:57 -0400
+>
+> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+>
+>
+>> On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+>>> On Fri, 24 Jul 2020 09:30:58 -0400
+>
+>>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+>>>
+>
+>>>> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+>>>>> When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+>>>>> -device virtio-net-ccw in addition to the autogenerated device), I get
+>
+>>>>> a segfault. gdb points to
+>
+>>>>>
+>
+>>>>> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+>>>>>      config=0x55d6ad9e3f80 "RT") at
+>
+>>>>> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+>>>>> 146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+>>>>>
+>
+>>>>> (backtrace doesn't go further)
+>
+>>> The core was incomplete, but running under gdb directly shows that it
+>
+>>> is just a bog-standard config space access (first for that device).
+>
+>>>
+>
+>>> The cause of the crash is that nc->peer is not set... no idea how that
+>
+>>> can happen, not that familiar with that part of QEMU. (Should the code
+>
+>>> check, or is that really something that should not happen?)
+>
+>>>
+>
+>>> What I don't understand is why it is set correctly for the first,
+>
+>>> autogenerated virtio-net-ccw device, but not for the second one, and
+>
+>>> why virtio-net-pci doesn't show these problems. The only difference
+>
+>>> between -ccw and -pci that comes to my mind here is that config space
+>
+>>> accesses for ccw are done via an asynchronous operation, so timing
+>
+>>> might be different.
+>
+>> Hopefully Jason has an idea. Could you post a full command line
+>
+>> please? Do you need a working guest to trigger this? Does this trigger
+>
+>> on an x86 host?
+>
+> Yes, it does trigger with tcg-on-x86 as well. I've been using
+>
+>
+>
+> s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
+>
+> qemu,zpci=on
+>
+> -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+>
+> -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+>
+> -device
+>
+> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+>
+> -device virtio-net-ccw
+>
+>
+>
+> It seems it needs the guest actually doing something with the nics; I
+>
+> cannot reproduce the crash if I use the old advent calendar moon buggy
+>
+> image and just add a virtio-net-ccw device.
+>
+>
+>
+> (I don't think it's a problem with my local build, as I see the problem
+>
+> both on my laptop and on an LPAR.)
+>
+>
+>
+It looks to me we forget the check the existence of peer.
+>
+>
+Please try the attached patch to see if it works.
+Thanks, that patch gets my guest up and running again. So, FWIW,
+
+Tested-by: Cornelia Huck <cohuck@redhat.com>
+
+Any idea why this did not hit with virtio-net-pci (or the autogenerated
+virtio-net-ccw device)?
+
+On 2020/7/27 下午2:43, Cornelia Huck wrote:
+On Sat, 25 Jul 2020 08:40:07 +0800
+Jason Wang <jasowang@redhat.com> wrote:
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+      config=0x55d6ad9e3f80 "RT") at 
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+It looks to me we forget the check the existence of peer.
+
+Please try the attached patch to see if it works.
+Thanks, that patch gets my guest up and running again. So, FWIW,
+
+Tested-by: Cornelia Huck <cohuck@redhat.com>
+
+Any idea why this did not hit with virtio-net-pci (or the autogenerated
+virtio-net-ccw device)?
+It can be hit with virtio-net-pci as well (just start without peer).
+For autogenerated virtio-net-cww, I think the reason is that it has
+already had a peer set.
+Thanks
+
+On Mon, 27 Jul 2020 15:38:12 +0800
+Jason Wang <jasowang@redhat.com> wrote:
+
+>
+On 2020/7/27 下午2:43, Cornelia Huck wrote:
+>
+> On Sat, 25 Jul 2020 08:40:07 +0800
+>
+> Jason Wang <jasowang@redhat.com> wrote:
+>
+>
+>
+>> On 2020/7/24 下午11:34, Cornelia Huck wrote:
+>
+>>> On Fri, 24 Jul 2020 11:17:57 -0400
+>
+>>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+>>>
+>
+>>>> On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+>>>>> On Fri, 24 Jul 2020 09:30:58 -0400
+>
+>>>>> "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+>>>>>
+>
+>>>>>> On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+>>>>>>> When I start qemu with a second virtio-net-ccw device (i.e. adding
+>
+>>>>>>> -device virtio-net-ccw in addition to the autogenerated device), I get
+>
+>>>>>>> a segfault. gdb points to
+>
+>>>>>>>
+>
+>>>>>>> #0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+>
+>>>>>>>       config=0x55d6ad9e3f80 "RT") at
+>
+>>>>>>> /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+>>>>>>> 146       if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+>>>>>>>
+>
+>>>>>>> (backtrace doesn't go further)
+>
+>>>>> The core was incomplete, but running under gdb directly shows that it
+>
+>>>>> is just a bog-standard config space access (first for that device).
+>
+>>>>>
+>
+>>>>> The cause of the crash is that nc->peer is not set... no idea how that
+>
+>>>>> can happen, not that familiar with that part of QEMU. (Should the code
+>
+>>>>> check, or is that really something that should not happen?)
+>
+>>>>>
+>
+>>>>> What I don't understand is why it is set correctly for the first,
+>
+>>>>> autogenerated virtio-net-ccw device, but not for the second one, and
+>
+>>>>> why virtio-net-pci doesn't show these problems. The only difference
+>
+>>>>> between -ccw and -pci that comes to my mind here is that config space
+>
+>>>>> accesses for ccw are done via an asynchronous operation, so timing
+>
+>>>>> might be different.
+>
+>>>> Hopefully Jason has an idea. Could you post a full command line
+>
+>>>> please? Do you need a working guest to trigger this? Does this trigger
+>
+>>>> on an x86 host?
+>
+>>> Yes, it does trigger with tcg-on-x86 as well. I've been using
+>
+>>>
+>
+>>> s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
+>
+>>> qemu,zpci=on
+>
+>>> -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+>
+>>> -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+>
+>>> -device
+>
+>>> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+>
+>>> -device virtio-net-ccw
+>
+>>>
+>
+>>> It seems it needs the guest actually doing something with the nics; I
+>
+>>> cannot reproduce the crash if I use the old advent calendar moon buggy
+>
+>>> image and just add a virtio-net-ccw device.
+>
+>>>
+>
+>>> (I don't think it's a problem with my local build, as I see the problem
+>
+>>> both on my laptop and on an LPAR.)
+>
+>>
+>
+>> It looks to me we forget the check the existence of peer.
+>
+>>
+>
+>> Please try the attached patch to see if it works.
+>
+> Thanks, that patch gets my guest up and running again. So, FWIW,
+>
+>
+>
+> Tested-by: Cornelia Huck <cohuck@redhat.com>
+>
+>
+>
+> Any idea why this did not hit with virtio-net-pci (or the autogenerated
+>
+> virtio-net-ccw device)?
+>
+>
+>
+It can be hit with virtio-net-pci as well (just start without peer).
+Hm, I had not been able to reproduce the crash with a 'naked' -device
+virtio-net-pci. But checking seems to be the right idea anyway.
+
+>
+>
+For autogenerated virtio-net-cww, I think the reason is that it has
+>
+already had a peer set.
+Ok, that might well be.
+
+On 2020/7/27 下午4:41, Cornelia Huck wrote:
+On Mon, 27 Jul 2020 15:38:12 +0800
+Jason Wang <jasowang@redhat.com> wrote:
+On 2020/7/27 下午2:43, Cornelia Huck wrote:
+On Sat, 25 Jul 2020 08:40:07 +0800
+Jason Wang <jasowang@redhat.com> wrote:
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin"<mst@redhat.com>  wrote:
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+       config=0x55d6ad9e3f80 "RT") at 
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+It looks to me we forget the check the existence of peer.
+
+Please try the attached patch to see if it works.
+Thanks, that patch gets my guest up and running again. So, FWIW,
+
+Tested-by: Cornelia Huck <cohuck@redhat.com>
+
+Any idea why this did not hit with virtio-net-pci (or the autogenerated
+virtio-net-ccw device)?
+It can be hit with virtio-net-pci as well (just start without peer).
+Hm, I had not been able to reproduce the crash with a 'naked' -device
+virtio-net-pci. But checking seems to be the right idea anyway.
+Sorry for being unclear, I meant for networking part, you just need
+start without peer, and you need a real guest (any Linux) that is trying
+to access the config space of virtio-net.
+Thanks
+For autogenerated virtio-net-cww, I think the reason is that it has
+already had a peer set.
+Ok, that might well be.
+
+On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
+>
+>
+On 2020/7/27 下午4:41, Cornelia Huck wrote:
+>
+> On Mon, 27 Jul 2020 15:38:12 +0800
+>
+> Jason Wang <jasowang@redhat.com> wrote:
+>
+>
+>
+> > On 2020/7/27 下午2:43, Cornelia Huck wrote:
+>
+> > > On Sat, 25 Jul 2020 08:40:07 +0800
+>
+> > > Jason Wang <jasowang@redhat.com> wrote:
+>
+> > > > On 2020/7/24 下午11:34, Cornelia Huck wrote:
+>
+> > > > > On Fri, 24 Jul 2020 11:17:57 -0400
+>
+> > > > > "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+> > > > > > On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+> > > > > > > On Fri, 24 Jul 2020 09:30:58 -0400
+>
+> > > > > > > "Michael S. Tsirkin"<mst@redhat.com>  wrote:
+>
+> > > > > > > > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+>
+> > > > > > > > > When I start qemu with a second virtio-net-ccw device (i.e.
+>
+> > > > > > > > > adding
+>
+> > > > > > > > > -device virtio-net-ccw in addition to the autogenerated
+>
+> > > > > > > > > device), I get
+>
+> > > > > > > > > a segfault. gdb points to
+>
+> > > > > > > > >
+>
+> > > > > > > > > #0  0x000055d6ab52681d in virtio_net_get_config
+>
+> > > > > > > > > (vdev=<optimized out>,
+>
+> > > > > > > > >        config=0x55d6ad9e3f80 "RT") at
+>
+> > > > > > > > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+> > > > > > > > > 146     if (nc->peer->info->type ==
+>
+> > > > > > > > > NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+> > > > > > > > >
+>
+> > > > > > > > > (backtrace doesn't go further)
+>
+> > > > > > > The core was incomplete, but running under gdb directly shows
+>
+> > > > > > > that it
+>
+> > > > > > > is just a bog-standard config space access (first for that
+>
+> > > > > > > device).
+>
+> > > > > > >
+>
+> > > > > > > The cause of the crash is that nc->peer is not set... no idea
+>
+> > > > > > > how that
+>
+> > > > > > > can happen, not that familiar with that part of QEMU. (Should
+>
+> > > > > > > the code
+>
+> > > > > > > check, or is that really something that should not happen?)
+>
+> > > > > > >
+>
+> > > > > > > What I don't understand is why it is set correctly for the
+>
+> > > > > > > first,
+>
+> > > > > > > autogenerated virtio-net-ccw device, but not for the second
+>
+> > > > > > > one, and
+>
+> > > > > > > why virtio-net-pci doesn't show these problems. The only
+>
+> > > > > > > difference
+>
+> > > > > > > between -ccw and -pci that comes to my mind here is that config
+>
+> > > > > > > space
+>
+> > > > > > > accesses for ccw are done via an asynchronous operation, so
+>
+> > > > > > > timing
+>
+> > > > > > > might be different.
+>
+> > > > > > Hopefully Jason has an idea. Could you post a full command line
+>
+> > > > > > please? Do you need a working guest to trigger this? Does this
+>
+> > > > > > trigger
+>
+> > > > > > on an x86 host?
+>
+> > > > > Yes, it does trigger with tcg-on-x86 as well. I've been using
+>
+> > > > >
+>
+> > > > > s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu
+>
+> > > > > qemu,zpci=on
+>
+> > > > > -m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+>
+> > > > > -drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+>
+> > > > > -device
+>
+> > > > > scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+>
+> > > > > -device virtio-net-ccw
+>
+> > > > >
+>
+> > > > > It seems it needs the guest actually doing something with the nics;
+>
+> > > > > I
+>
+> > > > > cannot reproduce the crash if I use the old advent calendar moon
+>
+> > > > > buggy
+>
+> > > > > image and just add a virtio-net-ccw device.
+>
+> > > > >
+>
+> > > > > (I don't think it's a problem with my local build, as I see the
+>
+> > > > > problem
+>
+> > > > > both on my laptop and on an LPAR.)
+>
+> > > > It looks to me we forget the check the existence of peer.
+>
+> > > >
+>
+> > > > Please try the attached patch to see if it works.
+>
+> > > Thanks, that patch gets my guest up and running again. So, FWIW,
+>
+> > >
+>
+> > > Tested-by: Cornelia Huck <cohuck@redhat.com>
+>
+> > >
+>
+> > > Any idea why this did not hit with virtio-net-pci (or the autogenerated
+>
+> > > virtio-net-ccw device)?
+>
+> >
+>
+> > It can be hit with virtio-net-pci as well (just start without peer).
+>
+> Hm, I had not been able to reproduce the crash with a 'naked' -device
+>
+> virtio-net-pci. But checking seems to be the right idea anyway.
+>
+>
+>
+Sorry for being unclear, I meant for networking part, you just need start
+>
+without peer, and you need a real guest (any Linux) that is trying to access
+>
+the config space of virtio-net.
+>
+>
+Thanks
+A pxe guest will do it, but that doesn't support ccw, right?
+
+I'm still unclear why this triggers with ccw but not pci -
+any idea?
+
+>
+>
+>
+>
+> > For autogenerated virtio-net-cww, I think the reason is that it has
+>
+> > already had a peer set.
+>
+> Ok, that might well be.
+>
+>
+>
+>
+
+On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
+On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
+On 2020/7/27 下午4:41, Cornelia Huck wrote:
+On Mon, 27 Jul 2020 15:38:12 +0800
+Jason Wang<jasowang@redhat.com>  wrote:
+On 2020/7/27 下午2:43, Cornelia Huck wrote:
+On Sat, 25 Jul 2020 08:40:07 +0800
+Jason Wang<jasowang@redhat.com>  wrote:
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin"<mst@redhat.com>   wrote:
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin"<mst@redhat.com>   wrote:
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+        config=0x55d6ad9e3f80 "RT") at 
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+It looks to me we forget the check the existence of peer.
+
+Please try the attached patch to see if it works.
+Thanks, that patch gets my guest up and running again. So, FWIW,
+
+Tested-by: Cornelia Huck<cohuck@redhat.com>
+
+Any idea why this did not hit with virtio-net-pci (or the autogenerated
+virtio-net-ccw device)?
+It can be hit with virtio-net-pci as well (just start without peer).
+Hm, I had not been able to reproduce the crash with a 'naked' -device
+virtio-net-pci. But checking seems to be the right idea anyway.
+Sorry for being unclear, I meant for networking part, you just need start
+without peer, and you need a real guest (any Linux) that is trying to access
+the config space of virtio-net.
+
+Thanks
+A pxe guest will do it, but that doesn't support ccw, right?
+Yes, it depends on the cli actually.
+I'm still unclear why this triggers with ccw but not pci -
+any idea?
+I don't test pxe but I can reproduce this with pci (just start a linux
+guest without a peer).
+Thanks
+
+On Mon, Jul 27, 2020 at 08:44:09PM +0800, Jason Wang wrote:
+>
+>
+On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
+>
+> On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
+>
+> > On 2020/7/27 下午4:41, Cornelia Huck wrote:
+>
+> > > On Mon, 27 Jul 2020 15:38:12 +0800
+>
+> > > Jason Wang<jasowang@redhat.com>  wrote:
+>
+> > >
+>
+> > > > On 2020/7/27 下午2:43, Cornelia Huck wrote:
+>
+> > > > > On Sat, 25 Jul 2020 08:40:07 +0800
+>
+> > > > > Jason Wang<jasowang@redhat.com>  wrote:
+>
+> > > > > > On 2020/7/24 下午11:34, Cornelia Huck wrote:
+>
+> > > > > > > On Fri, 24 Jul 2020 11:17:57 -0400
+>
+> > > > > > > "Michael S. Tsirkin"<mst@redhat.com>   wrote:
+>
+> > > > > > > > On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+>
+> > > > > > > > > On Fri, 24 Jul 2020 09:30:58 -0400
+>
+> > > > > > > > > "Michael S. Tsirkin"<mst@redhat.com>   wrote:
+>
+> > > > > > > > > > On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck
+>
+> > > > > > > > > > wrote:
+>
+> > > > > > > > > > > When I start qemu with a second virtio-net-ccw device
+>
+> > > > > > > > > > > (i.e. adding
+>
+> > > > > > > > > > > -device virtio-net-ccw in addition to the autogenerated
+>
+> > > > > > > > > > > device), I get
+>
+> > > > > > > > > > > a segfault. gdb points to
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > > #0  0x000055d6ab52681d in virtio_net_get_config
+>
+> > > > > > > > > > > (vdev=<optimized out>,
+>
+> > > > > > > > > > >         config=0x55d6ad9e3f80 "RT") at
+>
+> > > > > > > > > > > /home/cohuck/git/qemu/hw/net/virtio-net.c:146
+>
+> > > > > > > > > > > 146         if (nc->peer->info->type ==
+>
+> > > > > > > > > > > NET_CLIENT_DRIVER_VHOST_VDPA) {
+>
+> > > > > > > > > > >
+>
+> > > > > > > > > > > (backtrace doesn't go further)
+>
+> > > > > > > > > The core was incomplete, but running under gdb directly
+>
+> > > > > > > > > shows that it
+>
+> > > > > > > > > is just a bog-standard config space access (first for that
+>
+> > > > > > > > > device).
+>
+> > > > > > > > >
+>
+> > > > > > > > > The cause of the crash is that nc->peer is not set... no
+>
+> > > > > > > > > idea how that
+>
+> > > > > > > > > can happen, not that familiar with that part of QEMU.
+>
+> > > > > > > > > (Should the code
+>
+> > > > > > > > > check, or is that really something that should not happen?)
+>
+> > > > > > > > >
+>
+> > > > > > > > > What I don't understand is why it is set correctly for the
+>
+> > > > > > > > > first,
+>
+> > > > > > > > > autogenerated virtio-net-ccw device, but not for the second
+>
+> > > > > > > > > one, and
+>
+> > > > > > > > > why virtio-net-pci doesn't show these problems. The only
+>
+> > > > > > > > > difference
+>
+> > > > > > > > > between -ccw and -pci that comes to my mind here is that
+>
+> > > > > > > > > config space
+>
+> > > > > > > > > accesses for ccw are done via an asynchronous operation, so
+>
+> > > > > > > > > timing
+>
+> > > > > > > > > might be different.
+>
+> > > > > > > > Hopefully Jason has an idea. Could you post a full command
+>
+> > > > > > > > line
+>
+> > > > > > > > please? Do you need a working guest to trigger this? Does
+>
+> > > > > > > > this trigger
+>
+> > > > > > > > on an x86 host?
+>
+> > > > > > > Yes, it does trigger with tcg-on-x86 as well. I've been using
+>
+> > > > > > >
+>
+> > > > > > > s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg
+>
+> > > > > > > -cpu qemu,zpci=on
+>
+> > > > > > > -m 1024 -nographic -device
+>
+> > > > > > > virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+>
+> > > > > > > -drive
+>
+> > > > > > > file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+>
+> > > > > > > -device
+>
+> > > > > > > scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+>
+> > > > > > > -device virtio-net-ccw
+>
+> > > > > > >
+>
+> > > > > > > It seems it needs the guest actually doing something with the
+>
+> > > > > > > nics; I
+>
+> > > > > > > cannot reproduce the crash if I use the old advent calendar
+>
+> > > > > > > moon buggy
+>
+> > > > > > > image and just add a virtio-net-ccw device.
+>
+> > > > > > >
+>
+> > > > > > > (I don't think it's a problem with my local build, as I see the
+>
+> > > > > > > problem
+>
+> > > > > > > both on my laptop and on an LPAR.)
+>
+> > > > > > It looks to me we forget the check the existence of peer.
+>
+> > > > > >
+>
+> > > > > > Please try the attached patch to see if it works.
+>
+> > > > > Thanks, that patch gets my guest up and running again. So, FWIW,
+>
+> > > > >
+>
+> > > > > Tested-by: Cornelia Huck<cohuck@redhat.com>
+>
+> > > > >
+>
+> > > > > Any idea why this did not hit with virtio-net-pci (or the
+>
+> > > > > autogenerated
+>
+> > > > > virtio-net-ccw device)?
+>
+> > > > It can be hit with virtio-net-pci as well (just start without peer).
+>
+> > > Hm, I had not been able to reproduce the crash with a 'naked' -device
+>
+> > > virtio-net-pci. But checking seems to be the right idea anyway.
+>
+> > Sorry for being unclear, I meant for networking part, you just need start
+>
+> > without peer, and you need a real guest (any Linux) that is trying to
+>
+> > access
+>
+> > the config space of virtio-net.
+>
+> >
+>
+> > Thanks
+>
+> A pxe guest will do it, but that doesn't support ccw, right?
+>
+>
+>
+Yes, it depends on the cli actually.
+>
+>
+>
+>
+>
+> I'm still unclear why this triggers with ccw but not pci -
+>
+> any idea?
+>
+>
+>
+I don't test pxe but I can reproduce this with pci (just start a linux guest
+>
+without a peer).
+>
+>
+Thanks
+>
+Might be a good addition to a unit test. Not sure what would the
+test do exactly: just make sure guest runs? Looks like a lot of work
+for an empty test ... maybe we can poke at the guest config with
+qtest commands at least.
+
+-- 
+MST
+
+On 2020/7/27 下午9:16, Michael S. Tsirkin wrote:
+On Mon, Jul 27, 2020 at 08:44:09PM +0800, Jason Wang wrote:
+On 2020/7/27 下午7:43, Michael S. Tsirkin wrote:
+On Mon, Jul 27, 2020 at 04:51:23PM +0800, Jason Wang wrote:
+On 2020/7/27 下午4:41, Cornelia Huck wrote:
+On Mon, 27 Jul 2020 15:38:12 +0800
+Jason Wang<jasowang@redhat.com>  wrote:
+On 2020/7/27 下午2:43, Cornelia Huck wrote:
+On Sat, 25 Jul 2020 08:40:07 +0800
+Jason Wang<jasowang@redhat.com>  wrote:
+On 2020/7/24 下午11:34, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 11:17:57 -0400
+"Michael S. Tsirkin"<mst@redhat.com>   wrote:
+On Fri, Jul 24, 2020 at 04:56:27PM +0200, Cornelia Huck wrote:
+On Fri, 24 Jul 2020 09:30:58 -0400
+"Michael S. Tsirkin"<mst@redhat.com>   wrote:
+On Fri, Jul 24, 2020 at 03:27:18PM +0200, Cornelia Huck wrote:
+When I start qemu with a second virtio-net-ccw device (i.e. adding
+-device virtio-net-ccw in addition to the autogenerated device), I get
+a segfault. gdb points to
+
+#0  0x000055d6ab52681d in virtio_net_get_config (vdev=<optimized out>,
+         config=0x55d6ad9e3f80 "RT") at 
+/home/cohuck/git/qemu/hw/net/virtio-net.c:146
+146         if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+
+(backtrace doesn't go further)
+The core was incomplete, but running under gdb directly shows that it
+is just a bog-standard config space access (first for that device).
+
+The cause of the crash is that nc->peer is not set... no idea how that
+can happen, not that familiar with that part of QEMU. (Should the code
+check, or is that really something that should not happen?)
+
+What I don't understand is why it is set correctly for the first,
+autogenerated virtio-net-ccw device, but not for the second one, and
+why virtio-net-pci doesn't show these problems. The only difference
+between -ccw and -pci that comes to my mind here is that config space
+accesses for ccw are done via an asynchronous operation, so timing
+might be different.
+Hopefully Jason has an idea. Could you post a full command line
+please? Do you need a working guest to trigger this? Does this trigger
+on an x86 host?
+Yes, it does trigger with tcg-on-x86 as well. I've been using
+
+s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu qemu,zpci=on
+-m 1024 -nographic -device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001
+-drive file=/path/to/image,format=qcow2,if=none,id=drive-scsi0-0-0-0
+-device 
+scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
+-device virtio-net-ccw
+
+It seems it needs the guest actually doing something with the nics; I
+cannot reproduce the crash if I use the old advent calendar moon buggy
+image and just add a virtio-net-ccw device.
+
+(I don't think it's a problem with my local build, as I see the problem
+both on my laptop and on an LPAR.)
+It looks to me we forget the check the existence of peer.
+
+Please try the attached patch to see if it works.
+Thanks, that patch gets my guest up and running again. So, FWIW,
+
+Tested-by: Cornelia Huck<cohuck@redhat.com>
+
+Any idea why this did not hit with virtio-net-pci (or the autogenerated
+virtio-net-ccw device)?
+It can be hit with virtio-net-pci as well (just start without peer).
+Hm, I had not been able to reproduce the crash with a 'naked' -device
+virtio-net-pci. But checking seems to be the right idea anyway.
+Sorry for being unclear, I meant for networking part, you just need start
+without peer, and you need a real guest (any Linux) that is trying to access
+the config space of virtio-net.
+
+Thanks
+A pxe guest will do it, but that doesn't support ccw, right?
+Yes, it depends on the cli actually.
+I'm still unclear why this triggers with ccw but not pci -
+any idea?
+I don't test pxe but I can reproduce this with pci (just start a linux guest
+without a peer).
+
+Thanks
+Might be a good addition to a unit test. Not sure what would the
+test do exactly: just make sure guest runs? Looks like a lot of work
+for an empty test ... maybe we can poke at the guest config with
+qtest commands at least.
+That should work or we can simply extend the exist virtio-net qtest to
+do that.
+Thanks
+
diff --git a/results/classifier/zero-shot/010/review/80615920 b/results/classifier/zero-shot/010/review/80615920
new file mode 100644
index 00000000..84f59713
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/80615920
@@ -0,0 +1,372 @@
+KVM: 0.803
+other: 0.786
+vnc: 0.768
+performance: 0.758
+permissions: 0.758
+files: 0.751
+boot: 0.750
+device: 0.748
+debug: 0.746
+semantic: 0.737
+network: 0.732
+socket: 0.732
+graphic: 0.730
+PID: 0.727
+debug: 0.296
+performance: 0.112
+files: 0.046
+PID: 0.035
+other: 0.008
+boot: 0.007
+KVM: 0.005
+device: 0.005
+semantic: 0.005
+graphic: 0.002
+network: 0.001
+socket: 0.001
+vnc: 0.001
+permissions: 0.001
+
+[BUG] accel/tcg: cpu_exec_longjmp_cleanup: assertion failed: (cpu == current_cpu)
+
+It seems there is a bug in SIGALRM handling when 486 system emulates x86_64 
+code.
+
+This code: 
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <pthread.h>
+#include <signal.h>
+#include <unistd.h>
+
+pthread_t thread1, thread2;
+
+// Signal handler for SIGALRM
+void alarm_handler(int sig) {
+    // Do nothing, just wake up the other thread
+}
+
+// Thread 1 function
+void* thread1_func(void* arg) {
+    // Set up the signal handler for SIGALRM
+    signal(SIGALRM, alarm_handler);
+
+    // Wait for 5 seconds
+    sleep(1);
+
+    // Send SIGALRM signal to thread 2
+    pthread_kill(thread2, SIGALRM);
+
+    return NULL;
+}
+
+// Thread 2 function
+void* thread2_func(void* arg) {
+    // Wait for the SIGALRM signal
+    pause();
+
+    printf("Thread 2 woke up!\n");
+
+    return NULL;
+}
+
+int main() {
+    // Create thread 1
+    if (pthread_create(&thread1, NULL, thread1_func, NULL) != 0) {
+        fprintf(stderr, "Failed to create thread 1\n");
+        return 1;
+    }
+
+    // Create thread 2
+    if (pthread_create(&thread2, NULL, thread2_func, NULL) != 0) {
+        fprintf(stderr, "Failed to create thread 2\n");
+        return 1;
+    }
+
+    // Wait for both threads to finish
+    pthread_join(thread1, NULL);
+    pthread_join(thread2, NULL);
+
+    return 0;
+}
+
+
+Fails with this -strace log (there are also unsupported syscalls 334 and 435, 
+but it seems it doesn't affect the code much):
+
+...
+736 rt_sigaction(SIGALRM,0x000000001123ec20,0x000000001123ecc0) = 0
+736 clock_nanosleep(CLOCK_REALTIME,0,{tv_sec = 1,tv_nsec = 0},{tv_sec = 
+1,tv_nsec = 0})
+736 rt_sigprocmask(SIG_BLOCK,0x00000000109fad20,0x0000000010800b38,8) = 0
+736 Unknown syscall 435
+736 
+clone(CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|
+ ...
+736 rt_sigprocmask(SIG_SETMASK,0x0000000010800b38,NULL,8)
+736 set_robust_list(0x11a419a0,0) = -1 errno=38 (Function not implemented)
+736 rt_sigprocmask(SIG_SETMASK,0x0000000011a41fb0,NULL,8) = 0
+ = 0
+736 pause(0,0,2,277186368,0,295966400)
+736 
+futex(0x000000001123f990,FUTEX_CLOCK_REALTIME|FUTEX_WAIT_BITSET,738,NULL,NULL,0)
+ = 0
+736 rt_sigprocmask(SIG_BLOCK,0x00000000109fad20,0x000000001123ee88,8) = 0
+736 getpid() = 736
+736 tgkill(736,739,SIGALRM) = 0
+ = -1 errno=4 (Interrupted system call)
+--- SIGALRM {si_signo=SIGALRM, si_code=SI_TKILL, si_pid=736, si_uid=0} ---
+0x48874a != 0x3c69e10
+736 rt_sigprocmask(SIG_SETMASK,0x000000001123ee88,NULL,8) = 0
+**
+ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
+(cpu == current_cpu)
+Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
+failed: (cpu == current_cpu)
+0x48874a != 0x3c69e10
+**
+ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
+(cpu == current_cpu)
+Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
+failed: (cpu == current_cpu)
+# 
+
+The code fails either with or without -singlestep, the command line:
+
+/usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestep  /opt/x86_64/alarm.bin
+
+Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't 
+use RDTSC on i486" [1], 
+with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now prints 
+current pointers of 
+cpu and current_cpu (line "0x48874a != 0x3c69e10").
+
+config.log (built as a part of buildroot, basically the minimal possible 
+configuration for running x86_64 on 486):
+
+# Configured with: 
+'/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/build/qemu-8.1.1/configure'
+ '--prefix=/usr' 
+'--cross-prefix=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/i486-buildroot-linux-gnu-'
+ '--audio-drv-list=' 
+'--python=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/python3'
+ 
+'--ninja=/mnt/hd_8tb_p1/p1/home/crossgen/buildroot_486_2/output/host/bin/ninja' 
+'--disable-alsa' '--disable-bpf' '--disable-brlapi' '--disable-bsd-user' 
+'--disable-cap-ng' '--disable-capstone' '--disable-containers' 
+'--disable-coreaudio' '--disable-curl' '--disable-curses' 
+'--disable-dbus-display' '--disable-docs' '--disable-dsound' '--disable-hvf' 
+'--disable-jack' '--disable-libiscsi' '--disable-linux-aio' 
+'--disable-linux-io-uring' '--disable-malloc-trim' '--disable-membarrier' 
+'--disable-mpath' '--disable-netmap' '--disable-opengl' '--disable-oss' 
+'--disable-pa' '--disable-rbd' '--disable-sanitizers' '--disable-selinux' 
+'--disable-sparse' '--disable-strip' '--disable-vde' '--disable-vhost-crypto' 
+'--disable-vhost-user-blk-server' '--disable-virtfs' '--disable-whpx' 
+'--disable-xen' '--disable-attr' '--disable-kvm' '--disable-vhost-net' 
+'--disable-download' '--disable-hexagon-idef-parser' '--disable-system' 
+'--enable-linux-user' '--target-list=x86_64-linux-user' '--disable-vhost-user' 
+'--disable-slirp' '--disable-sdl' '--disable-fdt' '--enable-trace-backends=nop' 
+'--disable-tools' '--disable-guest-agent' '--disable-fuse' 
+'--disable-fuse-lseek' '--disable-seccomp' '--disable-libssh' 
+'--disable-libusb' '--disable-vnc' '--disable-nettle' '--disable-numa' 
+'--disable-pipewire' '--disable-spice' '--disable-usb-redir' 
+'--disable-install-blobs'
+
+Emulation of the same x86_64 code with qemu 6.2.0 installed on another x86_64 
+native machine works fine.
+
+[1]
+https://lists.nongnu.org/archive/html/qemu-devel/2023-11/msg05387.html
+Best regards,
+Petr
+
+On Sat, 25 Nov 2023 at 13:09, Petr Cvek <petrcvekcz@gmail.com> wrote:
+>
+>
+It seems there is a bug in SIGALRM handling when 486 system emulates x86_64
+>
+code.
+486 host is pretty well out of support currently. Can you reproduce
+this on a less ancient host CPU type ?
+
+>
+ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed:
+>
+(cpu == current_cpu)
+>
+Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
+>
+assertion failed: (cpu == current_cpu)
+>
+0x48874a != 0x3c69e10
+>
+**
+>
+ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed:
+>
+(cpu == current_cpu)
+>
+Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
+>
+assertion failed: (cpu == current_cpu)
+What compiler version do you build QEMU with? That
+assert is there because we have seen some buggy compilers
+in the past which don't correctly preserve the variable
+value as the setjmp/longjmp spec requires them to.
+
+thanks
+-- PMM
+
+Dne 27. 11. 23 v 10:37 Peter Maydell napsal(a):
+>
+On Sat, 25 Nov 2023 at 13:09, Petr Cvek <petrcvekcz@gmail.com> wrote:
+>
+>
+>
+> It seems there is a bug in SIGALRM handling when 486 system emulates x86_64
+>
+> code.
+>
+>
+486 host is pretty well out of support currently. Can you reproduce
+>
+this on a less ancient host CPU type ?
+>
+It seems it only fails when the code is compiled for i486. QEMU built with the 
+same compiler with -march=i586 and above runs on the same physical hardware 
+without a problem. All -march= variants were executed on ryzen 3600.
+
+>
+> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
+>
+> failed: (cpu == current_cpu)
+>
+> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
+>
+> assertion failed: (cpu == current_cpu)
+>
+> 0x48874a != 0x3c69e10
+>
+> **
+>
+> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
+>
+> failed: (cpu == current_cpu)
+>
+> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
+>
+> assertion failed: (cpu == current_cpu)
+>
+>
+What compiler version do you build QEMU with? That
+>
+assert is there because we have seen some buggy compilers
+>
+in the past which don't correctly preserve the variable
+>
+value as the setjmp/longjmp spec requires them to.
+>
+i486 and i586+ code variants were compiled with GCC 13.2.0 (more exactly, 
+slackware64 current multilib distribution).
+
+i486 binary which runs on the real 486 is also GCC 13.2.0 and installed as a 
+part of the buildroot crosscompiler (about two week old git snapshot).
+
+>
+thanks
+>
+-- PMM
+best regards,
+Petr
+
+On 11/25/23 07:08, Petr Cvek wrote:
+ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion failed: 
+(cpu == current_cpu)
+Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion 
+failed: (cpu == current_cpu)
+#
+
+The code fails either with or without -singlestep, the command line:
+
+/usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestep  /opt/x86_64/alarm.bin
+
+Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't use 
+RDTSC on i486" [1],
+with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now prints 
+current pointers of
+cpu and current_cpu (line "0x48874a != 0x3c69e10").
+If you try this again with 8.2-rc2, you should not see an assertion failure.
+You should see instead
+
+QEMU internal SIGILL {code=ILLOPC, addr=0x12345678}
+which I think more accurately summarizes the situation of attempting RDTSC on hardware
+that does not support it.
+r~
+
+Dne 29. 11. 23 v 15:25 Richard Henderson napsal(a):
+>
+On 11/25/23 07:08, Petr Cvek wrote:
+>
+> ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup: assertion
+>
+> failed: (cpu == current_cpu)
+>
+> Bail out! ERROR:../accel/tcg/cpu-exec.c:546:cpu_exec_longjmp_cleanup:
+>
+> assertion failed: (cpu == current_cpu)
+>
+> #
+>
+>
+>
+> The code fails either with or without -singlestep, the command line:
+>
+>
+>
+> /usr/bin/qemu-x86_64 -L /opt/x86_64 -strace -singlestepÂ
+>
+> /opt/x86_64/alarm.bin
+>
+>
+>
+> Source code of QEMU 8.1.1 was modified with patch "[PATCH] qemu/timer: Don't
+>
+> use RDTSC on i486" [1],
+>
+> with added few ioctls (not relevant) and cpu_exec_longjmp_cleanup() now
+>
+> prints current pointers of
+>
+> cpu and current_cpu (line "0x48874a != 0x3c69e10").
+>
+>
+>
+If you try this again with 8.2-rc2, you should not see an assertion failure.
+>
+You should see instead
+>
+>
+QEMU internal SIGILL {code=ILLOPC, addr=0x12345678}
+>
+>
+which I think more accurately summarizes the situation of attempting RDTSC on
+>
+hardware that does not support it.
+>
+>
+Compilation of vanilla qemu v8.2.0-rc2 with -march=i486 by GCC 13.2.0 and 
+running the resulting binary on ryzen still leads to:
+
+**
+ERROR:../accel/tcg/cpu-exec.c:533:cpu_exec_longjmp_cleanup: assertion failed: 
+(cpu == current_cpu)
+Bail out! ERROR:../accel/tcg/cpu-exec.c:533:cpu_exec_longjmp_cleanup: assertion 
+failed: (cpu == current_cpu)
+Aborted
+
+>
+>
+r~
+Petr
+
diff --git a/results/classifier/zero-shot/010/review/81775929 b/results/classifier/zero-shot/010/review/81775929
new file mode 100644
index 00000000..61755068
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/81775929
@@ -0,0 +1,259 @@
+other: 0.877
+permissions: 0.849
+PID: 0.847
+performance: 0.831
+vnc: 0.825
+semantic: 0.825
+graphic: 0.818
+KVM: 0.815
+socket: 0.810
+debug: 0.799
+files: 0.788
+device: 0.777
+network: 0.759
+boot: 0.742
+debug: 0.680
+files: 0.142
+PID: 0.132
+vnc: 0.098
+semantic: 0.092
+other: 0.065
+device: 0.062
+boot: 0.045
+performance: 0.034
+socket: 0.031
+KVM: 0.019
+network: 0.013
+permissions: 0.005
+graphic: 0.004
+
+[Qemu-devel] [BUG] Monitor QMP is broken ?
+
+Hello!
+
+ I have updated my qemu to the recent version and it seems to have lost 
+compatibility with
+libvirt. The error message is:
+--- cut ---
+internal error: unable to execute QEMU command 'qmp_capabilities': QMP input 
+object member
+'id' is unexpected
+--- cut ---
+ What does it mean? Is it intentional or not?
+
+Kind regards,
+Pavel Fedin
+Expert Engineer
+Samsung Electronics Research center Russia
+
+Hello! 
+
+>
+I have updated my qemu to the recent version and it seems to have lost
+>
+compatibility
+with
+>
+libvirt. The error message is:
+>
+--- cut ---
+>
+internal error: unable to execute QEMU command 'qmp_capabilities': QMP input
+>
+object
+>
+member
+>
+'id' is unexpected
+>
+--- cut ---
+>
+What does it mean? Is it intentional or not?
+I have found the problem. It is caused by commit
+65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to use the 
+removed
+asynchronous interface but it still feeds in JSONs with 'id' field set to 
+something. So i
+think the related fragment in qmp_check_input_obj() function should be brought 
+back
+
+Kind regards,
+Pavel Fedin
+Expert Engineer
+Samsung Electronics Research center Russia
+
+On Fri, Jun 05, 2015 at 04:58:46PM +0300, Pavel Fedin wrote:
+>
+Hello!
+>
+>
+>  I have updated my qemu to the recent version and it seems to have lost
+>
+> compatibility
+>
+with
+>
+> libvirt. The error message is:
+>
+> --- cut ---
+>
+> internal error: unable to execute QEMU command 'qmp_capabilities': QMP
+>
+> input object
+>
+> member
+>
+> 'id' is unexpected
+>
+> --- cut ---
+>
+>  What does it mean? Is it intentional or not?
+>
+>
+I have found the problem. It is caused by commit
+>
+65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to use the
+>
+removed
+>
+asynchronous interface but it still feeds in JSONs with 'id' field set to
+>
+something. So i
+>
+think the related fragment in qmp_check_input_obj() function should be
+>
+brought back
+If QMP is rejecting the 'id' parameter that is a regression bug.
+
+[quote]
+The QMP spec says
+
+2.3 Issuing Commands
+--------------------
+
+The format for command execution is:
+
+{ "execute": json-string, "arguments": json-object, "id": json-value }
+
+ Where,
+
+- The "execute" member identifies the command to be executed by the Server
+- The "arguments" member is used to pass any arguments required for the
+  execution of the command, it is optional when no arguments are
+  required. Each command documents what contents will be considered
+  valid when handling the json-argument
+- The "id" member is a transaction identification associated with the
+  command execution, it is optional and will be part of the response if
+  provided. The "id" member can be any json-value, although most
+  clients merely use a json-number incremented for each successive
+  command
+
+
+2.4 Commands Responses
+----------------------
+
+There are two possible responses which the Server will issue as the result
+of a command execution: success or error.
+
+2.4.1 success
+-------------
+
+The format of a success response is:
+
+{ "return": json-value, "id": json-value }
+
+ Where,
+
+- The "return" member contains the data returned by the command, which
+  is defined on a per-command basis (usually a json-object or
+  json-array of json-objects, but sometimes a json-number, json-string,
+  or json-array of json-strings); it is an empty json-object if the
+  command does not return data
+- The "id" member contains the transaction identification associated
+  with the command execution if issued by the Client
+
+[/quote]
+
+And as such, libvirt chose to /always/ send an 'id' parameter in all
+commands it issues.
+
+We don't however validate the id in the reply, though arguably we
+should have done so.
+
+Regards,
+Daniel
+-- 
+|:
+http://berrange.com
+-o-
+http://www.flickr.com/photos/dberrange/
+:|
+|:
+http://libvirt.org
+-o-
+http://virt-manager.org
+:|
+|:
+http://autobuild.org
+-o-
+http://search.cpan.org/~danberr/
+:|
+|:
+http://entangle-photo.org
+-o-
+http://live.gnome.org/gtk-vnc
+:|
+
+"Daniel P. Berrange" <address@hidden> writes:
+
+>
+On Fri, Jun 05, 2015 at 04:58:46PM +0300, Pavel Fedin wrote:
+>
+>  Hello!
+>
+>
+>
+> >  I have updated my qemu to the recent version and it seems to have
+>
+> > lost compatibility
+>
+> with
+>
+> > libvirt. The error message is:
+>
+> > --- cut ---
+>
+> > internal error: unable to execute QEMU command 'qmp_capabilities':
+>
+> > QMP input object
+>
+> > member
+>
+> > 'id' is unexpected
+>
+> > --- cut ---
+>
+> >  What does it mean? Is it intentional or not?
+>
+>
+>
+>  I have found the problem. It is caused by commit
+>
+> 65207c59d99f2260c5f1d3b9c491146616a522aa. libvirt does not seem to
+>
+> use the removed
+>
+> asynchronous interface but it still feeds in JSONs with 'id' field
+>
+> set to something. So i
+>
+> think the related fragment in qmp_check_input_obj() function should
+>
+> be brought back
+>
+>
+If QMP is rejecting the 'id' parameter that is a regression bug.
+It is definitely a regression, my fault, and I'll get it fixed a.s.a.p.
+
+[...]
+
diff --git a/results/classifier/zero-shot/010/review/85542195 b/results/classifier/zero-shot/010/review/85542195
new file mode 100644
index 00000000..b0ae7674
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/85542195
@@ -0,0 +1,144 @@
+permissions: 0.968
+PID: 0.945
+other: 0.944
+semantic: 0.941
+graphic: 0.938
+device: 0.936
+performance: 0.933
+boot: 0.932
+vnc: 0.923
+files: 0.920
+debug: 0.915
+socket: 0.905
+network: 0.899
+KVM: 0.898
+debug: 0.876
+PID: 0.322
+socket: 0.176
+boot: 0.169
+network: 0.127
+device: 0.126
+vnc: 0.121
+files: 0.088
+other: 0.049
+semantic: 0.024
+performance: 0.007
+permissions: 0.004
+KVM: 0.003
+graphic: 0.001
+
+[Qemu-devel] [Bug in qemu-system-ppc running Mac OS 9 on Windows 10]
+
+Hi all,
+
+I've been experiencing issues when installing Mac OS 9.x using
+qemu-system-ppc.exe in Windows 10. After booting from CD image,
+partitioning a fresh disk image often hangs Qemu. When using a
+pre-partitioned disk image, the OS installation process halts
+somewhere during the process. The issues can be resolved by setting
+qemu-system-ppc.exe to run in Windows 7 compatibility mode.
+AFAIK all Qemu builds for Windows since Mac OS 9 became available as
+guest are affected.
+The issue is reproducible by installing Qemu for Windows from Stephan
+Weil on Windows 10 and boot/install Mac OS 9.x
+
+Best regards and thanks for looking into this,
+Howard
+
+On Nov 25, 2016, at 9:26 AM, address@hidden wrote:
+Hi all,
+
+I've been experiencing issues when installing Mac OS 9.x using
+qemu-system-ppc.exe in Windows 10. After booting from CD image,
+partitioning a fresh disk image often hangs Qemu. When using a
+pre-partitioned disk image, the OS installation process halts
+somewhere during the process. The issues can be resolved by setting
+qemu-system-ppc.exe to run in Windows 7 compatibility mode.
+AFAIK all Qemu builds for Windows since Mac OS 9 became available as
+guest are affected.
+The issue is reproducible by installing Qemu for Windows from Stephan
+Weil on Windows 10 and boot/install Mac OS 9.x
+
+Best regards and thanks for looking into this,
+Howard
+I assume there was some kind of behavior change for some of the
+Windows API between Windows 7 and Windows 10, that is my guess as to
+why the compatibility mode works. Could you run 'make check' on your
+system, once in Windows 7 and once in Windows 10. Maybe the tests
+will tell us something. I'm hoping that one of the tests succeeds in
+Windows 7 and fails in Windows 10. That would help us pinpoint what
+the problem is.
+What I mean by run in Windows 7 is set the mingw environment to run
+in Windows 7 compatibility mode (if possible). If you have Windows 7
+on another partition you could boot from, that would be better.
+Good luck.
+p.s. use 'make check -k' to allow all the tests to run (even if one
+or more of the tests fails).
+
+>
+> Hi all,
+>
+>
+>
+> I've been experiencing issues when installing Mac OS 9.x using
+>
+> qemu-system-ppc.exe in Windows 10. After booting from CD image,
+>
+> partitioning a fresh disk image often hangs Qemu. When using a
+>
+> pre-partitioned disk image, the OS installation process halts
+>
+> somewhere during the process. The issues can be resolved by setting
+>
+> qemu-system-ppc.exe to run in Windows 7 compatibility mode.
+>
+> AFAIK all Qemu builds for Windows since Mac OS 9 became available as
+>
+> guest are affected.
+>
+> The issue is reproducible by installing Qemu for Windows from Stephan
+>
+> Weil on Windows 10 and boot/install Mac OS 9.x
+>
+>
+>
+> Best regards and thanks for looking into this,
+>
+> Howard
+>
+>
+>
+I assume there was some kind of behavior change for some of the Windows API
+>
+between Windows 7 and Windows 10, that is my guess as to why the
+>
+compatibility mode works. Could you run 'make check' on your system, once in
+>
+Windows 7 and once in Windows 10. Maybe the tests will tell us something.
+>
+I'm hoping that one of the tests succeeds in Windows 7 and fails in Windows
+>
+10. That would help us pinpoint what the problem is.
+>
+>
+What I mean by run in Windows 7 is set the mingw environment to run in
+>
+Windows 7 compatibility mode (if possible). If you have Windows 7 on another
+>
+partition you could boot from, that would be better.
+>
+>
+Good luck.
+>
+>
+p.s. use 'make check -k' to allow all the tests to run (even if one or more
+>
+of the tests fails).
+Hi,
+
+Thank you for you suggestion, but I have no means to run the check you
+suggest. I cross-compile from Linux.
+
+Best regards,
+Howard
+
diff --git a/results/classifier/zero-shot/010/review/88225572 b/results/classifier/zero-shot/010/review/88225572
new file mode 100644
index 00000000..d98d6b9b
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/88225572
@@ -0,0 +1,2924 @@
+permissions: 0.992
+other: 0.987
+debug: 0.986
+PID: 0.984
+semantic: 0.976
+graphic: 0.974
+device: 0.970
+boot: 0.969
+performance: 0.965
+vnc: 0.958
+files: 0.957
+socket: 0.955
+network: 0.950
+KVM: 0.924
+debug: 0.966
+KVM: 0.289
+PID: 0.087
+files: 0.078
+semantic: 0.039
+performance: 0.032
+device: 0.030
+other: 0.030
+network: 0.003
+vnc: 0.003
+graphic: 0.002
+socket: 0.002
+permissions: 0.001
+boot: 0.001
+
+[BUG qemu 4.0] segfault when unplugging virtio-blk-pci device
+
+Hi,
+
+I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+think it's because io completion hits use-after-free when device is
+already gone. Is this a known bug that has been fixed? (I went through
+the git log but didn't find anything obvious).
+
+gdb backtrace is:
+
+Core was generated by `/usr/local/libexec/qemu-kvm -name 
+sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+Program terminated with signal 11, Segmentation fault.
+#0 object_get_class (obj=obj@entry=0x0) at 
+/usr/src/debug/qemu-4.0/qom/object.c:903
+903        return obj->class;
+(gdb) bt
+#0  object_get_class (obj=obj@entry=0x0) at 
+/usr/src/debug/qemu-4.0/qom/object.c:903
+#1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+    vector=<optimized out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+#2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+    opaque=0x558a2f2fd420, ret=0)
+    at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+#3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+    at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+#4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+    i1=<optimized out>) at /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+#5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+#6  0x00007fff9ed75780 in ?? ()
+#7  0x0000000000000000 in ?? ()
+
+It seems like qemu was completing a discard/write_zero request, but
+parent BusState was already freed & set to NULL.
+
+Do we need to drain all pending request before unrealizing virtio-blk
+device? Like the following patch proposed?
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+If more info is needed, please let me know.
+
+Thanks,
+Eryu
+
+On Tue, 31 Dec 2019 18:34:34 +0800
+Eryu Guan <address@hidden> wrote:
+
+>
+Hi,
+>
+>
+I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+think it's because io completion hits use-after-free when device is
+>
+already gone. Is this a known bug that has been fixed? (I went through
+>
+the git log but didn't find anything obvious).
+>
+>
+gdb backtrace is:
+>
+>
+Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+Program terminated with signal 11, Segmentation fault.
+>
+#0 object_get_class (obj=obj@entry=0x0) at
+>
+/usr/src/debug/qemu-4.0/qom/object.c:903
+>
+903        return obj->class;
+>
+(gdb) bt
+>
+#0  object_get_class (obj=obj@entry=0x0) at
+>
+/usr/src/debug/qemu-4.0/qom/object.c:903
+>
+#1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+    vector=<optimized out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+#2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+    opaque=0x558a2f2fd420, ret=0)
+>
+    at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+#3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+    at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+#4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+    i1=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+#5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+#6  0x00007fff9ed75780 in ?? ()
+>
+#7  0x0000000000000000 in ?? ()
+>
+>
+It seems like qemu was completing a discard/write_zero request, but
+>
+parent BusState was already freed & set to NULL.
+>
+>
+Do we need to drain all pending request before unrealizing virtio-blk
+>
+device? Like the following patch proposed?
+>
+>
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+>
+If more info is needed, please let me know.
+may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+>
+Thanks,
+>
+Eryu
+>
+
+On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+On Tue, 31 Dec 2019 18:34:34 +0800
+>
+Eryu Guan <address@hidden> wrote:
+>
+>
+> Hi,
+>
+>
+>
+> I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+> think it's because io completion hits use-after-free when device is
+>
+> already gone. Is this a known bug that has been fixed? (I went through
+>
+> the git log but didn't find anything obvious).
+>
+>
+>
+> gdb backtrace is:
+>
+>
+>
+> Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> Program terminated with signal 11, Segmentation fault.
+>
+> #0 object_get_class (obj=obj@entry=0x0) at
+>
+> /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> 903        return obj->class;
+>
+> (gdb) bt
+>
+> #0  object_get_class (obj=obj@entry=0x0) at
+>
+> /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+>     vector=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+>     opaque=0x558a2f2fd420, ret=0)
+>
+>     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+>     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+>     i1=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> #6  0x00007fff9ed75780 in ?? ()
+>
+> #7  0x0000000000000000 in ?? ()
+>
+>
+>
+> It seems like qemu was completing a discard/write_zero request, but
+>
+> parent BusState was already freed & set to NULL.
+>
+>
+>
+> Do we need to drain all pending request before unrealizing virtio-blk
+>
+> device? Like the following patch proposed?
+>
+>
+>
+>
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+>
+>
+> If more info is needed, please let me know.
+>
+>
+may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+Yeah, this looks promising! I'll try it out (though it's a one-time
+crash for me). Thanks!
+
+Eryu
+
+On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> Eryu Guan <address@hidden> wrote:
+>
+>
+>
+> > Hi,
+>
+> >
+>
+> > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+> > think it's because io completion hits use-after-free when device is
+>
+> > already gone. Is this a known bug that has been fixed? (I went through
+>
+> > the git log but didn't find anything obvious).
+>
+> >
+>
+> > gdb backtrace is:
+>
+> >
+>
+> > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > Program terminated with signal 11, Segmentation fault.
+>
+> > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > 903        return obj->class;
+>
+> > (gdb) bt
+>
+> > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+> >     vector=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+> >     opaque=0x558a2f2fd420, ret=0)
+>
+> >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+> >     i1=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > #6  0x00007fff9ed75780 in ?? ()
+>
+> > #7  0x0000000000000000 in ?? ()
+>
+> >
+>
+> > It seems like qemu was completing a discard/write_zero request, but
+>
+> > parent BusState was already freed & set to NULL.
+>
+> >
+>
+> > Do we need to drain all pending request before unrealizing virtio-blk
+>
+> > device? Like the following patch proposed?
+>
+> >
+>
+> >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> >
+>
+> > If more info is needed, please let me know.
+>
+>
+>
+> may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+>
+Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+crash for me). Thanks!
+After applying this patch, I don't see the original segfaut and
+backtrace, but I see this crash
+
+[Thread debugging using libthread_db enabled]
+Using host libthread_db library "/lib64/libthread_db.so.1".
+Core was generated by `/usr/local/libexec/qemu-kvm -name 
+sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+Program terminated with signal 11, Segmentation fault.
+#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0, 
+addr=0, val=<optimized out>, size=<optimized out>) at 
+/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+1324        VirtIOPCIProxy *proxy = 
+VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+Missing separate debuginfos, use: debuginfo-install 
+glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64 
+libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64 
+libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64 
+pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+(gdb) bt
+#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0, 
+addr=0, val=<optimized out>, size=<optimized out>) at 
+/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+#1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>, 
+addr=<optimized out>, value=<optimized out>, size=<optimized out>, 
+shift=<optimized out>, mask=<optimized out>, attrs=...) at 
+/usr/src/debug/qemu-4.0/memory.c:502
+#2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0, 
+value=value@entry=0x7fcdeab1b8a8, size=size@entry=2, access_size_min=<optimized 
+out>, access_size_max=<optimized out>, access_fn=0x561216835ac0 
+<memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
+    at /usr/src/debug/qemu-4.0/memory.c:568
+#3  0x0000561216837c66 in memory_region_dispatch_write 
+(mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2, 
+attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+#4  0x00005612167e036f in flatview_write_continue (fv=fv@entry=0x56121852edd0, 
+addr=addr@entry=841813602304, attrs=..., buf=buf@entry=0x7fce7dd97028 <Address 
+0x7fce7dd97028 out of bounds>, len=len@entry=2, addr1=<optimized out>, 
+l=<optimized out>, mr=0x56121846d340)
+    at /usr/src/debug/qemu-4.0/exec.c:3279
+#5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0, addr=841813602304, 
+attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>, len=2) at 
+/usr/src/debug/qemu-4.0/exec.c:3318
+#6  0x00005612167e4a1b in address_space_write (as=<optimized out>, 
+addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>) at 
+/usr/src/debug/qemu-4.0/exec.c:3408
+#7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>, addr=<optimized 
+out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fce7dd97028 <Address 
+0x7fce7dd97028 out of bounds>, len=<optimized out>, is_write=<optimized out>) 
+at /usr/src/debug/qemu-4.0/exec.c:3419
+#8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at 
+/usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+#9  0x000056121682255e in qemu_kvm_cpu_thread_fn (arg=arg@entry=0x56121849aa00) 
+at /usr/src/debug/qemu-4.0/cpus.c:1281
+#10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at 
+/usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+#11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+#12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+
+And I searched and found
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+bug.
+
+But I can still hit the bug even after applying the commit. Do I miss
+anything?
+
+Thanks,
+Eryu
+>
+Eryu
+
+On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+>
+On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > Eryu Guan <address@hidden> wrote:
+>
+> >
+>
+> > > Hi,
+>
+> > >
+>
+> > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+> > > think it's because io completion hits use-after-free when device is
+>
+> > > already gone. Is this a known bug that has been fixed? (I went through
+>
+> > > the git log but didn't find anything obvious).
+>
+> > >
+>
+> > > gdb backtrace is:
+>
+> > >
+>
+> > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > Program terminated with signal 11, Segmentation fault.
+>
+> > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > 903        return obj->class;
+>
+> > > (gdb) bt
+>
+> > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+> > >     vector=<optimized out>) at
+>
+> > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+> > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+> > >     i1=<optimized out>) at
+>
+> > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > #7  0x0000000000000000 in ?? ()
+>
+> > >
+>
+> > > It seems like qemu was completing a discard/write_zero request, but
+>
+> > > parent BusState was already freed & set to NULL.
+>
+> > >
+>
+> > > Do we need to drain all pending request before unrealizing virtio-blk
+>
+> > > device? Like the following patch proposed?
+>
+> > >
+>
+> > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > >
+>
+> > > If more info is needed, please let me know.
+>
+> >
+>
+> > may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+>
+>
+> Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> crash for me). Thanks!
+>
+>
+After applying this patch, I don't see the original segfaut and
+>
+backtrace, but I see this crash
+>
+>
+[Thread debugging using libthread_db enabled]
+>
+Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+Program terminated with signal 11, Segmentation fault.
+>
+#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+addr=0, val=<optimized out>, size=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+1324        VirtIOPCIProxy *proxy =
+>
+VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+Missing separate debuginfos, use: debuginfo-install
+>
+glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+(gdb) bt
+>
+#0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+addr=0, val=<optimized out>, size=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+#1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
+>
+addr=<optimized out>, value=<optimized out>, size=<optimized out>,
+>
+shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+/usr/src/debug/qemu-4.0/memory.c:502
+>
+#2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
+>
+value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
+>
+access_size_min=<optimized out>, access_size_max=<optimized out>,
+>
+access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
+>
+attrs=...)
+>
+at /usr/src/debug/qemu-4.0/memory.c:568
+>
+#3  0x0000561216837c66 in memory_region_dispatch_write
+>
+(mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+#4  0x00005612167e036f in flatview_write_continue
+>
+(fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+len=len@entry=2, addr1=<optimized out>, l=<optimized out>, mr=0x56121846d340)
+>
+at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+#5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028 out
+>
+of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
+>
+#6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/exec.c:3408
+>
+#7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+len=<optimized out>, is_write=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/exec.c:3419
+>
+#8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
+>
+/usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+#9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+(arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+#10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+/usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+#11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+#12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+>
+And I searched and found
+>
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+>
+backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+>
+bug.
+>
+>
+But I can still hit the bug even after applying the commit. Do I miss
+>
+anything?
+Hi Eryu,
+This backtrace seems to be caused by this bug (there were two bugs in
+1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+Although the solution hasn't been tested on virtio-blk yet, you may
+want to apply this patch:
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+Let me know if this works.
+
+Best regards, Julia Suvorova.
+
+On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+>
+>
+> On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > Eryu Guan <address@hidden> wrote:
+>
+> > >
+>
+> > > > Hi,
+>
+> > > >
+>
+> > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+> > > > think it's because io completion hits use-after-free when device is
+>
+> > > > already gone. Is this a known bug that has been fixed? (I went through
+>
+> > > > the git log but didn't find anything obvious).
+>
+> > > >
+>
+> > > > gdb backtrace is:
+>
+> > > >
+>
+> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > 903        return obj->class;
+>
+> > > > (gdb) bt
+>
+> > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+> > > >     vector=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+> > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+> > > >     i1=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > #7  0x0000000000000000 in ?? ()
+>
+> > > >
+>
+> > > > It seems like qemu was completing a discard/write_zero request, but
+>
+> > > > parent BusState was already freed & set to NULL.
+>
+> > > >
+>
+> > > > Do we need to drain all pending request before unrealizing virtio-blk
+>
+> > > > device? Like the following patch proposed?
+>
+> > > >
+>
+> > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > >
+>
+> > > > If more info is needed, please let me know.
+>
+> > >
+>
+> > > may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+> >
+>
+> > Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> > crash for me). Thanks!
+>
+>
+>
+> After applying this patch, I don't see the original segfaut and
+>
+> backtrace, but I see this crash
+>
+>
+>
+> [Thread debugging using libthread_db enabled]
+>
+> Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> Program terminated with signal 11, Segmentation fault.
+>
+> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> 1324        VirtIOPCIProxy *proxy =
+>
+> VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> Missing separate debuginfos, use: debuginfo-install
+>
+> glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+> pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+> (gdb) bt
+>
+> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
+>
+> addr=<optimized out>, value=<optimized out>, size=<optimized out>,
+>
+> shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+> /usr/src/debug/qemu-4.0/memory.c:502
+>
+> #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
+>
+> value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
+>
+> access_size_min=<optimized out>, access_size_max=<optimized out>,
+>
+> access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
+>
+> attrs=...)
+>
+>     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> #4  0x00005612167e036f in flatview_write_continue
+>
+> (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
+>
+> mr=0x56121846d340)
+>
+>     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
+>
+> out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>)
+>
+> at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> len=<optimized out>, is_write=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
+>
+> /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+> #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+>
+>
+> And I searched and found
+>
+>
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+>
+> backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+> blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+>
+> bug.
+>
+>
+>
+> But I can still hit the bug even after applying the commit. Do I miss
+>
+> anything?
+>
+>
+Hi Eryu,
+>
+This backtrace seems to be caused by this bug (there were two bugs in
+>
+1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+Although the solution hasn't been tested on virtio-blk yet, you may
+>
+want to apply this patch:
+>
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+Let me know if this works.
+Will try it out, thanks a lot!
+
+Eryu
+
+On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+>
+>
+> On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > Eryu Guan <address@hidden> wrote:
+>
+> > >
+>
+> > > > Hi,
+>
+> > > >
+>
+> > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox, I
+>
+> > > > think it's because io completion hits use-after-free when device is
+>
+> > > > already gone. Is this a known bug that has been fixed? (I went through
+>
+> > > > the git log but didn't find anything obvious).
+>
+> > > >
+>
+> > > > gdb backtrace is:
+>
+> > > >
+>
+> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > 903        return obj->class;
+>
+> > > > (gdb) bt
+>
+> > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+> > > >     vector=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+> > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+> > > >     i1=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > #7  0x0000000000000000 in ?? ()
+>
+> > > >
+>
+> > > > It seems like qemu was completing a discard/write_zero request, but
+>
+> > > > parent BusState was already freed & set to NULL.
+>
+> > > >
+>
+> > > > Do we need to drain all pending request before unrealizing virtio-blk
+>
+> > > > device? Like the following patch proposed?
+>
+> > > >
+>
+> > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > >
+>
+> > > > If more info is needed, please let me know.
+>
+> > >
+>
+> > > may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+> >
+>
+> > Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> > crash for me). Thanks!
+>
+>
+>
+> After applying this patch, I don't see the original segfaut and
+>
+> backtrace, but I see this crash
+>
+>
+>
+> [Thread debugging using libthread_db enabled]
+>
+> Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> Program terminated with signal 11, Segmentation fault.
+>
+> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> 1324        VirtIOPCIProxy *proxy =
+>
+> VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> Missing separate debuginfos, use: debuginfo-install
+>
+> glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+> pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+> (gdb) bt
+>
+> #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized out>,
+>
+> addr=<optimized out>, value=<optimized out>, size=<optimized out>,
+>
+> shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+> /usr/src/debug/qemu-4.0/memory.c:502
+>
+> #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
+>
+> value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
+>
+> access_size_min=<optimized out>, access_size_max=<optimized out>,
+>
+> access_fn=0x561216835ac0 <memory_region_write_accessor>, mr=0x56121846d340,
+>
+> attrs=...)
+>
+>     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> #4  0x00005612167e036f in flatview_write_continue
+>
+> (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
+>
+> mr=0x56121846d340)
+>
+>     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
+>
+> out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized out>)
+>
+> at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> len=<optimized out>, is_write=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
+>
+> /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+> /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+> #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+>
+>
+> And I searched and found
+>
+>
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+>
+> backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+> blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+>
+> bug.
+>
+>
+>
+> But I can still hit the bug even after applying the commit. Do I miss
+>
+> anything?
+>
+>
+Hi Eryu,
+>
+This backtrace seems to be caused by this bug (there were two bugs in
+>
+1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+Although the solution hasn't been tested on virtio-blk yet, you may
+>
+want to apply this patch:
+>
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+Let me know if this works.
+Unfortunately, I still see the same segfault & backtrace after applying
+commit 421afd2fe8dd ("virtio: reset region cache when on queue
+deletion")
+
+Anything I can help to debug?
+
+Thanks,
+Eryu
+
+On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
+>
+On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+> On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+> >
+>
+> > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > > Eryu Guan <address@hidden> wrote:
+>
+> > > >
+>
+> > > > > Hi,
+>
+> > > > >
+>
+> > > > > I'm using qemu 4.0 and hit segfault when tearing down kata sandbox,
+>
+> > > > > I
+>
+> > > > > think it's because io completion hits use-after-free when device is
+>
+> > > > > already gone. Is this a known bug that has been fixed? (I went
+>
+> > > > > through
+>
+> > > > > the git log but didn't find anything obvious).
+>
+> > > > >
+>
+> > > > > gdb backtrace is:
+>
+> > > > >
+>
+> > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > 903        return obj->class;
+>
+> > > > > (gdb) bt
+>
+> > > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > #1  0x0000558a2c009e9b in virtio_notify_vector (vdev=0x558a2e7751d0,
+>
+> > > > >     vector=<optimized out>) at
+>
+> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > > #2  0x0000558a2bfdcb1e in virtio_blk_discard_write_zeroes_complete (
+>
+> > > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized out>,
+>
+> > > > >     i1=<optimized out>) at
+>
+> > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > > #7  0x0000000000000000 in ?? ()
+>
+> > > > >
+>
+> > > > > It seems like qemu was completing a discard/write_zero request, but
+>
+> > > > > parent BusState was already freed & set to NULL.
+>
+> > > > >
+>
+> > > > > Do we need to drain all pending request before unrealizing
+>
+> > > > > virtio-blk
+>
+> > > > > device? Like the following patch proposed?
+>
+> > > > >
+>
+> > > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > > >
+>
+> > > > > If more info is needed, please let me know.
+>
+> > > >
+>
+> > > > may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+> > >
+>
+> > > Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> > > crash for me). Thanks!
+>
+> >
+>
+> > After applying this patch, I don't see the original segfaut and
+>
+> > backtrace, but I see this crash
+>
+> >
+>
+> > [Thread debugging using libthread_db enabled]
+>
+> > Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> > Program terminated with signal 11, Segmentation fault.
+>
+> > #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> > addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > 1324        VirtIOPCIProxy *proxy =
+>
+> > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> > Missing separate debuginfos, use: debuginfo-install
+>
+> > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> > libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+> > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+> > (gdb) bt
+>
+> > #0  0x0000561216a57609 in virtio_pci_notify_write (opaque=0x5612184747e0,
+>
+> > addr=0, val=<optimized out>, size=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
+>
+> > out>, addr=<optimized out>, value=<optimized out>, size=<optimized out>,
+>
+> > shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+> > /usr/src/debug/qemu-4.0/memory.c:502
+>
+> > #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
+>
+> > value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
+>
+> > access_size_min=<optimized out>, access_size_max=<optimized out>,
+>
+> > access_fn=0x561216835ac0 <memory_region_write_accessor>,
+>
+> > mr=0x56121846d340, attrs=...)
+>
+> >     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> > #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> > #4  0x00005612167e036f in flatview_write_continue
+>
+> > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+> > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
+>
+> > mr=0x56121846d340)
+>
+> >     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address 0x7fce7dd97028
+>
+> > out of bounds>, len=2) at /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
+>
+> > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> > addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > len=<optimized out>, is_write=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00) at
+>
+> > /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+> > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+> > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+> >
+>
+> > And I searched and found
+>
+> >
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+>
+> > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+> > blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+>
+> > bug.
+>
+> >
+>
+> > But I can still hit the bug even after applying the commit. Do I miss
+>
+> > anything?
+>
+>
+>
+> Hi Eryu,
+>
+> This backtrace seems to be caused by this bug (there were two bugs in
+>
+> 1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+> Although the solution hasn't been tested on virtio-blk yet, you may
+>
+> want to apply this patch:
+>
+>
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+> Let me know if this works.
+>
+>
+Unfortunately, I still see the same segfault & backtrace after applying
+>
+commit 421afd2fe8dd ("virtio: reset region cache when on queue
+>
+deletion")
+>
+>
+Anything I can help to debug?
+Please post the QEMU command-line and the QMP commands use to remove the
+device.
+
+The backtrace shows a vcpu thread submitting a request.  The device
+seems to be partially destroyed.  That's surprising because the monitor
+and the vcpu thread should use the QEMU global mutex to avoid race
+conditions.  Maybe seeing the QMP commands will make it clearer...
+
+Stefan
+signature.asc
+Description:
+PGP signature
+
+On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
+>
+On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
+>
+> On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+> > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+> > >
+>
+> > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > > > Eryu Guan <address@hidden> wrote:
+>
+> > > > >
+>
+> > > > > > Hi,
+>
+> > > > > >
+>
+> > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
+>
+> > > > > > sandbox, I
+>
+> > > > > > think it's because io completion hits use-after-free when device
+>
+> > > > > > is
+>
+> > > > > > already gone. Is this a known bug that has been fixed? (I went
+>
+> > > > > > through
+>
+> > > > > > the git log but didn't find anything obvious).
+>
+> > > > > >
+>
+> > > > > > gdb backtrace is:
+>
+> > > > > >
+>
+> > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > 903        return obj->class;
+>
+> > > > > > (gdb) bt
+>
+> > > > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
+>
+> > > > > > (vdev=0x558a2e7751d0,
+>
+> > > > > >     vector=<optimized out>) at
+>
+> > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > > > #2  0x0000558a2bfdcb1e in
+>
+> > > > > > virtio_blk_discard_write_zeroes_complete (
+>
+> > > > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
+>
+> > > > > > out>,
+>
+> > > > > >     i1=<optimized out>) at
+>
+> > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > > > #7  0x0000000000000000 in ?? ()
+>
+> > > > > >
+>
+> > > > > > It seems like qemu was completing a discard/write_zero request,
+>
+> > > > > > but
+>
+> > > > > > parent BusState was already freed & set to NULL.
+>
+> > > > > >
+>
+> > > > > > Do we need to drain all pending request before unrealizing
+>
+> > > > > > virtio-blk
+>
+> > > > > > device? Like the following patch proposed?
+>
+> > > > > >
+>
+> > > > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > > > >
+>
+> > > > > > If more info is needed, please let me know.
+>
+> > > > >
+>
+> > > > > may be this will help:
+https://patchwork.kernel.org/patch/11213047/
+>
+> > > >
+>
+> > > > Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> > > > crash for me). Thanks!
+>
+> > >
+>
+> > > After applying this patch, I don't see the original segfaut and
+>
+> > > backtrace, but I see this crash
+>
+> > >
+>
+> > > [Thread debugging using libthread_db enabled]
+>
+> > > Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> > > Program terminated with signal 11, Segmentation fault.
+>
+> > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
+>
+> > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > 1324        VirtIOPCIProxy *proxy =
+>
+> > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> > > Missing separate debuginfos, use: debuginfo-install
+>
+> > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> > > libstdc++-4.8.5-28.alios7.1.x86_64 numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+> > > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+> > > (gdb) bt
+>
+> > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
+>
+> > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
+>
+> > > out>, addr=<optimized out>, value=<optimized out>, size=<optimized
+>
+> > > out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+> > > /usr/src/debug/qemu-4.0/memory.c:502
+>
+> > > #2  0x0000561216833c5d in access_with_adjusted_size (addr=addr@entry=0,
+>
+> > > value=value@entry=0x7fcdeab1b8a8, size=size@entry=2,
+>
+> > > access_size_min=<optimized out>, access_size_max=<optimized out>,
+>
+> > > access_fn=0x561216835ac0 <memory_region_write_accessor>,
+>
+> > > mr=0x56121846d340, attrs=...)
+>
+> > >     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> > > #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> > > #4  0x00005612167e036f in flatview_write_continue
+>
+> > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+> > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
+>
+> > > mr=0x56121846d340)
+>
+> > >     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
+>
+> > > 0x7fce7dd97028 out of bounds>, len=2) at
+>
+> > > /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> > > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
+>
+> > > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> > > addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > > len=<optimized out>, is_write=<optimized out>) at
+>
+> > > /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> > > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00)
+>
+> > > at /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> > > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+> > > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> > > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+> > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+> > >
+>
+> > > And I searched and found
+>
+> > >
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the same
+>
+> > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+> > > blk_drain() to virtio_blk_device_unrealize()") is to fix this particular
+>
+> > > bug.
+>
+> > >
+>
+> > > But I can still hit the bug even after applying the commit. Do I miss
+>
+> > > anything?
+>
+> >
+>
+> > Hi Eryu,
+>
+> > This backtrace seems to be caused by this bug (there were two bugs in
+>
+> > 1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+> > Although the solution hasn't been tested on virtio-blk yet, you may
+>
+> > want to apply this patch:
+>
+> >
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+> > Let me know if this works.
+>
+>
+>
+> Unfortunately, I still see the same segfault & backtrace after applying
+>
+> commit 421afd2fe8dd ("virtio: reset region cache when on queue
+>
+> deletion")
+>
+>
+>
+> Anything I can help to debug?
+>
+>
+Please post the QEMU command-line and the QMP commands use to remove the
+>
+device.
+It's a normal kata instance using virtio-fs as rootfs.
+
+/usr/local/libexec/qemu-kvm -name 
+sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
+ -uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine 
+q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
+ -cpu host -qmp 
+unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+ \
+ -qmp 
+unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+ \
+ -m 2048M,slots=10,maxmem=773893M -device 
+pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
+ -device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device 
+virtconsole,chardev=charconsole0,id=console0 \
+ -chardev 
+socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
+ \
+ -device 
+virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10 \
+ -chardev 
+socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
+ \
+ -device nvdimm,id=nv0,memdev=mem0 -object 
+memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
+ \
+ -object rng-random,id=rng0,filename=/dev/urandom -device 
+virtio-rng,rng=rng0,romfile= \
+ -device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
+ -chardev 
+socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
+ \
+ -chardev 
+socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
+ \
+ -device 
+vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M 
+-netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
+ -device 
+driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
+ \
+ -global kvm-pit.lost_tick_policy=discard -vga none -no-user-config -nodefaults 
+-nographic -daemonize \
+ -object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on 
+-numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
+ -append tsc=reliable no_timer_check rcupdate.rcu_expedited=1 i8042.direct=1 
+i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp reboot=k console=hvc0 
+console=hvc1 iommu=off cryptomgr.notests net.ifnames=0 pci=lastbus=0 
+root=/dev/pmem0p1 rootflags=dax,data=ordered,errors=remount-ro ro 
+rootfstype=ext4 quiet systemd.show_status=false panic=1 nr_cpus=96 
+agent.use_vsock=false init=/usr/lib/systemd/systemd 
+systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service 
+systemd.mask=systemd-networkd.socket \
+ -pidfile 
+/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid 
+\
+ -smp 1,cores=1,threads=1,sockets=96,maxcpus=96
+
+QMP command to delete device (the device id is just an example, not the
+one caused the crash):
+
+"{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
+
+which has been hot plugged by:
+"{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
+"{\"return\": {}}"
+"{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
+"{\"return\": {}}"
+
+>
+>
+The backtrace shows a vcpu thread submitting a request.  The device
+>
+seems to be partially destroyed.  That's surprising because the monitor
+>
+and the vcpu thread should use the QEMU global mutex to avoid race
+>
+conditions.  Maybe seeing the QMP commands will make it clearer...
+>
+>
+Stefan
+Thanks!
+
+Eryu
+
+On Tue, Jan 14, 2020 at 10:50:58AM +0800, Eryu Guan wrote:
+>
+On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
+>
+> On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
+>
+> > On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+> > > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+> > > >
+>
+> > > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > > > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > > > > Eryu Guan <address@hidden> wrote:
+>
+> > > > > >
+>
+> > > > > > > Hi,
+>
+> > > > > > >
+>
+> > > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
+>
+> > > > > > > sandbox, I
+>
+> > > > > > > think it's because io completion hits use-after-free when
+>
+> > > > > > > device is
+>
+> > > > > > > already gone. Is this a known bug that has been fixed? (I went
+>
+> > > > > > > through
+>
+> > > > > > > the git log but didn't find anything obvious).
+>
+> > > > > > >
+>
+> > > > > > > gdb backtrace is:
+>
+> > > > > > >
+>
+> > > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > > 903        return obj->class;
+>
+> > > > > > > (gdb) bt
+>
+> > > > > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
+>
+> > > > > > > (vdev=0x558a2e7751d0,
+>
+> > > > > > >     vector=<optimized out>) at
+>
+> > > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > > > > #2  0x0000558a2bfdcb1e in
+>
+> > > > > > > virtio_blk_discard_write_zeroes_complete (
+>
+> > > > > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > > > > #3  0x0000558a2c261c7e in blk_aio_complete (acb=0x558a2eed7420)
+>
+> > > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
+>
+> > > > > > > out>,
+>
+> > > > > > >     i1=<optimized out>) at
+>
+> > > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > > > > #7  0x0000000000000000 in ?? ()
+>
+> > > > > > >
+>
+> > > > > > > It seems like qemu was completing a discard/write_zero request,
+>
+> > > > > > > but
+>
+> > > > > > > parent BusState was already freed & set to NULL.
+>
+> > > > > > >
+>
+> > > > > > > Do we need to drain all pending request before unrealizing
+>
+> > > > > > > virtio-blk
+>
+> > > > > > > device? Like the following patch proposed?
+>
+> > > > > > >
+>
+> > > > > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > > > > >
+>
+> > > > > > > If more info is needed, please let me know.
+>
+> > > > > >
+>
+> > > > > > may be this will help:
+>
+> > > > > >
+https://patchwork.kernel.org/patch/11213047/
+>
+> > > > >
+>
+> > > > > Yeah, this looks promising! I'll try it out (though it's a one-time
+>
+> > > > > crash for me). Thanks!
+>
+> > > >
+>
+> > > > After applying this patch, I don't see the original segfaut and
+>
+> > > > backtrace, but I see this crash
+>
+> > > >
+>
+> > > > [Thread debugging using libthread_db enabled]
+>
+> > > > Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
+>
+> > > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > > 1324        VirtIOPCIProxy *proxy =
+>
+> > > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> > > > Missing separate debuginfos, use: debuginfo-install
+>
+> > > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> > > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> > > > libstdc++-4.8.5-28.alios7.1.x86_64
+>
+> > > > numactl-libs-2.0.9-5.1.alios7.x86_64 pixman-0.32.6-3.1.alios7.x86_64
+>
+> > > > zlib-1.2.7-16.2.alios7.x86_64
+>
+> > > > (gdb) bt
+>
+> > > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>, size=<optimized
+>
+> > > > out>) at /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > > #1  0x0000561216835b22 in memory_region_write_accessor (mr=<optimized
+>
+> > > > out>, addr=<optimized out>, value=<optimized out>, size=<optimized
+>
+> > > > out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at
+>
+> > > > /usr/src/debug/qemu-4.0/memory.c:502
+>
+> > > > #2  0x0000561216833c5d in access_with_adjusted_size
+>
+> > > > (addr=addr@entry=0, value=value@entry=0x7fcdeab1b8a8,
+>
+> > > > size=size@entry=2, access_size_min=<optimized out>,
+>
+> > > > access_size_max=<optimized out>, access_fn=0x561216835ac0
+>
+> > > > <memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
+>
+> > > >     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> > > > #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> > > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> > > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> > > > #4  0x00005612167e036f in flatview_write_continue
+>
+> > > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304, attrs=...,
+>
+> > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > > > len=len@entry=2, addr1=<optimized out>, l=<optimized out>,
+>
+> > > > mr=0x56121846d340)
+>
+> > > >     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> > > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> > > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
+>
+> > > > 0x7fce7dd97028 out of bounds>, len=2) at
+>
+> > > > /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> > > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> > > > addr=<optimized out>, attrs=..., buf=<optimized out>, len=<optimized
+>
+> > > > out>) at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> > > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> > > > addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of bounds>,
+>
+> > > > len=<optimized out>, is_write=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> > > > #8  0x0000561216849da1 in kvm_cpu_exec (cpu=cpu@entry=0x56121849aa00)
+>
+> > > > at /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> > > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> > > > (arg=arg@entry=0x56121849aa00) at /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> > > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>) at
+>
+> > > > /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> > > > #11 0x00007fce7bef6e25 in start_thread () from /lib64/libpthread.so.0
+>
+> > > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+> > > >
+>
+> > > > And I searched and found
+>
+> > > >
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the
+>
+> > > > same
+>
+> > > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk: Add
+>
+> > > > blk_drain() to virtio_blk_device_unrealize()") is to fix this
+>
+> > > > particular
+>
+> > > > bug.
+>
+> > > >
+>
+> > > > But I can still hit the bug even after applying the commit. Do I miss
+>
+> > > > anything?
+>
+> > >
+>
+> > > Hi Eryu,
+>
+> > > This backtrace seems to be caused by this bug (there were two bugs in
+>
+> > > 1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+> > > Although the solution hasn't been tested on virtio-blk yet, you may
+>
+> > > want to apply this patch:
+>
+> > >
+>
+> > >
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+> > > Let me know if this works.
+>
+> >
+>
+> > Unfortunately, I still see the same segfault & backtrace after applying
+>
+> > commit 421afd2fe8dd ("virtio: reset region cache when on queue
+>
+> > deletion")
+>
+> >
+>
+> > Anything I can help to debug?
+>
+>
+>
+> Please post the QEMU command-line and the QMP commands use to remove the
+>
+> device.
+>
+>
+It's a normal kata instance using virtio-fs as rootfs.
+>
+>
+/usr/local/libexec/qemu-kvm -name
+>
+sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
+>
+-uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine
+>
+q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
+>
+-cpu host -qmp
+>
+unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+>
+\
+>
+-qmp
+>
+unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+>
+\
+>
+-m 2048M,slots=10,maxmem=773893M -device
+>
+pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
+>
+-device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device
+>
+virtconsole,chardev=charconsole0,id=console0 \
+>
+-chardev
+>
+socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
+>
+\
+>
+-device
+>
+virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10 \
+>
+-chardev
+>
+socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
+>
+\
+>
+-device nvdimm,id=nv0,memdev=mem0 -object
+>
+memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
+>
+\
+>
+-object rng-random,id=rng0,filename=/dev/urandom -device
+>
+virtio-rng,rng=rng0,romfile= \
+>
+-device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
+>
+-chardev
+>
+socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
+>
+\
+>
+-chardev
+>
+socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
+>
+\
+>
+-device
+>
+vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M
+>
+-netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
+>
+-device
+>
+driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
+>
+\
+>
+-global kvm-pit.lost_tick_policy=discard -vga none -no-user-config
+>
+-nodefaults -nographic -daemonize \
+>
+-object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on
+>
+-numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
+>
+-append tsc=reliable no_timer_check rcupdate.rcu_expedited=1 i8042.direct=1
+>
+i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp reboot=k
+>
+console=hvc0 console=hvc1 iommu=off cryptomgr.notests net.ifnames=0
+>
+pci=lastbus=0 root=/dev/pmem0p1 rootflags=dax,data=ordered,errors=remount-ro
+>
+ro rootfstype=ext4 quiet systemd.show_status=false panic=1 nr_cpus=96
+>
+agent.use_vsock=false init=/usr/lib/systemd/systemd
+>
+systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service
+>
+systemd.mask=systemd-networkd.socket \
+>
+-pidfile
+>
+/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid
+>
+\
+>
+-smp 1,cores=1,threads=1,sockets=96,maxcpus=96
+>
+>
+QMP command to delete device (the device id is just an example, not the
+>
+one caused the crash):
+>
+>
+"{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
+>
+>
+which has been hot plugged by:
+>
+"{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
+>
+"{\"return\": {}}"
+>
+"{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
+>
+"{\"return\": {}}"
+Thanks.  I wasn't able to reproduce this crash with qemu.git/master.
+
+One thing that is strange about the latest backtrace you posted: QEMU is
+dispatching the memory access instead of using the ioeventfd code that
+that virtio-blk-pci normally takes when a virtqueue is notified.  I
+guess this means ioeventfd has already been disabled due to the hot
+unplug.
+
+Could you try with machine type "i440fx" instead of "q35"?  I wonder if
+pci-bridge/shpc is part of the problem.
+
+Stefan
+signature.asc
+Description:
+PGP signature
+
+On Tue, Jan 14, 2020 at 04:16:24PM +0000, Stefan Hajnoczi wrote:
+>
+On Tue, Jan 14, 2020 at 10:50:58AM +0800, Eryu Guan wrote:
+>
+> On Mon, Jan 13, 2020 at 04:38:55PM +0000, Stefan Hajnoczi wrote:
+>
+> > On Thu, Jan 09, 2020 at 12:58:06PM +0800, Eryu Guan wrote:
+>
+> > > On Tue, Jan 07, 2020 at 03:01:01PM +0100, Julia Suvorova wrote:
+>
+> > > > On Tue, Jan 7, 2020 at 2:06 PM Eryu Guan <address@hidden> wrote:
+>
+> > > > >
+>
+> > > > > On Thu, Jan 02, 2020 at 10:08:50AM +0800, Eryu Guan wrote:
+>
+> > > > > > On Tue, Dec 31, 2019 at 11:51:35AM +0100, Igor Mammedov wrote:
+>
+> > > > > > > On Tue, 31 Dec 2019 18:34:34 +0800
+>
+> > > > > > > Eryu Guan <address@hidden> wrote:
+>
+> > > > > > >
+>
+> > > > > > > > Hi,
+>
+> > > > > > > >
+>
+> > > > > > > > I'm using qemu 4.0 and hit segfault when tearing down kata
+>
+> > > > > > > > sandbox, I
+>
+> > > > > > > > think it's because io completion hits use-after-free when
+>
+> > > > > > > > device is
+>
+> > > > > > > > already gone. Is this a known bug that has been fixed? (I
+>
+> > > > > > > > went through
+>
+> > > > > > > > the git log but didn't find anything obvious).
+>
+> > > > > > > >
+>
+> > > > > > > > gdb backtrace is:
+>
+> > > > > > > >
+>
+> > > > > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > > > > > sandbox-5b8df8c6c6901c3c0a9b02879be10fe8d69d6'.
+>
+> > > > > > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > > > > > #0 object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > > > 903        return obj->class;
+>
+> > > > > > > > (gdb) bt
+>
+> > > > > > > > #0  object_get_class (obj=obj@entry=0x0) at
+>
+> > > > > > > > /usr/src/debug/qemu-4.0/qom/object.c:903
+>
+> > > > > > > > #1  0x0000558a2c009e9b in virtio_notify_vector
+>
+> > > > > > > > (vdev=0x558a2e7751d0,
+>
+> > > > > > > >     vector=<optimized out>) at
+>
+> > > > > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio.c:1118
+>
+> > > > > > > > #2  0x0000558a2bfdcb1e in
+>
+> > > > > > > > virtio_blk_discard_write_zeroes_complete (
+>
+> > > > > > > >     opaque=0x558a2f2fd420, ret=0)
+>
+> > > > > > > >     at /usr/src/debug/qemu-4.0/hw/block/virtio-blk.c:186
+>
+> > > > > > > > #3  0x0000558a2c261c7e in blk_aio_complete
+>
+> > > > > > > > (acb=0x558a2eed7420)
+>
+> > > > > > > >     at /usr/src/debug/qemu-4.0/block/block-backend.c:1305
+>
+> > > > > > > > #4  0x0000558a2c3031db in coroutine_trampoline (i0=<optimized
+>
+> > > > > > > > out>,
+>
+> > > > > > > >     i1=<optimized out>) at
+>
+> > > > > > > > /usr/src/debug/qemu-4.0/util/coroutine-ucontext.c:116
+>
+> > > > > > > > #5  0x00007f45b2f8b080 in ?? () from /lib64/libc.so.6
+>
+> > > > > > > > #6  0x00007fff9ed75780 in ?? ()
+>
+> > > > > > > > #7  0x0000000000000000 in ?? ()
+>
+> > > > > > > >
+>
+> > > > > > > > It seems like qemu was completing a discard/write_zero
+>
+> > > > > > > > request, but
+>
+> > > > > > > > parent BusState was already freed & set to NULL.
+>
+> > > > > > > >
+>
+> > > > > > > > Do we need to drain all pending request before unrealizing
+>
+> > > > > > > > virtio-blk
+>
+> > > > > > > > device? Like the following patch proposed?
+>
+> > > > > > > >
+>
+> > > > > > > >
+https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg02945.html
+>
+> > > > > > > >
+>
+> > > > > > > > If more info is needed, please let me know.
+>
+> > > > > > >
+>
+> > > > > > > may be this will help:
+>
+> > > > > > >
+https://patchwork.kernel.org/patch/11213047/
+>
+> > > > > >
+>
+> > > > > > Yeah, this looks promising! I'll try it out (though it's a
+>
+> > > > > > one-time
+>
+> > > > > > crash for me). Thanks!
+>
+> > > > >
+>
+> > > > > After applying this patch, I don't see the original segfaut and
+>
+> > > > > backtrace, but I see this crash
+>
+> > > > >
+>
+> > > > > [Thread debugging using libthread_db enabled]
+>
+> > > > > Using host libthread_db library "/lib64/libthread_db.so.1".
+>
+> > > > > Core was generated by `/usr/local/libexec/qemu-kvm -name
+>
+> > > > > sandbox-a2f34a11a7e1449496503bbc4050ae040c0d3'.
+>
+> > > > > Program terminated with signal 11, Segmentation fault.
+>
+> > > > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>,
+>
+> > > > > size=<optimized out>) at
+>
+> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > > > 1324        VirtIOPCIProxy *proxy =
+>
+> > > > > VIRTIO_PCI(DEVICE(vdev)->parent_bus->parent);
+>
+> > > > > Missing separate debuginfos, use: debuginfo-install
+>
+> > > > > glib2-2.42.2-5.1.alios7.x86_64 glibc-2.17-260.alios7.x86_64
+>
+> > > > > libgcc-4.8.5-28.alios7.1.x86_64 libseccomp-2.3.1-3.alios7.x86_64
+>
+> > > > > libstdc++-4.8.5-28.alios7.1.x86_64
+>
+> > > > > numactl-libs-2.0.9-5.1.alios7.x86_64
+>
+> > > > > pixman-0.32.6-3.1.alios7.x86_64 zlib-1.2.7-16.2.alios7.x86_64
+>
+> > > > > (gdb) bt
+>
+> > > > > #0  0x0000561216a57609 in virtio_pci_notify_write
+>
+> > > > > (opaque=0x5612184747e0, addr=0, val=<optimized out>,
+>
+> > > > > size=<optimized out>) at
+>
+> > > > > /usr/src/debug/qemu-4.0/hw/virtio/virtio-pci.c:1324
+>
+> > > > > #1  0x0000561216835b22 in memory_region_write_accessor
+>
+> > > > > (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
+>
+> > > > > size=<optimized out>, shift=<optimized out>, mask=<optimized out>,
+>
+> > > > > attrs=...) at /usr/src/debug/qemu-4.0/memory.c:502
+>
+> > > > > #2  0x0000561216833c5d in access_with_adjusted_size
+>
+> > > > > (addr=addr@entry=0, value=value@entry=0x7fcdeab1b8a8,
+>
+> > > > > size=size@entry=2, access_size_min=<optimized out>,
+>
+> > > > > access_size_max=<optimized out>, access_fn=0x561216835ac0
+>
+> > > > > <memory_region_write_accessor>, mr=0x56121846d340, attrs=...)
+>
+> > > > >     at /usr/src/debug/qemu-4.0/memory.c:568
+>
+> > > > > #3  0x0000561216837c66 in memory_region_dispatch_write
+>
+> > > > > (mr=mr@entry=0x56121846d340, addr=0, data=<optimized out>, size=2,
+>
+> > > > > attrs=attrs@entry=...) at /usr/src/debug/qemu-4.0/memory.c:1503
+>
+> > > > > #4  0x00005612167e036f in flatview_write_continue
+>
+> > > > > (fv=fv@entry=0x56121852edd0, addr=addr@entry=841813602304,
+>
+> > > > > attrs=..., buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out
+>
+> > > > > of bounds>, len=len@entry=2, addr1=<optimized out>, l=<optimized
+>
+> > > > > out>, mr=0x56121846d340)
+>
+> > > > >     at /usr/src/debug/qemu-4.0/exec.c:3279
+>
+> > > > > #5  0x00005612167e0506 in flatview_write (fv=0x56121852edd0,
+>
+> > > > > addr=841813602304, attrs=..., buf=0x7fce7dd97028 <Address
+>
+> > > > > 0x7fce7dd97028 out of bounds>, len=2) at
+>
+> > > > > /usr/src/debug/qemu-4.0/exec.c:3318
+>
+> > > > > #6  0x00005612167e4a1b in address_space_write (as=<optimized out>,
+>
+> > > > > addr=<optimized out>, attrs=..., buf=<optimized out>,
+>
+> > > > > len=<optimized out>) at /usr/src/debug/qemu-4.0/exec.c:3408
+>
+> > > > > #7  0x00005612167e4aa5 in address_space_rw (as=<optimized out>,
+>
+> > > > > addr=<optimized out>, attrs=..., attrs@entry=...,
+>
+> > > > > buf=buf@entry=0x7fce7dd97028 <Address 0x7fce7dd97028 out of
+>
+> > > > > bounds>, len=<optimized out>, is_write=<optimized out>) at
+>
+> > > > > /usr/src/debug/qemu-4.0/exec.c:3419
+>
+> > > > > #8  0x0000561216849da1 in kvm_cpu_exec
+>
+> > > > > (cpu=cpu@entry=0x56121849aa00) at
+>
+> > > > > /usr/src/debug/qemu-4.0/accel/kvm/kvm-all.c:2034
+>
+> > > > > #9  0x000056121682255e in qemu_kvm_cpu_thread_fn
+>
+> > > > > (arg=arg@entry=0x56121849aa00) at
+>
+> > > > > /usr/src/debug/qemu-4.0/cpus.c:1281
+>
+> > > > > #10 0x0000561216b794d6 in qemu_thread_start (args=<optimized out>)
+>
+> > > > > at /usr/src/debug/qemu-4.0/util/qemu-thread-posix.c:502
+>
+> > > > > #11 0x00007fce7bef6e25 in start_thread () from
+>
+> > > > > /lib64/libpthread.so.0
+>
+> > > > > #12 0x00007fce7bc1ef1d in clone () from /lib64/libc.so.6
+>
+> > > > >
+>
+> > > > > And I searched and found
+>
+> > > > >
+https://bugzilla.redhat.com/show_bug.cgi?id=1706759
+, which has the
+>
+> > > > > same
+>
+> > > > > backtrace as above, and it seems commit 7bfde688fb1b ("virtio-blk:
+>
+> > > > > Add
+>
+> > > > > blk_drain() to virtio_blk_device_unrealize()") is to fix this
+>
+> > > > > particular
+>
+> > > > > bug.
+>
+> > > > >
+>
+> > > > > But I can still hit the bug even after applying the commit. Do I
+>
+> > > > > miss
+>
+> > > > > anything?
+>
+> > > >
+>
+> > > > Hi Eryu,
+>
+> > > > This backtrace seems to be caused by this bug (there were two bugs in
+>
+> > > > 1706759):
+https://bugzilla.redhat.com/show_bug.cgi?id=1708480
+>
+> > > > Although the solution hasn't been tested on virtio-blk yet, you may
+>
+> > > > want to apply this patch:
+>
+> > > >
+>
+> > > >
+https://lists.nongnu.org/archive/html/qemu-devel/2019-12/msg05197.html
+>
+> > > > Let me know if this works.
+>
+> > >
+>
+> > > Unfortunately, I still see the same segfault & backtrace after applying
+>
+> > > commit 421afd2fe8dd ("virtio: reset region cache when on queue
+>
+> > > deletion")
+>
+> > >
+>
+> > > Anything I can help to debug?
+>
+> >
+>
+> > Please post the QEMU command-line and the QMP commands use to remove the
+>
+> > device.
+>
+>
+>
+> It's a normal kata instance using virtio-fs as rootfs.
+>
+>
+>
+> /usr/local/libexec/qemu-kvm -name
+>
+> sandbox-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d \
+>
+>  -uuid e03f6b6b-b80b-40c0-8d5b-0cbfed1305d2 -machine
+>
+> q35,accel=kvm,kernel_irqchip,nvdimm,nosmm,nosmbus,nosata,nopit \
+>
+>  -cpu host -qmp
+>
+> unix:/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+>
+>  \
+>
+>  -qmp
+>
+> unix:/run/vc/vm/debug-a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/qmp.sock,server,nowait
+>
+>  \
+>
+>  -m 2048M,slots=10,maxmem=773893M -device
+>
+> pci-bridge,bus=pcie.0,id=pci-bridge-0,chassis_nr=1,shpc=on,addr=2,romfile= \
+>
+>  -device virtio-serial-pci,disable-modern=false,id=serial0,romfile= -device
+>
+> virtconsole,chardev=charconsole0,id=console0 \
+>
+>  -chardev
+>
+> socket,id=charconsole0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/console.sock,server,nowait
+>
+>  \
+>
+>  -device
+>
+> virtserialport,chardev=metricagent,id=channel10,name=metric.agent.channel.10
+>
+>  \
+>
+>  -chardev
+>
+> socket,id=metricagent,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/metric.agent.channel.sock,server,nowait
+>
+>  \
+>
+>  -device nvdimm,id=nv0,memdev=mem0 -object
+>
+> memory-backend-file,id=mem0,mem-path=/usr/local/share/containers-image-1.9.0.img,size=268435456
+>
+>  \
+>
+>  -object rng-random,id=rng0,filename=/dev/urandom -device
+>
+> virtio-rng,rng=rng0,romfile= \
+>
+>  -device virtserialport,chardev=charch0,id=channel0,name=agent.channel.0 \
+>
+>  -chardev
+>
+> socket,id=charch0,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/kata.sock,server,nowait
+>
+>  \
+>
+>  -chardev
+>
+> socket,id=char-6fca044b801a78a1,path=/run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/vhost-fs.sock
+>
+>  \
+>
+>  -device
+>
+> vhost-user-fs-pci,chardev=char-6fca044b801a78a1,tag=kataShared,cache-size=8192M
+>
+>  -netdev tap,id=network-0,vhost=on,vhostfds=3,fds=4 \
+>
+>  -device
+>
+> driver=virtio-net-pci,netdev=network-0,mac=76:57:f1:ab:51:5c,disable-modern=false,mq=on,vectors=4,romfile=
+>
+>  \
+>
+>  -global kvm-pit.lost_tick_policy=discard -vga none -no-user-config
+>
+> -nodefaults -nographic -daemonize \
+>
+>  -object memory-backend-file,id=dimm1,size=2048M,mem-path=/dev/shm,share=on
+>
+> -numa node,memdev=dimm1 -kernel /usr/local/share/kernel \
+>
+>  -append tsc=reliable no_timer_check rcupdate.rcu_expedited=1
+>
+> i8042.direct=1 i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1 noreplace-smp
+>
+> reboot=k console=hvc0 console=hvc1 iommu=off cryptomgr.notests
+>
+> net.ifnames=0 pci=lastbus=0 root=/dev/pmem0p1
+>
+> rootflags=dax,data=ordered,errors=remount-ro ro rootfstype=ext4 quiet
+>
+> systemd.show_status=false panic=1 nr_cpus=96 agent.use_vsock=false
+>
+> init=/usr/lib/systemd/systemd systemd.unit=kata-containers.target
+>
+> systemd.mask=systemd-networkd.service systemd.mask=systemd-networkd.socket \
+>
+>  -pidfile
+>
+> /run/vc/vm/a670786fcb1758d2348eb120939d90ffacf9f049f10b337284ad49bbcd60936d/pid
+>
+>  \
+>
+>  -smp 1,cores=1,threads=1,sockets=96,maxcpus=96
+>
+>
+>
+> QMP command to delete device (the device id is just an example, not the
+>
+> one caused the crash):
+>
+>
+>
+> "{\"arguments\":{\"id\":\"virtio-drive-5967abfb917c8da6\"},\"execute\":\"device_del\"}"
+>
+>
+>
+> which has been hot plugged by:
+>
+> "{\"arguments\":{\"cache\":{\"direct\":true,\"no-flush\":false},\"driver\":\"raw\",\"file\":{\"driver\":\"file\",\"filename\":\"/dev/dm-18\"},\"node-name\":\"drive-5967abfb917c8da6\"},\"execute\":\"blockdev-add\"}"
+>
+> "{\"return\": {}}"
+>
+> "{\"arguments\":{\"addr\":\"01\",\"bus\":\"pci-bridge-0\",\"drive\":\"drive-5967abfb917c8da6\",\"driver\":\"virtio-blk-pci\",\"id\":\"virtio-drive-5967abfb917c8da6\",\"romfile\":\"\",\"share-rw\":\"on\"},\"execute\":\"device_add\"}"
+>
+> "{\"return\": {}}"
+>
+>
+Thanks.  I wasn't able to reproduce this crash with qemu.git/master.
+>
+>
+One thing that is strange about the latest backtrace you posted: QEMU is
+>
+dispatching the memory access instead of using the ioeventfd code that
+>
+that virtio-blk-pci normally takes when a virtqueue is notified.  I
+>
+guess this means ioeventfd has already been disabled due to the hot
+>
+unplug.
+>
+>
+Could you try with machine type "i440fx" instead of "q35"?  I wonder if
+>
+pci-bridge/shpc is part of the problem.
+Sure, will try it. But it may take some time, as the test bed is busy
+with other testing tasks. I'll report back once I got the results.
+
+Thanks,
+Eryu
+
diff --git a/results/classifier/zero-shot/010/review/88281850 b/results/classifier/zero-shot/010/review/88281850
new file mode 100644
index 00000000..b9843885
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/88281850
@@ -0,0 +1,305 @@
+permissions: 0.985
+other: 0.983
+debug: 0.979
+graphic: 0.974
+network: 0.973
+device: 0.970
+performance: 0.969
+semantic: 0.968
+boot: 0.967
+socket: 0.966
+files: 0.962
+PID: 0.959
+vnc: 0.945
+KVM: 0.881
+debug: 0.964
+performance: 0.526
+boot: 0.290
+KVM: 0.045
+other: 0.039
+PID: 0.028
+socket: 0.021
+files: 0.013
+device: 0.013
+vnc: 0.010
+semantic: 0.007
+network: 0.005
+graphic: 0.002
+permissions: 0.001
+
+[Bug] Take more 150s to boot qemu on ARM64
+
+Hi all,
+I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes
+about 150s between beginning to run qemu command and beginng to boot
+Linux kernel ("EFI stub: Booting Linux Kernel...").
+But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel
+code and it finds c2445d387850 ("srcu: Add contention check to
+call_srcu() srcu_data ->lock acquisition").
+The qemu (qemu version is 6.2.92) command i run is :
+
+./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
+--trace "kvm*" \
+-cpu host \
+-machine virt,accel=kvm,gic-version=3  \
+-machine smp.cpus=2,smp.sockets=2 \
+-no-reboot \
+-nographic \
+-monitor unix:/home/cx/qmp-test,server,nowait \
+-bios /home/cx/boot/QEMU_EFI.fd \
+-kernel /home/cx/boot/Image  \
+-device
+pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
+\
+-device vfio-pci,host=7d:01.3,id=net0 \
+-device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
+-drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
+-append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
+-net none \
+-D /home/cx/qemu_log.txt
+I am not familiar with rcu code, and don't know how it causes the issue.
+Do you have any idea about this issue?
+Best Regard,
+
+Xiang Chen
+
+On Mon, Jun 13, 2022 at 08:26:34PM +0800, chenxiang (M) wrote:
+>
+Hi all,
+>
+>
+I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes about
+>
+150s between beginning to run qemu command and beginng to boot Linux kernel
+>
+("EFI stub: Booting Linux Kernel...").
+>
+>
+But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel code
+>
+and it finds c2445d387850 ("srcu: Add contention check to call_srcu()
+>
+srcu_data ->lock acquisition").
+>
+>
+The qemu (qemu version is 6.2.92) command i run is :
+>
+>
+./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
+>
+--trace "kvm*" \
+>
+-cpu host \
+>
+-machine virt,accel=kvm,gic-version=3  \
+>
+-machine smp.cpus=2,smp.sockets=2 \
+>
+-no-reboot \
+>
+-nographic \
+>
+-monitor unix:/home/cx/qmp-test,server,nowait \
+>
+-bios /home/cx/boot/QEMU_EFI.fd \
+>
+-kernel /home/cx/boot/Image  \
+>
+-device
+>
+pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
+>
+\
+>
+-device vfio-pci,host=7d:01.3,id=net0 \
+>
+-device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
+>
+-drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
+>
+-append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
+>
+-net none \
+>
+-D /home/cx/qemu_log.txt
+>
+>
+I am not familiar with rcu code, and don't know how it causes the issue. Do
+>
+you have any idea about this issue?
+Please see the discussion here:
+https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
+Though that report requires ACPI to be forced on to get the
+delay, which results in more than 9,000 back-to-back calls to
+synchronize_srcu_expedited().  I cannot reproduce this on my setup, even
+with an artificial tight loop invoking synchronize_srcu_expedited(),
+but then again I don't have ARM hardware.
+
+My current guess is that the following patch, but with larger values for
+SRCU_MAX_NODELAY_PHASE.  Here "larger" might well be up in the hundreds,
+or perhaps even larger.
+
+If you get a chance to experiment with this, could you please reply
+to the discussion at the above URL?  (Or let me know, and I can CC
+you on the next message in that thread.)
+
+                                                Thanx, Paul
+
+------------------------------------------------------------------------
+
+diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
+index 50ba70f019dea..0db7873f4e95b 100644
+--- a/kernel/rcu/srcutree.c
++++ b/kernel/rcu/srcutree.c
+@@ -513,7 +513,7 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
+ 
+ #define SRCU_INTERVAL          1       // Base delay if no expedited GPs 
+pending.
+ #define SRCU_MAX_INTERVAL      10      // Maximum incremental delay from slow 
+readers.
+-#define SRCU_MAX_NODELAY_PHASE 1       // Maximum per-GP-phase consecutive 
+no-delay instances.
++#define SRCU_MAX_NODELAY_PHASE 3       // Maximum per-GP-phase consecutive 
+no-delay instances.
+ #define SRCU_MAX_NODELAY       100     // Maximum consecutive no-delay 
+instances.
+ 
+ /*
+@@ -522,16 +522,22 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
+  */
+ static unsigned long srcu_get_delay(struct srcu_struct *ssp)
+ {
++       unsigned long gpstart;
++       unsigned long j;
+        unsigned long jbase = SRCU_INTERVAL;
+ 
+        if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), 
+READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
+                jbase = 0;
+-       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)))
+-               jbase += jiffies - READ_ONCE(ssp->srcu_gp_start);
+-       if (!jbase) {
+-               WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
+READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
+-               if (READ_ONCE(ssp->srcu_n_exp_nodelay) > SRCU_MAX_NODELAY_PHASE)
+-                       jbase = 1;
++       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq))) {
++               j = jiffies - 1;
++               gpstart = READ_ONCE(ssp->srcu_gp_start);
++               if (time_after(j, gpstart))
++                       jbase += j - gpstart;
++               if (!jbase) {
++                       WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
+READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
++                       if (READ_ONCE(ssp->srcu_n_exp_nodelay) > 
+SRCU_MAX_NODELAY_PHASE)
++                               jbase = 1;
++               }
+        }
+        return jbase > SRCU_MAX_INTERVAL ? SRCU_MAX_INTERVAL : jbase;
+ }
+
+在 2022/6/13 21:22, Paul E. McKenney 写道:
+On Mon, Jun 13, 2022 at 08:26:34PM +0800, chenxiang (M) wrote:
+Hi all,
+
+I encounter a issue with kernel 5.19-rc1 on a ARM64 board:  it takes about
+150s between beginning to run qemu command and beginng to boot Linux kernel
+("EFI stub: Booting Linux Kernel...").
+
+But in kernel 5.18-rc4, it only takes about 5s. I git bisect the kernel code
+and it finds c2445d387850 ("srcu: Add contention check to call_srcu()
+srcu_data ->lock acquisition").
+
+The qemu (qemu version is 6.2.92) command i run is :
+
+./qemu-system-aarch64 -m 4G,slots=4,maxmem=8g \
+--trace "kvm*" \
+-cpu host \
+-machine virt,accel=kvm,gic-version=3  \
+-machine smp.cpus=2,smp.sockets=2 \
+-no-reboot \
+-nographic \
+-monitor unix:/home/cx/qmp-test,server,nowait \
+-bios /home/cx/boot/QEMU_EFI.fd \
+-kernel /home/cx/boot/Image  \
+-device 
+pcie-root-port,port=0x8,chassis=1,id=net1,bus=pcie.0,multifunction=on,addr=0x1
+\
+-device vfio-pci,host=7d:01.3,id=net0 \
+-device virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=4  \
+-drive file=/home/cx/boot/boot_ubuntu.img,if=none,id=drive0 \
+-append "rdinit=init console=ttyAMA0 root=/dev/vda rootfstype=ext4 rw " \
+-net none \
+-D /home/cx/qemu_log.txt
+
+I am not familiar with rcu code, and don't know how it causes the issue. Do
+you have any idea about this issue?
+Please see the discussion here:
+https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
+Though that report requires ACPI to be forced on to get the
+delay, which results in more than 9,000 back-to-back calls to
+synchronize_srcu_expedited().  I cannot reproduce this on my setup, even
+with an artificial tight loop invoking synchronize_srcu_expedited(),
+but then again I don't have ARM hardware.
+
+My current guess is that the following patch, but with larger values for
+SRCU_MAX_NODELAY_PHASE.  Here "larger" might well be up in the hundreds,
+or perhaps even larger.
+
+If you get a chance to experiment with this, could you please reply
+to the discussion at the above URL?  (Or let me know, and I can CC
+you on the next message in that thread.)
+Ok, thanks, i will reply it on above URL.
+Thanx, Paul
+
+------------------------------------------------------------------------
+
+diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
+index 50ba70f019dea..0db7873f4e95b 100644
+--- a/kernel/rcu/srcutree.c
++++ b/kernel/rcu/srcutree.c
+@@ -513,7 +513,7 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
+#define SRCU_INTERVAL		1	// Base delay if no expedited GPs pending.
+#define SRCU_MAX_INTERVAL     10      // Maximum incremental delay from slow 
+readers.
+-#define SRCU_MAX_NODELAY_PHASE 1       // Maximum per-GP-phase consecutive 
+no-delay instances.
++#define SRCU_MAX_NODELAY_PHASE 3       // Maximum per-GP-phase consecutive 
+no-delay instances.
+  #define SRCU_MAX_NODELAY      100     // Maximum consecutive no-delay 
+instances.
+/*
+@@ -522,16 +522,22 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
+   */
+  static unsigned long srcu_get_delay(struct srcu_struct *ssp)
+  {
++       unsigned long gpstart;
++       unsigned long j;
+        unsigned long jbase = SRCU_INTERVAL;
+if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
+jbase = 0;
+-       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)))
+-               jbase += jiffies - READ_ONCE(ssp->srcu_gp_start);
+-       if (!jbase) {
+-               WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
+READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
+-               if (READ_ONCE(ssp->srcu_n_exp_nodelay) > SRCU_MAX_NODELAY_PHASE)
+-                       jbase = 1;
++       if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq))) {
++               j = jiffies - 1;
++               gpstart = READ_ONCE(ssp->srcu_gp_start);
++               if (time_after(j, gpstart))
++                       jbase += j - gpstart;
++               if (!jbase) {
++                       WRITE_ONCE(ssp->srcu_n_exp_nodelay, 
+READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
++                       if (READ_ONCE(ssp->srcu_n_exp_nodelay) > 
+SRCU_MAX_NODELAY_PHASE)
++                               jbase = 1;
++               }
+        }
+        return jbase > SRCU_MAX_INTERVAL ? SRCU_MAX_INTERVAL : jbase;
+  }
+.
+
diff --git a/results/classifier/zero-shot/010/review/92957605 b/results/classifier/zero-shot/010/review/92957605
new file mode 100644
index 00000000..087852b8
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/92957605
@@ -0,0 +1,442 @@
+other: 0.997
+permissions: 0.996
+semantic: 0.995
+debug: 0.994
+performance: 0.994
+PID: 0.993
+device: 0.993
+socket: 0.993
+boot: 0.992
+network: 0.989
+graphic: 0.986
+files: 0.986
+KVM: 0.982
+vnc: 0.981
+debug: 0.518
+files: 0.084
+PID: 0.043
+device: 0.024
+network: 0.021
+other: 0.013
+socket: 0.013
+boot: 0.013
+semantic: 0.012
+vnc: 0.007
+performance: 0.004
+graphic: 0.003
+KVM: 0.002
+permissions: 0.001
+
+[Qemu-devel] Fwd:  [BUG] Failed to compile using gcc7.1
+
+Hi all,
+I encountered the same problem on gcc 7.1.1 and found Qu's mail in
+this list from google search.
+
+Temporarily fix it by specifying the string length in snprintf
+directive. Hope this is helpful to other people encountered the same
+problem.
+
+@@ -1,9 +1,7 @@
+---
+--- a/block/blkdebug.c
+-                 "blkdebug:%s:%s", s->config_file ?: "",
+--- a/block/blkverify.c
+-                 "blkverify:%s:%s",
+--- a/hw/usb/bus.c
+-        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
+-        snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
+--
++++ b/block/blkdebug.c
++                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
++++ b/block/blkverify.c
++                 "blkverify:%.2038s:%.2038s",
++++ b/hw/usb/bus.c
++        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
++        snprintf(downstream->path, sizeof(downstream->path), "%.12d", portnr);
+
+Tsung-en Hsiao
+
+>
+Qu Wenruo Wrote:
+>
+>
+Hi all,
+>
+>
+After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
+>
+>
+The error is:
+>
+>
+------
+>
+CC      block/blkdebug.o
+>
+block/blkdebug.c: In function 'blkdebug_refresh_filename':
+>
+>
+block/blkdebug.c:693:31: error: '%s' directive output may be truncated
+>
+writing up to 4095 bytes into a region of size 4086
+>
+[-Werror=format-truncation=]
+>
+>
+"blkdebug:%s:%s", s->config_file ?: "",
+>
+^~
+>
+In file included from /usr/include/stdio.h:939:0,
+>
+from /home/adam/qemu/include/qemu/osdep.h:68,
+>
+from block/blkdebug.c:25:
+>
+>
+/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output 11
+>
+or more bytes (assuming 4106) into a destination of size 4096
+>
+>
+return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
+>
+^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+>
+__bos (__s), __fmt, __va_arg_pack ());
+>
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+>
+cc1: all warnings being treated as errors
+>
+make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
+>
+------
+>
+>
+It seems that gcc 7 is introducing more restrict check for printf.
+>
+>
+If using clang, although there are some extra warning, it can at least pass
+>
+the compile.
+>
+>
+Thanks,
+>
+Qu
+
+Hi Tsung-en,
+
+On 06/11/2017 04:08 PM, Tsung-en Hsiao wrote:
+Hi all,
+I encountered the same problem on gcc 7.1.1 and found Qu's mail in
+this list from google search.
+
+Temporarily fix it by specifying the string length in snprintf
+directive. Hope this is helpful to other people encountered the same
+problem.
+Thank your for sharing this.
+@@ -1,9 +1,7 @@
+---
+--- a/block/blkdebug.c
+-                 "blkdebug:%s:%s", s->config_file ?: "",
+--- a/block/blkverify.c
+-                 "blkverify:%s:%s",
+--- a/hw/usb/bus.c
+-        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
+-        snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
+--
++++ b/block/blkdebug.c
++                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
+It is a rather funny way to silent this warning :) Truncating the
+filename until it fits.
+However I don't think it is the correct way since there is indeed an
+overflow of bs->exact_filename.
+Apparently exact_filename from "block/block_int.h" is defined to hold a
+pathname:
+char exact_filename[PATH_MAX];
+but is used for more than that (for example in blkdebug.c it might use
+until 10+2*PATH_MAX chars).
+I suppose it started as a buffer to hold a pathname then more block
+drivers were added and this buffer ended used differently.
+If it is a multi-purpose buffer one safer option might be to declare it
+as a GString* and use g_string_printf().
+I CC'ed the block folks to have their feedback.
+
+Regards,
+
+Phil.
++++ b/block/blkverify.c
++                 "blkverify:%.2038s:%.2038s",
++++ b/hw/usb/bus.c
++        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
++        snprintf(downstream->path, sizeof(downstream->path), "%.12d", portnr);
+
+Tsung-en Hsiao
+Qu Wenruo Wrote:
+
+Hi all,
+
+After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with gcc.
+
+The error is:
+
+------
+ CC      block/blkdebug.o
+block/blkdebug.c: In function 'blkdebug_refresh_filename':
+
+block/blkdebug.c:693:31: error: '%s' directive output may be truncated writing 
+up to 4095 bytes into a region of size 4086 [-Werror=format-truncation=]
+
+                 "blkdebug:%s:%s", s->config_file ?: "",
+                              ^~
+In file included from /usr/include/stdio.h:939:0,
+                from /home/adam/qemu/include/qemu/osdep.h:68,
+                from block/blkdebug.c:25:
+
+/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output 11 or 
+more bytes (assuming 4106) into a destination of size 4096
+
+  return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
+         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+       __bos (__s), __fmt, __va_arg_pack ());
+       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cc1: all warnings being treated as errors
+make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
+------
+
+It seems that gcc 7 is introducing more restrict check for printf.
+
+If using clang, although there are some extra warning, it can at least pass the 
+compile.
+
+Thanks,
+Qu
+
+On 2017-06-12 05:19, Philippe Mathieu-Daudé wrote:
+>
+Hi Tsung-en,
+>
+>
+On 06/11/2017 04:08 PM, Tsung-en Hsiao wrote:
+>
+> Hi all,
+>
+> I encountered the same problem on gcc 7.1.1 and found Qu's mail in
+>
+> this list from google search.
+>
+>
+>
+> Temporarily fix it by specifying the string length in snprintf
+>
+> directive. Hope this is helpful to other people encountered the same
+>
+> problem.
+>
+>
+Thank your for sharing this.
+>
+>
+>
+>
+> @@ -1,9 +1,7 @@
+>
+> ---
+>
+> --- a/block/blkdebug.c
+>
+> -                 "blkdebug:%s:%s", s->config_file ?: "",
+>
+> --- a/block/blkverify.c
+>
+> -                 "blkverify:%s:%s",
+>
+> --- a/hw/usb/bus.c
+>
+> -        snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
+>
+> -        snprintf(downstream->path, sizeof(downstream->path), "%d",
+>
+> portnr);
+>
+> --
+>
+> +++ b/block/blkdebug.c
+>
+> +                 "blkdebug:%.2037s:%.2037s", s->config_file ?: "",
+>
+>
+It is a rather funny way to silent this warning :) Truncating the
+>
+filename until it fits.
+>
+>
+However I don't think it is the correct way since there is indeed an
+>
+overflow of bs->exact_filename.
+>
+>
+Apparently exact_filename from "block/block_int.h" is defined to hold a
+>
+pathname:
+>
+char exact_filename[PATH_MAX];
+>
+>
+but is used for more than that (for example in blkdebug.c it might use
+>
+until 10+2*PATH_MAX chars).
+In any case, truncating the filenames will do just as much as truncating
+the result: You'll get an unusable filename.
+
+>
+I suppose it started as a buffer to hold a pathname then more block
+>
+drivers were added and this buffer ended used differently.
+>
+>
+If it is a multi-purpose buffer one safer option might be to declare it
+>
+as a GString* and use g_string_printf().
+What it is supposed to be now is just an information string we can print
+to the user, because strings are nicer than JSON objects. There are some
+commands that take a filename for identifying a block node, but I dream
+we can get rid of them in 3.0...
+
+The right solution is to remove it altogether and have a
+"char *bdrv_filename(BlockDriverState *bs)" function (which generates
+the filename every time it's called). I've been working on this for some
+years now, actually, but it was never pressing enough to get it finished
+(so I never had enough time).
+
+What we can do in the meantime is to not generate a plain filename if it
+won't fit into bs->exact_filename.
+
+(The easiest way to do this probably would be to truncate
+bs->exact_filename back to an empty string if snprintf() returns a value
+greater than or equal to the length of bs->exact_filename.)
+
+What to do about hw/usb/bus.c I don't know (I guess the best solution
+would be to ignore the warning, but I don't suppose that is going to work).
+
+Max
+
+>
+>
+I CC'ed the block folks to have their feedback.
+>
+>
+Regards,
+>
+>
+Phil.
+>
+>
+> +++ b/block/blkverify.c
+>
+> +                 "blkverify:%.2038s:%.2038s",
+>
+> +++ b/hw/usb/bus.c
+>
+> +        snprintf(downstream->path, sizeof(downstream->path), "%.12s.%d",
+>
+> +        snprintf(downstream->path, sizeof(downstream->path), "%.12d",
+>
+> portnr);
+>
+>
+>
+> Tsung-en Hsiao
+>
+>
+>
+>> Qu Wenruo Wrote:
+>
+>>
+>
+>> Hi all,
+>
+>>
+>
+>> After upgrading gcc from 6.3.1 to 7.1.1, qemu can't be compiled with
+>
+>> gcc.
+>
+>>
+>
+>> The error is:
+>
+>>
+>
+>> ------
+>
+>>  CC      block/blkdebug.o
+>
+>> block/blkdebug.c: In function 'blkdebug_refresh_filename':
+>
+>>
+>
+>> block/blkdebug.c:693:31: error: '%s' directive output may be
+>
+>> truncated writing up to 4095 bytes into a region of size 4086
+>
+>> [-Werror=format-truncation=]
+>
+>>
+>
+>>                  "blkdebug:%s:%s", s->config_file ?: "",
+>
+>>                               ^~
+>
+>> In file included from /usr/include/stdio.h:939:0,
+>
+>>                 from /home/adam/qemu/include/qemu/osdep.h:68,
+>
+>>                 from block/blkdebug.c:25:
+>
+>>
+>
+>> /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk'
+>
+>> output 11 or more bytes (assuming 4106) into a destination of size 4096
+>
+>>
+>
+>>   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
+>
+>>          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+>
+>>        __bos (__s), __fmt, __va_arg_pack ());
+>
+>>        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+>
+>> cc1: all warnings being treated as errors
+>
+>> make: *** [/home/adam/qemu/rules.mak:69: block/blkdebug.o] Error 1
+>
+>> ------
+>
+>>
+>
+>> It seems that gcc 7 is introducing more restrict check for printf.
+>
+>>
+>
+>> If using clang, although there are some extra warning, it can at
+>
+>> least pass the compile.
+>
+>>
+>
+>> Thanks,
+>
+>> Qu
+>
+>
+signature.asc
+Description:
+OpenPGP digital signature
+
diff --git a/results/classifier/zero-shot/010/review/95154278 b/results/classifier/zero-shot/010/review/95154278
new file mode 100644
index 00000000..b68360eb
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/95154278
@@ -0,0 +1,179 @@
+permissions: 0.989
+other: 0.953
+debug: 0.951
+device: 0.951
+graphic: 0.950
+PID: 0.949
+vnc: 0.948
+semantic: 0.937
+performance: 0.936
+files: 0.918
+KVM: 0.916
+socket: 0.913
+network: 0.913
+boot: 0.902
+boot: 0.799
+files: 0.766
+device: 0.619
+PID: 0.516
+vnc: 0.477
+debug: 0.235
+other: 0.163
+semantic: 0.039
+socket: 0.019
+KVM: 0.014
+performance: 0.012
+permissions: 0.011
+network: 0.008
+graphic: 0.004
+
+[Qemu-devel] [BUG] checkpatch.pl hangs on target/mips/msa_helper.c
+
+If  checkpatch.pl is applied (using switch "-f") on file 
+target/mips/msa_helper.c, it will hang.
+
+There is a workaround for this particular file:
+
+These lines in msa_helper.c:
+
+        uint## BITS ##_t S = _S, T = _T;                            \
+        uint## BITS ##_t as, at, xs, xt, xd;                        \
+
+should be replaced with:
+
+        uint## BITS ## _t S = _S, T = _T;                           \
+        uint## BITS ## _t as, at, xs, xt, xd;                       \
+
+(a space is added after the second "##" in each line)
+
+The workaround is found by partial deleting and undeleting of the code in 
+msa_helper.c in binary search fashion.
+
+This workaround will soon be submitted by me as a patch within a series on misc 
+MIPS issues.
+
+I took a look at checkpatch.pl code, and it looks it is fairly complicated to 
+fix the issue, since it happens in the code segment involving intricate logic 
+conditions.
+
+Regards,
+Aleksandar
+
+On Wed, Jul 04, 2018 at 03:35:18PM +0000, Aleksandar Markovic wrote:
+>
+If  checkpatch.pl is applied (using switch "-f") on file
+>
+target/mips/msa_helper.c, it will hang.
+>
+>
+There is a workaround for this particular file:
+>
+>
+These lines in msa_helper.c:
+>
+>
+uint## BITS ##_t S = _S, T = _T;                            \
+>
+uint## BITS ##_t as, at, xs, xt, xd;                        \
+>
+>
+should be replaced with:
+>
+>
+uint## BITS ## _t S = _S, T = _T;                           \
+>
+uint## BITS ## _t as, at, xs, xt, xd;                       \
+>
+>
+(a space is added after the second "##" in each line)
+>
+>
+The workaround is found by partial deleting and undeleting of the code in
+>
+msa_helper.c in binary search fashion.
+>
+>
+This workaround will soon be submitted by me as a patch within a series on
+>
+misc MIPS issues.
+>
+>
+I took a look at checkpatch.pl code, and it looks it is fairly complicated to
+>
+fix the issue, since it happens in the code segment involving intricate logic
+>
+conditions.
+Thanks for figuring this out, Aleksandar.  Not sure if anyone else has
+the apetite to fix checkpatch.pl.
+
+Stefan
+signature.asc
+Description:
+PGP signature
+
+On 07/11/2018 09:36 AM, Stefan Hajnoczi wrote:
+>
+On Wed, Jul 04, 2018 at 03:35:18PM +0000, Aleksandar Markovic wrote:
+>
+> If  checkpatch.pl is applied (using switch "-f") on file
+>
+> target/mips/msa_helper.c, it will hang.
+>
+>
+>
+> There is a workaround for this particular file:
+>
+>
+>
+> These lines in msa_helper.c:
+>
+>
+>
+>         uint## BITS ##_t S = _S, T = _T;                            \
+>
+>         uint## BITS ##_t as, at, xs, xt, xd;                        \
+>
+>
+>
+> should be replaced with:
+>
+>
+>
+>         uint## BITS ## _t S = _S, T = _T;                           \
+>
+>         uint## BITS ## _t as, at, xs, xt, xd;                       \
+>
+>
+>
+> (a space is added after the second "##" in each line)
+>
+>
+>
+> The workaround is found by partial deleting and undeleting of the code in
+>
+> msa_helper.c in binary search fashion.
+>
+>
+>
+> This workaround will soon be submitted by me as a patch within a series on
+>
+> misc MIPS issues.
+>
+>
+>
+> I took a look at checkpatch.pl code, and it looks it is fairly complicated
+>
+> to fix the issue, since it happens in the code segment involving intricate
+>
+> logic conditions.
+>
+>
+Thanks for figuring this out, Aleksandar.  Not sure if anyone else has
+>
+the apetite to fix checkpatch.pl.
+Anyone else but Paolo ;P
+http://lists.nongnu.org/archive/html/qemu-devel/2018-07/msg01250.html
+signature.asc
+Description:
+OpenPGP digital signature
+
diff --git a/results/classifier/zero-shot/010/review/96782458 b/results/classifier/zero-shot/010/review/96782458
new file mode 100644
index 00000000..bee60bd8
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/96782458
@@ -0,0 +1,1023 @@
+debug: 0.989
+permissions: 0.986
+performance: 0.985
+semantic: 0.984
+other: 0.982
+boot: 0.980
+PID: 0.980
+files: 0.978
+socket: 0.976
+vnc: 0.976
+device: 0.974
+graphic: 0.973
+network: 0.967
+KVM: 0.963
+debug: 0.925
+KVM: 0.771
+performance: 0.063
+vnc: 0.048
+files: 0.039
+PID: 0.017
+device: 0.013
+semantic: 0.013
+other: 0.010
+socket: 0.007
+network: 0.005
+graphic: 0.002
+boot: 0.002
+permissions: 0.001
+
+[Qemu-devel] [BUG] Migrate failes between boards with different PMC counts
+
+Hi all,
+
+Recently, I found migration failed when enable vPMU.
+
+migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+
+As long as enable vPMU, qemu will save / load the
+vmstate_msr_architectural_pmu(msr_global_ctrl) register during the migration.
+But global_ctrl generated based on cpuid(0xA), the number of general-purpose 
+performance
+monitoring counters(PMC) can vary according to Intel SDN. The number of PMC 
+presented
+to vm, does not support configuration currently, it depend on host cpuid, and 
+enable all pmc
+defaultly at KVM. It cause migration to fail between boards with different PMC 
+counts.
+
+The return value of cpuid (0xA) is different dur to cpu, according to Intel 
+SDN，18-10 Vol. 3B:
+
+Note: The number of general-purpose performance monitoring counters (i.e. N in 
+Figure 18-9)
+can vary across processor generations within a processor family, across 
+processor families, or
+could be different depending on the configuration chosen at boot time in the 
+BIOS regarding
+Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom processors; N 
+=4 for processors
+based on the Nehalem microarchitecture; for processors based on the Sandy Bridge
+microarchitecture, N = 4 if Intel Hyper Threading Technology is active and N=8 
+if not active).
+
+Also I found, N=8 if HT is not active based on the broadwell，,
+such as CPU E7-8890 v4 @ 2.20GHz   
+
+# ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
+/data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming 
+tcp::8888
+Completed 100 %
+qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
+qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833: 
+kvm_put_msrs: 
+Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+Aborted
+
+So make number of pmc configurable to vm ? Any better idea ?
+
+
+Regards,
+-Zhuang Yanying
+
+* Zhuangyanying (address@hidden) wrote:
+>
+Hi all,
+>
+>
+Recently, I found migration failed when enable vPMU.
+>
+>
+migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+>
+As long as enable vPMU, qemu will save / load the
+>
+vmstate_msr_architectural_pmu(msr_global_ctrl) register during the migration.
+>
+But global_ctrl generated based on cpuid(0xA), the number of general-purpose
+>
+performance
+>
+monitoring counters(PMC) can vary according to Intel SDN. The number of PMC
+>
+presented
+>
+to vm, does not support configuration currently, it depend on host cpuid, and
+>
+enable all pmc
+>
+defaultly at KVM. It cause migration to fail between boards with different
+>
+PMC counts.
+>
+>
+The return value of cpuid (0xA) is different dur to cpu, according to Intel
+>
+SDN，18-10 Vol. 3B:
+>
+>
+Note: The number of general-purpose performance monitoring counters (i.e. N
+>
+in Figure 18-9)
+>
+can vary across processor generations within a processor family, across
+>
+processor families, or
+>
+could be different depending on the configuration chosen at boot time in the
+>
+BIOS regarding
+>
+Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom processors;
+>
+N =4 for processors
+>
+based on the Nehalem microarchitecture; for processors based on the Sandy
+>
+Bridge
+>
+microarchitecture, N = 4 if Intel Hyper Threading Technology is active and
+>
+N=8 if not active).
+>
+>
+Also I found, N=8 if HT is not active based on the broadwell，,
+>
+such as CPU E7-8890 v4 @ 2.20GHz
+>
+>
+# ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
+>
+/data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
+>
+tcp::8888
+>
+Completed 100 %
+>
+qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
+>
+qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+kvm_put_msrs:
+>
+Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+Aborted
+>
+>
+So make number of pmc configurable to vm ? Any better idea ?
+Coincidentally we hit a similar problem a few days ago with -cpu host  - it 
+took me
+quite a while to spot the difference between the machines was the source
+had hyperthreading disabled.
+
+An option to set the number of counters makes sense to me; but I wonder
+how many other options we need as well.  Also, I'm not sure there's any
+easy way for libvirt etc to figure out how many counters a host supports - it's
+not in /proc/cpuinfo.
+
+Dave
+
+>
+>
+Regards,
+>
+-Zhuang Yanying
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
+>
+* Zhuangyanying (address@hidden) wrote:
+>
+> Hi all,
+>
+>
+>
+> Recently, I found migration failed when enable vPMU.
+>
+>
+>
+> migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+>
+>
+> As long as enable vPMU, qemu will save / load the
+>
+> vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
+>
+> migration.
+>
+> But global_ctrl generated based on cpuid(0xA), the number of
+>
+> general-purpose performance
+>
+> monitoring counters(PMC) can vary according to Intel SDN. The number of PMC
+>
+> presented
+>
+> to vm, does not support configuration currently, it depend on host cpuid,
+>
+> and enable all pmc
+>
+> defaultly at KVM. It cause migration to fail between boards with different
+>
+> PMC counts.
+>
+>
+>
+> The return value of cpuid (0xA) is different dur to cpu, according to Intel
+>
+> SDN，18-10 Vol. 3B:
+>
+>
+>
+> Note: The number of general-purpose performance monitoring counters (i.e. N
+>
+> in Figure 18-9)
+>
+> can vary across processor generations within a processor family, across
+>
+> processor families, or
+>
+> could be different depending on the configuration chosen at boot time in
+>
+> the BIOS regarding
+>
+> Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
+>
+> processors; N =4 for processors
+>
+> based on the Nehalem microarchitecture; for processors based on the Sandy
+>
+> Bridge
+>
+> microarchitecture, N = 4 if Intel Hyper Threading Technology is active and
+>
+> N=8 if not active).
+>
+>
+>
+> Also I found, N=8 if HT is not active based on the broadwell，,
+>
+> such as CPU E7-8890 v4 @ 2.20GHz
+>
+>
+>
+> # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
+>
+> /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
+>
+> tcp::8888
+>
+> Completed 100 %
+>
+> qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
+>
+> qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+> kvm_put_msrs:
+>
+> Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+> Aborted
+>
+>
+>
+> So make number of pmc configurable to vm ? Any better idea ?
+>
+>
+Coincidentally we hit a similar problem a few days ago with -cpu host  - it
+>
+took me
+>
+quite a while to spot the difference between the machines was the source
+>
+had hyperthreading disabled.
+>
+>
+An option to set the number of counters makes sense to me; but I wonder
+>
+how many other options we need as well.  Also, I'm not sure there's any
+>
+easy way for libvirt etc to figure out how many counters a host supports -
+>
+it's not in /proc/cpuinfo.
+We actually try to avoid /proc/cpuinfo whereever possible. We do direct
+CPUID asm instructions to identify features, and prefer to use
+/sys/devices/system/cpu if that has suitable data
+
+Where do the PMC counts come from originally ? CPUID or something else ?
+
+Regards,
+Daniel
+-- 
+|:
+https://berrange.com
+-o-
+https://www.flickr.com/photos/dberrange
+:|
+|:
+https://libvirt.org
+-o-
+https://fstop138.berrange.com
+:|
+|:
+https://entangle-photo.org
+-o-
+https://www.instagram.com/dberrange
+:|
+
+* Daniel P. Berrange (address@hidden) wrote:
+>
+On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
+>
+> * Zhuangyanying (address@hidden) wrote:
+>
+> > Hi all,
+>
+> >
+>
+> > Recently, I found migration failed when enable vPMU.
+>
+> >
+>
+> > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+> >
+>
+> > As long as enable vPMU, qemu will save / load the
+>
+> > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
+>
+> > migration.
+>
+> > But global_ctrl generated based on cpuid(0xA), the number of
+>
+> > general-purpose performance
+>
+> > monitoring counters(PMC) can vary according to Intel SDN. The number of
+>
+> > PMC presented
+>
+> > to vm, does not support configuration currently, it depend on host cpuid,
+>
+> > and enable all pmc
+>
+> > defaultly at KVM. It cause migration to fail between boards with
+>
+> > different PMC counts.
+>
+> >
+>
+> > The return value of cpuid (0xA) is different dur to cpu, according to
+>
+> > Intel SDN，18-10 Vol. 3B:
+>
+> >
+>
+> > Note: The number of general-purpose performance monitoring counters (i.e.
+>
+> > N in Figure 18-9)
+>
+> > can vary across processor generations within a processor family, across
+>
+> > processor families, or
+>
+> > could be different depending on the configuration chosen at boot time in
+>
+> > the BIOS regarding
+>
+> > Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
+>
+> > processors; N =4 for processors
+>
+> > based on the Nehalem microarchitecture; for processors based on the Sandy
+>
+> > Bridge
+>
+> > microarchitecture, N = 4 if Intel Hyper Threading Technology is active
+>
+> > and N=8 if not active).
+>
+> >
+>
+> > Also I found, N=8 if HT is not active based on the broadwell，,
+>
+> > such as CPU E7-8890 v4 @ 2.20GHz
+>
+> >
+>
+> > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
+>
+> > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true -incoming
+>
+> > tcp::8888
+>
+> > Completed 100 %
+>
+> > qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
+>
+> > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+> > kvm_put_msrs:
+>
+> > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+> > Aborted
+>
+> >
+>
+> > So make number of pmc configurable to vm ? Any better idea ?
+>
+>
+>
+> Coincidentally we hit a similar problem a few days ago with -cpu host  - it
+>
+> took me
+>
+> quite a while to spot the difference between the machines was the source
+>
+> had hyperthreading disabled.
+>
+>
+>
+> An option to set the number of counters makes sense to me; but I wonder
+>
+> how many other options we need as well.  Also, I'm not sure there's any
+>
+> easy way for libvirt etc to figure out how many counters a host supports -
+>
+> it's not in /proc/cpuinfo.
+>
+>
+We actually try to avoid /proc/cpuinfo whereever possible. We do direct
+>
+CPUID asm instructions to identify features, and prefer to use
+>
+/sys/devices/system/cpu if that has suitable data
+>
+>
+Where do the PMC counts come from originally ? CPUID or something else ?
+Yes, they're bits 8..15 of CPUID leaf 0xa
+
+Dave
+
+>
+Regards,
+>
+Daniel
+>
+--
+>
+|:
+https://berrange.com
+-o-
+https://www.flickr.com/photos/dberrange
+:|
+>
+|:
+https://libvirt.org
+-o-
+https://fstop138.berrange.com
+:|
+>
+|:
+https://entangle-photo.org
+-o-
+https://www.instagram.com/dberrange
+:|
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
+On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
+>
+* Daniel P. Berrange (address@hidden) wrote:
+>
+> On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
+>
+> > * Zhuangyanying (address@hidden) wrote:
+>
+> > > Hi all,
+>
+> > >
+>
+> > > Recently, I found migration failed when enable vPMU.
+>
+> > >
+>
+> > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+> > >
+>
+> > > As long as enable vPMU, qemu will save / load the
+>
+> > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
+>
+> > > migration.
+>
+> > > But global_ctrl generated based on cpuid(0xA), the number of
+>
+> > > general-purpose performance
+>
+> > > monitoring counters(PMC) can vary according to Intel SDN. The number of
+>
+> > > PMC presented
+>
+> > > to vm, does not support configuration currently, it depend on host
+>
+> > > cpuid, and enable all pmc
+>
+> > > defaultly at KVM. It cause migration to fail between boards with
+>
+> > > different PMC counts.
+>
+> > >
+>
+> > > The return value of cpuid (0xA) is different dur to cpu, according to
+>
+> > > Intel SDN，18-10 Vol. 3B:
+>
+> > >
+>
+> > > Note: The number of general-purpose performance monitoring counters
+>
+> > > (i.e. N in Figure 18-9)
+>
+> > > can vary across processor generations within a processor family, across
+>
+> > > processor families, or
+>
+> > > could be different depending on the configuration chosen at boot time
+>
+> > > in the BIOS regarding
+>
+> > > Intel Hyper Threading Technology, (e.g. N=2 for 45 nm Intel Atom
+>
+> > > processors; N =4 for processors
+>
+> > > based on the Nehalem microarchitecture; for processors based on the
+>
+> > > Sandy Bridge
+>
+> > > microarchitecture, N = 4 if Intel Hyper Threading Technology is active
+>
+> > > and N=8 if not active).
+>
+> > >
+>
+> > > Also I found, N=8 if HT is not active based on the broadwell，,
+>
+> > > such as CPU E7-8890 v4 @ 2.20GHz
+>
+> > >
+>
+> > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 -hda
+>
+> > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
+>
+> > > -incoming tcp::8888
+>
+> > > Completed 100 %
+>
+> > > qemu-system-x86_64: error: failed to set MSR 0x38f to 0x7000000ff
+>
+> > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+> > > kvm_put_msrs:
+>
+> > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+> > > Aborted
+>
+> > >
+>
+> > > So make number of pmc configurable to vm ? Any better idea ?
+>
+> >
+>
+> > Coincidentally we hit a similar problem a few days ago with -cpu host  -
+>
+> > it took me
+>
+> > quite a while to spot the difference between the machines was the source
+>
+> > had hyperthreading disabled.
+>
+> >
+>
+> > An option to set the number of counters makes sense to me; but I wonder
+>
+> > how many other options we need as well.  Also, I'm not sure there's any
+>
+> > easy way for libvirt etc to figure out how many counters a host supports -
+>
+> > it's not in /proc/cpuinfo.
+>
+>
+>
+> We actually try to avoid /proc/cpuinfo whereever possible. We do direct
+>
+> CPUID asm instructions to identify features, and prefer to use
+>
+> /sys/devices/system/cpu if that has suitable data
+>
+>
+>
+> Where do the PMC counts come from originally ? CPUID or something else ?
+>
+>
+Yes, they're bits 8..15 of CPUID leaf 0xa
+Ok, that's easy enough for libvirt to detect then. More a question of what
+libvirt should then do this with the info....
+
+Regards,
+Daniel
+-- 
+|:
+https://berrange.com
+-o-
+https://www.flickr.com/photos/dberrange
+:|
+|:
+https://libvirt.org
+-o-
+https://fstop138.berrange.com
+:|
+|:
+https://entangle-photo.org
+-o-
+https://www.instagram.com/dberrange
+:|
+
+>
+-----Original Message-----
+>
+From: Daniel P. Berrange [
+mailto:address@hidden
+>
+Sent: Monday, April 24, 2017 6:34 PM
+>
+To: Dr. David Alan Gilbert
+>
+Cc: Zhuangyanying; Zhanghailiang; wangxin (U); address@hidden;
+>
+Gonglei (Arei); Huangzhichao; address@hidden
+>
+Subject: Re: [Qemu-devel] [BUG] Migrate failes between boards with different
+>
+PMC counts
+>
+>
+On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
+>
+> * Daniel P. Berrange (address@hidden) wrote:
+>
+> > On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
+>
+> > > * Zhuangyanying (address@hidden) wrote:
+>
+> > > > Hi all,
+>
+> > > >
+>
+> > > > Recently, I found migration failed when enable vPMU.
+>
+> > > >
+>
+> > > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+> > > >
+>
+> > > > As long as enable vPMU, qemu will save / load the
+>
+> > > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
+>
+migration.
+>
+> > > > But global_ctrl generated based on cpuid(0xA), the number of
+>
+> > > > general-purpose performance monitoring counters(PMC) can vary
+>
+> > > > according to Intel SDN. The number of PMC presented to vm, does
+>
+> > > > not support configuration currently, it depend on host cpuid, and
+>
+> > > > enable
+>
+all pmc defaultly at KVM. It cause migration to fail between boards with
+>
+different PMC counts.
+>
+> > > >
+>
+> > > > The return value of cpuid (0xA) is different dur to cpu, according to
+>
+> > > > Intel
+>
+SDN，18-10 Vol. 3B:
+>
+> > > >
+>
+> > > > Note: The number of general-purpose performance monitoring
+>
+> > > > counters (i.e. N in Figure 18-9) can vary across processor
+>
+> > > > generations within a processor family, across processor
+>
+> > > > families, or could be different depending on the configuration
+>
+> > > > chosen at boot time in the BIOS regarding Intel Hyper Threading
+>
+> > > > Technology, (e.g. N=2 for 45 nm Intel Atom processors; N =4 for
+>
+processors based on the Nehalem microarchitecture; for processors based on
+>
+the Sandy Bridge microarchitecture, N = 4 if Intel Hyper Threading Technology
+>
+is active and N=8 if not active).
+>
+> > > >
+>
+> > > > Also I found, N=8 if HT is not active based on the broadwell，,
+>
+> > > > such as CPU E7-8890 v4 @ 2.20GHz
+>
+> > > >
+>
+> > > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m
+>
+> > > > 4096 -hda
+>
+> > > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
+>
+> > > > -incoming tcp::8888 Completed 100 %
+>
+> > > > qemu-system-x86_64: error: failed to set MSR 0x38f to
+>
+> > > > 0x7000000ff
+>
+> > > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+kvm_put_msrs:
+>
+> > > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+> > > > Aborted
+>
+> > > >
+>
+> > > > So make number of pmc configurable to vm ? Any better idea ?
+>
+> > >
+>
+> > > Coincidentally we hit a similar problem a few days ago with -cpu
+>
+> > > host  - it took me quite a while to spot the difference between
+>
+> > > the machines was the source had hyperthreading disabled.
+>
+> > >
+>
+> > > An option to set the number of counters makes sense to me; but I
+>
+> > > wonder how many other options we need as well.  Also, I'm not sure
+>
+> > > there's any easy way for libvirt etc to figure out how many
+>
+> > > counters a host supports - it's not in /proc/cpuinfo.
+>
+> >
+>
+> > We actually try to avoid /proc/cpuinfo whereever possible. We do
+>
+> > direct CPUID asm instructions to identify features, and prefer to
+>
+> > use /sys/devices/system/cpu if that has suitable data
+>
+> >
+>
+> > Where do the PMC counts come from originally ? CPUID or something
+>
+else ?
+>
+>
+>
+> Yes, they're bits 8..15 of CPUID leaf 0xa
+>
+>
+Ok, that's easy enough for libvirt to detect then. More a question of what
+>
+libvirt
+>
+should then do this with the info....
+>
+Do you mean to do a validation at the begining of migration? in 
+qemuMigrationBakeCookie() & qemuMigrationEatCookie(), if the PMC numbers are 
+not equal, just quit migration?
+It maybe a good enough first edition.
+But for a further better edition, maybe it's better to support Heterogeneous 
+migration I think, so we might need to make PMC number configrable, then we 
+need to modify KVM/qemu as well.
+
+Regards,
+-Zhuang Yanying
+
+* Zhuangyanying (address@hidden) wrote:
+>
+>
+>
+> -----Original Message-----
+>
+> From: Daniel P. Berrange [
+mailto:address@hidden
+>
+> Sent: Monday, April 24, 2017 6:34 PM
+>
+> To: Dr. David Alan Gilbert
+>
+> Cc: Zhuangyanying; Zhanghailiang; wangxin (U); address@hidden;
+>
+> Gonglei (Arei); Huangzhichao; address@hidden
+>
+> Subject: Re: [Qemu-devel] [BUG] Migrate failes between boards with different
+>
+> PMC counts
+>
+>
+>
+> On Mon, Apr 24, 2017 at 11:27:16AM +0100, Dr. David Alan Gilbert wrote:
+>
+> > * Daniel P. Berrange (address@hidden) wrote:
+>
+> > > On Mon, Apr 24, 2017 at 10:23:21AM +0100, Dr. David Alan Gilbert wrote:
+>
+> > > > * Zhuangyanying (address@hidden) wrote:
+>
+> > > > > Hi all,
+>
+> > > > >
+>
+> > > > > Recently, I found migration failed when enable vPMU.
+>
+> > > > >
+>
+> > > > > migrate vPMU state was introduced in linux-3.10 + qemu-1.7.
+>
+> > > > >
+>
+> > > > > As long as enable vPMU, qemu will save / load the
+>
+> > > > > vmstate_msr_architectural_pmu(msr_global_ctrl) register during the
+>
+> migration.
+>
+> > > > > But global_ctrl generated based on cpuid(0xA), the number of
+>
+> > > > > general-purpose performance monitoring counters(PMC) can vary
+>
+> > > > > according to Intel SDN. The number of PMC presented to vm, does
+>
+> > > > > not support configuration currently, it depend on host cpuid, and
+>
+> > > > > enable
+>
+> all pmc defaultly at KVM. It cause migration to fail between boards with
+>
+> different PMC counts.
+>
+> > > > >
+>
+> > > > > The return value of cpuid (0xA) is different dur to cpu, according
+>
+> > > > > to Intel
+>
+> SDN，18-10 Vol. 3B:
+>
+> > > > >
+>
+> > > > > Note: The number of general-purpose performance monitoring
+>
+> > > > > counters (i.e. N in Figure 18-9) can vary across processor
+>
+> > > > > generations within a processor family, across processor
+>
+> > > > > families, or could be different depending on the configuration
+>
+> > > > > chosen at boot time in the BIOS regarding Intel Hyper Threading
+>
+> > > > > Technology, (e.g. N=2 for 45 nm Intel Atom processors; N =4 for
+>
+> processors based on the Nehalem microarchitecture; for processors based on
+>
+> the Sandy Bridge microarchitecture, N = 4 if Intel Hyper Threading
+>
+> Technology
+>
+> is active and N=8 if not active).
+>
+> > > > >
+>
+> > > > > Also I found, N=8 if HT is not active based on the broadwell，,
+>
+> > > > > such as CPU E7-8890 v4 @ 2.20GHz
+>
+> > > > >
+>
+> > > > > # ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m
+>
+> > > > > 4096 -hda
+>
+> > > > > /data/zyy/test_qemu.img.sles12sp1 -vnc :99 -cpu kvm64,pmu=true
+>
+> > > > > -incoming tcp::8888 Completed 100 %
+>
+> > > > > qemu-system-x86_64: error: failed to set MSR 0x38f to
+>
+> > > > > 0x7000000ff
+>
+> > > > > qemu-system-x86_64: /data/zyy/git/test/qemu/target/i386/kvm.c:1833:
+>
+> kvm_put_msrs:
+>
+> > > > > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
+>
+> > > > > Aborted
+>
+> > > > >
+>
+> > > > > So make number of pmc configurable to vm ? Any better idea ?
+>
+> > > >
+>
+> > > > Coincidentally we hit a similar problem a few days ago with -cpu
+>
+> > > > host  - it took me quite a while to spot the difference between
+>
+> > > > the machines was the source had hyperthreading disabled.
+>
+> > > >
+>
+> > > > An option to set the number of counters makes sense to me; but I
+>
+> > > > wonder how many other options we need as well.  Also, I'm not sure
+>
+> > > > there's any easy way for libvirt etc to figure out how many
+>
+> > > > counters a host supports - it's not in /proc/cpuinfo.
+>
+> > >
+>
+> > > We actually try to avoid /proc/cpuinfo whereever possible. We do
+>
+> > > direct CPUID asm instructions to identify features, and prefer to
+>
+> > > use /sys/devices/system/cpu if that has suitable data
+>
+> > >
+>
+> > > Where do the PMC counts come from originally ? CPUID or something
+>
+> else ?
+>
+> >
+>
+> > Yes, they're bits 8..15 of CPUID leaf 0xa
+>
+>
+>
+> Ok, that's easy enough for libvirt to detect then. More a question of what
+>
+> libvirt
+>
+> should then do this with the info....
+>
+>
+>
+>
+Do you mean to do a validation at the begining of migration? in
+>
+qemuMigrationBakeCookie() & qemuMigrationEatCookie(), if the PMC numbers are
+>
+not equal, just quit migration?
+>
+It maybe a good enough first edition.
+>
+But for a further better edition, maybe it's better to support Heterogeneous
+>
+migration I think, so we might need to make PMC number configrable, then we
+>
+need to modify KVM/qemu as well.
+Yes agreed; the only thing I wanted to check was that libvirt would have enough
+information to be able to use any feature we added to QEMU.
+
+Dave
+
+>
+Regards,
+>
+-Zhuang Yanying
+--
+Dr. David Alan Gilbert / address@hidden / Manchester, UK
+
diff --git a/results/classifier/zero-shot/010/review/99674399 b/results/classifier/zero-shot/010/review/99674399
new file mode 100644
index 00000000..2f8918a2
--- /dev/null
+++ b/results/classifier/zero-shot/010/review/99674399
@@ -0,0 +1,172 @@
+permissions: 0.896
+device: 0.886
+other: 0.883
+debug: 0.857
+performance: 0.845
+semantic: 0.822
+boot: 0.822
+PID: 0.812
+graphic: 0.794
+files: 0.787
+socket: 0.747
+network: 0.711
+KVM: 0.698
+vnc: 0.673
+debug: 0.850
+KVM: 0.215
+files: 0.132
+performance: 0.099
+PID: 0.059
+semantic: 0.029
+boot: 0.016
+other: 0.013
+socket: 0.011
+device: 0.010
+vnc: 0.007
+graphic: 0.003
+network: 0.002
+permissions: 0.001
+
+[BUG] qemu crashes on assertion in cpu_asidx_from_attrs when cpu is in smm mode
+
+Hi all!
+
+First, I see this issue:
+https://gitlab.com/qemu-project/qemu/-/issues/1198
+. 
+where some kvm/hardware failure leads to guest crash, and finally to this 
+assertion:
+
+   cpu_asidx_from_attrs: Assertion `ret < cpu->num_ases && ret >= 0' failed.
+
+But in the ticket the talk is about the guest crash and fixing the kernel, not 
+about the final QEMU assertion (which definitely show that something should be 
+fixed in QEMU code too).
+
+
+We've faced same stack one time:
+
+(gdb) bt
+#0  raise () from /lib/x86_64-linux-gnu/libc.so.6
+#1  abort () from /lib/x86_64-linux-gnu/libc.so.6
+#2  ?? () from /lib/x86_64-linux-gnu/libc.so.6
+#3  __assert_fail () from /lib/x86_64-linux-gnu/libc.so.6
+#4  cpu_asidx_from_attrs  at ../hw/core/cpu-sysemu.c:76
+#5  cpu_memory_rw_debug  at ../softmmu/physmem.c:3529
+#6  x86_cpu_dump_state  at ../target/i386/cpu-dump.c:560
+#7  kvm_cpu_exec  at ../accel/kvm/kvm-all.c:3000
+#8  kvm_vcpu_thread_fn  at ../accel/kvm/kvm-accel-ops.c:51
+#9  qemu_thread_start  at ../util/qemu-thread-posix.c:505
+#10 start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
+#11 clone () from /lib/x86_64-linux-gnu/libc.so.6
+
+
+And what I see:
+
+static inline int x86_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs)
+{
+    return !!attrs.secure;
+}
+
+int cpu_asidx_from_attrs(CPUState *cpu, MemTxAttrs attrs)
+{
+    int ret = 0;
+
+    if (cpu->cc->sysemu_ops->asidx_from_attrs) {
+        ret = cpu->cc->sysemu_ops->asidx_from_attrs(cpu, attrs);
+        assert(ret < cpu->num_ases && ret >= 0);         <<<<<<<<<<<<<<<<<
+    }
+    return ret;
+}
+
+(gdb) p cpu->num_ases
+$3 = 1
+
+(gdb) fr 5
+#5  0x00005578c8814ba3 in cpu_memory_rw_debug (cpu=c...
+(gdb) p attrs
+$6 = {unspecified = 0, secure = 1, user = 0, memory = 0, requester_id = 0, 
+byte_swap = 0, target_tlb_bit0 = 0, target_tlb_bit1 = 0, target_tlb_bit2 = 0}
+
+so .secure is 1, therefore ret is 1, in the same time num_ases is 1 too and 
+assertion fails.
+
+
+
+Where is .secure from?
+
+static inline MemTxAttrs cpu_get_mem_attrs(CPUX86State *env)
+{
+    return ((MemTxAttrs) { .secure = (env->hflags & HF_SMM_MASK) != 0 });
+}
+
+Ok, it means we in SMM mode.
+
+
+
+On the other hand, it seems that num_ases seems to be always 1 for x86:
+
+vsementsov@vsementsov-lin:~/work/src/qemu/yc-7.2$ git grep 'num_ases = '
+cpu.c:    cpu->num_ases = 0;
+softmmu/cpus.c:        cpu->num_ases = 1;
+target/arm/cpu.c:        cs->num_ases = 3 + has_secure;
+target/arm/cpu.c:        cs->num_ases = 1 + has_secure;
+target/i386/tcg/sysemu/tcg-cpu.c:    cs->num_ases = 2;
+
+
+So, something is wrong around cpu->num_ases and x86_asidx_from_attrs() which 
+may return more in SMM mode.
+
+
+The stack starts in
+//7  0x00005578c882f539 in kvm_cpu_exec (cpu=cpu@entry=0x5578ca2eb340) at 
+../accel/kvm/kvm-all.c:3000
+    if (ret < 0) {
+        cpu_dump_state(cpu, stderr, CPU_DUMP_CODE);
+        vm_stop(RUN_STATE_INTERNAL_ERROR);
+    }
+
+So that was some kvm error, and we decided to call cpu_dump_state(). And it 
+crashes. cpu_dump_state() is also called from hmp_info_registers, so I can 
+reproduce the crash with a tiny patch to master (as only CPU_DUMP_CODE path 
+calls cpu_memory_rw_debug(), as it is in kvm_cpu_exec()):
+
+diff --git a/monitor/hmp-cmds-target.c b/monitor/hmp-cmds-target.c
+index ff01cf9d8d..dcf0189048 100644
+--- a/monitor/hmp-cmds-target.c
++++ b/monitor/hmp-cmds-target.c
+@@ -116,7 +116,7 @@ void hmp_info_registers(Monitor *mon, const QDict *qdict)
+         }
+
+         monitor_printf(mon, "\nCPU#%d\n", cs->cpu_index);
+-        cpu_dump_state(cs, NULL, CPU_DUMP_FPU);
++        cpu_dump_state(cs, NULL, CPU_DUMP_CODE);
+     }
+ }
+
+
+Than run
+
+yes "info registers" | ./build/qemu-system-x86_64 -accel kvm -monitor stdio \
+   -global driver=cfi.pflash01,property=secure,value=on \
+   -blockdev "{'driver': 'file', 'filename': 
+'/usr/share/OVMF/OVMF_CODE_4M.secboot.fd', 'node-name': 'ovmf-code', 'read-only': 
+true}" \
+   -blockdev "{'driver': 'file', 'filename': '/usr/share/OVMF/OVMF_VARS_4M.fd', 
+'node-name': 'ovmf-vars', 'read-only': true}" \
+   -machine q35,smm=on,pflash0=ovmf-code,pflash1=ovmf-vars -m 2G -nodefaults
+
+And after some time (less than 20 seconds for me) it leads to
+
+qemu-system-x86_64: ../hw/core/cpu-sysemu.c:76: cpu_asidx_from_attrs: Assertion `ret < 
+cpu->num_ases && ret >= 0' failed.
+Aborted (core dumped)
+
+
+I've no idea how to correctly fix this bug, but I hope that my reproducer and 
+investigation will help a bit.
+
+--
+Best regards,
+Vladimir
+
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_addsubps b/results/classifier/zero-shot/010/semantic/gitlab_semantic_addsubps
new file mode 100644
index 00000000..165411cb
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_addsubps
@@ -0,0 +1,52 @@
+semantic: 0.974
+device: 0.758
+other: 0.732
+graphic: 0.700
+debug: 0.650
+performance: 0.552
+vnc: 0.544
+boot: 0.465
+permissions: 0.443
+socket: 0.426
+network: 0.393
+PID: 0.358
+files: 0.280
+KVM: 0.192
+semantic: 0.981
+debug: 0.106
+files: 0.031
+other: 0.027
+PID: 0.014
+performance: 0.010
+network: 0.006
+device: 0.004
+permissions: 0.004
+boot: 0.004
+socket: 0.003
+vnc: 0.002
+graphic: 0.002
+KVM: 0.002
+
+x86 SSE/SSE2/SSE3 instruction semantic bugs with NaN
+
+Description of problem
+The result of SSE/SSE2/SSE3 instructions with NaN is different from the CPU. From Intel manual Volume 1 Appendix D.4.2.2, they defined the behavior of such instructions with NaN. But I think QEMU did not implement this semantic exactly because the byte result is different.
+
+Steps to reproduce
+
+Compile this code
+
+void main() {
+    asm("mov rax, 0x000000007fffffff; push rax; mov rax, 0x00000000ffffffff; push rax; movdqu XMM1, [rsp];");
+    asm("mov rax, 0x2e711de7aa46af1a; push rax; mov rax, 0x7fffffff7fffffff; push rax; movdqu XMM2, [rsp];");
+    asm("addsubps xmm1, xmm2");
+}
+
+Execute and compare the result with the CPU. This problem happens with other SSE/SSE2/SSE3 instructions specified in the manual, Volume 1 Appendix D.4.2.2.
+
+CPU xmm1[3] = 0xffffffff
+
+QEMU xmm1[3] = 0x7fffffff
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_adox b/results/classifier/zero-shot/010/semantic/gitlab_semantic_adox
new file mode 100644
index 00000000..7919bf6c
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_adox
@@ -0,0 +1,65 @@
+semantic: 0.990
+graphic: 0.782
+device: 0.776
+debug: 0.706
+vnc: 0.663
+boot: 0.599
+socket: 0.556
+permissions: 0.500
+performance: 0.460
+network: 0.426
+files: 0.374
+PID: 0.343
+other: 0.286
+KVM: 0.240
+semantic: 0.984
+debug: 0.322
+other: 0.031
+files: 0.023
+performance: 0.015
+PID: 0.007
+device: 0.005
+KVM: 0.003
+network: 0.002
+boot: 0.002
+graphic: 0.002
+permissions: 0.002
+socket: 0.002
+vnc: 0.001
+
+x86 ADOX and ADCX semantic bug
+Description of problem
+The result of instruction ADOX and ADCX are different from the CPU. The value of one of EFLAGS is different.
+
+Steps to reproduce
+
+Compile this code
+
+
+void main() {
+    asm("push 512; popfq;");
+    asm("mov rax, 0xffffffff84fdbf24");
+    asm("mov rbx, 0xb197d26043bec15d");
+    asm("adox eax, ebx");
+}
+
+
+
+Execute and compare the result with the CPU. This problem happens with ADCX, too (with CF).
+
+CPU
+
+OF = 0
+
+
+QEMU
+
+OF = 1
+
+
+
+
+
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_bextr b/results/classifier/zero-shot/010/semantic/gitlab_semantic_bextr
new file mode 100644
index 00000000..ff13d538
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_bextr
@@ -0,0 +1,54 @@
+semantic: 0.993
+graphic: 0.790
+device: 0.717
+debug: 0.603
+boot: 0.516
+vnc: 0.471
+socket: 0.397
+PID: 0.234
+performance: 0.233
+network: 0.219
+permissions: 0.188
+other: 0.099
+files: 0.099
+KVM: 0.091
+semantic: 0.982
+debug: 0.687
+other: 0.037
+files: 0.029
+performance: 0.017
+PID: 0.008
+device: 0.007
+network: 0.006
+permissions: 0.002
+socket: 0.002
+KVM: 0.002
+graphic: 0.002
+boot: 0.002
+vnc: 0.001
+
+x86 BEXTR semantic bug
+Description of problem
+The result of instruction BEXTR is different with from the CPU. The value of destination register is different. I think QEMU does not consider the operand size limit.
+
+Steps to reproduce
+
+Compile this code
+
+void main() {
+    asm("mov rax, 0x17b3693f77fb6e9");
+    asm("mov rbx, 0x8f635a775ad3b9b4");
+    asm("mov rcx, 0xb717b75da9983018");
+    asm("bextr eax, ebx, ecx");
+}
+
+Execute and compare the result with the CPU.
+
+CPU
+RAX = 0x5a
+
+QEMU
+RAX = 0x635a775a
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsi b/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsi
new file mode 100644
index 00000000..b888ffb1
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsi
@@ -0,0 +1,49 @@
+semantic: 0.983
+graphic: 0.873
+device: 0.790
+socket: 0.764
+vnc: 0.756
+boot: 0.678
+network: 0.672
+performance: 0.656
+files: 0.633
+permissions: 0.619
+other: 0.609
+debug: 0.525
+PID: 0.488
+KVM: 0.412
+semantic: 0.981
+debug: 0.206
+other: 0.047
+performance: 0.033
+files: 0.026
+PID: 0.009
+device: 0.006
+network: 0.004
+permissions: 0.003
+boot: 0.003
+KVM: 0.003
+graphic: 0.003
+socket: 0.002
+vnc: 0.001
+
+x86 BLSI and BLSR semantic bug
+Description of problem
+The result of instruction BLSI and BLSR is different from the CPU. The value of CF is different.
+
+Steps to reproduce
+
+Compile this code
+
+
+void main() {
+    asm("blsi rax, rbx");
+}
+
+
+
+Execute and compare the result with the CPU. The value of CF is exactly the opposite. This problem happens with BLSR, too.
+
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsmsk b/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsmsk
new file mode 100644
index 00000000..9995091b
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_blsmsk
@@ -0,0 +1,56 @@
+semantic: 0.987
+device: 0.743
+graphic: 0.735
+vnc: 0.612
+socket: 0.607
+boot: 0.585
+debug: 0.428
+permissions: 0.370
+network: 0.366
+files: 0.340
+PID: 0.289
+other: 0.269
+performance: 0.268
+KVM: 0.163
+semantic: 0.987
+debug: 0.389
+other: 0.035
+files: 0.027
+performance: 0.021
+device: 0.009
+PID: 0.008
+KVM: 0.004
+network: 0.004
+permissions: 0.003
+socket: 0.003
+boot: 0.003
+graphic: 0.002
+vnc: 0.001
+
+x86 BLSMSK semantic bug
+Description of problem
+The result of instruction BLSMSK is different with from the CPU. The value of CF is different.
+
+Steps to reproduce
+
+Compile this code
+
+void main() {
+    asm("mov rax, 0x65b2e276ad27c67");
+    asm("mov rbx, 0x62f34955226b2b5d");
+    asm("blsmsk eax, ebx");
+}
+
+Execute and compare the result with the CPU.
+
+CPU
+
+CF = 0
+
+
+QEMU
+
+CF = 1
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
diff --git a/results/classifier/zero-shot/010/semantic/gitlab_semantic_bzhi b/results/classifier/zero-shot/010/semantic/gitlab_semantic_bzhi
new file mode 100644
index 00000000..db4bd3e4
--- /dev/null
+++ b/results/classifier/zero-shot/010/semantic/gitlab_semantic_bzhi
@@ -0,0 +1,67 @@
+semantic: 0.920
+graphic: 0.652
+device: 0.589
+vnc: 0.287
+debug: 0.256
+boot: 0.220
+network: 0.203
+socket: 0.198
+performance: 0.165
+PID: 0.130
+permissions: 0.069
+other: 0.064
+KVM: 0.064
+files: 0.051
+semantic: 0.987
+debug: 0.282
+other: 0.033
+files: 0.022
+performance: 0.021
+PID: 0.008
+device: 0.008
+KVM: 0.004
+network: 0.004
+socket: 0.003
+permissions: 0.003
+boot: 0.003
+graphic: 0.002
+vnc: 0.001
+
+x86 BZHI semantic bug
+Description of problem
+The result of instruction BZHI is different from the CPU. The value of destination register and SF of EFLAGS are different.
+
+Steps to reproduce
+
+Compile this code
+
+
+void main() {
+    asm("mov rax, 0xb1aa9da2fe33fe3");
+    asm("mov rbx, 0x80000000ffffffff");
+    asm("mov rcx, 0xf3fce8829b99a5c6");
+    asm("bzhi rax, rbx, rcx");
+}
+
+
+
+Execute and compare the result with the CPU.
+
+CPU
+
+RAX = 0x0x80000000ffffffff
+SF = 1
+
+
+QEMU
+
+RAX = 0xffffffff
+SF = 0
+
+
+
+
+
+
+Additional information
+This bug is discovered by research conducted by KAIST SoftSec.
-- 
cgit 1.4.1