Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200720' into staging

target-arm queue:
 * virt: Don't enable MTE emulation by default
 * virt: Diagnose attempts to use MTE with memory-hotplug or KVM
   (rather than silently not working correctly)
 * util: Implement qemu_get_thread_id() for OpenBSD
 * qdev: Add doc comments for qdev_unrealize and GPIO functions,
   and standardize on doc-comments-in-header-file
 * hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
 * docs/system: Document canon-a1100, collie, gumstix, virt boards

# gpg: Signature made Mon 20 Jul 2020 13:55:36 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200720:
  docs/system: Document the arm virt board
  docs/system: Briefly document gumstix boards
  docs/system: Briefly document collie board
  docs/system: Briefly document canon-a1100 board
  hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
  qdev: Document GPIO related functions
  qdev: Document qdev_unrealize()
  qdev: Move doc comments from qdev.c to qdev-core.h
  util: Implement qemu_get_thread_id() for OpenBSD
  hw/arm/virt: Disable memory hotplug when MTE is enabled
  hw/arm/virt: Error for MTE enabled with KVM
  hw/arm/virt: Enable MTE via a machine property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

5 files changed, 213 insertions, 0 deletions

diff --git a/docs/system/arm/collie.rst b/docs/system/arm/collie.rst
new file mode 100644
index 0000000000..5cc67b6d1b
--- /dev/null
+++ b/docs/system/arm/collie.rst
@@ -0,0 +1,16 @@
+Sharp Zaurus SL-5500 (``collie``)
+=================================
+
+This machine is a model of the Sharp Zaurus SL-5500, which was
+a 1990s PDA based on the StrongARM SA1110.
+
+Implemented devices:
+
+ * NOR flash
+ * Interrupt controller
+ * Timer
+ * RTC
+ * GPIO
+ * Peripheral Pin Controller (PPC)
+ * UARTs
+ * Synchronous Serial Ports (SSP)
diff --git a/docs/system/arm/digic.rst b/docs/system/arm/digic.rst
new file mode 100644
index 0000000000..2b3520ff5e
--- /dev/null
+++ b/docs/system/arm/digic.rst
@@ -0,0 +1,11 @@
+Canon A1100 (``canon-a1100``)
+=============================
+
+This machine is a model of the Canon PowerShot A1100 camera, which
+uses the DIGIC SoC. This model is based on reverse engineering efforts
+by the contributors to the `CHDK <http://chdk.wikia.com/>`_ and
+`Magic Lantern <http://www.magiclantern.fm/>`_ projects.
+
+The emulation is incomplete. In particular it can't be used
+to run the original camera firmware, but it can successfully run
+an experimental version of the `barebox bootloader <http://www.barebox.org/>`_.
diff --git a/docs/system/arm/gumstix.rst b/docs/system/arm/gumstix.rst
new file mode 100644
index 0000000000..cb373139dc
--- /dev/null
+++ b/docs/system/arm/gumstix.rst
@@ -0,0 +1,21 @@
+Gumstix Connex and Verdex (``connex``, ``verdex``)
+==================================================
+
+These machines model the Gumstix Connex and Verdex boards.
+The Connex has a PXA255 CPU and the Verdex has a PXA270.
+
+Implemented devices:
+
+ * NOR flash
+ * SMC91C111 ethernet
+ * Interrupt controller
+ * DMA
+ * Timer
+ * GPIO
+ * MMC/SD card
+ * Fast infra-red communications port (FIR)
+ * LCD controller
+ * Synchronous serial ports (SPI)
+ * PCMCIA interface
+ * I2C
+ * I2S
diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst
new file mode 100644
index 0000000000..6621ab7205
--- /dev/null
+++ b/docs/system/arm/virt.rst
@@ -0,0 +1,161 @@
+'virt' generic virtual platform (``virt``)
+==========================================
+
+The `virt` board is a platform which does not correspond to any
+real hardware; it is designed for use in virtual machines.
+It is the recommended board type if you simply want to run
+a guest such as Linux and do not care about reproducing the
+idiosyncrasies and limitations of a particular bit of real-world
+hardware.
+
+This is a "versioned" board model, so as well as the ``virt`` machine
+type itself (which may have improvements, bugfixes and other minor
+changes between QEMU versions) a version is provided that guarantees
+to have the same behaviour as that of previous QEMU releases, so
+that VM migration will work between QEMU versions. For instance the
+``virt-5.0`` machine type will behave like the ``virt`` machine from
+the QEMU 5.0 release, and migration should work between ``virt-5.0``
+of the 5.0 release and ``virt-5.0`` of the 5.1 release. Migration
+is not guaranteed to work between different QEMU releases for
+the non-versioned ``virt`` machine type.
+
+Supported devices
+"""""""""""""""""
+
+The virt board supports:
+
+- PCI/PCIe devices
+- Flash memory
+- One PL011 UART
+- An RTC
+- The fw_cfg device that allows a guest to obtain data from QEMU
+- A PL061 GPIO controller
+- An optional SMMUv3 IOMMU
+- hotpluggable DIMMs
+- hotpluggable NVDIMMs
+- An MSI controller (GICv2M or ITS). GICv2M is selected by default along
+  with GICv2. ITS is selected by default with GICv3 (>= virt-2.7). Note
+  that ITS is not modeled in TCG mode.
+- 32 virtio-mmio transport devices
+- running guests using the KVM accelerator on aarch64 hardware
+- large amounts of RAM (at least 255GB, and more if using highmem)
+- many CPUs (up to 512 if using a GICv3 and highmem)
+- Secure-World-only devices if the CPU has TrustZone:
+
+  - A second PL011 UART
+  - A secure flash memory
+  - 16MB of secure RAM
+
+Supported guest CPU types:
+
+- ``cortex-a7`` (32-bit)
+- ``cortex-a15`` (32-bit; the default)
+- ``cortex-a53`` (64-bit)
+- ``cortex-a57`` (64-bit)
+- ``cortex-a72`` (64-bit)
+- ``host`` (with KVM only)
+- ``max`` (same as ``host`` for KVM; best possible emulation with TCG)
+
+Note that the default is ``cortex-a15``, so for an AArch64 guest you must
+specify a CPU type.
+
+Graphics output is available, but unlike the x86 PC machine types
+there is no default display device enabled: you should select one from
+the Display devices section of "-device help". The recommended option
+is ``virtio-gpu-pci``; this is the only one which will work correctly
+with KVM. You may also need to ensure your guest kernel is configured
+with support for this; see below.
+
+Machine-specific options
+""""""""""""""""""""""""
+
+The following machine-specific options are supported:
+
+secure
+  Set ``on``/``off`` to enable/disable emulating a guest CPU which implements the
+  Arm Security Extensions (TrustZone). The default is ``off``.
+
+virtualization
+  Set ``on``/``off`` to enable/disable emulating a guest CPU which implements the
+  Arm Virtualization Extensions. The default is ``off``.
+
+highmem
+  Set ``on``/``off`` to enable/disable placing devices and RAM in physical
+  address space above 32 bits. The default is ``on`` for machine types
+  later than ``virt-2.12``.
+
+gic-version
+  Specify the version of the Generic Interrupt Controller (GIC) to provide.
+  Valid values are:
+
+  ``2``
+    GICv2
+  ``3``
+    GICv3
+  ``host``
+    Use the same GIC version the host provides, when using KVM
+  ``max``
+    Use the best GIC version possible (same as host when using KVM;
+    currently same as ``3``` for TCG, but this may change in future)
+
+its
+  Set ``on``/``off`` to enable/disable ITS instantiation. The default is ``on``
+  for machine types later than ``virt-2.7``.
+
+iommu
+  Set the IOMMU type to create for the guest. Valid values are:
+
+  ``none``
+    Don't create an IOMMU (the default)
+  ``smmuv3``
+    Create an SMMUv3
+
+ras
+  Set ``on``/``off`` to enable/disable reporting host memory errors to a guest
+  using ACPI and guest external abort exceptions. The default is off.
+
+Linux guest kernel configuration
+""""""""""""""""""""""""""""""""
+
+The 'defconfig' for Linux arm and arm64 kernels should include the
+right device drivers for virtio and the PCI controller; however some older
+kernel versions, especially for 32-bit Arm, did not have everything
+enabled by default. If you're not seeing PCI devices that you expect,
+then check that your guest config has::
+
+  CONFIG_PCI=y
+  CONFIG_VIRTIO_PCI=y
+  CONFIG_PCI_HOST_GENERIC=y
+
+If you want to use the ``virtio-gpu-pci`` graphics device you will also
+need::
+
+  CONFIG_DRM=y
+  CONFIG_DRM_VIRTIO_GPU=y
+
+Hardware configuration information for bare-metal programming
+"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+
+The ``virt`` board automatically generates a device tree blob ("dtb")
+which it passes to the guest. This provides information about the
+addresses, interrupt lines and other configuration of the various devices
+in the system. Guest code can rely on and hard-code the following
+addresses:
+
+- Flash memory starts at address 0x0000_0000
+
+- RAM starts at 0x4000_0000
+
+All other information about device locations may change between
+QEMU versions, so guest code must look in the DTB.
+
+QEMU supports two types of guest image boot for ``virt``, and
+the way for the guest code to locate the dtb binary differs:
+
+- For guests using the Linux kernel boot protocol (this means any
+  non-ELF file passed to the QEMU ``-kernel`` option) the address
+  of the DTB is passed in a register (``r2`` for 32-bit guests,
+  or ``x0`` for 64-bit guests)
+
+- For guests booting as "bare-metal" (any other kind of boot),
+  the DTB is at the start of RAM (0x4000_0000)
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index 1bd477a293..4c5b0e4aab 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -82,13 +82,17 @@ undocumented; you can get a complete list by running
    arm/versatile
    arm/vexpress
    arm/aspeed
+   arm/digic
    arm/musicpal
+   arm/gumstix
    arm/nseries
    arm/orangepi
    arm/palm
    arm/xscale
+   arm/collie
    arm/sx1
    arm/stellaris
+   arm/virt
 
 Arm CPU features
 ================