Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151217-1' into staging

target-arm queue:
 * i.MX CCM patches
 * support guest debug for AArch64 KVM
 * support power button on virt board via GPIO
 * clean up AArch32 singlestep code
 * raise exception on misaligned LDREX operands
 * soc-dma: use hwaddr instead of target_ulong in printf
 * explicitly mark some ARM device loads as little-endian
 * i.MX: add support for lower and upper interrupt in GPIO

# gpg: Signature made Thu 17 Dec 2015 13:38:09 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20151217-1: (25 commits)
  i.MX: Add an i.MX25 specific CCM class/instance
  i.MX: Split the CCM class into an abstract base class and a concrete class
  i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
  i.MX: Fix i.MX31 default/reset configuration
  tests/guest-debug: introduce basic gdbstub tests
  target-arm: kvm - re-inject guest debug exceptions
  target-arm: kvm - add support for HW assisted debug
  target-arm: kvm - support for single step
  target-arm: kvm - implement software breakpoints
  target-arm: kvm64 - introduce kvm_arm_init_debug()
  ARM: Virt: Add gpio-keys node for Poweroff using DT
  ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3
  ARM: ACPI: Add _E03 for Power Button
  ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection
  ACPI: Add GPIO Connection Descriptor
  ARM: ACPI: Add power button device in ACPI DSDT table
  ARM: ACPI: Add GPIO controller in ACPI DSDT table
  ARM: Virt: Add a GPIO controller
  acpi: extend aml_interrupt() to support multiple irqs
  acpi: support serialized method
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 60 insertions, 0 deletions

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 9c6792cea1..acc1fcbdd1 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -52,6 +52,7 @@
 #include "kvm_arm.h"
 #include "hw/smbios/smbios.h"
 #include "qapi/visitor.h"
+#include "standard-headers/linux/input.h"
 
 /* Number of external interrupt lines to configure the GIC with */
 #define NUM_IRQS 256
@@ -120,6 +121,7 @@ static const MemMapEntry a15memmap[] = {
     [VIRT_UART] =               { 0x09000000, 0x00001000 },
     [VIRT_RTC] =                { 0x09010000, 0x00001000 },
     [VIRT_FW_CFG] =             { 0x09020000, 0x00000018 },
+    [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
     [VIRT_MMIO] =               { 0x0a000000, 0x00000200 },
     /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
     [VIRT_PLATFORM_BUS] =       { 0x0c000000, 0x02000000 },
@@ -135,6 +137,7 @@ static const int a15irqmap[] = {
     [VIRT_UART] = 1,
     [VIRT_RTC] = 2,
     [VIRT_PCIE] = 3, /* ... to 6 */
+    [VIRT_GPIO] = 7,
     [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
     [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
     [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */
@@ -538,6 +541,61 @@ static void create_rtc(const VirtBoardInfo *vbi, qemu_irq *pic)
     g_free(nodename);
 }
 
+static DeviceState *pl061_dev;
+static void virt_powerdown_req(Notifier *n, void *opaque)
+{
+    /* use gpio Pin 3 for power button event */
+    qemu_set_irq(qdev_get_gpio_in(pl061_dev, 3), 1);
+}
+
+static Notifier virt_system_powerdown_notifier = {
+    .notify = virt_powerdown_req
+};
+
+static void create_gpio(const VirtBoardInfo *vbi, qemu_irq *pic)
+{
+    char *nodename;
+    hwaddr base = vbi->memmap[VIRT_GPIO].base;
+    hwaddr size = vbi->memmap[VIRT_GPIO].size;
+    int irq = vbi->irqmap[VIRT_GPIO];
+    const char compat[] = "arm,pl061\0arm,primecell";
+
+    pl061_dev = sysbus_create_simple("pl061", base, pic[irq]);
+
+    uint32_t phandle = qemu_fdt_alloc_phandle(vbi->fdt);
+    nodename = g_strdup_printf("/pl061@%" PRIx64, base);
+    qemu_fdt_add_subnode(vbi->fdt, nodename);
+    qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
+                                 2, base, 2, size);
+    qemu_fdt_setprop(vbi->fdt, nodename, "compatible", compat, sizeof(compat));
+    qemu_fdt_setprop_cell(vbi->fdt, nodename, "#gpio-cells", 2);
+    qemu_fdt_setprop(vbi->fdt, nodename, "gpio-controller", NULL, 0);
+    qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupts",
+                           GIC_FDT_IRQ_TYPE_SPI, irq,
+                           GIC_FDT_IRQ_FLAGS_LEVEL_HI);
+    qemu_fdt_setprop_cell(vbi->fdt, nodename, "clocks", vbi->clock_phandle);
+    qemu_fdt_setprop_string(vbi->fdt, nodename, "clock-names", "apb_pclk");
+    qemu_fdt_setprop_cell(vbi->fdt, nodename, "phandle", phandle);
+
+    qemu_fdt_add_subnode(vbi->fdt, "/gpio-keys");
+    qemu_fdt_setprop_string(vbi->fdt, "/gpio-keys", "compatible", "gpio-keys");
+    qemu_fdt_setprop_cell(vbi->fdt, "/gpio-keys", "#size-cells", 0);
+    qemu_fdt_setprop_cell(vbi->fdt, "/gpio-keys", "#address-cells", 1);
+
+    qemu_fdt_add_subnode(vbi->fdt, "/gpio-keys/poweroff");
+    qemu_fdt_setprop_string(vbi->fdt, "/gpio-keys/poweroff",
+                            "label", "GPIO Key Poweroff");
+    qemu_fdt_setprop_cell(vbi->fdt, "/gpio-keys/poweroff", "linux,code",
+                          KEY_POWER);
+    qemu_fdt_setprop_cells(vbi->fdt, "/gpio-keys/poweroff",
+                           "gpios", phandle, 3, 0);
+
+    /* connect powerdown request */
+    qemu_register_powerdown_notifier(&virt_system_powerdown_notifier);
+
+    g_free(nodename);
+}
+
 static void create_virtio_devices(const VirtBoardInfo *vbi, qemu_irq *pic)
 {
     int i;
@@ -1041,6 +1099,8 @@ static void machvirt_init(MachineState *machine)
 
     create_pcie(vbi, pic, vms->highmem);
 
+    create_gpio(vbi, pic);
+
     /* Create mmio transports, so the user can create virtio backends
      * (which will be automatically plugged in to the transports). If
      * no backend is created the transport will just sit harmlessly idle.