Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND

This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed.  This replacement improves the readability and
understandability of code.

For example,

    timer_mod(fdctrl->result_timer,
	      qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));

NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.

Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

4 files changed, 12 insertions, 11 deletions

diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c
index 99ed43e3be..56844c3030 100644
--- a/hw/arm/omap1.c
+++ b/hw/arm/omap1.c
@@ -110,7 +110,7 @@ static inline uint32_t omap_timer_read(struct omap_mpu_timer_s *timer)
 
     if (timer->st && timer->enable && timer->rate)
         return timer->val - muldiv64(distance >> (timer->ptv + 1),
-                                     timer->rate, get_ticks_per_sec());
+                                     timer->rate, NANOSECONDS_PER_SECOND);
     else
         return timer->val;
 }
@@ -128,7 +128,7 @@ static inline void omap_timer_update(struct omap_mpu_timer_s *timer)
     if (timer->enable && timer->st && timer->rate) {
         timer->val = timer->reset_val;	/* Should skip this on clk enable */
         expires = muldiv64((uint64_t) timer->val << (timer->ptv + 1),
-                           get_ticks_per_sec(), timer->rate);
+                           NANOSECONDS_PER_SECOND, timer->rate);
 
         /* If timer expiry would be sooner than in about 1 ms and
          * auto-reload isn't set, then fire immediately.  This is a hack
@@ -136,10 +136,11 @@ static inline void omap_timer_update(struct omap_mpu_timer_s *timer)
          * sets the interval to a very low value and polls the status bit
          * in a busy loop when it wants to sleep just a couple of CPU
          * ticks.  */
-        if (expires > (get_ticks_per_sec() >> 10) || timer->ar)
+        if (expires > (NANOSECONDS_PER_SECOND >> 10) || timer->ar) {
             timer_mod(timer->timer, timer->time + expires);
-        else
+        } else {
             qemu_bh_schedule(timer->tick);
+        }
     } else
         timer_del(timer->timer);
 }
@@ -616,14 +617,14 @@ static void omap_ulpd_pm_write(void *opaque, hwaddr addr,
                 now -= s->ulpd_gauge_start;
 
                 /* 32-kHz ticks */
-                ticks = muldiv64(now, 32768, get_ticks_per_sec());
+                ticks = muldiv64(now, 32768, NANOSECONDS_PER_SECOND);
                 s->ulpd_pm_regs[0x00 >> 2] = (ticks >>  0) & 0xffff;
                 s->ulpd_pm_regs[0x04 >> 2] = (ticks >> 16) & 0xffff;
                 if (ticks >> 32)	/* OVERFLOW_32K */
                     s->ulpd_pm_regs[0x14 >> 2] |= 1 << 2;
 
                 /* High frequency ticks */
-                ticks = muldiv64(now, 12000000, get_ticks_per_sec());
+                ticks = muldiv64(now, 12000000, NANOSECONDS_PER_SECOND);
                 s->ulpd_pm_regs[0x08 >> 2] = (ticks >>  0) & 0xffff;
                 s->ulpd_pm_regs[0x0c >> 2] = (ticks >> 16) & 0xffff;
                 if (ticks >> 32)	/* OVERFLOW_HI_FREQ */
@@ -3029,7 +3030,7 @@ static void omap_mcbsp_source_tick(void *opaque)
 
     omap_mcbsp_rx_newdata(s);
     timer_mod(s->source_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                   get_ticks_per_sec());
+                   NANOSECONDS_PER_SECOND);
 }
 
 static void omap_mcbsp_rx_start(struct omap_mcbsp_s *s)
@@ -3075,7 +3076,7 @@ static void omap_mcbsp_sink_tick(void *opaque)
 
     omap_mcbsp_tx_newdata(s);
     timer_mod(s->sink_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                   get_ticks_per_sec());
+                   NANOSECONDS_PER_SECOND);
 }
 
 static void omap_mcbsp_tx_start(struct omap_mcbsp_s *s)
diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index 50949d06af..bf61d63b58 100644
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -405,7 +405,7 @@ static void spitz_keyboard_tick(void *opaque)
     }
 
     timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                   get_ticks_per_sec() / 32);
+                   NANOSECONDS_PER_SECOND / 32);
 }
 
 static void spitz_keyboard_pre_map(SpitzKeyboardState *s)
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 3caeb0679b..c1766f856a 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -101,7 +101,7 @@ static void gptm_reload(gptm_state *s, int n, int reset)
         tick += (int64_t)count * system_clock_scale;
     } else if (s->config == 1) {
         /* 32-bit RTC.  1Hz tick.  */
-        tick += get_ticks_per_sec();
+        tick += NANOSECONDS_PER_SECOND;
     } else if (s->mode[n] == 0xa) {
         /* PWM mode.  Not implemented.  */
     } else {
diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c
index 24240995ff..80041280e2 100644
--- a/hw/arm/strongarm.c
+++ b/hw/arm/strongarm.c
@@ -1025,7 +1025,7 @@ static void strongarm_uart_update_parameters(StrongARMUARTState *s)
     ssp.parity = parity;
     ssp.data_bits = data_bits;
     ssp.stop_bits = stop_bits;
-    s->char_transmit_time =  (get_ticks_per_sec() / speed) * frame_size;
+    s->char_transmit_time =  (NANOSECONDS_PER_SECOND / speed) * frame_size;
     if (s->chr) {
         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
     }