Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
 - Fixes a bug in printing trap causes
 - Allows 16-bit writes to the SiFive test device. This fixes the
   failure to reboot the RISC-V virt machine
 - Support for the Microchip PolarFire SoC and Icicle Kit
 - A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
  hw/riscv: Sort the Kconfig options in alphabetical order
  hw/riscv: Drop CONFIG_SIFIVE
  hw/riscv: Always build riscv_hart.c
  hw/riscv: Move sifive_test model to hw/misc
  hw/riscv: Move sifive_uart model to hw/char
  hw/riscv: Move riscv_htif model to hw/char
  hw/riscv: Move sifive_plic model to hw/intc
  hw/riscv: Move sifive_clint model to hw/intc
  hw/riscv: Move sifive_gpio model to hw/gpio
  hw/riscv: Move sifive_u_otp model to hw/misc
  hw/riscv: Move sifive_u_prci model to hw/misc
  hw/riscv: Move sifive_e_prci model to hw/misc
  hw/riscv: sifive_u: Connect a DMA controller
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/dma: Add SiFive platform DMA controller emulation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/riscv/trace-events

1 files changed, 194 insertions, 0 deletions

diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c
new file mode 100644
index 0000000000..3a00ba7f00
--- /dev/null
+++ b/hw/char/sifive_uart.c
@@ -0,0 +1,194 @@
+/*
+ * QEMU model of the UART on the SiFive E300 and U500 series SOCs.
+ *
+ * Copyright (c) 2016 Stefan O'Rear
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "hw/sysbus.h"
+#include "chardev/char.h"
+#include "chardev/char-fe.h"
+#include "hw/hw.h"
+#include "hw/irq.h"
+#include "hw/char/sifive_uart.h"
+
+/*
+ * Not yet implemented:
+ *
+ * Transmit FIFO using "qemu/fifo8.h"
+ */
+
+/* Returns the state of the IP (interrupt pending) register */
+static uint64_t uart_ip(SiFiveUARTState *s)
+{
+    uint64_t ret = 0;
+
+    uint64_t txcnt = SIFIVE_UART_GET_TXCNT(s->txctrl);
+    uint64_t rxcnt = SIFIVE_UART_GET_RXCNT(s->rxctrl);
+
+    if (txcnt != 0) {
+        ret |= SIFIVE_UART_IP_TXWM;
+    }
+    if (s->rx_fifo_len > rxcnt) {
+        ret |= SIFIVE_UART_IP_RXWM;
+    }
+
+    return ret;
+}
+
+static void update_irq(SiFiveUARTState *s)
+{
+    int cond = 0;
+    if ((s->ie & SIFIVE_UART_IE_TXWM) ||
+        ((s->ie & SIFIVE_UART_IE_RXWM) && s->rx_fifo_len)) {
+        cond = 1;
+    }
+    if (cond) {
+        qemu_irq_raise(s->irq);
+    } else {
+        qemu_irq_lower(s->irq);
+    }
+}
+
+static uint64_t
+uart_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    SiFiveUARTState *s = opaque;
+    unsigned char r;
+    switch (addr) {
+    case SIFIVE_UART_RXFIFO:
+        if (s->rx_fifo_len) {
+            r = s->rx_fifo[0];
+            memmove(s->rx_fifo, s->rx_fifo + 1, s->rx_fifo_len - 1);
+            s->rx_fifo_len--;
+            qemu_chr_fe_accept_input(&s->chr);
+            update_irq(s);
+            return r;
+        }
+        return 0x80000000;
+
+    case SIFIVE_UART_TXFIFO:
+        return 0; /* Should check tx fifo */
+    case SIFIVE_UART_IE:
+        return s->ie;
+    case SIFIVE_UART_IP:
+        return uart_ip(s);
+    case SIFIVE_UART_TXCTRL:
+        return s->txctrl;
+    case SIFIVE_UART_RXCTRL:
+        return s->rxctrl;
+    case SIFIVE_UART_DIV:
+        return s->div;
+    }
+
+    qemu_log_mask(LOG_GUEST_ERROR, "%s: bad read: addr=0x%x\n",
+                  __func__, (int)addr);
+    return 0;
+}
+
+static void
+uart_write(void *opaque, hwaddr addr,
+           uint64_t val64, unsigned int size)
+{
+    SiFiveUARTState *s = opaque;
+    uint32_t value = val64;
+    unsigned char ch = value;
+
+    switch (addr) {
+    case SIFIVE_UART_TXFIFO:
+        qemu_chr_fe_write(&s->chr, &ch, 1);
+        update_irq(s);
+        return;
+    case SIFIVE_UART_IE:
+        s->ie = val64;
+        update_irq(s);
+        return;
+    case SIFIVE_UART_TXCTRL:
+        s->txctrl = val64;
+        return;
+    case SIFIVE_UART_RXCTRL:
+        s->rxctrl = val64;
+        return;
+    case SIFIVE_UART_DIV:
+        s->div = val64;
+        return;
+    }
+    qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%x v=0x%x\n",
+                  __func__, (int)addr, (int)value);
+}
+
+static const MemoryRegionOps uart_ops = {
+    .read = uart_read,
+    .write = uart_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void uart_rx(void *opaque, const uint8_t *buf, int size)
+{
+    SiFiveUARTState *s = opaque;
+
+    /* Got a byte.  */
+    if (s->rx_fifo_len >= sizeof(s->rx_fifo)) {
+        printf("WARNING: UART dropped char.\n");
+        return;
+    }
+    s->rx_fifo[s->rx_fifo_len++] = *buf;
+
+    update_irq(s);
+}
+
+static int uart_can_rx(void *opaque)
+{
+    SiFiveUARTState *s = opaque;
+
+    return s->rx_fifo_len < sizeof(s->rx_fifo);
+}
+
+static void uart_event(void *opaque, QEMUChrEvent event)
+{
+}
+
+static int uart_be_change(void *opaque)
+{
+    SiFiveUARTState *s = opaque;
+
+    qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+        uart_be_change, s, NULL, true);
+
+    return 0;
+}
+
+/*
+ * Create UART device.
+ */
+SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
+    Chardev *chr, qemu_irq irq)
+{
+    SiFiveUARTState *s = g_malloc0(sizeof(SiFiveUARTState));
+    s->irq = irq;
+    qemu_chr_fe_init(&s->chr, chr, &error_abort);
+    qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+        uart_be_change, s, NULL, true);
+    memory_region_init_io(&s->mmio, NULL, &uart_ops, s,
+                          TYPE_SIFIVE_UART, SIFIVE_UART_MAX);
+    memory_region_add_subregion(address_space, base, &s->mmio);
+    return s;
+}