next-cube: remove overlap between next.dma and next.mmio memory regions

Change the start of the next.mmio memory region so that it follows on directly
after the next.dma memory region. Increase the address offsets in
next_mmio_read() and next_mmio_write(), and reduce the size of the next.mmio
memory region accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>

1 files changed, 14 insertions, 14 deletions

diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c
index 243d9e7e66..5f07791707 100644
--- a/hw/m68k/next-cube.c
+++ b/hw/m68k/next-cube.c
@@ -266,23 +266,23 @@ static uint64_t next_mmio_read(void *opaque, hwaddr addr, unsigned size)
     uint64_t val;
 
     switch (addr) {
-    case 0x7000:
+    case 0x2000:    /* 0x2007000 */
         /* DPRINTF("Read INT status: %x\n", s->int_status); */
         val = s->int_status;
         break;
 
-    case 0x7800:
+    case 0x2800:    /* 0x2007800 */
         DPRINTF("MMIO Read INT mask: %x\n", s->int_mask);
         val = s->int_mask;
         break;
 
-    case 0xc000 ... 0xc003:
-        val = extract32(s->scr1, (4 - (addr - 0xc000) - size) << 3,
+    case 0x7000 ... 0x7003:    /* 0x200c000 */
+        val = extract32(s->scr1, (4 - (addr - 0x7000) - size) << 3,
                         size << 3);
         break;
 
-    case 0xd000 ... 0xd003:
-        val = extract32(s->scr2, (4 - (addr - 0xd000) - size) << 3,
+    case 0x8000 ... 0x8003:    /* 0x200d000 */
+        val = extract32(s->scr2, (4 - (addr - 0x8000) - size) << 3,
                         size << 3);
         break;
 
@@ -301,25 +301,25 @@ static void next_mmio_write(void *opaque, hwaddr addr, uint64_t val,
     NeXTPC *s = NEXT_PC(opaque);
 
     switch (addr) {
-    case 0x7000:
+    case 0x2000:    /* 0x2007000 */
         DPRINTF("INT Status old: %x new: %x\n", s->int_status,
                 (unsigned int)val);
         s->int_status = val;
         break;
 
-    case 0x7800:
+    case 0x2800:    /* 0x2007800 */
         DPRINTF("INT Mask old: %x new: %x\n", s->int_mask, (unsigned int)val);
         s->int_mask  = val;
         break;
 
-    case 0xc000 ... 0xc003:
+    case 0x7000 ... 0x7003:    /* 0x200c000 */
         DPRINTF("SCR1 Write: %x\n", (unsigned int)val);
-        s->scr1 = deposit32(s->scr1, (4 - (addr - 0xc000) - size) << 3,
+        s->scr1 = deposit32(s->scr1, (4 - (addr - 0x7000) - size) << 3,
                             size << 3, val);
         break;
 
-    case 0xd000 ... 0xd003:
-        s->scr2 = deposit32(s->scr2, (4 - (addr - 0xd000) - size) << 3,
+    case 0x8000 ... 0x8003:    /* 0x200d000 */
+        s->scr2 = deposit32(s->scr2, (4 - (addr - 0x8000) - size) << 3,
                             size << 3, val);
         next_scr2_led_update(s);
         next_scr2_rtc_update(s);
@@ -897,7 +897,7 @@ static void next_pc_realize(DeviceState *dev, Error **errp)
     qdev_init_gpio_in(dev, next_irq, NEXT_NUM_IRQS);
 
     memory_region_init_io(&s->mmiomem, OBJECT(s), &next_mmio_ops, s,
-                          "next.mmio", 0xd0000);
+                          "next.mmio", 0x9000);
     memory_region_init_io(&s->scrmem, OBJECT(s), &next_scr_ops, s,
                           "next.scr", 0x20000);
     sysbus_init_mmio(sbd, &s->mmiomem);
@@ -999,7 +999,7 @@ static void next_cube_init(MachineState *machine)
     sysbus_create_simple(TYPE_NEXTFB, 0x0B000000, NULL);
 
     /* MMIO */
-    sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02000000);
+    sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02005000);
 
     /* BMAP IO - acts as a catch-all for now */
     sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 1, 0x02100000);