hw: move DMA controllers to hw/dma/, configure with default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 315 deletions

diff --git a/hw/sparc32_dma.c b/hw/sparc32_dma.c
deleted file mode 100644
index fd21533f15..0000000000
--- a/hw/sparc32_dma.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * QEMU Sparc32 DMA controller emulation
- *
- * Copyright (c) 2006 Fabrice Bellard
- *
- * Modifications:
- *  2010-Feb-14 Artyom Tarasenko : reworked irq generation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "hw/hw.h"
-#include "hw/sparc/sparc32_dma.h"
-#include "hw/sparc/sun4m.h"
-#include "hw/sysbus.h"
-#include "trace.h"
-
-/*
- * This is the DMA controller part of chip STP2000 (Master I/O), also
- * produced as NCR89C100. See
- * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
- * and
- * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
- */
-
-#define DMA_REGS 4
-#define DMA_SIZE (4 * sizeof(uint32_t))
-/* We need the mask, because one instance of the device is not page
-   aligned (ledma, start address 0x0010) */
-#define DMA_MASK (DMA_SIZE - 1)
-/* OBP says 0x20 bytes for ledma, the extras are aliased to espdma */
-#define DMA_ETH_SIZE (8 * sizeof(uint32_t))
-#define DMA_MAX_REG_OFFSET (2 * DMA_SIZE - 1)
-
-#define DMA_VER 0xa0000000
-#define DMA_INTR 1
-#define DMA_INTREN 0x10
-#define DMA_WRITE_MEM 0x100
-#define DMA_EN 0x200
-#define DMA_LOADED 0x04000000
-#define DMA_DRAIN_FIFO 0x40
-#define DMA_RESET 0x80
-
-/* XXX SCSI and ethernet should have different read-only bit masks */
-#define DMA_CSR_RO_MASK 0xfe000007
-
-typedef struct DMAState DMAState;
-
-struct DMAState {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    uint32_t dmaregs[DMA_REGS];
-    qemu_irq irq;
-    void *iommu;
-    qemu_irq gpio[2];
-    uint32_t is_ledma;
-};
-
-enum {
-    GPIO_RESET = 0,
-    GPIO_DMA,
-};
-
-/* Note: on sparc, the lance 16 bit bus is swapped */
-void ledma_memory_read(void *opaque, hwaddr addr,
-                       uint8_t *buf, int len, int do_bswap)
-{
-    DMAState *s = opaque;
-    int i;
-
-    addr |= s->dmaregs[3];
-    trace_ledma_memory_read(addr);
-    if (do_bswap) {
-        sparc_iommu_memory_read(s->iommu, addr, buf, len);
-    } else {
-        addr &= ~1;
-        len &= ~1;
-        sparc_iommu_memory_read(s->iommu, addr, buf, len);
-        for(i = 0; i < len; i += 2) {
-            bswap16s((uint16_t *)(buf + i));
-        }
-    }
-}
-
-void ledma_memory_write(void *opaque, hwaddr addr,
-                        uint8_t *buf, int len, int do_bswap)
-{
-    DMAState *s = opaque;
-    int l, i;
-    uint16_t tmp_buf[32];
-
-    addr |= s->dmaregs[3];
-    trace_ledma_memory_write(addr);
-    if (do_bswap) {
-        sparc_iommu_memory_write(s->iommu, addr, buf, len);
-    } else {
-        addr &= ~1;
-        len &= ~1;
-        while (len > 0) {
-            l = len;
-            if (l > sizeof(tmp_buf))
-                l = sizeof(tmp_buf);
-            for(i = 0; i < l; i += 2) {
-                tmp_buf[i >> 1] = bswap16(*(uint16_t *)(buf + i));
-            }
-            sparc_iommu_memory_write(s->iommu, addr, (uint8_t *)tmp_buf, l);
-            len -= l;
-            buf += l;
-            addr += l;
-        }
-    }
-}
-
-static void dma_set_irq(void *opaque, int irq, int level)
-{
-    DMAState *s = opaque;
-    if (level) {
-        s->dmaregs[0] |= DMA_INTR;
-        if (s->dmaregs[0] & DMA_INTREN) {
-            trace_sparc32_dma_set_irq_raise();
-            qemu_irq_raise(s->irq);
-        }
-    } else {
-        if (s->dmaregs[0] & DMA_INTR) {
-            s->dmaregs[0] &= ~DMA_INTR;
-            if (s->dmaregs[0] & DMA_INTREN) {
-                trace_sparc32_dma_set_irq_lower();
-                qemu_irq_lower(s->irq);
-            }
-        }
-    }
-}
-
-void espdma_memory_read(void *opaque, uint8_t *buf, int len)
-{
-    DMAState *s = opaque;
-
-    trace_espdma_memory_read(s->dmaregs[1]);
-    sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
-    s->dmaregs[1] += len;
-}
-
-void espdma_memory_write(void *opaque, uint8_t *buf, int len)
-{
-    DMAState *s = opaque;
-
-    trace_espdma_memory_write(s->dmaregs[1]);
-    sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
-    s->dmaregs[1] += len;
-}
-
-static uint64_t dma_mem_read(void *opaque, hwaddr addr,
-                             unsigned size)
-{
-    DMAState *s = opaque;
-    uint32_t saddr;
-
-    if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
-        /* aliased to espdma, but we can't get there from here */
-        /* buggy driver if using undocumented behavior, just return 0 */
-        trace_sparc32_dma_mem_readl(addr, 0);
-        return 0;
-    }
-    saddr = (addr & DMA_MASK) >> 2;
-    trace_sparc32_dma_mem_readl(addr, s->dmaregs[saddr]);
-    return s->dmaregs[saddr];
-}
-
-static void dma_mem_write(void *opaque, hwaddr addr,
-                          uint64_t val, unsigned size)
-{
-    DMAState *s = opaque;
-    uint32_t saddr;
-
-    if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
-        /* aliased to espdma, but we can't get there from here */
-        trace_sparc32_dma_mem_writel(addr, 0, val);
-        return;
-    }
-    saddr = (addr & DMA_MASK) >> 2;
-    trace_sparc32_dma_mem_writel(addr, s->dmaregs[saddr], val);
-    switch (saddr) {
-    case 0:
-        if (val & DMA_INTREN) {
-            if (s->dmaregs[0] & DMA_INTR) {
-                trace_sparc32_dma_set_irq_raise();
-                qemu_irq_raise(s->irq);
-            }
-        } else {
-            if (s->dmaregs[0] & (DMA_INTR | DMA_INTREN)) {
-                trace_sparc32_dma_set_irq_lower();
-                qemu_irq_lower(s->irq);
-            }
-        }
-        if (val & DMA_RESET) {
-            qemu_irq_raise(s->gpio[GPIO_RESET]);
-            qemu_irq_lower(s->gpio[GPIO_RESET]);
-        } else if (val & DMA_DRAIN_FIFO) {
-            val &= ~DMA_DRAIN_FIFO;
-        } else if (val == 0)
-            val = DMA_DRAIN_FIFO;
-
-        if (val & DMA_EN && !(s->dmaregs[0] & DMA_EN)) {
-            trace_sparc32_dma_enable_raise();
-            qemu_irq_raise(s->gpio[GPIO_DMA]);
-        } else if (!(val & DMA_EN) && !!(s->dmaregs[0] & DMA_EN)) {
-            trace_sparc32_dma_enable_lower();
-            qemu_irq_lower(s->gpio[GPIO_DMA]);
-        }
-
-        val &= ~DMA_CSR_RO_MASK;
-        val |= DMA_VER;
-        s->dmaregs[0] = (s->dmaregs[0] & DMA_CSR_RO_MASK) | val;
-        break;
-    case 1:
-        s->dmaregs[0] |= DMA_LOADED;
-        /* fall through */
-    default:
-        s->dmaregs[saddr] = val;
-        break;
-    }
-}
-
-static const MemoryRegionOps dma_mem_ops = {
-    .read = dma_mem_read,
-    .write = dma_mem_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-};
-
-static void dma_reset(DeviceState *d)
-{
-    DMAState *s = container_of(d, DMAState, busdev.qdev);
-
-    memset(s->dmaregs, 0, DMA_SIZE);
-    s->dmaregs[0] = DMA_VER;
-}
-
-static const VMStateDescription vmstate_dma = {
-    .name ="sparc32_dma",
-    .version_id = 2,
-    .minimum_version_id = 2,
-    .minimum_version_id_old = 2,
-    .fields      = (VMStateField []) {
-        VMSTATE_UINT32_ARRAY(dmaregs, DMAState, DMA_REGS),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static int sparc32_dma_init1(SysBusDevice *dev)
-{
-    DMAState *s = FROM_SYSBUS(DMAState, dev);
-    int reg_size;
-
-    sysbus_init_irq(dev, &s->irq);
-
-    reg_size = s->is_ledma ? DMA_ETH_SIZE : DMA_SIZE;
-    memory_region_init_io(&s->iomem, &dma_mem_ops, s, "dma", reg_size);
-    sysbus_init_mmio(dev, &s->iomem);
-
-    qdev_init_gpio_in(&dev->qdev, dma_set_irq, 1);
-    qdev_init_gpio_out(&dev->qdev, s->gpio, 2);
-
-    return 0;
-}
-
-static Property sparc32_dma_properties[] = {
-    DEFINE_PROP_PTR("iommu_opaque", DMAState, iommu),
-    DEFINE_PROP_UINT32("is_ledma", DMAState, is_ledma, 0),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void sparc32_dma_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = sparc32_dma_init1;
-    dc->reset = dma_reset;
-    dc->vmsd = &vmstate_dma;
-    dc->props = sparc32_dma_properties;
-}
-
-static const TypeInfo sparc32_dma_info = {
-    .name          = "sparc32_dma",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(DMAState),
-    .class_init    = sparc32_dma_class_init,
-};
-
-static void sparc32_dma_register_types(void)
-{
-    type_register_static(&sparc32_dma_info);
-}
-
-type_init(sparc32_dma_register_types)