Rearrange SCSI disk emulation code.

Add USB mass storage device emulation.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1940 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 395 insertions, 0 deletions

diff --git a/hw/usb-msd.c b/hw/usb-msd.c
new file mode 100644
index 0000000000..6b4cb81eb9
--- /dev/null
+++ b/hw/usb-msd.c
@@ -0,0 +1,395 @@
+/* 
+ * USB Mass Storage Device emulation
+ *
+ * Copyright (c) 2006 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the LGPL.
+ */
+
+#include "vl.h"
+
+//#define DEBUG_MSD
+
+#ifdef DEBUG_MSD
+#define DPRINTF(fmt, args...) \
+do { printf("usb-msd: " fmt , ##args); } while (0)
+#else
+#define DPRINTF(fmt, args...) do {} while(0)
+#endif
+
+/* USB requests.  */
+#define MassStorageReset  0xff
+#define GetMaxLun         0xfe
+
+enum USBMSDMode {
+    USB_MSDM_CBW, /* Command Block.  */
+    USB_MSDM_DATAOUT, /* Tranfer data to device.  */
+    USB_MSDM_DATAIN, /* Transfer data from device.  */
+    USB_MSDM_CSW /* Command Status.  */
+};
+
+typedef struct {
+    USBDevice dev;
+    enum USBMSDMode mode;
+    uint32_t data_len;
+    uint32_t tag;
+    SCSIDevice *scsi_dev;
+    int result;
+} MSDState;
+
+static const uint8_t qemu_msd_dev_descriptor[] = {
+	0x12,       /*  u8 bLength; */
+	0x01,       /*  u8 bDescriptorType; Device */
+	0x10, 0x00, /*  u16 bcdUSB; v1.0 */
+
+	0x00,	    /*  u8  bDeviceClass; */
+	0x00,	    /*  u8  bDeviceSubClass; */
+	0x00,       /*  u8  bDeviceProtocol; [ low/full speeds only ] */
+	0x08,       /*  u8  bMaxPacketSize0; 8 Bytes */
+
+        /* Vendor and product id are arbitrary.  */
+	0x00, 0x00, /*  u16 idVendor; */
+ 	0x00, 0x00, /*  u16 idProduct; */
+	0x00, 0x00, /*  u16 bcdDevice */
+
+	0x01,       /*  u8  iManufacturer; */
+	0x02,       /*  u8  iProduct; */
+	0x03,       /*  u8  iSerialNumber; */
+	0x01        /*  u8  bNumConfigurations; */
+};
+
+static const uint8_t qemu_msd_config_descriptor[] = {
+
+	/* one configuration */
+	0x09,       /*  u8  bLength; */
+	0x02,       /*  u8  bDescriptorType; Configuration */
+	0x20, 0x00, /*  u16 wTotalLength; */
+	0x01,       /*  u8  bNumInterfaces; (1) */
+	0x01,       /*  u8  bConfigurationValue; */
+	0x00,       /*  u8  iConfiguration; */
+	0xc0,       /*  u8  bmAttributes; 
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  u8  MaxPower; */
+      
+	/* one interface */
+	0x09,       /*  u8  if_bLength; */
+	0x04,       /*  u8  if_bDescriptorType; Interface */
+	0x00,       /*  u8  if_bInterfaceNumber; */
+	0x00,       /*  u8  if_bAlternateSetting; */
+	0x02,       /*  u8  if_bNumEndpoints; */
+	0x08,       /*  u8  if_bInterfaceClass; MASS STORAGE */
+	0x06,       /*  u8  if_bInterfaceSubClass; SCSI */
+	0x50,       /*  u8  if_bInterfaceProtocol; Bulk Only */
+	0x00,       /*  u8  if_iInterface; */
+     
+	/* Bulk-In endpoint */
+	0x07,       /*  u8  ep_bLength; */
+	0x05,       /*  u8  ep_bDescriptorType; Endpoint */
+	0x81,       /*  u8  ep_bEndpointAddress; IN Endpoint 1 */
+ 	0x02,       /*  u8  ep_bmAttributes; Bulk */
+ 	0x40, 0x00, /*  u16 ep_wMaxPacketSize; */
+	0x00,       /*  u8  ep_bInterval; */
+
+	/* Bulk-Out endpoint */
+	0x07,       /*  u8  ep_bLength; */
+	0x05,       /*  u8  ep_bDescriptorType; Endpoint */
+	0x02,       /*  u8  ep_bEndpointAddress; OUT Endpoint 2 */
+ 	0x02,       /*  u8  ep_bmAttributes; Bulk */
+ 	0x40, 0x00, /*  u16 ep_wMaxPacketSize; */
+	0x00        /*  u8  ep_bInterval; */
+};
+
+static void usb_msd_command_complete(void *opaque, uint32_t tag, int fail)
+{
+    MSDState *s = (MSDState *)opaque;
+
+    DPRINTF("Command complete\n");
+    s->result = fail;
+    s->mode = USB_MSDM_CSW;
+}
+
+static void usb_msd_handle_reset(USBDevice *dev, int destroy)
+{
+    MSDState *s = (MSDState *)dev;
+
+    DPRINTF("Reset\n");
+    s->mode = USB_MSDM_CBW;
+    if (destroy) {
+        scsi_disk_destroy(s->scsi_dev);
+        qemu_free(s);
+    }
+}
+
+static int usb_msd_handle_control(USBDevice *dev, int request, int value,
+                                  int index, int length, uint8_t *data)
+{
+    MSDState *s = (MSDState *)dev;
+    int ret = 0;
+
+    switch (request) {
+    case DeviceRequest | USB_REQ_GET_STATUS:
+        data[0] = (1 << USB_DEVICE_SELF_POWERED) |
+            (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
+        data[1] = 0x00;
+        ret = 2;
+        break;
+    case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+        if (value == USB_DEVICE_REMOTE_WAKEUP) {
+            dev->remote_wakeup = 0;
+        } else {
+            goto fail;
+        }
+        ret = 0;
+        break;
+    case DeviceOutRequest | USB_REQ_SET_FEATURE:
+        if (value == USB_DEVICE_REMOTE_WAKEUP) {
+            dev->remote_wakeup = 1;
+        } else {
+            goto fail;
+        }
+        ret = 0;
+        break;
+    case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+        dev->addr = value;
+        ret = 0;
+        break;
+    case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+        switch(value >> 8) {
+        case USB_DT_DEVICE:
+            memcpy(data, qemu_msd_dev_descriptor, 
+                   sizeof(qemu_msd_dev_descriptor));
+            ret = sizeof(qemu_msd_dev_descriptor);
+            break;
+        case USB_DT_CONFIG:
+            memcpy(data, qemu_msd_config_descriptor, 
+                   sizeof(qemu_msd_config_descriptor));
+            ret = sizeof(qemu_msd_config_descriptor);
+            break;
+        case USB_DT_STRING:
+            switch(value & 0xff) {
+            case 0:
+                /* language ids */
+                data[0] = 4;
+                data[1] = 3;
+                data[2] = 0x09;
+                data[3] = 0x04;
+                ret = 4;
+                break;
+            case 1:
+                /* vendor description */
+                ret = set_usb_string(data, "QEMU " QEMU_VERSION);
+                break;
+            case 2:
+                /* product description */
+                ret = set_usb_string(data, "QEMU USB HARDDRIVE");
+                break;
+            case 3:
+                /* serial number */
+                ret = set_usb_string(data, "1");
+                break;
+            default:
+                goto fail;
+            }
+            break;
+        default:
+            goto fail;
+        }
+        break;
+    case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+        data[0] = 1;
+        ret = 1;
+        break;
+    case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+        ret = 0;
+        break;
+    case DeviceRequest | USB_REQ_GET_INTERFACE:
+        data[0] = 0;
+        ret = 1;
+        break;
+    case DeviceOutRequest | USB_REQ_SET_INTERFACE:
+        ret = 0;
+        break;
+    case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+        if (value == 0 && index != 0x81) { /* clear ep halt */
+            goto fail;
+        }
+        ret = 0;
+        break;
+        /* Class specific requests.  */
+    case MassStorageReset:
+        /* Reset state ready for the next CBW.  */
+        s->mode = USB_MSDM_CBW;
+        ret = 0;
+        break;
+    case GetMaxLun:
+        data[0] = 0;
+        ret = 1;
+        break;
+    default:
+    fail:
+        ret = USB_RET_STALL;
+        break;
+    }
+    return ret;
+}
+
+struct usb_msd_cbw {
+    uint32_t sig;
+    uint32_t tag;
+    uint32_t data_len;
+    uint8_t flags;
+    uint8_t lun;
+    uint8_t cmd_len;
+    uint8_t cmd[16];
+};
+
+struct usb_msd_csw {
+    uint32_t sig;
+    uint32_t tag;
+    uint32_t residue;
+    uint8_t status;
+};
+
+static int usb_msd_handle_data(USBDevice *dev, int pid, uint8_t devep,
+                               uint8_t *data, int len)
+{
+    MSDState *s = (MSDState *)dev;
+    int ret = 0;
+    struct usb_msd_cbw cbw;
+    struct usb_msd_csw csw;
+
+    switch (pid) {
+    case USB_TOKEN_OUT:
+        if (devep != 2)
+            goto fail;
+
+        switch (s->mode) {
+        case USB_MSDM_CBW:
+            if (len != 31) {
+                fprintf(stderr, "usb-msd: Bad CBW size");
+                goto fail;
+            }
+            memcpy(&cbw, data, 31);
+            if (le32_to_cpu(cbw.sig) != 0x43425355) {
+                fprintf(stderr, "usb-msd: Bad signature %08x\n",
+                        le32_to_cpu(cbw.sig));
+                goto fail;
+            }
+            DPRINTF("Command on LUN %d\n", cbw.lun);
+            if (cbw.lun != 0) {
+                fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
+                goto fail;
+            }
+            s->tag = le32_to_cpu(cbw.tag);
+            s->data_len = le32_to_cpu(cbw.data_len);
+            if (s->data_len == 0) {
+                s->mode = USB_MSDM_CSW;
+            } else if (cbw.flags & 0x80) {
+                s->mode = USB_MSDM_DATAIN;
+            } else {
+                s->mode = USB_MSDM_DATAOUT;
+            }
+            DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
+                    s->tag, cbw.flags, cbw.cmd_len, s->data_len);
+            scsi_send_command(s->scsi_dev, s->tag, cbw.cmd);
+            ret = len;
+            break;
+
+        case USB_MSDM_DATAOUT:
+            DPRINTF("Data out %d/%d\n", len, s->data_len);
+            if (len > s->data_len)
+                goto fail;
+
+            if (scsi_write_data(s->scsi_dev, data, len))
+                goto fail;
+
+            s->data_len -= len;
+            if (s->data_len == 0)
+                s->mode = USB_MSDM_CSW;
+            ret = len;
+            break;
+
+        default:
+            DPRINTF("Unexpected write (len %d)\n", len);
+            goto fail;
+        }
+        break;
+
+    case USB_TOKEN_IN:
+        if (devep != 1)
+            goto fail;
+
+        switch (s->mode) {
+        case USB_MSDM_CSW:
+            DPRINTF("Command status %d tag 0x%x, len %d\n",
+                    s->result, s->tag, len);
+            if (len < 13)
+                goto fail;
+
+            csw.sig = cpu_to_le32(0x53425355);
+            csw.tag = cpu_to_le32(s->tag);
+            csw.residue = 0;
+            csw.status = s->result;
+            memcpy(data, &csw, 13);
+            ret = 13;
+            s->mode = USB_MSDM_CBW;
+            break;
+
+        case USB_MSDM_DATAIN:
+            DPRINTF("Data in %d/%d\n", len, s->data_len);
+            if (len > s->data_len)
+                len = s->data_len;
+
+            if (scsi_read_data(s->scsi_dev, data, len))
+                goto fail;
+
+            s->data_len -= len;
+            if (s->data_len == 0)
+                s->mode = USB_MSDM_CSW;
+            ret = len;
+            break;
+
+        default:
+            DPRINTF("Unexpected read (len %d)\n", len);
+            goto fail;
+        }
+        break;
+
+    default:
+        DPRINTF("Bad token\n");
+    fail:
+        ret = USB_RET_STALL;
+        break;
+    }
+
+    return ret;
+}
+
+
+USBDevice *usb_msd_init(const char *filename)
+{
+    MSDState *s;
+    BlockDriverState *bdrv;
+
+    s = qemu_mallocz(sizeof(MSDState));
+    if (!s)
+        return NULL;
+
+    bdrv = bdrv_new("usb");
+    bdrv_open(bdrv, filename, 0);
+
+    s->dev.speed = USB_SPEED_FULL;
+    s->dev.handle_packet = usb_generic_handle_packet;
+
+    s->dev.handle_reset = usb_msd_handle_reset;
+    s->dev.handle_control = usb_msd_handle_control;
+    s->dev.handle_data = usb_msd_handle_data;
+
+    s->scsi_dev = scsi_disk_init(bdrv, usb_msd_command_complete, s);
+    usb_msd_handle_reset((USBDevice *)s, 0);
+    return (USBDevice *)s;
+}