usb-host: remove 'remote wakeup' flag from configuration descriptor

If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.

Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 20 insertions, 0 deletions

diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index fcf48c0193..00e0e36369 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -88,6 +88,7 @@ struct USBHostDevice {
     bool                             needs_autoscan;
     bool                             allow_one_guest_reset;
     bool                             allow_all_guest_resets;
+    bool                             suppress_remote_wake;
 
     /* state */
     QTAILQ_ENTRY(USBHostDevice)      next;
@@ -386,6 +387,8 @@ static void LIBUSB_CALL usb_host_req_complete_ctrl(struct libusb_transfer *xfer)
     r->p->status = status_map[xfer->status];
     r->p->actual_length = xfer->actual_length;
     if (r->in && xfer->actual_length) {
+        USBDevice *udev = USB_DEVICE(s);
+        struct libusb_config_descriptor *conf = (void *)r->cbuf;
         memcpy(r->cbuf, r->buffer + 8, xfer->actual_length);
 
         /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices
@@ -394,6 +397,21 @@ static void LIBUSB_CALL usb_host_req_complete_ctrl(struct libusb_transfer *xfer)
             r->cbuf[7] == 9) {
             r->cbuf[7] = 64;
         }
+        /*
+         *If this is GET_DESCRIPTOR request for configuration descriptor,
+         * remove 'remote wakeup' flag from it to prevent idle power down
+         * in Windows guest
+         */
+        if (s->suppress_remote_wake &&
+            udev->setup_buf[0] == USB_DIR_IN &&
+            udev->setup_buf[1] == USB_REQ_GET_DESCRIPTOR &&
+            udev->setup_buf[3] == USB_DT_CONFIG && udev->setup_buf[2] == 0 &&
+            xfer->actual_length >
+                offsetof(struct libusb_config_descriptor, bmAttributes) &&
+            (conf->bmAttributes & USB_CFG_ATT_WAKEUP)) {
+                trace_usb_host_remote_wakeup_removed(s->bus_num, s->addr);
+                conf->bmAttributes &= ~USB_CFG_ATT_WAKEUP;
+        }
     }
     trace_usb_host_req_complete(s->bus_num, s->addr, r->p,
                                 r->p->status, r->p->actual_length);
@@ -1596,6 +1614,8 @@ static Property usb_host_dev_properties[] = {
                        LIBUSB_LOG_LEVEL_WARNING),
     DEFINE_PROP_BIT("pipeline",    USBHostDevice, options,
                     USB_HOST_OPT_PIPELINE, true),
+    DEFINE_PROP_BOOL("suppress-remote-wake", USBHostDevice,
+                     suppress_remote_wake, true),
     DEFINE_PROP_END_OF_LIST(),
 };