Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228-1' into staging

target-arm queue:
 * raspi2: add gpio controller and sdhost controller, with
   the wiring so the guest can switch which controller the
   SD card is attached to
   (this is sufficient to get raspbian kernels to boot)
 * GICv3: support state save/restore from KVM
 * update Linux headers to 4.11
 * refactor and QOMify the ARMv7M container object

# gpg: Signature made Tue 28 Feb 2017 17:11:49 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170228-1: (21 commits)
  bcm2835: add sdhost and gpio controllers
  bcm2835_gpio: add bcm2835 gpio controller
  hw/sd: add card-reparenting function
  qdev: Have qdev_set_parent_bus() handle devices already on a bus
  hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers
  target-arm: Add GICv3CPUState in CPUARMState struct
  hw/intc/arm_gicv3_kvm: Implement get/put functions
  hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate
  update Linux headers to 4.11
  update-linux-headers: update for 4.11
  stm32f205: Rename 'nvic' local to 'armv7m'
  stm32f205: Create armv7m object without using armv7m_init()
  armv7m: Split systick out from NVIC
  armv7m: Don't put core v7M devices under CONFIG_STELLARIS
  armv7m: Make bitband device take the address space to access
  armv7m: Make NVIC expose a memory region rather than mapping itself
  armv7m: Make ARMv7M object take memory region link
  armv7m: Use QOMified armv7m object in armv7m_init()
  armv7m: QOMify the armv7m container
  armv7m: Move NVICState struct definition into header
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

3 files changed, 27 insertions, 1 deletions

diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h
index 5c10f7e25d..c8b3338375 100644
--- a/include/standard-headers/linux/input-event-codes.h
+++ b/include/standard-headers/linux/input-event-codes.h
@@ -640,7 +640,7 @@
  * Control a data application associated with the currently viewed channel,
  * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
  */
-#define KEY_DATA			0x275
+#define KEY_DATA			0x277
 
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index e5a2e68b22..634c9c44ed 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -23,6 +23,14 @@
 #define LINUX_PCI_REGS_H
 
 /*
+ * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of
+ * configuration space.  PCI-X Mode 2 and PCIe devices have 4096 bytes of
+ * configuration space.
+ */
+#define PCI_CFG_SPACE_SIZE	256
+#define PCI_CFG_SPACE_EXP_SIZE	4096
+
+/*
  * Under PCI, each device has 256 bytes of configuration address space,
  * of which the first 64 bytes are standardized as follows:
  */
@@ -674,6 +682,7 @@
 #define PCI_EXT_CAP_ID_PMUX	0x1A	/* Protocol Multiplexing */
 #define PCI_EXT_CAP_ID_PASID	0x1B	/* Process Address Space ID */
 #define PCI_EXT_CAP_ID_DPC	0x1D	/* Downstream Port Containment */
+#define PCI_EXT_CAP_ID_L1SS	0x1E	/* L1 PM Substates */
 #define PCI_EXT_CAP_ID_PTM	0x1F	/* Precision Time Measurement */
 #define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PTM
 
@@ -965,6 +974,7 @@
 #define PCI_EXP_DPC_STATUS		8	/* DPC Status */
 #define  PCI_EXP_DPC_STATUS_TRIGGER	0x01	/* Trigger Status */
 #define  PCI_EXP_DPC_STATUS_INTERRUPT	0x08	/* Interrupt Status */
+#define  PCI_EXP_DPC_RP_BUSY		0x10	/* Root Port Busy */
 
 #define PCI_EXP_DPC_SOURCE_ID		10	/* DPC Source Identifier */
 
@@ -977,4 +987,19 @@
 #define  PCI_PTM_CTRL_ENABLE		0x00000001  /* PTM enable */
 #define  PCI_PTM_CTRL_ROOT		0x00000002  /* Root select */
 
+/* L1 PM Substates */
+#define PCI_L1SS_CAP		    4	/* capability register */
+#define  PCI_L1SS_CAP_PCIPM_L1_2	 1	/* PCI PM L1.2 Support */
+#define  PCI_L1SS_CAP_PCIPM_L1_1	 2	/* PCI PM L1.1 Support */
+#define  PCI_L1SS_CAP_ASPM_L1_2		 4	/* ASPM L1.2 Support */
+#define  PCI_L1SS_CAP_ASPM_L1_1		 8	/* ASPM L1.1 Support */
+#define  PCI_L1SS_CAP_L1_PM_SS		16	/* L1 PM Substates Support */
+#define PCI_L1SS_CTL1		    8	/* Control Register 1 */
+#define  PCI_L1SS_CTL1_PCIPM_L1_2	1	/* PCI PM L1.2 Enable */
+#define  PCI_L1SS_CTL1_PCIPM_L1_1	2	/* PCI PM L1.1 Support */
+#define  PCI_L1SS_CTL1_ASPM_L1_2	4	/* ASPM L1.2 Support */
+#define  PCI_L1SS_CTL1_ASPM_L1_1	8	/* ASPM L1.1 Support */
+#define  PCI_L1SS_CTL1_L1SS_MASK	0x0000000F
+#define PCI_L1SS_CTL2		    0xC	/* Control Register 2 */
+
 #endif /* LINUX_PCI_REGS_H */
diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
index fe74e422d4..6d5c3b2d4f 100644
--- a/include/standard-headers/linux/virtio_ids.h
+++ b/include/standard-headers/linux/virtio_ids.h
@@ -43,4 +43,5 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+
 #endif /* _LINUX_VIRTIO_IDS_H */