linux-headers: Update to Linux v6.6-rc1

This update contains the required header changes for the
"target/s390x: AP-passthrough for PV guests" patch from
Steffen Eiden.

Message-ID: <20230912093432.180041-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

1 files changed, 149 insertions, 1 deletions

diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index 16db89071e..acf72b4999 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -217,6 +217,7 @@ struct vfio_device_info {
 	__u32	num_regions;	/* Max region index + 1 */
 	__u32	num_irqs;	/* Max IRQ index + 1 */
 	__u32   cap_offset;	/* Offset within info struct of first cap */
+	__u32   pad;
 };
 #define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
 
@@ -677,11 +678,60 @@ enum {
  * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
  *					      struct vfio_pci_hot_reset_info)
  *
+ * This command is used to query the affected devices in the hot reset for
+ * a given device.
+ *
+ * This command always reports the segment, bus, and devfn information for
+ * each affected device, and selectively reports the group_id or devid per
+ * the way how the calling device is opened.
+ *
+ *	- If the calling device is opened via the traditional group/container
+ *	  API, group_id is reported.  User should check if it has owned all
+ *	  the affected devices and provides a set of group fds to prove the
+ *	  ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl.
+ *
+ *	- If the calling device is opened as a cdev, devid is reported.
+ *	  Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this
+ *	  data type.  All the affected devices should be represented in
+ *	  the dev_set, ex. bound to a vfio driver, and also be owned by
+ *	  this interface which is determined by the following conditions:
+ *	  1) Has a valid devid within the iommufd_ctx of the calling device.
+ *	     Ownership cannot be determined across separate iommufd_ctx and
+ *	     the cdev calling conventions do not support a proof-of-ownership
+ *	     model as provided in the legacy group interface.  In this case
+ *	     valid devid with value greater than zero is provided in the return
+ *	     structure.
+ *	  2) Does not have a valid devid within the iommufd_ctx of the calling
+ *	     device, but belongs to the same IOMMU group as the calling device
+ *	     or another opened device that has a valid devid within the
+ *	     iommufd_ctx of the calling device.  This provides implicit ownership
+ *	     for devices within the same DMA isolation context.  In this case
+ *	     the devid value of VFIO_PCI_DEVID_OWNED is provided in the return
+ *	     structure.
+ *
+ *	  A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return
+ *	  structure for affected devices where device is NOT represented in the
+ *	  dev_set or ownership is not available.  Such devices prevent the use
+ *	  of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership
+ *	  calling conventions (ie. via legacy group accessed devices).  Flag
+ *	  VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the
+ *	  affected devices are represented in the dev_set and also owned by
+ *	  the user.  This flag is available only when
+ *	  flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved.
+ *	  When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero
+ *	  length fd array on the calling device as the ownership is validated
+ *	  by iommufd_ctx.
+ *
  * Return: 0 on success, -errno on failure:
  *	-enospc = insufficient buffer, -enodev = unsupported for device.
  */
 struct vfio_pci_dependent_device {
-	__u32	group_id;
+	union {
+		__u32   group_id;
+		__u32	devid;
+#define VFIO_PCI_DEVID_OWNED		0
+#define VFIO_PCI_DEVID_NOT_OWNED	-1
+	};
 	__u16	segment;
 	__u8	bus;
 	__u8	devfn; /* Use PCI_SLOT/PCI_FUNC */
@@ -690,6 +740,8 @@ struct vfio_pci_dependent_device {
 struct vfio_pci_hot_reset_info {
 	__u32	argsz;
 	__u32	flags;
+#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID		(1 << 0)
+#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED	(1 << 1)
 	__u32	count;
 	struct vfio_pci_dependent_device	devices[];
 };
@@ -700,6 +752,24 @@ struct vfio_pci_hot_reset_info {
  * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
  *				    struct vfio_pci_hot_reset)
  *
+ * A PCI hot reset results in either a bus or slot reset which may affect
+ * other devices sharing the bus/slot.  The calling user must have
+ * ownership of the full set of affected devices as determined by the
+ * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl.
+ *
+ * When called on a device file descriptor acquired through the vfio
+ * group interface, the user is required to provide proof of ownership
+ * of those affected devices via the group_fds array in struct
+ * vfio_pci_hot_reset.
+ *
+ * When called on a direct cdev opened vfio device, the flags field of
+ * struct vfio_pci_hot_reset_info reports the ownership status of the
+ * affected devices and this ioctl must be called with an empty group_fds
+ * array.  See above INFO ioctl definition for ownership requirements.
+ *
+ * Mixed usage of legacy groups and cdevs across the set of affected
+ * devices is not supported.
+ *
  * Return: 0 on success, -errno on failure.
  */
 struct vfio_pci_hot_reset {
@@ -829,6 +899,83 @@ struct vfio_device_feature {
 #define VFIO_DEVICE_FEATURE		_IO(VFIO_TYPE, VFIO_BASE + 17)
 
 /*
+ * VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18,
+ *				   struct vfio_device_bind_iommufd)
+ * @argsz:	 User filled size of this data.
+ * @flags:	 Must be 0.
+ * @iommufd:	 iommufd to bind.
+ * @out_devid:	 The device id generated by this bind. devid is a handle for
+ *		 this device/iommufd bond and can be used in IOMMUFD commands.
+ *
+ * Bind a vfio_device to the specified iommufd.
+ *
+ * User is restricted from accessing the device before the binding operation
+ * is completed.  Only allowed on cdev fds.
+ *
+ * Unbind is automatically conducted when device fd is closed.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_bind_iommufd {
+	__u32		argsz;
+	__u32		flags;
+	__s32		iommufd;
+	__u32		out_devid;
+};
+
+#define VFIO_DEVICE_BIND_IOMMUFD	_IO(VFIO_TYPE, VFIO_BASE + 18)
+
+/*
+ * VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19,
+ *					struct vfio_device_attach_iommufd_pt)
+ * @argsz:	User filled size of this data.
+ * @flags:	Must be 0.
+ * @pt_id:	Input the target id which can represent an ioas or a hwpt
+ *		allocated via iommufd subsystem.
+ *		Output the input ioas id or the attached hwpt id which could
+ *		be the specified hwpt itself or a hwpt automatically created
+ *		for the specified ioas by kernel during the attachment.
+ *
+ * Associate the device with an address space within the bound iommufd.
+ * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close.  This is only
+ * allowed on cdev fds.
+ *
+ * If a vfio device is currently attached to a valid hw_pagetable, without doing
+ * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl
+ * passing in another hw_pagetable (hwpt) id is allowed. This action, also known
+ * as a hw_pagetable replacement, will replace the device's currently attached
+ * hw_pagetable with a new hw_pagetable corresponding to the given pt_id.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_attach_iommufd_pt {
+	__u32	argsz;
+	__u32	flags;
+	__u32	pt_id;
+};
+
+#define VFIO_DEVICE_ATTACH_IOMMUFD_PT		_IO(VFIO_TYPE, VFIO_BASE + 19)
+
+/*
+ * VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20,
+ *					struct vfio_device_detach_iommufd_pt)
+ * @argsz:	User filled size of this data.
+ * @flags:	Must be 0.
+ *
+ * Remove the association of the device and its current associated address
+ * space.  After it, the device should be in a blocking DMA state.  This is only
+ * allowed on cdev fds.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_detach_iommufd_pt {
+	__u32	argsz;
+	__u32	flags;
+};
+
+#define VFIO_DEVICE_DETACH_IOMMUFD_PT		_IO(VFIO_TYPE, VFIO_BASE + 20)
+
+/*
  * Provide support for setting a PCI VF Token, which is used as a shared
  * secret between PF and VF drivers.  This feature may only be set on a
  * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
@@ -1304,6 +1451,7 @@ struct vfio_iommu_type1_info {
 #define VFIO_IOMMU_INFO_CAPS	(1 << 1)	/* Info supports caps */
 	__u64	iova_pgsizes;	/* Bitmap of supported page sizes */
 	__u32   cap_offset;	/* Offset within info struct of first cap */
+	__u32   pad;
 };
 
 /*