diff options
| -rw-r--r-- | hw/char/escc.c | 30 | ||||
| -rw-r--r-- | include/hw/char/escc.h | 1 |
2 files changed, 25 insertions, 6 deletions
diff --git a/hw/char/escc.c b/hw/char/escc.c index e185522e27..8f7bf322cb 100644 --- a/hw/char/escc.c +++ b/hw/char/escc.c @@ -45,14 +45,21 @@ * mouse and keyboard ports don't implement all functions and they are * only asynchronous. There is no DMA. * - * Z85C30 is also used on PowerMacs. There are some small differences - * between Sparc version (sunzilog) and PowerMac (pmac): + * Z85C30 is also used on PowerMacs and m68k Macs. + * + * There are some small differences between Sparc version (sunzilog) + * and PowerMac (pmac): * Offset between control and data registers * There is some kind of lockup bug, but we can ignore it * CTS is inverted * DMA on pmac using DBDMA chip * pmac can do IRDA and faster rates, sunzilog can only do 38400 * pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz + * + * Linux driver for m68k Macs is the same as for PowerMac (pmac_zilog), + * but registers are grouped by type and not by channel: + * channel is selected by bit 0 of the address (instead of bit 1) + * and register is selected by bit 1 of the address (instead of bit 0). */ /* @@ -172,6 +179,16 @@ static void handle_kbd_command(ESCCChannelState *s, int val); static int serial_can_receive(void *opaque); static void serial_receive_byte(ESCCChannelState *s, int ch); +static int reg_shift(ESCCState *s) +{ + return s->bit_swap ? s->it_shift + 1 : s->it_shift; +} + +static int chn_shift(ESCCState *s) +{ + return s->bit_swap ? s->it_shift : s->it_shift + 1; +} + static void clear_queue(void *opaque) { ESCCChannelState *s = opaque; @@ -436,8 +453,8 @@ static void escc_mem_write(void *opaque, hwaddr addr, int newreg, channel; val &= 0xff; - saddr = (addr >> serial->it_shift) & 1; - channel = (addr >> (serial->it_shift + 1)) & 1; + saddr = (addr >> reg_shift(serial)) & 1; + channel = (addr >> chn_shift(serial)) & 1; s = &serial->chn[channel]; switch (saddr) { case SERIAL_CTRL: @@ -547,8 +564,8 @@ static uint64_t escc_mem_read(void *opaque, hwaddr addr, uint32_t ret; int channel; - saddr = (addr >> serial->it_shift) & 1; - channel = (addr >> (serial->it_shift + 1)) & 1; + saddr = (addr >> reg_shift(serial)) & 1; + channel = (addr >> chn_shift(serial)) & 1; s = &serial->chn[channel]; switch (saddr) { case SERIAL_CTRL: @@ -832,6 +849,7 @@ static void escc_realize(DeviceState *dev, Error **errp) static Property escc_properties[] = { DEFINE_PROP_UINT32("frequency", ESCCState, frequency, 0), DEFINE_PROP_UINT32("it_shift", ESCCState, it_shift, 0), + DEFINE_PROP_BOOL("bit_swap", ESCCState, bit_swap, false), DEFINE_PROP_UINT32("disabled", ESCCState, disabled, 0), DEFINE_PROP_UINT32("chnBtype", ESCCState, chn[0].type, 0), DEFINE_PROP_UINT32("chnAtype", ESCCState, chn[1].type, 0), diff --git a/include/hw/char/escc.h b/include/hw/char/escc.h index d5196c53e6..794b653484 100644 --- a/include/hw/char/escc.h +++ b/include/hw/char/escc.h @@ -51,6 +51,7 @@ typedef struct ESCCState { struct ESCCChannelState chn[2]; uint32_t it_shift; + bool bit_swap; MemoryRegion mmio; uint32_t disabled; uint32_t frequency; |