diff options
| -rw-r--r-- | hw/ppc/meson.build | 1 | ||||
| -rw-r--r-- | hw/ppc/pnv_nest_pervasive.c | 208 | ||||
| -rw-r--r-- | include/hw/ppc/pnv_nest_pervasive.h | 32 | ||||
| -rw-r--r-- | include/hw/ppc/pnv_xscom.h | 3 |
4 files changed, 244 insertions, 0 deletions
diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build index 15d13e649d..960ff52dfe 100644 --- a/hw/ppc/meson.build +++ b/hw/ppc/meson.build @@ -53,6 +53,7 @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files( 'pnv_bmc.c', 'pnv_homer.c', 'pnv_pnor.c', + 'pnv_nest_pervasive.c', )) # PowerPC 4xx boards ppc_ss.add(when: 'CONFIG_PPC405', if_true: files( diff --git a/hw/ppc/pnv_nest_pervasive.c b/hw/ppc/pnv_nest_pervasive.c new file mode 100644 index 0000000000..77476753a4 --- /dev/null +++ b/hw/ppc/pnv_nest_pervasive.c @@ -0,0 +1,208 @@ +/* + * QEMU PowerPC nest pervasive common chiplet model + * + * Copyright (c) 2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/qdev-properties.h" +#include "hw/ppc/pnv.h" +#include "hw/ppc/pnv_xscom.h" +#include "hw/ppc/pnv_nest_pervasive.h" + +/* + * Status, configuration, and control units in POWER chips is provided + * by the pervasive subsystem, which connects registers to the SCOM bus, + * which can be programmed by processor cores, other units on the chip, + * BMCs, or other POWER chips. + * + * A POWER10 chip is divided into logical units called chiplets. Chiplets + * are broadly divided into "core chiplets" (with the processor cores) and + * "nest chiplets" (with everything else). Each chiplet has an attachment + * to the pervasive bus (PIB) and with chiplet-specific registers. + * All nest chiplets have a common basic set of registers. + * + * This model will provide the registers functionality for common registers of + * nest unit (PB Chiplet, PCI Chiplets, MC Chiplet, PAU Chiplets) + * + * Currently this model provide the read/write functionality of chiplet control + * scom registers. + */ + +#define CPLT_CONF0 0x08 +#define CPLT_CONF0_OR 0x18 +#define CPLT_CONF0_CLEAR 0x28 +#define CPLT_CONF1 0x09 +#define CPLT_CONF1_OR 0x19 +#define CPLT_CONF1_CLEAR 0x29 +#define CPLT_STAT0 0x100 +#define CPLT_MASK0 0x101 +#define CPLT_PROTECT_MODE 0x3FE +#define CPLT_ATOMIC_CLOCK 0x3FF + +static uint64_t pnv_chiplet_ctrl_read(void *opaque, hwaddr addr, unsigned size) +{ + PnvNestChipletPervasive *nest_pervasive = PNV_NEST_CHIPLET_PERVASIVE( + opaque); + uint32_t reg = addr >> 3; + uint64_t val = ~0ull; + + /* CPLT_CTRL0 to CPLT_CTRL5 */ + for (int i = 0; i < PNV_CPLT_CTRL_SIZE; i++) { + if (reg == i) { + return nest_pervasive->control_regs.cplt_ctrl[i]; + } else if ((reg == (i + 0x10)) || (reg == (i + 0x20))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Write only register, ignoring " + "xscom read at 0x%" PRIx32 "\n", + __func__, reg); + return val; + } + } + + switch (reg) { + case CPLT_CONF0: + val = nest_pervasive->control_regs.cplt_cfg0; + break; + case CPLT_CONF0_OR: + case CPLT_CONF0_CLEAR: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Write only register, ignoring " + "xscom read at 0x%" PRIx32 "\n", + __func__, reg); + break; + case CPLT_CONF1: + val = nest_pervasive->control_regs.cplt_cfg1; + break; + case CPLT_CONF1_OR: + case CPLT_CONF1_CLEAR: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Write only register, ignoring " + "xscom read at 0x%" PRIx32 "\n", + __func__, reg); + break; + case CPLT_STAT0: + val = nest_pervasive->control_regs.cplt_stat0; + break; + case CPLT_MASK0: + val = nest_pervasive->control_regs.cplt_mask0; + break; + case CPLT_PROTECT_MODE: + val = nest_pervasive->control_regs.ctrl_protect_mode; + break; + case CPLT_ATOMIC_CLOCK: + val = nest_pervasive->control_regs.ctrl_atomic_lock; + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Chiplet_control_regs: Invalid xscom " + "read at 0x%" PRIx32 "\n", __func__, reg); + } + return val; +} + +static void pnv_chiplet_ctrl_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + PnvNestChipletPervasive *nest_pervasive = PNV_NEST_CHIPLET_PERVASIVE( + opaque); + uint32_t reg = addr >> 3; + + /* CPLT_CTRL0 to CPLT_CTRL5 */ + for (int i = 0; i < PNV_CPLT_CTRL_SIZE; i++) { + if (reg == i) { + nest_pervasive->control_regs.cplt_ctrl[i] = val; + return; + } else if (reg == (i + 0x10)) { + nest_pervasive->control_regs.cplt_ctrl[i] |= val; + return; + } else if (reg == (i + 0x20)) { + nest_pervasive->control_regs.cplt_ctrl[i] &= ~val; + return; + } + } + + switch (reg) { + case CPLT_CONF0: + nest_pervasive->control_regs.cplt_cfg0 = val; + break; + case CPLT_CONF0_OR: + nest_pervasive->control_regs.cplt_cfg0 |= val; + break; + case CPLT_CONF0_CLEAR: + nest_pervasive->control_regs.cplt_cfg0 &= ~val; + break; + case CPLT_CONF1: + nest_pervasive->control_regs.cplt_cfg1 = val; + break; + case CPLT_CONF1_OR: + nest_pervasive->control_regs.cplt_cfg1 |= val; + break; + case CPLT_CONF1_CLEAR: + nest_pervasive->control_regs.cplt_cfg1 &= ~val; + break; + case CPLT_STAT0: + nest_pervasive->control_regs.cplt_stat0 = val; + break; + case CPLT_MASK0: + nest_pervasive->control_regs.cplt_mask0 = val; + break; + case CPLT_PROTECT_MODE: + nest_pervasive->control_regs.ctrl_protect_mode = val; + break; + case CPLT_ATOMIC_CLOCK: + nest_pervasive->control_regs.ctrl_atomic_lock = val; + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Chiplet_control_regs: Invalid xscom " + "write at 0x%" PRIx32 "\n", + __func__, reg); + } +} + +static const MemoryRegionOps pnv_nest_pervasive_control_xscom_ops = { + .read = pnv_chiplet_ctrl_read, + .write = pnv_chiplet_ctrl_write, + .valid.min_access_size = 8, + .valid.max_access_size = 8, + .impl.min_access_size = 8, + .impl.max_access_size = 8, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static void pnv_nest_pervasive_realize(DeviceState *dev, Error **errp) +{ + PnvNestChipletPervasive *nest_pervasive = PNV_NEST_CHIPLET_PERVASIVE(dev); + + /* Chiplet control scoms */ + pnv_xscom_region_init(&nest_pervasive->xscom_ctrl_regs_mr, + OBJECT(nest_pervasive), + &pnv_nest_pervasive_control_xscom_ops, + nest_pervasive, "pervasive-control", + PNV10_XSCOM_CHIPLET_CTRL_REGS_SIZE); +} + +static void pnv_nest_pervasive_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "PowerNV nest pervasive chiplet"; + dc->realize = pnv_nest_pervasive_realize; +} + +static const TypeInfo pnv_nest_pervasive_info = { + .name = TYPE_PNV_NEST_CHIPLET_PERVASIVE, + .parent = TYPE_DEVICE, + .instance_size = sizeof(PnvNestChipletPervasive), + .class_init = pnv_nest_pervasive_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_PNV_XSCOM_INTERFACE }, + { } + } +}; + +static void pnv_nest_pervasive_register_types(void) +{ + type_register_static(&pnv_nest_pervasive_info); +} + +type_init(pnv_nest_pervasive_register_types); diff --git a/include/hw/ppc/pnv_nest_pervasive.h b/include/hw/ppc/pnv_nest_pervasive.h new file mode 100644 index 0000000000..73cacf3823 --- /dev/null +++ b/include/hw/ppc/pnv_nest_pervasive.h @@ -0,0 +1,32 @@ +/* + * QEMU PowerPC nest pervasive common chiplet model + * + * Copyright (c) 2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef PPC_PNV_NEST_CHIPLET_PERVASIVE_H +#define PPC_PNV_NEST_CHIPLET_PERVASIVE_H + +#define TYPE_PNV_NEST_CHIPLET_PERVASIVE "pnv-nest-chiplet-pervasive" +#define PNV_NEST_CHIPLET_PERVASIVE(obj) OBJECT_CHECK(PnvNestChipletPervasive, (obj), TYPE_PNV_NEST_CHIPLET_PERVASIVE) + +typedef struct PnvPervasiveCtrlRegs { +#define PNV_CPLT_CTRL_SIZE 6 + uint64_t cplt_ctrl[PNV_CPLT_CTRL_SIZE]; + uint64_t cplt_cfg0; + uint64_t cplt_cfg1; + uint64_t cplt_stat0; + uint64_t cplt_mask0; + uint64_t ctrl_protect_mode; + uint64_t ctrl_atomic_lock; +} PnvPervasiveCtrlRegs; + +typedef struct PnvNestChipletPervasive { + DeviceState parent; + MemoryRegion xscom_ctrl_regs_mr; + PnvPervasiveCtrlRegs control_regs; +} PnvNestChipletPervasive; + +#endif /*PPC_PNV_NEST_CHIPLET_PERVASIVE_H */ diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h index f5becbab41..3e15706dec 100644 --- a/include/hw/ppc/pnv_xscom.h +++ b/include/hw/ppc/pnv_xscom.h @@ -170,6 +170,9 @@ struct PnvXScomInterfaceClass { #define PNV10_XSCOM_XIVE2_BASE 0x2010800 #define PNV10_XSCOM_XIVE2_SIZE 0x400 +#define PNV10_XSCOM_N1_CHIPLET_CTRL_REGS_BASE 0x3000000 +#define PNV10_XSCOM_CHIPLET_CTRL_REGS_SIZE 0x400 + #define PNV10_XSCOM_PEC_NEST_BASE 0x3011800 /* index goes downwards ... */ #define PNV10_XSCOM_PEC_NEST_SIZE 0x100 |