diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | default-configs/aarch64-softmmu.mak | 1 | ||||
| -rw-r--r-- | hw/arm/Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/arm/microbit.c | 2 | ||||
| -rw-r--r-- | hw/arm/nrf51_soc.c | 20 | ||||
| -rw-r--r-- | hw/arm/strongarm.c | 4 | ||||
| -rw-r--r-- | hw/arm/virt.c | 4 | ||||
| -rw-r--r-- | hw/arm/xilinx_zynq.c | 2 | ||||
| -rw-r--r-- | hw/arm/xlnx-versal-virt.c | 494 | ||||
| -rw-r--r-- | hw/arm/xlnx-versal.c | 323 | ||||
| -rw-r--r-- | hw/char/Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/char/nrf51_uart.c | 330 | ||||
| -rw-r--r-- | hw/char/trace-events | 4 | ||||
| -rw-r--r-- | include/hw/arm/nrf51_soc.h | 3 | ||||
| -rw-r--r-- | include/hw/arm/xlnx-versal.h | 122 | ||||
| -rw-r--r-- | include/hw/char/nrf51_uart.h | 78 | ||||
| -rw-r--r-- | target/arm/cpu.c | 15 | ||||
| -rw-r--r-- | target/arm/cpu.h | 5 | ||||
| -rw-r--r-- | tests/boot-serial-test.c | 19 |
19 files changed, 1423 insertions, 6 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 85f19f569f..98a1856afc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -627,7 +627,6 @@ F: hw/*/xlnx*.c F: include/hw/*/xlnx*.h ARM ACPI Subsystem -M: Shannon Zhao <zhaoshenglong@huawei.com> M: Shannon Zhao <shannon.zhaosl@gmail.com> L: qemu-arm@nongnu.org S: Maintained diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak index 6f790f061a..4ea9add003 100644 --- a/default-configs/aarch64-softmmu.mak +++ b/default-configs/aarch64-softmmu.mak @@ -8,4 +8,5 @@ CONFIG_DDC=y CONFIG_DPCD=y CONFIG_XLNX_ZYNQMP=y CONFIG_XLNX_ZYNQMP_ARM=y +CONFIG_XLNX_VERSAL=y CONFIG_ARM_SMMUV3=y diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index 5f88062c66..50c7b4a927 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -26,6 +26,7 @@ obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zynqmp.o xlnx-zcu102.o +obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o diff --git a/hw/arm/microbit.c b/hw/arm/microbit.c index e7d74116a5..a734e7f650 100644 --- a/hw/arm/microbit.c +++ b/hw/arm/microbit.c @@ -12,6 +12,7 @@ #include "qapi/error.h" #include "hw/boards.h" #include "hw/arm/arm.h" +#include "sysemu/sysemu.h" #include "exec/address-spaces.h" #include "hw/arm/nrf51_soc.h" @@ -35,6 +36,7 @@ static void microbit_init(MachineState *machine) sysbus_init_child_obj(OBJECT(machine), "nrf51", soc, sizeof(s->nrf51), TYPE_NRF51_SOC); + qdev_prop_set_chr(DEVICE(&s->nrf51), "serial0", serial_hd(0)); object_property_set_link(soc, OBJECT(system_memory), "memory", &error_fatal); object_property_set_bool(soc, true, "realized", &error_fatal); diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c index 1a59ef4552..b89c1bdea0 100644 --- a/hw/arm/nrf51_soc.c +++ b/hw/arm/nrf51_soc.c @@ -43,9 +43,12 @@ #define NRF51822_FLASH_SIZE (256 * 1024) #define NRF51822_SRAM_SIZE (16 * 1024) +#define BASE_TO_IRQ(base) ((base >> 12) & 0x1F) + static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) { NRF51State *s = NRF51_SOC(dev_soc); + MemoryRegion *mr; Error *err = NULL; if (!s->board_memory) { @@ -82,6 +85,18 @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(&s->container, SRAM_BASE, &s->sram); + /* UART */ + object_property_set_bool(OBJECT(&s->uart), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->uart), 0); + memory_region_add_subregion_overlap(&s->container, UART_BASE, mr, 0); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart), 0, + qdev_get_gpio_in(DEVICE(&s->cpu), + BASE_TO_IRQ(UART_BASE))); + create_unimplemented_device("nrf51_soc.io", IOMEM_BASE, IOMEM_SIZE); create_unimplemented_device("nrf51_soc.ficr", FICR_BASE, FICR_SIZE); create_unimplemented_device("nrf51_soc.private", @@ -99,6 +114,11 @@ static void nrf51_soc_init(Object *obj) qdev_prop_set_string(DEVICE(&s->cpu), "cpu-type", ARM_CPU_TYPE_NAME("cortex-m0")); qdev_prop_set_uint32(DEVICE(&s->cpu), "num-irq", 32); + + sysbus_init_child_obj(obj, "uart", &s->uart, sizeof(s->uart), + TYPE_NRF51_UART); + object_property_add_alias(obj, "serial0", OBJECT(&s->uart), "chardev", + &error_abort); } static Property nrf51_soc_properties[] = { diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index ec2627374d..644a9c45b4 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -587,12 +587,12 @@ static void strongarm_gpio_write(void *opaque, hwaddr offset, switch (offset) { case GPDR: /* GPIO Pin-Direction registers */ - s->dir = value; + s->dir = value & 0x0fffffff; strongarm_gpio_handler_update(s); break; case GPSR: /* GPIO Pin-Output Set registers */ - s->olevel |= value; + s->olevel |= value & 0x0fffffff; strongarm_gpio_handler_update(s); break; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 9f677825f9..a2b8d8f7c2 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -1871,6 +1871,9 @@ static void virt_machine_3_1_options(MachineClass *mc) } DEFINE_VIRT_MACHINE_AS_LATEST(3, 1) +#define VIRT_COMPAT_3_0 \ + HW_COMPAT_3_0 + static void virt_3_0_instance_init(Object *obj) { virt_3_1_instance_init(obj); @@ -1879,6 +1882,7 @@ static void virt_3_0_instance_init(Object *obj) static void virt_machine_3_0_options(MachineClass *mc) { virt_machine_3_1_options(mc); + SET_MACHINE_COMPAT(mc, VIRT_COMPAT_3_0); } DEFINE_VIRT_MACHINE(3, 0) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index f1496d2927..57497b0c4d 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -294,7 +294,7 @@ static void zynq_init(MachineState *machine) busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0xF8003000); sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */ - for (n = 0; n < 8; ++n) { /* event irqs */ + for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */ sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]); } diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c new file mode 100644 index 0000000000..1e31a3f442 --- /dev/null +++ b/hw/arm/xlnx-versal-virt.c @@ -0,0 +1,494 @@ +/* + * Xilinx Versal Virtual board. + * + * Copyright (c) 2018 Xilinx Inc. + * Written by Edgar E. Iglesias + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include "sysemu/device_tree.h" +#include "exec/address-spaces.h" +#include "hw/boards.h" +#include "hw/sysbus.h" +#include "hw/arm/sysbus-fdt.h" +#include "hw/arm/fdt.h" +#include "cpu.h" +#include "hw/arm/xlnx-versal.h" + +#define TYPE_XLNX_VERSAL_VIRT_MACHINE MACHINE_TYPE_NAME("xlnx-versal-virt") +#define XLNX_VERSAL_VIRT_MACHINE(obj) \ + OBJECT_CHECK(VersalVirt, (obj), TYPE_XLNX_VERSAL_VIRT_MACHINE) + +typedef struct VersalVirt { + MachineState parent_obj; + + Versal soc; + MemoryRegion mr_ddr; + + void *fdt; + int fdt_size; + struct { + uint32_t gic; + uint32_t ethernet_phy[2]; + uint32_t clk_125Mhz; + uint32_t clk_25Mhz; + } phandle; + struct arm_boot_info binfo; + + struct { + bool secure; + } cfg; +} VersalVirt; + +static void fdt_create(VersalVirt *s) +{ + MachineClass *mc = MACHINE_GET_CLASS(s); + int i; + + s->fdt = create_device_tree(&s->fdt_size); + if (!s->fdt) { + error_report("create_device_tree() failed"); + exit(1); + } + + /* Allocate all phandles. */ + s->phandle.gic = qemu_fdt_alloc_phandle(s->fdt); + for (i = 0; i < ARRAY_SIZE(s->phandle.ethernet_phy); i++) { + s->phandle.ethernet_phy[i] = qemu_fdt_alloc_phandle(s->fdt); + } + s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt); + s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt); + + /* Create /chosen node for load_dtb. */ + qemu_fdt_add_subnode(s->fdt, "/chosen"); + + /* Header */ + qemu_fdt_setprop_cell(s->fdt, "/", "interrupt-parent", s->phandle.gic); + qemu_fdt_setprop_cell(s->fdt, "/", "#size-cells", 0x2); + qemu_fdt_setprop_cell(s->fdt, "/", "#address-cells", 0x2); + qemu_fdt_setprop_string(s->fdt, "/", "model", mc->desc); + qemu_fdt_setprop_string(s->fdt, "/", "compatible", "xlnx-versal-virt"); +} + +static void fdt_add_clk_node(VersalVirt *s, const char *name, + unsigned int freq_hz, uint32_t phandle) +{ + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop_cell(s->fdt, name, "phandle", phandle); + qemu_fdt_setprop_cell(s->fdt, name, "clock-frequency", freq_hz); + qemu_fdt_setprop_cell(s->fdt, name, "#clock-cells", 0x0); + qemu_fdt_setprop_string(s->fdt, name, "compatible", "fixed-clock"); + qemu_fdt_setprop(s->fdt, name, "u-boot,dm-pre-reloc", NULL, 0); +} + +static void fdt_add_cpu_nodes(VersalVirt *s, uint32_t psci_conduit) +{ + int i; + + qemu_fdt_add_subnode(s->fdt, "/cpus"); + qemu_fdt_setprop_cell(s->fdt, "/cpus", "#size-cells", 0x0); + qemu_fdt_setprop_cell(s->fdt, "/cpus", "#address-cells", 1); + + for (i = XLNX_VERSAL_NR_ACPUS - 1; i >= 0; i--) { + char *name = g_strdup_printf("/cpus/cpu@%d", i); + ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); + + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop_cell(s->fdt, name, "reg", armcpu->mp_affinity); + if (psci_conduit != QEMU_PSCI_CONDUIT_DISABLED) { + qemu_fdt_setprop_string(s->fdt, name, "enable-method", "psci"); + } + qemu_fdt_setprop_string(s->fdt, name, "device_type", "cpu"); + qemu_fdt_setprop_string(s->fdt, name, "compatible", + armcpu->dtb_compatible); + g_free(name); + } +} + +static void fdt_add_gic_nodes(VersalVirt *s) +{ + char *nodename; + + nodename = g_strdup_printf("/gic@%x", MM_GIC_APU_DIST_MAIN); + qemu_fdt_add_subnode(s->fdt, nodename); + qemu_fdt_setprop_cell(s->fdt, nodename, "phandle", s->phandle.gic); + qemu_fdt_setprop_cells(s->fdt, nodename, "interrupts", + GIC_FDT_IRQ_TYPE_PPI, VERSAL_GIC_MAINT_IRQ, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop(s->fdt, nodename, "interrupt-controller", NULL, 0); + qemu_fdt_setprop_sized_cells(s->fdt, nodename, "reg", + 2, MM_GIC_APU_DIST_MAIN, + 2, MM_GIC_APU_DIST_MAIN_SIZE, + 2, MM_GIC_APU_REDIST_0, + 2, MM_GIC_APU_REDIST_0_SIZE); + qemu_fdt_setprop_cell(s->fdt, nodename, "#interrupt-cells", 3); + qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "arm,gic-v3"); +} + +static void fdt_add_timer_nodes(VersalVirt *s) +{ + const char compat[] = "arm,armv8-timer"; + uint32_t irqflags = GIC_FDT_IRQ_FLAGS_LEVEL_HI; + + qemu_fdt_add_subnode(s->fdt, "/timer"); + qemu_fdt_setprop_cells(s->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, VERSAL_TIMER_S_EL1_IRQ, irqflags, + GIC_FDT_IRQ_TYPE_PPI, VERSAL_TIMER_NS_EL1_IRQ, irqflags, + GIC_FDT_IRQ_TYPE_PPI, VERSAL_TIMER_VIRT_IRQ, irqflags, + GIC_FDT_IRQ_TYPE_PPI, VERSAL_TIMER_NS_EL2_IRQ, irqflags); + qemu_fdt_setprop(s->fdt, "/timer", "compatible", + compat, sizeof(compat)); +} + +static void fdt_add_uart_nodes(VersalVirt *s) +{ + uint64_t addrs[] = { MM_UART1, MM_UART0 }; + unsigned int irqs[] = { VERSAL_UART1_IRQ_0, VERSAL_UART0_IRQ_0 }; + const char compat[] = "arm,pl011\0arm,sbsa-uart"; + const char clocknames[] = "uartclk\0apb_pclk"; + int i; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) { + char *name = g_strdup_printf("/uart@%" PRIx64, addrs[i]); + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop_cell(s->fdt, name, "current-speed", 115200); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_125Mhz, s->phandle.clk_125Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, irqs[i], + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addrs[i], 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", + compat, sizeof(compat)); + qemu_fdt_setprop(s->fdt, name, "u-boot,dm-pre-reloc", NULL, 0); + + if (addrs[i] == MM_UART0) { + /* Select UART0. */ + qemu_fdt_setprop_string(s->fdt, "/chosen", "stdout-path", name); + } + g_free(name); + } +} + +static void fdt_add_fixed_link_nodes(VersalVirt *s, char *gemname, + uint32_t phandle) +{ + char *name = g_strdup_printf("%s/fixed-link", gemname); + + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop_cell(s->fdt, name, "phandle", phandle); + qemu_fdt_setprop(s->fdt, name, "full-duplex", NULL, 0); + qemu_fdt_setprop_cell(s->fdt, name, "speed", 1000); + g_free(name); +} + +static void fdt_add_gem_nodes(VersalVirt *s) +{ + uint64_t addrs[] = { MM_GEM1, MM_GEM0 }; + unsigned int irqs[] = { VERSAL_GEM1_IRQ_0, VERSAL_GEM0_IRQ_0 }; + const char clocknames[] = "pclk\0hclk\0tx_clk\0rx_clk"; + const char compat_gem[] = "cdns,zynqmp-gem\0cdns,gem"; + int i; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) { + char *name = g_strdup_printf("/ethernet@%" PRIx64, addrs[i]); + qemu_fdt_add_subnode(s->fdt, name); + + fdt_add_fixed_link_nodes(s, name, s->phandle.ethernet_phy[i]); + qemu_fdt_setprop_string(s->fdt, name, "phy-mode", "rgmii-id"); + qemu_fdt_setprop_cell(s->fdt, name, "phy-handle", + s->phandle.ethernet_phy[i]); + qemu_fdt_setprop_cells(s->fdt, name, "clocks", + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz, + s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); + qemu_fdt_setprop(s->fdt, name, "clock-names", + clocknames, sizeof(clocknames)); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, irqs[i], + GIC_FDT_IRQ_FLAGS_LEVEL_HI, + GIC_FDT_IRQ_TYPE_SPI, irqs[i], + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, addrs[i], 2, 0x1000); + qemu_fdt_setprop(s->fdt, name, "compatible", + compat_gem, sizeof(compat_gem)); + qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 1); + qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 0); + g_free(name); + } +} + +static void fdt_nop_memory_nodes(void *fdt, Error **errp) +{ + Error *err = NULL; + char **node_path; + int n = 0; + + node_path = qemu_fdt_node_unit_path(fdt, "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + while (node_path[n]) { + if (g_str_has_prefix(node_path[n], "/memory")) { + qemu_fdt_nop_node(fdt, node_path[n]); + } + n++; + } + g_strfreev(node_path); +} + +static void fdt_add_memory_nodes(VersalVirt *s, void *fdt, uint64_t ram_size) +{ + /* Describes the various split DDR access regions. */ + static const struct { + uint64_t base; + uint64_t size; + } addr_ranges[] = { + { MM_TOP_DDR, MM_TOP_DDR_SIZE }, + { MM_TOP_DDR_2, MM_TOP_DDR_2_SIZE }, + { MM_TOP_DDR_3, MM_TOP_DDR_3_SIZE }, + { MM_TOP_DDR_4, MM_TOP_DDR_4_SIZE } + }; + uint64_t mem_reg_prop[8] = {0}; + uint64_t size = ram_size; + Error *err = NULL; + char *name; + int i; + + fdt_nop_memory_nodes(fdt, &err); + if (err) { + error_report_err(err); + return; + } + + name = g_strdup_printf("/memory@%x", MM_TOP_DDR); + for (i = 0; i < ARRAY_SIZE(addr_ranges) && size; i++) { + uint64_t mapsize; + + mapsize = size < addr_ranges[i].size ? size : addr_ranges[i].size; + + mem_reg_prop[i * 2] = addr_ranges[i].base; + mem_reg_prop[i * 2 + 1] = mapsize; + size -= mapsize; + } + qemu_fdt_add_subnode(fdt, name); + qemu_fdt_setprop_string(fdt, name, "device_type", "memory"); + + switch (i) { + case 1: + qemu_fdt_setprop_sized_cells(fdt, name, "reg", + 2, mem_reg_prop[0], + 2, mem_reg_prop[1]); + break; + case 2: + qemu_fdt_setprop_sized_cells(fdt, name, "reg", + 2, mem_reg_prop[0], + 2, mem_reg_prop[1], + 2, mem_reg_prop[2], + 2, mem_reg_prop[3]); + break; + case 3: + qemu_fdt_setprop_sized_cells(fdt, name, "reg", + 2, mem_reg_prop[0], + 2, mem_reg_prop[1], + 2, mem_reg_prop[2], + 2, mem_reg_prop[3], + 2, mem_reg_prop[4], + 2, mem_reg_prop[5]); + break; + case 4: + qemu_fdt_setprop_sized_cells(fdt, name, "reg", + 2, mem_reg_prop[0], + 2, mem_reg_prop[1], + 2, mem_reg_prop[2], + 2, mem_reg_prop[3], + 2, mem_reg_prop[4], + 2, mem_reg_prop[5], + 2, mem_reg_prop[6], + 2, mem_reg_prop[7]); + break; + default: + g_assert_not_reached(); + } + g_free(name); +} + +static void versal_virt_modify_dtb(const struct arm_boot_info *binfo, + void *fdt) +{ + VersalVirt *s = container_of(binfo, VersalVirt, binfo); + + fdt_add_memory_nodes(s, fdt, binfo->ram_size); +} + +static void *versal_virt_get_dtb(const struct arm_boot_info *binfo, + int *fdt_size) +{ + const VersalVirt *board = container_of(binfo, VersalVirt, binfo); + + *fdt_size = board->fdt_size; + return board->fdt; +} + +#define NUM_VIRTIO_TRANSPORT 32 +static void create_virtio_regions(VersalVirt *s) +{ + int virtio_mmio_size = 0x200; + int i; + + for (i = 0; i < NUM_VIRTIO_TRANSPORT; i++) { + char *name = g_strdup_printf("virtio%d", i);; + hwaddr base = MM_TOP_RSVD + i * virtio_mmio_size; + int irq = VERSAL_RSVD_HIGH_IRQ_FIRST + i; + MemoryRegion *mr; + DeviceState *dev; + qemu_irq pic_irq; + + pic_irq = qdev_get_gpio_in(DEVICE(&s->soc.fpd.apu.gic), irq); + dev = qdev_create(NULL, "virtio-mmio"); + object_property_add_child(OBJECT(&s->soc), name, OBJECT(dev), + &error_fatal); + qdev_init_nofail(dev); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic_irq); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); + memory_region_add_subregion(&s->soc.mr_ps, base, mr); + sysbus_create_simple("virtio-mmio", base, pic_irq); + } + + for (i = 0; i < NUM_VIRTIO_TRANSPORT; i++) { + hwaddr base = MM_TOP_RSVD + i * virtio_mmio_size; + int irq = VERSAL_RSVD_HIGH_IRQ_FIRST + i; + char *name = g_strdup_printf("/virtio_mmio@%" PRIx64, base); + + qemu_fdt_add_subnode(s->fdt, name); + qemu_fdt_setprop(s->fdt, name, "dma-coherent", NULL, 0); + qemu_fdt_setprop_cells(s->fdt, name, "interrupts", + GIC_FDT_IRQ_TYPE_SPI, irq, + GIC_FDT_IRQ_FLAGS_EDGE_LO_HI); + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", + 2, base, 2, virtio_mmio_size); + qemu_fdt_setprop_string(s->fdt, name, "compatible", "virtio,mmio"); + g_free(name); + } +} + +static void versal_virt_init(MachineState *machine) +{ + VersalVirt *s = XLNX_VERSAL_VIRT_MACHINE(machine); + int psci_conduit = QEMU_PSCI_CONDUIT_DISABLED; + + /* + * If the user provides an Operating System to be loaded, we expect them + * to use the -kernel command line option. + * + * Users can load firmware or boot-loaders with the -device loader options. + * + * When loading an OS, we generate a dtb and let arm_load_kernel() select + * where it gets loaded. This dtb will be passed to the kernel in x0. + * + * If there's no -kernel option, we generate a DTB and place it at 0x1000 + * for the bootloaders or firmware to pick up. + * + * If users want to provide their own DTB, they can use the -dtb option. + * These dtb's will have their memory nodes modified to match QEMU's + * selected ram_size option before they get passed to the kernel or fw. + * + * When loading an OS, we turn on QEMU's PSCI implementation with SMC + * as the PSCI conduit. When there's no -kernel, we assume the user + * provides EL3 firmware to handle PSCI. + */ + if (machine->kernel_filename) { + psci_conduit = QEMU_PSCI_CONDUIT_SMC; + } + + memory_region_allocate_system_memory(&s->mr_ddr, NULL, "ddr", + machine->ram_size); + + sysbus_init_child_obj(OBJECT(machine), "xlnx-ve", &s->soc, + sizeof(s->soc), TYPE_XLNX_VERSAL); + object_property_set_link(OBJECT(&s->soc), OBJECT(&s->mr_ddr), + "ddr", &error_abort); + object_property_set_int(OBJECT(&s->soc), psci_conduit, + "psci-conduit", &error_abort); + object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); + + fdt_create(s); + create_virtio_regions(s); + fdt_add_gem_nodes(s); + fdt_add_uart_nodes(s); + fdt_add_gic_nodes(s); + fdt_add_timer_nodes(s); + fdt_add_cpu_nodes(s, psci_conduit); + fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz); + fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz); + + /* Make the APU cpu address space visible to virtio and other + * modules unaware of muliple address-spaces. */ + memory_region_add_subregion_overlap(get_system_memory(), + 0, &s->soc.fpd.apu.mr, 0); + + s->binfo.ram_size = machine->ram_size; + s->binfo.kernel_filename = machine->kernel_filename; + s->binfo.kernel_cmdline = machine->kernel_cmdline; + s->binfo.initrd_filename = machine->initrd_filename; + s->binfo.loader_start = 0x0; + s->binfo.get_dtb = versal_virt_get_dtb; + s->binfo.modify_dtb = versal_virt_modify_dtb; + if (machine->kernel_filename) { + arm_load_kernel(s->soc.fpd.apu.cpu[0], &s->binfo); + } else { + AddressSpace *as = arm_boot_address_space(s->soc.fpd.apu.cpu[0], + &s->binfo); + /* Some boot-loaders (e.g u-boot) don't like blobs at address 0 (NULL). + * Offset things by 4K. */ + s->binfo.loader_start = 0x1000; + s->binfo.dtb_limit = 0x1000000; + if (arm_load_dtb(s->binfo.loader_start, + &s->binfo, s->binfo.dtb_limit, as) < 0) { + exit(EXIT_FAILURE); + } + } +} + +static void versal_virt_machine_instance_init(Object *obj) +{ +} + +static void versal_virt_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->desc = "Xilinx Versal Virtual development board"; + mc->init = versal_virt_init; + mc->max_cpus = XLNX_VERSAL_NR_ACPUS; + mc->default_cpus = XLNX_VERSAL_NR_ACPUS; + mc->no_cdrom = true; +} + +static const TypeInfo versal_virt_machine_init_typeinfo = { + .name = TYPE_XLNX_VERSAL_VIRT_MACHINE, + .parent = TYPE_MACHINE, + .class_init = versal_virt_machine_class_init, + .instance_init = versal_virt_machine_instance_init, + .instance_size = sizeof(VersalVirt), +}; + +static void versal_virt_machine_init_register_types(void) +{ + type_register_static(&versal_virt_machine_init_typeinfo); +} + +type_init(versal_virt_machine_init_register_types) + diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c new file mode 100644 index 0000000000..5ee58c09be --- /dev/null +++ b/hw/arm/xlnx-versal.c @@ -0,0 +1,323 @@ +/* + * Xilinx Versal SoC model. + * + * Copyright (c) 2018 Xilinx Inc. + * Written by Edgar E. Iglesias + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "qemu/log.h" +#include "hw/sysbus.h" +#include "net/net.h" +#include "sysemu/sysemu.h" +#include "sysemu/kvm.h" +#include "hw/arm/arm.h" +#include "kvm_arm.h" +#include "hw/misc/unimp.h" +#include "hw/intc/arm_gicv3_common.h" +#include "hw/arm/xlnx-versal.h" + +#define XLNX_VERSAL_ACPU_TYPE ARM_CPU_TYPE_NAME("cortex-a72") +#define GEM_REVISION 0x40070106 + +static void versal_create_apu_cpus(Versal *s) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->fpd.apu.cpu); i++) { + Object *obj; + char *name; + + obj = object_new(XLNX_VERSAL_ACPU_TYPE); + if (!obj) { + /* Secondary CPUs start in PSCI powered-down state */ + error_report("Unable to create apu.cpu[%d] of type %s", + i, XLNX_VERSAL_ACPU_TYPE); + exit(EXIT_FAILURE); + } + + name = g_strdup_printf("apu-cpu[%d]", i); + object_property_add_child(OBJECT(s), name, obj, &error_fatal); + g_free(name); + + object_property_set_int(obj, s->cfg.psci_conduit, + "psci-conduit", &error_abort); + if (i) { + object_property_set_bool(obj, true, + "start-powered-off", &error_abort); + } + + object_property_set_int(obj, ARRAY_SIZE(s->fpd.apu.cpu), + "core-count", &error_abort); + object_property_set_link(obj, OBJECT(&s->fpd.apu.mr), "memory", + &error_abort); + object_property_set_bool(obj, true, "realized", &error_fatal); + s->fpd.apu.cpu[i] = ARM_CPU(obj); + } +} + +static void versal_create_apu_gic(Versal *s, qemu_irq *pic) +{ + static const uint64_t addrs[] = { + MM_GIC_APU_DIST_MAIN, + MM_GIC_APU_REDIST_0 + }; + SysBusDevice *gicbusdev; + DeviceState *gicdev; + int nr_apu_cpus = ARRAY_SIZE(s->fpd.apu.cpu); + int i; + + sysbus_init_child_obj(OBJECT(s), "apu-gic", + &s->fpd.apu.gic, sizeof(s->fpd.apu.gic), + gicv3_class_name()); + gicbusdev = SYS_BUS_DEVICE(&s->fpd.apu.gic); + gicdev = DEVICE(&s->fpd.apu.gic); + qdev_prop_set_uint32(gicdev, "revision", 3); + qdev_prop_set_uint32(gicdev, "num-cpu", 2); + qdev_prop_set_uint32(gicdev, "num-irq", XLNX_VERSAL_NR_IRQS + 32); + qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1); + qdev_prop_set_uint32(gicdev, "redist-region-count[0]", 2); + qdev_prop_set_bit(gicdev, "has-security-extensions", true); + + object_property_set_bool(OBJECT(&s->fpd.apu.gic), true, "realized", + &error_fatal); + + for (i = 0; i < ARRAY_SIZE(addrs); i++) { + MemoryRegion *mr; + + mr = sysbus_mmio_get_region(gicbusdev, i); + memory_region_add_subregion(&s->fpd.apu.mr, addrs[i], mr); + } + + for (i = 0; i < nr_apu_cpus; i++) { + DeviceState *cpudev = DEVICE(s->fpd.apu.cpu[i]); + int ppibase = XLNX_VERSAL_NR_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + qemu_irq maint_irq; + int ti; + /* Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = VERSAL_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = VERSAL_TIMER_VIRT_IRQ, + [GTIMER_HYP] = VERSAL_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = VERSAL_TIMER_S_EL1_IRQ, + }; + + for (ti = 0; ti < ARRAY_SIZE(timer_irq); ti++) { + qdev_connect_gpio_out(cpudev, ti, + qdev_get_gpio_in(gicdev, + ppibase + timer_irq[ti])); + } + maint_irq = qdev_get_gpio_in(gicdev, + ppibase + VERSAL_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, maint_irq); + sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicbusdev, i + nr_apu_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicbusdev, i + 2 * nr_apu_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicbusdev, i + 3 * nr_apu_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } + + for (i = 0; i < XLNX_VERSAL_NR_IRQS; i++) { + pic[i] = qdev_get_gpio_in(gicdev, i); + } +} + +static void versal_create_uarts(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.uart); i++) { + static const int irqs[] = { VERSAL_UART0_IRQ_0, VERSAL_UART1_IRQ_0}; + static const uint64_t addrs[] = { MM_UART0, MM_UART1 }; + char *name = g_strdup_printf("uart%d", i); + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "pl011"); + s->lpd.iou.uart[i] = SYS_BUS_DEVICE(dev); + qdev_prop_set_chr(dev, "chardev", serial_hd(i)); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.uart[i], 0); + memory_region_add_subregion(&s->mr_ps, addrs[i], mr); + + sysbus_connect_irq(s->lpd.iou.uart[i], 0, pic[irqs[i]]); + g_free(name); + } +} + +static void versal_create_gems(Versal *s, qemu_irq *pic) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.gem); i++) { + static const int irqs[] = { VERSAL_GEM0_IRQ_0, VERSAL_GEM1_IRQ_0}; + static const uint64_t addrs[] = { MM_GEM0, MM_GEM1 }; + char *name = g_strdup_printf("gem%d", i); + NICInfo *nd = &nd_table[i]; + DeviceState *dev; + MemoryRegion *mr; + + dev = qdev_create(NULL, "cadence_gem"); + s->lpd.iou.gem[i] = SYS_BUS_DEVICE(dev); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + if (nd->used) { + qemu_check_nic_model(nd, "cadence_gem"); + qdev_set_nic_properties(dev, nd); + } + object_property_set_int(OBJECT(s->lpd.iou.gem[i]), + 2, "num-priority-queues", + &error_abort); + object_property_set_link(OBJECT(s->lpd.iou.gem[i]), + OBJECT(&s->mr_ps), "dma", + &error_abort); + qdev_init_nofail(dev); + + mr = sysbus_mmio_get_region(s->lpd.iou.gem[i], 0); + memory_region_add_subregion(&s->mr_ps, addrs[i], mr); + + sysbus_connect_irq(s->lpd.iou.gem[i], 0, pic[irqs[i]]); + g_free(name); + } +} + +/* This takes the board allocated linear DDR memory and creates aliases + * for each split DDR range/aperture on the Versal address map. + */ +static void versal_map_ddr(Versal *s) +{ + uint64_t size = memory_region_size(s->cfg.mr_ddr); + /* Describes the various split DDR access regions. */ + static const struct { + uint64_t base; + uint64_t size; + } addr_ranges[] = { + { MM_TOP_DDR, MM_TOP_DDR_SIZE }, + { MM_TOP_DDR_2, MM_TOP_DDR_2_SIZE }, + { MM_TOP_DDR_3, MM_TOP_DDR_3_SIZE }, + { MM_TOP_DDR_4, MM_TOP_DDR_4_SIZE } + }; + uint64_t offset = 0; + int i; + + assert(ARRAY_SIZE(addr_ranges) == ARRAY_SIZE(s->noc.mr_ddr_ranges)); + for (i = 0; i < ARRAY_SIZE(addr_ranges) && size; i++) { + char *name; + uint64_t mapsize; + + mapsize = size < addr_ranges[i].size ? size : addr_ranges[i].size; + name = g_strdup_printf("noc-ddr-range%d", i); + /* Create the MR alias. */ + memory_region_init_alias(&s->noc.mr_ddr_ranges[i], OBJECT(s), + name, s->cfg.mr_ddr, + offset, mapsize); + + /* Map it onto the NoC MR. */ + memory_region_add_subregion(&s->mr_ps, addr_ranges[i].base, + &s->noc.mr_ddr_ranges[i]); + offset += mapsize; + size -= mapsize; + g_free(name); + } +} + +static void versal_unimp_area(Versal *s, const char *name, + MemoryRegion *mr, + hwaddr base, hwaddr size) +{ + DeviceState *dev = qdev_create(NULL, TYPE_UNIMPLEMENTED_DEVICE); + MemoryRegion *mr_dev; + + qdev_prop_set_string(dev, "name", name); + qdev_prop_set_uint64(dev, "size", size); + object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal); + qdev_init_nofail(dev); + + mr_dev = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); + memory_region_add_subregion(mr, base, mr_dev); +} + +static void versal_unimp(Versal *s) +{ + versal_unimp_area(s, "psm", &s->mr_ps, + MM_PSM_START, MM_PSM_END - MM_PSM_START); + versal_unimp_area(s, "crl", &s->mr_ps, + MM_CRL, MM_CRL_SIZE); + versal_unimp_area(s, "crf", &s->mr_ps, + MM_FPD_CRF, MM_FPD_CRF_SIZE); + versal_unimp_area(s, "iou-scntr", &s->mr_ps, + MM_IOU_SCNTR, MM_IOU_SCNTR_SIZE); + versal_unimp_area(s, "iou-scntr-seucre", &s->mr_ps, + MM_IOU_SCNTRS, MM_IOU_SCNTRS_SIZE); +} + +static void versal_realize(DeviceState *dev, Error **errp) +{ + Versal *s = XLNX_VERSAL(dev); + qemu_irq pic[XLNX_VERSAL_NR_IRQS]; + + versal_create_apu_cpus(s); + versal_create_apu_gic(s, pic); + versal_create_uarts(s, pic); + versal_create_gems(s, pic); + versal_map_ddr(s); + versal_unimp(s); + + /* Create the On Chip Memory (OCM). */ + memory_region_init_ram(&s->lpd.mr_ocm, OBJECT(s), "ocm", + MM_OCM_SIZE, &error_fatal); + + memory_region_add_subregion_overlap(&s->mr_ps, MM_OCM, &s->lpd.mr_ocm, 0); + memory_region_add_subregion_overlap(&s->fpd.apu.mr, 0, &s->mr_ps, 0); +} + +static void versal_init(Object *obj) +{ + Versal *s = XLNX_VERSAL(obj); + + memory_region_init(&s->fpd.apu.mr, obj, "mr-apu", UINT64_MAX); + memory_region_init(&s->mr_ps, obj, "mr-ps-switch", UINT64_MAX); +} + +static Property versal_properties[] = { + DEFINE_PROP_LINK("ddr", Versal, cfg.mr_ddr, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("psci-conduit", Versal, cfg.psci_conduit, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void versal_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = versal_realize; + dc->props = versal_properties; + /* No VMSD since we haven't got any top-level SoC state to save. */ +} + +static const TypeInfo versal_info = { + .name = TYPE_XLNX_VERSAL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Versal), + .instance_init = versal_init, + .class_init = versal_class_init, +}; + +static void versal_register_types(void) +{ + type_register_static(&versal_info); +} + +type_init(versal_register_types); diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs index b570531291..c4947d7ae7 100644 --- a/hw/char/Makefile.objs +++ b/hw/char/Makefile.objs @@ -1,5 +1,6 @@ common-obj-$(CONFIG_IPACK) += ipoctal232.o common-obj-$(CONFIG_ESCC) += escc.o +common-obj-$(CONFIG_NRF51_SOC) += nrf51_uart.o common-obj-$(CONFIG_PARALLEL) += parallel.o common-obj-$(CONFIG_PARALLEL) += parallel-isa.o common-obj-$(CONFIG_PL011) += pl011.o diff --git a/hw/char/nrf51_uart.c b/hw/char/nrf51_uart.c new file mode 100644 index 0000000000..2f5fae6167 --- /dev/null +++ b/hw/char/nrf51_uart.c @@ -0,0 +1,330 @@ +/* + * nRF51 SoC UART emulation + * + * See nRF51 Series Reference Manual, "29 Universal Asynchronous + * Receiver/Transmitter" for hardware specifications: + * http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf + * + * Copyright (c) 2018 Julia Suvorova <jusual@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/char/nrf51_uart.h" +#include "trace.h" + +static void nrf51_uart_update_irq(NRF51UARTState *s) +{ + bool irq = false; + + irq |= (s->reg[R_UART_RXDRDY] && + (s->reg[R_UART_INTEN] & R_UART_INTEN_RXDRDY_MASK)); + irq |= (s->reg[R_UART_TXDRDY] && + (s->reg[R_UART_INTEN] & R_UART_INTEN_TXDRDY_MASK)); + irq |= (s->reg[R_UART_ERROR] && + (s->reg[R_UART_INTEN] & R_UART_INTEN_ERROR_MASK)); + irq |= (s->reg[R_UART_RXTO] && + (s->reg[R_UART_INTEN] & R_UART_INTEN_RXTO_MASK)); + + qemu_set_irq(s->irq, irq); +} + +static uint64_t uart_read(void *opaque, hwaddr addr, unsigned int size) +{ + NRF51UARTState *s = NRF51_UART(opaque); + uint64_t r; + + if (!s->enabled) { + return 0; + } + + switch (addr) { + case A_UART_RXD: + r = s->rx_fifo[s->rx_fifo_pos]; + if (s->rx_started && s->rx_fifo_len) { + s->rx_fifo_pos = (s->rx_fifo_pos + 1) % UART_FIFO_LENGTH; + s->rx_fifo_len--; + if (s->rx_fifo_len) { + s->reg[R_UART_RXDRDY] = 1; + nrf51_uart_update_irq(s); + } + qemu_chr_fe_accept_input(&s->chr); + } + break; + case A_UART_INTENSET: + case A_UART_INTENCLR: + case A_UART_INTEN: + r = s->reg[R_UART_INTEN]; + break; + default: + r = s->reg[addr / 4]; + break; + } + + trace_nrf51_uart_read(addr, r, size); + + return r; +} + +static gboolean uart_transmit(GIOChannel *chan, GIOCondition cond, void *opaque) +{ + NRF51UARTState *s = NRF51_UART(opaque); + int r; + uint8_t c = s->reg[R_UART_TXD]; + + s->watch_tag = 0; + + r = qemu_chr_fe_write(&s->chr, &c, 1); + if (r <= 0) { + s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, + uart_transmit, s); + if (!s->watch_tag) { + /* The hardware has no transmit error reporting, + * so silently drop the byte + */ + goto buffer_drained; + } + return FALSE; + } + +buffer_drained: + s->reg[R_UART_TXDRDY] = 1; + s->pending_tx_byte = false; + return FALSE; +} + +static void uart_cancel_transmit(NRF51UARTState *s) +{ + if (s->watch_tag) { + g_source_remove(s->watch_tag); + s->watch_tag = 0; + } +} + +static void uart_write(void *opaque, hwaddr addr, + uint64_t value, unsigned int size) +{ + NRF51UARTState *s = NRF51_UART(opaque); + + trace_nrf51_uart_write(addr, value, size); + + if (!s->enabled && (addr != A_UART_ENABLE)) { + return; + } + + switch (addr) { + case A_UART_TXD: + if (!s->pending_tx_byte && s->tx_started) { + s->reg[R_UART_TXD] = value; + s->pending_tx_byte = true; + uart_transmit(NULL, G_IO_OUT, s); + } + break; + case A_UART_INTEN: + s->reg[R_UART_INTEN] = value; + break; + case A_UART_INTENSET: + s->reg[R_UART_INTEN] |= value; + break; + case A_UART_INTENCLR: + s->reg[R_UART_INTEN] &= ~value; + break; + case A_UART_TXDRDY ... A_UART_RXTO: + s->reg[addr / 4] = value; + break; + case A_UART_ERRORSRC: + s->reg[addr / 4] &= ~value; + break; + case A_UART_RXD: + break; + case A_UART_RXDRDY: + if (value == 0) { + s->reg[R_UART_RXDRDY] = 0; + } + break; + case A_UART_STARTTX: + if (value == 1) { + s->tx_started = true; + } + break; + case A_UART_STARTRX: + if (value == 1) { + s->rx_started = true; + } + break; + case A_UART_ENABLE: + if (value) { + if (value == 4) { + s->enabled = true; + } + break; + } + s->enabled = false; + value = 1; + /* fall through */ + case A_UART_SUSPEND: + case A_UART_STOPTX: + if (value == 1) { + s->tx_started = false; + } + /* fall through */ + case A_UART_STOPRX: + if (addr != A_UART_STOPTX && value == 1) { + s->rx_started = false; + s->reg[R_UART_RXTO] = 1; + } + break; + default: + s->reg[addr / 4] = value; + break; + } + nrf51_uart_update_irq(s); +} + +static const MemoryRegionOps uart_ops = { + .read = uart_read, + .write = uart_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void nrf51_uart_reset(DeviceState *dev) +{ + NRF51UARTState *s = NRF51_UART(dev); + + s->pending_tx_byte = 0; + + uart_cancel_transmit(s); + + memset(s->reg, 0, sizeof(s->reg)); + + s->reg[R_UART_PSELRTS] = 0xFFFFFFFF; + s->reg[R_UART_PSELTXD] = 0xFFFFFFFF; + s->reg[R_UART_PSELCTS] = 0xFFFFFFFF; + s->reg[R_UART_PSELRXD] = 0xFFFFFFFF; + s->reg[R_UART_BAUDRATE] = 0x4000000; + + s->rx_fifo_len = 0; + s->rx_fifo_pos = 0; + s->rx_started = false; + s->tx_started = false; + s->enabled = false; +} + +static void uart_receive(void *opaque, const uint8_t *buf, int size) +{ + + NRF51UARTState *s = NRF51_UART(opaque); + int i; + + if (size == 0 || s->rx_fifo_len >= UART_FIFO_LENGTH) { + return; + } + + for (i = 0; i < size; i++) { + uint32_t pos = (s->rx_fifo_pos + s->rx_fifo_len) % UART_FIFO_LENGTH; + s->rx_fifo[pos] = buf[i]; + s->rx_fifo_len++; + } + + s->reg[R_UART_RXDRDY] = 1; + nrf51_uart_update_irq(s); +} + +static int uart_can_receive(void *opaque) +{ + NRF51UARTState *s = NRF51_UART(opaque); + + return s->rx_started ? (UART_FIFO_LENGTH - s->rx_fifo_len) : 0; +} + +static void uart_event(void *opaque, int event) +{ + NRF51UARTState *s = NRF51_UART(opaque); + + if (event == CHR_EVENT_BREAK) { + s->reg[R_UART_ERRORSRC] |= 3; + s->reg[R_UART_ERROR] = 1; + nrf51_uart_update_irq(s); + } +} + +static void nrf51_uart_realize(DeviceState *dev, Error **errp) +{ + NRF51UARTState *s = NRF51_UART(dev); + + qemu_chr_fe_set_handlers(&s->chr, uart_can_receive, uart_receive, + uart_event, NULL, s, NULL, true); +} + +static void nrf51_uart_init(Object *obj) +{ + NRF51UARTState *s = NRF51_UART(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->iomem, obj, &uart_ops, s, + "nrf51_soc.uart", UART_SIZE); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + +static int nrf51_uart_post_load(void *opaque, int version_id) +{ + NRF51UARTState *s = NRF51_UART(opaque); + + if (s->pending_tx_byte) { + s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, + uart_transmit, s); + } + + return 0; +} + +static const VMStateDescription nrf51_uart_vmstate = { + .name = "nrf51_soc.uart", + .post_load = nrf51_uart_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(reg, NRF51UARTState, 0x56C), + VMSTATE_UINT8_ARRAY(rx_fifo, NRF51UARTState, UART_FIFO_LENGTH), + VMSTATE_UINT32(rx_fifo_pos, NRF51UARTState), + VMSTATE_UINT32(rx_fifo_len, NRF51UARTState), + VMSTATE_BOOL(rx_started, NRF51UARTState), + VMSTATE_BOOL(tx_started, NRF51UARTState), + VMSTATE_BOOL(pending_tx_byte, NRF51UARTState), + VMSTATE_BOOL(enabled, NRF51UARTState), + VMSTATE_END_OF_LIST() + } +}; + +static Property nrf51_uart_properties[] = { + DEFINE_PROP_CHR("chardev", NRF51UARTState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void nrf51_uart_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = nrf51_uart_reset; + dc->realize = nrf51_uart_realize; + dc->props = nrf51_uart_properties; + dc->vmsd = &nrf51_uart_vmstate; +} + +static const TypeInfo nrf51_uart_info = { + .name = TYPE_NRF51_UART, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NRF51UARTState), + .instance_init = nrf51_uart_init, + .class_init = nrf51_uart_class_init +}; + +static void nrf51_uart_register_types(void) +{ + type_register_static(&nrf51_uart_info); +} + +type_init(nrf51_uart_register_types) diff --git a/hw/char/trace-events b/hw/char/trace-events index b64213d4dd..de34a74399 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -73,3 +73,7 @@ cmsdk_apb_uart_receive(uint8_t c) "CMSDK APB UART: got character 0x%x from backe cmsdk_apb_uart_tx_pending(void) "CMSDK APB UART: character send to backend pending" cmsdk_apb_uart_tx(uint8_t c) "CMSDK APB UART: character 0x%x sent to backend" cmsdk_apb_uart_set_params(int speed) "CMSDK APB UART: params set to %d 8N1" + +# hw/char/nrf51_uart.c +nrf51_uart_read(uint64_t addr, uint64_t r, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" +nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" diff --git a/include/hw/arm/nrf51_soc.h b/include/hw/arm/nrf51_soc.h index f4e092b554..73fc92e9a8 100644 --- a/include/hw/arm/nrf51_soc.h +++ b/include/hw/arm/nrf51_soc.h @@ -12,6 +12,7 @@ #include "hw/sysbus.h" #include "hw/arm/armv7m.h" +#include "hw/char/nrf51_uart.h" #define TYPE_NRF51_SOC "nrf51-soc" #define NRF51_SOC(obj) \ @@ -24,6 +25,8 @@ typedef struct NRF51State { /*< public >*/ ARMv7MState cpu; + NRF51UARTState uart; + MemoryRegion iomem; MemoryRegion sram; MemoryRegion flash; diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h new file mode 100644 index 0000000000..9da621e4b6 --- /dev/null +++ b/include/hw/arm/xlnx-versal.h @@ -0,0 +1,122 @@ +/* + * Model of the Xilinx Versal + * + * Copyright (c) 2018 Xilinx Inc. + * Written by Edgar E. Iglesias + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#ifndef XLNX_VERSAL_H +#define XLNX_VERSAL_H + +#include "hw/sysbus.h" +#include "hw/arm/arm.h" +#include "hw/intc/arm_gicv3.h" + +#define TYPE_XLNX_VERSAL "xlnx-versal" +#define XLNX_VERSAL(obj) OBJECT_CHECK(Versal, (obj), TYPE_XLNX_VERSAL) + +#define XLNX_VERSAL_NR_ACPUS 2 +#define XLNX_VERSAL_NR_UARTS 2 +#define XLNX_VERSAL_NR_GEMS 2 +#define XLNX_VERSAL_NR_IRQS 256 + +typedef struct Versal { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + struct { + struct { + MemoryRegion mr; + ARMCPU *cpu[XLNX_VERSAL_NR_ACPUS]; + GICv3State gic; + } apu; + } fpd; + + MemoryRegion mr_ps; + + struct { + /* 4 ranges to access DDR. */ + MemoryRegion mr_ddr_ranges[4]; + } noc; + + struct { + MemoryRegion mr_ocm; + + struct { + SysBusDevice *uart[XLNX_VERSAL_NR_UARTS]; + SysBusDevice *gem[XLNX_VERSAL_NR_GEMS]; + } iou; + } lpd; + + struct { + MemoryRegion *mr_ddr; + uint32_t psci_conduit; + } cfg; +} Versal; + +/* Memory-map and IRQ definitions. Copied a subset from + * auto-generated files. */ + +#define VERSAL_GIC_MAINT_IRQ 9 +#define VERSAL_TIMER_VIRT_IRQ 11 +#define VERSAL_TIMER_S_EL1_IRQ 13 +#define VERSAL_TIMER_NS_EL1_IRQ 14 +#define VERSAL_TIMER_NS_EL2_IRQ 10 + +#define VERSAL_UART0_IRQ_0 18 +#define VERSAL_UART1_IRQ_0 19 +#define VERSAL_GEM0_IRQ_0 56 +#define VERSAL_GEM0_WAKE_IRQ_0 57 +#define VERSAL_GEM1_IRQ_0 58 +#define VERSAL_GEM1_WAKE_IRQ_0 59 + +/* Architecturally eserved IRQs suitable for virtualization. */ +#define VERSAL_RSVD_HIGH_IRQ_FIRST 160 +#define VERSAL_RSVD_HIGH_IRQ_LAST 255 + +#define MM_TOP_RSVD 0xa0000000U +#define MM_TOP_RSVD_SIZE 0x4000000 +#define MM_GIC_APU_DIST_MAIN 0xf9000000U +#define MM_GIC_APU_DIST_MAIN_SIZE 0x10000 +#define MM_GIC_APU_REDIST_0 0xf9080000U +#define MM_GIC_APU_REDIST_0_SIZE 0x80000 + +#define MM_UART0 0xff000000U +#define MM_UART0_SIZE 0x10000 +#define MM_UART1 0xff010000U +#define MM_UART1_SIZE 0x10000 + +#define MM_GEM0 0xff0c0000U +#define MM_GEM0_SIZE 0x10000 +#define MM_GEM1 0xff0d0000U +#define MM_GEM1_SIZE 0x10000 + +#define MM_OCM 0xfffc0000U +#define MM_OCM_SIZE 0x40000 + +#define MM_TOP_DDR 0x0 +#define MM_TOP_DDR_SIZE 0x80000000U +#define MM_TOP_DDR_2 0x800000000ULL +#define MM_TOP_DDR_2_SIZE 0x800000000ULL +#define MM_TOP_DDR_3 0xc000000000ULL +#define MM_TOP_DDR_3_SIZE 0x4000000000ULL +#define MM_TOP_DDR_4 0x10000000000ULL +#define MM_TOP_DDR_4_SIZE 0xb780000000ULL + +#define MM_PSM_START 0xffc80000U +#define MM_PSM_END 0xffcf0000U + +#define MM_CRL 0xff5e0000U +#define MM_CRL_SIZE 0x300000 +#define MM_IOU_SCNTR 0xff130000U +#define MM_IOU_SCNTR_SIZE 0x10000 +#define MM_IOU_SCNTRS 0xff140000U +#define MM_IOU_SCNTRS_SIZE 0x10000 +#define MM_FPD_CRF 0xfd1a0000U +#define MM_FPD_CRF_SIZE 0x140000 +#endif diff --git a/include/hw/char/nrf51_uart.h b/include/hw/char/nrf51_uart.h new file mode 100644 index 0000000000..e3ecb7c81c --- /dev/null +++ b/include/hw/char/nrf51_uart.h @@ -0,0 +1,78 @@ +/* + * nRF51 SoC UART emulation + * + * Copyright (c) 2018 Julia Suvorova <jusual@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#ifndef NRF51_UART_H +#define NRF51_UART_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "hw/registerfields.h" + +#define UART_FIFO_LENGTH 6 +#define UART_BASE 0x40002000 +#define UART_SIZE 0x1000 + +#define TYPE_NRF51_UART "nrf51_soc.uart" +#define NRF51_UART(obj) OBJECT_CHECK(NRF51UARTState, (obj), TYPE_NRF51_UART) + +REG32(UART_STARTRX, 0x000) +REG32(UART_STOPRX, 0x004) +REG32(UART_STARTTX, 0x008) +REG32(UART_STOPTX, 0x00C) +REG32(UART_SUSPEND, 0x01C) + +REG32(UART_CTS, 0x100) +REG32(UART_NCTS, 0x104) +REG32(UART_RXDRDY, 0x108) +REG32(UART_TXDRDY, 0x11C) +REG32(UART_ERROR, 0x124) +REG32(UART_RXTO, 0x144) + +REG32(UART_INTEN, 0x300) + FIELD(UART_INTEN, CTS, 0, 1) + FIELD(UART_INTEN, NCTS, 1, 1) + FIELD(UART_INTEN, RXDRDY, 2, 1) + FIELD(UART_INTEN, TXDRDY, 7, 1) + FIELD(UART_INTEN, ERROR, 9, 1) + FIELD(UART_INTEN, RXTO, 17, 1) +REG32(UART_INTENSET, 0x304) +REG32(UART_INTENCLR, 0x308) +REG32(UART_ERRORSRC, 0x480) +REG32(UART_ENABLE, 0x500) +REG32(UART_PSELRTS, 0x508) +REG32(UART_PSELTXD, 0x50C) +REG32(UART_PSELCTS, 0x510) +REG32(UART_PSELRXD, 0x514) +REG32(UART_RXD, 0x518) +REG32(UART_TXD, 0x51C) +REG32(UART_BAUDRATE, 0x524) +REG32(UART_CONFIG, 0x56C) + +typedef struct NRF51UARTState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + CharBackend chr; + qemu_irq irq; + guint watch_tag; + + uint8_t rx_fifo[UART_FIFO_LENGTH]; + unsigned int rx_fifo_pos; + unsigned int rx_fifo_len; + + uint32_t reg[0x56C]; + + bool rx_started; + bool tx_started; + bool pending_tx_byte; + bool enabled; +} NRF51UARTState; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index 8f16e96b6c..784a4c2dfc 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -774,6 +774,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; + bool no_aa32 = false; /* If we needed to query the host kernel for the CPU features * then it's possible that might have failed in the initfn, but @@ -820,6 +821,16 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_V7VE); } } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + if (arm_feature(env, ARM_FEATURE_V7VE)) { /* v7 Virtualization Extensions. In real hardware this implies * EL2 and also the presence of the Security Extensions. @@ -829,7 +840,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * Presence of EL2 itself is ARM_FEATURE_EL2, and of the * Security Extensions is ARM_FEATURE_EL3. */ - assert(cpu_isar_feature(arm_div, cpu)); + assert(no_aa32 || cpu_isar_feature(arm_div, cpu)); set_feature(env, ARM_FEATURE_LPAE); set_feature(env, ARM_FEATURE_V7); } @@ -855,7 +866,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (arm_feature(env, ARM_FEATURE_V6)) { set_feature(env, ARM_FEATURE_V5); if (!arm_feature(env, ARM_FEATURE_M)) { - assert(cpu_isar_feature(jazelle, cpu)); + assert(no_aa32 || cpu_isar_feature(jazelle, cpu)); set_feature(env, ARM_FEATURE_AUXCR); } } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index 8e6779936e..b5eff79f73 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -3296,6 +3296,11 @@ static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; } +static inline bool isar_feature_aa64_aa32(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL0) >= 2; +} + static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c index f865822e32..8ec6aed35d 100644 --- a/tests/boot-serial-test.c +++ b/tests/boot-serial-test.c @@ -62,6 +62,24 @@ static const uint8_t kernel_aarch64[] = { 0xfd, 0xff, 0xff, 0x17, /* b -12 (loop) */ }; +static const uint8_t kernel_nrf51[] = { + 0x00, 0x00, 0x00, 0x00, /* Stack top address */ + 0x09, 0x00, 0x00, 0x00, /* Reset handler address */ + 0x04, 0x4a, /* ldr r2, [pc, #16] Get ENABLE */ + 0x04, 0x21, /* movs r1, #4 */ + 0x11, 0x60, /* str r1, [r2] */ + 0x04, 0x4a, /* ldr r2, [pc, #16] Get STARTTX */ + 0x01, 0x21, /* movs r1, #1 */ + 0x11, 0x60, /* str r1, [r2] */ + 0x03, 0x4a, /* ldr r2, [pc, #12] Get TXD */ + 0x54, 0x21, /* movs r1, 'T' */ + 0x11, 0x60, /* str r1, [r2] */ + 0xfe, 0xe7, /* b . */ + 0x00, 0x25, 0x00, 0x40, /* 0x40002500 = UART ENABLE */ + 0x08, 0x20, 0x00, 0x40, /* 0x40002008 = UART STARTTX */ + 0x1c, 0x25, 0x00, 0x40 /* 0x4000251c = UART TXD */ +}; + typedef struct testdef { const char *arch; /* Target architecture */ const char *machine; /* Name of the machine */ @@ -105,6 +123,7 @@ static testdef_t tests[] = { { "hppa", "hppa", "", "SeaBIOS wants SYSTEM HALT" }, { "aarch64", "virt", "-cpu cortex-a57", "TT", sizeof(kernel_aarch64), kernel_aarch64 }, + { "arm", "microbit", "", "T", sizeof(kernel_nrf51), kernel_nrf51 }, { NULL } }; |