diff options
| -rw-r--r-- | tests/qtest/cmsdk-apb-watchdog-test.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index fe535a553c..53538f98c9 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -68,6 +68,16 @@ static const CMSDKAPBWatchdogTestArgs machine_info[] = { }, }; +static void system_reset(QTestState *qtest) +{ + QDict *resp; + + resp = qtest_qmp(qtest, "{'execute': 'system_reset'}"); + g_assert(qdict_haskey(resp, "return")); + qobject_unref(resp); + qtest_qmp_eventwait(qtest, "RESET"); +} + static void test_watchdog(const void *ptr) { const CMSDKAPBWatchdogTestArgs *args = ptr; @@ -159,6 +169,199 @@ static void test_clock_change(const void *ptr) qtest_end(); } +/* Tests the counter is not running after reset. */ +static void test_watchdog_reset(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0); + + /* + * The counter should not be running if WDOGCONTROL.INTEN has not been set, + * as it is the case after a cold reset. + */ + clock_step(15 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* Let the counter run before reset */ + writel(wdog_base + WDOGLOAD, 3000); + writel(wdog_base + WDOGCONTROL, 1); + + /* Verify it is running */ + clock_step(1000 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 3000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 2000); + + system_reset(global_qtest); + + /* Check defaults after reset */ + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* The counter should not be running after reset. */ + clock_step(1000 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + qtest_end(); +} + +/* + * Tests inten works as the counter enable based on this description: + * + * Enable the interrupt event, WDOGINT. Set HIGH to enable the counter and the + * interrupt, or LOW to disable the counter and interrupt. Reloads the counter + * from the value in WDOGLOAD when the interrupt is enabled, after previously + * being disabled. + */ +static void test_watchdog_inten(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should not be running as long as WDOGCONTROL.INTEN is + * not set + */ + writel(wdog_base + WDOGLOAD, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Set HIGH WDOGCONTROL.INTEN to enable the counter and the interrupt */ + writel(wdog_base + WDOGCONTROL, 1); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* or LOW to disable the counter and interrupt. */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(100 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* + * Reloads the counter from the value in WDOGLOAD when the interrupt is + * enabled, after previously being disabled. + */ + writel(wdog_base + WDOGCONTROL, 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Test counter is still on */ + clock_step(50 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3950); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should be running since WDOGCONTROL.INTEN is set + */ + writel(wdog_base + WDOGLOAD, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 5000); + clock_step(4999 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + /* Finally disable and check the conditions don't change */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(10 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + qtest_end(); +} + +/* + * Tests the following custom behavior: + * + * The Luminary version of this device ignores writes to this register after the + * guest has enabled interrupts (so they can only be disabled again via reset). + */ +static void test_watchdog_inten_luminary(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should not be running as long as WDOGCONTROL.INTEN is + * not set + */ + writel(wdog_base + WDOGLOAD, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Set HIGH WDOGCONTROL.INTEN to enable the counter and the interrupt */ + writel(wdog_base + WDOGCONTROL, 1); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* + * The Luminary version of this device ignores writes to this register after + * the guest has enabled interrupts + */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(100 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3400); + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0x1); + + /* They can only be disabled again via reset */ + system_reset(global_qtest); + + /* Check defaults after reset */ + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0); + + /* The counter should not be running after reset. */ + clock_step(1000 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + qtest_end(); +} + int main(int argc, char **argv) { int r; @@ -172,10 +375,22 @@ int main(int argc, char **argv) qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_clock_change", &machine_info[MACHINE_LM3S811EVB], test_clock_change); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_reset", + &machine_info[MACHINE_LM3S811EVB], + test_watchdog_reset); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_inten_luminary", + &machine_info[MACHINE_LM3S811EVB], + test_watchdog_inten_luminary); } if (qtest_has_machine(machine_info[MACHINE_MPS2_AN385].machine)) { qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_mps2", &machine_info[MACHINE_MPS2_AN385], test_watchdog); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_reset_mps2", + &machine_info[MACHINE_MPS2_AN385], + test_watchdog_reset); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_inten", + &machine_info[MACHINE_MPS2_AN385], + test_watchdog_inten); } r = g_test_run(); |