diff options
| -rw-r--r-- | hw/intc/armv7m_nvic.c | 738 | ||||
| -rw-r--r-- | hw/intc/trace-events | 15 |
2 files changed, 609 insertions, 144 deletions
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index ce22001b6c..fb4c985c54 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -17,48 +17,88 @@ #include "hw/sysbus.h" #include "qemu/timer.h" #include "hw/arm/arm.h" +#include "target/arm/cpu.h" #include "exec/address-spaces.h" -#include "gic_internal.h" #include "qemu/log.h" +#include "trace.h" + +/* IRQ number counting: + * + * the num-irq property counts the number of external IRQ lines + * + * NVICState::num_irq counts the total number of exceptions + * (external IRQs, the 15 internal exceptions including reset, + * and one for the unused exception number 0). + * + * NVIC_MAX_IRQ is the highest permitted number of external IRQ lines. + * + * NVIC_MAX_VECTORS is the highest permitted number of exceptions. + * + * Iterating through all exceptions should typically be done with + * for (i = 1; i < s->num_irq; i++) to avoid the unused slot 0. + * + * The external qemu_irq lines are the NVIC's external IRQ lines, + * so line 0 is exception 16. + * + * In the terminology of the architecture manual, "interrupts" are + * a subcategory of exception referring to the external interrupts + * (which are exception numbers NVIC_FIRST_IRQ and upward). + * For historical reasons QEMU tends to use "interrupt" and + * "exception" more or less interchangeably. + */ +#define NVIC_FIRST_IRQ 16 +#define NVIC_MAX_VECTORS 512 +#define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) + +/* Effective running priority of the CPU when no exception is active + * (higher than the highest possible priority value) + */ +#define NVIC_NOEXC_PRIO 0x100 + +typedef struct VecInfo { + /* Exception priorities can range from -3 to 255; only the unmodifiable + * priority values for RESET, NMI and HardFault can be negative. + */ + int16_t prio; + uint8_t enabled; + uint8_t pending; + uint8_t active; + uint8_t level; /* exceptions <=15 never set level */ +} VecInfo; typedef struct NVICState { - GICState gic; + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + ARMCPU *cpu; + VecInfo vectors[NVIC_MAX_VECTORS]; uint32_t prigroup; + /* vectpending and exception_prio are both cached state that can + * be recalculated from the vectors[] array and the prigroup field. + */ + unsigned int vectpending; /* highest prio pending enabled exception */ + int exception_prio; /* group prio of the highest prio active exception */ + struct { uint32_t control; uint32_t reload; int64_t tick; QEMUTimer *timer; } systick; + MemoryRegion sysregmem; - MemoryRegion gic_iomem_alias; MemoryRegion container; + uint32_t num_irq; + qemu_irq excpout; qemu_irq sysresetreq; } NVICState; #define TYPE_NVIC "armv7m_nvic" -/** - * NVICClass: - * @parent_reset: the parent class' reset handler. - * - * A model of the v7M NVIC and System Controller - */ -typedef struct NVICClass { - /*< private >*/ - ARMGICClass parent_class; - /*< public >*/ - DeviceRealize parent_realize; - void (*parent_reset)(DeviceState *dev); -} NVICClass; - -#define NVIC_CLASS(klass) \ - OBJECT_CLASS_CHECK(NVICClass, (klass), TYPE_NVIC) -#define NVIC_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NVICClass, (obj), TYPE_NVIC) + #define NVIC(obj) \ OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) @@ -125,47 +165,283 @@ static void systick_reset(NVICState *s) timer_del(s->systick.timer); } -/* The external routines use the hardware vector numbering, ie. the first - IRQ is #16. The internal GIC routines use #32 as the first IRQ. */ +static int nvic_pending_prio(NVICState *s) +{ + /* return the priority of the current pending interrupt, + * or NVIC_NOEXC_PRIO if no interrupt is pending + */ + return s->vectpending ? s->vectors[s->vectpending].prio : NVIC_NOEXC_PRIO; +} + +/* Return the value of the ISCR RETTOBASE bit: + * 1 if there is exactly one active exception + * 0 if there is more than one active exception + * UNKNOWN if there are no active exceptions (we choose 1, + * which matches the choice Cortex-M3 is documented as making). + * + * NB: some versions of the documentation talk about this + * counting "active exceptions other than the one shown by IPSR"; + * this is only different in the obscure corner case where guest + * code has manually deactivated an exception and is about + * to fail an exception-return integrity check. The definition + * above is the one from the v8M ARM ARM and is also in line + * with the behaviour documented for the Cortex-M3. + */ +static bool nvic_rettobase(NVICState *s) +{ + int irq, nhand = 0; + + for (irq = ARMV7M_EXCP_RESET; irq < s->num_irq; irq++) { + if (s->vectors[irq].active) { + nhand++; + if (nhand == 2) { + return 0; + } + } + } + + return 1; +} + +/* Return the value of the ISCR ISRPENDING bit: + * 1 if an external interrupt is pending + * 0 if no external interrupt is pending + */ +static bool nvic_isrpending(NVICState *s) +{ + int irq; + + /* We can shortcut if the highest priority pending interrupt + * happens to be external or if there is nothing pending. + */ + if (s->vectpending > NVIC_FIRST_IRQ) { + return true; + } + if (s->vectpending == 0) { + return false; + } + + for (irq = NVIC_FIRST_IRQ; irq < s->num_irq; irq++) { + if (s->vectors[irq].pending) { + return true; + } + } + return false; +} + +/* Return a mask word which clears the subpriority bits from + * a priority value for an M-profile exception, leaving only + * the group priority. + */ +static inline uint32_t nvic_gprio_mask(NVICState *s) +{ + return ~0U << (s->prigroup + 1); +} + +/* Recompute vectpending and exception_prio */ +static void nvic_recompute_state(NVICState *s) +{ + int i; + int pend_prio = NVIC_NOEXC_PRIO; + int active_prio = NVIC_NOEXC_PRIO; + int pend_irq = 0; + + for (i = 1; i < s->num_irq; i++) { + VecInfo *vec = &s->vectors[i]; + + if (vec->enabled && vec->pending && vec->prio < pend_prio) { + pend_prio = vec->prio; + pend_irq = i; + } + if (vec->active && vec->prio < active_prio) { + active_prio = vec->prio; + } + } + + s->vectpending = pend_irq; + s->exception_prio = active_prio & nvic_gprio_mask(s); + + trace_nvic_recompute_state(s->vectpending, s->exception_prio); +} + +/* Return the current execution priority of the CPU + * (equivalent to the pseudocode ExecutionPriority function). + * This is a value between -2 (NMI priority) and NVIC_NOEXC_PRIO. + */ +static inline int nvic_exec_prio(NVICState *s) +{ + CPUARMState *env = &s->cpu->env; + int running; + + if (env->daif & PSTATE_F) { /* FAULTMASK */ + running = -1; + } else if (env->daif & PSTATE_I) { /* PRIMASK */ + running = 0; + } else if (env->v7m.basepri > 0) { + running = env->v7m.basepri & nvic_gprio_mask(s); + } else { + running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ + } + /* consider priority of active handler */ + return MIN(running, s->exception_prio); +} + +/* caller must call nvic_irq_update() after this */ +static void set_prio(NVICState *s, unsigned irq, uint8_t prio) +{ + assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ + assert(irq < s->num_irq); + + s->vectors[irq].prio = prio; + + trace_nvic_set_prio(irq, prio); +} + +/* Recompute state and assert irq line accordingly. + * Must be called after changes to: + * vec->active, vec->enabled, vec->pending or vec->prio for any vector + * prigroup + */ +static void nvic_irq_update(NVICState *s) +{ + int lvl; + int pend_prio; + + nvic_recompute_state(s); + pend_prio = nvic_pending_prio(s); + + /* Raise NVIC output if this IRQ would be taken, except that we + * ignore the effects of the BASEPRI, FAULTMASK and PRIMASK (which + * will be checked for in arm_v7m_cpu_exec_interrupt()); changes + * to those CPU registers don't cause us to recalculate the NVIC + * pending info. + */ + lvl = (pend_prio < s->exception_prio); + trace_nvic_irq_update(s->vectpending, pend_prio, s->exception_prio, lvl); + qemu_set_irq(s->excpout, lvl); +} + +static void armv7m_nvic_clear_pending(void *opaque, int irq) +{ + NVICState *s = (NVICState *)opaque; + VecInfo *vec; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + + vec = &s->vectors[irq]; + trace_nvic_clear_pending(irq, vec->enabled, vec->prio); + if (vec->pending) { + vec->pending = 0; + nvic_irq_update(s); + } +} + void armv7m_nvic_set_pending(void *opaque, int irq) { NVICState *s = (NVICState *)opaque; - if (irq >= 16) - irq += 16; - gic_set_pending_private(&s->gic, 0, irq); + VecInfo *vec; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + + vec = &s->vectors[irq]; + trace_nvic_set_pending(irq, vec->enabled, vec->prio); + if (!vec->pending) { + vec->pending = 1; + nvic_irq_update(s); + } } /* Make pending IRQ active. */ int armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; - uint32_t irq; - - irq = gic_acknowledge_irq(&s->gic, 0, MEMTXATTRS_UNSPECIFIED); - if (irq == 1023) - hw_error("Interrupt but no vector\n"); - if (irq >= 32) - irq -= 16; - return irq; + CPUARMState *env = &s->cpu->env; + const int pending = s->vectpending; + const int running = nvic_exec_prio(s); + int pendgroupprio; + VecInfo *vec; + + assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); + + vec = &s->vectors[pending]; + + assert(vec->enabled); + assert(vec->pending); + + pendgroupprio = vec->prio & nvic_gprio_mask(s); + assert(pendgroupprio < running); + + trace_nvic_acknowledge_irq(pending, vec->prio); + + vec->active = 1; + vec->pending = 0; + + env->v7m.exception = s->vectpending; + + nvic_irq_update(s); + + return env->v7m.exception; } void armv7m_nvic_complete_irq(void *opaque, int irq) { NVICState *s = (NVICState *)opaque; - if (irq >= 16) - irq += 16; - gic_complete_irq(&s->gic, 0, irq, MEMTXATTRS_UNSPECIFIED); + VecInfo *vec; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + + vec = &s->vectors[irq]; + + trace_nvic_complete_irq(irq); + + vec->active = 0; + if (vec->level) { + /* Re-pend the exception if it's still held high; only + * happens for extenal IRQs + */ + assert(irq >= NVIC_FIRST_IRQ); + vec->pending = 1; + } + + nvic_irq_update(s); +} + +/* callback when external interrupt line is changed */ +static void set_irq_level(void *opaque, int n, int level) +{ + NVICState *s = opaque; + VecInfo *vec; + + n += NVIC_FIRST_IRQ; + + assert(n >= NVIC_FIRST_IRQ && n < s->num_irq); + + trace_nvic_set_irq_level(n, level); + + /* The pending status of an external interrupt is + * latched on rising edge and exception handler return. + * + * Pulsing the IRQ will always run the handler + * once, and the handler will re-run until the + * level is low when the handler completes. + */ + vec = &s->vectors[n]; + if (level != vec->level) { + vec->level = level; + if (level) { + armv7m_nvic_set_pending(s, n); + } + } } static uint32_t nvic_readl(NVICState *s, uint32_t offset) { ARMCPU *cpu = s->cpu; uint32_t val; - int irq; switch (offset) { case 4: /* Interrupt Control Type. */ - return (s->num_irq / 32) - 1; + return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; case 0x10: /* SysTick Control and Status. */ val = s->systick.control; s->systick.control &= ~SYSTICK_COUNTFLAG; @@ -195,33 +471,29 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) case 0xd04: /* Interrupt Control State. */ /* VECTACTIVE */ val = cpu->env.v7m.exception; - if (val == 1023) { - val = 0; - } else if (val >= 32) { - val -= 16; - } /* VECTPENDING */ - if (s->gic.current_pending[0] != 1023) - val |= (s->gic.current_pending[0] << 12); - /* ISRPENDING and RETTOBASE */ - for (irq = 32; irq < s->num_irq; irq++) { - if (s->gic.irq_state[irq].pending) { - val |= (1 << 22); - break; - } - if (irq != cpu->env.v7m.exception && s->gic.irq_state[irq].active) { - val |= (1 << 11); - } + val |= (s->vectpending & 0xff) << 12; + /* ISRPENDING - set if any external IRQ is pending */ + if (nvic_isrpending(s)) { + val |= (1 << 22); + } + /* RETTOBASE - set if only one handler is active */ + if (nvic_rettobase(s)) { + val |= (1 << 11); } /* PENDSTSET */ - if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending) + if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { val |= (1 << 26); + } /* PENDSVSET */ - if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending) + if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { val |= (1 << 28); + } /* NMIPENDSET */ - if (s->gic.irq_state[ARMV7M_EXCP_NMI].pending) + if (s->vectors[ARMV7M_EXCP_NMI].pending) { val |= (1 << 31); + } + /* ISRPREEMPT not implemented */ return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase; @@ -234,20 +506,48 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) return cpu->env.v7m.ccr; case 0xd24: /* System Handler Status. */ val = 0; - if (s->gic.irq_state[ARMV7M_EXCP_MEM].active) val |= (1 << 0); - if (s->gic.irq_state[ARMV7M_EXCP_BUS].active) val |= (1 << 1); - if (s->gic.irq_state[ARMV7M_EXCP_USAGE].active) val |= (1 << 3); - if (s->gic.irq_state[ARMV7M_EXCP_SVC].active) val |= (1 << 7); - if (s->gic.irq_state[ARMV7M_EXCP_DEBUG].active) val |= (1 << 8); - if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].active) val |= (1 << 10); - if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].active) val |= (1 << 11); - if (s->gic.irq_state[ARMV7M_EXCP_USAGE].pending) val |= (1 << 12); - if (s->gic.irq_state[ARMV7M_EXCP_MEM].pending) val |= (1 << 13); - if (s->gic.irq_state[ARMV7M_EXCP_BUS].pending) val |= (1 << 14); - if (s->gic.irq_state[ARMV7M_EXCP_SVC].pending) val |= (1 << 15); - if (s->gic.irq_state[ARMV7M_EXCP_MEM].enabled) val |= (1 << 16); - if (s->gic.irq_state[ARMV7M_EXCP_BUS].enabled) val |= (1 << 17); - if (s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled) val |= (1 << 18); + if (s->vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (s->vectors[ARMV7M_EXCP_BUS].active) { + val |= (1 << 1); + } + if (s->vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->vectors[ARMV7M_EXCP_DEBUG].active) { + val |= (1 << 8); + } + if (s->vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->vectors[ARMV7M_EXCP_BUS].pending) { + val |= (1 << 14); + } + if (s->vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->vectors[ARMV7M_EXCP_BUS].enabled) { + val |= (1 << 17); + } + if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } return val; case 0xd28: /* Configurable Fault Status. */ return cpu->env.v7m.cfsr; @@ -341,14 +641,12 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) if (value & (1 << 28)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV); } else if (value & (1 << 27)) { - s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending = 0; - gic_update(&s->gic); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV); } if (value & (1 << 26)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); } else if (value & (1 << 25)) { - s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending = 0; - gic_update(&s->gic); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK); } break; case 0xd08: /* Vector Table Offset. */ @@ -366,6 +664,7 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) qemu_log_mask(LOG_UNIMP, "AIRCR system reset unimplemented\n"); } s->prigroup = extract32(value, 8, 3); + nvic_irq_update(s); } break; case 0xd10: /* System Control. */ @@ -386,9 +685,10 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) case 0xd24: /* System Handler Control. */ /* TODO: Real hardware allows you to set/clear the active bits under some circumstances. We don't implement this. */ - s->gic.irq_state[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; - s->gic.irq_state[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; - s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; + s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; + nvic_irq_update(s); break; case 0xd28: /* Configurable Fault Status. */ cpu->env.v7m.cfsr &= ~value; /* W1C */ @@ -410,13 +710,16 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) "NVIC: Aux fault status registers unimplemented\n"); break; case 0xf00: /* Software Triggered Interrupt Register */ + { /* user mode can only write to STIR if CCR.USERSETMPEND permits it */ - if ((value & 0x1ff) < s->num_irq && + int excnum = (value & 0x1ff) + NVIC_FIRST_IRQ; + if (excnum < s->num_irq && (arm_current_el(&cpu->env) || (cpu->env.v7m.ccr & R_V7M_CCR_USERSETMPEND_MASK))) { - gic_set_pending_private(&s->gic, 0, value & 0x1ff); + armv7m_nvic_set_pending(s, excnum); } break; + } default: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad write offset 0x%x\n", offset); @@ -428,28 +731,80 @@ static uint64_t nvic_sysreg_read(void *opaque, hwaddr addr, { NVICState *s = (NVICState *)opaque; uint32_t offset = addr; - int i; + unsigned i, startvec, end; uint32_t val; switch (offset) { + /* reads of set and clear both return the status */ + case 0x100 ... 0x13f: /* NVIC Set enable */ + offset += 0x80; + /* fall through */ + case 0x180 ... 0x1bf: /* NVIC Clear enable */ + val = 0; + startvec = offset - 0x180 + NVIC_FIRST_IRQ; /* vector # */ + + for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { + if (s->vectors[startvec + i].enabled) { + val |= (1 << i); + } + } + break; + case 0x200 ... 0x23f: /* NVIC Set pend */ + offset += 0x80; + /* fall through */ + case 0x280 ... 0x2bf: /* NVIC Clear pend */ + val = 0; + startvec = offset - 0x280 + NVIC_FIRST_IRQ; /* vector # */ + for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { + if (s->vectors[startvec + i].pending) { + val |= (1 << i); + } + } + break; + case 0x300 ... 0x33f: /* NVIC Active */ + val = 0; + startvec = offset - 0x300 + NVIC_FIRST_IRQ; /* vector # */ + + for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { + if (s->vectors[startvec + i].active) { + val |= (1 << i); + } + } + break; + case 0x400 ... 0x5ef: /* NVIC Priority */ + val = 0; + startvec = offset - 0x400 + NVIC_FIRST_IRQ; /* vector # */ + + for (i = 0; i < size && startvec + i < s->num_irq; i++) { + val |= s->vectors[startvec + i].prio << (8 * i); + } + break; case 0xd18 ... 0xd23: /* System Handler Priority. */ val = 0; for (i = 0; i < size; i++) { - val |= s->gic.priority1[(offset - 0xd14) + i][0] << (i * 8); + val |= s->vectors[(offset - 0xd14) + i].prio << (i * 8); } - return val; + break; case 0xfe0 ... 0xfff: /* ID. */ if (offset & 3) { - return 0; + val = 0; + } else { + val = nvic_id[(offset - 0xfe0) >> 2]; + } + break; + default: + if (size == 4) { + val = nvic_readl(s, offset); + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "NVIC: Bad read of size %d at offset 0x%x\n", + size, offset); + val = 0; } - return nvic_id[(offset - 0xfe0) >> 2]; - } - if (size == 4) { - return nvic_readl(s, offset); } - qemu_log_mask(LOG_GUEST_ERROR, - "NVIC: Bad read of size %d at offset 0x%x\n", size, offset); - return 0; + + trace_nvic_sysreg_read(addr, val, size); + return val; } static void nvic_sysreg_write(void *opaque, hwaddr addr, @@ -457,15 +812,59 @@ static void nvic_sysreg_write(void *opaque, hwaddr addr, { NVICState *s = (NVICState *)opaque; uint32_t offset = addr; - int i; + unsigned i, startvec, end; + unsigned setval = 0; + + trace_nvic_sysreg_write(addr, value, size); switch (offset) { + case 0x100 ... 0x13f: /* NVIC Set enable */ + offset += 0x80; + setval = 1; + /* fall through */ + case 0x180 ... 0x1bf: /* NVIC Clear enable */ + startvec = 8 * (offset - 0x180) + NVIC_FIRST_IRQ; + + for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { + if (value & (1 << i)) { + s->vectors[startvec + i].enabled = setval; + } + } + nvic_irq_update(s); + return; + case 0x200 ... 0x23f: /* NVIC Set pend */ + /* the special logic in armv7m_nvic_set_pending() + * is not needed since IRQs are never escalated + */ + offset += 0x80; + setval = 1; + /* fall through */ + case 0x280 ... 0x2bf: /* NVIC Clear pend */ + startvec = 8 * (offset - 0x280) + NVIC_FIRST_IRQ; /* vector # */ + + for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { + if (value & (1 << i)) { + s->vectors[startvec + i].pending = setval; + } + } + nvic_irq_update(s); + return; + case 0x300 ... 0x33f: /* NVIC Active */ + return; /* R/O */ + case 0x400 ... 0x5ef: /* NVIC Priority */ + startvec = 8 * (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ + + for (i = 0; i < size && startvec + i < s->num_irq; i++) { + set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + } + nvic_irq_update(s); + return; case 0xd18 ... 0xd23: /* System Handler Priority. */ for (i = 0; i < size; i++) { - s->gic.priority1[(offset - 0xd14) + i][0] = - (value >> (i * 8)) & 0xff; + unsigned hdlidx = (offset - 0xd14) + i; + set_prio(s, hdlidx, (value >> (i * 8)) & 0xff); } - gic_update(&s->gic); + nvic_irq_update(s); return; } if (size == 4) { @@ -482,11 +881,50 @@ static const MemoryRegionOps nvic_sysreg_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +static int nvic_post_load(void *opaque, int version_id) +{ + NVICState *s = opaque; + unsigned i; + + /* Check for out of range priority settings */ + if (s->vectors[ARMV7M_EXCP_RESET].prio != -3 || + s->vectors[ARMV7M_EXCP_NMI].prio != -2 || + s->vectors[ARMV7M_EXCP_HARD].prio != -1) { + return 1; + } + for (i = ARMV7M_EXCP_MEM; i < s->num_irq; i++) { + if (s->vectors[i].prio & ~0xff) { + return 1; + } + } + + nvic_recompute_state(s); + + return 0; +} + +static const VMStateDescription vmstate_VecInfo = { + .name = "armv7m_nvic_info", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_INT16(prio, VecInfo), + VMSTATE_UINT8(enabled, VecInfo), + VMSTATE_UINT8(pending, VecInfo), + VMSTATE_UINT8(active, VecInfo), + VMSTATE_UINT8(level, VecInfo), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, + .post_load = &nvic_post_load, .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, + vmstate_VecInfo, VecInfo), VMSTATE_UINT32(systick.control, NVICState), VMSTATE_UINT32(systick.reload, NVICState), VMSTATE_INT64(systick.tick, NVICState), @@ -496,48 +934,72 @@ static const VMStateDescription vmstate_nvic = { } }; +static Property props_nvic[] = { + /* Number of external IRQ lines (so excluding the 16 internal exceptions) */ + DEFINE_PROP_UINT32("num-irq", NVICState, num_irq, 64), + DEFINE_PROP_END_OF_LIST() +}; + static void armv7m_nvic_reset(DeviceState *dev) { NVICState *s = NVIC(dev); - NVICClass *nc = NVIC_GET_CLASS(s); - nc->parent_reset(dev); - /* Common GIC reset resets to disabled; the NVIC doesn't have - * per-CPU interfaces so mark our non-existent CPU interface - * as enabled by default, and with a priority mask which allows - * all interrupts through. + + s->vectors[ARMV7M_EXCP_NMI].enabled = 1; + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; + /* MEM, BUS, and USAGE are enabled through + * the System Handler Control register */ - s->gic.cpu_ctlr[0] = GICC_CTLR_EN_GRP0; - s->gic.priority_mask[0] = 0x100; - /* The NVIC as a whole is always enabled. */ - s->gic.ctlr = 1; + s->vectors[ARMV7M_EXCP_SVC].enabled = 1; + s->vectors[ARMV7M_EXCP_DEBUG].enabled = 1; + s->vectors[ARMV7M_EXCP_PENDSV].enabled = 1; + s->vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; + + s->vectors[ARMV7M_EXCP_RESET].prio = -3; + s->vectors[ARMV7M_EXCP_NMI].prio = -2; + s->vectors[ARMV7M_EXCP_HARD].prio = -1; + + /* Strictly speaking the reset handler should be enabled. + * However, we don't simulate soft resets through the NVIC, + * and the reset vector should never be pended. + * So we leave it disabled to catch logic errors. + */ + + s->exception_prio = NVIC_NOEXC_PRIO; + s->vectpending = 0; + systick_reset(s); } static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); - NVICClass *nc = NVIC_GET_CLASS(s); - Error *local_err = NULL; s->cpu = ARM_CPU(qemu_get_cpu(0)); assert(s->cpu); - /* The NVIC always has only one CPU */ - s->gic.num_cpu = 1; - /* Tell the common code we're an NVIC */ - s->gic.revision = 0xffffffff; - s->num_irq = s->gic.num_irq; - nc->parent_realize(dev, &local_err); - if (local_err) { - error_propagate(errp, local_err); + + if (s->num_irq > NVIC_MAX_IRQ) { + error_setg(errp, "num-irq %d exceeds NVIC maximum", s->num_irq); return; } - gic_init_irqs_and_distributor(&s->gic); - /* The NVIC and system controller register area looks like this: - * 0..0xff : system control registers, including systick - * 0x100..0xcff : GIC-like registers - * 0xd00..0xfff : system control registers - * We use overlaying to put the GIC like registers - * over the top of the system control register region. + + qdev_init_gpio_in(dev, set_irq_level, s->num_irq); + + /* include space for internal exception vectors */ + s->num_irq += NVIC_FIRST_IRQ; + + /* The NVIC and System Control Space (SCS) starts at 0xe000e000 + * and looks like this: + * 0x004 - ICTR + * 0x010 - 0x1c - systick + * 0x100..0x7ec - NVIC + * 0x7f0..0xcff - Reserved + * 0xd00..0xd3c - SCS registers + * 0xd40..0xeff - Reserved or Not implemented + * 0xf00 - STIR + * + * At the moment there is only one thing in the container region, + * but we leave it in place to allow us to pull systick out into + * its own device object later. */ memory_region_init(&s->container, OBJECT(s), "nvic", 0x1000); /* The system register region goes at the bottom of the priority @@ -546,14 +1008,7 @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); - /* Alias the GIC region so we can get only the section of it - * we need, and layer it on top of the system register region. - */ - memory_region_init_alias(&s->gic_iomem_alias, OBJECT(s), - "nvic-gic", &s->gic.iomem, - 0x100, 0xc00); - memory_region_add_subregion_overlap(&s->container, 0x100, - &s->gic_iomem_alias, 1); + /* Map the whole thing into system memory at the location required * by the v7M architecture. */ @@ -569,36 +1024,31 @@ static void armv7m_nvic_instance_init(Object *obj) * any user-specified property setting, so just modify the * value in the GICState struct. */ - GICState *s = ARM_GIC_COMMON(obj); DeviceState *dev = DEVICE(obj); NVICState *nvic = NVIC(obj); - /* The ARM v7m may have anything from 0 to 496 external interrupt - * IRQ lines. We default to 64. Other boards may differ and should - * set the num-irq property appropriately. - */ - s->num_irq = 64; + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + sysbus_init_irq(sbd, &nvic->excpout); qdev_init_gpio_out_named(dev, &nvic->sysresetreq, "SYSRESETREQ", 1); } static void armv7m_nvic_class_init(ObjectClass *klass, void *data) { - NVICClass *nc = NVIC_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); - nc->parent_reset = dc->reset; - nc->parent_realize = dc->realize; dc->vmsd = &vmstate_nvic; + dc->props = props_nvic; dc->reset = armv7m_nvic_reset; dc->realize = armv7m_nvic_realize; } static const TypeInfo armv7m_nvic_info = { .name = TYPE_NVIC, - .parent = TYPE_ARM_GIC_COMMON, + .parent = TYPE_SYS_BUS_DEVICE, .instance_init = armv7m_nvic_instance_init, .instance_size = sizeof(NVICState), .class_init = armv7m_nvic_class_init, - .class_size = sizeof(NVICClass), + .class_size = sizeof(SysBusDeviceClass), }; static void armv7m_nvic_register_types(void) diff --git a/hw/intc/trace-events b/hw/intc/trace-events index 39a538d048..729c1288f1 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -161,3 +161,18 @@ gicv3_redist_write(uint32_t cpu, uint64_t offset, uint64_t data, unsigned size, gicv3_redist_badwrite(uint32_t cpu, uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 redistributor %x write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d: error" gicv3_redist_set_irq(uint32_t cpu, int irq, int level) "GICv3 redistributor %x interrupt %d level changed to %d" gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor %x pending SGI %d" + +# hw/intc/armv7m_nvic.c +nvic_recompute_state(int vectpending, int exception_prio) "NVIC state recomputed: vectpending %d exception_prio %d" +nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" +nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" +nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" +nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" +nvic_set_pending(int irq, int en, int prio) "NVIC set pending irq %d (enabled: %d priority %d)" +nvic_clear_pending(int irq, int en, int prio) "NVIC clear pending irq %d (enabled: %d priority %d)" +nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" +nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" +nvic_complete_irq(int irq) "NVIC complete IRQ %d" +nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" +nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" +nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |