diff options
| -rw-r--r-- | linux-user/elfload.c | 503 | ||||
| -rw-r--r-- | linux-user/flatload.c | 6 | ||||
| -rw-r--r-- | linux-user/main.c | 23 | ||||
| -rw-r--r-- | linux-user/qemu.h | 31 |
4 files changed, 277 insertions, 286 deletions
diff --git a/linux-user/elfload.c b/linux-user/elfload.c index 619c054cc4..01a9323a63 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -11,6 +11,7 @@ #include "qemu/queue.h" #include "qemu/guest-random.h" #include "qemu/units.h" +#include "qemu/selfmap.h" #ifdef _ARCH_PPC64 #undef ARCH_DLINFO @@ -382,68 +383,30 @@ enum { /* The commpage only exists for 32 bit kernels */ -/* Return 1 if the proposed guest space is suitable for the guest. - * Return 0 if the proposed guest space isn't suitable, but another - * address space should be tried. - * Return -1 if there is no way the proposed guest space can be - * valid regardless of the base. - * The guest code may leave a page mapped and populate it if the - * address is suitable. - */ -static int init_guest_commpage(unsigned long guest_base, - unsigned long guest_size) -{ - unsigned long real_start, test_page_addr; - - /* We need to check that we can force a fault on access to the - * commpage at 0xffff0fxx - */ - test_page_addr = guest_base + (0xffff0f00 & qemu_host_page_mask); - - /* If the commpage lies within the already allocated guest space, - * then there is no way we can allocate it. - * - * You may be thinking that that this check is redundant because - * we already validated the guest size against MAX_RESERVED_VA; - * but if qemu_host_page_mask is unusually large, then - * test_page_addr may be lower. - */ - if (test_page_addr >= guest_base - && test_page_addr < (guest_base + guest_size)) { - return -1; - } +#define ARM_COMMPAGE (intptr_t)0xffff0f00u - /* Note it needs to be writeable to let us initialise it */ - real_start = (unsigned long) - mmap((void *)test_page_addr, qemu_host_page_size, - PROT_READ | PROT_WRITE, - MAP_ANONYMOUS | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); +static bool init_guest_commpage(void) +{ + void *want = g2h(ARM_COMMPAGE & -qemu_host_page_size); + void *addr = mmap(want, qemu_host_page_size, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); - /* If we can't map it then try another address */ - if (real_start == -1ul) { - return 0; + if (addr == MAP_FAILED) { + perror("Allocating guest commpage"); + exit(EXIT_FAILURE); } - - if (real_start != test_page_addr) { - /* OS didn't put the page where we asked - unmap and reject */ - munmap((void *)real_start, qemu_host_page_size); - return 0; + if (addr != want) { + return false; } - /* Leave the page mapped - * Populate it (mmap should have left it all 0'd) - */ - - /* Kernel helper versions */ - __put_user(5, (uint32_t *)g2h(0xffff0ffcul)); + /* Set kernel helper versions; rest of page is 0. */ + __put_user(5, (uint32_t *)g2h(0xffff0ffcu)); - /* Now it's populated make it RO */ - if (mprotect((void *)test_page_addr, qemu_host_page_size, PROT_READ)) { + if (mprotect(addr, qemu_host_page_size, PROT_READ)) { perror("Protecting guest commpage"); - exit(-1); + exit(EXIT_FAILURE); } - - return 1; /* All good */ + return true; } #define ELF_HWCAP get_elf_hwcap() @@ -2075,239 +2038,267 @@ static abi_ulong create_elf_tables(abi_ulong p, int argc, int envc, return sp; } -unsigned long init_guest_space(unsigned long host_start, - unsigned long host_size, - unsigned long guest_start, - bool fixed) -{ - /* In order to use host shmat, we must be able to honor SHMLBA. */ - unsigned long align = MAX(SHMLBA, qemu_host_page_size); - unsigned long current_start, aligned_start; - int flags; - - assert(host_start || host_size); - - /* If just a starting address is given, then just verify that - * address. */ - if (host_start && !host_size) { -#if defined(TARGET_ARM) && !defined(TARGET_AARCH64) - if (init_guest_commpage(host_start, host_size) != 1) { - return (unsigned long)-1; - } +#ifndef ARM_COMMPAGE +#define ARM_COMMPAGE 0 +#define init_guest_commpage() true #endif - return host_start; - } - /* Setup the initial flags and start address. */ - current_start = host_start & -align; - flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE; - if (fixed) { - flags |= MAP_FIXED; - } +static void pgb_fail_in_use(const char *image_name) +{ + error_report("%s: requires virtual address space that is in use " + "(omit the -B option or choose a different value)", + image_name); + exit(EXIT_FAILURE); +} - /* Otherwise, a non-zero size region of memory needs to be mapped - * and validated. */ +static void pgb_have_guest_base(const char *image_name, abi_ulong guest_loaddr, + abi_ulong guest_hiaddr, long align) +{ + const int flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE; + void *addr, *test; -#if defined(TARGET_ARM) && !defined(TARGET_AARCH64) - /* On 32-bit ARM, we need to map not just the usable memory, but - * also the commpage. Try to find a suitable place by allocating - * a big chunk for all of it. If host_start, then the naive - * strategy probably does good enough. - */ - if (!host_start) { - unsigned long guest_full_size, host_full_size, real_start; - - guest_full_size = - (0xffff0f00 & qemu_host_page_mask) + qemu_host_page_size; - host_full_size = guest_full_size - guest_start; - real_start = (unsigned long) - mmap(NULL, host_full_size, PROT_NONE, flags, -1, 0); - if (real_start == (unsigned long)-1) { - if (host_size < host_full_size - qemu_host_page_size) { - /* We failed to map a continous segment, but we're - * allowed to have a gap between the usable memory and - * the commpage where other things can be mapped. - * This sparseness gives us more flexibility to find - * an address range. - */ - goto naive; - } - return (unsigned long)-1; + if (!QEMU_IS_ALIGNED(guest_base, align)) { + fprintf(stderr, "Requested guest base 0x%lx does not satisfy " + "host minimum alignment (0x%lx)\n", + guest_base, align); + exit(EXIT_FAILURE); + } + + /* Sanity check the guest binary. */ + if (reserved_va) { + if (guest_hiaddr > reserved_va) { + error_report("%s: requires more than reserved virtual " + "address space (0x%" PRIx64 " > 0x%lx)", + image_name, (uint64_t)guest_hiaddr, reserved_va); + exit(EXIT_FAILURE); } - munmap((void *)real_start, host_full_size); - if (real_start & (align - 1)) { - /* The same thing again, but with extra - * so that we can shift around alignment. - */ - unsigned long real_size = host_full_size + qemu_host_page_size; - real_start = (unsigned long) - mmap(NULL, real_size, PROT_NONE, flags, -1, 0); - if (real_start == (unsigned long)-1) { - if (host_size < host_full_size - qemu_host_page_size) { - goto naive; - } - return (unsigned long)-1; - } - munmap((void *)real_start, real_size); - real_start = ROUND_UP(real_start, align); + } else { + if ((guest_hiaddr - guest_base) > ~(uintptr_t)0) { + error_report("%s: requires more virtual address space " + "than the host can provide (0x%" PRIx64 ")", + image_name, (uint64_t)guest_hiaddr - guest_base); + exit(EXIT_FAILURE); } - current_start = real_start; } - naive: -#endif - while (1) { - unsigned long real_start, real_size, aligned_size; - aligned_size = real_size = host_size; + /* + * Expand the allocation to the entire reserved_va. + * Exclude the mmap_min_addr hole. + */ + if (reserved_va) { + guest_loaddr = (guest_base >= mmap_min_addr ? 0 + : mmap_min_addr - guest_base); + guest_hiaddr = reserved_va; + } - /* Do not use mmap_find_vma here because that is limited to the - * guest address space. We are going to make the - * guest address space fit whatever we're given. - */ - real_start = (unsigned long) - mmap((void *)current_start, host_size, PROT_NONE, flags, -1, 0); - if (real_start == (unsigned long)-1) { - return (unsigned long)-1; - } + /* Reserve the address space for the binary, or reserved_va. */ + test = g2h(guest_loaddr); + addr = mmap(test, guest_hiaddr - guest_loaddr, PROT_NONE, flags, -1, 0); + if (test != addr) { + pgb_fail_in_use(image_name); + } +} - /* Check to see if the address is valid. */ - if (host_start && real_start != current_start) { - qemu_log_mask(CPU_LOG_PAGE, "invalid %lx && %lx != %lx\n", - host_start, real_start, current_start); - goto try_again; +/* Return value for guest_base, or -1 if no hole found. */ +static uintptr_t pgb_find_hole(uintptr_t guest_loaddr, uintptr_t guest_size, + long align) +{ + GSList *maps, *iter; + uintptr_t this_start, this_end, next_start, brk; + intptr_t ret = -1; + + assert(QEMU_IS_ALIGNED(guest_loaddr, align)); + + maps = read_self_maps(); + + /* Read brk after we've read the maps, which will malloc. */ + brk = (uintptr_t)sbrk(0); + + /* The first hole is before the first map entry. */ + this_start = mmap_min_addr; + + for (iter = maps; iter; + this_start = next_start, iter = g_slist_next(iter)) { + uintptr_t align_start, hole_size; + + this_end = ((MapInfo *)iter->data)->start; + next_start = ((MapInfo *)iter->data)->end; + align_start = ROUND_UP(this_start, align); + + /* Skip holes that are too small. */ + if (align_start >= this_end) { + continue; + } + hole_size = this_end - align_start; + if (hole_size < guest_size) { + continue; } - /* Ensure the address is properly aligned. */ - if (real_start & (align - 1)) { - /* Ideally, we adjust like - * - * pages: [ ][ ][ ][ ][ ] - * old: [ real ] - * [ aligned ] - * new: [ real ] - * [ aligned ] - * - * But if there is something else mapped right after it, - * then obviously it won't have room to grow, and the - * kernel will put the new larger real someplace else with - * unknown alignment (if we made it to here, then - * fixed=false). Which is why we grow real by a full page - * size, instead of by part of one; so that even if we get - * moved, we can still guarantee alignment. But this does - * mean that there is a padding of < 1 page both before - * and after the aligned range; the "after" could could - * cause problems for ARM emulation where it could butt in - * to where we need to put the commpage. - */ - munmap((void *)real_start, host_size); - real_size = aligned_size + align; - real_start = (unsigned long) - mmap((void *)real_start, real_size, PROT_NONE, flags, -1, 0); - if (real_start == (unsigned long)-1) { - return (unsigned long)-1; + /* If this hole contains brk, give ourselves some room to grow. */ + if (this_start <= brk && brk < this_end) { + hole_size -= guest_size; + if (sizeof(uintptr_t) == 8 && hole_size >= 1 * GiB) { + align_start += 1 * GiB; + } else if (hole_size >= 16 * MiB) { + align_start += 16 * MiB; + } else { + align_start = (this_end - guest_size) & -align; + if (align_start < this_start) { + continue; + } } - aligned_start = ROUND_UP(real_start, align); - } else { - aligned_start = real_start; } -#if defined(TARGET_ARM) && !defined(TARGET_AARCH64) - /* On 32-bit ARM, we need to also be able to map the commpage. */ - int valid = init_guest_commpage(aligned_start - guest_start, - aligned_size + guest_start); - if (valid == -1) { - munmap((void *)real_start, real_size); - return (unsigned long)-1; - } else if (valid == 0) { - goto try_again; + /* Record the lowest successful match. */ + if (ret < 0) { + ret = align_start - guest_loaddr; } -#endif - - /* If nothing has said `return -1` or `goto try_again` yet, - * then the address we have is good. - */ - break; - - try_again: - /* That address didn't work. Unmap and try a different one. - * The address the host picked because is typically right at - * the top of the host address space and leaves the guest with - * no usable address space. Resort to a linear search. We - * already compensated for mmap_min_addr, so this should not - * happen often. Probably means we got unlucky and host - * address space randomization put a shared library somewhere - * inconvenient. - * - * This is probably a good strategy if host_start, but is - * probably a bad strategy if not, which means we got here - * because of trouble with ARM commpage setup. - */ - if (munmap((void *)real_start, real_size) != 0) { - error_report("%s: failed to unmap %lx:%lx (%s)", __func__, - real_start, real_size, strerror(errno)); - abort(); + /* If this hole contains the identity map, select it. */ + if (align_start <= guest_loaddr && + guest_loaddr + guest_size <= this_end) { + ret = 0; } - current_start += align; - if (host_start == current_start) { - /* Theoretically possible if host doesn't have any suitably - * aligned areas. Normally the first mmap will fail. - */ - return (unsigned long)-1; + /* If this hole ends above the identity map, stop looking. */ + if (this_end >= guest_loaddr) { + break; } } + free_self_maps(maps); - qemu_log_mask(CPU_LOG_PAGE, "Reserved 0x%lx bytes of guest address space\n", host_size); - - return aligned_start; + return ret; } -static void probe_guest_base(const char *image_name, - abi_ulong loaddr, abi_ulong hiaddr) +static void pgb_static(const char *image_name, abi_ulong orig_loaddr, + abi_ulong orig_hiaddr, long align) { - /* Probe for a suitable guest base address, if the user has not set - * it explicitly, and set guest_base appropriately. - * In case of error we will print a suitable message and exit. - */ - const char *errmsg; - if (!have_guest_base && !reserved_va) { - unsigned long host_start, real_start, host_size; + uintptr_t loaddr = orig_loaddr; + uintptr_t hiaddr = orig_hiaddr; + uintptr_t addr; - /* Round addresses to page boundaries. */ - loaddr &= qemu_host_page_mask; - hiaddr = HOST_PAGE_ALIGN(hiaddr); + if (hiaddr != orig_hiaddr) { + error_report("%s: requires virtual address space that the " + "host cannot provide (0x%" PRIx64 ")", + image_name, (uint64_t)orig_hiaddr); + exit(EXIT_FAILURE); + } - if (loaddr < mmap_min_addr) { - host_start = HOST_PAGE_ALIGN(mmap_min_addr); + loaddr &= -align; + if (ARM_COMMPAGE) { + /* + * Extend the allocation to include the commpage. + * For a 64-bit host, this is just 4GiB; for a 32-bit host, + * the address arithmetic will wrap around, but the difference + * will produce the correct allocation size. + */ + if (sizeof(uintptr_t) == 8 || loaddr >= 0x80000000u) { + hiaddr = (uintptr_t)4 << 30; } else { - host_start = loaddr; - if (host_start != loaddr) { - errmsg = "Address overflow loading ELF binary"; - goto exit_errmsg; - } + loaddr = ARM_COMMPAGE & -align; } - host_size = hiaddr - loaddr; + } - /* Setup the initial guest memory space with ranges gleaned from - * the ELF image that is being loaded. + addr = pgb_find_hole(loaddr, hiaddr - loaddr, align); + if (addr == -1) { + /* + * If ARM_COMMPAGE, there *might* be a non-consecutive allocation + * that can satisfy both. But as the normal arm32 link base address + * is ~32k, and we extend down to include the commpage, making the + * overhead only ~96k, this is unlikely. */ - real_start = init_guest_space(host_start, host_size, loaddr, false); - if (real_start == (unsigned long)-1) { - errmsg = "Unable to find space for application"; - goto exit_errmsg; - } - guest_base = real_start - loaddr; + error_report("%s: Unable to allocate %#zx bytes of " + "virtual address space", image_name, + (size_t)(hiaddr - loaddr)); + exit(EXIT_FAILURE); + } + + guest_base = addr; +} + +static void pgb_dynamic(const char *image_name, long align) +{ + /* + * The executable is dynamic and does not require a fixed address. + * All we need is a commpage that satisfies align. + * If we do not need a commpage, leave guest_base == 0. + */ + if (ARM_COMMPAGE) { + uintptr_t addr, commpage; - qemu_log_mask(CPU_LOG_PAGE, "Relocating guest address space from 0x" - TARGET_ABI_FMT_lx " to 0x%lx\n", - loaddr, real_start); + /* 64-bit hosts should have used reserved_va. */ + assert(sizeof(uintptr_t) == 4); + + /* + * By putting the commpage at the first hole, that puts guest_base + * just above that, and maximises the positive guest addresses. + */ + commpage = ARM_COMMPAGE & -align; + addr = pgb_find_hole(commpage, -commpage, align); + assert(addr != -1); + guest_base = addr; } - return; +} -exit_errmsg: - fprintf(stderr, "%s: %s\n", image_name, errmsg); - exit(-1); +static void pgb_reserved_va(const char *image_name, abi_ulong guest_loaddr, + abi_ulong guest_hiaddr, long align) +{ + const int flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE; + void *addr, *test; + + if (guest_hiaddr > reserved_va) { + error_report("%s: requires more than reserved virtual " + "address space (0x%" PRIx64 " > 0x%lx)", + image_name, (uint64_t)guest_hiaddr, reserved_va); + exit(EXIT_FAILURE); + } + + /* Widen the "image" to the entire reserved address space. */ + pgb_static(image_name, 0, reserved_va, align); + + /* Reserve the memory on the host. */ + assert(guest_base != 0); + test = g2h(0); + addr = mmap(test, reserved_va, PROT_NONE, flags, -1, 0); + if (addr == MAP_FAILED) { + error_report("Unable to reserve 0x%lx bytes of virtual address " + "space for use as guest address space (check your " + "virtual memory ulimit setting or reserve less " + "using -R option)", reserved_va); + exit(EXIT_FAILURE); + } + assert(addr == test); } +void probe_guest_base(const char *image_name, abi_ulong guest_loaddr, + abi_ulong guest_hiaddr) +{ + /* In order to use host shmat, we must be able to honor SHMLBA. */ + uintptr_t align = MAX(SHMLBA, qemu_host_page_size); + + if (have_guest_base) { + pgb_have_guest_base(image_name, guest_loaddr, guest_hiaddr, align); + } else if (reserved_va) { + pgb_reserved_va(image_name, guest_loaddr, guest_hiaddr, align); + } else if (guest_loaddr) { + pgb_static(image_name, guest_loaddr, guest_hiaddr, align); + } else { + pgb_dynamic(image_name, align); + } + + /* Reserve and initialize the commpage. */ + if (!init_guest_commpage()) { + /* + * With have_guest_base, the user has selected the address and + * we are trying to work with that. Otherwise, we have selected + * free space and init_guest_commpage must succeeded. + */ + assert(have_guest_base); + pgb_fail_in_use(image_name); + } + + assert(QEMU_IS_ALIGNED(guest_base, align)); + qemu_log_mask(CPU_LOG_PAGE, "Locating guest address space " + "@ 0x%" PRIx64 "\n", (uint64_t)guest_base); +} /* Load an ELF image into the address space. @@ -2399,6 +2390,12 @@ static void load_elf_image(const char *image_name, int image_fd, * MMAP_MIN_ADDR or the QEMU application itself. */ probe_guest_base(image_name, loaddr, hiaddr); + } else { + /* + * The binary is dynamic, but we still need to + * select guest_base. In this case we pass a size. + */ + probe_guest_base(image_name, 0, hiaddr - loaddr); } } diff --git a/linux-user/flatload.c b/linux-user/flatload.c index 66901f39cc..8fb448f0bf 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -442,6 +442,12 @@ static int load_flat_file(struct linux_binprm * bprm, indx_len = (indx_len + 15) & ~(abi_ulong)15; /* + * Alloate the address space. + */ + probe_guest_base(bprm->filename, 0, + text_len + data_len + extra + indx_len); + + /* * there are a couple of cases here, the separate code/data * case, and then the fully copied to RAM case which lumps * it all together. diff --git a/linux-user/main.c b/linux-user/main.c index 2cd443237d..e18c1fb952 100644 --- a/linux-user/main.c +++ b/linux-user/main.c @@ -24,6 +24,7 @@ #include "qemu-version.h" #include <sys/syscall.h> #include <sys/resource.h> +#include <sys/shm.h> #include "qapi/error.h" #include "qemu.h" @@ -748,28 +749,6 @@ int main(int argc, char **argv, char **envp) envlist_free(envlist); /* - * Now that page sizes are configured in tcg_exec_init() we can do - * proper page alignment for guest_base. - */ - guest_base = HOST_PAGE_ALIGN(guest_base); - - if (reserved_va || have_guest_base) { - guest_base = init_guest_space(guest_base, reserved_va, 0, - have_guest_base); - if (guest_base == (unsigned long)-1) { - fprintf(stderr, "Unable to reserve 0x%lx bytes of virtual address " - "space for use as guest address space (check your virtual " - "memory ulimit setting or reserve less using -R option)\n", - reserved_va); - exit(EXIT_FAILURE); - } - - if (reserved_va) { - mmap_next_start = reserved_va; - } - } - - /* * Read in mmap_min_addr kernel parameter. This value is used * When loading the ELF image to determine whether guest_base * is needed. It is also used in mmap_find_vma. diff --git a/linux-user/qemu.h b/linux-user/qemu.h index 792c74290f..ce902f5132 100644 --- a/linux-user/qemu.h +++ b/linux-user/qemu.h @@ -219,18 +219,27 @@ void init_qemu_uname_release(void); void fork_start(void); void fork_end(int child); -/* Creates the initial guest address space in the host memory space using - * the given host start address hint and size. The guest_start parameter - * specifies the start address of the guest space. guest_base will be the - * difference between the host start address computed by this function and - * guest_start. If fixed is specified, then the mapped address space must - * start at host_start. The real start address of the mapped memory space is - * returned or -1 if there was an error. +/** + * probe_guest_base: + * @image_name: the executable being loaded + * @loaddr: the lowest fixed address in the executable + * @hiaddr: the highest fixed address in the executable + * + * Creates the initial guest address space in the host memory space. + * + * If @loaddr == 0, then no address in the executable is fixed, + * i.e. it is fully relocatable. In that case @hiaddr is the size + * of the executable. + * + * This function will not return if a valid value for guest_base + * cannot be chosen. On return, the executable loader can expect + * + * target_mmap(loaddr, hiaddr - loaddr, ...) + * + * to succeed. */ -unsigned long init_guest_space(unsigned long host_start, - unsigned long host_size, - unsigned long guest_start, - bool fixed); +void probe_guest_base(const char *image_name, + abi_ulong loaddr, abi_ulong hiaddr); #include "qemu/log.h" |