diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/system/arm/max78000.rst | 37 | ||||
| -rw-r--r-- | docs/system/arm/virt.rst | 9 | ||||
| -rw-r--r-- | docs/system/devices/cxl.rst | 11 | ||||
| -rw-r--r-- | docs/system/target-arm.rst | 1 |
4 files changed, 58 insertions, 0 deletions
diff --git a/docs/system/arm/max78000.rst b/docs/system/arm/max78000.rst new file mode 100644 index 0000000000..3d95011fef --- /dev/null +++ b/docs/system/arm/max78000.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Analog Devices max78000 board (``max78000fthr``) +================================================ + +The max78000 is a Cortex-M4 based SOC with a RISC-V coprocessor. The RISC-V coprocessor is not supported. + +Supported devices +----------------- + + * Instruction Cache Controller + * UART + * Global Control Register + * True Random Number Generator + * AES + +Notable unsupported devices +--------------------------- + + * I2C + * CNN + * CRC + * SPI + +Boot options +------------ + +The max78000 can be started using the ``-kernel`` option to load a +firmware at address 0 as the ROM. As the ROM normally jumps to software loaded +from the internal flash at address 0x10000000, loading your program there is +generally advisable. If you don't have a copy of the ROM, the interrupt +vector table from user firmware will do. +Example: + +.. code-block:: bash + + $ qemu-system-arm -machine max78000fthr -kernel max78000.bin -device loader,file=max78000.bin,addr=0x10000000 diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index 6a719b9586..10cbffc8a7 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -31,6 +31,7 @@ Supported devices The virt board supports: - PCI/PCIe devices +- CXL Fixed memory windows, root bridges and devices. - Flash memory - Either one or two PL011 UARTs for the NonSecure World - An RTC @@ -189,6 +190,14 @@ ras acpi Set ``on``/``off``/``auto`` to enable/disable ACPI. +cxl + Set ``on``/``off`` to enable/disable CXL. More details in + :doc:`../devices/cxl`. The default is off. + +cxl-fmw + Array of CXL fixed memory windows describing fixed address routing to + target CXL host bridges. See :doc:`../devices/cxl`. + dtb-randomness Set ``on``/``off`` to pass random seeds via the guest DTB rng-seed and kaslr-seed nodes (in both "/chosen" and diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst index e307caf3f8..ca15a0da1c 100644 --- a/docs/system/devices/cxl.rst +++ b/docs/system/devices/cxl.rst @@ -384,6 +384,17 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave:: -device cxl-type3,bus=swport3,persistent-memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,sn=0x4 \ -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k +A simple arm/virt example featuring a single direct connected CXL Type 3 +Volatile Memory device:: + + qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8g,slots=4 -cpu max -smp 4 \ + ... + -object memory-backend-ram,id=vmem0,share=on,size=256M \ + -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \ + -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \ + -device cxl-type3,bus=root_port13,volatile-memdev=vmem0,id=cxl-vmem0 \ + -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G + Deprecations ------------ diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index b96a05a920..a96d1867df 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -71,6 +71,7 @@ Board-specific documentation .. toctree:: :maxdepth: 1 + arm/max78000 arm/integratorcp arm/mps2 arm/musca |