diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/about/build-platforms.rst | 10 | ||||
| -rw-r--r-- | docs/about/deprecated.rst | 11 | ||||
| -rw-r--r-- | docs/block-replication.txt | 4 | ||||
| -rw-r--r-- | docs/devel/qapi-code-gen.rst | 29 | ||||
| -rw-r--r-- | docs/interop/bitmaps.rst | 285 | ||||
| -rw-r--r-- | docs/interop/live-block-operations.rst | 47 |
6 files changed, 280 insertions, 106 deletions
diff --git a/docs/about/build-platforms.rst b/docs/about/build-platforms.rst index bcb1549721..c29a4b8fe6 100644 --- a/docs/about/build-platforms.rst +++ b/docs/about/build-platforms.rst @@ -54,10 +54,12 @@ Those hosts are officially supported, with various accelerators: * - x86 - hax, hvf (64 bit only), kvm, nvmm, tcg, whpx (64 bit only), xen -Other host architectures are not supported. It is possible to build QEMU on an -unsupported host architecture using the configure ``--enable-tcg-interpreter`` -option to enable the experimental TCI support, but note that this is very slow -and is not recommended. +Other host architectures are not supported. It is possible to build QEMU system +emulation on an unsupported host architecture using the configure +``--enable-tcg-interpreter`` option to enable the TCI support, but note that +this is very slow and is not recommended for normal use. QEMU user emulation +requires host-specific support for signal handling, therefore TCI won't help +on unsupported host architectures. Non-supported architectures may be removed in the future following the :ref:`deprecation process<Deprecated features>`. diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 5e514fb443..600031210d 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -239,6 +239,17 @@ single ``bitmap``, the new ``block-export-add`` uses a list of ``bitmaps``. Member ``values`` in return value elements with meta-type ``enum`` is deprecated. Use ``members`` instead. +``drive-backup`` (since 6.2) +'''''''''''''''''''''''''''' + +Use ``blockdev-backup`` in combination with ``blockdev-add`` instead. +This change primarily separates the creation/opening process of the backup +target with explicit, separate steps. ``blockdev-backup`` uses mostly the +same arguments as ``drive-backup``, except the ``format`` and ``mode`` +options are removed in favor of using explicit ``blockdev-create`` and +``blockdev-add`` calls. See :doc:`/interop/live-block-operations` for +details. + System accelerators ------------------- diff --git a/docs/block-replication.txt b/docs/block-replication.txt index 108e9166a8..59eb2b33b3 100644 --- a/docs/block-replication.txt +++ b/docs/block-replication.txt @@ -79,7 +79,7 @@ Primary | || Secondary disk <--------- hidden-disk 5 <--------- || | | || | | || '-------------------------' - || drive-backup sync=none 6 + || blockdev-backup sync=none 6 1) The disk on the primary is represented by a block device with two children, providing replication between a primary disk and the host that @@ -101,7 +101,7 @@ should support bdrv_make_empty() and backing file. that is modified by the primary VM. It should also start as an empty disk, and the driver supports bdrv_make_empty() and backing file. -6) The drive-backup job (sync=none) is run to allow hidden-disk to buffer +6) The blockdev-backup job (sync=none) is run to allow hidden-disk to buffer any state that would otherwise be lost by the speculative write-through of the NBD server into the secondary disk. So before block replication, the primary disk and secondary disk should contain the same data. diff --git a/docs/devel/qapi-code-gen.rst b/docs/devel/qapi-code-gen.rst index 38f2d7aad3..a3b5473089 100644 --- a/docs/devel/qapi-code-gen.rst +++ b/docs/devel/qapi-code-gen.rst @@ -956,15 +956,16 @@ definition must have documentation. Definition documentation starts with a line naming the definition, followed by an optional overview, a description of each argument (for commands and events), member (for structs and unions), branch (for -alternates), or value (for enums), and finally optional tagged -sections. +alternates), or value (for enums), a description of each feature (if +any), and finally optional tagged sections. -Descriptions of arguments can span multiple lines. The description -text can start on the line following the '\@argname:', in which case it -must not be indented at all. It can also start on the same line as -the '\@argname:'. In this case if it spans multiple lines then second -and subsequent lines must be indented to line up with the first -character of the first line of the description:: +The description of an argument or feature 'name' starts with +'\@name:'. The description text can start on the line following the +'\@name:', in which case it must not be indented at all. It can also +start on the same line as the '\@name:'. In this case if it spans +multiple lines then second and subsequent lines must be indented to +line up with the first character of the first line of the +description:: # @argone: # This is a two line description @@ -986,6 +987,12 @@ The number of spaces between the ':' and the text is not significant. Extensions added after the definition was first released carry a '(since x.y.z)' comment. +The feature descriptions must be preceded by a line "Features:", like +this:: + + # Features: + # @feature: Description text + A tagged section starts with one of the following words: "Note:"/"Notes:", "Since:", "Example"/"Examples", "Returns:", "TODO:". The section ends with the start of a new section. @@ -1000,12 +1007,6 @@ multiline argument descriptions. A 'Since: x.y.z' tagged section lists the release that introduced the definition. -The text of a section can start on a new line, in -which case it must not be indented at all. It can also start -on the same line as the 'Note:', 'Returns:', etc tag. In this -case if it spans multiple lines then second and subsequent -lines must be indented to match the first. - An 'Example' or 'Examples' section is automatically rendered entirely as literal fixed-width text. In other sections, the text is formatted, and rST markup can be used. diff --git a/docs/interop/bitmaps.rst b/docs/interop/bitmaps.rst index 059ad67929..1de46febdc 100644 --- a/docs/interop/bitmaps.rst +++ b/docs/interop/bitmaps.rst @@ -539,12 +539,11 @@ other partial disk images on top of a base image to reconstruct a full backup from the point in time at which the incremental backup was issued. The "Push Model" here references the fact that QEMU is "pushing" the modified -blocks out to a destination. We will be using the `drive-backup -<qemu-qmp-ref.html#index-drive_002dbackup>`_ and `blockdev-backup -<qemu-qmp-ref.html#index-blockdev_002dbackup>`_ QMP commands to create both +blocks out to a destination. We will be using the `blockdev-backup +<qemu-qmp-ref.html#index-blockdev_002dbackup>`_ QMP command to create both full and incremental backups. -Both of these commands are jobs, which have their own QMP API for querying and +The command is a background job, which has its own QMP API for querying and management documented in `Background jobs <qemu-qmp-ref.html#Background-jobs>`_. @@ -557,6 +556,10 @@ create a new incremental backup chain attached to a drive. This example creates a new, full backup of "drive0" and accompanies it with a new, empty bitmap that records writes from this point in time forward. +The target can be created with the help of `blockdev-add +<qemu-qmp-ref.html#index-blockdev_002dadd>`_ or `blockdev-create +<qemu-qmp-ref.html#index-blockdev_002dcreate>`_ command. + .. note:: Any new writes that happen after this command is issued, even while the backup job runs, will be written locally and not to the backup destination. These writes will be recorded in the bitmap @@ -576,12 +579,11 @@ new, empty bitmap that records writes from this point in time forward. } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive0", - "target": "/path/to/drive0.full.qcow2", - "sync": "full", - "format": "qcow2" + "target": "target0", + "sync": "full" } } ] @@ -664,12 +666,11 @@ use a transaction to reset the bitmap while making a new full backup: } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive0", - "target": "/path/to/drive0.new_full.qcow2", - "sync": "full", - "format": "qcow2" + "target": "target0", + "sync": "full" } } ] @@ -728,19 +729,35 @@ Example: First Incremental Backup $ qemu-img create -f qcow2 drive0.inc0.qcow2 \ -b drive0.full.qcow2 -F qcow2 +#. Add target block node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc0.qcow2" + } + } + } + + <- { "return": {} } + #. Issue an incremental backup command: .. code-block:: QMP -> { - "execute": "drive-backup", + "execute": "blockdev-backup", "arguments": { "device": "drive0", "bitmap": "bitmap0", - "target": "drive0.inc0.qcow2", - "format": "qcow2", - "sync": "incremental", - "mode": "existing" + "target": "target0", + "sync": "incremental" } } @@ -785,20 +802,36 @@ Example: Second Incremental Backup $ qemu-img create -f qcow2 drive0.inc1.qcow2 \ -b drive0.inc0.qcow2 -F qcow2 +#. Add target block node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc1.qcow2" + } + } + } + + <- { "return": {} } + #. Issue a new incremental backup command. The only difference here is that we have changed the target image below. .. code-block:: QMP -> { - "execute": "drive-backup", + "execute": "blockdev-backup", "arguments": { "device": "drive0", "bitmap": "bitmap0", - "target": "drive0.inc1.qcow2", - "format": "qcow2", - "sync": "incremental", - "mode": "existing" + "target": "target0", + "sync": "incremental" } } @@ -866,20 +899,36 @@ image: file for you, but you lose control over format options like compatibility and preallocation presets. +#. Add target block node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc2.qcow2" + } + } + } + + <- { "return": {} } + #. Issue a new incremental backup command. Apart from the new destination image, there is no difference from the last two examples. .. code-block:: QMP -> { - "execute": "drive-backup", + "execute": "blockdev-backup", "arguments": { "device": "drive0", "bitmap": "bitmap0", - "target": "drive0.inc2.qcow2", - "format": "qcow2", - "sync": "incremental", - "mode": "existing" + "target": "target0", + "sync": "incremental" } } @@ -930,6 +979,38 @@ point in time. $ qemu-img create -f qcow2 drive0.full.qcow2 64G $ qemu-img create -f qcow2 drive1.full.qcow2 64G +#. Add target block nodes: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.full.qcow2" + } + } + } + + <- { "return": {} } + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target1", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive1.full.qcow2" + } + } + } + + <- { "return": {} } + #. Create a full (anchor) backup for each drive, with accompanying bitmaps: .. code-block:: QMP @@ -953,21 +1034,19 @@ point in time. } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive0", - "target": "/path/to/drive0.full.qcow2", - "sync": "full", - "format": "qcow2" + "target": "target0", + "sync": "full" } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive1", - "target": "/path/to/drive1.full.qcow2", - "sync": "full", - "format": "qcow2" + "target": "target1", + "sync": "full" } } ] @@ -1016,6 +1095,38 @@ point in time. $ qemu-img create -f qcow2 drive1.inc0.qcow2 \ -b drive1.full.qcow2 -F qcow2 +#. Add target block nodes: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc0.qcow2" + } + } + } + + <- { "return": {} } + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target1", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive1.inc0.qcow2" + } + } + } + + <- { "return": {} } + #. Issue a multi-drive incremental push backup transaction: .. code-block:: QMP @@ -1025,25 +1136,21 @@ point in time. "arguments": { "actions": [ { - "type": "drive-backup", + "type": "blockev-backup", "data": { "device": "drive0", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive0.inc0.qcow2" + "target": "target0" } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive1", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive1.inc0.qcow2" + "target": "target1" } }, ] @@ -1119,19 +1226,35 @@ described above. This example demonstrates the single-job failure case: $ qemu-img create -f qcow2 drive0.inc0.qcow2 \ -b drive0.full.qcow2 -F qcow2 +#. Add target block node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc0.qcow2" + } + } + } + + <- { "return": {} } + #. Attempt to create an incremental backup via QMP: .. code-block:: QMP -> { - "execute": "drive-backup", + "execute": "blockdev-backup", "arguments": { "device": "drive0", "bitmap": "bitmap0", - "target": "drive0.inc0.qcow2", - "format": "qcow2", - "sync": "incremental", - "mode": "existing" + "target": "target0", + "sync": "incremental" } } @@ -1164,6 +1287,19 @@ described above. This example demonstrates the single-job failure case: "event": "BLOCK_JOB_COMPLETED" } +#. Remove target node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-del", + "arguments": { + "node-name": "target0", + } + } + + <- { "return": {} } + #. Delete the failed image, and re-create it. .. code:: bash @@ -1172,20 +1308,36 @@ described above. This example demonstrates the single-job failure case: $ qemu-img create -f qcow2 drive0.inc0.qcow2 \ -b drive0.full.qcow2 -F qcow2 +#. Add target block node: + + .. code-block:: QMP + + -> { + "execute": "blockdev-add", + "arguments": { + "node-name": "target0", + "driver": "qcow2", + "file": { + "driver": "file", + "filename": "drive0.inc0.qcow2" + } + } + } + + <- { "return": {} } + #. Retry the command after fixing the underlying problem, such as freeing up space on the backup volume: .. code-block:: QMP -> { - "execute": "drive-backup", + "execute": "blockdev-backup", "arguments": { "device": "drive0", "bitmap": "bitmap0", - "target": "drive0.inc0.qcow2", - "format": "qcow2", - "sync": "incremental", - "mode": "existing" + "target": "target0", + "sync": "incremental" } } @@ -1210,7 +1362,8 @@ described above. This example demonstrates the single-job failure case: Example: Partial Transactional Failures ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -QMP commands like `drive-backup <qemu-qmp-ref.html#index-drive_002dbackup>`_ +QMP commands like `blockdev-backup +<qemu-qmp-ref.html#index-blockdev_002dbackup>`_ conceptually only start a job, and so transactions containing these commands may succeed even if the job it created later fails. This might have surprising interactions with notions of how a "transaction" ought to behave. @@ -1240,25 +1393,21 @@ and one succeeds: "arguments": { "actions": [ { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive0", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive0.inc0.qcow2" + "target": "target0" } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive1", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive1.inc0.qcow2" + "target": "target1" } }] } @@ -1375,25 +1524,21 @@ applied: }, "actions": [ { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive0", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive0.inc0.qcow2" + "target": "target0" } }, { - "type": "drive-backup", + "type": "blockdev-backup", "data": { "device": "drive1", "bitmap": "bitmap0", - "format": "qcow2", - "mode": "existing", "sync": "incremental", - "target": "drive1.inc0.qcow2" + "target": "target1" } }] } diff --git a/docs/interop/live-block-operations.rst b/docs/interop/live-block-operations.rst index 814c29bbe1..39e62c9915 100644 --- a/docs/interop/live-block-operations.rst +++ b/docs/interop/live-block-operations.rst @@ -116,8 +116,8 @@ QEMU block layer supports. (3) ``drive-mirror`` (and ``blockdev-mirror``): Synchronize a running disk to another image. -(4) ``drive-backup`` (and ``blockdev-backup``): Point-in-time (live) copy - of a block device to a destination. +(4) ``blockdev-backup`` (and the deprecated ``drive-backup``): + Point-in-time (live) copy of a block device to a destination. .. _`Interacting with a QEMU instance`: @@ -555,13 +555,14 @@ Currently, there are four different kinds: (3) ``none`` -- Synchronize only the new writes from this point on. - .. note:: In the case of ``drive-backup`` (or ``blockdev-backup``), - the behavior of ``none`` synchronization mode is different. - Normally, a ``backup`` job consists of two parts: Anything - that is overwritten by the guest is first copied out to - the backup, and in the background the whole image is - copied from start to end. With ``sync=none``, it's only - the first part. + .. note:: In the case of ``blockdev-backup`` (or deprecated + ``drive-backup``), the behavior of ``none`` + synchronization mode is different. Normally, a + ``backup`` job consists of two parts: Anything that is + overwritten by the guest is first copied out to the + backup, and in the background the whole image is copied + from start to end. With ``sync=none``, it's only the + first part. (4) ``incremental`` -- Synchronize content that is described by the dirty bitmap @@ -928,19 +929,22 @@ Shutdown the guest, by issuing the ``quit`` QMP command:: } -Live disk backup --- ``drive-backup`` and ``blockdev-backup`` -------------------------------------------------------------- +Live disk backup --- ``blockdev-backup`` and the deprecated``drive-backup`` +--------------------------------------------------------------------------- -The ``drive-backup`` (and its newer equivalent ``blockdev-backup``) allows +The ``blockdev-backup`` (and the deprecated ``drive-backup``) allows you to create a point-in-time snapshot. -In this case, the point-in-time is when you *start* the ``drive-backup`` -(or its newer equivalent ``blockdev-backup``) command. +In this case, the point-in-time is when you *start* the +``blockdev-backup`` (or deprecated ``drive-backup``) command. QMP invocation for ``drive-backup`` ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Note that ``drive-backup`` command is deprecated since QEMU 6.2 and +will be removed in future. + Yet again, starting afresh with our example disk image chain:: [A] <-- [B] <-- [C] <-- [D] @@ -965,11 +969,22 @@ will be issued, indicating the live block device job operation has completed, and no further action is required. +Moving from the deprecated ``drive-backup`` to newer ``blockdev-backup`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +``blockdev-backup`` differs from ``drive-backup`` in how you specify +the backup target. With ``blockdev-backup`` you can't specify filename +as a target. Instead you use ``node-name`` of existing block node, +which you may add by ``blockdev-add`` or ``blockdev-create`` commands. +Correspondingly, ``blockdev-backup`` doesn't have ``mode`` and +``format`` arguments which don't apply to an existing block node. See +following sections for details and examples. + + Notes on ``blockdev-backup`` ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The ``blockdev-backup`` command is equivalent in functionality to -``drive-backup``, except that it operates at node-level in a Block Driver +The ``blockdev-backup`` command operates at node-level in a Block Driver State (BDS) graph. E.g. the sequence of actions to create a point-in-time backup |