diff options
Diffstat (limited to 'hw/arm/mps3r.c')
| -rw-r--r-- | hw/arm/mps3r.c | 640 |
1 files changed, 640 insertions, 0 deletions
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index 0000000000..4d55a6564c --- /dev/null +++ b/hw/arm/mps3r.c @@ -0,0 +1,640 @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "qapi/qmp/qlist.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "sysemu/sysemu.h" +#include "hw/boards.h" +#include "hw/or-irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" +#include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; + hwaddr loader_start; +}; + +struct MPS3RMachineState { + MachineState parent; + struct arm_boot_info bootinfo; + MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; + Clock *clk; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; + QList *oscclk; + + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } + + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + mmc->loader_start = p->base; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); |