diff options
Diffstat (limited to 'hw/arm')
| -rw-r--r-- | hw/arm/Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/arm/boot.c | 14 | ||||
| -rw-r--r-- | hw/arm/nseries.c | 5 | ||||
| -rw-r--r-- | hw/arm/omap_sx1.c | 2 | ||||
| -rw-r--r-- | hw/arm/sysbus-fdt.c | 174 | ||||
| -rw-r--r-- | hw/arm/virt.c | 157 |
6 files changed, 317 insertions, 36 deletions
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index 4b09caf594..cf346c1d0a 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -5,6 +5,7 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o obj-$(CONFIG_ACPI) += virt-acpi-build.o obj-y += netduino2.o +obj-y += sysbus-fdt.o obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o obj-$(CONFIG_DIGIC) += digic.o diff --git a/hw/arm/boot.c b/hw/arm/boot.c index fa6950352c..d036624948 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -557,7 +557,7 @@ static void load_image_to_fw_cfg(FWCfgState *fw_cfg, uint16_t size_key, fw_cfg_add_bytes(fw_cfg, data_key, data, size); } -void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) +static void arm_load_kernel_notify(Notifier *notifier, void *data) { CPUState *cs; int kernel_size; @@ -568,6 +568,11 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) hwaddr entry, kernel_load_offset; int big_endian; static const ARMInsnFixup *primary_loader; + ArmLoadKernelNotifier *n = DO_UPCAST(ArmLoadKernelNotifier, + notifier, notifier); + ARMCPU *cpu = n->cpu; + struct arm_boot_info *info = + container_of(n, struct arm_boot_info, load_kernel_notifier); /* CPU objects (unlike devices) are not automatically reset on system * reset, so we must always register a handler to do so. If we're @@ -775,3 +780,10 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) ARM_CPU(cs)->env.boot_info = info; } } + +void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) +{ + info->load_kernel_notifier.cpu = cpu; + info->load_kernel_notifier.notifier.notify = arm_load_kernel_notify; + qemu_add_machine_init_done_notifier(&info->load_kernel_notifier.notifier); +} diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index d243159664..a659e8525d 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -133,9 +133,8 @@ static void n800_mmc_cs_cb(void *opaque, int line, int level) static void n8x0_gpio_setup(struct n800_s *s) { - qemu_irq *mmc_cs = qemu_allocate_irqs(n800_mmc_cs_cb, s->mpu->mmc, 1); - qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, mmc_cs[0]); - + qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, + qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0)); qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO)); } diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index 671e02c4ed..4b0f7f9c42 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -103,7 +103,6 @@ static void sx1_init(MachineState *machine, const int version) struct omap_mpu_state_s *mpu; MemoryRegion *address_space = get_system_memory(); MemoryRegion *flash = g_new(MemoryRegion, 1); - MemoryRegion *flash_1 = g_new(MemoryRegion, 1); MemoryRegion *cs = g_new(MemoryRegion, 4); static uint32_t cs0val = 0x00213090; static uint32_t cs1val = 0x00215070; @@ -165,6 +164,7 @@ static void sx1_init(MachineState *machine, const int version) if ((version == 1) && (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { + MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_ram(flash_1, NULL, "omap_sx1.flash1-0", flash1_size, &error_abort); vmstate_register_ram_global(flash_1); diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c new file mode 100644 index 0000000000..3038b94b4a --- /dev/null +++ b/hw/arm/sysbus-fdt.c @@ -0,0 +1,174 @@ +/* + * ARM Platform Bus device tree generation helpers + * + * Copyright (c) 2014 Linaro Limited + * + * Authors: + * Alex Graf <agraf@suse.de> + * Eric Auger <eric.auger@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include "hw/arm/sysbus-fdt.h" +#include "qemu/error-report.h" +#include "sysemu/device_tree.h" +#include "hw/platform-bus.h" +#include "sysemu/sysemu.h" + +/* + * internal struct that contains the information to create dynamic + * sysbus device node + */ +typedef struct PlatformBusFDTData { + void *fdt; /* device tree handle */ + int irq_start; /* index of the first IRQ usable by platform bus devices */ + const char *pbus_node_name; /* name of the platform bus node */ + PlatformBusDevice *pbus; +} PlatformBusFDTData; + +/* + * struct used when calling the machine init done notifier + * that constructs the fdt nodes of platform bus devices + */ +typedef struct PlatformBusFDTNotifierParams { + Notifier notifier; + ARMPlatformBusFDTParams *fdt_params; +} PlatformBusFDTNotifierParams; + +/* struct that associates a device type name and a node creation function */ +typedef struct NodeCreationPair { + const char *typename; + int (*add_fdt_node_fn)(SysBusDevice *sbdev, void *opaque); +} NodeCreationPair; + +/* list of supported dynamic sysbus devices */ +static const NodeCreationPair add_fdt_node_functions[] = { + {"", NULL}, /* last element */ +}; + +/** + * add_fdt_node - add the device tree node of a dynamic sysbus device + * + * @sbdev: handle to the sysbus device + * @opaque: handle to the PlatformBusFDTData + * + * Checks the sysbus type belongs to the list of device types that + * are dynamically instantiable and if so call the node creation + * function. + */ +static int add_fdt_node(SysBusDevice *sbdev, void *opaque) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(add_fdt_node_functions); i++) { + if (!strcmp(object_get_typename(OBJECT(sbdev)), + add_fdt_node_functions[i].typename)) { + ret = add_fdt_node_functions[i].add_fdt_node_fn(sbdev, opaque); + assert(!ret); + return 0; + } + } + error_report("Device %s can not be dynamically instantiated", + qdev_fw_name(DEVICE(sbdev))); + exit(1); +} + +/** + * add_all_platform_bus_fdt_nodes - create all the platform bus nodes + * + * builds the parent platform bus node and all the nodes of dynamic + * sysbus devices attached to it. + */ +static void add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params) +{ + const char platcomp[] = "qemu,platform\0simple-bus"; + PlatformBusDevice *pbus; + DeviceState *dev; + gchar *node; + uint64_t addr, size; + int irq_start, dtb_size; + struct arm_boot_info *info = fdt_params->binfo; + const ARMPlatformBusSystemParams *params = fdt_params->system_params; + const char *intc = fdt_params->intc; + void *fdt = info->get_dtb(info, &dtb_size); + + /* + * If the user provided a dtb, we assume the dynamic sysbus nodes + * already are integrated there. This corresponds to a use case where + * the dynamic sysbus nodes are complex and their generation is not yet + * supported. In that case the user can take charge of the guest dt + * while qemu takes charge of the qom stuff. + */ + if (info->dtb_filename) { + return; + } + + assert(fdt); + + node = g_strdup_printf("/platform@%"PRIx64, params->platform_bus_base); + addr = params->platform_bus_base; + size = params->platform_bus_size; + irq_start = params->platform_bus_first_irq; + + /* Create a /platform node that we can put all devices into */ + qemu_fdt_add_subnode(fdt, node); + qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp)); + + /* Our platform bus region is less than 32bits, so 1 cell is enough for + * address and size + */ + qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); + qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); + qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size); + + qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", intc); + + dev = qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE); + pbus = PLATFORM_BUS_DEVICE(dev); + + /* We can only create dt nodes for dynamic devices when they're ready */ + assert(pbus->done_gathering); + + PlatformBusFDTData data = { + .fdt = fdt, + .irq_start = irq_start, + .pbus_node_name = node, + .pbus = pbus, + }; + + /* Loop through all dynamic sysbus devices and create their node */ + foreach_dynamic_sysbus_device(add_fdt_node, &data); + + g_free(node); +} + +static void platform_bus_fdt_notify(Notifier *notifier, void *data) +{ + PlatformBusFDTNotifierParams *p = DO_UPCAST(PlatformBusFDTNotifierParams, + notifier, notifier); + + add_all_platform_bus_fdt_nodes(p->fdt_params); + g_free(p->fdt_params); + g_free(p); +} + +void arm_register_platform_bus_fdt_creator(ARMPlatformBusFDTParams *fdt_params) +{ + PlatformBusFDTNotifierParams *p = g_new(PlatformBusFDTNotifierParams, 1); + + p->fdt_params = fdt_params; + p->notifier.notify = platform_bus_fdt_notify; + qemu_add_machine_init_done_notifier(&p->notifier); +} diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 05db8cb2f7..0a75cc83ee 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -45,9 +45,11 @@ #include "qemu/error-report.h" #include "hw/pci-host/gpex.h" #include "hw/arm/virt-acpi-build.h" +#include "hw/arm/sysbus-fdt.h" +#include "hw/platform-bus.h" /* Number of external interrupt lines to configure the GIC with */ -#define NUM_IRQS 128 +#define NUM_IRQS 256 #define GIC_FDT_IRQ_TYPE_SPI 0 #define GIC_FDT_IRQ_TYPE_PPI 1 @@ -60,6 +62,10 @@ #define GIC_FDT_IRQ_PPI_CPU_START 8 #define GIC_FDT_IRQ_PPI_CPU_WIDTH 8 +#define PLATFORM_BUS_NUM_IRQS 64 + +static ARMPlatformBusSystemParams platform_bus_params; + typedef struct VirtBoardInfo { struct arm_boot_info bootinfo; const char *cpu_model; @@ -69,6 +75,8 @@ typedef struct VirtBoardInfo { void *fdt; int fdt_size; uint32_t clock_phandle; + uint32_t gic_phandle; + uint32_t v2m_phandle; } VirtBoardInfo; typedef struct { @@ -103,20 +111,22 @@ typedef struct { */ static const MemMapEntry a15memmap[] = { /* Space up to 0x8000000 is reserved for a boot ROM */ - [VIRT_FLASH] = { 0, 0x08000000 }, - [VIRT_CPUPERIPHS] = { 0x08000000, 0x00020000 }, + [VIRT_FLASH] = { 0, 0x08000000 }, + [VIRT_CPUPERIPHS] = { 0x08000000, 0x00020000 }, /* GIC distributor and CPU interfaces sit inside the CPU peripheral space */ - [VIRT_GIC_DIST] = { 0x08000000, 0x00010000 }, - [VIRT_GIC_CPU] = { 0x08010000, 0x00010000 }, - [VIRT_UART] = { 0x09000000, 0x00001000 }, - [VIRT_RTC] = { 0x09010000, 0x00001000 }, - [VIRT_FW_CFG] = { 0x09020000, 0x0000000a }, - [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, + [VIRT_GIC_DIST] = { 0x08000000, 0x00010000 }, + [VIRT_GIC_CPU] = { 0x08010000, 0x00010000 }, + [VIRT_GIC_V2M] = { 0x08020000, 0x00001000 }, + [VIRT_UART] = { 0x09000000, 0x00001000 }, + [VIRT_RTC] = { 0x09010000, 0x00001000 }, + [VIRT_FW_CFG] = { 0x09020000, 0x0000000a }, + [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ - [VIRT_PCIE_MMIO] = { 0x10000000, 0x2eff0000 }, - [VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 }, - [VIRT_PCIE_ECAM] = { 0x3f000000, 0x01000000 }, - [VIRT_MEM] = { 0x40000000, 30ULL * 1024 * 1024 * 1024 }, + [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, + [VIRT_PCIE_MMIO] = { 0x10000000, 0x2eff0000 }, + [VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 }, + [VIRT_PCIE_ECAM] = { 0x3f000000, 0x01000000 }, + [VIRT_MEM] = { 0x40000000, 30ULL * 1024 * 1024 * 1024 }, }; static const int a15irqmap[] = { @@ -124,6 +134,8 @@ static const int a15irqmap[] = { [VIRT_RTC] = 2, [VIRT_PCIE] = 3, /* ... to 6 */ [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ + [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ + [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */ }; static VirtBoardInfo machines[] = { @@ -299,12 +311,23 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi) } } -static uint32_t fdt_add_gic_node(const VirtBoardInfo *vbi) +static void fdt_add_v2m_gic_node(VirtBoardInfo *vbi) { - uint32_t gic_phandle; + vbi->v2m_phandle = qemu_fdt_alloc_phandle(vbi->fdt); + qemu_fdt_add_subnode(vbi->fdt, "/intc/v2m"); + qemu_fdt_setprop_string(vbi->fdt, "/intc/v2m", "compatible", + "arm,gic-v2m-frame"); + qemu_fdt_setprop(vbi->fdt, "/intc/v2m", "msi-controller", NULL, 0); + qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc/v2m", "reg", + 2, vbi->memmap[VIRT_GIC_V2M].base, + 2, vbi->memmap[VIRT_GIC_V2M].size); + qemu_fdt_setprop_cell(vbi->fdt, "/intc/v2m", "phandle", vbi->v2m_phandle); +} - gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt); - qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", gic_phandle); +static void fdt_add_gic_node(VirtBoardInfo *vbi) +{ + vbi->gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt); + qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", vbi->gic_phandle); qemu_fdt_add_subnode(vbi->fdt, "/intc"); /* 'cortex-a15-gic' means 'GIC v2' */ @@ -317,12 +340,32 @@ static uint32_t fdt_add_gic_node(const VirtBoardInfo *vbi) 2, vbi->memmap[VIRT_GIC_DIST].size, 2, vbi->memmap[VIRT_GIC_CPU].base, 2, vbi->memmap[VIRT_GIC_CPU].size); - qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", gic_phandle); + qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#address-cells", 0x2); + qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#size-cells", 0x2); + qemu_fdt_setprop(vbi->fdt, "/intc", "ranges", NULL, 0); + qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle); +} + +static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic) +{ + int i; + int irq = vbi->irqmap[VIRT_GIC_V2M]; + DeviceState *dev; - return gic_phandle; + dev = qdev_create(NULL, "arm-gicv2m"); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vbi->memmap[VIRT_GIC_V2M].base); + qdev_prop_set_uint32(dev, "base-spi", irq); + qdev_prop_set_uint32(dev, "num-spi", NUM_GICV2M_SPIS); + qdev_init_nofail(dev); + + for (i = 0; i < NUM_GICV2M_SPIS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + } + + fdt_add_v2m_gic_node(vbi); } -static uint32_t create_gic(const VirtBoardInfo *vbi, qemu_irq *pic) +static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic) { /* We create a standalone GIC v2 */ DeviceState *gicdev; @@ -371,7 +414,9 @@ static uint32_t create_gic(const VirtBoardInfo *vbi, qemu_irq *pic) pic[i] = qdev_get_gpio_in(gicdev, i); } - return fdt_add_gic_node(vbi); + fdt_add_gic_node(vbi); + + create_v2m(vbi, pic); } static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic) @@ -587,7 +632,7 @@ static void create_pcie_irq_map(const VirtBoardInfo *vbi, uint32_t gic_phandle, int first_irq, const char *nodename) { int devfn, pin; - uint32_t full_irq_map[4 * 4 * 8] = { 0 }; + uint32_t full_irq_map[4 * 4 * 10] = { 0 }; uint32_t *irq_map = full_irq_map; for (devfn = 0; devfn <= 0x18; devfn += 0x8) { @@ -600,13 +645,13 @@ static void create_pcie_irq_map(const VirtBoardInfo *vbi, uint32_t gic_phandle, uint32_t map[] = { devfn << 8, 0, 0, /* devfn */ pin + 1, /* PCI pin */ - gic_phandle, irq_type, irq_nr, irq_level }; /* GIC irq */ + gic_phandle, 0, 0, irq_type, irq_nr, irq_level }; /* GIC irq */ /* Convert map to big endian */ - for (i = 0; i < 8; i++) { + for (i = 0; i < 10; i++) { irq_map[i] = cpu_to_be32(map[i]); } - irq_map += 8; + irq_map += 10; } } @@ -618,8 +663,7 @@ static void create_pcie_irq_map(const VirtBoardInfo *vbi, uint32_t gic_phandle, 0x7 /* PCI irq */); } -static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic, - uint32_t gic_phandle) +static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic) { hwaddr base_mmio = vbi->memmap[VIRT_PCIE_MMIO].base; hwaddr size_mmio = vbi->memmap[VIRT_PCIE_MMIO].size; @@ -676,6 +720,8 @@ static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic, qemu_fdt_setprop_cells(vbi->fdt, nodename, "bus-range", 0, nr_pcie_buses - 1); + qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent", vbi->v2m_phandle); + qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base_ecam, 2, size_ecam); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "ranges", @@ -685,11 +731,52 @@ static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic, 2, base_mmio, 2, size_mmio); qemu_fdt_setprop_cell(vbi->fdt, nodename, "#interrupt-cells", 1); - create_pcie_irq_map(vbi, gic_phandle, irq, nodename); + create_pcie_irq_map(vbi, vbi->gic_phandle, irq, nodename); g_free(nodename); } +static void create_platform_bus(VirtBoardInfo *vbi, qemu_irq *pic) +{ + DeviceState *dev; + SysBusDevice *s; + int i; + ARMPlatformBusFDTParams *fdt_params = g_new(ARMPlatformBusFDTParams, 1); + MemoryRegion *sysmem = get_system_memory(); + + platform_bus_params.platform_bus_base = vbi->memmap[VIRT_PLATFORM_BUS].base; + platform_bus_params.platform_bus_size = vbi->memmap[VIRT_PLATFORM_BUS].size; + platform_bus_params.platform_bus_first_irq = vbi->irqmap[VIRT_PLATFORM_BUS]; + platform_bus_params.platform_bus_num_irqs = PLATFORM_BUS_NUM_IRQS; + + fdt_params->system_params = &platform_bus_params; + fdt_params->binfo = &vbi->bootinfo; + fdt_params->intc = "/intc"; + /* + * register a machine init done notifier that creates the device tree + * nodes of the platform bus and its children dynamic sysbus devices + */ + arm_register_platform_bus_fdt_creator(fdt_params); + + dev = qdev_create(NULL, TYPE_PLATFORM_BUS_DEVICE); + dev->id = TYPE_PLATFORM_BUS_DEVICE; + qdev_prop_set_uint32(dev, "num_irqs", + platform_bus_params.platform_bus_num_irqs); + qdev_prop_set_uint32(dev, "mmio_size", + platform_bus_params.platform_bus_size); + qdev_init_nofail(dev); + s = SYS_BUS_DEVICE(dev); + + for (i = 0; i < platform_bus_params.platform_bus_num_irqs; i++) { + int irqn = platform_bus_params.platform_bus_first_irq + i; + sysbus_connect_irq(s, i, pic[irqn]); + } + + memory_region_add_subregion(sysmem, + platform_bus_params.platform_bus_base, + sysbus_mmio_get_region(s, 0)); +} + static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size) { const VirtBoardInfo *board = (const VirtBoardInfo *)binfo; @@ -717,7 +804,6 @@ static void machvirt_init(MachineState *machine) VirtBoardInfo *vbi; VirtGuestInfoState *guest_info_state = g_malloc0(sizeof *guest_info_state); VirtGuestInfo *guest_info = &guest_info_state->info; - uint32_t gic_phandle; char **cpustr; if (!cpu_model) { @@ -794,13 +880,13 @@ static void machvirt_init(MachineState *machine) create_flash(vbi); - gic_phandle = create_gic(vbi, pic); + create_gic(vbi, pic); create_uart(vbi, pic); create_rtc(vbi, pic); - create_pcie(vbi, pic, gic_phandle); + create_pcie(vbi, pic); /* Create mmio transports, so the user can create virtio backends * (which will be automatically plugged in to the transports). If @@ -828,6 +914,14 @@ static void machvirt_init(MachineState *machine) vbi->bootinfo.get_dtb = machvirt_dtb; vbi->bootinfo.firmware_loaded = bios_name || drive_get(IF_PFLASH, 0, 0); arm_load_kernel(ARM_CPU(first_cpu), &vbi->bootinfo); + + /* + * arm_load_kernel machine init done notifier registration must + * happen before the platform_bus_create call. In this latter, + * another notifier is registered which adds platform bus nodes. + * Notifiers are executed in registration reverse order. + */ + create_platform_bus(vbi, pic); } static bool virt_get_secure(Object *obj, Error **errp) @@ -866,6 +960,7 @@ static void virt_class_init(ObjectClass *oc, void *data) mc->desc = "ARM Virtual Machine", mc->init = machvirt_init; mc->max_cpus = 8; + mc->has_dynamic_sysbus = true; } static const TypeInfo machvirt_info = { |