diff options
Diffstat (limited to 'hw/block')
| -rw-r--r-- | hw/block/m25p80.c | 80 |
1 files changed, 79 insertions, 1 deletions
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index a2438b9ed2..ea142160b3 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -240,6 +240,8 @@ static const FlashPartInfo known_devices[] = { { INFO("n25q128a13", 0x20ba18, 0, 64 << 10, 256, ER_4K) }, { INFO("n25q256a11", 0x20bb19, 0, 64 << 10, 512, ER_4K) }, { INFO("n25q256a13", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, + { INFO("n25q512a11", 0x20bb20, 0, 64 << 10, 1024, ER_4K) }, + { INFO("n25q512a13", 0x20ba20, 0, 64 << 10, 1024, ER_4K) }, { INFO("n25q128", 0x20ba18, 0, 64 << 10, 256, 0) }, { INFO("n25q256a", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, { INFO("n25q512a", 0x20ba20, 0, 64 << 10, 1024, ER_4K) }, @@ -331,7 +333,10 @@ typedef enum { WRDI = 0x4, RDSR = 0x5, WREN = 0x6, + BRRD = 0x16, + BRWR = 0x17, JEDEC_READ = 0x9f, + BULK_ERASE_60 = 0x60, BULK_ERASE = 0xc7, READ_FSR = 0x70, RDCR = 0x15, @@ -355,6 +360,8 @@ typedef enum { DPP = 0xa2, QPP = 0x32, QPP_4 = 0x34, + RDID_90 = 0x90, + RDID_AB = 0xab, ERASE_4K = 0x20, ERASE4_4K = 0x21, @@ -405,6 +412,7 @@ typedef enum { MAN_MACRONIX, MAN_NUMONYX, MAN_WINBOND, + MAN_SST, MAN_GENERIC, } Manufacturer; @@ -423,6 +431,7 @@ typedef struct Flash { uint8_t data[M25P80_INTERNAL_DATA_BUFFER_SZ]; uint32_t len; uint32_t pos; + bool data_read_loop; uint8_t needed_bytes; uint8_t cmd_in_progress; uint32_t cur_addr; @@ -475,6 +484,8 @@ static inline Manufacturer get_man(Flash *s) return MAN_SPANSION; case 0xC2: return MAN_MACRONIX; + case 0xBF: + return MAN_SST; default: return MAN_GENERIC; } @@ -698,6 +709,7 @@ static void complete_collecting_data(Flash *s) s->write_enable = false; } break; + case BRWR: case EXTEND_ADDR_WRITE: s->ear = s->data[0]; break; @@ -710,6 +722,31 @@ static void complete_collecting_data(Flash *s) case WEVCR: s->enh_volatile_cfg = s->data[0]; break; + case RDID_90: + case RDID_AB: + if (get_man(s) == MAN_SST) { + if (s->cur_addr <= 1) { + if (s->cur_addr) { + s->data[0] = s->pi->id[2]; + s->data[1] = s->pi->id[0]; + } else { + s->data[0] = s->pi->id[0]; + s->data[1] = s->pi->id[2]; + } + s->pos = 0; + s->len = 2; + s->data_read_loop = true; + s->state = STATE_READING_DATA; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "M25P80: Invalid read id address\n"); + } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "M25P80: Read id (command 0x90/0xAB) is not supported" + " by device\n"); + } + break; default: break; } @@ -925,6 +962,8 @@ static void decode_new_cmd(Flash *s, uint32_t value) case PP4: case PP4_4: case DIE_ERASE: + case RDID_90: + case RDID_AB: s->needed_bytes = get_addr_length(s); s->pos = 0; s->len = 0; @@ -983,6 +1022,7 @@ static void decode_new_cmd(Flash *s, uint32_t value) } s->pos = 0; s->len = 1; + s->data_read_loop = true; s->state = STATE_READING_DATA; break; @@ -993,6 +1033,7 @@ static void decode_new_cmd(Flash *s, uint32_t value) } s->pos = 0; s->len = 1; + s->data_read_loop = true; s->state = STATE_READING_DATA; break; @@ -1015,6 +1056,7 @@ static void decode_new_cmd(Flash *s, uint32_t value) s->state = STATE_READING_DATA; break; + case BULK_ERASE_60: case BULK_ERASE: if (s->write_enable) { DB_PRINT_L(0, "chip erase\n"); @@ -1032,12 +1074,14 @@ static void decode_new_cmd(Flash *s, uint32_t value) case EX_4BYTE_ADDR: s->four_bytes_address_mode = false; break; + case BRRD: case EXTEND_ADDR_READ: s->data[0] = s->ear; s->pos = 0; s->len = 1; s->state = STATE_READING_DATA; break; + case BRWR: case EXTEND_ADDR_WRITE: if (s->write_enable) { s->needed_bytes = 1; @@ -1133,6 +1177,7 @@ static int m25p80_cs(SSISlave *ss, bool select) s->pos = 0; s->state = STATE_IDLE; flash_sync_dirty(s, -1); + s->data_read_loop = false; } DB_PRINT_L(0, "%sselect\n", select ? "de" : ""); @@ -1198,7 +1243,9 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx) s->pos++; if (s->pos == s->len) { s->pos = 0; - s->state = STATE_IDLE; + if (!s->data_read_loop) { + s->state = STATE_IDLE; + } } break; @@ -1269,11 +1316,38 @@ static Property m25p80_properties[] = { DEFINE_PROP_END_OF_LIST(), }; +static int m25p80_pre_load(void *opaque) +{ + Flash *s = (Flash *)opaque; + + s->data_read_loop = false; + return 0; +} + +static bool m25p80_data_read_loop_needed(void *opaque) +{ + Flash *s = (Flash *)opaque; + + return s->data_read_loop; +} + +static const VMStateDescription vmstate_m25p80_data_read_loop = { + .name = "m25p80/data_read_loop", + .version_id = 1, + .minimum_version_id = 1, + .needed = m25p80_data_read_loop_needed, + .fields = (VMStateField[]) { + VMSTATE_BOOL(data_read_loop, Flash), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m25p80 = { .name = "m25p80", .version_id = 0, .minimum_version_id = 0, .pre_save = m25p80_pre_save, + .pre_load = m25p80_pre_load, .fields = (VMStateField[]) { VMSTATE_UINT8(state, Flash), VMSTATE_UINT8_ARRAY(data, Flash, M25P80_INTERNAL_DATA_BUFFER_SZ), @@ -1295,6 +1369,10 @@ static const VMStateDescription vmstate_m25p80 = { VMSTATE_UINT8(spansion_cr3nv, Flash), VMSTATE_UINT8(spansion_cr4nv, Flash), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_m25p80_data_read_loop, + NULL } }; |