diff options
Diffstat (limited to 'hw/char/max78000_uart.c')
| -rw-r--r-- | hw/char/max78000_uart.c | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/hw/char/max78000_uart.c b/hw/char/max78000_uart.c new file mode 100644 index 0000000000..19506d52ef --- /dev/null +++ b/hw/char/max78000_uart.c @@ -0,0 +1,285 @@ +/* + * MAX78000 UART + * + * Copyright (c) 2025 Jackson Donaldson <jcksn@duck.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "hw/char/max78000_uart.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "migration/vmstate.h" +#include "trace.h" + + +static int max78000_uart_can_receive(void *opaque) +{ + Max78000UartState *s = opaque; + if (!(s->ctrl & UART_BCLKEN)) { + return 0; + } + return fifo8_num_free(&s->rx_fifo); +} + +static void max78000_update_irq(Max78000UartState *s) +{ + int interrupt_level; + + interrupt_level = s->int_fl & s->int_en; + qemu_set_irq(s->irq, interrupt_level); +} + +static void max78000_uart_receive(void *opaque, const uint8_t *buf, int size) +{ + Max78000UartState *s = opaque; + + assert(size <= fifo8_num_free(&s->rx_fifo)); + + fifo8_push_all(&s->rx_fifo, buf, size); + + uint32_t rx_threshold = s->ctrl & 0xf; + + if (fifo8_num_used(&s->rx_fifo) >= rx_threshold) { + s->int_fl |= UART_RX_THD; + } + + max78000_update_irq(s); +} + +static void max78000_uart_reset_hold(Object *obj, ResetType type) +{ + Max78000UartState *s = MAX78000_UART(obj); + + s->ctrl = 0; + s->status = UART_TX_EM | UART_RX_EM; + s->int_en = 0; + s->int_fl = 0; + s->osr = 0; + s->txpeek = 0; + s->pnr = UART_RTS; + s->fifo = 0; + s->dma = 0; + s->wken = 0; + s->wkfl = 0; + fifo8_reset(&s->rx_fifo); +} + +static uint64_t max78000_uart_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Max78000UartState *s = opaque; + uint64_t retvalue = 0; + switch (addr) { + case UART_CTRL: + retvalue = s->ctrl; + break; + case UART_STATUS: + retvalue = (fifo8_num_used(&s->rx_fifo) << UART_RX_LVL) | + UART_TX_EM | + (fifo8_is_empty(&s->rx_fifo) ? UART_RX_EM : 0); + break; + case UART_INT_EN: + retvalue = s->int_en; + break; + case UART_INT_FL: + retvalue = s->int_fl; + break; + case UART_CLKDIV: + retvalue = s->clkdiv; + break; + case UART_OSR: + retvalue = s->osr; + break; + case UART_TXPEEK: + if (!fifo8_is_empty(&s->rx_fifo)) { + retvalue = fifo8_peek(&s->rx_fifo); + } + break; + case UART_PNR: + retvalue = s->pnr; + break; + case UART_FIFO: + if (!fifo8_is_empty(&s->rx_fifo)) { + retvalue = fifo8_pop(&s->rx_fifo); + max78000_update_irq(s); + } + break; + case UART_DMA: + /* DMA not implemented */ + retvalue = s->dma; + break; + case UART_WKEN: + retvalue = s->wken; + break; + case UART_WKFL: + retvalue = s->wkfl; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + break; + } + + return retvalue; +} + +static void max78000_uart_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Max78000UartState *s = opaque; + + uint32_t value = val64; + uint8_t data; + + switch (addr) { + case UART_CTRL: + if (value & UART_FLUSH_RX) { + fifo8_reset(&s->rx_fifo); + } + if (value & UART_BCLKEN) { + value = value | UART_BCLKRDY; + } + s->ctrl = value & ~(UART_FLUSH_RX | UART_FLUSH_TX); + + /* + * Software can manage UART flow control manually by setting hfc_en + * in UART_CTRL. This would require emulating uart at a lower level, + * and is currently unimplemented. + */ + + return; + case UART_STATUS: + /* UART_STATUS is read only */ + return; + case UART_INT_EN: + s->int_en = value; + return; + case UART_INT_FL: + s->int_fl = s->int_fl & ~(value); + max78000_update_irq(s); + return; + case UART_CLKDIV: + s->clkdiv = value; + return; + case UART_OSR: + s->osr = value; + return; + case UART_PNR: + s->pnr = value; + return; + case UART_FIFO: + data = value & 0xff; + /* + * XXX this blocks entire thread. Rewrite to use + * qemu_chr_fe_write and background I/O callbacks + */ + qemu_chr_fe_write_all(&s->chr, &data, 1); + + /* TX is always empty */ + s->int_fl |= UART_TX_HE; + max78000_update_irq(s); + + return; + case UART_DMA: + /* DMA not implemented */ + s->dma = value; + return; + case UART_WKEN: + s->wken = value; + return; + case UART_WKFL: + s->wkfl = value; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" + HWADDR_PRIx "\n", __func__, addr); + } +} + +static const MemoryRegionOps max78000_uart_ops = { + .read = max78000_uart_read, + .write = max78000_uart_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static const Property max78000_uart_properties[] = { + DEFINE_PROP_CHR("chardev", Max78000UartState, chr), +}; + +static const VMStateDescription max78000_uart_vmstate = { + .name = TYPE_MAX78000_UART, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ctrl, Max78000UartState), + VMSTATE_UINT32(status, Max78000UartState), + VMSTATE_UINT32(int_en, Max78000UartState), + VMSTATE_UINT32(int_fl, Max78000UartState), + VMSTATE_UINT32(clkdiv, Max78000UartState), + VMSTATE_UINT32(osr, Max78000UartState), + VMSTATE_UINT32(txpeek, Max78000UartState), + VMSTATE_UINT32(pnr, Max78000UartState), + VMSTATE_UINT32(fifo, Max78000UartState), + VMSTATE_UINT32(dma, Max78000UartState), + VMSTATE_UINT32(wken, Max78000UartState), + VMSTATE_UINT32(wkfl, Max78000UartState), + VMSTATE_FIFO8(rx_fifo, Max78000UartState), + VMSTATE_END_OF_LIST() + } +}; + +static void max78000_uart_init(Object *obj) +{ + Max78000UartState *s = MAX78000_UART(obj); + fifo8_create(&s->rx_fifo, 8); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &max78000_uart_ops, s, + TYPE_MAX78000_UART, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); +} + +static void max78000_uart_realize(DeviceState *dev, Error **errp) +{ + Max78000UartState *s = MAX78000_UART(dev); + + qemu_chr_fe_set_handlers(&s->chr, max78000_uart_can_receive, + max78000_uart_receive, NULL, NULL, + s, NULL, true); +} + +static void max78000_uart_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = max78000_uart_reset_hold; + + device_class_set_props(dc, max78000_uart_properties); + dc->realize = max78000_uart_realize; + + dc->vmsd = &max78000_uart_vmstate; +} + +static const TypeInfo max78000_uart_info = { + .name = TYPE_MAX78000_UART, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Max78000UartState), + .instance_init = max78000_uart_init, + .class_init = max78000_uart_class_init, +}; + +static void max78000_uart_register_types(void) +{ + type_register_static(&max78000_uart_info); +} + +type_init(max78000_uart_register_types) |