diff options
Diffstat (limited to 'hw/char/serial.c')
| -rw-r--r-- | hw/char/serial.c | 789 |
1 files changed, 789 insertions, 0 deletions
diff --git a/hw/char/serial.c b/hw/char/serial.c new file mode 100644 index 0000000000..1151bf1bab --- /dev/null +++ b/hw/char/serial.c @@ -0,0 +1,789 @@ +/* + * QEMU 16550A UART emulation + * + * Copyright (c) 2003-2004 Fabrice Bellard + * Copyright (c) 2008 Citrix Systems, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/char/serial.h" +#include "char/char.h" +#include "qemu/timer.h" +#include "exec/address-spaces.h" + +//#define DEBUG_SERIAL + +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ + +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ +#define UART_IIR_CTI 0x0C /* Character Timeout Indication */ + +#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functionning */ +#define UART_IIR_FE 0xC0 /* Fifo enabled */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +/* + * These are the definitions for the Modem Status Register + */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ +#define UART_LSR_INT_ANY 0x1E /* Any of the lsr-interrupt-triggering status bits */ + +/* Interrupt trigger levels. The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */ + +#define UART_FCR_ITL_1 0x00 /* 1 byte ITL */ +#define UART_FCR_ITL_2 0x40 /* 4 bytes ITL */ +#define UART_FCR_ITL_3 0x80 /* 8 bytes ITL */ +#define UART_FCR_ITL_4 0xC0 /* 14 bytes ITL */ + +#define UART_FCR_DMS 0x08 /* DMA Mode Select */ +#define UART_FCR_XFR 0x04 /* XMIT Fifo Reset */ +#define UART_FCR_RFR 0x02 /* RCVR Fifo Reset */ +#define UART_FCR_FE 0x01 /* FIFO Enable */ + +#define XMIT_FIFO 0 +#define RECV_FIFO 1 +#define MAX_XMIT_RETRY 4 + +#ifdef DEBUG_SERIAL +#define DPRINTF(fmt, ...) \ +do { fprintf(stderr, "serial: " fmt , ## __VA_ARGS__); } while (0) +#else +#define DPRINTF(fmt, ...) \ +do {} while (0) +#endif + +static void serial_receive1(void *opaque, const uint8_t *buf, int size); + +static void fifo_clear(SerialState *s, int fifo) +{ + SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; + memset(f->data, 0, UART_FIFO_LENGTH); + f->count = 0; + f->head = 0; + f->tail = 0; +} + +static int fifo_put(SerialState *s, int fifo, uint8_t chr) +{ + SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; + + /* Receive overruns do not overwrite FIFO contents. */ + if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) { + + f->data[f->head++] = chr; + + if (f->head == UART_FIFO_LENGTH) + f->head = 0; + } + + if (f->count < UART_FIFO_LENGTH) + f->count++; + else if (fifo == RECV_FIFO) + s->lsr |= UART_LSR_OE; + + return 1; +} + +static uint8_t fifo_get(SerialState *s, int fifo) +{ + SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; + uint8_t c; + + if(f->count == 0) + return 0; + + c = f->data[f->tail++]; + if (f->tail == UART_FIFO_LENGTH) + f->tail = 0; + f->count--; + + return c; +} + +static void serial_update_irq(SerialState *s) +{ + uint8_t tmp_iir = UART_IIR_NO_INT; + + if ((s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) { + tmp_iir = UART_IIR_RLSI; + } else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) { + /* Note that(s->ier & UART_IER_RDI) can mask this interrupt, + * this is not in the specification but is observed on existing + * hardware. */ + tmp_iir = UART_IIR_CTI; + } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) && + (!(s->fcr & UART_FCR_FE) || + s->recv_fifo.count >= s->recv_fifo.itl)) { + tmp_iir = UART_IIR_RDI; + } else if ((s->ier & UART_IER_THRI) && s->thr_ipending) { + tmp_iir = UART_IIR_THRI; + } else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) { + tmp_iir = UART_IIR_MSI; + } + + s->iir = tmp_iir | (s->iir & 0xF0); + + if (tmp_iir != UART_IIR_NO_INT) { + qemu_irq_raise(s->irq); + } else { + qemu_irq_lower(s->irq); + } +} + +static void serial_update_parameters(SerialState *s) +{ + int speed, parity, data_bits, stop_bits, frame_size; + QEMUSerialSetParams ssp; + + if (s->divider == 0) + return; + + /* Start bit. */ + frame_size = 1; + if (s->lcr & 0x08) { + /* Parity bit. */ + frame_size++; + if (s->lcr & 0x10) + parity = 'E'; + else + parity = 'O'; + } else { + parity = 'N'; + } + if (s->lcr & 0x04) + stop_bits = 2; + else + stop_bits = 1; + + data_bits = (s->lcr & 0x03) + 5; + frame_size += data_bits + stop_bits; + speed = s->baudbase / s->divider; + ssp.speed = speed; + ssp.parity = parity; + ssp.data_bits = data_bits; + ssp.stop_bits = stop_bits; + s->char_transmit_time = (get_ticks_per_sec() / speed) * frame_size; + qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); + + DPRINTF("speed=%d parity=%c data=%d stop=%d\n", + speed, parity, data_bits, stop_bits); +} + +static void serial_update_msl(SerialState *s) +{ + uint8_t omsr; + int flags; + + qemu_del_timer(s->modem_status_poll); + + if (qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) { + s->poll_msl = -1; + return; + } + + omsr = s->msr; + + s->msr = (flags & CHR_TIOCM_CTS) ? s->msr | UART_MSR_CTS : s->msr & ~UART_MSR_CTS; + s->msr = (flags & CHR_TIOCM_DSR) ? s->msr | UART_MSR_DSR : s->msr & ~UART_MSR_DSR; + s->msr = (flags & CHR_TIOCM_CAR) ? s->msr | UART_MSR_DCD : s->msr & ~UART_MSR_DCD; + s->msr = (flags & CHR_TIOCM_RI) ? s->msr | UART_MSR_RI : s->msr & ~UART_MSR_RI; + + if (s->msr != omsr) { + /* Set delta bits */ + s->msr = s->msr | ((s->msr >> 4) ^ (omsr >> 4)); + /* UART_MSR_TERI only if change was from 1 -> 0 */ + if ((s->msr & UART_MSR_TERI) && !(omsr & UART_MSR_RI)) + s->msr &= ~UART_MSR_TERI; + serial_update_irq(s); + } + + /* The real 16550A apparently has a 250ns response latency to line status changes. + We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */ + + if (s->poll_msl) + qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 100); +} + +static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque) +{ + SerialState *s = opaque; + + if (s->tsr_retry <= 0) { + if (s->fcr & UART_FCR_FE) { + s->tsr = fifo_get(s,XMIT_FIFO); + if (!s->xmit_fifo.count) + s->lsr |= UART_LSR_THRE; + } else if ((s->lsr & UART_LSR_THRE)) { + return FALSE; + } else { + s->tsr = s->thr; + s->lsr |= UART_LSR_THRE; + s->lsr &= ~UART_LSR_TEMT; + } + } + + if (s->mcr & UART_MCR_LOOP) { + /* in loopback mode, say that we just received a char */ + serial_receive1(s, &s->tsr, 1); + } else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) { + if (s->tsr_retry >= 0 && s->tsr_retry < MAX_XMIT_RETRY && + qemu_chr_fe_add_watch(s->chr, G_IO_OUT, serial_xmit, s) > 0) { + s->tsr_retry++; + return FALSE; + } + s->tsr_retry = 0; + } else { + s->tsr_retry = 0; + } + + s->last_xmit_ts = qemu_get_clock_ns(vm_clock); + + if (s->lsr & UART_LSR_THRE) { + s->lsr |= UART_LSR_TEMT; + s->thr_ipending = 1; + serial_update_irq(s); + } + + return FALSE; +} + + +static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) +{ + SerialState *s = opaque; + + addr &= 7; + DPRINTF("write addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 "\n", addr, val); + switch(addr) { + default: + case 0: + if (s->lcr & UART_LCR_DLAB) { + s->divider = (s->divider & 0xff00) | val; + serial_update_parameters(s); + } else { + s->thr = (uint8_t) val; + if(s->fcr & UART_FCR_FE) { + fifo_put(s, XMIT_FIFO, s->thr); + s->thr_ipending = 0; + s->lsr &= ~UART_LSR_TEMT; + s->lsr &= ~UART_LSR_THRE; + serial_update_irq(s); + } else { + s->thr_ipending = 0; + s->lsr &= ~UART_LSR_THRE; + serial_update_irq(s); + } + serial_xmit(NULL, G_IO_OUT, s); + } + break; + case 1: + if (s->lcr & UART_LCR_DLAB) { + s->divider = (s->divider & 0x00ff) | (val << 8); + serial_update_parameters(s); + } else { + s->ier = val & 0x0f; + /* If the backend device is a real serial port, turn polling of the modem + status lines on physical port on or off depending on UART_IER_MSI state */ + if (s->poll_msl >= 0) { + if (s->ier & UART_IER_MSI) { + s->poll_msl = 1; + serial_update_msl(s); + } else { + qemu_del_timer(s->modem_status_poll); + s->poll_msl = 0; + } + } + if (s->lsr & UART_LSR_THRE) { + s->thr_ipending = 1; + serial_update_irq(s); + } + } + break; + case 2: + val = val & 0xFF; + + if (s->fcr == val) + break; + + /* Did the enable/disable flag change? If so, make sure FIFOs get flushed */ + if ((val ^ s->fcr) & UART_FCR_FE) + val |= UART_FCR_XFR | UART_FCR_RFR; + + /* FIFO clear */ + + if (val & UART_FCR_RFR) { + qemu_del_timer(s->fifo_timeout_timer); + s->timeout_ipending=0; + fifo_clear(s,RECV_FIFO); + } + + if (val & UART_FCR_XFR) { + fifo_clear(s,XMIT_FIFO); + } + + if (val & UART_FCR_FE) { + s->iir |= UART_IIR_FE; + /* Set RECV_FIFO trigger Level */ + switch (val & 0xC0) { + case UART_FCR_ITL_1: + s->recv_fifo.itl = 1; + break; + case UART_FCR_ITL_2: + s->recv_fifo.itl = 4; + break; + case UART_FCR_ITL_3: + s->recv_fifo.itl = 8; + break; + case UART_FCR_ITL_4: + s->recv_fifo.itl = 14; + break; + } + } else + s->iir &= ~UART_IIR_FE; + + /* Set fcr - or at least the bits in it that are supposed to "stick" */ + s->fcr = val & 0xC9; + serial_update_irq(s); + break; + case 3: + { + int break_enable; + s->lcr = val; + serial_update_parameters(s); + break_enable = (val >> 6) & 1; + if (break_enable != s->last_break_enable) { + s->last_break_enable = break_enable; + qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK, + &break_enable); + } + } + break; + case 4: + { + int flags; + int old_mcr = s->mcr; + s->mcr = val & 0x1f; + if (val & UART_MCR_LOOP) + break; + + if (s->poll_msl >= 0 && old_mcr != s->mcr) { + + qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags); + + flags &= ~(CHR_TIOCM_RTS | CHR_TIOCM_DTR); + + if (val & UART_MCR_RTS) + flags |= CHR_TIOCM_RTS; + if (val & UART_MCR_DTR) + flags |= CHR_TIOCM_DTR; + + qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_SET_TIOCM, &flags); + /* Update the modem status after a one-character-send wait-time, since there may be a response + from the device/computer at the other end of the serial line */ + qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + s->char_transmit_time); + } + } + break; + case 5: + break; + case 6: + break; + case 7: + s->scr = val; + break; + } +} + +static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size) +{ + SerialState *s = opaque; + uint32_t ret; + + addr &= 7; + switch(addr) { + default: + case 0: + if (s->lcr & UART_LCR_DLAB) { + ret = s->divider & 0xff; + } else { + if(s->fcr & UART_FCR_FE) { + ret = fifo_get(s,RECV_FIFO); + if (s->recv_fifo.count == 0) + s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); + else + qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4); + s->timeout_ipending = 0; + } else { + ret = s->rbr; + s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); + } + serial_update_irq(s); + if (!(s->mcr & UART_MCR_LOOP)) { + /* in loopback mode, don't receive any data */ + qemu_chr_accept_input(s->chr); + } + } + break; + case 1: + if (s->lcr & UART_LCR_DLAB) { + ret = (s->divider >> 8) & 0xff; + } else { + ret = s->ier; + } + break; + case 2: + ret = s->iir; + if ((ret & UART_IIR_ID) == UART_IIR_THRI) { + s->thr_ipending = 0; + serial_update_irq(s); + } + break; + case 3: + ret = s->lcr; + break; + case 4: + ret = s->mcr; + break; + case 5: + ret = s->lsr; + /* Clear break and overrun interrupts */ + if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) { + s->lsr &= ~(UART_LSR_BI|UART_LSR_OE); + serial_update_irq(s); + } + break; + case 6: + if (s->mcr & UART_MCR_LOOP) { + /* in loopback, the modem output pins are connected to the + inputs */ + ret = (s->mcr & 0x0c) << 4; + ret |= (s->mcr & 0x02) << 3; + ret |= (s->mcr & 0x01) << 5; + } else { + if (s->poll_msl >= 0) + serial_update_msl(s); + ret = s->msr; + /* Clear delta bits & msr int after read, if they were set */ + if (s->msr & UART_MSR_ANY_DELTA) { + s->msr &= 0xF0; + serial_update_irq(s); + } + } + break; + case 7: + ret = s->scr; + break; + } + DPRINTF("read addr=0x%" HWADDR_PRIx " val=0x%02x\n", addr, ret); + return ret; +} + +static int serial_can_receive(SerialState *s) +{ + if(s->fcr & UART_FCR_FE) { + if(s->recv_fifo.count < UART_FIFO_LENGTH) + /* Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 if above. If UART_FIFO_LENGTH - fifo.count is + advertised the effect will be to almost always fill the fifo completely before the guest has a chance to respond, + effectively overriding the ITL that the guest has set. */ + return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1; + else + return 0; + } else { + return !(s->lsr & UART_LSR_DR); + } +} + +static void serial_receive_break(SerialState *s) +{ + s->rbr = 0; + /* When the LSR_DR is set a null byte is pushed into the fifo */ + fifo_put(s, RECV_FIFO, '\0'); + s->lsr |= UART_LSR_BI | UART_LSR_DR; + serial_update_irq(s); +} + +/* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */ +static void fifo_timeout_int (void *opaque) { + SerialState *s = opaque; + if (s->recv_fifo.count) { + s->timeout_ipending = 1; + serial_update_irq(s); + } +} + +static int serial_can_receive1(void *opaque) +{ + SerialState *s = opaque; + return serial_can_receive(s); +} + +static void serial_receive1(void *opaque, const uint8_t *buf, int size) +{ + SerialState *s = opaque; + + if (s->wakeup) { + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER); + } + if(s->fcr & UART_FCR_FE) { + int i; + for (i = 0; i < size; i++) { + fifo_put(s, RECV_FIFO, buf[i]); + } + s->lsr |= UART_LSR_DR; + /* call the timeout receive callback in 4 char transmit time */ + qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4); + } else { + if (s->lsr & UART_LSR_DR) + s->lsr |= UART_LSR_OE; + s->rbr = buf[0]; + s->lsr |= UART_LSR_DR; + } + serial_update_irq(s); +} + +static void serial_event(void *opaque, int event) +{ + SerialState *s = opaque; + DPRINTF("event %x\n", event); + if (event == CHR_EVENT_BREAK) + serial_receive_break(s); +} + +static void serial_pre_save(void *opaque) +{ + SerialState *s = opaque; + s->fcr_vmstate = s->fcr; +} + +static int serial_post_load(void *opaque, int version_id) +{ + SerialState *s = opaque; + + if (version_id < 3) { + s->fcr_vmstate = 0; + } + /* Initialize fcr via setter to perform essential side-effects */ + serial_ioport_write(s, 0x02, s->fcr_vmstate, 1); + serial_update_parameters(s); + return 0; +} + +const VMStateDescription vmstate_serial = { + .name = "serial", + .version_id = 3, + .minimum_version_id = 2, + .pre_save = serial_pre_save, + .post_load = serial_post_load, + .fields = (VMStateField []) { + VMSTATE_UINT16_V(divider, SerialState, 2), + VMSTATE_UINT8(rbr, SerialState), + VMSTATE_UINT8(ier, SerialState), + VMSTATE_UINT8(iir, SerialState), + VMSTATE_UINT8(lcr, SerialState), + VMSTATE_UINT8(mcr, SerialState), + VMSTATE_UINT8(lsr, SerialState), + VMSTATE_UINT8(msr, SerialState), + VMSTATE_UINT8(scr, SerialState), + VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3), + VMSTATE_END_OF_LIST() + } +}; + +static void serial_reset(void *opaque) +{ + SerialState *s = opaque; + + s->rbr = 0; + s->ier = 0; + s->iir = UART_IIR_NO_INT; + s->lcr = 0; + s->lsr = UART_LSR_TEMT | UART_LSR_THRE; + s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS; + /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */ + s->divider = 0x0C; + s->mcr = UART_MCR_OUT2; + s->scr = 0; + s->tsr_retry = 0; + s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10; + s->poll_msl = 0; + + fifo_clear(s,RECV_FIFO); + fifo_clear(s,XMIT_FIFO); + + s->last_xmit_ts = qemu_get_clock_ns(vm_clock); + + s->thr_ipending = 0; + s->last_break_enable = 0; + qemu_irq_lower(s->irq); +} + +void serial_init_core(SerialState *s) +{ + if (!s->chr) { + fprintf(stderr, "Can't create serial device, empty char device\n"); + exit(1); + } + + s->modem_status_poll = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) serial_update_msl, s); + + s->fifo_timeout_timer = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) fifo_timeout_int, s); + qemu_register_reset(serial_reset, s); + + qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1, + serial_event, s); +} + +void serial_exit_core(SerialState *s) +{ + qemu_chr_add_handlers(s->chr, NULL, NULL, NULL, NULL); + qemu_unregister_reset(serial_reset, s); +} + +/* Change the main reference oscillator frequency. */ +void serial_set_frequency(SerialState *s, uint32_t frequency) +{ + s->baudbase = frequency; + serial_update_parameters(s); +} + +const MemoryRegionOps serial_io_ops = { + .read = serial_ioport_read, + .write = serial_ioport_write, + .impl = { + .min_access_size = 1, + .max_access_size = 1, + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +SerialState *serial_init(int base, qemu_irq irq, int baudbase, + CharDriverState *chr, MemoryRegion *system_io) +{ + SerialState *s; + + s = g_malloc0(sizeof(SerialState)); + + s->irq = irq; + s->baudbase = baudbase; + s->chr = chr; + serial_init_core(s); + + vmstate_register(NULL, base, &vmstate_serial, s); + + memory_region_init_io(&s->io, &serial_io_ops, s, "serial", 8); + memory_region_add_subregion(system_io, base, &s->io); + + return s; +} + +/* Memory mapped interface */ +static uint64_t serial_mm_read(void *opaque, hwaddr addr, + unsigned size) +{ + SerialState *s = opaque; + return serial_ioport_read(s, addr >> s->it_shift, 1); +} + +static void serial_mm_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + SerialState *s = opaque; + value &= ~0u >> (32 - (size * 8)); + serial_ioport_write(s, addr >> s->it_shift, value, 1); +} + +static const MemoryRegionOps serial_mm_ops[3] = { + [DEVICE_NATIVE_ENDIAN] = { + .read = serial_mm_read, + .write = serial_mm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + }, + [DEVICE_LITTLE_ENDIAN] = { + .read = serial_mm_read, + .write = serial_mm_write, + .endianness = DEVICE_LITTLE_ENDIAN, + }, + [DEVICE_BIG_ENDIAN] = { + .read = serial_mm_read, + .write = serial_mm_write, + .endianness = DEVICE_BIG_ENDIAN, + }, +}; + +SerialState *serial_mm_init(MemoryRegion *address_space, + hwaddr base, int it_shift, + qemu_irq irq, int baudbase, + CharDriverState *chr, enum device_endian end) +{ + SerialState *s; + + s = g_malloc0(sizeof(SerialState)); + + s->it_shift = it_shift; + s->irq = irq; + s->baudbase = baudbase; + s->chr = chr; + + serial_init_core(s); + vmstate_register(NULL, base, &vmstate_serial, s); + + memory_region_init_io(&s->io, &serial_mm_ops[end], s, + "serial", 8 << it_shift); + memory_region_add_subregion(address_space, base, &s->io); + + serial_update_msl(s); + return s; +} |