diff options
Diffstat (limited to 'hw/i2c/aspeed_i2c.c')
| -rw-r--r-- | hw/i2c/aspeed_i2c.c | 439 |
1 files changed, 411 insertions, 28 deletions
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index 06c119f385..2da04a4bff 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -23,20 +23,25 @@ #include "migration/vmstate.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/error-report.h" +#include "qapi/error.h" #include "hw/i2c/aspeed_i2c.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "trace.h" /* I2C Global Register */ #define I2C_CTRL_STATUS 0x00 /* Device Interrupt Status */ #define I2C_CTRL_ASSIGN 0x08 /* Device Interrupt Target Assignment */ +#define I2C_CTRL_GLOBAL 0x0C /* Global Control Register */ +#define I2C_CTRL_SRAM_EN BIT(0) /* I2C Device (Bus) Register */ #define I2CD_FUN_CTRL_REG 0x00 /* I2CD Function Control */ -#define I2CD_BUFF_SEL_MASK (0x7 << 20) -#define I2CD_BUFF_SEL(x) (x << 20) +#define I2CD_POOL_PAGE_SEL(x) (((x) >> 20) & 0x7) /* AST2400 */ #define I2CD_M_SDA_LOCK_EN (0x1 << 16) #define I2CD_MULTI_MASTER_DIS (0x1 << 15) #define I2CD_M_SCL_DRIVE_EN (0x1 << 14) @@ -113,10 +118,12 @@ #define I2CD_SCL_O_OUT_DIR (0x1 << 12) #define I2CD_BUS_RECOVER_CMD_EN (0x1 << 11) #define I2CD_S_ALT_EN (0x1 << 10) -#define I2CD_RX_DMA_ENABLE (0x1 << 9) -#define I2CD_TX_DMA_ENABLE (0x1 << 8) /* Command Bit */ +#define I2CD_RX_DMA_ENABLE (0x1 << 9) +#define I2CD_TX_DMA_ENABLE (0x1 << 8) +#define I2CD_RX_BUFF_ENABLE (0x1 << 7) +#define I2CD_TX_BUFF_ENABLE (0x1 << 6) #define I2CD_M_STOP_CMD (0x1 << 5) #define I2CD_M_S_RX_CMD_LAST (0x1 << 4) #define I2CD_M_RX_CMD (0x1 << 3) @@ -125,13 +132,18 @@ #define I2CD_M_START_CMD (0x1) #define I2CD_DEV_ADDR_REG 0x18 /* Slave Device Address */ -#define I2CD_BUF_CTRL_REG 0x1c /* Pool Buffer Control */ +#define I2CD_POOL_CTRL_REG 0x1c /* Pool Buffer Control */ +#define I2CD_POOL_RX_COUNT(x) (((x) >> 24) & 0xff) +#define I2CD_POOL_RX_SIZE(x) ((((x) >> 16) & 0xff) + 1) +#define I2CD_POOL_TX_COUNT(x) ((((x) >> 8) & 0xff) + 1) +#define I2CD_POOL_OFFSET(x) (((x) & 0x3f) << 2) /* AST2400 */ #define I2CD_BYTE_BUF_REG 0x20 /* Transmit/Receive Byte Buffer */ #define I2CD_BYTE_BUF_TX_SHIFT 0 #define I2CD_BYTE_BUF_TX_MASK 0xff #define I2CD_BYTE_BUF_RX_SHIFT 8 #define I2CD_BYTE_BUF_RX_MASK 0xff - +#define I2CD_DMA_ADDR 0x24 /* DMA Buffer Address */ +#define I2CD_DMA_LEN 0x28 /* DMA Transfer Length < 4KB */ static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus) { @@ -147,6 +159,13 @@ static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + trace_aspeed_i2c_bus_raise_interrupt(bus->intr_status, + bus->intr_status & I2CD_INTR_TX_NAK ? "nak|" : "", + bus->intr_status & I2CD_INTR_TX_ACK ? "ack|" : "", + bus->intr_status & I2CD_INTR_RX_DONE ? "done|" : "", + bus->intr_status & I2CD_INTR_NORMAL_STOP ? "normal|" : "", + bus->intr_status & I2CD_INTR_ABNORMAL ? "abnormal" : ""); + bus->intr_status &= bus->intr_ctrl; if (bus->intr_status) { bus->controller->intr_status |= 1 << bus->id; @@ -158,27 +177,58 @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, unsigned size) { AspeedI2CBus *bus = opaque; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + uint64_t value = -1; switch (offset) { case I2CD_FUN_CTRL_REG: - return bus->ctrl; + value = bus->ctrl; + break; case I2CD_AC_TIMING_REG1: - return bus->timing[0]; + value = bus->timing[0]; + break; case I2CD_AC_TIMING_REG2: - return bus->timing[1]; + value = bus->timing[1]; + break; case I2CD_INTR_CTRL_REG: - return bus->intr_ctrl; + value = bus->intr_ctrl; + break; case I2CD_INTR_STS_REG: - return bus->intr_status; + value = bus->intr_status; + break; + case I2CD_POOL_CTRL_REG: + value = bus->pool_ctrl; + break; case I2CD_BYTE_BUF_REG: - return bus->buf; + value = bus->buf; + break; case I2CD_CMD_REG: - return bus->cmd | (i2c_bus_busy(bus->bus) << 16); + value = bus->cmd | (i2c_bus_busy(bus->bus) << 16); + break; + case I2CD_DMA_ADDR: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + value = bus->dma_addr; + break; + case I2CD_DMA_LEN: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + value = bus->dma_len; + break; + default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); - return -1; + value = -1; + break; } + + trace_aspeed_i2c_bus_read(bus->id, offset, size, value); + return value; } static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) @@ -192,14 +242,114 @@ static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; } -static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) +static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data) { - uint8_t ret; + MemTxResult result; + AspeedI2CState *s = bus->controller; + + result = address_space_read(&s->dram_as, bus->dma_addr, + MEMTXATTRS_UNSPECIFIED, data, 1); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n", + __func__, bus->dma_addr); + return -1; + } + bus->dma_addr++; + bus->dma_len--; + return 0; +} + +static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) +{ + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + int ret = -1; + int i; + + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + for (i = pool_start; i < I2CD_POOL_TX_COUNT(bus->pool_ctrl); i++) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + trace_aspeed_i2c_bus_send("BUF", i + 1, + I2CD_POOL_TX_COUNT(bus->pool_ctrl), + pool_base[i]); + ret = i2c_send(bus->bus, pool_base[i]); + if (ret) { + break; + } + } + bus->cmd &= ~I2CD_TX_BUFF_ENABLE; + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + while (bus->dma_len) { + uint8_t data; + aspeed_i2c_dma_read(bus, &data); + trace_aspeed_i2c_bus_send("DMA", bus->dma_len, bus->dma_len, data); + ret = i2c_send(bus->bus, data); + if (ret) { + break; + } + } + bus->cmd &= ~I2CD_TX_DMA_ENABLE; + } else { + trace_aspeed_i2c_bus_send("BYTE", pool_start, 1, bus->buf); + ret = i2c_send(bus->bus, bus->buf); + } + + return ret; +} + +static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) +{ + AspeedI2CState *s = bus->controller; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); + uint8_t data; + int i; + + if (bus->cmd & I2CD_RX_BUFF_ENABLE) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + for (i = 0; i < I2CD_POOL_RX_SIZE(bus->pool_ctrl); i++) { + pool_base[i] = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("BUF", i + 1, + I2CD_POOL_RX_SIZE(bus->pool_ctrl), + pool_base[i]); + } + + /* Update RX count */ + bus->pool_ctrl &= ~(0xff << 24); + bus->pool_ctrl |= (i & 0xff) << 24; + bus->cmd &= ~I2CD_RX_BUFF_ENABLE; + } else if (bus->cmd & I2CD_RX_DMA_ENABLE) { + uint8_t data; + + while (bus->dma_len) { + MemTxResult result; + + data = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("DMA", bus->dma_len, bus->dma_len, data); + result = address_space_write(&s->dram_as, bus->dma_addr, + MEMTXATTRS_UNSPECIFIED, &data, 1); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n", + __func__, bus->dma_addr); + return; + } + bus->dma_addr++; + bus->dma_len--; + } + bus->cmd &= ~I2CD_RX_DMA_ENABLE; + } else { + data = i2c_recv(bus->bus); + trace_aspeed_i2c_bus_recv("BYTE", 1, 1, bus->buf); + bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; + } +} + +static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) +{ aspeed_i2c_set_state(bus, I2CD_MRXD); - ret = i2c_recv(bus->bus); + aspeed_i2c_bus_recv(bus); bus->intr_status |= I2CD_INTR_RX_DONE; - bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { i2c_nack(bus->bus); } @@ -207,31 +357,133 @@ static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) aspeed_i2c_set_state(bus, I2CD_MACTIVE); } +static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus) +{ + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + uint8_t *pool_base = aic->bus_pool_base(bus); + + return pool_base[0]; + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + uint8_t data; + + aspeed_i2c_dma_read(bus, &data); + return data; + } else { + return bus->buf; + } +} + +static bool aspeed_i2c_check_sram(AspeedI2CBus *bus) +{ + AspeedI2CState *s = bus->controller; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); + + if (!aic->check_sram) { + return true; + } + + /* + * AST2500: SRAM must be enabled before using the Buffer Pool or + * DMA mode. + */ + if (!(s->ctrl_global & I2C_CTRL_SRAM_EN) && + (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE | + I2CD_RX_BUFF_ENABLE | I2CD_TX_BUFF_ENABLE))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: SRAM is not enabled\n", __func__); + return false; + } + + return true; +} + +static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus) +{ + g_autofree char *cmd_flags; + uint32_t count; + + if (bus->cmd & (I2CD_RX_BUFF_ENABLE | I2CD_RX_BUFF_ENABLE)) { + count = I2CD_POOL_TX_COUNT(bus->pool_ctrl); + } else if (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_RX_DMA_ENABLE)) { + count = bus->dma_len; + } else { /* BYTE mode */ + count = 1; + } + + cmd_flags = g_strdup_printf("%s%s%s%s%s%s%s%s%s", + bus->cmd & I2CD_M_START_CMD ? "start|" : "", + bus->cmd & I2CD_RX_DMA_ENABLE ? "rxdma|" : "", + bus->cmd & I2CD_TX_DMA_ENABLE ? "txdma|" : "", + bus->cmd & I2CD_RX_BUFF_ENABLE ? "rxbuf|" : "", + bus->cmd & I2CD_TX_BUFF_ENABLE ? "txbuf|" : "", + bus->cmd & I2CD_M_TX_CMD ? "tx|" : "", + bus->cmd & I2CD_M_RX_CMD ? "rx|" : "", + bus->cmd & I2CD_M_S_RX_CMD_LAST ? "last|" : "", + bus->cmd & I2CD_M_STOP_CMD ? "stop" : ""); + + trace_aspeed_i2c_bus_cmd(bus->cmd, cmd_flags, count, bus->intr_status); +} + /* * The state machine needs some refinement. It is only used to track * invalid STOP commands for the moment. */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { + uint8_t pool_start = 0; + bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; + if (!aspeed_i2c_check_sram(bus)) { + return; + } + + if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_CMD)) { + aspeed_i2c_bus_cmd_dump(bus); + } + if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? I2CD_MSTARTR : I2CD_MSTART; + uint8_t addr; aspeed_i2c_set_state(bus, state); - if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7), - extract32(bus->buf, 0, 1))) { + addr = aspeed_i2c_get_addr(bus); + + if (i2c_start_transfer(bus->bus, extract32(addr, 1, 7), + extract32(addr, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; } else { bus->intr_status |= I2CD_INTR_TX_ACK; } - /* START command is also a TX command, as the slave address is - * sent on the bus */ - bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD); + bus->cmd &= ~I2CD_M_START_CMD; + + /* + * The START command is also a TX command, as the slave + * address is sent on the bus. Drop the TX flag if nothing + * else needs to be sent in this sequence. + */ + if (bus->cmd & I2CD_TX_BUFF_ENABLE) { + if (I2CD_POOL_TX_COUNT(bus->pool_ctrl) == 1) { + bus->cmd &= ~I2CD_M_TX_CMD; + } else { + /* + * Increase the start index in the TX pool buffer to + * skip the address byte. + */ + pool_start++; + } + } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { + if (bus->dma_len == 0) { + bus->cmd &= ~I2CD_M_TX_CMD; + } + } else { + bus->cmd &= ~I2CD_M_TX_CMD; + } /* No slave found */ if (!i2c_bus_busy(bus->bus)) { @@ -242,7 +494,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (bus->cmd & I2CD_M_TX_CMD) { aspeed_i2c_set_state(bus, I2CD_MTXD); - if (i2c_send(bus->bus, bus->buf)) { + if (aspeed_i2c_bus_send(bus, pool_start)) { bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { @@ -278,6 +530,8 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); bool handle_rx; + trace_aspeed_i2c_bus_write(bus->id, offset, size, value); + switch (offset) { case I2CD_FUN_CTRL_REG: if (value & I2CD_SLAVE_EN) { @@ -313,6 +567,11 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", __func__); break; + case I2CD_POOL_CTRL_REG: + bus->pool_ctrl &= ~0xffffff; + bus->pool_ctrl |= (value & 0xffffff); + break; + case I2CD_BYTE_BUF_REG: bus->buf = (value & I2CD_BYTE_BUF_TX_MASK) << I2CD_BYTE_BUF_TX_SHIFT; break; @@ -327,9 +586,35 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, break; } + if (!aic->has_dma && + value & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + aspeed_i2c_bus_handle_cmd(bus, value); aspeed_i2c_bus_raise_interrupt(bus); break; + case I2CD_DMA_ADDR: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + + bus->dma_addr = value & 0xfffffffc; + break; + + case I2CD_DMA_LEN: + if (!aic->has_dma) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); + break; + } + + bus->dma_len = value & 0xfff; + if (!bus->dma_len) { + qemu_log_mask(LOG_UNIMP, "%s: invalid DMA length\n", __func__); + } + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", @@ -345,6 +630,8 @@ static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset, switch (offset) { case I2C_CTRL_STATUS: return s->intr_status; + case I2C_CTRL_GLOBAL: + return s->ctrl_global; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -357,7 +644,12 @@ static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset, static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { + AspeedI2CState *s = opaque; + switch (offset) { + case I2C_CTRL_GLOBAL: + s->ctrl_global = value; + break; case I2C_CTRL_STATUS: default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", @@ -378,10 +670,45 @@ static const MemoryRegionOps aspeed_i2c_ctrl_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +static uint64_t aspeed_i2c_pool_read(void *opaque, hwaddr offset, + unsigned size) +{ + AspeedI2CState *s = opaque; + uint64_t ret = 0; + int i; + + for (i = 0; i < size; i++) { + ret |= (uint64_t) s->pool[offset + i] << (8 * i); + } + + return ret; +} + +static void aspeed_i2c_pool_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AspeedI2CState *s = opaque; + int i; + + for (i = 0; i < size; i++) { + s->pool[offset + i] = (value >> (8 * i)) & 0xFF; + } +} + +static const MemoryRegionOps aspeed_i2c_pool_ops = { + .read = aspeed_i2c_pool_read, + .write = aspeed_i2c_pool_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + }, +}; + static const VMStateDescription aspeed_i2c_bus_vmstate = { .name = TYPE_ASPEED_I2C, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT8(id, AspeedI2CBus), VMSTATE_UINT32(ctrl, AspeedI2CBus), @@ -390,19 +717,23 @@ static const VMStateDescription aspeed_i2c_bus_vmstate = { VMSTATE_UINT32(intr_status, AspeedI2CBus), VMSTATE_UINT32(cmd, AspeedI2CBus), VMSTATE_UINT32(buf, AspeedI2CBus), + VMSTATE_UINT32(pool_ctrl, AspeedI2CBus), + VMSTATE_UINT32(dma_addr, AspeedI2CBus), + VMSTATE_UINT32(dma_len, AspeedI2CBus), VMSTATE_END_OF_LIST() } }; static const VMStateDescription aspeed_i2c_vmstate = { .name = TYPE_ASPEED_I2C, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(intr_status, AspeedI2CState), VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState, ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate, AspeedI2CBus), + VMSTATE_UINT8_ARRAY(pool, AspeedI2CState, ASPEED_I2C_MAX_POOL_SIZE), VMSTATE_END_OF_LIST() } }; @@ -420,6 +751,8 @@ static void aspeed_i2c_reset(DeviceState *dev) s->busses[i].intr_status = 0; s->busses[i].cmd = 0; s->busses[i].buf = 0; + s->busses[i].dma_addr = 0; + s->busses[i].dma_len = 0; i2c_end_transfer(s->busses[i].bus); } } @@ -472,14 +805,34 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset), &s->busses[i].mr); } + + memory_region_init_io(&s->pool_iomem, OBJECT(s), &aspeed_i2c_pool_ops, s, + "aspeed.i2c-pool", aic->pool_size); + memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem); + + if (aic->has_dma) { + if (!s->dram_mr) { + error_setg(errp, TYPE_ASPEED_I2C ": 'dram' link not set"); + return; + } + + address_space_init(&s->dram_as, s->dram_mr, "dma-dram"); + } } +static Property aspeed_i2c_properties[] = { + DEFINE_PROP_LINK("dram", AspeedI2CState, dram_mr, + TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &aspeed_i2c_vmstate; dc->reset = aspeed_i2c_reset; + dc->props = aspeed_i2c_properties; dc->realize = aspeed_i2c_realize; dc->desc = "Aspeed I2C Controller"; } @@ -498,6 +851,14 @@ static qemu_irq aspeed_2400_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->controller->irq; } +static uint8_t *aspeed_2400_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + uint8_t *pool_page = + &bus->controller->pool[I2CD_POOL_PAGE_SEL(bus->ctrl) * 0x100]; + + return &pool_page[I2CD_POOL_OFFSET(bus->pool_ctrl)]; +} + static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -509,6 +870,9 @@ static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq; + aic->pool_size = 0x800; + aic->pool_base = 0x800; + aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base; } static const TypeInfo aspeed_2400_i2c_info = { @@ -522,6 +886,11 @@ static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->controller->irq; } +static uint8_t *aspeed_2500_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + return &bus->controller->pool[bus->id * 0x10]; +} + static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -533,6 +902,11 @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq; + aic->pool_size = 0x100; + aic->pool_base = 0x200; + aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base; + aic->check_sram = true; + aic->has_dma = true; } static const TypeInfo aspeed_2500_i2c_info = { @@ -546,6 +920,11 @@ static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus) return bus->irq; } +static uint8_t *aspeed_2600_i2c_bus_pool_base(AspeedI2CBus *bus) +{ + return &bus->controller->pool[bus->id * 0x20]; +} + static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -557,6 +936,10 @@ static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) aic->reg_size = 0x80; aic->gap = -1; /* no gap */ aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq; + aic->pool_size = 0x200; + aic->pool_base = 0xC00; + aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base; + aic->has_dma = true; } static const TypeInfo aspeed_2600_i2c_info = { |