diff options
Diffstat (limited to 'hw/intc/gicv3_internal.h')
| -rw-r--r-- | hw/intc/gicv3_internal.h | 43 |
1 files changed, 38 insertions, 5 deletions
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index 1eeb99035d..b1af26df9f 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -110,6 +110,7 @@ #define GICR_NSACR (GICR_SGI_OFFSET + 0x0E00) #define GICR_CTLR_ENABLE_LPIS (1U << 0) +#define GICR_CTLR_CES (1U << 1) #define GICR_CTLR_RWP (1U << 3) #define GICR_CTLR_DPG0 (1U << 24) #define GICR_CTLR_DPG1NS (1U << 25) @@ -314,16 +315,18 @@ FIELD(GITS_TYPER, CIL, 36, 1) #define CMD_MASK 0xff /* ITS Commands */ -#define GITS_CMD_CLEAR 0x04 -#define GITS_CMD_DISCARD 0x0F +#define GITS_CMD_MOVI 0x01 #define GITS_CMD_INT 0x03 -#define GITS_CMD_MAPC 0x09 +#define GITS_CMD_CLEAR 0x04 +#define GITS_CMD_SYNC 0x05 #define GITS_CMD_MAPD 0x08 -#define GITS_CMD_MAPI 0x0B +#define GITS_CMD_MAPC 0x09 #define GITS_CMD_MAPTI 0x0A +#define GITS_CMD_MAPI 0x0B #define GITS_CMD_INV 0x0C #define GITS_CMD_INVALL 0x0D -#define GITS_CMD_SYNC 0x05 +#define GITS_CMD_MOVALL 0x0E +#define GITS_CMD_DISCARD 0x0F /* MAPC command fields */ #define ICID_LENGTH 16 @@ -354,6 +357,15 @@ FIELD(MAPC, RDBASE, 16, 32) #define L2_TABLE_VALID_MASK CMD_FIELD_VALID_MASK #define TABLE_ENTRY_VALID_MASK (1ULL << 0) +/* MOVALL command fields */ +FIELD(MOVALL_2, RDBASE1, 16, 36) +FIELD(MOVALL_3, RDBASE2, 16, 36) + +/* MOVI command fields */ +FIELD(MOVI_0, DEVICEID, 32, 32) +FIELD(MOVI_1, EVENTID, 0, 32) +FIELD(MOVI_2, ICID, 0, 16) + /* * 12 bytes Interrupt translation Table Entry size * as per Table 5.3 in GICv3 spec @@ -496,6 +508,27 @@ void gicv3_redist_update_lpi(GICv3CPUState *cs); * an incoming migration has loaded new state. */ void gicv3_redist_update_lpi_only(GICv3CPUState *cs); +/** + * gicv3_redist_mov_lpi: + * @src: source redistributor + * @dest: destination redistributor + * @irq: LPI to update + * + * Move the pending state of the specified LPI from @src to @dest, + * as required by the ITS MOVI command. + */ +void gicv3_redist_mov_lpi(GICv3CPUState *src, GICv3CPUState *dest, int irq); +/** + * gicv3_redist_movall_lpis: + * @src: source redistributor + * @dest: destination redistributor + * + * Scan the LPI pending table for @src, and for each pending LPI there + * mark it as not-pending for @src and pending for @dest, as required + * by the ITS MOVALL command. + */ +void gicv3_redist_movall_lpis(GICv3CPUState *src, GICv3CPUState *dest); + void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns); void gicv3_init_cpuif(GICv3State *s); |