diff options
Diffstat (limited to 'hw/intc/nios2_vic.c')
| -rw-r--r-- | hw/intc/nios2_vic.c | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/hw/intc/nios2_vic.c b/hw/intc/nios2_vic.c deleted file mode 100644 index 7e2d9d6327..0000000000 --- a/hw/intc/nios2_vic.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - * Vectored Interrupt Controller for nios2 processor - * - * Copyright (c) 2022 Neuroblade - * - * Interface: - * QOM property "cpu": link to the Nios2 CPU (must be set) - * Unnamed GPIO inputs 0..NIOS2_VIC_MAX_IRQ-1: input IRQ lines - * IRQ should be connected to nios2 IRQ0. - * - * Reference: "Embedded Peripherals IP User Guide - * for Intel® Quartus® Prime Design Suite: 21.4" - * Chapter 38 "Vectored Interrupt Controller Core" - * See: https://www.intel.com/content/www/us/en/docs/programmable/683130/21-4/vectored-interrupt-controller-core.html - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "qemu/osdep.h" - -#include "hw/irq.h" -#include "hw/qdev-properties.h" -#include "hw/sysbus.h" -#include "migration/vmstate.h" -#include "qapi/error.h" -#include "qemu/bitops.h" -#include "qemu/log.h" -#include "qom/object.h" -#include "hw/intc/nios2_vic.h" -#include "cpu.h" - - -enum { - INT_CONFIG0 = 0, - INT_CONFIG31 = 31, - INT_ENABLE = 32, - INT_ENABLE_SET = 33, - INT_ENABLE_CLR = 34, - INT_PENDING = 35, - INT_RAW_STATUS = 36, - SW_INTERRUPT = 37, - SW_INTERRUPT_SET = 38, - SW_INTERRUPT_CLR = 39, - VIC_CONFIG = 40, - VIC_STATUS = 41, - VEC_TBL_BASE = 42, - VEC_TBL_ADDR = 43, - CSR_COUNT /* Last! */ -}; - -/* Requested interrupt level (INT_CONFIG[0:5]) */ -static inline uint32_t vic_int_config_ril(const Nios2VIC *vic, int irq_num) -{ - return extract32(vic->int_config[irq_num], 0, 6); -} - -/* Requested NMI (INT_CONFIG[6]) */ -static inline uint32_t vic_int_config_rnmi(const Nios2VIC *vic, int irq_num) -{ - return extract32(vic->int_config[irq_num], 6, 1); -} - -/* Requested register set (INT_CONFIG[7:12]) */ -static inline uint32_t vic_int_config_rrs(const Nios2VIC *vic, int irq_num) -{ - return extract32(vic->int_config[irq_num], 7, 6); -} - -static inline uint32_t vic_config_vec_size(const Nios2VIC *vic) -{ - return 1 << (2 + extract32(vic->vic_config, 0, 3)); -} - -static inline uint32_t vic_int_pending(const Nios2VIC *vic) -{ - return (vic->int_raw_status | vic->sw_int) & vic->int_enable; -} - -static void vic_update_irq(Nios2VIC *vic) -{ - Nios2CPU *cpu = NIOS2_CPU(vic->cpu); - uint32_t pending = vic_int_pending(vic); - int irq = -1; - int max_ril = 0; - /* Note that if RIL is 0 for an interrupt it is effectively disabled */ - - vic->vec_tbl_addr = 0; - vic->vic_status = 0; - - if (pending == 0) { - qemu_irq_lower(vic->output_int); - return; - } - - for (int i = 0; i < NIOS2_VIC_MAX_IRQ; i++) { - if (pending & BIT(i)) { - int ril = vic_int_config_ril(vic, i); - if (ril > max_ril) { - irq = i; - max_ril = ril; - } - } - } - - if (irq < 0) { - qemu_irq_lower(vic->output_int); - return; - } - - vic->vec_tbl_addr = irq * vic_config_vec_size(vic) + vic->vec_tbl_base; - vic->vic_status = irq | BIT(31); - - /* - * In hardware, the interface between the VIC and the CPU is via the - * External Interrupt Controller interface, where the interrupt controller - * presents the CPU with a packet of data containing: - * - Requested Handler Address (RHA): 32 bits - * - Requested Register Set (RRS) : 6 bits - * - Requested Interrupt Level (RIL) : 6 bits - * - Requested NMI flag (RNMI) : 1 bit - * In our emulation, we implement this by writing the data directly to - * fields in the CPU object and then raising the IRQ line to tell - * the CPU that we've done so. - */ - - cpu->rha = vic->vec_tbl_addr; - cpu->ril = max_ril; - cpu->rrs = vic_int_config_rrs(vic, irq); - cpu->rnmi = vic_int_config_rnmi(vic, irq); - - qemu_irq_raise(vic->output_int); -} - -static void vic_set_irq(void *opaque, int irq_num, int level) -{ - Nios2VIC *vic = opaque; - - vic->int_raw_status = deposit32(vic->int_raw_status, irq_num, 1, !!level); - vic_update_irq(vic); -} - -static void nios2_vic_reset(DeviceState *dev) -{ - Nios2VIC *vic = NIOS2_VIC(dev); - - memset(&vic->int_config, 0, sizeof(vic->int_config)); - vic->vic_config = 0; - vic->int_raw_status = 0; - vic->int_enable = 0; - vic->sw_int = 0; - vic->vic_status = 0; - vic->vec_tbl_base = 0; - vic->vec_tbl_addr = 0; -} - -static uint64_t nios2_vic_csr_read(void *opaque, hwaddr offset, unsigned size) -{ - Nios2VIC *vic = opaque; - int index = offset / 4; - - switch (index) { - case INT_CONFIG0 ... INT_CONFIG31: - return vic->int_config[index - INT_CONFIG0]; - case INT_ENABLE: - return vic->int_enable; - case INT_PENDING: - return vic_int_pending(vic); - case INT_RAW_STATUS: - return vic->int_raw_status; - case SW_INTERRUPT: - return vic->sw_int; - case VIC_CONFIG: - return vic->vic_config; - case VIC_STATUS: - return vic->vic_status; - case VEC_TBL_BASE: - return vic->vec_tbl_base; - case VEC_TBL_ADDR: - return vic->vec_tbl_addr; - default: - return 0; - } -} - -static void nios2_vic_csr_write(void *opaque, hwaddr offset, uint64_t value, - unsigned size) -{ - Nios2VIC *vic = opaque; - int index = offset / 4; - - switch (index) { - case INT_CONFIG0 ... INT_CONFIG31: - vic->int_config[index - INT_CONFIG0] = value; - break; - case INT_ENABLE: - vic->int_enable = value; - break; - case INT_ENABLE_SET: - vic->int_enable |= value; - break; - case INT_ENABLE_CLR: - vic->int_enable &= ~value; - break; - case SW_INTERRUPT: - vic->sw_int = value; - break; - case SW_INTERRUPT_SET: - vic->sw_int |= value; - break; - case SW_INTERRUPT_CLR: - vic->sw_int &= ~value; - break; - case VIC_CONFIG: - vic->vic_config = value; - break; - case VEC_TBL_BASE: - vic->vec_tbl_base = value; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "nios2-vic: write to invalid CSR address %#" - HWADDR_PRIx "\n", offset); - } - - vic_update_irq(vic); -} - -static const MemoryRegionOps nios2_vic_csr_ops = { - .read = nios2_vic_csr_read, - .write = nios2_vic_csr_write, - .endianness = DEVICE_LITTLE_ENDIAN, - .valid = { .min_access_size = 4, .max_access_size = 4 } -}; - -static void nios2_vic_realize(DeviceState *dev, Error **errp) -{ - Nios2VIC *vic = NIOS2_VIC(dev); - - if (!vic->cpu) { - /* This is a programming error in the code using this device */ - error_setg(errp, "nios2-vic 'cpu' link property was not set"); - return; - } - - sysbus_init_irq(SYS_BUS_DEVICE(dev), &vic->output_int); - qdev_init_gpio_in(dev, vic_set_irq, NIOS2_VIC_MAX_IRQ); - - memory_region_init_io(&vic->csr, OBJECT(dev), &nios2_vic_csr_ops, vic, - "nios2.vic.csr", CSR_COUNT * sizeof(uint32_t)); - sysbus_init_mmio(SYS_BUS_DEVICE(dev), &vic->csr); -} - -static Property nios2_vic_properties[] = { - DEFINE_PROP_LINK("cpu", Nios2VIC, cpu, TYPE_CPU, CPUState *), - DEFINE_PROP_END_OF_LIST() -}; - -static const VMStateDescription nios2_vic_vmstate = { - .name = "nios2-vic", - .version_id = 1, - .minimum_version_id = 1, - .fields = (const VMStateField[]){ - VMSTATE_UINT32_ARRAY(int_config, Nios2VIC, 32), - VMSTATE_UINT32(vic_config, Nios2VIC), - VMSTATE_UINT32(int_raw_status, Nios2VIC), - VMSTATE_UINT32(int_enable, Nios2VIC), - VMSTATE_UINT32(sw_int, Nios2VIC), - VMSTATE_UINT32(vic_status, Nios2VIC), - VMSTATE_UINT32(vec_tbl_base, Nios2VIC), - VMSTATE_UINT32(vec_tbl_addr, Nios2VIC), - VMSTATE_END_OF_LIST() - }, -}; - -static void nios2_vic_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->reset = nios2_vic_reset; - dc->realize = nios2_vic_realize; - dc->vmsd = &nios2_vic_vmstate; - device_class_set_props(dc, nios2_vic_properties); -} - -static const TypeInfo nios2_vic_info = { - .name = TYPE_NIOS2_VIC, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(Nios2VIC), - .class_init = nios2_vic_class_init, -}; - -static void nios2_vic_register_types(void) -{ - type_register_static(&nios2_vic_info); -} - -type_init(nios2_vic_register_types); |