diff options
Diffstat (limited to 'hw/intc')
| -rw-r--r-- | hw/intc/armv7m_nvic.c | 913 | ||||
| -rw-r--r-- | hw/intc/trace-events | 13 |
2 files changed, 780 insertions, 146 deletions
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index d3e20561c7..d90d8d0784 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -47,13 +47,15 @@ * For historical reasons QEMU tends to use "interrupt" and * "exception" more or less interchangeably. */ -#define NVIC_FIRST_IRQ 16 +#define NVIC_FIRST_IRQ NVIC_INTERNAL_VECTORS #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active * (higher than the highest possible priority value) */ #define NVIC_NOEXC_PRIO 0x100 +/* Maximum priority of non-secure exceptions when AIRCR.PRIS is set */ +#define NVIC_NS_PRIO_LIMIT 0x80 static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 @@ -61,10 +63,10 @@ static const uint8_t nvic_id[] = { static int nvic_pending_prio(NVICState *s) { - /* return the priority of the current pending interrupt, + /* return the group priority of the current pending interrupt, * or NVIC_NOEXC_PRIO if no interrupt is pending */ - return s->vectpending ? s->vectors[s->vectpending].prio : NVIC_NOEXC_PRIO; + return s->vectpending_prio; } /* Return the value of the ISCR RETTOBASE bit: @@ -84,9 +86,12 @@ static int nvic_pending_prio(NVICState *s) static bool nvic_rettobase(NVICState *s) { int irq, nhand = 0; + bool check_sec = arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); for (irq = ARMV7M_EXCP_RESET; irq < s->num_irq; irq++) { - if (s->vectors[irq].active) { + if (s->vectors[irq].active || + (check_sec && irq < NVIC_INTERNAL_VECTORS && + s->sec_vectors[irq].active)) { nhand++; if (nhand == 2) { return 0; @@ -123,13 +128,139 @@ static bool nvic_isrpending(NVICState *s) return false; } +static bool exc_is_banked(int exc) +{ + /* Return true if this is one of the limited set of exceptions which + * are banked (and thus have state in sec_vectors[]) + */ + return exc == ARMV7M_EXCP_HARD || + exc == ARMV7M_EXCP_MEM || + exc == ARMV7M_EXCP_USAGE || + exc == ARMV7M_EXCP_SVC || + exc == ARMV7M_EXCP_PENDSV || + exc == ARMV7M_EXCP_SYSTICK; +} + /* Return a mask word which clears the subpriority bits from * a priority value for an M-profile exception, leaving only * the group priority. */ -static inline uint32_t nvic_gprio_mask(NVICState *s) +static inline uint32_t nvic_gprio_mask(NVICState *s, bool secure) +{ + return ~0U << (s->prigroup[secure] + 1); +} + +static bool exc_targets_secure(NVICState *s, int exc) +{ + /* Return true if this non-banked exception targets Secure state. */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + return false; + } + + if (exc >= NVIC_FIRST_IRQ) { + return !s->itns[exc]; + } + + /* Function shouldn't be called for banked exceptions. */ + assert(!exc_is_banked(exc)); + + switch (exc) { + case ARMV7M_EXCP_NMI: + case ARMV7M_EXCP_BUS: + return !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); + case ARMV7M_EXCP_SECURE: + return true; + case ARMV7M_EXCP_DEBUG: + /* TODO: controlled by DEMCR.SDME, which we don't yet implement */ + return false; + default: + /* reset, and reserved (unused) low exception numbers. + * We'll get called by code that loops through all the exception + * numbers, but it doesn't matter what we return here as these + * non-existent exceptions will never be pended or active. + */ + return true; + } +} + +static int exc_group_prio(NVICState *s, int rawprio, bool targets_secure) +{ + /* Return the group priority for this exception, given its raw + * (group-and-subgroup) priority value and whether it is targeting + * secure state or not. + */ + if (rawprio < 0) { + return rawprio; + } + rawprio &= nvic_gprio_mask(s, targets_secure); + /* AIRCR.PRIS causes us to squash all NS priorities into the + * lower half of the total range + */ + if (!targets_secure && + (s->cpu->env.v7m.aircr & R_V7M_AIRCR_PRIS_MASK)) { + rawprio = (rawprio >> 1) + NVIC_NS_PRIO_LIMIT; + } + return rawprio; +} + +/* Recompute vectpending and exception_prio for a CPU which implements + * the Security extension + */ +static void nvic_recompute_state_secure(NVICState *s) { - return ~0U << (s->prigroup + 1); + int i, bank; + int pend_prio = NVIC_NOEXC_PRIO; + int active_prio = NVIC_NOEXC_PRIO; + int pend_irq = 0; + bool pending_is_s_banked = false; + + /* R_CQRV: precedence is by: + * - lowest group priority; if both the same then + * - lowest subpriority; if both the same then + * - lowest exception number; if both the same (ie banked) then + * - secure exception takes precedence + * Compare pseudocode RawExecutionPriority. + * Annoyingly, now we have two prigroup values (for S and NS) + * we can't do the loop comparison on raw priority values. + */ + for (i = 1; i < s->num_irq; i++) { + for (bank = M_REG_S; bank >= M_REG_NS; bank--) { + VecInfo *vec; + int prio; + bool targets_secure; + + if (bank == M_REG_S) { + if (!exc_is_banked(i)) { + continue; + } + vec = &s->sec_vectors[i]; + targets_secure = true; + } else { + vec = &s->vectors[i]; + targets_secure = !exc_is_banked(i) && exc_targets_secure(s, i); + } + + prio = exc_group_prio(s, vec->prio, targets_secure); + if (vec->enabled && vec->pending && prio < pend_prio) { + pend_prio = prio; + pend_irq = i; + pending_is_s_banked = (bank == M_REG_S); + } + if (vec->active && prio < active_prio) { + active_prio = prio; + } + } + } + + s->vectpending_is_s_banked = pending_is_s_banked; + s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; + s->exception_prio = active_prio; + + trace_nvic_recompute_state_secure(s->vectpending, + s->vectpending_is_s_banked, + s->vectpending_prio, + s->exception_prio); } /* Recompute vectpending and exception_prio */ @@ -140,6 +271,18 @@ static void nvic_recompute_state(NVICState *s) int active_prio = NVIC_NOEXC_PRIO; int pend_irq = 0; + /* In theory we could write one function that handled both + * the "security extension present" and "not present"; however + * the security related changes significantly complicate the + * recomputation just by themselves and mixing both cases together + * would be even worse, so we retain a separate non-secure-only + * version for CPUs which don't implement the security extension. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + nvic_recompute_state_secure(s); + return; + } + for (i = 1; i < s->num_irq; i++) { VecInfo *vec = &s->vectors[i]; @@ -153,13 +296,20 @@ static void nvic_recompute_state(NVICState *s) } if (active_prio > 0) { - active_prio &= nvic_gprio_mask(s); + active_prio &= nvic_gprio_mask(s, false); + } + + if (pend_prio > 0) { + pend_prio &= nvic_gprio_mask(s, false); } s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; s->exception_prio = active_prio; - trace_nvic_recompute_state(s->vectpending, s->exception_prio); + trace_nvic_recompute_state(s->vectpending, + s->vectpending_prio, + s->exception_prio); } /* Return the current execution priority of the CPU @@ -169,21 +319,84 @@ static void nvic_recompute_state(NVICState *s) static inline int nvic_exec_prio(NVICState *s) { CPUARMState *env = &s->cpu->env; - int running; + int running = NVIC_NOEXC_PRIO; + + if (env->v7m.basepri[M_REG_NS] > 0) { + running = exc_group_prio(s, env->v7m.basepri[M_REG_NS], M_REG_NS); + } + + if (env->v7m.basepri[M_REG_S] > 0) { + int basepri = exc_group_prio(s, env->v7m.basepri[M_REG_S], M_REG_S); + if (running > basepri) { + running = basepri; + } + } - if (env->v7m.faultmask[env->v7m.secure]) { - running = -1; - } else if (env->v7m.primask[env->v7m.secure]) { + if (env->v7m.primask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + + if (env->v7m.primask[M_REG_S]) { running = 0; - } else if (env->v7m.basepri[env->v7m.secure] > 0) { - running = env->v7m.basepri[env->v7m.secure] & nvic_gprio_mask(s); - } else { - running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ } + + if (env->v7m.faultmask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + running = -1; + } else { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + } + + if (env->v7m.faultmask[M_REG_S]) { + running = (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) ? -3 : -1; + } + /* consider priority of active handler */ return MIN(running, s->exception_prio); } +bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +{ + /* Return true if the requested execution priority is negative + * for the specified security state, ie that security state + * has an active NMI or HardFault or has set its FAULTMASK. + * Note that this is not the same as whether the execution + * priority is actually negative (for instance AIRCR.PRIS may + * mean we don't allow FAULTMASK_NS to actually make the execution + * priority negative). Compare pseudocode IsReqExcPriNeg(). + */ + NVICState *s = opaque; + + if (s->cpu->env.v7m.faultmask[secure]) { + return true; + } + + if (secure ? s->sec_vectors[ARMV7M_EXCP_HARD].active : + s->vectors[ARMV7M_EXCP_HARD].active) { + return true; + } + + if (s->vectors[ARMV7M_EXCP_NMI].active && + exc_targets_secure(s, ARMV7M_EXCP_NMI) == secure) { + return true; + } + + return false; +} + bool armv7m_nvic_can_take_pending_exception(void *opaque) { NVICState *s = opaque; @@ -198,15 +411,40 @@ int armv7m_nvic_raw_execution_priority(void *opaque) return s->exception_prio; } -/* caller must call nvic_irq_update() after this */ -static void set_prio(NVICState *s, unsigned irq, uint8_t prio) +/* caller must call nvic_irq_update() after this. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static void set_prio(NVICState *s, unsigned irq, bool secure, uint8_t prio) { assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ assert(irq < s->num_irq); - s->vectors[irq].prio = prio; + if (secure) { + assert(exc_is_banked(irq)); + s->sec_vectors[irq].prio = prio; + } else { + s->vectors[irq].prio = prio; + } + + trace_nvic_set_prio(irq, secure, prio); +} + +/* Return the current raw priority register value. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static int get_prio(NVICState *s, unsigned irq, bool secure) +{ + assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ + assert(irq < s->num_irq); - trace_nvic_set_prio(irq, prio); + if (secure) { + assert(exc_is_banked(irq)); + return s->sec_vectors[irq].prio; + } else { + return s->vectors[irq].prio; + } } /* Recompute state and assert irq line accordingly. @@ -233,31 +471,50 @@ static void nvic_irq_update(NVICState *s) qemu_set_irq(s->excpout, lvl); } -static void armv7m_nvic_clear_pending(void *opaque, int irq) +/** + * armv7m_nvic_clear_pending: mark the specified exception as not pending + * @opaque: the NVIC + * @irq: the exception number to mark as not pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as not pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; - trace_nvic_clear_pending(irq, vec->enabled, vec->prio); + if (secure) { + assert(exc_is_banked(irq)); + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + trace_nvic_clear_pending(irq, secure, vec->enabled, vec->prio); if (vec->pending) { vec->pending = 0; nvic_irq_update(s); } } -void armv7m_nvic_set_pending(void *opaque, int irq) +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); - vec = &s->vectors[irq]; - trace_nvic_set_pending(irq, vec->enabled, vec->prio); + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + trace_nvic_set_pending(irq, secure, vec->enabled, vec->prio); if (irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV) { /* If a synchronous exception is pending then it may be @@ -283,7 +540,7 @@ void armv7m_nvic_set_pending(void *opaque, int irq) int running = nvic_exec_prio(s); bool escalate = false; - if (vec->prio >= running) { + if (exc_group_prio(s, vec->prio, secure) >= running) { trace_nvic_escalate_prio(irq, vec->prio, running); escalate = true; } else if (!vec->enabled) { @@ -292,8 +549,22 @@ void armv7m_nvic_set_pending(void *opaque, int irq) } if (escalate) { - if (running < 0) { - /* We want to escalate to HardFault but we can't take a + + /* We need to escalate this exception to a synchronous HardFault. + * If BFHFNMINS is set then we escalate to the banked HF for + * the target security state of the original exception; otherwise + * we take a Secure HardFault. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + if (running <= vec->prio) { + /* We want to escalate to HardFault but we can't take the * synchronous HardFault at this point either. This is a * Lockup condition due to a guest bug. We don't model * Lockup, so report via cpu_abort() instead. @@ -303,9 +574,7 @@ void armv7m_nvic_set_pending(void *opaque, int irq) "(current priority %d)\n", irq, running); } - /* We can do the escalation, so we take HardFault instead */ - irq = ARMV7M_EXCP_HARD; - vec = &s->vectors[irq]; + /* HF may be banked but there is only one shared HFSR */ s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; } } @@ -317,29 +586,32 @@ void armv7m_nvic_set_pending(void *opaque, int irq) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +bool armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); - int pendgroupprio; VecInfo *vec; + bool targets_secure; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); - vec = &s->vectors[pending]; + if (s->vectpending_is_s_banked) { + vec = &s->sec_vectors[pending]; + targets_secure = true; + } else { + vec = &s->vectors[pending]; + targets_secure = !exc_is_banked(s->vectpending) && + exc_targets_secure(s, s->vectpending); + } assert(vec->enabled); assert(vec->pending); - pendgroupprio = vec->prio; - if (pendgroupprio > 0) { - pendgroupprio &= nvic_gprio_mask(s); - } - assert(pendgroupprio < running); + assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, vec->prio); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio, targets_secure); vec->active = 1; vec->pending = 0; @@ -347,9 +619,11 @@ void armv7m_nvic_acknowledge_irq(void *opaque) env->v7m.exception = s->vectpending; nvic_irq_update(s); + + return targets_secure; } -int armv7m_nvic_complete_irq(void *opaque, int irq) +int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; @@ -357,9 +631,13 @@ int armv7m_nvic_complete_irq(void *opaque, int irq) assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; + if (secure && exc_is_banked(irq)) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } - trace_nvic_complete_irq(irq); + trace_nvic_complete_irq(irq, secure); if (!vec->active) { /* Tell the caller this was an illegal exception return */ @@ -405,7 +683,7 @@ static void set_irq_level(void *opaque, int n, int level) if (level != vec->level) { vec->level = level; if (level) { - armv7m_nvic_set_pending(s, n); + armv7m_nvic_set_pending(s, n, false); } } } @@ -418,9 +696,28 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + return 0; + } + val = 0; + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + if (s->itns[startvec + i]) { + val |= (1 << i); + } + } + return val; + } case 0xd00: /* CPUID Base. */ return cpu->midr; - case 0xd04: /* Interrupt Control State. */ + case 0xd04: /* Interrupt Control State (ICSR) */ /* VECTACTIVE */ val = cpu->env.v7m.exception; /* VECTPENDING */ @@ -433,24 +730,50 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) if (nvic_rettobase(s)) { val |= (1 << 11); } - /* PENDSTSET */ - if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { - val |= (1 << 26); - } - /* PENDSVSET */ - if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { - val |= (1 << 28); + if (attrs.secure) { + /* PENDSTSET */ + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } + } else { + /* PENDSTSET */ + if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } } /* NMIPENDSET */ - if (s->vectors[ARMV7M_EXCP_NMI].pending) { + if ((cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + s->vectors[ARMV7M_EXCP_NMI].pending) { val |= (1 << 31); } - /* ISRPREEMPT not implemented */ + /* ISRPREEMPT: RES0 when halting debug not implemented */ + /* STTNS: RES0 for the Main Extension */ return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase[attrs.secure]; - case 0xd0c: /* Application Interrupt/Reset Control. */ - return 0xfa050000 | (s->prigroup << 8); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + val = 0xfa050000 | (s->prigroup[attrs.secure] << 8); + if (attrs.secure) { + /* s->aircr stores PRIS, BFHFNMINS, SYSRESETREQS */ + val |= cpu->env.v7m.aircr; + } else { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* BFHFNMINS is R/O from NS; other bits are RAZ/WI. If + * security isn't supported then BFHFNMINS is RAO (and + * the bit in env.v7m.aircr is always set). + */ + val |= cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK; + } + } + return val; case 0xd10: /* System Control. */ /* TODO: Implement SLEEPONEXIT. */ return 0; @@ -461,50 +784,117 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; return val; - case 0xd24: /* System Handler Status. */ + case 0xd24: /* System Handler Control and State (SHCSR) */ val = 0; - if (s->vectors[ARMV7M_EXCP_MEM].active) { - val |= (1 << 0); - } - if (s->vectors[ARMV7M_EXCP_BUS].active) { - val |= (1 << 1); - } - if (s->vectors[ARMV7M_EXCP_USAGE].active) { - val |= (1 << 3); + if (attrs.secure) { + if (s->sec_vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + /* SecureFault is not banked but is always RAZ/WI to NS */ + if (s->vectors[ARMV7M_EXCP_SECURE].active) { + val |= (1 << 4); + } + if (s->vectors[ARMV7M_EXCP_SECURE].enabled) { + val |= (1 << 19); + } + if (s->vectors[ARMV7M_EXCP_SECURE].pending) { + val |= (1 << 20); + } + } else { + if (s->vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTACT, HARDFAULTPENDED not present in v7M */ + if (s->vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + } + if (s->vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } } - if (s->vectors[ARMV7M_EXCP_SVC].active) { - val |= (1 << 7); + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + if (s->vectors[ARMV7M_EXCP_BUS].active) { + val |= (1 << 1); + } + if (s->vectors[ARMV7M_EXCP_BUS].pending) { + val |= (1 << 14); + } + if (s->vectors[ARMV7M_EXCP_BUS].enabled) { + val |= (1 << 17); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8) && + s->vectors[ARMV7M_EXCP_NMI].active) { + /* NMIACT is not present in v7M */ + val |= (1 << 5); + } } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ if (s->vectors[ARMV7M_EXCP_DEBUG].active) { val |= (1 << 8); } - if (s->vectors[ARMV7M_EXCP_PENDSV].active) { - val |= (1 << 10); - } - if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { - val |= (1 << 11); - } - if (s->vectors[ARMV7M_EXCP_USAGE].pending) { - val |= (1 << 12); - } - if (s->vectors[ARMV7M_EXCP_MEM].pending) { - val |= (1 << 13); - } - if (s->vectors[ARMV7M_EXCP_BUS].pending) { - val |= (1 << 14); - } - if (s->vectors[ARMV7M_EXCP_SVC].pending) { - val |= (1 << 15); - } - if (s->vectors[ARMV7M_EXCP_MEM].enabled) { - val |= (1 << 16); - } - if (s->vectors[ARMV7M_EXCP_BUS].enabled) { - val |= (1 << 17); - } - if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { - val |= (1 << 18); - } return val; case 0xd28: /* Configurable Fault Status. */ /* The BFSR bits [15:8] are shared between security states @@ -640,40 +1030,87 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, ARMCPU *cpu = s->cpu; switch (offset) { - case 0xd04: /* Interrupt Control State. */ - if (value & (1 << 31)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + break; + } + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + s->itns[startvec + i] = (value >> i) & 1; + } + nvic_irq_update(s); + break; + } + case 0xd04: /* Interrupt Control State (ICSR) */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + if (value & (1 << 31)) { + armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); + } else if (value & (1 << 30) && + arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* PENDNMICLR didn't exist in v7M */ + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_NMI, false); + } } if (value & (1 << 28)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } else if (value & (1 << 27)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } if (value & (1 << 26)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } else if (value & (1 << 25)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } break; case 0xd08: /* Vector Table Offset. */ cpu->env.v7m.vecbase[attrs.secure] = value & 0xffffff80; break; - case 0xd0c: /* Application Interrupt/Reset Control. */ - if ((value >> 16) == 0x05fa) { - if (value & 4) { - qemu_irq_pulse(s->sysresetreq); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + if ((value >> R_V7M_AIRCR_VECTKEY_SHIFT) == 0x05fa) { + if (value & R_V7M_AIRCR_SYSRESETREQ_MASK) { + if (attrs.secure || + !(cpu->env.v7m.aircr & R_V7M_AIRCR_SYSRESETREQS_MASK)) { + qemu_irq_pulse(s->sysresetreq); + } } - if (value & 2) { + if (value & R_V7M_AIRCR_VECTCLRACTIVE_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTCLRACTIVE when not in DEBUG mode " "is UNPREDICTABLE\n"); } - if (value & 1) { + if (value & R_V7M_AIRCR_VECTRESET_MASK) { + /* NB: this bit is RES0 in v8M */ qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTRESET when not in DEBUG mode " "is UNPREDICTABLE\n"); } - s->prigroup = extract32(value, 8, 3); + s->prigroup[attrs.secure] = extract32(value, + R_V7M_AIRCR_PRIGROUP_SHIFT, + R_V7M_AIRCR_PRIGROUP_LENGTH); + if (attrs.secure) { + /* These bits are only writable by secure */ + cpu->env.v7m.aircr = value & + (R_V7M_AIRCR_SYSRESETREQS_MASK | + R_V7M_AIRCR_BFHFNMINS_MASK | + R_V7M_AIRCR_PRIS_MASK); + /* BFHFNMINS changes the priority of Secure HardFault, and + * allows a pending Non-secure HardFault to preempt (which + * we implement by marking it enabled). + */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -3; + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; + } else { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; + } + } nvic_irq_update(s); } break; @@ -705,21 +1142,71 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; - case 0xd24: /* System Handler Control. */ - s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; - s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; - s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + case 0xd24: /* System Handler Control and State (SHCSR) */ + if (attrs.secure) { + s->sec_vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + /* Secure HardFault active bit cannot be written */ + s->sec_vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->sec_vectors[ARMV7M_EXCP_PENDSV].active = + (value & (1 << 10)) != 0; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].active = + (value & (1 << 11)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].pending = + (value & (1 << 12)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->sec_vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].enabled = + (value & (1 << 18)) != 0; + /* SecureFault not banked, but RAZ/WI to NS */ + s->vectors[ARMV7M_EXCP_SECURE].active = (value & (1 << 4)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].enabled = (value & (1 << 19)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].pending = (value & (1 << 20)) != 0; + } else { + s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTPENDED is not present in v7M */ + s->vectors[ARMV7M_EXCP_HARD].pending = (value & (1 << 21)) != 0; + } + s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; + s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; + s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; + } + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; + s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; + s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + } + /* NMIACT can only be written if the write is of a zero, with + * BFHFNMINS 1, and by the CPU in secure state via the NS alias. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 5)) == 0) { + s->vectors[ARMV7M_EXCP_NMI].active = 0; + } + /* HARDFAULTACT can only be written if the write is of a zero + * to the non-secure HardFault state by the CPU in secure state. + * The only case where we can be targeting the non-secure HF state + * when in secure state is if this is a write via the NS alias + * and BFHFNMINS is 1. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 2)) == 0) { + s->vectors[ARMV7M_EXCP_HARD].active = 0; + } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ s->vectors[ARMV7M_EXCP_DEBUG].active = (value & (1 << 8)) != 0; - s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; - s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; - s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; - s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; - s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; - s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; - s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; nvic_irq_update(s); break; case 0xd28: /* Configurable Fault Status. */ @@ -885,7 +1372,7 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, { int excnum = (value & 0x1ff) + NVIC_FIRST_IRQ; if (excnum < s->num_irq) { - armv7m_nvic_set_pending(s, excnum); + armv7m_nvic_set_pending(s, excnum, false); } break; } @@ -911,6 +1398,47 @@ static bool nvic_user_access_ok(NVICState *s, hwaddr offset, MemTxAttrs attrs) } } +static int shpr_bank(NVICState *s, int exc, MemTxAttrs attrs) +{ + /* Behaviour for the SHPR register field for this exception: + * return M_REG_NS to use the nonsecure vector (including for + * non-banked exceptions), M_REG_S for the secure version of + * a banked exception, and -1 if this field should RAZ/WI. + */ + switch (exc) { + case ARMV7M_EXCP_MEM: + case ARMV7M_EXCP_USAGE: + case ARMV7M_EXCP_SVC: + case ARMV7M_EXCP_PENDSV: + case ARMV7M_EXCP_SYSTICK: + /* Banked exceptions */ + return attrs.secure; + case ARMV7M_EXCP_BUS: + /* Not banked, RAZ/WI from nonsecure if BFHFNMINS is zero */ + if (!attrs.secure && + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_SECURE: + /* Not banked, RAZ/WI from nonsecure */ + if (!attrs.secure) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_DEBUG: + /* Not banked. TODO should RAZ/WI if DEMCR.SDME is set */ + return M_REG_NS; + case 8 ... 10: + case 13: + /* RES0 */ + return -1; + default: + /* Not reachable due to decode of SHPR register addresses */ + g_assert_not_reached(); + } +} + static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, uint64_t *data, unsigned size, MemTxAttrs attrs) @@ -935,7 +1463,8 @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x180 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].enabled) { + if (s->vectors[startvec + i].enabled && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -947,7 +1476,8 @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, val = 0; startvec = offset - 0x280 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].pending) { + if (s->vectors[startvec + i].pending && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -957,7 +1487,8 @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x300 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].active) { + if (s->vectors[startvec + i].active && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -967,13 +1498,21 @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x400 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - val |= s->vectors[startvec + i].prio << (8 * i); + if (attrs.secure || s->itns[startvec + i]) { + val |= s->vectors[startvec + i].prio << (8 * i); + } } break; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ val = 0; for (i = 0; i < size; i++) { - val |= s->vectors[(offset - 0xd14) + i].prio << (i * 8); + unsigned hdlidx = (offset - 0xd14) + i; + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + val = deposit32(val, i * 8, 8, get_prio(s, hdlidx, sbank)); } break; case 0xfe0 ... 0xfff: /* ID. */ @@ -1024,7 +1563,8 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x180) + NVIC_FIRST_IRQ; for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].enabled = setval; } } @@ -1041,7 +1581,8 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x280) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].pending = setval; } } @@ -1053,14 +1594,22 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + if (attrs.secure || s->itns[startvec + i]) { + set_prio(s, startvec + i, false, (value >> (i * 8)) & 0xff); + } } nvic_irq_update(s); return MEMTX_OK; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ for (i = 0; i < size; i++) { unsigned hdlidx = (offset - 0xd14) + i; - set_prio(s, hdlidx, (value >> (i * 8)) & 0xff); + int newprio = extract32(value, i * 8, 8); + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + set_prio(s, hdlidx, sbank, newprio); } nvic_irq_update(s); return MEMTX_OK; @@ -1126,9 +1675,12 @@ static int nvic_post_load(void *opaque, int version_id) { NVICState *s = opaque; unsigned i; + int resetprio; /* Check for out of range priority settings */ - if (s->vectors[ARMV7M_EXCP_RESET].prio != -3 || + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + + if (s->vectors[ARMV7M_EXCP_RESET].prio != resetprio || s->vectors[ARMV7M_EXCP_NMI].prio != -2 || s->vectors[ARMV7M_EXCP_HARD].prio != -1) { return 1; @@ -1158,6 +1710,50 @@ static const VMStateDescription vmstate_VecInfo = { } }; +static bool nvic_security_needed(void *opaque) +{ + NVICState *s = opaque; + + return arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); +} + +static int nvic_security_post_load(void *opaque, int version_id) +{ + NVICState *s = opaque; + int i; + + /* Check for out of range priority settings */ + if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1 + && s->sec_vectors[ARMV7M_EXCP_HARD].prio != -3) { + /* We can't cross-check against AIRCR.BFHFNMINS as we don't know + * if the CPU state has been migrated yet; a mismatch won't + * cause the emulation to blow up, though. + */ + return 1; + } + for (i = ARMV7M_EXCP_MEM; i < ARRAY_SIZE(s->sec_vectors); i++) { + if (s->sec_vectors[i].prio & ~0xff) { + return 1; + } + } + return 0; +} + +static const VMStateDescription vmstate_nvic_security = { + .name = "nvic/m-security", + .version_id = 1, + .minimum_version_id = 1, + .needed = nvic_security_needed, + .post_load = &nvic_security_post_load, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, + vmstate_VecInfo, VecInfo), + VMSTATE_UINT32(prigroup[M_REG_S], NVICState), + VMSTATE_BOOL_ARRAY(itns, NVICState, NVIC_MAX_VECTORS), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", .version_id = 4, @@ -1166,8 +1762,12 @@ static const VMStateDescription vmstate_nvic = { .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(prigroup, NVICState), + VMSTATE_UINT32(prigroup[M_REG_NS], NVICState), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription*[]) { + &vmstate_nvic_security, + NULL } }; @@ -1179,10 +1779,10 @@ static Property props_nvic[] = { static void armv7m_nvic_reset(DeviceState *dev) { + int resetprio; NVICState *s = NVIC(dev); s->vectors[ARMV7M_EXCP_NMI].enabled = 1; - s->vectors[ARMV7M_EXCP_HARD].enabled = 1; /* MEM, BUS, and USAGE are enabled through * the System Handler Control register */ @@ -1191,10 +1791,25 @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectors[ARMV7M_EXCP_PENDSV].enabled = 1; s->vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; - s->vectors[ARMV7M_EXCP_RESET].prio = -3; + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + s->vectors[ARMV7M_EXCP_RESET].prio = resetprio; s->vectors[ARMV7M_EXCP_NMI].prio = -2; s->vectors[ARMV7M_EXCP_HARD].prio = -1; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + s->sec_vectors[ARMV7M_EXCP_HARD].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SVC].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_PENDSV].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; + + /* AIRCR.BFHFNMINS resets to 0 so Secure HF is priority -1 (R_CMTC) */ + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + /* If AIRCR.BFHFNMINS is 0 then NS HF is (effectively) disabled */ + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; + } else { + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; + } + /* Strictly speaking the reset handler should be enabled. * However, we don't simulate soft resets through the NVIC, * and the reset vector should never be pended. @@ -1203,6 +1818,22 @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; + s->vectpending_is_s_banked = false; + s->vectpending_prio = NVIC_NOEXC_PRIO; + + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + memset(s->itns, 0, sizeof(s->itns)); + } else { + /* This state is constant and not guest accessible in a non-security + * NVIC; we set the bits to true to avoid having to do a feature + * bit check in the NVIC enable/pend/etc register accessors. + */ + int i; + + for (i = NVIC_FIRST_IRQ; i < ARRAY_SIZE(s->itns); i++) { + s->itns[i] = true; + } + } } static void nvic_systick_trigger(void *opaque, int n, int level) @@ -1213,8 +1844,10 @@ static void nvic_systick_trigger(void *opaque, int n, int level) /* SysTick just asked us to pend its exception. * (This is different from an external interrupt line's * behaviour.) + * TODO: when we implement the banked systicks we must make + * this pend the correct banked exception. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, false); } } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index 4762329482..b86f242b0f 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -167,16 +167,17 @@ gicv3_redist_set_irq(uint32_t cpu, int irq, int level) "GICv3 redistributor 0x%x gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending SGI %d" # hw/intc/armv7m_nvic.c -nvic_recompute_state(int vectpending, int exception_prio) "NVIC state recomputed: vectpending %d exception_prio %d" -nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" +nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" +nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d" +nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -nvic_set_pending(int irq, int en, int prio) "NVIC set pending irq %d (enabled: %d priority %d)" -nvic_clear_pending(int irq, int en, int prio) "NVIC clear pending irq %d (enabled: %d priority %d)" +nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" +nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" -nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" -nvic_complete_irq(int irq) "NVIC complete IRQ %d" +nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" +nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)" nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |