diff options
Diffstat (limited to 'hw/pci/shpc.c')
| -rw-r--r-- | hw/pci/shpc.c | 124 |
1 files changed, 77 insertions, 47 deletions
diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c index 576244b9f6..180faa7adb 100644 --- a/hw/pci/shpc.c +++ b/hw/pci/shpc.c @@ -7,6 +7,7 @@ #include "hw/pci/pci.h" #include "hw/pci/pci_bus.h" #include "hw/pci/msi.h" +#include "qapi/qmp/qerror.h" /* TODO: model power only and disabled slot states. */ /* TODO: handle SERR and wakeups */ @@ -490,65 +491,93 @@ static const MemoryRegionOps shpc_mmio_ops = { .max_access_size = 4, }, }; - -static int shpc_device_hotplug(DeviceState *qdev, PCIDevice *affected_dev, - PCIHotplugState hotplug_state) +static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot, + SHPCDevice *shpc, Error **errp) { int pci_slot = PCI_SLOT(affected_dev->devfn); - uint8_t state; - uint8_t led; - PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev); - SHPCDevice *shpc = d->shpc; - int slot = SHPC_PCI_TO_IDX(pci_slot); - if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) { - error_report("Unsupported PCI slot %d for standard hotplug " - "controller. Valid slots are between %d and %d.", - pci_slot, SHPC_IDX_TO_PCI(0), - SHPC_IDX_TO_PCI(shpc->nslots) - 1); - return -1; + *slot = SHPC_PCI_TO_IDX(pci_slot); + + if (pci_slot < SHPC_IDX_TO_PCI(0) || *slot >= shpc->nslots) { + error_setg(errp, "Unsupported PCI slot %d for standard hotplug " + "controller. Valid slots are between %d and %d.", + pci_slot, SHPC_IDX_TO_PCI(0), + SHPC_IDX_TO_PCI(shpc->nslots) - 1); + return; + } +} + +void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, + Error **errp) +{ + Error *local_err = NULL; + PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev); + SHPCDevice *shpc = pci_hotplug_dev->shpc; + int slot; + + shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; } + /* Don't send event when device is enabled during qemu machine creation: * it is present on boot, no hotplug event is necessary. We do send an * event when the device is disabled later. */ - if (hotplug_state == PCI_COLDPLUG_ENABLED) { + if (!dev->hotplugged) { shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN); shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W, SHPC_SLOT_STATUS_PRSNT_MASK); - return 0; + return; } - if (hotplug_state == PCI_HOTPLUG_DISABLED) { - shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON; - state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK); - led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK); - if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) { - shpc_free_devices_in_slot(shpc, slot); - shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN); - shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY, - SHPC_SLOT_STATUS_PRSNT_MASK); - shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= - SHPC_SLOT_EVENT_MRL | - SHPC_SLOT_EVENT_PRESENCE; - } + + /* This could be a cancellation of the previous removal. + * We check MRL state to figure out. */ + if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) { + shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN); + shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W, + SHPC_SLOT_STATUS_PRSNT_MASK); + shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= + SHPC_SLOT_EVENT_BUTTON | + SHPC_SLOT_EVENT_MRL | + SHPC_SLOT_EVENT_PRESENCE; } else { - /* This could be a cancellation of the previous removal. - * We check MRL state to figure out. */ - if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) { - shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN); - shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W, - SHPC_SLOT_STATUS_PRSNT_MASK); - shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= - SHPC_SLOT_EVENT_BUTTON | - SHPC_SLOT_EVENT_MRL | - SHPC_SLOT_EVENT_PRESENCE; - } else { - /* Press attention button to cancel removal */ - shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= - SHPC_SLOT_EVENT_BUTTON; - } + /* Press attention button to cancel removal */ + shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= + SHPC_SLOT_EVENT_BUTTON; } shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66); - shpc_interrupt_update(d); - return 0; + shpc_interrupt_update(pci_hotplug_dev); +} + +void shpc_device_hot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, + Error **errp) +{ + Error *local_err = NULL; + PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev); + SHPCDevice *shpc = pci_hotplug_dev->shpc; + uint8_t state; + uint8_t led; + int slot; + + shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, errp); + if (local_err) { + return; + } + + shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON; + state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK); + led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK); + if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) { + shpc_free_devices_in_slot(shpc, slot); + shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN); + shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY, + SHPC_SLOT_STATUS_PRSNT_MASK); + shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= + SHPC_SLOT_EVENT_MRL | + SHPC_SLOT_EVENT_PRESENCE; + } + shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66); + shpc_interrupt_update(pci_hotplug_dev); } /* Initialize the SHPC structure in bridge's BAR. */ @@ -616,7 +645,8 @@ int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset) d, "shpc-mmio", SHPC_SIZEOF(d)); shpc_cap_update_dword(d); memory_region_add_subregion(bar, offset, &shpc->mmio); - pci_bus_hotplug(sec_bus, shpc_device_hotplug, &d->qdev); + + qbus_set_hotplug_handler(BUS(sec_bus), DEVICE(d), NULL); d->cap_present |= QEMU_PCI_CAP_SHPC; return 0; |