diff options
Diffstat (limited to 'hw/scsi/scsi-disk.c')
| -rw-r--r-- | hw/scsi/scsi-disk.c | 39 |
1 files changed, 30 insertions, 9 deletions
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index f5ab767ab5..ded23d36ca 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -714,10 +714,12 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) /* min_io_size and opt_io_size can't be greater than * max_io_sectors */ - min_io_size = - MIN_NON_ZERO(min_io_size, max_io_sectors); - opt_io_size = - MIN_NON_ZERO(opt_io_size, max_io_sectors); + if (min_io_size) { + min_io_size = MIN(min_io_size, max_io_sectors); + } + if (opt_io_size) { + opt_io_size = MIN(opt_io_size, max_io_sectors); + } } /* required VPD size with unmap support */ buflen = 0x40; @@ -823,7 +825,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) * block characteristics VPD page by default. Not all of SPC-3 * is actually implemented, but we're good enough. */ - outbuf[2] = 5; + outbuf[2] = s->qdev.default_scsi_version; outbuf[3] = 2 | 0x10; /* Format 2, HiSup */ if (buflen > 36) { @@ -2191,7 +2193,11 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf) case READ_12: case READ_16: DPRINTF("Read (sector %" PRId64 ", count %u)\n", r->req.cmd.lba, len); - if (r->req.cmd.buf[1] & 0xe0) { + /* Protection information is not supported. For SCSI versions 2 and + * older (as determined by snooping the guest's INQUIRY commands), + * there is no RD/WR/VRPROTECT, so skip this check in these versions. + */ + if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { goto illegal_request; } if (!check_lba_range(s, r->req.cmd.lba, len)) { @@ -2222,7 +2228,7 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf) * As far as DMA is concerned, we can treat it the same as a write; * scsi_block_do_sgio will send VERIFY commands. */ - if (r->req.cmd.buf[1] & 0xe0) { + if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { goto illegal_request; } if (!check_lba_range(s, r->req.cmd.lba, len)) { @@ -2268,6 +2274,8 @@ static void scsi_disk_reset(DeviceState *dev) /* reset tray statuses */ s->tray_locked = 0; s->tray_open = 0; + + s->qdev.scsi_version = s->qdev.default_scsi_version; } static void scsi_disk_resize_cb(void *opaque) @@ -2812,6 +2820,8 @@ static bool scsi_block_is_passthrough(SCSIDiskState *s, uint8_t *buf) static int32_t scsi_block_dma_command(SCSIRequest *req, uint8_t *buf) { SCSIBlockReq *r = (SCSIBlockReq *)req; + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); + r->cmd = req->cmd.buf[0]; switch (r->cmd >> 5) { case 0: @@ -2837,8 +2847,11 @@ static int32_t scsi_block_dma_command(SCSIRequest *req, uint8_t *buf) abort(); } - if (r->cdb1 & 0xe0) { - /* Protection information is not supported. */ + /* Protection information is not supported. For SCSI versions 2 and + * older (as determined by snooping the guest's INQUIRY commands), + * there is no RD/WR/VRPROTECT, so skip this check in these versions. + */ + if (s->qdev.scsi_version > 2 && (req->cmd.buf[1] & 0xe0)) { scsi_check_condition(&r->req, SENSE_CODE(INVALID_FIELD)); return 0; } @@ -2950,6 +2963,8 @@ static Property scsi_hd_properties[] = { DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, DEFAULT_MAX_IO_SIZE), DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), + DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, + 5), DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf), DEFINE_PROP_END_OF_LIST(), }; @@ -2995,6 +3010,8 @@ static Property scsi_cd_properties[] = { DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0), DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, DEFAULT_MAX_IO_SIZE), + DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, + 5), DEFINE_PROP_END_OF_LIST(), }; @@ -3023,6 +3040,8 @@ static Property scsi_block_properties[] = { DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk), DEFINE_PROP_BOOL("share-rw", SCSIDiskState, qdev.conf.share_rw, false), DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), + DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, + -1), DEFINE_PROP_END_OF_LIST(), }; @@ -3063,6 +3082,8 @@ static Property scsi_disk_properties[] = { DEFAULT_MAX_UNMAP_SIZE), DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, DEFAULT_MAX_IO_SIZE), + DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, + 5), DEFINE_PROP_END_OF_LIST(), }; |