diff options
Diffstat (limited to 'hw/sd/sdhci.c')
| -rw-r--r-- | hw/sd/sdhci.c | 231 |
1 files changed, 229 insertions, 2 deletions
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index fac7fa5c72..ee95e78aeb 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -32,7 +32,6 @@ #include "qemu/bitops.h" #include "hw/sd/sdhci.h" #include "sdhci-internal.h" -#include "qapi/error.h" #include "qemu/log.h" #include "trace.h" @@ -244,7 +243,8 @@ static void sdhci_send_command(SDHCIState *s) } } - if ((s->norintstsen & SDHC_NISEN_TRSCMP) && + if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && + (s->norintstsen & SDHC_NISEN_TRSCMP) && (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { s->norintsts |= SDHC_NIS_TRSCMP; } @@ -1189,6 +1189,8 @@ static void sdhci_initfn(SDHCIState *s) s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s); + + s->io_ops = &sdhci_mmio_ops; } static void sdhci_uninitfn(SDHCIState *s) @@ -1396,6 +1398,10 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) } sysbus_init_irq(sbd, &s->irq); + + memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci", + SDHC_REGISTERS_MAP_SIZE); + sysbus_init_mmio(sbd, &s->iomem); } @@ -1447,11 +1453,232 @@ static const TypeInfo sdhci_bus_info = { .class_init = sdhci_bus_class_init, }; +static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint32_t ret; + uint16_t hostctl; + + switch (offset) { + default: + return sdhci_read(opaque, offset, size); + + case SDHC_HOSTCTL: + /* + * For a detailed explanation on the following bit + * manipulation code see comments in a similar part of + * usdhc_write() + */ + hostctl = SDHC_DMA_TYPE(s->hostctl) << (8 - 3); + + if (s->hostctl & SDHC_CTRL_8BITBUS) { + hostctl |= ESDHC_CTRL_8BITBUS; + } + + if (s->hostctl & SDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + ret = hostctl; + ret |= (uint32_t)s->blkgap << 16; + ret |= (uint32_t)s->wakcon << 24; + + break; + + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_VENDOR_SPEC: + case ESDHC_MIX_CTRL: + case ESDHC_WTMK_LVL: + ret = 0; + break; + } + + return ret; +} + +static void +usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint8_t hostctl; + uint32_t value = (uint32_t)val; + + switch (offset) { + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_WTMK_LVL: + case ESDHC_VENDOR_SPEC: + break; + + case SDHC_HOSTCTL: + /* + * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL) + * + * 7 6 5 4 3 2 1 0 + * |-----------+--------+--------+-----------+----------+---------| + * | Card | Card | Endian | DATA3 | Data | Led | + * | Detect | Detect | Mode | as Card | Transfer | Control | + * | Signal | Test | | Detection | Width | | + * | Selection | Level | | Pin | | | + * |-----------+--------+--------+-----------+----------+---------| + * + * and 0x29 + * + * 15 10 9 8 + * |----------+------| + * | Reserved | DMA | + * | | Sel. | + * | | | + * |----------+------| + * + * and here's what SDCHI spec expects those offsets to be: + * + * 0x28 (Host Control Register) + * + * 7 6 5 4 3 2 1 0 + * |--------+--------+----------+------+--------+----------+---------| + * | Card | Card | Extended | DMA | High | Data | LED | + * | Detect | Detect | Data | Sel. | Speed | Transfer | Control | + * | Signal | Test | Transfer | | Enable | Width | | + * | Sel. | Level | Width | | | | | + * |--------+--------+----------+------+--------+----------+---------| + * + * and 0x29 (Power Control Register) + * + * |----------------------------------| + * | Power Control Register | + * | | + * | Description omitted, | + * | since it has no analog in ESDHCI | + * | | + * |----------------------------------| + * + * Since offsets 0x2A and 0x2B should be compatible between + * both IP specs we only need to reconcile least 16-bit of the + * word we've been given. + */ + + /* + * First, save bits 7 6 and 0 since they are identical + */ + hostctl = value & (SDHC_CTRL_LED | + SDHC_CTRL_CDTEST_INS | + SDHC_CTRL_CDTEST_EN); + /* + * Second, split "Data Transfer Width" from bits 2 and 1 in to + * bits 5 and 1 + */ + if (value & ESDHC_CTRL_8BITBUS) { + hostctl |= SDHC_CTRL_8BITBUS; + } + + if (value & ESDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + /* + * Third, move DMA select from bits 9 and 8 to bits 4 and 3 + */ + hostctl |= SDHC_DMA_TYPE(value >> (8 - 3)); + + /* + * Now place the corrected value into low 16-bit of the value + * we are going to give standard SDHCI write function + * + * NOTE: This transformation should be the inverse of what can + * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux + * kernel + */ + value &= ~UINT16_MAX; + value |= hostctl; + value |= (uint16_t)s->pwrcon << 8; + + sdhci_write(opaque, offset, value, size); + break; + + case ESDHC_MIX_CTRL: + /* + * So, when SD/MMC stack in Linux tries to write to "Transfer + * Mode Register", ESDHC i.MX quirk code will translate it + * into a write to ESDHC_MIX_CTRL, so we do the opposite in + * order to get where we started + * + * Note that Auto CMD23 Enable bit is located in a wrong place + * on i.MX, but since it is not used by QEMU we do not care. + * + * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...) + * here becuase it will result in a call to + * sdhci_send_command(s) which we don't want. + * + */ + s->trnmod = value & UINT16_MAX; + break; + case SDHC_TRNMOD: + /* + * Similar to above, but this time a write to "Command + * Register" will be translated into a 4-byte write to + * "Transfer Mode register" where lower 16-bit of value would + * be set to zero. So what we do is fill those bits with + * cached value from s->trnmod and let the SDHCI + * infrastructure handle the rest + */ + sdhci_write(opaque, offset, val | s->trnmod, size); + break; + case SDHC_BLKSIZE: + /* + * ESDHCI does not implement "Host SDMA Buffer Boundary", and + * Linux driver will try to zero this field out which will + * break the rest of SDHCI emulation. + * + * Linux defaults to maximum possible setting (512K boundary) + * and it seems to be the only option that i.MX IP implements, + * so we artificially set it to that value. + */ + val |= 0x7 << 12; + /* FALLTHROUGH */ + default: + sdhci_write(opaque, offset, val, size); + break; + } +} + + +static const MemoryRegionOps usdhc_mmio_ops = { + .read = usdhc_read, + .write = usdhc_write, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void imx_usdhc_init(Object *obj) +{ + SDHCIState *s = SYSBUS_SDHCI(obj); + + s->io_ops = &usdhc_mmio_ops; + s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ; +} + +static const TypeInfo imx_usdhc_info = { + .name = TYPE_IMX_USDHC, + .parent = TYPE_SYSBUS_SDHCI, + .instance_init = imx_usdhc_init, +}; + static void sdhci_register_types(void) { type_register_static(&sdhci_pci_info); type_register_static(&sdhci_sysbus_info); type_register_static(&sdhci_bus_info); + type_register_static(&imx_usdhc_info); } type_init(sdhci_register_types) |