diff options
Diffstat (limited to 'hw/ssd0323.c')
| -rw-r--r-- | hw/ssd0323.c | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/hw/ssd0323.c b/hw/ssd0323.c new file mode 100644 index 0000000000..67361bce2e --- /dev/null +++ b/hw/ssd0323.c @@ -0,0 +1,267 @@ +/* + * SSD0323 OLED controller with OSRAM Pictiva 128x64 display. + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * + * This code is licenced under the GPL. + */ + +/* The controller can support a variety of different displays, but we only + implement one. Most of the commends relating to brightness and geometry + setup are ignored. */ +#include "vl.h" + +//#define DEBUG_SSD0323 1 + +#ifdef DEBUG_SSD0323 +#define DPRINTF(fmt, args...) \ +do { printf("ssd0323: " fmt , ##args); } while (0) +#define BADF(fmt, args...) \ +do { fprintf(stderr, "ssd0323: error: " fmt , ##args); exit(1);} while (0) +#else +#define DPRINTF(fmt, args...) do {} while(0) +#define BADF(fmt, args...) \ +do { fprintf(stderr, "ssd0323: error: " fmt , ##args);} while (0) +#endif + +/* Scaling factor for pixels. */ +#define MAGNIFY 4 + +enum ssd0323_mode +{ + SSD0323_CMD, + SSD0323_DATA +}; + +typedef struct { + DisplayState *ds; + + int cmd_len; + int cmd; + int cmd_data[8]; + int row; + int row_start; + int row_end; + int col; + int col_start; + int col_end; + int redraw; + enum ssd0323_mode mode; + uint8_t framebuffer[128 * 80 / 2]; +} ssd0323_state; + +int ssd0323_xfer_ssi(void *opaque, int data) +{ + ssd0323_state *s = (ssd0323_state *)opaque; + switch (s->mode) { + case SSD0323_DATA: + DPRINTF("data 0x%02x\n", data); + s->framebuffer[s->col + s->row * 64] = data; + s->col++; + if (s->col > s->col_end) { + s->row++; + s->col = s->col_start; + } + if (s->row > s->row_end) { + s->row = s->row_start; + } + s->redraw = 1; + break; + case SSD0323_CMD: + DPRINTF("cmd 0x%02x\n", data); + if (s->cmd_len == 0) { + s->cmd = data; + } else { + s->cmd_data[s->cmd_len - 1] = data; + } + s->cmd_len++; + switch (s->cmd) { +#define DATA(x) if (s->cmd_len <= (x)) return 0 + case 0x15: /* Set column. */ + DATA(2); + s->col_start = s->cmd_data[0] % 64; + s->col_end = s->cmd_data[1] % 64; + break; + case 0x75: /* Set row. */ + DATA(2); + s->row_start = s->cmd_data[0] % 80; + s->row_end = s->cmd_data[1] % 80; + break; + case 0x81: /* Set contrast */ + DATA(1); + break; + case 0x84: case 0x85: case 0x86: /* Max current. */ + DATA(0); + break; + case 0xa0: /* Set remapping. */ + /* FIXME: Implement this. */ + DATA(1); + break; + case 0xa1: /* Set display start line. */ + case 0xa2: /* Set display offset. */ + /* FIXME: Implement these. */ + DATA(1); + break; + case 0xa4: /* Normal mode. */ + case 0xa5: /* All on. */ + case 0xa6: /* All off. */ + case 0xa7: /* Inverse. */ + /* FIXME: Implement these. */ + DATA(0); + break; + case 0xa8: /* Set multiplex ratio. */ + case 0xad: /* Set DC-DC converter. */ + DATA(1); + /* Ignored. Don't care. */ + break; + case 0xae: /* Display off. */ + case 0xaf: /* Display on. */ + DATA(0); + /* TODO: Implement power control. */ + break; + case 0xb1: /* Set phase length. */ + case 0xb2: /* Set row period. */ + case 0xb3: /* Set clock rate. */ + case 0xbc: /* Set precharge. */ + case 0xbe: /* Set VCOMH. */ + case 0xbf: /* Set segment low. */ + DATA(1); + /* Ignored. Don't care. */ + break; + case 0xb8: /* Set grey scale table. */ + /* FIXME: Implement this. */ + DATA(8); + break; + case 0xe3: /* NOP. */ + DATA(0); + break; + default: + BADF("Unknown command: 0x%x\n", data); + } + s->cmd_len = 0; + return 0; + } + return 0; +} + +static void ssd0323_update_display(void *opaque) +{ + ssd0323_state *s = (ssd0323_state *)opaque; + uint8_t *dest; + uint8_t *src; + int x; + int y; + int i; + int line; + char *colors[16]; + char colortab[MAGNIFY * 64]; + char *p; + int dest_width; + + if (s->redraw) { + switch (s->ds->depth) { + case 0: + return; + case 15: + dest_width = 2; + break; + case 16: + dest_width = 2; + break; + case 24: + dest_width = 3; + break; + case 32: + dest_width = 4; + break; + default: + BADF("Bad color depth\n"); + return; + } + p = colortab; + for (i = 0; i < 16; i++) { + int n; + colors[i] = p; + switch (s->ds->depth) { + case 15: + n = i * 2 + (i >> 3); + p[0] = n | (n << 5); + p[1] = (n << 2) | (n >> 3); + break; + case 16: + n = i * 2 + (i >> 3); + p[0] = n | (n << 6) | ((n << 1) & 0x20); + p[1] = (n << 3) | (n >> 2); + break; + case 24: + case 32: + n = (i << 4) | i; + p[0] = p[1] = p[2] = n; + break; + default: + BADF("Bad color depth\n"); + return; + } + p += dest_width; + } + dest = s->ds->data; + for (y = 0; y < 64; y++) { + line = y; + src = s->framebuffer + 64 * line; + for (x = 0; x < 64; x++) { + int val; + val = *src >> 4; + for (i = 0; i < MAGNIFY; i++) { + memcpy(dest, colors[val], dest_width); + dest += dest_width; + } + val = *src & 0xf; + for (i = 0; i < MAGNIFY; i++) { + memcpy(dest, colors[val], dest_width); + dest += dest_width; + } + src++; + } + for (i = 1; i < MAGNIFY; i++) { + memcpy(dest, dest - dest_width * MAGNIFY * 128, + dest_width * 128 * MAGNIFY); + dest += dest_width * 128 * MAGNIFY; + } + } + } + dpy_update(s->ds, 0, 0, 128 * MAGNIFY, 64 * MAGNIFY); +} + +static void ssd0323_invalidate_display(void * opaque) +{ + ssd0323_state *s = (ssd0323_state *)opaque; + s->redraw = 1; +} + +/* Command/data input. */ +static void ssd0323_cd(void *opaque, int n, int level) +{ + ssd0323_state *s = (ssd0323_state *)opaque; + DPRINTF("%s mode\n", level ? "Data" : "Command"); + s->mode = level ? SSD0323_DATA : SSD0323_CMD; +} + +void *ssd0323_init(DisplayState *ds, qemu_irq *cmd_p) +{ + ssd0323_state *s; + qemu_irq *cmd; + + s = (ssd0323_state *)qemu_mallocz(sizeof(ssd0323_state)); + s->ds = ds; + graphic_console_init(ds, ssd0323_update_display, ssd0323_invalidate_display, + NULL, s); + dpy_resize(s->ds, 128 * MAGNIFY, 64 * MAGNIFY); + s->col_end = 63; + s->row_end = 79; + + cmd = qemu_allocate_irqs(ssd0323_cd, s, 1); + *cmd_p = *cmd; + + return s; +} |