diff options
Diffstat (limited to 'hw/vfio')
| -rw-r--r-- | hw/vfio/pci-quirks.c | 65 | ||||
| -rw-r--r-- | hw/vfio/pci.c | 37 |
2 files changed, 64 insertions, 38 deletions
diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c index e9b493b939..e995e32dee 100644 --- a/hw/vfio/pci-quirks.c +++ b/hw/vfio/pci-quirks.c @@ -1367,14 +1367,45 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) uint16_t cmd_orig, cmd; Error *err = NULL; + /* This must be an Intel VGA device. */ + if (!vfio_pci_is(vdev, PCI_VENDOR_ID_INTEL, PCI_ANY_ID) || + !vfio_is_vga(vdev) || nr != 4) { + return; + } + /* - * This must be an Intel VGA device at address 00:02.0 for us to even - * consider enabling legacy mode. The vBIOS has dependencies on the - * PCI bus address. + * IGD is not a standard, they like to change their specs often. We + * only attempt to support back to SandBridge and we hope that newer + * devices maintain compatibility with generation 8. */ - if (!vfio_pci_is(vdev, PCI_VENDOR_ID_INTEL, PCI_ANY_ID) || - !vfio_is_vga(vdev) || nr != 4 || - &vdev->pdev != pci_find_device(pci_device_root_bus(&vdev->pdev), + gen = igd_gen(vdev); + if (gen != 6 && gen != 8) { + error_report("IGD device %s is unsupported by IGD quirks, " + "try SandyBridge or newer", vdev->vbasedev.name); + return; + } + + /* + * Regardless of running in UPT or legacy mode, the guest graphics + * driver may attempt to use stolen memory, however only legacy mode + * has BIOS support for reserving stolen memory in the guest VM. + * Emulate the GMCH register in all cases and zero out the stolen + * memory size here. Legacy mode may request allocation and re-write + * this below. + */ + gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, 4); + gmch &= ~((gen < 8 ? 0x1f : 0xff) << (gen < 8 ? 3 : 8)); + + /* GMCH is read-only, emulated */ + pci_set_long(vdev->pdev.config + IGD_GMCH, gmch); + pci_set_long(vdev->pdev.wmask + IGD_GMCH, 0); + pci_set_long(vdev->emulated_config_bits + IGD_GMCH, ~0); + + /* + * This must be at address 00:02.0 for us to even onsider enabling + * legacy mode. The vBIOS has dependencies on the PCI bus address. + */ + if (&vdev->pdev != pci_find_device(pci_device_root_bus(&vdev->pdev), 0, PCI_DEVFN(0x2, 0))) { return; } @@ -1394,18 +1425,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) } /* - * IGD is not a standard, they like to change their specs often. We - * only attempt to support back to SandBridge and we hope that newer - * devices maintain compatibility with generation 8. - */ - gen = igd_gen(vdev); - if (gen != 6 && gen != 8) { - error_report("IGD device %s is unsupported in legacy mode, " - "try SandyBridge or newer", vdev->vbasedev.name); - return; - } - - /* * Most of what we're doing here is to enable the ROM to run, so if * there's no ROM, there's no point in setting up this quirk. * NB. We only seem to get BIOS ROMs, so a UEFI VM would need CSM support. @@ -1460,8 +1479,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) goto out; } - gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, 4); - /* * If IGD VGA Disable is clear (expected) and VGA is not already enabled, * try to enable it. Probably shouldn't be using legacy mode without VGA, @@ -1532,12 +1549,11 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) * when IVD (IGD VGA Disable) is clear, but the claim is that it's unused, * so let's not waste VM memory for it. */ - gmch &= ~((gen < 8 ? 0x1f : 0xff) << (gen < 8 ? 3 : 8)); - if (vdev->igd_gms) { if (vdev->igd_gms <= 0x10) { gms_mb = vdev->igd_gms * 32; gmch |= vdev->igd_gms << (gen < 8 ? 3 : 8); + pci_set_long(vdev->pdev.config + IGD_GMCH, gmch); } else { error_report("Unsupported IGD GMS value 0x%x", vdev->igd_gms); vdev->igd_gms = 0; @@ -1557,11 +1573,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr) fw_cfg_add_file(fw_cfg_find(), "etc/igd-bdsm-size", bdsm_size, sizeof(*bdsm_size)); - /* GMCH is read-only, emulated */ - pci_set_long(vdev->pdev.config + IGD_GMCH, gmch); - pci_set_long(vdev->pdev.wmask + IGD_GMCH, 0); - pci_set_long(vdev->emulated_config_bits + IGD_GMCH, ~0); - /* BDSM is read-write, emulated. The BIOS needs to be able to write it */ pci_set_long(vdev->pdev.config + IGD_BDSM, 0); pci_set_long(vdev->pdev.wmask + IGD_BDSM, ~0); diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c index 332f41d662..03a3d01549 100644 --- a/hw/vfio/pci.c +++ b/hw/vfio/pci.c @@ -1880,16 +1880,26 @@ static void vfio_add_ext_cap(VFIOPCIDevice *vdev) /* * Extended capabilities are chained with each pointing to the next, so we * can drop anything other than the head of the chain simply by modifying - * the previous next pointer. For the head of the chain, we can modify the - * capability ID to something that cannot match a valid capability. ID - * 0 is reserved for this since absence of capabilities is indicated by - * 0 for the ID, version, AND next pointer. However, pcie_add_capability() - * uses ID 0 as reserved for list management and will incorrectly match and - * assert if we attempt to pre-load the head of the chain with this ID. - * Use ID 0xFFFF temporarily since it is also seems to be reserved in - * part for identifying absence of capabilities in a root complex register - * block. If the ID still exists after adding capabilities, switch back to - * zero. We'll mark this entire first dword as emulated for this purpose. + * the previous next pointer. Seed the head of the chain here such that + * we can simply skip any capabilities we want to drop below, regardless + * of their position in the chain. If this stub capability still exists + * after we add the capabilities we want to expose, update the capability + * ID to zero. Note that we cannot seed with the capability header being + * zero as this conflicts with definition of an absent capability chain + * and prevents capabilities beyond the head of the list from being added. + * By replacing the dummy capability ID with zero after walking the device + * chain, we also transparently mark extended capabilities as absent if + * no capabilities were added. Note that the PCIe spec defines an absence + * of extended capabilities to be determined by a value of zero for the + * capability ID, version, AND next pointer. A non-zero next pointer + * should be sufficient to indicate additional capabilities are present, + * which will occur if we call pcie_add_capability() below. The entire + * first dword is emulated to support this. + * + * NB. The kernel side does similar masking, so be prepared that our + * view of the device may also contain a capability ID zero in the head + * of the chain. Skip it for the same reason that we cannot seed the + * chain with a zero capability. */ pci_set_long(pdev->config + PCI_CONFIG_SPACE_SIZE, PCI_EXT_CAP(0xFFFF, 0, 0)); @@ -1915,6 +1925,7 @@ static void vfio_add_ext_cap(VFIOPCIDevice *vdev) PCI_EXT_CAP_NEXT_MASK); switch (cap_id) { + case 0: /* kernel masked capability */ case PCI_EXT_CAP_ID_SRIOV: /* Read-only VF BARs confuse OVMF */ case PCI_EXT_CAP_ID_ARI: /* XXX Needs next function virtualization */ trace_vfio_add_ext_cap_dropped(vdev->vbasedev.name, cap_id, next); @@ -2506,12 +2517,16 @@ static void vfio_unregister_err_notifier(VFIOPCIDevice *vdev) static void vfio_req_notifier_handler(void *opaque) { VFIOPCIDevice *vdev = opaque; + Error *err = NULL; if (!event_notifier_test_and_clear(&vdev->req_notifier)) { return; } - qdev_unplug(&vdev->pdev.qdev, NULL); + qdev_unplug(&vdev->pdev.qdev, &err); + if (err) { + error_reportf_err(err, WARN_PREFIX, vdev->vbasedev.name); + } } static void vfio_register_req_notifier(VFIOPCIDevice *vdev) |