diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/misc/vfio.c | 627 |
1 files changed, 518 insertions, 109 deletions
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c index a1c08fb74e..a2d5283ff9 100644 --- a/hw/misc/vfio.c +++ b/hw/misc/vfio.c @@ -119,6 +119,7 @@ typedef struct VFIOINTx { typedef struct VFIOMSIVector { EventNotifier interrupt; /* eventfd triggered on interrupt */ struct VFIODevice *vdev; /* back pointer to device */ + MSIMessage msg; /* cache the MSI message so we know when it changes */ int virq; /* KVM irqchip route for QEMU bypass */ bool use; } VFIOMSIVector; @@ -165,6 +166,7 @@ typedef struct VFIODevice { off_t config_offset; /* Offset of config space region within device fd */ unsigned int rom_size; off_t rom_offset; /* Offset of ROM region within device fd */ + void *rom; int msi_cap_size; VFIOMSIVector *msi_vectors; VFIOMSIXInfo *msix; @@ -184,6 +186,9 @@ typedef struct VFIODevice { bool reset_works; bool has_vga; bool pci_aer; + bool has_flr; + bool has_pm_reset; + bool needs_reset; } VFIODevice; typedef struct VFIOGroup { @@ -795,7 +800,6 @@ retry: vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(VFIOMSIVector)); for (i = 0; i < vdev->nr_vectors; i++) { - MSIMessage msg; VFIOMSIVector *vector = &vdev->msi_vectors[i]; vector->vdev = vdev; @@ -805,13 +809,13 @@ retry: error_report("vfio: Error: event_notifier_init failed"); } - msg = msi_get_message(&vdev->pdev, i); + vector->msg = msi_get_message(&vdev->pdev, i); /* * Attempt to enable route through KVM irqchip, * default to userspace handling if unavailable. */ - vector->virq = kvm_irqchip_add_msi_route(kvm_state, msg); + vector->virq = kvm_irqchip_add_msi_route(kvm_state, vector->msg); if (vector->virq < 0 || kvm_irqchip_add_irqfd_notifier(kvm_state, &vector->interrupt, NULL, vector->virq) < 0) { @@ -917,6 +921,33 @@ static void vfio_disable_msi(VFIODevice *vdev) vdev->host.bus, vdev->host.slot, vdev->host.function); } +static void vfio_update_msi(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < vdev->nr_vectors; i++) { + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + MSIMessage msg; + + if (!vector->use || vector->virq < 0) { + continue; + } + + msg = msi_get_message(&vdev->pdev, i); + + if (msg.address != vector->msg.address || + msg.data != vector->msg.data) { + + DPRINTF("%s(%04x:%02x:%02x.%x) MSI vector %d changed\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, i); + + kvm_irqchip_update_msi_route(kvm_state, vector->virq, msg); + vector->msg = msg; + } + } +} + /* * IO Port/MMIO - Beware of the endians, VFIO is always little endian */ @@ -1029,6 +1060,131 @@ static const MemoryRegionOps vfio_bar_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +static void vfio_pci_load_rom(VFIODevice *vdev) +{ + struct vfio_region_info reg_info = { + .argsz = sizeof(reg_info), + .index = VFIO_PCI_ROM_REGION_INDEX + }; + uint64_t size; + off_t off = 0; + size_t bytes; + + if (ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info)) { + error_report("vfio: Error getting ROM info: %m"); + return; + } + + DPRINTF("Device %04x:%02x:%02x.%x ROM:\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->rom_size = size = reg_info.size; + vdev->rom_offset = reg_info.offset; + + if (!vdev->rom_size) { + return; + } + + vdev->rom = g_malloc(size); + memset(vdev->rom, 0xff, size); + + while (size) { + bytes = pread(vdev->fd, vdev->rom + off, size, vdev->rom_offset + off); + if (bytes == 0) { + break; + } else if (bytes > 0) { + off += bytes; + size -= bytes; + } else { + if (errno == EINTR || errno == EAGAIN) { + continue; + } + error_report("vfio: Error reading device ROM: %m"); + break; + } + } +} + +static uint64_t vfio_rom_read(void *opaque, hwaddr addr, unsigned size) +{ + VFIODevice *vdev = opaque; + uint64_t val = ((uint64_t)1 << (size * 8)) - 1; + + /* Load the ROM lazily when the guest tries to read it */ + if (unlikely(!vdev->rom)) { + vfio_pci_load_rom(vdev); + } + + memcpy(&val, vdev->rom + addr, + (addr < vdev->rom_size) ? MIN(size, vdev->rom_size - addr) : 0); + + DPRINTF("%s(%04x:%02x:%02x.%x, 0x%"HWADDR_PRIx", 0x%x) = 0x%"PRIx64"\n", + __func__, vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, size, val); + + return val; +} + +static void vfio_rom_write(void *opaque, hwaddr addr, + uint64_t data, unsigned size) +{ +} + +static const MemoryRegionOps vfio_rom_ops = { + .read = vfio_rom_read, + .write = vfio_rom_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void vfio_pci_size_rom(VFIODevice *vdev) +{ + uint32_t orig, size = cpu_to_le32((uint32_t)PCI_ROM_ADDRESS_MASK); + off_t offset = vdev->config_offset + PCI_ROM_ADDRESS; + char name[32]; + + if (vdev->pdev.romfile || !vdev->pdev.rom_bar) { + return; + } + + /* + * Use the same size ROM BAR as the physical device. The contents + * will get filled in later when the guest tries to read it. + */ + if (pread(vdev->fd, &orig, 4, offset) != 4 || + pwrite(vdev->fd, &size, 4, offset) != 4 || + pread(vdev->fd, &size, 4, offset) != 4 || + pwrite(vdev->fd, &orig, 4, offset) != 4) { + error_report("%s(%04x:%02x:%02x.%x) failed: %m", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function); + return; + } + + size = ~(le32_to_cpu(size) & PCI_ROM_ADDRESS_MASK) + 1; + + if (!size) { + return; + } + + DPRINTF("%04x:%02x:%02x.%x ROM size 0x%x\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, size); + + snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + memory_region_init_io(&vdev->pdev.rom, OBJECT(vdev), + &vfio_rom_ops, vdev, name, size); + + pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, + PCI_BASE_ADDRESS_SPACE_MEMORY, &vdev->pdev.rom); + + vdev->pdev.has_rom = true; +} + static void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size) { @@ -1834,10 +1990,16 @@ static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr, is_enabled = msi_enabled(pdev); - if (!was_enabled && is_enabled) { - vfio_enable_msi(vdev); - } else if (was_enabled && !is_enabled) { - vfio_disable_msi(vdev); + if (!was_enabled) { + if (is_enabled) { + vfio_enable_msi(vdev); + } + } else { + if (!is_enabled) { + vfio_disable_msi(vdev); + } else { + vfio_update_msi(vdev); + } } } else if (pdev->cap_present & QEMU_PCI_CAP_MSIX && ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) { @@ -1928,7 +2090,8 @@ static void vfio_listener_region_add(MemoryListener *listener, if (vfio_listener_skipped_section(section)) { DPRINTF("SKIPPING region_add %"HWADDR_PRIx" - %"PRIx64"\n", section->offset_within_address_space, - section->offset_within_address_space + section->size - 1); + section->offset_within_address_space + + int128_get64(int128_sub(section->size, int128_one()))); return; } @@ -1973,7 +2136,8 @@ static void vfio_listener_region_del(MemoryListener *listener, if (vfio_listener_skipped_section(section)) { DPRINTF("SKIPPING region_del %"HWADDR_PRIx" - %"PRIx64"\n", section->offset_within_address_space, - section->offset_within_address_space + section->size - 1); + section->offset_within_address_space + + int128_get64(int128_sub(section->size, int128_one()))); return; } @@ -2480,6 +2644,42 @@ static int vfio_setup_pcie_cap(VFIODevice *vdev, int pos, uint8_t size) return pos; } +static void vfio_check_pcie_flr(VFIODevice *vdev, uint8_t pos) +{ + uint32_t cap = pci_get_long(vdev->pdev.config + pos + PCI_EXP_DEVCAP); + + if (cap & PCI_EXP_DEVCAP_FLR) { + DPRINTF("%04x:%02x:%02x.%x Supports FLR via PCIe cap\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + vdev->has_flr = true; + } +} + +static void vfio_check_pm_reset(VFIODevice *vdev, uint8_t pos) +{ + uint16_t csr = pci_get_word(vdev->pdev.config + pos + PCI_PM_CTRL); + + if (!(csr & PCI_PM_CTRL_NO_SOFT_RESET)) { + DPRINTF("%04x:%02x:%02x.%x Supports PM reset\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + vdev->has_pm_reset = true; + } +} + +static void vfio_check_af_flr(VFIODevice *vdev, uint8_t pos) +{ + uint8_t cap = pci_get_byte(vdev->pdev.config + pos + PCI_AF_CAP); + + if ((cap & PCI_AF_CAP_TP) && (cap & PCI_AF_CAP_FLR)) { + DPRINTF("%04x:%02x:%02x.%x Supports FLR via AF cap\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + vdev->has_flr = true; + } +} + static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) { PCIDevice *pdev = &vdev->pdev; @@ -2524,13 +2724,21 @@ static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) ret = vfio_setup_msi(vdev, pos); break; case PCI_CAP_ID_EXP: + vfio_check_pcie_flr(vdev, pos); ret = vfio_setup_pcie_cap(vdev, pos, size); break; case PCI_CAP_ID_MSIX: ret = vfio_setup_msix(vdev, pos); break; case PCI_CAP_ID_PM: + vfio_check_pm_reset(vdev, pos); vdev->pm_cap = pos; + ret = pci_add_capability(pdev, cap_id, pos, size); + break; + case PCI_CAP_ID_AF: + vfio_check_af_flr(vdev, pos); + ret = pci_add_capability(pdev, cap_id, pos, size); + break; default: ret = pci_add_capability(pdev, cap_id, pos, size); break; @@ -2559,49 +2767,277 @@ static int vfio_add_capabilities(VFIODevice *vdev) return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]); } -static int vfio_load_rom(VFIODevice *vdev) +static void vfio_pci_pre_reset(VFIODevice *vdev) { - uint64_t size = vdev->rom_size; - char name[32]; - off_t off = 0, voff = vdev->rom_offset; - ssize_t bytes; - void *ptr; + PCIDevice *pdev = &vdev->pdev; + uint16_t cmd; - /* If loading ROM from file, pci handles it */ - if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) { - return 0; + vfio_disable_interrupts(vdev); + + /* Make sure the device is in D0 */ + if (vdev->pm_cap) { + uint16_t pmcsr; + uint8_t state; + + pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2); + state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (state) { + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + vfio_pci_write_config(pdev, vdev->pm_cap + PCI_PM_CTRL, pmcsr, 2); + /* vfio handles the necessary delay here */ + pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2); + state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (state) { + error_report("vfio: Unable to power on device, stuck in D%d\n", + state); + } + } } - DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, - vdev->host.bus, vdev->host.slot, vdev->host.function); + /* + * Stop any ongoing DMA by disconecting I/O, MMIO, and bus master. + * Also put INTx Disable in known state. + */ + cmd = vfio_pci_read_config(pdev, PCI_COMMAND, 2); + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INTX_DISABLE); + vfio_pci_write_config(pdev, PCI_COMMAND, cmd, 2); +} - snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom", - vdev->host.domain, vdev->host.bus, vdev->host.slot, - vdev->host.function); - memory_region_init_ram(&vdev->pdev.rom, OBJECT(vdev), name, size); - ptr = memory_region_get_ram_ptr(&vdev->pdev.rom); - memset(ptr, 0xff, size); +static void vfio_pci_post_reset(VFIODevice *vdev) +{ + vfio_enable_intx(vdev); +} - while (size) { - bytes = pread(vdev->fd, ptr + off, size, voff + off); - if (bytes == 0) { - break; /* expect that we could get back less than the ROM BAR */ - } else if (bytes > 0) { - off += bytes; - size -= bytes; - } else { - if (errno == EINTR || errno == EAGAIN) { - continue; +static bool vfio_pci_host_match(PCIHostDeviceAddress *host1, + PCIHostDeviceAddress *host2) +{ + return (host1->domain == host2->domain && host1->bus == host2->bus && + host1->slot == host2->slot && host1->function == host2->function); +} + +static int vfio_pci_hot_reset(VFIODevice *vdev, bool single) +{ + VFIOGroup *group; + struct vfio_pci_hot_reset_info *info; + struct vfio_pci_dependent_device *devices; + struct vfio_pci_hot_reset *reset; + int32_t *fds; + int ret, i, count; + bool multi = false; + + DPRINTF("%s(%04x:%02x:%02x.%x) %s\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + single ? "one" : "multi"); + + vfio_pci_pre_reset(vdev); + vdev->needs_reset = false; + + info = g_malloc0(sizeof(*info)); + info->argsz = sizeof(*info); + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_PCI_HOT_RESET_INFO, info); + if (ret && errno != ENOSPC) { + ret = -errno; + if (!vdev->has_pm_reset) { + error_report("vfio: Cannot reset device %04x:%02x:%02x.%x, " + "no available reset mechanism.", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + } + goto out_single; + } + + count = info->count; + info = g_realloc(info, sizeof(*info) + (count * sizeof(*devices))); + info->argsz = sizeof(*info) + (count * sizeof(*devices)); + devices = &info->devices[0]; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_PCI_HOT_RESET_INFO, info); + if (ret) { + ret = -errno; + error_report("vfio: hot reset info failed: %m"); + goto out_single; + } + + DPRINTF("%04x:%02x:%02x.%x: hot reset dependent devices:\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + /* Verify that we have all the groups required */ + for (i = 0; i < info->count; i++) { + PCIHostDeviceAddress host; + VFIODevice *tmp; + + host.domain = devices[i].segment; + host.bus = devices[i].bus; + host.slot = PCI_SLOT(devices[i].devfn); + host.function = PCI_FUNC(devices[i].devfn); + + DPRINTF("\t%04x:%02x:%02x.%x group %d\n", host.domain, + host.bus, host.slot, host.function, devices[i].group_id); + + if (vfio_pci_host_match(&host, &vdev->host)) { + continue; + } + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == devices[i].group_id) { + break; + } + } + + if (!group) { + if (!vdev->has_pm_reset) { + error_report("vfio: Cannot reset device %04x:%02x:%02x.%x, " + "depends on group %d which is not owned.", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, devices[i].group_id); + } + ret = -EPERM; + goto out; + } + + /* Prep dependent devices for reset and clear our marker. */ + QLIST_FOREACH(tmp, &group->device_list, next) { + if (vfio_pci_host_match(&host, &tmp->host)) { + if (single) { + DPRINTF("vfio: found another in-use device " + "%04x:%02x:%02x.%x\n", host.domain, host.bus, + host.slot, host.function); + ret = -EINVAL; + goto out_single; + } + vfio_pci_pre_reset(tmp); + tmp->needs_reset = false; + multi = true; + break; } - error_report("vfio: Error reading device ROM: %m"); - memory_region_destroy(&vdev->pdev.rom); - return -errno; } } - pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom); - vdev->pdev.has_rom = true; - return 0; + if (!single && !multi) { + DPRINTF("vfio: No other in-use devices for multi hot reset\n"); + ret = -EINVAL; + goto out_single; + } + + /* Determine how many group fds need to be passed */ + count = 0; + QLIST_FOREACH(group, &group_list, next) { + for (i = 0; i < info->count; i++) { + if (group->groupid == devices[i].group_id) { + count++; + break; + } + } + } + + reset = g_malloc0(sizeof(*reset) + (count * sizeof(*fds))); + reset->argsz = sizeof(*reset) + (count * sizeof(*fds)); + fds = &reset->group_fds[0]; + + /* Fill in group fds */ + QLIST_FOREACH(group, &group_list, next) { + for (i = 0; i < info->count; i++) { + if (group->groupid == devices[i].group_id) { + fds[reset->count++] = group->fd; + break; + } + } + } + + /* Bus reset! */ + ret = ioctl(vdev->fd, VFIO_DEVICE_PCI_HOT_RESET, reset); + g_free(reset); + + DPRINTF("%04x:%02x:%02x.%x hot reset: %s\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + ret ? "%m" : "Success"); + +out: + /* Re-enable INTx on affected devices */ + for (i = 0; i < info->count; i++) { + PCIHostDeviceAddress host; + VFIODevice *tmp; + + host.domain = devices[i].segment; + host.bus = devices[i].bus; + host.slot = PCI_SLOT(devices[i].devfn); + host.function = PCI_FUNC(devices[i].devfn); + + if (vfio_pci_host_match(&host, &vdev->host)) { + continue; + } + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == devices[i].group_id) { + break; + } + } + + if (!group) { + break; + } + + QLIST_FOREACH(tmp, &group->device_list, next) { + if (vfio_pci_host_match(&host, &tmp->host)) { + vfio_pci_post_reset(tmp); + break; + } + } + } +out_single: + vfio_pci_post_reset(vdev); + g_free(info); + + return ret; +} + +/* + * We want to differentiate hot reset of mulitple in-use devices vs hot reset + * of a single in-use device. VFIO_DEVICE_RESET will already handle the case + * of doing hot resets when there is only a single device per bus. The in-use + * here refers to how many VFIODevices are affected. A hot reset that affects + * multiple devices, but only a single in-use device, means that we can call + * it from our bus ->reset() callback since the extent is effectively a single + * device. This allows us to make use of it in the hotplug path. When there + * are multiple in-use devices, we can only trigger the hot reset during a + * system reset and thus from our reset handler. We separate _one vs _multi + * here so that we don't overlap and do a double reset on the system reset + * path where both our reset handler and ->reset() callback are used. Calling + * _one() will only do a hot reset for the one in-use devices case, calling + * _multi() will do nothing if a _one() would have been sufficient. + */ +static int vfio_pci_hot_reset_one(VFIODevice *vdev) +{ + return vfio_pci_hot_reset(vdev, true); +} + +static int vfio_pci_hot_reset_multi(VFIODevice *vdev) +{ + return vfio_pci_hot_reset(vdev, false); +} + +static void vfio_pci_reset_handler(void *opaque) +{ + VFIOGroup *group; + VFIODevice *vdev; + + QLIST_FOREACH(group, &group_list, next) { + QLIST_FOREACH(vdev, &group->device_list, next) { + if (!vdev->reset_works || (!vdev->has_flr && vdev->has_pm_reset)) { + vdev->needs_reset = true; + } + } + } + + QLIST_FOREACH(group, &group_list, next) { + QLIST_FOREACH(vdev, &group->device_list, next) { + if (vdev->needs_reset) { + vfio_pci_hot_reset_multi(vdev); + } + } + } } static int vfio_connect_container(VFIOGroup *group) @@ -2746,6 +3182,10 @@ static VFIOGroup *vfio_get_group(int groupid) return NULL; } + if (QLIST_EMPTY(&group_list)) { + qemu_register_reset(vfio_pci_reset_handler, NULL); + } + QLIST_INSERT_HEAD(&group_list, group, next); return group; @@ -2762,6 +3202,10 @@ static void vfio_put_group(VFIOGroup *group) DPRINTF("vfio_put_group: close group->fd\n"); close(group->fd); g_free(group); + + if (QLIST_EMPTY(&group_list)) { + qemu_unregister_reset(vfio_pci_reset_handler, NULL); + } } static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) @@ -2800,9 +3244,6 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) } vdev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); - if (!vdev->reset_works) { - error_report("Warning, device %s does not support reset", name); - } if (dev_info.num_regions < VFIO_PCI_CONFIG_REGION_INDEX + 1) { error_report("vfio: unexpected number of io regions %u", @@ -2837,22 +3278,6 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) QLIST_INIT(&vdev->bars[i].quirks); } - reg_info.index = VFIO_PCI_ROM_REGION_INDEX; - - ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); - if (ret) { - error_report("vfio: Error getting ROM info: %m"); - goto error; - } - - DPRINTF("Device %s ROM:\n", name); - DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", - (unsigned long)reg_info.size, (unsigned long)reg_info.offset, - (unsigned long)reg_info.flags); - - vdev->rom_size = reg_info.size; - vdev->rom_offset = reg_info.offset; - reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX; ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); @@ -2917,13 +3342,15 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) ret = ioctl(vdev->fd, VFIO_DEVICE_GET_IRQ_INFO, &irq_info); if (ret) { /* This can fail for an old kernel or legacy PCI dev */ - DPRINTF("VFIO_DEVICE_GET_IRQ_INFO failure ret=%d\n", ret); + DPRINTF("VFIO_DEVICE_GET_IRQ_INFO failure: %m\n"); ret = 0; } else if (irq_info.count == 1) { vdev->pci_aer = true; } else { - error_report("vfio: Warning: " - "Could not enable error recovery for the device\n"); + error_report("vfio: %04x:%02x:%02x.%x " + "Could not enable error recovery for the device", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); } error: @@ -2964,11 +3391,10 @@ static void vfio_err_notifier_handler(void *opaque) * guest to contain the error. */ - error_report("%s (%04x:%02x:%02x.%x)" - "Unrecoverable error detected...\n" - "Please collect any data possible and then kill the guest", - __func__, vdev->host.domain, vdev->host.bus, - vdev->host.slot, vdev->host.function); + error_report("%s(%04x:%02x:%02x.%x) Unrecoverable error detected. " + "Please collect any data possible and then kill the guest", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function); vm_stop(RUN_STATE_IO_ERROR); } @@ -2991,8 +3417,7 @@ static void vfio_register_err_notifier(VFIODevice *vdev) } if (event_notifier_init(&vdev->err_notifier, 0)) { - error_report("vfio: Warning: " - "Unable to init event notifier for error detection\n"); + error_report("vfio: Unable to init event notifier for error detection"); vdev->pci_aer = false; return; } @@ -3013,7 +3438,7 @@ static void vfio_register_err_notifier(VFIODevice *vdev) ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); if (ret) { - error_report("vfio: Failed to set up error notification\n"); + error_report("vfio: Failed to set up error notification"); qemu_set_fd_handler(*pfd, NULL, NULL, vdev); event_notifier_cleanup(&vdev->err_notifier); vdev->pci_aer = false; @@ -3046,7 +3471,7 @@ static void vfio_unregister_err_notifier(VFIODevice *vdev) ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); if (ret) { - error_report("vfio: Failed to de-assign error fd: %d\n", ret); + error_report("vfio: Failed to de-assign error fd: %m"); } g_free(irq_set); qemu_set_fd_handler(event_notifier_get_fd(&vdev->err_notifier), @@ -3150,7 +3575,7 @@ static int vfio_initfn(PCIDevice *pdev) memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); - vfio_load_rom(vdev); + vfio_pci_size_rom(vdev); ret = vfio_early_setup_msix(vdev); if (ret) { @@ -3215,6 +3640,7 @@ static void vfio_exitfn(PCIDevice *pdev) vfio_teardown_msi(vdev); vfio_unmap_bars(vdev); g_free(vdev->emulated_config_bits); + g_free(vdev->rom); vfio_put_device(vdev); vfio_put_group(group); } @@ -3223,51 +3649,34 @@ static void vfio_pci_reset(DeviceState *dev) { PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); - uint16_t cmd; DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, vdev->host.bus, vdev->host.slot, vdev->host.function); - vfio_disable_interrupts(vdev); - - /* Make sure the device is in D0 */ - if (vdev->pm_cap) { - uint16_t pmcsr; - uint8_t state; + vfio_pci_pre_reset(vdev); - pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2); - state = pmcsr & PCI_PM_CTRL_STATE_MASK; - if (state) { - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - vfio_pci_write_config(pdev, vdev->pm_cap + PCI_PM_CTRL, pmcsr, 2); - /* vfio handles the necessary delay here */ - pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2); - state = pmcsr & PCI_PM_CTRL_STATE_MASK; - if (state) { - error_report("vfio: Unable to power on device, stuck in D%d\n", - state); - } - } + if (vdev->reset_works && (vdev->has_flr || !vdev->has_pm_reset) && + !ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + DPRINTF("%04x:%02x:%02x.%x FLR/VFIO_DEVICE_RESET\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + goto post_reset; } - /* - * Stop any ongoing DMA by disconecting I/O, MMIO, and bus master. - * Also put INTx Disable in known state. - */ - cmd = vfio_pci_read_config(pdev, PCI_COMMAND, 2); - cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_INTX_DISABLE); - vfio_pci_write_config(pdev, PCI_COMMAND, cmd, 2); + /* See if we can do our own bus reset */ + if (!vfio_pci_hot_reset_one(vdev)) { + goto post_reset; + } - if (vdev->reset_works) { - if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { - error_report("vfio: Error unable to reset physical device " - "(%04x:%02x:%02x.%x): %m", vdev->host.domain, - vdev->host.bus, vdev->host.slot, vdev->host.function); - } + /* If nothing else works and the device supports PM reset, use it */ + if (vdev->reset_works && vdev->has_pm_reset && + !ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + DPRINTF("%04x:%02x:%02x.%x PCI PM Reset\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + goto post_reset; } - vfio_enable_intx(vdev); +post_reset: + vfio_pci_post_reset(vdev); } static Property vfio_pci_dev_properties[] = { |