diff options
Diffstat (limited to 'include/hw/misc/aspeed_scu.h')
| -rw-r--r-- | include/hw/misc/aspeed_scu.h | 70 |
1 files changed, 66 insertions, 4 deletions
diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h index d70cc0aeca..f662c38188 100644 --- a/include/hw/misc/aspeed_scu.h +++ b/include/hw/misc/aspeed_scu.h @@ -30,6 +30,10 @@ typedef struct AspeedSCUState { uint32_t hw_strap1; uint32_t hw_strap2; uint32_t hw_prot_key; + + uint32_t clkin; + uint32_t hpll; + uint32_t apb_freq; } AspeedSCUState; #define AST2400_A0_SILICON_REV 0x02000303U @@ -58,7 +62,64 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev); * 1. 2012/12/29 Ryan Chen Create */ -/* Hardware Strapping Register definition (for Aspeed AST2400 SOC) +/* SCU08 Clock Selection Register + * + * 31 Enable Video Engine clock dynamic slow down + * 30:28 Video Engine clock slow down setting + * 27 2D Engine GCLK clock source selection + * 26 2D Engine GCLK clock throttling enable + * 25:23 APB PCLK divider selection + * 22:20 LPC Host LHCLK divider selection + * 19 LPC Host LHCLK clock generation/output enable control + * 18:16 MAC AHB bus clock divider selection + * 15 SD/SDIO clock running enable + * 14:12 SD/SDIO divider selection + * 11 Reserved + * 10:8 Video port output clock delay control bit + * 7 ARM CPU/AHB clock slow down enable + * 6:4 ARM CPU/AHB clock slow down setting + * 3:2 ECLK clock source selection + * 1 CPU/AHB clock slow down idle timer + * 0 CPU/AHB clock dynamic slow down enable (defined in bit[6:4]) + */ +#define SCU_CLK_GET_PCLK_DIV(x) (((x) >> 23) & 0x7) + +/* SCU24 H-PLL Parameter Register (for Aspeed AST2400 SOC) + * + * 18 H-PLL parameter selection + * 0: Select H-PLL by strapping resistors + * 1: Select H-PLL by the programmed registers (SCU24[17:0]) + * 17 Enable H-PLL bypass mode + * 16 Turn off H-PLL + * 10:5 H-PLL Numerator + * 4 H-PLL Output Divider + * 3:0 H-PLL Denumerator + * + * (Output frequency) = 24MHz * (2-OD) * [(Numerator+2) / (Denumerator+1)] + */ + +#define SCU_AST2400_H_PLL_PROGRAMMED (0x1 << 18) +#define SCU_AST2400_H_PLL_BYPASS_EN (0x1 << 17) +#define SCU_AST2400_H_PLL_OFF (0x1 << 16) + +/* SCU24 H-PLL Parameter Register (for Aspeed AST2500 SOC) + * + * 21 Enable H-PLL reset + * 20 Enable H-PLL bypass mode + * 19 Turn off H-PLL + * 18:13 H-PLL Post Divider + * 12:5 H-PLL Numerator (M) + * 4:0 H-PLL Denumerator (N) + * + * (Output frequency) = CLKIN(24MHz) * [(M+1) / (N+1)] / (P+1) + * + * The default frequency is 792Mhz when CLKIN = 24MHz + */ + +#define SCU_H_PLL_BYPASS_EN (0x1 << 20) +#define SCU_H_PLL_OFF (0x1 << 19) + +/* SCU70 Hardware Strapping Register definition (for Aspeed AST2400 SOC) * * 31:29 Software defined strapping registers * 28:27 DRAM size setting (for VGA driver use) @@ -107,12 +168,13 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev); #define SCU_AST2400_HW_STRAP_GET_CLK_SOURCE(x) (((((x) >> 23) & 0x1) << 1) \ | (((x) >> 18) & 0x1)) #define SCU_AST2400_HW_STRAP_CLK_SOURCE_MASK ((0x1 << 23) | (0x1 << 18)) -#define AST2400_CLK_25M_IN (0x1 << 23) +#define SCU_HW_STRAP_CLK_25M_IN (0x1 << 23) #define AST2400_CLK_24M_IN 0 #define AST2400_CLK_48M_IN 1 #define AST2400_CLK_25M_IN_24M_USB_CKI 2 #define AST2400_CLK_25M_IN_48M_USB_CKI 3 +#define SCU_HW_STRAP_CLK_48M_IN (0x1 << 18) #define SCU_HW_STRAP_2ND_BOOT_WDT (0x1 << 17) #define SCU_HW_STRAP_SUPER_IO_CONFIG (0x1 << 16) #define SCU_HW_STRAP_VGA_CLASS_CODE (0x1 << 15) @@ -160,8 +222,8 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev); #define AST2400_DIS_BOOT 3 /* - * Hardware strapping register definition (for Aspeed AST2500 SoC and - * higher) + * SCU70 Hardware strapping register definition (for Aspeed AST2500 + * SoC and higher) * * 31 Enable SPI Flash Strap Auto Fetch Mode * 30 Enable GPIO Strap Mode |