diff options
Diffstat (limited to 'include/standard-headers/linux')
| -rw-r--r-- | include/standard-headers/linux/ethtool.h | 81 | ||||
| -rw-r--r-- | include/standard-headers/linux/fuse.h | 20 | ||||
| -rw-r--r-- | include/standard-headers/linux/input-event-codes.h | 4 | ||||
| -rw-r--r-- | include/standard-headers/linux/pci_regs.h | 2 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_blk.h | 19 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_bt.h | 8 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_net.h | 4 |
7 files changed, 128 insertions, 10 deletions
diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index 4537da20cc..87176ab075 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -159,8 +159,10 @@ static inline uint32_t ethtool_cmd_speed(const struct ethtool_cmd *ep) * in its bus driver structure (e.g. pci_driver::name). Must * not be an empty string. * @version: Driver version string; may be an empty string - * @fw_version: Firmware version string; may be an empty string - * @erom_version: Expansion ROM version string; may be an empty string + * @fw_version: Firmware version string; driver defined; may be an + * empty string + * @erom_version: Expansion ROM version string; driver defined; may be + * an empty string * @bus_info: Device bus address. This should match the dev_name() * string for the underlying bus device, if there is one. May be * an empty string. @@ -179,10 +181,6 @@ static inline uint32_t ethtool_cmd_speed(const struct ethtool_cmd *ep) * * Users can use the %ETHTOOL_GSSET_INFO command to get the number of * strings in any string set (from Linux 2.6.34). - * - * Drivers should set at most @driver, @version, @fw_version and - * @bus_info in their get_drvinfo() implementation. The ethtool - * core fills in the other fields using other driver operations. */ struct ethtool_drvinfo { uint32_t cmd; @@ -737,6 +735,51 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState + * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are + * unknown + * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled + * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled + */ +enum ethtool_podl_pse_admin_state { + ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE. + * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is + * asserted true when the PoDL PSE state diagram variable mr_pse_enable is + * false" + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is + * asserted true when either of the PSE state diagram variables + * pi_detecting or pi_classifying is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower” + * is asserted true when the PoDL PSE state diagram variable pi_powered is + * true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted + * true when the PoDL PSE state diagram variable pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true + * when the logical combination of the PoDL PSE state diagram variables + * pi_prebiased*!pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted + * true when the PoDL PSE state diagram variable overload_held is true." + */ +enum ethtool_podl_pse_pw_d_status { + ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP, + ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE, + ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset @@ -1692,6 +1735,13 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92, + ETHTOOL_LINK_MODE_800000baseCR8_Full_BIT = 93, + ETHTOOL_LINK_MODE_800000baseKR8_Full_BIT = 94, + ETHTOOL_LINK_MODE_800000baseDR8_Full_BIT = 95, + ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96, + ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97, + ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98, + /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; @@ -1803,6 +1853,7 @@ enum ethtool_link_mode_bit_indices { #define SPEED_100000 100000 #define SPEED_200000 200000 #define SPEED_400000 400000 +#define SPEED_800000 800000 #define SPEED_UNKNOWN -1 @@ -1840,6 +1891,20 @@ static inline int ethtool_validate_duplex(uint8_t duplex) #define MASTER_SLAVE_STATE_SLAVE 3 #define MASTER_SLAVE_STATE_ERR 4 +/* These are used to throttle the rate of data on the phy interface when the + * native speed of the interface is higher than the link speed. These should + * not be used for phy interfaces which natively support multiple speeds (e.g. + * MII or SGMII). + */ +/* No rate matching performed. */ +#define RATE_MATCH_NONE 0 +/* The phy sends pause frames to throttle the MAC. */ +#define RATE_MATCH_PAUSE 1 +/* The phy asserts CRS to prevent the MAC from transmitting. */ +#define RATE_MATCH_CRS 2 +/* The MAC is programmed with a sufficiently-large IPG. */ +#define RATE_MATCH_OPEN_LOOP 3 + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -2033,8 +2098,8 @@ enum ethtool_reset_flags { * reported consistently by PHYLIB. Read-only. * @master_slave_cfg: Master/slave port mode. * @master_slave_state: Master/slave port state. + * @rate_matching: Rate adaptation performed by the PHY * @reserved: Reserved for future use; see the note on reserved space. - * @reserved1: Reserved for future use; see the note on reserved space. * @link_mode_masks: Variable length bitmaps. * * If autonegotiation is disabled, the speed and @duplex represent the @@ -2085,7 +2150,7 @@ struct ethtool_link_settings { uint8_t transceiver; uint8_t master_slave_cfg; uint8_t master_slave_state; - uint8_t reserved1[1]; + uint8_t rate_matching; uint32_t reserved[7]; uint32_t link_mode_masks[]; /* layout of link_mode_masks fields: diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h index bda06258be..a1af78d989 100644 --- a/include/standard-headers/linux/fuse.h +++ b/include/standard-headers/linux/fuse.h @@ -194,6 +194,13 @@ * - add FUSE_SECURITY_CTX init flag * - add security context to create, mkdir, symlink, and mknod requests * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX + * + * 7.37 + * - add FUSE_TMPFILE + * + * 7.38 + * - add FUSE_EXPIRE_ONLY flag to fuse_notify_inval_entry + * - add FOPEN_PARALLEL_DIRECT_WRITES */ #ifndef _LINUX_FUSE_H @@ -225,7 +232,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 36 +#define FUSE_KERNEL_MINOR_VERSION 38 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -297,6 +304,7 @@ struct fuse_file_lock { * FOPEN_CACHE_DIR: allow caching this directory * FOPEN_STREAM: the file is stream-like (no file position at all) * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE) + * FOPEN_PARALLEL_DIRECT_WRITES: Allow concurrent direct writes on the same inode */ #define FOPEN_DIRECT_IO (1 << 0) #define FOPEN_KEEP_CACHE (1 << 1) @@ -304,6 +312,7 @@ struct fuse_file_lock { #define FOPEN_CACHE_DIR (1 << 3) #define FOPEN_STREAM (1 << 4) #define FOPEN_NOFLUSH (1 << 5) +#define FOPEN_PARALLEL_DIRECT_WRITES (1 << 6) /** * INIT request/reply flags @@ -484,6 +493,12 @@ struct fuse_file_lock { */ #define FUSE_SETXATTR_ACL_KILL_SGID (1 << 0) +/** + * notify_inval_entry flags + * FUSE_EXPIRE_ONLY + */ +#define FUSE_EXPIRE_ONLY (1 << 0) + enum fuse_opcode { FUSE_LOOKUP = 1, FUSE_FORGET = 2, /* no reply */ @@ -533,6 +548,7 @@ enum fuse_opcode { FUSE_SETUPMAPPING = 48, FUSE_REMOVEMAPPING = 49, FUSE_SYNCFS = 50, + FUSE_TMPFILE = 51, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -911,7 +927,7 @@ struct fuse_notify_inval_inode_out { struct fuse_notify_inval_entry_out { uint64_t parent; uint32_t namelen; - uint32_t padding; + uint32_t flags; }; struct fuse_notify_delete_out { diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index 50790aee5a..f6bab08540 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -614,6 +614,9 @@ #define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ #define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */ #define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */ +#define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */ +#define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ +#define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ @@ -862,6 +865,7 @@ #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 +#define ABS_PROFILE 0x21 #define ABS_MISC 0x28 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index 57b8e2ffb1..85ab127881 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -1058,6 +1058,7 @@ /* Precision Time Measurement */ #define PCI_PTM_CAP 0x04 /* PTM Capability */ #define PCI_PTM_CAP_REQ 0x00000001 /* Requester capable */ +#define PCI_PTM_CAP_RES 0x00000002 /* Responder capable */ #define PCI_PTM_CAP_ROOT 0x00000004 /* Root capable */ #define PCI_PTM_GRANULARITY_MASK 0x0000FF00 /* Clock granularity */ #define PCI_PTM_CTRL 0x08 /* PTM Control */ @@ -1119,6 +1120,7 @@ #define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object Ready */ #define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */ #define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */ +#define PCI_DOE_CAP_SIZEOF 0x18 /* Size of DOE register block */ /* DOE Data Object - note not actually registers */ #define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff diff --git a/include/standard-headers/linux/virtio_blk.h b/include/standard-headers/linux/virtio_blk.h index 2dcc90826a..e81715cd70 100644 --- a/include/standard-headers/linux/virtio_blk.h +++ b/include/standard-headers/linux/virtio_blk.h @@ -40,6 +40,7 @@ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ +#define VIRTIO_BLK_F_SECURE_ERASE 16 /* Secure Erase is supported */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -119,6 +120,21 @@ struct virtio_blk_config { uint8_t write_zeroes_may_unmap; uint8_t unused1[3]; + + /* the next 3 entries are guarded by VIRTIO_BLK_F_SECURE_ERASE */ + /* + * The maximum secure erase sectors (in 512-byte sectors) for + * one segment. + */ + __virtio32 max_secure_erase_sectors; + /* + * The maximum number of secure erase segments in a + * secure erase command. + */ + __virtio32 max_secure_erase_seg; + /* Secure erase commands must be aligned to this number of sectors. */ + __virtio32 secure_erase_sector_alignment; + } QEMU_PACKED; /* @@ -153,6 +169,9 @@ struct virtio_blk_config { /* Write zeroes command */ #define VIRTIO_BLK_T_WRITE_ZEROES 13 +/* Secure erase command */ +#define VIRTIO_BLK_T_SECURE_ERASE 14 + #ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 diff --git a/include/standard-headers/linux/virtio_bt.h b/include/standard-headers/linux/virtio_bt.h index 245e1eff4b..a11ecc3f92 100644 --- a/include/standard-headers/linux/virtio_bt.h +++ b/include/standard-headers/linux/virtio_bt.h @@ -9,6 +9,7 @@ #define VIRTIO_BT_F_VND_HCI 0 /* Indicates vendor command support */ #define VIRTIO_BT_F_MSFT_EXT 1 /* Indicates MSFT vendor support */ #define VIRTIO_BT_F_AOSP_EXT 2 /* Indicates AOSP vendor support */ +#define VIRTIO_BT_F_CONFIG_V2 3 /* Use second version configuration */ enum virtio_bt_config_type { VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, @@ -28,4 +29,11 @@ struct virtio_bt_config { uint16_t msft_opcode; } QEMU_PACKED; +struct virtio_bt_config_v2 { + uint8_t type; + uint8_t alignment; + uint16_t vendor; + uint16_t msft_opcode; +}; + #endif /* _LINUX_VIRTIO_BT_H */ diff --git a/include/standard-headers/linux/virtio_net.h b/include/standard-headers/linux/virtio_net.h index 42c68caf71..c0e797067a 100644 --- a/include/standard-headers/linux/virtio_net.h +++ b/include/standard-headers/linux/virtio_net.h @@ -57,6 +57,9 @@ * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ #define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ +#define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ +#define VIRTIO_NET_F_GUEST_USO6 55 /* Guest can handle USOv6 in. */ +#define VIRTIO_NET_F_HOST_USO 56 /* Host can handle USO in. */ #define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */ #define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */ #define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */ @@ -130,6 +133,7 @@ struct virtio_net_hdr_v1 { #define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ #define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ #define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_UDP_L4 5 /* GSO frame, IPv4& IPv6 UDP (USO) */ #define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ uint8_t gso_type; __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ |