diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/migration/misc.h | 9 | ||||
| -rw-r--r-- | include/standard-headers/drm/drm_fourcc.h | 43 | ||||
| -rw-r--r-- | include/standard-headers/linux/const.h | 17 | ||||
| -rw-r--r-- | include/standard-headers/linux/ethtool.h | 226 | ||||
| -rw-r--r-- | include/standard-headers/linux/fuse.h | 22 | ||||
| -rw-r--r-- | include/standard-headers/linux/input-event-codes.h | 2 | ||||
| -rw-r--r-- | include/standard-headers/linux/pci_regs.h | 41 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_balloon.h | 16 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_gpu.h | 1 | ||||
| -rw-r--r-- | include/sysemu/cpu-throttle.h | 14 |
10 files changed, 379 insertions, 12 deletions
diff --git a/include/migration/misc.h b/include/migration/misc.h index bfadc5613b..804eb23c06 100644 --- a/include/migration/misc.h +++ b/include/migration/misc.h @@ -39,7 +39,6 @@ void precopy_add_notifier(NotifierWithReturn *n); void precopy_remove_notifier(NotifierWithReturn *n); int precopy_notify(PrecopyNotifyReason reason, Error **errp); -void ram_mig_init(void); void qemu_guest_free_page_hint(void *addr, size_t len); bool migrate_ram_is_ignored(RAMBlock *block); @@ -53,11 +52,11 @@ void dump_vmstate_json_to_file(FILE *out_fp); /* migration/migration.c */ void migration_object_init(void); void migration_shutdown(void); -bool migration_is_idle(void); + bool migration_is_active(void); bool migration_is_device(void); +bool migration_is_running(void); bool migration_thread_is_self(void); -bool migration_is_setup_or_active(void); typedef enum MigrationEventType { MIG_EVENT_PRECOPY_SETUP, @@ -96,7 +95,6 @@ void migration_add_notifier_mode(NotifierWithReturn *notify, MigrationNotifyFunc func, MigMode mode); void migration_remove_notifier(NotifierWithReturn *notify); -bool migration_is_running(void); void migration_file_set_error(int ret, Error *err); /* True if incoming migration entered POSTCOPY_INCOMING_DISCARD */ @@ -108,7 +106,4 @@ bool migration_incoming_postcopy_advised(void); /* True if background snapshot is active */ bool migration_in_bg_snapshot(void); -/* migration/block-dirty-bitmap.c */ -void dirty_bitmap_mig_init(void); - #endif diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h index b72917073d..d4a2231306 100644 --- a/include/standard-headers/drm/drm_fourcc.h +++ b/include/standard-headers/drm/drm_fourcc.h @@ -702,6 +702,31 @@ extern "C" { #define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS_CC fourcc_mod_code(INTEL, 15) /* + * Intel Color Control Surfaces (CCS) for graphics ver. 20 unified compression + * on integrated graphics + * + * The main surface is Tile 4 and at plane index 0. For semi-planar formats + * like NV12, the Y and UV planes are Tile 4 and are located at plane indices + * 0 and 1, respectively. The CCS for all planes are stored outside of the + * GEM object in a reserved memory area dedicated for the storage of the + * CCS data for all compressible GEM objects. + */ +#define I915_FORMAT_MOD_4_TILED_LNL_CCS fourcc_mod_code(INTEL, 16) + +/* + * Intel Color Control Surfaces (CCS) for graphics ver. 20 unified compression + * on discrete graphics + * + * The main surface is Tile 4 and at plane index 0. For semi-planar formats + * like NV12, the Y and UV planes are Tile 4 and are located at plane indices + * 0 and 1, respectively. The CCS for all planes are stored outside of the + * GEM object in a reserved memory area dedicated for the storage of the + * CCS data for all compressible GEM objects. The GEM object must be stored in + * contiguous memory with a size aligned to 64KB + */ +#define I915_FORMAT_MOD_4_TILED_BMG_CCS fourcc_mod_code(INTEL, 17) + +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * * Macroblocks are laid in a Z-shape, and each pixel data is following the @@ -1475,6 +1500,7 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) #define AMD_FMT_MOD_TILE_VER_GFX10 2 #define AMD_FMT_MOD_TILE_VER_GFX10_RBPLUS 3 #define AMD_FMT_MOD_TILE_VER_GFX11 4 +#define AMD_FMT_MOD_TILE_VER_GFX12 5 /* * 64K_S is the same for GFX9/GFX10/GFX10_RBPLUS and hence has GFX9 as canonical @@ -1485,6 +1511,8 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) /* * 64K_D for non-32 bpp is the same for GFX9/GFX10/GFX10_RBPLUS and hence has * GFX9 as canonical version. + * + * 64K_D_2D on GFX12 is identical to 64K_D on GFX11. */ #define AMD_FMT_MOD_TILE_GFX9_64K_D 10 #define AMD_FMT_MOD_TILE_GFX9_64K_S_X 25 @@ -1492,6 +1520,21 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) #define AMD_FMT_MOD_TILE_GFX9_64K_R_X 27 #define AMD_FMT_MOD_TILE_GFX11_256K_R_X 31 +/* Gfx12 swizzle modes: + * 0 - LINEAR + * 1 - 256B_2D - 2D block dimensions + * 2 - 4KB_2D + * 3 - 64KB_2D + * 4 - 256KB_2D + * 5 - 4KB_3D - 3D block dimensions + * 6 - 64KB_3D + * 7 - 256KB_3D + */ +#define AMD_FMT_MOD_TILE_GFX12_256B_2D 1 +#define AMD_FMT_MOD_TILE_GFX12_4K_2D 2 +#define AMD_FMT_MOD_TILE_GFX12_64K_2D 3 +#define AMD_FMT_MOD_TILE_GFX12_256K_2D 4 + #define AMD_FMT_MOD_DCC_BLOCK_64B 0 #define AMD_FMT_MOD_DCC_BLOCK_128B 1 #define AMD_FMT_MOD_DCC_BLOCK_256B 2 diff --git a/include/standard-headers/linux/const.h b/include/standard-headers/linux/const.h index 1eb84b5087..2122610de7 100644 --- a/include/standard-headers/linux/const.h +++ b/include/standard-headers/linux/const.h @@ -28,6 +28,23 @@ #define _BITUL(x) (_UL(1) << (x)) #define _BITULL(x) (_ULL(1) << (x)) +#if !defined(__ASSEMBLY__) +/* + * Missing __asm__ support + * + * __BIT128() would not work in the __asm__ code, as it shifts an + * 'unsigned __init128' data type as direct representation of + * 128 bit constants is not supported in the gcc compiler, as + * they get silently truncated. + * + * TODO: Please revisit this implementation when gcc compiler + * starts representing 128 bit constants directly like long + * and unsigned long etc. Subsequently drop the comment for + * GENMASK_U128() which would then start supporting __asm__ code. + */ +#define _BIT128(x) ((unsigned __int128)(1) << (x)) +#endif + #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index b0b4b68410..b05e84825b 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -753,6 +753,197 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + +/** * enum ethtool_pse_types - Types of PSE controller. * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown * @ETHTOOL_PSE_PODL: PSE controller which support PoDL @@ -878,6 +1069,24 @@ enum ethtool_mm_verify_status { }; /** + * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status + * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has + * started. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process + * is in progress. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was + * completed successfully. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was + * stopped due to an error. + */ +enum ethtool_module_fw_flash_status { + ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1, + ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS, + ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED, + ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset @@ -1845,6 +2054,7 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT = 102, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS @@ -2323,4 +2533,20 @@ struct ethtool_link_settings { * uint32_t map_lp_advertising[link_mode_masks_nwords]; */ }; + +/** + * enum phy_upstream - Represents the upstream component a given PHY device + * is connected to, as in what is on the other end of the MII bus. Most PHYs + * will be attached to an Ethernet MAC controller, but in some cases, there's + * an intermediate PHY used as a media-converter, which will driver another + * MII interface as its output. + * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port, + * or ethernet controller) + * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter) + */ +enum phy_upstream { + PHY_UPSTREAM_MAC, + PHY_UPSTREAM_PHY, +}; + #endif /* _LINUX_ETHTOOL_H */ diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h index bac9dbc49f..889e12ad15 100644 --- a/include/standard-headers/linux/fuse.h +++ b/include/standard-headers/linux/fuse.h @@ -217,6 +217,9 @@ * - add backing_id to fuse_open_out, add FOPEN_PASSTHROUGH open flag * - add FUSE_NO_EXPORT_SUPPORT init flag * - add FUSE_NOTIFY_RESEND, add FUSE_HAS_RESEND init flag + * + * 7.41 + * - add FUSE_ALLOW_IDMAP */ #ifndef _LINUX_FUSE_H @@ -248,7 +251,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 40 +#define FUSE_KERNEL_MINOR_VERSION 41 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -417,6 +420,7 @@ struct fuse_file_lock { * FUSE_NO_EXPORT_SUPPORT: explicitly disable export support * FUSE_HAS_RESEND: kernel supports resending pending requests, and the high bit * of the request ID indicates resend requests + * FUSE_ALLOW_IDMAP: allow creation of idmapped mounts */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -462,6 +466,7 @@ struct fuse_file_lock { /* Obsolete alias for FUSE_DIRECT_IO_ALLOW_MMAP */ #define FUSE_DIRECT_IO_RELAX FUSE_DIRECT_IO_ALLOW_MMAP +#define FUSE_ALLOW_IDMAP (1ULL << 40) /** * CUSE INIT request/reply flags @@ -980,6 +985,21 @@ struct fuse_fallocate_in { */ #define FUSE_UNIQUE_RESEND (1ULL << 63) +/** + * This value will be set by the kernel to + * (struct fuse_in_header).{uid,gid} fields in + * case when: + * - fuse daemon enabled FUSE_ALLOW_IDMAP + * - idmapping information is not available and uid/gid + * can not be mapped in accordance with an idmapping. + * + * Note: an idmapping information always available + * for inode creation operations like: + * FUSE_MKNOD, FUSE_SYMLINK, FUSE_MKDIR, FUSE_TMPFILE, + * FUSE_CREATE and FUSE_RENAME2 (with RENAME_WHITEOUT). + */ +#define FUSE_INVALID_UIDGID ((uint32_t)(-1)) + struct fuse_in_header { uint32_t len; uint32_t opcode; diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index 2221b0c383..50b2b7497e 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -618,6 +618,8 @@ #define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ +#define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */ +#define KEY_DO_NOT_DISTURB 0x24f /* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index 94c00996e6..12323b3334 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -634,9 +634,11 @@ #define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ #define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ #define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCTL_RRS_SVE 0x0010 /* Config RRS Software Visibility Enable */ +#define PCI_EXP_RTCTL_CRSSVE PCI_EXP_RTCTL_RRS_SVE /* compatibility */ #define PCI_EXP_RTCAP 0x1e /* Root Capabilities */ -#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ +#define PCI_EXP_RTCAP_RRS_SV 0x0001 /* Config RRS Software Visibility */ +#define PCI_EXP_RTCAP_CRSVIS PCI_EXP_RTCAP_RRS_SV /* compatibility */ #define PCI_EXP_RTSTA 0x20 /* Root Status */ #define PCI_EXP_RTSTA_PME_RQ_ID 0x0000ffff /* PME Requester ID */ #define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ @@ -740,6 +742,7 @@ #define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */ #define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ #define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ +#define PCI_EXT_CAP_ID_NPEM 0x29 /* Native PCIe Enclosure Management */ #define PCI_EXT_CAP_ID_PL_32GT 0x2A /* Physical Layer 32.0 GT/s */ #define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE @@ -1121,6 +1124,40 @@ #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0 #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 +/* Native PCIe Enclosure Management */ +#define PCI_NPEM_CAP 0x04 /* NPEM capability register */ +#define PCI_NPEM_CAP_CAPABLE 0x00000001 /* NPEM Capable */ + +#define PCI_NPEM_CTRL 0x08 /* NPEM control register */ +#define PCI_NPEM_CTRL_ENABLE 0x00000001 /* NPEM Enable */ + +/* + * Native PCIe Enclosure Management indication bits and Reset command bit + * are corresponding for capability and control registers. + */ +#define PCI_NPEM_CMD_RESET 0x00000002 /* Reset Command */ +#define PCI_NPEM_IND_OK 0x00000004 /* OK */ +#define PCI_NPEM_IND_LOCATE 0x00000008 /* Locate */ +#define PCI_NPEM_IND_FAIL 0x00000010 /* Fail */ +#define PCI_NPEM_IND_REBUILD 0x00000020 /* Rebuild */ +#define PCI_NPEM_IND_PFA 0x00000040 /* Predicted Failure Analysis */ +#define PCI_NPEM_IND_HOTSPARE 0x00000080 /* Hot Spare */ +#define PCI_NPEM_IND_ICA 0x00000100 /* In Critical Array */ +#define PCI_NPEM_IND_IFA 0x00000200 /* In Failed Array */ +#define PCI_NPEM_IND_IDT 0x00000400 /* Device Type */ +#define PCI_NPEM_IND_DISABLED 0x00000800 /* Disabled */ +#define PCI_NPEM_IND_SPEC_0 0x01000000 +#define PCI_NPEM_IND_SPEC_1 0x02000000 +#define PCI_NPEM_IND_SPEC_2 0x04000000 +#define PCI_NPEM_IND_SPEC_3 0x08000000 +#define PCI_NPEM_IND_SPEC_4 0x10000000 +#define PCI_NPEM_IND_SPEC_5 0x20000000 +#define PCI_NPEM_IND_SPEC_6 0x40000000 +#define PCI_NPEM_IND_SPEC_7 0x80000000 + +#define PCI_NPEM_STATUS 0x0c /* NPEM status register */ +#define PCI_NPEM_STATUS_CC 0x00000001 /* Command Completed */ + /* Data Object Exchange */ #define PCI_DOE_CAP 0x04 /* DOE Capabilities Register */ #define PCI_DOE_CAP_INT_SUP 0x00000001 /* Interrupt Support */ diff --git a/include/standard-headers/linux/virtio_balloon.h b/include/standard-headers/linux/virtio_balloon.h index f343bfefd8..3121cd2e0e 100644 --- a/include/standard-headers/linux/virtio_balloon.h +++ b/include/standard-headers/linux/virtio_balloon.h @@ -71,7 +71,13 @@ struct virtio_balloon_config { #define VIRTIO_BALLOON_S_CACHES 7 /* Disk caches */ #define VIRTIO_BALLOON_S_HTLB_PGALLOC 8 /* Hugetlb page allocations */ #define VIRTIO_BALLOON_S_HTLB_PGFAIL 9 /* Hugetlb page allocation failures */ -#define VIRTIO_BALLOON_S_NR 10 +#define VIRTIO_BALLOON_S_OOM_KILL 10 /* OOM killer invocations */ +#define VIRTIO_BALLOON_S_ALLOC_STALL 11 /* Stall count of memory allocatoin */ +#define VIRTIO_BALLOON_S_ASYNC_SCAN 12 /* Amount of memory scanned asynchronously */ +#define VIRTIO_BALLOON_S_DIRECT_SCAN 13 /* Amount of memory scanned directly */ +#define VIRTIO_BALLOON_S_ASYNC_RECLAIM 14 /* Amount of memory reclaimed asynchronously */ +#define VIRTIO_BALLOON_S_DIRECT_RECLAIM 15 /* Amount of memory reclaimed directly */ +#define VIRTIO_BALLOON_S_NR 16 #define VIRTIO_BALLOON_S_NAMES_WITH_PREFIX(VIRTIO_BALLOON_S_NAMES_prefix) { \ VIRTIO_BALLOON_S_NAMES_prefix "swap-in", \ @@ -83,7 +89,13 @@ struct virtio_balloon_config { VIRTIO_BALLOON_S_NAMES_prefix "available-memory", \ VIRTIO_BALLOON_S_NAMES_prefix "disk-caches", \ VIRTIO_BALLOON_S_NAMES_prefix "hugetlb-allocations", \ - VIRTIO_BALLOON_S_NAMES_prefix "hugetlb-failures" \ + VIRTIO_BALLOON_S_NAMES_prefix "hugetlb-failures", \ + VIRTIO_BALLOON_S_NAMES_prefix "oom-kills", \ + VIRTIO_BALLOON_S_NAMES_prefix "alloc-stalls", \ + VIRTIO_BALLOON_S_NAMES_prefix "async-scans", \ + VIRTIO_BALLOON_S_NAMES_prefix "direct-scans", \ + VIRTIO_BALLOON_S_NAMES_prefix "async-reclaims", \ + VIRTIO_BALLOON_S_NAMES_prefix "direct-reclaims" \ } #define VIRTIO_BALLOON_S_NAMES VIRTIO_BALLOON_S_NAMES_WITH_PREFIX("") diff --git a/include/standard-headers/linux/virtio_gpu.h b/include/standard-headers/linux/virtio_gpu.h index 2db643ed8f..6459fdb9fb 100644 --- a/include/standard-headers/linux/virtio_gpu.h +++ b/include/standard-headers/linux/virtio_gpu.h @@ -311,6 +311,7 @@ struct virtio_gpu_cmd_submit { #define VIRTIO_GPU_CAPSET_VIRGL2 2 /* 3 is reserved for gfxstream */ #define VIRTIO_GPU_CAPSET_VENUS 4 +#define VIRTIO_GPU_CAPSET_DRM 6 /* VIRTIO_GPU_CMD_GET_CAPSET_INFO */ struct virtio_gpu_get_capset_info { diff --git a/include/sysemu/cpu-throttle.h b/include/sysemu/cpu-throttle.h index d65bdef6d0..420702b8d3 100644 --- a/include/sysemu/cpu-throttle.h +++ b/include/sysemu/cpu-throttle.h @@ -65,4 +65,18 @@ bool cpu_throttle_active(void); */ int cpu_throttle_get_percentage(void); +/** + * cpu_throttle_dirty_sync_timer_tick: + * + * Dirty sync timer hook. + */ +void cpu_throttle_dirty_sync_timer_tick(void *opaque); + +/** + * cpu_throttle_dirty_sync_timer: + * + * Start or stop the dirty sync timer. + */ +void cpu_throttle_dirty_sync_timer(bool enable); + #endif /* SYSEMU_CPU_THROTTLE_H */ |