diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/block/nbd.h | 53 | ||||
| -rw-r--r-- | include/hw/arm/armv7m.h | 5 | ||||
| -rw-r--r-- | include/hw/arm/iotkit.h | 109 | ||||
| -rw-r--r-- | include/hw/arm/xlnx-zynqmp.h | 2 | ||||
| -rw-r--r-- | include/hw/core/split-irq.h | 57 | ||||
| -rw-r--r-- | include/hw/irq.h | 4 | ||||
| -rw-r--r-- | include/hw/loader.h | 12 | ||||
| -rw-r--r-- | include/hw/misc/iotkit-secctl.h | 103 | ||||
| -rw-r--r-- | include/hw/misc/mps2-fpgaio.h | 43 | ||||
| -rw-r--r-- | include/hw/misc/tz-ppc.h | 101 | ||||
| -rw-r--r-- | include/hw/misc/unimp.h | 10 | ||||
| -rw-r--r-- | include/hw/or-irq.h | 5 | ||||
| -rw-r--r-- | include/hw/qdev-core.h | 30 | ||||
| -rw-r--r-- | include/hw/timer/xlnx-zynqmp-rtc.h | 86 |
14 files changed, 605 insertions, 15 deletions
diff --git a/include/block/nbd.h b/include/block/nbd.h index fc50003003..495564c73a 100644 --- a/include/block/nbd.h +++ b/include/block/nbd.h @@ -41,6 +41,12 @@ struct NBDOptionReply { } QEMU_PACKED; typedef struct NBDOptionReply NBDOptionReply; +typedef struct NBDOptionReplyMetaContext { + NBDOptionReply h; /* h.type = NBD_REP_META_CONTEXT, h.length > 4 */ + uint32_t context_id; + /* meta context name follows */ +} QEMU_PACKED NBDOptionReplyMetaContext; + /* Transmission phase structs * * Note: these are _NOT_ the same as the network representation of an NBD @@ -105,6 +111,19 @@ typedef struct NBDStructuredError { uint16_t message_length; } QEMU_PACKED NBDStructuredError; +/* Header of NBD_REPLY_TYPE_BLOCK_STATUS */ +typedef struct NBDStructuredMeta { + NBDStructuredReplyChunk h; /* h.length >= 12 (at least one extent) */ + uint32_t context_id; + /* extents follows */ +} QEMU_PACKED NBDStructuredMeta; + +/* Extent chunk for NBD_REPLY_TYPE_BLOCK_STATUS */ +typedef struct NBDExtent { + uint32_t length; + uint32_t flags; /* NBD_STATE_* */ +} QEMU_PACKED NBDExtent; + /* Transmission (export) flags: sent from server to client during handshake, but describe what will happen during transmission */ #define NBD_FLAG_HAS_FLAGS (1 << 0) /* Flags are there */ @@ -128,21 +147,24 @@ typedef struct NBDStructuredError { #define NBD_FLAG_C_NO_ZEROES (1 << 1) /* End handshake without zeroes. */ /* Option requests. */ -#define NBD_OPT_EXPORT_NAME (1) -#define NBD_OPT_ABORT (2) -#define NBD_OPT_LIST (3) -/* #define NBD_OPT_PEEK_EXPORT (4) not in use */ -#define NBD_OPT_STARTTLS (5) -#define NBD_OPT_INFO (6) -#define NBD_OPT_GO (7) -#define NBD_OPT_STRUCTURED_REPLY (8) +#define NBD_OPT_EXPORT_NAME (1) +#define NBD_OPT_ABORT (2) +#define NBD_OPT_LIST (3) +/* #define NBD_OPT_PEEK_EXPORT (4) not in use */ +#define NBD_OPT_STARTTLS (5) +#define NBD_OPT_INFO (6) +#define NBD_OPT_GO (7) +#define NBD_OPT_STRUCTURED_REPLY (8) +#define NBD_OPT_LIST_META_CONTEXT (9) +#define NBD_OPT_SET_META_CONTEXT (10) /* Option reply types. */ #define NBD_REP_ERR(value) ((UINT32_C(1) << 31) | (value)) -#define NBD_REP_ACK (1) /* Data sending finished. */ -#define NBD_REP_SERVER (2) /* Export description. */ -#define NBD_REP_INFO (3) /* NBD_OPT_INFO/GO. */ +#define NBD_REP_ACK (1) /* Data sending finished. */ +#define NBD_REP_SERVER (2) /* Export description. */ +#define NBD_REP_INFO (3) /* NBD_OPT_INFO/GO. */ +#define NBD_REP_META_CONTEXT (4) /* NBD_OPT_{LIST,SET}_META_CONTEXT */ #define NBD_REP_ERR_UNSUP NBD_REP_ERR(1) /* Unknown option */ #define NBD_REP_ERR_POLICY NBD_REP_ERR(2) /* Server denied */ @@ -163,6 +185,8 @@ typedef struct NBDStructuredError { #define NBD_CMD_FLAG_FUA (1 << 0) /* 'force unit access' during write */ #define NBD_CMD_FLAG_NO_HOLE (1 << 1) /* don't punch hole on zero run */ #define NBD_CMD_FLAG_DF (1 << 2) /* don't fragment structured read */ +#define NBD_CMD_FLAG_REQ_ONE (1 << 3) /* only one extent in BLOCK_STATUS + * reply chunk */ /* Supported request types */ enum { @@ -173,6 +197,7 @@ enum { NBD_CMD_TRIM = 4, /* 5 reserved for failed experiment NBD_CMD_CACHE */ NBD_CMD_WRITE_ZEROES = 6, + NBD_CMD_BLOCK_STATUS = 7, }; #define NBD_DEFAULT_PORT 10809 @@ -200,9 +225,15 @@ enum { #define NBD_REPLY_TYPE_NONE 0 #define NBD_REPLY_TYPE_OFFSET_DATA 1 #define NBD_REPLY_TYPE_OFFSET_HOLE 2 +#define NBD_REPLY_TYPE_BLOCK_STATUS 5 #define NBD_REPLY_TYPE_ERROR NBD_REPLY_ERR(1) #define NBD_REPLY_TYPE_ERROR_OFFSET NBD_REPLY_ERR(2) +/* Flags for extents (NBDExtent.flags) of NBD_REPLY_TYPE_BLOCK_STATUS, + * for base:allocation meta context */ +#define NBD_STATE_HOLE (1 << 0) +#define NBD_STATE_ZERO (1 << 1) + static inline bool nbd_reply_type_is_error(int type) { return type & (1 << 15); diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index 35ab757264..78308d1484 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -12,6 +12,7 @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -40,6 +41,8 @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -58,6 +61,8 @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index 0000000000..c6129d926b --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -0,0 +1,109 @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index 0a2b037c6b..3b613e364d 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -29,6 +29,7 @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -92,6 +93,7 @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index 0000000000..bb87157c5a --- /dev/null +++ b/include/hw/core/split-irq.h @@ -0,0 +1,57 @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index 4c4c2eaf9a..7a40e3ed26 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -50,7 +50,9 @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/include/hw/loader.h b/include/hw/loader.h index 5edbe02b1c..2504cc2259 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -162,16 +162,26 @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index 0000000000..faad0c9190 --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -0,0 +1,103 @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; + + MemoryRegion s_regs; + MemoryRegion ns_regs; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; + +#endif diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index 0000000000..eedf17ebc6 --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -0,0 +1,43 @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index 0000000000..fc8b806e4d --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -0,0 +1,101 @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index 52e068ec3e..2a291ca42d 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -12,6 +12,16 @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index fd900fcf19..3f6fc1b58a 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -22,6 +22,9 @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -41,3 +44,5 @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index fc9d617a76..9453588160 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -311,10 +311,36 @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index 0000000000..5ba4d8bc4a --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -0,0 +1,86 @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t tick_offset; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; |