diff options
Diffstat (limited to 'include')
34 files changed, 1024 insertions, 124 deletions
diff --git a/include/elf.h b/include/elf.h index 934dbbd6b3..28a5a638e0 100644 --- a/include/elf.h +++ b/include/elf.h @@ -61,7 +61,29 @@ typedef int64_t Elf64_Sxword; #define EF_MIPS_ABI 0x0000f000 #define EF_MIPS_FP64 0x00000200 #define EF_MIPS_NAN2008 0x00000400 -#define EF_MIPS_ARCH 0xf0000000 + +/* MIPS machine variant */ +#define EF_MIPS_MACH_NONE 0x00000000 /* A standard MIPS implementation */ +#define EF_MIPS_MACH_3900 0x00810000 /* Toshiba R3900 */ +#define EF_MIPS_MACH_4010 0x00820000 /* LSI R4010 */ +#define EF_MIPS_MACH_4100 0x00830000 /* NEC VR4100 */ +#define EF_MIPS_MACH_4650 0x00850000 /* MIPS R4650 */ +#define EF_MIPS_MACH_4120 0x00870000 /* NEC VR4120 */ +#define EF_MIPS_MACH_4111 0x00880000 /* NEC VR4111/VR4181 */ +#define EF_MIPS_MACH_SB1 0x008a0000 /* Broadcom SB-1 */ +#define EF_MIPS_MACH_OCTEON 0x008b0000 /* Cavium Networks Octeon */ +#define EF_MIPS_MACH_XLR 0x008c0000 /* RMI Xlr */ +#define EF_MIPS_MACH_OCTEON2 0x008d0000 /* Cavium Networks Octeon2 */ +#define EF_MIPS_MACH_OCTEON3 0x008e0000 /* Cavium Networks Octeon3 */ +#define EF_MIPS_MACH_5400 0x00910000 /* NEC VR5400 */ +#define EF_MIPS_MACH_5900 0x00920000 /* MIPS R5900 */ +#define EF_MIPS_MACH_5500 0x00980000 /* NEC VR5500 */ +#define EF_MIPS_MACH_9000 0x00990000 /* PMC-Sierra's RM9000 */ +#define EF_MIPS_MACH_LS2E 0x00a00000 /* ST Microelectronics Loongson 2E */ +#define EF_MIPS_MACH_LS2F 0x00a10000 /* ST Microelectronics Loongson 2F */ +#define EF_MIPS_MACH_LS3A 0x00a20000 /* ST Microelectronics Loongson 3A */ +#define EF_MIPS_MACH 0x00ff0000 /* EF_MIPS_MACH_xxx selection mask */ + /* These constants define the different elf file types */ #define ET_NONE 0 diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index da73e3bfed..5f78125582 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -502,8 +502,6 @@ hwaddr memory_region_section_get_iotlb(CPUState *cpu, hwaddr paddr, hwaddr xlat, int prot, target_ulong *address); -bool memory_region_is_unassigned(MemoryRegion *mr); - #endif /* vl.c */ diff --git a/include/exec/memory.h b/include/exec/memory.h index cd62029a7d..eb4f2fb249 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -164,15 +164,6 @@ struct MemoryRegionOps { uint64_t data, unsigned size, MemTxAttrs attrs); - /* Instruction execution pre-callback: - * @addr is the address of the access relative to the @mr. - * @size is the size of the area returned by the callback. - * @offset is the location of the pointer inside @mr. - * - * Returns a pointer to a location which contains guest code. - */ - void *(*request_ptr)(void *opaque, hwaddr addr, unsigned *size, - unsigned *offset); enum device_endian endianness; /* Guest-visible constraints: */ @@ -1695,32 +1686,6 @@ void mtree_info(fprintf_function mon_printf, void *f, bool flatview, bool dispatch_tree, bool owner); /** - * memory_region_request_mmio_ptr: request a pointer to an mmio - * MemoryRegion. If it is possible map a RAM MemoryRegion with this pointer. - * When the device wants to invalidate the pointer it will call - * memory_region_invalidate_mmio_ptr. - * - * @mr: #MemoryRegion to check - * @addr: address within that region - * - * Returns true on success, false otherwise. - */ -bool memory_region_request_mmio_ptr(MemoryRegion *mr, hwaddr addr); - -/** - * memory_region_invalidate_mmio_ptr: invalidate the pointer to an mmio - * previously requested. - * In the end that means that if something wants to execute from this area it - * will need to request the pointer again. - * - * @mr: #MemoryRegion associated to the pointer. - * @offset: offset within the memory region - * @size: size of that area. - */ -void memory_region_invalidate_mmio_ptr(MemoryRegion *mr, hwaddr offset, - unsigned size); - -/** * memory_region_dispatch_read: perform a read directly to the specified * MemoryRegion. * diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index 78308d1484..2ba24953b6 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -43,6 +43,7 @@ typedef struct { * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) + * + Property "enable-bitband": expose bitbanded IO */ typedef struct ARMv7MState { /*< private >*/ @@ -63,6 +64,7 @@ typedef struct ARMv7MState { MemoryRegion *board_memory; Object *idau; uint32_t init_svtor; + bool enable_bitband; } ARMv7MState; #endif diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h new file mode 100644 index 0000000000..5897217194 --- /dev/null +++ b/include/hw/arm/fsl-imx6ul.h @@ -0,0 +1,339 @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6ul SoC definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef FSL_IMX6UL_H +#define FSL_IMX6UL_H + +#include "hw/arm/arm.h" +#include "hw/cpu/a15mpcore.h" +#include "hw/misc/imx6ul_ccm.h" +#include "hw/misc/imx6_src.h" +#include "hw/misc/imx7_snvs.h" +#include "hw/misc/imx7_gpr.h" +#include "hw/intc/imx_gpcv2.h" +#include "hw/misc/imx2_wdt.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" +#include "hw/net/imx_fec.h" +#include "exec/memory.h" +#include "cpu.h" + +#define TYPE_FSL_IMX6UL "fsl,imx6ul" +#define FSL_IMX6UL(obj) OBJECT_CHECK(FslIMX6ULState, (obj), TYPE_FSL_IMX6UL) + +enum FslIMX6ULConfiguration { + FSL_IMX6UL_NUM_CPUS = 1, + FSL_IMX6UL_NUM_UARTS = 8, + FSL_IMX6UL_NUM_ETHS = 2, + FSL_IMX6UL_ETH_NUM_TX_RINGS = 2, + FSL_IMX6UL_NUM_USDHCS = 2, + FSL_IMX6UL_NUM_WDTS = 3, + FSL_IMX6UL_NUM_GPTS = 2, + FSL_IMX6UL_NUM_EPITS = 2, + FSL_IMX6UL_NUM_IOMUXCS = 2, + FSL_IMX6UL_NUM_GPIOS = 5, + FSL_IMX6UL_NUM_I2CS = 4, + FSL_IMX6UL_NUM_ECSPIS = 4, + FSL_IMX6UL_NUM_ADCS = 2, +}; + +typedef struct FslIMX6ULState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu[FSL_IMX6UL_NUM_CPUS]; + A15MPPrivState a7mpcore; + IMXGPTState gpt[FSL_IMX6UL_NUM_GPTS]; + IMXEPITState epit[FSL_IMX6UL_NUM_EPITS]; + IMXGPIOState gpio[FSL_IMX6UL_NUM_GPIOS]; + IMX6ULCCMState ccm; + IMX6SRCState src; + IMX7SNVSState snvs; + IMXGPCv2State gpcv2; + IMX7GPRState gpr; + IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; + IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; + IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; + IMXFECState eth[FSL_IMX6UL_NUM_ETHS]; + SDHCIState usdhc[FSL_IMX6UL_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_alias; +} FslIMX6ULState; + +enum FslIMX6ULMemoryMap { + FSL_IMX6UL_MMDC_ADDR = 0x80000000, + FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + + FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + + /* AIPS-2 */ + FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, + FSL_IMX6UL_UART4_ADDR = 0x021F0000, + FSL_IMX6UL_UART3_ADDR = 0x021EC000, + FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, + FSL_IMX6UL_I2C2_ADDR = 0x021A4000, + FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, + FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, + FSL_IMX6UL_USDHC1_ADDR = 0x02190000, + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + + /* AIPS-1 */ + FSL_IMX6UL_PWM8_ADDR = 0x020FC000, + FSL_IMX6UL_PWM7_ADDR = 0x020F8000, + FSL_IMX6UL_PWM6_ADDR = 0x020F4000, + FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, + FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, + FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, + FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, + FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, + FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, + FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, + FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, + FSL_IMX6UL_PWM3_ADDR = 0x02088000, + FSL_IMX6UL_PWM2_ADDR = 0x02084000, + FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, + FSL_IMX6UL_SAI2_ADDR = 0x0202C000, + FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_UART8_ADDR = 0x02024000, + FSL_IMX6UL_UART1_ADDR = 0x02020000, + FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, + FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, + FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, + FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + + FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, + FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + + FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, + + FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_ROM_ADDR = 0x00000000, + FSL_IMX6UL_ROM_SIZE = 0x00018000, +}; + +enum FslIMX6ULIRQs { + FSL_IMX6UL_IOMUXC_IRQ = 0, + FSL_IMX6UL_DAP_IRQ = 1, + FSL_IMX6UL_SDMA_IRQ = 2, + FSL_IMX6UL_TSC_IRQ = 3, + FSL_IMX6UL_SNVS_IRQ = 4, + FSL_IMX6UL_LCDIF_IRQ = 5, + FSL_IMX6UL_BEE_IRQ = 6, + FSL_IMX6UL_CSI_IRQ = 7, + FSL_IMX6UL_PXP_IRQ = 8, + FSL_IMX6UL_SCTR1_IRQ = 9, + FSL_IMX6UL_SCTR2_IRQ = 10, + FSL_IMX6UL_WDOG3_IRQ = 11, + FSL_IMX6UL_APBH_DMA_IRQ = 13, + FSL_IMX6UL_WEIM_IRQ = 14, + FSL_IMX6UL_RAWNAND1_IRQ = 15, + FSL_IMX6UL_RAWNAND2_IRQ = 16, + FSL_IMX6UL_UART6_IRQ = 17, + FSL_IMX6UL_SRTC_IRQ = 19, + FSL_IMX6UL_SRTC_SEC_IRQ = 20, + FSL_IMX6UL_CSU_IRQ = 21, + FSL_IMX6UL_USDHC1_IRQ = 22, + FSL_IMX6UL_USDHC2_IRQ = 23, + FSL_IMX6UL_SAI3_IRQ = 24, + FSL_IMX6UL_SAI32_IRQ = 25, + + FSL_IMX6UL_UART1_IRQ = 26, + FSL_IMX6UL_UART2_IRQ = 27, + FSL_IMX6UL_UART3_IRQ = 28, + FSL_IMX6UL_UART4_IRQ = 29, + FSL_IMX6UL_UART5_IRQ = 30, + + FSL_IMX6UL_ECSPI1_IRQ = 31, + FSL_IMX6UL_ECSPI2_IRQ = 32, + FSL_IMX6UL_ECSPI3_IRQ = 33, + FSL_IMX6UL_ECSPI4_IRQ = 34, + + FSL_IMX6UL_I2C4_IRQ = 35, + FSL_IMX6UL_I2C1_IRQ = 36, + FSL_IMX6UL_I2C2_IRQ = 37, + FSL_IMX6UL_I2C3_IRQ = 38, + + FSL_IMX6UL_UART7_IRQ = 39, + FSL_IMX6UL_UART8_IRQ = 40, + + FSL_IMX6UL_USB1_IRQ = 42, + FSL_IMX6UL_USB2_IRQ = 43, + FSL_IMX6UL_USB_PHY1_IRQ = 44, + FSL_IMX6UL_USB_PHY2_IRQ = 44, + + FSL_IMX6UL_CAAM_JQ2_IRQ = 46, + FSL_IMX6UL_CAAM_ERR_IRQ = 47, + FSL_IMX6UL_CAAM_RTIC_IRQ = 48, + FSL_IMX6UL_TEMP_IRQ = 49, + FSL_IMX6UL_ASRC_IRQ = 50, + FSL_IMX6UL_SPDIF_IRQ = 52, + FSL_IMX6UL_PMU_REG_IRQ = 54, + FSL_IMX6UL_GPT1_IRQ = 55, + + FSL_IMX6UL_EPIT1_IRQ = 56, + FSL_IMX6UL_EPIT2_IRQ = 57, + + FSL_IMX6UL_GPIO1_INT7_IRQ = 58, + FSL_IMX6UL_GPIO1_INT6_IRQ = 59, + FSL_IMX6UL_GPIO1_INT5_IRQ = 60, + FSL_IMX6UL_GPIO1_INT4_IRQ = 61, + FSL_IMX6UL_GPIO1_INT3_IRQ = 62, + FSL_IMX6UL_GPIO1_INT2_IRQ = 63, + FSL_IMX6UL_GPIO1_INT1_IRQ = 64, + FSL_IMX6UL_GPIO1_INT0_IRQ = 65, + FSL_IMX6UL_GPIO1_LOW_IRQ = 66, + FSL_IMX6UL_GPIO1_HIGH_IRQ = 67, + FSL_IMX6UL_GPIO2_LOW_IRQ = 68, + FSL_IMX6UL_GPIO2_HIGH_IRQ = 69, + FSL_IMX6UL_GPIO3_LOW_IRQ = 70, + FSL_IMX6UL_GPIO3_HIGH_IRQ = 71, + FSL_IMX6UL_GPIO4_LOW_IRQ = 72, + FSL_IMX6UL_GPIO4_HIGH_IRQ = 73, + FSL_IMX6UL_GPIO5_LOW_IRQ = 74, + FSL_IMX6UL_GPIO5_HIGH_IRQ = 75, + + FSL_IMX6UL_WDOG1_IRQ = 80, + FSL_IMX6UL_WDOG2_IRQ = 81, + + FSL_IMX6UL_KPP_IRQ = 82, + + FSL_IMX6UL_PWM1_IRQ = 83, + FSL_IMX6UL_PWM2_IRQ = 84, + FSL_IMX6UL_PWM3_IRQ = 85, + FSL_IMX6UL_PWM4_IRQ = 86, + + FSL_IMX6UL_CCM1_IRQ = 87, + FSL_IMX6UL_CCM2_IRQ = 88, + + FSL_IMX6UL_GPC_IRQ = 89, + + FSL_IMX6UL_SRC_IRQ = 91, + + FSL_IMX6UL_CPU_PERF_IRQ = 94, + FSL_IMX6UL_CPU_CTI_IRQ = 95, + + FSL_IMX6UL_SRC_WDOG_IRQ = 96, + + FSL_IMX6UL_SAI1_IRQ = 97, + FSL_IMX6UL_SAI2_IRQ = 98, + + FSL_IMX6UL_ADC1_IRQ = 100, + FSL_IMX6UL_ADC2_IRQ = 101, + + FSL_IMX6UL_SJC_IRQ = 104, + + FSL_IMX6UL_CAAM_RING0_IRQ = 105, + FSL_IMX6UL_CAAM_RING1_IRQ = 106, + + FSL_IMX6UL_QSPI_IRQ = 107, + + FSL_IMX6UL_TZASC_IRQ = 108, + + FSL_IMX6UL_GPT2_IRQ = 109, + + FSL_IMX6UL_CAN1_IRQ = 110, + FSL_IMX6UL_CAN2_IRQ = 111, + + FSL_IMX6UL_SIM1_IRQ = 112, + FSL_IMX6UL_SIM2_IRQ = 113, + + FSL_IMX6UL_PWM5_IRQ = 114, + FSL_IMX6UL_PWM6_IRQ = 115, + FSL_IMX6UL_PWM7_IRQ = 116, + FSL_IMX6UL_PWM8_IRQ = 117, + + FSL_IMX6UL_ENET1_IRQ = 118, + FSL_IMX6UL_ENET1_TIMER_IRQ = 119, + FSL_IMX6UL_ENET2_IRQ = 120, + FSL_IMX6UL_ENET2_TIMER_IRQ = 121, + + FSL_IMX6UL_PMU_CORE_IRQ = 127, + FSL_IMX6UL_MAX_IRQ = 128, +}; + +#endif /* FSL_IMX6UL_H */ diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index 9a870ccb6a..4cc57a7ef6 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -42,7 +42,7 @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GICV3_MAINT_IRQ 9 +#define ARCH_GIC_MAINT_IRQ 9 #define ARCH_TIMER_VIRT_IRQ 11 #define ARCH_TIMER_S_EL1_IRQ 13 @@ -60,6 +60,8 @@ enum { VIRT_GIC_DIST, VIRT_GIC_CPU, VIRT_GIC_V2M, + VIRT_GIC_HYP, + VIRT_GIC_VCPU, VIRT_GIC_ITS, VIRT_GIC_REDIST, VIRT_GIC_REDIST2, diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index 82b6ec2486..98f925ab84 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -53,7 +53,7 @@ #define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000 #define XLNX_ZYNQMP_OCM_RAM_SIZE 0x10000 -#define XLNX_ZYNQMP_GIC_REGIONS 2 +#define XLNX_ZYNQMP_GIC_REGIONS 6 /* ZynqMP maps the ARM GIC regions (GICC, GICD ...) at consecutive 64k offsets * and under-decodes the 64k region. This mirrors the 4k regions to every 4k @@ -62,7 +62,7 @@ */ #define XLNX_ZYNQMP_GIC_REGION_SIZE 0x1000 -#define XLNX_ZYNQMP_GIC_ALIASES (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE - 1) +#define XLNX_ZYNQMP_GIC_ALIASES (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE) #define XLNX_ZYNQMP_MAX_LOW_RAM_SIZE 0x80000000ull diff --git a/include/hw/block/block.h b/include/hw/block/block.h index d4f4dfffab..e9f9e2223f 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -72,7 +72,6 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) /* Configuration helpers */ -void blkconf_serial(BlockConf *conf, char **serial); bool blkconf_geometry(BlockConf *conf, int *trans, unsigned cyls_max, unsigned heads_max, unsigned secs_max, Error **errp); diff --git a/include/hw/boards.h b/include/hw/boards.h index d139a431a6..f82f28468b 100644 --- a/include/hw/boards.h +++ b/include/hw/boards.h @@ -206,6 +206,7 @@ struct MachineClass { bool auto_enable_numa_with_memhp; void (*numa_auto_assign_ram)(MachineClass *mc, NodeInfo *nodes, int nb_nodes, ram_addr_t size); + bool ignore_boot_device_suffixes; HotplugHandler *(*get_hotplug_handler)(MachineState *machine, DeviceState *dev); diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h index ee80da12e6..c8b74284f8 100644 --- a/include/hw/char/imx_serial.h +++ b/include/hw/char/imx_serial.h @@ -68,6 +68,7 @@ #define UCR2_RXEN (1<<1) /* Receiver enable */ #define UCR2_SRST (1<<0) /* Reset complete */ +#define UCR4_DREN BIT(0) /* Receive Data Ready interrupt enable */ #define UCR4_TCEN BIT(3) /* TX complete interrupt enable */ #define UTS1_TXEMPTY (1<<6) diff --git a/include/hw/compat.h b/include/hw/compat.h index c08f4040bb..6f4d5fc647 100644 --- a/include/hw/compat.h +++ b/include/hw/compat.h @@ -1,6 +1,9 @@ #ifndef HW_COMPAT_H #define HW_COMPAT_H +#define HW_COMPAT_3_0 \ + /* empty */ + #define HW_COMPAT_2_12 \ {\ .driver = "migration",\ diff --git a/include/hw/dma/pl080.h b/include/hw/dma/pl080.h new file mode 100644 index 0000000000..9d4b3df143 --- /dev/null +++ b/include/hw/dma/pl080.h @@ -0,0 +1,71 @@ +/* + * ARM PrimeCell PL080/PL081 DMA controller + * + * Copyright (c) 2006 CodeSourcery. + * Copyright (c) 2018 Linaro Limited + * Written by Paul Brook, Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm PrimeCell PL080/PL081 DMA controller: + * The PL080 TRM is: + * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0196g/DDI0196.pdf + * and the PL081 TRM is: + * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0218e/DDI0218.pdf + * + * QEMU interface: + * + sysbus IRQ 0: DMACINTR combined interrupt line + * + sysbus IRQ 1: DMACINTERR error interrupt request + * + sysbus IRQ 2: DMACINTTC count interrupt request + * + sysbus MMIO region 0: MemoryRegion for the device's registers + * + QOM property "downstream": MemoryRegion defining where DMA + * bus master transactions are made + */ + +#ifndef HW_DMA_PL080_H +#define HW_DMA_PL080_H + +#include "hw/sysbus.h" + +#define PL080_MAX_CHANNELS 8 + +typedef struct { + uint32_t src; + uint32_t dest; + uint32_t lli; + uint32_t ctrl; + uint32_t conf; +} pl080_channel; + +#define TYPE_PL080 "pl080" +#define TYPE_PL081 "pl081" +#define PL080(obj) OBJECT_CHECK(PL080State, (obj), TYPE_PL080) + +typedef struct PL080State { + SysBusDevice parent_obj; + + MemoryRegion iomem; + uint8_t tc_int; + uint8_t tc_mask; + uint8_t err_int; + uint8_t err_mask; + uint32_t conf; + uint32_t sync; + uint32_t req_single; + uint32_t req_burst; + pl080_channel chan[PL080_MAX_CHANNELS]; + int nchannels; + /* Flag to avoid recursive DMA invocations. */ + int running; + qemu_irq irq; + qemu_irq interr; + qemu_irq inttc; + + MemoryRegion *downstream; + AddressSpace downstream_as; +} PL080State; + +#endif diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index af3ca18e2f..b5585fec45 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -30,6 +30,8 @@ #define GIC_NR_SGIS 16 /* Maximum number of possible CPU interfaces, determined by GIC architecture */ #define GIC_NCPU 8 +/* Maximum number of possible CPU interfaces with their respective vCPU */ +#define GIC_NCPU_VCPU (GIC_NCPU * 2) #define MAX_NR_GROUP_PRIO 128 #define GIC_NR_APRS (MAX_NR_GROUP_PRIO / 32) @@ -37,6 +39,17 @@ #define GIC_MIN_BPR 0 #define GIC_MIN_ABPR (GIC_MIN_BPR + 1) +/* Architectural maximum number of list registers in the virtual interface */ +#define GIC_MAX_LR 64 + +/* Only 32 priority levels and 32 preemption levels in the vCPU interfaces */ +#define GIC_VIRT_MAX_GROUP_PRIO_BITS 5 +#define GIC_VIRT_MAX_NR_GROUP_PRIO (1 << GIC_VIRT_MAX_GROUP_PRIO_BITS) +#define GIC_VIRT_NR_APRS (GIC_VIRT_MAX_NR_GROUP_PRIO / 32) + +#define GIC_VIRT_MIN_BPR 2 +#define GIC_VIRT_MIN_ABPR (GIC_VIRT_MIN_BPR + 1) + typedef struct gic_irq_state { /* The enable bits are only banked for per-cpu interrupts. */ uint8_t enabled; @@ -57,6 +70,8 @@ typedef struct GICState { qemu_irq parent_fiq[GIC_NCPU]; qemu_irq parent_virq[GIC_NCPU]; qemu_irq parent_vfiq[GIC_NCPU]; + qemu_irq maintenance_irq[GIC_NCPU]; + /* GICD_CTLR; for a GIC with the security extensions the NS banked version * of this register is just an alias of bit 1 of the S banked version. */ @@ -64,7 +79,7 @@ typedef struct GICState { /* GICC_CTLR; again, the NS banked version is just aliases of bits of * the S banked register, so our state only needs to store the S version. */ - uint32_t cpu_ctlr[GIC_NCPU]; + uint32_t cpu_ctlr[GIC_NCPU_VCPU]; gic_irq_state irq_state[GIC_MAXIRQ]; uint8_t irq_target[GIC_MAXIRQ]; @@ -78,9 +93,9 @@ typedef struct GICState { */ uint8_t sgi_pending[GIC_NR_SGIS][GIC_NCPU]; - uint16_t priority_mask[GIC_NCPU]; - uint16_t running_priority[GIC_NCPU]; - uint16_t current_pending[GIC_NCPU]; + uint16_t priority_mask[GIC_NCPU_VCPU]; + uint16_t running_priority[GIC_NCPU_VCPU]; + uint16_t current_pending[GIC_NCPU_VCPU]; /* If we present the GICv2 without security extensions to a guest, * the guest can configure the GICC_CTLR to configure group 1 binary point @@ -88,8 +103,8 @@ typedef struct GICState { * For a GIC with Security Extensions we use use bpr for the * secure copy and abpr as storage for the non-secure copy of the register. */ - uint8_t bpr[GIC_NCPU]; - uint8_t abpr[GIC_NCPU]; + uint8_t bpr[GIC_NCPU_VCPU]; + uint8_t abpr[GIC_NCPU_VCPU]; /* The APR is implementation defined, so we choose a layout identical to * the KVM ABI layout for QEMU's implementation of the gic: @@ -100,6 +115,15 @@ typedef struct GICState { uint32_t apr[GIC_NR_APRS][GIC_NCPU]; uint32_t nsapr[GIC_NR_APRS][GIC_NCPU]; + /* Virtual interface control registers */ + uint32_t h_hcr[GIC_NCPU]; + uint32_t h_misr[GIC_NCPU]; + uint32_t h_lr[GIC_MAX_LR][GIC_NCPU]; + uint32_t h_apr[GIC_NCPU]; + + /* Number of LRs implemented in this GIC instance */ + uint32_t num_lrs; + uint32_t num_cpu; MemoryRegion iomem; /* Distributor */ @@ -108,9 +132,13 @@ typedef struct GICState { */ struct GICState *backref[GIC_NCPU]; MemoryRegion cpuiomem[GIC_NCPU + 1]; /* CPU interfaces */ + MemoryRegion vifaceiomem[GIC_NCPU + 1]; /* Virtual interfaces */ + MemoryRegion vcpuiomem; /* vCPU interface */ + uint32_t num_irq; uint32_t revision; bool security_extn; + bool virt_extn; bool irq_reset_nonsecure; /* configure IRQs as group 1 (NS) on reset? */ int dev_fd; /* kvm device fd if backed by kvm vgic support */ Error *migration_blocker; @@ -134,6 +162,7 @@ typedef struct ARMGICCommonClass { } ARMGICCommonClass; void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, - const MemoryRegionOps *ops); + const MemoryRegionOps *ops, + const MemoryRegionOps *virt_ops); #endif diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index 8bc29112e3..a472c9b8f0 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -57,6 +57,7 @@ typedef struct NVICState { VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; /* The PRIGROUP field in AIRCR is banked */ uint32_t prigroup[M_REG_NUM_BANKS]; + uint8_t num_prio_bits; /* v8M NVIC_ITNS state (stored as a bool per bit) */ bool itns[NVIC_MAX_VECTORS]; diff --git a/include/hw/loader.h b/include/hw/loader.h index e98b84b8f9..3c112975f4 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -28,6 +28,18 @@ ssize_t load_image_size(const char *filename, void *addr, size_t size); int load_image_targphys_as(const char *filename, hwaddr addr, uint64_t max_sz, AddressSpace *as); +/**load_targphys_hex_as: + * @filename: Path to the .hex file + * @entry: Store the entry point given by the .hex file + * @as: The AddressSpace to load the .hex file to. The value of + * address_space_memory is used if nothing is supplied here. + * + * Load a fixed .hex file into memory. + * + * Returns the size of the loaded .hex file on success, -1 otherwise. + */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as); + /** load_image_targphys: * Same as load_image_targphys_as(), but doesn't allow the caller to specify * an AddressSpace. @@ -225,6 +237,25 @@ int rom_check_and_register_reset(void); void rom_set_fw(FWCfgState *f); void rom_set_order_override(int order); void rom_reset_order_override(void); + +/** + * rom_transaction_begin: + * + * Call this before of a series of rom_add_*() calls. Call + * rom_transaction_end() afterwards to commit or abort. These functions are + * useful for undoing a series of rom_add_*() calls if image file loading fails + * partway through. + */ +void rom_transaction_begin(void); + +/** + * rom_transaction_end: + * @commit: true to commit added roms, false to drop added roms + * + * Call this after a series of rom_add_*() calls. See rom_transaction_begin(). + */ +void rom_transaction_end(bool commit); + int rom_copy(uint8_t *dest, hwaddr addr, size_t size); void *rom_ptr(hwaddr addr, size_t size); void hmp_info_roms(Monitor *mon, const QDict *qdict); diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index 551c8afdf4..b3c926acae 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -14,7 +14,7 @@ #define TYPE_ASPEED_SDMC "aspeed.sdmc" #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) -#define ASPEED_SDMC_NR_REGS (0x8 >> 2) +#define ASPEED_SDMC_NR_REGS (0x174 >> 2) typedef struct AspeedSDMCState { /*< private >*/ @@ -27,6 +27,8 @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint64_t max_ram_size; + uint32_t fixed_conf; } AspeedSDMCState; diff --git a/include/hw/misc/imx6ul_ccm.h b/include/hw/misc/imx6ul_ccm.h new file mode 100644 index 0000000000..377ddca244 --- /dev/null +++ b/include/hw/misc/imx6ul_ccm.h @@ -0,0 +1,226 @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (C) 2018 by Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX6UL_CCM_H +#define IMX6UL_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +#define CCM_CCR 0 +#define CCM_CCDR 1 +#define CCM_CSR 2 +#define CCM_CCSR 3 +#define CCM_CACRR 4 +#define CCM_CBCDR 5 +#define CCM_CBCMR 6 +#define CCM_CSCMR1 7 +#define CCM_CSCMR2 8 +#define CCM_CSCDR1 9 +#define CCM_CS1CDR 10 +#define CCM_CS2CDR 11 +#define CCM_CDCDR 12 +#define CCM_CHSCCDR 13 +#define CCM_CSCDR2 14 +#define CCM_CSCDR3 15 +#define CCM_CDHIPR 18 +#define CCM_CTOR 20 +#define CCM_CLPCR 21 +#define CCM_CISR 22 +#define CCM_CIMR 23 +#define CCM_CCOSR 24 +#define CCM_CGPR 25 +#define CCM_CCGR0 26 +#define CCM_CCGR1 27 +#define CCM_CCGR2 28 +#define CCM_CCGR3 29 +#define CCM_CCGR4 30 +#define CCM_CCGR5 31 +#define CCM_CCGR6 32 +#define CCM_CMEOR 34 +#define CCM_MAX 35 + +#define CCM_ANALOG_PLL_ARM 0 +#define CCM_ANALOG_PLL_ARM_SET 1 +#define CCM_ANALOG_PLL_ARM_CLR 2 +#define CCM_ANALOG_PLL_ARM_TOG 3 +#define CCM_ANALOG_PLL_USB1 4 +#define CCM_ANALOG_PLL_USB1_SET 5 +#define CCM_ANALOG_PLL_USB1_CLR 6 +#define CCM_ANALOG_PLL_USB1_TOG 7 +#define CCM_ANALOG_PLL_USB2 8 +#define CCM_ANALOG_PLL_USB2_SET 9 +#define CCM_ANALOG_PLL_USB2_CLR 10 +#define CCM_ANALOG_PLL_USB2_TOG 11 +#define CCM_ANALOG_PLL_SYS 12 +#define CCM_ANALOG_PLL_SYS_SET 13 +#define CCM_ANALOG_PLL_SYS_CLR 14 +#define CCM_ANALOG_PLL_SYS_TOG 15 +#define CCM_ANALOG_PLL_SYS_SS 16 +#define CCM_ANALOG_PLL_SYS_NUM 20 +#define CCM_ANALOG_PLL_SYS_DENOM 24 +#define CCM_ANALOG_PLL_AUDIO 28 +#define CCM_ANALOG_PLL_AUDIO_SET 29 +#define CCM_ANALOG_PLL_AUDIO_CLR 30 +#define CCM_ANALOG_PLL_AUDIO_TOG 31 +#define CCM_ANALOG_PLL_AUDIO_NUM 32 +#define CCM_ANALOG_PLL_AUDIO_DENOM 36 +#define CCM_ANALOG_PLL_VIDEO 40 +#define CCM_ANALOG_PLL_VIDEO_SET 41 +#define CCM_ANALOG_PLL_VIDEO_CLR 42 +#define CCM_ANALOG_PLL_VIDEO_TOG 44 +#define CCM_ANALOG_PLL_VIDEO_NUM 46 +#define CCM_ANALOG_PLL_VIDEO_DENOM 48 +#define CCM_ANALOG_PLL_ENET 56 +#define CCM_ANALOG_PLL_ENET_SET 57 +#define CCM_ANALOG_PLL_ENET_CLR 58 +#define CCM_ANALOG_PLL_ENET_TOG 59 +#define CCM_ANALOG_PFD_480 60 +#define CCM_ANALOG_PFD_480_SET 61 +#define CCM_ANALOG_PFD_480_CLR 62 +#define CCM_ANALOG_PFD_480_TOG 63 +#define CCM_ANALOG_PFD_528 64 +#define CCM_ANALOG_PFD_528_SET 65 +#define CCM_ANALOG_PFD_528_CLR 66 +#define CCM_ANALOG_PFD_528_TOG 67 + +/* PMU registers */ +#define PMU_REG_1P1 68 +#define PMU_REG_3P0 72 +#define PMU_REG_2P5 76 +#define PMU_REG_CORE 80 + +#define CCM_ANALOG_MISC0 84 +#define PMU_MISC0 CCM_ANALOG_MISC0 +#define CCM_ANALOG_MISC0_SET 85 +#define PMU_MISC0_SET CCM_ANALOG_MISC0_SET +#define CCM_ANALOG_MISC0_CLR 86 +#define PMU_MISC0_CLR CCM_ANALOG_MISC0_CLR +#define CCM_ANALOG_MISC0_TOG 87 +#define PMU_MISC0_TOG CCM_ANALOG_MISC0_TOG + +#define CCM_ANALOG_MISC1 88 +#define PMU_MISC1 CCM_ANALOG_MISC1 +#define CCM_ANALOG_MISC1_SET 89 +#define PMU_MISC1_SET CCM_ANALOG_MISC1_SET +#define CCM_ANALOG_MISC1_CLR 90 +#define PMU_MISC1_CLR CCM_ANALOG_MISC1_CLR +#define CCM_ANALOG_MISC1_TOG 91 +#define PMU_MISC1_TOG CCM_ANALOG_MISC1_TOG + +#define CCM_ANALOG_MISC2 92 +#define PMU_MISC2 CCM_ANALOG_MISC2 +#define CCM_ANALOG_MISC2_SET 93 +#define PMU_MISC2_SET CCM_ANALOG_MISC2_SET +#define CCM_ANALOG_MISC2_CLR 94 +#define PMU_MISC2_CLR CCM_ANALOG_MISC2_CLR +#define CCM_ANALOG_MISC2_TOG 95 +#define PMU_MISC2_TOG CCM_ANALOG_MISC2_TOG + +#define TEMPMON_TEMPSENSE0 96 +#define TEMPMON_TEMPSENSE0_SET 97 +#define TEMPMON_TEMPSENSE0_CLR 98 +#define TEMPMON_TEMPSENSE0_TOG 99 +#define TEMPMON_TEMPSENSE1 100 +#define TEMPMON_TEMPSENSE1_SET 101 +#define TEMPMON_TEMPSENSE1_CLR 102 +#define TEMPMON_TEMPSENSE1_TOG 103 +#define TEMPMON_TEMPSENSE2 164 +#define TEMPMON_TEMPSENSE2_SET 165 +#define TEMPMON_TEMPSENSE2_CLR 166 +#define TEMPMON_TEMPSENSE2_TOG 167 + +#define PMU_LOWPWR_CTRL 155 +#define PMU_LOWPWR_CTRL_SET 156 +#define PMU_LOWPWR_CTRL_CLR 157 +#define PMU_LOWPWR_CTRL_TOG 158 + +#define USB_ANALOG_USB1_VBUS_DETECT 104 +#define USB_ANALOG_USB1_VBUS_DETECT_SET 105 +#define USB_ANALOG_USB1_VBUS_DETECT_CLR 106 +#define USB_ANALOG_USB1_VBUS_DETECT_TOG 107 +#define USB_ANALOG_USB1_CHRG_DETECT 108 +#define USB_ANALOG_USB1_CHRG_DETECT_SET 109 +#define USB_ANALOG_USB1_CHRG_DETECT_CLR 110 +#define USB_ANALOG_USB1_CHRG_DETECT_TOG 111 +#define USB_ANALOG_USB1_VBUS_DETECT_STAT 112 +#define USB_ANALOG_USB1_CHRG_DETECT_STAT 116 +#define USB_ANALOG_USB1_MISC 124 +#define USB_ANALOG_USB1_MISC_SET 125 +#define USB_ANALOG_USB1_MISC_CLR 126 +#define USB_ANALOG_USB1_MISC_TOG 127 +#define USB_ANALOG_USB2_VBUS_DETECT 128 +#define USB_ANALOG_USB2_VBUS_DETECT_SET 129 +#define USB_ANALOG_USB2_VBUS_DETECT_CLR 130 +#define USB_ANALOG_USB2_VBUS_DETECT_TOG 131 +#define USB_ANALOG_USB2_CHRG_DETECT 132 +#define USB_ANALOG_USB2_CHRG_DETECT_SET 133 +#define USB_ANALOG_USB2_CHRG_DETECT_CLR 134 +#define USB_ANALOG_USB2_CHRG_DETECT_TOG 135 +#define USB_ANALOG_USB2_VBUS_DETECT_STAT 136 +#define USB_ANALOG_USB2_CHRG_DETECT_STAT 140 +#define USB_ANALOG_USB2_MISC 148 +#define USB_ANALOG_USB2_MISC_SET 149 +#define USB_ANALOG_USB2_MISC_CLR 150 +#define USB_ANALOG_USB2_MISC_TOG 151 +#define USB_ANALOG_DIGPROG 152 +#define CCM_ANALOG_MAX 4096 + +/* CCM_CBCMR */ +#define R_CBCMR_PRE_PERIPH_CLK_SEL_SHIFT (18) +#define R_CBCMR_PRE_PERIPH_CLK_SEL_LENGTH (2) +#define R_CBCMR_PERIPH_CLK2_SEL_SHIFT (12) +#define R_CBCMR_PERIPH_CLK2_SEL_LENGTH (2) + +/* CCM_CBCDR */ +#define R_CBCDR_AHB_PODF_SHIFT (10) +#define R_CBCDR_AHB_PODF_LENGTH (3) +#define R_CBCDR_IPG_PODF_SHIFT (8) +#define R_CBCDR_IPG_PODF_LENGTH (2) +#define R_CBCDR_PERIPH_CLK_SEL_SHIFT (25) +#define R_CBCDR_PERIPH_CLK_SEL_LENGTH (1) +#define R_CBCDR_PERIPH_CLK2_PODF_SHIFT (27) +#define R_CBCDR_PERIPH_CLK2_PODF_LENGTH (3) + +/* CCM_CSCMR1 */ +#define R_CSCMR1_PERCLK_PODF_SHIFT (0) +#define R_CSCMR1_PERCLK_PODF_LENGTH (6) +#define R_CSCMR1_PERCLK_CLK_SEL_SHIFT (6) +#define R_CSCMR1_PERCLK_CLK_SEL_LENGTH (1) + +/* CCM_ANALOG_PFD_528 */ +#define R_ANALOG_PFD_528_PFD0_FRAC_SHIFT (0) +#define R_ANALOG_PFD_528_PFD0_FRAC_LENGTH (6) +#define R_ANALOG_PFD_528_PFD2_FRAC_SHIFT (16) +#define R_ANALOG_PFD_528_PFD2_FRAC_LENGTH (6) + +/* CCM_ANALOG_PLL_SYS */ +#define R_ANALOG_PLL_SYS_DIV_SELECT_SHIFT (0) +#define R_ANALOG_PLL_SYS_DIV_SELECT_LENGTH (1) + +#define CCM_ANALOG_PLL_LOCK (1 << 31); + +#define TYPE_IMX6UL_CCM "imx6ul.ccm" +#define IMX6UL_CCM(obj) OBJECT_CHECK(IMX6ULCCMState, (obj), TYPE_IMX6UL_CCM) + +typedef struct IMX6ULCCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion container; + MemoryRegion ioccm; + MemoryRegion ioanalog; + + uint32_t ccm[CCM_MAX]; + uint32_t analog[CCM_ANALOG_MAX]; + +} IMX6ULCCMState; + +#endif /* IMX6UL_CCM_H */ diff --git a/include/hw/misc/mmio_interface.h b/include/hw/misc/mmio_interface.h deleted file mode 100644 index 90d34fb228..0000000000 --- a/include/hw/misc/mmio_interface.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * mmio_interface.h - * - * Copyright (C) 2017 : GreenSocs - * http://www.greensocs.com/ , email: info@greensocs.com - * - * Developed by : - * Frederic Konrad <fred.konrad@greensocs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option)any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see <http://www.gnu.org/licenses/>. - * - */ - -#ifndef MMIO_INTERFACE_H -#define MMIO_INTERFACE_H - -#include "exec/memory.h" - -#define TYPE_MMIO_INTERFACE "mmio_interface" -#define MMIO_INTERFACE(obj) OBJECT_CHECK(MMIOInterface, (obj), \ - TYPE_MMIO_INTERFACE) - -typedef struct MMIOInterface { - DeviceState parent_obj; - - MemoryRegion *subregion; - MemoryRegion ram_mem; - uint64_t start; - uint64_t end; - bool ro; - uint64_t id; - void *host_ptr; -} MMIOInterface; - -void mmio_interface_map(MMIOInterface *s); -void mmio_interface_unmap(MMIOInterface *s); - -#endif /* MMIO_INTERFACE_H */ diff --git a/include/hw/s390x/css-bridge.h b/include/hw/s390x/css-bridge.h index cf0860432a..5a0203be5f 100644 --- a/include/hw/s390x/css-bridge.h +++ b/include/hw/s390x/css-bridge.h @@ -28,7 +28,6 @@ typedef struct VirtualCssBridge { /* virtual css bus type */ typedef struct VirtualCssBus { BusState parent_obj; - bool squash_mcss; } VirtualCssBus; #define TYPE_VIRTUAL_CSS_BUS "virtual-css-bus" diff --git a/include/hw/s390x/css.h b/include/hw/s390x/css.h index 35facb47d2..9da5912921 100644 --- a/include/hw/s390x/css.h +++ b/include/hw/s390x/css.h @@ -266,11 +266,8 @@ extern const PropertyInfo css_devid_ro_propinfo; /** * Create a subchannel for the given bus id. * - * If @p bus_id is valid, and @p squash_mcss is true, verify that it is - * not already in use in the default css, and find a free devno from the - * default css image for it. - * If @p bus_id is valid, and @p squash_mcss is false, verify that it is - * not already in use, and find a free devno for it. + * If @p bus_id is valid, verify that it is not already in use, and find a + * free devno for it. * If @p bus_id is not valid find a free subchannel id and device number * across all subchannel sets and all css images starting from the default * css image. @@ -282,7 +279,7 @@ extern const PropertyInfo css_devid_ro_propinfo; * The caller becomes owner of the returned subchannel structure and * is responsible for unregistering and freeing it. */ -SubchDev *css_create_sch(CssDevId bus_id, bool squash_mcss, Error **errp); +SubchDev *css_create_sch(CssDevId bus_id, Error **errp); /** Turn on css migration */ void css_register_vmstate(void); diff --git a/include/hw/s390x/s390-virtio-ccw.h b/include/hw/s390x/s390-virtio-ccw.h index ab88d49d10..e9c4f4182b 100644 --- a/include/hw/s390x/s390-virtio-ccw.h +++ b/include/hw/s390x/s390-virtio-ccw.h @@ -29,7 +29,6 @@ typedef struct S390CcwMachineState { bool aes_key_wrap; bool dea_key_wrap; uint8_t loadparm[8]; - bool s390_squash_mcss; } S390CcwMachineState; typedef struct S390CcwMachineClass { diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h index a9036929b2..15ea6c26fd 100644 --- a/include/hw/vfio/vfio-common.h +++ b/include/hw/vfio/vfio-common.h @@ -112,6 +112,7 @@ typedef struct VFIODevice { bool reset_works; bool needs_reset; bool no_mmap; + bool balloon_allowed; VFIODeviceOps *ops; unsigned int num_irqs; unsigned int num_regions; @@ -131,6 +132,7 @@ typedef struct VFIOGroup { QLIST_HEAD(, VFIODevice) device_list; QLIST_ENTRY(VFIOGroup) next; QLIST_ENTRY(VFIOGroup) container_next; + bool balloon_allowed; } VFIOGroup; typedef struct VFIODMABuf { diff --git a/include/hw/virtio/virtio-gpu.h b/include/hw/virtio/virtio-gpu.h index 9780f755ef..d0321672f4 100644 --- a/include/hw/virtio/virtio-gpu.h +++ b/include/hw/virtio/virtio-gpu.h @@ -125,6 +125,7 @@ typedef struct VirtIOGPU { uint32_t bytes_3d; } stats; + void (*disable_scanout)(struct VirtIOGPU *g, int scanout_id); Error *migration_blocker; } VirtIOGPU; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h new file mode 100644 index 0000000000..ab8b5987a1 --- /dev/null +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -0,0 +1,59 @@ +/* + * ARM CMSDK APB watchdog emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * This is a model of the "APB watchdog" which is part of the Cortex-M + * System Design Kit (CMSDK) and documented in the Cortex-M System + * Design Kit Technical Reference Manual (ARM DDI0479C): + * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit + * + * QEMU interface: + * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: watchdog interrupt + * + * In real hardware the watchdog's reset output is just a GPIO line + * which can then be masked by the board or treated as a simple interrupt. + * (For instance the IoTKit does this with the non-secure watchdog, so that + * secure code can control whether non-secure code can perform a system + * reset via its watchdog.) In QEMU, we just wire up the watchdog reset + * to watchdog_perform_action(), at least for the moment. + */ + +#ifndef CMSDK_APB_WATCHDOG_H +#define CMSDK_APB_WATCHDOG_H + +#include "hw/sysbus.h" +#include "hw/ptimer.h" + +#define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" +#define CMSDK_APB_WATCHDOG(obj) OBJECT_CHECK(CMSDKAPBWatchdog, (obj), \ + TYPE_CMSDK_APB_WATCHDOG) + +typedef struct CMSDKAPBWatchdog { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + qemu_irq wdogint; + uint32_t wdogclk_frq; + struct ptimer_state *timer; + + uint32_t control; + uint32_t intstatus; + uint32_t lock; + uint32_t itcr; + uint32_t itop; + uint32_t resetstatus; +} CMSDKAPBWatchdog; + +#endif diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index 42b946ce90..2b501d0466 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -923,6 +923,9 @@ extern const VMStateInfo vmstate_info_qtailq; #define VMSTATE_UINT16_ARRAY(_f, _s, _n) \ VMSTATE_UINT16_ARRAY_V(_f, _s, _n, 0) +#define VMSTATE_UINT16_SUB_ARRAY(_f, _s, _start, _num) \ + VMSTATE_SUB_ARRAY(_f, _s, _start, _num, 0, vmstate_info_uint16, uint16_t) + #define VMSTATE_UINT16_2DARRAY(_f, _s, _n1, _n2) \ VMSTATE_UINT16_2DARRAY_V(_f, _s, _n1, _n2, 0) diff --git a/include/qapi/qmp/qjson.h b/include/qapi/qmp/qjson.h index 43b2ce2f33..5ebbe5a118 100644 --- a/include/qapi/qmp/qjson.h +++ b/include/qapi/qmp/qjson.h @@ -15,11 +15,15 @@ #define QJSON_H QObject *qobject_from_json(const char *string, Error **errp); -QObject *qobject_from_jsonf(const char *string, ...) GCC_FMT_ATTR(1, 2); -QObject *qobject_from_jsonv(const char *string, va_list *ap, Error **errp) - GCC_FMT_ATTR(1, 0); -QDict *qdict_from_jsonf_nofail(const char *string, ...) GCC_FMT_ATTR(1, 2); +QObject *qobject_from_vjsonf_nofail(const char *string, va_list ap) + GCC_FMT_ATTR(1, 0); +QObject *qobject_from_jsonf_nofail(const char *string, ...) + GCC_FMT_ATTR(1, 2); +QDict *qdict_from_vjsonf_nofail(const char *string, va_list ap) + GCC_FMT_ATTR(1, 0); +QDict *qdict_from_jsonf_nofail(const char *string, ...) + GCC_FMT_ATTR(1, 2); QString *qobject_to_json(const QObject *obj); QString *qobject_to_json_pretty(const QObject *obj); diff --git a/include/qom/cpu.h b/include/qom/cpu.h index bd796579ee..ecf6ed556a 100644 --- a/include/qom/cpu.h +++ b/include/qom/cpu.h @@ -386,6 +386,12 @@ struct CPUState { */ uintptr_t mem_io_pc; vaddr mem_io_vaddr; + /* + * This is only needed for the legacy cpu_unassigned_access() hook; + * when all targets using it have been converted to use + * cpu_transaction_failed() instead it can be removed. + */ + MMUAccessType mem_io_access_type; int kvm_fd; struct KVMState *kvm_state; diff --git a/include/standard-headers/asm-x86/kvm_para.h b/include/standard-headers/asm-x86/kvm_para.h index 1617c84b0d..35cd8d651f 100644 --- a/include/standard-headers/asm-x86/kvm_para.h +++ b/include/standard-headers/asm-x86/kvm_para.h @@ -28,6 +28,7 @@ #define KVM_FEATURE_PV_UNHALT 7 #define KVM_FEATURE_PV_TLB_FLUSH 9 #define KVM_FEATURE_ASYNC_PF_VMEXIT 10 +#define KVM_FEATURE_PV_SEND_IPI 11 #define KVM_HINTS_REALTIME 0 diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h index 11912fde24..b53f8d7c8c 100644 --- a/include/standard-headers/drm/drm_fourcc.h +++ b/include/standard-headers/drm/drm_fourcc.h @@ -182,6 +182,7 @@ extern "C" { #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05 #define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06 #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07 +#define DRM_FORMAT_MOD_VENDOR_ARM 0x08 /* add more to the end as needed */ #define DRM_FORMAT_RESERVED ((1ULL << 56) - 1) @@ -297,6 +298,19 @@ extern "C" { */ #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1) +/* + * Qualcomm Compressed Format + * + * Refers to a compressed variant of the base format that is compressed. + * Implementation may be platform and base-format specific. + * + * Each macrotile consists of m x n (mostly 4 x 4) tiles. + * Pixel data pitch/stride is aligned with macrotile width. + * Pixel data height is aligned with macrotile height. + * Entire pixel data buffer is aligned with 4k(bytes). + */ +#define DRM_FORMAT_MOD_QCOM_COMPRESSED fourcc_mod_code(QCOM, 1) + /* Vivante framebuffer modifiers */ /* @@ -384,6 +398,23 @@ extern "C" { fourcc_mod_code(NVIDIA, 0x15) /* + * Some Broadcom modifiers take parameters, for example the number of + * vertical lines in the image. Reserve the lower 32 bits for modifier + * type, and the next 24 bits for parameters. Top 8 bits are the + * vendor code. + */ +#define __fourcc_mod_broadcom_param_shift 8 +#define __fourcc_mod_broadcom_param_bits 48 +#define fourcc_mod_broadcom_code(val, params) \ + fourcc_mod_code(BROADCOM, ((((uint64_t)params) << __fourcc_mod_broadcom_param_shift) | val)) +#define fourcc_mod_broadcom_param(m) \ + ((int)(((m) >> __fourcc_mod_broadcom_param_shift) & \ + ((1ULL << __fourcc_mod_broadcom_param_bits) - 1))) +#define fourcc_mod_broadcom_mod(m) \ + ((m) & ~(((1ULL << __fourcc_mod_broadcom_param_bits) - 1) << \ + __fourcc_mod_broadcom_param_shift)) + +/* * Broadcom VC4 "T" format * * This is the primary layout that the V3D GPU can texture from (it @@ -404,6 +435,151 @@ extern "C" { */ #define DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED fourcc_mod_code(BROADCOM, 1) +/* + * Broadcom SAND format + * + * This is the native format that the H.264 codec block uses. For VC4 + * HVS, it is only valid for H.264 (NV12/21) and RGBA modes. + * + * The image can be considered to be split into columns, and the + * columns are placed consecutively into memory. The width of those + * columns can be either 32, 64, 128, or 256 pixels, but in practice + * only 128 pixel columns are used. + * + * The pitch between the start of each column is set to optimally + * switch between SDRAM banks. This is passed as the number of lines + * of column width in the modifier (we can't use the stride value due + * to various core checks that look at it , so you should set the + * stride to width*cpp). + * + * Note that the column height for this format modifier is the same + * for all of the planes, assuming that each column contains both Y + * and UV. Some SAND-using hardware stores UV in a separate tiled + * image from Y to reduce the column height, which is not supported + * with these modifiers. + */ + +#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(2, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(3, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(4, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(5, v) + +#define DRM_FORMAT_MOD_BROADCOM_SAND32 \ + DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND64 \ + DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND128 \ + DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND256 \ + DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(0) + +/* Broadcom UIF format + * + * This is the common format for the current Broadcom multimedia + * blocks, including V3D 3.x and newer, newer video codecs, and + * displays. + * + * The image consists of utiles (64b blocks), UIF blocks (2x2 utiles), + * and macroblocks (4x4 UIF blocks). Those 4x4 UIF block groups are + * stored in columns, with padding between the columns to ensure that + * moving from one column to the next doesn't hit the same SDRAM page + * bank. + * + * To calculate the padding, it is assumed that each hardware block + * and the software driving it knows the platform's SDRAM page size, + * number of banks, and XOR address, and that it's identical between + * all blocks using the format. This tiling modifier will use XOR as + * necessary to reduce the padding. If a hardware block can't do XOR, + * the assumption is that a no-XOR tiling modifier will be created. + */ +#define DRM_FORMAT_MOD_BROADCOM_UIF fourcc_mod_code(BROADCOM, 6) + +/* + * Arm Framebuffer Compression (AFBC) modifiers + * + * AFBC is a proprietary lossless image compression protocol and format. + * It provides fine-grained random access and minimizes the amount of data + * transferred between IP blocks. + * + * AFBC has several features which may be supported and/or used, which are + * represented using bits in the modifier. Not all combinations are valid, + * and different devices or use-cases may support different combinations. + */ +#define DRM_FORMAT_MOD_ARM_AFBC(__afbc_mode) fourcc_mod_code(ARM, __afbc_mode) + +/* + * AFBC superblock size + * + * Indicates the superblock size(s) used for the AFBC buffer. The buffer + * size (in pixels) must be aligned to a multiple of the superblock size. + * Four lowest significant bits(LSBs) are reserved for block size. + */ +#define AFBC_FORMAT_MOD_BLOCK_SIZE_MASK 0xf +#define AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 (1ULL) +#define AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 (2ULL) + +/* + * AFBC lossless colorspace transform + * + * Indicates that the buffer makes use of the AFBC lossless colorspace + * transform. + */ +#define AFBC_FORMAT_MOD_YTR (1ULL << 4) + +/* + * AFBC block-split + * + * Indicates that the payload of each superblock is split. The second + * half of the payload is positioned at a predefined offset from the start + * of the superblock payload. + */ +#define AFBC_FORMAT_MOD_SPLIT (1ULL << 5) + +/* + * AFBC sparse layout + * + * This flag indicates that the payload of each superblock must be stored at a + * predefined position relative to the other superblocks in the same AFBC + * buffer. This order is the same order used by the header buffer. In this mode + * each superblock is given the same amount of space as an uncompressed + * superblock of the particular format would require, rounding up to the next + * multiple of 128 bytes in size. + */ +#define AFBC_FORMAT_MOD_SPARSE (1ULL << 6) + +/* + * AFBC copy-block restrict + * + * Buffers with this flag must obey the copy-block restriction. The restriction + * is such that there are no copy-blocks referring across the border of 8x8 + * blocks. For the subsampled data the 8x8 limitation is also subsampled. + */ +#define AFBC_FORMAT_MOD_CBR (1ULL << 7) + +/* + * AFBC tiled layout + * + * The tiled layout groups superblocks in 8x8 or 4x4 tiles, where all + * superblocks inside a tile are stored together in memory. 8x8 tiles are used + * for pixel formats up to and including 32 bpp while 4x4 tiles are used for + * larger bpp formats. The order between the tiles is scan line. + * When the tiled layout is used, the buffer size (in pixels) must be aligned + * to the tile size. + */ +#define AFBC_FORMAT_MOD_TILED (1ULL << 8) + +/* + * AFBC solid color blocks + * + * Indicates that the buffer makes use of solid-color blocks, whereby bandwidth + * can be reduced if a whole superblock is a single color. + */ +#define AFBC_FORMAT_MOD_SC (1ULL << 9) + #if defined(__cplusplus) } #endif diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index eb10c075e4..57ffcb5341 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -226,7 +226,7 @@ enum tunable_id { ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ /* - * Add your fresh new tubale attribute above and remember to update + * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/core/ethtool.c */ __ETHTOOL_TUNABLE_COUNT, @@ -870,7 +870,8 @@ struct ethtool_flow_ext { * includes the %FLOW_EXT or %FLOW_MAC_EXT flag * (see &struct ethtool_flow_ext description). * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC - * if packets should be discarded + * if packets should be discarded, or %RX_CLS_FLOW_WAKE if the + * packets should be used for Wake-on-LAN with %WAKE_FILTER * @location: Location of rule in the table. Locations must be * numbered such that a flow matching multiple rules will be * classified according to the first (lowest numbered) rule. @@ -902,13 +903,13 @@ struct ethtool_rx_flow_spec { static inline uint64_t ethtool_get_flow_spec_ring(uint64_t ring_cookie) { return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie; -}; +} static inline uint64_t ethtool_get_flow_spec_ring_vf(uint64_t ring_cookie) { return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF; -}; +} /** * struct ethtool_rxnfc - command to get or set RX flow classification rules @@ -1634,6 +1635,7 @@ static inline int ethtool_validate_duplex(uint8_t duplex) #define WAKE_ARP (1 << 4) #define WAKE_MAGIC (1 << 5) #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ +#define WAKE_FILTER (1 << 7) /* L2-L4 network traffic flow types */ #define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ @@ -1671,6 +1673,7 @@ static inline int ethtool_validate_duplex(uint8_t duplex) #define RXH_DISCARD (1 << 31) #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL +#define RX_CLS_FLOW_WAKE 0xfffffffffffffffeULL /* Special RX classification rule insert location values */ #define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index 4da87e2ef8..ee556ccc93 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -636,6 +636,7 @@ #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ @@ -960,8 +961,9 @@ #define PCI_REBAR_CTRL 8 /* control register */ #define PCI_REBAR_CTRL_BAR_IDX 0x00000007 /* BAR index */ #define PCI_REBAR_CTRL_NBAR_MASK 0x000000E0 /* # of resizable BARs */ -#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # of BARs */ +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # of BARs */ #define PCI_REBAR_CTRL_BAR_SIZE 0x00001F00 /* BAR size */ +#define PCI_REBAR_CTRL_BAR_SHIFT 8 /* shift for BAR size */ /* Dynamic Power Allocation */ #define PCI_DPA_CAP 4 /* capability register */ diff --git a/include/standard-headers/linux/virtio_config.h b/include/standard-headers/linux/virtio_config.h index b777069699..0b194365a0 100644 --- a/include/standard-headers/linux/virtio_config.h +++ b/include/standard-headers/linux/virtio_config.h @@ -45,11 +45,14 @@ /* We've given up on this device. */ #define VIRTIO_CONFIG_S_FAILED 0x80 -/* Some virtio feature bits (currently bits 28 through 32) are reserved for the - * transport being used (eg. virtio_ring), the rest are per-device feature - * bits. */ +/* + * Virtio feature bits VIRTIO_TRANSPORT_F_START through + * VIRTIO_TRANSPORT_F_END are reserved for the transport + * being used (e.g. virtio_ring, virtio_pci etc.), the + * rest are per-device feature bits. + */ #define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 34 +#define VIRTIO_TRANSPORT_F_END 38 #ifndef VIRTIO_CONFIG_NO_LEGACY /* Do we get callbacks when the ring is completely used, even if we've @@ -71,4 +74,9 @@ * this is for compatibility with legacy systems. */ #define VIRTIO_F_IOMMU_PLATFORM 33 + +/* + * Does the device support Single Root I/O Virtualization? + */ +#define VIRTIO_F_SR_IOV 37 #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/sysemu/blockdev.h b/include/sysemu/blockdev.h index ac22f2ae1f..24954b94e0 100644 --- a/include/sysemu/blockdev.h +++ b/include/sysemu/blockdev.h @@ -28,16 +28,13 @@ typedef enum { } BlockInterfaceType; struct DriveInfo { - const char *devaddr; BlockInterfaceType type; int bus; int unit; int auto_del; /* see blockdev_mark_auto_del() */ bool is_default; /* Added by default_drive() ? */ int media_cd; - int cyls, heads, secs, trans; QemuOpts *opts; - char *serial; QTAILQ_ENTRY(DriveInfo) next; }; diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index 76ef6196a7..8d6095d98b 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -182,7 +182,7 @@ void hmp_info_usb(Monitor *mon, const QDict *qdict); void add_boot_device_path(int32_t bootindex, DeviceState *dev, const char *suffix); -char *get_boot_devices_list(size_t *size, bool ignore_suffixes); +char *get_boot_devices_list(size_t *size); DeviceState *get_boot_device(uint32_t position); void check_boot_index(int32_t bootindex, Error **errp); |