diff options
Diffstat (limited to 'qemu-options.hx')
| -rw-r--r-- | qemu-options.hx | 153 |
1 files changed, 151 insertions, 2 deletions
diff --git a/qemu-options.hx b/qemu-options.hx index 1f862b19a6..a3c066c678 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2796,6 +2796,26 @@ DEFHEADING() DEFHEADING(Network options:) DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, +#ifdef CONFIG_PASST + "-netdev passt,id=str[,path=file][,quiet=on|off][,vhost-user=on|off]\n" + "[,mtu=mtu][,address=addr][,netmask=mask][,mac=addr][,gateway=addr]\n" + " [,interface=name][,outbound=address][,outbound-if4=name]\n" + " [,outbound-if6=name][,dns=addr][,search=list][,fqdn=name]\n" + " [,dhcp-dns=on|off][,dhcp-search=on|off][,map-host-loopback=addr]\n" + " [,map-guest-addr=addr][,dns-forward=addr][,dns-host=addr]\n" + " [,tcp=on|off][,udp=on|off][,icmp=on|off][,dhcp=on|off]\n" + " [,ndp=on|off][,dhcpv6=on|off][,ra=on|off][,freebind=on|off]\n" + " [,ipv4=on|off][,ipv6=on|off][,tcp-ports=spec][,udp-ports=spec]\n" + " [,param=list]\n" + " configure a passt network backend with ID 'str'\n" + " if 'path' is not provided 'passt' will be started according to PATH\n" + " by default, informational message of passt are not displayed (quiet=on)\n" + " to display this message, use 'quiet=off'\n" + " by default, passt will be started in socket-based mode, to enable vhost-mode,\n" + " use 'vhost-user=on'\n" + " for details on other options, refer to passt(1)\n" + " 'param' allows to pass any option defined by passt(1)\n" +#endif #ifdef CONFIG_SLIRP "-netdev user,id=str[,ipv4=on|off][,net=addr[/mask]][,host=addr]\n" " [,ipv6=on|off][,ipv6-net=addr[/int]][,ipv6-host=addr]\n" @@ -2952,6 +2972,9 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, " configure a hub port on the hub with ID 'n'\n", QEMU_ARCH_ALL) DEF("nic", HAS_ARG, QEMU_OPTION_nic, "-nic [tap|bridge|" +#ifdef CONFIG_PASST + "passt|" +#endif #ifdef CONFIG_SLIRP "user|" #endif @@ -2984,6 +3007,9 @@ DEF("net", HAS_ARG, QEMU_OPTION_net, " configure or create an on-board (or machine default) NIC and\n" " connect it to hub 0 (please use -nic unless you need a hub)\n" "-net [" +#ifdef CONFIG_PASST + "passt|" +#endif #ifdef CONFIG_SLIRP "user|" #endif @@ -3005,7 +3031,7 @@ DEF("net", HAS_ARG, QEMU_OPTION_net, " old way to initialize a host network interface\n" " (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL) SRST -``-nic [tap|bridge|user|l2tpv3|vde|netmap|af-xdp|vhost-user|socket][,...][,mac=macaddr][,model=mn]`` +``-nic [tap|passt|bridge|user|l2tpv3|vde|netmap|af-xdp|vhost-user|socket][,...][,mac=macaddr][,model=mn]`` This option is a shortcut for configuring both the on-board (default) guest NIC hardware and the host network backend in one go. The host backend options are the same as with the corresponding @@ -3027,6 +3053,129 @@ SRST network backend) which is activated if no other networking options are provided. +``-netdev passt,id=str[,option][,...]`` + Configure a passt network backend which requires no administrator + privilege to run. Valid options are: + + ``id=id`` + Assign symbolic name for use in monitor commands. + + ``path=file`` + Filename of the passt program to run. If it is not provided, + passt command will be started with the help of the PATH environment + variable. + + ``quiet=on|off`` + By default, ``quiet=on`` to disable informational message from + passt. ``quiet=on`` is passed as ``--quiet`` to passt. + + ``vhost-user=on|off`` + By default, ``vhost-user=off`` and QEMU uses the stream network + backend to communicate with passt. If ``vhost-user=on``, passt is + started with ``--vhost-user`` and QEMU uses the vhost-user network + backend to communicate with passt. + + ``@mtu`` + Assign MTU via DHCP/NDP + + ``address`` + IPv4 or IPv6 address + + ``netmask`` + IPv4 mask + + ``mac`` + source MAC address + + ``gateway`` + IPv4 or IPv6 address as gateway + + ``interface`` + Interface for addresses and routes + + ``outbound`` + Bind to address as outbound source + + ``outbound-if4`` + Bind to outbound interface for IPv4 + + ``outbound-if6`` + Bind to outbound interface for IPv6 + + ``dns`` + IPv4 or IPv6 address as DNS + + ``search`` + Search domains + + ``fqdn`` + FQDN to configure client with + + ``dhcp-dns`` + Enable/disable DNS list in DHCP/DHCPv6/NDP + + ``dhcp-search`` + Enable/disable list in DHCP/DHCPv6/NDP + + ``map-host-loopback`` + Addresse to refer to host + + ``map-guest-addr`` + Addr to translate to guest's address + + ``dns-forward`` + Forward DNS queries sent to + + ``dns-host`` + Host nameserver to direct queries to + + ``tcp`` + Enable/disable TCP + + ``udp`` + Enable/disable UDP + + ``icmp`` + Enable/disable ICMP + + ``dhcp`` + Enable/disable DHCP + + ``ndp`` + Enable/disable NDP + + ``dhcpv6`` + Enable/disable DHCPv6 + + ``ra`` + Enable/disable route advertisements + + ``freebind`` + Bind to any address for forwarding + + ``ipv4`` + Enable/disable IPv4 + + ``ipv6`` + Enable/disable IPv6 + + ``tcp-ports`` + TCP ports to forward + + ``udp-ports`` + UDP ports to forward + + ``param=string`` + ``string`` will be passed to passt has a command line parameter, + we can have multiple occurences of the ``param`` parameter to + pass multiple parameters to passt. + + For instance, to pass ``--trace --log=trace.log``: + + .. parsed-literal:: + + |qemu_system| -nic passt,param=--trace,param=--log=trace.log + ``-netdev user,id=id[,option][,option][,...]`` Configure user mode host network backend which requires no administrator privilege to run. Valid options are: @@ -3711,7 +3860,7 @@ SRST Use ``-net nic,model=help`` for a list of available devices for your target. -``-net user|tap|bridge|socket|l2tpv3|vde[,...][,name=name]`` +``-net user|passt|tap|bridge|socket|l2tpv3|vde[,...][,name=name]`` Configure a host network backend (with the options corresponding to the same ``-netdev`` option) and connect it to the emulated hub 0 (the default hub). Use name to specify the name of the hub port. |