summary refs log tree commit diff stats
path: root/accel/tcg/cpu-exec.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
* accel/tcg: Complete cpu initialization before registrationRichard Henderson2022-11-011-3/+5
| | | | | | | | | | | | | | | Delay cpu_list_add until realize is complete, so that cross-cpu interaction does not happen with incomplete cpu state. For this, we must delay plugin initialization out of tcg_exec_realizefn, because no cpu_index has been assigned. Fixes a problem with cross-cpu jump cache flushing, when the jump cache has not yet been allocated. Fixes: a976a99a2975 ("include/hw/core: Create struct CPUJumpCache") Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Introduce tb_{set_}page_addr{0,1}Richard Henderson2022-10-261-4/+5
| | | | | | | This data structure will be replaced for user-only: add accessors. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Add a quicker check for breakpointsLeandro Lupori2022-10-261-6/+9
| | | | | | | | | | | | | | | | | | | | | Profiling QEMU during Fedora 35 for PPC64 boot revealed that a considerable amount of time was being spent in check_for_breakpoints() (0.61% of total time on PPC64 and 2.19% on amd64), even though it was just checking that its queue was empty and returning, when no breakpoints were set. It turns out this function is not inlined by the compiler and it's always called by helper_lookup_tb_ptr(), one of the most called functions. By leaving only the check for empty queue in check_for_breakpoints() and moving the remaining code to check_for_breakpoints_slow(), called only when the queue is not empty, it's possible to avoid the call overhead. An improvement of about 3% in total time was measured on POWER9. Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221025202424.195984-2-leandro.lupori@eldorado.org.br> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Introduce TARGET_TB_PCRELRichard Henderson2022-10-041-6/+10
| | | | | | | | Prepare for targets to be able to produce TBs that can run in more than one virtual context. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Introduce tb_pc and log_pcRichard Henderson2022-10-041-21/+25
| | | | | | | | | | | The availability of tb->pc will shortly be conditional. Introduce accessor functions to minimize ifdefs. Pass around a known pc to places like tcg_gen_code, where the caller must already have the value. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* include/hw/core: Create struct CPUJumpCacheRichard Henderson2022-10-041-3/+7
| | | | | | | | Wrap the bare TranslationBlock pointer into a structure. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Do not align tb->page_addr[0]Richard Henderson2022-10-041-8/+8
| | | | | | | | | | | Let tb->page_addr[0] contain the address of the first byte of the translated block, rather than the address of the page containing the start of the translated block. We need to recover this value anyway at various points, and it is easier to discard a page offset when it is not needed, which happens naturally via the existing find_page shift. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Document the faulting lookup in tb_lookup_cmpRichard Henderson2022-09-061-1/+10
| | | | | | | | | It was non-obvious to me why we can raise an exception in the middle of a comparison function, but it works. While nearby, use TARGET_PAGE_ALIGN instead of open-coding. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Make tb_htable_lookup staticRichard Henderson2022-09-061-61/+61
| | | | | | | | | | The function is not used outside of cpu-exec.c. Move it and its subroutines up in the file, before the first use. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Unlock mmap_lock after longjmpRichard Henderson2022-09-061-6/+6
| | | | | | | | | | | | The mmap_lock is held around tb_gen_code. While the comment is correct that the lock is dropped when tb_gen_code runs out of memory, the lock is *not* dropped when an exception is raised reading code for translation. Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Inline dump_opcount_info() and remove itBernhard Beschow2022-06-111-1/+1
| | | | | | | | | | | dump_opcount_info() is a one-line wrapper around tcg_dump_op_count() which is also exported. So use the latter directly. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220520180109.8224-10-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* accel/tcg/cpu-exec: Unexport dump_drift_info()Bernhard Beschow2022-06-111-1/+1
| | | | | | | | | | | | | Commit 3a841ab53f165910224dc4bebabf1a8f1d04200c 'qapi: introduce x-query-jit QMP command' basically moved the only function using dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't need to be exported any longer. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220520180109.8224-9-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* accel/tcg: Use cpu_dump_state between qemu_log_trylock/unlockRichard Henderson2022-04-201-1/+1
| | | | | | | | | Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need not be done if we have already performed the lock beforehand. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>
* *: Use fprintf between qemu_log_trylock/unlockRichard Henderson2022-04-201-7/+9
| | | | | | | | | | | | | Inside qemu_log, we perform qemu_log_trylock/unlock, which need not be done if we have already performed the lock beforehand. Always check the result of qemu_log_trylock -- only checking qemu_loglevel_mask races with the acquisition of the lock on the logfile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
* util/log: Rename qemu_log_lock to qemu_log_trylockRichard Henderson2022-04-201-1/+1
| | | | | | | | | | | | | | This function can fail, which makes it more like ftrylockfile or pthread_mutex_trylock than flockfile or pthread_mutex_lock, so rename it. To closer match the other trylock functions, release rcu_read_lock along the failure path, so that qemu_log_unlock need not be called on failure. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
* Remove qemu-common.h include from most unitsMarc-André Lureau2022-04-061-1/+0
| | | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* accel/tcg: Remove pointless CPUArchState castsPhilippe Mathieu-Daudé2022-03-061-2/+2
| | | | | | Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220305233415.64627-2-philippe.mathieu.daude@gmail.com>
* accel/tcg/cpu-exec: Fix precise single-stepping after interruptLuc Michel2022-02-281-2/+6
| | | | | | | | | | | | | | In some cases, cpu->exit_request can be false after handling the interrupt, leading to another TB being executed instead of returning to the main loop. Fix this by returning true unconditionally when in single-step mode. Fixes: ba3c35d9c402 ("tcg/cpu-exec: precise single-stepping after an interrupt") Signed-off-by: Luc Michel <lmichel@kalray.eu> Message-Id: <20220214132656.11397-1-lmichel@kalray.eu> [rth: Unlock iothread mutex; simplify indentation] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* replay: use CF_NOIRQ for special exception-replaying TBPavel Dovgalyuk2022-02-091-1/+2
| | | | | | | | | | | | Commit aff0e204cb1f1c036a496c94c15f5dfafcd9b4b4 introduced CF_NOIRQ usage, but one case was forgotten. Record/replay uses one special TB which is not really executed, but used to cause a correct exception in replay mode. This patch adds CF_NOIRQ flag for such block. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <164362834054.1754532.7678416881159817273.stgit@pasha-ThinkPad-X280> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* monitor: move x-query-profile into accel/tcg to fix buildAlex Bennée2022-01-181-0/+31
| | | | | | | | | | | | | | | | As --enable-profiler isn't defended in CI we missed this breakage. Move the qmp handler into accel/tcg so we have access to the helpers we need. While we are at it ensure we gate the feature on CONFIG_TCG. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Fixes: 37087fde0e ("qapi: introduce x-query-profile QMP command") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/773 Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220105135009.1584676-23-alex.bennee@linaro.org>
* accel/tcg: suppress IRQ check for special TBsAlex Bennée2021-11-291-0/+9
| | | | | | | | | | | | | | | | | | When we set cpu->cflags_next_tb it is because we want to carefully control the execution of the next TB. Currently there is a race that causes the second stage of watchpoint handling to get ignored if an IRQ is processed before we finish executing the instruction that triggers the watchpoint. Use the new CF_NOIRQ facility to avoid the race. We also suppress IRQs when handling precise self modifying code to avoid unnecessary bouncing. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Fixes: https://gitlab.com/qemu-project/qemu/-/issues/245 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211129140932.4115115-3-alex.bennee@linaro.org>
* Merge remote-tracking branch ↵Richard Henderson2021-11-031-9/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/berrange/tags/hmp-x-qmp-620-pull-request' into staging Initial conversion of HMP debugging commands to QMP This introduces a new policy that all HMP commands will be converted to have QMP equivalents, marked unstable if no formal QAPI modelling is intended to be done. New unstable commands are added as follows: - HMP "info roms" => QMP "x-query-roms" - HMP "info profile" => QMP "x-query-profile" - HMP "info numa" => QMP "x-query-numa" - HMP "info usb" => QMP "x-query-usb" - HMP "info rdma" => QMP "x-query-rdma" - HMP "info ramblock" => QMP "x-query-ramblock" - HMP "info irq" => QMP "x-query-irq" - HMP "info jit" => QMP "x-query-jit" - HMP "info opcount" => QMP "x-query-opcount" # gpg: Signature made Tue 02 Nov 2021 01:54:28 PM EDT # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] * remotes/berrange/tags/hmp-x-qmp-620-pull-request: qapi: introduce x-query-opcount QMP command qapi: introduce x-query-jit QMP command qapi: introduce x-query-irq QMP command qapi: introduce x-query-ramblock QMP command qapi: introduce x-query-rdma QMP command qapi: introduce x-query-usb QMP command qapi: introduce x-query-numa QMP command qapi: introduce x-query-profile QMP command qapi: introduce x-query-roms QMP command docs/devel: document expectations for HMP commands in the future docs/devel: add example of command returning unstructured text docs/devel: document expectations for QAPI data modelling for QMP monitor: introduce HumanReadableText and HMP support docs/devel: update error handling guidance for HMP commands docs/devel: tweak headings in monitor command docs docs/devel: rename file for writing monitor commands monitor: make hmp_handle_error return a boolean monitor: remove 'info ioapic' HMP command Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
| * qapi: introduce x-query-opcount QMP commandDaniel P. Berrangé2021-11-021-0/+14
| | | | | | | | | | | | | | | | | | | | | | This is a counterpart to the HMP "info opcount" command. It is being added with an "x-" prefix because this QMP command is intended as an ad hoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
| * qapi: introduce x-query-jit QMP commandDaniel P. Berrangé2021-11-021-9/+28
| | | | | | | | | | | | | | | | | | | | | | This is a counterpart to the HMP "info jit" command. It is being added with an "x-" prefix because this QMP command is intended as an ad hoc debugging tool and will thus not be modelled in QAPI as fully structured data, nor will it have long term guaranteed stability. The existing HMP command is rewritten to call the QMP command. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* | accel/tcg: Move clear_helper_retaddr to cpu loopRichard Henderson2021-10-301-1/+2
|/ | | | | | | | Currently there are only two places that require we reset this value before exiting to the main loop, but that will change. Reviewed-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Handle gdb singlestep in cpu_tb_execRichard Henderson2021-10-151-0/+11
| | | | | | | Currently the change in cpu_tb_exec is masked by the debug exception being raised by the translators. But this allows us to remove that code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Restrict cpu_handle_halt() to sysemuPhilippe Mathieu-Daudé2021-09-211-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Commit 372579427a5 ("tcg: enable thread-per-vCPU") added the following comment describing EXCP_HALTED in qemu_tcg_cpu_thread_fn(): case EXCP_HALTED: /* during start-up the vCPU is reset and the thread is * kicked several times. If we don't ensure we go back * to sleep in the halted state we won't cleanly * start-up when the vCPU is enabled. * * cpu->halted should ensure we sleep in wait_io_event */ g_assert(cpu->halted); break; qemu_wait_io_event() is sysemu-specific, so we can restrict the cpu_handle_halt() call in cpu_exec() to system emulation. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210912172731.789788-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Restrict TCGCPUOps::cpu_exec_interrupt() to sysemuPhilippe Mathieu-Daudé2021-09-141-3/+7
| | | | | | | | | | | | | All targets call TCGCPUOps::cpu_exec_interrupt() from sysemu code. Move its declaration to restrict it to system emulation. Extend the code guarded. Restrict the static inlined need_replay_interrupt() method to avoid a "defined but not used" warning. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-24-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Rename user-mode do_interrupt hack as fake_user_interruptPhilippe Mathieu-Daudé2021-09-141-2/+2
| | | | | | | | | | | | | | | | do_interrupt() is sysemu specific. However due to some X86 specific hack, it is also used in user-mode emulation, which is why it couldn't be restricted to CONFIG_SOFTMMU (see the comment around added in commit 78271684719: "cpu: tcg_ops: move to tcg-cpu-ops.h, keep a pointer in CPUClass"). Keep the hack but rename the handler as fake_user_interrupt() and restrict do_interrupt() to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-6-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Remove unused variable in cpu_execRichard Henderson2021-07-261-8/+2
| | | | | | | | | From clang-13: accel/tcg/cpu-exec.c:783:15: error: variable 'cc' set but not used \ [-Werror,-Wunused-but-set-variable] Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Remove unnecessary check on icount_extra in cpu_loop_exec_tb()Peter Maydell2021-07-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | In cpu_loop_exec_tb(), we decide whether to look for a TB with exactly insns_left instructions in it using the condition (!cpu->icount_extra && insns_left > 0 && insns_left < tb->icount) The check for icount_extra == 0 is unnecessary, because we just set insns_left = MIN(0xffff, cpu->icount_budget); icount_extra = icount_budget - insns_left; and so icount_extra can only be non-zero if icount_budget > 0xffff and insns_left == 0xffff. But in that case insns_left >= tb->icount because 0xffff is much larger than TCG_MAX_INSNS, so the condition will be false anyway. Remove the unnecessary check, and instead assert: * that we are only going to execute a partial TB here if the icount budget has run out (ie icount_extra == 0) * that the number of insns we're going to execute does fit into the CF_COUNT_MASK Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210725174405.24568-3-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Don't use CF_COUNT_MASK as the max value of icount_decr.u16.lowPeter Maydell2021-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | In cpu_loop_exec_tb() we were bounding the number of insns we might try to execute in a TB using CF_COUNT_MASK. This is incorrect, because we can validly put up to 0xffff into icount_decr.u16.low. In particular, since commit 78ff82bb1b67c0d7 reduced CF_COUNT_MASK to 511 this meant that we would incorrectly only try to execute 511 instructions in a 512-instruction TB, which could result in QEMU hanging when in icount mode. Use the actual maximum value, which is 0xffff. (This brings this code in to line with the similar logic in icount_prepare_for_run() in tcg-accel-ops-icount.c.) Fixes: 78ff82bb1b67c0d7 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/499 Message-Id: <20210725174405.24568-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Record singlestep_enabled in tb->cflagsRichard Henderson2021-07-211-1/+6
| | | | | | | | | | | Set CF_SINGLE_STEP when single-stepping is enabled. This avoids the need to flush all tb's when turning single-stepping on or off. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Move breakpoint recognition outside translationRichard Henderson2021-07-211-3/+88
| | | | | | | | | | | | | | | | | | Trigger breakpoints before beginning translation of a TB that would begin with a BP. Thus we never generate code for the BP at all. Single-step instructions within a page containing a BP so that we are sure to check each insn for the BP as above. We no longer need to flush any TBs when changing BPs. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/286 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/404 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/489 Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Merge tb_find into its only callerRichard Henderson2021-07-211-43/+42
| | | | | | | | | | We are going to want two things: (1) check for breakpoints will want to break out of the loop here, (2) cflags can only be calculated with pc in hand. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Use CF_NO_GOTO_{TB, PTR} in cpu_exec_step_atomicRichard Henderson2021-07-211-3/+8
| | | | | | | | | | | Request that the one TB returns immediately, so that we release the exclusive lock as soon as possible. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210717221851.2124573-7-richard.henderson@linaro.org>
* accel/tcg: Handle -singlestep in curr_cflagsRichard Henderson2021-07-211-1/+7
| | | | | | | | | | Exchange the test in translator_use_goto_tb for CF_NO_GOTO_TB, and the test in tb_gen_code for setting CF_COUNT_MASK to 1. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-6-richard.henderson@linaro.org>
* accel/tcg: Drop CF_NO_GOTO_PTR from -d nochainRichard Henderson2021-07-211-1/+1
| | | | | | | | | | | | The purpose of suppressing goto_ptr from -d nochain had been to return to the main loop so that -d cpu would be recognized. But we now include -d cpu logging in helper_lookup_tb_ptr so there is no need to exclude goto_ptr. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-5-richard.henderson@linaro.org>
* accel/tcg: Add CF_NO_GOTO_TB and CF_NO_GOTO_PTRRichard Henderson2021-07-211-1/+7
| | | | | | | | | | | | | | | Move the -d nochain check to bits on tb->cflags. These will be used for more than -d nochain shortly. Set bits during curr_cflags, test them in translator_use_goto_tb, assert we're not doing anything odd in tcg_gen_goto_tb. The test in tcg_gen_exit_tb is redundant with the assert for goto_tb_issue_mask. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-4-richard.henderson@linaro.org>
* accel/tcg: Move curr_cflags into cpu-exec.cRichard Henderson2021-07-211-0/+5
| | | | | | | | | | | | We will shortly have more than a simple member read here, with stuff not necessarily exposed to exec/exec-all.h. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210717221851.2124573-3-richard.henderson@linaro.org>
* accel/tcg: Log tb->cflags with -d execRichard Henderson2021-07-091-3/+3
| | | | | Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Split out log_cpu_execRichard Henderson2021-07-091-27/+34
| | | | | | | | | | | Split out CPU_LOG_EXEC and CPU_LOG_TB_CPU logging from cpu_tb_exec to a new function. Perform only one pc range check after a combined mask check. Use the new function in lookup_tb_ptr. This enables CPU_LOG_TB_CPU between indirectly chained tbs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Move tb_lookup to cpu-exec.cRichard Henderson2021-07-091-1/+30
| | | | | | | | Now that we've moved helper_lookup_tb_ptr, the only user of tb-lookup.h is cpu-exec.c; merge the contents in. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.cRichard Henderson2021-07-091-0/+30
| | | | | | | | This will allow additional code sharing. No functional change. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Keep TranslationBlock headers local to TCGPhilippe Mathieu-Daudé2021-05-261-3/+3
| | | | | | | | | | Only the TCG accelerator uses the TranslationBlock API. Move the tb-context.h / tb-hash.h / tb-lookup.h from the global namespace to the TCG one (in accel/tcg). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210524170453.3791436-3-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Reduce 'exec/tb-context.h' inclusionPhilippe Mathieu-Daudé2021-05-261-0/+1
| | | | | | | | | | | | | | | | | Only 2 headers require "exec/tb-context.h". Instead of having all files including "exec/exec-all.h" also including it, directly include it where it is required: - accel/tcg/cpu-exec.c - accel/tcg/translate-all.c For plugins/plugin.h, we were implicitly relying on exec/exec-all.h -> exec/tb-context.h -> qemu/qht.h which is now included directly. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210524170453.3791436-2-f4bug@amsat.org> [rth: Fix plugins/plugin.h compilation] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Do not include cpu.h if it's not really necessaryThomas Huth2021-05-021-1/+0
| | | | | | | | Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Merge remote-tracking branch ↵Peter Maydell2021-03-101-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * qtest: delete superfluous inclusions of qtest.hChen Qun2021-03-091-1/+0
| | | | | | | | | | | | | | | | | | | | There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* | accel/tcg: Precompute curr_cflags into cpu->tcg_cflagsRichard Henderson2021-03-061-3/+0
| | | | | | | | | | | | | | | | | | The primary motivation is to remove a dozen insns along the fast-path in tb_lookup. As a byproduct, this allows us to completely remove parallel_cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>