summary refs log tree commit diff stats
path: root/hw/core/generic-loader.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2017-07-18migration/rdma: Safely convert control typesDr. David Alan Gilbert1-22/+32
control_desc[] is an array of strings that correspond to a series of message types; they're used only for error messages, but if the message type is seriously broken then we could go off the end of the array. Convert the array to a function control_desc() that bound checks. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170717110936.23314-6-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18migration/rdma: Allow cancelling while waiting for wridDr. David Alan Gilbert1-6/+53
When waiting for a WRID, if the other side dies we end up waiting for ever with no way to cancel the migration. Cure this by poll()ing the fd first with a timeout and checking error flags and migration state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20170717110936.23314-5-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18migration/rdma: fix qemu_rdma_block_for_wrid error pathsDr. David Alan Gilbert1-2/+6
The two places that 'goto err_block_for_wrid' weren't setting ret and so would end up returning 0 even though we've failed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20170717110936.23314-4-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18migration: Close file on failed migration loadDr. David Alan Gilbert1-0/+1
Closing the file before exit on a failure allows the source to cleanup better, especially with RDMA. Partial fix for https://bugs.launchpad.net/qemu/+bug/1545052 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170717110936.23314-3-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18migration/rdma: Fix race on sourceDr. David Alan Gilbert1-6/+6
Fix a race where the destination might try and send the source a WRID_READY before the source has done a post-recv for it. rdma_post_recv has to happen after the qp exists, and we're OK since we've already called qemu_rdma_source_init that calls qemu_alloc_qp. This corresponds to: https://bugzilla.redhat.com/show_bug.cgi?id=1285044 The race can be triggered by adding a few ms wait before this post_recv_control (which was originally due to me turning on loads of debug). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20170717110936.23314-2-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18test-qga: add test for guest-get-osinfoTomáš Golembiovský3-4/+72
Add test for guest-get-osinfo command. Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If the variable is defined it is interpreted as path to the os-release file and it is parsed instead of the default paths. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> * move declarations to beginning of functions Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-18test-qga: pass environemnt to qemu-gaTomáš Golembiovský1-4/+4
Modify fixture_setup() to pass environemnt variables to spawned qemu-ga instance. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-18qemu-ga: add guest-get-osinfo commandTomáš Golembiovský3-0/+391
Add a new 'guest-get-osinfo' command for reporting basic information of the guest operating system. This includes machine architecture, version and release of the kernel and several fields from os-release file if it is present (as defined in [1]). [1] https://www.freedesktop.org/software/systemd/man/os-release.html Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> * moved declarations to beginning of functions * dropped unecessary initialization of struct utsname Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17qga: report error on keyfile dump errorMarc-André Lureau1-1/+6
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Cc:qemu-trivial@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17qga-win32: remove a redundancy codePeng Hao1-1/+1
In the first line of run_agent,it has set ga_state = s,don't need set ga_state = s again behind. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17qemu-ga: check if utmpx.h is available on the systemTomáš Golembiovský2-1/+35
Commit 161a56a9065 added command guest-get-users and requires the utmpx.h (defined by POSIX) to work. It is however not always available (e.g. on OpenBSD) therefor a check for its existence is necessary. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17qemu-ga: add missing libpcre to MSI buildThomas Lamprecht1-0/+4
glib depends on libpcre which was not shipped with the MSI, thus starting of the qemu-ga.exe failed with the respective error message. Tell WIXL to ship this library with the MSI to avoid this problem. Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com> CC: Stefan Weil <sw@weilnetz.de> CC: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17qga-win: fix installation on localized windowsDaniel Rempel1-2/+33
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1357789 Replace hardcoded user and group names ("Administrators", "SYSTEM") with the ones acquired from system. Windows uses localized strings for these names and it may cause the installation to fail. Windows has Well-known SIDs for "Administrators" group and "SYSTEM" user so they were used to identify required users and groups. Well-known SIDs: https://support.microsoft.com/en-us/help/243330/well-known-security-identifiers-in-windows-operating-systems Signed-off-by: Daniel Rempel <daniel@daynix.com> Signed-off-by: Sameeh Jubran <sjubran@redhat.com> Reviewed-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17block: fix shadowed variable in bdrv_co_pdiscardDenis V. Lunev1-1/+0
We've had a shadowed 'ret' variable, which risks returning the wrong value, introduced in commit b9c64947. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170710150559.30163-1-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17util/aio-win32: Only select on what we are actually waiting forAlistair Francis1-3/+10
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 9307b70e9876c4e9e3c4478524a32a23a3d5dd05.1499368180.git.alistair.francis@xilinx.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17target/mips: optimize WSBH, DSBH and DSHDAurelien Jarno1-6/+12
Use the same mask to avoid having to load two different constants. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-07-17mips: set CP0 Debug DExcCode for SDBBP instructionPavel Dovgalyuk1-0/+2
This patch fixes setting DExcCode field of CP0 Debug register when SDBBP instruction is executed. According to EJTAG specification, this field must be set to the value 9 (Bp). Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-id: 20170502120350.3368.92338.stgit@PASHA-ISP Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-07-17PPC: E500: Update u-boot to v2017.07Alexander Graf2-0/+0
Quite a while has passed since we last updated U-Boot for e500. This patch bumps it to the last released version 2017.07 to make sure users don't feel like they're using out of date software. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17MAINTAINERS: Add entries for MPS2 boardPeter Maydell1-1/+13
Add entries to the MAINTAINERS file for the new MPS2 board and devices. Since the CMSDK devices are not specific to the MPS2 board, extend the existing 'PrimeCell' section to cover CMSDK devices as well; in both cases these are devices implemented by ARM and provided as RTL that may be used in multiple SoCs and boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-10-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-07-17hw/arm/mps2: Add ethernetPeter Maydell1-1/+9
The MPS2 FPGA images support ethernet via a LAN9220. We use QEMU's LAN9118 model, which is software compatible except that it is missing the checksum-offload feature. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-9-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-07-17hw/arm/mps2: Add SCCPeter Maydell1-1/+16
Add the SCC to the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-8-git-send-email-peter.maydell@linaro.org
2017-07-17hw/misc/mps2_scc: Implement MPS2 Serial Communication ControllerPeter Maydell5-0/+364
Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17hw/arm/mps2: Add timersPeter Maydell1-0/+4
Add the CMSDK APB timers to the MPS2 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-6-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-timer: Implement CMSDK APB timer devicePeter Maydell5-0/+319
Implement a model of the simple timer device found in the CMSDK. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
2017-07-17hw/arm/mps2: Add UARTsPeter Maydell2-1/+89
Add the UARTs to the MPS2 board models. Unfortunately the details of the wiring of the interrupts through various OR gates differ between AN511 and AN385 so this can't be purely a data-driven difference. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1500029487-14822-4-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UARTPeter Maydell5-0/+493
Implement a model of the simple "APB UART" provided in the Cortex-M System Design Kit (CMSDK). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board modelsPeter Maydell3-0/+272
Model the ARM MPS2/MPS2+ FPGA based development board. The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2). Since the CPU itself and most of the devices are in the FPGA, the details of the board as seen by the guest depend significantly on the FPGA image. We model the following FPGA images: "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385 "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511 They are fairly similar but differ in the details for some peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17target/arm: use DISAS_EXIT for eret handlingAlex Bennée2-3/+6
Previously DISAS_JUMP did ensure this but with the optimisation of 8a6b28c7 (optimize indirect branches) we might not leave the loop. This means if any pending interrupts are cleared by changing IRQ flags we might never get around to servicing them. You usually notice this by seeing the lookup_tb_ptr() helper gainfully chaining TBs together while cpu->interrupt_request remains high and the exit_request has not been set. This breaks amongst other things the OPTEE test suite which executes an eret from the secure world after a non-secure world IRQ has gone pending which then never gets serviced. Instead of using the previously implied semantics of DISAS_JUMP we use DISAS_EXIT which will always exit the run-loop. CC: Etienne Carriere <etienne.carriere@linaro.org> CC: Joakim Bech <joakim.bech@linaro.org> CC: Jaroslaw Pelczar <j.pelczar@samsung.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17target/arm: use gen_goto_tb for ISB handlingAlex Bennée2-3/+3
While an ISB will ensure any raised IRQs happen on the next instruction it doesn't cause any to get raised by itself. We can therefore use a simple tb exit for ISB instructions and rely on the exit_request check at the top of each TB to deal with exiting if needed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17target/arm/translate: ensure gen_goto_tb sets exit flagsAlex Bennée1-1/+5
As the gen_goto_tb function can do both static and dynamic jumps it should also set the is_jmp field. This matches the behaviour of the a64 code. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-5-alex.bennee@linaro.org [tweak to multiline comment formatting] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17target/arm/translate.h: expand comment on DISAS_EXITAlex Bennée1-1/+4
We already have an exit condition, DISAS_UPDATE which will exit the run-loop. Expand on the difference with DISAS_EXIT in the comments. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17target/arm/translate: make DISAS_UPDATE match declared semanticsAlex Bennée2-10/+10
DISAS_UPDATE should be used when the wider CPU state other than just the PC has been updated and we should therefore exit the TCG runtime and return to the main execution loop rather assuming DISAS_JUMP would do that. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17include/exec/exec-all: document common exit conditionsAlex Bennée1-3/+26
As a precursor to later patches attempt to come up with a more concrete wording for what each of the common exit cases would be. CC: Emilio G. Cota <cota@braap.org> CC: Richard Henderson <rth@twiddle.net> CC: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 20170713141928.25419-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17target/arm: Make Cortex-M3 and M4 default to 8 PMSA regionsPeter Maydell1-1/+11
The Cortex-M3 and M4 CPUs always have 8 PMSA MPU regions (this isn't a configurable option for the hardware). Make the default value of the pmsav7-dregion property be set per-cpu, so we don't need to have every user of these CPUs set it manually. (The existing default of 16 is correct for the other PMSAv7 core, the Cortex-R5.) This fixes a bug where we were creating the M3 and M4 with too many regions; most guest software would not notice or care, though, since it would just not use the registers associated with the unexpected extra regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1499788408-10096-4-git-send-email-peter.maydell@linaro.org
2017-07-17qdev: support properties which don't set a default valuePeter Maydell3-1/+31
In some situations it's useful to have a qdev property which doesn't automatically set its default value when qdev_property_add_static is called (for instance when the default value is not constant). Support this by adding a flag to the Property struct indicating whether to set the default value. This replaces the existing test for whether the PropertyInfo set_default_value function pointer is NULL, and we set the .set_default field to true for all those cases of struct Property which use a PropertyInfo with a non-NULL set_default_value, so behaviour remains the same as before. This gives us the semantics of: * if .set_default is true, then .info->set_default_value must be not NULL, and .defval is used as the the default value of the property * otherwise, the property system does not set any default, and the field will retain whatever initial value it was given by the device's .instance_init method We define two new macros DEFINE_PROP_SIGNED_NODEFAULT and DEFINE_PROP_UNSIGNED_NODEFAULT, to cover the most plausible use cases of wanting to set an integer property with no default value. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1499788408-10096-3-git-send-email-peter.maydell@linaro.org
2017-07-17qdev-properties.h: Explicitly set the default value for arraylen propertiesPeter Maydell1-0/+1
In DEFINE_PROP_ARRAY, because we use a PropertyInfo (qdev_prop_arraylen) which has a .set_default_value member we will set the field to a default value. That default value will be zero, by the C rule that struct initialization sets unmentioned members to zero if at least one member is initialized. However it's clearer to state it explicitly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1499788408-10096-2-git-send-email-peter.maydell@linaro.org
2017-07-17virtio-net: fix offload ctrl endianJason Wang1-0/+2
Spec said offloads should be le64, so use virtio_ldq_p() to guarantee valid endian. Fixes: 644c98587d4c ("virtio-net: dynamic network offloads configuration") Cc: qemu-stable@nongnu.org Cc: Dmitry Fleytman <dfleytma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17virtion-net: Prefer is_power_of_2()Michal Privoznik1-1/+1
We have a function that checks if given number is power of two. We should prefer it instead of expanding the check on our own. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17docs/colo-proxy.txt: Update colo-proxy usage of net driver with vnet_headerZhang Chen1-0/+26
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/filter-rewriter.c: Make filter-rewriter support vnet_hdr_lenZhang Chen2-3/+38
We add the vnet_hdr_support option for filter-rewriter, default is disabled. If you use virtio-net-pci or other driver needs vnet_hdr, please enable it. You can use it for example: -object filter-rewriter,id=rew0,netdev=hn0,queue=all,vnet_hdr_support We get the vnet_hdr_len from NetClientState that make us parse net packet correctly. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/colo-compare.c: Add vnet packet's tcp/udp/icmp compareZhang Chen1-2/+6
COLO-Proxy just focus on packet payload, so we skip vnet header. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/colo.c: Add vnet packet parse feature in colo-proxyZhang Chen1-3/+3
Make colo-compare and filter-rewriter can parse vnet packet. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/colo-compare.c: Make colo-compare support vnet_hdr_lenZhang Chen2-9/+55
We add the vnet_hdr_support option for colo-compare, default is disabled. If you use virtio-net-pci or other driver needs vnet_hdr, please enable it. You can use it for example: -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support COLO-compare can get vnet header length from filter, Add vnet_hdr_len to struct packet and output packet with the vnet_hdr_len. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/colo-compare.c: Introduce parameter for compare_chr_send()Zhang Chen1-7/+7
This patch change the compare_chr_send() parameter from CharBackend to CompareState, we can get more information like vnet_hdr(We use it to support packet with vnet_header). Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/colo.c: Make vnet_hdr_len as packet propertyZhang Chen4-5/+12
We can use this property flush and send packet with vnet_hdr_len. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/filter-mirror.c: Add new option to enable vnet support for filter-redirectorZhang Chen2-3/+26
We add the vnet_hdr_support option for filter-redirector, default is disabled. If you use virtio-net-pci net driver or other driver needs vnet_hdr, please enable it. Because colo-compare or other modules needs the vnet_hdr_len to parse packet, we add this new option send the len to others. You can use it for example: -object filter-redirector,id=r0,netdev=hn0,queue=tx,outdev=red0,vnet_hdr_support Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net/filter-mirror.c: Make filter mirror support vnet support.Zhang Chen2-4/+43
We add the vnet_hdr_support option for filter-mirror, default is disabled. If you use virtio-net-pci or other driver needs vnet_hdr, please enable it. You can use it for example: -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support If it has vnet_hdr_support flag, we will change the sending packet format from struct {int size; const uint8_t buf[];} to {int size; int vnet_hdr_len; const uint8_t buf[];}. make other module(like colo-compare) know how to parse net packet correctly. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17trace: update old trace events in docsStefan Hajnoczi1-2/+1
Commit c5f1ad429cdf26023cf331075a7d327708e3db6d ("block: Remove bdrv_aio_readv/writev/flush()") removed bdrv_aio_readv()/bdrv_aio_writev() so the example in the tracing documentation is no longer valid. Reported-by: Wang Dong <dongdwdw@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170714133111.27359-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17trace: [trivial] Statically enable all guest eventsLluís Vilanova1-3/+3
The existing optimizations makes it feasible to have them available on all builds. Some quick'n'dirty numbers with 400.perlbench (SPECcpu2006) on the train input (medium size - suns.pl) and the guest_mem_before event: * vanilla, statically disabled real 0m2,259s user 0m2,252s sys 0m0,004s * vanilla, statically enabled (overhead: 2.18x) real 0m4,921s user 0m4,912s sys 0m0,008s * multi-tb, statically disabled (overhead: 0.99x) [within noise range] real 0m2,228s user 0m2,216s sys 0m0,008s * multi-tb, statically enabled (overhead: 0.99x) [within noise range] real 0m2,229s user 0m2,224s sys 0m0,004s Now enabling all events when booting an ARM system that immediately shuts down (https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg04085.html): * vanilla, statically disabled real 0m32,153s user 0m31,276s sys 0m0,108s * vanilla, statically enabled (overhead: 1.35x) real 0m43,507s user 0m42,680s sys 0m0,168s * multi-tb, statically disabled (overhead: 1.03x) real 0m32,993s user 0m32,516s sys 0m0,104s * multi-tb, statically enabled (overhead: 1.00x) [within noise range] real 0m32,110s user 0m31,176s sys 0m0,156s And finally enabling all events using Emilio's dbt-bench (where orig == vanilla, new == multi-tb): NBench score; higher is better 180 +-+--------+----------+----------+---------+----------+----------+----------+----------+----------+---------+----------+--------+-+ | | | *** $$$$%% orig | 160 +-+....................................*.*.$..$.%............................................................orig-enabled +-+ | * * $ $ % new | 140 +-+....................................*.*.$..$.%............................................................new-disabled.......+-+ | * * $ $ % | | * * $ $ % | 120 +-+....................................*.*.$..$.%...............................................................................+-+ | * * $ $ % | | * * $ $ % | 100 +-+....................................*.*.$..$.%.....$$$%%%....................................................................+-+ | * * $ $ % *** $ $ % *** $$$%% | 80 +-+....................................*.*.$..$.%.*.*.$.$..%.*.*.$.$.%..........................................................+-+ | * * $ $ % * * $ $ % * * $ $ % | | * * $ $ % * * $ $ % * * $ $ % | 60 +-+.........................***..$$$%%.*.*##..$.%.*.*.$.$..%.*.*.$.$.%..***.$$$%%...............................................+-+ | **** $$$%% * * $ $ % * * # $ % * *## $ % * * $ $ % * * $ $ % | | * * $ $ % * * $ $ % * * # $ % * * # $ % * *## $ % * * $ $ % | 40 +-+..............*..*.$.$.%.*.*..$.$.%.*.*.#..$.%.*.*.#.$..%.*.*.#.$.%..*.*.$.$.%...............................................+-+ | * * $ $ % * * $ $ % * * # $ % * * # $ % * * # $ % * *## $ % *** $$$%%% | 20 +-+....***.$$$%%.*..*##.$.%.*.*###.$.%.*.*.#..$.%.*.*.#.$..%.*.*.#.$.%..*.*.#.$.%..................................*.*.$.$..%...+-+ | * *## $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * *## $ % | | * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % ***###$$%% ***##$$$%% * * # $ % | 0 +-+----***##$$%%-****##$$%%-***###$$%%-***##$$$%%-***##$$%%%-***##$$%%--***##$$%%-****##$$%%-***###$$%%-***##$$$%%-***##$$%%%---+-+ NUMERIC SORTSTRING SORT BITFIEFP EMULATION ASSIGNMENT IDEA HUFFMAN FOURIER NEURLU DECOMPOSITION gmean png: http://imgur.com/a/8XG5S Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 149915849243.6295.4484103824675839071.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17trace: [tcg, trivial] Re-align generated codeLluís Vilanova6-28/+29
Last patch removed a nesting level in generated code. Re-align all code generated by backends to be 4-column aligned. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 149915824586.6295.17820926011082409033.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>