| Commit message (Collapse) | Author | Files | Lines |
|---|
|
We don't need the MemTxAttrs, so let's simply use the simpler function
variant.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-7-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
We want to pass another flag that will be stored in MemTxAttrs. So pass
MemTxAttrs directly.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-6-david@redhat.com
[peterx: Fix MacOS builds]
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
As documented in commit 4a2e242bbb306 ("memory: Don't use memcpy for
ram_device regions"), we disallow direct access to RAM DEVICE regions.
This change implies that address_space_write_rom() and
cpu_memory_rw_debug() won't be able to write to RAM DEVICE regions. It
will also affect cpu_flush_icache_range(), but it's only used by
hw/core/loader.c after writing to ROM, so it is expected to not apply
here with RAM DEVICE.
This fixes direct access to these regions where we don't want direct
access. We'll extend cpu_memory_rw_debug() next to also be able to write to
these (and IO) regions.
This is a preparation for further changes.
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-5-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
memory_region_supports_direct_access()
Let's factor the complete "directly accessible" check independent of
the "write" condition out so we can reuse it next.
We can now split up the checks RAM and ROMD check, so we really only check
for RAM DEVICE in case of RAM -- ROM DEVICE is neither RAM not RAM DEVICE.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-4-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Let's factor more of the generic "is this directly accessible" check,
independent of the "write" condition out.
Note that the "!mr->rom_device" check in the write case essentially
disallows the memory_region_is_romd() condition again. Further note that
RAM DEVICE regions are also RAM regions, so we can check for RAM+ROMD
first.
This is a preparation for further changes.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-3-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
memory_access_is_direct()
As documented in commit 4a2e242bbb306 ("memory: Don't use memcpy for
ram_device regions"), we disallow direct access to RAM DEVICE regions.
Let's make this clearer to prepare for further changes. Note that romd
regions will never be RAM DEVICE at the same time.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-2-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Punching a hole in a file with fallocate needs to take into account the
fd_offset value for a correct file location.
But guest_memfd internal use doesn't currently consider fd_offset.
Fixes: 4b870dc4d0c0 ("hostmem-file: add offset option")
Signed-off-by: William Roche <william.roche@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250122194053.3103617-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
This replaces use of the constants from the QapiSpecialFeatures
enum, with constants from the auto-generate QapiFeatures enum
in qapi-features.h
The 'deprecated' and 'unstable' features still have a little bit of
special handling, being force defined to be the 1st + 2nd features
in the enum, regardless of whether they're used in the schema. This
retains compatibility with common code that references the features
via the QapiSpecialFeatures constants.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250205123550.2754387-5-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Imports tidied up with isort]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This updates the QAPI code generation to refer to 'features' instead
of 'special_features', in preparation for generalizing their exposure.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250205123550.2754387-4-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Imports tidied up with isort]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The "special_features" field / parameter holds the subset of schema
features that are for internal code use. Specifically 'DEPRECATED'
and 'UNSTABLE'.
This special casing of internal features is going to be removed, so
prepare for that by renaming to 'features'. Using a fixed size type
is also best practice for bit fields.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250205123550.2754387-3-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
When we shortly expose all feature names to code, it will be valid to
include a '-', which must be translated to a '_' for the enum constants.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250205123550.2754387-2-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The upper bound of pointer position in InputMoveEvent should be 0x7fff,
according to INPUT_EVENT_ABS_MAX.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Message-ID: <20250116104433.12114-1-zhangboyang.id@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Phrasing tweak squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
As described in docs/devel/qapi-code-gen.rst line 998,
there should be no space between "Since" and ":".
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-ID: <20241217091504.16416-1-victortoso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory.
include/qapi/qmp/dispatch.h corresponds mostly to qapi/qmp-registry.c.
Move and rename it to include/qapi/qmp-registry.h.
Now just qerror.h is left in include/qapi/qmp/. Since it's deprecated
& (slowly) getting eliminated anyway, it isn't worth moving.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-3-armbru@redhat.com>
|
|
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
|
|
Add a small test to prevent regressions.
Make sure that host_interrupt_signal is not visible to the guest.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-18-alex.bennee@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-17-alex.bennee@linaro.org>
|
|
Allow debugging individual processes in multi-process applications by
starting them with export QEMU_GDB=/tmp/qemu-%d.sock,suspend=n.
Currently one would have to attach to every process to ensure the app
makes progress.
In case suspend=n is not specified, the flow remains unchanged. If it
is specified, then accepting the client connection is delegated to a
thread. In the future this machinery may be reused for handling
reconnections and interruptions.
On accepting a connection, the thread schedules gdb_handlesig() on the
first CPU and wakes it up with host_interrupt_signal. Note that the
result of this gdb_handlesig() invocation is handled, as opposed to
many other existing call sites. These other call sites probably need to
be fixed separately.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-16-alex.bennee@linaro.org>
|
|
Add a function for sending signals to individual threads. It does not make
sense on Windows, so do not provide an implementation, so that if someone
uses it by accident, they will get a linker error.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-15-alex.bennee@linaro.org>
|
|
Attaching to the gdbstub of a running process requires stopping its
threads. For threads that run on a CPU, cpu_exit() is enough, but the
only way to grab attention of a thread that is stuck in a long-running
syscall is to interrupt it with a signal.
Reserve a host realtime signal for this, just like it's already done
for TARGET_SIGABRT on Linux. This may reduce the number of available
guest realtime signals by one, but this is acceptable, since there are
quite a lot of them, and it's unlikely that there are apps that need
them all.
Set signal_pending for the safe_sycall machinery to prevent invoking
the syscall. This is a lie, since we don't queue a guest signal, but
process_pending_signals() can handle the absence of pending signals.
The syscall returns with QEMU_ERESTARTSYS errno, which arranges for
the automatic restart. This is important, because it helps avoiding
disturbing poorly written guests.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-14-alex.bennee@linaro.org>
|
|
gdbstub needs target_to_host_signal(), so move its declaration to a
public header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-13-alex.bennee@linaro.org>
|
|
In case an emulated process execve()s another emulated process, bind()
will fail, because the socket already exists. So try deleting it. Use
the existing unix_listen() function which does this. Link qemu-user
with qemu-sockets.c and add the monitor_get_fd() stub.
Note that it is not possible to handle this in do_execv(): deleting
gdbserver_user_state.socket_path before safe_execve() is not correct,
because the latter may fail, and afterwards we may lose control.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250117001542.8290-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-12-alex.bennee@linaro.org>
|
|
Just like for QEMU_LOG_FILENAME, replace %d with PID in the GDB socket
path. This allows running multi-process applications with, e.g.,
export QEMU_GDB=/tmp/qemu-%d.sock. Currently this is not possible,
since the first process will cause the subsequent ones to fail due to
not being able to bind() the GDB socket.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-11-alex.bennee@linaro.org>
|
|
Choose a few tests per group and move them from the full set to the
smoke set.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20250130184012.5711-3-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-10-alex.bennee@linaro.org>
|
|
Add a new command line option to allow selecting between running the
full set of tests or a smaller set of tests. The default will be to
run the small set (i.e. no comand line option provided) so we can
reduce the amount of tests run by default. Only hosts which support
KVM for the target architecture being tested will run the complete set
of tests.
Adjust the meson.build file to pass in the --full option when
appropriate.
(for now, set the option unconditionally until the next patch actually
creates the small set)
Use cases:
configure --target-list=aarch64-softmmu,ppc64-softmmu,s390x-softmmu,x86_64-softmmu
| before - 615s/244 tests | after - 244s/100 tests
------------------------+--------------------------+-----------------------------
make check | full set for all archs | full set for the KVM arch,
make check-qtest | | small set for the rest
| |
qemu-system-$ARCH | full set for $ARCH | small set for $ARCH, KVM or
./migration-test | | TCG automatically chosen
| |
qemu-system-$ARCH | N/A | full set for $ARCH, KVM or
./migration-test --full | | TCG automatically chosen
| |
migration-compat-x86_64 | full set for x86_64 | small set for x86_64
CI job | |
------------------------+--------------------------+-----------------------------
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20250130184012.5711-2-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-9-alex.bennee@linaro.org>
|
|
This reverts commit bc02be4508d8753d1f6071b77d10f4661587df6f.
Now we catch attempts to clock_step to the next timer when none are
enabled we can revert the previous attempt to prevent deadlock. As
long as a new target time is given we will move time forward even if
no timers will fire. This is desirable for tests which are checking
that nothing changes when things are disabled.
Previously most tests got away with it because --enable-slirp always
has a timer running while the test is active.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-8-alex.bennee@linaro.org>
|
|
It is invalid to call clock_step with an implied time to step forward
as if no timers are running we won't be able to advance.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-7-alex.bennee@linaro.org>
|
|
qtest_send_prefix never actually sent something over the chardev, all
it does is print the timestamp to the QTEST_LOG when enabled. So
rename the function, make it static, remove the unused CharDev and
simplify all the call sites by handling that directly with
qtest_send (and qtest_log_send).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-6-alex.bennee@linaro.org>
|
|
Don't both creating a GString to temporarily hold our qtest command.
Instead do a simpler g_strndup and use autofree to clean up
afterwards.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-5-alex.bennee@linaro.org>
|
|
Until there are timers enabled the semantics of clock_step_next() will
fail. Since d524441a36 (system/qtest: properly feedback results of
clock_[step|set]) we will signal a FAIL if time doesn't advance.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-4-alex.bennee@linaro.org>
|
|
This replicates the changes from 92cb8f8bf6 (tests/qtest: remove
clock_steps from virtio tests) as there are no timers in the virtio
code. We still busy wait and timeout though.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-3-alex.bennee@linaro.org>
|
|
This allows people to run the test locally:
make docker-test-rust@fedora-rust-nightly
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-2-alex.bennee@linaro.org>
|
|
missing_const_for_fn is not necessarily useful or good. For example in
a private API you can always add const later, and in a public API
it can be unnecessarily restrictive to annotate everything with const
(blocking further improvements to the API).
Nevertheless, QEMU turns it on because qemu_api uses const quite
aggressively and therefore it can be handy to have as much as possible
annotated with const. Outside qemu_api though, not so much: devices
are self contained consumers and if there is nothing that could use
their functions in const contexts that were not anticipated.
Since missing_const_for_fn can be a bit noisy and trigger on trivial
functions that no one would ever call in const context, do not
turn it on everywhere and only keep it in qemu_api as a special case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We deprecated i686 system mode support for qemu 8.0. However, to
make real cleanups to TCG we need to deprecate all 32-bit hosts.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
For system mode, we can rarely support the amount of RAM that
the guest requires. TCG emulation is restricted to round-robin
mode, which solves many of the atomicity issues, but not those
associated with virtio. In any case, round-robin does nothing
to help the speed of emulation.
For user mode, most emulation does not succeed at all. Most
of the time we cannot even load 64-bit non-PIE binaries due
to lack of a 64-bit address space. Threads are run in
parallel, not round-robin, which means that atomicity
is not handled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This is now handled by the configs/targets/*.mak fragment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Define TARGET_LONG_BITS in each target's configure fragment.
Do this without removing the define in target/*/cpu-param.h
so that errors are caught like so:
In file included from .../src/include/exec/cpu-defs.h:26,
from ../src/target/hppa/cpu.h:24,
from ../src/linux-user/qemu.h:4,
from ../src/linux-user/hppa/cpu_loop.c:21:
../src/target/hppa/cpu-param.h:11: error: "TARGET_LONG_BITS" redefined [-Werror]
11 | #define TARGET_LONG_BITS 64
|
In file included from .../src/include/qemu/osdep.h:36,
from ../src/linux-user/hppa/cpu_loop.c:20:
./hppa-linux-user-config-target.h:32: note: this is the location of the previous definition
32 | #define TARGET_LONG_BITS 32
|
cc1: all warnings being treated as errors
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Configuration of 64-bit host on 32-bit guest will shortly
be denied. Use a 32-bit guest instead.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Require a 64-bit host binary to spawn a 64-bit guest.
For HVF this is trivially true because macOS 11 dropped
support for 32-bit applications entirely.
For NVMM, NetBSD only enables nvmm on x86_64:
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/nvmm/Makefile?rev=1.1.6.2;content-type=text%2Fplain
For WHPX, we have already dropped support for 32-bit Windows.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Require a 64-bit host binary to spawn a 64-bit guest.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Require a 64-bit host binary to spawn a 64-bit guest.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This reverts commit dae0ec159f9 ("accel: build tcg modular").
The attempt was only enabled for x86, only modularized a small
portion of tcg, and in more than 3 years there have been no
follow-ups to improve the situation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
glibc 2.41+ has added [1] definitions for sched_setattr and
sched_getattr functions and struct sched_attr. Therefore, it needs
to be checked for here as well before defining sched_attr, to avoid
a compilation failure.
Define sched_attr conditionally only when SCHED_ATTR_SIZE_VER0 is
not defined.
[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=21571ca0d70302909cf72707b2a7736cf12190a0;hp=298bc488fdc047da37482f4003023cb9adef78f8
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2799
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The '-old-param' command line option is specific to Arm targets; it
is very briefly documented as "old param mode". What this option
actually does is change the behaviour when directly booting a guest
kernel, so that command line arguments are passed to the kernel using
the extremely old "param_struct" ABI, rather than the newer ATAGS or
even newer DTB mechanisms.
This support was added back in 2007 to support an old vendor kernel
on the akita/terrier board types:
https://mail.gnu.org/archive/html/qemu-devel/2007-07/msg00344.html
Even then, it was an out-of-date mechanism from the kernel's
point of view -- the kernel has had a comment since 2001 marking
it as deprecated. As of mid-2024, the kernel only retained
param_struct support for the RiscPC and Footbridge platforms:
https://lore.kernel.org/linux-arm-kernel/2831c5a6-cfbf-4fe0-b51c-0396e5b0aeb7@app.fastmail.com/
None of the board types QEMU supports need param_struct support;
mark this option as deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250127123113.2947620-1-peter.maydell@linaro.org
|
|
Our current handling of the mask/compare logic in the Cadence
GEM ethernet device is wrong:
(1) we load the same byte twice from rx_buf when
creating the compare value
(2) we ignore the DISABLE_MASK flag
The "Cadence IP for Gigabit Ethernet MAC Part Number: IP7014 IP Rev:
R1p12 - Doc Rev: 1.3 User Guide" states that if the DISABLE_MASK bit
in type2_compare_x_word_1 is set, the mask_value field in
type2_compare_x_word_0 is used as an additional 2 byte Compare Value.
Correct these bugs:
* in the !disable_mask codepath, use lduw_le_p() so we
correctly load a 16-bit value for comparison
* in the disable_mask codepath, we load a full 4-byte value
from rx_buf for the comparison, set the compare value to
the whole of the cr0 register (i.e. the concatenation of
the mask and compare fields), and set mask to 0xffffffff
to force a 32-bit comparison
Signed-off-by: Andrew Yuan <andrew.yuan@jaguarmicro.com>
Message-id: 20241219061658.805-1-andrew.yuan@jaguarmicro.com
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: Expand commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
No need to duplicate and forward the 'num-cpu' property from
TYPE_ARM11MPCORE_PRIV to TYPE_REALVIEW_MPCORE, alias it with
QOM object_property_add_alias().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables. Rename 'd' variable as 'cpu'.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The A9MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|