summary refs log tree commit diff stats
path: root/hw/ppc (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
* ppc/pnv: Use resettable interface to reset child I2C busesGlenn Miles2024-02-231-1/+14
| | | | | | | | | | | | | | | | | | | | | | The QEMU I2C buses and devices use the resettable interface for resetting while the PNV I2C controller and parent buses and devices have not yet transitioned to this new interface and use the old reset strategy. This was preventing the I2C buses and devices wired to the PNV I2C controller from being reset. The short term fix for this is to have the PNV I2C Controller's reset function explicitly call the resettable interface function, bus_cold_reset(), on all child I2C buses. The long term fix should be to transition all PNV parent devices and buses to use the resettable interface so that all child buses and devices are automatically reset. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/pnv: Wire up pca9552 GPIO pins for PCIe hotplug power controlGlenn Miles2024-02-231-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For power10-rainier, a pca9552 device is used for PCIe slot hotplug power control by the Power Hypervisor code. The code expects that some time after it enables power to a PCIe slot by asserting one of the pca9552 GPIO pins 0-4, it should see a "power good" signal asserted on one of pca9552 GPIO pins 5-9. To simulate this behavior, we simply connect the GPIO outputs for pins 0-4 to the GPIO inputs for pins 5-9. Each PCIe slot is assigned 3 GPIO pins on the pca9552 device, for control of up to 5 PCIe slots. The per-slot signal names are: SLOTx_EN.......PHYP uses this as an output to enable slot power. We connect this to the SLOTx_PG pin to simulate a PGOOD signal. SLOTx_PG.......PHYP uses this as in input to detect PGOOD for the slot. For our purposes we just connect this to the SLOTx_EN output. SLOTx_Control..PHYP uses this as an output to prevent a race condition in the real hotplug circuitry, but we can ignore this output for simulation. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/pnv: Add pca9552 to powernv10-rainier for PCIe hotplug power controlGlenn Miles2024-02-232-0/+26
| | | | | | | | | | | The Power Hypervisor code expects to see a pca9552 device connected to the 3rd PNV I2C engine on port 1 at I2C address 0x63 (or left- justified address of 0xC6). This is used by hypervisor code to control PCIe slot power during hotplug events. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/pnv: New powernv10-rainier machine typeGlenn Miles2024-02-231-2/+22
| | | | | | | | | Create a new powernv machine type, powernv10-rainier, that will contain rainier-specific devices. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/pnv: Change powernv default to powernv10Nicholas Piggin2024-02-231-2/+2
| | | | | | | | | | POWER10 is the latest IBM Power machine. Although it is not offered in "OPAL mode" (i.e., powernv configuration), so there is a case that it should remain at powernv9, most of the development work is going into powernv10 at the moment. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* spapr: Tag pseries-2.1 - 2.11 machines as deprecatedCédric Le Goater2024-02-231-0/+1
| | | | | | | | | | | | | pseries machines before version 2.11 have undergone many changes to correct issues, mostly regarding migration compatibility. This is obfuscating the code uselessly and makes maintenance more difficult. Remove them and only keep the last version of the 2.x series, 2.12, still in use by old distros. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/spapr: change pseries machine default to POWER10 CPUNicholas Piggin2024-02-231-1/+1
| | | | | | | POWER10 is the latest pseries CPU. Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/spapr: Initialize max_cpus limit to SPAPR_IRQ_NR_IPIS.Harsh Prateek Bora2024-02-231-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize the machine specific max_cpus limit as per the maximum range of CPU IPIs available. Keeping between 4096 to 8192 will throw IRQ not free error due to XIVE/XICS limitation and keeping beyond 8192 will hit assert in tcg_region_init or spapr_xive_claim_irq. Logs: Without patch fix: [root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097 qemu-system-ppc64: IRQ 4096 is not free [root@host build]# On LPAR: [root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193 ** ERROR:../tcg/region.c:774:tcg_region_init: assertion failed: (region_size >= 2 * page_size) Bail out! ERROR:../tcg/region.c:774:tcg_region_init: assertion failed: (region_size >= 2 * page_size) Aborted (core dumped) [root@host build]# On x86: [root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193 qemu-system-ppc64: ../hw/intc/spapr_xive.c:596: spapr_xive_claim_irq: Assertion `lisn < xive->nr_irqs' failed. Aborted (core dumped) [root@host build]# With patch fix: [root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097 qemu-system-ppc64: Invalid SMP CPUs 4097. The max CPUs supported by machine 'pseries-8.2' is 4096 [root@host build]# Reported-by: Kowshik Jois <kowsjois@linux.ibm.com> Tested-by: Kowshik Jois <kowsjois@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/spapr: Introduce SPAPR_IRQ_NR_IPIS to refer IRQ range for CPU IPIs.Harsh Prateek Bora2024-02-231-2/+4
| | | | | | | | | | | | | spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to the range of CPU IPIs during initialization of nr-irqs property. It is more appropriate to have its own define which can be further reused as appropriate for correct interpretation. Suggested-by: Cedric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Kowshik Jois <kowsjois@linux.ibm.com> Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/spapr: Rename 'softmmu' -> 'vhyp_mmu'Philippe Mathieu-Daudé2024-02-232-1/+1
| | | | | | | | | | | To reduce the use of the term 'softmmu', rename spapr_softmmu.c to spapr_vhyp_mmu.c. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [np: change name] Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/spapr_hcall: Rename {softmmu -> vhyp_mmu}_resize_hpt_prPhilippe Mathieu-Daudé2024-02-232-4/+4
| | | | | | | | | | | | | | | Since 'softmmu' is quite a loaded term in QEMU, rename the vhyp MMU facilities to use the vhyp_mmu_ prefix rather than softmmu_. vhyp_mmu_ is chosen because the code that manipulates the hash table via guest software hypercalls is QEMU's implementation of the PAPR hypervisor interface, called vhyp. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [npiggin: Pick a different name, explain it in changelog.] Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/spapr_hcall: Allow elision of softmmu_resize_hpt_prepPhilippe Mathieu-Daudé2024-02-231-4/+8
| | | | | | | | | | Check tcg_enabled() before calling softmmu_resize_hpt_prepare() and softmmu_resize_hpt_commit() to allow the compiler to elide their calls. The stubs are then unnecessary, remove them. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/spapr: Add missing licensePhilippe Mathieu-Daudé2024-02-231-0/+9
| | | | | | | | | | | | | Commit 9fdf0c2995 ("Start implementing pSeries logical partition machine") added hw/ppc/spapr_hcall.c, then commit 962104f044 ("hw/ppc: moved hcalls that depend on softmmu") extracted the system code to hw/ppc/spapr_softmmu.c. Take the license and copyrights from the original spapr_hcall.c at commit 9fdf0c2995. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [npiggin: Update file description.] Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/pnv_bmc: Use qdev_new() instead of QOM APIPhilippe Mathieu-Daudé2024-02-221-5/+5
| | | | | | | | Prefer QDev API for QDev objects, avoid the underlying QOM layer. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20240216110313.17039-6-philmd@linaro.org>
* hw/ppc/spapr_cpu: Use qdev_is_realized() instead of QOM APIPhilippe Mathieu-Daudé2024-02-221-2/+1
| | | | | | | | Prefer QDev API for QDev objects, avoid the underlying QOM layer. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20240216110313.17039-4-philmd@linaro.org>
* hw/ppc/ppc440_pcix: Move ppc440_pcix.c to hw/pci-host/Philippe Mathieu-Daudé2024-02-224-554/+2
| | | | | | | | | | ppc440_pcix.c is moved from the target specific ppc_ss[] meson source set to pci_ss[] which is common to all targets: the object is built once. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240215105017.57748-5-philmd@linaro.org>
* hw/ppc/ppc4xx_pci: Move ppc4xx_pci.c to hw/pci-host/Philippe Mathieu-Daudé2024-02-224-406/+1
| | | | | | | | | | | | ppc4xx_pci.c is moved from the target specific ppc_ss[] meson source set to pci_ss[] which is common to all targets: the object is built once. Declare PPC4XX_PCI selector in pci-host/Kconfig. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20240215105017.57748-4-philmd@linaro.org>
* hw/ppc/ppc4xx_pci: Extract PCI host definitions to hw/pci-host/ppc4xx.hPhilippe Mathieu-Daudé2024-02-225-2/+5
| | | | | | | Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240215105017.57748-3-philmd@linaro.org>
* hw/ppc/ppc4xx_pci: Remove unused "hw/ppc/ppc.h" headerPhilippe Mathieu-Daudé2024-02-222-2/+0
| | | | | | | Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20240215105017.57748-2-philmd@linaro.org>
* hw/ppc/prep: Realize ISA bridge before accessing itPhilippe Mathieu-Daudé2024-02-151-1/+1
| | | | | | | | | | We should not wire IRQs on unrealized device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213130341.1793-6-philmd@linaro.org>
* hw/ppc/pegasos2: Let pegasos2 machine configure SuperI/O functionsBernhard Beschow2024-02-141-0/+12
| | | | | | | | | | | | | This is a preparation for implementing relocation and toggling of SuperI/O functions in the VT8231 device model. Upon reset, all SuperI/O functions will be deactivated, so in case if no -bios is given, let the machine configure those functions the same way Pegasos II firmware would do. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20240114123911.4877-11-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* target/ppc/cpu-models: Rename power5+ and power7+ for new QOM naming rulesThomas Huth2024-02-051-2/+2
| | | | | | | | | | | | | | | The character "+" is now forbidden in QOM device names (see commit b447378e1217 - "Limit type names to alphanumerical and some few special characters"). For the "power5+" and "power7+" CPU names, there is currently a hack in type_name_is_valid() to still allow them for compatibility reasons. However, there is a much nicer solution for this: Simply use aliases! This way we can still support the old names without the need for the ugly hack in type_name_is_valid(). Message-ID: <20240117141054.73841-2-thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/ppc: use pci_init_nic_devices()David Woodhouse2024-02-024-18/+8
| | | | | Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
* hw/ppc/spapr: use qemu_get_nic_info() and pci_init_nic_devices()David Woodhouse2024-02-021-13/+5
| | | | | | | | | | | Avoid directly referencing nd_table[] by first instantiating any spapr-vlan devices using a qemu_get_nic_info() loop, then calling pci_init_nic_devices() to do the rest. No functional change intended. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
* hw/ppc/prep: use pci_init_nic_devices()David Woodhouse2024-02-021-5/+3
| | | | | | | | | | | | | | Previously, the first PCI NIC would be placed in PCI slot 3 and the rest would be dynamically assigned. Even if the user overrode the default NIC type and made it something other than PCNet. Now, the first PCNet NIC (that is, anything not explicitly specified to be anything different) will go to slot 3 even if it isn't the first NIC specified on the command line. And anything else will be dynamically assigned. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
* qemu/main-loop: rename qemu_cond_wait_iothread() to qemu_cond_wait_bql()Stefan Hajnoczi2024-01-081-1/+1
| | | | | | | | | | | | | | The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL) instead, it is already widely used and unambiguous. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu/main-loop: rename QEMU_IOTHREAD_LOCK_GUARD to BQL_LOCK_GUARDStefan Hajnoczi2024-01-081-1/+1
| | | | | | | | | | | | | | | The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL) instead, it is already widely used and unambiguous. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()Stefan Hajnoczi2024-01-085-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hw: Simplify memory_region_init_ram() callsPhilippe Mathieu-Daudé2024-01-051-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | Mechanical change using the following coccinelle script: @@ expression mr, owner, arg3, arg4, errp; @@ - memory_region_init_ram(mr, owner, arg3, arg4, &errp); if ( - errp + !memory_region_init_ram(mr, owner, arg3, arg4, &errp) ) { ... return; } and removing the local Error variable. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed Reviewed-by: Gavin Shan <gshan@redhat.com> Message-Id: <20231120213301.24349-21-philmd@linaro.org>
* hw: Simplify accesses to the CPUState::'start-powered-off' propertyPhilippe Mathieu-Daudé2024-01-051-1/+1
| | | | | | | | | | | | | | The 'start-powered-off' property has been added to ARM CPUs in commit 5de164304a ("arm: Allow secondary KVM CPUs to be booted via PSCI"), then eventually got generalized to all CPUs in commit c1b701587e ("target/arm: Move start-powered-off property to generic CPUState"). Since all CPUs have it, no need to check whether it is available. Updating this property can't fail, so use &error_abort. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20231123143813.42632-5-philmd@linaro.org>
* hw/ppc/spapr_cpu_core: Access QDev properties with proper APIPhilippe Mathieu-Daudé2024-01-051-1/+1
| | | | | | | | | | | CPUState::start_powered_off field is part of the internal implementation of a QDev CPU. It is exposed as the QDev "start-powered-off" property. External components should use the qdev properties API to access it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20231123143813.42632-2-philmd@linaro.org>
* Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell2024-01-041-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * configure: use a native non-cross compiler for linux-user * meson: cleanups * target/i386: miscellaneous cleanups and optimizations * target/i386: implement CMPccXADD * target/i386: the sgx_epc_get_section stub is reachable * esp: check for NULL result from scsi_device_find() # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWRImYUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNd7AgAgcyJGiMfUkXqhefplpm06RDXQIa8 # FuoJqPb21lO75DQKfaFRAc4xGLagjJROMJGHMm9HvMu2VlwvOydkQlfFRspENxQ/ # 5XzGdb/X0A7HA/mwUfnMB1AZx0Vs32VI5IBSc6acc9fmgeZ84XQEoM3KBQHUik7X # mSkE4eltR9gJ+4IaGo4voZtK+YoVD8nEcuqmnKihSPWizev0FsZ49aNMtaYa9qC/ # Xs3kiQd/zPibHDHJu0ulFsNZgxtUcvlLHTCf8gO4dHWxCFLXGubMush83McpRtNB # Qoh6cTLH+PBXfrxMR3zmTZMNvo8Euls3s07Y8TkNP4vdIIE/kMeMDW1wJw== # =mq30 # -----END PGP SIGNATURE----- # gpg: Signature made Sun 31 Dec 2023 08:12:22 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits) meson.build: report graphics backends separately configure, meson: rename targetos to host_os meson: rename config_all meson: remove CONFIG_ALL meson: remove config_targetos meson: remove CONFIG_POSIX and CONFIG_WIN32 from config_targetos meson: remove OS definitions from config_targetos meson: always probe u2f and canokey if the option is enabled meson: move subdirs to "Collect sources" section meson: move config-host.h definitions together meson: move CFI detection code with other compiler flags meson: keep subprojects together meson: move accelerator dependency checks together meson: move option validation together meson: move program checks together meson: add more sections to main meson.build configure: unify again the case arms in probe_target_compiler configure: remove unnecessary subshell Makefile: clean qemu-iotests output meson: use version_compare() to compare version ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * configure, meson: rename targetos to host_osPaolo Bonzini2023-12-311-1/+1
| | | | | | | | | | | | | | | | This variable is about the host OS, not the target. It is used a lot more since the Meson conversion, but the original sin dates back to 2003. Time to fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * meson: remove OS definitions from config_targetosPaolo Bonzini2023-12-311-3/+5
| | | | | | | | | | | | | | CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but only CONFIG_LINUX has substantial use. Convert them all to if...endif. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | hw/ppc: Constify VMStateRichard Henderson2023-12-3014-38/+38
|/ | | | | Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-48-richard.henderson@linaro.org>
* Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into ↵Stefan Hajnoczi2023-12-202-3/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging * Add compat machines for QEMU 9.0 * Some header clean-ups by Philippe * Restrict type names to alphanumerical range (and a few special characters) * Fix analyze-migration.py script on s390x * Clean up and improve some tests * Document handling of commas in CLI options parameters # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY # Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm # QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs # 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx # KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj # lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA # s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s # pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL # TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK # QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7 # FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I # +VpInjUaPBQ= # =TA1/ # -----END PGP SIGNATURE----- # gpg: Signature made Wed 20 Dec 2023 04:36:11 EST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu: tests/unit/test-qmp-event: Replace fixture by global variables tests/unit/test-qmp-event: Simplify event emission check tests/unit/test-qmp-event: Drop superfluous mutex tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode qemu-options: Clarify handling of commas in options parameters tests/qtest/migration-test: Fix analyze-migration.py for s390x qom/object: Limit type names to alphanumerical and some few special characters tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name hw: Replace anti-social QOM type names (again) docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl" target: Restrict 'sysemu/reset.h' to system emulation hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header system/qtest: Restrict QTest API to system emulation system/qtest: Include missing 'hw/core/cpu.h' header MAINTAINERS: Add some more vmware-related files to the corresponding section hw: Add compat machines for 9.0 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
| * hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included headerPhilippe Mathieu-Daudé2023-12-201-1/+0
| | | | | | | | | | | | | | | | Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231212113640.30287-2-philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
| * hw: Add compat machines for 9.0Cornelia Huck2023-12-201-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | Add 9.0 machine types for arm/i440fx/m68k/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-ID: <20231120094259.1191804-1-cohuck@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> # s390x Signed-off-by: Thomas Huth <thuth@redhat.com>
* | hw/ppc/Kconfig: Imply VFIO_PCICédric Le Goater2023-12-192-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the legacy and iommufd backends were introduced, a set of common vfio-pci routines were exported in pci.c for both backends to use : vfio_pci_pre_reset vfio_pci_get_pci_hot_reset_info vfio_pci_host_match vfio_pci_post_reset This introduced a build failure on PPC when --without-default-devices is use because VFIO is always selected in ppc/Kconfig but VFIO_PCI is not. Use an 'imply VFIO_PCI' in ppc/Kconfig and bypass compilation of the VFIO EEH hooks routines defined in hw/ppc/spapr_pci_vfio.c with CONFIG_VFIO_PCI. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
* | vfio/container: Move space field to base containerEric Auger2023-12-191-5/+5
|/ | | | | | | | | | | | | | Move the space field to the base object. Also the VFIOAddressSpace now contains a list of base containers. No functional change intended. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
* ppc/amigaone: Allow running AmigaOS without firmware imageBALATON Zoltan2023-11-301-12/+23
| | | | | | | | | | | | | | The machine uses a modified U-Boot under GPL license but the sources of it are lost with only a binary available so it cannot be included in QEMU. Allow running without the firmware image which can be used when calling a boot loader directly and thus simplifying booting guests. We need a small routine that AmigaOS calls from ROM which is added in this case to allow booting AmigaOS without external firmware image. Fixes: d9656f860a38 ("hw/ppc: Add emulation of AmigaOne XE board") Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/pnv: Fix PNV I2C invalid status after resetGlenn Miles2023-11-211-24/+18
| | | | | | | | | | | | | | The PNV I2C Controller was clearing the status register after a reset without repopulating the "upper threshold for I2C ports", "Command Complete" and the SCL/SDA input level fields. Fixed this for resets caused by a system reset as well as from writing to the "Immediate Reset" register. Fixes: 263b81ee15af ("ppc/pnv: Add an I2C controller model") Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* ppc/pnv: PNV I2C engines assigned incorrect XSCOM addressesGlenn Miles2023-11-212-3/+5
| | | | | | | | | | | | | | The PNV I2C engines for power9 and power10 were being assigned a base XSCOM address that was off by one I2C engine's address range such that engine 0 had engine 1's address and so on. The xscom address assignment was being based on the device tree engine numbering, which starts at 1. Rather than changing the device tree numbering to start with 0, the addressing was changed to be based on the existing device tree numbers minus one. Fixes: 1ceda19c28a1 ("ppc/pnv: Connect PNV I2C controller to powernv10) Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* ppc/pnv: Fix potential overflow in I2C modelCédric Le Goater2023-11-211-1/+7
| | | | | | | | | | | | | | | Coverity warns that "i2c_bus_busy(i2c->busses[i]) << i" might overflow because the expression is evaluated using 32-bit arithmetic and then used in a context expecting a uint64_t. While we are at it, introduce a PNV_I2C_MAX_BUSSES constant and check the number of busses at realize time. Fixes: Coverity CID 1523918 Cc: Glenn Miles <milesg@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* spapr/pci: Correct "does not support hotplugging error messagesMarkus Armbruster2023-11-171-2/+2
| | | | | | | | | | | When dynamic-reconfiguration is off, hot plug / unplug can fail with "Bus 'spapr-pci-host-bridge' does not support hotplugging". spapr-pci-host-bridge is a device, not a bus. Report the name of the bus it provides instead: 'pci.0'. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20231031111059.3407803-2-armbru@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* Merge tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu into stagingStefan Hajnoczi2023-11-086-3/+936
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ppc patch queue for 2023-11-07: This queue, the last one before the 8.2 feature freeze, has miscellanous changes that includes new PowerNV features and the new AmigaONE XE board. # -----BEGIN PGP SIGNATURE----- # # iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0 # MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F # CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg== # =cnHS # -----END PGP SIGNATURE----- # gpg: Signature made Wed 08 Nov 2023 04:46:49 HKT # gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164 # gpg: issuer "danielhb413@gmail.com" # gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown] # gpg: WARNING: The key's User ID is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164 * tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu: ppc: qtest already exports qtest_rtas_call() hw/pci-host: Update PHB5 XSCOM registers ppc/pnv: Fix number of I2C engines and ports for power9/10 ppc/pnv: Connect PNV I2C controller to powernv10 ppc/pnv: Connect I2C controller model to powernv9 chip ppc/pnv: Add an I2C controller model tests/avocado: Add test for amigaone board hw/ppc: Add emulation of AmigaOne XE board hw/pci-host: Add emulation of Mai Logic Articia S Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
| * ppc: qtest already exports qtest_rtas_call()Juan Quintela2023-11-071-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having two functions with the same name is a bad idea. As spapr only uses the function locally, made it static. When you compile with clang, you get this compilation error: /usr/bin/ld: tests/qtest/libqos/libqos.fa.p/.._libqtest.c.o: in function `qtest_rtas_call': /scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/tests/qtest/libqtest.c:1195: multiple definition of `qtest_rtas_call'; libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_rtas.c.o:/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/hw/ppc/spapr_rtas.c:536: first defined here clang-16: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. make: *** [Makefile:162: run-ninja] Error 1 Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20231030163834.4638-1-quintela@redhat.com> [dhb: remove 'spapr_rtas.h' include from spapr_rtas.c] Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
| * ppc/pnv: Fix number of I2C engines and ports for power9/10Glenn Miles2023-11-071-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Power9 is supposed to have 4 PIB-connected I2C engines with the following number of ports on each engine: 0: 2 1: 13 2: 2 3: 2 Power10 also has 4 engines but has the following number of ports on each engine: 0: 14 1: 14 2: 2 3: 16 Current code assumes that they all have the same (maximum) number. This can be a problem if software expects to see a certain number of ports present (Power Hypervisor seems to care). Fixed this by adding separate tables for power9 and power10 that map the I2C controller number to the number of I2C buses that should be attached for that engine. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Message-ID: <20231025152714.956664-1-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
| * ppc/pnv: Connect PNV I2C controller to powernv10Glenn Miles2023-11-071-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Wires up four I2C controller instances to the powernv10 chip XSCOM address space. Each controller instance is wired up to two I2C buses of its own. No other I2C devices are connected to the buses at this time. Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20231017221434.810363-1-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
| * ppc/pnv: Connect I2C controller model to powernv9 chipCédric Le Goater2023-11-071-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wires up three I2C controller instances to the powernv9 chip XSCOM address space. Each controller instance is wired up to a single I2C bus of its own. No other I2C devices are connected to the buses at this time. Signed-off-by: Cédric Le Goater <clg@kaod.org> [milesg: Split wiring from addition of model itself] [milesg: Added new commit message] [milesg: Moved hardcoded attributes into PnvChipClass] [milesg: Removed TODO comment for I2C] Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <20231016222013.3739530-3-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>