summary refs log tree commit diff stats
path: root/hw/virtio/vhost-user-input-pci.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2023-06-28hw/nvme: add comment for nvme-ns propertiesMinwoo Im1-1/+8
Add more comments of existing properties for nvme-ns device. Signed-off-by: Minwoo Im <minwoo.im@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2023-06-26accel/tcg: Renumber TLB_DISCARD_WRITERichard Henderson2-3/+3
Move to fill a hole in the set of bits. Reduce the total number of tlb bits by 1. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Move TLB_WATCHPOINT to TLB_SLOW_FLAGS_MASKRichard Henderson2-8/+18
This frees up one bit of the primary tlb flags without impacting the TLB_NOTDIRTY logic. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Store some tlb flags in CPUTLBEntryFullRichard Henderson4-43/+81
We have run out of bits we can use within the CPUTLBEntry comparators, as TLB_FLAGS_MASK cannot overlap alignment. Store slow_flags[] in CPUTLBEntryFull, and merge with the flags from the comparator. A new TLB_FORCE_SLOW bit is set within the comparator as an indication that the slow path must be used. Move TLB_BSWAP to TLB_SLOW_FLAGS_MASK. Since we are out of bits, we cannot create a new bit without moving an old one. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Remove check_tcg_memory_orders_compatibleRichard Henderson1-27/+8
We now issue host memory barriers to match the guest memory order. Continue to disable MTTCG only if the guest has not been ported. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26tcg: Add host memory barriers to cpu_ldst.h interfacesRichard Henderson3-0/+54
Bring the helpers into line with the rest of tcg in respecting guest memory ordering. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26tcg: Do not elide memory barriers for !CF_PARALLEL in system modeRichard Henderson1-1/+13
The virtio devices require proper memory ordering between the vcpus and the iothreads. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26target/microblaze: Define TCG_GUEST_DEFAULT_MORichard Henderson1-0/+3
The microblaze architecture does not reorder instructions. While there is an MBAR wait-for-data-access instruction, this concerns synchronizing with DMA. This should have been defined when enabling MTTCG. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Fixes: d449561b130 ("configure: microblaze: Enable mttcg") Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26tcg: Fix temporary variable in tcg_gen_gvec_andcsMax Chou1-1/+1
The 5th parameter of tcg_gen_gvec_2s should be replaced by the temporary tmp variable in the tcg_gen_gvec_andcs function. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Max Chou <max.chou@sifive.com> Message-Id: <20230622161646.32005-9-max.chou@sifive.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: remove CONFIG_PROFILERFei Wu13-375/+0
TBStats will be introduced to replace CONFIG_PROFILER totally, here remove all CONFIG_PROFILER related stuffs first. Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Fei Wu <fei2.wu@intel.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26tests/plugin: Remove duplicate insn log from libinsn.soRichard Henderson4-32/+1
This is a perfectly natural occurrence for x86 "rep movb", where the "rep" prefix forms a counted loop of the one insn. During the tests/tcg/multiarch/memory test, this logging is triggered over 350000 times. Within the context of cross-i386-tci build, which is already slow by nature, the logging is sufficient to push the test into timeout. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26softfloat: use QEMU_FLATTEN to avoid mistaken isra inliningAlex Bennée1-11/+11
Balton discovered that asserts for the extract/deposit calls had a significant impact on a lame benchmark on qemu-ppc. Replicating with: ./qemu-ppc64 ~/lsrc/tests/lame.git-svn/builds/ppc64/frontend/lame \ -h pts-trondheim-3.wav pts-trondheim-3.mp3 showed up the pack/unpack routines not eliding the assert checks as it should have done causing them to prominently figure in the profile:  11.44%  qemu-ppc64  qemu-ppc64               [.] unpack_raw64.isra.0  11.03%  qemu-ppc64  qemu-ppc64               [.] parts64_uncanon_normal   8.26%  qemu-ppc64  qemu-ppc64               [.] helper_compute_fprf_float64   6.75%  qemu-ppc64  qemu-ppc64               [.] do_float_check_status   5.34%  qemu-ppc64  qemu-ppc64               [.] parts64_muladd   4.75%  qemu-ppc64  qemu-ppc64               [.] pack_raw64.isra.0   4.38%  qemu-ppc64  qemu-ppc64               [.] parts64_canonicalize   3.62%  qemu-ppc64  qemu-ppc64               [.] float64r32_round_pack_canonical After this patch the same test runs 31 seconds faster with a profile where the generated code dominates more: + 14.12% 0.00% qemu-ppc64 [unknown] [.] 0x0000004000619420 + 13.30% 0.00% qemu-ppc64 [unknown] [.] 0x0000004000616850 + 12.58% 12.19% qemu-ppc64 qemu-ppc64 [.] parts64_uncanon_normal + 10.62% 0.00% qemu-ppc64 [unknown] [.] 0x000000400061bf70 + 9.91% 9.73% qemu-ppc64 qemu-ppc64 [.] helper_compute_fprf_float64 + 7.84% 7.82% qemu-ppc64 qemu-ppc64 [.] do_float_check_status + 6.47% 5.78% qemu-ppc64 qemu-ppc64 [.] parts64_canonicalize.constprop.0 + 6.46% 0.00% qemu-ppc64 [unknown] [.] 0x0000004000620130 + 6.42% 0.00% qemu-ppc64 [unknown] [.] 0x0000004000619400 + 6.17% 6.04% qemu-ppc64 qemu-ppc64 [.] parts64_muladd + 5.85% 0.00% qemu-ppc64 [unknown] [.] 0x00000040006167e0 + 5.74% 0.00% qemu-ppc64 [unknown] [.] 0x0000b693fcffffd3 + 5.45% 4.78% qemu-ppc64 qemu-ppc64 [.] float64r32_round_pack_canonical Suggested-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <ec9cfe5a-d5f2-466d-34dc-c35817e7e010@linaro.org> [AJB: Patchified rth's suggestion] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20230523131107.3680641-1-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26cpu: Replace target_ulong with hwaddr in tb_invalidate_phys_addr()Anton Johansson2-2/+2
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-13-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Replace target_ulong with vaddr in translator_*()Anton Johansson2-8/+8
Use vaddr for guest virtual address in translator_use_goto_tb() and translator_loop(). Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-11-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Replace target_ulong with vaddr in *_mmu_lookup()Anton Johansson2-6/+6
Update atomic_mmu_lookup() and cpu_mmu_lookup() to take the guest virtual address as a vaddr instead of a target_ulong. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-10-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel: Replace target_ulong with vaddr in probe_*()Anton Johansson4-19/+19
Functions for probing memory accesses (and functions that call these) are updated to take a vaddr for guest virtual addresses over target_ulong. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-9-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg: Widen pc to vaddr in CPUJumpCacheAnton Johansson3-8/+8
Related functions dealing with the jump cache are also updated. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-8-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg/cpu-exec.c: Widen pc to vaddrAnton Johansson1-17/+17
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-7-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg/cputlb.c: Widen addr in MMULookupPageDataAnton Johansson1-15/+15
Functions accessing MMULookupPageData are also updated. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-6-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg/cputlb.c: Widen CPUTLBEntry access functionsAnton Johansson2-9/+9
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-5-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26target: Widen pc/cs_base in cpu_get_tb_cpu_stateAnton Johansson26-58/+58
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-4-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel/tcg/translate-all.c: Widen pc and cs_baseAnton Johansson2-8/+8
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-3-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26accel: Replace target_ulong in tlb_*()Anton Johansson6-135/+131
Replaces target_ulong with vaddr for guest virtual addresses in tlb_*() functions and auxilliary structs. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-2-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is presentAni Sinha1-0/+8
When a peer nic is still attached to the vdpa backend, it is too early to free up the vhost-net and vdpa structures. If these structures are freed here, then QEMU crashes when the guest is being shut down. The following call chain would result in an assertion failure since the pointer returned from vhost_vdpa_get_vhost_net() would be NULL: do_vm_stop() -> vm_state_notify() -> virtio_set_status() -> virtio_net_vhost_status() -> get_vhost_net(). Therefore, we defer freeing up the structures until at guest shutdown time when qemu_cleanup() calls net_cleanup() which then calls qemu_del_net_client() which would eventually call vhost_vdpa_cleanup() again to free up the structures. This time, the loop in net_cleanup() ensures that vhost_vdpa_cleanup() will be called one last time when all the peer nics are detached and freed. All unit tests pass with this change. CC: imammedo@redhat.com CC: jusual@redhat.com CC: mst@redhat.com Fixes: CVE-2023-3301 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929 Signed-off-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230619065209.442185-1-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vhost_net: add an assertion for TAP client backendsAni Sinha1-0/+1
An assertion was missing for tap vhost backends that enforces a non-null reference from get_vhost_net(). Both vhost-net-user and vhost-net-vdpa enforces this. Enforce the same for tap. Unit tests pass with this change. Signed-off-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230619041501.111655-1-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2023-06-26intel_iommu: Fix address space unmapZhenzhong Duan1-1/+1
During address space unmap, corresponding IOVA tree entries are also removed. But DMAMap is set beyond notifier's scope by 1, so in theory there is possibility to remove a continuous entry above the notifier's scope but falling in adjacent notifier's scope. There is no issue currently as no use cases allocate notifiers continuously, but let's be robust. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20230615032626.314476-4-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26intel_iommu: Fix flag check in replayZhenzhong Duan1-1/+1
Replay doesn't notify registered notifiers but the one passed to it. So it's meaningless to check the registered notifier's synthetic flag. There is no issue currently as all replay use cases have MAP flag set, but let's be robust. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20230615032626.314476-3-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26intel_iommu: Fix a potential issue in VFIO dirty page syncZhenzhong Duan1-6/+3
Peter Xu found a potential issue: "The other thing is when I am looking at the new code I found that we actually extended the replay() to be used also in dirty tracking of vfio, in vfio_sync_dirty_bitmap(). For that maybe it's already broken if unmap_all() because afaiu log_sync() can be called in migration thread anytime during DMA so I think it means the device is prone to DMA with the IOMMU pgtable quickly erased and rebuilt here, which means the DMA could fail unexpectedly. Copy Alex, Kirti and Neo." Fix it by replacing the unmap_all() to only evacuate the iova tree (keeping all host mappings untouched, IOW, don't notify UNMAP), and do a full resync in page walk which will notify all existing mappings as MAP. This way we don't interrupt with any existing mapping if there is (e.g. for the dirty sync case), meanwhile we keep sync too to latest (for moving a vfio device into an existing iommu group). Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20230615032626.314476-2-zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vhost-user: fully use new backend/frontend namingManos Pitsidianakis12-72/+74
Slave/master nomenclature was replaced with backend/frontend in commit 1fc19b65279a ("vhost-user: Adopt new backend naming") This patch replaces all remaining uses of master and slave in the codebase. Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-06-26virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()Stefan Hajnoczi1-2/+18
virtio_scsi_dataplane_stop() calls blk_drain_all(), which invokes ->drained_begin()/->drained_end() after we've already detached the host notifier. virtio_scsi_drained_end() currently attaches the host notifier again and leaves it dangling after dataplane has stopped. This results in the following assertion failure because virtio_scsi_defer_to_dataplane() is called from the IOThread instead of the main loop thread: qemu-system-x86_64: ../softmmu/memory.c:1111: memory_region_transaction_commit: Assertion `qemu_mutex_iothread_locked()' failed. Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1680 Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230611193924.2444914-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26hw/i386/pc: Clean up pc_machine_initfnSuravee Suthikulpanit1-1/+1
To use the newly introduced PC machine class local variable. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230609164107.23404-1-suravee.suthikulpanit@amd.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: fix not using CVQ buffer in case of errorEugenio Pérez1-1/+1
Bug introducing when refactoring. Otherway, the guest never received the used buffer. Fixes: be4278b65fc1 ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173451.1917999-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-26vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devicesEugenio Pérez1-0/+1
QEMU does not emulate it so it must be disabled as long as the backend does not support it. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173328.1917385-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-26vhost: fix vhost_dev_enable_notifiers() error caseLaurent Vivier1-29/+36
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true) fails, we call vhost_dev_disable_notifiers() that executes virtio_bus_set_host_notifier(false) on all queues, even on queues that have failed to be initialized. This triggers a core dump in memory_region_del_eventfd(): virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24) vhost VQ 1 notifier binding failed: 24 .../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed. Fix the problem by providing to vhost_dev_disable_notifiers() the number of queues to disable. Fixes: 8771589b6f81 ("vhost: simplify vhost_dev_enable_notifiers") Cc: longpeng2@huawei.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20230602162735.3670785-1-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-26vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQHawkins Jiawei1-0/+1
Enable SVQ with VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <778d642ecae6deed8a218b0e6232e4d7bb96b439.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: Add vhost_vdpa_net_load_offloads()Hawkins Jiawei1-0/+42
This patch introduces vhost_vdpa_net_load_offloads() to restore offloads state at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <7e2b5cad9c48c917df53d80dec27dbfeb513e1a3.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26virtio-net: expose virtio_net_supported_guest_offloads()Hawkins Jiawei2-1/+2
To support restoring offloads state in vdpa, it is necessary to expose the function virtio_net_supported_guest_offloads(). According to VirtIO standard, "Upon feature negotiation corresponding offload gets enabled to preserve backward compatibility.". Therefore, QEMU uses this function to get the device supported offloads. This allows QEMU to know the device's defaults and skip the control message sending if these defaults align with the driver's configuration. Note that the device's defaults can mismatch the driver's configuration only at live migration. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <43679506f3f039a7aa2bdd5b49785107b5dfd7d4.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26hw/net/virtio-net: make some VirtIONet constHawkins Jiawei1-1/+1
The VirtIONet structure is not modified in virtio_net_supported_guest_offloads(). Therefore, make it const to allow this function to accept const variables. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <489b09c3998ac09b9135e57a7dd8c56a4be8cdf9.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: reuse virtio_vdev_has_feature()Hawkins Jiawei1-4/+2
We can use virtio_vdev_has_feature() instead of manually accessing the features. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <ff838d30206209fd865511b16ffb34cc0d5e8d8f.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26include/hw/virtio: make some VirtIODevice constHawkins Jiawei1-1/+1
The VirtIODevice structure is not modified in virtio_vdev_has_feature(). Therefore, make it const to allow this function to accept const variables. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Reviewed-by: Eugenio Pérez Martin <eperezma@redhat.com> Message-Id: <16c0561b921310a32c240a4fb6e8cee3ffee16fe.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: map shadow vrings with MAP_SHAREDEugenio Pérez2-17/+17
The vdpa devices that use va addresses neeeds these maps shared. Otherwise, vhost_vdpa checks will refuse to accept the maps. The mmap call will always return a page aligned address, so removing the qemu_memalign call. Keeping the ROUND_UP for the size as we still need to DMA-map them in full. Not applying fixes tag as it never worked with va devices. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-4-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len functionEugenio Pérez1-16/+16
We need to call it from resource cleanup context, as munmap needs the size of the mappings. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230602143854.1879091-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: do not block migration if device has cvq and x-svq=onEugenio Pérez1-4/+7
It was a mistake to forbid in all cases, as SVQ is already able to send all the CVQ messages before start forwarding data vqs. It actually caused a regression, making impossible to migrate device previously migratable. Fixes: 36e4647247f2 ("vdpa: add vhost_vdpa_net_valid_svq_features") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-2-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-26pc: q35: Bump max_cpus to 1024Suravee Suthikulpanit1-1/+2
Since KVM_MAX_VCPUS is currently defined to 1024 for x86 as shown in arch/x86/include/asm/kvm_host.h, update QEMU limits to the same number. In case KVM could not support the specified number of vcpus, QEMU would return the following error message: qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (xxx): Invalid argument Also, keep max_cpus at 288 for machine version 8.0 and older. Cc: Igor Mammedov <imammedo@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230607205717.737749-3-suravee.suthikulpanit@amd.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-06-26tests/data/acpi: update after SMBIOS 2.0 changeMichael S. Tsirkin2-1/+0
Switching to SMBIOS3.0 by default shifts some addresses, so we get this change in tests/data/acpi/q35/SSDT.dimmpxm : @@ -389,6 +389,6 @@ } } - Name (MEMA, 0x07FFE000) + Name (MEMA, 0x07FFF000) } update the expected file to match. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26hw/i386/pc: Default to use SMBIOS 3.0 for newer machine modelsSuravee Suthikulpanit5-1/+15
Currently, pc-q35 and pc-i44fx machine models are default to use SMBIOS 2.8 (32-bit entry point). Since SMBIOS 3.0 (64-bit entry point) is now fully supported since QEMU 7.0, default to use SMBIOS 3.0 for newer machine models. This is necessary to avoid the following message when launching a VM with large number of vcpus. "SMBIOS 2.1 table length 66822 exceeds 65535" Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230607205717.737749-2-suravee.suthikulpanit@amd.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2023-06-26hw/acpi: Fix PM control register accessBALATON Zoltan1-26/+26
On pegasos2 which has ACPI as part of VT8231 south bridge the board firmware writes PM control register by accessing the second byte so addr will be 1. This wasn't handled correctly and the write went to addr 0 instead. Remove the acpi_pm1_cnt_write() function which is used only once and does not take addr into account and handle non-zero address in acpi_pm_cnt_{read|write}. This fixes ACPI shutdown with pegasos2 firmware. The issue below is possibly related to the same memory core bug. Link: https://gitlab.com/qemu-project/qemu/-/issues/360 Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20230607200125.A9988746377@zero.eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26git-submodule.sh: allow running in validate mode without previous updatePaolo Bonzini2-33/+42
The call to git-submodule.sh done in configure may happen without a previous checkout of the roms/SLOF submodule, or even without a previous run of the script. So, handle creating a .git-submodule-status file even in validate mode. If git is absent, ensure that all passed directories exists (because you should be in a fresh untar and will not have stale arguments to git-submodule.sh) but do no other checks. If git is present, ensure that .git-submodule-status contains an entry for all submodules passed on the command line. With this change, "ignore" mode is not needed anymore. Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Fixes: b11f9bd96f4 ("configure: move SLOF submodule handling to pc-bios/s390-ccw", 2023-06-06) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: implement SYSCALL/SYSRET in 32-bit emulatorsPaolo Bonzini8-17/+20
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only exposes it for 64-bit targets. For system emulation just reuse the helper; for user-mode emulation the ABI is the same as "int $80". The BSDs does not support any fast system call mechanism in 32-bit mode so add to bsd-user the same stub that FreeBSD has for 64-bit compatibility mode. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: implement RDPID in TCGPaolo Bonzini5-13/+46
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged so for user-mode emulation we must provide the value that the kernel places in the MSR. For Linux, it is a combination of the current CPU and the current NUMA node, both of which can be retrieved with getcpu(2). Also try sched_getcpu(), which might be there on the BSDs. If there is no portable way to retrieve the current CPU id from userspace, return 0. RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms of serializability are not relevant to QEMU. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>